ident(1): Normalizing date format

[FreeBSD/FreeBSD.git] / sys / contrib / alpine-hal / al_hal_serdes_internal_regs.h

/*-
*******************************************************************************
Copyright (C) 2015 Annapurna Labs Ltd.

This file may be licensed under the terms of the Annapurna Labs Commercial
License Agreement.

Alternatively, this file can be distributed under the terms of the GNU General
Public License V2 as published by the Free Software Foundation and can be
found at http://www.gnu.org/licenses/gpl-2.0.html

Alternatively, redistribution and use in source and binary forms, with or
without modification, are permitted provided that the following conditions are
met:

    *     Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.

    *     Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

*******************************************************************************/
#ifndef __AL_SERDES_INTERNAL_REGS_H__
#define  __AL_SERDES_INTERNAL_REGS_H__

#ifdef __cplusplus
extern "C" {
#endif

/*******************************************************************************
 * Per lane register fields
 ******************************************************************************/
/*
 * RX and TX lane hard reset
 * 0 - Hard reset is asserted
 * 1 - Hard reset is de-asserted
 */
#define SERDES_IREG_FLD_CMNCTLPOR_HARDRSTBYPASS_REG_NUM                 2
#define SERDES_IREG_FLD_CMNCTLPOR_HARDRSTBYPASS_MASK                    0x01
#define SERDES_IREG_FLD_CMNCTLPOR_HARDRSTBYPASS_VAL_ASSERT              0x00
#define SERDES_IREG_FLD_CMNCTLPOR_HARDRSTBYPASS_VAL_DEASSERT            0x01

/*
 * RX and TX lane hard reset control
 * 0 - Hard reset is taken from the interface pins
 * 1 - Hard reset is taken from registers
 */
#define SERDES_IREG_FLD_CMNCTLPOR_HARDRSTBYPASSEN_REG_NUM               2
#define SERDES_IREG_FLD_CMNCTLPOR_HARDRSTBYPASSEN_MASK                  0x02
#define SERDES_IREG_FLD_CMNCTLPOR_HARDRSTBYPASSEN_VAL_IFACE             0x00
#define SERDES_IREG_FLD_CMNCTLPOR_HARDRSTBYPASSEN_VAL_REGS              0x02

/* RX lane power state control */
#define SERDES_IREG_FLD_LANEPCSPSTATE_RX_REG_NUM                        3
#define SERDES_IREG_FLD_LANEPCSPSTATE_RX_MASK                           0x1f
#define SERDES_IREG_FLD_LANEPCSPSTATE_RX_VAL_PD                         0x01
#define SERDES_IREG_FLD_LANEPCSPSTATE_RX_VAL_P2                         0x02
#define SERDES_IREG_FLD_LANEPCSPSTATE_RX_VAL_P1                         0x04
#define SERDES_IREG_FLD_LANEPCSPSTATE_RX_VAL_P0S                        0x08
#define SERDES_IREG_FLD_LANEPCSPSTATE_RX_VAL_P0                         0x10

/* TX lane power state control */
#define SERDES_IREG_FLD_LANEPCSPSTATE_TX_REG_NUM                        4
#define SERDES_IREG_FLD_LANEPCSPSTATE_TX_MASK                           0x1f
#define SERDES_IREG_FLD_LANEPCSPSTATE_TX_VAL_PD                         0x01
#define SERDES_IREG_FLD_LANEPCSPSTATE_TX_VAL_P2                         0x02
#define SERDES_IREG_FLD_LANEPCSPSTATE_TX_VAL_P1                         0x04
#define SERDES_IREG_FLD_LANEPCSPSTATE_TX_VAL_P0S                        0x08
#define SERDES_IREG_FLD_LANEPCSPSTATE_TX_VAL_P0                         0x10

/* RX lane word width */
#define SERDES_IREG_FLD_PCSRX_DATAWIDTH_REG_NUM                         5
#define SERDES_IREG_FLD_PCSRX_DATAWIDTH_MASK                            0x07
#define SERDES_IREG_FLD_PCSRX_DATAWIDTH_VAL_8                           0x00
#define SERDES_IREG_FLD_PCSRX_DATAWIDTH_VAL_10                          0x01
#define SERDES_IREG_FLD_PCSRX_DATAWIDTH_VAL_16                          0x02
#define SERDES_IREG_FLD_PCSRX_DATAWIDTH_VAL_20                          0x03
#define SERDES_IREG_FLD_PCSRX_DATAWIDTH_VAL_32                          0x04
#define SERDES_IREG_FLD_PCSRX_DATAWIDTH_VAL_40                          0x05

/* TX lane word width */
#define SERDES_IREG_FLD_PCSTX_DATAWIDTH_REG_NUM                         5
#define SERDES_IREG_FLD_PCSTX_DATAWIDTH_MASK                            0x70
#define SERDES_IREG_FLD_PCSTX_DATAWIDTH_VAL_8                           0x00
#define SERDES_IREG_FLD_PCSTX_DATAWIDTH_VAL_10                          0x10
#define SERDES_IREG_FLD_PCSTX_DATAWIDTH_VAL_16                          0x20
#define SERDES_IREG_FLD_PCSTX_DATAWIDTH_VAL_20                          0x30
#define SERDES_IREG_FLD_PCSTX_DATAWIDTH_VAL_32                          0x40
#define SERDES_IREG_FLD_PCSTX_DATAWIDTH_VAL_40                          0x50

