3 # On the handling of kernel options
5 # All kernel options should be listed in NOTES, with suitable
6 # descriptions. Negative options (options that make some code not
7 # compile) should be commented out; LINT (generated from NOTES) should
8 # compile as much code as possible. Try to structure option-using
9 # code so that a single option only switch code on, or only switch
10 # code off, to make it possible to have a full compile-test. If
11 # necessary, you can check for COMPILING_LINT to get maximum code
14 # All new options shall also be listed in either "conf/options" or
15 # "conf/options.<machine>". Options that affect a single source-file
16 # <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options
17 # that affect multiple files should either go in "opt_global.h" if
18 # this is a kernel-wide option (used just about everywhere), or in
19 # "opt_<option-name-in-lower-case>.h" if it affect only some files.
20 # Note that the effect of listing only an option without a
21 # header-file-name in conf/options (and cousins) is that the last
22 # convention is followed.
24 # This handling scheme is not yet fully implemented.
27 # Format of this file:
28 # Option name filename
30 # If filename is missing, the default is
31 # opt_<name-of-option-in-lower-case>.h
34 AHC_ALLOW_MEMIO opt_aic7xxx.h
35 AHC_TMODE_ENABLE opt_aic7xxx.h
36 AHC_DUMP_EEPROM opt_aic7xxx.h
37 AHC_DEBUG opt_aic7xxx.h
38 AHC_DEBUG_OPTS opt_aic7xxx.h
39 AHC_REG_PRETTY_PRINT opt_aic7xxx.h
40 AHD_DEBUG opt_aic79xx.h
41 AHD_DEBUG_OPTS opt_aic79xx.h
42 AHD_TMODE_ENABLE opt_aic79xx.h
43 AHD_REG_PRETTY_PRINT opt_aic79xx.h
44 ADW_ALLOW_MEMIO opt_adw.h
47 TWA_FLASH_FIRMWARE opt_twa.h
56 KDB_UNATTENDED opt_kdb.h
57 SYSCTL_DEBUG opt_sysctl.h
59 # Miscellaneous options.
60 ADAPTIVE_GIANT opt_adaptive_mutexes.h
61 NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h
63 CODA_COMPAT_5 opt_coda.h
64 COMPAT_43 opt_compat.h
65 COMPAT_FREEBSD4 opt_compat.h
66 COMPILING_LINT opt_global.h
67 CONSPEED opt_comconsole.h
69 DIRECTIO opt_directio.h
70 FULL_PREEMPTION opt_sched.h
71 PREEMPTION opt_sched.h
76 GEOM_CONCAT opt_geom.h
82 GEOM_MIRROR opt_geom.h
87 GEOM_STRIPE opt_geom.h
88 GEOM_SUNLABEL opt_geom.h
94 KTRACE_REQUEST_POOL opt_ktrace.h
97 MAC_ALWAYS_LABEL_MBUF opt_mac.h
98 MAC_BIBA opt_dontuse.h
99 MAC_BSDEXTENDED opt_dontuse.h
101 MAC_IFOFF opt_dontuse.h
102 MAC_LOMAC opt_dontuse.h
103 MAC_MLS opt_dontuse.h
104 MAC_NONE opt_dontuse.h
105 MAC_PARTITION opt_dontuse.h
106 MAC_PORTACL opt_dontuse.h
107 MAC_SEEOTHERUIDS opt_dontuse.h
109 MAC_STUB opt_dontuse.h
110 MAC_TEST opt_dontuse.h
112 MD_ROOT_SIZE opt_md.h
113 MPROF_BUFFERS opt_mprof.h
114 MPROF_HASH_SIZE opt_mprof.h
116 NSWBUF_MIN opt_swap.h
117 PANIC_REBOOT_WAIT_TIME opt_panic.h
119 PUC_FASTINTR opt_puc.h
121 SCHED_4BSD opt_sched.h
122 SCHED_ULE opt_sched.h
126 SUIDDIR opt_suiddir.h
141 SHMMAXPGS opt_sysvipc.h
145 SYSVMSG opt_sysvipc.h
146 SYSVSEM opt_sysvipc.h
147 SYSVSHM opt_sysvipc.h
148 SW_WATCHDOG opt_watchdog.h
152 WLCACHE opt_wavelan.h
153 WLDEBUG opt_wavelan.h
155 # POSIX kernel options
156 P1003_1B_SEMAPHORES opt_posix.h
157 _KPOSIX_PRIORITY_SCHEDULING opt_posix.h
159 # Do we want the config file compiled into the kernel?
