3 # On the handling of kernel options
5 # All kernel options should be listed in NOTES, with suitable
6 # descriptions. Negative options (options that make some code not
7 # compile) should be commented out; LINT (generated from NOTES) should
8 # compile as much code as possible. Try to structure option-using
9 # code so that a single option only switch code on, or only switch
10 # code off, to make it possible to have a full compile-test. If
11 # necessary, you can check for COMPILING_LINT to get maximum code
14 # All new options shall also be listed in either "conf/options" or
15 # "conf/options.<machine>". Options that affect a single source-file
16 # <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options
17 # that affect multiple files should either go in "opt_global.h" if
18 # this is a kernel-wide option (used just about everywhere), or in
19 # "opt_<option-name-in-lower-case>.h" if it affects only some files.
20 # Note that the effect of listing only an option without a
21 # header-file-name in conf/options (and cousins) is that the last
22 # convention is followed.
24 # This handling scheme is not yet fully implemented.
27 # Format of this file:
28 # Option name filename
30 # If filename is missing, the default is
31 # opt_<name-of-option-in-lower-case>.h
34 AHC_ALLOW_MEMIO opt_aic7xxx.h
35 AHC_TMODE_ENABLE opt_aic7xxx.h
36 AHC_DUMP_EEPROM opt_aic7xxx.h
37 AHC_DEBUG opt_aic7xxx.h
38 AHC_DEBUG_OPTS opt_aic7xxx.h
39 AHC_REG_PRETTY_PRINT opt_aic7xxx.h
40 AHD_DEBUG opt_aic79xx.h
41 AHD_DEBUG_OPTS opt_aic79xx.h
42 AHD_TMODE_ENABLE opt_aic79xx.h
43 AHD_REG_PRETTY_PRINT opt_aic79xx.h
44 ADW_ALLOW_MEMIO opt_adw.h
47 TWA_FLASH_FIRMWARE opt_twa.h
55 KDB_UNATTENDED opt_kdb.h
56 SYSCTL_DEBUG opt_sysctl.h
58 NO_SYSCTL_DESCR opt_global.h
60 # Miscellaneous options.
61 ADAPTIVE_GIANT opt_adaptive_mutexes.h
65 CODA_COMPAT_5 opt_coda.h
66 COMPAT_43 opt_compat.h
67 COMPAT_43TTY opt_compat.h
68 COMPAT_FREEBSD4 opt_compat.h
69 COMPAT_FREEBSD5 opt_compat.h
70 COMPAT_FREEBSD6 opt_compat.h
71 COMPILING_LINT opt_global.h
74 FULL_PREEMPTION opt_sched.h
75 IPI_PREEMPTION opt_sched.h
80 GEOM_CONCAT opt_geom.h
84 GEOM_JOURNAL opt_geom.h
87 GEOM_MIRROR opt_geom.h
88 GEOM_MULTIPATH opt_geom.h
90 GEOM_PART_APM opt_geom.h
91 GEOM_PART_GPT opt_geom.h
92 GEOM_PART_MBR opt_geom.h
96 GEOM_STRIPE opt_geom.h
97 GEOM_SUNLABEL opt_geom.h
99 GEOM_VIRSTOR opt_geom.h
106 KTRACE_REQUEST_POOL opt_ktrace.h
109 MAC_ALWAYS_LABEL_MBUF opt_mac.h
110 MAC_BIBA opt_dontuse.h
111 MAC_BSDEXTENDED opt_dontuse.h
112 MAC_IFOFF opt_dontuse.h
113 MAC_LOMAC opt_dontuse.h
114 MAC_MLS opt_dontuse.h
115 MAC_NONE opt_dontuse.h
116 MAC_PARTITION opt_dontuse.h
117 MAC_PORTACL opt_dontuse.h
118 MAC_SEEOTHERUIDS opt_dontuse.h
120 MAC_STUB opt_dontuse.h
121 MAC_TEST opt_dontuse.h
123 MD_ROOT_SIZE opt_md.h
125 MFI_DECODE_LOG opt_mfi.h
126 MPROF_BUFFERS opt_mprof.h
127 MPROF_HASH_SIZE opt_mprof.h
128 NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h
130 NSWBUF_MIN opt_swap.h
131 MBUF_PACKET_ZONE_DISABLE opt_global.h
132 PANIC_REBOOT_WAIT_TIME opt_panic.h
134 PPC_PROBE_CHIPSET opt_ppc.h
136 PREEMPTION opt_sched.h
138 SCHED_4BSD opt_sched.h
139 SCHED_ULE opt_sched.h
142 SLHCI_DEBUG opt_slhci.h
159 SHMMAXPGS opt_sysvipc.h
163 SYSVMSG opt_sysvipc.h
164 SYSVSEM opt_sysvipc.h
165 SYSVSHM opt_sysvipc.h
166 SW_WATCHDOG opt_watchdog.h
170 VERBOSE_SYSINIT opt_global.h
171 WLCACHE opt_wavelan.h
172 WLDEBUG opt_wavelan.h
174 # POSIX kernel options
175 P1003_1B_MQUEUE opt_posix.h
176 P1003_1B_SEMAPHORES opt_posix.h
177 _KPOSIX_PRIORITY_SCHEDULING opt_posix.h
179 # Do we want the config file compiled into the kernel?