/* RX lane rate select */
#define SERDES_IREG_FLD_PCSRX_DIVRATE_REG_NUM                           6
#define SERDES_IREG_FLD_PCSRX_DIVRATE_MASK                              0x07
#define SERDES_IREG_FLD_PCSRX_DIVRATE_VAL_1_8                           0x00
#define SERDES_IREG_FLD_PCSRX_DIVRATE_VAL_1_4                           0x01
#define SERDES_IREG_FLD_PCSRX_DIVRATE_VAL_1_2                           0x02
#define SERDES_IREG_FLD_PCSRX_DIVRATE_VAL_1_1                           0x03

/* TX lane rate select */
#define SERDES_IREG_FLD_PCSTX_DIVRATE_REG_NUM                           6
#define SERDES_IREG_FLD_PCSTX_DIVRATE_MASK                              0x70
#define SERDES_IREG_FLD_PCSTX_DIVRATE_VAL_1_8                           0x00
#define SERDES_IREG_FLD_PCSTX_DIVRATE_VAL_1_4                           0x10
#define SERDES_IREG_FLD_PCSTX_DIVRATE_VAL_1_2                           0x20
#define SERDES_IREG_FLD_PCSTX_DIVRATE_VAL_1_1                           0x30

/*
 * PMA serial RX-to-TX loop-back enable (from AGC to IO Driver). Serial receive
 * to transmit loopback: 0 - Disables loopback 1 - Transmits the untimed,
 * partial equalized RX signal out the transmit IO pins
 */
#define SERDES_IREG_FLD_LB_RX2TXUNTIMEDEN_REG_NUM                       7
#define SERDES_IREG_FLD_LB_RX2TXUNTIMEDEN                               0x10

/*
 * PMA TX-to-RX buffered serial loop-back enable (bypasses IO Driver). Serial
 * transmit to receive buffered loopback: 0 - Disables loopback 1 - Loops back
 * the TX serializer output into the CDR
 */
#define SERDES_IREG_FLD_LB_TX2RXBUFTIMEDEN_REG_NUM                      7
#define SERDES_IREG_FLD_LB_TX2RXBUFTIMEDEN                              0x20

/*
 * PMA TX-to-RX I/O serial loop-back enable (loop back done directly from TX to
 * RX pads). Serial IO loopback from the transmit lane IO pins to the receive
 * lane IO pins: 0 - Disables loopback 1 - Loops back the driver IO signal to
 * the RX IO pins
 */
#define SERDES_IREG_FLD_LB_TX2RXIOTIMEDEN_REG_NUM                       7
#define SERDES_IREG_FLD_LB_TX2RXIOTIMEDEN                               0x40

/*
 * PMA Parallel RX-to-TX loop-back enable. Parallel loopback from the PMA
 * receive lane 20-bit data ports, to the transmit lane 20-bit data ports 0 -
 * Disables loopback 1 - Loops back the 20-bit receive data port to the
 * transmitter
 */
#define SERDES_IREG_FLD_LB_PARRX2TXTIMEDEN_REG_NUM                      7
#define SERDES_IREG_FLD_LB_PARRX2TXTIMEDEN                              0x80

/*
 * PMA CDR recovered-clock loopback enable; asserted when PARRX2TXTIMEDEN is 1.
 * Transmit bit clock select: 0 - Selects synthesizer bit clock for transmit 1
 * - Selects CDR clock for transmit
 */
#define SERDES_IREG_FLD_LB_CDRCLK2TXEN_REG_NUM                          7
#define SERDES_IREG_FLD_LB_CDRCLK2TXEN                                  0x01

/* Receive lane BIST enable. Active High */
#define SERDES_IREG_FLD_PCSRXBIST_EN_REG_NUM                            8
#define SERDES_IREG_FLD_PCSRXBIST_EN                                    0x01

/* TX lane BIST enable. Active High */
#define SERDES_IREG_FLD_PCSTXBIST_EN_REG_NUM                            8
#define SERDES_IREG_FLD_PCSTXBIST_EN                                    0x02

/*
 * RX BIST completion signal 0 - Indicates test is not completed 1 - Indicates
 * the test has completed, and will remain high until a new test is initiated
 */
#define SERDES_IREG_FLD_RXBIST_DONE_REG_NUM                             8
#define SERDES_IREG_FLD_RXBIST_DONE                                     0x04

/*
 * RX BIST error count overflow indicator. Indicates an overflow in the number
 * of byte errors identified during the course of the test. This word is stable
 * to sample when *_DONE_* signal has asserted
 */
#define SERDES_IREG_FLD_RXBIST_ERRCOUNT_OVERFLOW_REG_NUM                8
#define SERDES_IREG_FLD_RXBIST_ERRCOUNT_OVERFLOW                        0x08

/*
 * RX BIST locked indicator 0 - Indicates BIST is not word locked and error
 * comparisons have not begun yet 1 - Indicates BIST is word locked and error
 * comparisons have begun
 */
#define SERDES_IREG_FLD_RXBIST_RXLOCKED_REG_NUM                         8
#define SERDES_IREG_FLD_RXBIST_RXLOCKED                                 0x10

/*
 * RX BIST error count word. Indicates the number of byte errors identified
 * during the course of the test. This word is stable to sample when *_DONE_*
 * signal has asserted
 */
#define SERDES_IREG_FLD_RXBIST_ERRCOUNT_MSB_REG_NUM                     9
#define SERDES_IREG_FLD_RXBIST_ERRCOUNT_LSB_REG_NUM                     10

/* Tx params */
#define SERDES_IREG_TX_DRV_1_REG_NUM                                    21
#define SERDES_IREG_TX_DRV_1_HLEV_MASK                                  0x7
#define SERDES_IREG_TX_DRV_1_HLEV_SHIFT                                 0
#define SERDES_IREG_TX_DRV_1_LEVN_MASK                                  0xf8
#define SERDES_IREG_TX_DRV_1_LEVN_SHIFT                                 3