160 INCLUDE_CONFIG_FILE opt_config.h
162 # Options for static filesystems. These should only be used at config
163 # time, since the corresponding lkms cannot work if there are any static
164 # dependencies. Unusability is enforced by hiding the defines for the
165 # options in a never-included header.
169 FDESCFS opt_dontuse.h
171 LINPROCFS opt_dontuse.h
172 MSDOSFS opt_dontuse.h
176 PORTALFS opt_dontuse.h
178 PSEUDOFS opt_dontuse.h
182 UNIONFS opt_dontuse.h
185 PSEUDOFS_TRACE opt_pseudofs.h
187 # Broken - ffs_snapshot() dependency from ufs_lookup() :-(
188 FFS opt_ffs_broken_fixme.h
190 # These static filesystems have one slightly bogus static dependency in
191 # sys/i386/i386/autoconf.c. If any of these filesystems are
192 # statically compiled into the kernel, code for mounting them as root
193 # filesystems will be enabled - but look below.
197 # filesystems and libiconv bridge
198 CD9660_ICONV opt_dontuse.h
199 MSDOSFS_ICONV opt_dontuse.h
200 NTFS_ICONV opt_dontuse.h
201 UDF_ICONV opt_dontuse.h
203 # If you are following the conditions in the copyright,
204 # you can enable soft-updates which will speed up a lot of thigs
205 # and make the system safer from crashes at the same time.
206 # otherwise a STUB module will be compiled in.
207 SOFTUPDATES opt_ffs.h
209 # Enabling this option turns on support for Access Control Lists in UFS,
210 # which can be used to support high security configurations. Depends on
214 # Enabling this option turns on support for extended attributes in UFS-based
215 # filesystems, which can be used to support high security configurations
216 # as well as new filesystem features.
217 UFS_EXTATTR opt_ufs.h
218 UFS_EXTATTR_AUTOSTART opt_ufs.h
220 # Enable fast hash lookups for large directories on UFS-based filesystems.
221 UFS_DIRHASH opt_ufs.h
223 # The below sentence is not in English, and neither is this one.
224 # We plan to remove the static dependences above, with a
225 # <filesystem>_ROOT option to control if it usable as root. This list
226 # allows these options to be present in config files already (though
227 # they won't make any difference yet).
228 NFS_ROOT opt_nfsroot.h
232 NETSMBCRYPTO opt_netsmb.h
234 # Experimental support for large MS-DOS filesystems; SEE WARNING IN "NOTES"!
235 MSDOSFS_LARGE opt_msdosfs.h
237 # Options used only in subr_param.c.
241 NMBCLUSTERS opt_param.h
243 VM_BCACHE_SIZE_MAX opt_param.h
244 VM_SWZONE_SIZE_MAX opt_param.h
250 # Generic SCSI options.
251 CAM_MAX_HIGHPOWER opt_cam.h
253 CAM_DEBUG_DELAY opt_cam.h
254 CAM_DEBUG_BUS opt_cam.h
255 CAM_DEBUG_TARGET opt_cam.h
256 CAM_DEBUG_LUN opt_cam.h
257 CAM_DEBUG_FLAGS opt_cam.h
258 CAM_NEW_TRAN_CODE opt_cam.h
259 SCSI_DELAY opt_scsi.h
260 SCSI_NO_SENSE_STRINGS opt_scsi.h
261 SCSI_NO_OP_STRINGS opt_scsi.h
263 # Options used only in cam/scsi/scsi_cd.c
264 CHANGER_MIN_BUSY_SECONDS opt_cd.h
265 CHANGER_MAX_BUSY_SECONDS opt_cd.h
267 # Options used only in cam/scsi/scsi_sa.c.
