4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
25 * Copyright 2007 Sun Microsystems, Inc. All rights reserved.
26 * Copyright (c) 2012 by Delphix. All rights reserved.
27 * Use is subject to license terms.
31 * Copyright (c) 2011, Joyent, Inc. All rights reserved.
34 #ifndef _SYS_DTRACE_IMPL_H
35 #define _SYS_DTRACE_IMPL_H
42 * DTrace Dynamic Tracing Software: Kernel Implementation Interfaces
44 * Note: The contents of this file are private to the implementation of the
45 * Solaris system and DTrace subsystem and are subject to change at any time
46 * without notice. Applications and drivers using these interfaces will fail
47 * to run on future releases. These interfaces should not be used for any
48 * purpose except those expressly outlined in dtrace(7D) and libdtrace(3LIB).
49 * Please refer to the "Solaris Dynamic Tracing Guide" for more information.
52 #include <sys/dtrace.h>
55 typedef uint32_t pc_t;
57 typedef uintptr_t pc_t;
59 typedef u_long greg_t;
63 * DTrace Implementation Constants and Typedefs
65 #define DTRACE_MAXPROPLEN 128
66 #define DTRACE_DYNVAR_CHUNKSIZE 256
70 struct dtrace_predicate;
72 struct dtrace_provider;
75 typedef struct dtrace_probe dtrace_probe_t;
76 typedef struct dtrace_ecb dtrace_ecb_t;
77 typedef struct dtrace_predicate dtrace_predicate_t;
78 typedef struct dtrace_action dtrace_action_t;
79 typedef struct dtrace_provider dtrace_provider_t;
80 typedef struct dtrace_meta dtrace_meta_t;
81 typedef struct dtrace_state dtrace_state_t;
82 typedef uint32_t dtrace_optid_t;
83 typedef uint32_t dtrace_specid_t;
84 typedef uint64_t dtrace_genid_t;
89 * The probe is the fundamental unit of the DTrace architecture. Probes are
90 * created by DTrace providers, and managed by the DTrace framework. A probe
91 * is identified by a unique <provider, module, function, name> tuple, and has
92 * a unique probe identifier assigned to it. (Some probes are not associated
93 * with a specific point in text; these are called _unanchored probes_ and have
94 * no module or function associated with them.) Probes are represented as a
95 * dtrace_probe structure. To allow quick lookups based on each element of the
96 * probe tuple, probes are hashed by each of provider, module, function and
97 * name. (If a lookup is performed based on a regular expression, a
98 * dtrace_probekey is prepared, and a linear search is performed.) Each probe
99 * is additionally pointed to by a linear array indexed by its identifier. The
100 * identifier is the provider's mechanism for indicating to the DTrace
101 * framework that a probe has fired: the identifier is passed as the first
102 * argument to dtrace_probe(), where it is then mapped into the corresponding
103 * dtrace_probe structure. From the dtrace_probe structure, dtrace_probe() can
104 * iterate over the probe's list of enabling control blocks; see "DTrace
105 * Enabling Control Blocks", below.)
107 struct dtrace_probe {
108 dtrace_id_t dtpr_id; /* probe identifier */
109 dtrace_ecb_t *dtpr_ecb; /* ECB list; see below */
110 dtrace_ecb_t *dtpr_ecb_last; /* last ECB in list */
111 void *dtpr_arg; /* provider argument */
112 dtrace_cacheid_t dtpr_predcache; /* predicate cache ID */
113 int dtpr_aframes; /* artificial frames */
114 dtrace_provider_t *dtpr_provider; /* pointer to provider */
115 char *dtpr_mod; /* probe's module name */
116 char *dtpr_func; /* probe's function name */
117 char *dtpr_name; /* probe's name */
118 dtrace_probe_t *dtpr_nextmod; /* next in module hash */
119 dtrace_probe_t *dtpr_prevmod; /* previous in module hash */
120 dtrace_probe_t *dtpr_nextfunc; /* next in function hash */
121 dtrace_probe_t *dtpr_prevfunc; /* previous in function hash */
122 dtrace_probe_t *dtpr_nextname; /* next in name hash */
123 dtrace_probe_t *dtpr_prevname; /* previous in name hash */
124 dtrace_genid_t dtpr_gen; /* probe generation ID */
127 typedef int dtrace_probekey_f(const char *, const char *, int);
129 typedef struct dtrace_probekey {
130 char *dtpk_prov; /* provider name to match */
131 dtrace_probekey_f *dtpk_pmatch; /* provider matching function */
132 char *dtpk_mod; /* module name to match */
133 dtrace_probekey_f *dtpk_mmatch; /* module matching function */
134 char *dtpk_func; /* func name to match */
135 dtrace_probekey_f *dtpk_fmatch; /* func matching function */
136 char *dtpk_name; /* name to match */
137 dtrace_probekey_f *dtpk_nmatch; /* name matching function */
138 dtrace_id_t dtpk_id; /* identifier to match */
141 typedef struct dtrace_hashbucket {
142 struct dtrace_hashbucket *dthb_next; /* next on hash chain */
143 dtrace_probe_t *dthb_chain; /* chain of probes */
144 int dthb_len; /* number of probes here */
145 } dtrace_hashbucket_t;
147 typedef struct dtrace_hash {
148 dtrace_hashbucket_t **dth_tab; /* hash table */
149 int dth_size; /* size of hash table */
150 int dth_mask; /* mask to index into table */
151 int dth_nbuckets; /* total number of buckets */
152 uintptr_t dth_nextoffs; /* offset of next in probe */
153 uintptr_t dth_prevoffs; /* offset of prev in probe */
154 uintptr_t dth_stroffs; /* offset of str in probe */
158 * DTrace Enabling Control Blocks
160 * When a provider wishes to fire a probe, it calls into dtrace_probe(),
161 * passing the probe identifier as the first argument. As described above,
162 * dtrace_probe() maps the identifier into a pointer to a dtrace_probe_t
163 * structure. This structure contains information about the probe, and a
164 * pointer to the list of Enabling Control Blocks (ECBs). Each ECB points to
165 * DTrace consumer state, and contains an optional predicate, and a list of
166 * actions. (Shown schematically below.) The ECB abstraction allows a single
167 * probe to be multiplexed across disjoint consumers, or across disjoint
168 * enablings of a single probe within one consumer.
170 * Enabling Control Block
172 * +------------------------+
173 * | dtrace_epid_t ---------+--------------> Enabled Probe ID (EPID)
174 * | dtrace_state_t * ------+--------------> State associated with this ECB
175 * | dtrace_predicate_t * --+---------+
176 * | dtrace_action_t * -----+----+ |
177 * | dtrace_ecb_t * ---+ | | | Predicate (if any)
178 * +-------------------+----+ | | dtrace_predicate_t
179 * | | +---> +--------------------+
180 * | | | dtrace_difo_t * ---+----> DIFO
181 * | | +--------------------+
183 * Next ECB | | Action
184 * (if any) | | dtrace_action_t
185 * : +--> +-------------------+
186 * : | dtrace_actkind_t -+------> kind
187 * v | dtrace_difo_t * --+------> DIFO (if any)
188 * | dtrace_recdesc_t -+------> record descr.
