]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - sys/conf/options
Hook up gjournal bits to the build.
[FreeBSD/FreeBSD.git] / sys / conf / options
1 # $FreeBSD$
2 #
3 #        On the handling of kernel options
4 #
5 # All kernel options should be listed in NOTES, with suitable
6 # descriptions.  Negative options (options that make some code not
7 # compile) should be commented out; LINT (generated from NOTES) should
8 # compile as much code as possible.  Try to structure option-using
9 # code so that a single option only switch code on, or only switch
10 # code off, to make it possible to have a full compile-test.  If
11 # necessary, you can check for COMPILING_LINT to get maximum code
12 # coverage.
13 #
14 # All new options shall also be listed in either "conf/options" or
15 # "conf/options.<machine>".  Options that affect a single source-file
16 # <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options
17 # that affect multiple files should either go in "opt_global.h" if
18 # this is a kernel-wide option (used just about everywhere), or in
19 # "opt_<option-name-in-lower-case>.h" if it affect only some files.
20 # Note that the effect of listing only an option without a
21 # header-file-name in conf/options (and cousins) is that the last
22 # convention is followed.
23 #
24 # This handling scheme is not yet fully implemented.
25 #
26 #
27 # Format of this file:
28 # Option name   filename
29 #
30 # If filename is missing, the default is
31 # opt_<name-of-option-in-lower-case>.h
32
33 AAC_DEBUG               opt_aac.h
34 AHC_ALLOW_MEMIO         opt_aic7xxx.h
35 AHC_TMODE_ENABLE        opt_aic7xxx.h
36 AHC_DUMP_EEPROM         opt_aic7xxx.h
37 AHC_DEBUG               opt_aic7xxx.h
38 AHC_DEBUG_OPTS          opt_aic7xxx.h
39 AHC_REG_PRETTY_PRINT    opt_aic7xxx.h
40 AHD_DEBUG               opt_aic79xx.h
41 AHD_DEBUG_OPTS          opt_aic79xx.h
42 AHD_TMODE_ENABLE        opt_aic79xx.h   
43 AHD_REG_PRETTY_PRINT    opt_aic79xx.h
44 ADW_ALLOW_MEMIO         opt_adw.h
45
46 TWA_DEBUG               opt_twa.h
47 TWA_FLASH_FIRMWARE      opt_twa.h
48
49 # Debugging options.
50 DDB
51 DDB_NUMSYM      opt_ddb.h
52 GDB
53 KDB             opt_global.h
54 KDB_TRACE       opt_kdb.h
55 KDB_UNATTENDED  opt_kdb.h
56 SYSCTL_DEBUG    opt_sysctl.h
57
58 NO_SYSCTL_DESCR opt_global.h
59
60 # Miscellaneous options.
61 ADAPTIVE_GIANT  opt_adaptive_mutexes.h
62 NO_ADAPTIVE_MUTEXES     opt_adaptive_mutexes.h
63 ALQ
64 AUDIT           opt_global.h
65 CODA_COMPAT_5   opt_coda.h
66 COMPAT_43       opt_compat.h
67 COMPAT_43TTY    opt_compat.h
68 COMPAT_FREEBSD4 opt_compat.h
69 COMPAT_FREEBSD5 opt_compat.h
70 COMPAT_FREEBSD6 opt_compat.h
71 COMPILING_LINT  opt_global.h
72 CY_PCI_FASTINTR
73 DIRECTIO
74 FULL_PREEMPTION opt_sched.h
75 IPI_PREEMPTION  opt_sched.h
76 GEOM_AES        opt_geom.h
77 GEOM_APPLE      opt_geom.h
78 GEOM_BDE        opt_geom.h
79 GEOM_BSD        opt_geom.h
80 GEOM_CACHE      opt_geom.h
81 GEOM_CONCAT     opt_geom.h
82 GEOM_ELI        opt_geom.h
83 GEOM_FOX        opt_geom.h
84 GEOM_GATE       opt_geom.h
