2 * Implementation of SCSI Sequential Access Peripheral driver for CAM.
4 * Copyright (c) 1999, 2000 Matthew Jacob
5 * Copyright (c) 2013, 2014, 2015 Spectra Logic Corporation
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions, and the following disclaimer,
13 * without modification, immediately at the beginning of the file.
14 * 2. The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
21 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30 #include <sys/cdefs.h>
31 __FBSDID("$FreeBSD$");
33 #include <sys/param.h>
34 #include <sys/queue.h>
36 #include <sys/systm.h>
37 #include <sys/kernel.h>
39 #include <sys/types.h>
42 #include <sys/limits.h>
43 #include <sys/malloc.h>
48 #include <sys/sysctl.h>
49 #include <sys/taskqueue.h>
51 #include <sys/fcntl.h>
52 #include <sys/devicestat.h>
60 #include <cam/cam_ccb.h>
61 #include <cam/cam_periph.h>
62 #include <cam/cam_xpt_periph.h>
63 #include <cam/cam_debug.h>
65 #include <cam/scsi/scsi_all.h>
66 #include <cam/scsi/scsi_message.h>
67 #include <cam/scsi/scsi_sa.h>
74 #define SA_IO_TIMEOUT 32
76 #ifndef SA_SPACE_TIMEOUT
77 #define SA_SPACE_TIMEOUT 1 * 60
79 #ifndef SA_REWIND_TIMEOUT
80 #define SA_REWIND_TIMEOUT 2 * 60
82 #ifndef SA_ERASE_TIMEOUT
83 #define SA_ERASE_TIMEOUT 4 * 60
85 #ifndef SA_REP_DENSITY_TIMEOUT
86 #define SA_REP_DENSITY_TIMEOUT 90
89 #define SCSIOP_TIMEOUT (60 * 1000) /* not an option */
91 #define IO_TIMEOUT (SA_IO_TIMEOUT * 60 * 1000)
92 #define REWIND_TIMEOUT (SA_REWIND_TIMEOUT * 60 * 1000)
93 #define ERASE_TIMEOUT (SA_ERASE_TIMEOUT * 60 * 1000)
94 #define SPACE_TIMEOUT (SA_SPACE_TIMEOUT * 60 * 1000)
95 #define REP_DENSITY_TIMEOUT (SA_REP_DENSITY_TIMEOUT * 60 * 1000)
98 * Additional options that can be set for config: SA_1FM_AT_EOT
101 #ifndef UNUSED_PARAMETER
102 #define UNUSED_PARAMETER(x) x = x
106 if (((ccb)->ccb_h.status & CAM_DEV_QFRZN) != 0) \
107 cam_release_devq((ccb)->ccb_h.path, 0, 0, 0, FALSE)
113 static MALLOC_DEFINE(M_SCSISA, "SCSI sa", "SCSI sequential access buffers");
116 SA_STATE_NORMAL, SA_STATE_ABNORMAL
119 #define ccb_pflags ppriv_field0
120 #define ccb_bp ppriv_ptr1
122 /* bits in ccb_pflags */
123 #define SA_POSITION_UPDATED 0x1
127 SA_FLAG_OPEN = 0x0001,
128 SA_FLAG_FIXED = 0x0002,
129 SA_FLAG_TAPE_LOCKED = 0x0004,
130 SA_FLAG_TAPE_MOUNTED = 0x0008,
131 SA_FLAG_TAPE_WP = 0x0010,
132 SA_FLAG_TAPE_WRITTEN = 0x0020,
133 SA_FLAG_EOM_PENDING = 0x0040,
134 SA_FLAG_EIO_PENDING = 0x0080,
135 SA_FLAG_EOF_PENDING = 0x0100,
136 SA_FLAG_ERR_PENDING = (SA_FLAG_EOM_PENDING|SA_FLAG_EIO_PENDING|
137 SA_FLAG_EOF_PENDING),
138 SA_FLAG_INVALID = 0x0200,
139 SA_FLAG_COMP_ENABLED = 0x0400,
140 SA_FLAG_COMP_SUPP = 0x0800,
141 SA_FLAG_COMP_UNSUPP = 0x1000,
142 SA_FLAG_TAPE_FROZEN = 0x2000,
143 SA_FLAG_PROTECT_SUPP = 0x4000,
145 SA_FLAG_COMPRESSION = (SA_FLAG_COMP_SUPP|SA_FLAG_COMP_ENABLED|
146 SA_FLAG_COMP_UNSUPP),
147 SA_FLAG_SCTX_INIT = 0x8000
151 SA_MODE_REWIND = 0x00,
152 SA_MODE_NOREWIND = 0x01,
153 SA_MODE_OFFLINE = 0x02
157 SA_PARAM_NONE = 0x000,
158 SA_PARAM_BLOCKSIZE = 0x001,
159 SA_PARAM_DENSITY = 0x002,
160 SA_PARAM_COMPRESSION = 0x004,
161 SA_PARAM_BUFF_MODE = 0x008,
162 SA_PARAM_NUMBLOCKS = 0x010,
164 SA_PARAM_SPEED = 0x040,
165 SA_PARAM_DENSITY_EXT = 0x080,
166 SA_PARAM_LBP = 0x100,
171 SA_QUIRK_NONE = 0x000,
172 SA_QUIRK_NOCOMP = 0x001, /* Can't deal with compression at all*/
173 SA_QUIRK_FIXED = 0x002, /* Force fixed mode */
174 SA_QUIRK_VARIABLE = 0x004, /* Force variable mode */
175 SA_QUIRK_2FM = 0x008, /* Needs Two File Marks at EOD */
176 SA_QUIRK_1FM = 0x010, /* No more than 1 File Mark at EOD */
177 SA_QUIRK_NODREAD = 0x020, /* Don't try and dummy read density */
178 SA_QUIRK_NO_MODESEL = 0x040, /* Don't do mode select at all */
179 SA_QUIRK_NO_CPAGE = 0x080, /* Don't use DEVICE COMPRESSION page */
180 SA_QUIRK_NO_LONG_POS = 0x100 /* No long position information */
183 #define SA_QUIRK_BIT_STRING \
195 #define SAMODE(z) (dev2unit(z) & 0x3)
196 #define SA_IS_CTRL(z) (dev2unit(z) & (1 << 4))
198 #define SA_NOT_CTLDEV 0
202 #define SA_ATYPE_NR 1
203 #define SA_ATYPE_ER 2
204 #define SA_NUM_ATYPES 3
206 #define SAMINOR(ctl, access) \
207 ((ctl << 4) | (access & 0x3))
210 struct cdev *ctl_dev;
216 #define SASBADDBASE(sb, indent, data, xfmt, name, type, xsize, desc) \
217 sbuf_printf(sb, "%*s<%s type=\"%s\" size=\"%zd\" " \
218 "fmt=\"%s\" desc=\"%s\">" #xfmt "</%s>\n", indent, "", \
219 #name, #type, xsize, #xfmt, desc ? desc : "", data, #name);
221 #define SASBADDINT(sb, indent, data, fmt, name) \
222 SASBADDBASE(sb, indent, data, fmt, name, int, sizeof(data), \
225 #define SASBADDINTDESC(sb, indent, data, fmt, name, desc) \
226 SASBADDBASE(sb, indent, data, fmt, name, int, sizeof(data), \
229 #define SASBADDUINT(sb, indent, data, fmt, name) \
230 SASBADDBASE(sb, indent, data, fmt, name, uint, sizeof(data), \
233 #define SASBADDUINTDESC(sb, indent, data, fmt, name, desc) \
234 SASBADDBASE(sb, indent, data, fmt, name, uint, sizeof(data), \
237 #define SASBADDFIXEDSTR(sb, indent, data, fmt, name) \
238 SASBADDBASE(sb, indent, data, fmt, name, str, sizeof(data), \
241 #define SASBADDFIXEDSTRDESC(sb, indent, data, fmt, name, desc) \
242 SASBADDBASE(sb, indent, data, fmt, name, str, sizeof(data), \
245 #define SASBADDVARSTR(sb, indent, data, fmt, name, maxlen) \
246 SASBADDBASE(sb, indent, data, fmt, name, str, maxlen, NULL)
248 #define SASBADDVARSTRDESC(sb, indent, data, fmt, name, maxlen, desc) \
249 SASBADDBASE(sb, indent, data, fmt, name, str, maxlen, desc)
251 #define SASBADDNODE(sb, indent, name) { \
252 sbuf_printf(sb, "%*s<%s type=\"%s\">\n", indent, "", #name, \
257 #define SASBADDNODENUM(sb, indent, name, num) { \
258 sbuf_printf(sb, "%*s<%s type=\"%s\" num=\"%d\">\n", indent, "", \
259 #name, "node", num); \
263 #define SASBENDNODE(sb, indent, name) { \
265 sbuf_printf(sb, "%*s</%s>\n", indent, "", #name); \
268 #define SA_DENSITY_TYPES 4
270 struct sa_prot_state {
272 uint32_t prot_method;
279 struct sa_prot_info {
280 struct sa_prot_state cur_prot_state;
281 struct sa_prot_state pending_prot_state;
285 * A table mapping protection parameters to their types and values.
289 mt_param_set_type param_type;
294 } sa_prot_table[] = {
295 { "prot_method", MT_PARAM_SET_UNSIGNED,
296 __offsetof(struct sa_prot_state, prot_method),
297 /*min_val*/ 0, /*max_val*/ 255, NULL },
298 { "pi_length", MT_PARAM_SET_UNSIGNED,
299 __offsetof(struct sa_prot_state, pi_length),
300 /*min_val*/ 0, /*max_val*/ SA_CTRL_DP_PI_LENGTH_MASK, NULL },
301 { "lbp_w", MT_PARAM_SET_UNSIGNED,
302 __offsetof(struct sa_prot_state, lbp_w),
303 /*min_val*/ 0, /*max_val*/ 1, NULL },
304 { "lbp_r", MT_PARAM_SET_UNSIGNED,
305 __offsetof(struct sa_prot_state, lbp_r),
306 /*min_val*/ 0, /*max_val*/ 1, NULL },
307 { "rbdp", MT_PARAM_SET_UNSIGNED,
308 __offsetof(struct sa_prot_state, rbdp),
309 /*min_val*/ 0, /*max_val*/ 1, NULL }
312 #define SA_NUM_PROT_ENTS sizeof(sa_prot_table)/sizeof(sa_prot_table[0])
314 #define SA_PROT_ENABLED(softc) ((softc->flags & SA_FLAG_PROTECT_SUPP) \
315 && (softc->prot_info.cur_prot_state.initialized != 0) \
316 && (softc->prot_info.cur_prot_state.prot_method != 0))
318 #define SA_PROT_LEN(softc) softc->prot_info.cur_prot_state.pi_length
325 struct cam_periph *periph;
326 struct bio_queue_head bio_queue;
328 struct devstat *device_stats;
331 int num_devs_to_destroy;
340 u_int32_t comp_algorithm;
341 u_int32_t saved_comp_algorithm;
342 u_int32_t media_blksize;
343 u_int32_t last_media_blksize;
344 u_int32_t media_numblks;
345 u_int8_t media_density;
348 u_int8_t dsreg; /* mtio mt_dsreg, redux */
352 int last_resid_was_io;
353 uint8_t density_type_bits[SA_DENSITY_TYPES];
354 int density_info_valid[SA_DENSITY_TYPES];
355 uint8_t density_info[SA_DENSITY_TYPES][SRDS_MAX_LENGTH];
357 struct sa_prot_info prot_info;
363 * Current position information. -1 means that the given value is
364 * unknown. fileno and blkno are always calculated. blkno is
365 * relative to the previous file mark. rep_fileno and rep_blkno
366 * are as reported by the drive, if it supports the long form
367 * report for the READ POSITION command. rep_blkno is relative to
368 * the beginning of the partition.
370 * bop means that the drive is at the beginning of the partition.
371 * eop means that the drive is between early warning and end of
372 * partition, inside the current partition.
373 * bpew means that the position is in a PEWZ (Programmable Early
376 daddr_t partition; /* Absolute from BOT */
377 daddr_t fileno; /* Relative to beginning of partition */
378 daddr_t blkno; /* Relative to last file mark */
379 daddr_t rep_blkno; /* Relative to beginning of partition */
380 daddr_t rep_fileno; /* Relative to beginning of partition */
381 int bop; /* Beginning of Partition */
382 int eop; /* End of Partition */
383 int bpew; /* Beyond Programmable Early Warning */
389 struct scsi_sense_data _last_io_sense;
390 u_int64_t _last_io_resid;
391 u_int8_t _last_io_cdb[CAM_MAX_CDBLEN];
392 struct scsi_sense_data _last_ctl_sense;
393 u_int64_t _last_ctl_resid;
394 u_int8_t _last_ctl_cdb[CAM_MAX_CDBLEN];
395 #define last_io_sense errinfo._last_io_sense
396 #define last_io_resid errinfo._last_io_resid
397 #define last_io_cdb errinfo._last_io_cdb
398 #define last_ctl_sense errinfo._last_ctl_sense
399 #define last_ctl_resid errinfo._last_ctl_resid
400 #define last_ctl_cdb errinfo._last_ctl_cdb
403 * Misc other flags/state
407 open_rdonly : 1, /* open read-only */
408 open_pending_mount : 1, /* open pending mount */
409 ctrl_mode : 1; /* control device open */
411 struct task sysctl_task;
412 struct sysctl_ctx_list sysctl_ctx;
413 struct sysctl_oid *sysctl_tree;
416 struct sa_quirk_entry {
417 struct scsi_inquiry_pattern inq_pat; /* matching pattern */
418 sa_quirks quirks; /* specific quirk type */
419 u_int32_t prefblk; /* preferred blocksize when in fixed mode */
422 static struct sa_quirk_entry sa_quirk_table[] =
425 { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "OnStream",
426 "ADR*", "*"}, SA_QUIRK_FIXED|SA_QUIRK_NODREAD |
427 SA_QUIRK_1FM|SA_QUIRK_NO_MODESEL, 32768
430 { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "ARCHIVE",
431 "Python 06408*", "*"}, SA_QUIRK_NODREAD, 0
434 { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "ARCHIVE",
435 "Python 25601*", "*"}, SA_QUIRK_NOCOMP|SA_QUIRK_NODREAD, 0
438 { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "ARCHIVE",
439 "Python*", "*"}, SA_QUIRK_NODREAD, 0
442 { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "ARCHIVE",
443 "VIPER 150*", "*"}, SA_QUIRK_FIXED|SA_QUIRK_1FM, 512
446 { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "ARCHIVE",
447 "VIPER 2525 25462", "-011"},
448 SA_QUIRK_NOCOMP|SA_QUIRK_1FM|SA_QUIRK_NODREAD, 0
451 { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "ARCHIVE",
452 "VIPER 2525*", "*"}, SA_QUIRK_FIXED|SA_QUIRK_1FM, 1024
456 { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "HP",
457 "C15*", "*"}, SA_QUIRK_VARIABLE|SA_QUIRK_NO_CPAGE, 0,
461 { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "HP",
462 "C56*", "*"}, SA_QUIRK_VARIABLE|SA_QUIRK_2FM, 0
465 { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "HP",
466 "T20*", "*"}, SA_QUIRK_FIXED|SA_QUIRK_1FM, 512
469 { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "HP",
470 "T4000*", "*"}, SA_QUIRK_FIXED|SA_QUIRK_1FM, 512
473 { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "HP",
474 "HP-88780*", "*"}, SA_QUIRK_VARIABLE|SA_QUIRK_2FM, 0
477 { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "KENNEDY",
478 "*", "*"}, SA_QUIRK_VARIABLE|SA_QUIRK_2FM, 0
481 { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "M4 DATA",
482 "123107 SCSI*", "*"}, SA_QUIRK_VARIABLE|SA_QUIRK_2FM, 0
484 { /* jreynold@primenet.com */
485 { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "Seagate",
486 "STT8000N*", "*"}, SA_QUIRK_1FM, 0
488 { /* mike@sentex.net */
489 { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "Seagate",
490 "STT20000*", "*"}, SA_QUIRK_1FM, 0
493 { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "SEAGATE",
494 "DAT 06241-XXX", "*"}, SA_QUIRK_VARIABLE|SA_QUIRK_2FM, 0
497 { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "TANDBERG",
498 " TDC 3600", "U07:"}, SA_QUIRK_NOCOMP|SA_QUIRK_1FM, 512
501 { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "TANDBERG",
502 " TDC 3800", "*"}, SA_QUIRK_NOCOMP|SA_QUIRK_1FM, 512
505 { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "TANDBERG",
506 " TDC 4100", "*"}, SA_QUIRK_NOCOMP|SA_QUIRK_1FM, 512
509 { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "TANDBERG",
510 " TDC 4200", "*"}, SA_QUIRK_NOCOMP|SA_QUIRK_1FM, 512
513 { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "TANDBERG",
514 " SLR*", "*"}, SA_QUIRK_1FM, 0
517 { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "WANGTEK",
518 "5525ES*", "*"}, SA_QUIRK_FIXED|SA_QUIRK_1FM, 512
521 { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "WANGTEK",
522 "51000*", "*"}, SA_QUIRK_FIXED|SA_QUIRK_1FM, 1024
526 static d_open_t saopen;
527 static d_close_t saclose;
528 static d_strategy_t sastrategy;
529 static d_ioctl_t saioctl;
530 static periph_init_t sainit;
531 static periph_ctor_t saregister;
532 static periph_oninv_t saoninvalidate;
533 static periph_dtor_t sacleanup;
534 static periph_start_t sastart;
535 static void saasync(void *callback_arg, u_int32_t code,
536 struct cam_path *path, void *arg);
537 static void sadone(struct cam_periph *periph,
538 union ccb *start_ccb);
539 static int saerror(union ccb *ccb, u_int32_t cam_flags,
540 u_int32_t sense_flags);
541 static int samarkswanted(struct cam_periph *);
542 static int sacheckeod(struct cam_periph *periph);
543 static int sagetparams(struct cam_periph *periph,
544 sa_params params_to_get,
545 u_int32_t *blocksize, u_int8_t *density,
546 u_int32_t *numblocks, int *buff_mode,
547 u_int8_t *write_protect, u_int8_t *speed,
548 int *comp_supported, int *comp_enabled,
549 u_int32_t *comp_algorithm,
550 sa_comp_t *comp_page,
551 struct scsi_control_data_prot_subpage
552 *prot_page, int dp_size,
553 int prot_changeable);
554 static int sasetprot(struct cam_periph *periph,
555 struct sa_prot_state *new_prot);
556 static int sasetparams(struct cam_periph *periph,
557 sa_params params_to_set,
558 u_int32_t blocksize, u_int8_t density,
559 u_int32_t comp_algorithm,
560 u_int32_t sense_flags);
561 static int sasetsili(struct cam_periph *periph,
562 struct mtparamset *ps, int num_params);
563 static int saseteotwarn(struct cam_periph *periph,
564 struct mtparamset *ps, int num_params);
565 static void safillprot(struct sa_softc *softc, int *indent,
567 static void sapopulateprots(struct sa_prot_state *cur_state,
568 struct sa_prot_map *new_table,
570 static struct sa_prot_map *safindprotent(char *name, struct sa_prot_map *table,
572 static int sasetprotents(struct cam_periph *periph,
573 struct mtparamset *ps, int num_params);
574 static struct sa_param_ent *safindparament(struct mtparamset *ps);
575 static int saparamsetlist(struct cam_periph *periph,
576 struct mtsetlist *list, int need_copy);
577 static int saextget(struct cdev *dev, struct cam_periph *periph,
578 struct sbuf *sb, struct mtextget *g);
579 static int saparamget(struct sa_softc *softc, struct sbuf *sb);
580 static void saprevent(struct cam_periph *periph, int action);
581 static int sarewind(struct cam_periph *periph);
582 static int saspace(struct cam_periph *periph, int count,
583 scsi_space_code code);
584 static void sadevgonecb(void *arg);
585 static void sasetupdev(struct sa_softc *softc, struct cdev *dev);
586 static int samount(struct cam_periph *, int, struct cdev *);
587 static int saretension(struct cam_periph *periph);
588 static int sareservereleaseunit(struct cam_periph *periph,
590 static int saloadunload(struct cam_periph *periph, int load);
591 static int saerase(struct cam_periph *periph, int longerase);
592 static int sawritefilemarks(struct cam_periph *periph,
593 int nmarks, int setmarks, int immed);
594 static int sagetpos(struct cam_periph *periph);
595 static int sardpos(struct cam_periph *periph, int, u_int32_t *);
596 static int sasetpos(struct cam_periph *periph, int,
598 static void safilldenstypesb(struct sbuf *sb, int *indent,
599 uint8_t *buf, int buf_len,
601 static void safilldensitysb(struct sa_softc *softc, int *indent,
605 #ifndef SA_DEFAULT_IO_SPLIT
606 #define SA_DEFAULT_IO_SPLIT 0
609 static int sa_allow_io_split = SA_DEFAULT_IO_SPLIT;
612 * Tunable to allow the user to set a global allow_io_split value. Note
613 * that this WILL GO AWAY in FreeBSD 11.0. Silently splitting the I/O up
614 * is bad behavior, because it hides the true tape block size from the
617 static SYSCTL_NODE(_kern_cam, OID_AUTO, sa, CTLFLAG_RD, 0,
618 "CAM Sequential Access Tape Driver");
619 SYSCTL_INT(_kern_cam_sa, OID_AUTO, allow_io_split, CTLFLAG_RDTUN,
620 &sa_allow_io_split, 0, "Default I/O split value");
622 static struct periph_driver sadriver =
625 TAILQ_HEAD_INITIALIZER(sadriver.units), /* generation */ 0
628 PERIPHDRIVER_DECLARE(sa, sadriver);
630 /* For 2.2-stable support */
636 static struct cdevsw sa_cdevsw = {
637 .d_version = D_VERSION,
641 .d_write = physwrite,
643 .d_strategy = sastrategy,
645 .d_flags = D_TAPE | D_TRACKCLOSE,
649 saopen(struct cdev *dev, int flags, int fmt, struct thread *td)
651 struct cam_periph *periph;
652 struct sa_softc *softc;
655 periph = (struct cam_periph *)dev->si_drv1;
656 if (cam_periph_acquire(periph) != CAM_REQ_CMP) {
660 cam_periph_lock(periph);
662 softc = (struct sa_softc *)periph->softc;
664 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE|CAM_DEBUG_INFO,
665 ("saopen(%s): softc=0x%x\n", devtoname(dev), softc->flags));
667 if (SA_IS_CTRL(dev)) {
668 softc->ctrl_mode = 1;
670 cam_periph_unlock(periph);
674 if ((error = cam_periph_hold(periph, PRIBIO|PCATCH)) != 0) {
675 cam_periph_unlock(periph);
676 cam_periph_release(periph);
680 if (softc->flags & SA_FLAG_OPEN) {
682 } else if (softc->flags & SA_FLAG_INVALID) {
686 * Preserve whether this is a read_only open.
688 softc->open_rdonly = (flags & O_RDWR) == O_RDONLY;
691 * The function samount ensures media is loaded and ready.
692 * It also does a device RESERVE if the tape isn't yet mounted.
694 * If the mount fails and this was a non-blocking open,
695 * make this a 'open_pending_mount' action.