189 * | dtrace_action_t * +------+
190 * +-------------------+ |
192 * +-------------------------------+ (if any)
196 * +--> +-------------------+
197 * | dtrace_actkind_t -+------> kind
198 * | dtrace_difo_t * --+------> DIFO (if any)
199 * | dtrace_action_t * +------+
200 * +-------------------+ |
202 * +-------------------------------+ (if any)
208 * dtrace_probe() iterates over the ECB list. If the ECB needs less space
209 * than is available in the principal buffer, the ECB is processed: if the
210 * predicate is non-NULL, the DIF object is executed. If the result is
211 * non-zero, the action list is processed, with each action being executed
212 * accordingly. When the action list has been completely executed, processing
213 * advances to the next ECB. The ECB abstraction allows disjoint consumers
214 * to multiplex on single probes.
216 * Execution of the ECB results in consuming dte_size bytes in the buffer
217 * to record data. During execution, dte_needed bytes must be available in
218 * the buffer. This space is used for both recorded data and tuple data.
221 dtrace_epid_t dte_epid; /* enabled probe ID */
222 uint32_t dte_alignment; /* required alignment */
223 size_t dte_needed; /* space needed for execution */
224 size_t dte_size; /* size of recorded payload */
225 dtrace_predicate_t *dte_predicate; /* predicate, if any */
226 dtrace_action_t *dte_action; /* actions, if any */
227 dtrace_ecb_t *dte_next; /* next ECB on probe */
228 dtrace_state_t *dte_state; /* pointer to state */
229 uint32_t dte_cond; /* security condition */
230 dtrace_probe_t *dte_probe; /* pointer to probe */
231 dtrace_action_t *dte_action_last; /* last action on ECB */
232 uint64_t dte_uarg; /* library argument */
235 struct dtrace_predicate {
236 dtrace_difo_t *dtp_difo; /* DIF object */
237 dtrace_cacheid_t dtp_cacheid; /* cache identifier */
238 int dtp_refcnt; /* reference count */
241 struct dtrace_action {
242 dtrace_actkind_t dta_kind; /* kind of action */
243 uint16_t dta_intuple; /* boolean: in aggregation */
244 uint32_t dta_refcnt; /* reference count */
245 dtrace_difo_t *dta_difo; /* pointer to DIFO */
246 dtrace_recdesc_t dta_rec; /* record description */
247 dtrace_action_t *dta_prev; /* previous action */
248 dtrace_action_t *dta_next; /* next action */
251 typedef struct dtrace_aggregation {
252 dtrace_action_t dtag_action; /* action; must be first */
253 dtrace_aggid_t dtag_id; /* identifier */
254 dtrace_ecb_t *dtag_ecb; /* corresponding ECB */
255 dtrace_action_t *dtag_first; /* first action in tuple */
256 uint32_t dtag_base; /* base of aggregation */
257 uint8_t dtag_hasarg; /* boolean: has argument */
258 uint64_t dtag_initial; /* initial value */
259 void (*dtag_aggregate)(uint64_t *, uint64_t, uint64_t);
260 } dtrace_aggregation_t;
265 * Principal buffers, aggregation buffers, and speculative buffers are all
266 * managed with the dtrace_buffer structure. By default, this structure
267 * includes twin data buffers -- dtb_tomax and dtb_xamot -- that serve as the
268 * active and passive buffers, respectively. For speculative buffers,
269 * dtb_xamot will be NULL; for "ring" and "fill" buffers, dtb_xamot will point
270 * to a scratch buffer. For all buffer types, the dtrace_buffer structure is
271 * always allocated on a per-CPU basis; a single dtrace_buffer structure is
272 * never shared among CPUs. (That is, there is never true sharing of the
273 * dtrace_buffer structure; to prevent false sharing of the structure, it must
274 * always be aligned to the coherence granularity -- generally 64 bytes.)
276 * One of the critical design decisions of DTrace is that a given ECB always
277 * stores the same quantity and type of data. This is done to assure that the
278 * only metadata required for an ECB's traced data is the EPID. That is, from
279 * the EPID, the consumer can determine the data layout. (The data buffer
280 * layout is shown schematically below.) By assuring that one can determine
281 * data layout from the EPID, the metadata stream can be separated from the
282 * data stream -- simplifying the data stream enormously. The ECB always
283 * proceeds the recorded data as part of the dtrace_rechdr_t structure that
284 * includes the EPID and a high-resolution timestamp used for output ordering
287 * base of data buffer ---> +--------+--------------------+--------+
288 * | rechdr | data | rechdr |
289 * +--------+------+--------+----+--------+
290 * | data | rechdr | data |
291 * +---------------+--------+-------------+
293 * +--------+--------------------+--------+
294 * | rechdr | data | |
295 * +--------+--------------------+ |
305 * limit of data buffer ---> +--------------------------------------+
307 * When evaluating an ECB, dtrace_probe() determines if the ECB's needs of the
308 * principal buffer (both scratch and payload) exceed the available space. If
309 * the ECB's needs exceed available space (and if the principal buffer policy
310 * is the default "switch" policy), the ECB is dropped, the buffer's drop count
311 * is incremented, and processing advances to the next ECB. If the ECB's needs
312 * can be met with the available space, the ECB is processed, but the offset in
313 * the principal buffer is only advanced if the ECB completes processing
316 * When a buffer is to be switched (either because the buffer is the principal
317 * buffer with a "switch" policy or because it is an aggregation buffer), a
318 * cross call is issued to the CPU associated with the buffer. In the cross
319 * call context, interrupts are disabled, and the active and the inactive
320 * buffers are atomically switched. This involves switching the data pointers,
321 * copying the various state fields (offset, drops, errors, etc.) into their
322 * inactive equivalents, and clearing the state fields. Because interrupts are
323 * disabled during this procedure, the switch is guaranteed to appear atomic to
326 * DTrace Ring Buffering
328 * To process a ring buffer correctly, one must know the oldest valid record.
329 * Processing starts at the oldest record in the buffer and continues until
330 * the end of the buffer is reached. Processing then resumes starting with
331 * the record stored at offset 0 in the buffer, and continues until the
332 * youngest record is processed. If trace records are of a fixed-length,
333 * determining the oldest record is trivial:
335 * - If the ring buffer has not wrapped, the oldest record is the record
336 * stored at offset 0.
338 * - If the ring buffer has wrapped, the oldest record is the record stored
339 * at the current offset.
341 * With variable length records, however, just knowing the current offset
342 * doesn't suffice for determining the oldest valid record: assuming that one
343 * allows for arbitrary data, one has no way of searching forward from the
344 * current offset to find the oldest valid record. (That is, one has no way
345 * of separating data from metadata.) It would be possible to simply refuse to
346 * process any data in the ring buffer between the current offset and the
347 * limit, but this leaves (potentially) an enormous amount of otherwise valid
350 * To effect ring buffering, we track two offsets in the buffer: the current
351 * offset and the _wrapped_ offset. If a request is made to reserve some
352 * amount of data, and the buffer has wrapped, the wrapped offset is
353 * incremented until the wrapped offset minus the current offset is greater
354 * than or equal to the reserve request. This is done by repeatedly looking
355 * up the ECB corresponding to the EPID at the current wrapped offset, and
356 * incrementing the wrapped offset by the size of the data payload
357 * corresponding to that ECB. If this offset is greater than or equal to the
358 * limit of the data buffer, the wrapped offset is set to 0. Thus, the
359 * current offset effectively "chases" the wrapped offset around the buffer.
