4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
25 * Copyright 2007 Sun Microsystems, Inc. All rights reserved.
26 * Use is subject to license terms.
30 * Copyright 2016 Joyent, Inc.
31 * Copyright (c) 2012 by Delphix. All rights reserved.
34 #ifndef _SYS_DTRACE_IMPL_H
35 #define _SYS_DTRACE_IMPL_H
42 * DTrace Dynamic Tracing Software: Kernel Implementation Interfaces
44 * Note: The contents of this file are private to the implementation of the
45 * Solaris system and DTrace subsystem and are subject to change at any time
46 * without notice. Applications and drivers using these interfaces will fail
47 * to run on future releases. These interfaces should not be used for any
48 * purpose except those expressly outlined in dtrace(7D) and libdtrace(3LIB).
49 * Please refer to the "Solaris Dynamic Tracing Guide" for more information.
52 #include <sys/dtrace.h>
56 typedef uint32_t pc_t;
58 typedef uintptr_t pc_t;
60 typedef u_long greg_t;
64 * DTrace Implementation Constants and Typedefs
66 #define DTRACE_MAXPROPLEN 128
67 #define DTRACE_DYNVAR_CHUNKSIZE 256
71 #endif /* __FreeBSD__ */
75 struct dtrace_predicate;
77 struct dtrace_provider;
80 typedef struct dtrace_probe dtrace_probe_t;
81 typedef struct dtrace_ecb dtrace_ecb_t;
82 typedef struct dtrace_predicate dtrace_predicate_t;
83 typedef struct dtrace_action dtrace_action_t;
84 typedef struct dtrace_provider dtrace_provider_t;
85 typedef struct dtrace_meta dtrace_meta_t;
86 typedef struct dtrace_state dtrace_state_t;
87 typedef uint32_t dtrace_optid_t;
88 typedef uint32_t dtrace_specid_t;
89 typedef uint64_t dtrace_genid_t;
94 * The probe is the fundamental unit of the DTrace architecture. Probes are
95 * created by DTrace providers, and managed by the DTrace framework. A probe
96 * is identified by a unique <provider, module, function, name> tuple, and has
97 * a unique probe identifier assigned to it. (Some probes are not associated
98 * with a specific point in text; these are called _unanchored probes_ and have
99 * no module or function associated with them.) Probes are represented as a
100 * dtrace_probe structure. To allow quick lookups based on each element of the
101 * probe tuple, probes are hashed by each of provider, module, function and
102 * name. (If a lookup is performed based on a regular expression, a
103 * dtrace_probekey is prepared, and a linear search is performed.) Each probe
104 * is additionally pointed to by a linear array indexed by its identifier. The
105 * identifier is the provider's mechanism for indicating to the DTrace
106 * framework that a probe has fired: the identifier is passed as the first
107 * argument to dtrace_probe(), where it is then mapped into the corresponding
108 * dtrace_probe structure. From the dtrace_probe structure, dtrace_probe() can
109 * iterate over the probe's list of enabling control blocks; see "DTrace
110 * Enabling Control Blocks", below.)
112 struct dtrace_probe {
113 dtrace_id_t dtpr_id; /* probe identifier */
114 dtrace_ecb_t *dtpr_ecb; /* ECB list; see below */
115 dtrace_ecb_t *dtpr_ecb_last; /* last ECB in list */
116 void *dtpr_arg; /* provider argument */
117 dtrace_cacheid_t dtpr_predcache; /* predicate cache ID */
118 int dtpr_aframes; /* artificial frames */
119 dtrace_provider_t *dtpr_provider; /* pointer to provider */
120 char *dtpr_mod; /* probe's module name */
121 char *dtpr_func; /* probe's function name */
122 char *dtpr_name; /* probe's name */
123 dtrace_probe_t *dtpr_nextmod; /* next in module hash */
124 dtrace_probe_t *dtpr_prevmod; /* previous in module hash */
125 dtrace_probe_t *dtpr_nextfunc; /* next in function hash */
126 dtrace_probe_t *dtpr_prevfunc; /* previous in function hash */
127 dtrace_probe_t *dtpr_nextname; /* next in name hash */
128 dtrace_probe_t *dtpr_prevname; /* previous in name hash */
129 dtrace_genid_t dtpr_gen; /* probe generation ID */
132 typedef int dtrace_probekey_f(const char *, const char *, int);
134 typedef struct dtrace_probekey {
135 char *dtpk_prov; /* provider name to match */
136 dtrace_probekey_f *dtpk_pmatch; /* provider matching function */
137 char *dtpk_mod; /* module name to match */
138 dtrace_probekey_f *dtpk_mmatch; /* module matching function */
139 char *dtpk_func; /* func name to match */
140 dtrace_probekey_f *dtpk_fmatch; /* func matching function */
141 char *dtpk_name; /* name to match */
142 dtrace_probekey_f *dtpk_nmatch; /* name matching function */
143 dtrace_id_t dtpk_id; /* identifier to match */
146 typedef struct dtrace_hashbucket {
147 struct dtrace_hashbucket *dthb_next; /* next on hash chain */
148 dtrace_probe_t *dthb_chain; /* chain of probes */
149 int dthb_len; /* number of probes here */
150 } dtrace_hashbucket_t;
152 typedef struct dtrace_hash {
153 dtrace_hashbucket_t **dth_tab; /* hash table */
154 int dth_size; /* size of hash table */
155 int dth_mask; /* mask to index into table */
156 int dth_nbuckets; /* total number of buckets */
157 uintptr_t dth_nextoffs; /* offset of next in probe */
158 uintptr_t dth_prevoffs; /* offset of prev in probe */
159 uintptr_t dth_stroffs; /* offset of str in probe */
163 * DTrace Enabling Control Blocks
165 * When a provider wishes to fire a probe, it calls into dtrace_probe(),
166 * passing the probe identifier as the first argument. As described above,
167 * dtrace_probe() maps the identifier into a pointer to a dtrace_probe_t
168 * structure. This structure contains information about the probe, and a
169 * pointer to the list of Enabling Control Blocks (ECBs). Each ECB points to
170 * DTrace consumer state, and contains an optional predicate, and a list of
171 * actions. (Shown schematically below.) The ECB abstraction allows a single
172 * probe to be multiplexed across disjoint consumers, or across disjoint
173 * enablings of a single probe within one consumer.
175 * Enabling Control Block
177 * +------------------------+
178 * | dtrace_epid_t ---------+--------------> Enabled Probe ID (EPID)
179 * | dtrace_state_t * ------+--------------> State associated with this ECB
180 * | dtrace_predicate_t * --+---------+
181 * | dtrace_action_t * -----+----+ |
182 * | dtrace_ecb_t * ---+ | | | Predicate (if any)
183 * +-------------------+----+ | | dtrace_predicate_t
184 * | | +---> +--------------------+
185 * | | | dtrace_difo_t * ---+----> DIFO
186 * | | +--------------------+
188 * Next ECB | | Action
189 * (if any) | | dtrace_action_t
190 * : +--> +-------------------+
191 * : | dtrace_actkind_t -+------> kind
192 * v | dtrace_difo_t * --+------> DIFO (if any)
193 * | dtrace_recdesc_t -+------> record descr.