697 error = samount(periph, flags, dev);
698 if (error && (flags & O_NONBLOCK)) {
699 softc->flags |= SA_FLAG_OPEN;
700 softc->open_pending_mount = 1;
702 cam_periph_unhold(periph);
703 cam_periph_unlock(periph);
709 cam_periph_unhold(periph);
710 cam_periph_unlock(periph);
711 cam_periph_release(periph);
715 saprevent(periph, PR_PREVENT);
716 softc->flags |= SA_FLAG_OPEN;
719 cam_periph_unhold(periph);
720 cam_periph_unlock(periph);
725 saclose(struct cdev *dev, int flag, int fmt, struct thread *td)
727 struct cam_periph *periph;
728 struct sa_softc *softc;
729 int mode, error, writing, tmp, i;
730 int closedbits = SA_FLAG_OPEN;
733 periph = (struct cam_periph *)dev->si_drv1;
737 cam_periph_lock(periph);
739 softc = (struct sa_softc *)periph->softc;
741 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE|CAM_DEBUG_INFO,
742 ("saclose(%s): softc=0x%x\n", devtoname(dev), softc->flags));
745 softc->open_rdonly = 0;
746 if (SA_IS_CTRL(dev)) {
747 softc->ctrl_mode = 0;
749 cam_periph_unlock(periph);
750 cam_periph_release(periph);
754 if (softc->open_pending_mount) {
755 softc->flags &= ~SA_FLAG_OPEN;
756 softc->open_pending_mount = 0;
758 cam_periph_unlock(periph);
759 cam_periph_release(periph);
763 if ((error = cam_periph_hold(periph, PRIBIO)) != 0) {
764 cam_periph_unlock(periph);
769 * Were we writing the tape?
771 writing = (softc->flags & SA_FLAG_TAPE_WRITTEN) != 0;
774 * See whether or not we need to write filemarks. If this
775 * fails, we probably have to assume we've lost tape
778 error = sacheckeod(periph);
780 xpt_print(periph->path,
781 "failed to write terminating filemark(s)\n");
782 softc->flags |= SA_FLAG_TAPE_FROZEN;
786 * Whatever we end up doing, allow users to eject tapes from here on.
788 saprevent(periph, PR_ALLOW);
791 * Decide how to end...
793 if ((softc->flags & SA_FLAG_TAPE_MOUNTED) == 0) {
794 closedbits |= SA_FLAG_TAPE_FROZEN;
795 } else switch (mode) {
796 case SA_MODE_OFFLINE:
798 * An 'offline' close is an unconditional release of
799 * frozen && mount conditions, irrespective of whether
800 * these operations succeeded. The reason for this is
801 * to allow at least some kind of programmatic way
802 * around our state getting all fouled up. If somebody
803 * issues an 'offline' command, that will be allowed
806 (void) sarewind(periph);
807 (void) saloadunload(periph, FALSE);
808 closedbits |= SA_FLAG_TAPE_MOUNTED|SA_FLAG_TAPE_FROZEN;
812 * If the rewind fails, return an error- if anyone cares,
813 * but not overwriting any previous error.
815 * We don't clear the notion of mounted here, but we do
816 * clear the notion of frozen if we successfully rewound.
818 tmp = sarewind(periph);
823 closedbits |= SA_FLAG_TAPE_FROZEN;
826 case SA_MODE_NOREWIND:
828 * If we're not rewinding/unloading the tape, find out
829 * whether we need to back up over one of two filemarks
830 * we wrote (if we wrote two filemarks) so that appends
831 * from this point on will be sane.
833 if (error == 0 && writing && (softc->quirks & SA_QUIRK_2FM)) {
834 tmp = saspace(periph, -1, SS_FILEMARKS);
836 xpt_print(periph->path, "unable to backspace "
837 "over one of double filemarks at end of "
839 xpt_print(periph->path, "it is possible that "
840 "this device needs a SA_QUIRK_1FM quirk set"
842 softc->flags |= SA_FLAG_TAPE_FROZEN;
847 xpt_print(periph->path, "unknown mode 0x%x in saclose\n", mode);
853 * We wish to note here that there are no more filemarks to be written.
855 softc->filemarks = 0;
856 softc->flags &= ~SA_FLAG_TAPE_WRITTEN;
859 * And we are no longer open for business.
861 softc->flags &= ~closedbits;
865 * Invalidate any density information that depends on having tape
866 * media in the drive.
868 for (i = 0; i < SA_DENSITY_TYPES; i++) {
869 if (softc->density_type_bits[i] & SRDS_MEDIA)
870 softc->density_info_valid[i] = 0;
874 * Inform users if tape state if frozen....
876 if (softc->flags & SA_FLAG_TAPE_FROZEN) {
877 xpt_print(periph->path, "tape is now frozen- use an OFFLINE, "
878 "REWIND or MTEOM command to clear this state.\n");
881 /* release the device if it is no longer mounted */
882 if ((softc->flags & SA_FLAG_TAPE_MOUNTED) == 0)
883 sareservereleaseunit(periph, FALSE);
885 cam_periph_unhold(periph);
886 cam_periph_unlock(periph);
887 cam_periph_release(periph);
893 * Actually translate the requested transfer into one the physical driver
894 * can understand. The transfer is described by a buf and will include
895 * only one physical transfer.
898 sastrategy(struct bio *bp)
900 struct cam_periph *periph;
901 struct sa_softc *softc;
903 bp->bio_resid = bp->bio_bcount;
904 if (SA_IS_CTRL(bp->bio_dev)) {
905 biofinish(bp, NULL, EINVAL);
908 periph = (struct cam_periph *)bp->bio_dev->si_drv1;
909 if (periph == NULL) {
910 biofinish(bp, NULL, ENXIO);
913 cam_periph_lock(periph);
915 softc = (struct sa_softc *)periph->softc;
917 if (softc->flags & SA_FLAG_INVALID) {
918 cam_periph_unlock(periph);
919 biofinish(bp, NULL, ENXIO);
923 if (softc->flags & SA_FLAG_TAPE_FROZEN) {
924 cam_periph_unlock(periph);
925 biofinish(bp, NULL, EPERM);
930 * This should actually never occur as the write(2)
931 * system call traps attempts to write to a read-only
934 if (bp->bio_cmd == BIO_WRITE && softc->open_rdonly) {
935 cam_periph_unlock(periph);
936 biofinish(bp, NULL, EBADF);
940 if (softc->open_pending_mount) {
941 int error = samount(periph, 0, bp->bio_dev);
943 cam_periph_unlock(periph);
944 biofinish(bp, NULL, ENXIO);
947 saprevent(periph, PR_PREVENT);
948 softc->open_pending_mount = 0;
953 * If it's a null transfer, return immediately
955 if (bp->bio_bcount == 0) {
956 cam_periph_unlock(periph);
962 if (softc->flags & SA_FLAG_FIXED) {
964 * Fixed block device. The byte count must
965 * be a multiple of our block size.
967 if (((softc->blk_mask != ~0) &&
968 ((bp->bio_bcount & softc->blk_mask) != 0)) ||
969 ((softc->blk_mask == ~0) &&
970 ((bp->bio_bcount % softc->min_blk) != 0))) {
971 xpt_print(periph->path, "Invalid request. Fixed block "
972 "device requests must be a multiple of %d bytes\n",
974 cam_periph_unlock(periph);
975 biofinish(bp, NULL, EINVAL);
978 } else if ((bp->bio_bcount > softc->max_blk) ||
979 (bp->bio_bcount < softc->min_blk) ||
980 (bp->bio_bcount & softc->blk_mask) != 0) {
982 xpt_print_path(periph->path);
983 printf("Invalid request. Variable block "
984 "device requests must be ");
985 if (softc->blk_mask != 0) {
986 printf("a multiple of %d ", (0x1 << softc->blk_gran));
988 printf("between %d and %d bytes\n", softc->min_blk,
990 cam_periph_unlock(periph);
991 biofinish(bp, NULL, EINVAL);
996 * Place it at the end of the queue.
998 bioq_insert_tail(&softc->bio_queue, bp);
999 softc->queue_count++;
1001 CAM_DEBUG(periph->path, CAM_DEBUG_INFO,
1002 ("sastrategy: queuing a %ld %s byte %s\n", bp->bio_bcount,
1003 (softc->flags & SA_FLAG_FIXED)? "fixed" : "variable",
1004 (bp->bio_cmd == BIO_READ)? "read" : "write"));
1006 if (softc->queue_count > 1) {
1007 CAM_DEBUG(periph->path, CAM_DEBUG_INFO,
1008 ("sastrategy: queue count now %d\n", softc->queue_count));
1012 * Schedule ourselves for performing the work.
1014 xpt_schedule(periph, CAM_PRIORITY_NORMAL);
1015 cam_periph_unlock(periph);
1021 sasetsili(struct cam_periph *periph, struct mtparamset *ps, int num_params)
1023 uint32_t sili_blocksize;
1024 struct sa_softc *softc;
1028 softc = (struct sa_softc *)periph->softc;
1030 if (ps->value_type != MT_PARAM_SET_SIGNED) {
1031 snprintf(ps->error_str, sizeof(ps->error_str),
1032 "sili is a signed parameter");
1035 if ((ps->value.value_signed < 0)
1036 || (ps->value.value_signed > 1)) {
1037 snprintf(ps->error_str, sizeof(ps->error_str),
1038 "invalid sili value %jd", (intmax_t)ps->value.value_signed);
1042 * We only set the SILI flag in variable block
1043 * mode. You'll get a check condition in fixed
1044 * block mode if things don't line up in any case.
1046 if (softc->flags & SA_FLAG_FIXED) {
1047 snprintf(ps->error_str, sizeof(ps->error_str),
1048 "can't set sili bit in fixed block mode");
1051 if (softc->sili == ps->value.value_signed)
1054 if (ps->value.value_signed == 1)
1059 error = sasetparams(periph, SA_PARAM_BLOCKSIZE,
1060 sili_blocksize, 0, 0, SF_QUIET_IR);
1062 snprintf(ps->error_str, sizeof(ps->error_str),
1063 "sasetparams() returned error %d", error);
1067 softc->sili = ps->value.value_signed;
1070 ps->status = MT_PARAM_STATUS_OK;
1074 ps->status = MT_PARAM_STATUS_ERROR;
1082 saseteotwarn(struct cam_periph *periph, struct mtparamset *ps, int num_params)
1084 struct sa_softc *softc;
1088 softc = (struct sa_softc *)periph->softc;
1090 if (ps->value_type != MT_PARAM_SET_SIGNED) {
1091 snprintf(ps->error_str, sizeof(ps->error_str),
1092 "eot_warn is a signed parameter");
1093 ps->status = MT_PARAM_STATUS_ERROR;
1096 if ((ps->value.value_signed < 0)
1097 || (ps->value.value_signed > 1)) {
1098 snprintf(ps->error_str, sizeof(ps->error_str),
1099 "invalid eot_warn value %jd\n",
1100 (intmax_t)ps->value.value_signed);
1101 ps->status = MT_PARAM_STATUS_ERROR;
1104 softc->eot_warn = ps->value.value_signed;
1105 ps->status = MT_PARAM_STATUS_OK;
1107 if (ps->status != MT_PARAM_STATUS_OK)
1115 safillprot(struct sa_softc *softc, int *indent, struct sbuf *sb)
1119 SASBADDNODE(sb, *indent, protection);
1120 if (softc->flags & SA_FLAG_PROTECT_SUPP)
1124 SASBADDINTDESC(sb, *indent, tmpint, %d, protection_supported,
1125 "Set to 1 if protection information is supported");
1128 && (softc->prot_info.cur_prot_state.initialized != 0)) {
1129 struct sa_prot_state *prot;
1131 prot = &softc->prot_info.cur_prot_state;
1133 SASBADDUINTDESC(sb, *indent, prot->prot_method, %u,
1134 prot_method, "Current Protection Method");
1135 SASBADDUINTDESC(sb, *indent, prot->pi_length, %u,
1136 pi_length, "Length of Protection Information");
1137 SASBADDUINTDESC(sb, *indent, prot->lbp_w, %u,
1138 lbp_w, "Check Protection on Writes");
1139 SASBADDUINTDESC(sb, *indent, prot->lbp_r, %u,
1140 lbp_r, "Check and Include Protection on Reads");
1141 SASBADDUINTDESC(sb, *indent, prot->rbdp, %u,
1142 rbdp, "Transfer Protection Information for RECOVER "
1143 "BUFFERED DATA command");
1145 SASBENDNODE(sb, *indent, protection);
1149 sapopulateprots(struct sa_prot_state *cur_state, struct sa_prot_map *new_table,
1154 bcopy(sa_prot_table, new_table, min(table_ents * sizeof(*new_table),
1155 sizeof(sa_prot_table)));
1157 table_ents = min(table_ents, SA_NUM_PROT_ENTS);
1159 for (i = 0; i < table_ents; i++)
1160 new_table[i].value = (uint32_t *)((uint8_t *)cur_state +
1161 new_table[i].offset);
1166 static struct sa_prot_map *
1167 safindprotent(char *name, struct sa_prot_map *table, int table_ents)
1169 char *prot_name = "protection.";
1172 prot_len = strlen(prot_name);
1175 * This shouldn't happen, but we check just in case.
1177 if (strncmp(name, prot_name, prot_len) != 0)
1180 for (i = 0; i < table_ents; i++) {
1181 if (strcmp(&name[prot_len], table[i].name) != 0)
1190 sasetprotents(struct cam_periph *periph, struct mtparamset *ps, int num_params)
1192 struct sa_softc *softc;
1193 struct sa_prot_map prot_ents[SA_NUM_PROT_ENTS];
1194 struct sa_prot_state new_state;
1198 softc = (struct sa_softc *)periph->softc;
1202 * Make sure that this tape drive supports protection information.
1203 * Otherwise we can't set anything.
1205 if ((softc->flags & SA_FLAG_PROTECT_SUPP) == 0) {
1206 snprintf(ps[0].error_str, sizeof(ps[0].error_str),
1207 "Protection information is not supported for this device");
1208 ps[0].status = MT_PARAM_STATUS_ERROR;
1213 * We can't operate with physio(9) splitting enabled, because there
1214 * is no way to insure (especially in variable block mode) that
1215 * what the user writes (with a checksum block at the end) will
1216 * make it into the sa(4) driver intact.
1218 if ((softc->si_flags & SI_NOSPLIT) == 0) {
1219 snprintf(ps[0].error_str, sizeof(ps[0].error_str),
1220 "Protection information cannot be enabled with I/O "
1222 ps[0].status = MT_PARAM_STATUS_ERROR;
1227 * Take the current cached protection state and use that as the
1228 * basis for our new entries.
1230 bcopy(&softc->prot_info.cur_prot_state, &new_state, sizeof(new_state));
1233 * Populate the table mapping property names to pointers into the
1236 sapopulateprots(&new_state, prot_ents, SA_NUM_PROT_ENTS);
1239 * For each parameter the user passed in, make sure the name, type
1240 * and value are valid.
1242 for (i = 0; i < num_params; i++) {
1243 struct sa_prot_map *ent;
1245 ent = safindprotent(ps[i].value_name, prot_ents,
1248 ps[i].status = MT_PARAM_STATUS_ERROR;
1249 snprintf(ps[i].error_str, sizeof(ps[i].error_str),
1250 "Invalid protection entry name %s",
1255 if (ent->param_type != ps[i].value_type) {
1256 ps[i].status = MT_PARAM_STATUS_ERROR;
1257 snprintf(ps[i].error_str, sizeof(ps[i].error_str),
1258 "Supplied type %d does not match actual type %d",
1259 ps[i].value_type, ent->param_type);
1263 if ((ps[i].value.value_unsigned < ent->min_val)
1264 || (ps[i].value.value_unsigned > ent->max_val)) {
1265 ps[i].status = MT_PARAM_STATUS_ERROR;
1266 snprintf(ps[i].error_str, sizeof(ps[i].error_str),
1267 "Value %ju is outside valid range %u - %u",
1268 (uintmax_t)ps[i].value.value_unsigned, ent->min_val,
1273 *(ent->value) = ps[i].value.value_unsigned;
1277 * Actually send the protection settings to the drive.
1279 error = sasetprot(periph, &new_state);
1281 for (i = 0; i < num_params; i++) {
1282 ps[i].status = MT_PARAM_STATUS_ERROR;
1283 snprintf(ps[i].error_str, sizeof(ps[i].error_str),
1284 "Unable to set parameter, see dmesg(8)");
1290 * Let the user know that his settings were stored successfully.
1292 for (i = 0; i < num_params; i++)
1293 ps[i].status = MT_PARAM_STATUS_OK;
1299 * Entry handlers generally only handle a single entry. Node handlers will
1300 * handle a contiguous range of parameters to set in a single call.
1303 SA_PARAM_TYPE_ENTRY,
1307 struct sa_param_ent {
1309 sa_param_type param_type;
1310 int (*set_func)(struct cam_periph *periph, struct mtparamset *ps,
1312 } sa_param_table[] = {
1313 {"sili", SA_PARAM_TYPE_ENTRY, sasetsili },
1314 {"eot_warn", SA_PARAM_TYPE_ENTRY, saseteotwarn },
1315 {"protection.", SA_PARAM_TYPE_NODE, sasetprotents }
1318 static struct sa_param_ent *
1319 safindparament(struct mtparamset *ps)
1323 for (i = 0; i < sizeof(sa_param_table) /sizeof(sa_param_table[0]); i++){
1325 * For entries, we compare all of the characters. For
1326 * nodes, we only compare the first N characters. The node
1327 * handler will decode the rest.
1329 if (sa_param_table[i].param_type == SA_PARAM_TYPE_ENTRY) {
1330 if (strcmp(ps->value_name, sa_param_table[i].name) != 0)
1333 if (strncmp(ps->value_name, sa_param_table[i].name,
1334 strlen(sa_param_table[i].name)) != 0)
1337 return (&sa_param_table[i]);
1344 * Go through a list of parameters, coalescing contiguous parameters with
1345 * the same parent node into a single call to a set_func.
1348 saparamsetlist(struct cam_periph *periph, struct mtsetlist *list,
1353 struct mtparamset *params, *first;
1354 struct sa_param_ent *first_ent;
1359 if (list->num_params == 0)
1364 * Verify that the user has the correct structure size.
1366 if ((list->num_params * sizeof(struct mtparamset)) !=
1368 xpt_print(periph->path, "%s: length of params %d != "
1369 "sizeof(struct mtparamset) %zd * num_params %d\n",
1370 __func__, list->param_len, sizeof(struct mtparamset),
1376 if (need_copy != 0) {
1378 * XXX KDM will dropping the lock cause an issue here?
1380 cam_periph_unlock(periph);
1381 params = malloc(list->param_len, M_SCSISA, M_WAITOK | M_ZERO);
1382 error = copyin(list->params, params, list->param_len);
1383 cam_periph_lock(periph);
1388 params = list->params;
1394 for (i = 0; i < list->num_params; i++) {
1395 struct sa_param_ent *ent;
1397 ent = safindparament(¶ms[i]);
1399 snprintf(params[i].error_str,
1400 sizeof(params[i].error_str),
1401 "%s: cannot find parameter %s", __func__,
1402 params[i].value_name);
1403 params[i].status = MT_PARAM_STATUS_ERROR;
1407 if (first != NULL) {
1408 if (first_ent == ent) {
1410 * We're still in a contiguous list of
1411 * parameters that can be handled by one
1417 error = first_ent->set_func(periph, first,
1428 if (ent->param_type == SA_PARAM_TYPE_NODE) {
1433 error = ent->set_func(periph, ¶ms[i], 1);
1441 first_ent->set_func(periph, first, contig_ents);
1444 if (need_copy != 0) {
1445 if (error != EFAULT) {
1446 cam_periph_unlock(periph);
1447 copyout(params, list->params, list->param_len);
1448 cam_periph_lock(periph);
1450 free(params, M_SCSISA);
1456 sagetparams_common(struct cdev *dev, struct cam_periph *periph)
1458 struct sa_softc *softc;
1459 u_int8_t write_protect;
1460 int comp_enabled, comp_supported, error;
1462 softc = (struct sa_softc *)periph->softc;
1464 if (softc->open_pending_mount)
1467 /* The control device may issue getparams() if there are no opens. */
1468 if (SA_IS_CTRL(dev) && (softc->flags & SA_FLAG_OPEN) != 0)
1471 error = sagetparams(periph, SA_PARAM_ALL, &softc->media_blksize,
1472 &softc->media_density, &softc->media_numblks, &softc->buffer_mode,
1473 &write_protect, &softc->speed, &comp_supported, &comp_enabled,
1474 &softc->comp_algorithm, NULL, NULL, 0, 0);
1478 softc->flags |= SA_FLAG_TAPE_WP;
1480 softc->flags &= ~SA_FLAG_TAPE_WP;
1481 softc->flags &= ~SA_FLAG_COMPRESSION;
1482 if (comp_supported) {
1483 if (softc->saved_comp_algorithm == 0)
1484 softc->saved_comp_algorithm =
1485 softc->comp_algorithm;
1486 softc->flags |= SA_FLAG_COMP_SUPP;
1488 softc->flags |= SA_FLAG_COMP_ENABLED;
1490 softc->flags |= SA_FLAG_COMP_UNSUPP;
1495 #define PENDING_MOUNT_CHECK(softc, periph, dev) \
1496 if (softc->open_pending_mount) { \
1497 error = samount(periph, 0, dev); \
1501 saprevent(periph, PR_PREVENT); \
1502 softc->open_pending_mount = 0; \
1506 saioctl(struct cdev *dev, u_long cmd, caddr_t arg, int flag, struct thread *td)
1508 struct cam_periph *periph;
1509 struct sa_softc *softc;
1510 scsi_space_code spaceop;
1511 int didlockperiph = 0;
1516 error = 0; /* shut up gcc */
1517 spaceop = 0; /* shut up gcc */
1519 periph = (struct cam_periph *)dev->si_drv1;
1523 cam_periph_lock(periph);
1524 softc = (struct sa_softc *)periph->softc;
1527 * Check for control mode accesses. We allow MTIOCGET and
1528 * MTIOCERRSTAT (but need to be the only one open in order
1529 * to clear latched status), and MTSETBSIZE, MTSETDNSTY
1530 * and MTCOMP (but need to be the only one accessing this
1531 * device to run those).
1534 if (SA_IS_CTRL(dev)) {
1536 case MTIOCGETEOTMODEL:
1544 * If the periph isn't already locked, lock it
1545 * so our MTIOCERRSTAT can reset latched error stats.
1547 * If the periph is already locked, skip it because
1548 * we're just getting status and it'll be up to the
1549 * other thread that has this device open to do
1550 * an MTIOCERRSTAT that would clear latched status.
1552 if ((periph->flags & CAM_PERIPH_LOCKED) == 0) {
1553 error = cam_periph_hold(periph, PRIBIO|PCATCH);
1555 cam_periph_unlock(periph);
1564 struct mtop *mt = (struct mtop *) arg;
1567 * Check to make sure it's an OP we can perform
1568 * with no media inserted.
1570 switch (mt->mt_op) {
1584 case MTIOCSETEOTMODEL:
1586 * We need to acquire the peripheral here rather
1587 * than at open time because we are sharing writable
1588 * access to data structures.