85 GEOM_GPT        opt_geom.h
86 GEOM_JOURNAL    opt_geom.h
87 GEOM_LABEL      opt_geom.h
88 GEOM_MBR        opt_geom.h
89 GEOM_MIRROR     opt_geom.h
90 GEOM_NOP        opt_geom.h
91 GEOM_PC98       opt_geom.h
92 GEOM_RAID3      opt_geom.h
93 GEOM_SHSEC      opt_geom.h
94 GEOM_STRIPE     opt_geom.h
95 GEOM_SUNLABEL   opt_geom.h
96 GEOM_UZIP       opt_geom.h
97 GEOM_VOL        opt_geom.h
98 GEOM_ZERO       opt_geom.h
99 KSE             opt_global.h
100 KSTACK_MAX_PAGES
101 KSTACK_PAGES
102 KTRACE
103 KTRACE_REQUEST_POOL     opt_ktrace.h
104 LIBICONV
105 MAC
106 MAC_ALWAYS_LABEL_MBUF   opt_mac.h
107 MAC_BIBA        opt_dontuse.h
108 MAC_BSDEXTENDED opt_dontuse.h
109 MAC_IFOFF       opt_dontuse.h
110 MAC_LOMAC       opt_dontuse.h
111 MAC_MLS         opt_dontuse.h
112 MAC_NONE        opt_dontuse.h
113 MAC_PARTITION   opt_dontuse.h
114 MAC_PORTACL     opt_dontuse.h
115 MAC_SEEOTHERUIDS        opt_dontuse.h
116 MAC_STATIC      opt_mac.h
117 MAC_STUB        opt_dontuse.h
118 MAC_TEST        opt_dontuse.h
119 MD_ROOT         opt_md.h
120 MD_ROOT_SIZE    opt_md.h
121 MFI_DEBUG       opt_mfi.h
122 MFI_DECODE_LOG  opt_mfi.h
123 MPROF_BUFFERS   opt_mprof.h
124 MPROF_HASH_SIZE opt_mprof.h
125 MUTEX_WAKE_ALL
126 NSWBUF_MIN      opt_swap.h
127 PANIC_REBOOT_WAIT_TIME  opt_panic.h
128 PPC_DEBUG       opt_ppc.h
129 PPC_PROBE_CHIPSET opt_ppc.h
130 PPS_SYNC        opt_ntp.h
131 PREEMPTION      opt_sched.h
132 QUOTA
133 SCHED_4BSD      opt_sched.h
134 SCHED_CORE      opt_sched.h
135 SCHED_ULE       opt_sched.h
136 SHOW_BUSYBUFS
137 SLEEPQUEUE_PROFILING
138 SLHCI_DEBUG     opt_slhci.h
139 SPX_HACK
140 SUIDDIR
141 MSGMNB          opt_sysvipc.h
142 MSGMNI          opt_sysvipc.h
143 MSGSEG          opt_sysvipc.h
144 MSGSSZ          opt_sysvipc.h
145 MSGTQL          opt_sysvipc.h
146 SEMMAP          opt_sysvipc.h
147 SEMMNI          opt_sysvipc.h
148 SEMMNS          opt_sysvipc.h
149 SEMMNU          opt_sysvipc.h
150 SEMMSL          opt_sysvipc.h
151 SEMOPM          opt_sysvipc.h
152 SEMUME          opt_sysvipc.h
153 SHMALL          opt_sysvipc.h
154 SHMMAX          opt_sysvipc.h
155 SHMMAXPGS       opt_sysvipc.h
156 SHMMIN          opt_sysvipc.h
157 SHMMNI          opt_sysvipc.h
158 SHMSEG          opt_sysvipc.h
159 SYSVMSG         opt_sysvipc.h
160 SYSVSEM         opt_sysvipc.h
161 SYSVSHM         opt_sysvipc.h
162 SW_WATCHDOG     opt_watchdog.h
163 TURNSTILE_PROFILING
164 TTYHOG          opt_tty.h
165 VFS_AIO
166 VERBOSE_SYSINIT opt_global.h
167 WLCACHE         opt_wavelan.h
168 WLDEBUG         opt_wavelan.h
169
170 # POSIX kernel options
171 P1003_1B_MQUEUE                 opt_posix.h
172 P1003_1B_SEMAPHORES             opt_posix.h
173 _KPOSIX_PRIORITY_SCHEDULING     opt_posix.h
174
175 # Do we want the config file compiled into the kernel?
176 INCLUDE_CONFIG_FILE     opt_config.h
177
178 # Options for static filesystems.  These should only be used at config
179 # time, since the corresponding lkms cannot work if there are any static
180 # dependencies.  Unusability is enforced by hiding the defines for the
181 # options in a never-included header.
