sys/cam/mmc/mmc_da.c

   1 /*-
   2  * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
   3  *
   4  * Copyright (c) 2006 Bernd Walter <tisco@FreeBSD.org>
   5  * Copyright (c) 2006 M. Warner Losh <imp@FreeBSD.org>
   6  * Copyright (c) 2009 Alexander Motin <mav@FreeBSD.org>
   7  * Copyright (c) 2015-2017 Ilya Bakulin <kibab@FreeBSD.org>
   8  * All rights reserved.
   9  *
  10  * Redistribution and use in source and binary forms, with or without
  11  * modification, are permitted provided that the following conditions
  12  * are met:
  13  * 1. Redistributions of source code must retain the above copyright
  14  *    notice, this list of conditions and the following disclaimer,
  15  *    without modification, immediately at the beginning of the file.
  16  * 2. Redistributions in binary form must reproduce the above copyright
  17  *    notice, this list of conditions and the following disclaimer in the
  18  *    documentation and/or other materials provided with the distribution.
  19  *
  20  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  21  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  22  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  23  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  24  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  25  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  26  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  27  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  28  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  29  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  30  *
  31  * Some code derived from the sys/dev/mmc and sys/cam/ata
  32  * Thanks to Warner Losh <imp@FreeBSD.org>, Alexander Motin <mav@FreeBSD.org>
  33  * Bernd Walter <tisco@FreeBSD.org>, and other authors.
  34  */
  35
  36 #include <sys/cdefs.h>
  37 __FBSDID("$FreeBSD$");
  38
  39 //#include "opt_sdda.h"
  40
  41 #include <sys/param.h>
  42
  43 #ifdef _KERNEL
  44 #include <sys/systm.h>
  45 #include <sys/kernel.h>
  46 #include <sys/bio.h>
  47 #include <sys/endian.h>
  48 #include <sys/taskqueue.h>
  49 #include <sys/lock.h>
  50 #include <sys/mutex.h>
  51 #include <sys/conf.h>
  52 #include <sys/devicestat.h>
  53 #include <sys/eventhandler.h>
  54 #include <sys/malloc.h>
  55 #include <sys/cons.h>
  56 #include <sys/proc.h>
  57 #include <sys/reboot.h>
  58 #include <geom/geom_disk.h>
  59 #include <machine/_inttypes.h>  /* for PRIu64 */
  60 #endif /* _KERNEL */
  61
  62 #ifndef _KERNEL
  63 #include <stdio.h>
  64 #include <string.h>
  65 #endif /* _KERNEL */
  66
  67 #include <cam/cam.h>
  68 #include <cam/cam_ccb.h>
  69 #include <cam/cam_queue.h>
  70 #include <cam/cam_periph.h>
  71 #include <cam/cam_sim.h>
  72 #include <cam/cam_xpt.h>
  73 #include <cam/cam_xpt_sim.h>
  74 #include <cam/cam_xpt_periph.h>
  75 #include <cam/cam_xpt_internal.h>
  76 #include <cam/cam_debug.h>
  77
  78
  79 #include <cam/mmc/mmc_all.h>
  80
  81 #include <machine/md_var.h>     /* geometry translation */
  82
  83 #ifdef _KERNEL
  84
  85 typedef enum {
  86         SDDA_FLAG_OPEN          = 0x0002,
  87         SDDA_FLAG_DIRTY         = 0x0004
  88 } sdda_flags;
  89
  90 typedef enum {
  91         SDDA_STATE_INIT,
  92         SDDA_STATE_INVALID,
  93         SDDA_STATE_NORMAL,
  94         SDDA_STATE_PART_SWITCH,
  95 } sdda_state;
  96
  97 #define SDDA_FMT_BOOT           "sdda%dboot"
  98 #define SDDA_FMT_GP             "sdda%dgp"
  99 #define SDDA_FMT_RPMB           "sdda%drpmb"
 100 #define SDDA_LABEL_ENH          "enh"
 101
 102 #define SDDA_PART_NAMELEN       (16 + 1)
 103
 104 struct sdda_softc;
 105
 106 struct sdda_part {
 107         struct disk *disk;
 108         struct bio_queue_head bio_queue;
 109         sdda_flags flags;
 110         struct sdda_softc *sc;
 111         u_int cnt;
 112         u_int type;
 113         bool ro;
 114         char name[SDDA_PART_NAMELEN];
 115 };
 116
 117 struct sdda_softc {
 118         int      outstanding_cmds;      /* Number of active commands */
 119         int      refcount;              /* Active xpt_action() calls */
 120         sdda_state state;
 121         struct mmc_data *mmcdata;
 122         struct cam_periph *periph;
 123 //      sdda_quirks quirks;
 124         struct task start_init_task;
 125         uint32_t raw_csd[4];
 126         uint8_t raw_ext_csd[512]; /* MMC only? */
 127         struct mmc_csd csd;
 128         struct mmc_cid cid;
 129         struct mmc_scr scr;
 130         /* Calculated from CSD */
 131         uint64_t sector_count;
 132         uint64_t mediasize;
 133
 134         /* Calculated from CID */
 135         char card_id_string[64];/* Formatted CID info (serial, MFG, etc) */
 136         char card_sn_string[16];/* Formatted serial # for disk->d_ident */
 137         /* Determined from CSD + is highspeed card*/
 138         uint32_t card_f_max;
 139
 140         /* Generic switch timeout */
 141         uint32_t cmd6_time;
 142         /* MMC partitions support */
 143         struct sdda_part *part[MMC_PART_MAX];
 144         uint8_t part_curr;      /* Partition currently switched to */
 145         uint8_t part_requested; /* What partition we're currently switching to */
 146         uint32_t part_time;     /* Partition switch timeout [us] */
 147         off_t enh_base;         /* Enhanced user data area slice base ... */
 148         off_t enh_size;         /* ... and size [bytes] */
 149         int log_count;
 150         struct timeval log_time;
 151 };
 152
 153 #define ccb_bp          ppriv_ptr1
 154
 155 static  disk_strategy_t sddastrategy;
 156 static  periph_init_t   sddainit;
 157 static  void            sddaasync(void *callback_arg, u_int32_t code,
 158                                 struct cam_path *path, void *arg);
 159 static  periph_ctor_t   sddaregister;
 160 static  periph_dtor_t   sddacleanup;
 161 static  periph_start_t  sddastart;
 162 static  periph_oninv_t  sddaoninvalidate;
 163 static  void            sddadone(struct cam_periph *periph,
 164                                union ccb *done_ccb);
 165 static  int             sddaerror(union ccb *ccb, u_int32_t cam_flags,
 166                                 u_int32_t sense_flags);
 167
 168 static uint16_t get_rca(struct cam_periph *periph);
 169 static void sdda_start_init(void *context, union ccb *start_ccb);
 170 static void sdda_start_init_task(void *context, int pending);
 171 static void sdda_process_mmc_partitions(struct cam_periph *periph, union ccb *start_ccb);
 172 static uint32_t sdda_get_host_caps(struct cam_periph *periph, union ccb *ccb);
 173 static void sdda_init_switch_part(struct cam_periph *periph, union ccb *start_ccb, u_int part);
 174 static int mmc_select_card(struct cam_periph *periph, union ccb *ccb, uint32_t rca);
 175 static inline uint32_t mmc_get_sector_size(struct cam_periph *periph) {return MMC_SECTOR_SIZE;}
 176
 177 /* TODO: actually issue GET_TRAN_SETTINGS to get R/O status */
 178 static inline bool sdda_get_read_only(struct cam_periph *periph, union ccb *start_ccb)
 179 {
 180
 181         return (false);
 182 }
 183
 184 static uint32_t mmc_get_spec_vers(struct cam_periph *periph);
 185 static uint64_t mmc_get_media_size(struct cam_periph *periph);
 186 static uint32_t mmc_get_cmd6_timeout(struct cam_periph *periph);
 187 static void sdda_add_part(struct cam_periph *periph, u_int type,
 188     const char *name, u_int cnt, off_t media_size, bool ro);
 189
 190 static struct periph_driver sddadriver =
 191 {
 192         sddainit, "sdda",
 193         TAILQ_HEAD_INITIALIZER(sddadriver.units), /* generation */ 0
 194 };
 195
 196 PERIPHDRIVER_DECLARE(sdda, sddadriver);
 197
 198 static MALLOC_DEFINE(M_SDDA, "sd_da", "sd_da buffers");
 199
 200 static const int exp[8] = {
 201         1, 10, 100, 1000, 10000, 100000, 1000000, 10000000
 202 };
 203
 204 static const int mant[16] = {
 205         0, 10, 12, 13, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 70, 80
 206 };
 207
 208 static const int cur_min[8] = {
 209         500, 1000, 5000, 10000, 25000, 35000, 60000, 100000
 210 };
 211
 212 static const int cur_max[8] = {
 213         1000, 5000, 10000, 25000, 35000, 45000, 800000, 200000
 214 };
 215
 216 static uint16_t
 217 get_rca(struct cam_periph *periph) {
 218         return periph->path->device->mmc_ident_data.card_rca;
 219 }
 220
 221 static uint32_t
 222 mmc_get_bits(uint32_t *bits, int bit_len, int start, int size)
 223 {
 224         const int i = (bit_len / 32) - (start / 32) - 1;
 225         const int shift = start & 31;
 226         uint32_t retval = bits[i] >> shift;
 227         if (size + shift > 32)
 228                 retval |= bits[i - 1] << (32 - shift);
