3 # On the handling of kernel options
5 # All kernel options should be listed in NOTES, with suitable
6 # descriptions. Negative options (options that make some code not
7 # compile) should be commented out; LINT (generated from NOTES) should
8 # compile as much code as possible. Try to structure option-using
9 # code so that a single option only switch code on, or only switch
10 # code off, to make it possible to have a full compile-test. If
11 # necessary, you can check for COMPILING_LINT to get maximum code
14 # All new options shall also be listed in either "conf/options" or
15 # "conf/options.<machine>". Options that affect a single source-file
16 # <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options
17 # that affect multiple files should either go in "opt_global.h" if
18 # this is a kernel-wide option (used just about everywhere), or in
19 # "opt_<option-name-in-lower-case>.h" if it affect only some files.
20 # Note that the effect of listing only an option without a
21 # header-file-name in conf/options (and cousins) is that the last
22 # convention is followed.
24 # This handling scheme is not yet fully implemented.
27 # Format of this file:
28 # Option name filename
30 # If filename is missing, the default is
31 # opt_<name-of-option-in-lower-case>.h
34 AHC_ALLOW_MEMIO opt_aic7xxx.h
35 AHC_TMODE_ENABLE opt_aic7xxx.h
36 AHC_DUMP_EEPROM opt_aic7xxx.h
37 AHC_DEBUG opt_aic7xxx.h
38 AHC_DEBUG_OPTS opt_aic7xxx.h
39 AHC_REG_PRETTY_PRINT opt_aic7xxx.h
40 AHD_DEBUG opt_aic79xx.h
41 AHD_DEBUG_OPTS opt_aic79xx.h
42 AHD_TMODE_ENABLE opt_aic79xx.h
43 AHD_REG_PRETTY_PRINT opt_aic79xx.h
44 ADW_ALLOW_MEMIO opt_adw.h
47 TWA_FLASH_FIRMWARE opt_twa.h
56 KDB_UNATTENDED opt_kdb.h
57 SYSCTL_DEBUG opt_sysctl.h
59 # Miscellaneous options.
60 ADAPTIVE_GIANT opt_adaptive_mutexes.h
61 NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h
64 CODA_COMPAT_5 opt_coda.h
65 COMPAT_43 opt_compat.h
66 COMPAT_43TTY opt_compat.h
67 COMPAT_FREEBSD4 opt_compat.h
68 COMPAT_FREEBSD5 opt_compat.h
69 COMPILING_LINT opt_global.h
70 CONSPEED opt_comconsole.h
73 FULL_PREEMPTION opt_sched.h
74 IPI_PREEMPTION opt_sched.h
79 GEOM_CONCAT opt_geom.h
86 GEOM_MIRROR opt_geom.h
91 GEOM_STRIPE opt_geom.h
92 GEOM_SUNLABEL opt_geom.h
99 KTRACE_REQUEST_POOL opt_ktrace.h
102 MAC_ALWAYS_LABEL_MBUF opt_mac.h
103 MAC_BIBA opt_dontuse.h
104 MAC_BSDEXTENDED opt_dontuse.h
106 MAC_IFOFF opt_dontuse.h
107 MAC_LOMAC opt_dontuse.h
108 MAC_MLS opt_dontuse.h
109 MAC_NONE opt_dontuse.h
110 MAC_PARTITION opt_dontuse.h
111 MAC_PORTACL opt_dontuse.h
112 MAC_SEEOTHERUIDS opt_dontuse.h
114 MAC_STUB opt_dontuse.h
115 MAC_TEST opt_dontuse.h
117 MD_ROOT_SIZE opt_md.h
118 MPROF_BUFFERS opt_mprof.h
119 MPROF_HASH_SIZE opt_mprof.h
121 NSWBUF_MIN opt_swap.h
122 PANIC_REBOOT_WAIT_TIME opt_panic.h
124 PREEMPTION opt_sched.h
125 PUC_FASTINTR opt_puc.h
127 SCHED_4BSD opt_sched.h
128 SCHED_ULE opt_sched.h
131 SLHCI_DEBUG opt_slhci.h
148 SHMMAXPGS opt_sysvipc.h
152 SYSVMSG opt_sysvipc.h
153 SYSVSEM opt_sysvipc.h
154 SYSVSHM opt_sysvipc.h
155 SW_WATCHDOG opt_watchdog.h
159 WLCACHE opt_wavelan.h
160 WLDEBUG opt_wavelan.h
162 # POSIX kernel options
163 P1003_1B_MQUEUE opt_posix.h
164 P1003_1B_SEMAPHORES opt_posix.h
165 _KPOSIX_PRIORITY_SCHEDULING opt_posix.h
167 # Do we want the config file compiled into the kernel?