180 INCLUDE_CONFIG_FILE opt_config.h
182 # Options for static filesystems. These should only be used at config
183 # time, since the corresponding lkms cannot work if there are any static
184 # dependencies. Unusability is enforced by hiding the defines for the
185 # options in a never-included header.
189 FDESCFS opt_dontuse.h
191 MSDOSFS opt_dontuse.h
195 PORTALFS opt_dontuse.h
197 PSEUDOFS opt_dontuse.h
198 REISERFS opt_dontuse.h
202 UNIONFS opt_dontuse.h
205 PSEUDOFS_TRACE opt_pseudofs.h
207 # Broken - ffs_snapshot() dependency from ufs_lookup() :-(
208 FFS opt_ffs_broken_fixme.h
210 # These static filesystems have one slightly bogus static dependency in
211 # sys/i386/i386/autoconf.c. If any of these filesystems are
212 # statically compiled into the kernel, code for mounting them as root
213 # filesystems will be enabled - but look below.
218 # filesystems and libiconv bridge
219 CD9660_ICONV opt_dontuse.h
220 MSDOSFS_ICONV opt_dontuse.h
221 NTFS_ICONV opt_dontuse.h
222 UDF_ICONV opt_dontuse.h
224 # If you are following the conditions in the copyright,
225 # you can enable soft-updates which will speed up a lot of thigs
226 # and make the system safer from crashes at the same time.
227 # otherwise a STUB module will be compiled in.
228 SOFTUPDATES opt_ffs.h
230 # On small, embedded systems, it can be useful to turn off support for
231 # snapshots. It saves about 30-40k for a feature that would be lightly
232 # used, if it is used at all.
233 NO_FFS_SNAPSHOT opt_ffs.h
235 # Enabling this option turns on support for Access Control Lists in UFS,
236 # which can be used to support high security configurations. Depends on
240 # Enabling this option turns on support for extended attributes in UFS-based
241 # filesystems, which can be used to support high security configurations
242 # as well as new filesystem features.
243 UFS_EXTATTR opt_ufs.h
244 UFS_EXTATTR_AUTOSTART opt_ufs.h
246 # Enable fast hash lookups for large directories on UFS-based filesystems.
247 UFS_DIRHASH opt_ufs.h
249 # Enable gjournal-based UFS journal.
250 UFS_GJOURNAL opt_ufs.h
252 # The below sentence is not in English, and neither is this one.
253 # We plan to remove the static dependences above, with a
254 # <filesystem>_ROOT option to control if it usable as root. This list
255 # allows these options to be present in config files already (though
256 # they won't make any difference yet).
257 NFS_ROOT opt_nfsroot.h
262 # Options used only in subr_param.c.
267 VM_BCACHE_SIZE_MAX opt_param.h
268 VM_SWZONE_SIZE_MAX opt_param.h
274 # Generic SCSI options.