 229         return (retval & ((1llu << size) - 1));
 230 }
 231
 232
 233 static void
 234 mmc_decode_csd_sd(uint32_t *raw_csd, struct mmc_csd *csd)
 235 {
 236         int v;
 237         int m;
 238         int e;
 239
 240         memset(csd, 0, sizeof(*csd));
 241         csd->csd_structure = v = mmc_get_bits(raw_csd, 128, 126, 2);
 242         if (v == 0) {
 243                 m = mmc_get_bits(raw_csd, 128, 115, 4);
 244                 e = mmc_get_bits(raw_csd, 128, 112, 3);
 245                 csd->tacc = (exp[e] * mant[m] + 9) / 10;
 246                 csd->nsac = mmc_get_bits(raw_csd, 128, 104, 8) * 100;
 247                 m = mmc_get_bits(raw_csd, 128, 99, 4);
 248                 e = mmc_get_bits(raw_csd, 128, 96, 3);
 249                 csd->tran_speed = exp[e] * 10000 * mant[m];
 250                 csd->ccc = mmc_get_bits(raw_csd, 128, 84, 12);
 251                 csd->read_bl_len = 1 << mmc_get_bits(raw_csd, 128, 80, 4);
 252                 csd->read_bl_partial = mmc_get_bits(raw_csd, 128, 79, 1);
 253                 csd->write_blk_misalign = mmc_get_bits(raw_csd, 128, 78, 1);
 254                 csd->read_blk_misalign = mmc_get_bits(raw_csd, 128, 77, 1);
 255                 csd->dsr_imp = mmc_get_bits(raw_csd, 128, 76, 1);
 256                 csd->vdd_r_curr_min = cur_min[mmc_get_bits(raw_csd, 128, 59, 3)];
 257                 csd->vdd_r_curr_max = cur_max[mmc_get_bits(raw_csd, 128, 56, 3)];
 258                 csd->vdd_w_curr_min = cur_min[mmc_get_bits(raw_csd, 128, 53, 3)];
 259                 csd->vdd_w_curr_max = cur_max[mmc_get_bits(raw_csd, 128, 50, 3)];
 260                 m = mmc_get_bits(raw_csd, 128, 62, 12);
 261                 e = mmc_get_bits(raw_csd, 128, 47, 3);
 262                 csd->capacity = ((1 + m) << (e + 2)) * csd->read_bl_len;
 263                 csd->erase_blk_en = mmc_get_bits(raw_csd, 128, 46, 1);
 264                 csd->erase_sector = mmc_get_bits(raw_csd, 128, 39, 7) + 1;
 265                 csd->wp_grp_size = mmc_get_bits(raw_csd, 128, 32, 7);
 266                 csd->wp_grp_enable = mmc_get_bits(raw_csd, 128, 31, 1);
 267                 csd->r2w_factor = 1 << mmc_get_bits(raw_csd, 128, 26, 3);
 268                 csd->write_bl_len = 1 << mmc_get_bits(raw_csd, 128, 22, 4);
 269                 csd->write_bl_partial = mmc_get_bits(raw_csd, 128, 21, 1);
 270         } else if (v == 1) {
 271                 m = mmc_get_bits(raw_csd, 128, 115, 4);
 272                 e = mmc_get_bits(raw_csd, 128, 112, 3);
 273                 csd->tacc = (exp[e] * mant[m] + 9) / 10;
 274                 csd->nsac = mmc_get_bits(raw_csd, 128, 104, 8) * 100;
 275                 m = mmc_get_bits(raw_csd, 128, 99, 4);
 276                 e = mmc_get_bits(raw_csd, 128, 96, 3);
 277                 csd->tran_speed = exp[e] * 10000 * mant[m];
 278                 csd->ccc = mmc_get_bits(raw_csd, 128, 84, 12);
 279                 csd->read_bl_len = 1 << mmc_get_bits(raw_csd, 128, 80, 4);
 280                 csd->read_bl_partial = mmc_get_bits(raw_csd, 128, 79, 1);
 281                 csd->write_blk_misalign = mmc_get_bits(raw_csd, 128, 78, 1);
 282                 csd->read_blk_misalign = mmc_get_bits(raw_csd, 128, 77, 1);
 283                 csd->dsr_imp = mmc_get_bits(raw_csd, 128, 76, 1);
 284                 csd->capacity = ((uint64_t)mmc_get_bits(raw_csd, 128, 48, 22) + 1) *
 285                     512 * 1024;
 286                 csd->erase_blk_en = mmc_get_bits(raw_csd, 128, 46, 1);
 287                 csd->erase_sector = mmc_get_bits(raw_csd, 128, 39, 7) + 1;
 288                 csd->wp_grp_size = mmc_get_bits(raw_csd, 128, 32, 7);
 289                 csd->wp_grp_enable = mmc_get_bits(raw_csd, 128, 31, 1);
 290                 csd->r2w_factor = 1 << mmc_get_bits(raw_csd, 128, 26, 3);
 291                 csd->write_bl_len = 1 << mmc_get_bits(raw_csd, 128, 22, 4);
 292                 csd->write_bl_partial = mmc_get_bits(raw_csd, 128, 21, 1);
 293         } else
 294                 panic("unknown SD CSD version");
 295 }
 296
 297 static void
 298 mmc_decode_csd_mmc(uint32_t *raw_csd, struct mmc_csd *csd)
 299 {
 300         int m;
 301         int e;
 302
 303         memset(csd, 0, sizeof(*csd));
 304         csd->csd_structure = mmc_get_bits(raw_csd, 128, 126, 2);
 305         csd->spec_vers = mmc_get_bits(raw_csd, 128, 122, 4);
 306         m = mmc_get_bits(raw_csd, 128, 115, 4);
 307         e = mmc_get_bits(raw_csd, 128, 112, 3);
 308         csd->tacc = exp[e] * mant[m] + 9 / 10;
 309         csd->nsac = mmc_get_bits(raw_csd, 128, 104, 8) * 100;
 310         m = mmc_get_bits(raw_csd, 128, 99, 4);
 311         e = mmc_get_bits(raw_csd, 128, 96, 3);
 312         csd->tran_speed = exp[e] * 10000 * mant[m];
 313         csd->ccc = mmc_get_bits(raw_csd, 128, 84, 12);
 314         csd->read_bl_len = 1 << mmc_get_bits(raw_csd, 128, 80, 4);
 315         csd->read_bl_partial = mmc_get_bits(raw_csd, 128, 79, 1);
 316         csd->write_blk_misalign = mmc_get_bits(raw_csd, 128, 78, 1);
 317         csd->read_blk_misalign = mmc_get_bits(raw_csd, 128, 77, 1);
 318         csd->dsr_imp = mmc_get_bits(raw_csd, 128, 76, 1);
 319         csd->vdd_r_curr_min = cur_min[mmc_get_bits(raw_csd, 128, 59, 3)];
 320         csd->vdd_r_curr_max = cur_max[mmc_get_bits(raw_csd, 128, 56, 3)];
 321         csd->vdd_w_curr_min = cur_min[mmc_get_bits(raw_csd, 128, 53, 3)];
 322         csd->vdd_w_curr_max = cur_max[mmc_get_bits(raw_csd, 128, 50, 3)];
 323         m = mmc_get_bits(raw_csd, 128, 62, 12);
 324         e = mmc_get_bits(raw_csd, 128, 47, 3);
 325         csd->capacity = ((1 + m) << (e + 2)) * csd->read_bl_len;
 326         csd->erase_blk_en = 0;
 327         csd->erase_sector = (mmc_get_bits(raw_csd, 128, 42, 5) + 1) *
 328             (mmc_get_bits(raw_csd, 128, 37, 5) + 1);
 329         csd->wp_grp_size = mmc_get_bits(raw_csd, 128, 32, 5);
 330         csd->wp_grp_enable = mmc_get_bits(raw_csd, 128, 31, 1);
 331         csd->r2w_factor = 1 << mmc_get_bits(raw_csd, 128, 26, 3);
 332         csd->write_bl_len = 1 << mmc_get_bits(raw_csd, 128, 22, 4);
 333         csd->write_bl_partial = mmc_get_bits(raw_csd, 128, 21, 1);
 334 }
 335
 336 static void
 337 mmc_decode_cid_sd(uint32_t *raw_cid, struct mmc_cid *cid)
 338 {
 339         int i;
 340
 341         /* There's no version info, so we take it on faith */
 342         memset(cid, 0, sizeof(*cid));
 343         cid->mid = mmc_get_bits(raw_cid, 128, 120, 8);
 344         cid->oid = mmc_get_bits(raw_cid, 128, 104, 16);
 345         for (i = 0; i < 5; i++)
 346                 cid->pnm[i] = mmc_get_bits(raw_cid, 128, 96 - i * 8, 8);
 347         cid->pnm[5] = 0;
 348         cid->prv = mmc_get_bits(raw_cid, 128, 56, 8);
 349         cid->psn = mmc_get_bits(raw_cid, 128, 24, 32);
 350         cid->mdt_year = mmc_get_bits(raw_cid, 128, 12, 8) + 2000;
 351         cid->mdt_month = mmc_get_bits(raw_cid, 128, 8, 4);
 352 }
 353
 354 static void
 355 mmc_decode_cid_mmc(uint32_t *raw_cid, struct mmc_cid *cid)
 356 {
 357         int i;
 358
 359         /* There's no version info, so we take it on faith */
 360         memset(cid, 0, sizeof(*cid));
 361         cid->mid = mmc_get_bits(raw_cid, 128, 120, 8);
 362         cid->oid = mmc_get_bits(raw_cid, 128, 104, 8);
 363         for (i = 0; i < 6; i++)
 364                 cid->pnm[i] = mmc_get_bits(raw_cid, 128, 96 - i * 8, 8);
 365         cid->pnm[6] = 0;
 366         cid->prv = mmc_get_bits(raw_cid, 128, 48, 8);
 367         cid->psn = mmc_get_bits(raw_cid, 128, 16, 32);
 368         cid->mdt_month = mmc_get_bits(raw_cid, 128, 12, 4);
 369         cid->mdt_year = mmc_get_bits(raw_cid, 128, 8, 4) + 1997;
 370 }
 371
 372 static void
 373 mmc_format_card_id_string(struct sdda_softc *sc, struct mmc_params *mmcp)
 374 {
 375         char oidstr[8];
 376         uint8_t c1;
 377         uint8_t c2;
 378
 379         /*
 380          * Format a card ID string for use by the mmcsd driver, it's what
 381          * appears between the <> in the following:
 382          * mmcsd0: 968MB <SD SD01G 8.0 SN 2686905 Mfg 08/2008 by 3 TN> at mmc0
 383          * 22.5MHz/4bit/128-block
 384          *
 385          * Also format just the card serial number, which the mmcsd driver will
 386          * use as the disk->d_ident string.
 387          *
 388          * The card_id_string in mmc_ivars is currently allocated as 64 bytes,
 389          * and our max formatted length is currently 55 bytes if every field
 390          * contains the largest value.
 391          *
 392          * Sometimes the oid is two printable ascii chars; when it's not,
 393          * format it as 0xnnnn instead.