362 * base of data buffer ---> +------+--------------------+------+
363 * | EPID | data | EPID |
364 * +------+--------+------+----+------+
365 * | data | EPID | data |
366 * +---------------+------+-----------+
368 * +------+---------------------------+
370 * current offset ---> +------+---------------------------+
372 * wrapped offset ---> +------+--------------------+------+
373 * | EPID | data | EPID |
374 * +------+--------+------+----+------+
375 * | data | EPID | data |
376 * +---------------+------+-----------+
379 * . ... valid data ... .
382 * +------+-------------+------+------+
383 * | EPID | data | EPID | data |
384 * +------+------------++------+------+
385 * | data, cont. | leftover |
386 * limit of data buffer ---> +-------------------+--------------+
388 * If the amount of requested buffer space exceeds the amount of space
389 * available between the current offset and the end of the buffer:
391 * (1) all words in the data buffer between the current offset and the limit
392 * of the data buffer (marked "leftover", above) are set to
395 * (2) the wrapped offset is set to zero
397 * (3) the iteration process described above occurs until the wrapped offset
398 * is greater than the amount of desired space.
400 * The wrapped offset is implemented by (re-)using the inactive offset.
401 * In a "switch" buffer policy, the inactive offset stores the offset in
402 * the inactive buffer; in a "ring" buffer policy, it stores the wrapped
405 * DTrace Scratch Buffering
407 * Some ECBs may wish to allocate dynamically-sized temporary scratch memory.
408 * To accommodate such requests easily, scratch memory may be allocated in
409 * the buffer beyond the current offset plus the needed memory of the current
410 * ECB. If there isn't sufficient room in the buffer for the requested amount
411 * of scratch space, the allocation fails and an error is generated. Scratch
412 * memory is tracked in the dtrace_mstate_t and is automatically freed when
413 * the ECB ceases processing. Note that ring buffers cannot allocate their
414 * scratch from the principal buffer -- lest they needlessly overwrite older,
415 * valid data. Ring buffers therefore have their own dedicated scratch buffer
416 * from which scratch is allocated.
418 #define DTRACEBUF_RING 0x0001 /* bufpolicy set to "ring" */
419 #define DTRACEBUF_FILL 0x0002 /* bufpolicy set to "fill" */
420 #define DTRACEBUF_NOSWITCH 0x0004 /* do not switch buffer */
421 #define DTRACEBUF_WRAPPED 0x0008 /* ring buffer has wrapped */
422 #define DTRACEBUF_DROPPED 0x0010 /* drops occurred */
423 #define DTRACEBUF_ERROR 0x0020 /* errors occurred */
424 #define DTRACEBUF_FULL 0x0040 /* "fill" buffer is full */
425 #define DTRACEBUF_CONSUMED 0x0080 /* buffer has been consumed */
426 #define DTRACEBUF_INACTIVE 0x0100 /* buffer is not yet active */
428 typedef struct dtrace_buffer {
429 uint64_t dtb_offset; /* current offset in buffer */
430 uint64_t dtb_size; /* size of buffer */
431 uint32_t dtb_flags; /* flags */
432 uint32_t dtb_drops; /* number of drops */
433 caddr_t dtb_tomax; /* active buffer */
434 caddr_t dtb_xamot; /* inactive buffer */
435 uint32_t dtb_xamot_flags; /* inactive flags */
436 uint32_t dtb_xamot_drops; /* drops in inactive buffer */
437 uint64_t dtb_xamot_offset; /* offset in inactive buffer */
438 uint32_t dtb_errors; /* number of errors */
439 uint32_t dtb_xamot_errors; /* errors in inactive buffer */
441 uint64_t dtb_pad1; /* pad out to 64 bytes */
443 uint64_t dtb_switched; /* time of last switch */
444 uint64_t dtb_interval; /* observed switch interval */
445 uint64_t dtb_pad2[6]; /* pad to avoid false sharing */
449 * DTrace Aggregation Buffers
451 * Aggregation buffers use much of the same mechanism as described above
452 * ("DTrace Buffers"). However, because an aggregation is fundamentally a
453 * hash, there exists dynamic metadata associated with an aggregation buffer
454 * that is not associated with other kinds of buffers. This aggregation
455 * metadata is _only_ relevant for the in-kernel implementation of
456 * aggregations; it is not actually relevant to user-level consumers. To do
457 * this, we allocate dynamic aggregation data (hash keys and hash buckets)
458 * starting below the _limit_ of the buffer, and we allocate data from the
459 * _base_ of the buffer. When the aggregation buffer is copied out, _only_ the
460 * data is copied out; the metadata is simply discarded. Schematically,
461 * aggregation buffers look like:
463 * base of data buffer ---> +-------+------+-----------+-------+
464 * | aggid | key | value | aggid |
465 * +-------+------+-----------+-------+
467 * +-------+-------+-----+------------+
468 * | value | aggid | key | value |
469 * +-------+------++-----+------+-----+
470 * | aggid | key | value | |
471 * +-------+------+-------------+ |
481 * | || +------------+
483 * +---------------------+ |
485 * | (dtrace_aggkey structures) |
487 * +----------------------------------+
489 * | (dtrace_aggbuffer structure) |
491 * limit of data buffer ---> +----------------------------------+
494 * As implied above, just as we assure that ECBs always store a constant
495 * amount of data, we assure that a given aggregation -- identified by its
496 * aggregation ID -- always stores data of a constant quantity and type.
497 * As with EPIDs, this allows the aggregation ID to serve as the metadata for a
500 * Note that the size of the dtrace_aggkey structure must be sizeof (uintptr_t)
501 * aligned. (If this the structure changes such that this becomes false, an
502 * assertion will fail in dtrace_aggregate().)
