ssh: Update to OpenSSH 9.4p1

[FreeBSD/FreeBSD.git] / sys / contrib / openzfs / module / zfs / metaslab.c

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or https://opensource.org/licenses/CDDL-1.0.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
 * Copyright (c) 2011, 2019 by Delphix. All rights reserved.
 * Copyright (c) 2013 by Saso Kiselkov. All rights reserved.
 * Copyright (c) 2015, Nexenta Systems, Inc. All rights reserved.
 * Copyright (c) 2017, Intel Corporation.
 */

#include <sys/zfs_context.h>
#include <sys/dmu.h>
#include <sys/dmu_tx.h>
#include <sys/space_map.h>
#include <sys/metaslab_impl.h>
#include <sys/vdev_impl.h>
#include <sys/vdev_draid.h>
#include <sys/zio.h>
#include <sys/spa_impl.h>
#include <sys/zfeature.h>
#include <sys/vdev_indirect_mapping.h>
#include <sys/zap.h>
#include <sys/btree.h>

#define WITH_DF_BLOCK_ALLOCATOR

#define GANG_ALLOCATION(flags) \
        ((flags) & (METASLAB_GANG_CHILD | METASLAB_GANG_HEADER))

/*
 * Metaslab granularity, in bytes. This is roughly similar to what would be
 * referred to as the "stripe size" in traditional RAID arrays. In normal
 * operation, we will try to write this amount of data to each disk before
 * moving on to the next top-level vdev.
 */
static uint64_t metaslab_aliquot = 1024 * 1024;

/*
 * For testing, make some blocks above a certain size be gang blocks.
 */
uint64_t metaslab_force_ganging = SPA_MAXBLOCKSIZE + 1;

/*
 * In pools where the log space map feature is not enabled we touch
 * multiple metaslabs (and their respective space maps) with each
 * transaction group. Thus, we benefit from having a small space map
 * block size since it allows us to issue more I/O operations scattered
 * around the disk. So a sane default for the space map block size
 * is 8~16K.
 */
int zfs_metaslab_sm_blksz_no_log = (1 << 14);

/*
 * When the log space map feature is enabled, we accumulate a lot of
 * changes per metaslab that are flushed once in a while so we benefit
 * from a bigger block size like 128K for the metaslab space maps.
 */
int zfs_metaslab_sm_blksz_with_log = (1 << 17);

/*
 * The in-core space map representation is more compact than its on-disk form.
 * The zfs_condense_pct determines how much more compact the in-core
 * space map representation must be before we compact it on-disk.
 * Values should be greater than or equal to 100.
 */
uint_t zfs_condense_pct = 200;

/*
 * Condensing a metaslab is not guaranteed to actually reduce the amount of
 * space used on disk. In particular, a space map uses data in increments of
 * MAX(1 << ashift, space_map_blksz), so a metaslab might use the
 * same number of blocks after condensing. Since the goal of condensing is to
 * reduce the number of IOPs required to read the space map, we only want to
 * condense when we can be sure we will reduce the number of blocks used by the
 * space map. Unfortunately, we cannot precisely compute whether or not this is
 * the case in metaslab_should_condense since we are holding ms_lock. Instead,
 * we apply the following heuristic: do not condense a spacemap unless the
 * uncondensed size consumes greater than zfs_metaslab_condense_block_threshold
 * blocks.
 */
static const int zfs_metaslab_condense_block_threshold = 4;

/*
 * The zfs_mg_noalloc_threshold defines which metaslab groups should
 * be eligible for allocation. The value is defined as a percentage of
 * free space. Metaslab groups that have more free space than
 * zfs_mg_noalloc_threshold are always eligible for allocations. Once
 * a metaslab group's free space is less than or equal to the
 * zfs_mg_noalloc_threshold the allocator will avoid allocating to that
 * group unless all groups in the pool have reached zfs_mg_noalloc_threshold.
 * Once all groups in the pool reach zfs_mg_noalloc_threshold then all
 * groups are allowed to accept allocations. Gang blocks are always
 * eligible to allocate on any metaslab group. The default value of 0 means
 * no metaslab group will be excluded based on this criterion.
 */
static uint_t zfs_mg_noalloc_threshold = 0;