 394          */
 395         c1 = (sc->cid.oid >> 8) & 0x0ff;
 396         c2 = sc->cid.oid & 0x0ff;
 397         if (c1 > 0x1f && c1 < 0x7f && c2 > 0x1f && c2 < 0x7f)
 398                 snprintf(oidstr, sizeof(oidstr), "%c%c", c1, c2);
 399         else
 400                 snprintf(oidstr, sizeof(oidstr), "0x%04x", sc->cid.oid);
 401         snprintf(sc->card_sn_string, sizeof(sc->card_sn_string),
 402             "%08X", sc->cid.psn);
 403         snprintf(sc->card_id_string, sizeof(sc->card_id_string),
 404                  "%s%s %s %d.%d SN %08X MFG %02d/%04d by %d %s",
 405                  mmcp->card_features & CARD_FEATURE_MMC ? "MMC" : "SD",
 406                  mmcp->card_features & CARD_FEATURE_SDHC ? "HC" : "",
 407                  sc->cid.pnm, sc->cid.prv >> 4, sc->cid.prv & 0x0f,
 408                  sc->cid.psn, sc->cid.mdt_month, sc->cid.mdt_year,
 409                  sc->cid.mid, oidstr);
 410 }
 411
 412 static int
 413 sddaopen(struct disk *dp)
 414 {
 415         struct sdda_part *part;
 416         struct cam_periph *periph;
 417         struct sdda_softc *softc;
 418         int error;
 419
 420         part = (struct sdda_part *)dp->d_drv1;
 421         softc = part->sc;
 422         periph = softc->periph;
 423         if (cam_periph_acquire(periph) != 0) {
 424                 return(ENXIO);
 425         }
 426
 427         cam_periph_lock(periph);
 428         if ((error = cam_periph_hold(periph, PRIBIO|PCATCH)) != 0) {
 429                 cam_periph_unlock(periph);
 430                 cam_periph_release(periph);
 431                 return (error);
 432         }
 433
 434         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sddaopen\n"));
 435
 436         part->flags |= SDDA_FLAG_OPEN;
 437
 438         cam_periph_unhold(periph);
 439         cam_periph_unlock(periph);
 440         return (0);
 441 }
 442
 443 static int
 444 sddaclose(struct disk *dp)
 445 {
 446         struct sdda_part *part;
 447         struct  cam_periph *periph;
 448         struct  sdda_softc *softc;
 449
 450         part = (struct sdda_part *)dp->d_drv1;
 451         softc = part->sc;
 452         periph = softc->periph;
 453         part->flags &= ~SDDA_FLAG_OPEN;
 454
 455         cam_periph_lock(periph);
 456
 457         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sddaclose\n"));
 458
 459         while (softc->refcount != 0)
 460                 cam_periph_sleep(periph, &softc->refcount, PRIBIO, "sddaclose", 1);
 461         cam_periph_unlock(periph);
 462         cam_periph_release(periph);
 463         return (0);
 464 }
 465
 466 static void
 467 sddaschedule(struct cam_periph *periph)
 468 {
 469         struct sdda_softc *softc = (struct sdda_softc *)periph->softc;
 470         struct sdda_part *part;
 471         struct bio *bp;
 472         int i;
 473
 474         /* Check if we have more work to do. */
 475         /* Find partition that has outstanding commands. Prefer current partition. */
 476         bp = bioq_first(&softc->part[softc->part_curr]->bio_queue);
 477         if (bp == NULL) {
 478                 for (i = 0; i < MMC_PART_MAX; i++) {
 479                         if ((part = softc->part[i]) != NULL &&
 480                             (bp = bioq_first(&softc->part[i]->bio_queue)) != NULL)
 481                                 break;
 482                 }
 483         }
 484         if (bp != NULL) {
 485                 xpt_schedule(periph, CAM_PRIORITY_NORMAL);
 486         }
 487 }
 488
 489 /*
 490  * Actually translate the requested transfer into one the physical driver
 491  * can understand.  The transfer is described by a buf and will include
 492  * only one physical transfer.
 493  */
 494 static void
 495 sddastrategy(struct bio *bp)
 496 {
 497         struct cam_periph *periph;
 498         struct sdda_part *part;
 499         struct sdda_softc *softc;
 500
 501         part = (struct sdda_part *)bp->bio_disk->d_drv1;
 502         softc = part->sc;
 503         periph = softc->periph;
 504
 505         cam_periph_lock(periph);
 506
 507         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sddastrategy(%p)\n", bp));
 508
 509         /*
 510          * If the device has been made invalid, error out
 511          */
 512         if ((periph->flags & CAM_PERIPH_INVALID) != 0) {
 513                 cam_periph_unlock(periph);
 514                 biofinish(bp, NULL, ENXIO);
 515                 return;
 516         }
 517
 518         /*
 519          * Place it in the queue of disk activities for this disk
 520          */
 521         bioq_disksort(&part->bio_queue, bp);
 522
 523         /*
 524          * Schedule ourselves for performing the work.
 525          */
 526         sddaschedule(periph);
 527         cam_periph_unlock(periph);
 528
 529         return;
 530 }
 531
 532 static void
 533 sddainit(void)
 534 {
 535         cam_status status;
 536
 537         /*
 538          * Install a global async callback.  This callback will
 539          * receive async callbacks like "new device found".
 540          */
 541         status = xpt_register_async(AC_FOUND_DEVICE, sddaasync, NULL, NULL);
 542
 543         if (status != CAM_REQ_CMP) {
 544                 printf("sdda: Failed to attach master async callback "
 545                        "due to status 0x%x!\n", status);
 546         }
 547 }
 548
 549 /*
 550  * Callback from GEOM, called when it has finished cleaning up its
 551  * resources.
 552  */
 553 static void
 554 sddadiskgonecb(struct disk *dp)
 555 {
 556         struct cam_periph *periph;
 557         struct sdda_part *part;
 558
 559         part = (struct sdda_part *)dp->d_drv1;
 560         periph = part->sc->periph;
 561         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sddadiskgonecb\n"));
 562
 563         cam_periph_release(periph);
 564 }
 565
 566 static void
 567 sddaoninvalidate(struct cam_periph *periph)
 568 {
 569         struct sdda_softc *softc;
 570         struct sdda_part *part;
 571
 572         softc = (struct sdda_softc *)periph->softc;
 573
 574         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sddaoninvalidate\n"));
 575
 576         /*
 577          * De-register any async callbacks.
 578          */
 579         xpt_register_async(0, sddaasync, periph, periph->path);
 580
 581         /*
 582          * Return all queued I/O with ENXIO.
 583          * XXX Handle any transactions queued to the card
 584          *     with XPT_ABORT_CCB.
 585          */
 586         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("bioq_flush start\n"));
 587         for (int i = 0; i < MMC_PART_MAX; i++) {
 588                 if ((part = softc->part[i]) != NULL) {
 589                         bioq_flush(&part->bio_queue, NULL, ENXIO);
 590                         disk_gone(part->disk);
 591                 }
 592         }
 593         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("bioq_flush end\n"));
 594
 595 }
 596
 597 static void
 598 sddacleanup(struct cam_periph *periph)
 599 {
 600         struct sdda_softc *softc;
 601         struct sdda_part *part;
 602         int i;
 603
 604         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sddacleanup\n"));
 605         softc = (struct sdda_softc *)periph->softc;
 606
 607         cam_periph_unlock(periph);
 608
 609         for (i = 0; i < MMC_PART_MAX; i++) {
 610                 if ((part = softc->part[i]) != NULL) {
 611                         disk_destroy(part->disk);
 612                         free(part, M_DEVBUF);
 613                         softc->part[i] = NULL;
 614                 }
 615         }
 616         free(softc, M_DEVBUF);
 617         cam_periph_lock(periph);
 618 }
 619
 620 static void
 621 sddaasync(void *callback_arg, u_int32_t code,
 622         struct cam_path *path, void *arg)
 623 {
 624         struct ccb_getdev cgd;
 625         struct cam_periph *periph;
 626         struct sdda_softc *softc;
 627
 628         periph = (struct cam_periph *)callback_arg;
 629         CAM_DEBUG(path, CAM_DEBUG_TRACE, ("sddaasync(code=%d)\n", code));
 630         switch (code) {
 631         case AC_FOUND_DEVICE:
 632         {
 633                 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("=> AC_FOUND_DEVICE\n"));
 634                 struct ccb_getdev *cgd;
 635                 cam_status status;
 636
 637                 cgd = (struct ccb_getdev *)arg;
 638                 if (cgd == NULL)
 639                         break;
 640
 641                 if (cgd->protocol != PROTO_MMCSD)
 642                         break;
 643
 644                 if (!(path->device->mmc_ident_data.card_features & CARD_FEATURE_MEMORY)) {
 645                         CAM_DEBUG(path, CAM_DEBUG_TRACE, ("No memory on the card!\n"));
 646                         break;
 647                 }
 648
 649                 /*
 650                  * Allocate a peripheral instance for
 651                  * this device and start the probe
 652                  * process.