194 * | dtrace_action_t * +------+
195 * +-------------------+ |
197 * +-------------------------------+ (if any)
201 * +--> +-------------------+
202 * | dtrace_actkind_t -+------> kind
203 * | dtrace_difo_t * --+------> DIFO (if any)
204 * | dtrace_action_t * +------+
205 * +-------------------+ |
207 * +-------------------------------+ (if any)
213 * dtrace_probe() iterates over the ECB list. If the ECB needs less space
214 * than is available in the principal buffer, the ECB is processed: if the
215 * predicate is non-NULL, the DIF object is executed. If the result is
216 * non-zero, the action list is processed, with each action being executed
217 * accordingly. When the action list has been completely executed, processing
218 * advances to the next ECB. The ECB abstraction allows disjoint consumers
219 * to multiplex on single probes.
221 * Execution of the ECB results in consuming dte_size bytes in the buffer
222 * to record data. During execution, dte_needed bytes must be available in
223 * the buffer. This space is used for both recorded data and tuple data.
226 dtrace_epid_t dte_epid; /* enabled probe ID */
227 uint32_t dte_alignment; /* required alignment */
228 size_t dte_needed; /* space needed for execution */
229 size_t dte_size; /* size of recorded payload */
230 dtrace_predicate_t *dte_predicate; /* predicate, if any */
231 dtrace_action_t *dte_action; /* actions, if any */
232 dtrace_ecb_t *dte_next; /* next ECB on probe */
233 dtrace_state_t *dte_state; /* pointer to state */
234 uint32_t dte_cond; /* security condition */
235 dtrace_probe_t *dte_probe; /* pointer to probe */
236 dtrace_action_t *dte_action_last; /* last action on ECB */
237 uint64_t dte_uarg; /* library argument */
240 struct dtrace_predicate {
241 dtrace_difo_t *dtp_difo; /* DIF object */
242 dtrace_cacheid_t dtp_cacheid; /* cache identifier */
243 int dtp_refcnt; /* reference count */
246 struct dtrace_action {
247 dtrace_actkind_t dta_kind; /* kind of action */
248 uint16_t dta_intuple; /* boolean: in aggregation */
249 uint32_t dta_refcnt; /* reference count */
250 dtrace_difo_t *dta_difo; /* pointer to DIFO */
251 dtrace_recdesc_t dta_rec; /* record description */
252 dtrace_action_t *dta_prev; /* previous action */
253 dtrace_action_t *dta_next; /* next action */
256 typedef struct dtrace_aggregation {
257 dtrace_action_t dtag_action; /* action; must be first */
258 dtrace_aggid_t dtag_id; /* identifier */
259 dtrace_ecb_t *dtag_ecb; /* corresponding ECB */
260 dtrace_action_t *dtag_first; /* first action in tuple */
261 uint32_t dtag_base; /* base of aggregation */
262 uint8_t dtag_hasarg; /* boolean: has argument */
263 uint64_t dtag_initial; /* initial value */
264 void (*dtag_aggregate)(uint64_t *, uint64_t, uint64_t);
265 } dtrace_aggregation_t;
270 * Principal buffers, aggregation buffers, and speculative buffers are all
271 * managed with the dtrace_buffer structure. By default, this structure
272 * includes twin data buffers -- dtb_tomax and dtb_xamot -- that serve as the
273 * active and passive buffers, respectively. For speculative buffers,
274 * dtb_xamot will be NULL; for "ring" and "fill" buffers, dtb_xamot will point
275 * to a scratch buffer. For all buffer types, the dtrace_buffer structure is
276 * always allocated on a per-CPU basis; a single dtrace_buffer structure is
277 * never shared among CPUs. (That is, there is never true sharing of the
278 * dtrace_buffer structure; to prevent false sharing of the structure, it must
279 * always be aligned to the coherence granularity -- generally 64 bytes.)
281 * One of the critical design decisions of DTrace is that a given ECB always
282 * stores the same quantity and type of data. This is done to assure that the
283 * only metadata required for an ECB's traced data is the EPID. That is, from
284 * the EPID, the consumer can determine the data layout. (The data buffer
285 * layout is shown schematically below.) By assuring that one can determine
286 * data layout from the EPID, the metadata stream can be separated from the
287 * data stream -- simplifying the data stream enormously. The ECB always
288 * proceeds the recorded data as part of the dtrace_rechdr_t structure that
289 * includes the EPID and a high-resolution timestamp used for output ordering
292 * base of data buffer ---> +--------+--------------------+--------+
293 * | rechdr | data | rechdr |
294 * +--------+------+--------+----+--------+
295 * | data | rechdr | data |
296 * +---------------+--------+-------------+
298 * +--------+--------------------+--------+
299 * | rechdr | data | |
300 * +--------+--------------------+ |
310 * limit of data buffer ---> +--------------------------------------+
312 * When evaluating an ECB, dtrace_probe() determines if the ECB's needs of the
313 * principal buffer (both scratch and payload) exceed the available space. If
314 * the ECB's needs exceed available space (and if the principal buffer policy
315 * is the default "switch" policy), the ECB is dropped, the buffer's drop count
316 * is incremented, and processing advances to the next ECB. If the ECB's needs
317 * can be met with the available space, the ECB is processed, but the offset in
318 * the principal buffer is only advanced if the ECB completes processing
321 * When a buffer is to be switched (either because the buffer is the principal
322 * buffer with a "switch" policy or because it is an aggregation buffer), a
323 * cross call is issued to the CPU associated with the buffer. In the cross
324 * call context, interrupts are disabled, and the active and the inactive
325 * buffers are atomically switched. This involves switching the data pointers,
326 * copying the various state fields (offset, drops, errors, etc.) into their
327 * inactive equivalents, and clearing the state fields. Because interrupts are
328 * disabled during this procedure, the switch is guaranteed to appear atomic to
331 * DTrace Ring Buffering
333 * To process a ring buffer correctly, one must know the oldest valid record.
334 * Processing starts at the oldest record in the buffer and continues until
335 * the end of the buffer is reached. Processing then resumes starting with
336 * the record stored at offset 0 in the buffer, and continues until the
337 * youngest record is processed. If trace records are of a fixed-length,
338 * determining the oldest record is trivial:
340 * - If the ring buffer has not wrapped, the oldest record is the record
341 * stored at offset 0.
343 * - If the ring buffer has wrapped, the oldest record is the record stored
344 * at the current offset.
346 * With variable length records, however, just knowing the current offset
347 * doesn't suffice for determining the oldest valid record: assuming that one
348 * allows for arbitrary data, one has no way of searching forward from the
349 * current offset to find the oldest valid record. (That is, one has no way
350 * of separating data from metadata.) It would be possible to simply refuse to
351 * process any data in the ring buffer between the current offset and the
352 * limit, but this leaves (potentially) an enormous amount of otherwise valid
355 * To effect ring buffering, we track two offsets in the buffer: the current
356 * offset and the _wrapped_ offset. If a request is made to reserve some
357 * amount of data, and the buffer has wrapped, the wrapped offset is
358 * incremented until the wrapped offset minus the current offset is greater
359 * than or equal to the reserve request. This is done by repeatedly looking
360 * up the ECB corresponding to the EPID at the current wrapped offset, and
361 * incrementing the wrapped offset by the size of the data payload
362 * corresponding to that ECB. If this offset is greater than or equal to the
363 * limit of the data buffer, the wrapped offset is set to 0. Thus, the
364 * current offset effectively "chases" the wrapped offset around the buffer.
367 * base of data buffer ---> +------+--------------------+------+
368 * | EPID | data | EPID |
369 * +------+--------+------+----+------+
370 * | data | EPID | data |
371 * +---------------+------+-----------+
373 * +------+---------------------------+
375 * current offset ---> +------+---------------------------+
377 * wrapped offset ---> +------+--------------------+------+
378 * | EPID | data | EPID |
379 * +------+--------+------+----+------+
380 * | data | EPID | data |
381 * +---------------+------+-----------+
384 * . ... valid data ... .