1590 error = cam_periph_hold(periph, PRIBIO|PCATCH);
1592 cam_periph_unlock(periph);
1599 cam_periph_unlock(periph);
1605 * Find the device that the user is talking about
1610 struct mtget *g = (struct mtget *)arg;
1612 error = sagetparams_common(dev, periph);
1615 bzero(g, sizeof(struct mtget));
1616 g->mt_type = MT_ISAR;
1617 if (softc->flags & SA_FLAG_COMP_UNSUPP) {
1618 g->mt_comp = MT_COMP_UNSUPP;
1619 g->mt_comp0 = MT_COMP_UNSUPP;
1620 g->mt_comp1 = MT_COMP_UNSUPP;
1621 g->mt_comp2 = MT_COMP_UNSUPP;
1622 g->mt_comp3 = MT_COMP_UNSUPP;
1624 if ((softc->flags & SA_FLAG_COMP_ENABLED) == 0) {
1625 g->mt_comp = MT_COMP_DISABLED;
1627 g->mt_comp = softc->comp_algorithm;
1629 g->mt_comp0 = softc->comp_algorithm;
1630 g->mt_comp1 = softc->comp_algorithm;
1631 g->mt_comp2 = softc->comp_algorithm;
1632 g->mt_comp3 = softc->comp_algorithm;
1634 g->mt_density = softc->media_density;
1635 g->mt_density0 = softc->media_density;
1636 g->mt_density1 = softc->media_density;
1637 g->mt_density2 = softc->media_density;
1638 g->mt_density3 = softc->media_density;
1639 g->mt_blksiz = softc->media_blksize;
1640 g->mt_blksiz0 = softc->media_blksize;
1641 g->mt_blksiz1 = softc->media_blksize;
1642 g->mt_blksiz2 = softc->media_blksize;
1643 g->mt_blksiz3 = softc->media_blksize;
1644 g->mt_fileno = softc->fileno;
1645 g->mt_blkno = softc->blkno;
1646 g->mt_dsreg = (short) softc->dsreg;
1648 * Yes, we know that this is likely to overflow
1650 if (softc->last_resid_was_io) {
1651 if ((g->mt_resid = (short) softc->last_io_resid) != 0) {
1652 if (SA_IS_CTRL(dev) == 0 || didlockperiph) {
1653 softc->last_io_resid = 0;
1657 if ((g->mt_resid = (short)softc->last_ctl_resid) != 0) {
1658 if (SA_IS_CTRL(dev) == 0 || didlockperiph) {
1659 softc->last_ctl_resid = 0;
1669 struct mtextget *g = (struct mtextget *)arg;
1674 * Report drive status using an XML format.
1678 * XXX KDM will dropping the lock cause any problems here?
1680 cam_periph_unlock(periph);
1681 sb = sbuf_new(NULL, NULL, g->alloc_len, SBUF_FIXEDLEN);
1683 g->status = MT_EXT_GET_ERROR;
1684 snprintf(g->error_str, sizeof(g->error_str),
1685 "Unable to allocate %d bytes for status info",
1687 cam_periph_lock(periph);
1688 goto extget_bailout;
1690 cam_periph_lock(periph);
1692 if (cmd == MTIOCEXTGET)
1693 error = saextget(dev, periph, sb, g);
1695 error = saparamget(softc, sb);
1698 goto extget_bailout;
1700 error = sbuf_finish(sb);
1701 if (error == ENOMEM) {
1702 g->status = MT_EXT_GET_NEED_MORE_SPACE;
1704 } else if (error != 0) {
1705 g->status = MT_EXT_GET_ERROR;
1706 snprintf(g->error_str, sizeof(g->error_str),
1707 "Error %d returned from sbuf_finish()", error);
1709 g->status = MT_EXT_GET_OK;
1712 tmpstr2 = sbuf_data(sb);
1713 g->fill_len = strlen(tmpstr2) + 1;
1714 cam_periph_unlock(periph);
1716 error = copyout(tmpstr2, g->status_xml, g->fill_len);
1718 cam_periph_lock(periph);
1726 struct mtsetlist list;
1727 struct mtparamset *ps = (struct mtparamset *)arg;
1729 bzero(&list, sizeof(list));
1730 list.num_params = 1;
1731 list.param_len = sizeof(*ps);
1734 error = saparamsetlist(periph, &list, /*need_copy*/ 0);
1739 struct mtsetlist *list = (struct mtsetlist *)arg;
1741 error = saparamsetlist(periph, list, /*need_copy*/ 1);
1746 struct scsi_tape_errors *sep =
1747 &((union mterrstat *)arg)->scsi_errstat;
1749 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE,
1750 ("saioctl: MTIOCERRSTAT\n"));
1752 bzero(sep, sizeof(*sep));
1753 sep->io_resid = softc->last_io_resid;
1754 bcopy((caddr_t) &softc->last_io_sense, sep->io_sense,
1755 sizeof (sep->io_sense));
1756 bcopy((caddr_t) &softc->last_io_cdb, sep->io_cdb,
1757 sizeof (sep->io_cdb));
1758 sep->ctl_resid = softc->last_ctl_resid;
1759 bcopy((caddr_t) &softc->last_ctl_sense, sep->ctl_sense,
1760 sizeof (sep->ctl_sense));
1761 bcopy((caddr_t) &softc->last_ctl_cdb, sep->ctl_cdb,
1762 sizeof (sep->ctl_cdb));
1764 if ((SA_IS_CTRL(dev) == 0 && !softc->open_pending_mount) ||
1766 bzero((caddr_t) &softc->errinfo,
1767 sizeof (softc->errinfo));
1776 PENDING_MOUNT_CHECK(softc, periph, dev);
1778 mt = (struct mtop *)arg;
1781 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE,
1782 ("saioctl: op=0x%x count=0x%x\n",
1783 mt->mt_op, mt->mt_count));
1785 count = mt->mt_count;
1786 switch (mt->mt_op) {
1787 case MTWEOF: /* write an end-of-file marker */
1789 * We don't need to clear the SA_FLAG_TAPE_WRITTEN
1790 * flag because by keeping track of filemarks
1791 * we have last written we know whether or not
1792 * we need to write more when we close the device.
1794 error = sawritefilemarks(periph, count, FALSE, FALSE);
1797 /* write an end-of-file marker without waiting */
1798 error = sawritefilemarks(periph, count, FALSE, TRUE);
1800 case MTWSS: /* write a setmark */
1801 error = sawritefilemarks(periph, count, TRUE, FALSE);
1803 case MTBSR: /* backward space record */
1804 case MTFSR: /* forward space record */
1805 case MTBSF: /* backward space file */
1806 case MTFSF: /* forward space file */
1807 case MTBSS: /* backward space setmark */
1808 case MTFSS: /* forward space setmark */
1809 case MTEOD: /* space to end of recorded medium */
1813 spaceop = SS_FILEMARKS;
1814 nmarks = softc->filemarks;
1815 error = sacheckeod(periph);
1817 xpt_print(periph->path,
1818 "EOD check prior to spacing failed\n");
1819 softc->flags |= SA_FLAG_EIO_PENDING;
1822 nmarks -= softc->filemarks;
1828 spaceop = SS_BLOCKS;
1839 spaceop = SS_SETMARKS;
1853 nmarks = softc->filemarks;
1855 * XXX: Why are we checking again?
1857 error = sacheckeod(periph);
1860 nmarks -= softc->filemarks;
1861 error = saspace(periph, count - nmarks, spaceop);
1863 * At this point, clear that we've written the tape
1864 * and that we've written any filemarks. We really
1865 * don't know what the applications wishes to do next-
1866 * the sacheckeod's will make sure we terminated the
1867 * tape correctly if we'd been writing, but the next
1868 * action the user application takes will set again
1869 * whether we need to write filemarks.
1872 ~(SA_FLAG_TAPE_WRITTEN|SA_FLAG_TAPE_FROZEN);
1873 softc->filemarks = 0;
1876 case MTREW: /* rewind */
1877 PENDING_MOUNT_CHECK(softc, periph, dev);
1878 (void) sacheckeod(periph);
1879 error = sarewind(periph);
1882 ~(SA_FLAG_TAPE_WRITTEN|SA_FLAG_TAPE_FROZEN);
1883 softc->flags &= ~SA_FLAG_ERR_PENDING;
1884 softc->filemarks = 0;
1886 case MTERASE: /* erase */
1887 PENDING_MOUNT_CHECK(softc, periph, dev);
1888 error = saerase(periph, count);
1890 ~(SA_FLAG_TAPE_WRITTEN|SA_FLAG_TAPE_FROZEN);
1891 softc->flags &= ~SA_FLAG_ERR_PENDING;
1893 case MTRETENS: /* re-tension tape */
1894 PENDING_MOUNT_CHECK(softc, periph, dev);
1895 error = saretension(periph);
1897 ~(SA_FLAG_TAPE_WRITTEN|SA_FLAG_TAPE_FROZEN);
1898 softc->flags &= ~SA_FLAG_ERR_PENDING;
1900 case MTOFFL: /* rewind and put the drive offline */
1902 PENDING_MOUNT_CHECK(softc, periph, dev);
1904 (void) sacheckeod(periph);
1906 softc->flags &= ~SA_FLAG_TAPE_WRITTEN;
1907 softc->filemarks = 0;
1909 error = sarewind(periph);
1910 /* clear the frozen flag anyway */
1911 softc->flags &= ~SA_FLAG_TAPE_FROZEN;
1914 * Be sure to allow media removal before ejecting.
1917 saprevent(periph, PR_ALLOW);
1919 error = saloadunload(periph, FALSE);
1921 softc->flags &= ~SA_FLAG_TAPE_MOUNTED;
1927 error = saloadunload(periph, TRUE);
1929 case MTNOP: /* no operation, sets status only */
1930 case MTCACHE: /* enable controller cache */
1931 case MTNOCACHE: /* disable controller cache */
1935 case MTSETBSIZ: /* Set block size for device */
1937 PENDING_MOUNT_CHECK(softc, periph, dev);
1939 if ((softc->sili != 0)
1941 xpt_print(periph->path, "Can't enter fixed "
1942 "block mode with SILI enabled\n");
1946 error = sasetparams(periph, SA_PARAM_BLOCKSIZE, count,
1949 softc->last_media_blksize =
1950 softc->media_blksize;
1951 softc->media_blksize = count;
1953 softc->flags |= SA_FLAG_FIXED;
1954 if (powerof2(count)) {
1957 softc->blk_mask = count - 1;
1959 softc->blk_mask = ~0;
1960 softc->blk_shift = 0;
1963 * Make the user's desire 'persistent'.
1965 softc->quirks &= ~SA_QUIRK_VARIABLE;
1966 softc->quirks |= SA_QUIRK_FIXED;
1968 softc->flags &= ~SA_FLAG_FIXED;
1969 if (softc->max_blk == 0) {
1970 softc->max_blk = ~0;
1972 softc->blk_shift = 0;
1973 if (softc->blk_gran != 0) {
1975 softc->blk_gran - 1;
1977 softc->blk_mask = 0;
1980 * Make the user's desire 'persistent'.
1982 softc->quirks |= SA_QUIRK_VARIABLE;
1983 softc->quirks &= ~SA_QUIRK_FIXED;
1987 case MTSETDNSTY: /* Set density for device and mode */
1988 PENDING_MOUNT_CHECK(softc, periph, dev);
1990 if (count > UCHAR_MAX) {
1994 error = sasetparams(periph, SA_PARAM_DENSITY,
1998 case MTCOMP: /* enable compression */
1999 PENDING_MOUNT_CHECK(softc, periph, dev);
2001 * Some devices don't support compression, and
2002 * don't like it if you ask them for the
2005 if ((softc->quirks & SA_QUIRK_NOCOMP) ||
2006 (softc->flags & SA_FLAG_COMP_UNSUPP)) {
2010 error = sasetparams(periph, SA_PARAM_COMPRESSION,
2011 0, 0, count, SF_NO_PRINT);
2023 PENDING_MOUNT_CHECK(softc, periph, dev);
2024 error = sardpos(periph, 0, (u_int32_t *) arg);
2027 PENDING_MOUNT_CHECK(softc, periph, dev);
2028 error = sardpos(periph, 1, (u_int32_t *) arg);
2031 case MTIOCHLOCATE: {
2032 struct mtlocate locate_info;
2035 bzero(&locate_info, sizeof(locate_info));
2036 locate_info.logical_id = *((uint32_t *)arg);
2037 if (cmd == MTIOCSLOCATE)
2042 PENDING_MOUNT_CHECK(softc, periph, dev);
2044 error = sasetpos(periph, hard, &locate_info);
2047 case MTIOCEXTLOCATE:
2048 PENDING_MOUNT_CHECK(softc, periph, dev);
2049 error = sasetpos(periph, /*hard*/ 0, (struct mtlocate *)arg);
2051 ~(SA_FLAG_TAPE_WRITTEN|SA_FLAG_TAPE_FROZEN);
2052 softc->flags &= ~SA_FLAG_ERR_PENDING;
2053 softc->filemarks = 0;
2055 case MTIOCGETEOTMODEL:
2057 if (softc->quirks & SA_QUIRK_1FM)
2061 *((u_int32_t *) arg) = mode;
2063 case MTIOCSETEOTMODEL:
2065 switch (*((u_int32_t *) arg)) {
2067 softc->quirks &= ~SA_QUIRK_2FM;
2068 softc->quirks |= SA_QUIRK_1FM;
2071 softc->quirks &= ~SA_QUIRK_1FM;
2072 softc->quirks |= SA_QUIRK_2FM;
2080 struct mtrblim *rblim;
2082 rblim = (struct mtrblim *)arg;
2084 rblim->granularity = softc->blk_gran;
2085 rblim->min_block_length = softc->min_blk;
2086 rblim->max_block_length = softc->max_blk;
2090 error = cam_periph_ioctl(periph, cmd, arg, saerror);
2095 * Check to see if we cleared a frozen state
2097 if (error == 0 && (softc->flags & SA_FLAG_TAPE_FROZEN)) {
2104 * XXX KDM look at this.
2106 softc->fileno = (daddr_t) -1;
2107 softc->blkno = (daddr_t) -1;
2108 softc->rep_blkno = (daddr_t) -1;
2109 softc->rep_fileno = (daddr_t) -1;
2110 softc->partition = (daddr_t) -1;
2111 softc->flags &= ~SA_FLAG_TAPE_FROZEN;
2112 xpt_print(periph->path,
2113 "tape state now unfrozen.\n");
2119 if (didlockperiph) {
2120 cam_periph_unhold(periph);
2122 cam_periph_unlock(periph);
2132 * Install a global async callback.
2134 status = xpt_register_async(AC_FOUND_DEVICE, saasync, NULL, NULL);
2136 if (status != CAM_REQ_CMP) {
2137 printf("sa: Failed to attach master async callback "
2138 "due to status 0x%x!\n", status);
2143 sadevgonecb(void *arg)
2145 struct cam_periph *periph;
2147 struct sa_softc *softc;
2149 periph = (struct cam_periph *)arg;
2150 softc = (struct sa_softc *)periph->softc;
2152 mtx = cam_periph_mtx(periph);
2155 softc->num_devs_to_destroy--;
2156 if (softc->num_devs_to_destroy == 0) {
2160 * When we have gotten all of our callbacks, we will get
2161 * no more close calls from devfs. So if we have any
2162 * dangling opens, we need to release the reference held
2163 * for that particular context.
2165 for (i = 0; i < softc->open_count; i++)
2166 cam_periph_release_locked(periph);
2168 softc->open_count = 0;
2171 * Release the reference held for devfs, all of our
2172 * instances are gone now.
2174 cam_periph_release_locked(periph);
2178 * We reference the lock directly here, instead of using
2179 * cam_periph_unlock(). The reason is that the final call to
2180 * cam_periph_release_locked() above could result in the periph
2181 * getting freed. If that is the case, dereferencing the periph
2182 * with a cam_periph_unlock() call would cause a page fault.
2188 saoninvalidate(struct cam_periph *periph)
2190 struct sa_softc *softc;
2192 softc = (struct sa_softc *)periph->softc;
2195 * De-register any async callbacks.
2197 xpt_register_async(0, saasync, periph, periph->path);
2199 softc->flags |= SA_FLAG_INVALID;
2202 * Return all queued I/O with ENXIO.
2203 * XXX Handle any transactions queued to the card
2204 * with XPT_ABORT_CCB.
2206 bioq_flush(&softc->bio_queue, NULL, ENXIO);
2207 softc->queue_count = 0;
2210 * Tell devfs that all of our devices have gone away, and ask for a
2211 * callback when it has cleaned up its state.
2213 destroy_dev_sched_cb(softc->devs.ctl_dev, sadevgonecb, periph);
2214 destroy_dev_sched_cb(softc->devs.r_dev, sadevgonecb, periph);
2215 destroy_dev_sched_cb(softc->devs.nr_dev, sadevgonecb, periph);
2216 destroy_dev_sched_cb(softc->devs.er_dev, sadevgonecb, periph);
2220 sacleanup(struct cam_periph *periph)
2222 struct sa_softc *softc;
2224 softc = (struct sa_softc *)periph->softc;
2226 cam_periph_unlock(periph);
2228 if ((softc->flags & SA_FLAG_SCTX_INIT) != 0
2229 && sysctl_ctx_free(&softc->sysctl_ctx) != 0)
2230 xpt_print(periph->path, "can't remove sysctl context\n");
2232 cam_periph_lock(periph);
2234 devstat_remove_entry(softc->device_stats);
2236 free(softc, M_SCSISA);
2240 saasync(void *callback_arg, u_int32_t code,
2241 struct cam_path *path, void *arg)
2243 struct cam_periph *periph;
2245 periph = (struct cam_periph *)callback_arg;
2247 case AC_FOUND_DEVICE:
2249 struct ccb_getdev *cgd;
2252 cgd = (struct ccb_getdev *)arg;
2256 if (cgd->protocol != PROTO_SCSI)
2258 if (SID_QUAL(&cgd->inq_data) != SID_QUAL_LU_CONNECTED)
2260 if (SID_TYPE(&cgd->inq_data) != T_SEQUENTIAL)
2264 * Allocate a peripheral instance for
2265 * this device and start the probe
2268 status = cam_periph_alloc(saregister, saoninvalidate,
2270 "sa", CAM_PERIPH_BIO, path,
2271 saasync, AC_FOUND_DEVICE, cgd);
2273 if (status != CAM_REQ_CMP
2274 && status != CAM_REQ_INPROG)
2275 printf("saasync: Unable to probe new device "
2276 "due to status 0x%x\n", status);
2280 cam_periph_async(periph, code, path, arg);
2286 sasetupdev(struct sa_softc *softc, struct cdev *dev)
2288 dev->si_drv1 = softc->periph;
2289 dev->si_iosize_max = softc->maxio;
2290 dev->si_flags |= softc->si_flags;
2292 * Keep a count of how many non-alias devices we have created,
2293 * so we can make sure we clean them all up on shutdown. Aliases
2294 * are cleaned up when we destroy the device they're an alias for.
2296 if ((dev->si_flags & SI_ALIAS) == 0)
2297 softc->num_devs_to_destroy++;
2301 sasysctlinit(void *context, int pending)
2303 struct cam_periph *periph;
2304 struct sa_softc *softc;
2305 char tmpstr[80], tmpstr2[80];
2307 periph = (struct cam_periph *)context;
2309 * If the periph is invalid, no need to setup the sysctls.
2311 if (periph->flags & CAM_PERIPH_INVALID)
2314 softc = (struct sa_softc *)periph->softc;
2316 snprintf(tmpstr, sizeof(tmpstr), "CAM SA unit %d", periph->unit_number);
2317 snprintf(tmpstr2, sizeof(tmpstr2), "%u", periph->unit_number);
2319 sysctl_ctx_init(&softc->sysctl_ctx);
2320 softc->flags |= SA_FLAG_SCTX_INIT;
2321 softc->sysctl_tree = SYSCTL_ADD_NODE(&softc->sysctl_ctx,
2322 SYSCTL_STATIC_CHILDREN(_kern_cam_sa), OID_AUTO, tmpstr2,
2323 CTLFLAG_RD, 0, tmpstr);
2324 if (softc->sysctl_tree == NULL)
2327 SYSCTL_ADD_INT(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree),
2328 OID_AUTO, "allow_io_split", CTLFLAG_RDTUN | CTLFLAG_NOFETCH,
2329 &softc->allow_io_split, 0, "Allow Splitting I/O");
2330 SYSCTL_ADD_INT(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree),
2331 OID_AUTO, "maxio", CTLFLAG_RD,
2332 &softc->maxio, 0, "Maximum I/O size");
2333 SYSCTL_ADD_INT(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree),
2334 OID_AUTO, "cpi_maxio", CTLFLAG_RD,
2335 &softc->cpi_maxio, 0, "Maximum Controller I/O size");
2339 * Release the reference that was held when this task was enqueued.
2341 cam_periph_release(periph);
2345 saregister(struct cam_periph *periph, void *arg)
2347 struct sa_softc *softc;
2348 struct ccb_getdev *cgd;
2349 struct ccb_pathinq cpi;
2353 cgd = (struct ccb_getdev *)arg;
2355 printf("saregister: no getdev CCB, can't register device\n");
2356 return (CAM_REQ_CMP_ERR);
2359 softc = (struct sa_softc *)
2360 malloc(sizeof (*softc), M_SCSISA, M_NOWAIT | M_ZERO);
2361 if (softc == NULL) {
2362 printf("saregister: Unable to probe new device. "
2363 "Unable to allocate softc\n");
2364 return (CAM_REQ_CMP_ERR);
2366 softc->scsi_rev = SID_ANSI_REV(&cgd->inq_data);
2367 softc->state = SA_STATE_NORMAL;
2368 softc->fileno = (daddr_t) -1;
2369 softc->blkno = (daddr_t) -1;
2370 softc->rep_fileno = (daddr_t) -1;
2371 softc->rep_blkno = (daddr_t) -1;
2372 softc->partition = (daddr_t) -1;
2377 bioq_init(&softc->bio_queue);
2378 softc->periph = periph;
2379 periph->softc = softc;
2382 * See if this device has any quirks.
2384 match = cam_quirkmatch((caddr_t)&cgd->inq_data,
2385 (caddr_t)sa_quirk_table,
2386 sizeof(sa_quirk_table)/sizeof(*sa_quirk_table),
2387 sizeof(*sa_quirk_table), scsi_inquiry_match);
2389 if (match != NULL) {
2390 softc->quirks = ((struct sa_quirk_entry *)match)->quirks;
2391 softc->last_media_blksize =
2392 ((struct sa_quirk_entry *)match)->prefblk;
2394 softc->quirks = SA_QUIRK_NONE;
2397 * Long format data for READ POSITION was introduced in SSC, which
2398 * was after SCSI-2. (Roughly equivalent to SCSI-3.) If the drive
2399 * reports that it is SCSI-2 or older, it is unlikely to support
2400 * long position data, but it might. Some drives from that era
2401 * claim to be SCSI-2, but do support long position information.
2402 * So, instead of immediately disabling long position information
2403 * for SCSI-2 devices, we'll try one pass through sagetpos(), and
2404 * then disable long position information if we get an error.