 653                  */
 654                 status = cam_periph_alloc(sddaregister, sddaoninvalidate,
 655                                           sddacleanup, sddastart,
 656                                           "sdda", CAM_PERIPH_BIO,
 657                                           path, sddaasync,
 658                                           AC_FOUND_DEVICE, cgd);
 659
 660                 if (status != CAM_REQ_CMP
 661                  && status != CAM_REQ_INPROG)
 662                         printf("sddaasync: Unable to attach to new device "
 663                                 "due to status 0x%x\n", status);
 664                 break;
 665         }
 666         case AC_GETDEV_CHANGED:
 667         {
 668                 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("=> AC_GETDEV_CHANGED\n"));
 669                 softc = (struct sdda_softc *)periph->softc;
 670                 xpt_setup_ccb(&cgd.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
 671                 cgd.ccb_h.func_code = XPT_GDEV_TYPE;
 672                 xpt_action((union ccb *)&cgd);
 673                 cam_periph_async(periph, code, path, arg);
 674                 break;
 675         }
 676         case AC_ADVINFO_CHANGED:
 677         {
 678                 uintptr_t buftype;
 679                 int i;
 680
 681                 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("=> AC_ADVINFO_CHANGED\n"));
 682                 buftype = (uintptr_t)arg;
 683                 if (buftype == CDAI_TYPE_PHYS_PATH) {
 684                         struct sdda_softc *softc;
 685                         struct sdda_part *part;
 686
 687                         softc = periph->softc;
 688                         for (i = 0; i < MMC_PART_MAX; i++) {
 689                                 if ((part = softc->part[i]) != NULL) {
 690                                         disk_attr_changed(part->disk, "GEOM::physpath",
 691                                             M_NOWAIT);
 692                                 }
 693                         }
 694                 }
 695                 break;
 696         }
 697         default:
 698                 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("=> default?!\n"));
 699                 cam_periph_async(periph, code, path, arg);
 700                 break;
 701         }
 702 }
 703
 704
 705 static int
 706 sddagetattr(struct bio *bp)
 707 {
 708         struct cam_periph *periph;
 709         struct sdda_softc *softc;
 710         struct sdda_part *part;
 711         int ret;
 712
 713         part = (struct sdda_part *)bp->bio_disk->d_drv1;
 714         softc = part->sc;
 715         periph = softc->periph;
 716         cam_periph_lock(periph);
 717         ret = xpt_getattr(bp->bio_data, bp->bio_length, bp->bio_attribute,
 718             periph->path);
 719         cam_periph_unlock(periph);
 720         if (ret == 0)
 721                 bp->bio_completed = bp->bio_length;
 722         return (ret);
 723 }
 724
 725 static cam_status
 726 sddaregister(struct cam_periph *periph, void *arg)
 727 {
 728         struct sdda_softc *softc;
 729         struct ccb_getdev *cgd;
 730         union ccb *request_ccb; /* CCB representing the probe request */
 731
 732         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sddaregister\n"));
 733         cgd = (struct ccb_getdev *)arg;
 734         if (cgd == NULL) {
 735                 printf("sddaregister: no getdev CCB, can't register device\n");
 736                 return (CAM_REQ_CMP_ERR);
 737         }
 738
 739         softc = (struct sdda_softc *)malloc(sizeof(*softc), M_DEVBUF,
 740             M_NOWAIT|M_ZERO);
 741
 742         if (softc == NULL) {
 743                 printf("sddaregister: Unable to probe new device. "
 744                     "Unable to allocate softc\n");
 745                 return (CAM_REQ_CMP_ERR);
 746         }
 747
 748         softc->state = SDDA_STATE_INIT;
 749         softc->mmcdata =
 750                 (struct mmc_data *)malloc(sizeof(struct mmc_data), M_DEVBUF, M_NOWAIT|M_ZERO);
 751         periph->softc = softc;
 752         softc->periph = periph;
 753
 754         request_ccb = (union ccb*) arg;
 755         xpt_schedule(periph, CAM_PRIORITY_XPT);
 756         TASK_INIT(&softc->start_init_task, 0, sdda_start_init_task, periph);
 757         taskqueue_enqueue(taskqueue_thread, &softc->start_init_task);
 758
 759         return (CAM_REQ_CMP);
 760 }
 761
 762 static int
 763 mmc_exec_app_cmd(struct cam_periph *periph, union ccb *ccb,
 764         struct mmc_command *cmd) {
 765         int err;
 766
 767         /* Send APP_CMD first */
 768         memset(&ccb->mmcio.cmd, 0, sizeof(struct mmc_command));
 769         memset(&ccb->mmcio.stop, 0, sizeof(struct mmc_command));
 770         cam_fill_mmcio(&ccb->mmcio,
 771                        /*retries*/ 0,
 772                        /*cbfcnp*/ NULL,
 773                        /*flags*/ CAM_DIR_NONE,
 774                        /*mmc_opcode*/ MMC_APP_CMD,
 775                        /*mmc_arg*/ get_rca(periph) << 16,
 776                        /*mmc_flags*/ MMC_RSP_R1 | MMC_CMD_AC,
 777                        /*mmc_data*/ NULL,
 778                        /*timeout*/ 0);
 779
 780         err = cam_periph_runccb(ccb, sddaerror, CAM_FLAG_NONE, /*sense_flags*/0, NULL);
 781         if (err != 0)
 782                 return err;
 783         if (!(ccb->mmcio.cmd.resp[0] & R1_APP_CMD))
 784                 return MMC_ERR_FAILED;
 785
 786         /* Now exec actual command */
 787         int flags = 0;
 788         if (cmd->data != NULL) {
 789                 ccb->mmcio.cmd.data = cmd->data;
 790                 if (cmd->data->flags & MMC_DATA_READ)
 791                         flags |= CAM_DIR_IN;
 792                 if (cmd->data->flags & MMC_DATA_WRITE)
 793                         flags |= CAM_DIR_OUT;
 794         } else flags = CAM_DIR_NONE;
 795
 796         cam_fill_mmcio(&ccb->mmcio,
 797                        /*retries*/ 0,
 798                        /*cbfcnp*/ NULL,
 799                        /*flags*/ flags,
 800                        /*mmc_opcode*/ cmd->opcode,
 801                        /*mmc_arg*/ cmd->arg,
 802                        /*mmc_flags*/ cmd->flags,
 803                        /*mmc_data*/ cmd->data,
 804                        /*timeout*/ 0);
 805
 806         err = cam_periph_runccb(ccb, sddaerror, CAM_FLAG_NONE, /*sense_flags*/0, NULL);
 807         memcpy(cmd->resp, ccb->mmcio.cmd.resp, sizeof(cmd->resp));
 808         cmd->error = ccb->mmcio.cmd.error;
 809         if (err != 0)
 810                 return err;
 811         return 0;
 812 }
 813
 814 static int
 815 mmc_app_get_scr(struct cam_periph *periph, union ccb *ccb, uint32_t *rawscr) {
 816         int err;
 817         struct mmc_command cmd;
 818         struct mmc_data d;
 819
 820         memset(&cmd, 0, sizeof(cmd));
 821         memset(&d, 0, sizeof(d));
 822
 823         memset(rawscr, 0, 8);
 824         cmd.opcode = ACMD_SEND_SCR;
 825         cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
 826         cmd.arg = 0;
 827
 828         d.data = rawscr;
 829         d.len = 8;
 830         d.flags = MMC_DATA_READ;
 831         cmd.data = &d;
 832
 833         err = mmc_exec_app_cmd(periph, ccb, &cmd);
 834         rawscr[0] = be32toh(rawscr[0]);
 835         rawscr[1] = be32toh(rawscr[1]);
 836         return (err);
 837 }
 838
 839 static int
 840 mmc_send_ext_csd(struct cam_periph *periph, union ccb *ccb,
 841                  uint8_t *rawextcsd, size_t buf_len) {
 842         int err;
 843         struct mmc_data d;
 844
 845         KASSERT(buf_len == 512, ("Buffer for ext csd must be 512 bytes"));
 846         d.data = rawextcsd;
 847         d.len = buf_len;
 848         d.flags = MMC_DATA_READ;
 849         memset(d.data, 0, d.len);
 850
 851         cam_fill_mmcio(&ccb->mmcio,
 852                        /*retries*/ 0,
 853                        /*cbfcnp*/ NULL,
 854                        /*flags*/ CAM_DIR_IN,
 855                        /*mmc_opcode*/ MMC_SEND_EXT_CSD,
 856                        /*mmc_arg*/ 0,
 857                        /*mmc_flags*/ MMC_RSP_R1 | MMC_CMD_ADTC,
 858                        /*mmc_data*/ &d,
 859                        /*timeout*/ 0);
 860
 861         err = cam_periph_runccb(ccb, sddaerror, CAM_FLAG_NONE, /*sense_flags*/0, NULL);
 862         if (err != 0)
 863                 return (err);
 864         return (MMC_ERR_NONE);
 865 }
 866
 867 static void
 868 mmc_app_decode_scr(uint32_t *raw_scr, struct mmc_scr *scr)
 869 {
 870         unsigned int scr_struct;
 871
 872         memset(scr, 0, sizeof(*scr));
 873
 874         scr_struct = mmc_get_bits(raw_scr, 64, 60, 4);
 875         if (scr_struct != 0) {
 876                 printf("Unrecognised SCR structure version %d\n",
 877                     scr_struct);
 878                 return;
 879         }
 880         scr->sda_vsn = mmc_get_bits(raw_scr, 64, 56, 4);
 881         scr->bus_widths = mmc_get_bits(raw_scr, 64, 48, 4);
 882 }
 883
 884 static inline void
 885 mmc_switch_fill_mmcio(union ccb *ccb,
 886     uint8_t set, uint8_t index, uint8_t value, u_int timeout)
 887 {
 888         int arg = (MMC_SWITCH_FUNC_WR << 24) |
 889             (index << 16) |
 890             (value << 8) |
 891             set;
 892
 893         cam_fill_mmcio(&ccb->mmcio,
 894                        /*retries*/ 0,
 895                        /*cbfcnp*/ NULL,
 896                        /*flags*/ CAM_DIR_NONE,
 897                        /*mmc_opcode*/ MMC_SWITCH_FUNC,
 898                        /*mmc_arg*/ arg,
 899                        /*mmc_flags*/ MMC_RSP_R1B | MMC_CMD_AC,
 900                        /*mmc_data*/ NULL,
 901                        /*timeout*/ timeout);
 902 }
 903
 904 static int
 905 mmc_select_card(struct cam_periph *periph, union ccb *ccb, uint32_t rca)
 906 {
 907         int flags;
 908
 909         flags = (rca ? MMC_RSP_R1B : MMC_RSP_NONE) | MMC_CMD_AC;
 910         cam_fill_mmcio(&ccb->mmcio,
 911                        /*retries*/ 0,
 912                        /*cbfcnp*/ NULL,
 913                        /*flags*/ CAM_DIR_IN,
 914                        /*mmc_opcode*/ MMC_SELECT_CARD,
 915                        /*mmc_arg*/ rca << 16,
 916                        /*mmc_flags*/ flags,
 917                        /*mmc_data*/ NULL,
 918                        /*timeout*/ 0);
 919
 920         cam_periph_runccb(ccb, sddaerror, CAM_FLAG_NONE, /*sense_flags*/0, NULL);
 921
 922         if (((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP)) {
 923                 if (ccb->mmcio.cmd.error != 0) {
 924                         CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_PERIPH,
 925                                   ("%s: MMC_SELECT command failed", __func__));
 926                         return EIO;
 927                 }
 928                 return 0; /* Normal return */
 929         } else {
 930                 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_PERIPH,
 931                           ("%s: CAM request failed\n", __func__));
 932                 return EIO;
 933         }
 934 }
 935
 936 static int
 937 mmc_switch(struct cam_periph *periph, union ccb *ccb,
 938     uint8_t set, uint8_t index, uint8_t value, u_int timeout)