#define SERDES_IREG_TX_DRV_2_REG_NUM                                    22
#define SERDES_IREG_TX_DRV_2_LEVNM1_MASK                                0xf
#define SERDES_IREG_TX_DRV_2_LEVNM1_SHIFT                               0
#define SERDES_IREG_TX_DRV_2_LEVNM2_MASK                                0x30
#define SERDES_IREG_TX_DRV_2_LEVNM2_SHIFT                               4

#define SERDES_IREG_TX_DRV_3_REG_NUM                                    23
#define SERDES_IREG_TX_DRV_3_LEVNP1_MASK                                0x7
#define SERDES_IREG_TX_DRV_3_LEVNP1_SHIFT                               0
#define SERDES_IREG_TX_DRV_3_SLEW_MASK                                  0x18
#define SERDES_IREG_TX_DRV_3_SLEW_SHIFT                                 3

/* Rx params */
#define SERDES_IREG_RX_CALEQ_1_REG_NUM                                  24
#define SERDES_IREG_RX_CALEQ_1_DCGAIN_MASK                              0x7
#define SERDES_IREG_RX_CALEQ_1_DCGAIN_SHIFT                             0
/* DFE post-shaping tap 3dB frequency */
#define SERDES_IREG_RX_CALEQ_1_DFEPSTAP3DB_MASK                         0x38
#define SERDES_IREG_RX_CALEQ_1_DFEPSTAP3DB_SHIFT                        3

#define SERDES_IREG_RX_CALEQ_2_REG_NUM                                  25
/* DFE post-shaping tap gain */
#define SERDES_IREG_RX_CALEQ_2_DFEPSTAPGAIN_MASK                        0x7
#define SERDES_IREG_RX_CALEQ_2_DFEPSTAPGAIN_SHIFT                       0
/* DFE first tap gain control */
#define SERDES_IREG_RX_CALEQ_2_DFETAP1GAIN_MASK                         0x78
#define SERDES_IREG_RX_CALEQ_2_DFETAP1GAIN_SHIFT                        3

#define SERDES_IREG_RX_CALEQ_3_REG_NUM                                  26
#define SERDES_IREG_RX_CALEQ_3_DFETAP2GAIN_MASK                         0xf
#define SERDES_IREG_RX_CALEQ_3_DFETAP2GAIN_SHIFT                        0
#define SERDES_IREG_RX_CALEQ_3_DFETAP3GAIN_MASK                         0xf0
#define SERDES_IREG_RX_CALEQ_3_DFETAP3GAIN_SHIFT                        4

#define SERDES_IREG_RX_CALEQ_4_REG_NUM                                  27
#define SERDES_IREG_RX_CALEQ_4_DFETAP4GAIN_MASK                         0xf
#define SERDES_IREG_RX_CALEQ_4_DFETAP4GAIN_SHIFT                        0
#define SERDES_IREG_RX_CALEQ_4_LOFREQAGCGAIN_MASK                       0x70
#define SERDES_IREG_RX_CALEQ_4_LOFREQAGCGAIN_SHIFT                      4

#define SERDES_IREG_RX_CALEQ_5_REG_NUM                                  28
#define SERDES_IREG_RX_CALEQ_5_PRECAL_CODE_SEL_MASK                     0x7
#define SERDES_IREG_RX_CALEQ_5_PRECAL_CODE_SEL_SHIFT                    0
#define SERDES_IREG_RX_CALEQ_5_HIFREQAGCCAP_MASK                        0xf8
#define SERDES_IREG_RX_CALEQ_5_HIFREQAGCCAP_SHIFT                       3

/* RX lane best eye point measurement result */
#define SERDES_IREG_RXEQ_BEST_EYE_MSB_VAL_REG_NUM                       29
#define SERDES_IREG_RXEQ_BEST_EYE_LSB_VAL_REG_NUM                       30
#define SERDES_IREG_RXEQ_BEST_EYE_LSB_VAL_MASK                          0x3F

/*
 * Adaptive RX Equalization enable
 * 0 - Disables adaptive RX equalization.
 * 1 - Enables adaptive RX equalization.
 */
#define SERDES_IREG_FLD_PCSRXEQ_START_REG_NUM                           31
#define SERDES_IREG_FLD_PCSRXEQ_START                                   (1 << 0)

/*
 * Enables an eye diagram measurement
 * within the PHY.
 * 0 - Disables eye diagram measurement
 * 1 - Enables eye diagram measurement
 */
#define SERDES_IREG_FLD_RXCALEYEDIAGFSMIN_START_REG_NUM                 31
#define SERDES_IREG_FLD_RXCALEYEDIAGFSMIN_START                         (1 << 1)


/*
 * RX lane single roam eye point measurement start signal.
 * If asserted, single measurement at fix XADJUST and YADJUST is started.
 */
#define SERDES_IREG_FLD_RXCALROAMEYEMEASIN_CYCLEEN_REG_NUM              31
#define SERDES_IREG_FLD_RXCALROAMEYEMEASIN_CYCLEEN_START                (1 << 2)


/*
 * PHY Eye diagram measurement status
 * signal
 * 0 - Indicates eye diagram results are not
 * valid for sampling
 * 1 - Indicates eye diagram is complete and
 * results are valid for sampling
 */
#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_DONE_REG_NUM                    32
#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_DONE                            (1 << 0)