275 CAM_MAX_HIGHPOWER opt_cam.h
277 CAM_DEBUG_DELAY opt_cam.h
278 CAM_DEBUG_BUS opt_cam.h
279 CAM_DEBUG_TARGET opt_cam.h
280 CAM_DEBUG_LUN opt_cam.h
281 CAM_DEBUG_FLAGS opt_cam.h
282 SCSI_DELAY opt_scsi.h
283 SCSI_NO_SENSE_STRINGS opt_scsi.h
284 SCSI_NO_OP_STRINGS opt_scsi.h
286 # Options used only in cam/scsi/scsi_cd.c
287 CHANGER_MIN_BUSY_SECONDS opt_cd.h
288 CHANGER_MAX_BUSY_SECONDS opt_cd.h
290 # Options used only in cam/scsi/scsi_sa.c.
291 SA_IO_TIMEOUT opt_sa.h
292 SA_SPACE_TIMEOUT opt_sa.h
293 SA_REWIND_TIMEOUT opt_sa.h
294 SA_ERASE_TIMEOUT opt_sa.h
295 SA_1FM_AT_EOD opt_sa.h
297 # Options used only in cam/scsi/scsi_pt.c
298 SCSI_PT_DEFAULT_TIMEOUT opt_pt.h
300 # Options used only in cam/scsi/scsi_ses.c
301 SES_ENABLE_PASSTHROUGH opt_ses.h
303 # Options used in dev/sym/ (Symbios SCSI driver).
304 SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits)
305 # Allows the ncr to take precedence
306 # 1 (1<<0) -> 810a, 860
307 # 2 (1<<1) -> 825a, 875, 885, 895
308 # 4 (1<<2) -> 895a, 896, 1510d
309 SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885
310 # disabled:0 (default), enabled:1
311 SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking
312 # disabled:0, enabled:1 (default)
313 SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported
314 # default:8, range:[1..64]
316 # Options used only in pci/ncr.c
317 SCSI_NCR_DEBUG opt_ncr.h
318 SCSI_NCR_MAX_SYNC opt_ncr.h
319 SCSI_NCR_MAX_WIDE opt_ncr.h
320 SCSI_NCR_MYADDR opt_ncr.h
322 # Options used only in dev/isp/*
323 ISP_TARGET_MODE opt_isp.h
324 ISP_FW_CRASH_DUMP opt_isp.h
325 ISP_DEFAULT_ROLES opt_isp.h
327 # Options used only in dev/iscsi
328 ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h
330 # Options used in the 'ata' ATA/ATAPI driver
331 ATA_STATIC_ID opt_ata.h
344 ALTQ_NOPCC opt_altq.h
345 ALTQ_DEBUG opt_altq.h
347 BOOTP_COMPAT opt_bootp.h
348 BOOTP_NFSROOT opt_bootp.h
349 BOOTP_NFSV3 opt_bootp.h
350 BOOTP_WIRED_TO opt_bootp.h
360 MROUTING opt_mrouting.h
364 IPSEC_DEBUG opt_ipsec.h
365 IPSEC_FILTERTUNNEL opt_ipsec.h
368 IPFILTER opt_ipfilter.h
369 IPFILTER_LOG opt_ipfilter.h
370 IPFILTER_LOOKUP opt_ipfilter.h
371 IPFILTER_DEFAULT_BLOCK opt_ipfilter.h
372 IPFIREWALL opt_ipfw.h
373 IPFIREWALL_VERBOSE opt_ipfw.h
374 IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h
375 IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h
376 IPFIREWALL_FORWARD opt_ipfw.h
377 IPFIREWALL_NAT opt_ipfw.h
386 PPP_BSDCOMP opt_ppp.h
387 PPP_DEFLATE opt_ppp.h
389 SLIP_IFF_OPTS opt_slip.h
391 TCP_SIGNATURE opt_inet.h
393 VLAN_ARRAY opt_vlan.h
400 SCTP_DEBUG opt_sctp.h # Enable debug printfs
401 SCTP_WITH_NO_CSUM opt_sctp.h # Use this at your peril
402 SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity
403 SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free
404 SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity
405 SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets
406 SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed
407 SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns.
412 # Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
413 # Each netgraph node type can be either be compiled into the kernel
414 # or loaded dynamically. To get the former, include the corresponding
415 # option below. Each type has its own man page, e.g. ng_async(4).