182 CD9660          opt_dontuse.h
183 CODA            opt_dontuse.h
184 EXT2FS          opt_dontuse.h
185 FDESCFS         opt_dontuse.h
186 HPFS            opt_dontuse.h
187 MSDOSFS         opt_dontuse.h
188 NTFS            opt_dontuse.h
189 NULLFS          opt_dontuse.h
190 NWFS            opt_dontuse.h
191 PORTALFS        opt_dontuse.h
192 PROCFS          opt_dontuse.h
193 PSEUDOFS        opt_dontuse.h
194 REISERFS        opt_dontuse.h
195 SMBFS           opt_dontuse.h
196 UDF             opt_dontuse.h
197 UMAPFS          opt_dontuse.h
198 UNIONFS         opt_dontuse.h
199
200 # Pseudofs debugging
201 PSEUDOFS_TRACE  opt_pseudofs.h
202
203 # Broken - ffs_snapshot() dependency from ufs_lookup() :-(
204 FFS             opt_ffs_broken_fixme.h
205
206 # These static filesystems have one slightly bogus static dependency in
207 # sys/i386/i386/autoconf.c.  If any of these filesystems are
208 # statically compiled into the kernel, code for mounting them as root
209 # filesystems will be enabled - but look below.
210 NFSCLIENT       opt_nfs.h
211 NFSSERVER       opt_nfs.h
212 NFS4CLIENT      opt_nfs.h
213
214 # filesystems and libiconv bridge
215 CD9660_ICONV    opt_dontuse.h
216 MSDOSFS_ICONV   opt_dontuse.h
217 NTFS_ICONV      opt_dontuse.h
218 UDF_ICONV       opt_dontuse.h
219
220 # If you are following the conditions in the copyright,
221 # you can enable soft-updates which will speed up a lot of thigs
222 # and make the system safer from crashes at the same time.
223 # otherwise a STUB module will be compiled in.
224 SOFTUPDATES     opt_ffs.h
225
226 # On small, embedded systems, it can be useful to turn off support for
227 # snapshots.  It saves about 30-40k for a feature that would be lightly
228 # used, if it is used at all.
229 NO_FFS_SNAPSHOT opt_ffs.h
230
231 # Enabling this option turns on support for Access Control Lists in UFS,
232 # which can be used to support high security configurations.  Depends on
233 # UFS_EXTATTR.
234 UFS_ACL         opt_ufs.h
235
236 # Enabling this option turns on support for extended attributes in UFS-based
237 # filesystems, which can be used to support high security configurations
238 # as well as new filesystem features.
239 UFS_EXTATTR     opt_ufs.h
240 UFS_EXTATTR_AUTOSTART   opt_ufs.h
241
242 # Enable fast hash lookups for large directories on UFS-based filesystems.
243 UFS_DIRHASH     opt_ufs.h
244
245 # Enable gjournal-based UFS journal.
246 UFS_GJOURNAL    opt_ufs.h
247
248 # The below sentence is not in English, and neither is this one.
249 # We plan to remove the static dependences above, with a
250 # <filesystem>_ROOT option to control if it usable as root.  This list
251 # allows these options to be present in config files already (though
252 # they won't make any difference yet).
253 NFS_ROOT        opt_nfsroot.h
254
255 # SMB/CIFS requester
256 NETSMB          opt_netsmb.h
257
258 # Experimental support for large MS-DOS filesystems; SEE WARNING IN "NOTES"!
259 MSDOSFS_LARGE   opt_msdosfs.h
260
261 # Options used only in subr_param.c.
262 HZ              opt_param.h
263 MAXFILES        opt_param.h
264 NBUF            opt_param.h
265 NSFBUFS         opt_param.h
266 VM_BCACHE_SIZE_MAX      opt_param.h
267 VM_SWZONE_SIZE_MAX      opt_param.h
268 MAXUSERS
269 DFLDSIZ         opt_param.h
270 MAXDSIZ         opt_param.h
271 MAXSSIZ         opt_param.h
272
273 # Generic SCSI options.
274 CAM_MAX_HIGHPOWER       opt_cam.h
275 CAMDEBUG                opt_cam.h
276 CAM_DEBUG_DELAY         opt_cam.h
277 CAM_DEBUG_BUS           opt_cam.h
278 CAM_DEBUG_TARGET        opt_cam.h
279 CAM_DEBUG_LUN           opt_cam.h
280 CAM_DEBUG_FLAGS         opt_cam.h
281 CAM_NEW_TRAN_CODE       opt_cam.h
282 SCSI_DELAY              opt_scsi.h
283 SCSI_NO_SENSE_STRINGS   opt_scsi.h
284 SCSI_NO_OP_STRINGS      opt_scsi.h
285
286 # Options used only in cam/scsi/scsi_cd.c
287 CHANGER_MIN_BUSY_SECONDS        opt_cd.h
288 CHANGER_MAX_BUSY_SECONDS        opt_cd.h
289
290 # Options used only in cam/scsi/scsi_sa.c.