/*
 * Eye diagram error signal. Indicates if the
 * measurement was invalid because the eye
 * diagram was interrupted by the link entering
 * electrical idle.
 * 0 - Indicates eye diagram is valid
 * 1- Indicates an error occurred, and the eye
 * diagram measurement should be re-run
 */
#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_ERR_REG_NUM                     32
#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_ERR                             (1 << 1)

/*
 * PHY Adaptive Equalization status
 * 0 - Indicates Adaptive Equalization results are not valid for sampling
 * 1 - Indicates Adaptive Equalization is complete and results are valid for
 *     sampling
 */
#define SERDES_IREG_FLD_RXCALROAMEYEMEASDONE_REG_NUM                    32
#define SERDES_IREG_FLD_RXCALROAMEYEMEASDONE                            (1 << 2)

/*
 *
 * PHY Adaptive Equalization Status Signal
 * 0 – Indicates adaptive equalization results
 * are not valid for sampling
 * 1 – Indicates adaptive equalization is
 * complete and results are valid for sampling.
 */
#define SERDES_IREG_FLD_RXEQ_DONE_REG_NUM                               32
#define SERDES_IREG_FLD_RXEQ_DONE                                       (1 << 3)


/*
 * 7-bit eye diagram time adjust control
 * - 6-bits per UI
 * - spans 2 UI
 */
#define SERDES_IREG_FLD_RXCALROAMXADJUST_REG_NUM                        33

/* 6-bit eye diagram voltage adjust control - spans +/-300mVdiff */
#define SERDES_IREG_FLD_RXCALROAMYADJUST_REG_NUM                        34

/*
 * Eye diagram status signal. Safe for
 * sampling when *DONE* signal has
 * asserted
 * 14'h0000 - Completely Closed Eye
 * 14'hFFFF - Completely Open Eye
 */
#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_EYESUM_MSB_REG_NUM              35
#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_EYESUM_MSB_MAKE                 0xFF
#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_EYESUM_MSB_SHIFT                0

#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_EYESUM_LSB_REG_NUM              36
#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_EYESUM_LSB_MAKE                 0x3F
#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_EYESUM_LSB_SHIFT                0

/*
 * RX lane single roam eye point measurement result.
 * If 0, eye is open at current XADJUST and YADJUST settings.
 */
#define SERDES_IREG_FLD_RXCALROAMEYEMEAS_ACC_MSB_REG_NUM                37
#define SERDES_IREG_FLD_RXCALROAMEYEMEAS_ACC_LSB_REG_NUM                38

/*
 * Override enable for CDR lock to reference clock
 * 0 - CDR is always locked to reference
 * 1 - CDR operation mode (Lock2Reference or Lock2data are controlled internally
 *     depending on the incoming signal and ppm status)
 */
#define SERDES_IREG_FLD_RXLOCK2REF_OVREN_REG_NUM                        39
#define SERDES_IREG_FLD_RXLOCK2REF_OVREN                                (1 << 1)

/*
 * Selects Eye to capture based on edge
 * 0 - Capture 1st Eye in Eye Diagram
 * 1 - Capture 2nd Eye in Eye Diagram measurement
 */
#define SERDES_IREG_FLD_RXROAM_XORBITSEL_REG_NUM                        39
#define SERDES_IREG_FLD_RXROAM_XORBITSEL                                (1 << 2)
#define SERDES_IREG_FLD_RXROAM_XORBITSEL_1ST                            0
#define SERDES_IREG_FLD_RXROAM_XORBITSEL_2ND                            (1 << 2)

/*
 * RX Signal detect. 0 indicates no signal, 1 indicates signal detected.
 */
#define SERDES_IREG_FLD_RXRANDET_REG_NUM                                41
#define SERDES_IREG_FLD_RXRANDET_STAT                                   0x20

/*
 * RX data polarity inversion control:
 * 1'b0: no inversion
 * 1'b1: invert polarity
 */
#define SERDES_IREG_FLD_POLARITY_RX_REG_NUM                             46
#define SERDES_IREG_FLD_POLARITY_RX_INV                                 (1 << 0)

/*
 * TX data polarity inversion control:
 * 1'b0: no inversion
 * 1'b1: invert polarity
 */
#define SERDES_IREG_FLD_POLARITY_TX_REG_NUM                             46
#define SERDES_IREG_FLD_POLARITY_TX_INV                                 (1 << 1)

/* LANEPCSPSTATE* override enable (Active low) */
#define SERDES_IREG_FLD_LANEPCSPSTATE_LOCWREN_REG_NUM                   85
#define SERDES_IREG_FLD_LANEPCSPSTATE_LOCWREN                           (1 << 0)

/* LB* override enable (Active low) */
#define SERDES_IREG_FLD_LB_LOCWREN_REG_NUM                              85
#define SERDES_IREG_FLD_LB_LOCWREN                                      (1 << 1)

/* PCSRX* override enable (Active low) */
#define SERDES_IREG_FLD_PCSRX_LOCWREN_REG_NUM                           85
#define SERDES_IREG_FLD_PCSRX_LOCWREN                                   (1 << 4)

/* PCSRXBIST* override enable (Active low) */
#define SERDES_IREG_FLD_PCSRXBIST_LOCWREN_REG_NUM                       85
#define SERDES_IREG_FLD_PCSRXBIST_LOCWREN                               (1 << 5)

/* PCSRXEQ* override enable (Active low) */
#define SERDES_IREG_FLD_PCSRXEQ_LOCWREN_REG_NUM                         85
#define SERDES_IREG_FLD_PCSRXEQ_LOCWREN                                 (1 << 6)

