3 # On the handling of kernel options
5 # All kernel options should be listed in NOTES, with suitable
6 # descriptions. Negative options (options that make some code not
7 # compile) should be commented out; LINT (generated from NOTES) should
8 # compile as much code as possible. Try to structure option-using
9 # code so that a single option only switch code on, or only switch
10 # code off, to make it possible to have a full compile-test. If
11 # necessary, you can check for COMPILING_LINT to get maximum code
14 # All new options shall also be listed in either "conf/options" or
15 # "conf/options.<machine>". Options that affect a single source-file
16 # <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options
17 # that affect multiple files should either go in "opt_global.h" if
18 # this is a kernel-wide option (used just about everywhere), or in
19 # "opt_<option-name-in-lower-case>.h" if it affects only some files.
20 # Note that the effect of listing only an option without a
21 # header-file-name in conf/options (and cousins) is that the last
22 # convention is followed.
24 # This handling scheme is not yet fully implemented.
27 # Format of this file:
28 # Option name filename
30 # If filename is missing, the default is
31 # opt_<name-of-option-in-lower-case>.h
34 AACRAID_DEBUG opt_aacraid.h
35 AHC_ALLOW_MEMIO opt_aic7xxx.h
36 AHC_TMODE_ENABLE opt_aic7xxx.h
37 AHC_DUMP_EEPROM opt_aic7xxx.h
38 AHC_DEBUG opt_aic7xxx.h
39 AHC_DEBUG_OPTS opt_aic7xxx.h
40 AHC_REG_PRETTY_PRINT opt_aic7xxx.h
41 AHD_DEBUG opt_aic79xx.h
42 AHD_DEBUG_OPTS opt_aic79xx.h
43 AHD_TMODE_ENABLE opt_aic79xx.h
44 AHD_REG_PRETTY_PRINT opt_aic79xx.h
45 ADW_ALLOW_MEMIO opt_adw.h
50 ALT_BREAK_TO_DEBUGGER opt_kdb.h
51 BREAK_TO_DEBUGGER opt_kdb.h
52 BUF_TRACKING opt_global.h
54 DDB_BUFR_SIZE opt_ddb.h
55 DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h
56 DDB_CAPTURE_MAXBUFSIZE opt_ddb.h
59 FULL_BUF_TRACKING opt_global.h
63 KDB_UNATTENDED opt_kdb.h
65 SYSCTL_DEBUG opt_sysctl.h
66 EARLY_PRINTF opt_global.h
67 TEXTDUMP_PREFERRED opt_ddb.h
68 TEXTDUMP_VERBOSE opt_ddb.h
69 NUM_CORE_FILES opt_global.h
71 # Miscellaneous options.
74 ALTERA_SDCARD_FAST_SIM opt_altera_sdcard.h
75 ATSE_CFI_HACK opt_cfi.h
77 BOOTHOWTO opt_global.h
78 BOOTVERBOSE opt_global.h
80 CAPABILITIES opt_capsicum.h
81 CAPABILITY_MODE opt_capsicum.h
82 COMPAT_43 opt_compat.h
83 COMPAT_43TTY opt_compat.h
84 COMPAT_FREEBSD4 opt_compat.h
85 COMPAT_FREEBSD5 opt_compat.h
86 COMPAT_FREEBSD6 opt_compat.h
87 COMPAT_FREEBSD7 opt_compat.h
88 COMPAT_FREEBSD9 opt_compat.h
89 COMPAT_FREEBSD10 opt_compat.h
90 COMPAT_FREEBSD11 opt_compat.h
91 COMPAT_CLOUDABI32 opt_dontuse.h
92 COMPAT_CLOUDABI64 opt_dontuse.h
93 COMPAT_LINUXKPI opt_compat.h
94 COMPILING_LINT opt_global.h
96 DEADLKRES opt_watchdog.h
98 EXT_RESOURCES opt_global.h
100 FILEMON opt_dontuse.h
102 FULL_PREEMPTION opt_sched.h
104 IMAGACT_BINMISC opt_dontuse.h
105 IPI_PREEMPTION opt_sched.h
109 GEOM_CACHE opt_geom.h
110 GEOM_CONCAT opt_geom.h
114 GEOM_JOURNAL opt_geom.h
115 GEOM_LABEL opt_geom.h
116 GEOM_LABEL_GPT opt_geom.h
117 GEOM_LINUX_LVM opt_geom.h