387 * +------+-------------+------+------+
388 * | EPID | data | EPID | data |
389 * +------+------------++------+------+
390 * | data, cont. | leftover |
391 * limit of data buffer ---> +-------------------+--------------+
393 * If the amount of requested buffer space exceeds the amount of space
394 * available between the current offset and the end of the buffer:
396 * (1) all words in the data buffer between the current offset and the limit
397 * of the data buffer (marked "leftover", above) are set to
400 * (2) the wrapped offset is set to zero
402 * (3) the iteration process described above occurs until the wrapped offset
403 * is greater than the amount of desired space.
405 * The wrapped offset is implemented by (re-)using the inactive offset.
406 * In a "switch" buffer policy, the inactive offset stores the offset in
407 * the inactive buffer; in a "ring" buffer policy, it stores the wrapped
410 * DTrace Scratch Buffering
412 * Some ECBs may wish to allocate dynamically-sized temporary scratch memory.
413 * To accommodate such requests easily, scratch memory may be allocated in
414 * the buffer beyond the current offset plus the needed memory of the current
415 * ECB. If there isn't sufficient room in the buffer for the requested amount
416 * of scratch space, the allocation fails and an error is generated. Scratch
417 * memory is tracked in the dtrace_mstate_t and is automatically freed when
418 * the ECB ceases processing. Note that ring buffers cannot allocate their
419 * scratch from the principal buffer -- lest they needlessly overwrite older,
420 * valid data. Ring buffers therefore have their own dedicated scratch buffer
421 * from which scratch is allocated.
423 #define DTRACEBUF_RING 0x0001 /* bufpolicy set to "ring" */
424 #define DTRACEBUF_FILL 0x0002 /* bufpolicy set to "fill" */
425 #define DTRACEBUF_NOSWITCH 0x0004 /* do not switch buffer */
426 #define DTRACEBUF_WRAPPED 0x0008 /* ring buffer has wrapped */
427 #define DTRACEBUF_DROPPED 0x0010 /* drops occurred */
428 #define DTRACEBUF_ERROR 0x0020 /* errors occurred */
429 #define DTRACEBUF_FULL 0x0040 /* "fill" buffer is full */
430 #define DTRACEBUF_CONSUMED 0x0080 /* buffer has been consumed */
431 #define DTRACEBUF_INACTIVE 0x0100 /* buffer is not yet active */
433 typedef struct dtrace_buffer {
434 uint64_t dtb_offset; /* current offset in buffer */
435 uint64_t dtb_size; /* size of buffer */
436 uint32_t dtb_flags; /* flags */
437 uint32_t dtb_drops; /* number of drops */
438 caddr_t dtb_tomax; /* active buffer */
439 caddr_t dtb_xamot; /* inactive buffer */
440 uint32_t dtb_xamot_flags; /* inactive flags */
441 uint32_t dtb_xamot_drops; /* drops in inactive buffer */
442 uint64_t dtb_xamot_offset; /* offset in inactive buffer */
443 uint32_t dtb_errors; /* number of errors */
444 uint32_t dtb_xamot_errors; /* errors in inactive buffer */
446 uint64_t dtb_pad1; /* pad out to 64 bytes */
448 uint64_t dtb_switched; /* time of last switch */
449 uint64_t dtb_interval; /* observed switch interval */
450 uint64_t dtb_pad2[6]; /* pad to avoid false sharing */
454 * DTrace Aggregation Buffers
456 * Aggregation buffers use much of the same mechanism as described above
457 * ("DTrace Buffers"). However, because an aggregation is fundamentally a
458 * hash, there exists dynamic metadata associated with an aggregation buffer
459 * that is not associated with other kinds of buffers. This aggregation
460 * metadata is _only_ relevant for the in-kernel implementation of
461 * aggregations; it is not actually relevant to user-level consumers. To do
462 * this, we allocate dynamic aggregation data (hash keys and hash buckets)
463 * starting below the _limit_ of the buffer, and we allocate data from the
464 * _base_ of the buffer. When the aggregation buffer is copied out, _only_ the
465 * data is copied out; the metadata is simply discarded. Schematically,
466 * aggregation buffers look like:
468 * base of data buffer ---> +-------+------+-----------+-------+
469 * | aggid | key | value | aggid |
470 * +-------+------+-----------+-------+
472 * +-------+-------+-----+------------+
473 * | value | aggid | key | value |
474 * +-------+------++-----+------+-----+
475 * | aggid | key | value | |
476 * +-------+------+-------------+ |
486 * | || +------------+
488 * +---------------------+ |
490 * | (dtrace_aggkey structures) |
492 * +----------------------------------+
494 * | (dtrace_aggbuffer structure) |
496 * limit of data buffer ---> +----------------------------------+
499 * As implied above, just as we assure that ECBs always store a constant
500 * amount of data, we assure that a given aggregation -- identified by its
501 * aggregation ID -- always stores data of a constant quantity and type.
502 * As with EPIDs, this allows the aggregation ID to serve as the metadata for a
505 * Note that the size of the dtrace_aggkey structure must be sizeof (uintptr_t)
506 * aligned. (If this the structure changes such that this becomes false, an
507 * assertion will fail in dtrace_aggregate().)