/* PCSTX* override enable (Active low) */
#define SERDES_IREG_FLD_PCSTX_LOCWREN_REG_NUM                           85
#define SERDES_IREG_FLD_PCSTX_LOCWREN                                   (1 << 7)

/*
 * group registers:
 * SERDES_IREG_FLD_RXCALEYEDIAGFSMIN_LOCWREN,
 * SERDES_IREG_FLD_RXCALROAMEYEMEASIN_LOCWREN
 * SERDES_IREG_FLD_RXCALROAMXADJUST_LOCWREN
 */
#define SERDES_IREG_FLD_RXCAL_LOCWREN_REG_NUM                           86

/* PCSTXBIST* override enable (Active low) */
#define SERDES_IREG_FLD_PCSTXBIST_LOCWREN_REG_NUM                       86
#define SERDES_IREG_FLD_PCSTXBIST_LOCWREN                               (1 << 0)

/* Override RX_CALCEQ through the internal registers (Active low) */
#define SERDES_IREG_FLD_RX_DRV_OVERRIDE_EN_REG_NUM                      86
#define SERDES_IREG_FLD_RX_DRV_OVERRIDE_EN                              (1 << 3)

#define SERDES_IREG_FLD_RXCALEYEDIAGFSMIN_LOCWREN_REG_NUM               86
#define SERDES_IREG_FLD_RXCALEYEDIAGFSMIN_LOCWREN                       (1 << 4)


/* RXCALROAMEYEMEASIN* override enable - Active Low */
#define SERDES_IREG_FLD_RXCALROAMEYEMEASIN_LOCWREN_REG_NUM              86
#define SERDES_IREG_FLD_RXCALROAMEYEMEASIN_LOCWREN                      (1 << 6)

/* RXCALROAMXADJUST* override enable - Active Low */
#define SERDES_IREG_FLD_RXCALROAMXADJUST_LOCWREN_REG_NUM                86
#define SERDES_IREG_FLD_RXCALROAMXADJUST_LOCWREN                        (1 << 7)

/* RXCALROAMYADJUST* override enable - Active Low */
#define SERDES_IREG_FLD_RXCALROAMYADJUST_LOCWREN_REG_NUM                87
#define SERDES_IREG_FLD_RXCALROAMYADJUST_LOCWREN                        (1 << 0)

/* RXCDRCALFOSC* override enable. Active Low */
#define SERDES_IREG_FLD_RXCDRCALFOSC_LOCWREN_REG_NUM                    87
#define SERDES_IREG_FLD_RXCDRCALFOSC_LOCWREN                            (1 << 1)

/* Over-write enable for RXEYEDIAGFSM_INITXVAL */
#define SERDES_IREG_FLD_RXEYEDIAGFSM_LOCWREN_REG_NUM                    87
#define SERDES_IREG_FLD_RXEYEDIAGFSM_LOCWREN                            (1 << 2)

/* Over-write enable for CMNCLKGENMUXSEL_TXINTERNAL */
#define SERDES_IREG_FLD_RXTERMHIZ_LOCWREN_REG_NUM                       87
#define SERDES_IREG_FLD_RXTERMHIZ_LOCWREN                               (1 << 3)

/* TXCALTCLKDUTY* override enable. Active Low */
#define SERDES_IREG_FLD_TXCALTCLKDUTY_LOCWREN_REG_NUM                   87
#define SERDES_IREG_FLD_TXCALTCLKDUTY_LOCWREN                           (1 << 4)

/* Override TX_DRV through the internal registers (Active low) */
#define SERDES_IREG_FLD_TX_DRV_OVERRIDE_EN_REG_NUM                      87
#define SERDES_IREG_FLD_TX_DRV_OVERRIDE_EN                              (1 << 5)

/*******************************************************************************
 * Common lane register fields - PMA
 ******************************************************************************/
/*
 * Common lane hard reset control
 * 0 - Hard reset is taken from the interface pins
 * 1 - Hard reset is taken from registers
 */
#define SERDES_IREG_FLD_CMNCTLPOR_HARDRSTBYPASSEN_SYNTH_REG_NUM         2
#define SERDES_IREG_FLD_CMNCTLPOR_HARDRSTBYPASSEN_SYNTH_MASK            0x01
#define SERDES_IREG_FLD_CMNCTLPOR_HARDRSTBYPASSEN_SYNTH_VAL_IFACE       0x00
#define SERDES_IREG_FLD_CMNCTLPOR_HARDRSTBYPASSEN_SYNTH_VAL_REGS        0x01

/*
 * Common lane hard reset
 * 0 - Hard reset is asserted
 * 1 - Hard reset is de-asserted
 */
#define SERDES_IREG_FLD_CMNCTLPOR_HARDRSTBYPASS_SYNTH_REG_NUM           2
#define SERDES_IREG_FLD_CMNCTLPOR_HARDRSTBYPASS_SYNTH_MASK              0x02
#define SERDES_IREG_FLD_CMNCTLPOR_HARDRSTBYPASS_SYNTH_VAL_ASSERT        0x00
#define SERDES_IREG_FLD_CMNCTLPOR_HARDRSTBYPASS_SYNTH_VAL_DEASSERT      0x02

/* Synth power state control */
#define SERDES_IREG_FLD_CMNPCSPSTATE_SYNTH_REG_NUM                      3
#define SERDES_IREG_FLD_CMNPCSPSTATE_SYNTH_MASK                         0x1f
#define SERDES_IREG_FLD_CMNPCSPSTATE_SYNTH_VAL_PD                       0x01
#define SERDES_IREG_FLD_CMNPCSPSTATE_SYNTH_VAL_P2                       0x02
#define SERDES_IREG_FLD_CMNPCSPSTATE_SYNTH_VAL_P1                       0x04
#define SERDES_IREG_FLD_CMNPCSPSTATE_SYNTH_VAL_P0S                      0x08
#define SERDES_IREG_FLD_CMNPCSPSTATE_SYNTH_VAL_P0                       0x10