417 NETGRAPH_DEBUG opt_netgraph.h
418 NETGRAPH_ASYNC opt_netgraph.h
419 NETGRAPH_ATMLLC opt_netgraph.h
420 NETGRAPH_ATM_ATMPIF opt_netgraph.h
421 NETGRAPH_BLUETOOTH opt_netgraph.h
422 NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h
423 NETGRAPH_BLUETOOTH_H4 opt_netgraph.h
424 NETGRAPH_BLUETOOTH_HCI opt_netgraph.h
425 NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h
426 NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h
427 NETGRAPH_BLUETOOTH_UBT opt_netgraph.h
428 NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h
429 NETGRAPH_BPF opt_netgraph.h
430 NETGRAPH_BRIDGE opt_netgraph.h
431 NETGRAPH_CAR opt_netgraph.h
432 NETGRAPH_CISCO opt_netgraph.h
433 NETGRAPH_DEFLATE opt_netgraph.h
434 NETGRAPH_DEVICE opt_netgraph.h
435 NETGRAPH_ECHO opt_netgraph.h
436 NETGRAPH_EIFACE opt_netgraph.h
437 NETGRAPH_ETHER opt_netgraph.h
438 NETGRAPH_FEC opt_netgraph.h
439 NETGRAPH_FRAME_RELAY opt_netgraph.h
440 NETGRAPH_GIF opt_netgraph.h
441 NETGRAPH_GIF_DEMUX opt_netgraph.h
442 NETGRAPH_HOLE opt_netgraph.h
443 NETGRAPH_IFACE opt_netgraph.h
444 NETGRAPH_IP_INPUT opt_netgraph.h
445 NETGRAPH_IPFW opt_netgraph.h
446 NETGRAPH_KSOCKET opt_netgraph.h
447 NETGRAPH_L2TP opt_netgraph.h
448 NETGRAPH_LMI opt_netgraph.h
449 # MPPC compression requires proprietary files (not included)
450 NETGRAPH_MPPC_COMPRESSION opt_netgraph.h
451 NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h
452 NETGRAPH_NAT opt_netgraph.h
453 NETGRAPH_NETFLOW opt_netgraph.h
454 NETGRAPH_ONE2MANY opt_netgraph.h
455 NETGRAPH_PPP opt_netgraph.h
456 NETGRAPH_PPPOE opt_netgraph.h
457 NETGRAPH_PPTPGRE opt_netgraph.h
458 NETGRAPH_PRED1 opt_netgraph.h
459 NETGRAPH_RFC1490 opt_netgraph.h
460 NETGRAPH_SOCKET opt_netgraph.h
461 NETGRAPH_SPLIT opt_netgraph.h
462 NETGRAPH_SPPP opt_netgraph.h
463 NETGRAPH_TAG opt_netgraph.h
464 NETGRAPH_TCPMSS opt_netgraph.h
465 NETGRAPH_TEE opt_netgraph.h
466 NETGRAPH_TTY opt_netgraph.h
467 NETGRAPH_UI opt_netgraph.h
468 NETGRAPH_VJC opt_netgraph.h
471 NGATM_ATM opt_netgraph.h
472 NGATM_ATMBASE opt_netgraph.h
473 NGATM_SSCOP opt_netgraph.h
474 NGATM_SSCFU opt_netgraph.h
475 NGATM_UNI opt_netgraph.h
476 NGATM_CCATM opt_netgraph.h
481 ZERO_COPY_SOCKETS opt_zero.h
482 TI_PRIVATE_JUMBOS opt_ti.h
483 TI_JUMBO_HDRSPLIT opt_ti.h
485 # ATM (HARP version) - disabled as not MPSAFE in 7.0
488 #ATM_SIGPVC opt_atm.h
492 # XXX Conflict: # of devices vs network protocol (Native ATM).
493 # This makes "atm.h" unusable.
496 # DPT driver debug flags
497 DPT_MEASURE_PERFORMANCE opt_dpt.h
498 DPT_HANDLE_TIMEOUTS opt_dpt.h
499 DPT_TIMEOUT_FACTOR opt_dpt.h
500 DPT_LOST_IRQ opt_dpt.h
501 DPT_RESET_HBA opt_dpt.h
503 # Misc debug flags. Most of these should probably be replaced with
504 # 'DEBUG', and then let people recompile just the interesting modules
505 # with 'make CC="cc -DDEBUG"'.