291 SA_IO_TIMEOUT           opt_sa.h
292 SA_SPACE_TIMEOUT        opt_sa.h
293 SA_REWIND_TIMEOUT       opt_sa.h
294 SA_ERASE_TIMEOUT        opt_sa.h
295 SA_1FM_AT_EOD           opt_sa.h
296
297 # Options used only in cam/scsi/scsi_pt.c
298 SCSI_PT_DEFAULT_TIMEOUT opt_pt.h
299
300 # Options used only in cam/scsi/scsi_ses.c
301 SES_ENABLE_PASSTHROUGH  opt_ses.h
302
303 # Options used in dev/sym/ (Symbios SCSI driver).
304 SYM_SETUP_LP_PROBE_MAP  opt_sym.h       #-Low Priority Probe Map (bits)
305                                         # Allows the ncr to take precedence
306                                         # 1 (1<<0) -> 810a, 860
307                                         # 2 (1<<1) -> 825a, 875, 885, 895
308                                         # 4 (1<<2) -> 895a, 896, 1510d 
309 SYM_SETUP_SCSI_DIFF     opt_sym.h       #-HVD support for 825a, 875, 885
310                                         # disabled:0 (default), enabled:1
311 SYM_SETUP_PCI_PARITY    opt_sym.h       #-PCI parity checking
312                                         # disabled:0, enabled:1 (default)
313 SYM_SETUP_MAX_LUN       opt_sym.h       #-Number of LUNs supported
314                                         # default:8, range:[1..64]
315
316 # Options used only in pci/ncr.c
317 SCSI_NCR_DEBUG          opt_ncr.h
318 SCSI_NCR_MAX_SYNC       opt_ncr.h
319 SCSI_NCR_MAX_WIDE       opt_ncr.h
320 SCSI_NCR_MYADDR         opt_ncr.h
321
322 # Options used only in dev/isp/*
323 ISP_TARGET_MODE         opt_isp.h
324 ISP_FW_CRASH_DUMP       opt_isp.h
325 ISP_DEFAULT_ROLES       opt_isp.h
326
327 # Options used in the 'ata' ATA/ATAPI driver
328 ATA_STATIC_ID           opt_ata.h
329 ATA_NOPCI               opt_ata.h
330
331 # Net stuff.
332 ACCEPT_FILTER_DATA
333 ACCEPT_FILTER_HTTP
334 ALTQ                    opt_global.h
335 ALTQ_CBQ                opt_altq.h
336 ALTQ_RED                opt_altq.h
337 ALTQ_RIO                opt_altq.h
338 ALTQ_HFSC               opt_altq.h
339 ALTQ_CDNR               opt_altq.h
340 ALTQ_PRIQ               opt_altq.h
341 ALTQ_NOPCC              opt_altq.h
342 ALTQ_DEBUG              opt_altq.h
343 BOOTP                   opt_bootp.h
344 BOOTP_COMPAT            opt_bootp.h
345 BOOTP_NFSROOT           opt_bootp.h
346 BOOTP_NFSV3             opt_bootp.h
347 BOOTP_WIRED_TO          opt_bootp.h
348 DEVICE_POLLING
349 DEV_ENC                 opt_enc.h
350 DEV_PF                  opt_pf.h
351 DEV_PFLOG               opt_pf.h
352 DEV_PFSYNC              opt_pf.h
353 ETHER_II                opt_ef.h
354 ETHER_8023              opt_ef.h
355 ETHER_8022              opt_ef.h
356 ETHER_SNAP              opt_ef.h
357 MROUTING                opt_mrouting.h
358 PIM                     opt_mrouting.h
359 INET                    opt_inet.h
360 INET6                   opt_inet6.h
361 IPSEC                   opt_ipsec.h
362 IPSEC_ESP               opt_ipsec.h
363 IPSEC_DEBUG             opt_ipsec.h
364 IPSEC_FILTERGIF         opt_ipsec.h
365 FAST_IPSEC              opt_ipsec.h
366 IPDIVERT
367 DUMMYNET                opt_ipdn.h
368 IPFILTER                opt_ipfilter.h