/* Transmit datapath FIFO enable (Active High) */
#define SERDES_IREG_FLD_CMNPCS_TXENABLE_REG_NUM                         8
#define SERDES_IREG_FLD_CMNPCS_TXENABLE                                 (1 << 2)

/*
 * RX lost of signal detector enable
 * - 0 - disable
 * - 1 - enable
 */
#define SERDES_IREG_FLD_RXLOSDET_ENABLE_REG_NUM                         13
#define SERDES_IREG_FLD_RXLOSDET_ENABLE                                 AL_BIT(4)

/* Signal Detect Threshold Level */
#define SERDES_IREG_FLD_RXELECIDLE_SIGDETTHRESH_REG_NUM                 15
#define SERDES_IREG_FLD_RXELECIDLE_SIGDETTHRESH_MASK                    AL_FIELD_MASK(2, 0)

/* LOS Detect Threshold Level */
#define SERDES_IREG_FLD_RXLOSDET_THRESH_REG_NUM                         15
#define SERDES_IREG_FLD_RXLOSDET_THRESH_MASK                            AL_FIELD_MASK(4, 3)
#define SERDES_IREG_FLD_RXLOSDET_THRESH_SHIFT                           3

#define SERDES_IREG_FLD_RXEQ_COARSE_ITER_NUM_REG_NUM                    30
#define SERDES_IREG_FLD_RXEQ_COARSE_ITER_NUM_MASK                       0x7f
#define SERDES_IREG_FLD_RXEQ_COARSE_ITER_NUM_SHIFT                      0

#define SERDES_IREG_FLD_RXEQ_FINE_ITER_NUM_REG_NUM                      31
#define SERDES_IREG_FLD_RXEQ_FINE_ITER_NUM_MASK                         0x7f
#define SERDES_IREG_FLD_RXEQ_FINE_ITER_NUM_SHIFT                        0

#define SERDES_IREG_FLD_RXEQ_COARSE_RUN1_MASK_REG_NUM                   32
#define SERDES_IREG_FLD_RXEQ_COARSE_RUN1_MASK_MASK                      0xff
#define SERDES_IREG_FLD_RXEQ_COARSE_RUN1_MASK_SHIFT                     0

#define SERDES_IREG_FLD_RXEQ_COARSE_RUN2_MASK_REG_NUM                   33
#define SERDES_IREG_FLD_RXEQ_COARSE_RUN2_MASK_MASK                      0x1
#define SERDES_IREG_FLD_RXEQ_COARSE_RUN2_MASK_SHIFT                     0

#define SERDES_IREG_FLD_RXEQ_COARSE_STEP_REG_NUM                        33
#define SERDES_IREG_FLD_RXEQ_COARSE_STEP_MASK                           0x3e
#define SERDES_IREG_FLD_RXEQ_COARSE_STEP_SHIFT                          1

#define SERDES_IREG_FLD_RXEQ_FINE_RUN1_MASK_REG_NUM                     34
#define SERDES_IREG_FLD_RXEQ_FINE_RUN1_MASK_MASK                        0xff
#define SERDES_IREG_FLD_RXEQ_FINE_RUN1_MASK_SHIFT                       0

#define SERDES_IREG_FLD_RXEQ_FINE_RUN2_MASK_REG_NUM                     35
#define SERDES_IREG_FLD_RXEQ_FINE_RUN2_MASK_MASK                        0x1
#define SERDES_IREG_FLD_RXEQ_FINE_RUN2_MASK_SHIFT                       0

#define SERDES_IREG_FLD_RXEQ_FINE_STEP_REG_NUM                          35
#define SERDES_IREG_FLD_RXEQ_FINE_STEP_MASK                             0x3e
#define SERDES_IREG_FLD_RXEQ_FINE_STEP_SHIFT                            1

#define SERDES_IREG_FLD_RXEQ_LOOKUP_CODE_EN_REG_NUM                     36
#define SERDES_IREG_FLD_RXEQ_LOOKUP_CODE_EN_MASK                        0xff
#define SERDES_IREG_FLD_RXEQ_LOOKUP_CODE_EN_SHIFT                       0

#define SERDES_IREG_FLD_RXEQ_LOOKUP_LASTCODE_REG_NUM                    37
#define SERDES_IREG_FLD_RXEQ_LOOKUP_LASTCODE_MASK                       0x7
#define SERDES_IREG_FLD_RXEQ_LOOKUP_LASTCODE_SHIFT                      0

#define SERDES_IREG_FLD_RXEQ_DCGAIN_LUP0_REG_NUM                        43
#define SERDES_IREG_FLD_RXEQ_DCGAIN_LUP0_MASK                           0x7
#define SERDES_IREG_FLD_RXEQ_DCGAIN_LUP0_SHIFT                          0

#define SERDES_IREG_FLD_TX_BIST_PAT_REG_NUM(byte_num)                   (56 + (byte_num))
#define SERDES_IREG_FLD_TX_BIST_PAT_NUM_BYTES                           10