/*
 * Metaslab groups are considered eligible for allocations if their
 * fragmentation metric (measured as a percentage) is less than or
 * equal to zfs_mg_fragmentation_threshold. If a metaslab group
 * exceeds this threshold then it will be skipped unless all metaslab
 * groups within the metaslab class have also crossed this threshold.
 *
 * This tunable was introduced to avoid edge cases where we continue
 * allocating from very fragmented disks in our pool while other, less
 * fragmented disks, exists. On the other hand, if all disks in the
 * pool are uniformly approaching the threshold, the threshold can
 * be a speed bump in performance, where we keep switching the disks
 * that we allocate from (e.g. we allocate some segments from disk A
 * making it bypassing the threshold while freeing segments from disk
 * B getting its fragmentation below the threshold).
 *
 * Empirically, we've seen that our vdev selection for allocations is
 * good enough that fragmentation increases uniformly across all vdevs
 * the majority of the time. Thus we set the threshold percentage high
 * enough to avoid hitting the speed bump on pools that are being pushed
 * to the edge.
 */
static uint_t zfs_mg_fragmentation_threshold = 95;

/*
 * Allow metaslabs to keep their active state as long as their fragmentation
 * percentage is less than or equal to zfs_metaslab_fragmentation_threshold. An
 * active metaslab that exceeds this threshold will no longer keep its active
 * status allowing better metaslabs to be selected.
 */
static uint_t zfs_metaslab_fragmentation_threshold = 70;

/*
 * When set will load all metaslabs when pool is first opened.
 */
int metaslab_debug_load = B_FALSE;

/*
 * When set will prevent metaslabs from being unloaded.
 */
static int metaslab_debug_unload = B_FALSE;

/*
 * Minimum size which forces the dynamic allocator to change
 * it's allocation strategy.  Once the space map cannot satisfy
 * an allocation of this size then it switches to using more
 * aggressive strategy (i.e search by size rather than offset).
 */
uint64_t metaslab_df_alloc_threshold = SPA_OLD_MAXBLOCKSIZE;

/*
 * The minimum free space, in percent, which must be available
 * in a space map to continue allocations in a first-fit fashion.
 * Once the space map's free space drops below this level we dynamically
 * switch to using best-fit allocations.
 */
uint_t metaslab_df_free_pct = 4;

/*
 * Maximum distance to search forward from the last offset. Without this
 * limit, fragmented pools can see >100,000 iterations and
 * metaslab_block_picker() becomes the performance limiting factor on
 * high-performance storage.
 *
 * With the default setting of 16MB, we typically see less than 500
 * iterations, even with very fragmented, ashift=9 pools. The maximum number
 * of iterations possible is:
 *     metaslab_df_max_search / (2 * (1<<ashift))
 * With the default setting of 16MB this is 16*1024 (with ashift=9) or
 * 2048 (with ashift=12).
 */
static uint_t metaslab_df_max_search = 16 * 1024 * 1024;

/*
 * Forces the metaslab_block_picker function to search for at least this many
 * segments forwards until giving up on finding a segment that the allocation
 * will fit into.
 */
static const uint32_t metaslab_min_search_count = 100;

/*
 * If we are not searching forward (due to metaslab_df_max_search,
 * metaslab_df_free_pct, or metaslab_df_alloc_threshold), this tunable
 * controls what segment is used.  If it is set, we will use the largest free
 * segment.  If it is not set, we will use a segment of exactly the requested
 * size (or larger).
 */
static int metaslab_df_use_largest_segment = B_FALSE;

/*
 * Percentage of all cpus that can be used by the metaslab taskq.
 */
int metaslab_load_pct = 50;

/*
 * These tunables control how long a metaslab will remain loaded after the
 * last allocation from it.  A metaslab can't be unloaded until at least
 * metaslab_unload_delay TXG's and metaslab_unload_delay_ms milliseconds
 * have elapsed.  However, zfs_metaslab_mem_limit may cause it to be
 * unloaded sooner.  These settings are intended to be generous -- to keep
 * metaslabs loaded for a long time, reducing the rate of metaslab loading.
 */
static uint_t metaslab_unload_delay = 32;
static uint_t metaslab_unload_delay_ms = 10 * 60 * 1000; /* ten minutes */

/*
 * Max number of metaslabs per group to preload.
 */
uint_t metaslab_preload_limit = 10;