369 IPFILTER_LOG            opt_ipfilter.h
370 IPFILTER_LOOKUP         opt_ipfilter.h
371 IPFILTER_DEFAULT_BLOCK  opt_ipfilter.h
372 IPFIREWALL              opt_ipfw.h
373 IPFIREWALL_VERBOSE      opt_ipfw.h
374 IPFIREWALL_VERBOSE_LIMIT        opt_ipfw.h
375 IPFIREWALL_DEFAULT_TO_ACCEPT    opt_ipfw.h
376 IPFIREWALL_FORWARD      opt_ipfw.h
377 IPSTEALTH
378 IPX
379 IPXIP                   opt_ipx.h
380 LIBMBPOOL
381 LIBMCHAIN
382 LIBALIAS
383 MBUF_STRESS_TEST
384 NCP
385 NETATALK                opt_atalk.h
386 NET_WITH_GIANT          opt_net.h
387 PPP_BSDCOMP             opt_ppp.h
388 PPP_DEFLATE             opt_ppp.h
389 PPP_FILTER              opt_ppp.h
390 SLIP_IFF_OPTS           opt_slip.h
391 TCPDEBUG
392 TCP_SIGNATURE           opt_inet.h
393 TCP_SACK_DEBUG          opt_tcp_sack.h 
394 TCP_DROP_SYNFIN         opt_tcp_input.h
395 DEV_VLAN                opt_vlan.h
396 VLAN_ARRAY              opt_vlan.h
397 XBONEHACK
398
399 # Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
400 # Each netgraph node type can be either be compiled into the kernel
401 # or loaded dynamically. To get the former, include the corresponding
402 # option below. Each type has its own man page, e.g. ng_async(4).
403 NETGRAPH
404 NETGRAPH_DEBUG          opt_netgraph.h
405 NETGRAPH_ASYNC          opt_netgraph.h
406 NETGRAPH_ATMLLC         opt_netgraph.h
407 NETGRAPH_ATM_ATMPIF     opt_netgraph.h
408 NETGRAPH_BLUETOOTH      opt_netgraph.h
409 NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h
410 NETGRAPH_BLUETOOTH_H4   opt_netgraph.h
411 NETGRAPH_BLUETOOTH_HCI  opt_netgraph.h
412 NETGRAPH_BLUETOOTH_L2CAP        opt_netgraph.h
413 NETGRAPH_BLUETOOTH_SOCKET       opt_netgraph.h
414 NETGRAPH_BLUETOOTH_UBT  opt_netgraph.h
415 NETGRAPH_BLUETOOTH_UBTBCMFW     opt_netgraph.h
416 NETGRAPH_BPF            opt_netgraph.h
417 NETGRAPH_BRIDGE         opt_netgraph.h
418 NETGRAPH_CISCO          opt_netgraph.h
419 NETGRAPH_DEVICE         opt_netgraph.h
420 NETGRAPH_ECHO           opt_netgraph.h
421 NETGRAPH_EIFACE         opt_netgraph.h
422 NETGRAPH_ETHER          opt_netgraph.h
423 NETGRAPH_FEC            opt_netgraph.h
424 NETGRAPH_FRAME_RELAY    opt_netgraph.h
425 NETGRAPH_GIF            opt_netgraph.h
426 NETGRAPH_GIF_DEMUX      opt_netgraph.h
427 NETGRAPH_HOLE           opt_netgraph.h
428 NETGRAPH_IFACE          opt_netgraph.h
429 NETGRAPH_IP_INPUT       opt_netgraph.h
430 NETGRAPH_IPFW           opt_netgraph.h
431 NETGRAPH_KSOCKET        opt_netgraph.h
432 NETGRAPH_L2TP           opt_netgraph.h
433 NETGRAPH_LMI            opt_netgraph.h
434 # MPPC compression requires proprietary files (not included)
435 NETGRAPH_MPPC_COMPRESSION       opt_netgraph.h
436 NETGRAPH_MPPC_ENCRYPTION        opt_netgraph.h
437 NETGRAPH_NAT            opt_netgraph.h
438 NETGRAPH_NETFLOW        opt_netgraph.h
439 NETGRAPH_ONE2MANY       opt_netgraph.h
440 NETGRAPH_PPP            opt_netgraph.h
441 NETGRAPH_PPPOE          opt_netgraph.h
442 NETGRAPH_PPTPGRE        opt_netgraph.h
443 NETGRAPH_RFC1490        opt_netgraph.h
444 NETGRAPH_SOCKET         opt_netgraph.h
445 NETGRAPH_SPLIT          opt_netgraph.h
446 NETGRAPH_SPPP           opt_netgraph.h