 939 {
 940
 941         mmc_switch_fill_mmcio(ccb, set, index, value, timeout);
 942         cam_periph_runccb(ccb, sddaerror, CAM_FLAG_NONE, /*sense_flags*/0, NULL);
 943
 944         if (((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP)) {
 945                 if (ccb->mmcio.cmd.error != 0) {
 946                         CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_PERIPH,
 947                                   ("%s: MMC command failed", __func__));
 948                         return (EIO);
 949                 }
 950                 return (0); /* Normal return */
 951         } else {
 952                 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_PERIPH,
 953                           ("%s: CAM request failed\n", __func__));
 954                 return (EIO);
 955         }
 956
 957 }
 958
 959 static uint32_t
 960 mmc_get_spec_vers(struct cam_periph *periph) {
 961         struct sdda_softc *softc = (struct sdda_softc *)periph->softc;
 962
 963         return (softc->csd.spec_vers);
 964 }
 965
 966 static uint64_t
 967 mmc_get_media_size(struct cam_periph *periph) {
 968         struct sdda_softc *softc = (struct sdda_softc *)periph->softc;
 969
 970         return (softc->mediasize);
 971 }
 972
 973 static uint32_t
 974 mmc_get_cmd6_timeout(struct cam_periph *periph)
 975 {
 976         struct sdda_softc *softc = (struct sdda_softc *)periph->softc;
 977
 978         if (mmc_get_spec_vers(periph) >= 6)
 979                 return (softc->raw_ext_csd[EXT_CSD_GEN_CMD6_TIME] * 10);
 980         return (500 * 1000);
 981 }
 982
 983 static int
 984 mmc_sd_switch(struct cam_periph *periph, union ccb *ccb,
 985               uint8_t mode, uint8_t grp, uint8_t value,
 986               uint8_t *res) {
 987
 988         struct mmc_data mmc_d;
 989         uint32_t arg;
 990
 991         memset(res, 0, 64);
 992         mmc_d.len = 64;
 993         mmc_d.data = res;
 994         mmc_d.flags = MMC_DATA_READ;
 995
 996         arg = mode << 31;                       /* 0 - check, 1 - set */
 997         arg |= 0x00FFFFFF;
 998         arg &= ~(0xF << (grp * 4));
 999         arg |= value << (grp * 4);
1000
1001         cam_fill_mmcio(&ccb->mmcio,
1002                        /*retries*/ 0,
1003                        /*cbfcnp*/ NULL,
1004                        /*flags*/ CAM_DIR_IN,
1005                        /*mmc_opcode*/ SD_SWITCH_FUNC,
1006                        /*mmc_arg*/ arg,
1007                        /*mmc_flags*/ MMC_RSP_R1 | MMC_CMD_ADTC,
1008                        /*mmc_data*/ &mmc_d,
1009                        /*timeout*/ 0);
1010
1011         cam_periph_runccb(ccb, sddaerror, CAM_FLAG_NONE, /*sense_flags*/0, NULL);
1012
1013         if (((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP)) {
1014                 if (ccb->mmcio.cmd.error != 0) {
1015                         CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_PERIPH,
1016                                   ("%s: MMC command failed", __func__));
1017                         return EIO;
1018                 }
1019                 return 0; /* Normal return */
1020         } else {
1021                 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_PERIPH,
1022                           ("%s: CAM request failed\n", __func__));
1023                 return EIO;
1024         }
1025 }
1026
1027 static int
1028 mmc_set_timing(struct cam_periph *periph,
1029                union ccb *ccb,
1030                enum mmc_bus_timing timing)
1031 {
1032         u_char switch_res[64];
1033         int err;
1034         uint8_t value;
1035         struct sdda_softc *softc = (struct sdda_softc *)periph->softc;
1036         struct mmc_params *mmcp = &periph->path->device->mmc_ident_data;
1037
1038         CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE,
1039                   ("mmc_set_timing(timing=%d)", timing));
1040         switch (timing) {
1041         case bus_timing_normal:
1042                 value = 0;
1043                 break;
1044         case bus_timing_hs:
1045                 value = 1;
1046                 break;
1047         default:
1048                 return (MMC_ERR_INVALID);
1049         }
1050         if (mmcp->card_features & CARD_FEATURE_MMC) {
1051                 err = mmc_switch(periph, ccb, EXT_CSD_CMD_SET_NORMAL,
1052                     EXT_CSD_HS_TIMING, value, softc->cmd6_time);
1053         } else {
1054                 err = mmc_sd_switch(periph, ccb, SD_SWITCH_MODE_SET, SD_SWITCH_GROUP1, value, switch_res);
1055         }
1056
1057         /* Set high-speed timing on the host */
1058         struct ccb_trans_settings_mmc *cts;
1059         cts = &ccb->cts.proto_specific.mmc;
1060         ccb->ccb_h.func_code = XPT_SET_TRAN_SETTINGS;
1061         ccb->ccb_h.flags = CAM_DIR_NONE;
1062         ccb->ccb_h.retry_count = 0;
1063         ccb->ccb_h.timeout = 100;
1064         ccb->ccb_h.cbfcnp = NULL;
1065         cts->ios.timing = timing;
1066         cts->ios_valid = MMC_BT;
1067         xpt_action(ccb);
1068
1069         return (err);
1070 }
1071
1072 static void
1073 sdda_start_init_task(void *context, int pending) {
1074         union ccb *new_ccb;
1075         struct cam_periph *periph;
1076
1077         periph = (struct cam_periph *)context;
1078         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sdda_start_init_task\n"));
1079         new_ccb = xpt_alloc_ccb();
1080         xpt_setup_ccb(&new_ccb->ccb_h, periph->path,
1081                       CAM_PRIORITY_NONE);
1082
1083         cam_periph_lock(periph);
1084         sdda_start_init(context, new_ccb);
1085         cam_periph_unlock(periph);
1086         xpt_free_ccb(new_ccb);
1087 }
1088
1089 static void
1090 sdda_set_bus_width(struct cam_periph *periph, union ccb *ccb, int width) {
1091         struct sdda_softc *softc = (struct sdda_softc *)periph->softc;
1092         struct mmc_params *mmcp = &periph->path->device->mmc_ident_data;
1093         int err;
1094
1095         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sdda_set_bus_width\n"));
1096
1097         /* First set for the card, then for the host */
1098         if (mmcp->card_features & CARD_FEATURE_MMC) {
1099                 uint8_t value;
1100                 switch (width) {
1101                 case bus_width_1:
1102                         value = EXT_CSD_BUS_WIDTH_1;
1103                         break;
1104                 case bus_width_4:
1105                         value = EXT_CSD_BUS_WIDTH_4;
1106                         break;
1107                 case bus_width_8:
1108                         value = EXT_CSD_BUS_WIDTH_8;
1109                         break;
1110                 default:
1111                         panic("Invalid bus width %d", width);
1112                 }
1113                 err = mmc_switch(periph, ccb, EXT_CSD_CMD_SET_NORMAL,
1114                     EXT_CSD_BUS_WIDTH, value, softc->cmd6_time);
1115         } else {
1116                 /* For SD cards we send ACMD6 with the required bus width in arg */
1117                 struct mmc_command cmd;
1118                 memset(&cmd, 0, sizeof(struct mmc_command));
1119                 cmd.opcode = ACMD_SET_BUS_WIDTH;
1120                 cmd.arg = width;
1121                 cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
1122                 err = mmc_exec_app_cmd(periph, ccb, &cmd);
1123         }
1124
1125         if (err != MMC_ERR_NONE) {
1126                 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, ("Error %d when setting bus width on the card\n", err));
1127                 return;
1128         }
1129         /* Now card is done, set the host to the same width */
1130         struct ccb_trans_settings_mmc *cts;
1131         cts = &ccb->cts.proto_specific.mmc;
1132         ccb->ccb_h.func_code = XPT_SET_TRAN_SETTINGS;
1133         ccb->ccb_h.flags = CAM_DIR_NONE;
1134         ccb->ccb_h.retry_count = 0;
1135         ccb->ccb_h.timeout = 100;
1136         ccb->ccb_h.cbfcnp = NULL;
1137         cts->ios.bus_width = width;
1138         cts->ios_valid = MMC_BW;
1139         xpt_action(ccb);
1140 }
1141
1142 static inline const char
1143 *part_type(u_int type)
1144 {
1145
1146         switch (type) {
1147         case EXT_CSD_PART_CONFIG_ACC_RPMB:
1148                 return ("RPMB");
1149         case EXT_CSD_PART_CONFIG_ACC_DEFAULT:
1150                 return ("default");
1151         case EXT_CSD_PART_CONFIG_ACC_BOOT0:
1152                 return ("boot0");
1153         case EXT_CSD_PART_CONFIG_ACC_BOOT1:
1154                 return ("boot1");
1155         case EXT_CSD_PART_CONFIG_ACC_GP0:
1156         case EXT_CSD_PART_CONFIG_ACC_GP1:
1157         case EXT_CSD_PART_CONFIG_ACC_GP2:
1158         case EXT_CSD_PART_CONFIG_ACC_GP3:
1159                 return ("general purpose");
1160         default:
1161                 return ("(unknown type)");
1162         }
1163 }
1164
1165 static inline const char
1166 *bus_width_str(enum mmc_bus_width w)
1167 {
1168
1169         switch (w) {
1170         case bus_width_1:
1171                 return ("1-bit");
1172         case bus_width_4:
1173                 return ("4-bit");
1174         case bus_width_8:
1175                 return ("8-bit");
1176         }
1177 }
1178
1179 static uint32_t
1180 sdda_get_host_caps(struct cam_periph *periph, union ccb *ccb)
1181 {
1182         struct ccb_trans_settings_mmc *cts;
1183
1184         cts = &ccb->cts.proto_specific.mmc;
1185
1186         ccb->ccb_h.func_code = XPT_GET_TRAN_SETTINGS;
1187         ccb->ccb_h.flags = CAM_DIR_NONE;
1188         ccb->ccb_h.retry_count = 0;
1189         ccb->ccb_h.timeout = 100;
1190         ccb->ccb_h.cbfcnp = NULL;
1191         xpt_action(ccb);
1192
1193         if (ccb->ccb_h.status != CAM_REQ_CMP)
1194                 panic("Cannot get host caps");
1195         return (cts->host_caps);
1196 }
1197
1198 static void
1199 sdda_start_init(void *context, union ccb *start_ccb)
1200 {
1201         struct cam_periph *periph = (struct cam_periph *)context;
1202         struct ccb_trans_settings_mmc *cts;
1203         uint32_t host_caps;
1204         uint32_t sec_count;
1205         int err;
1206         int host_f_max;
1207
1208         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sdda_start_init\n"));
1209         /* periph was held for us when this task was enqueued */
1210         if ((periph->flags & CAM_PERIPH_INVALID) != 0) {
1211                 cam_periph_release(periph);
1212                 return;
1213         }
1214
1215         struct sdda_softc *softc = (struct sdda_softc *)periph->softc;
1216         //struct ccb_mmcio *mmcio = &start_ccb->mmcio;
1217         struct mmc_params *mmcp = &periph->path->device->mmc_ident_data;
1218         struct cam_ed *device = periph->path->device;
1219
1220         if (mmcp->card_features & CARD_FEATURE_MMC) {
1221                 mmc_decode_csd_mmc(mmcp->card_csd, &softc->csd);
1222                 mmc_decode_cid_mmc(mmcp->card_cid, &softc->cid);
1223                 if (mmc_get_spec_vers(periph) >= 4) {
1224                         err = mmc_send_ext_csd(periph, start_ccb,
1225                                                (uint8_t *)&softc->raw_ext_csd,
1226                                                sizeof(softc->raw_ext_csd));
1227                         if (err != 0) {