/*
 * Enable/disable preloading of metaslab.
 */
static int metaslab_preload_enabled = B_TRUE;

/*
 * Enable/disable fragmentation weighting on metaslabs.
 */
static int metaslab_fragmentation_factor_enabled = B_TRUE;

/*
 * Enable/disable lba weighting (i.e. outer tracks are given preference).
 */
static int metaslab_lba_weighting_enabled = B_TRUE;

/*
 * Enable/disable metaslab group biasing.
 */
static int metaslab_bias_enabled = B_TRUE;

/*
 * Enable/disable remapping of indirect DVAs to their concrete vdevs.
 */
static const boolean_t zfs_remap_blkptr_enable = B_TRUE;

/*
 * Enable/disable segment-based metaslab selection.
 */
static int zfs_metaslab_segment_weight_enabled = B_TRUE;

/*
 * When using segment-based metaslab selection, we will continue
 * allocating from the active metaslab until we have exhausted
 * zfs_metaslab_switch_threshold of its buckets.
 */
static int zfs_metaslab_switch_threshold = 2;

/*
 * Internal switch to enable/disable the metaslab allocation tracing
 * facility.
 */
static const boolean_t metaslab_trace_enabled = B_FALSE;

/*
 * Maximum entries that the metaslab allocation tracing facility will keep
 * in a given list when running in non-debug mode. We limit the number
 * of entries in non-debug mode to prevent us from using up too much memory.
 * The limit should be sufficiently large that we don't expect any allocation
 * to every exceed this value. In debug mode, the system will panic if this
 * limit is ever reached allowing for further investigation.
 */
static const uint64_t metaslab_trace_max_entries = 5000;

/*
 * Maximum number of metaslabs per group that can be disabled
 * simultaneously.
 */
static const int max_disabled_ms = 3;

/*
 * Time (in seconds) to respect ms_max_size when the metaslab is not loaded.
 * To avoid 64-bit overflow, don't set above UINT32_MAX.
 */
static uint64_t zfs_metaslab_max_size_cache_sec = 1 * 60 * 60; /* 1 hour */

/*
 * Maximum percentage of memory to use on storing loaded metaslabs. If loading
 * a metaslab would take it over this percentage, the oldest selected metaslab
 * is automatically unloaded.
 */
static uint_t zfs_metaslab_mem_limit = 25;

/*
 * Force the per-metaslab range trees to use 64-bit integers to store
 * segments. Used for debugging purposes.
 */
static const boolean_t zfs_metaslab_force_large_segs = B_FALSE;

/*
 * By default we only store segments over a certain size in the size-sorted
 * metaslab trees (ms_allocatable_by_size and
 * ms_unflushed_frees_by_size). This dramatically reduces memory usage and
 * improves load and unload times at the cost of causing us to use slightly
 * larger segments than we would otherwise in some cases.
 */
static const uint32_t metaslab_by_size_min_shift = 14;

/*
 * If not set, we will first try normal allocation.  If that fails then
 * we will do a gang allocation.  If that fails then we will do a "try hard"
 * gang allocation.  If that fails then we will have a multi-layer gang
 * block.
 *
 * If set, we will first try normal allocation.  If that fails then
 * we will do a "try hard" allocation.  If that fails we will do a gang
 * allocation.  If that fails we will do a "try hard" gang allocation.  If
 * that fails then we will have a multi-layer gang block.
 */
static int zfs_metaslab_try_hard_before_gang = B_FALSE;

/*
 * When not trying hard, we only consider the best zfs_metaslab_find_max_tries
 * metaslabs.  This improves performance, especially when there are many
 * metaslabs per vdev and the allocation can't actually be satisfied (so we
 * would otherwise iterate all the metaslabs).  If there is a metaslab with a
 * worse weight but it can actually satisfy the allocation, we won't find it
 * until trying hard.  This may happen if the worse metaslab is not loaded
 * (and the true weight is better than we have calculated), or due to weight
 * bucketization.  E.g. we are looking for a 60K segment, and the best
 * metaslabs all have free segments in the 32-63K bucket, but the best
 * zfs_metaslab_find_max_tries metaslabs have ms_max_size <60KB, and a
 * subsequent metaslab has ms_max_size >60KB (but fewer segments in this
 * bucket, and therefore a lower weight).
 */
static uint_t zfs_metaslab_find_max_tries = 100;