504 typedef struct dtrace_aggkey {
505 uint32_t dtak_hashval; /* hash value */
506 uint32_t dtak_action:4; /* action -- 4 bits */
507 uint32_t dtak_size:28; /* size -- 28 bits */
508 caddr_t dtak_data; /* data pointer */
509 struct dtrace_aggkey *dtak_next; /* next in hash chain */
512 typedef struct dtrace_aggbuffer {
513 uintptr_t dtagb_hashsize; /* number of buckets */
514 uintptr_t dtagb_free; /* free list of keys */
515 dtrace_aggkey_t **dtagb_hash; /* hash table */
516 } dtrace_aggbuffer_t;
519 * DTrace Speculations
521 * Speculations have a per-CPU buffer and a global state. Once a speculation
522 * buffer has been comitted or discarded, it cannot be reused until all CPUs
523 * have taken the same action (commit or discard) on their respective
524 * speculative buffer. However, because DTrace probes may execute in arbitrary
525 * context, other CPUs cannot simply be cross-called at probe firing time to
526 * perform the necessary commit or discard. The speculation states thus
527 * optimize for the case that a speculative buffer is only active on one CPU at
528 * the time of a commit() or discard() -- for if this is the case, other CPUs
529 * need not take action, and the speculation is immediately available for
530 * reuse. If the speculation is active on multiple CPUs, it must be
531 * asynchronously cleaned -- potentially leading to a higher rate of dirty
532 * speculative drops. The speculation states are as follows:
534 * DTRACESPEC_INACTIVE <= Initial state; inactive speculation
535 * DTRACESPEC_ACTIVE <= Allocated, but not yet speculatively traced to
536 * DTRACESPEC_ACTIVEONE <= Speculatively traced to on one CPU
537 * DTRACESPEC_ACTIVEMANY <= Speculatively traced to on more than one CPU
538 * DTRACESPEC_COMMITTING <= Currently being commited on one CPU
539 * DTRACESPEC_COMMITTINGMANY <= Currently being commited on many CPUs
540 * DTRACESPEC_DISCARDING <= Currently being discarded on many CPUs
542 * The state transition diagram is as follows:
544 * +----------------------------------------------------------+
547 * | +-------------------| COMMITTING |<-----------------+ |
548 * | | +------------+ | |
549 * | | copied spec. ^ commit() on | | discard() on
550 * | | into principal | active CPU | | active CPU
553 * +----------+ +--------+ +-----------+
554 * | INACTIVE |---------------->| ACTIVE |--------------->| ACTIVEONE |
555 * +----------+ speculation() +--------+ speculate() +-----------+
557 * | | | discard() | |
558 * | | asynchronously | discard() on | | speculate()
559 * | | cleaned V inactive CPU | | on inactive
560 * | | +------------+ | | CPU
561 * | +-------------------| DISCARDING |<-----------------+ |
563 * | asynchronously ^ |
564 * | copied spec. | discard() |
565 * | into principal +------------------------+ |
567 * +----------------+ commit() +------------+
568 * | COMMITTINGMANY |<----------------------------------| ACTIVEMANY |
569 * +----------------+ +------------+
571 typedef enum dtrace_speculation_state {
572 DTRACESPEC_INACTIVE = 0,
574 DTRACESPEC_ACTIVEONE,
575 DTRACESPEC_ACTIVEMANY,
576 DTRACESPEC_COMMITTING,
577 DTRACESPEC_COMMITTINGMANY,
578 DTRACESPEC_DISCARDING
579 } dtrace_speculation_state_t;
581 typedef struct dtrace_speculation {
582 dtrace_speculation_state_t dtsp_state; /* current speculation state */
583 int dtsp_cleaning; /* non-zero if being cleaned */
584 dtrace_buffer_t *dtsp_buffer; /* speculative buffer */
585 } dtrace_speculation_t;
588 * DTrace Dynamic Variables
590 * The dynamic variable problem is obviously decomposed into two subproblems:
591 * allocating new dynamic storage, and freeing old dynamic storage. The
592 * presence of the second problem makes the first much more complicated -- or
593 * rather, the absence of the second renders the first trivial. This is the
594 * case with aggregations, for which there is effectively no deallocation of
595 * dynamic storage. (Or more accurately, all dynamic storage is deallocated
596 * when a snapshot is taken of the aggregation.) As DTrace dynamic variables
597 * allow for both dynamic allocation and dynamic deallocation, the
598 * implementation of dynamic variables is quite a bit more complicated than
599 * that of their aggregation kin.
601 * We observe that allocating new dynamic storage is tricky only because the
602 * size can vary -- the allocation problem is much easier if allocation sizes
603 * are uniform. We further observe that in D, the size of dynamic variables is
604 * actually _not_ dynamic -- dynamic variable sizes may be determined by static
605 * analysis of DIF text. (This is true even of putatively dynamically-sized
606 * objects like strings and stacks, the sizes of which are dictated by the
607 * "stringsize" and "stackframes" variables, respectively.) We exploit this by
608 * performing this analysis on all DIF before enabling any probes. For each
609 * dynamic load or store, we calculate the dynamically-allocated size plus the
610 * size of the dtrace_dynvar structure plus the storage required to key the
611 * data. For all DIF, we take the largest value and dub it the _chunksize_.
612 * We then divide dynamic memory into two parts: a hash table that is wide
613 * enough to have every chunk in its own bucket, and a larger region of equal
614 * chunksize units. Whenever we wish to dynamically allocate a variable, we
615 * always allocate a single chunk of memory. Depending on the uniformity of
616 * allocation, this will waste some amount of memory -- but it eliminates the
617 * non-determinism inherent in traditional heap fragmentation.
619 * Dynamic objects are allocated by storing a non-zero value to them; they are
620 * deallocated by storing a zero value to them. Dynamic variables are
621 * complicated enormously by being shared between CPUs. In particular,
622 * consider the following scenario:
625 * +---------------------------------+ +---------------------------------+
627 * | allocates dynamic object a[123] | | |
628 * | by storing the value 345 to it | | |
630 * | | | wishing to load from object |
631 * | | | a[123], performs lookup in |
632 * | | | dynamic variable space |
634 * | deallocates object a[123] by | | |
635 * | storing 0 to it | | |
637 * | allocates dynamic object b[567] | | performs load from a[123] |
638 * | by storing the value 789 to it | | |
642 * This is obviously a race in the D program, but there are nonetheless only
643 * two valid values for CPU B's load from a[123]: 345 or 0. Most importantly,
644 * CPU B may _not_ see the value 789 for a[123].
646 * There are essentially two ways to deal with this:
648 * (1) Explicitly spin-lock variables. That is, if CPU B wishes to load
649 * from a[123], it needs to lock a[123] and hold the lock for the
650 * duration that it wishes to manipulate it.
652 * (2) Avoid reusing freed chunks until it is known that no CPU is referring
655 * The implementation of (1) is rife with complexity, because it requires the
656 * user of a dynamic variable to explicitly decree when they are done using it.
657 * Were all variables by value, this perhaps wouldn't be debilitating -- but
658 * dynamic variables of non-scalar types are tracked by reference. That is, if
659 * a dynamic variable is, say, a string, and that variable is to be traced to,
660 * say, the principal buffer, the DIF emulation code returns to the main
661 * dtrace_probe() loop a pointer to the underlying storage, not the contents of
662 * the storage. Further, code calling on DIF emulation would have to be aware
663 * that the DIF emulation has returned a reference to a dynamic variable that
664 * has been potentially locked. The variable would have to be unlocked after
665 * the main dtrace_probe() loop is finished with the variable, and the main
666 * dtrace_probe() loop would have to be careful to not call any further DIF
667 * emulation while the variable is locked to avoid deadlock. More generally,
668 * if one were to implement (1), DIF emulation code dealing with dynamic
669 * variables could only deal with one dynamic variable at a time (lest deadlock
670 * result). To sum, (1) exports too much subtlety to the users of dynamic
671 * variables -- increasing maintenance burden and imposing serious constraints
672 * on future DTrace development.
674 * The implementation of (2) is also complex, but the complexity is more
675 * manageable. We need to be sure that when a variable is deallocated, it is
676 * not placed on a traditional free list, but rather on a _dirty_ list. Once a
677 * variable is on a dirty list, it cannot be found by CPUs performing a
678 * subsequent lookup of the variable -- but it may still be in use by other
679 * CPUs. To assure that all CPUs that may be seeing the old variable have
680 * cleared out of probe context, a dtrace_sync() can be issued. Once the
681 * dtrace_sync() has completed, it can be known that all CPUs are done
682 * manipulating the dynamic variable -- the dirty list can be atomically
683 * appended to the free list. Unfortunately, there's a slight hiccup in this
684 * mechanism: dtrace_sync() may not be issued from probe context. The
685 * dtrace_sync() must be therefore issued asynchronously from non-probe
686 * context. For this we rely on the DTrace cleaner, a cyclic that runs at the
687 * "cleanrate" frequency. To ease this implementation, we define several chunk
690 * - Dirty. Deallocated chunks, not yet cleaned. Not available.
692 * - Rinsing. Formerly dirty chunks that are currently being asynchronously
693 * cleaned. Not available, but will be shortly. Dynamic variable
694 * allocation may not spin or block for availability, however.
696 * - Clean. Clean chunks, ready for allocation -- but not on the free list.
698 * - Free. Available for allocation.