120 GEOM_MIRROR opt_geom.h
121 GEOM_MOUNTVER opt_geom.h
122 GEOM_MULTIPATH opt_geom.h
124 GEOM_PART_APM opt_geom.h
125 GEOM_PART_BSD opt_geom.h
126 GEOM_PART_BSD64 opt_geom.h
127 GEOM_PART_EBR opt_geom.h
128 GEOM_PART_EBR_COMPAT opt_geom.h
129 GEOM_PART_GPT opt_geom.h
130 GEOM_PART_LDM opt_geom.h
131 GEOM_PART_MBR opt_geom.h
132 GEOM_PART_VTOC8 opt_geom.h
134 GEOM_RAID3 opt_geom.h
135 GEOM_SHSEC opt_geom.h
136 GEOM_STRIPE opt_geom.h
137 GEOM_SUNLABEL opt_geom.h
139 GEOM_UZIP_DEBUG opt_geom.h
140 GEOM_VINUM opt_geom.h
141 GEOM_VIRSTOR opt_geom.h
145 KDTRACE_HOOKS opt_global.h
146 KDTRACE_FRAME opt_kdtrace.h
147 KN_HASHSIZE opt_kqueue.h
152 KTRACE_REQUEST_POOL opt_ktrace.h
155 MAC_BIBA opt_dontuse.h
156 MAC_BSDEXTENDED opt_dontuse.h
157 MAC_IFOFF opt_dontuse.h
158 MAC_LOMAC opt_dontuse.h
159 MAC_MLS opt_dontuse.h
160 MAC_NONE opt_dontuse.h
161 MAC_PARTITION opt_dontuse.h
162 MAC_PORTACL opt_dontuse.h
163 MAC_SEEOTHERUIDS opt_dontuse.h
165 MAC_STUB opt_dontuse.h
166 MAC_TEST opt_dontuse.h
168 MD_ROOT_FSTYPE opt_md.h
169 MD_ROOT_SIZE opt_md.h
171 MFI_DECODE_LOG opt_mfi.h
172 MPROF_BUFFERS opt_mprof.h
173 MPROF_HASH_SIZE opt_mprof.h
174 NEW_PCIB opt_global.h
175 NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h
178 NO_EVENTTIMERS opt_timer.h
179 NO_SYSCTL_DESCR opt_global.h
180 NSWBUF_MIN opt_swap.h
181 MBUF_PACKET_ZONE_DISABLE opt_global.h
182 PANIC_REBOOT_WAIT_TIME opt_panic.h
186 PPC_PROBE_CHIPSET opt_ppc.h
188 PREEMPTION opt_sched.h
190 SCHED_4BSD opt_sched.h
191 SCHED_STATS opt_sched.h
192 SCHED_ULE opt_sched.h
194 SLHCI_DEBUG opt_slhci.h
211 SHMMAXPGS opt_sysvipc.h
215 SYSVMSG opt_sysvipc.h
216 SYSVSEM opt_sysvipc.h
217 SYSVSHM opt_sysvipc.h
218 SW_WATCHDOG opt_watchdog.h
221 UMTX_CHAINS opt_global.h
224 # POSIX kernel options
225 P1003_1B_MQUEUE opt_posix.h
226 P1003_1B_SEMAPHORES opt_posix.h
227 _KPOSIX_PRIORITY_SCHEDULING opt_posix.h
229 # Do we want the config file compiled into the kernel?
230 INCLUDE_CONFIG_FILE opt_config.h
232 # Options for static filesystems. These should only be used at config
233 # time, since the corresponding lkms cannot work if there are any static
234 # dependencies. Unusability is enforced by hiding the defines for the
235 # options in a never-included header.
239 FDESCFS opt_dontuse.h
242 MSDOSFS opt_dontuse.h
246 PSEUDOFS opt_dontuse.h
250 UNIONFS opt_dontuse.h
254 PSEUDOFS_TRACE opt_pseudofs.h
257 KGSSAPI opt_kgssapi.h
258 KGSSAPI_DEBUG opt_kgssapi.h
260 # These static filesystems have one slightly bogus static dependency in
261 # sys/i386/i386/autoconf.c. If any of these filesystems are
262 # statically compiled into the kernel, code for mounting them as root
263 # filesystems will be enabled - but look below.
269 # filesystems and libiconv bridge
270 CD9660_ICONV opt_dontuse.h
271 MSDOSFS_ICONV opt_dontuse.h
272 UDF_ICONV opt_dontuse.h
274 # If you are following the conditions in the copyright,
275 # you can enable soft-updates which will speed up a lot of thigs
276 # and make the system safer from crashes at the same time.
277 # otherwise a STUB module will be compiled in.