447 NETGRAPH_TAG            opt_netgraph.h
448 NETGRAPH_TCPMSS         opt_netgraph.h
449 NETGRAPH_TEE            opt_netgraph.h
450 NETGRAPH_TTY            opt_netgraph.h
451 NETGRAPH_UI             opt_netgraph.h
452 NETGRAPH_VJC            opt_netgraph.h
453
454 # NgATM options
455 NGATM_ATM               opt_netgraph.h
456 NGATM_ATMBASE           opt_netgraph.h
457 NGATM_SSCOP             opt_netgraph.h
458 NGATM_SSCFU             opt_netgraph.h
459 NGATM_UNI               opt_netgraph.h
460 NGATM_CCATM             opt_netgraph.h
461
462 # DRM options
463 DRM_DEBUG               opt_drm.h
464
465 ZERO_COPY_SOCKETS       opt_zero.h
466 TI_PRIVATE_JUMBOS       opt_ti.h
467 TI_JUMBO_HDRSPLIT       opt_ti.h
468
469 # ATM (HARP version)
470 ATM_CORE                opt_atm.h
471 ATM_IP                  opt_atm.h
472 ATM_SIGPVC              opt_atm.h
473 ATM_SPANS               opt_atm.h
474 ATM_UNI                 opt_atm.h
475
476 # XXX Conflict: # of devices vs network protocol (Native ATM).
477 # This makes "atm.h" unusable.
478 NATM
479
480 # DPT driver debug flags
481 DPT_MEASURE_PERFORMANCE opt_dpt.h
482 DPT_HANDLE_TIMEOUTS     opt_dpt.h
483 DPT_TIMEOUT_FACTOR      opt_dpt.h
484 DPT_LOST_IRQ            opt_dpt.h
485 DPT_RESET_HBA           opt_dpt.h
486
487 # Misc debug flags.  Most of these should probably be replaced with
488 # 'DEBUG', and then let people recompile just the interesting modules
489 # with 'make CC="cc -DDEBUG"'.
490 CLUSTERDEBUG            opt_debug_cluster.h
491 DEBUG_1284              opt_ppb_1284.h
492 VP0_DEBUG               opt_vpo.h
493 LPT_DEBUG               opt_lpt.h
494 PLIP_DEBUG              opt_plip.h
495 LOCKF_DEBUG             opt_debug_lockf.h
496 NETATALKDEBUG           opt_atalk.h
497 SI_DEBUG                opt_debug_si.h
498
499 # Fb options
500 FB_DEBUG                opt_fb.h
501 FB_INSTALL_CDEV         opt_fb.h
502
503 # ppbus related options
504 PERIPH_1284             opt_ppb_1284.h
505 DONTPROBE_1284          opt_ppb_1284.h
506
507 # smbus related options
508 ENABLE_ALART            opt_intpm.h
509
510 # These cause changes all over the kernel
511 BLKDEV_IOSIZE           opt_global.h
512 BURN_BRIDGES            opt_global.h
513 DEBUG                   opt_global.h
514 DEBUG_LOCKS             opt_global.h
515 DEBUG_VFS_LOCKS         opt_global.h
516 DIAGNOSTIC              opt_global.h
517 INVARIANT_SUPPORT       opt_global.h
518 INVARIANTS              opt_global.h
519 MCLSHIFT                opt_global.h
520 MUTEX_DEBUG             opt_global.h
521 MUTEX_NOINLINE          opt_global.h
522 MUTEX_PROFILING         opt_global.h
523 MSIZE                   opt_global.h
524 REGRESSION              opt_global.h
525 RESTARTABLE_PANICS      opt_global.h
526 RWLOCK_NOINLINE         opt_global.h
527 VFS_BIO_DEBUG           opt_global.h
528
529 # These are VM related options
530 VM_KMEM_SIZE            opt_vm.h
531 VM_KMEM_SIZE_SCALE      opt_vm.h
532 VM_KMEM_SIZE_MAX        opt_vm.h
533 NO_SWAPPING             opt_vm.h
534 MALLOC_MAKE_FAILURES    opt_vm.h
535 MALLOC_PROFILE          opt_vm.h
536 PQ_NOOPT                opt_vmpage.h
