]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - sys/conf/options
This commit was generated by cvs2svn to compensate for changes in r173619,
[FreeBSD/FreeBSD.git] / sys / conf / options
1 # $FreeBSD$
2 #
3 #        On the handling of kernel options
4 #
5 # All kernel options should be listed in NOTES, with suitable
6 # descriptions.  Negative options (options that make some code not
7 # compile) should be commented out; LINT (generated from NOTES) should
8 # compile as much code as possible.  Try to structure option-using
9 # code so that a single option only switch code on, or only switch
10 # code off, to make it possible to have a full compile-test.  If
11 # necessary, you can check for COMPILING_LINT to get maximum code
12 # coverage.
13 #
14 # All new options shall also be listed in either "conf/options" or
15 # "conf/options.<machine>".  Options that affect a single source-file
16 # <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options
17 # that affect multiple files should either go in "opt_global.h" if
18 # this is a kernel-wide option (used just about everywhere), or in
19 # "opt_<option-name-in-lower-case>.h" if it affects only some files.
20 # Note that the effect of listing only an option without a
21 # header-file-name in conf/options (and cousins) is that the last
22 # convention is followed.
23 #
24 # This handling scheme is not yet fully implemented.
25 #
26 #
27 # Format of this file:
28 # Option name   filename
29 #
30 # If filename is missing, the default is
31 # opt_<name-of-option-in-lower-case>.h
32
33 AAC_DEBUG               opt_aac.h
34 AHC_ALLOW_MEMIO         opt_aic7xxx.h
35 AHC_TMODE_ENABLE        opt_aic7xxx.h
36 AHC_DUMP_EEPROM         opt_aic7xxx.h
37 AHC_DEBUG               opt_aic7xxx.h
38 AHC_DEBUG_OPTS          opt_aic7xxx.h
39 AHC_REG_PRETTY_PRINT    opt_aic7xxx.h
40 AHD_DEBUG               opt_aic79xx.h
41 AHD_DEBUG_OPTS          opt_aic79xx.h
42 AHD_TMODE_ENABLE        opt_aic79xx.h   
43 AHD_REG_PRETTY_PRINT    opt_aic79xx.h
44 ADW_ALLOW_MEMIO         opt_adw.h
45
46 TWA_DEBUG               opt_twa.h
47 TWA_FLASH_FIRMWARE      opt_twa.h
48
49 # Debugging options.
50 DDB
51 DDB_NUMSYM      opt_ddb.h
52 GDB
53 KDB             opt_global.h
54 KDB_TRACE       opt_kdb.h
55 KDB_UNATTENDED  opt_kdb.h
56 SYSCTL_DEBUG    opt_sysctl.h
57
58 NO_SYSCTL_DESCR opt_global.h
59
60 # Miscellaneous options.
61 ADAPTIVE_GIANT  opt_adaptive_mutexes.h
62 ADAPTIVE_SX
63 ALQ
64 AUDIT           opt_global.h
65 CODA_COMPAT_5   opt_coda.h
66 COMPAT_43       opt_compat.h
67 COMPAT_43TTY    opt_compat.h
68 COMPAT_FREEBSD4 opt_compat.h
69 COMPAT_FREEBSD5 opt_compat.h
70 COMPAT_FREEBSD6 opt_compat.h
71 COMPILING_LINT  opt_global.h
72 CY_PCI_FASTINTR
73 DIRECTIO
74 FULL_PREEMPTION opt_sched.h
75 IPI_PREEMPTION  opt_sched.h
76 GEOM_AES        opt_geom.h
77 GEOM_BDE        opt_geom.h
78 GEOM_BSD        opt_geom.h
79 GEOM_CACHE      opt_geom.h
80 GEOM_CONCAT     opt_geom.h
81 GEOM_ELI        opt_geom.h
82 GEOM_FOX        opt_geom.h
83 GEOM_GATE       opt_geom.h
84 GEOM_JOURNAL    opt_geom.h
85 GEOM_LABEL      opt_geom.h
86 GEOM_MBR        opt_geom.h
87 GEOM_MIRROR     opt_geom.h