2406 if (cgd->inq_data.version <= SCSI_REV_CCS)
2407 softc->quirks |= SA_QUIRK_NO_LONG_POS;
2409 if (cgd->inq_data.spc3_flags & SPC3_SID_PROTECT) {
2410 struct ccb_dev_advinfo cdai;
2411 struct scsi_vpd_extended_inquiry_data ext_inq;
2413 bzero(&ext_inq, sizeof(ext_inq));
2415 xpt_setup_ccb(&cdai.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
2417 cdai.ccb_h.func_code = XPT_DEV_ADVINFO;
2418 cdai.flags = CDAI_FLAG_NONE;
2419 cdai.buftype = CDAI_TYPE_EXT_INQ;
2420 cdai.bufsiz = sizeof(ext_inq);
2421 cdai.buf = (uint8_t *)&ext_inq;
2422 xpt_action((union ccb *)&cdai);
2424 if ((cdai.ccb_h.status & CAM_DEV_QFRZN) != 0)
2425 cam_release_devq(cdai.ccb_h.path, 0, 0, 0, FALSE);
2426 if ((cdai.ccb_h.status == CAM_REQ_CMP)
2427 && (ext_inq.flags1 & SVPD_EID_SA_SPT_LBP))
2428 softc->flags |= SA_FLAG_PROTECT_SUPP;
2431 bzero(&cpi, sizeof(cpi));
2432 xpt_setup_ccb(&cpi.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
2433 cpi.ccb_h.func_code = XPT_PATH_INQ;
2434 xpt_action((union ccb *)&cpi);
2437 * The SA driver supports a blocksize, but we don't know the
2438 * blocksize until we media is inserted. So, set a flag to
2439 * indicate that the blocksize is unavailable right now.
2441 cam_periph_unlock(periph);
2442 softc->device_stats = devstat_new_entry("sa", periph->unit_number, 0,
2443 DEVSTAT_BS_UNAVAILABLE, SID_TYPE(&cgd->inq_data) |
2444 XPORT_DEVSTAT_TYPE(cpi.transport), DEVSTAT_PRIORITY_TAPE);
2447 * Load the default value that is either compiled in, or loaded
2448 * in the global kern.cam.sa.allow_io_split tunable.
2450 softc->allow_io_split = sa_allow_io_split;
2453 * Load a per-instance tunable, if it exists. NOTE that this
2454 * tunable WILL GO AWAY in FreeBSD 11.0.
2456 snprintf(tmpstr, sizeof(tmpstr), "kern.cam.sa.%u.allow_io_split",
2457 periph->unit_number);
2458 TUNABLE_INT_FETCH(tmpstr, &softc->allow_io_split);
2461 * If maxio isn't set, we fall back to DFLTPHYS. Otherwise we take
2462 * the smaller of cpi.maxio or MAXPHYS.
2465 softc->maxio = DFLTPHYS;
2466 else if (cpi.maxio > MAXPHYS)
2467 softc->maxio = MAXPHYS;
2469 softc->maxio = cpi.maxio;
2472 * Record the controller's maximum I/O size so we can report it to
2475 softc->cpi_maxio = cpi.maxio;
2478 * By default we tell physio that we do not want our I/O split.
2479 * The user needs to have a 1:1 mapping between the size of his
2480 * write to a tape character device and the size of the write
2481 * that actually goes down to the drive.
2483 if (softc->allow_io_split == 0)
2484 softc->si_flags = SI_NOSPLIT;
2486 softc->si_flags = 0;
2488 TASK_INIT(&softc->sysctl_task, 0, sasysctlinit, periph);
2491 * If the SIM supports unmapped I/O, let physio know that we can
2492 * handle unmapped buffers.
2494 if (cpi.hba_misc & PIM_UNMAPPED)
2495 softc->si_flags |= SI_UNMAPPED;
2498 * Acquire a reference to the periph before we create the devfs
2499 * instances for it. We'll release this reference once the devfs
2500 * instances have been freed.
2502 if (cam_periph_acquire(periph) != CAM_REQ_CMP) {
2503 xpt_print(periph->path, "%s: lost periph during "
2504 "registration!\n", __func__);
2505 cam_periph_lock(periph);
2506 return (CAM_REQ_CMP_ERR);
2509 softc->devs.ctl_dev = make_dev(&sa_cdevsw, SAMINOR(SA_CTLDEV,
2510 SA_ATYPE_R), UID_ROOT, GID_OPERATOR,
2511 0660, "%s%d.ctl", periph->periph_name, periph->unit_number);
2512 sasetupdev(softc, softc->devs.ctl_dev);
2514 softc->devs.r_dev = make_dev(&sa_cdevsw, SAMINOR(SA_NOT_CTLDEV,
2515 SA_ATYPE_R), UID_ROOT, GID_OPERATOR,
2516 0660, "%s%d", periph->periph_name, periph->unit_number);
2517 sasetupdev(softc, softc->devs.r_dev);
2519 softc->devs.nr_dev = make_dev(&sa_cdevsw, SAMINOR(SA_NOT_CTLDEV,
2520 SA_ATYPE_NR), UID_ROOT, GID_OPERATOR,
2521 0660, "n%s%d", periph->periph_name, periph->unit_number);
2522 sasetupdev(softc, softc->devs.nr_dev);
2524 softc->devs.er_dev = make_dev(&sa_cdevsw, SAMINOR(SA_NOT_CTLDEV,
2525 SA_ATYPE_ER), UID_ROOT, GID_OPERATOR,
2526 0660, "e%s%d", periph->periph_name, periph->unit_number);
2527 sasetupdev(softc, softc->devs.er_dev);
2529 cam_periph_lock(periph);
2531 softc->density_type_bits[0] = 0;
2532 softc->density_type_bits[1] = SRDS_MEDIA;
2533 softc->density_type_bits[2] = SRDS_MEDIUM_TYPE;
2534 softc->density_type_bits[3] = SRDS_MEDIUM_TYPE | SRDS_MEDIA;
2536 * Bump the peripheral refcount for the sysctl thread, in case we
2537 * get invalidated before the thread has a chance to run.
2539 cam_periph_acquire(periph);
2540 taskqueue_enqueue(taskqueue_thread, &softc->sysctl_task);
2543 * Add an async callback so that we get
2544 * notified if this device goes away.
2546 xpt_register_async(AC_LOST_DEVICE, saasync, periph, periph->path);
2548 xpt_announce_periph(periph, NULL);
2549 xpt_announce_quirks(periph, softc->quirks, SA_QUIRK_BIT_STRING);
2551 return (CAM_REQ_CMP);
2555 sastart(struct cam_periph *periph, union ccb *start_ccb)
2557 struct sa_softc *softc;
2559 softc = (struct sa_softc *)periph->softc;
2561 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("sastart\n"));
2564 switch (softc->state) {
2565 case SA_STATE_NORMAL:
2567 /* Pull a buffer from the queue and get going on it */
2571 * See if there is a buf with work for us to do..
2573 bp = bioq_first(&softc->bio_queue);
2575 xpt_release_ccb(start_ccb);
2576 } else if ((softc->flags & SA_FLAG_ERR_PENDING) != 0) {
2577 struct bio *done_bp;
2579 softc->queue_count--;
2580 bioq_remove(&softc->bio_queue, bp);
2581 bp->bio_resid = bp->bio_bcount;
2583 if ((softc->flags & SA_FLAG_EOM_PENDING) != 0) {
2585 * We have two different behaviors for
2586 * writes when we hit either Early Warning
2587 * or the PEWZ (Programmable Early Warning
2588 * Zone). The default behavior is that
2589 * for all writes that are currently
2590 * queued after the write where we saw the
2591 * early warning, we will return the write
2592 * with the residual equal to the count.
2593 * i.e. tell the application that 0 bytes
2596 * The alternate behavior, which is enabled
2597 * when eot_warn is set, is that in
2598 * addition to setting the residual equal
2599 * to the count, we will set the error
2602 * In either case, once queued writes are
2603 * cleared out, we clear the error flag
2604 * (see below) and the application is free to
2605 * attempt to write more.
2607 if (softc->eot_warn != 0) {
2608 bp->bio_flags |= BIO_ERROR;
2609 bp->bio_error = ENOSPC;
2612 } else if ((softc->flags & SA_FLAG_EOF_PENDING) != 0) {
2614 * This can only happen if we're reading
2615 * in fixed length mode. In this case,
2616 * we dump the rest of the list the
2620 if (bioq_first(&softc->bio_queue) != NULL) {
2624 } else if ((softc->flags & SA_FLAG_EIO_PENDING) != 0) {
2625 bp->bio_error = EIO;
2626 bp->bio_flags |= BIO_ERROR;
2628 bp = bioq_first(&softc->bio_queue);
2630 * Only if we have no other buffers queued up
2631 * do we clear the pending error flag.
2634 softc->flags &= ~SA_FLAG_ERR_PENDING;
2635 CAM_DEBUG(periph->path, CAM_DEBUG_INFO,
2636 ("sastart- ERR_PENDING now 0x%x, bp is %sNULL, "
2637 "%d more buffers queued up\n",
2638 (softc->flags & SA_FLAG_ERR_PENDING),
2639 (bp != NULL)? "not " : " ", softc->queue_count));
2640 xpt_release_ccb(start_ccb);
2645 bioq_remove(&softc->bio_queue, bp);
2646 softc->queue_count--;
2648 length = bp->bio_bcount;
2650 if ((softc->flags & SA_FLAG_FIXED) != 0) {
2651 if (softc->blk_shift != 0) {
2652 length = length >> softc->blk_shift;
2653 } else if (softc->media_blksize != 0) {
2654 length = length / softc->media_blksize;
2656 bp->bio_error = EIO;
2657 xpt_print(periph->path, "zero blocksize"
2658 " for FIXED length writes?\n");
2663 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_INFO,
2664 ("issuing a %d fixed record %s\n",
2665 length, (bp->bio_cmd == BIO_READ)? "read" :
2670 CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_INFO,
2671 ("issuing a %d variable byte %s\n",
2672 length, (bp->bio_cmd == BIO_READ)? "read" :
2676 devstat_start_transaction_bio(softc->device_stats, bp);
2678 * Some people have theorized that we should
2679 * suppress illegal length indication if we are
2680 * running in variable block mode so that we don't
2681 * have to request sense every time our requested
2682 * block size is larger than the written block.
2683 * The residual information from the ccb allows
2684 * us to identify this situation anyway. The only
2685 * problem with this is that we will not get
2686 * information about blocks that are larger than
2687 * our read buffer unless we set the block size
2688 * in the mode page to something other than 0.
2690 * I believe that this is a non-issue. If user apps
2691 * don't adjust their read size to match our record
2692 * size, that's just life. Anyway, the typical usage
2693 * would be to issue, e.g., 64KB reads and occasionally
2694 * have to do deal with 512 byte or 1KB intermediate
2697 * That said, though, we now support setting the
2698 * SILI bit on reads, and we set the blocksize to 4
2699 * bytes when we do that. This gives us
2700 * compatibility with software that wants this,
2701 * although the only real difference between that
2702 * and not setting the SILI bit on reads is that we
2703 * won't get a check condition on reads where our
2704 * request size is larger than the block on tape.
2705 * That probably only makes a real difference in
2706 * non-packetized SCSI, where you have to go back
2707 * to the drive to request sense and thus incur
2710 softc->dsreg = (bp->bio_cmd == BIO_READ)?
2711 MTIO_DSREG_RD : MTIO_DSREG_WR;
2712 scsi_sa_read_write(&start_ccb->csio, 0, sadone,
2713 MSG_SIMPLE_Q_TAG, (bp->bio_cmd == BIO_READ ?
2714 SCSI_RW_READ : SCSI_RW_WRITE) |
2715 ((bp->bio_flags & BIO_UNMAPPED) != 0 ?
2716 SCSI_RW_BIO : 0), softc->sili,
2717 (softc->flags & SA_FLAG_FIXED) != 0, length,
2718 (bp->bio_flags & BIO_UNMAPPED) != 0 ? (void *)bp :
2719 bp->bio_data, bp->bio_bcount, SSD_FULL_SIZE,
2721 start_ccb->ccb_h.ccb_pflags &= ~SA_POSITION_UPDATED;
2722 start_ccb->ccb_h.ccb_bp = bp;
2723 bp = bioq_first(&softc->bio_queue);
2724 xpt_action(start_ccb);
2728 /* Have more work to do, so ensure we stay scheduled */
2729 xpt_schedule(periph, CAM_PRIORITY_NORMAL);
2733 case SA_STATE_ABNORMAL:
2735 panic("state 0x%x in sastart", softc->state);
2742 sadone(struct cam_periph *periph, union ccb *done_ccb)
2744 struct sa_softc *softc;
2745 struct ccb_scsiio *csio;
2749 softc = (struct sa_softc *)periph->softc;
2750 csio = &done_ccb->csio;
2752 softc->dsreg = MTIO_DSREG_REST;
2753 bp = (struct bio *)done_ccb->ccb_h.ccb_bp;
2755 if ((done_ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
2756 if ((error = saerror(done_ccb, 0, 0)) == ERESTART) {
2758 * A retry was scheduled, so just return.
2767 * Catastrophic error. Mark the tape as frozen
2768 * (we no longer know tape position).
2770 * Return all queued I/O with EIO, and unfreeze
2771 * our queue so that future transactions that
2772 * attempt to fix this problem can get to the
2777 softc->flags |= SA_FLAG_TAPE_FROZEN;
2778 bioq_flush(&softc->bio_queue, NULL, EIO);
2781 bp->bio_resid = bp->bio_bcount;
2782 bp->bio_error = error;
2783 bp->bio_flags |= BIO_ERROR;
2785 * In the error case, position is updated in saerror.
2788 bp->bio_resid = csio->resid;
2790 if (csio->resid != 0) {
2791 bp->bio_flags |= BIO_ERROR;
2793 if (bp->bio_cmd == BIO_WRITE) {
2794 softc->flags |= SA_FLAG_TAPE_WRITTEN;
2795 softc->filemarks = 0;
2797 if (!(csio->ccb_h.ccb_pflags & SA_POSITION_UPDATED) &&
2798 (softc->blkno != (daddr_t) -1)) {
2799 if ((softc->flags & SA_FLAG_FIXED) != 0) {
2801 if (softc->blk_shift != 0) {
2802 l = bp->bio_bcount >>
2805 l = bp->bio_bcount /
2806 softc->media_blksize;
2808 softc->blkno += (daddr_t) l;
2815 * If we had an error (immediate or pending),
2816 * release the device queue now.
2818 if (error || (softc->flags & SA_FLAG_ERR_PENDING))
2819 cam_release_devq(done_ccb->ccb_h.path, 0, 0, 0, 0);
2820 if (error || bp->bio_resid) {
2821 CAM_DEBUG(periph->path, CAM_DEBUG_INFO,
2822 ("error %d resid %ld count %ld\n", error,
2823 bp->bio_resid, bp->bio_bcount));
2825 biofinish(bp, softc->device_stats, 0);
2826 xpt_release_ccb(done_ccb);
2830 * Mount the tape (make sure it's ready for I/O).
2833 samount(struct cam_periph *periph, int oflags, struct cdev *dev)
2835 struct sa_softc *softc;
2840 * oflags can be checked for 'kind' of open (read-only check) - later
2841 * dev can be checked for a control-mode or compression open - later
2843 UNUSED_PARAMETER(oflags);
2844 UNUSED_PARAMETER(dev);
2847 softc = (struct sa_softc *)periph->softc;
2850 * This should determine if something has happend since the last
2851 * open/mount that would invalidate the mount. We do *not* want
2852 * to retry this command- we just want the status. But we only
2853 * do this if we're mounted already- if we're not mounted,
2854 * we don't care about the unit read state and can instead use
2855 * this opportunity to attempt to reserve the tape unit.
2858 if (softc->flags & SA_FLAG_TAPE_MOUNTED) {
2859 ccb = cam_periph_getccb(periph, 1);
2860 scsi_test_unit_ready(&ccb->csio, 0, sadone,
2861 MSG_SIMPLE_Q_TAG, SSD_FULL_SIZE, IO_TIMEOUT);
2862 error = cam_periph_runccb(ccb, saerror, 0, SF_NO_PRINT,
2863 softc->device_stats);
2864 if (error == ENXIO) {
2865 softc->flags &= ~SA_FLAG_TAPE_MOUNTED;
2866 scsi_test_unit_ready(&ccb->csio, 0, sadone,
2867 MSG_SIMPLE_Q_TAG, SSD_FULL_SIZE, IO_TIMEOUT);
2868 error = cam_periph_runccb(ccb, saerror, 0, SF_NO_PRINT,
2869 softc->device_stats);
2872 * We don't need to freeze the tape because we
2873 * will now attempt to rewind/load it.
2875 softc->flags &= ~SA_FLAG_TAPE_MOUNTED;
2876 if (CAM_DEBUGGED(periph->path, CAM_DEBUG_INFO)) {
2877 xpt_print(periph->path,
2878 "error %d on TUR in samount\n", error);
2882 error = sareservereleaseunit(periph, TRUE);
2886 ccb = cam_periph_getccb(periph, 1);
2887 scsi_test_unit_ready(&ccb->csio, 0, sadone,
2888 MSG_SIMPLE_Q_TAG, SSD_FULL_SIZE, IO_TIMEOUT);
2889 error = cam_periph_runccb(ccb, saerror, 0, SF_NO_PRINT,
2890 softc->device_stats);
2893 if ((softc->flags & SA_FLAG_TAPE_MOUNTED) == 0) {
2894 struct scsi_read_block_limits_data *rblim = NULL;
2895 int comp_enabled, comp_supported;
2896 u_int8_t write_protect, guessing = 0;
2899 * Clear out old state.
2901 softc->flags &= ~(SA_FLAG_TAPE_WP|SA_FLAG_TAPE_WRITTEN|
2902 SA_FLAG_ERR_PENDING|SA_FLAG_COMPRESSION);
2903 softc->filemarks = 0;
2906 * *Very* first off, make sure we're loaded to BOT.
2908 scsi_load_unload(&ccb->csio, 2, sadone, MSG_SIMPLE_Q_TAG, FALSE,
2909 FALSE, FALSE, 1, SSD_FULL_SIZE, REWIND_TIMEOUT);
2910 error = cam_periph_runccb(ccb, saerror, 0, SF_NO_PRINT,
2911 softc->device_stats);
2914 * In case this doesn't work, do a REWIND instead
2917 scsi_rewind(&ccb->csio, 2, sadone, MSG_SIMPLE_Q_TAG,
2918 FALSE, SSD_FULL_SIZE, REWIND_TIMEOUT);
2919 error = cam_periph_runccb(ccb, saerror, 0, SF_NO_PRINT,
2920 softc->device_stats);
2923 xpt_release_ccb(ccb);
2928 * Do a dummy test read to force access to the
2929 * media so that the drive will really know what's
2930 * there. We actually don't really care what the
2931 * blocksize on tape is and don't expect to really
2932 * read a full record.
2934 rblim = (struct scsi_read_block_limits_data *)
2935 malloc(8192, M_SCSISA, M_NOWAIT);
2936 if (rblim == NULL) {
2937 xpt_print(periph->path, "no memory for test read\n");
2938 xpt_release_ccb(ccb);
2943 if ((softc->quirks & SA_QUIRK_NODREAD) == 0) {
2944 scsi_sa_read_write(&ccb->csio, 0, sadone,
2945 MSG_SIMPLE_Q_TAG, 1, FALSE, 0, 8192,
2946 (void *) rblim, 8192, SSD_FULL_SIZE,
2948 (void) cam_periph_runccb(ccb, saerror, 0, SF_NO_PRINT,
2949 softc->device_stats);
2950 scsi_rewind(&ccb->csio, 1, sadone, MSG_SIMPLE_Q_TAG,
2951 FALSE, SSD_FULL_SIZE, REWIND_TIMEOUT);
2952 error = cam_periph_runccb(ccb, saerror, CAM_RETRY_SELTO,
2953 SF_NO_PRINT | SF_RETRY_UA,
2954 softc->device_stats);
2956 xpt_print(periph->path,
2957 "unable to rewind after test read\n");
2958 xpt_release_ccb(ccb);
2964 * Next off, determine block limits.
2966 scsi_read_block_limits(&ccb->csio, 5, sadone, MSG_SIMPLE_Q_TAG,
2967 rblim, SSD_FULL_SIZE, SCSIOP_TIMEOUT);
2969 error = cam_periph_runccb(ccb, saerror, CAM_RETRY_SELTO,
2970 SF_NO_PRINT | SF_RETRY_UA, softc->device_stats);
2972 xpt_release_ccb(ccb);
2976 * If it's less than SCSI-2, READ BLOCK LIMITS is not
2977 * a MANDATORY command. Anyway- it doesn't matter-
2978 * we can proceed anyway.
2980 softc->blk_gran = 0;
2981 softc->max_blk = ~0;
2984 if (softc->scsi_rev >= SCSI_REV_SPC) {
2985 softc->blk_gran = RBL_GRAN(rblim);
2987 softc->blk_gran = 0;
2990 * We take max_blk == min_blk to mean a default to
2991 * fixed mode- but note that whatever we get out of
2992 * sagetparams below will actually determine whether
2993 * we are actually *in* fixed mode.
2995 softc->max_blk = scsi_3btoul(rblim->maximum);
2996 softc->min_blk = scsi_2btoul(rblim->minimum);
3001 * Next, perform a mode sense to determine
3002 * current density, blocksize, compression etc.
3004 error = sagetparams(periph, SA_PARAM_ALL,
3005 &softc->media_blksize,
3006 &softc->media_density,
3007 &softc->media_numblks,
3008 &softc->buffer_mode, &write_protect,
3009 &softc->speed, &comp_supported,
3010 &comp_enabled, &softc->comp_algorithm,
3015 * We could work a little harder here. We could
3016 * adjust our attempts to get information. It
3017 * might be an ancient tape drive. If someone
3018 * nudges us, we'll do that.
3024 * If no quirk has determined that this is a device that is
3025 * preferred to be in fixed or variable mode, now is the time
3028 if ((softc->quirks & (SA_QUIRK_FIXED|SA_QUIRK_VARIABLE)) == 0) {
3031 * This could be expensive to find out. Luckily we
3032 * only need to do this once. If we start out in
3033 * 'default' mode, try and set ourselves to one
3034 * of the densities that would determine a wad
3035 * of other stuff. Go from highest to lowest.
3037 if (softc->media_density == SCSI_DEFAULT_DENSITY) {
3039 static u_int8_t ctry[] = {
3040 SCSI_DENSITY_HALFINCH_PE,
3041 SCSI_DENSITY_HALFINCH_6250C,
3042 SCSI_DENSITY_HALFINCH_6250,
3043 SCSI_DENSITY_HALFINCH_1600,
3044 SCSI_DENSITY_HALFINCH_800,
3045 SCSI_DENSITY_QIC_4GB,
3046 SCSI_DENSITY_QIC_2GB,
3047 SCSI_DENSITY_QIC_525_320,
3048 SCSI_DENSITY_QIC_150,
3049 SCSI_DENSITY_QIC_120,
3050 SCSI_DENSITY_QIC_24,
3051 SCSI_DENSITY_QIC_11_9TRK,
3052 SCSI_DENSITY_QIC_11_4TRK,
3053 SCSI_DENSITY_QIC_1320,
3054 SCSI_DENSITY_QIC_3080,
3057 for (i = 0; ctry[i]; i++) {
3058 error = sasetparams(periph,
3059 SA_PARAM_DENSITY, 0, ctry[i],
3062 softc->media_density = ctry[i];
3067 switch (softc->media_density) {
3068 case SCSI_DENSITY_QIC_11_4TRK:
3069 case SCSI_DENSITY_QIC_11_9TRK:
3070 case SCSI_DENSITY_QIC_24:
3071 case SCSI_DENSITY_QIC_120:
3072 case SCSI_DENSITY_QIC_150:
3073 case SCSI_DENSITY_QIC_525_320:
3074 case SCSI_DENSITY_QIC_1320:
3075 case SCSI_DENSITY_QIC_3080:
3076 softc->quirks &= ~SA_QUIRK_2FM;
3077 softc->quirks |= SA_QUIRK_FIXED|SA_QUIRK_1FM;
3078 softc->last_media_blksize = 512;
3080 case SCSI_DENSITY_QIC_4GB:
3081 case SCSI_DENSITY_QIC_2GB:
3082 softc->quirks &= ~SA_QUIRK_2FM;
3083 softc->quirks |= SA_QUIRK_FIXED|SA_QUIRK_1FM;
3084 softc->last_media_blksize = 1024;
3087 softc->last_media_blksize =
3088 softc->media_blksize;
3089 softc->quirks |= SA_QUIRK_VARIABLE;
3095 * If no quirk has determined that this is a device that needs
3096 * to have 2 Filemarks at EOD, now is the time to find out.