268 SA_IO_TIMEOUT opt_sa.h
269 SA_SPACE_TIMEOUT opt_sa.h
270 SA_REWIND_TIMEOUT opt_sa.h
271 SA_ERASE_TIMEOUT opt_sa.h
272 SA_1FM_AT_EOD opt_sa.h
274 # Options used only in cam/scsi/scsi_pt.c
275 SCSI_PT_DEFAULT_TIMEOUT opt_pt.h
277 # Options used only in cam/scsi/scsi_ses.c
278 SES_ENABLE_PASSTHROUGH opt_ses.h
280 # Options used in dev/sym/ (Symbios SCSI driver).
281 SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits)
282 # Allows the ncr to take precedence
283 # 1 (1<<0) -> 810a, 860
284 # 2 (1<<1) -> 825a, 875, 885, 895
285 # 4 (1<<2) -> 895a, 896, 1510d
286 SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885
287 # disabled:0 (default), enabled:1
288 SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking
289 # disabled:0, enabled:1 (default)
290 SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported
291 # default:8, range:[1..64]
293 # Options used only in pci/ncr.c
294 SCSI_NCR_DEBUG opt_ncr.h
295 SCSI_NCR_MAX_SYNC opt_ncr.h
296 SCSI_NCR_MAX_WIDE opt_ncr.h
297 SCSI_NCR_MYADDR opt_ncr.h
299 # Options used only in dev/isp/*
300 ISP_TARGET_MODE opt_isp.h
301 ISP_FW_CRASH_DUMP opt_isp.h
303 # Options used in the 'ata' ATA/ATAPI driver
304 ATA_STATIC_ID opt_ata.h
317 ALTQ_NOPCC opt_altq.h
318 ALTQ_DEBUG opt_altq.h
320 BOOTP_COMPAT opt_bootp.h
321 BOOTP_NFSROOT opt_bootp.h
322 BOOTP_NFSV3 opt_bootp.h
323 BOOTP_WIRED_TO opt_bootp.h
332 MROUTING opt_mrouting.h
337 IPSEC_ESP opt_ipsec.h
338 IPSEC_DEBUG opt_ipsec.h
339 IPSEC_FILTERGIF opt_ipsec.h
340 FAST_IPSEC opt_ipsec.h
343 IPFILTER opt_ipfilter.h
344 IPFILTER_LOG opt_ipfilter.h
345 IPFILTER_LOOKUP opt_ipfilter.h
346 IPFILTER_DEFAULT_BLOCK opt_ipfilter.h
347 IPFIREWALL opt_ipfw.h
348 IPFIREWALL_VERBOSE opt_ipfw.h
349 IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h
350 IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h
351 IPFIREWALL_FORWARD opt_ipfw.h
352 IPFIREWALL_FORWARD_EXTENDED opt_ipfw.h
353 IPV6FIREWALL opt_ip6fw.h
354 IPV6FIREWALL_VERBOSE opt_ip6fw.h
355 IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h
356 IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h
363 MBUF_STRESS_TEST opt_mbuf_stress_test.h
366 NET_WITH_GIANT opt_net.h
367 PPP_BSDCOMP opt_ppp.h
368 PPP_DEFLATE opt_ppp.h
370 SLIP_IFF_OPTS opt_slip.h
372 TCP_SIGNATURE opt_inet.h
373 TCP_SACK_DEBUG opt_tcp_sack.h
374 TCP_DROP_SYNFIN opt_tcp_input.h
377 # Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
378 # Each netgraph node type can be either be compiled into the kernel
379 # or loaded dynamically. To get the former, include the corresponding
380 # option below. Each type has its own man page, e.g. ng_async(4).