700 * Moreover, to avoid absurd contention, _each_ of these lists is implemented
701 * on a per-CPU basis. This is only for performance, not correctness; chunks
702 * may be allocated from another CPU's free list. The algorithm for allocation
705 * (1) Attempt to atomically allocate from current CPU's free list. If list
706 * is non-empty and allocation is successful, allocation is complete.
708 * (2) If the clean list is non-empty, atomically move it to the free list,
711 * (3) If the dynamic variable space is in the CLEAN state, look for free
712 * and clean lists on other CPUs by setting the current CPU to the next
713 * CPU, and reattempting (1). If the next CPU is the current CPU (that
714 * is, if all CPUs have been checked), atomically switch the state of
715 * the dynamic variable space based on the following:
717 * - If no free chunks were found and no dirty chunks were found,
718 * atomically set the state to EMPTY.
720 * - If dirty chunks were found, atomically set the state to DIRTY.
722 * - If rinsing chunks were found, atomically set the state to RINSING.
724 * (4) Based on state of dynamic variable space state, increment appropriate
725 * counter to indicate dynamic drops (if in EMPTY state) vs. dynamic
726 * dirty drops (if in DIRTY state) vs. dynamic rinsing drops (if in
727 * RINSING state). Fail the allocation.
729 * The cleaning cyclic operates with the following algorithm: for all CPUs
730 * with a non-empty dirty list, atomically move the dirty list to the rinsing
731 * list. Perform a dtrace_sync(). For all CPUs with a non-empty rinsing list,
732 * atomically move the rinsing list to the clean list. Perform another
733 * dtrace_sync(). By this point, all CPUs have seen the new clean list; the
734 * state of the dynamic variable space can be restored to CLEAN.
736 * There exist two final races that merit explanation. The first is a simple
740 * +---------------------------------+ +---------------------------------+
742 * | allocates dynamic object a[123] | | allocates dynamic object a[123] |
743 * | by storing the value 345 to it | | by storing the value 567 to it |
748 * Again, this is a race in the D program. It can be resolved by having a[123]
749 * hold the value 345 or a[123] hold the value 567 -- but it must be true that
750 * a[123] have only _one_ of these values. (That is, the racing CPUs may not
751 * put the same element twice on the same hash chain.) This is resolved
752 * simply: before the allocation is undertaken, the start of the new chunk's
753 * hash chain is noted. Later, after the allocation is complete, the hash
754 * chain is atomically switched to point to the new element. If this fails
755 * (because of either concurrent allocations or an allocation concurrent with a
756 * deletion), the newly allocated chunk is deallocated to the dirty list, and
757 * the whole process of looking up (and potentially allocating) the dynamic
758 * variable is reattempted.
760 * The final race is a simple deallocation race:
763 * +---------------------------------+ +---------------------------------+
765 * | deallocates dynamic object | | deallocates dynamic object |
766 * | a[123] by storing the value 0 | | a[123] by storing the value 0 |
767 * | to it | | to it |
772 * Once again, this is a race in the D program, but it is one that we must
773 * handle without corrupting the underlying data structures. Because
774 * deallocations require the deletion of a chunk from the middle of a hash
775 * chain, we cannot use a single-word atomic operation to remove it. For this,
776 * we add a spin lock to the hash buckets that is _only_ used for deallocations
777 * (allocation races are handled as above). Further, this spin lock is _only_
778 * held for the duration of the delete; before control is returned to the DIF
779 * emulation code, the hash bucket is unlocked.
781 typedef struct dtrace_key {
782 uint64_t dttk_value; /* data value or data pointer */
783 uint64_t dttk_size; /* 0 if by-val, >0 if by-ref */
786 typedef struct dtrace_tuple {
787 uint32_t dtt_nkeys; /* number of keys in tuple */
788 uint32_t dtt_pad; /* padding */
789 dtrace_key_t dtt_key[1]; /* array of tuple keys */
792 typedef struct dtrace_dynvar {
793 uint64_t dtdv_hashval; /* hash value -- 0 if free */
794 struct dtrace_dynvar *dtdv_next; /* next on list or hash chain */
795 void *dtdv_data; /* pointer to data */
796 dtrace_tuple_t dtdv_tuple; /* tuple key */
799 typedef enum dtrace_dynvar_op {
801 DTRACE_DYNVAR_NOALLOC,
802 DTRACE_DYNVAR_DEALLOC
803 } dtrace_dynvar_op_t;
805 typedef struct dtrace_dynhash {
806 dtrace_dynvar_t *dtdh_chain; /* hash chain for this bucket */
807 uintptr_t dtdh_lock; /* deallocation lock */
809 uintptr_t dtdh_pad[6]; /* pad to avoid false sharing */
811 uintptr_t dtdh_pad[14]; /* pad to avoid false sharing */
815 typedef struct dtrace_dstate_percpu {
816 dtrace_dynvar_t *dtdsc_free; /* free list for this CPU */
817 dtrace_dynvar_t *dtdsc_dirty; /* dirty list for this CPU */
818 dtrace_dynvar_t *dtdsc_rinsing; /* rinsing list for this CPU */
819 dtrace_dynvar_t *dtdsc_clean; /* clean list for this CPU */
820 uint64_t dtdsc_drops; /* number of capacity drops */
821 uint64_t dtdsc_dirty_drops; /* number of dirty drops */
822 uint64_t dtdsc_rinsing_drops; /* number of rinsing drops */
824 uint64_t dtdsc_pad; /* pad to avoid false sharing */
826 uint64_t dtdsc_pad[2]; /* pad to avoid false sharing */
828 } dtrace_dstate_percpu_t;
830 typedef enum dtrace_dstate_state {
831 DTRACE_DSTATE_CLEAN = 0,
834 DTRACE_DSTATE_RINSING
835 } dtrace_dstate_state_t;
837 typedef struct dtrace_dstate {
838 void *dtds_base; /* base of dynamic var. space */
839 size_t dtds_size; /* size of dynamic var. space */
840 size_t dtds_hashsize; /* number of buckets in hash */
841 size_t dtds_chunksize; /* size of each chunk */
842 dtrace_dynhash_t *dtds_hash; /* pointer to hash table */
843 dtrace_dstate_state_t dtds_state; /* current dynamic var. state */
844 dtrace_dstate_percpu_t *dtds_percpu; /* per-CPU dyn. var. state */
848 * DTrace Variable State
850 * The DTrace variable state tracks user-defined variables in its dtrace_vstate
851 * structure. Each DTrace consumer has exactly one dtrace_vstate structure,
852 * but some dtrace_vstate structures may exist without a corresponding DTrace
853 * consumer (see "DTrace Helpers", below). As described in <sys/dtrace.h>,
854 * user-defined variables can have one of three scopes:
856 * DIFV_SCOPE_GLOBAL => global scope
857 * DIFV_SCOPE_THREAD => thread-local scope (i.e. "self->" variables)
858 * DIFV_SCOPE_LOCAL => clause-local scope (i.e. "this->" variables)
860 * The variable state tracks variables by both their scope and their allocation
863 * - The dtvs_globals and dtvs_locals members each point to an array of
864 * dtrace_statvar structures. These structures contain both the variable
865 * metadata (dtrace_difv structures) and the underlying storage for all
866 * statically allocated variables, including statically allocated
867 * DIFV_SCOPE_GLOBAL variables and all DIFV_SCOPE_LOCAL variables.
869 * - The dtvs_tlocals member points to an array of dtrace_difv structures for
870 * DIFV_SCOPE_THREAD variables. As such, this array tracks _only_ the
871 * variable metadata for DIFV_SCOPE_THREAD variables; the underlying storage
872 * is allocated out of the dynamic variable space.