88 GEOM_MULTIPATH  opt_geom.h
89 GEOM_NOP        opt_geom.h
90 GEOM_PART_APM   opt_geom.h
91 GEOM_PART_GPT   opt_geom.h
92 GEOM_PART_MBR   opt_geom.h
93 GEOM_PC98       opt_geom.h
94 GEOM_RAID3      opt_geom.h
95 GEOM_SHSEC      opt_geom.h
96 GEOM_STRIPE     opt_geom.h
97 GEOM_SUNLABEL   opt_geom.h
98 GEOM_UZIP       opt_geom.h
99 GEOM_VIRSTOR    opt_geom.h
100 GEOM_VOL        opt_geom.h
101 GEOM_ZERO       opt_geom.h
102 KSE             opt_global.h
103 KSTACK_MAX_PAGES
104 KSTACK_PAGES
105 KTRACE
106 KTRACE_REQUEST_POOL     opt_ktrace.h
107 LIBICONV
108 MAC
109 MAC_ALWAYS_LABEL_MBUF   opt_mac.h
110 MAC_BIBA        opt_dontuse.h
111 MAC_BSDEXTENDED opt_dontuse.h
112 MAC_IFOFF       opt_dontuse.h
113 MAC_LOMAC       opt_dontuse.h
114 MAC_MLS         opt_dontuse.h
115 MAC_NONE        opt_dontuse.h
116 MAC_PARTITION   opt_dontuse.h
117 MAC_PORTACL     opt_dontuse.h
118 MAC_SEEOTHERUIDS        opt_dontuse.h
119 MAC_STATIC      opt_mac.h
120 MAC_STUB        opt_dontuse.h
121 MAC_TEST        opt_dontuse.h
122 MD_ROOT         opt_md.h
123 MD_ROOT_SIZE    opt_md.h
124 MFI_DEBUG       opt_mfi.h
125 MFI_DECODE_LOG  opt_mfi.h
126 MPROF_BUFFERS   opt_mprof.h
127 MPROF_HASH_SIZE opt_mprof.h
128 NO_ADAPTIVE_MUTEXES     opt_adaptive_mutexes.h
129 NO_ADAPTIVE_RWLOCKS
130 NSWBUF_MIN      opt_swap.h
131 MBUF_PACKET_ZONE_DISABLE        opt_global.h
132 PANIC_REBOOT_WAIT_TIME  opt_panic.h
133 PPC_DEBUG       opt_ppc.h
134 PPC_PROBE_CHIPSET opt_ppc.h
135 PPS_SYNC        opt_ntp.h
136 PREEMPTION      opt_sched.h
137 QUOTA
138 SCHED_4BSD      opt_sched.h
139 SCHED_ULE       opt_sched.h
140 SHOW_BUSYBUFS
141 SLEEPQUEUE_PROFILING
142 SLHCI_DEBUG     opt_slhci.h
143 SPX_HACK
144 SUIDDIR
145 MSGMNB          opt_sysvipc.h
146 MSGMNI          opt_sysvipc.h
147 MSGSEG          opt_sysvipc.h
148 MSGSSZ          opt_sysvipc.h
149 MSGTQL          opt_sysvipc.h
150 SEMMAP          opt_sysvipc.h
151 SEMMNI          opt_sysvipc.h
152 SEMMNS          opt_sysvipc.h
153 SEMMNU          opt_sysvipc.h
154 SEMMSL          opt_sysvipc.h
155 SEMOPM          opt_sysvipc.h
156 SEMUME          opt_sysvipc.h
157 SHMALL          opt_sysvipc.h
158 SHMMAX          opt_sysvipc.h
159 SHMMAXPGS       opt_sysvipc.h
160 SHMMIN          opt_sysvipc.h
161 SHMMNI          opt_sysvipc.h
162 SHMSEG          opt_sysvipc.h
163 SYSVMSG         opt_sysvipc.h
164 SYSVSEM         opt_sysvipc.h
165 SYSVSHM         opt_sysvipc.h
166 SW_WATCHDOG     opt_watchdog.h
167 TURNSTILE_PROFILING
168 TTYHOG          opt_tty.h
169 VFS_AIO
170 VERBOSE_SYSINIT opt_global.h
171 WLCACHE         opt_wavelan.h
172 WLDEBUG         opt_wavelan.h
173
174 # POSIX kernel options
175 P1003_1B_MQUEUE                 opt_posix.h
176 P1003_1B_SEMAPHORES             opt_posix.h
177 _KPOSIX_PRIORITY_SCHEDULING     opt_posix.h
178
179 # Do we want the config file compiled into the kernel?
180 INCLUDE_CONFIG_FILE     opt_config.h
181
182 # Options for static filesystems.  These should only be used at config
183 # time, since the corresponding lkms cannot work if there are any static
184 # dependencies.  Unusability is enforced by hiding the defines for the
185 # options in a never-included header.