/*
 * Selects the transmit BIST mode:
 * 0 - Uses the 80-bit internal memory pattern (w/ OOB)
 * 1 - Uses a 27 PRBS pattern
 * 2 - Uses a 223 PRBS pattern
 * 3 - Uses a 231 PRBS pattern
 * 4 - Uses a 1010 clock pattern
 * 5 and above - Reserved
 */
#define SERDES_IREG_FLD_CMNPCSBIST_MODESEL_REG_NUM                      80
#define SERDES_IREG_FLD_CMNPCSBIST_MODESEL_MASK                         0x07
#define SERDES_IREG_FLD_CMNPCSBIST_MODESEL_VAL_USER                     0x00
#define SERDES_IREG_FLD_CMNPCSBIST_MODESEL_VAL_PRBS7                    0x01
#define SERDES_IREG_FLD_CMNPCSBIST_MODESEL_VAL_PRBS23                   0x02
#define SERDES_IREG_FLD_CMNPCSBIST_MODESEL_VAL_PRBS31                   0x03
#define SERDES_IREG_FLD_CMNPCSBIST_MODESEL_VAL_CLK1010                  0x04

/* Single-Bit error injection enable (on posedge) */
#define SERDES_IREG_FLD_TXBIST_BITERROR_EN_REG_NUM                      80
#define SERDES_IREG_FLD_TXBIST_BITERROR_EN                              0x20

/* CMNPCIEGEN3* override enable (Active Low) */
#define SERDES_IREG_FLD_CMNPCIEGEN3_LOCWREN_REG_NUM                     95
#define SERDES_IREG_FLD_CMNPCIEGEN3_LOCWREN                             (1 << 2)

/* CMNPCS* override enable (Active Low) */
#define SERDES_IREG_FLD_CMNPCS_LOCWREN_REG_NUM                          95
#define SERDES_IREG_FLD_CMNPCS_LOCWREN                                  (1 << 3)

/* CMNPCSBIST* override enable (Active Low) */
#define SERDES_IREG_FLD_CMNPCSBIST_LOCWREN_REG_NUM                      95
#define SERDES_IREG_FLD_CMNPCSBIST_LOCWREN                              (1 << 4)

/* CMNPCSPSTATE* override enable (Active Low) */
#define SERDES_IREG_FLD_CMNPCSPSTATE_LOCWREN_REG_NUM                    95
#define SERDES_IREG_FLD_CMNPCSPSTATE_LOCWREN                            (1 << 5)

/*  PCS_EN* override enable (Active Low) */
#define SERDES_IREG_FLD_PCS_LOCWREN_REG_NUM                             96
#define SERDES_IREG_FLD_PCS_LOCWREN                                     (1 << 3)

/* Eye diagram sample count */
#define SERDES_IREG_FLD_EYE_DIAG_SAMPLE_CNT_MSB_REG_NUM                 150
#define SERDES_IREG_FLD_EYE_DIAG_SAMPLE_CNT_MSB_MASK                    0xff
#define SERDES_IREG_FLD_EYE_DIAG_SAMPLE_CNT_MSB_SHIFT                   0

#define SERDES_IREG_FLD_EYE_DIAG_SAMPLE_CNT_LSB_REG_NUM                 151
#define SERDES_IREG_FLD_EYE_DIAG_SAMPLE_CNT_LSB_MASK                    0xff
#define SERDES_IREG_FLD_EYE_DIAG_SAMPLE_CNT_LSB_SHIFT                   0

/* override control */
#define SERDES_IREG_FLD_RXLOCK2REF_LOCWREN_REG_NUM                      230
#define SERDES_IREG_FLD_RXLOCK2REF_LOCWREN                              1 << 0

#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_BERTHRESHOLD1_REG_NUM           623
#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_BERTHRESHOLD1_MASK              0xff
#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_BERTHRESHOLD1_SHIFT             0

#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_BERTHRESHOLD2_REG_NUM           624
#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_BERTHRESHOLD2_MASK              0xff
#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_BERTHRESHOLD2_SHIFT             0

/* X and Y coefficient return value */
#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_X_Y_VALWEIGHT_REG_NUM           626
#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_XVALWEIGHT_MASK                 0x0F
#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_XVALWEIGHT_SHIFT                0
#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_YVALWEIGHT_MASK                 0xF0
#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_YVALWEIGHT_SHIFT                4

/* X coarse scan step */
#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_XVALCOARSE_REG_NUM              627
#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_XVALCOARSE_MASK                 0x7F
#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_XVALCOARSE_SHIFT                0

/* X fine scan step */
#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_XVALFINE_REG_NUM                628
#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_XVALFINE_MASK                   0x7F
#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_XVALFINE_SHIFT                  0

/* Y coarse scan step */
#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_YVALCOARSE_REG_NUM              629
#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_YVALCOARSE_MASK                 0x0F
#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_YVALCOARSE_SHIFT                0

/* Y fine scan step */
#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_YVALFINE_REG_NUM                630
#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_YVALFINE_MASK                   0x0F
#define SERDES_IREG_FLD_RXCALEYEDIAGFSM_YVALFINE_SHIFT                  0

#define SERDES_IREG_FLD_PPMDRIFTCOUNT1_REG_NUM                          157

#define SERDES_IREG_FLD_PPMDRIFTCOUNT2_REG_NUM                          158

#define SERDES_IREG_FLD_PPMDRIFTMAX1_REG_NUM                            159

#define SERDES_IREG_FLD_PPMDRIFTMAX2_REG_NUM                            160

#define SERDES_IREG_FLD_SYNTHPPMDRIFTMAX1_REG_NUM                       163

#define SERDES_IREG_FLD_SYNTHPPMDRIFTMAX2_REG_NUM                       164

/*******************************************************************************
 * Common lane register fields - PCS
 ******************************************************************************/
#define SERDES_IREG_FLD_PCS_VPCSIF_OVR_RATE_REG_NUM                     3
#define SERDES_IREG_FLD_PCS_VPCSIF_OVR_RATE_MASK                        AL_FIELD_MASK(5, 4)
#define SERDES_IREG_FLD_PCS_VPCSIF_OVR_RATE_SHIFT                       4