static uint64_t metaslab_weight(metaslab_t *, boolean_t);
static void metaslab_set_fragmentation(metaslab_t *, boolean_t);
static void metaslab_free_impl(vdev_t *, uint64_t, uint64_t, boolean_t);
static void metaslab_check_free_impl(vdev_t *, uint64_t, uint64_t);

static void metaslab_passivate(metaslab_t *msp, uint64_t weight);
static uint64_t metaslab_weight_from_range_tree(metaslab_t *msp);
static void metaslab_flush_update(metaslab_t *, dmu_tx_t *);
static unsigned int metaslab_idx_func(multilist_t *, void *);
static void metaslab_evict(metaslab_t *, uint64_t);
static void metaslab_rt_add(range_tree_t *rt, range_seg_t *rs, void *arg);
kmem_cache_t *metaslab_alloc_trace_cache;

typedef struct metaslab_stats {
        kstat_named_t metaslabstat_trace_over_limit;
        kstat_named_t metaslabstat_reload_tree;
        kstat_named_t metaslabstat_too_many_tries;
        kstat_named_t metaslabstat_try_hard;
} metaslab_stats_t;

static metaslab_stats_t metaslab_stats = {
        { "trace_over_limit",           KSTAT_DATA_UINT64 },
        { "reload_tree",                KSTAT_DATA_UINT64 },
        { "too_many_tries",             KSTAT_DATA_UINT64 },
        { "try_hard",                   KSTAT_DATA_UINT64 },
};

#define METASLABSTAT_BUMP(stat) \
        atomic_inc_64(&metaslab_stats.stat.value.ui64);


static kstat_t *metaslab_ksp;

void
metaslab_stat_init(void)
{
        ASSERT(metaslab_alloc_trace_cache == NULL);
        metaslab_alloc_trace_cache = kmem_cache_create(
            "metaslab_alloc_trace_cache", sizeof (metaslab_alloc_trace_t),
            0, NULL, NULL, NULL, NULL, NULL, 0);
        metaslab_ksp = kstat_create("zfs", 0, "metaslab_stats",
            "misc", KSTAT_TYPE_NAMED, sizeof (metaslab_stats) /
            sizeof (kstat_named_t), KSTAT_FLAG_VIRTUAL);
        if (metaslab_ksp != NULL) {
                metaslab_ksp->ks_data = &metaslab_stats;
                kstat_install(metaslab_ksp);
        }
}

void
metaslab_stat_fini(void)
{
        if (metaslab_ksp != NULL) {
                kstat_delete(metaslab_ksp);
                metaslab_ksp = NULL;
        }

        kmem_cache_destroy(metaslab_alloc_trace_cache);
        metaslab_alloc_trace_cache = NULL;
}

/*
 * ==========================================================================
 * Metaslab classes
 * ==========================================================================
 */
metaslab_class_t *
metaslab_class_create(spa_t *spa, const metaslab_ops_t *ops)
{
        metaslab_class_t *mc;

        mc = kmem_zalloc(offsetof(metaslab_class_t,
            mc_allocator[spa->spa_alloc_count]), KM_SLEEP);

        mc->mc_spa = spa;
        mc->mc_ops = ops;
        mutex_init(&mc->mc_lock, NULL, MUTEX_DEFAULT, NULL);
        multilist_create(&mc->mc_metaslab_txg_list, sizeof (metaslab_t),
            offsetof(metaslab_t, ms_class_txg_node), metaslab_idx_func);
        for (int i = 0; i < spa->spa_alloc_count; i++) {
                metaslab_class_allocator_t *mca = &mc->mc_allocator[i];
                mca->mca_rotor = NULL;
                zfs_refcount_create_tracked(&mca->mca_alloc_slots);
        }

        return (mc);
}

void
metaslab_class_destroy(metaslab_class_t *mc)
{
        spa_t *spa = mc->mc_spa;