509 typedef struct dtrace_aggkey {
510 uint32_t dtak_hashval; /* hash value */
511 uint32_t dtak_action:4; /* action -- 4 bits */
512 uint32_t dtak_size:28; /* size -- 28 bits */
513 caddr_t dtak_data; /* data pointer */
514 struct dtrace_aggkey *dtak_next; /* next in hash chain */
517 typedef struct dtrace_aggbuffer {
518 uintptr_t dtagb_hashsize; /* number of buckets */
519 uintptr_t dtagb_free; /* free list of keys */
520 dtrace_aggkey_t **dtagb_hash; /* hash table */
521 } dtrace_aggbuffer_t;
524 * DTrace Speculations
526 * Speculations have a per-CPU buffer and a global state. Once a speculation
527 * buffer has been comitted or discarded, it cannot be reused until all CPUs
528 * have taken the same action (commit or discard) on their respective
529 * speculative buffer. However, because DTrace probes may execute in arbitrary
530 * context, other CPUs cannot simply be cross-called at probe firing time to
531 * perform the necessary commit or discard. The speculation states thus
532 * optimize for the case that a speculative buffer is only active on one CPU at
533 * the time of a commit() or discard() -- for if this is the case, other CPUs
534 * need not take action, and the speculation is immediately available for
535 * reuse. If the speculation is active on multiple CPUs, it must be
536 * asynchronously cleaned -- potentially leading to a higher rate of dirty
537 * speculative drops. The speculation states are as follows:
539 * DTRACESPEC_INACTIVE <= Initial state; inactive speculation
540 * DTRACESPEC_ACTIVE <= Allocated, but not yet speculatively traced to
541 * DTRACESPEC_ACTIVEONE <= Speculatively traced to on one CPU
542 * DTRACESPEC_ACTIVEMANY <= Speculatively traced to on more than one CPU
543 * DTRACESPEC_COMMITTING <= Currently being commited on one CPU
544 * DTRACESPEC_COMMITTINGMANY <= Currently being commited on many CPUs
545 * DTRACESPEC_DISCARDING <= Currently being discarded on many CPUs
547 * The state transition diagram is as follows:
549 * +----------------------------------------------------------+
552 * | +-------------------| COMMITTING |<-----------------+ |
553 * | | +------------+ | |
554 * | | copied spec. ^ commit() on | | discard() on
555 * | | into principal | active CPU | | active CPU
558 * +----------+ +--------+ +-----------+
559 * | INACTIVE |---------------->| ACTIVE |--------------->| ACTIVEONE |
560 * +----------+ speculation() +--------+ speculate() +-----------+
562 * | | | discard() | |
563 * | | asynchronously | discard() on | | speculate()
564 * | | cleaned V inactive CPU | | on inactive
565 * | | +------------+ | | CPU
566 * | +-------------------| DISCARDING |<-----------------+ |
568 * | asynchronously ^ |
569 * | copied spec. | discard() |
570 * | into principal +------------------------+ |
572 * +----------------+ commit() +------------+
573 * | COMMITTINGMANY |<----------------------------------| ACTIVEMANY |
574 * +----------------+ +------------+
576 typedef enum dtrace_speculation_state {
577 DTRACESPEC_INACTIVE = 0,
579 DTRACESPEC_ACTIVEONE,
580 DTRACESPEC_ACTIVEMANY,
581 DTRACESPEC_COMMITTING,
582 DTRACESPEC_COMMITTINGMANY,
583 DTRACESPEC_DISCARDING
584 } dtrace_speculation_state_t;
586 typedef struct dtrace_speculation {
587 dtrace_speculation_state_t dtsp_state; /* current speculation state */
588 int dtsp_cleaning; /* non-zero if being cleaned */
589 dtrace_buffer_t *dtsp_buffer; /* speculative buffer */
590 } dtrace_speculation_t;
593 * DTrace Dynamic Variables
595 * The dynamic variable problem is obviously decomposed into two subproblems:
596 * allocating new dynamic storage, and freeing old dynamic storage. The
597 * presence of the second problem makes the first much more complicated -- or
598 * rather, the absence of the second renders the first trivial. This is the
599 * case with aggregations, for which there is effectively no deallocation of
600 * dynamic storage. (Or more accurately, all dynamic storage is deallocated
601 * when a snapshot is taken of the aggregation.) As DTrace dynamic variables
602 * allow for both dynamic allocation and dynamic deallocation, the
603 * implementation of dynamic variables is quite a bit more complicated than
604 * that of their aggregation kin.
606 * We observe that allocating new dynamic storage is tricky only because the
607 * size can vary -- the allocation problem is much easier if allocation sizes
608 * are uniform. We further observe that in D, the size of dynamic variables is
609 * actually _not_ dynamic -- dynamic variable sizes may be determined by static
610 * analysis of DIF text. (This is true even of putatively dynamically-sized
611 * objects like strings and stacks, the sizes of which are dictated by the
612 * "stringsize" and "stackframes" variables, respectively.) We exploit this by
613 * performing this analysis on all DIF before enabling any probes. For each
614 * dynamic load or store, we calculate the dynamically-allocated size plus the
615 * size of the dtrace_dynvar structure plus the storage required to key the
616 * data. For all DIF, we take the largest value and dub it the _chunksize_.
617 * We then divide dynamic memory into two parts: a hash table that is wide
618 * enough to have every chunk in its own bucket, and a larger region of equal
619 * chunksize units. Whenever we wish to dynamically allocate a variable, we
620 * always allocate a single chunk of memory. Depending on the uniformity of
621 * allocation, this will waste some amount of memory -- but it eliminates the
622 * non-determinism inherent in traditional heap fragmentation.
624 * Dynamic objects are allocated by storing a non-zero value to them; they are
625 * deallocated by storing a zero value to them. Dynamic variables are
626 * complicated enormously by being shared between CPUs. In particular,
627 * consider the following scenario:
630 * +---------------------------------+ +---------------------------------+
632 * | allocates dynamic object a[123] | | |
633 * | by storing the value 345 to it | | |
635 * | | | wishing to load from object |
636 * | | | a[123], performs lookup in |
637 * | | | dynamic variable space |
639 * | deallocates object a[123] by | | |
640 * | storing 0 to it | | |
642 * | allocates dynamic object b[567] | | performs load from a[123] |
643 * | by storing the value 789 to it | | |
647 * This is obviously a race in the D program, but there are nonetheless only
648 * two valid values for CPU B's load from a[123]: 345 or 0. Most importantly,
649 * CPU B may _not_ see the value 789 for a[123].
651 * There are essentially two ways to deal with this:
653 * (1) Explicitly spin-lock variables. That is, if CPU B wishes to load
654 * from a[123], it needs to lock a[123] and hold the lock for the
655 * duration that it wishes to manipulate it.
657 * (2) Avoid reusing freed chunks until it is known that no CPU is referring
660 * The implementation of (1) is rife with complexity, because it requires the
661 * user of a dynamic variable to explicitly decree when they are done using it.
662 * Were all variables by value, this perhaps wouldn't be debilitating -- but
663 * dynamic variables of non-scalar types are tracked by reference. That is, if
664 * a dynamic variable is, say, a string, and that variable is to be traced to,
665 * say, the principal buffer, the DIF emulation code returns to the main
666 * dtrace_probe() loop a pointer to the underlying storage, not the contents of
667 * the storage. Further, code calling on DIF emulation would have to be aware
668 * that the DIF emulation has returned a reference to a dynamic variable that
669 * has been potentially locked. The variable would have to be unlocked after
670 * the main dtrace_probe() loop is finished with the variable, and the main
671 * dtrace_probe() loop would have to be careful to not call any further DIF
672 * emulation while the variable is locked to avoid deadlock. More generally,
673 * if one were to implement (1), DIF emulation code dealing with dynamic
674 * variables could only deal with one dynamic variable at a time (lest deadlock
675 * result). To sum, (1) exports too much subtlety to the users of dynamic
676 * variables -- increasing maintenance burden and imposing serious constraints
677 * on future DTrace development.
679 * The implementation of (2) is also complex, but the complexity is more
680 * manageable. We need to be sure that when a variable is deallocated, it is
681 * not placed on a traditional free list, but rather on a _dirty_ list. Once a
682 * variable is on a dirty list, it cannot be found by CPUs performing a
683 * subsequent lookup of the variable -- but it may still be in use by other
684 * CPUs. To assure that all CPUs that may be seeing the old variable have
685 * cleared out of probe context, a dtrace_sync() can be issued. Once the
686 * dtrace_sync() has completed, it can be known that all CPUs are done
687 * manipulating the dynamic variable -- the dirty list can be atomically
688 * appended to the free list. Unfortunately, there's a slight hiccup in this
689 * mechanism: dtrace_sync() may not be issued from probe context. The
690 * dtrace_sync() must be therefore issued asynchronously from non-probe
691 * context. For this we rely on the DTrace cleaner, a cyclic that runs at the
692 * "cleanrate" frequency. To ease this implementation, we define several chunk
695 * - Dirty. Deallocated chunks, not yet cleaned. Not available.
697 * - Rinsing. Formerly dirty chunks that are currently being asynchronously
698 * cleaned. Not available, but will be shortly. Dynamic variable
699 * allocation may not spin or block for availability, however.
701 * - Clean. Clean chunks, ready for allocation -- but not on the free list.
703 * - Free. Available for allocation.
705 * Moreover, to avoid absurd contention, _each_ of these lists is implemented
706 * on a per-CPU basis. This is only for performance, not correctness; chunks
707 * may be allocated from another CPU's free list. The algorithm for allocation
710 * (1) Attempt to atomically allocate from current CPU's free list. If list
711 * is non-empty and allocation is successful, allocation is complete.