186 CD9660          opt_dontuse.h
187 CODA            opt_dontuse.h
188 EXT2FS          opt_dontuse.h
189 FDESCFS         opt_dontuse.h
190 HPFS            opt_dontuse.h
191 MSDOSFS         opt_dontuse.h
192 NTFS            opt_dontuse.h
193 NULLFS          opt_dontuse.h
194 NWFS            opt_dontuse.h
195 PORTALFS        opt_dontuse.h
196 PROCFS          opt_dontuse.h
197 PSEUDOFS        opt_dontuse.h
198 REISERFS        opt_dontuse.h
199 SMBFS           opt_dontuse.h
200 TMPFS           opt_dontuse.h
201 UDF             opt_dontuse.h
202 UNIONFS         opt_dontuse.h
203
204 # Pseudofs debugging
205 PSEUDOFS_TRACE  opt_pseudofs.h
206
207 # Broken - ffs_snapshot() dependency from ufs_lookup() :-(
208 FFS             opt_ffs_broken_fixme.h
209
210 # These static filesystems have one slightly bogus static dependency in
211 # sys/i386/i386/autoconf.c.  If any of these filesystems are
212 # statically compiled into the kernel, code for mounting them as root
213 # filesystems will be enabled - but look below.
214 NFSCLIENT       opt_nfs.h
215 NFSSERVER       opt_nfs.h
216 NFS4CLIENT      opt_nfs.h
217
218 # filesystems and libiconv bridge
219 CD9660_ICONV    opt_dontuse.h
220 MSDOSFS_ICONV   opt_dontuse.h
221 NTFS_ICONV      opt_dontuse.h
222 UDF_ICONV       opt_dontuse.h
223
224 # If you are following the conditions in the copyright,
225 # you can enable soft-updates which will speed up a lot of thigs
226 # and make the system safer from crashes at the same time.
227 # otherwise a STUB module will be compiled in.
228 SOFTUPDATES     opt_ffs.h
229
230 # On small, embedded systems, it can be useful to turn off support for
231 # snapshots.  It saves about 30-40k for a feature that would be lightly
232 # used, if it is used at all.
233 NO_FFS_SNAPSHOT opt_ffs.h
234
235 # Enabling this option turns on support for Access Control Lists in UFS,
236 # which can be used to support high security configurations.  Depends on
237 # UFS_EXTATTR.
238 UFS_ACL         opt_ufs.h
239
240 # Enabling this option turns on support for extended attributes in UFS-based
241 # filesystems, which can be used to support high security configurations
242 # as well as new filesystem features.
243 UFS_EXTATTR     opt_ufs.h
244 UFS_EXTATTR_AUTOSTART   opt_ufs.h
245
246 # Enable fast hash lookups for large directories on UFS-based filesystems.
247 UFS_DIRHASH     opt_ufs.h
248
249 # Enable gjournal-based UFS journal.
250 UFS_GJOURNAL    opt_ufs.h
251
252 # The below sentence is not in English, and neither is this one.
253 # We plan to remove the static dependences above, with a
254 # <filesystem>_ROOT option to control if it usable as root.  This list
255 # allows these options to be present in config files already (though
256 # they won't make any difference yet).
257 NFS_ROOT        opt_nfsroot.h
258
259 # SMB/CIFS requester
260 NETSMB          opt_netsmb.h
261
262 # Options used only in subr_param.c.
263 HZ              opt_param.h
264 MAXFILES        opt_param.h
265 NBUF            opt_param.h
266 NSFBUFS         opt_param.h
267 VM_BCACHE_SIZE_MAX      opt_param.h
268 VM_SWZONE_SIZE_MAX      opt_param.h
269 MAXUSERS
270 DFLDSIZ         opt_param.h
271 MAXDSIZ         opt_param.h
272 MAXSSIZ         opt_param.h
273
274 # Generic SCSI options.
275 CAM_MAX_HIGHPOWER       opt_cam.h
276 CAMDEBUG                opt_cam.h
277 CAM_DEBUG_DELAY         opt_cam.h
278 CAM_DEBUG_BUS           opt_cam.h
279 CAM_DEBUG_TARGET        opt_cam.h
280 CAM_DEBUG_LUN           opt_cam.h
281 CAM_DEBUG_FLAGS         opt_cam.h
282 SCSI_DELAY              opt_scsi.h
283 SCSI_NO_SENSE_STRINGS   opt_scsi.h
284 SCSI_NO_OP_STRINGS      opt_scsi.h
285
286 # Options used only in cam/scsi/scsi_cd.c
287 CHANGER_MIN_BUSY_SECONDS        opt_cd.h
288 CHANGER_MAX_BUSY_SECONDS        opt_cd.h
289
290 # Options used only in cam/scsi/scsi_sa.c.