382 NETGRAPH_DEBUG opt_netgraph.h
383 NETGRAPH_ASYNC opt_netgraph.h
384 NETGRAPH_ATMLLC opt_netgraph.h
385 NETGRAPH_ATM_ATMPIF opt_netgraph.h
386 NETGRAPH_BLUETOOTH opt_netgraph.h
387 NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h
388 NETGRAPH_BLUETOOTH_H4 opt_netgraph.h
389 NETGRAPH_BLUETOOTH_HCI opt_netgraph.h
390 NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h
391 NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h
392 NETGRAPH_BLUETOOTH_UBT opt_netgraph.h
393 NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h
394 NETGRAPH_BPF opt_netgraph.h
395 NETGRAPH_BRIDGE opt_netgraph.h
396 NETGRAPH_CISCO opt_netgraph.h
397 NETGRAPH_DEVICE opt_netgraph.h
398 NETGRAPH_ECHO opt_netgraph.h
399 NETGRAPH_EIFACE opt_netgraph.h
400 NETGRAPH_ETHER opt_netgraph.h
401 NETGRAPH_FEC opt_netgraph.h
402 NETGRAPH_FRAME_RELAY opt_netgraph.h
403 NETGRAPH_GIF opt_netgraph.h
404 NETGRAPH_GIF_DEMUX opt_netgraph.h
405 NETGRAPH_HOLE opt_netgraph.h
406 NETGRAPH_IFACE opt_netgraph.h
407 NETGRAPH_IP_INPUT opt_netgraph.h
408 NETGRAPH_IPFW opt_netgraph.h
409 NETGRAPH_KSOCKET opt_netgraph.h
410 NETGRAPH_L2TP opt_netgraph.h
411 NETGRAPH_LMI opt_netgraph.h
412 # MPPC compression requires proprietary files (not included)
413 NETGRAPH_MPPC_COMPRESSION opt_netgraph.h
414 NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h
415 NETGRAPH_NAT opt_netgraph.h
416 NETGRAPH_NETFLOW opt_netgraph.h
417 NETGRAPH_ONE2MANY opt_netgraph.h
418 NETGRAPH_PPP opt_netgraph.h
419 NETGRAPH_PPPOE opt_netgraph.h
420 NETGRAPH_PPTPGRE opt_netgraph.h
421 NETGRAPH_RFC1490 opt_netgraph.h
422 NETGRAPH_SOCKET opt_netgraph.h
423 NETGRAPH_SPLIT opt_netgraph.h
424 NETGRAPH_SPPP opt_netgraph.h
425 NETGRAPH_TEE opt_netgraph.h
426 NETGRAPH_TTY opt_netgraph.h
427 NETGRAPH_UI opt_netgraph.h
428 NETGRAPH_VJC opt_netgraph.h
431 NGATM_ATM opt_netgraph.h
432 NGATM_ATMBASE opt_netgraph.h
433 NGATM_SSCOP opt_netgraph.h
434 NGATM_SSCFU opt_netgraph.h
435 NGATM_UNI opt_netgraph.h
436 NGATM_CCATM opt_netgraph.h
441 ZERO_COPY_SOCKETS opt_zero.h
442 TI_PRIVATE_JUMBOS opt_ti.h
443 TI_JUMBO_HDRSPLIT opt_ti.h
452 # XXX Conflict: # of devices vs network protocol (Native ATM).
453 # This makes "atm.h" unusable.
456 # DPT driver debug flags
457 DPT_MEASURE_PERFORMANCE opt_dpt.h
458 DPT_HANDLE_TIMEOUTS opt_dpt.h
459 DPT_TIMEOUT_FACTOR opt_dpt.h
460 DPT_LOST_IRQ opt_dpt.h
461 DPT_RESET_HBA opt_dpt.h
463 # Misc debug flags. Most of these should probably be replaced with
464 # 'DEBUG', and then let people recompile just the interesting modules
465 # with 'make CC="cc -DDEBUG"'.