713 * (2) If the clean list is non-empty, atomically move it to the free list,
716 * (3) If the dynamic variable space is in the CLEAN state, look for free
717 * and clean lists on other CPUs by setting the current CPU to the next
718 * CPU, and reattempting (1). If the next CPU is the current CPU (that
719 * is, if all CPUs have been checked), atomically switch the state of
720 * the dynamic variable space based on the following:
722 * - If no free chunks were found and no dirty chunks were found,
723 * atomically set the state to EMPTY.
725 * - If dirty chunks were found, atomically set the state to DIRTY.
727 * - If rinsing chunks were found, atomically set the state to RINSING.
729 * (4) Based on state of dynamic variable space state, increment appropriate
730 * counter to indicate dynamic drops (if in EMPTY state) vs. dynamic
731 * dirty drops (if in DIRTY state) vs. dynamic rinsing drops (if in
732 * RINSING state). Fail the allocation.
734 * The cleaning cyclic operates with the following algorithm: for all CPUs
735 * with a non-empty dirty list, atomically move the dirty list to the rinsing
736 * list. Perform a dtrace_sync(). For all CPUs with a non-empty rinsing list,
737 * atomically move the rinsing list to the clean list. Perform another
738 * dtrace_sync(). By this point, all CPUs have seen the new clean list; the
739 * state of the dynamic variable space can be restored to CLEAN.
741 * There exist two final races that merit explanation. The first is a simple
745 * +---------------------------------+ +---------------------------------+
747 * | allocates dynamic object a[123] | | allocates dynamic object a[123] |
748 * | by storing the value 345 to it | | by storing the value 567 to it |
753 * Again, this is a race in the D program. It can be resolved by having a[123]
754 * hold the value 345 or a[123] hold the value 567 -- but it must be true that
755 * a[123] have only _one_ of these values. (That is, the racing CPUs may not
756 * put the same element twice on the same hash chain.) This is resolved
757 * simply: before the allocation is undertaken, the start of the new chunk's
758 * hash chain is noted. Later, after the allocation is complete, the hash
759 * chain is atomically switched to point to the new element. If this fails
760 * (because of either concurrent allocations or an allocation concurrent with a
761 * deletion), the newly allocated chunk is deallocated to the dirty list, and
762 * the whole process of looking up (and potentially allocating) the dynamic
763 * variable is reattempted.
765 * The final race is a simple deallocation race:
768 * +---------------------------------+ +---------------------------------+
770 * | deallocates dynamic object | | deallocates dynamic object |
771 * | a[123] by storing the value 0 | | a[123] by storing the value 0 |
772 * | to it | | to it |
777 * Once again, this is a race in the D program, but it is one that we must
778 * handle without corrupting the underlying data structures. Because
779 * deallocations require the deletion of a chunk from the middle of a hash
780 * chain, we cannot use a single-word atomic operation to remove it. For this,
781 * we add a spin lock to the hash buckets that is _only_ used for deallocations
782 * (allocation races are handled as above). Further, this spin lock is _only_
783 * held for the duration of the delete; before control is returned to the DIF
784 * emulation code, the hash bucket is unlocked.
786 typedef struct dtrace_key {
787 uint64_t dttk_value; /* data value or data pointer */
788 uint64_t dttk_size; /* 0 if by-val, >0 if by-ref */
791 typedef struct dtrace_tuple {
792 uint32_t dtt_nkeys; /* number of keys in tuple */
793 uint32_t dtt_pad; /* padding */
794 dtrace_key_t dtt_key[1]; /* array of tuple keys */
797 typedef struct dtrace_dynvar {
798 uint64_t dtdv_hashval; /* hash value -- 0 if free */
799 struct dtrace_dynvar *dtdv_next; /* next on list or hash chain */
800 void *dtdv_data; /* pointer to data */
801 dtrace_tuple_t dtdv_tuple; /* tuple key */
804 typedef enum dtrace_dynvar_op {
806 DTRACE_DYNVAR_NOALLOC,
807 DTRACE_DYNVAR_DEALLOC
808 } dtrace_dynvar_op_t;
810 typedef struct dtrace_dynhash {
811 dtrace_dynvar_t *dtdh_chain; /* hash chain for this bucket */
812 uintptr_t dtdh_lock; /* deallocation lock */
814 uintptr_t dtdh_pad[6]; /* pad to avoid false sharing */
816 uintptr_t dtdh_pad[14]; /* pad to avoid false sharing */
820 typedef struct dtrace_dstate_percpu {
821 dtrace_dynvar_t *dtdsc_free; /* free list for this CPU */
822 dtrace_dynvar_t *dtdsc_dirty; /* dirty list for this CPU */
823 dtrace_dynvar_t *dtdsc_rinsing; /* rinsing list for this CPU */
824 dtrace_dynvar_t *dtdsc_clean; /* clean list for this CPU */
825 uint64_t dtdsc_drops; /* number of capacity drops */
826 uint64_t dtdsc_dirty_drops; /* number of dirty drops */
827 uint64_t dtdsc_rinsing_drops; /* number of rinsing drops */
829 uint64_t dtdsc_pad; /* pad to avoid false sharing */
831 uint64_t dtdsc_pad[2]; /* pad to avoid false sharing */
833 } dtrace_dstate_percpu_t;
835 typedef enum dtrace_dstate_state {
836 DTRACE_DSTATE_CLEAN = 0,
839 DTRACE_DSTATE_RINSING
840 } dtrace_dstate_state_t;
842 typedef struct dtrace_dstate {
843 void *dtds_base; /* base of dynamic var. space */
844 size_t dtds_size; /* size of dynamic var. space */
845 size_t dtds_hashsize; /* number of buckets in hash */
846 size_t dtds_chunksize; /* size of each chunk */
847 dtrace_dynhash_t *dtds_hash; /* pointer to hash table */
848 dtrace_dstate_state_t dtds_state; /* current dynamic var. state */
849 dtrace_dstate_percpu_t *dtds_percpu; /* per-CPU dyn. var. state */
853 * DTrace Variable State
855 * The DTrace variable state tracks user-defined variables in its dtrace_vstate
856 * structure. Each DTrace consumer has exactly one dtrace_vstate structure,
857 * but some dtrace_vstate structures may exist without a corresponding DTrace
858 * consumer (see "DTrace Helpers", below). As described in <sys/dtrace.h>,
859 * user-defined variables can have one of three scopes:
861 * DIFV_SCOPE_GLOBAL => global scope
862 * DIFV_SCOPE_THREAD => thread-local scope (i.e. "self->" variables)
863 * DIFV_SCOPE_LOCAL => clause-local scope (i.e. "this->" variables)
865 * The variable state tracks variables by both their scope and their allocation
868 * - The dtvs_globals and dtvs_locals members each point to an array of
869 * dtrace_statvar structures. These structures contain both the variable
870 * metadata (dtrace_difv structures) and the underlying storage for all
871 * statically allocated variables, including statically allocated
872 * DIFV_SCOPE_GLOBAL variables and all DIFV_SCOPE_LOCAL variables.
874 * - The dtvs_tlocals member points to an array of dtrace_difv structures for
875 * DIFV_SCOPE_THREAD variables. As such, this array tracks _only_ the
876 * variable metadata for DIFV_SCOPE_THREAD variables; the underlying storage
877 * is allocated out of the dynamic variable space.