278 SOFTUPDATES opt_ffs.h
280 # On small, embedded systems, it can be useful to turn off support for
281 # snapshots. It saves about 30-40k for a feature that would be lightly
282 # used, if it is used at all.
283 NO_FFS_SNAPSHOT opt_ffs.h
285 # Enabling this option turns on support for Access Control Lists in UFS,
286 # which can be used to support high security configurations. Depends on
290 # Enabling this option turns on support for extended attributes in UFS-based
291 # filesystems, which can be used to support high security configurations
292 # as well as new filesystem features.
293 UFS_EXTATTR opt_ufs.h
294 UFS_EXTATTR_AUTOSTART opt_ufs.h
296 # Enable fast hash lookups for large directories on UFS-based filesystems.
297 UFS_DIRHASH opt_ufs.h
299 # Enable gjournal-based UFS journal.
300 UFS_GJOURNAL opt_ufs.h
302 # The below sentence is not in English, and neither is this one.
303 # We plan to remove the static dependences above, with a
304 # <filesystem>_ROOT option to control if it usable as root. This list
305 # allows these options to be present in config files already (though
306 # they won't make any difference yet).
307 NFS_ROOT opt_nfsroot.h
312 # Options used only in subr_param.c.
317 VM_BCACHE_SIZE_MAX opt_param.h
318 VM_SWZONE_SIZE_MAX opt_param.h
324 # Generic SCSI options.
325 CAM_MAX_HIGHPOWER opt_cam.h
327 CAM_DEBUG_COMPILE opt_cam.h
328 CAM_DEBUG_DELAY opt_cam.h
329 CAM_DEBUG_BUS opt_cam.h
330 CAM_DEBUG_TARGET opt_cam.h
331 CAM_DEBUG_LUN opt_cam.h
332 CAM_DEBUG_FLAGS opt_cam.h
333 CAM_BOOT_DELAY opt_cam.h
334 CAM_IOSCHED_DYNAMIC opt_cam.h
335 SCSI_DELAY opt_scsi.h
336 SCSI_NO_SENSE_STRINGS opt_scsi.h
337 SCSI_NO_OP_STRINGS opt_scsi.h
339 # Options used only in cam/ata/ata_da.c
340 ADA_TEST_FAILURE opt_ada.h
341 ATA_STATIC_ID opt_ada.h
343 # Options used only in cam/scsi/scsi_cd.c
344 CHANGER_MIN_BUSY_SECONDS opt_cd.h
345 CHANGER_MAX_BUSY_SECONDS opt_cd.h
347 # Options used only in cam/scsi/scsi_sa.c.
348 SA_IO_TIMEOUT opt_sa.h
349 SA_SPACE_TIMEOUT opt_sa.h
350 SA_REWIND_TIMEOUT opt_sa.h
351 SA_ERASE_TIMEOUT opt_sa.h
352 SA_1FM_AT_EOD opt_sa.h
354 # Options used only in cam/scsi/scsi_pt.c
355 SCSI_PT_DEFAULT_TIMEOUT opt_pt.h
357 # Options used only in cam/scsi/scsi_ses.c
358 SES_ENABLE_PASSTHROUGH opt_ses.h
360 # Options used in dev/sym/ (Symbios SCSI driver).
361 SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits)
362 # Allows the ncr to take precedence
363 # 1 (1<<0) -> 810a, 860
364 # 2 (1<<1) -> 825a, 875, 885, 895
365 # 4 (1<<2) -> 895a, 896, 1510d
366 SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885
367 # disabled:0 (default), enabled:1
368 SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking
369 # disabled:0, enabled:1 (default)
370 SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported
371 # default:8, range:[1..64]
373 # Options used only in dev/ncr/*
374 SCSI_NCR_DEBUG opt_ncr.h
375 SCSI_NCR_MAX_SYNC opt_ncr.h