168 INCLUDE_CONFIG_FILE opt_config.h
170 # Options for static filesystems. These should only be used at config
171 # time, since the corresponding lkms cannot work if there are any static
172 # dependencies. Unusability is enforced by hiding the defines for the
173 # options in a never-included header.
177 FDESCFS opt_dontuse.h
179 LINPROCFS opt_dontuse.h
180 MSDOSFS opt_dontuse.h
184 PORTALFS opt_dontuse.h
186 PSEUDOFS opt_dontuse.h
187 REISERFS opt_dontuse.h
191 UNIONFS opt_dontuse.h
194 PSEUDOFS_TRACE opt_pseudofs.h
196 # Broken - ffs_snapshot() dependency from ufs_lookup() :-(
197 FFS opt_ffs_broken_fixme.h
199 # These static filesystems have one slightly bogus static dependency in
200 # sys/i386/i386/autoconf.c. If any of these filesystems are
201 # statically compiled into the kernel, code for mounting them as root
202 # filesystems will be enabled - but look below.
206 # filesystems and libiconv bridge
207 CD9660_ICONV opt_dontuse.h
208 MSDOSFS_ICONV opt_dontuse.h
209 NTFS_ICONV opt_dontuse.h
210 UDF_ICONV opt_dontuse.h
212 # If you are following the conditions in the copyright,
213 # you can enable soft-updates which will speed up a lot of thigs
214 # and make the system safer from crashes at the same time.
215 # otherwise a STUB module will be compiled in.
216 SOFTUPDATES opt_ffs.h
218 # On small, embedded systems, it can be useful to turn off support for
219 # snapshots. It saves about 30-40k for a feature that would be lightly
220 # used, if it is used at all.
221 NO_FFS_SNAPSHOT opt_ffs.h
223 # Enabling this option turns on support for Access Control Lists in UFS,
224 # which can be used to support high security configurations. Depends on
228 # Enabling this option turns on support for extended attributes in UFS-based
229 # filesystems, which can be used to support high security configurations
230 # as well as new filesystem features.
231 UFS_EXTATTR opt_ufs.h
232 UFS_EXTATTR_AUTOSTART opt_ufs.h
234 # Enable fast hash lookups for large directories on UFS-based filesystems.
235 UFS_DIRHASH opt_ufs.h
237 # The below sentence is not in English, and neither is this one.
238 # We plan to remove the static dependences above, with a
239 # <filesystem>_ROOT option to control if it usable as root. This list
240 # allows these options to be present in config files already (though
241 # they won't make any difference yet).
242 NFS_ROOT opt_nfsroot.h
246 NETSMBCRYPTO opt_netsmb.h
248 # Experimental support for large MS-DOS filesystems; SEE WARNING IN "NOTES"!
249 MSDOSFS_LARGE opt_msdosfs.h
251 # Options used only in subr_param.c.
255 NMBCLUSTERS opt_param.h
257 VM_BCACHE_SIZE_MAX opt_param.h
258 VM_SWZONE_SIZE_MAX opt_param.h
264 # Generic SCSI options.
265 CAM_MAX_HIGHPOWER opt_cam.h
267 CAM_DEBUG_DELAY opt_cam.h
268 CAM_DEBUG_BUS opt_cam.h
269 CAM_DEBUG_TARGET opt_cam.h
270 CAM_DEBUG_LUN opt_cam.h
271 CAM_DEBUG_FLAGS opt_cam.h
272 CAM_NEW_TRAN_CODE opt_cam.h
273 SCSI_DELAY opt_scsi.h
274 SCSI_NO_SENSE_STRINGS opt_scsi.h
275 SCSI_NO_OP_STRINGS opt_scsi.h
277 # Options used only in cam/scsi/scsi_cd.c
278 CHANGER_MIN_BUSY_SECONDS opt_cd.h
279 CHANGER_MAX_BUSY_SECONDS opt_cd.h
281 # Options used only in cam/scsi/scsi_sa.c.