879 * - The dtvs_dynvars member is the dynamic variable state associated with the
880 * variable state. The dynamic variable state (described in "DTrace Dynamic
881 * Variables", above) tracks all DIFV_SCOPE_THREAD variables and all
882 * dynamically-allocated DIFV_SCOPE_GLOBAL variables.
884 typedef struct dtrace_statvar {
885 uint64_t dtsv_data; /* data or pointer to it */
886 size_t dtsv_size; /* size of pointed-to data */
887 int dtsv_refcnt; /* reference count */
888 dtrace_difv_t dtsv_var; /* variable metadata */
891 typedef struct dtrace_vstate {
892 dtrace_state_t *dtvs_state; /* back pointer to state */
893 dtrace_statvar_t **dtvs_globals; /* statically-allocated glbls */
894 int dtvs_nglobals; /* number of globals */
895 dtrace_difv_t *dtvs_tlocals; /* thread-local metadata */
896 int dtvs_ntlocals; /* number of thread-locals */
897 dtrace_statvar_t **dtvs_locals; /* clause-local data */
898 int dtvs_nlocals; /* number of clause-locals */
899 dtrace_dstate_t dtvs_dynvars; /* dynamic variable state */
903 * DTrace Machine State
905 * In the process of processing a fired probe, DTrace needs to track and/or
906 * cache some per-CPU state associated with that particular firing. This is
907 * state that is always discarded after the probe firing has completed, and
908 * much of it is not specific to any DTrace consumer, remaining valid across
909 * all ECBs. This state is tracked in the dtrace_mstate structure.
911 #define DTRACE_MSTATE_ARGS 0x00000001
912 #define DTRACE_MSTATE_PROBE 0x00000002
913 #define DTRACE_MSTATE_EPID 0x00000004
914 #define DTRACE_MSTATE_TIMESTAMP 0x00000008
915 #define DTRACE_MSTATE_STACKDEPTH 0x00000010
916 #define DTRACE_MSTATE_CALLER 0x00000020
917 #define DTRACE_MSTATE_IPL 0x00000040
918 #define DTRACE_MSTATE_FLTOFFS 0x00000080
919 #define DTRACE_MSTATE_WALLTIMESTAMP 0x00000100
920 #define DTRACE_MSTATE_USTACKDEPTH 0x00000200
921 #define DTRACE_MSTATE_UCALLER 0x00000400
923 typedef struct dtrace_mstate {
924 uintptr_t dtms_scratch_base; /* base of scratch space */
925 uintptr_t dtms_scratch_ptr; /* current scratch pointer */
926 size_t dtms_scratch_size; /* scratch size */
927 uint32_t dtms_present; /* variables that are present */
928 uint64_t dtms_arg[5]; /* cached arguments */
929 dtrace_epid_t dtms_epid; /* current EPID */
930 uint64_t dtms_timestamp; /* cached timestamp */
931 hrtime_t dtms_walltimestamp; /* cached wall timestamp */
932 int dtms_stackdepth; /* cached stackdepth */
933 int dtms_ustackdepth; /* cached ustackdepth */
934 struct dtrace_probe *dtms_probe; /* current probe */
935 uintptr_t dtms_caller; /* cached caller */
936 uint64_t dtms_ucaller; /* cached user-level caller */
937 int dtms_ipl; /* cached interrupt pri lev */
938 int dtms_fltoffs; /* faulting DIFO offset */
939 uintptr_t dtms_strtok; /* saved strtok() pointer */
940 uintptr_t dtms_strtok_limit; /* upper bound of strtok ptr */
941 uint32_t dtms_access; /* memory access rights */
942 dtrace_difo_t *dtms_difo; /* current dif object */
943 file_t *dtms_getf; /* cached rval of getf() */
946 #define DTRACE_COND_OWNER 0x1
947 #define DTRACE_COND_USERMODE 0x2
948 #define DTRACE_COND_ZONEOWNER 0x4
950 #define DTRACE_PROBEKEY_MAXDEPTH 8 /* max glob recursion depth */
953 * Access flag used by dtrace_mstate.dtms_access.
955 #define DTRACE_ACCESS_KERNEL 0x1 /* the priv to read kmem */
961 * Each DTrace consumer is in one of several states, which (for purposes of
962 * avoiding yet-another overloading of the noun "state") we call the current
963 * _activity_. The activity transitions on dtrace_go() (from DTRACIOCGO), on
964 * dtrace_stop() (from DTRACIOCSTOP) and on the exit() action. Activities may
965 * only transition in one direction; the activity transition diagram is a
966 * directed acyclic graph. The activity transition diagram is as follows:
969 * +----------+ +--------+ +--------+
970 * | INACTIVE |------------------>| WARMUP |------------------>| ACTIVE |
971 * +----------+ dtrace_go(), +--------+ dtrace_go(), +--------+
972 * before BEGIN | after BEGIN | | |
974 * exit() action | | | |
975 * from BEGIN ECB | | | |
978 * +----------+ exit() action | | |
979 * +-----------------------------| DRAINING |<-------------------+ | |
982 * | dtrace_stop(), | | |
986 * | +---------+ +----------+ | |
987 * | | STOPPED |<----------------| COOLDOWN |<----------------------+ |
988 * | +---------+ dtrace_stop(), +----------+ dtrace_stop(), |
989 * | after END before END |
992 * +----------------------------->| KILLED |<--------------------------+
993 * deadman timeout or +--------+ deadman timeout or
994 * killed consumer killed consumer
996 * Note that once a DTrace consumer has stopped tracing, there is no way to
997 * restart it; if a DTrace consumer wishes to restart tracing, it must reopen
998 * the DTrace pseudodevice.
1000 typedef enum dtrace_activity {
1001 DTRACE_ACTIVITY_INACTIVE = 0, /* not yet running */
1002 DTRACE_ACTIVITY_WARMUP, /* while starting */
1003 DTRACE_ACTIVITY_ACTIVE, /* running */
1004 DTRACE_ACTIVITY_DRAINING, /* before stopping */
1005 DTRACE_ACTIVITY_COOLDOWN, /* while stopping */
1006 DTRACE_ACTIVITY_STOPPED, /* after stopping */
1007 DTRACE_ACTIVITY_KILLED /* killed */
1008 } dtrace_activity_t;
1011 * DTrace Helper Implementation
1013 * A description of the helper architecture may be found in <sys/dtrace.h>.
1014 * Each process contains a pointer to its helpers in its p_dtrace_helpers
1015 * member. This is a pointer to a dtrace_helpers structure, which contains an
1016 * array of pointers to dtrace_helper structures, helper variable state (shared
1017 * among a process's helpers) and a generation count. (The generation count is
1018 * used to provide an identifier when a helper is added so that it may be
1019 * subsequently removed.) The dtrace_helper structure is self-explanatory,
1020 * containing pointers to the objects needed to execute the helper. Note that
1021 * helpers are _duplicated_ across fork(2), and destroyed on exec(2). No more
1022 * than dtrace_helpers_max are allowed per-process.