3099 if ((softc->quirks & SA_QUIRK_2FM) == 0) {
3100 switch (softc->media_density) {
3101 case SCSI_DENSITY_HALFINCH_800:
3102 case SCSI_DENSITY_HALFINCH_1600:
3103 case SCSI_DENSITY_HALFINCH_6250:
3104 case SCSI_DENSITY_HALFINCH_6250C:
3105 case SCSI_DENSITY_HALFINCH_PE:
3106 softc->quirks &= ~SA_QUIRK_1FM;
3107 softc->quirks |= SA_QUIRK_2FM;
3115 * Now validate that some info we got makes sense.
3117 if ((softc->max_blk < softc->media_blksize) ||
3118 (softc->min_blk > softc->media_blksize &&
3119 softc->media_blksize)) {
3120 xpt_print(periph->path,
3121 "BLOCK LIMITS (%d..%d) could not match current "
3122 "block settings (%d)- adjusting\n", softc->min_blk,
3123 softc->max_blk, softc->media_blksize);
3124 softc->max_blk = softc->min_blk =
3125 softc->media_blksize;
3129 * Now put ourselves into the right frame of mind based
3134 * If we want to be in FIXED mode and our current blocksize
3135 * is not equal to our last blocksize (if nonzero), try and
3136 * set ourselves to this last blocksize (as the 'preferred'
3137 * block size). The initial quirkmatch at registry sets the
3138 * initial 'last' blocksize. If, for whatever reason, this
3139 * 'last' blocksize is zero, set the blocksize to 512,
3140 * or min_blk if that's larger.
3142 if ((softc->quirks & SA_QUIRK_FIXED) &&
3143 (softc->quirks & SA_QUIRK_NO_MODESEL) == 0 &&
3144 (softc->media_blksize != softc->last_media_blksize)) {
3145 softc->media_blksize = softc->last_media_blksize;
3146 if (softc->media_blksize == 0) {
3147 softc->media_blksize = 512;
3148 if (softc->media_blksize < softc->min_blk) {
3149 softc->media_blksize = softc->min_blk;
3152 error = sasetparams(periph, SA_PARAM_BLOCKSIZE,
3153 softc->media_blksize, 0, 0, SF_NO_PRINT);
3155 xpt_print(periph->path,
3156 "unable to set fixed blocksize to %d\n",
3157 softc->media_blksize);
3162 if ((softc->quirks & SA_QUIRK_VARIABLE) &&
3163 (softc->media_blksize != 0)) {
3164 softc->last_media_blksize = softc->media_blksize;
3165 softc->media_blksize = 0;
3166 error = sasetparams(periph, SA_PARAM_BLOCKSIZE,
3167 0, 0, 0, SF_NO_PRINT);
3170 * If this fails and we were guessing, just
3171 * assume that we got it wrong and go try
3172 * fixed block mode. Don't even check against
3173 * density code at this point.
3176 softc->quirks &= ~SA_QUIRK_VARIABLE;
3177 softc->quirks |= SA_QUIRK_FIXED;
3178 if (softc->last_media_blksize == 0)
3179 softc->last_media_blksize = 512;
3182 xpt_print(periph->path,
3183 "unable to set variable blocksize\n");
3189 * Now that we have the current block size,
3190 * set up some parameters for sastart's usage.
3192 if (softc->media_blksize) {
3193 softc->flags |= SA_FLAG_FIXED;
3194 if (powerof2(softc->media_blksize)) {
3196 ffs(softc->media_blksize) - 1;
3197 softc->blk_mask = softc->media_blksize - 1;
3199 softc->blk_mask = ~0;
3200 softc->blk_shift = 0;
3204 * The SCSI-3 spec allows 0 to mean "unspecified".
3205 * The SCSI-1 spec allows 0 to mean 'infinite'.
3207 * Either works here.
3209 if (softc->max_blk == 0) {
3210 softc->max_blk = ~0;
3212 softc->blk_shift = 0;
3213 if (softc->blk_gran != 0) {
3214 softc->blk_mask = softc->blk_gran - 1;
3216 softc->blk_mask = 0;
3221 softc->flags |= SA_FLAG_TAPE_WP;
3223 if (comp_supported) {
3224 if (softc->saved_comp_algorithm == 0)
3225 softc->saved_comp_algorithm =
3226 softc->comp_algorithm;
3227 softc->flags |= SA_FLAG_COMP_SUPP;
3229 softc->flags |= SA_FLAG_COMP_ENABLED;
3231 softc->flags |= SA_FLAG_COMP_UNSUPP;
3233 if ((softc->buffer_mode == SMH_SA_BUF_MODE_NOBUF) &&
3234 (softc->quirks & SA_QUIRK_NO_MODESEL) == 0) {
3235 error = sasetparams(periph, SA_PARAM_BUFF_MODE, 0,
3238 softc->buffer_mode = SMH_SA_BUF_MODE_SIBUF;
3240 xpt_print(periph->path,
3241 "unable to set buffered mode\n");
3243 error = 0; /* not an error */
3248 softc->flags |= SA_FLAG_TAPE_MOUNTED;
3252 free(rblim, M_SCSISA);
3255 softc->dsreg = MTIO_DSREG_NIL;
3257 softc->fileno = softc->blkno = 0;
3258 softc->rep_fileno = softc->rep_blkno = -1;
3259 softc->partition = 0;
3260 softc->dsreg = MTIO_DSREG_REST;
3262 #ifdef SA_1FM_AT_EOD
3263 if ((softc->quirks & SA_QUIRK_2FM) == 0)
3264 softc->quirks |= SA_QUIRK_1FM;
3266 if ((softc->quirks & SA_QUIRK_1FM) == 0)
3267 softc->quirks |= SA_QUIRK_2FM;
3270 xpt_release_ccb(ccb);
3273 * If we return an error, we're not mounted any more,
3274 * so release any device reservation.
3277 (void) sareservereleaseunit(periph, FALSE);
3280 * Clear I/O residual.
3282 softc->last_io_resid = 0;
3283 softc->last_ctl_resid = 0;
3289 * How many filemarks do we need to write if we were to terminate the
3290 * tape session right now? Note that this can be a negative number
3294 samarkswanted(struct cam_periph *periph)
3297 struct sa_softc *softc;
3299 softc = (struct sa_softc *)periph->softc;
3301 if ((softc->flags & SA_FLAG_TAPE_WRITTEN) != 0) {
3303 if (softc->quirks & SA_QUIRK_2FM)
3306 markswanted -= softc->filemarks;
3307 return (markswanted);
3311 sacheckeod(struct cam_periph *periph)
3316 markswanted = samarkswanted(periph);
3318 if (markswanted > 0) {
3319 error = sawritefilemarks(periph, markswanted, FALSE, FALSE);
3327 saerror(union ccb *ccb, u_int32_t cflgs, u_int32_t sflgs)
3329 static const char *toobig =
3330 "%d-byte tape record bigger than supplied buffer\n";
3331 struct cam_periph *periph;
3332 struct sa_softc *softc;
3333 struct ccb_scsiio *csio;
3334 struct scsi_sense_data *sense;
3338 int error_code, sense_key, asc, ascq, error, aqvalid, stream_valid;
3340 uint8_t stream_bits;
3342 periph = xpt_path_periph(ccb->ccb_h.path);
3343 softc = (struct sa_softc *)periph->softc;
3345 sense = &csio->sense_data;
3346 sense_len = csio->sense_len - csio->sense_resid;
3347 scsi_extract_sense_len(sense, sense_len, &error_code, &sense_key,
3348 &asc, &ascq, /*show_errors*/ 1);
3349 if (asc != -1 && ascq != -1)
3353 if (scsi_get_stream_info(sense, sense_len, NULL, &stream_bits) == 0)
3359 status = csio->ccb_h.status & CAM_STATUS_MASK;
3362 * Calculate/latch up, any residuals... We do this in a funny 2-step
3363 * so we can print stuff here if we have CAM_DEBUG enabled for this
3366 if (status == CAM_SCSI_STATUS_ERROR) {
3367 if (scsi_get_sense_info(sense, sense_len, SSD_DESC_INFO, &resid,
3369 if ((softc->flags & SA_FLAG_FIXED) != 0)
3370 resid *= softc->media_blksize;
3372 resid = csio->dxfer_len;
3374 if ((softc->flags & SA_FLAG_FIXED) != 0) {
3375 if (softc->media_blksize)
3376 info /= softc->media_blksize;
3379 if (csio->cdb_io.cdb_bytes[0] == SA_READ ||
3380 csio->cdb_io.cdb_bytes[0] == SA_WRITE) {
3381 bcopy((caddr_t) sense, (caddr_t) &softc->last_io_sense,
3382 sizeof (struct scsi_sense_data));
3383 bcopy(csio->cdb_io.cdb_bytes, softc->last_io_cdb,
3384 (int) csio->cdb_len);
3385 softc->last_io_resid = resid;
3386 softc->last_resid_was_io = 1;
3388 bcopy((caddr_t) sense, (caddr_t) &softc->last_ctl_sense,
3389 sizeof (struct scsi_sense_data));
3390 bcopy(csio->cdb_io.cdb_bytes, softc->last_ctl_cdb,
3391 (int) csio->cdb_len);
3392 softc->last_ctl_resid = resid;
3393 softc->last_resid_was_io = 0;
3395 CAM_DEBUG(periph->path, CAM_DEBUG_INFO, ("CDB[0]=0x%x Key 0x%x "
3396 "ASC/ASCQ 0x%x/0x%x CAM STATUS 0x%x flags 0x%x resid %jd "
3397 "dxfer_len %d\n", csio->cdb_io.cdb_bytes[0] & 0xff,
3398 sense_key, asc, ascq, status,
3399 (stream_valid) ? stream_bits : 0, (intmax_t)resid,
3402 CAM_DEBUG(periph->path, CAM_DEBUG_INFO,
3403 ("Cam Status 0x%x\n", status));
3409 case CAM_SCSI_STATUS_ERROR:
3411 * If a read/write command, we handle it here.
3413 if (csio->cdb_io.cdb_bytes[0] == SA_READ ||
3414 csio->cdb_io.cdb_bytes[0] == SA_WRITE) {
3418 * If this was just EOM/EOP, Filemark, Setmark or ILI detected
3419 * on a non read/write command, we assume it's not an error
3420 * and propagate the residule and return.
3422 if ((aqvalid && asc == 0 && ascq > 0 && ascq <= 5) ||
3423 (aqvalid == 0 && sense_key == SSD_KEY_NO_SENSE)) {
3424 csio->resid = resid;
3429 * Otherwise, we let the common code handle this.
3431 return (cam_periph_error(ccb, cflgs, sflgs, &softc->saved_ccb));
3435 * We cannot depend upon CAM honoring retry counts for these.
3437 case CAM_SCSI_BUS_RESET:
3439 if (ccb->ccb_h.retry_count <= 0) {
3444 return (cam_periph_error(ccb, cflgs, sflgs, &softc->saved_ccb));
3448 * Handle filemark, end of tape, mismatched record sizes....
3449 * From this point out, we're only handling read/write cases.
3450 * Handle writes && reads differently.
3453 if (csio->cdb_io.cdb_bytes[0] == SA_WRITE) {
3454 if (sense_key == SSD_KEY_VOLUME_OVERFLOW) {
3455 csio->resid = resid;
3457 } else if ((stream_valid != 0) && (stream_bits & SSD_EOM)) {
3458 softc->flags |= SA_FLAG_EOM_PENDING;
3460 * Grotesque as it seems, the few times
3461 * I've actually seen a non-zero resid,
3462 * the tape drive actually lied and had
3463 * written all the data!.
3468 csio->resid = resid;
3469 if (sense_key == SSD_KEY_BLANK_CHECK) {
3470 if (softc->quirks & SA_QUIRK_1FM) {
3472 softc->flags |= SA_FLAG_EOM_PENDING;
3476 } else if ((stream_valid != 0) && (stream_bits & SSD_FILEMARK)){
3477 if (softc->flags & SA_FLAG_FIXED) {
3479 softc->flags |= SA_FLAG_EOF_PENDING;
3482 * Unconditionally, if we detected a filemark on a read,
3483 * mark that we've run moved a file ahead.
3485 if (softc->fileno != (daddr_t) -1) {
3488 csio->ccb_h.ccb_pflags |= SA_POSITION_UPDATED;
3494 * Incorrect Length usually applies to read, but can apply to writes.
3496 if (error == 0 && (stream_valid != 0) && (stream_bits & SSD_ILI)) {
3498 xpt_print(csio->ccb_h.path, toobig,
3499 csio->dxfer_len - info);
3500 csio->resid = csio->dxfer_len;
3503 csio->resid = resid;
3504 if (softc->flags & SA_FLAG_FIXED) {
3505 softc->flags |= SA_FLAG_EIO_PENDING;
3508 * Bump the block number if we hadn't seen a filemark.
3509 * Do this independent of errors (we've moved anyway).
3511 if ((stream_valid == 0) ||
3512 (stream_bits & SSD_FILEMARK) == 0) {
3513 if (softc->blkno != (daddr_t) -1) {
3515 csio->ccb_h.ccb_pflags |=
3516 SA_POSITION_UPDATED;
3524 * Unfreeze the queue if frozen as we're not returning anything
3525 * to our waiters that would indicate an I/O error has occurred
3535 sagetparams(struct cam_periph *periph, sa_params params_to_get,
3536 u_int32_t *blocksize, u_int8_t *density, u_int32_t *numblocks,
3537 int *buff_mode, u_int8_t *write_protect, u_int8_t *speed,
3538 int *comp_supported, int *comp_enabled, u_int32_t *comp_algorithm,
3539 sa_comp_t *tcs, struct scsi_control_data_prot_subpage *prot_page,
3540 int dp_size, int prot_changeable)
3544 struct scsi_mode_header_6 *mode_hdr;
3545 struct scsi_mode_blk_desc *mode_blk;
3546 int mode_buffer_len;
3547 struct sa_softc *softc;
3552 softc = (struct sa_softc *)periph->softc;
3553 ccb = cam_periph_getccb(periph, 1);
3554 if (softc->quirks & SA_QUIRK_NO_CPAGE)
3555 cpage = SA_DEVICE_CONFIGURATION_PAGE;
3557 cpage = SA_DATA_COMPRESSION_PAGE;
3560 mode_buffer_len = sizeof(*mode_hdr) + sizeof(*mode_blk);
3562 if (params_to_get & SA_PARAM_COMPRESSION) {
3563 if (softc->quirks & SA_QUIRK_NOCOMP) {
3564 *comp_supported = FALSE;
3565 params_to_get &= ~SA_PARAM_COMPRESSION;
3567 mode_buffer_len += sizeof (sa_comp_t);
3570 /* XXX Fix M_NOWAIT */
3571 mode_buffer = malloc(mode_buffer_len, M_SCSISA, M_NOWAIT | M_ZERO);
3572 if (mode_buffer == NULL) {
3573 xpt_release_ccb(ccb);
3576 mode_hdr = (struct scsi_mode_header_6 *)mode_buffer;
3577 mode_blk = (struct scsi_mode_blk_desc *)&mode_hdr[1];
3579 /* it is safe to retry this */
3580 scsi_mode_sense(&ccb->csio, 5, sadone, MSG_SIMPLE_Q_TAG, FALSE,
3581 SMS_PAGE_CTRL_CURRENT, (params_to_get & SA_PARAM_COMPRESSION) ?
3582 cpage : SMS_VENDOR_SPECIFIC_PAGE, mode_buffer, mode_buffer_len,
3583 SSD_FULL_SIZE, SCSIOP_TIMEOUT);
3585 error = cam_periph_runccb(ccb, saerror, 0, SF_NO_PRINT,
3586 softc->device_stats);
3588 status = ccb->ccb_h.status & CAM_STATUS_MASK;
3590 if (error == EINVAL && (params_to_get & SA_PARAM_COMPRESSION) != 0) {
3592 * Hmm. Let's see if we can try another page...
3593 * If we've already done that, give up on compression
3594 * for this device and remember this for the future
3595 * and attempt the request without asking for compression
3598 if (cpage == SA_DATA_COMPRESSION_PAGE) {
3599 cpage = SA_DEVICE_CONFIGURATION_PAGE;
3602 softc->quirks |= SA_QUIRK_NOCOMP;
3603 free(mode_buffer, M_SCSISA);
3605 } else if (status == CAM_SCSI_STATUS_ERROR) {
3606 /* Tell the user about the fatal error. */
3607 scsi_sense_print(&ccb->csio);
3608 goto sagetparamsexit;
3612 * If the user only wants the compression information, and
3613 * the device doesn't send back the block descriptor, it's
3614 * no big deal. If the user wants more than just
3615 * compression, though, and the device doesn't pass back the
3616 * block descriptor, we need to send another mode sense to
3617 * get the block descriptor.
3619 if ((mode_hdr->blk_desc_len == 0) &&
3620 (params_to_get & SA_PARAM_COMPRESSION) &&
3621 (params_to_get & ~(SA_PARAM_COMPRESSION))) {
3624 * Decrease the mode buffer length by the size of
3625 * the compression page, to make sure the data
3626 * there doesn't get overwritten.
3628 mode_buffer_len -= sizeof (sa_comp_t);
3631 * Now move the compression page that we presumably
3632 * got back down the memory chunk a little bit so
3633 * it doesn't get spammed.
3635 bcopy(&mode_hdr[0], &mode_hdr[1], sizeof (sa_comp_t));
3636 bzero(&mode_hdr[0], sizeof (mode_hdr[0]));
3639 * Now, we issue another mode sense and just ask
3640 * for the block descriptor, etc.
3643 scsi_mode_sense(&ccb->csio, 2, sadone, MSG_SIMPLE_Q_TAG, FALSE,
3644 SMS_PAGE_CTRL_CURRENT, SMS_VENDOR_SPECIFIC_PAGE,
3645 mode_buffer, mode_buffer_len, SSD_FULL_SIZE,
3648 error = cam_periph_runccb(ccb, saerror, 0, SF_NO_PRINT,
3649 softc->device_stats);
3652 goto sagetparamsexit;
3655 if (params_to_get & SA_PARAM_BLOCKSIZE)
3656 *blocksize = scsi_3btoul(mode_blk->blklen);
3658 if (params_to_get & SA_PARAM_NUMBLOCKS)
3659 *numblocks = scsi_3btoul(mode_blk->nblocks);
3661 if (params_to_get & SA_PARAM_BUFF_MODE)
3662 *buff_mode = mode_hdr->dev_spec & SMH_SA_BUF_MODE_MASK;
3664 if (params_to_get & SA_PARAM_DENSITY)
3665 *density = mode_blk->density;
3667 if (params_to_get & SA_PARAM_WP)
3668 *write_protect = (mode_hdr->dev_spec & SMH_SA_WP)? TRUE : FALSE;
3670 if (params_to_get & SA_PARAM_SPEED)
3671 *speed = mode_hdr->dev_spec & SMH_SA_SPEED_MASK;
3673 if (params_to_get & SA_PARAM_COMPRESSION) {
3674 sa_comp_t *ntcs = (sa_comp_t *) &mode_blk[1];
3675 if (cpage == SA_DATA_COMPRESSION_PAGE) {
3676 struct scsi_data_compression_page *cp = &ntcs->dcomp;
3678 (cp->dce_and_dcc & SA_DCP_DCC)? TRUE : FALSE;
3680 (cp->dce_and_dcc & SA_DCP_DCE)? TRUE : FALSE;
3681 *comp_algorithm = scsi_4btoul(cp->comp_algorithm);
3683 struct scsi_dev_conf_page *cp = &ntcs->dconf;
3685 * We don't really know whether this device supports
3686 * Data Compression if the algorithm field is
3687 * zero. Just say we do.
3689 *comp_supported = TRUE;
3691 (cp->sel_comp_alg != SA_COMP_NONE)? TRUE : FALSE;
3692 *comp_algorithm = cp->sel_comp_alg;
3695 bcopy(ntcs, tcs, sizeof (sa_comp_t));
3698 if ((params_to_get & SA_PARAM_DENSITY_EXT)
3699 && (softc->scsi_rev >= SCSI_REV_SPC)) {
3702 for (i = 0; i < SA_DENSITY_TYPES; i++) {
3703 scsi_report_density_support(&ccb->csio,
3706 /*tag_action*/ MSG_SIMPLE_Q_TAG,
3707 /*media*/ softc->density_type_bits[i] & SRDS_MEDIA,
3708 /*medium_type*/ softc->density_type_bits[i] &
3710 /*data_ptr*/ softc->density_info[i],
3711 /*length*/ sizeof(softc->density_info[i]),
3712 /*sense_len*/ SSD_FULL_SIZE,
3713 /*timeout*/ REP_DENSITY_TIMEOUT);
3714 error = cam_periph_runccb(ccb, saerror, 0, SF_NO_PRINT,
3715 softc->device_stats);
3716 status = ccb->ccb_h.status & CAM_STATUS_MASK;
3719 * Some tape drives won't support this command at
3720 * all, but hopefully we'll minimize that with the
3721 * check for SPC or greater support above. If they
3722 * don't support the default report (neither the
3723 * MEDIA or MEDIUM_TYPE bits set), then there is
3724 * really no point in continuing on to look for
3728 || (status != CAM_REQ_CMP)) {
3730 softc->density_info_valid[i] = 0;
3731 if (softc->density_type_bits[i] == 0)
3736 softc->density_info_valid[i] = ccb->csio.dxfer_len -
3742 * Get logical block protection parameters if the drive supports it.
3744 if ((params_to_get & SA_PARAM_LBP)
3745 && (softc->flags & SA_FLAG_PROTECT_SUPP)) {
3746 struct scsi_mode_header_10 *mode10_hdr;
3747 struct scsi_control_data_prot_subpage *dp_page;
3748 struct scsi_mode_sense_10 *cdb;
3749 struct sa_prot_state *prot;
3750 int dp_len, returned_len;
3753 dp_size = sizeof(*dp_page);
3755 dp_len = sizeof(*mode10_hdr) + dp_size;
3756 mode10_hdr = malloc(dp_len, M_SCSISA, M_NOWAIT | M_ZERO);
3757 if (mode10_hdr == NULL) {
3759 goto sagetparamsexit;
3762 scsi_mode_sense_len(&ccb->csio,
3765 /*tag_action*/ MSG_SIMPLE_Q_TAG,
3767 /*page_code*/ (prot_changeable == 0) ?