376 SCSI_NCR_MAX_WIDE opt_ncr.h
377 SCSI_NCR_MYADDR opt_ncr.h
379 # Options used only in dev/isp/*
380 ISP_TARGET_MODE opt_isp.h
381 ISP_FW_CRASH_DUMP opt_isp.h
382 ISP_DEFAULT_ROLES opt_isp.h
383 ISP_INTERNAL_TARGET opt_isp.h
384 ISP_FCTAPE_OFF opt_isp.h
386 # Options used only in dev/iscsi
387 ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h
396 ALTQ_CODEL opt_altq.h
397 ALTQ_DEBUG opt_altq.h
399 ALTQ_FAIRQ opt_altq.h
400 ALTQ_NOPCC opt_altq.h
405 BOOTP_BLOCKSIZE opt_bootp.h
406 BOOTP_COMPAT opt_bootp.h
407 BOOTP_NFSROOT opt_bootp.h
408 BOOTP_NFSV3 opt_bootp.h
409 BOOTP_WIRED_TO opt_bootp.h
412 RATELIMIT opt_ratelimit.h
416 IPFILTER opt_ipfilter.h
417 IPFILTER_DEFAULT_BLOCK opt_ipfilter.h
418 IPFILTER_LOG opt_ipfilter.h
419 IPFILTER_LOOKUP opt_ipfilter.h
420 IPFIREWALL opt_ipfw.h
421 IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h
422 IPFIREWALL_NAT opt_ipfw.h
423 IPFIREWALL_NAT64 opt_ipfw.h
424 IPFIREWALL_NAT64_DIRECT_OUTPUT opt_ipfw.h
425 IPFIREWALL_NPTV6 opt_ipfw.h
426 IPFIREWALL_VERBOSE opt_ipfw.h
427 IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h
428 IPFIREWALL_PMOD opt_ipfw.h
430 IPSEC_DEBUG opt_ipsec.h
431 IPSEC_SUPPORT opt_ipsec.h
439 MROUTING opt_mrouting.h
441 PCBGROUP opt_pcbgroup.h
442 PF_DEFAULT_TO_DROP opt_pf.h
443 RADIX_MPATH opt_mpath.h
444 ROUTETABLES opt_route.h
446 SLIP_IFF_OPTS opt_slip.h
451 TCP_OFFLOAD opt_inet.h # Enable code to dispatch TCP offloading
452 TCP_RFC7413 opt_inet.h
453 TCP_RFC7413_MAX_KEYS opt_inet.h
454 TCP_SIGNATURE opt_ipsec.h
455 VLAN_ARRAY opt_vlan.h
462 SCTP_DEBUG opt_sctp.h # Enable debug printfs
463 SCTP_WITH_NO_CSUM opt_sctp.h # Use this at your peril
464 SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity
465 SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free
466 SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity
467 SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets
468 SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed
469 SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns.
470 SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats.
471 SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs
472 SCTP_LOCAL_TRACE_BUF opt_sctp.h # Use tracebuffer exported via sysctl
473 SCTP_DETAILED_STR_STATS opt_sctp.h # Use per PR-SCTP policy stream stats
478 # Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
479 # Each netgraph node type can be either be compiled into the kernel
480 # or loaded dynamically. To get the former, include the corresponding
481 # option below. Each type has its own man page, e.g. ng_async(4).
483 NETGRAPH_DEBUG opt_netgraph.h
484 NETGRAPH_ASYNC opt_netgraph.h
485 NETGRAPH_ATMLLC opt_netgraph.h
486 NETGRAPH_ATM_ATMPIF opt_netgraph.h
487 NETGRAPH_BLUETOOTH opt_netgraph.h
488 NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h
489 NETGRAPH_BLUETOOTH_H4 opt_netgraph.h
490 NETGRAPH_BLUETOOTH_HCI opt_netgraph.h