291 SA_IO_TIMEOUT           opt_sa.h
292 SA_SPACE_TIMEOUT        opt_sa.h
293 SA_REWIND_TIMEOUT       opt_sa.h
294 SA_ERASE_TIMEOUT        opt_sa.h
295 SA_1FM_AT_EOD           opt_sa.h
296
297 # Options used only in cam/scsi/scsi_pt.c
298 SCSI_PT_DEFAULT_TIMEOUT opt_pt.h
299
300 # Options used only in cam/scsi/scsi_ses.c
301 SES_ENABLE_PASSTHROUGH  opt_ses.h
302
303 # Options used in dev/sym/ (Symbios SCSI driver).
304 SYM_SETUP_LP_PROBE_MAP  opt_sym.h       #-Low Priority Probe Map (bits)
305                                         # Allows the ncr to take precedence
306                                         # 1 (1<<0) -> 810a, 860
307                                         # 2 (1<<1) -> 825a, 875, 885, 895
308                                         # 4 (1<<2) -> 895a, 896, 1510d 
309 SYM_SETUP_SCSI_DIFF     opt_sym.h       #-HVD support for 825a, 875, 885
310                                         # disabled:0 (default), enabled:1
311 SYM_SETUP_PCI_PARITY    opt_sym.h       #-PCI parity checking
312                                         # disabled:0, enabled:1 (default)
313 SYM_SETUP_MAX_LUN       opt_sym.h       #-Number of LUNs supported
314                                         # default:8, range:[1..64]
315
316 # Options used only in pci/ncr.c
317 SCSI_NCR_DEBUG          opt_ncr.h
318 SCSI_NCR_MAX_SYNC       opt_ncr.h
319 SCSI_NCR_MAX_WIDE       opt_ncr.h
320 SCSI_NCR_MYADDR         opt_ncr.h
321
322 # Options used only in dev/isp/*
323 ISP_TARGET_MODE         opt_isp.h
324 ISP_FW_CRASH_DUMP       opt_isp.h
325 ISP_DEFAULT_ROLES       opt_isp.h
326
327 # Options used only in dev/iscsi
328 ISCSI_INITIATOR_DEBUG   opt_iscsi_initiator.h
329
330 # Options used in the 'ata' ATA/ATAPI driver
331 ATA_STATIC_ID           opt_ata.h
332 ATA_NOPCI               opt_ata.h
333
334 # Net stuff.
335 ACCEPT_FILTER_DATA
336 ACCEPT_FILTER_HTTP
337 ALTQ                    opt_global.h
338 ALTQ_CBQ                opt_altq.h
339 ALTQ_RED                opt_altq.h
340 ALTQ_RIO                opt_altq.h
341 ALTQ_HFSC               opt_altq.h
342 ALTQ_CDNR               opt_altq.h
343 ALTQ_PRIQ               opt_altq.h
344 ALTQ_NOPCC              opt_altq.h
345 ALTQ_DEBUG              opt_altq.h
346 BOOTP                   opt_bootp.h
347 BOOTP_COMPAT            opt_bootp.h
348 BOOTP_NFSROOT           opt_bootp.h
349 BOOTP_NFSV3             opt_bootp.h
350 BOOTP_WIRED_TO          opt_bootp.h
351 DEVICE_POLLING
352 DEV_ENC                 opt_enc.h
353 DEV_PF                  opt_pf.h
354 DEV_PFLOG               opt_pf.h
355 DEV_PFSYNC              opt_pf.h
356 ETHER_II                opt_ef.h
357 ETHER_8023              opt_ef.h
358 ETHER_8022              opt_ef.h
359 ETHER_SNAP              opt_ef.h
360 MROUTING                opt_mrouting.h
361 INET                    opt_inet.h
362 INET6                   opt_inet6.h
363 IPSEC                   opt_ipsec.h
364 IPSEC_DEBUG             opt_ipsec.h
365 IPSEC_FILTERTUNNEL      opt_ipsec.h
366 IPDIVERT
367 DUMMYNET                opt_ipdn.h
368 IPFILTER                opt_ipfilter.h
369 IPFILTER_LOG            opt_ipfilter.h
370 IPFILTER_LOOKUP         opt_ipfilter.h
371 IPFILTER_DEFAULT_BLOCK  opt_ipfilter.h
372 IPFIREWALL              opt_ipfw.h
373 IPFIREWALL_VERBOSE      opt_ipfw.h
374 IPFIREWALL_VERBOSE_LIMIT        opt_ipfw.h