537
538 # The MemGuard replacement allocator used for tamper-after-free detection
539 DEBUG_MEMGUARD          opt_vm.h
540
541 # The RedZone malloc(9) protection
542 DEBUG_REDZONE           opt_vm.h
543
544 # Standard SMP options
545 SMP                     opt_global.h
546
547 # Size of the kernel message buffer
548 MSGBUF_SIZE             opt_msgbuf.h
549
550 # NFS options
551 NFS_MINATTRTIMO         opt_nfs.h
552 NFS_MAXATTRTIMO         opt_nfs.h
553 NFS_MINDIRATTRTIMO      opt_nfs.h
554 NFS_MAXDIRATTRTIMO      opt_nfs.h
555 NFS_GATHERDELAY         opt_nfs.h
556 NFS_WDELAYHASHSIZ       opt_nfs.h
557 NFS_DEBUG               opt_nfs.h
558
559 # For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
560 OVERRIDE_CARD                   opt_bktr.h
561 OVERRIDE_TUNER                  opt_bktr.h
562 OVERRIDE_DBX                    opt_bktr.h
563 OVERRIDE_MSP                    opt_bktr.h
564 BROOKTREE_SYSTEM_DEFAULT        opt_bktr.h
565 BROOKTREE_ALLOC_PAGES           opt_bktr.h
566 BKTR_OVERRIDE_CARD              opt_bktr.h
567 BKTR_OVERRIDE_TUNER             opt_bktr.h
568 BKTR_OVERRIDE_DBX               opt_bktr.h
569 BKTR_OVERRIDE_MSP               opt_bktr.h
570 BKTR_SYSTEM_DEFAULT             opt_bktr.h
571 BKTR_ALLOC_PAGES                opt_bktr.h
572 BKTR_USE_PLL                    opt_bktr.h      
573 BKTR_GPIO_ACCESS                opt_bktr.h
574 BKTR_NO_MSP_RESET               opt_bktr.h
575 BKTR_430_FX_MODE                opt_bktr.h
576 BKTR_SIS_VIA_MODE               opt_bktr.h
577 BKTR_USE_FREEBSD_SMBUS          opt_bktr.h
578 BKTR_NEW_MSP34XX_DRIVER         opt_bktr.h
579
580 BREAK_TO_DEBUGGER       opt_comconsole.h
581 ALT_BREAK_TO_DEBUGGER   opt_comconsole.h
582
583 # Options to support PPS
584 UART_PPS_ON_CTS         opt_uart.h
585
586 # options for bus/device framework
587 BUS_DEBUG               opt_bus.h
588
589 # options for USB support
590 USB_DEBUG               opt_usb.h
591 USBVERBOSE              opt_usb.h
592 UKBD_DFLT_KEYMAP        opt_ukbd.h
593 UPLCOM_INTR_INTERVAL    opt_uplcom.h
594 UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h
595 UVSCOM_INTR_INTERVAL    opt_uvscom.h
596
597 # Embedded system options
598 INIT_PATH
599
600 ROOTDEVNAME
601
602 FDC_DEBUG               opt_fdc.h
603 PCFCLOCK_VERBOSE        opt_pcfclock.h
604 PCFCLOCK_MAX_RETRIES    opt_pcfclock.h
605
606 KDTRACE                 opt_kdtrace.h
607 KTR                     opt_global.h
608 KTR_ALQ                 opt_ktr.h
609 KTR_MASK                opt_ktr.h
610 KTR_CPUMASK             opt_ktr.h
611 KTR_COMPILE             opt_global.h
612 KTR_ENTRIES             opt_global.h
613 KTR_VERBOSE             opt_ktr.h
614 WITNESS                 opt_global.h
615 WITNESS_KDB             opt_witness.h
616 WITNESS_SKIPSPIN        opt_witness.h
617
618 # options for ACPI support
619 ACPI_DEBUG              opt_acpi.h
620 ACPI_MAX_THREADS        opt_acpi.h
621 ACPI_NO_SEMAPHORES      opt_acpi.h
622 ACPICA_PEDANTIC         opt_acpi.h
623
624 # ISA support
625 DEV_ISA                 opt_isa.h
626 ISAPNP                  opt_isa.h
627
628 # various 'device presence' options.