282 SA_IO_TIMEOUT opt_sa.h
283 SA_SPACE_TIMEOUT opt_sa.h
284 SA_REWIND_TIMEOUT opt_sa.h
285 SA_ERASE_TIMEOUT opt_sa.h
286 SA_1FM_AT_EOD opt_sa.h
288 # Options used only in cam/scsi/scsi_pt.c
289 SCSI_PT_DEFAULT_TIMEOUT opt_pt.h
291 # Options used only in cam/scsi/scsi_ses.c
292 SES_ENABLE_PASSTHROUGH opt_ses.h
294 # Options used in dev/sym/ (Symbios SCSI driver).
295 SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits)
296 # Allows the ncr to take precedence
297 # 1 (1<<0) -> 810a, 860
298 # 2 (1<<1) -> 825a, 875, 885, 895
299 # 4 (1<<2) -> 895a, 896, 1510d
300 SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885
301 # disabled:0 (default), enabled:1
302 SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking
303 # disabled:0, enabled:1 (default)
304 SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported
305 # default:8, range:[1..64]
307 # Options used only in pci/ncr.c
308 SCSI_NCR_DEBUG opt_ncr.h
309 SCSI_NCR_MAX_SYNC opt_ncr.h
310 SCSI_NCR_MAX_WIDE opt_ncr.h
311 SCSI_NCR_MYADDR opt_ncr.h
313 # Options used only in dev/isp/*
314 ISP_TARGET_MODE opt_isp.h
315 ISP_FW_CRASH_DUMP opt_isp.h
317 # Options used in the 'ata' ATA/ATAPI driver
318 ATA_STATIC_ID opt_ata.h
331 ALTQ_NOPCC opt_altq.h
332 ALTQ_DEBUG opt_altq.h
334 BOOTP_COMPAT opt_bootp.h
335 BOOTP_NFSROOT opt_bootp.h
336 BOOTP_NFSV3 opt_bootp.h
337 BOOTP_WIRED_TO opt_bootp.h
346 MROUTING opt_mrouting.h
351 IPSEC_ESP opt_ipsec.h
352 IPSEC_DEBUG opt_ipsec.h
353 IPSEC_FILTERGIF opt_ipsec.h
354 FAST_IPSEC opt_ipsec.h
357 IPFILTER opt_ipfilter.h
358 IPFILTER_LOG opt_ipfilter.h
359 IPFILTER_LOOKUP opt_ipfilter.h
360 IPFILTER_DEFAULT_BLOCK opt_ipfilter.h
361 IPFIREWALL opt_ipfw.h
362 IPFIREWALL_VERBOSE opt_ipfw.h
363 IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h
364 IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h
365 IPFIREWALL_FORWARD opt_ipfw.h
366 IPFIREWALL_FORWARD_EXTENDED opt_ipfw.h
367 IPV6FIREWALL opt_ip6fw.h
368 IPV6FIREWALL_VERBOSE opt_ip6fw.h
369 IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h
370 IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h
380 NET_WITH_GIANT opt_net.h
381 PPP_BSDCOMP opt_ppp.h
382 PPP_DEFLATE opt_ppp.h
384 SLIP_IFF_OPTS opt_slip.h
386 TCP_SIGNATURE opt_inet.h
387 TCP_SACK_DEBUG opt_tcp_sack.h
388 TCP_DROP_SYNFIN opt_tcp_input.h
390 VLAN_ARRAY opt_vlan.h
393 # Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
394 # Each netgraph node type can be either be compiled into the kernel
395 # or loaded dynamically. To get the former, include the corresponding
396 # option below. Each type has its own man page, e.g. ng_async(4).