375 IPFIREWALL_DEFAULT_TO_ACCEPT    opt_ipfw.h
376 IPFIREWALL_FORWARD      opt_ipfw.h
377 IPFIREWALL_NAT          opt_ipfw.h
378 IPSTEALTH
379 IPX
380 LIBMBPOOL
381 LIBMCHAIN
382 LIBALIAS
383 MBUF_STRESS_TEST
384 NCP
385 NETATALK                opt_atalk.h
386 PPP_BSDCOMP             opt_ppp.h
387 PPP_DEFLATE             opt_ppp.h
388 PPP_FILTER              opt_ppp.h
389 SLIP_IFF_OPTS           opt_slip.h
390 TCPDEBUG
391 TCP_SIGNATURE           opt_inet.h
392 DEV_VLAN                opt_vlan.h
393 VLAN_ARRAY              opt_vlan.h
394 XBONEHACK
395
396 #
397 # SCTP
398 #
399 SCTP                    opt_sctp.h
400 SCTP_DEBUG              opt_sctp.h # Enable debug printfs
401 SCTP_WITH_NO_CSUM       opt_sctp.h # Use this at your peril
402 SCTP_LOCK_LOGGING       opt_sctp.h # Log to KTR lock activity
403 SCTP_MBUF_LOGGING       opt_sctp.h # Log to KTR general mbuf aloc/free
404 SCTP_MBCNT_LOGGING      opt_sctp.h # Log to KTR mbcnt activity
405 SCTP_PACKET_LOGGING     opt_sctp.h # Log to a packet buffer last N packets
406 SCTP_LTRACE_CHUNKS      opt_sctp.h # Log to KTR chunks processed
407 SCTP_LTRACE_ERRORS      opt_sctp.h # Log to KTR error returns.
408 #
409 #
410 #
411
412 # Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
413 # Each netgraph node type can be either be compiled into the kernel
414 # or loaded dynamically. To get the former, include the corresponding
415 # option below. Each type has its own man page, e.g. ng_async(4).
416 NETGRAPH
417 NETGRAPH_DEBUG          opt_netgraph.h
418 NETGRAPH_ASYNC          opt_netgraph.h
419 NETGRAPH_ATMLLC         opt_netgraph.h
420 NETGRAPH_ATM_ATMPIF     opt_netgraph.h
421 NETGRAPH_BLUETOOTH      opt_netgraph.h
422 NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h
423 NETGRAPH_BLUETOOTH_H4   opt_netgraph.h
424 NETGRAPH_BLUETOOTH_HCI  opt_netgraph.h
425 NETGRAPH_BLUETOOTH_L2CAP        opt_netgraph.h
426 NETGRAPH_BLUETOOTH_SOCKET       opt_netgraph.h
427 NETGRAPH_BLUETOOTH_UBT  opt_netgraph.h
428 NETGRAPH_BLUETOOTH_UBTBCMFW     opt_netgraph.h
429 NETGRAPH_BPF            opt_netgraph.h
430 NETGRAPH_BRIDGE         opt_netgraph.h
431 NETGRAPH_CAR            opt_netgraph.h
432 NETGRAPH_CISCO          opt_netgraph.h
433 NETGRAPH_DEFLATE        opt_netgraph.h
434 NETGRAPH_DEVICE         opt_netgraph.h
435 NETGRAPH_ECHO           opt_netgraph.h
436 NETGRAPH_EIFACE         opt_netgraph.h
437 NETGRAPH_ETHER          opt_netgraph.h
438 NETGRAPH_FEC            opt_netgraph.h
439 NETGRAPH_FRAME_RELAY    opt_netgraph.h
440 NETGRAPH_GIF            opt_netgraph.h
441 NETGRAPH_GIF_DEMUX      opt_netgraph.h
442 NETGRAPH_HOLE           opt_netgraph.h
443 NETGRAPH_IFACE          opt_netgraph.h
444 NETGRAPH_IP_INPUT       opt_netgraph.h
445 NETGRAPH_IPFW           opt_netgraph.h
446 NETGRAPH_KSOCKET        opt_netgraph.h
447 NETGRAPH_L2TP           opt_netgraph.h
448 NETGRAPH_LMI            opt_netgraph.h
449 # MPPC compression requires proprietary files (not included)
450 NETGRAPH_MPPC_COMPRESSION       opt_netgraph.h
451 NETGRAPH_MPPC_ENCRYPTION        opt_netgraph.h
452 NETGRAPH_NAT            opt_netgraph.h
453 NETGRAPH_NETFLOW        opt_netgraph.h
454 NETGRAPH_ONE2MANY       opt_netgraph.h
455 NETGRAPH_PPP            opt_netgraph.h
456 NETGRAPH_PPPOE          opt_netgraph.h