        ASSERT(mc->mc_alloc == 0);
        ASSERT(mc->mc_deferred == 0);
        ASSERT(mc->mc_space == 0);
        ASSERT(mc->mc_dspace == 0);

        for (int i = 0; i < spa->spa_alloc_count; i++) {
                metaslab_class_allocator_t *mca = &mc->mc_allocator[i];
                ASSERT(mca->mca_rotor == NULL);
                zfs_refcount_destroy(&mca->mca_alloc_slots);
        }
        mutex_destroy(&mc->mc_lock);
        multilist_destroy(&mc->mc_metaslab_txg_list);
        kmem_free(mc, offsetof(metaslab_class_t,
            mc_allocator[spa->spa_alloc_count]));
}

int
metaslab_class_validate(metaslab_class_t *mc)
{
        metaslab_group_t *mg;
        vdev_t *vd;

        /*
         * Must hold one of the spa_config locks.
         */
        ASSERT(spa_config_held(mc->mc_spa, SCL_ALL, RW_READER) ||
            spa_config_held(mc->mc_spa, SCL_ALL, RW_WRITER));

        if ((mg = mc->mc_allocator[0].mca_rotor) == NULL)
                return (0);

        do {
                vd = mg->mg_vd;
                ASSERT(vd->vdev_mg != NULL);
                ASSERT3P(vd->vdev_top, ==, vd);
                ASSERT3P(mg->mg_class, ==, mc);
                ASSERT3P(vd->vdev_ops, !=, &vdev_hole_ops);
        } while ((mg = mg->mg_next) != mc->mc_allocator[0].mca_rotor);

        return (0);
}

static void
metaslab_class_space_update(metaslab_class_t *mc, int64_t alloc_delta,
    int64_t defer_delta, int64_t space_delta, int64_t dspace_delta)
{
        atomic_add_64(&mc->mc_alloc, alloc_delta);
        atomic_add_64(&mc->mc_deferred, defer_delta);
        atomic_add_64(&mc->mc_space, space_delta);
        atomic_add_64(&mc->mc_dspace, dspace_delta);
}

uint64_t
metaslab_class_get_alloc(metaslab_class_t *mc)
{
        return (mc->mc_alloc);
}

uint64_t
metaslab_class_get_deferred(metaslab_class_t *mc)
{
        return (mc->mc_deferred);
}

uint64_t
metaslab_class_get_space(metaslab_class_t *mc)
{
        return (mc->mc_space);
}

uint64_t
metaslab_class_get_dspace(metaslab_class_t *mc)
{
        return (spa_deflate(mc->mc_spa) ? mc->mc_dspace : mc->mc_space);
}

void
metaslab_class_histogram_verify(metaslab_class_t *mc)
{
        spa_t *spa = mc->mc_spa;
        vdev_t *rvd = spa->spa_root_vdev;
        uint64_t *mc_hist;
        int i;

        if ((zfs_flags & ZFS_DEBUG_HISTOGRAM_VERIFY) == 0)
                return;

        mc_hist = kmem_zalloc(sizeof (uint64_t) * RANGE_TREE_HISTOGRAM_SIZE,
            KM_SLEEP);

        mutex_enter(&mc->mc_lock);
        for (int c = 0; c < rvd->vdev_children; c++) {
                vdev_t *tvd = rvd->vdev_child[c];
                metaslab_group_t *mg = vdev_get_mg(tvd, mc);

                /*
                 * Skip any holes, uninitialized top-levels, or
                 * vdevs that are not in this metalab class.
                 */
                if (!vdev_is_concrete(tvd) || tvd->vdev_ms_shift == 0 ||
                    mg->mg_class != mc) {
                        continue;
                }

                IMPLY(mg == mg->mg_vd->vdev_log_mg,
                    mc == spa_embedded_log_class(mg->mg_vd->vdev_spa));

                for (i = 0; i < RANGE_TREE_HISTOGRAM_SIZE; i++)
                        mc_hist[i] += mg->mg_histogram[i];
        }

        for (i = 0; i < RANGE_TREE_HISTOGRAM_SIZE; i++) {
                VERIFY3U(mc_hist[i], ==, mc->mc_histogram[i]);
        }

        mutex_exit(&mc->mc_lock);
        kmem_free(mc_hist, sizeof (uint64_t) * RANGE_TREE_HISTOGRAM_SIZE);
}