1228                                 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH,
1229                                     ("Cannot read EXT_CSD, err %d", err));
1230                                 return;
1231                         }
1232                 }
1233         } else {
1234                 mmc_decode_csd_sd(mmcp->card_csd, &softc->csd);
1235                 mmc_decode_cid_sd(mmcp->card_cid, &softc->cid);
1236         }
1237
1238         softc->sector_count = softc->csd.capacity / 512;
1239         softc->mediasize = softc->csd.capacity;
1240         softc->cmd6_time = mmc_get_cmd6_timeout(periph);
1241
1242         /* MMC >= 4.x have EXT_CSD that has its own opinion about capacity */
1243         if (mmc_get_spec_vers(periph) >= 4) {
1244                 sec_count = softc->raw_ext_csd[EXT_CSD_SEC_CNT] +
1245                     (softc->raw_ext_csd[EXT_CSD_SEC_CNT + 1] << 8) +
1246                     (softc->raw_ext_csd[EXT_CSD_SEC_CNT + 2] << 16) +
1247                     (softc->raw_ext_csd[EXT_CSD_SEC_CNT + 3] << 24);
1248                 if (sec_count != 0) {
1249                         softc->sector_count = sec_count;
1250                         softc->mediasize = softc->sector_count * 512;
1251                         /* FIXME: there should be a better name for this option...*/
1252                         mmcp->card_features |= CARD_FEATURE_SDHC;
1253                 }
1254
1255         }
1256         CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH,
1257             ("Capacity: %"PRIu64", sectors: %"PRIu64"\n",
1258                 softc->mediasize,
1259                 softc->sector_count));
1260         mmc_format_card_id_string(softc, mmcp);
1261
1262         /* Update info for CAM */
1263         device->serial_num_len = strlen(softc->card_sn_string);
1264         device->serial_num = (u_int8_t *)malloc((device->serial_num_len + 1),
1265             M_CAMXPT, M_NOWAIT);
1266         strlcpy(device->serial_num, softc->card_sn_string, device->serial_num_len);
1267
1268         device->device_id_len = strlen(softc->card_id_string);
1269         device->device_id = (u_int8_t *)malloc((device->device_id_len + 1),
1270             M_CAMXPT, M_NOWAIT);
1271         strlcpy(device->device_id, softc->card_id_string, device->device_id_len);
1272
1273         strlcpy(mmcp->model, softc->card_id_string, sizeof(mmcp->model));
1274
1275         /* Set the clock frequency that the card can handle */
1276         cts = &start_ccb->cts.proto_specific.mmc;
1277
1278         /* First, get the host's max freq */
1279         start_ccb->ccb_h.func_code = XPT_GET_TRAN_SETTINGS;
1280         start_ccb->ccb_h.flags = CAM_DIR_NONE;
1281         start_ccb->ccb_h.retry_count = 0;
1282         start_ccb->ccb_h.timeout = 100;
1283         start_ccb->ccb_h.cbfcnp = NULL;
1284         xpt_action(start_ccb);
1285
1286         if (start_ccb->ccb_h.status != CAM_REQ_CMP)
1287                 panic("Cannot get max host freq");
1288         host_f_max = cts->host_f_max;
1289         host_caps = cts->host_caps;
1290         if (cts->ios.bus_width != bus_width_1)
1291                 panic("Bus width in ios is not 1-bit");
1292
1293         /* Now check if the card supports High-speed */
1294         softc->card_f_max = softc->csd.tran_speed;
1295
1296         if (host_caps & MMC_CAP_HSPEED) {
1297                 /* Find out if the card supports High speed timing */
1298                 if (mmcp->card_features & CARD_FEATURE_SD20) {
1299                         /* Get and decode SCR */
1300                         uint32_t rawscr[2];
1301                         uint8_t res[64];
1302                         if (mmc_app_get_scr(periph, start_ccb, rawscr)) {
1303                                 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, ("Cannot get SCR\n"));
1304                                 goto finish_hs_tests;
1305                         }
1306                         mmc_app_decode_scr(rawscr, &softc->scr);
1307
1308                         if ((softc->scr.sda_vsn >= 1) && (softc->csd.ccc & (1<<10))) {
1309                                 mmc_sd_switch(periph, start_ccb, SD_SWITCH_MODE_CHECK,
1310                                               SD_SWITCH_GROUP1, SD_SWITCH_NOCHANGE, res);
1311                                 if (res[13] & 2) {
1312                                         CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, ("Card supports HS\n"));
1313                                         softc->card_f_max = SD_HS_MAX;
1314                                 }
1315
1316                                 /*
1317                                  * We deselect then reselect the card here.  Some cards
1318                                  * become unselected and timeout with the above two
1319                                  * commands, although the state tables / diagrams in the
1320                                  * standard suggest they go back to the transfer state.
1321                                  * Other cards don't become deselected, and if we
1322                                  * attempt to blindly re-select them, we get timeout
1323                                  * errors from some controllers.  So we deselect then
1324                                  * reselect to handle all situations.
1325                                  */
1326                                 mmc_select_card(periph, start_ccb, 0);
1327                                 mmc_select_card(periph, start_ccb, get_rca(periph));
1328                         } else {
1329                                 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, ("Not trying the switch\n"));
1330                                 goto finish_hs_tests;
1331                         }
1332                 }
1333
1334                 if (mmcp->card_features & CARD_FEATURE_MMC && mmc_get_spec_vers(periph) >= 4) {
1335                         if (softc->raw_ext_csd[EXT_CSD_CARD_TYPE]
1336                             & EXT_CSD_CARD_TYPE_HS_52)
1337                                 softc->card_f_max = MMC_TYPE_HS_52_MAX;
1338                         else if (softc->raw_ext_csd[EXT_CSD_CARD_TYPE]
1339                                  & EXT_CSD_CARD_TYPE_HS_26)
1340                                 softc->card_f_max = MMC_TYPE_HS_26_MAX;
1341                 }
1342         }
1343         int f_max;
1344 finish_hs_tests:
1345         f_max = min(host_f_max, softc->card_f_max);
1346         CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH, ("Set SD freq to %d MHz (min out of host f=%d MHz and card f=%d MHz)\n", f_max  / 1000000, host_f_max / 1000000, softc->card_f_max / 1000000));
1347
1348         /* Enable high-speed timing on the card */
1349         if (f_max > 25000000) {
1350                 err = mmc_set_timing(periph, start_ccb, bus_timing_hs);
1351                 if (err != MMC_ERR_NONE) {
1352                         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("Cannot switch card to high-speed mode"));
1353                         f_max = 25000000;
1354                 }
1355         }
1356         /* Set frequency on the controller */
1357         start_ccb->ccb_h.func_code = XPT_SET_TRAN_SETTINGS;
1358         start_ccb->ccb_h.flags = CAM_DIR_NONE;
1359         start_ccb->ccb_h.retry_count = 0;
1360         start_ccb->ccb_h.timeout = 100;
1361         start_ccb->ccb_h.cbfcnp = NULL;
1362         cts->ios.clock = f_max;
1363         cts->ios_valid = MMC_CLK;
1364         xpt_action(start_ccb);
1365
1366         /* Set bus width */
1367         enum mmc_bus_width desired_bus_width = bus_width_1;
1368         enum mmc_bus_width max_host_bus_width =
1369                 (host_caps & MMC_CAP_8_BIT_DATA ? bus_width_8 :
1370                  host_caps & MMC_CAP_4_BIT_DATA ? bus_width_4 : bus_width_1);
1371         enum mmc_bus_width max_card_bus_width = bus_width_1;
1372         if (mmcp->card_features & CARD_FEATURE_SD20 &&
1373             softc->scr.bus_widths & SD_SCR_BUS_WIDTH_4)
1374                 max_card_bus_width = bus_width_4;
1375         /*
1376          * Unlike SD, MMC cards don't have any information about supported bus width...
1377          * So we need to perform read/write test to find out the width.
1378          */
1379         /* TODO: figure out bus width for MMC; use 8-bit for now (to test on BBB) */
1380         if (mmcp->card_features & CARD_FEATURE_MMC)
1381                 max_card_bus_width = bus_width_8;
1382
1383         desired_bus_width = min(max_host_bus_width, max_card_bus_width);
1384         CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH,
1385                   ("Set bus width to %s (min of host %s and card %s)\n",
1386                    bus_width_str(desired_bus_width),
1387                    bus_width_str(max_host_bus_width),
1388                    bus_width_str(max_card_bus_width)));
1389         sdda_set_bus_width(periph, start_ccb, desired_bus_width);
1390
1391         softc->state = SDDA_STATE_NORMAL;
1392
1393         /* MMC partitions support */
1394         if (mmcp->card_features & CARD_FEATURE_MMC && mmc_get_spec_vers(periph) >= 4) {
1395                 sdda_process_mmc_partitions(periph, start_ccb);
1396         } else if (mmcp->card_features & CARD_FEATURE_SD20) {
1397                 /* For SD[HC] cards, just add one partition that is the whole card */
1398                 sdda_add_part(periph, 0, "sdda",
1399                     periph->unit_number,
1400                     mmc_get_media_size(periph),
1401                     sdda_get_read_only(periph, start_ccb));
1402                 softc->part_curr = 0;
1403         }
1404
1405         xpt_announce_periph(periph, softc->card_id_string);
1406         /*
1407          * Add async callbacks for bus reset and bus device reset calls.
1408          * I don't bother checking if this fails as, in most cases,
1409          * the system will function just fine without them and the only
1410          * alternative would be to not attach the device on failure.
1411          */
1412         xpt_register_async(AC_LOST_DEVICE | AC_GETDEV_CHANGED |
1413             AC_ADVINFO_CHANGED, sddaasync, periph, periph->path);
1414 }
1415
1416 static void
1417 sdda_add_part(struct cam_periph *periph, u_int type, const char *name,
1418     u_int cnt, off_t media_size, bool ro)
1419 {
1420         struct sdda_softc *sc = (struct sdda_softc *)periph->softc;
1421         struct sdda_part *part;
1422         struct ccb_pathinq cpi;
1423         u_int maxio;
1424
1425         CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH,
1426             ("Partition type '%s', size %ju %s\n",
1427             part_type(type),
1428             media_size,
1429             ro ? "(read-only)" : ""));
1430
1431         part = sc->part[type] = malloc(sizeof(*part), M_DEVBUF,
1432             M_WAITOK | M_ZERO);
1433
1434         part->cnt = cnt;
1435         part->type = type;
1436         part->ro = ro;
1437         part->sc = sc;
1438         snprintf(part->name, sizeof(part->name), name, periph->unit_number);
1439
1440         /*
1441          * Due to the nature of RPMB partition it doesn't make much sense
1442          * to add it as a disk. It would be more appropriate to create a
1443          * userland tool to operate on the partition or leverage the existing
1444          * tools from sysutils/mmc-utils.