457 NETGRAPH_PPTPGRE        opt_netgraph.h
458 NETGRAPH_PRED1          opt_netgraph.h
459 NETGRAPH_RFC1490        opt_netgraph.h
460 NETGRAPH_SOCKET         opt_netgraph.h
461 NETGRAPH_SPLIT          opt_netgraph.h
462 NETGRAPH_SPPP           opt_netgraph.h
463 NETGRAPH_TAG            opt_netgraph.h
464 NETGRAPH_TCPMSS         opt_netgraph.h
465 NETGRAPH_TEE            opt_netgraph.h
466 NETGRAPH_TTY            opt_netgraph.h
467 NETGRAPH_UI             opt_netgraph.h
468 NETGRAPH_VJC            opt_netgraph.h
469
470 # NgATM options
471 NGATM_ATM               opt_netgraph.h
472 NGATM_ATMBASE           opt_netgraph.h
473 NGATM_SSCOP             opt_netgraph.h
474 NGATM_SSCFU             opt_netgraph.h
475 NGATM_UNI               opt_netgraph.h
476 NGATM_CCATM             opt_netgraph.h
477
478 # DRM options
479 DRM_DEBUG               opt_drm.h
480
481 ZERO_COPY_SOCKETS       opt_zero.h
482 TI_PRIVATE_JUMBOS       opt_ti.h
483 TI_JUMBO_HDRSPLIT       opt_ti.h
484
485 # ATM (HARP version) - disabled as not MPSAFE in 7.0
486 #ATM_CORE               opt_atm.h
487 #ATM_IP                 opt_atm.h
488 #ATM_SIGPVC             opt_atm.h
489 #ATM_SPANS              opt_atm.h
490 #ATM_UNI                        opt_atm.h
491
492 # XXX Conflict: # of devices vs network protocol (Native ATM).
493 # This makes "atm.h" unusable.
494 NATM
495
496 # DPT driver debug flags
497 DPT_MEASURE_PERFORMANCE opt_dpt.h
498 DPT_HANDLE_TIMEOUTS     opt_dpt.h
499 DPT_TIMEOUT_FACTOR      opt_dpt.h
500 DPT_LOST_IRQ            opt_dpt.h
501 DPT_RESET_HBA           opt_dpt.h
502
503 # Misc debug flags.  Most of these should probably be replaced with
504 # 'DEBUG', and then let people recompile just the interesting modules
505 # with 'make CC="cc -DDEBUG"'.
506 CLUSTERDEBUG            opt_debug_cluster.h
507 DEBUG_1284              opt_ppb_1284.h
508 VP0_DEBUG               opt_vpo.h
509 LPT_DEBUG               opt_lpt.h
510 PLIP_DEBUG              opt_plip.h
511 LOCKF_DEBUG             opt_debug_lockf.h
512 NETATALKDEBUG           opt_atalk.h
513 SI_DEBUG                opt_debug_si.h
514
515 # Fb options
516 FB_DEBUG                opt_fb.h
517 FB_INSTALL_CDEV         opt_fb.h
518
519 # ppbus related options
520 PERIPH_1284             opt_ppb_1284.h
521 DONTPROBE_1284          opt_ppb_1284.h
522
523 # smbus related options
524 ENABLE_ALART            opt_intpm.h
525
526 # These cause changes all over the kernel
527 BLKDEV_IOSIZE           opt_global.h
528 MAXPHYS                 opt_global.h
529 DFLTPHYS                opt_global.h
530 BURN_BRIDGES            opt_global.h
531 DEBUG                   opt_global.h
532 DEBUG_LOCKS             opt_global.h
533 DEBUG_VFS_LOCKS         opt_global.h
534 DIAGNOSTIC              opt_global.h
535 INVARIANT_SUPPORT       opt_global.h
536 INVARIANTS              opt_global.h
537 MCLSHIFT                opt_global.h
538 MUTEX_DEBUG             opt_global.h
539 MUTEX_NOINLINE          opt_global.h
540 LOCK_PROFILING          opt_global.h
541 LOCK_PROFILING_FAST     opt_global.h
542 LOCK_PROFILING_SHARED   opt_global.h
543 MSIZE                   opt_global.h
544 REGRESSION              opt_global.h
545 RESTARTABLE_PANICS      opt_global.h
546 RWLOCK_NOINLINE         opt_global.h
547 SX_NOINLINE             opt_global.h
548 VFS_BIO_DEBUG           opt_global.h