/*
 * Calculate the metaslab class's fragmentation metric. The metric
 * is weighted based on the space contribution of each metaslab group.
 * The return value will be a number between 0 and 100 (inclusive), or
 * ZFS_FRAG_INVALID if the metric has not been set. See comment above the
 * zfs_frag_table for more information about the metric.
 */
uint64_t
metaslab_class_fragmentation(metaslab_class_t *mc)
{
        vdev_t *rvd = mc->mc_spa->spa_root_vdev;
        uint64_t fragmentation = 0;

        spa_config_enter(mc->mc_spa, SCL_VDEV, FTAG, RW_READER);

        for (int c = 0; c < rvd->vdev_children; c++) {
                vdev_t *tvd = rvd->vdev_child[c];
                metaslab_group_t *mg = tvd->vdev_mg;

                /*
                 * Skip any holes, uninitialized top-levels,
                 * or vdevs that are not in this metalab class.
                 */
                if (!vdev_is_concrete(tvd) || tvd->vdev_ms_shift == 0 ||
                    mg->mg_class != mc) {
                        continue;
                }

                /*
                 * If a metaslab group does not contain a fragmentation
                 * metric then just bail out.
                 */
                if (mg->mg_fragmentation == ZFS_FRAG_INVALID) {
                        spa_config_exit(mc->mc_spa, SCL_VDEV, FTAG);
                        return (ZFS_FRAG_INVALID);
                }

                /*
                 * Determine how much this metaslab_group is contributing
                 * to the overall pool fragmentation metric.
                 */
                fragmentation += mg->mg_fragmentation *
                    metaslab_group_get_space(mg);
        }
        fragmentation /= metaslab_class_get_space(mc);

        ASSERT3U(fragmentation, <=, 100);
        spa_config_exit(mc->mc_spa, SCL_VDEV, FTAG);
        return (fragmentation);
}

/*
 * Calculate the amount of expandable space that is available in
 * this metaslab class. If a device is expanded then its expandable
 * space will be the amount of allocatable space that is currently not
 * part of this metaslab class.
 */
uint64_t
metaslab_class_expandable_space(metaslab_class_t *mc)
{
        vdev_t *rvd = mc->mc_spa->spa_root_vdev;
        uint64_t space = 0;

        spa_config_enter(mc->mc_spa, SCL_VDEV, FTAG, RW_READER);
        for (int c = 0; c < rvd->vdev_children; c++) {
                vdev_t *tvd = rvd->vdev_child[c];
                metaslab_group_t *mg = tvd->vdev_mg;

                if (!vdev_is_concrete(tvd) || tvd->vdev_ms_shift == 0 ||
                    mg->mg_class != mc) {
                        continue;
                }

                /*
                 * Calculate if we have enough space to add additional
                 * metaslabs. We report the expandable space in terms
                 * of the metaslab size since that's the unit of expansion.
                 */
                space += P2ALIGN(tvd->vdev_max_asize - tvd->vdev_asize,
                    1ULL << tvd->vdev_ms_shift);
        }
        spa_config_exit(mc->mc_spa, SCL_VDEV, FTAG);
        return (space);
}

void
metaslab_class_evict_old(metaslab_class_t *mc, uint64_t txg)
{
        multilist_t *ml = &mc->mc_metaslab_txg_list;
        for (int i = 0; i < multilist_get_num_sublists(ml); i++) {
                multilist_sublist_t *mls = multilist_sublist_lock(ml, i);
                metaslab_t *msp = multilist_sublist_head(mls);
                multilist_sublist_unlock(mls);
                while (msp != NULL) {
                        mutex_enter(&msp->ms_lock);

                        /*
                         * If the metaslab has been removed from the list
                         * (which could happen if we were at the memory limit
                         * and it was evicted during this loop), then we can't
                         * proceed and we should restart the sublist.
                         */
                        if (!multilist_link_active(&msp->ms_class_txg_node)) {
                                mutex_exit(&msp->ms_lock);
                                i--;
                                break;
                        }
                        mls = multilist_sublist_lock(ml, i);
                        metaslab_t *next_msp = multilist_sublist_next(mls, msp);
                        multilist_sublist_unlock(mls);
                        if (txg >
                            msp->ms_selected_txg + metaslab_unload_delay &&
                            gethrtime() > msp->ms_selected_time +
                            (uint64_t)MSEC2NSEC(metaslab_unload_delay_ms)) {
                                metaslab_evict(msp, txg);
                        } else {
                                /*
                                 * Once we've hit a metaslab selected too
                                 * recently to evict, we're done evicting for
                                 * now.
                                 */
                                mutex_exit(&msp->ms_lock);
                                break;
                        }
                        mutex_exit(&msp->ms_lock);
                        msp = next_msp;
                }
        }
}