466 CLUSTERDEBUG opt_debug_cluster.h
467 DEBUG_1284 opt_ppb_1284.h
470 PLIP_DEBUG opt_plip.h
471 LOCKF_DEBUG opt_debug_lockf.h
472 NETATALKDEBUG opt_atalk.h
473 SI_DEBUG opt_debug_si.h
474 SX_DEBUG opt_debug_sx.h
478 FB_INSTALL_CDEV opt_fb.h
480 # ppbus related options
481 PERIPH_1284 opt_ppb_1284.h
482 DONTPROBE_1284 opt_ppb_1284.h
484 # smbus related options
485 ENABLE_ALART opt_intpm.h
487 # These cause changes all over the kernel
488 BLKDEV_IOSIZE opt_global.h
489 BURN_BRIDGES opt_global.h
491 DEBUG_LOCKS opt_global.h
492 DEBUG_VFS_LOCKS opt_global.h
493 DIAGNOSTIC opt_global.h
494 INVARIANT_SUPPORT opt_global.h
495 INVARIANTS opt_global.h
496 MCLSHIFT opt_global.h
497 MUTEX_DEBUG opt_global.h
498 MUTEX_NOINLINE opt_global.h
499 MUTEX_PROFILING opt_global.h
501 REGRESSION opt_global.h
502 RESTARTABLE_PANICS opt_global.h
503 VFS_BIO_DEBUG opt_global.h
505 # These are VM related options
506 VM_KMEM_SIZE opt_vm.h
507 VM_KMEM_SIZE_SCALE opt_vm.h
508 VM_KMEM_SIZE_MAX opt_vm.h
510 MALLOC_MAKE_FAILURES opt_vm.h
511 MALLOC_PROFILE opt_vm.h
512 PQ_NOOPT opt_vmpage.h
513 PQ_NORMALCACHE opt_vmpage.h
514 PQ_MEDIUMCACHE opt_vmpage.h
515 PQ_LARGECACHE opt_vmpage.h
516 PQ_HUGECACHE opt_vmpage.h
517 PQ_CACHESIZE opt_vmpage.h
519 # The MemGuard replacement allocator used for tamper-after-free detection
520 DEBUG_MEMGUARD opt_vm.h
522 # Standard SMP options
525 # Size of the kernel message buffer
526 MSGBUF_SIZE opt_msgbuf.h
529 NFS_MINATTRTIMO opt_nfs.h
530 NFS_MAXATTRTIMO opt_nfs.h
531 NFS_MINDIRATTRTIMO opt_nfs.h
532 NFS_MAXDIRATTRTIMO opt_nfs.h
533 NFS_GATHERDELAY opt_nfs.h
534 NFS_WDELAYHASHSIZ opt_nfs.h
537 # For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
538 OVERRIDE_CARD opt_bktr.h
539 OVERRIDE_TUNER opt_bktr.h
540 OVERRIDE_DBX opt_bktr.h
541 OVERRIDE_MSP opt_bktr.h
542 BROOKTREE_SYSTEM_DEFAULT opt_bktr.h
543 BROOKTREE_ALLOC_PAGES opt_bktr.h
544 BKTR_OVERRIDE_CARD opt_bktr.h
545 BKTR_OVERRIDE_TUNER opt_bktr.h
546 BKTR_OVERRIDE_DBX opt_bktr.h
547 BKTR_OVERRIDE_MSP opt_bktr.h
548 BKTR_SYSTEM_DEFAULT opt_bktr.h
549 BKTR_ALLOC_PAGES opt_bktr.h
550 BKTR_USE_PLL opt_bktr.h
551 BKTR_GPIO_ACCESS opt_bktr.h
552 BKTR_NO_MSP_RESET opt_bktr.h
553 BKTR_430_FX_MODE opt_bktr.h
554 BKTR_SIS_VIA_MODE opt_bktr.h
555 BKTR_USE_FREEBSD_SMBUS opt_bktr.h
556 BKTR_NEW_MSP34XX_DRIVER opt_bktr.h
558 # options for serial support
560 COM_MULTIPORT opt_sio.h
561 BREAK_TO_DEBUGGER opt_comconsole.h
562 ALT_BREAK_TO_DEBUGGER opt_comconsole.h
564 # Options to support PPS
565 UART_PPS_ON_CTS opt_uart.h
567 # options for bus/device framework
570 # options for USB support
573 UKBD_DFLT_KEYMAP opt_ukbd.h
574 UPLCOM_INTR_INTERVAL opt_uplcom.h
575 UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h
576 UVSCOM_INTR_INTERVAL opt_uvscom.h
578 # Embedded system options
579 INIT_PATH opt_init_path.h
581 ROOTDEVNAME opt_rootdevname.h
584 PCFCLOCK_VERBOSE opt_pcfclock.h
585 PCFCLOCK_MAX_RETRIES opt_pcfclock.h
586 TDFX_LINUX opt_tdfx.h
591 KTR_CPUMASK opt_ktr.h
592 KTR_COMPILE opt_global.h
593 KTR_ENTRIES opt_global.h
594 KTR_VERBOSE opt_ktr.h
596 WITNESS_KDB opt_witness.h
597 WITNESS_SKIPSPIN opt_witness.h
599 # options for ACPI support
600 ACPI_DEBUG opt_acpi.h
601 ACPI_MAX_THREADS opt_acpi.h
602 ACPI_NO_SEMAPHORES opt_acpi.h
603 ACPICA_PEDANTIC opt_acpi.h
605 # options for DEVFS, see sys/fs/devfs/devfs.h
606 NDEVFSINO opt_devfs.h
607 NDEVFSOVERFLOW opt_devfs.h
609 # various 'device presence' options.