874 * - The dtvs_dynvars member is the dynamic variable state associated with the
875 * variable state. The dynamic variable state (described in "DTrace Dynamic
876 * Variables", above) tracks all DIFV_SCOPE_THREAD variables and all
877 * dynamically-allocated DIFV_SCOPE_GLOBAL variables.
879 typedef struct dtrace_statvar {
880 uint64_t dtsv_data; /* data or pointer to it */
881 size_t dtsv_size; /* size of pointed-to data */
882 int dtsv_refcnt; /* reference count */
883 dtrace_difv_t dtsv_var; /* variable metadata */
886 typedef struct dtrace_vstate {
887 dtrace_state_t *dtvs_state; /* back pointer to state */
888 dtrace_statvar_t **dtvs_globals; /* statically-allocated glbls */
889 int dtvs_nglobals; /* number of globals */
890 dtrace_difv_t *dtvs_tlocals; /* thread-local metadata */
891 int dtvs_ntlocals; /* number of thread-locals */
892 dtrace_statvar_t **dtvs_locals; /* clause-local data */
893 int dtvs_nlocals; /* number of clause-locals */
894 dtrace_dstate_t dtvs_dynvars; /* dynamic variable state */
898 * DTrace Machine State
900 * In the process of processing a fired probe, DTrace needs to track and/or
901 * cache some per-CPU state associated with that particular firing. This is
902 * state that is always discarded after the probe firing has completed, and
903 * much of it is not specific to any DTrace consumer, remaining valid across
904 * all ECBs. This state is tracked in the dtrace_mstate structure.
906 #define DTRACE_MSTATE_ARGS 0x00000001
907 #define DTRACE_MSTATE_PROBE 0x00000002
908 #define DTRACE_MSTATE_EPID 0x00000004
909 #define DTRACE_MSTATE_TIMESTAMP 0x00000008
910 #define DTRACE_MSTATE_STACKDEPTH 0x00000010
911 #define DTRACE_MSTATE_CALLER 0x00000020
912 #define DTRACE_MSTATE_IPL 0x00000040
913 #define DTRACE_MSTATE_FLTOFFS 0x00000080
914 #define DTRACE_MSTATE_WALLTIMESTAMP 0x00000100
915 #define DTRACE_MSTATE_USTACKDEPTH 0x00000200
916 #define DTRACE_MSTATE_UCALLER 0x00000400
918 typedef struct dtrace_mstate {
919 uintptr_t dtms_scratch_base; /* base of scratch space */
920 uintptr_t dtms_scratch_ptr; /* current scratch pointer */
921 size_t dtms_scratch_size; /* scratch size */
922 uint32_t dtms_present; /* variables that are present */
923 uint64_t dtms_arg[5]; /* cached arguments */
924 dtrace_epid_t dtms_epid; /* current EPID */
925 uint64_t dtms_timestamp; /* cached timestamp */
926 hrtime_t dtms_walltimestamp; /* cached wall timestamp */
927 int dtms_stackdepth; /* cached stackdepth */
928 int dtms_ustackdepth; /* cached ustackdepth */
929 struct dtrace_probe *dtms_probe; /* current probe */
930 uintptr_t dtms_caller; /* cached caller */
931 uint64_t dtms_ucaller; /* cached user-level caller */
932 int dtms_ipl; /* cached interrupt pri lev */
933 int dtms_fltoffs; /* faulting DIFO offset */
934 uintptr_t dtms_strtok; /* saved strtok() pointer */
935 uint32_t dtms_access; /* memory access rights */
936 dtrace_difo_t *dtms_difo; /* current dif object */
937 file_t *dtms_getf; /* cached rval of getf() */
940 #define DTRACE_COND_OWNER 0x1
941 #define DTRACE_COND_USERMODE 0x2
942 #define DTRACE_COND_ZONEOWNER 0x4
944 #define DTRACE_PROBEKEY_MAXDEPTH 8 /* max glob recursion depth */
947 * Access flag used by dtrace_mstate.dtms_access.
949 #define DTRACE_ACCESS_KERNEL 0x1 /* the priv to read kmem */
955 * Each DTrace consumer is in one of several states, which (for purposes of
956 * avoiding yet-another overloading of the noun "state") we call the current
957 * _activity_. The activity transitions on dtrace_go() (from DTRACIOCGO), on
958 * dtrace_stop() (from DTRACIOCSTOP) and on the exit() action. Activities may
959 * only transition in one direction; the activity transition diagram is a
960 * directed acyclic graph. The activity transition diagram is as follows:
963 * +----------+ +--------+ +--------+
964 * | INACTIVE |------------------>| WARMUP |------------------>| ACTIVE |
965 * +----------+ dtrace_go(), +--------+ dtrace_go(), +--------+
966 * before BEGIN | after BEGIN | | |
968 * exit() action | | | |
969 * from BEGIN ECB | | | |
972 * +----------+ exit() action | | |
973 * +-----------------------------| DRAINING |<-------------------+ | |
976 * | dtrace_stop(), | | |
980 * | +---------+ +----------+ | |
981 * | | STOPPED |<----------------| COOLDOWN |<----------------------+ |
982 * | +---------+ dtrace_stop(), +----------+ dtrace_stop(), |
983 * | after END before END |
986 * +----------------------------->| KILLED |<--------------------------+
987 * deadman timeout or +--------+ deadman timeout or
988 * killed consumer killed consumer
990 * Note that once a DTrace consumer has stopped tracing, there is no way to
991 * restart it; if a DTrace consumer wishes to restart tracing, it must reopen
992 * the DTrace pseudodevice.
994 typedef enum dtrace_activity {
995 DTRACE_ACTIVITY_INACTIVE = 0, /* not yet running */
996 DTRACE_ACTIVITY_WARMUP, /* while starting */
997 DTRACE_ACTIVITY_ACTIVE, /* running */
998 DTRACE_ACTIVITY_DRAINING, /* before stopping */
999 DTRACE_ACTIVITY_COOLDOWN, /* while stopping */
1000 DTRACE_ACTIVITY_STOPPED, /* after stopping */
1001 DTRACE_ACTIVITY_KILLED /* killed */
1002 } dtrace_activity_t;
1005 * DTrace Helper Implementation
1007 * A description of the helper architecture may be found in <sys/dtrace.h>.
1008 * Each process contains a pointer to its helpers in its p_dtrace_helpers
1009 * member. This is a pointer to a dtrace_helpers structure, which contains an
1010 * array of pointers to dtrace_helper structures, helper variable state (shared
1011 * among a process's helpers) and a generation count. (The generation count is
1012 * used to provide an identifier when a helper is added so that it may be
1013 * subsequently removed.) The dtrace_helper structure is self-explanatory,
1014 * containing pointers to the objects needed to execute the helper. Note that
1015 * helpers are _duplicated_ across fork(2), and destroyed on exec(2). No more
1016 * than dtrace_helpers_max are allowed per-process.