491 NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h
492 NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h
493 NETGRAPH_BLUETOOTH_UBT opt_netgraph.h
494 NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h
495 NETGRAPH_BPF opt_netgraph.h
496 NETGRAPH_BRIDGE opt_netgraph.h
497 NETGRAPH_CAR opt_netgraph.h
498 NETGRAPH_CISCO opt_netgraph.h
499 NETGRAPH_DEFLATE opt_netgraph.h
500 NETGRAPH_DEVICE opt_netgraph.h
501 NETGRAPH_ECHO opt_netgraph.h
502 NETGRAPH_EIFACE opt_netgraph.h
503 NETGRAPH_ETHER opt_netgraph.h
504 NETGRAPH_ETHER_ECHO opt_netgraph.h
505 NETGRAPH_FEC opt_netgraph.h
506 NETGRAPH_FRAME_RELAY opt_netgraph.h
507 NETGRAPH_GIF opt_netgraph.h
508 NETGRAPH_GIF_DEMUX opt_netgraph.h
509 NETGRAPH_HOLE opt_netgraph.h
510 NETGRAPH_IFACE opt_netgraph.h
511 NETGRAPH_IP_INPUT opt_netgraph.h
512 NETGRAPH_IPFW opt_netgraph.h
513 NETGRAPH_KSOCKET opt_netgraph.h
514 NETGRAPH_L2TP opt_netgraph.h
515 NETGRAPH_LMI opt_netgraph.h
516 NETGRAPH_MPPC_COMPRESSION opt_netgraph.h
517 NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h
518 NETGRAPH_NAT opt_netgraph.h
519 NETGRAPH_NETFLOW opt_netgraph.h
520 NETGRAPH_ONE2MANY opt_netgraph.h
521 NETGRAPH_PATCH opt_netgraph.h
522 NETGRAPH_PIPE opt_netgraph.h
523 NETGRAPH_PPP opt_netgraph.h
524 NETGRAPH_PPPOE opt_netgraph.h
525 NETGRAPH_PPTPGRE opt_netgraph.h
526 NETGRAPH_PRED1 opt_netgraph.h
527 NETGRAPH_RFC1490 opt_netgraph.h
528 NETGRAPH_SOCKET opt_netgraph.h
529 NETGRAPH_SPLIT opt_netgraph.h
530 NETGRAPH_SPPP opt_netgraph.h
531 NETGRAPH_TAG opt_netgraph.h
532 NETGRAPH_TCPMSS opt_netgraph.h
533 NETGRAPH_TEE opt_netgraph.h
534 NETGRAPH_TTY opt_netgraph.h
535 NETGRAPH_UI opt_netgraph.h
536 NETGRAPH_VJC opt_netgraph.h
537 NETGRAPH_VLAN opt_netgraph.h
540 NGATM_ATM opt_netgraph.h
541 NGATM_ATMBASE opt_netgraph.h
542 NGATM_SSCOP opt_netgraph.h
543 NGATM_SSCFU opt_netgraph.h
544 NGATM_UNI opt_netgraph.h
545 NGATM_CCATM opt_netgraph.h
550 TI_SF_BUF_JUMBO opt_ti.h
551 TI_JUMBO_HDRSPLIT opt_ti.h
553 # DPT driver debug flags
554 DPT_MEASURE_PERFORMANCE opt_dpt.h
555 DPT_RESET_HBA opt_dpt.h
557 # Misc debug flags. Most of these should probably be replaced with
558 # 'DEBUG', and then let people recompile just the interesting modules
559 # with 'make CC="cc -DDEBUG"'.
560 CLUSTERDEBUG opt_debug_cluster.h
561 DEBUG_1284 opt_ppb_1284.h
564 PLIP_DEBUG opt_plip.h
565 LOCKF_DEBUG opt_debug_lockf.h
566 SI_DEBUG opt_debug_si.h
567 IFMEDIA_DEBUG opt_ifmedia.h
571 FB_INSTALL_CDEV opt_fb.h
573 # ppbus related options
574 PERIPH_1284 opt_ppb_1284.h
575 DONTPROBE_1284 opt_ppb_1284.h
577 # smbus related options
578 ENABLE_ALART opt_intpm.h
580 # These cause changes all over the kernel
581 BLKDEV_IOSIZE opt_global.h
582 BURN_BRIDGES opt_global.h
584 DEBUG_LOCKS opt_global.h
585 DEBUG_VFS_LOCKS opt_global.h
586 DFLTPHYS opt_global.h
587 DIAGNOSTIC opt_global.h
588 INVARIANT_SUPPORT opt_global.h
589 INVARIANTS opt_global.h
591 MAXMEMDOM opt_global.h