398 NETGRAPH_DEBUG opt_netgraph.h
399 NETGRAPH_ASYNC opt_netgraph.h
400 NETGRAPH_ATMLLC opt_netgraph.h
401 NETGRAPH_ATM_ATMPIF opt_netgraph.h
402 NETGRAPH_BLUETOOTH opt_netgraph.h
403 NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h
404 NETGRAPH_BLUETOOTH_H4 opt_netgraph.h
405 NETGRAPH_BLUETOOTH_HCI opt_netgraph.h
406 NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h
407 NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h
408 NETGRAPH_BLUETOOTH_UBT opt_netgraph.h
409 NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h
410 NETGRAPH_BPF opt_netgraph.h
411 NETGRAPH_BRIDGE opt_netgraph.h
412 NETGRAPH_CISCO opt_netgraph.h
413 NETGRAPH_DEVICE opt_netgraph.h
414 NETGRAPH_ECHO opt_netgraph.h
415 NETGRAPH_EIFACE opt_netgraph.h
416 NETGRAPH_ETHER opt_netgraph.h
417 NETGRAPH_FEC opt_netgraph.h
418 NETGRAPH_FRAME_RELAY opt_netgraph.h
419 NETGRAPH_GIF opt_netgraph.h
420 NETGRAPH_GIF_DEMUX opt_netgraph.h
421 NETGRAPH_HOLE opt_netgraph.h
422 NETGRAPH_IFACE opt_netgraph.h
423 NETGRAPH_IP_INPUT opt_netgraph.h
424 NETGRAPH_IPFW opt_netgraph.h
425 NETGRAPH_KSOCKET opt_netgraph.h
426 NETGRAPH_L2TP opt_netgraph.h
427 NETGRAPH_LMI opt_netgraph.h
428 # MPPC compression requires proprietary files (not included)
429 NETGRAPH_MPPC_COMPRESSION opt_netgraph.h
430 NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h
431 NETGRAPH_NAT opt_netgraph.h
432 NETGRAPH_NETFLOW opt_netgraph.h
433 NETGRAPH_ONE2MANY opt_netgraph.h
434 NETGRAPH_PPP opt_netgraph.h
435 NETGRAPH_PPPOE opt_netgraph.h
436 NETGRAPH_PPTPGRE opt_netgraph.h
437 NETGRAPH_RFC1490 opt_netgraph.h
438 NETGRAPH_SOCKET opt_netgraph.h
439 NETGRAPH_SPLIT opt_netgraph.h
440 NETGRAPH_SPPP opt_netgraph.h
441 NETGRAPH_TCPMSS opt_netgraph.h
442 NETGRAPH_TEE opt_netgraph.h
443 NETGRAPH_TTY opt_netgraph.h
444 NETGRAPH_UI opt_netgraph.h
445 NETGRAPH_VJC opt_netgraph.h
448 NGATM_ATM opt_netgraph.h
449 NGATM_ATMBASE opt_netgraph.h
450 NGATM_SSCOP opt_netgraph.h
451 NGATM_SSCFU opt_netgraph.h
452 NGATM_UNI opt_netgraph.h
453 NGATM_CCATM opt_netgraph.h
458 ZERO_COPY_SOCKETS opt_zero.h
459 TI_PRIVATE_JUMBOS opt_ti.h
460 TI_JUMBO_HDRSPLIT opt_ti.h
469 # XXX Conflict: # of devices vs network protocol (Native ATM).
470 # This makes "atm.h" unusable.
473 # DPT driver debug flags
474 DPT_MEASURE_PERFORMANCE opt_dpt.h
475 DPT_HANDLE_TIMEOUTS opt_dpt.h
476 DPT_TIMEOUT_FACTOR opt_dpt.h
477 DPT_LOST_IRQ opt_dpt.h
478 DPT_RESET_HBA opt_dpt.h
480 # Misc debug flags. Most of these should probably be replaced with
481 # 'DEBUG', and then let people recompile just the interesting modules
482 # with 'make CC="cc -DDEBUG"'.