1018 #define DTRACE_HELPER_ACTION_USTACK 0
1019 #define DTRACE_NHELPER_ACTIONS 1
1021 typedef struct dtrace_helper_action {
1022 int dtha_generation; /* helper action generation */
1023 int dtha_nactions; /* number of actions */
1024 dtrace_difo_t *dtha_predicate; /* helper action predicate */
1025 dtrace_difo_t **dtha_actions; /* array of actions */
1026 struct dtrace_helper_action *dtha_next; /* next helper action */
1027 } dtrace_helper_action_t;
1029 typedef struct dtrace_helper_provider {
1030 int dthp_generation; /* helper provider generation */
1031 uint32_t dthp_ref; /* reference count */
1032 dof_helper_t dthp_prov; /* DOF w/ provider and probes */
1033 } dtrace_helper_provider_t;
1035 typedef struct dtrace_helpers {
1036 dtrace_helper_action_t **dthps_actions; /* array of helper actions */
1037 dtrace_vstate_t dthps_vstate; /* helper action var. state */
1038 dtrace_helper_provider_t **dthps_provs; /* array of providers */
1039 uint_t dthps_nprovs; /* count of providers */
1040 uint_t dthps_maxprovs; /* provider array size */
1041 int dthps_generation; /* current generation */
1042 pid_t dthps_pid; /* pid of associated proc */
1043 int dthps_deferred; /* helper in deferred list */
1044 struct dtrace_helpers *dthps_next; /* next pointer */
1045 struct dtrace_helpers *dthps_prev; /* prev pointer */
1049 * DTrace Helper Action Tracing
1051 * Debugging helper actions can be arduous. To ease the development and
1052 * debugging of helpers, DTrace contains a tracing-framework-within-a-tracing-
1053 * framework: helper tracing. If dtrace_helptrace_enabled is non-zero (which
1054 * it is by default on DEBUG kernels), all helper activity will be traced to a
1055 * global, in-kernel ring buffer. Each entry includes a pointer to the specific
1056 * helper, the location within the helper, and a trace of all local variables.
1057 * The ring buffer may be displayed in a human-readable format with the
1058 * ::dtrace_helptrace mdb(1) dcmd.
1060 #define DTRACE_HELPTRACE_NEXT (-1)
1061 #define DTRACE_HELPTRACE_DONE (-2)
1062 #define DTRACE_HELPTRACE_ERR (-3)
1064 typedef struct dtrace_helptrace {
1065 dtrace_helper_action_t *dtht_helper; /* helper action */
1066 int dtht_where; /* where in helper action */
1067 int dtht_nlocals; /* number of locals */
1068 int dtht_fault; /* type of fault (if any) */
1069 int dtht_fltoffs; /* DIF offset */
1070 uint64_t dtht_illval; /* faulting value */
1071 uint64_t dtht_locals[1]; /* local variables */
1072 } dtrace_helptrace_t;
1075 * DTrace Credentials
1077 * In probe context, we have limited flexibility to examine the credentials
1078 * of the DTrace consumer that created a particular enabling. We use
1079 * the Least Privilege interfaces to cache the consumer's cred pointer and
1080 * some facts about that credential in a dtrace_cred_t structure. These
1081 * can limit the consumer's breadth of visibility and what actions the
1082 * consumer may take.
1084 #define DTRACE_CRV_ALLPROC 0x01
1085 #define DTRACE_CRV_KERNEL 0x02
1086 #define DTRACE_CRV_ALLZONE 0x04
1088 #define DTRACE_CRV_ALL (DTRACE_CRV_ALLPROC | DTRACE_CRV_KERNEL | \
1091 #define DTRACE_CRA_PROC 0x0001
1092 #define DTRACE_CRA_PROC_CONTROL 0x0002
1093 #define DTRACE_CRA_PROC_DESTRUCTIVE_ALLUSER 0x0004
1094 #define DTRACE_CRA_PROC_DESTRUCTIVE_ALLZONE 0x0008
1095 #define DTRACE_CRA_PROC_DESTRUCTIVE_CREDCHG 0x0010
1096 #define DTRACE_CRA_KERNEL 0x0020
1097 #define DTRACE_CRA_KERNEL_DESTRUCTIVE 0x0040
1099 #define DTRACE_CRA_ALL (DTRACE_CRA_PROC | \
1100 DTRACE_CRA_PROC_CONTROL | \
1101 DTRACE_CRA_PROC_DESTRUCTIVE_ALLUSER | \
1102 DTRACE_CRA_PROC_DESTRUCTIVE_ALLZONE | \
1103 DTRACE_CRA_PROC_DESTRUCTIVE_CREDCHG | \
1104 DTRACE_CRA_KERNEL | \
1105 DTRACE_CRA_KERNEL_DESTRUCTIVE)
1107 typedef struct dtrace_cred {
1109 uint8_t dcr_destructive;
1110 uint8_t dcr_visible;
1111 uint16_t dcr_action;
1115 * DTrace Consumer State
1117 * Each DTrace consumer has an associated dtrace_state structure that contains
1118 * its in-kernel DTrace state -- including options, credentials, statistics and
1119 * pointers to ECBs, buffers, speculations and formats. A dtrace_state
1120 * structure is also allocated for anonymous enablings. When anonymous state
1121 * is grabbed, the grabbing consumers dts_anon pointer is set to the grabbed
1122 * dtrace_state structure.
1124 struct dtrace_state {
1126 dev_t dts_dev; /* device */
1128 struct cdev *dts_dev; /* device */
1130 int dts_necbs; /* total number of ECBs */
1131 dtrace_ecb_t **dts_ecbs; /* array of ECBs */
1132 dtrace_epid_t dts_epid; /* next EPID to allocate */
1133 size_t dts_needed; /* greatest needed space */
1134 struct dtrace_state *dts_anon; /* anon. state, if grabbed */
1135 dtrace_activity_t dts_activity; /* current activity */
1136 dtrace_vstate_t dts_vstate; /* variable state */
1137 dtrace_buffer_t *dts_buffer; /* principal buffer */
1138 dtrace_buffer_t *dts_aggbuffer; /* aggregation buffer */
1139 dtrace_speculation_t *dts_speculations; /* speculation array */
1140 int dts_nspeculations; /* number of speculations */
1141 int dts_naggregations; /* number of aggregations */
1142 dtrace_aggregation_t **dts_aggregations; /* aggregation array */
1144 vmem_t *dts_aggid_arena; /* arena for aggregation IDs */
1146 struct unrhdr *dts_aggid_arena; /* arena for aggregation IDs */
1148 uint64_t dts_errors; /* total number of errors */
1149 uint32_t dts_speculations_busy; /* number of spec. busy */
1150 uint32_t dts_speculations_unavail; /* number of spec unavail */
1151 uint32_t dts_stkstroverflows; /* stack string tab overflows */
1152 uint32_t dts_dblerrors; /* errors in ERROR probes */
1153 uint32_t dts_reserve; /* space reserved for END */
1154 hrtime_t dts_laststatus; /* time of last status */
1156 cyclic_id_t dts_cleaner; /* cleaning cyclic */
1157 cyclic_id_t dts_deadman; /* deadman cyclic */
1159 struct callout dts_cleaner; /* Cleaning callout. */
1160 struct callout dts_deadman; /* Deadman callout. */
1162 hrtime_t dts_alive; /* time last alive */
1163 char dts_speculates; /* boolean: has speculations */
1164 char dts_destructive; /* boolean: has dest. actions */
1165 int dts_nformats; /* number of formats */
1166 char **dts_formats; /* format string array */
1167 dtrace_optval_t dts_options[DTRACEOPT_MAX]; /* options */
1168 dtrace_cred_t dts_cred; /* credentials */
1169 size_t dts_nretained; /* number of retained enabs */
1170 int dts_getf; /* number of getf() calls */
1173 struct dtrace_provider {
1174 dtrace_pattr_t dtpv_attr; /* provider attributes */
1175 dtrace_ppriv_t dtpv_priv; /* provider privileges */
1176 dtrace_pops_t dtpv_pops; /* provider operations */