593 MCLSHIFT opt_global.h
594 MUTEX_NOINLINE opt_global.h
595 LOCK_PROFILING opt_global.h
596 LOCK_PROFILING_FAST opt_global.h
598 REGRESSION opt_global.h
599 RWLOCK_NOINLINE opt_global.h
600 SX_NOINLINE opt_global.h
601 VFS_BIO_DEBUG opt_global.h
603 # These are VM related options
604 VM_KMEM_SIZE opt_vm.h
605 VM_KMEM_SIZE_SCALE opt_vm.h
606 VM_KMEM_SIZE_MAX opt_vm.h
607 VM_NRESERVLEVEL opt_vm.h
608 VM_NUMA_ALLOC opt_vm.h
609 VM_LEVEL_0_ORDER opt_vm.h
611 MALLOC_MAKE_FAILURES opt_vm.h
612 MALLOC_PROFILE opt_vm.h
613 MALLOC_DEBUG_MAXZONES opt_vm.h
615 # The MemGuard replacement allocator used for tamper-after-free detection
616 DEBUG_MEMGUARD opt_vm.h
618 # The RedZone malloc(9) protection
619 DEBUG_REDZONE opt_vm.h
621 # Standard SMP options
622 EARLY_AP_STARTUP opt_global.h
625 # Size of the kernel message buffer
626 MSGBUF_SIZE opt_msgbuf.h
629 NFS_MINATTRTIMO opt_nfs.h
630 NFS_MAXATTRTIMO opt_nfs.h
631 NFS_MINDIRATTRTIMO opt_nfs.h
632 NFS_MAXDIRATTRTIMO opt_nfs.h
635 # For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
636 OVERRIDE_CARD opt_bktr.h
637 OVERRIDE_TUNER opt_bktr.h
638 OVERRIDE_DBX opt_bktr.h
639 OVERRIDE_MSP opt_bktr.h
640 BROOKTREE_SYSTEM_DEFAULT opt_bktr.h
641 BROOKTREE_ALLOC_PAGES opt_bktr.h
642 BKTR_OVERRIDE_CARD opt_bktr.h
643 BKTR_OVERRIDE_TUNER opt_bktr.h
644 BKTR_OVERRIDE_DBX opt_bktr.h
645 BKTR_OVERRIDE_MSP opt_bktr.h
646 BKTR_SYSTEM_DEFAULT opt_bktr.h
647 BKTR_ALLOC_PAGES opt_bktr.h
648 BKTR_USE_PLL opt_bktr.h
649 BKTR_GPIO_ACCESS opt_bktr.h
650 BKTR_NO_MSP_RESET opt_bktr.h
651 BKTR_430_FX_MODE opt_bktr.h
652 BKTR_SIS_VIA_MODE opt_bktr.h
653 BKTR_USE_FREEBSD_SMBUS opt_bktr.h
654 BKTR_NEW_MSP34XX_DRIVER opt_bktr.h
656 # Options for uart(4)
657 UART_PPS_ON_CTS opt_uart.h
658 UART_POLL_FREQ opt_uart.h
659 UART_DEV_TOLERANCE_PCT opt_uart.h
661 # options for bus/device framework
664 # options for USB support
666 USB_HOST_ALIGN opt_usb.h
667 USB_REQ_DEBUG opt_usb.h
668 USB_TEMPLATE opt_usb.h
669 USB_VERBOSE opt_usb.h
670 USB_DMA_SINGLE_ALLOC opt_usb.h
671 USB_EHCI_BIG_ENDIAN_DESC opt_usb.h
673 UKBD_DFLT_KEYMAP opt_ukbd.h
674 UPLCOM_INTR_INTERVAL opt_uplcom.h
675 UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h
676 UVSCOM_INTR_INTERVAL opt_uvscom.h
678 # options for the Realtek rtwn driver
679 RTWN_DEBUG opt_rtwn.h
680 RTWN_WITHOUT_UCODE opt_rtwn.h
682 # Embedded system options
688 PCFCLOCK_VERBOSE opt_pcfclock.h
689 PCFCLOCK_MAX_RETRIES opt_pcfclock.h
694 KTR_CPUMASK opt_ktr.h
695 KTR_COMPILE opt_global.h
696 KTR_BOOT_ENTRIES opt_global.h
697 KTR_ENTRIES opt_global.h
698 KTR_VERBOSE opt_ktr.h
700 WITNESS_KDB opt_witness.h
701 WITNESS_NO_VNODE opt_witness.h
702 WITNESS_SKIPSPIN opt_witness.h
703 WITNESS_COUNT opt_witness.h
704 OPENSOLARIS_WITNESS opt_global.h
706 # options for ACPI support
707 ACPI_DEBUG opt_acpi.h
708 ACPI_MAX_TASKS opt_acpi.h
709 ACPI_MAX_THREADS opt_acpi.h
717 # various 'device presence' options.