#define SERDES_IREG_FLD_PCS_VPCSIF_OVR_RATE_ENA_REG_NUM                 6
#define SERDES_IREG_FLD_PCS_VPCSIF_OVR_RATE_ENA                         AL_BIT(2)

#define SERDES_IREG_FLD_PCS_EBUF_FULL_D2R1_REG_NUM                      18
#define SERDES_IREG_FLD_PCS_EBUF_FULL_D2R1_REG_MASK                     0x1F
#define SERDES_IREG_FLD_PCS_EBUF_FULL_D2R1_REG_SHIFT                    0

#define SERDES_IREG_FLD_PCS_EBUF_FULL_PCIE_G3_REG_NUM                   19
#define SERDES_IREG_FLD_PCS_EBUF_FULL_PCIE_G3_REG_MASK                  0x7C
#define SERDES_IREG_FLD_PCS_EBUF_FULL_PCIE_G3_REG_SHIFT                 2

#define SERDES_IREG_FLD_PCS_EBUF_RD_THRESHOLD_D2R1_REG_NUM              20
#define SERDES_IREG_FLD_PCS_EBUF_RD_THRESHOLD_D2R1_REG_MASK             0x1F
#define SERDES_IREG_FLD_PCS_EBUF_RD_THRESHOLD_D2R1_REG_SHIFT            0

#define SERDES_IREG_FLD_PCS_EBUF_RD_THRESHOLD_PCIE_G3_REG_NUM           21
#define SERDES_IREG_FLD_PCS_EBUF_RD_THRESHOLD_PCIE_G3_REG_MASK          0x7C
#define SERDES_IREG_FLD_PCS_EBUF_RD_THRESHOLD_PCIE_G3_REG_SHIFT         2

#define SERDES_IREG_FLD_PCS_RXEQ_COARSE_ITER_NUM_REG_NUM                22
#define SERDES_IREG_FLD_PCS_RXEQ_COARSE_ITER_NUM_MASK                   0x7f
#define SERDES_IREG_FLD_PCS_RXEQ_COARSE_ITER_NUM_SHIFT                  0

#define SERDES_IREG_FLD_PCS_RXEQ_FINE_ITER_NUM_REG_NUM                  34
#define SERDES_IREG_FLD_PCS_RXEQ_FINE_ITER_NUM_MASK                     0x7f
#define SERDES_IREG_FLD_PCS_RXEQ_FINE_ITER_NUM_SHIFT                    0

#define SERDES_IREG_FLD_PCS_RXEQ_COARSE_RUN1_MASK_REG_NUM               23
#define SERDES_IREG_FLD_PCS_RXEQ_COARSE_RUN1_MASK_MASK                  0xff
#define SERDES_IREG_FLD_PCS_RXEQ_COARSE_RUN1_MASK_SHIFT                 0

#define SERDES_IREG_FLD_PCS_RXEQ_COARSE_RUN2_MASK_REG_NUM               22
#define SERDES_IREG_FLD_PCS_RXEQ_COARSE_RUN2_MASK_MASK                  0x80
#define SERDES_IREG_FLD_PCS_RXEQ_COARSE_RUN2_MASK_SHIFT                 7

#define SERDES_IREG_FLD_PCS_RXEQ_COARSE_STEP_REG_NUM                    24
#define SERDES_IREG_FLD_PCS_RXEQ_COARSE_STEP_MASK                       0x3e
#define SERDES_IREG_FLD_PCS_RXEQ_COARSE_STEP_SHIFT                      1

#define SERDES_IREG_FLD_PCS_RXEQ_FINE_RUN1_MASK_REG_NUM                 35
#define SERDES_IREG_FLD_PCS_RXEQ_FINE_RUN1_MASK_MASK                    0xff
#define SERDES_IREG_FLD_PCS_RXEQ_FINE_RUN1_MASK_SHIFT                   0

#define SERDES_IREG_FLD_PCS_RXEQ_FINE_RUN2_MASK_REG_NUM                 34
#define SERDES_IREG_FLD_PCS_RXEQ_FINE_RUN2_MASK_MASK                    0x80
#define SERDES_IREG_FLD_PCS_RXEQ_FINE_RUN2_MASK_SHIFT                   7

#define SERDES_IREG_FLD_PCS_RXEQ_FINE_STEP_REG_NUM                      36
#define SERDES_IREG_FLD_PCS_RXEQ_FINE_STEP_MASK                         0x1f
#define SERDES_IREG_FLD_PCS_RXEQ_FINE_STEP_SHIFT                        0

#define SERDES_IREG_FLD_PCS_RXEQ_LOOKUP_CODE_EN_REG_NUM                 37
#define SERDES_IREG_FLD_PCS_RXEQ_LOOKUP_CODE_EN_MASK                    0xff
#define SERDES_IREG_FLD_PCS_RXEQ_LOOKUP_CODE_EN_SHIFT                   0

#define SERDES_IREG_FLD_PCS_RXEQ_LOOKUP_LASTCODE_REG_NUM                36
#define SERDES_IREG_FLD_PCS_RXEQ_LOOKUP_LASTCODE_MASK                   0xe0
#define SERDES_IREG_FLD_PCS_RXEQ_LOOKUP_LASTCODE_SHIFT                  5

#ifdef __cplusplus
}
#endif

#endif /* __AL_serdes_REG_H */