1445          */
1446         if (type == EXT_CSD_PART_CONFIG_ACC_RPMB) {
1447                 /* TODO: Create device, assign IOCTL handler */
1448                 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH,
1449                     ("Don't know what to do with RPMB partitions yet\n"));
1450                 return;
1451         }
1452
1453         bioq_init(&part->bio_queue);
1454
1455         bzero(&cpi, sizeof(cpi));
1456         xpt_setup_ccb(&cpi.ccb_h, periph->path, CAM_PRIORITY_NONE);
1457         cpi.ccb_h.func_code = XPT_PATH_INQ;
1458         xpt_action((union ccb *)&cpi);
1459
1460         /*
1461          * Register this media as a disk
1462          */
1463         (void)cam_periph_hold(periph, PRIBIO);
1464         cam_periph_unlock(periph);
1465
1466         part->disk = disk_alloc();
1467         part->disk->d_rotation_rate = DISK_RR_NON_ROTATING;
1468         part->disk->d_devstat = devstat_new_entry(part->name,
1469             cnt, 512,
1470             DEVSTAT_ALL_SUPPORTED,
1471             DEVSTAT_TYPE_DIRECT | XPORT_DEVSTAT_TYPE(cpi.transport),
1472             DEVSTAT_PRIORITY_DISK);
1473
1474         part->disk->d_open = sddaopen;
1475         part->disk->d_close = sddaclose;
1476         part->disk->d_strategy = sddastrategy;
1477         part->disk->d_getattr = sddagetattr;
1478 //      sc->disk->d_dump = sddadump;
1479         part->disk->d_gone = sddadiskgonecb;
1480         part->disk->d_name = part->name;
1481         part->disk->d_drv1 = part;
1482         maxio = cpi.maxio;              /* Honor max I/O size of SIM */
1483         if (maxio == 0)
1484                 maxio = DFLTPHYS;       /* traditional default */
1485         else if (maxio > MAXPHYS)
1486                 maxio = MAXPHYS;        /* for safety */
1487         part->disk->d_maxsize = maxio;
1488         part->disk->d_unit = cnt;
1489         part->disk->d_flags = 0;
1490         strlcpy(part->disk->d_descr, sc->card_id_string,
1491             MIN(sizeof(part->disk->d_descr), sizeof(sc->card_id_string)));
1492         strlcpy(part->disk->d_ident, sc->card_sn_string,
1493             MIN(sizeof(part->disk->d_ident), sizeof(sc->card_sn_string)));
1494         part->disk->d_hba_vendor = cpi.hba_vendor;
1495         part->disk->d_hba_device = cpi.hba_device;
1496         part->disk->d_hba_subvendor = cpi.hba_subvendor;
1497         part->disk->d_hba_subdevice = cpi.hba_subdevice;
1498
1499         part->disk->d_sectorsize = mmc_get_sector_size(periph);
1500         part->disk->d_mediasize = media_size;
1501         part->disk->d_stripesize = 0;
1502         part->disk->d_fwsectors = 0;
1503         part->disk->d_fwheads = 0;
1504
1505         /*
1506          * Acquire a reference to the periph before we register with GEOM.
1507          * We'll release this reference once GEOM calls us back (via
1508          * sddadiskgonecb()) telling us that our provider has been freed.
1509          */
1510         if (cam_periph_acquire(periph) != 0) {
1511                 xpt_print(periph->path, "%s: lost periph during "
1512                     "registration!\n", __func__);
1513                 cam_periph_lock(periph);
1514                 return;
1515         }
1516         disk_create(part->disk, DISK_VERSION);
1517         cam_periph_lock(periph);
1518         cam_periph_unhold(periph);
1519 }
1520
1521 /*
1522  * For MMC cards, process EXT_CSD and add partitions that are supported by
1523  * this device.
1524  */
1525 static void
1526 sdda_process_mmc_partitions(struct cam_periph *periph, union ccb *ccb)
1527 {
1528         struct sdda_softc *sc = (struct sdda_softc *)periph->softc;
1529         struct mmc_params *mmcp = &periph->path->device->mmc_ident_data;
1530         off_t erase_size, sector_size, size, wp_size;
1531         int i;
1532         const uint8_t *ext_csd;
1533         uint8_t rev;
1534         bool comp, ro;
1535
1536         ext_csd = sc->raw_ext_csd;
1537
1538         /*
1539          * Enhanced user data area and general purpose partitions are only
1540          * supported in revision 1.4 (EXT_CSD_REV == 4) and later, the RPMB
1541          * partition in revision 1.5 (MMC v4.41, EXT_CSD_REV == 5) and later.
1542          */
1543         rev = ext_csd[EXT_CSD_REV];
1544
1545         /*
1546          * Ignore user-creatable enhanced user data area and general purpose
1547          * partitions partitions as long as partitioning hasn't been finished.
1548          */
1549         comp = (ext_csd[EXT_CSD_PART_SET] & EXT_CSD_PART_SET_COMPLETED) != 0;
1550
1551         /*
1552          * Add enhanced user data area slice, unless it spans the entirety of
1553          * the user data area.  The enhanced area is of a multiple of high
1554          * capacity write protect groups ((ERASE_GRP_SIZE + HC_WP_GRP_SIZE) *
1555          * 512 KB) and its offset given in either sectors or bytes, depending
1556          * on whether it's a high capacity device or not.
1557          * NB: The slicer and its slices need to be registered before adding
1558          *     the disk for the corresponding user data area as re-tasting is
1559          *     racy.
1560          */
1561         sector_size = mmc_get_sector_size(periph);
1562         size = ext_csd[EXT_CSD_ENH_SIZE_MULT] +
1563                 (ext_csd[EXT_CSD_ENH_SIZE_MULT + 1] << 8) +
1564                 (ext_csd[EXT_CSD_ENH_SIZE_MULT + 2] << 16);
1565         if (rev >= 4 && comp == TRUE && size > 0 &&
1566             (ext_csd[EXT_CSD_PART_SUPPORT] &
1567                 EXT_CSD_PART_SUPPORT_ENH_ATTR_EN) != 0 &&
1568             (ext_csd[EXT_CSD_PART_ATTR] & (EXT_CSD_PART_ATTR_ENH_USR)) != 0) {
1569                 erase_size = ext_csd[EXT_CSD_ERASE_GRP_SIZE] * 1024 *
1570                         MMC_SECTOR_SIZE;
1571                 wp_size = ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
1572                 size *= erase_size * wp_size;
1573                 if (size != mmc_get_media_size(periph) * sector_size) {
1574                         sc->enh_size = size;
1575                         sc->enh_base = (ext_csd[EXT_CSD_ENH_START_ADDR] +
1576                             (ext_csd[EXT_CSD_ENH_START_ADDR + 1] << 8) +
1577                             (ext_csd[EXT_CSD_ENH_START_ADDR + 2] << 16) +
1578                             (ext_csd[EXT_CSD_ENH_START_ADDR + 3] << 24)) *
1579                                 ((mmcp->card_features & CARD_FEATURE_SDHC) ? 1: MMC_SECTOR_SIZE);
1580                 } else
1581                         CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH,
1582                             ("enhanced user data area spans entire device"));
1583         }
1584
1585         /*
1586          * Add default partition.  This may be the only one or the user
1587          * data area in case partitions are supported.
1588          */
1589         ro = sdda_get_read_only(periph, ccb);
1590         sdda_add_part(periph, EXT_CSD_PART_CONFIG_ACC_DEFAULT, "sdda",
1591             periph->unit_number, mmc_get_media_size(periph), ro);
1592         sc->part_curr = EXT_CSD_PART_CONFIG_ACC_DEFAULT;
1593
1594         if (mmc_get_spec_vers(periph) < 3)
1595                 return;
1596
1597         /* Belatedly announce enhanced user data slice. */
1598         if (sc->enh_size != 0) {
1599                 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH,
1600                     ("enhanced user data area off 0x%jx size %ju bytes\n",
1601                         sc->enh_base, sc->enh_size));
1602         }
1603
1604         /*
1605          * Determine partition switch timeout (provided in units of 10 ms)
1606          * and ensure it's at least 300 ms as some eMMC chips lie.
1607          */
1608         sc->part_time = max(ext_csd[EXT_CSD_PART_SWITCH_TO] * 10 * 1000,
1609             300 * 1000);
1610
1611         /* Add boot partitions, which are of a fixed multiple of 128 KB. */
1612         size = ext_csd[EXT_CSD_BOOT_SIZE_MULT] * MMC_BOOT_RPMB_BLOCK_SIZE;
1613         if (size > 0 && (sdda_get_host_caps(periph, ccb) & MMC_CAP_BOOT_NOACC) == 0) {
1614                 sdda_add_part(periph, EXT_CSD_PART_CONFIG_ACC_BOOT0,
1615                     SDDA_FMT_BOOT, 0, size,
1616                     ro | ((ext_csd[EXT_CSD_BOOT_WP_STATUS] &
1617                     EXT_CSD_BOOT_WP_STATUS_BOOT0_MASK) != 0));
1618                 sdda_add_part(periph, EXT_CSD_PART_CONFIG_ACC_BOOT1,
1619                     SDDA_FMT_BOOT, 1, size,
1620                     ro | ((ext_csd[EXT_CSD_BOOT_WP_STATUS] &
1621                     EXT_CSD_BOOT_WP_STATUS_BOOT1_MASK) != 0));
1622         }
1623
1624         /* Add RPMB partition, which also is of a fixed multiple of 128 KB. */
1625         size = ext_csd[EXT_CSD_RPMB_MULT] * MMC_BOOT_RPMB_BLOCK_SIZE;
1626         if (rev >= 5 && size > 0)
1627                 sdda_add_part(periph, EXT_CSD_PART_CONFIG_ACC_RPMB,
1628                     SDDA_FMT_RPMB, 0, size, ro);
1629
1630         if (rev <= 3 || comp == FALSE)
1631                 return;
1632
1633         /*
1634          * Add general purpose partitions, which are of a multiple of high
1635          * capacity write protect groups, too.
1636          */
1637         if ((ext_csd[EXT_CSD_PART_SUPPORT] & EXT_CSD_PART_SUPPORT_EN) != 0) {
1638                 erase_size = ext_csd[EXT_CSD_ERASE_GRP_SIZE] * 1024 *
1639                         MMC_SECTOR_SIZE;
1640                 wp_size = ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
1641                 for (i = 0; i < MMC_PART_GP_MAX; i++) {
1642                         size = ext_csd[EXT_CSD_GP_SIZE_MULT + i * 3] +
1643                                 (ext_csd[EXT_CSD_GP_SIZE_MULT + i * 3 + 1] << 8) +
1644                                 (ext_csd[EXT_CSD_GP_SIZE_MULT + i * 3 + 2] << 16);
1645                         if (size == 0)
1646                                 continue;
1647                         sdda_add_part(periph, EXT_CSD_PART_CONFIG_ACC_GP0 + i,
1648                             SDDA_FMT_GP, i, size * erase_size * wp_size, ro);
1649                 }
1650         }
1651 }
1652
1653 /*
1654  * We cannot just call mmc_switch() since it will sleep, and we are in
1655  * GEOM context and cannot sleep. Instead, create an MMCIO request to switch
1656  * partitions and send it to h/w, and upon completion resume processing
1657  * the I/O queue.