720 DEV_NETMAP opt_global.h
725 DEV_RANDOM opt_global.h
726 DEV_SPLASH opt_splash.h
736 BCE_NVRAM_WRITE_SUPPORT opt_bce.h
738 SOCKBUF_DEBUG opt_global.h
741 # options for ubsec driver
742 UBSEC_DEBUG opt_ubsec.h
743 UBSEC_RNDTEST opt_ubsec.h
744 UBSEC_NO_RNG opt_ubsec.h
746 # options for hifn driver
747 HIFN_DEBUG opt_hifn.h
748 HIFN_RNDTEST opt_hifn.h
750 # options for safenet driver
751 SAFE_DEBUG opt_safe.h
752 SAFE_NO_RNG opt_safe.h
753 SAFE_RNDTEST opt_safe.h
756 MAXCONS opt_syscons.h
757 SC_ALT_MOUSE_IMAGE opt_syscons.h
758 SC_CUT_SPACES2TABS opt_syscons.h
759 SC_CUT_SEPCHARS opt_syscons.h
760 SC_DEBUG_LEVEL opt_syscons.h
761 SC_DFLT_FONT opt_syscons.h
762 SC_DISABLE_KDBKEY opt_syscons.h
763 SC_DISABLE_REBOOT opt_syscons.h
764 SC_HISTORY_SIZE opt_syscons.h
765 SC_KERNEL_CONS_ATTR opt_syscons.h
766 SC_KERNEL_CONS_REV_ATTR opt_syscons.h
767 SC_MOUSE_CHAR opt_syscons.h
768 SC_NO_CUTPASTE opt_syscons.h
769 SC_NO_FONT_LOADING opt_syscons.h
770 SC_NO_HISTORY opt_syscons.h
771 SC_NO_MODE_CHANGE opt_syscons.h
772 SC_NO_SUSPEND_VTYSWITCH opt_syscons.h
773 SC_NO_SYSMOUSE opt_syscons.h
774 SC_NORM_ATTR opt_syscons.h
775 SC_NORM_REV_ATTR opt_syscons.h
776 SC_PIXEL_MODE opt_syscons.h
777 SC_RENDER_DEBUG opt_syscons.h
778 SC_TWOBUTTON_MOUSE opt_syscons.h
779 VT_ALT_TO_ESC_HACK opt_syscons.h
780 VT_FB_DEFAULT_WIDTH opt_syscons.h
781 VT_FB_DEFAULT_HEIGHT opt_syscons.h
782 VT_MAXWINDOWS opt_syscons.h
783 VT_TWOBUTTON_MOUSE opt_syscons.h
787 # teken terminal emulator options
788 TEKEN_CONS25 opt_teken.h
789 TEKEN_UTF8 opt_teken.h
790 TERMINAL_KERN_ATTR opt_teken.h
791 TERMINAL_NORM_ATTR opt_teken.h
794 PRINTF_BUFR_SIZE opt_printf.h
797 KBD_DISABLE_KEYMAP_LOAD opt_kbd.h
798 KBD_INSTALL_CDEV opt_kbd.h
799 KBD_MAXRETRY opt_kbd.h
800 KBD_MAXWAIT opt_kbd.h
801 KBD_RESETDELAY opt_kbd.h
802 KBDIO_DEBUG opt_kbd.h
804 KBDMUX_DFLT_KEYMAP opt_kbdmux.h
806 # options for the Atheros driver
810 ATH_DIAGAPI opt_ath.h
811 ATH_TX99_DIAG opt_ath.h
812 ATH_ENABLE_11N opt_ath.h
813 ATH_ENABLE_DFS opt_ath.h
814 ATH_EEPROM_FIRMWARE opt_ath.h
815 ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h
816 ATH_DEBUG_ALQ opt_ath.h
817 ATH_KTR_INTR_DEBUG opt_ath.h
819 # options for the Atheros hal
820 AH_SUPPORT_AR5416 opt_ah.h
821 # XXX For now, this breaks non-AR9130 chipsets, so only use it
822 # XXX when actually targeting AR9130.
823 AH_SUPPORT_AR9130 opt_ah.h
825 # This is required for AR933x SoC support
826 AH_SUPPORT_AR9330 opt_ah.h
827 AH_SUPPORT_AR9340 opt_ah.h
828 AH_SUPPORT_QCA9530 opt_ah.h
829 AH_SUPPORT_QCA9550 opt_ah.h
833 AH_DEBUG_ALQ opt_ah.h
834 AH_REGOPS_FUNC opt_ah.h
835 AH_WRITE_REGDOMAIN opt_ah.h
836 AH_DEBUG_COUNTRY opt_ah.h
837 AH_WRITE_EEPROM opt_ah.h
838 AH_PRIVATE_DIAG opt_ah.h
839 AH_NEED_DESC_SWAP opt_ah.h
840 AH_USE_INIPDGAIN opt_ah.h
842 AH_RXCFG_SDMAMW_4BYTES opt_ah.h
843 AH_INTERRUPT_DEBUGGING opt_ah.h
844 # AR5416 and later interrupt mitigation
845 # XXX do not use this for AR9130
846 AH_AR5416_INTERRUPT_MITIGATION opt_ah.h
848 # options for the Broadcom BCM43xx driver (bwi)
850 BWI_DEBUG_VERBOSE opt_bwi.h
852 # options for the Brodacom BCM43xx driver (bwn)
854 BWN_GPL_PHY opt_bwn.h
856 # Options for the SIBA driver