3768 SMS_PAGE_CTRL_CURRENT :
3769 SMS_PAGE_CTRL_CHANGEABLE,
3770 /*page*/ SMS_CONTROL_MODE_PAGE,
3771 /*param_buf*/ (uint8_t *)mode10_hdr,
3772 /*param_len*/ dp_len,
3773 /*minimum_cmd_size*/ 10,
3774 /*sense_len*/ SSD_FULL_SIZE,
3775 /*timeout*/ SCSIOP_TIMEOUT);
3777 * XXX KDM we need to be able to set the subpage in the
3780 cdb = (struct scsi_mode_sense_10 *)ccb->csio.cdb_io.cdb_bytes;
3781 cdb->subpage = SA_CTRL_DP_SUBPAGE_CODE;
3783 error = cam_periph_runccb(ccb, saerror, 0, SF_NO_PRINT,
3784 softc->device_stats);
3786 free(mode10_hdr, M_SCSISA);
3787 goto sagetparamsexit;
3790 status = ccb->ccb_h.status & CAM_STATUS_MASK;
3791 if (status != CAM_REQ_CMP) {
3793 free(mode10_hdr, M_SCSISA);
3794 goto sagetparamsexit;
3798 * The returned data length at least has to be long enough
3799 * for us to look at length in the mode page header.
3801 returned_len = ccb->csio.dxfer_len - ccb->csio.resid;
3802 if (returned_len < sizeof(mode10_hdr->data_length)) {
3804 free(mode10_hdr, M_SCSISA);
3805 goto sagetparamsexit;
3808 returned_len = min(returned_len,
3809 sizeof(mode10_hdr->data_length) +
3810 scsi_2btoul(mode10_hdr->data_length));
3812 dp_page = (struct scsi_control_data_prot_subpage *)
3816 * We also have to have enough data to include the prot_bits
3819 if (returned_len < (sizeof(*mode10_hdr) +
3820 __offsetof(struct scsi_control_data_prot_subpage, prot_bits)
3821 + sizeof(dp_page->prot_bits))) {
3823 free(mode10_hdr, M_SCSISA);
3824 goto sagetparamsexit;
3827 prot = &softc->prot_info.cur_prot_state;
3828 prot->prot_method = dp_page->prot_method;
3829 prot->pi_length = dp_page->pi_length &
3830 SA_CTRL_DP_PI_LENGTH_MASK;
3831 prot->lbp_w = (dp_page->prot_bits & SA_CTRL_DP_LBP_W) ? 1 :0;
3832 prot->lbp_r = (dp_page->prot_bits & SA_CTRL_DP_LBP_R) ? 1 :0;
3833 prot->rbdp = (dp_page->prot_bits & SA_CTRL_DP_RBDP) ? 1 :0;
3834 prot->initialized = 1;
3836 if (prot_page != NULL)
3837 bcopy(dp_page, prot_page, min(sizeof(*prot_page),
3840 free(mode10_hdr, M_SCSISA);
3843 if (CAM_DEBUGGED(periph->path, CAM_DEBUG_INFO)) {
3845 char *xyz = mode_buffer;
3846 xpt_print_path(periph->path);
3847 printf("Mode Sense Data=");
3848 for (idx = 0; idx < mode_buffer_len; idx++)
3849 printf(" 0x%02x", xyz[idx] & 0xff);
3855 xpt_release_ccb(ccb);
3856 free(mode_buffer, M_SCSISA);
3861 * Set protection information to the pending protection information stored
3865 sasetprot(struct cam_periph *periph, struct sa_prot_state *new_prot)
3867 struct sa_softc *softc;
3868 struct scsi_control_data_prot_subpage *dp_page, *dp_changeable;
3869 struct scsi_mode_header_10 *mode10_hdr, *mode10_changeable;
3871 uint8_t current_speed;
3872 size_t dp_size, dp_page_length;
3873 int dp_len, buff_mode;
3876 softc = (struct sa_softc *)periph->softc;
3878 mode10_changeable = NULL;
3882 * Start off with the size set to the actual length of the page
3883 * that we have defined.
3885 dp_size = sizeof(*dp_changeable);
3886 dp_page_length = dp_size -
3887 __offsetof(struct scsi_control_data_prot_subpage, prot_method);
3891 dp_len = sizeof(*mode10_changeable) + dp_size;
3892 mode10_changeable = malloc(dp_len, M_SCSISA, M_NOWAIT | M_ZERO);
3893 if (mode10_changeable == NULL) {
3899 (struct scsi_control_data_prot_subpage *)&mode10_changeable[1];
3902 * First get the data protection page changeable parameters mask.
3903 * We need to know which parameters the drive supports changing.
3904 * We also need to know what the drive claims that its page length
3905 * is. The reason is that IBM drives in particular are very picky
3906 * about the page length. They want it (the length set in the
3907 * page structure itself) to be 28 bytes, and they want the
3908 * parameter list length specified in the mode select header to be
3909 * 40 bytes. So, to work with IBM drives as well as any other tape
3910 * drive, find out what the drive claims the page length is, and
3911 * make sure that we match that.
3913 error = sagetparams(periph, SA_PARAM_SPEED | SA_PARAM_LBP,
3914 NULL, NULL, NULL, &buff_mode, NULL, ¤t_speed, NULL, NULL,
3915 NULL, NULL, dp_changeable, dp_size, /*prot_changeable*/ 1);
3919 if (scsi_2btoul(dp_changeable->length) > dp_page_length) {
3920 dp_page_length = scsi_2btoul(dp_changeable->length);
3921 dp_size = dp_page_length +
3922 __offsetof(struct scsi_control_data_prot_subpage,
3924 free(mode10_changeable, M_SCSISA);
3925 mode10_changeable = NULL;
3929 mode10_hdr = malloc(dp_len, M_SCSISA, M_NOWAIT | M_ZERO);
3930 if (mode10_hdr == NULL) {
3935 dp_page = (struct scsi_control_data_prot_subpage *)&mode10_hdr[1];
3938 * Now grab the actual current settings in the page.
3940 error = sagetparams(periph, SA_PARAM_SPEED | SA_PARAM_LBP,
3941 NULL, NULL, NULL, &buff_mode, NULL, ¤t_speed, NULL, NULL,
3942 NULL, NULL, dp_page, dp_size, /*prot_changeable*/ 0);
3946 /* These two fields need to be 0 for MODE SELECT */
3947 scsi_ulto2b(0, mode10_hdr->data_length);
3948 mode10_hdr->medium_type = 0;
3949 /* We are not including a block descriptor */
3950 scsi_ulto2b(0, mode10_hdr->blk_desc_len);
3952 mode10_hdr->dev_spec = current_speed;
3953 /* if set, set single-initiator buffering mode */
3954 if (softc->buffer_mode == SMH_SA_BUF_MODE_SIBUF) {
3955 mode10_hdr->dev_spec |= SMH_SA_BUF_MODE_SIBUF;
3959 * For each field, make sure that the drive allows changing it
3960 * before bringing in the user's setting.
3962 if (dp_changeable->prot_method != 0)
3963 dp_page->prot_method = new_prot->prot_method;
3965 if (dp_changeable->pi_length & SA_CTRL_DP_PI_LENGTH_MASK) {
3966 dp_page->pi_length &= ~SA_CTRL_DP_PI_LENGTH_MASK;
3967 dp_page->pi_length |= (new_prot->pi_length &
3968 SA_CTRL_DP_PI_LENGTH_MASK);
3970 if (dp_changeable->prot_bits & SA_CTRL_DP_LBP_W) {
3971 if (new_prot->lbp_w)
3972 dp_page->prot_bits |= SA_CTRL_DP_LBP_W;
3974 dp_page->prot_bits &= ~SA_CTRL_DP_LBP_W;
3977 if (dp_changeable->prot_bits & SA_CTRL_DP_LBP_R) {
3978 if (new_prot->lbp_r)
3979 dp_page->prot_bits |= SA_CTRL_DP_LBP_R;
3981 dp_page->prot_bits &= ~SA_CTRL_DP_LBP_R;
3984 if (dp_changeable->prot_bits & SA_CTRL_DP_RBDP) {
3986 dp_page->prot_bits |= SA_CTRL_DP_RBDP;
3988 dp_page->prot_bits &= ~SA_CTRL_DP_RBDP;
3991 ccb = cam_periph_getccb(periph, 1);
3993 scsi_mode_select_len(&ccb->csio,
3996 /*tag_action*/ MSG_SIMPLE_Q_TAG,
3997 /*scsi_page_fmt*/ TRUE,
3998 /*save_pages*/ FALSE,
3999 /*param_buf*/ (uint8_t *)mode10_hdr,
4000 /*param_len*/ dp_len,
4001 /*minimum_cmd_size*/ 10,
4002 /*sense_len*/ SSD_FULL_SIZE,
4003 /*timeout*/ SCSIOP_TIMEOUT);
4005 error = cam_periph_runccb(ccb, saerror, 0, 0, softc->device_stats);
4009 if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
4015 * The operation was successful. We could just copy the settings
4016 * the user requested, but just in case the drive ignored some of
4017 * our settings, let's ask for status again.
4019 error = sagetparams(periph, SA_PARAM_SPEED | SA_PARAM_LBP,
4020 NULL, NULL, NULL, &buff_mode, NULL, ¤t_speed, NULL, NULL,
4021 NULL, NULL, dp_page, dp_size, 0);
4025 xpt_release_ccb(ccb);
4026 free(mode10_hdr, M_SCSISA);
4027 free(mode10_changeable, M_SCSISA);
4032 * The purpose of this function is to set one of four different parameters
4036 * - compression / compression algorithm
4039 * The assumption is that this will be called from saioctl(), and therefore
4040 * from a process context. Thus the waiting malloc calls below. If that
4041 * assumption ever changes, the malloc calls should be changed to be
4044 * Any or all of the four parameters may be set when this function is
4045 * called. It should handle setting more than one parameter at once.
4048 sasetparams(struct cam_periph *periph, sa_params params_to_set,
4049 u_int32_t blocksize, u_int8_t density, u_int32_t calg,
4050 u_int32_t sense_flags)
4052 struct sa_softc *softc;
4053 u_int32_t current_blocksize;
4054 u_int32_t current_calg;
4055 u_int8_t current_density;
4056 u_int8_t current_speed;
4057 int comp_enabled, comp_supported;
4059 int mode_buffer_len;
4060 struct scsi_mode_header_6 *mode_hdr;
4061 struct scsi_mode_blk_desc *mode_blk;
4062 sa_comp_t *ccomp, *cpage;
4064 union ccb *ccb = NULL;
4067 softc = (struct sa_softc *)periph->softc;
4069 ccomp = malloc(sizeof (sa_comp_t), M_SCSISA, M_NOWAIT);
4074 * Since it doesn't make sense to set the number of blocks, or
4075 * write protection, we won't try to get the current value. We
4076 * always want to get the blocksize, so we can set it back to the
4079 error = sagetparams(periph,
4080 params_to_set | SA_PARAM_BLOCKSIZE | SA_PARAM_SPEED,
4081 ¤t_blocksize, ¤t_density, NULL, &buff_mode, NULL,
4082 ¤t_speed, &comp_supported, &comp_enabled,
4083 ¤t_calg, ccomp, NULL, 0, 0);
4086 free(ccomp, M_SCSISA);
4090 mode_buffer_len = sizeof(*mode_hdr) + sizeof(*mode_blk);
4091 if (params_to_set & SA_PARAM_COMPRESSION)
4092 mode_buffer_len += sizeof (sa_comp_t);
4094 mode_buffer = malloc(mode_buffer_len, M_SCSISA, M_NOWAIT | M_ZERO);
4095 if (mode_buffer == NULL) {
4096 free(ccomp, M_SCSISA);
4100 mode_hdr = (struct scsi_mode_header_6 *)mode_buffer;
4101 mode_blk = (struct scsi_mode_blk_desc *)&mode_hdr[1];
4103 ccb = cam_periph_getccb(periph, 1);
4107 if (params_to_set & SA_PARAM_COMPRESSION) {
4109 cpage = (sa_comp_t *)&mode_blk[1];
4111 cpage = (sa_comp_t *)&mode_hdr[1];
4113 bcopy(ccomp, cpage, sizeof (sa_comp_t));
4114 cpage->hdr.pagecode &= ~0x80;
4119 * If the caller wants us to set the blocksize, use the one they
4120 * pass in. Otherwise, use the blocksize we got back from the
4121 * mode select above.
4124 if (params_to_set & SA_PARAM_BLOCKSIZE)
4125 scsi_ulto3b(blocksize, mode_blk->blklen);
4127 scsi_ulto3b(current_blocksize, mode_blk->blklen);
4130 * Set density if requested, else preserve old density.
4131 * SCSI_SAME_DENSITY only applies to SCSI-2 or better
4132 * devices, else density we've latched up in our softc.
4134 if (params_to_set & SA_PARAM_DENSITY) {
4135 mode_blk->density = density;
4136 } else if (softc->scsi_rev > SCSI_REV_CCS) {
4137 mode_blk->density = SCSI_SAME_DENSITY;
4139 mode_blk->density = softc->media_density;
4144 * For mode selects, these two fields must be zero.
4146 mode_hdr->data_length = 0;
4147 mode_hdr->medium_type = 0;
4149 /* set the speed to the current value */
4150 mode_hdr->dev_spec = current_speed;
4152 /* if set, set single-initiator buffering mode */
4153 if (softc->buffer_mode == SMH_SA_BUF_MODE_SIBUF) {
4154 mode_hdr->dev_spec |= SMH_SA_BUF_MODE_SIBUF;
4158 mode_hdr->blk_desc_len = sizeof(struct scsi_mode_blk_desc);
4160 mode_hdr->blk_desc_len = 0;
4163 * First, if the user wants us to set the compression algorithm or
4164 * just turn compression on, check to make sure that this drive
4165 * supports compression.
4167 if (params_to_set & SA_PARAM_COMPRESSION) {
4169 * If the compression algorithm is 0, disable compression.
4170 * If the compression algorithm is non-zero, enable
4171 * compression and set the compression type to the
4172 * specified compression algorithm, unless the algorithm is
4173 * MT_COMP_ENABLE. In that case, we look at the
4174 * compression algorithm that is currently set and if it is
4175 * non-zero, we leave it as-is. If it is zero, and we have
4176 * saved a compression algorithm from a time when
4177 * compression was enabled before, set the compression to
4180 switch (ccomp->hdr.pagecode & ~0x80) {
4181 case SA_DEVICE_CONFIGURATION_PAGE:
4183 struct scsi_dev_conf_page *dcp = &cpage->dconf;
4185 dcp->sel_comp_alg = SA_COMP_NONE;
4188 if (calg != MT_COMP_ENABLE) {
4189 dcp->sel_comp_alg = calg;
4190 } else if (dcp->sel_comp_alg == SA_COMP_NONE &&
4191 softc->saved_comp_algorithm != 0) {
4192 dcp->sel_comp_alg = softc->saved_comp_algorithm;
4196 case SA_DATA_COMPRESSION_PAGE:
4197 if (ccomp->dcomp.dce_and_dcc & SA_DCP_DCC) {
4198 struct scsi_data_compression_page *dcp = &cpage->dcomp;
4201 * Disable compression, but leave the
4202 * decompression and the capability bit
4205 dcp->dce_and_dcc = SA_DCP_DCC;
4206 dcp->dde_and_red |= SA_DCP_DDE;
4209 /* enable compression && decompression */
4210 dcp->dce_and_dcc = SA_DCP_DCE | SA_DCP_DCC;
4211 dcp->dde_and_red |= SA_DCP_DDE;
4213 * If there, use compression algorithm from caller.
4214 * Otherwise, if there's a saved compression algorithm
4215 * and there is no current algorithm, use the saved
4216 * algorithm. Else parrot back what we got and hope
4219 if (calg != MT_COMP_ENABLE) {
4220 scsi_ulto4b(calg, dcp->comp_algorithm);
4221 scsi_ulto4b(calg, dcp->decomp_algorithm);
4222 } else if (scsi_4btoul(dcp->comp_algorithm) == 0 &&
4223 softc->saved_comp_algorithm != 0) {
4224 scsi_ulto4b(softc->saved_comp_algorithm,
4225 dcp->comp_algorithm);
4226 scsi_ulto4b(softc->saved_comp_algorithm,
4227 dcp->decomp_algorithm);
4232 * Compression does not appear to be supported-
4233 * at least via the DATA COMPRESSION page. It
4234 * would be too much to ask us to believe that
4235 * the page itself is supported, but incorrectly
4236 * reports an ability to manipulate data compression,
4237 * so we'll assume that this device doesn't support
4238 * compression. We can just fall through for that.
4243 * The drive doesn't seem to support compression,
4244 * so turn off the set compression bit.
4246 params_to_set &= ~SA_PARAM_COMPRESSION;
4247 xpt_print(periph->path,
4248 "device does not seem to support compression\n");
4251 * If that was the only thing the user wanted us to set,
4252 * clean up allocated resources and return with
4253 * 'operation not supported'.
4255 if (params_to_set == SA_PARAM_NONE) {
4256 free(mode_buffer, M_SCSISA);
4257 xpt_release_ccb(ccb);
4262 * That wasn't the only thing the user wanted us to set.
4263 * So, decrease the stated mode buffer length by the
4264 * size of the compression mode page.
4266 mode_buffer_len -= sizeof(sa_comp_t);
4270 /* It is safe to retry this operation */
4271 scsi_mode_select(&ccb->csio, 5, sadone, MSG_SIMPLE_Q_TAG,
4272 (params_to_set & SA_PARAM_COMPRESSION)? TRUE : FALSE,
4273 FALSE, mode_buffer, mode_buffer_len, SSD_FULL_SIZE, SCSIOP_TIMEOUT);
4275 error = cam_periph_runccb(ccb, saerror, 0,
4276 sense_flags, softc->device_stats);
4278 if (CAM_DEBUGGED(periph->path, CAM_DEBUG_INFO)) {
4280 char *xyz = mode_buffer;
4281 xpt_print_path(periph->path);
4282 printf("Err%d, Mode Select Data=", error);
4283 for (idx = 0; idx < mode_buffer_len; idx++)
4284 printf(" 0x%02x", xyz[idx] & 0xff);
4291 * If we can, try without setting density/blocksize.
4294 if ((params_to_set &
4295 (SA_PARAM_DENSITY|SA_PARAM_BLOCKSIZE)) == 0) {
4300 mode_blk = (struct scsi_mode_blk_desc *)&mode_hdr[1];
4301 cpage = (sa_comp_t *)&mode_blk[1];
4305 * If we were setting the blocksize, and that failed, we
4306 * want to set it to its original value. If we weren't
4307 * setting the blocksize, we don't want to change it.
4309 scsi_ulto3b(current_blocksize, mode_blk->blklen);
4312 * Set density if requested, else preserve old density.
4313 * SCSI_SAME_DENSITY only applies to SCSI-2 or better
4314 * devices, else density we've latched up in our softc.
4316 if (params_to_set & SA_PARAM_DENSITY) {
4317 mode_blk->density = current_density;
4318 } else if (softc->scsi_rev > SCSI_REV_CCS) {
4319 mode_blk->density = SCSI_SAME_DENSITY;
4321 mode_blk->density = softc->media_density;
4324 if (params_to_set & SA_PARAM_COMPRESSION)
4325 bcopy(ccomp, cpage, sizeof (sa_comp_t));
4328 * The retry count is the only CCB field that might have been
4329 * changed that we care about, so reset it back to 1.
4331 ccb->ccb_h.retry_count = 1;
4332 cam_periph_runccb(ccb, saerror, 0, sense_flags,
4333 softc->device_stats);
4336 xpt_release_ccb(ccb);
4339 free(ccomp, M_SCSISA);
4341 if (params_to_set & SA_PARAM_COMPRESSION) {
4343 softc->flags &= ~SA_FLAG_COMP_ENABLED;
4345 * Even if we get an error setting compression,
4346 * do not say that we don't support it. We could
4347 * have been wrong, or it may be media specific.
4348 * softc->flags &= ~SA_FLAG_COMP_SUPP;
4350 softc->saved_comp_algorithm = softc->comp_algorithm;
4351 softc->comp_algorithm = 0;
4353 softc->flags |= SA_FLAG_COMP_ENABLED;
4354 softc->comp_algorithm = calg;
4358 free(mode_buffer, M_SCSISA);
4363 saextget(struct cdev *dev, struct cam_periph *periph, struct sbuf *sb,
4368 struct sa_softc *softc;
4371 struct ccb_getdev cgd;
4373 softc = (struct sa_softc *)periph->softc;
4377 error = sagetparams_common(dev, periph);
4379 goto extget_bailout;
4380 if (!SA_IS_CTRL(dev) && !softc->open_pending_mount)
4384 SASBADDNODE(sb, indent, mtextget);
4386 * Basic CAM peripheral information.
4388 SASBADDVARSTR(sb, indent, periph->periph_name, %s, periph_name,
4389 strlen(periph->periph_name) + 1);
4390 SASBADDUINT(sb, indent, periph->unit_number, %u, unit_number);
4391 xpt_setup_ccb(&cgd.ccb_h,
4393 CAM_PRIORITY_NORMAL);
4394 cgd.ccb_h.func_code = XPT_GDEV_TYPE;
4395 xpt_action((union ccb *)&cgd);
4396 if ((cgd.ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
4397 g->status = MT_EXT_GET_ERROR;
4398 snprintf(g->error_str, sizeof(g->error_str),
4399 "Error %#x returned for XPT_GDEV_TYPE CCB",
4401 goto extget_bailout;
4404 cam_strvis(tmpstr, cgd.inq_data.vendor,
4405 sizeof(cgd.inq_data.vendor), sizeof(tmpstr));
4406 SASBADDVARSTRDESC(sb, indent, tmpstr, %s, vendor,
4407 sizeof(cgd.inq_data.vendor) + 1, "SCSI Vendor ID");
4409 cam_strvis(tmpstr, cgd.inq_data.product,
4410 sizeof(cgd.inq_data.product), sizeof(tmpstr));
4411 SASBADDVARSTRDESC(sb, indent, tmpstr, %s, product,
4412 sizeof(cgd.inq_data.product) + 1, "SCSI Product ID");
4414 cam_strvis(tmpstr, cgd.inq_data.revision,
4415 sizeof(cgd.inq_data.revision), sizeof(tmpstr));
4416 SASBADDVARSTRDESC(sb, indent, tmpstr, %s, revision,
4417 sizeof(cgd.inq_data.revision) + 1, "SCSI Revision");
4419 if (cgd.serial_num_len > 0) {
4426 if (cgd.serial_num_len > sizeof(tmpstr)) {
4427 ts2_len = cgd.serial_num_len + 1;
4429 tmpstr2 = malloc(ts2_len, M_SCSISA, M_WAITOK | M_ZERO);
4431 ts2_len = sizeof(tmpstr);
4436 cam_strvis(tmpstr2, cgd.serial_num, cgd.serial_num_len,
4439 SASBADDVARSTRDESC(sb, indent, tmpstr2, %s, serial_num,
4440 (ssize_t)cgd.serial_num_len + 1, "Serial Number");
4441 if (ts2_malloc != 0)
4442 free(tmpstr2, M_SCSISA);
4445 * We return a serial_num element in any case, but it will
4446 * be empty if the device has no serial number.