483 CLUSTERDEBUG opt_debug_cluster.h
484 DEBUG_1284 opt_ppb_1284.h
487 PLIP_DEBUG opt_plip.h
488 LOCKF_DEBUG opt_debug_lockf.h
489 NETATALKDEBUG opt_atalk.h
490 SI_DEBUG opt_debug_si.h
494 FB_INSTALL_CDEV opt_fb.h
496 # ppbus related options
497 PERIPH_1284 opt_ppb_1284.h
498 DONTPROBE_1284 opt_ppb_1284.h
500 # smbus related options
501 ENABLE_ALART opt_intpm.h
503 # These cause changes all over the kernel
504 BLKDEV_IOSIZE opt_global.h
505 BURN_BRIDGES opt_global.h
507 DEBUG_LOCKS opt_global.h
508 DEBUG_VFS_LOCKS opt_global.h
509 DIAGNOSTIC opt_global.h
510 INVARIANT_SUPPORT opt_global.h
511 INVARIANTS opt_global.h
512 MCLSHIFT opt_global.h
513 MUTEX_DEBUG opt_global.h
514 MUTEX_NOINLINE opt_global.h
515 MUTEX_PROFILING opt_global.h
517 REGRESSION opt_global.h
518 RESTARTABLE_PANICS opt_global.h
519 RWLOCK_NOINLINE opt_global.h
520 VFS_BIO_DEBUG opt_global.h
522 # These are VM related options
523 VM_KMEM_SIZE opt_vm.h
524 VM_KMEM_SIZE_SCALE opt_vm.h
525 VM_KMEM_SIZE_MAX opt_vm.h
527 MALLOC_MAKE_FAILURES opt_vm.h
528 MALLOC_PROFILE opt_vm.h
529 PQ_NOOPT opt_vmpage.h
531 # The MemGuard replacement allocator used for tamper-after-free detection
532 DEBUG_MEMGUARD opt_vm.h
534 # The RedZone malloc(9) protection
535 DEBUG_REDZONE opt_vm.h
537 # Standard SMP options
540 # Size of the kernel message buffer
541 MSGBUF_SIZE opt_msgbuf.h
544 NFS_MINATTRTIMO opt_nfs.h
545 NFS_MAXATTRTIMO opt_nfs.h
546 NFS_MINDIRATTRTIMO opt_nfs.h
547 NFS_MAXDIRATTRTIMO opt_nfs.h
548 NFS_GATHERDELAY opt_nfs.h
549 NFS_WDELAYHASHSIZ opt_nfs.h
552 # For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
553 OVERRIDE_CARD opt_bktr.h
554 OVERRIDE_TUNER opt_bktr.h
555 OVERRIDE_DBX opt_bktr.h
556 OVERRIDE_MSP opt_bktr.h
557 BROOKTREE_SYSTEM_DEFAULT opt_bktr.h
558 BROOKTREE_ALLOC_PAGES opt_bktr.h
559 BKTR_OVERRIDE_CARD opt_bktr.h
560 BKTR_OVERRIDE_TUNER opt_bktr.h
561 BKTR_OVERRIDE_DBX opt_bktr.h
562 BKTR_OVERRIDE_MSP opt_bktr.h
563 BKTR_SYSTEM_DEFAULT opt_bktr.h
564 BKTR_ALLOC_PAGES opt_bktr.h
565 BKTR_USE_PLL opt_bktr.h
566 BKTR_GPIO_ACCESS opt_bktr.h
567 BKTR_NO_MSP_RESET opt_bktr.h
568 BKTR_430_FX_MODE opt_bktr.h
569 BKTR_SIS_VIA_MODE opt_bktr.h
570 BKTR_USE_FREEBSD_SMBUS opt_bktr.h
571 BKTR_NEW_MSP34XX_DRIVER opt_bktr.h
573 # options for serial support
575 COM_MULTIPORT opt_sio.h
576 BREAK_TO_DEBUGGER opt_comconsole.h
577 ALT_BREAK_TO_DEBUGGER opt_comconsole.h
579 # Options to support PPS
580 UART_PPS_ON_CTS opt_uart.h
582 # options for bus/device framework
585 # options for USB support
588 UKBD_DFLT_KEYMAP opt_ukbd.h
589 UPLCOM_INTR_INTERVAL opt_uplcom.h
590 UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h
591 UVSCOM_INTR_INTERVAL opt_uvscom.h
593 # Embedded system options
599 PCFCLOCK_VERBOSE opt_pcfclock.h
600 PCFCLOCK_MAX_RETRIES opt_pcfclock.h
601 TDFX_LINUX opt_tdfx.h
606 KTR_CPUMASK opt_ktr.h
607 KTR_COMPILE opt_global.h
608 KTR_ENTRIES opt_global.h
609 KTR_VERBOSE opt_ktr.h
611 WITNESS_KDB opt_witness.h
612 WITNESS_SKIPSPIN opt_witness.h
614 # options for ACPI support
615 ACPI_DEBUG opt_acpi.h
616 ACPI_MAX_THREADS opt_acpi.h
617 ACPI_NO_SEMAPHORES opt_acpi.h
618 ACPICA_PEDANTIC opt_acpi.h
620 # options for DEVFS, see sys/fs/devfs/devfs.h
621 NDEVFSINO opt_devfs.h
622 NDEVFSOVERFLOW opt_devfs.h
624 # various 'device presence' options.