857 SIBA_DEBUG opt_siba.h
859 # options for the Marvell 8335 wireless driver
860 MALO_DEBUG opt_malo.h
861 MALO_TXBUF opt_malo.h
862 MALO_RXBUF opt_malo.h
864 # options for the Marvell wireless driver
868 MWL_DIAGAPI opt_mwl.h
869 MWL_AGGR_SIZE opt_mwl.h
870 MWL_TX_NODROP opt_mwl.h
872 # Options for the Marvell NETA driver
873 MVNETA_MULTIQUEUE opt_mvneta.h
874 MVNETA_KTR opt_mvneta.h
876 # Options for the Intel 802.11ac wireless driver
879 # Options for the Intel 802.11n wireless driver
882 # Options for the Intel 3945ABG wireless driver
886 DCONS_BUF_SIZE opt_dcons.h
887 DCONS_POLL_HZ opt_dcons.h
888 DCONS_FORCE_CONSOLE opt_dcons.h
889 DCONS_FORCE_GDB opt_dcons.h
892 HWPMC_DEBUG opt_global.h
894 HWPMC_MIPS_BACKTRACE opt_hwpmc_hooks.h
896 # XBOX options for FreeBSD/i386, but some files are MI
899 # Interrupt filtering
902 # 802.11 support layer
903 IEEE80211_DEBUG opt_wlan.h
904 IEEE80211_DEBUG_REFCNT opt_wlan.h
905 IEEE80211_AMPDU_AGE opt_wlan.h
906 IEEE80211_SUPPORT_MESH opt_wlan.h
907 IEEE80211_SUPPORT_SUPERG opt_wlan.h
908 IEEE80211_SUPPORT_TDMA opt_wlan.h
909 IEEE80211_ALQ opt_wlan.h
910 IEEE80211_DFS_DEBUG opt_wlan.h
912 # 802.11 TDMA support
913 TDMA_SLOTLEN_DEFAULT opt_tdma.h
914 TDMA_SLOTCNT_DEFAULT opt_tdma.h
915 TDMA_BINTVAL_DEFAULT opt_tdma.h
916 TDMA_TXRATE_11B_DEFAULT opt_tdma.h
917 TDMA_TXRATE_11G_DEFAULT opt_tdma.h
918 TDMA_TXRATE_11A_DEFAULT opt_tdma.h
919 TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h
920 TDMA_TXRATE_HALF_DEFAULT opt_tdma.h
921 TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h
922 TDMA_TXRATE_11NA_DEFAULT opt_tdma.h
923 TDMA_TXRATE_11NG_DEFAULT opt_tdma.h
926 PICKMODE_DEBUG opt_videomode.h
928 # Network stack virtualization options
930 VNET_DEBUG opt_global.h
932 # Common Flash Interface (CFI) options
933 CFI_SUPPORT_STRATAFLASH opt_cfi.h
934 CFI_ARMEDANDDANGEROUS opt_cfi.h
935 CFI_HARDWAREBYTESWAP opt_cfi.h
939 SND_DIAGNOSTIC opt_snd.h
940 SND_FEEDER_MULTIFORMAT opt_snd.h
941 SND_FEEDER_FULL_MULTIFORMAT opt_snd.h
942 SND_FEEDER_RATE_HP opt_snd.h
944 SND_OLDSTEREO opt_snd.h
948 # Flattened device tree options
950 FDT_DTB_STATIC opt_platform.h
952 # OFED Infiniband stack
954 OFED_DEBUG_INIT opt_ofed.h
958 IPOIB_DEBUG opt_ofed.h
961 # Resource Accounting
963 RACCT_DEFAULT_TO_DISABLED opt_global.h
968 # Random number generator(s)
969 # Which CSPRNG hash we get.
970 # If Yarrow is not chosen, Fortuna is selected.
971 RANDOM_YARROW opt_global.h
972 # With this, no entropy processor is loaded, but the entropy
973 # harvesting infrastructure is present. This means an entropy
974 # processor may be loaded as a module.
975 RANDOM_LOADABLE opt_global.h
976 # This turns on high-rate and potentially expensive harvesting in
977 # the uma slab allocator.
978 RANDOM_ENABLE_UMA opt_global.h
981 BHND_LOGLEVEL opt_global.h
983 # GPIO and child devices
984 GPIO_SPI_DEBUG opt_gpio.h
986 # etherswitch(4) driver
987 RTL8366_SOFT_RESET opt_etherswitch.h
989 # evdev protocol support
990 EVDEV_SUPPORT opt_evdev.h
991 EVDEV_DEBUG opt_evdev.h
992 UINPUT_DEBUG opt_evdev.h
994 # Hyper-V network driver
997 # CAM-based MMC stack
999 # Encrypted kernel crash dumps