629 DEV_BPF                 opt_bpf.h
630 DEV_MCA                 opt_mca.h
631 DEV_CARP                opt_carp.h
632 DEV_SPLASH              opt_splash.h
633
634 EISA_SLOTS              opt_eisa.h
635
636 # ed driver
637 ED_HPP                  opt_ed.h
638 ED_3C503                opt_ed.h
639 ED_SIC                  opt_ed.h
640
641 # bce driver
642 BCE_DEBUG               opt_bce.h
643
644 # wi driver
645 WI_SYMBOL_FIRMWARE      opt_wi.h
646
647 SOCKBUF_DEBUG           opt_global.h
648
649 # options for ubsec driver
650 UBSEC_DEBUG             opt_ubsec.h
651 UBSEC_RNDTEST           opt_ubsec.h
652 UBSEC_NO_RNG            opt_ubsec.h
653
654 # options for hifn driver
655 HIFN_DEBUG              opt_hifn.h
656 HIFN_RNDTEST            opt_hifn.h
657
658 # options for safenet driver
659 SAFE_DEBUG              opt_safe.h
660 SAFE_NO_RNG             opt_safe.h
661 SAFE_RNDTEST            opt_safe.h
662
663 # syscons options
664 MAXCONS                 opt_syscons.h
665 SC_ALT_MOUSE_IMAGE      opt_syscons.h
666 SC_CUT_SPACES2TABS      opt_syscons.h
667 SC_CUT_SEPCHARS         opt_syscons.h
668 SC_DEBUG_LEVEL          opt_syscons.h
669 SC_DFLT_FONT            opt_syscons.h
670 SC_DISABLE_KDBKEY       opt_syscons.h
671 SC_DISABLE_REBOOT       opt_syscons.h
672 SC_HISTORY_SIZE         opt_syscons.h
673 SC_KERNEL_CONS_ATTR     opt_syscons.h
674 SC_KERNEL_CONS_REV_ATTR opt_syscons.h
675 SC_MOUSE_CHAR           opt_syscons.h
676 SC_NO_CUTPASTE          opt_syscons.h
677 SC_NO_FONT_LOADING      opt_syscons.h
678 SC_NO_HISTORY           opt_syscons.h
679 SC_NO_SUSPEND_VTYSWITCH opt_syscons.h
680 SC_NO_SYSMOUSE          opt_syscons.h
681 SC_NORM_ATTR            opt_syscons.h
682 SC_NORM_REV_ATTR        opt_syscons.h
683 SC_PIXEL_MODE           opt_syscons.h
684 SC_RENDER_DEBUG         opt_syscons.h
685 SC_TWOBUTTON_MOUSE      opt_syscons.h
686
687 # kbd options
688 KBD_DISABLE_KEYMAP_LOAD opt_kbd.h
689 KBD_INSTALL_CDEV        opt_kbd.h
690 KBD_MAXRETRY            opt_kbd.h
691 KBD_MAXWAIT             opt_kbd.h
692 KBD_RESETDELAY          opt_kbd.h
693 KBDIO_DEBUG             opt_kbd.h
694
695 # options for the Atheros driver
696 ATH_DEBUG               opt_ath.h
697 ATH_TXBUF               opt_ath.h
698 ATH_RXBUF               opt_ath.h
699 ATH_DIAGAPI             opt_ath.h
700 ATH_TX99_DIAG           opt_ath.h
701
702 # dcons options 
703 DCONS_BUF_SIZE          opt_dcons.h
704 DCONS_POLL_HZ           opt_dcons.h
705 DCONS_FORCE_CONSOLE     opt_dcons.h
706 DCONS_FORCE_GDB         opt_dcons.h
707
708 # Static unit counts
709 NI4BTRC                 opt_i4b.h
710 NI4BRBCH                opt_i4b.h
711 NI4BTEL                 opt_i4b.h
712 NI4BIPR                 opt_i4b.h
713 NI4BING                 opt_i4b.h
714 NI4BISPPP               opt_i4b.h
715
716 # VFS options
717 LOOKUP_SHARED           opt_vfs.h
718
719 # HWPMC options
720 HWPMC_HOOKS
721
722 # XBOX options for FreeBSD/i386, but some files are MI
723 XBOX                    opt_xbox.h
724
725 # XFS
726 XFS
727
728 # snd_emu10kx sound driver options
729 SND_EMU10KX_MULTICHANNEL        opt_emu10kx.h