4449 SASBADDVARSTRDESC(sb, indent, tmpstr, %s, serial_num,
4450 (ssize_t)0, "Serial Number");
4453 SASBADDUINTDESC(sb, indent, softc->maxio, %u, maxio,
4454 "Maximum I/O size allowed by driver and controller");
4456 SASBADDUINTDESC(sb, indent, softc->cpi_maxio, %u, cpi_maxio,
4457 "Maximum I/O size reported by controller");
4459 SASBADDUINTDESC(sb, indent, softc->max_blk, %u, max_blk,
4460 "Maximum block size supported by tape drive and media");
4462 SASBADDUINTDESC(sb, indent, softc->min_blk, %u, min_blk,
4463 "Minimum block size supported by tape drive and media");
4465 SASBADDUINTDESC(sb, indent, softc->blk_gran, %u, blk_gran,
4466 "Block granularity supported by tape drive and media");
4468 maxio_tmp = min(softc->max_blk, softc->maxio);
4470 SASBADDUINTDESC(sb, indent, maxio_tmp, %u, max_effective_iosize,
4471 "Maximum possible I/O size");
4473 SASBADDINTDESC(sb, indent, softc->flags & SA_FLAG_FIXED ? 1 : 0, %d,
4474 fixed_mode, "Set to 1 for fixed block mode, 0 for variable block");
4477 * XXX KDM include SIM, bus, target, LUN?
4479 if (softc->flags & SA_FLAG_COMP_UNSUPP)
4483 SASBADDINTDESC(sb, indent, tmpint, %d, compression_supported,
4484 "Set to 1 if compression is supported, 0 if not");
4485 if (softc->flags & SA_FLAG_COMP_ENABLED)
4489 SASBADDINTDESC(sb, indent, tmpint, %d, compression_enabled,
4490 "Set to 1 if compression is enabled, 0 if not");
4491 SASBADDUINTDESC(sb, indent, softc->comp_algorithm, %u,
4492 compression_algorithm, "Numeric compression algorithm");
4494 safillprot(softc, &indent, sb);
4496 SASBADDUINTDESC(sb, indent, softc->media_blksize, %u,
4497 media_blocksize, "Block size reported by drive or set by user");
4498 SASBADDINTDESC(sb, indent, (intmax_t)softc->fileno, %jd,
4499 calculated_fileno, "Calculated file number, -1 if unknown");
4500 SASBADDINTDESC(sb, indent, (intmax_t)softc->blkno, %jd,
4501 calculated_rel_blkno, "Calculated block number relative to file, "
4502 "set to -1 if unknown");
4503 SASBADDINTDESC(sb, indent, (intmax_t)softc->rep_fileno, %jd,
4504 reported_fileno, "File number reported by drive, -1 if unknown");
4505 SASBADDINTDESC(sb, indent, (intmax_t)softc->rep_blkno, %jd,
4506 reported_blkno, "Block number relative to BOP/BOT reported by "
4507 "drive, -1 if unknown");
4508 SASBADDINTDESC(sb, indent, (intmax_t)softc->partition, %jd,
4509 partition, "Current partition number, 0 is the default");
4510 SASBADDINTDESC(sb, indent, softc->bop, %d, bop,
4511 "Set to 1 if drive is at the beginning of partition/tape, 0 if "
4512 "not, -1 if unknown");
4513 SASBADDINTDESC(sb, indent, softc->eop, %d, eop,
4514 "Set to 1 if drive is past early warning, 0 if not, -1 if unknown");
4515 SASBADDINTDESC(sb, indent, softc->bpew, %d, bpew,
4516 "Set to 1 if drive is past programmable early warning, 0 if not, "
4518 SASBADDINTDESC(sb, indent, (intmax_t)softc->last_io_resid, %jd,
4519 residual, "Residual for the last I/O");
4521 * XXX KDM should we send a string with the current driver
4522 * status already decoded instead of a numeric value?
4524 SASBADDINTDESC(sb, indent, softc->dsreg, %d, dsreg,
4525 "Current state of the driver");
4527 safilldensitysb(softc, &indent, sb);
4529 SASBENDNODE(sb, indent, mtextget);
4537 saparamget(struct sa_softc *softc, struct sbuf *sb)
4542 SASBADDNODE(sb, indent, mtparamget);
4543 SASBADDINTDESC(sb, indent, softc->sili, %d, sili,
4544 "Suppress an error on underlength variable reads");
4545 SASBADDINTDESC(sb, indent, softc->eot_warn, %d, eot_warn,
4546 "Return an error to warn that end of tape is approaching");
4547 safillprot(softc, &indent, sb);
4548 SASBENDNODE(sb, indent, mtparamget);
4554 saprevent(struct cam_periph *periph, int action)
4556 struct sa_softc *softc;
4560 softc = (struct sa_softc *)periph->softc;
4562 if ((action == PR_ALLOW) && (softc->flags & SA_FLAG_TAPE_LOCKED) == 0)
4564 if ((action == PR_PREVENT) && (softc->flags & SA_FLAG_TAPE_LOCKED) != 0)
4568 * We can be quiet about illegal requests.
4570 if (CAM_DEBUGGED(periph->path, CAM_DEBUG_INFO)) {
4575 ccb = cam_periph_getccb(periph, 1);
4577 /* It is safe to retry this operation */
4578 scsi_prevent(&ccb->csio, 5, sadone, MSG_SIMPLE_Q_TAG, action,
4579 SSD_FULL_SIZE, SCSIOP_TIMEOUT);
4581 error = cam_periph_runccb(ccb, saerror, 0, sf, softc->device_stats);
4583 if (action == PR_ALLOW)
4584 softc->flags &= ~SA_FLAG_TAPE_LOCKED;
4586 softc->flags |= SA_FLAG_TAPE_LOCKED;
4589 xpt_release_ccb(ccb);
4593 sarewind(struct cam_periph *periph)
4596 struct sa_softc *softc;
4599 softc = (struct sa_softc *)periph->softc;
4601 ccb = cam_periph_getccb(periph, 1);
4603 /* It is safe to retry this operation */
4604 scsi_rewind(&ccb->csio, 2, sadone, MSG_SIMPLE_Q_TAG, FALSE,
4605 SSD_FULL_SIZE, REWIND_TIMEOUT);
4607 softc->dsreg = MTIO_DSREG_REW;
4608 error = cam_periph_runccb(ccb, saerror, 0, 0, softc->device_stats);
4609 softc->dsreg = MTIO_DSREG_REST;
4611 xpt_release_ccb(ccb);
4613 softc->partition = softc->fileno = softc->blkno = (daddr_t) 0;
4614 softc->rep_fileno = softc->rep_blkno = (daddr_t) 0;
4616 softc->fileno = softc->blkno = (daddr_t) -1;
4617 softc->partition = (daddr_t) -1;
4618 softc->rep_fileno = softc->rep_blkno = (daddr_t) -1;
4624 saspace(struct cam_periph *periph, int count, scsi_space_code code)
4627 struct sa_softc *softc;
4630 softc = (struct sa_softc *)periph->softc;
4632 ccb = cam_periph_getccb(periph, 1);
4634 /* This cannot be retried */
4636 scsi_space(&ccb->csio, 0, sadone, MSG_SIMPLE_Q_TAG, code, count,
4637 SSD_FULL_SIZE, SPACE_TIMEOUT);
4640 * Clear residual because we will be using it.
4642 softc->last_ctl_resid = 0;
4644 softc->dsreg = (count < 0)? MTIO_DSREG_REV : MTIO_DSREG_FWD;
4645 error = cam_periph_runccb(ccb, saerror, 0, 0, softc->device_stats);
4646 softc->dsreg = MTIO_DSREG_REST;
4648 xpt_release_ccb(ccb);
4651 * If a spacing operation has failed, we need to invalidate
4654 * If the spacing operation was setmarks or to end of recorded data,
4655 * we no longer know our relative position.
4657 * If the spacing operations was spacing files in reverse, we
4658 * take account of the residual, but still check against less
4659 * than zero- if we've gone negative, we must have hit BOT.
4661 * If the spacing operations was spacing records in reverse and
4662 * we have a residual, we've either hit BOT or hit a filemark.
4663 * In the former case, we know our new record number (0). In
4664 * the latter case, we have absolutely no idea what the real
4665 * record number is- we've stopped between the end of the last
4666 * record in the previous file and the filemark that stopped
4667 * our spacing backwards.
4670 softc->fileno = softc->blkno = (daddr_t) -1;
4671 softc->rep_blkno = softc->partition = (daddr_t) -1;
4672 softc->rep_fileno = (daddr_t) -1;
4673 } else if (code == SS_SETMARKS || code == SS_EOD) {
4674 softc->fileno = softc->blkno = (daddr_t) -1;
4675 } else if (code == SS_FILEMARKS && softc->fileno != (daddr_t) -1) {
4676 softc->fileno += (count - softc->last_ctl_resid);
4677 if (softc->fileno < 0) /* we must of hit BOT */
4680 } else if (code == SS_BLOCKS && softc->blkno != (daddr_t) -1) {
4681 softc->blkno += (count - softc->last_ctl_resid);
4683 if (softc->last_ctl_resid || softc->blkno < 0) {
4684 if (softc->fileno == 0) {
4687 softc->blkno = (daddr_t) -1;
4699 sawritefilemarks(struct cam_periph *periph, int nmarks, int setmarks, int immed)
4702 struct sa_softc *softc;
4705 softc = (struct sa_softc *)periph->softc;
4706 if (softc->open_rdonly)
4709 ccb = cam_periph_getccb(periph, 1);
4711 * Clear residual because we will be using it.
4713 softc->last_ctl_resid = 0;
4715 softc->dsreg = MTIO_DSREG_FMK;
4716 /* this *must* not be retried */
4717 scsi_write_filemarks(&ccb->csio, 0, sadone, MSG_SIMPLE_Q_TAG,
4718 immed, setmarks, nmarks, SSD_FULL_SIZE, IO_TIMEOUT);
4719 softc->dsreg = MTIO_DSREG_REST;
4722 error = cam_periph_runccb(ccb, saerror, 0, 0, softc->device_stats);
4724 if (error == 0 && nmarks) {
4725 struct sa_softc *softc = (struct sa_softc *)periph->softc;
4726 nwm = nmarks - softc->last_ctl_resid;
4727 softc->filemarks += nwm;
4730 xpt_release_ccb(ccb);
4733 * Update relative positions (if we're doing that).
4736 softc->fileno = softc->blkno = softc->partition = (daddr_t) -1;
4737 } else if (softc->fileno != (daddr_t) -1) {
4738 softc->fileno += nwm;
4743 * Ask the tape drive for position information.
4748 * If we got valid position information, since we just wrote a file
4749 * mark, we know we're at the file mark and block 0 after that
4752 if (softc->rep_fileno != (daddr_t) -1) {
4753 softc->fileno = softc->rep_fileno;
4761 sagetpos(struct cam_periph *periph)
4764 struct scsi_tape_position_long_data long_pos;
4765 struct sa_softc *softc = (struct sa_softc *)periph->softc;
4768 if (softc->quirks & SA_QUIRK_NO_LONG_POS) {
4769 softc->rep_fileno = (daddr_t) -1;
4770 softc->rep_blkno = (daddr_t) -1;
4771 softc->bop = softc->eop = softc->bpew = -1;
4772 return (EOPNOTSUPP);
4775 bzero(&long_pos, sizeof(long_pos));
4777 ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL);
4778 scsi_read_position_10(&ccb->csio,
4781 /*tag_action*/ MSG_SIMPLE_Q_TAG,
4782 /*service_action*/ SA_RPOS_LONG_FORM,
4783 /*data_ptr*/ (uint8_t *)&long_pos,
4784 /*length*/ sizeof(long_pos),
4785 /*sense_len*/ SSD_FULL_SIZE,
4786 /*timeout*/ SCSIOP_TIMEOUT);
4788 softc->dsreg = MTIO_DSREG_RBSY;
4789 error = cam_periph_runccb(ccb, saerror, 0, SF_QUIET_IR,
4790 softc->device_stats);
4791 softc->dsreg = MTIO_DSREG_REST;
4794 if (long_pos.flags & SA_RPOS_LONG_MPU) {
4796 * If the drive doesn't know what file mark it is
4797 * on, our calculated filemark isn't going to be
4800 softc->fileno = (daddr_t) -1;
4801 softc->rep_fileno = (daddr_t) -1;
4803 softc->fileno = softc->rep_fileno =
4804 scsi_8btou64(long_pos.logical_file_num);
4807 if (long_pos.flags & SA_RPOS_LONG_LONU) {
4808 softc->partition = (daddr_t) -1;
4809 softc->rep_blkno = (daddr_t) -1;
4811 * If the tape drive doesn't know its block
4812 * position, we can't claim to know it either.
4814 softc->blkno = (daddr_t) -1;
4816 softc->partition = scsi_4btoul(long_pos.partition);
4818 scsi_8btou64(long_pos.logical_object_num);
4820 if (long_pos.flags & SA_RPOS_LONG_BOP)
4825 if (long_pos.flags & SA_RPOS_LONG_EOP)
4830 if (long_pos.flags & SA_RPOS_LONG_BPEW)
4834 } else if (error == EINVAL) {
4836 * If this drive returned an invalid-request type error,
4837 * then it likely doesn't support the long form report.
4839 softc->quirks |= SA_QUIRK_NO_LONG_POS;
4843 softc->rep_fileno = softc->rep_blkno = (daddr_t) -1;
4844 softc->partition = (daddr_t) -1;
4845 softc->bop = softc->eop = softc->bpew = -1;
4848 xpt_release_ccb(ccb);
4854 sardpos(struct cam_periph *periph, int hard, u_int32_t *blkptr)
4856 struct scsi_tape_position_data loc;
4858 struct sa_softc *softc = (struct sa_softc *)periph->softc;
4862 * We try and flush any buffered writes here if we were writing
4863 * and we're trying to get hardware block position. It eats
4864 * up performance substantially, but I'm wary of drive firmware.
4866 * I think that *logical* block position is probably okay-
4867 * but hardware block position might have to wait for data
4868 * to hit media to be valid. Caveat Emptor.
4871 if (hard && (softc->flags & SA_FLAG_TAPE_WRITTEN)) {
4872 error = sawritefilemarks(periph, 0, 0, 0);
4873 if (error && error != EACCES)
4877 ccb = cam_periph_getccb(periph, 1);
4878 scsi_read_position(&ccb->csio, 1, sadone, MSG_SIMPLE_Q_TAG,
4879 hard, &loc, SSD_FULL_SIZE, SCSIOP_TIMEOUT);
4880 softc->dsreg = MTIO_DSREG_RBSY;
4881 error = cam_periph_runccb(ccb, saerror, 0, 0, softc->device_stats);
4882 softc->dsreg = MTIO_DSREG_REST;
4885 if (loc.flags & SA_RPOS_UNCERTAIN) {
4886 error = EINVAL; /* nothing is certain */
4888 *blkptr = scsi_4btoul(loc.firstblk);
4892 xpt_release_ccb(ccb);
4897 sasetpos(struct cam_periph *periph, int hard, struct mtlocate *locate_info)
4900 struct sa_softc *softc;
4906 * We used to try and flush any buffered writes here.
4907 * Now we push this onto user applications to either
4908 * flush the pending writes themselves (via a zero count
4909 * WRITE FILEMARKS command) or they can trust their tape
4910 * drive to do this correctly for them.
4913 softc = (struct sa_softc *)periph->softc;
4914 ccb = cam_periph_getccb(periph, 1);
4916 cp = locate_info->flags & MT_LOCATE_FLAG_CHANGE_PART ? 1 : 0;
4917 immed = locate_info->flags & MT_LOCATE_FLAG_IMMED ? 1 : 0;
4920 * Determine whether we have to use LOCATE or LOCATE16. The hard
4921 * bit is only possible with LOCATE, but the new ioctls do not
4922 * allow setting that bit. So we can't get into the situation of
4923 * having the hard bit set with a block address that is larger than
4928 else if ((locate_info->dest_type != MT_LOCATE_DEST_OBJECT)
4929 || (locate_info->block_address_mode != MT_LOCATE_BAM_IMPLICIT)
4930 || (locate_info->logical_id > SA_SPOS_MAX_BLK))
4935 if (locate16 != 0) {
4936 scsi_locate_16(&ccb->csio,
4939 /*tag_action*/ MSG_SIMPLE_Q_TAG,
4942 /*dest_type*/ locate_info->dest_type,
4943 /*bam*/ locate_info->block_address_mode,
4944 /*partition*/ locate_info->partition,
4945 /*logical_id*/ locate_info->logical_id,
4946 /*sense_len*/ SSD_FULL_SIZE,
4947 /*timeout*/ SPACE_TIMEOUT);
4949 uint32_t blk_pointer;
4951 blk_pointer = locate_info->logical_id;
4953 scsi_locate_10(&ccb->csio,
4956 /*tag_action*/ MSG_SIMPLE_Q_TAG,
4960 /*partition*/ locate_info->partition,
4961 /*block_address*/ locate_info->logical_id,
4962 /*sense_len*/ SSD_FULL_SIZE,
4963 /*timeout*/ SPACE_TIMEOUT);
4966 softc->dsreg = MTIO_DSREG_POS;
4967 error = cam_periph_runccb(ccb, saerror, 0, 0, softc->device_stats);
4968 softc->dsreg = MTIO_DSREG_REST;
4969 xpt_release_ccb(ccb);
4972 * We assume the calculated file and block numbers are unknown
4973 * unless we have enough information to populate them.
4975 softc->fileno = softc->blkno = (daddr_t) -1;
4978 * If the user requested changing the partition and the request
4979 * succeeded, note the partition.
4983 softc->partition = locate_info->partition;
4985 softc->partition = (daddr_t) -1;
4988 switch (locate_info->dest_type) {
4989 case MT_LOCATE_DEST_FILE:
4991 * This is the only case where we can reliably
4992 * calculate the file and block numbers.
4994 softc->fileno = locate_info->logical_id;
4997 case MT_LOCATE_DEST_OBJECT:
4998 case MT_LOCATE_DEST_SET:
4999 case MT_LOCATE_DEST_EOD:
5006 * Ask the drive for current position information.
5014 saretension(struct cam_periph *periph)
5017 struct sa_softc *softc;
5020 softc = (struct sa_softc *)periph->softc;
5022 ccb = cam_periph_getccb(periph, 1);
5024 /* It is safe to retry this operation */
5025 scsi_load_unload(&ccb->csio, 5, sadone, MSG_SIMPLE_Q_TAG, FALSE,
5026 FALSE, TRUE, TRUE, SSD_FULL_SIZE, ERASE_TIMEOUT);
5028 softc->dsreg = MTIO_DSREG_TEN;
5029 error = cam_periph_runccb(ccb, saerror, 0, 0, softc->device_stats);
5030 softc->dsreg = MTIO_DSREG_REST;
5032 xpt_release_ccb(ccb);
5034 softc->partition = softc->fileno = softc->blkno = (daddr_t) 0;
5037 softc->partition = softc->fileno = softc->blkno = (daddr_t) -1;
5042 sareservereleaseunit(struct cam_periph *periph, int reserve)
5045 struct sa_softc *softc;
5048 softc = (struct sa_softc *)periph->softc;
5049 ccb = cam_periph_getccb(periph, 1);
5051 /* It is safe to retry this operation */
5052 scsi_reserve_release_unit(&ccb->csio, 2, sadone, MSG_SIMPLE_Q_TAG,
5053 FALSE, 0, SSD_FULL_SIZE, SCSIOP_TIMEOUT, reserve);
5054 softc->dsreg = MTIO_DSREG_RBSY;
5055 error = cam_periph_runccb(ccb, saerror, 0,
5056 SF_RETRY_UA | SF_NO_PRINT, softc->device_stats);
5057 softc->dsreg = MTIO_DSREG_REST;
5058 xpt_release_ccb(ccb);
5061 * If the error was Illegal Request, then the device doesn't support
5062 * RESERVE/RELEASE. This is not an error.
5064 if (error == EINVAL) {
5072 saloadunload(struct cam_periph *periph, int load)
5075 struct sa_softc *softc;
5078 softc = (struct sa_softc *)periph->softc;
5080 ccb = cam_periph_getccb(periph, 1);
5082 /* It is safe to retry this operation */
5083 scsi_load_unload(&ccb->csio, 5, sadone, MSG_SIMPLE_Q_TAG, FALSE,
5084 FALSE, FALSE, load, SSD_FULL_SIZE, REWIND_TIMEOUT);
5086 softc->dsreg = (load)? MTIO_DSREG_LD : MTIO_DSREG_UNL;
5087 error = cam_periph_runccb(ccb, saerror, 0, 0, softc->device_stats);
5088 softc->dsreg = MTIO_DSREG_REST;
5089 xpt_release_ccb(ccb);
5091 if (error || load == 0) {
5092 softc->partition = softc->fileno = softc->blkno = (daddr_t) -1;
5093 softc->rep_fileno = softc->rep_blkno = (daddr_t) -1;
5094 } else if (error == 0) {
5095 softc->partition = softc->fileno = softc->blkno = (daddr_t) 0;
5102 saerase(struct cam_periph *periph, int longerase)
5106 struct sa_softc *softc;
5109 softc = (struct sa_softc *)periph->softc;
5110 if (softc->open_rdonly)
5113 ccb = cam_periph_getccb(periph, 1);
5115 scsi_erase(&ccb->csio, 1, sadone, MSG_SIMPLE_Q_TAG, FALSE, longerase,
5116 SSD_FULL_SIZE, ERASE_TIMEOUT);
5118 softc->dsreg = MTIO_DSREG_ZER;
5119 error = cam_periph_runccb(ccb, saerror, 0, 0, softc->device_stats);
5120 softc->dsreg = MTIO_DSREG_REST;
5122 xpt_release_ccb(ccb);
5127 * Fill an sbuf with density data in XML format. This particular macro
5128 * works for multi-byte integer fields.
5130 * Note that 1 byte fields aren't supported here. The reason is that the
5131 * compiler does not evaluate the sizeof(), and assumes that any of the
5132 * sizes are possible for a given field. So passing in a multi-byte
5133 * field will result in a warning that the assignment makes an integer
5134 * from a pointer without a cast, if there is an assignment in the 1 byte
5137 #define SAFILLDENSSB(dens_data, sb, indent, field, desc_remain, \
5138 len_to_go, cur_offset, desc){ \
5139 size_t cur_field_len; \
5141 cur_field_len = sizeof(dens_data->field); \
5142 if (desc_remain < cur_field_len) { \
5143 len_to_go -= desc_remain; \
5144 cur_offset += desc_remain; \
5147 len_to_go -= cur_field_len; \
5148 cur_offset += cur_field_len; \
5149 desc_remain -= cur_field_len; \
5151 switch (sizeof(dens_data->field)) { \
5153 KASSERT(1 == 0, ("Programmer error, invalid 1 byte " \
5154 "field width for SAFILLDENSFIELD")); \
5157 SASBADDUINTDESC(sb, indent, \
5158 scsi_2btoul(dens_data->field), %u, field, desc); \
5161 SASBADDUINTDESC(sb, indent, \
5162 scsi_3btoul(dens_data->field), %u, field, desc); \
5165 SASBADDUINTDESC(sb, indent, \
5166 scsi_4btoul(dens_data->field), %u, field, desc); \
5169 SASBADDUINTDESC(sb, indent, \
5170 (uintmax_t)scsi_8btou64(dens_data->field), %ju, \
5178 * Fill an sbuf with density data in XML format. This particular macro
5179 * works for strings.
5181 #define SAFILLDENSSBSTR(dens_data, sb, indent, field, desc_remain, \
5182 len_to_go, cur_offset, desc){ \
5183 size_t cur_field_len; \
5186 cur_field_len = sizeof(dens_data->field); \
5187 if (desc_remain < cur_field_len) { \
5188 len_to_go -= desc_remain; \
5189 cur_offset += desc_remain; \
5192 len_to_go -= cur_field_len; \
5193 cur_offset += cur_field_len; \
5194 desc_remain -= cur_field_len; \
5196 cam_strvis(tmpstr, dens_data->field, \
5197 sizeof(dens_data->field), sizeof(tmpstr)); \
5198 SASBADDVARSTRDESC(sb, indent, tmpstr, %s, field, \
5199 strlen(tmpstr) + 1, desc); \
5203 * Fill an sbuf with density data descriptors.