549
550 # These are VM related options
551 VM_KMEM_SIZE            opt_vm.h
552 VM_KMEM_SIZE_SCALE      opt_vm.h
553 VM_KMEM_SIZE_MAX        opt_vm.h
554 NO_SWAPPING             opt_vm.h
555 MALLOC_MAKE_FAILURES    opt_vm.h
556 MALLOC_PROFILE          opt_vm.h
557
558 # The MemGuard replacement allocator used for tamper-after-free detection
559 DEBUG_MEMGUARD          opt_vm.h
560
561 # The RedZone malloc(9) protection
562 DEBUG_REDZONE           opt_vm.h
563
564 # Standard SMP options
565 SMP                     opt_global.h
566
567 # Size of the kernel message buffer
568 MSGBUF_SIZE             opt_msgbuf.h
569
570 # NFS options
571 NFS_MINATTRTIMO         opt_nfs.h
572 NFS_MAXATTRTIMO         opt_nfs.h
573 NFS_MINDIRATTRTIMO      opt_nfs.h
574 NFS_MAXDIRATTRTIMO      opt_nfs.h
575 NFS_GATHERDELAY         opt_nfs.h
576 NFS_WDELAYHASHSIZ       opt_nfs.h
577 NFS_DEBUG               opt_nfs.h
578
579 # For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
580 OVERRIDE_CARD                   opt_bktr.h
581 OVERRIDE_TUNER                  opt_bktr.h
582 OVERRIDE_DBX                    opt_bktr.h
583 OVERRIDE_MSP                    opt_bktr.h
584 BROOKTREE_SYSTEM_DEFAULT        opt_bktr.h
585 BROOKTREE_ALLOC_PAGES           opt_bktr.h
586 BKTR_OVERRIDE_CARD              opt_bktr.h
587 BKTR_OVERRIDE_TUNER             opt_bktr.h
588 BKTR_OVERRIDE_DBX               opt_bktr.h
589 BKTR_OVERRIDE_MSP               opt_bktr.h
590 BKTR_SYSTEM_DEFAULT             opt_bktr.h
591 BKTR_ALLOC_PAGES                opt_bktr.h
592 BKTR_USE_PLL                    opt_bktr.h      
593 BKTR_GPIO_ACCESS                opt_bktr.h
594 BKTR_NO_MSP_RESET               opt_bktr.h
595 BKTR_430_FX_MODE                opt_bktr.h
596 BKTR_SIS_VIA_MODE               opt_bktr.h
597 BKTR_USE_FREEBSD_SMBUS          opt_bktr.h
598 BKTR_NEW_MSP34XX_DRIVER         opt_bktr.h
599
600 BREAK_TO_DEBUGGER       opt_comconsole.h
601 ALT_BREAK_TO_DEBUGGER   opt_comconsole.h
602
603 # Options to support PPS
604 UART_PPS_ON_CTS         opt_uart.h
605
606 # options for bus/device framework
607 BUS_DEBUG               opt_bus.h
608
609 # options for USB support
610 USB_DEBUG               opt_usb.h
611 USBVERBOSE              opt_usb.h
612 UKBD_DFLT_KEYMAP        opt_ukbd.h
613 UPLCOM_INTR_INTERVAL    opt_uplcom.h
614 UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h
615 UVSCOM_INTR_INTERVAL    opt_uvscom.h
616
617 # Embedded system options
618 INIT_PATH
619
620 ROOTDEVNAME
621
622 FDC_DEBUG               opt_fdc.h
623 PCFCLOCK_VERBOSE        opt_pcfclock.h
624 PCFCLOCK_MAX_RETRIES    opt_pcfclock.h
625
626 KTR                     opt_global.h
627 KTR_ALQ                 opt_ktr.h
628 KTR_MASK                opt_ktr.h
629 KTR_CPUMASK             opt_ktr.h
630 KTR_COMPILE             opt_global.h
631 KTR_ENTRIES             opt_global.h
632 KTR_VERBOSE             opt_ktr.h
633 WITNESS                 opt_global.h
634 WITNESS_KDB             opt_witness.h
635 WITNESS_SKIPSPIN        opt_witness.h
636
637 # options for ACPI support
638 ACPI_DEBUG              opt_acpi.h
639 ACPI_MAX_THREADS        opt_acpi.h
640 ACPI_NO_SEMAPHORES      opt_acpi.h
641
642 # ISA support
643 DEV_ISA                 opt_isa.h
644 ISAPNP                  opt_isa.h
645
646 # various 'device presence' options.