1024 #define DTRACE_HELPER_ACTION_USTACK 0
1025 #define DTRACE_NHELPER_ACTIONS 1
1027 typedef struct dtrace_helper_action {
1028 int dtha_generation; /* helper action generation */
1029 int dtha_nactions; /* number of actions */
1030 dtrace_difo_t *dtha_predicate; /* helper action predicate */
1031 dtrace_difo_t **dtha_actions; /* array of actions */
1032 struct dtrace_helper_action *dtha_next; /* next helper action */
1033 } dtrace_helper_action_t;
1035 typedef struct dtrace_helper_provider {
1036 int dthp_generation; /* helper provider generation */
1037 uint32_t dthp_ref; /* reference count */
1038 dof_helper_t dthp_prov; /* DOF w/ provider and probes */
1039 } dtrace_helper_provider_t;
1041 typedef struct dtrace_helpers {
1042 dtrace_helper_action_t **dthps_actions; /* array of helper actions */
1043 dtrace_vstate_t dthps_vstate; /* helper action var. state */
1044 dtrace_helper_provider_t **dthps_provs; /* array of providers */
1045 uint_t dthps_nprovs; /* count of providers */
1046 uint_t dthps_maxprovs; /* provider array size */
1047 int dthps_generation; /* current generation */
1048 pid_t dthps_pid; /* pid of associated proc */
1049 int dthps_deferred; /* helper in deferred list */
1050 struct dtrace_helpers *dthps_next; /* next pointer */
1051 struct dtrace_helpers *dthps_prev; /* prev pointer */
1055 * DTrace Helper Action Tracing
1057 * Debugging helper actions can be arduous. To ease the development and
1058 * debugging of helpers, DTrace contains a tracing-framework-within-a-tracing-
1059 * framework: helper tracing. If dtrace_helptrace_enabled is non-zero (which
1060 * it is by default on DEBUG kernels), all helper activity will be traced to a
1061 * global, in-kernel ring buffer. Each entry includes a pointer to the specific
1062 * helper, the location within the helper, and a trace of all local variables.
1063 * The ring buffer may be displayed in a human-readable format with the
1064 * ::dtrace_helptrace mdb(1) dcmd.
1066 #define DTRACE_HELPTRACE_NEXT (-1)
1067 #define DTRACE_HELPTRACE_DONE (-2)
1068 #define DTRACE_HELPTRACE_ERR (-3)
1070 typedef struct dtrace_helptrace {
1071 dtrace_helper_action_t *dtht_helper; /* helper action */
1072 int dtht_where; /* where in helper action */
1073 int dtht_nlocals; /* number of locals */
1074 int dtht_fault; /* type of fault (if any) */
1075 int dtht_fltoffs; /* DIF offset */
1076 uint64_t dtht_illval; /* faulting value */
1077 uint64_t dtht_locals[1]; /* local variables */
1078 } dtrace_helptrace_t;
1081 * DTrace Credentials
1083 * In probe context, we have limited flexibility to examine the credentials
1084 * of the DTrace consumer that created a particular enabling. We use
1085 * the Least Privilege interfaces to cache the consumer's cred pointer and
1086 * some facts about that credential in a dtrace_cred_t structure. These
1087 * can limit the consumer's breadth of visibility and what actions the
1088 * consumer may take.
1090 #define DTRACE_CRV_ALLPROC 0x01
1091 #define DTRACE_CRV_KERNEL 0x02
1092 #define DTRACE_CRV_ALLZONE 0x04
1094 #define DTRACE_CRV_ALL (DTRACE_CRV_ALLPROC | DTRACE_CRV_KERNEL | \
1097 #define DTRACE_CRA_PROC 0x0001
1098 #define DTRACE_CRA_PROC_CONTROL 0x0002
1099 #define DTRACE_CRA_PROC_DESTRUCTIVE_ALLUSER 0x0004
1100 #define DTRACE_CRA_PROC_DESTRUCTIVE_ALLZONE 0x0008
1101 #define DTRACE_CRA_PROC_DESTRUCTIVE_CREDCHG 0x0010
1102 #define DTRACE_CRA_KERNEL 0x0020
1103 #define DTRACE_CRA_KERNEL_DESTRUCTIVE 0x0040
1105 #define DTRACE_CRA_ALL (DTRACE_CRA_PROC | \
1106 DTRACE_CRA_PROC_CONTROL | \
1107 DTRACE_CRA_PROC_DESTRUCTIVE_ALLUSER | \
1108 DTRACE_CRA_PROC_DESTRUCTIVE_ALLZONE | \
1109 DTRACE_CRA_PROC_DESTRUCTIVE_CREDCHG | \
1110 DTRACE_CRA_KERNEL | \
1111 DTRACE_CRA_KERNEL_DESTRUCTIVE)
1113 typedef struct dtrace_cred {
1115 uint8_t dcr_destructive;
1116 uint8_t dcr_visible;
1117 uint16_t dcr_action;
1121 * DTrace Consumer State
1123 * Each DTrace consumer has an associated dtrace_state structure that contains
1124 * its in-kernel DTrace state -- including options, credentials, statistics and
1125 * pointers to ECBs, buffers, speculations and formats. A dtrace_state
1126 * structure is also allocated for anonymous enablings. When anonymous state
1127 * is grabbed, the grabbing consumers dts_anon pointer is set to the grabbed
1128 * dtrace_state structure.
1130 struct dtrace_state {
1132 dev_t dts_dev; /* device */
1134 struct cdev *dts_dev; /* device */
1136 int dts_necbs; /* total number of ECBs */
1137 dtrace_ecb_t **dts_ecbs; /* array of ECBs */
1138 dtrace_epid_t dts_epid; /* next EPID to allocate */
1139 size_t dts_needed; /* greatest needed space */
1140 struct dtrace_state *dts_anon; /* anon. state, if grabbed */
1141 dtrace_activity_t dts_activity; /* current activity */
1142 dtrace_vstate_t dts_vstate; /* variable state */
1143 dtrace_buffer_t *dts_buffer; /* principal buffer */
1144 dtrace_buffer_t *dts_aggbuffer; /* aggregation buffer */
1145 dtrace_speculation_t *dts_speculations; /* speculation array */
1146 int dts_nspeculations; /* number of speculations */
1147 int dts_naggregations; /* number of aggregations */
1148 dtrace_aggregation_t **dts_aggregations; /* aggregation array */
1150 vmem_t *dts_aggid_arena; /* arena for aggregation IDs */
1152 struct unrhdr *dts_aggid_arena; /* arena for aggregation IDs */
1154 uint64_t dts_errors; /* total number of errors */
1155 uint32_t dts_speculations_busy; /* number of spec. busy */
1156 uint32_t dts_speculations_unavail; /* number of spec unavail */
1157 uint32_t dts_stkstroverflows; /* stack string tab overflows */
1158 uint32_t dts_dblerrors; /* errors in ERROR probes */
1159 uint32_t dts_reserve; /* space reserved for END */
1160 hrtime_t dts_laststatus; /* time of last status */
1162 cyclic_id_t dts_cleaner; /* cleaning cyclic */
1163 cyclic_id_t dts_deadman; /* deadman cyclic */
1165 struct callout dts_cleaner; /* Cleaning callout. */
1166 struct callout dts_deadman; /* Deadman callout. */
1168 hrtime_t dts_alive; /* time last alive */
1169 char dts_speculates; /* boolean: has speculations */
1170 char dts_destructive; /* boolean: has dest. actions */
1171 int dts_nformats; /* number of formats */
1172 char **dts_formats; /* format string array */
1173 dtrace_optval_t dts_options[DTRACEOPT_MAX]; /* options */
1174 dtrace_cred_t dts_cred; /* credentials */
1175 size_t dts_nretained; /* number of retained enabs */
1176 int dts_getf; /* number of getf() calls */
1177 uint64_t dts_rstate[NCPU][2]; /* per-CPU random state */
1180 struct dtrace_provider {
1181 dtrace_pattr_t dtpv_attr; /* provider attributes */
1182 dtrace_ppriv_t dtpv_priv; /* provider privileges */