1658  * This function cannot fail, instead check switch errors in sddadone().
1659  */
1660 static void
1661 sdda_init_switch_part(struct cam_periph *periph, union ccb *start_ccb, u_int part) {
1662         struct sdda_softc *sc = (struct sdda_softc *)periph->softc;
1663         uint8_t value;
1664
1665         sc->part_requested = part;
1666
1667         value = (sc->raw_ext_csd[EXT_CSD_PART_CONFIG] &
1668             ~EXT_CSD_PART_CONFIG_ACC_MASK) | part;
1669
1670         mmc_switch_fill_mmcio(start_ccb, EXT_CSD_CMD_SET_NORMAL,
1671             EXT_CSD_PART_CONFIG, value, sc->part_time);
1672         start_ccb->ccb_h.cbfcnp = sddadone;
1673
1674         sc->outstanding_cmds++;
1675         cam_periph_unlock(periph);
1676         xpt_action(start_ccb);
1677         cam_periph_lock(periph);
1678 }
1679
1680 /* Called with periph lock held! */
1681 static void
1682 sddastart(struct cam_periph *periph, union ccb *start_ccb)
1683 {
1684         struct bio *bp;
1685         struct sdda_softc *softc = (struct sdda_softc *)periph->softc;
1686         struct sdda_part *part;
1687         struct mmc_params *mmcp = &periph->path->device->mmc_ident_data;
1688         int part_index;
1689
1690         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sddastart\n"));
1691
1692         if (softc->state != SDDA_STATE_NORMAL) {
1693                 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("device is not in SDDA_STATE_NORMAL yet\n"));
1694                 xpt_release_ccb(start_ccb);
1695                 return;
1696         }
1697
1698         /* Find partition that has outstanding commands.  Prefer current partition. */
1699         part = softc->part[softc->part_curr];
1700         bp = bioq_first(&part->bio_queue);
1701         if (bp == NULL) {
1702                 for (part_index = 0; part_index < MMC_PART_MAX; part_index++) {
1703                         if ((part = softc->part[part_index]) != NULL &&
1704                             (bp = bioq_first(&softc->part[part_index]->bio_queue)) != NULL)
1705                                 break;
1706                 }
1707         }
1708         if (bp == NULL) {
1709                 xpt_release_ccb(start_ccb);
1710                 return;
1711         }
1712         if (part_index != softc->part_curr) {
1713                 CAM_DEBUG(periph->path, CAM_DEBUG_PERIPH,
1714                     ("Partition  %d -> %d\n", softc->part_curr, part_index));
1715                 /*
1716                  * According to section "6.2.2 Command restrictions" of the eMMC
1717                  * specification v5.1, CMD19/CMD21 aren't allowed to be used with
1718                  * RPMB partitions.  So we pause re-tuning along with triggering
1719                  * it up-front to decrease the likelihood of re-tuning becoming
1720                  * necessary while accessing an RPMB partition.  Consequently, an
1721                  * RPMB partition should immediately be switched away from again
1722                  * after an access in order to allow for re-tuning to take place
1723                  * anew.
1724                  */
1725                 /* TODO: pause retune if switching to RPMB partition */
1726                 softc->state = SDDA_STATE_PART_SWITCH;
1727                 sdda_init_switch_part(periph, start_ccb, part_index);
1728                 return;
1729         }
1730
1731         bioq_remove(&part->bio_queue, bp);
1732
1733         switch (bp->bio_cmd) {
1734         case BIO_WRITE:
1735                 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("BIO_WRITE\n"));
1736                 part->flags |= SDDA_FLAG_DIRTY;
1737                 /* FALLTHROUGH */
1738         case BIO_READ:
1739         {
1740                 struct ccb_mmcio *mmcio;
1741                 uint64_t blockno = bp->bio_pblkno;
1742                 uint16_t count = bp->bio_bcount / 512;
1743                 uint16_t opcode;
1744
1745                 if (bp->bio_cmd == BIO_READ)
1746                         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("BIO_READ\n"));
1747                 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE,
1748                     ("Block %"PRIu64" cnt %u\n", blockno, count));
1749
1750                 /* Construct new MMC command */
1751                 if (bp->bio_cmd == BIO_READ) {
1752                         if (count > 1)
1753                                 opcode = MMC_READ_MULTIPLE_BLOCK;
1754                         else
1755                                 opcode = MMC_READ_SINGLE_BLOCK;
1756                 } else {
1757                         if (count > 1)
1758                                 opcode = MMC_WRITE_MULTIPLE_BLOCK;
1759                         else
1760                                 opcode = MMC_WRITE_BLOCK;
1761                 }
1762
1763                 start_ccb->ccb_h.func_code = XPT_MMC_IO;
1764                 start_ccb->ccb_h.flags = (bp->bio_cmd == BIO_READ ? CAM_DIR_IN : CAM_DIR_OUT);
1765                 start_ccb->ccb_h.retry_count = 0;
1766                 start_ccb->ccb_h.timeout = 15 * 1000;
1767                 start_ccb->ccb_h.cbfcnp = sddadone;
1768
1769                 mmcio = &start_ccb->mmcio;
1770                 mmcio->cmd.opcode = opcode;
1771                 mmcio->cmd.arg = blockno;
1772                 if (!(mmcp->card_features & CARD_FEATURE_SDHC))
1773                         mmcio->cmd.arg <<= 9;
1774
1775                 mmcio->cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
1776                 mmcio->cmd.data = softc->mmcdata;
1777                 mmcio->cmd.data->data = bp->bio_data;
1778                 mmcio->cmd.data->len = 512 * count;
1779                 mmcio->cmd.data->flags = (bp->bio_cmd == BIO_READ ? MMC_DATA_READ : MMC_DATA_WRITE);
1780                 /* Direct h/w to issue CMD12 upon completion */
1781                 if (count > 1) {
1782                         mmcio->cmd.data->flags |= MMC_DATA_MULTI;
1783                         mmcio->stop.opcode = MMC_STOP_TRANSMISSION;
1784                         mmcio->stop.flags = MMC_RSP_R1B | MMC_CMD_AC;
1785                         mmcio->stop.arg = 0;
1786                 }
1787
1788                 break;
1789         }
1790         case BIO_FLUSH:
1791                 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("BIO_FLUSH\n"));
1792                 sddaschedule(periph);
1793                 break;
1794         case BIO_DELETE:
1795                 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("BIO_DELETE\n"));
1796                 sddaschedule(periph);
1797                 break;
1798         }
1799         start_ccb->ccb_h.ccb_bp = bp;
1800         softc->outstanding_cmds++;
1801         softc->refcount++;
1802         cam_periph_unlock(periph);
1803         xpt_action(start_ccb);
1804         cam_periph_lock(periph);
1805
1806         /* May have more work to do, so ensure we stay scheduled */
1807         sddaschedule(periph);
1808 }
1809
1810 static void
1811 sddadone(struct cam_periph *periph, union ccb *done_ccb)
1812 {
1813         struct bio *bp;
1814         struct sdda_softc *softc;
1815         struct ccb_mmcio *mmcio;
1816         struct cam_path *path;
1817         uint32_t card_status;
1818         int error = 0;
1819
1820         softc = (struct sdda_softc *)periph->softc;
1821         mmcio = &done_ccb->mmcio;
1822         path = done_ccb->ccb_h.path;
1823
1824         CAM_DEBUG(path, CAM_DEBUG_TRACE, ("sddadone\n"));
1825 //        cam_periph_lock(periph);
1826         if ((done_ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
1827                 CAM_DEBUG(path, CAM_DEBUG_TRACE, ("Error!!!\n"));
1828                 if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0)
1829                         cam_release_devq(path,
1830                             /*relsim_flags*/0,
1831                             /*reduction*/0,
1832                             /*timeout*/0,
1833                             /*getcount_only*/0);
1834                 error = 5; /* EIO */
1835         } else {
1836                 if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0)
1837                         panic("REQ_CMP with QFRZN");
1838                 error = 0;
1839         }
1840
1841         card_status = mmcio->cmd.resp[0];
1842         CAM_DEBUG(path, CAM_DEBUG_TRACE,
1843             ("Card status: %08x\n", R1_STATUS(card_status)));
1844         CAM_DEBUG(path, CAM_DEBUG_TRACE,
1845             ("Current state: %d\n", R1_CURRENT_STATE(card_status)));
1846
1847         /* Process result of switching MMC partitions */
1848         if (softc->state == SDDA_STATE_PART_SWITCH) {
1849                 CAM_DEBUG(path, CAM_DEBUG_TRACE,
1850                     ("Compteting partition switch to %d\n", softc->part_requested));
1851                 softc->outstanding_cmds--;
1852                 /* Complete partition switch */
1853                 softc->state = SDDA_STATE_NORMAL;
1854                 if (error != MMC_ERR_NONE) {
1855                         /* TODO: Unpause retune if accessing RPMB */
1856                         xpt_release_ccb(done_ccb);
1857                         xpt_schedule(periph, CAM_PRIORITY_NORMAL);
1858                         return;
1859                 }
1860
1861                 softc->raw_ext_csd[EXT_CSD_PART_CONFIG] =
1862                     (softc->raw_ext_csd[EXT_CSD_PART_CONFIG] &
1863                         ~EXT_CSD_PART_CONFIG_ACC_MASK) | softc->part_requested;
1864                 /* TODO: Unpause retune if accessing RPMB */
1865                 softc->part_curr = softc->part_requested;
1866                 xpt_release_ccb(done_ccb);
1867
1868                 /* Return to processing BIO requests */
1869                 xpt_schedule(periph, CAM_PRIORITY_NORMAL);
1870                 return;
1871         }
1872
1873         bp = (struct bio *)done_ccb->ccb_h.ccb_bp;
1874         bp->bio_error = error;
1875         if (error != 0) {
1876                 bp->bio_resid = bp->bio_bcount;
1877                 bp->bio_flags |= BIO_ERROR;
1878         } else {
1879                 /* XXX: How many bytes remaining? */
1880                 bp->bio_resid = 0;
1881                 if (bp->bio_resid > 0)
1882                         bp->bio_flags |= BIO_ERROR;
1883         }
1884
1885         softc->outstanding_cmds--;
1886         xpt_release_ccb(done_ccb);
1887         /*
1888          * Release the periph refcount taken in sddastart() for each CCB.
1889          */
1890         KASSERT(softc->refcount >= 1, ("sddadone softc %p refcount %d", softc, softc->refcount));
1891         softc->refcount--;
1892         biodone(bp);
1893 }
1894
1895 static int
1896 sddaerror(union ccb *ccb, u_int32_t cam_flags, u_int32_t sense_flags)
1897 {
1898         return(cam_periph_error(ccb, cam_flags, sense_flags));
1899 }
1900 #endif /* _KERNEL */