506 CLUSTERDEBUG opt_debug_cluster.h
507 DEBUG_1284 opt_ppb_1284.h
510 PLIP_DEBUG opt_plip.h
511 LOCKF_DEBUG opt_debug_lockf.h
512 NETATALKDEBUG opt_atalk.h
513 SI_DEBUG opt_debug_si.h
517 FB_INSTALL_CDEV opt_fb.h
519 # ppbus related options
520 PERIPH_1284 opt_ppb_1284.h
521 DONTPROBE_1284 opt_ppb_1284.h
523 # smbus related options
524 ENABLE_ALART opt_intpm.h
526 # These cause changes all over the kernel
527 BLKDEV_IOSIZE opt_global.h
529 DFLTPHYS opt_global.h
530 BURN_BRIDGES opt_global.h
532 DEBUG_LOCKS opt_global.h
533 DEBUG_VFS_LOCKS opt_global.h
534 DIAGNOSTIC opt_global.h
535 INVARIANT_SUPPORT opt_global.h
536 INVARIANTS opt_global.h
537 MCLSHIFT opt_global.h
538 MUTEX_DEBUG opt_global.h
539 MUTEX_NOINLINE opt_global.h
540 LOCK_PROFILING opt_global.h
541 LOCK_PROFILING_FAST opt_global.h
542 LOCK_PROFILING_SHARED opt_global.h
544 REGRESSION opt_global.h
545 RESTARTABLE_PANICS opt_global.h
546 RWLOCK_NOINLINE opt_global.h
547 SX_NOINLINE opt_global.h
548 VFS_BIO_DEBUG opt_global.h
550 # These are VM related options
551 VM_KMEM_SIZE opt_vm.h
552 VM_KMEM_SIZE_SCALE opt_vm.h
553 VM_KMEM_SIZE_MAX opt_vm.h
555 MALLOC_MAKE_FAILURES opt_vm.h
556 MALLOC_PROFILE opt_vm.h
558 # The MemGuard replacement allocator used for tamper-after-free detection
559 DEBUG_MEMGUARD opt_vm.h
561 # The RedZone malloc(9) protection
562 DEBUG_REDZONE opt_vm.h
564 # Standard SMP options
567 # Size of the kernel message buffer
568 MSGBUF_SIZE opt_msgbuf.h
571 NFS_MINATTRTIMO opt_nfs.h
572 NFS_MAXATTRTIMO opt_nfs.h
573 NFS_MINDIRATTRTIMO opt_nfs.h
574 NFS_MAXDIRATTRTIMO opt_nfs.h
575 NFS_GATHERDELAY opt_nfs.h
576 NFS_WDELAYHASHSIZ opt_nfs.h
579 # For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
580 OVERRIDE_CARD opt_bktr.h
581 OVERRIDE_TUNER opt_bktr.h
582 OVERRIDE_DBX opt_bktr.h
583 OVERRIDE_MSP opt_bktr.h
584 BROOKTREE_SYSTEM_DEFAULT opt_bktr.h
585 BROOKTREE_ALLOC_PAGES opt_bktr.h
586 BKTR_OVERRIDE_CARD opt_bktr.h
587 BKTR_OVERRIDE_TUNER opt_bktr.h
588 BKTR_OVERRIDE_DBX opt_bktr.h
589 BKTR_OVERRIDE_MSP opt_bktr.h
590 BKTR_SYSTEM_DEFAULT opt_bktr.h
591 BKTR_ALLOC_PAGES opt_bktr.h
592 BKTR_USE_PLL opt_bktr.h
593 BKTR_GPIO_ACCESS opt_bktr.h
594 BKTR_NO_MSP_RESET opt_bktr.h
595 BKTR_430_FX_MODE opt_bktr.h
596 BKTR_SIS_VIA_MODE opt_bktr.h
597 BKTR_USE_FREEBSD_SMBUS opt_bktr.h
598 BKTR_NEW_MSP34XX_DRIVER opt_bktr.h
600 BREAK_TO_DEBUGGER opt_comconsole.h
601 ALT_BREAK_TO_DEBUGGER opt_comconsole.h
603 # Options to support PPS
604 UART_PPS_ON_CTS opt_uart.h
606 # options for bus/device framework
609 # options for USB support
612 UKBD_DFLT_KEYMAP opt_ukbd.h
613 UPLCOM_INTR_INTERVAL opt_uplcom.h
614 UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h
615 UVSCOM_INTR_INTERVAL opt_uvscom.h
617 # Embedded system options
623 PCFCLOCK_VERBOSE opt_pcfclock.h
624 PCFCLOCK_MAX_RETRIES opt_pcfclock.h
629 KTR_CPUMASK opt_ktr.h
630 KTR_COMPILE opt_global.h
631 KTR_ENTRIES opt_global.h
632 KTR_VERBOSE opt_ktr.h
634 WITNESS_KDB opt_witness.h
635 WITNESS_SKIPSPIN opt_witness.h
637 # options for ACPI support
638 ACPI_DEBUG opt_acpi.h
639 ACPI_MAX_THREADS opt_acpi.h
640 ACPI_NO_SEMAPHORES opt_acpi.h
646 # various 'device presence' options.