614 DEV_SPLASH opt_splash.h
616 EISA_SLOTS opt_eisa.h
619 ED_NO_MIIBUS opt_ed.h
625 WI_SYMBOL_FIRMWARE opt_wi.h
627 # XXX bogusly global.
628 DEVICE_POLLING opt_global.h
630 SOCKBUF_DEBUG opt_global.h
632 # options for ubsec driver
633 UBSEC_DEBUG opt_ubsec.h
634 UBSEC_RNDTEST opt_ubsec.h
635 UBSEC_NO_RNG opt_ubsec.h
637 # options for hifn driver
638 HIFN_DEBUG opt_hifn.h
639 HIFN_RNDTEST opt_hifn.h
641 # options for safenet driver
642 SAFE_DEBUG opt_safe.h
643 SAFE_NO_RNG opt_safe.h
644 SAFE_RNDTEST opt_safe.h
647 MAXCONS opt_syscons.h
648 SC_ALT_MOUSE_IMAGE opt_syscons.h
649 SC_CUT_SPACES2TABS opt_syscons.h
650 SC_CUT_SEPCHARS opt_syscons.h
651 SC_DEBUG_LEVEL opt_syscons.h
652 SC_DFLT_FONT opt_syscons.h
653 SC_DISABLE_KDBKEY opt_syscons.h
654 SC_DISABLE_REBOOT opt_syscons.h
655 SC_HISTORY_SIZE opt_syscons.h
656 SC_KERNEL_CONS_ATTR opt_syscons.h
657 SC_KERNEL_CONS_REV_ATTR opt_syscons.h
658 SC_MOUSE_CHAR opt_syscons.h
659 SC_NO_CUTPASTE opt_syscons.h
660 SC_NO_FONT_LOADING opt_syscons.h
661 SC_NO_HISTORY opt_syscons.h
662 SC_NO_SUSPEND_VTYSWITCH opt_syscons.h
663 SC_NO_SYSMOUSE opt_syscons.h
664 SC_NORM_ATTR opt_syscons.h
665 SC_NORM_REV_ATTR opt_syscons.h
666 SC_PIXEL_MODE opt_syscons.h
667 SC_RENDER_DEBUG opt_syscons.h
668 SC_TWOBUTTON_MOUSE opt_syscons.h
671 KBD_DISABLE_KEYMAP_LOAD opt_kbd.h
672 KBD_INSTALL_CDEV opt_kbd.h
673 KBD_MAXRETRY opt_kbd.h
674 KBD_MAXWAIT opt_kbd.h
675 KBD_RESETDELAY opt_kbd.h
676 KBDIO_DEBUG opt_kbd.h
678 # options for the Atheros HAL (only useful with source code)
679 AH_SUPPORT_AR5210 opt_ah.h
680 AH_SUPPORT_AR5211 opt_ah.h
681 AH_SUPPORT_AR5212 opt_ah.h
682 AH_SUPPORT_5111 opt_ah.h
683 AH_SUPPORT_5112 opt_ah.h
684 AH_SUPPORT_2413 opt_ah.h
686 AH_DEBUG_ALQ opt_ah.h
690 DCONS_BUF_SIZE opt_dcons.h
691 DCONS_POLL_HZ opt_dcons.h
692 DCONS_FORCE_CONSOLE opt_dcons.h
693 DCONS_FORCE_GDB opt_dcons.h
704 LOOKUP_SHARED opt_vfs.h
707 HWPMC_HOOKS opt_global.h