1177 char *dtpv_name; /* provider name */
1178 void *dtpv_arg; /* provider argument */
1179 hrtime_t dtpv_defunct; /* when made defunct */
1180 struct dtrace_provider *dtpv_next; /* next provider */
1183 struct dtrace_meta {
1184 dtrace_mops_t dtm_mops; /* meta provider operations */
1185 char *dtm_name; /* meta provider name */
1186 void *dtm_arg; /* meta provider user arg */
1187 uint64_t dtm_count; /* no. of associated provs. */
1193 * A dtrace_enabling structure is used to track a collection of ECB
1194 * descriptions -- before they have been turned into actual ECBs. This is
1195 * created as a result of DOF processing, and is generally used to generate
1196 * ECBs immediately thereafter. However, enablings are also generally
1197 * retained should the probes they describe be created at a later time; as
1198 * each new module or provider registers with the framework, the retained
1199 * enablings are reevaluated, with any new match resulting in new ECBs. To
1200 * prevent probes from being matched more than once, the enabling tracks the
1201 * last probe generation matched, and only matches probes from subsequent
1204 typedef struct dtrace_enabling {
1205 dtrace_ecbdesc_t **dten_desc; /* all ECB descriptions */
1206 int dten_ndesc; /* number of ECB descriptions */
1207 int dten_maxdesc; /* size of ECB array */
1208 dtrace_vstate_t *dten_vstate; /* associated variable state */
1209 dtrace_genid_t dten_probegen; /* matched probe generation */
1210 dtrace_ecbdesc_t *dten_current; /* current ECB description */
1211 int dten_error; /* current error value */
1212 int dten_primed; /* boolean: set if primed */
1213 struct dtrace_enabling *dten_prev; /* previous enabling */
1214 struct dtrace_enabling *dten_next; /* next enabling */
1215 } dtrace_enabling_t;
1218 * DTrace Anonymous Enablings
1220 * Anonymous enablings are DTrace enablings that are not associated with a
1221 * controlling process, but rather derive their enabling from DOF stored as
1222 * properties in the dtrace.conf file. If there is an anonymous enabling, a
1223 * DTrace consumer state and enabling are created on attach. The state may be
1224 * subsequently grabbed by the first consumer specifying the "grabanon"
1225 * option. As long as an anonymous DTrace enabling exists, dtrace(7D) will
1228 typedef struct dtrace_anon {
1229 dtrace_state_t *dta_state; /* DTrace consumer state */
1230 dtrace_enabling_t *dta_enabling; /* pointer to enabling */
1231 processorid_t dta_beganon; /* which CPU BEGIN ran on */
1235 * DTrace Error Debugging
1238 #define DTRACE_ERRDEBUG
1241 #ifdef DTRACE_ERRDEBUG
1243 typedef struct dtrace_errhash {
1244 const char *dter_msg; /* error message */
1245 int dter_count; /* number of times seen */
1248 #define DTRACE_ERRHASHSZ 256 /* must be > number of err msgs */
1250 #endif /* DTRACE_ERRDEBUG */
1253 * DTrace Toxic Ranges
1255 * DTrace supports safe loads from probe context; if the address turns out to
1256 * be invalid, a bit will be set by the kernel indicating that DTrace
1257 * encountered a memory error, and DTrace will propagate the error to the user
1258 * accordingly. However, there may exist some regions of memory in which an
1259 * arbitrary load can change system state, and from which it is impossible to
1260 * recover from such a load after it has been attempted. Examples of this may
1261 * include memory in which programmable I/O registers are mapped (for which a
1262 * read may have some implications for the device) or (in the specific case of
1263 * UltraSPARC-I and -II) the virtual address hole. The platform is required
1264 * to make DTrace aware of these toxic ranges; DTrace will then check that
1265 * target addresses are not in a toxic range before attempting to issue a
1268 typedef struct dtrace_toxrange {
1269 uintptr_t dtt_base; /* base of toxic range */
1270 uintptr_t dtt_limit; /* limit of toxic range */
1271 } dtrace_toxrange_t;
1274 extern uint64_t dtrace_getarg(int, int);
1276 extern uint64_t __noinline dtrace_getarg(int, int);
1278 extern greg_t dtrace_getfp(void);
1279 extern int dtrace_getipl(void);
1280 extern uintptr_t dtrace_caller(int);
1281 extern uint32_t dtrace_cas32(uint32_t *, uint32_t, uint32_t);
1282 extern void *dtrace_casptr(volatile void *, volatile void *, volatile void *);
1283 extern void dtrace_copyin(uintptr_t, uintptr_t, size_t, volatile uint16_t *);
1284 extern void dtrace_copyinstr(uintptr_t, uintptr_t, size_t, volatile uint16_t *);
1285 extern void dtrace_copyout(uintptr_t, uintptr_t, size_t, volatile uint16_t *);
1286 extern void dtrace_copyoutstr(uintptr_t, uintptr_t, size_t,
1287 volatile uint16_t *);
1288 extern void dtrace_getpcstack(pc_t *, int, int, uint32_t *);
1289 extern ulong_t dtrace_getreg(struct trapframe *, uint_t);
1290 extern int dtrace_getstackdepth(int);
1291 extern void dtrace_getupcstack(uint64_t *, int);
1292 extern void dtrace_getufpstack(uint64_t *, uint64_t *, int);
1293 extern int dtrace_getustackdepth(void);
1294 extern uintptr_t dtrace_fulword(void *);
1295 extern uint8_t dtrace_fuword8(void *);
1296 extern uint16_t dtrace_fuword16(void *);
1297 extern uint32_t dtrace_fuword32(void *);
1298 extern uint64_t dtrace_fuword64(void *);
1299 extern void dtrace_probe_error(dtrace_state_t *, dtrace_epid_t, int, int,
1301 extern int dtrace_assfail(const char *, const char *, int);
1302 extern int dtrace_attached(void);
1304 extern hrtime_t dtrace_gethrestime(void);
1308 extern void dtrace_flush_windows(void);
1309 extern void dtrace_flush_user_windows(void);
1310 extern uint_t dtrace_getotherwin(void);
1311 extern uint_t dtrace_getfprs(void);
1313 extern void dtrace_copy(uintptr_t, uintptr_t, size_t);
1314 extern void dtrace_copystr(uintptr_t, uintptr_t, size_t, volatile uint16_t *);
1320 * DTrace calls ASSERT and VERIFY from probe context. To assure that a failed
1321 * ASSERT or VERIFY does not induce a markedly more catastrophic failure (e.g.,
1322 * one from which a dump cannot be gleaned), DTrace must define its own ASSERT
1323 * and VERIFY macros to be ones that may safely be called from probe context.
1324 * This header file must thus be included by any DTrace component that calls
1325 * ASSERT and/or VERIFY from probe context, and _only_ by those components.
1326 * (The only exception to this is kernel debugging infrastructure at user-level
1327 * that doesn't depend on calling ASSERT.)
1331 #define VERIFY(EX) ((void)((EX) || \
1332 dtrace_assfail(#EX, __FILE__, __LINE__)))
1334 #define ASSERT(EX) ((void)((EX) || \
1335 dtrace_assfail(#EX, __FILE__, __LINE__)))
1337 #define ASSERT(X) ((void)0)
1344 #endif /* _SYS_DTRACE_IMPL_H */