650 DEV_SPLASH opt_splash.h
654 EISA_SLOTS opt_eisa.h
665 WI_SYMBOL_FIRMWARE opt_wi.h
667 SOCKBUF_DEBUG opt_global.h
669 # options for ubsec driver
670 UBSEC_DEBUG opt_ubsec.h
671 UBSEC_RNDTEST opt_ubsec.h
672 UBSEC_NO_RNG opt_ubsec.h
674 # options for hifn driver
675 HIFN_DEBUG opt_hifn.h
676 HIFN_RNDTEST opt_hifn.h
678 # options for safenet driver
679 SAFE_DEBUG opt_safe.h
680 SAFE_NO_RNG opt_safe.h
681 SAFE_RNDTEST opt_safe.h
684 MAXCONS opt_syscons.h
685 SC_ALT_MOUSE_IMAGE opt_syscons.h
686 SC_CUT_SPACES2TABS opt_syscons.h
687 SC_CUT_SEPCHARS opt_syscons.h
688 SC_DEBUG_LEVEL opt_syscons.h
689 SC_DFLT_FONT opt_syscons.h
690 SC_DISABLE_KDBKEY opt_syscons.h
691 SC_DISABLE_REBOOT opt_syscons.h
692 SC_HISTORY_SIZE opt_syscons.h
693 SC_KERNEL_CONS_ATTR opt_syscons.h
694 SC_KERNEL_CONS_REV_ATTR opt_syscons.h
695 SC_MOUSE_CHAR opt_syscons.h
696 SC_NO_CUTPASTE opt_syscons.h
697 SC_NO_FONT_LOADING opt_syscons.h
698 SC_NO_HISTORY opt_syscons.h
699 SC_NO_MODE_CHANGE opt_syscons.h
700 SC_NO_SUSPEND_VTYSWITCH opt_syscons.h
701 SC_NO_SYSMOUSE opt_syscons.h
702 SC_NORM_ATTR opt_syscons.h
703 SC_NORM_REV_ATTR opt_syscons.h
704 SC_PIXEL_MODE opt_syscons.h
705 SC_RENDER_DEBUG opt_syscons.h
706 SC_TWOBUTTON_MOUSE opt_syscons.h
709 PRINTF_BUFR_SIZE opt_printf.h
712 KBD_DISABLE_KEYMAP_LOAD opt_kbd.h
713 KBD_INSTALL_CDEV opt_kbd.h
714 KBD_MAXRETRY opt_kbd.h
715 KBD_MAXWAIT opt_kbd.h
716 KBD_RESETDELAY opt_kbd.h
717 KBDIO_DEBUG opt_kbd.h
719 # options for the Atheros driver
723 ATH_DIAGAPI opt_ath.h
724 ATH_TX99_DIAG opt_ath.h
727 DCONS_BUF_SIZE opt_dcons.h
728 DCONS_POLL_HZ opt_dcons.h
729 DCONS_FORCE_CONSOLE opt_dcons.h
730 DCONS_FORCE_GDB opt_dcons.h
736 #XXXBZ#NI4BIPR opt_i4b.h
737 #XXXBZ#NI4BING opt_i4b.h
738 #XXXBZ#NI4BISPPP opt_i4b.h
741 LOOKUP_SHARED opt_vfs.h
746 # XBOX options for FreeBSD/i386, but some files are MI
752 # Interrupt filtering
753 INTR_FILTER opt_global.h