5206 safilldenstypesb(struct sbuf *sb, int *indent, uint8_t *buf, int buf_len,
5209 struct scsi_density_hdr *hdr;
5211 int len_to_go, cur_offset;
5213 int num_reports, need_close;
5216 * We need at least the header length. Note that this isn't an
5217 * error, not all tape drives will have every data type.
5219 if (buf_len < sizeof(*hdr))
5223 hdr = (struct scsi_density_hdr *)buf;
5224 hdr_len = scsi_2btoul(hdr->length);
5225 len_to_go = min(buf_len - sizeof(*hdr), hdr_len);
5227 length_offset = __offsetof(struct scsi_density_data,
5230 length_offset = __offsetof(struct scsi_medium_type_data,
5233 cur_offset = sizeof(*hdr);
5238 while (len_to_go > length_offset) {
5239 struct scsi_density_data *dens_data;
5240 struct scsi_medium_type_data *type_data;
5242 size_t cur_field_len;
5248 dens_data =(struct scsi_density_data *)&buf[cur_offset];
5249 if (dens_data->byte2 & SDD_DLV)
5250 desc_remain = scsi_2btoul(dens_data->length);
5252 desc_remain = SDD_DEFAULT_LENGTH -
5255 type_data = (struct scsi_medium_type_data *)
5257 desc_remain = scsi_2btoul(type_data->length);
5260 len_to_go -= length_offset;
5261 desc_remain = min(desc_remain, len_to_go);
5262 cur_offset += length_offset;
5264 if (need_close != 0) {
5265 SASBENDNODE(sb, *indent, density_entry);
5268 SASBADDNODENUM(sb, *indent, density_entry, num_reports);
5273 SASBADDUINTDESC(sb, *indent,
5274 dens_data->primary_density_code, %u,
5275 primary_density_code, "Primary Density Code");
5276 SASBADDUINTDESC(sb, *indent,
5277 dens_data->secondary_density_code, %u,
5278 secondary_density_code, "Secondary Density Code");
5279 SASBADDUINTDESC(sb, *indent,
5280 dens_data->byte2 & ~SDD_DLV, %#x, density_flags,
5283 SAFILLDENSSB(dens_data, sb, *indent, bits_per_mm,
5284 desc_remain, len_to_go, cur_offset, "Bits per mm");
5285 SAFILLDENSSB(dens_data, sb, *indent, media_width,
5286 desc_remain, len_to_go, cur_offset, "Media width");
5287 SAFILLDENSSB(dens_data, sb, *indent, tracks,
5288 desc_remain, len_to_go, cur_offset,
5289 "Number of Tracks");
5290 SAFILLDENSSB(dens_data, sb, *indent, capacity,
5291 desc_remain, len_to_go, cur_offset, "Capacity");
5293 SAFILLDENSSBSTR(dens_data, sb, *indent, assigning_org,
5294 desc_remain, len_to_go, cur_offset,
5295 "Assigning Organization");
5297 SAFILLDENSSBSTR(dens_data, sb, *indent, density_name,
5298 desc_remain, len_to_go, cur_offset, "Density Name");
5300 SAFILLDENSSBSTR(dens_data, sb, *indent, description,
5301 desc_remain, len_to_go, cur_offset, "Description");
5305 SASBADDUINTDESC(sb, *indent, type_data->medium_type,
5306 %u, medium_type, "Medium Type");
5309 __offsetof(struct scsi_medium_type_data,
5311 __offsetof(struct scsi_medium_type_data,
5314 if (desc_remain < cur_field_len) {
5315 len_to_go -= desc_remain;
5316 cur_offset += desc_remain;
5319 len_to_go -= cur_field_len;
5320 cur_offset += cur_field_len;
5321 desc_remain -= cur_field_len;
5323 SASBADDINTDESC(sb, *indent,
5324 type_data->num_density_codes, %d,
5325 num_density_codes, "Number of Density Codes");
5326 SASBADDNODE(sb, *indent, density_code_list);
5327 for (i = 0; i < type_data->num_density_codes;
5329 SASBADDUINTDESC(sb, *indent,
5330 type_data->primary_density_codes[i], %u,
5331 density_code, "Density Code");
5333 SASBENDNODE(sb, *indent, density_code_list);
5335 SAFILLDENSSB(type_data, sb, *indent, media_width,
5336 desc_remain, len_to_go, cur_offset,
5338 SAFILLDENSSB(type_data, sb, *indent, medium_length,
5339 desc_remain, len_to_go, cur_offset,
5343 * Account for the two reserved bytes.
5345 cur_field_len = sizeof(type_data->reserved2);
5346 if (desc_remain < cur_field_len) {
5347 len_to_go -= desc_remain;
5348 cur_offset += desc_remain;
5351 len_to_go -= cur_field_len;
5352 cur_offset += cur_field_len;
5353 desc_remain -= cur_field_len;
5355 SAFILLDENSSBSTR(type_data, sb, *indent, assigning_org,
5356 desc_remain, len_to_go, cur_offset,
5357 "Assigning Organization");
5358 SAFILLDENSSBSTR(type_data, sb, *indent,
5359 medium_type_name, desc_remain, len_to_go,
5360 cur_offset, "Medium type name");
5361 SAFILLDENSSBSTR(type_data, sb, *indent, description,
5362 desc_remain, len_to_go, cur_offset, "Description");
5366 if (need_close != 0) {
5367 SASBENDNODE(sb, *indent, density_entry);
5375 * Fill an sbuf with density data information
5378 safilldensitysb(struct sa_softc *softc, int *indent, struct sbuf *sb)
5382 SASBADDNODE(sb, *indent, mtdensity);
5383 SASBADDUINTDESC(sb, *indent, softc->media_density, %u, media_density,
5384 "Current Medium Density");
5386 for (i = 0; i < SA_DENSITY_TYPES; i++) {
5389 if (softc->density_info_valid[i] == 0)
5392 SASBADDNODE(sb, *indent, density_report);
5393 if (softc->density_type_bits[i] & SRDS_MEDIUM_TYPE) {
5400 SASBADDINTDESC(sb, *indent, tmpint, %d, medium_type_report,
5401 "Medium type report");
5403 if (softc->density_type_bits[i] & SRDS_MEDIA)
5407 SASBADDINTDESC(sb, *indent, tmpint, %d, media_report,
5410 safilldenstypesb(sb, indent, softc->density_info[i],
5411 softc->density_info_valid[i], is_density);
5412 SASBENDNODE(sb, *indent, density_report);
5414 SASBENDNODE(sb, *indent, mtdensity);
5417 #endif /* _KERNEL */
5420 * Read tape block limits command.
5423 scsi_read_block_limits(struct ccb_scsiio *csio, u_int32_t retries,
5424 void (*cbfcnp)(struct cam_periph *, union ccb *),
5425 u_int8_t tag_action,
5426 struct scsi_read_block_limits_data *rlimit_buf,
5427 u_int8_t sense_len, u_int32_t timeout)
5429 struct scsi_read_block_limits *scsi_cmd;
5431 cam_fill_csio(csio, retries, cbfcnp, CAM_DIR_IN, tag_action,
5432 (u_int8_t *)rlimit_buf, sizeof(*rlimit_buf), sense_len,
5433 sizeof(*scsi_cmd), timeout);
5435 scsi_cmd = (struct scsi_read_block_limits *)&csio->cdb_io.cdb_bytes;
5436 bzero(scsi_cmd, sizeof(*scsi_cmd));
5437 scsi_cmd->opcode = READ_BLOCK_LIMITS;
5441 scsi_sa_read_write(struct ccb_scsiio *csio, u_int32_t retries,
5442 void (*cbfcnp)(struct cam_periph *, union ccb *),
5443 u_int8_t tag_action, int readop, int sli,
5444 int fixed, u_int32_t length, u_int8_t *data_ptr,
5445 u_int32_t dxfer_len, u_int8_t sense_len, u_int32_t timeout)
5447 struct scsi_sa_rw *scsi_cmd;
5450 read = (readop & SCSI_RW_DIRMASK) == SCSI_RW_READ;
5452 scsi_cmd = (struct scsi_sa_rw *)&csio->cdb_io.cdb_bytes;
5453 scsi_cmd->opcode = read ? SA_READ : SA_WRITE;
5454 scsi_cmd->sli_fixed = 0;
5456 scsi_cmd->sli_fixed |= SAR_SLI;
5458 scsi_cmd->sli_fixed |= SARW_FIXED;
5459 scsi_ulto3b(length, scsi_cmd->length);
5460 scsi_cmd->control = 0;
5462 cam_fill_csio(csio, retries, cbfcnp, (read ? CAM_DIR_IN : CAM_DIR_OUT) |
5463 ((readop & SCSI_RW_BIO) != 0 ? CAM_DATA_BIO : 0),
5464 tag_action, data_ptr, dxfer_len, sense_len,
5465 sizeof(*scsi_cmd), timeout);
5469 scsi_load_unload(struct ccb_scsiio *csio, u_int32_t retries,
5470 void (*cbfcnp)(struct cam_periph *, union ccb *),
5471 u_int8_t tag_action, int immediate, int eot,
5472 int reten, int load, u_int8_t sense_len,
5475 struct scsi_load_unload *scsi_cmd;
5477 scsi_cmd = (struct scsi_load_unload *)&csio->cdb_io.cdb_bytes;
5478 bzero(scsi_cmd, sizeof(*scsi_cmd));
5479 scsi_cmd->opcode = LOAD_UNLOAD;
5481 scsi_cmd->immediate = SLU_IMMED;
5483 scsi_cmd->eot_reten_load |= SLU_EOT;
5485 scsi_cmd->eot_reten_load |= SLU_RETEN;
5487 scsi_cmd->eot_reten_load |= SLU_LOAD;
5489 cam_fill_csio(csio, retries, cbfcnp, CAM_DIR_NONE, tag_action,
5490 NULL, 0, sense_len, sizeof(*scsi_cmd), timeout);
5494 scsi_rewind(struct ccb_scsiio *csio, u_int32_t retries,
5495 void (*cbfcnp)(struct cam_periph *, union ccb *),
5496 u_int8_t tag_action, int immediate, u_int8_t sense_len,
5499 struct scsi_rewind *scsi_cmd;
5501 scsi_cmd = (struct scsi_rewind *)&csio->cdb_io.cdb_bytes;
5502 bzero(scsi_cmd, sizeof(*scsi_cmd));
5503 scsi_cmd->opcode = REWIND;
5505 scsi_cmd->immediate = SREW_IMMED;
5507 cam_fill_csio(csio, retries, cbfcnp, CAM_DIR_NONE, tag_action, NULL,
5508 0, sense_len, sizeof(*scsi_cmd), timeout);
5512 scsi_space(struct ccb_scsiio *csio, u_int32_t retries,
5513 void (*cbfcnp)(struct cam_periph *, union ccb *),
5514 u_int8_t tag_action, scsi_space_code code,
5515 u_int32_t count, u_int8_t sense_len, u_int32_t timeout)
5517 struct scsi_space *scsi_cmd;
5519 scsi_cmd = (struct scsi_space *)&csio->cdb_io.cdb_bytes;
5520 scsi_cmd->opcode = SPACE;
5521 scsi_cmd->code = code;
5522 scsi_ulto3b(count, scsi_cmd->count);
5523 scsi_cmd->control = 0;
5525 cam_fill_csio(csio, retries, cbfcnp, CAM_DIR_NONE, tag_action, NULL,
5526 0, sense_len, sizeof(*scsi_cmd), timeout);
5530 scsi_write_filemarks(struct ccb_scsiio *csio, u_int32_t retries,
5531 void (*cbfcnp)(struct cam_periph *, union ccb *),
5532 u_int8_t tag_action, int immediate, int setmark,
5533 u_int32_t num_marks, u_int8_t sense_len,
5536 struct scsi_write_filemarks *scsi_cmd;
5538 scsi_cmd = (struct scsi_write_filemarks *)&csio->cdb_io.cdb_bytes;
5539 bzero(scsi_cmd, sizeof(*scsi_cmd));
5540 scsi_cmd->opcode = WRITE_FILEMARKS;
5542 scsi_cmd->byte2 |= SWFMRK_IMMED;
5544 scsi_cmd->byte2 |= SWFMRK_WSMK;
5546 scsi_ulto3b(num_marks, scsi_cmd->num_marks);
5548 cam_fill_csio(csio, retries, cbfcnp, CAM_DIR_NONE, tag_action, NULL,
5549 0, sense_len, sizeof(*scsi_cmd), timeout);
5553 * The reserve and release unit commands differ only by their opcodes.
5556 scsi_reserve_release_unit(struct ccb_scsiio *csio, u_int32_t retries,
5557 void (*cbfcnp)(struct cam_periph *, union ccb *),
5558 u_int8_t tag_action, int third_party,
5559 int third_party_id, u_int8_t sense_len,
5560 u_int32_t timeout, int reserve)
5562 struct scsi_reserve_release_unit *scsi_cmd;
5564 scsi_cmd = (struct scsi_reserve_release_unit *)&csio->cdb_io.cdb_bytes;
5565 bzero(scsi_cmd, sizeof(*scsi_cmd));
5568 scsi_cmd->opcode = RESERVE_UNIT;
5570 scsi_cmd->opcode = RELEASE_UNIT;
5573 scsi_cmd->lun_thirdparty |= SRRU_3RD_PARTY;
5574 scsi_cmd->lun_thirdparty |=
5575 ((third_party_id << SRRU_3RD_SHAMT) & SRRU_3RD_MASK);
5578 cam_fill_csio(csio, retries, cbfcnp, CAM_DIR_NONE, tag_action, NULL,
5579 0, sense_len, sizeof(*scsi_cmd), timeout);
5583 scsi_erase(struct ccb_scsiio *csio, u_int32_t retries,
5584 void (*cbfcnp)(struct cam_periph *, union ccb *),
5585 u_int8_t tag_action, int immediate, int long_erase,
5586 u_int8_t sense_len, u_int32_t timeout)
5588 struct scsi_erase *scsi_cmd;
5590 scsi_cmd = (struct scsi_erase *)&csio->cdb_io.cdb_bytes;
5591 bzero(scsi_cmd, sizeof(*scsi_cmd));
5593 scsi_cmd->opcode = ERASE;
5596 scsi_cmd->lun_imm_long |= SE_IMMED;
5599 scsi_cmd->lun_imm_long |= SE_LONG;
5601 cam_fill_csio(csio, retries, cbfcnp, CAM_DIR_NONE, tag_action, NULL,
5602 0, sense_len, sizeof(*scsi_cmd), timeout);
5606 * Read Tape Position command.
5609 scsi_read_position(struct ccb_scsiio *csio, u_int32_t retries,
5610 void (*cbfcnp)(struct cam_periph *, union ccb *),
5611 u_int8_t tag_action, int hardsoft,
5612 struct scsi_tape_position_data *sbp,
5613 u_int8_t sense_len, u_int32_t timeout)
5615 struct scsi_tape_read_position *scmd;
5617 cam_fill_csio(csio, retries, cbfcnp, CAM_DIR_IN, tag_action,
5618 (u_int8_t *)sbp, sizeof (*sbp), sense_len, sizeof(*scmd), timeout);
5619 scmd = (struct scsi_tape_read_position *)&csio->cdb_io.cdb_bytes;
5620 bzero(scmd, sizeof(*scmd));
5621 scmd->opcode = READ_POSITION;
5622 scmd->byte1 = hardsoft;
5626 * Read Tape Position command.
5629 scsi_read_position_10(struct ccb_scsiio *csio, u_int32_t retries,
5630 void (*cbfcnp)(struct cam_periph *, union ccb *),
5631 u_int8_t tag_action, int service_action,
5632 u_int8_t *data_ptr, u_int32_t length,
5633 u_int32_t sense_len, u_int32_t timeout)
5635 struct scsi_tape_read_position *scmd;
5640 /*flags*/CAM_DIR_IN,
5642 /*data_ptr*/data_ptr,
5643 /*dxfer_len*/length,
5649 scmd = (struct scsi_tape_read_position *)&csio->cdb_io.cdb_bytes;
5650 bzero(scmd, sizeof(*scmd));
5651 scmd->opcode = READ_POSITION;
5652 scmd->byte1 = service_action;
5654 * The length is only currently set (as of SSC4r03) if the extended
5655 * form is specified. The other forms have fixed lengths.
5657 if (service_action == SA_RPOS_EXTENDED_FORM)
5658 scsi_ulto2b(length, scmd->length);
5662 * Set Tape Position command.
5665 scsi_set_position(struct ccb_scsiio *csio, u_int32_t retries,
5666 void (*cbfcnp)(struct cam_periph *, union ccb *),
5667 u_int8_t tag_action, int hardsoft, u_int32_t blkno,
5668 u_int8_t sense_len, u_int32_t timeout)
5670 struct scsi_tape_locate *scmd;
5672 cam_fill_csio(csio, retries, cbfcnp, CAM_DIR_NONE, tag_action,
5673 (u_int8_t *)NULL, 0, sense_len, sizeof(*scmd), timeout);
5674 scmd = (struct scsi_tape_locate *)&csio->cdb_io.cdb_bytes;
5675 bzero(scmd, sizeof(*scmd));
5676 scmd->opcode = LOCATE;
5678 scmd->byte1 |= SA_SPOS_BT;
5679 scsi_ulto4b(blkno, scmd->blkaddr);
5683 * XXX KDM figure out how to make a compatibility function.
5686 scsi_locate_10(struct ccb_scsiio *csio, u_int32_t retries,
5687 void (*cbfcnp)(struct cam_periph *, union ccb *),
5688 u_int8_t tag_action, int immed, int cp, int hard,
5689 int64_t partition, u_int32_t block_address,
5690 int sense_len, u_int32_t timeout)
5692 struct scsi_tape_locate *scmd;
5704 scmd = (struct scsi_tape_locate *)&csio->cdb_io.cdb_bytes;
5705 bzero(scmd, sizeof(*scmd));
5706 scmd->opcode = LOCATE;
5708 scmd->byte1 |= SA_SPOS_IMMED;
5710 scmd->byte1 |= SA_SPOS_CP;
5712 scmd->byte1 |= SA_SPOS_BT;
5713 scsi_ulto4b(block_address, scmd->blkaddr);
5714 scmd->partition = partition;
5718 scsi_locate_16(struct ccb_scsiio *csio, u_int32_t retries,
5719 void (*cbfcnp)(struct cam_periph *, union ccb *),
5720 u_int8_t tag_action, int immed, int cp, u_int8_t dest_type,
5721 int bam, int64_t partition, u_int64_t logical_id,
5722 int sense_len, u_int32_t timeout)
5725 struct scsi_locate_16 *scsi_cmd;
5730 /*flags*/CAM_DIR_NONE,
5738 scsi_cmd = (struct scsi_locate_16 *)&csio->cdb_io.cdb_bytes;
5739 bzero(scsi_cmd, sizeof(*scsi_cmd));
5740 scsi_cmd->opcode = LOCATE_16;
5742 scsi_cmd->byte1 |= SA_LC_IMMEDIATE;
5744 scsi_cmd->byte1 |= SA_LC_CP;
5745 scsi_cmd->byte1 |= (dest_type << SA_LC_DEST_TYPE_SHIFT);
5747 scsi_cmd->byte2 |= bam;
5748 scsi_cmd->partition = partition;
5749 scsi_u64to8b(logical_id, scsi_cmd->logical_id);
5753 scsi_report_density_support(struct ccb_scsiio *csio, u_int32_t retries,
5754 void (*cbfcnp)(struct cam_periph *, union ccb *),
5755 u_int8_t tag_action, int media, int medium_type,
5756 u_int8_t *data_ptr, u_int32_t length,
5757 u_int32_t sense_len, u_int32_t timeout)
5759 struct scsi_report_density_support *scsi_cmd;
5761 scsi_cmd =(struct scsi_report_density_support *)&csio->cdb_io.cdb_bytes;
5762 bzero(scsi_cmd, sizeof(*scsi_cmd));
5764 scsi_cmd->opcode = REPORT_DENSITY_SUPPORT;
5766 scsi_cmd->byte1 |= SRDS_MEDIA;
5767 if (medium_type != 0)
5768 scsi_cmd->byte1 |= SRDS_MEDIUM_TYPE;
5770 scsi_ulto2b(length, scsi_cmd->length);
5775 /*flags*/CAM_DIR_IN,
5777 /*data_ptr*/data_ptr,
5778 /*dxfer_len*/length,
5785 scsi_set_capacity(struct ccb_scsiio *csio, u_int32_t retries,
5786 void (*cbfcnp)(struct cam_periph *, union ccb *),
5787 u_int8_t tag_action, int byte1, u_int32_t proportion,
5788 u_int32_t sense_len, u_int32_t timeout)
5790 struct scsi_set_capacity *scsi_cmd;
5792 scsi_cmd = (struct scsi_set_capacity *)&csio->cdb_io.cdb_bytes;
5793 bzero(scsi_cmd, sizeof(*scsi_cmd));
5795 scsi_cmd->opcode = SET_CAPACITY;
5797 scsi_cmd->byte1 = byte1;
5798 scsi_ulto2b(proportion, scsi_cmd->cap_proportion);
5803 /*flags*/CAM_DIR_NONE,
5813 scsi_format_medium(struct ccb_scsiio *csio, u_int32_t retries,
5814 void (*cbfcnp)(struct cam_periph *, union ccb *),
5815 u_int8_t tag_action, int byte1, int byte2,
5816 u_int8_t *data_ptr, u_int32_t dxfer_len,
5817 u_int32_t sense_len, u_int32_t timeout)
5819 struct scsi_format_medium *scsi_cmd;
5821 scsi_cmd = (struct scsi_format_medium*)&csio->cdb_io.cdb_bytes;
5822 bzero(scsi_cmd, sizeof(*scsi_cmd));
5824 scsi_cmd->opcode = FORMAT_MEDIUM;
5826 scsi_cmd->byte1 = byte1;
5827 scsi_cmd->byte2 = byte2;
5829 scsi_ulto2b(dxfer_len, scsi_cmd->length);
5834 /*flags*/(dxfer_len > 0) ? CAM_DIR_OUT : CAM_DIR_NONE,
5836 /*data_ptr*/ data_ptr,
5837 /*dxfer_len*/ dxfer_len,
5844 scsi_allow_overwrite(struct ccb_scsiio *csio, u_int32_t retries,
5845 void (*cbfcnp)(struct cam_periph *, union ccb *),
5846 u_int8_t tag_action, int allow_overwrite, int partition,
5847 u_int64_t logical_id, u_int32_t sense_len, u_int32_t timeout)
5849 struct scsi_allow_overwrite *scsi_cmd;
5851 scsi_cmd = (struct scsi_allow_overwrite *)&csio->cdb_io.cdb_bytes;
5852 bzero(scsi_cmd, sizeof(*scsi_cmd));
5854 scsi_cmd->opcode = ALLOW_OVERWRITE;
5856 scsi_cmd->allow_overwrite = allow_overwrite;
5857 scsi_cmd->partition = partition;
5858 scsi_u64to8b(logical_id, scsi_cmd->logical_id);