1183 dtrace_pops_t dtpv_pops; /* provider operations */
1184 char *dtpv_name; /* provider name */
1185 void *dtpv_arg; /* provider argument */
1186 hrtime_t dtpv_defunct; /* when made defunct */
1187 struct dtrace_provider *dtpv_next; /* next provider */
1190 struct dtrace_meta {
1191 dtrace_mops_t dtm_mops; /* meta provider operations */
1192 char *dtm_name; /* meta provider name */
1193 void *dtm_arg; /* meta provider user arg */
1194 uint64_t dtm_count; /* no. of associated provs. */
1200 * A dtrace_enabling structure is used to track a collection of ECB
1201 * descriptions -- before they have been turned into actual ECBs. This is
1202 * created as a result of DOF processing, and is generally used to generate
1203 * ECBs immediately thereafter. However, enablings are also generally
1204 * retained should the probes they describe be created at a later time; as
1205 * each new module or provider registers with the framework, the retained
1206 * enablings are reevaluated, with any new match resulting in new ECBs. To
1207 * prevent probes from being matched more than once, the enabling tracks the
1208 * last probe generation matched, and only matches probes from subsequent
1211 typedef struct dtrace_enabling {
1212 dtrace_ecbdesc_t **dten_desc; /* all ECB descriptions */
1213 int dten_ndesc; /* number of ECB descriptions */
1214 int dten_maxdesc; /* size of ECB array */
1215 dtrace_vstate_t *dten_vstate; /* associated variable state */
1216 dtrace_genid_t dten_probegen; /* matched probe generation */
1217 dtrace_ecbdesc_t *dten_current; /* current ECB description */
1218 int dten_error; /* current error value */
1219 int dten_primed; /* boolean: set if primed */
1220 struct dtrace_enabling *dten_prev; /* previous enabling */
1221 struct dtrace_enabling *dten_next; /* next enabling */
1222 } dtrace_enabling_t;
1225 * DTrace Anonymous Enablings
1227 * Anonymous enablings are DTrace enablings that are not associated with a
1228 * controlling process, but rather derive their enabling from DOF stored as
1229 * properties in the dtrace.conf file. If there is an anonymous enabling, a
1230 * DTrace consumer state and enabling are created on attach. The state may be
1231 * subsequently grabbed by the first consumer specifying the "grabanon"
1232 * option. As long as an anonymous DTrace enabling exists, dtrace(7D) will
1235 typedef struct dtrace_anon {
1236 dtrace_state_t *dta_state; /* DTrace consumer state */
1237 dtrace_enabling_t *dta_enabling; /* pointer to enabling */
1238 processorid_t dta_beganon; /* which CPU BEGIN ran on */
1242 * DTrace Error Debugging
1245 #define DTRACE_ERRDEBUG
1248 #ifdef DTRACE_ERRDEBUG
1250 typedef struct dtrace_errhash {
1251 const char *dter_msg; /* error message */
1252 int dter_count; /* number of times seen */
1255 #define DTRACE_ERRHASHSZ 256 /* must be > number of err msgs */
1257 #endif /* DTRACE_ERRDEBUG */
1260 * DTrace Toxic Ranges
1262 * DTrace supports safe loads from probe context; if the address turns out to
1263 * be invalid, a bit will be set by the kernel indicating that DTrace
1264 * encountered a memory error, and DTrace will propagate the error to the user
1265 * accordingly. However, there may exist some regions of memory in which an
1266 * arbitrary load can change system state, and from which it is impossible to
1267 * recover from such a load after it has been attempted. Examples of this may
1268 * include memory in which programmable I/O registers are mapped (for which a
1269 * read may have some implications for the device) or (in the specific case of
1270 * UltraSPARC-I and -II) the virtual address hole. The platform is required
1271 * to make DTrace aware of these toxic ranges; DTrace will then check that
1272 * target addresses are not in a toxic range before attempting to issue a
1275 typedef struct dtrace_toxrange {
1276 uintptr_t dtt_base; /* base of toxic range */
1277 uintptr_t dtt_limit; /* limit of toxic range */
1278 } dtrace_toxrange_t;
1281 extern uint64_t dtrace_getarg(int, int);
1283 extern uint64_t __noinline dtrace_getarg(int, int);
1285 extern greg_t dtrace_getfp(void);
1286 extern int dtrace_getipl(void);
1287 extern uintptr_t dtrace_caller(int);
1288 extern uint32_t dtrace_cas32(uint32_t *, uint32_t, uint32_t);
1289 extern void *dtrace_casptr(volatile void *, volatile void *, volatile void *);
1290 extern void dtrace_copyin(uintptr_t, uintptr_t, size_t, volatile uint16_t *);
1291 extern void dtrace_copyinstr(uintptr_t, uintptr_t, size_t, volatile uint16_t *);
1292 extern void dtrace_copyout(uintptr_t, uintptr_t, size_t, volatile uint16_t *);
1293 extern void dtrace_copyoutstr(uintptr_t, uintptr_t, size_t,
1294 volatile uint16_t *);
1295 extern void dtrace_getpcstack(pc_t *, int, int, uint32_t *);
1296 extern ulong_t dtrace_getreg(struct trapframe *, uint_t);
1297 extern int dtrace_getstackdepth(int);
1298 extern void dtrace_getupcstack(uint64_t *, int);
1299 extern void dtrace_getufpstack(uint64_t *, uint64_t *, int);
1300 extern int dtrace_getustackdepth(void);
1301 extern uintptr_t dtrace_fulword(void *);
1302 extern uint8_t dtrace_fuword8(void *);
1303 extern uint16_t dtrace_fuword16(void *);
1304 extern uint32_t dtrace_fuword32(void *);
1305 extern uint64_t dtrace_fuword64(void *);
1306 extern void dtrace_probe_error(dtrace_state_t *, dtrace_epid_t, int, int,
1308 extern int dtrace_assfail(const char *, const char *, int);
1309 extern int dtrace_attached(void);
1311 extern hrtime_t dtrace_gethrestime(void);
1315 extern void dtrace_flush_windows(void);
1316 extern void dtrace_flush_user_windows(void);
1317 extern uint_t dtrace_getotherwin(void);
1318 extern uint_t dtrace_getfprs(void);
1320 extern void dtrace_copy(uintptr_t, uintptr_t, size_t);
1321 extern void dtrace_copystr(uintptr_t, uintptr_t, size_t, volatile uint16_t *);
1327 * DTrace calls ASSERT and VERIFY from probe context. To assure that a failed
1328 * ASSERT or VERIFY does not induce a markedly more catastrophic failure (e.g.,
1329 * one from which a dump cannot be gleaned), DTrace must define its own ASSERT
1330 * and VERIFY macros to be ones that may safely be called from probe context.
1331 * This header file must thus be included by any DTrace component that calls
1332 * ASSERT and/or VERIFY from probe context, and _only_ by those components.
1333 * (The only exception to this is kernel debugging infrastructure at user-level
1334 * that doesn't depend on calling ASSERT.)
1338 #define VERIFY(EX) ((void)((EX) || \
1339 dtrace_assfail(#EX, __FILE__, __LINE__)))
1341 #define ASSERT(EX) ((void)((EX) || \
1342 dtrace_assfail(#EX, __FILE__, __LINE__)))
1344 #define ASSERT(X) ((void)0)
1351 #endif /* _SYS_DTRACE_IMPL_H */