629 DEV_SPLASH opt_splash.h
631 EISA_SLOTS opt_eisa.h
639 BGE_FAKE_AUTONEG opt_bge.h
642 WI_SYMBOL_FIRMWARE opt_wi.h
644 SOCKBUF_DEBUG opt_global.h
646 # options for ubsec driver
647 UBSEC_DEBUG opt_ubsec.h
648 UBSEC_RNDTEST opt_ubsec.h
649 UBSEC_NO_RNG opt_ubsec.h
651 # options for hifn driver
652 HIFN_DEBUG opt_hifn.h
653 HIFN_RNDTEST opt_hifn.h
655 # options for safenet driver
656 SAFE_DEBUG opt_safe.h
657 SAFE_NO_RNG opt_safe.h
658 SAFE_RNDTEST opt_safe.h
661 MAXCONS opt_syscons.h
662 SC_ALT_MOUSE_IMAGE opt_syscons.h
663 SC_CUT_SPACES2TABS opt_syscons.h
664 SC_CUT_SEPCHARS opt_syscons.h
665 SC_DEBUG_LEVEL opt_syscons.h
666 SC_DFLT_FONT opt_syscons.h
667 SC_DISABLE_KDBKEY opt_syscons.h
668 SC_DISABLE_REBOOT opt_syscons.h
669 SC_HISTORY_SIZE opt_syscons.h
670 SC_KERNEL_CONS_ATTR opt_syscons.h
671 SC_KERNEL_CONS_REV_ATTR opt_syscons.h
672 SC_MOUSE_CHAR opt_syscons.h
673 SC_NO_CUTPASTE opt_syscons.h
674 SC_NO_FONT_LOADING opt_syscons.h
675 SC_NO_HISTORY opt_syscons.h
676 SC_NO_SUSPEND_VTYSWITCH opt_syscons.h
677 SC_NO_SYSMOUSE opt_syscons.h
678 SC_NORM_ATTR opt_syscons.h
679 SC_NORM_REV_ATTR opt_syscons.h
680 SC_PIXEL_MODE opt_syscons.h
681 SC_RENDER_DEBUG opt_syscons.h
682 SC_TWOBUTTON_MOUSE opt_syscons.h
685 KBD_DISABLE_KEYMAP_LOAD opt_kbd.h
686 KBD_INSTALL_CDEV opt_kbd.h
687 KBD_MAXRETRY opt_kbd.h
688 KBD_MAXWAIT opt_kbd.h
689 KBD_RESETDELAY opt_kbd.h
690 KBDIO_DEBUG opt_kbd.h
692 # options for the Atheros HAL (only useful with source code)
693 AH_SUPPORT_AR5210 opt_ah.h
694 AH_SUPPORT_AR5211 opt_ah.h
695 AH_SUPPORT_AR5212 opt_ah.h
696 AH_SUPPORT_5111 opt_ah.h
697 AH_SUPPORT_5112 opt_ah.h
698 AH_SUPPORT_2413 opt_ah.h
700 AH_DEBUG_ALQ opt_ah.h
704 DCONS_BUF_SIZE opt_dcons.h
705 DCONS_POLL_HZ opt_dcons.h
706 DCONS_FORCE_CONSOLE opt_dcons.h
707 DCONS_FORCE_GDB opt_dcons.h
718 LOOKUP_SHARED opt_vfs.h