647 DEV_BPF                 opt_bpf.h
648 DEV_MCA                 opt_mca.h
649 DEV_CARP                opt_carp.h
650 DEV_SPLASH              opt_splash.h
651
652 # EISA support
653 DEV_EISA                opt_eisa.h
654 EISA_SLOTS              opt_eisa.h
655
656 # ed driver
657 ED_HPP                  opt_ed.h
658 ED_3C503                opt_ed.h
659 ED_SIC                  opt_ed.h
660
661 # bce driver
662 BCE_DEBUG               opt_bce.h
663
664 # wi driver
665 WI_SYMBOL_FIRMWARE      opt_wi.h
666
667 SOCKBUF_DEBUG           opt_global.h
668
669 # options for ubsec driver
670 UBSEC_DEBUG             opt_ubsec.h
671 UBSEC_RNDTEST           opt_ubsec.h
672 UBSEC_NO_RNG            opt_ubsec.h
673
674 # options for hifn driver
675 HIFN_DEBUG              opt_hifn.h
676 HIFN_RNDTEST            opt_hifn.h
677
678 # options for safenet driver
679 SAFE_DEBUG              opt_safe.h
680 SAFE_NO_RNG             opt_safe.h
681 SAFE_RNDTEST            opt_safe.h
682
683 # syscons options
684 MAXCONS                 opt_syscons.h
685 SC_ALT_MOUSE_IMAGE      opt_syscons.h
686 SC_CUT_SPACES2TABS      opt_syscons.h
687 SC_CUT_SEPCHARS         opt_syscons.h
688 SC_DEBUG_LEVEL          opt_syscons.h
689 SC_DFLT_FONT            opt_syscons.h
690 SC_DISABLE_KDBKEY       opt_syscons.h
691 SC_DISABLE_REBOOT       opt_syscons.h
692 SC_HISTORY_SIZE         opt_syscons.h
693 SC_KERNEL_CONS_ATTR     opt_syscons.h
694 SC_KERNEL_CONS_REV_ATTR opt_syscons.h
695 SC_MOUSE_CHAR           opt_syscons.h
696 SC_NO_CUTPASTE          opt_syscons.h
697 SC_NO_FONT_LOADING      opt_syscons.h
698 SC_NO_HISTORY           opt_syscons.h
699 SC_NO_MODE_CHANGE       opt_syscons.h
700 SC_NO_SUSPEND_VTYSWITCH opt_syscons.h
701 SC_NO_SYSMOUSE          opt_syscons.h
702 SC_NORM_ATTR            opt_syscons.h
703 SC_NORM_REV_ATTR        opt_syscons.h
704 SC_PIXEL_MODE           opt_syscons.h
705 SC_RENDER_DEBUG         opt_syscons.h
706 SC_TWOBUTTON_MOUSE      opt_syscons.h
707
708 # options for printf
709 PRINTF_BUFR_SIZE        opt_printf.h
710
711 # kbd options
712 KBD_DISABLE_KEYMAP_LOAD opt_kbd.h
713 KBD_INSTALL_CDEV        opt_kbd.h
714 KBD_MAXRETRY            opt_kbd.h
715 KBD_MAXWAIT             opt_kbd.h
716 KBD_RESETDELAY          opt_kbd.h
717 KBDIO_DEBUG             opt_kbd.h
718
719 # options for the Atheros driver
720 ATH_DEBUG               opt_ath.h
721 ATH_TXBUF               opt_ath.h
722 ATH_RXBUF               opt_ath.h
723 ATH_DIAGAPI             opt_ath.h
724 ATH_TX99_DIAG           opt_ath.h
725
726 # dcons options 
727 DCONS_BUF_SIZE          opt_dcons.h
728 DCONS_POLL_HZ           opt_dcons.h
729 DCONS_FORCE_CONSOLE     opt_dcons.h
730 DCONS_FORCE_GDB         opt_dcons.h
731
732 # Static unit counts
733 NI4BTRC                 opt_i4b.h
734 NI4BRBCH                opt_i4b.h
735 NI4BTEL                 opt_i4b.h
736 #XXXBZ#NI4BIPR                  opt_i4b.h
737 #XXXBZ#NI4BING                  opt_i4b.h
738 #XXXBZ#NI4BISPPP                opt_i4b.h
739
740 # VFS options
741 LOOKUP_SHARED           opt_vfs.h
742
743 # HWPMC options
744 HWPMC_HOOKS
745
746 # XBOX options for FreeBSD/i386, but some files are MI
747 XBOX                    opt_xbox.h
748
749 # XFS
750 XFS
751
752 # Interrupt filtering
753 INTR_FILTER             opt_global.h