static int
metaslab_compare(const void *x1, const void *x2)
{
        const metaslab_t *m1 = (const metaslab_t *)x1;
        const metaslab_t *m2 = (const metaslab_t *)x2;

        int sort1 = 0;
        int sort2 = 0;
        if (m1->ms_allocator != -1 && m1->ms_primary)
                sort1 = 1;
        else if (m1->ms_allocator != -1 && !m1->ms_primary)
                sort1 = 2;
        if (m2->ms_allocator != -1 && m2->ms_primary)
                sort2 = 1;
        else if (m2->ms_allocator != -1 && !m2->ms_primary)
                sort2 = 2;

        /*
         * Sort inactive metaslabs first, then primaries, then secondaries. When
         * selecting a metaslab to allocate from, an allocator first tries its
         * primary, then secondary active metaslab. If it doesn't have active
         * metaslabs, or can't allocate from them, it searches for an inactive
         * metaslab to activate. If it can't find a suitable one, it will steal
         * a primary or secondary metaslab from another allocator.
         */
        if (sort1 < sort2)
                return (-1);
        if (sort1 > sort2)
                return (1);

        int cmp = TREE_CMP(m2->ms_weight, m1->ms_weight);
        if (likely(cmp))
                return (cmp);

        IMPLY(TREE_CMP(m1->ms_start, m2->ms_start) == 0, m1 == m2);

        return (TREE_CMP(m1->ms_start, m2->ms_start));
}

/*
 * ==========================================================================
 * Metaslab groups
 * ==========================================================================
 */
/*
 * Update the allocatable flag and the metaslab group's capacity.
 * The allocatable flag is set to true if the capacity is below
 * the zfs_mg_noalloc_threshold or has a fragmentation value that is
 * greater than zfs_mg_fragmentation_threshold. If a metaslab group
 * transitions from allocatable to non-allocatable or vice versa then the
 * metaslab group's class is updated to reflect the transition.
 */
static void
metaslab_group_alloc_update(metaslab_group_t *mg)
{
        vdev_t *vd = mg->mg_vd;
        metaslab_class_t *mc = mg->mg_class;
        vdev_stat_t *vs = &vd->vdev_stat;
        boolean_t was_allocatable;
        boolean_t was_initialized;

        ASSERT(vd == vd->vdev_top);
        ASSERT3U(spa_config_held(mc->mc_spa, SCL_ALLOC, RW_READER), ==,
            SCL_ALLOC);

        mutex_enter(&mg->mg_lock);
        was_allocatable = mg->mg_allocatable;
        was_initialized = mg->mg_initialized;

        mg->mg_free_capacity = ((vs->vs_space - vs->vs_alloc) * 100) /
            (vs->vs_space + 1);

        mutex_enter(&mc->mc_lock);

        /*
         * If the metaslab group was just added then it won't
         * have any space until we finish syncing out this txg.
         * At that point we will consider it initialized and available
         * for allocations.  We also don't consider non-activated
         * metaslab groups (e.g. vdevs that are in the middle of being removed)
         * to be initialized, because they can't be used for allocation.
         */
        mg->mg_initialized = metaslab_group_initialized(mg);
        if (!was_initialized && mg->mg_initialized) {
                mc->mc_groups++;
        } else if (was_initialized && !mg->mg_initialized) {
                ASSERT3U(mc->mc_groups, >, 0);
                mc->mc_groups--;
        }
        if (mg->mg_initialized)
                mg->mg_no_free_space = B_FALSE;

        /*
         * A metaslab group is considered allocatable if it has plenty
         * of free space or is not heavily fragmented. We only take
         * fragmentation into account if the metaslab group has a valid
         * fragmentation metric (i.e. a value between 0 and 100).
         */
        mg->mg_allocatable = (mg->mg_activation_count > 0 &&
            mg->mg_free_capacity > zfs_mg_noalloc_threshold &&
            (mg->mg_fragmentation == ZFS_FRAG_INVALID ||
            mg->mg_fragmentation <= zfs_mg_fragmentation_threshold));

        /*
         * The mc_alloc_groups maintains a count of the number of
         * groups in this metaslab class that are still above the
         * zfs_mg_noalloc_threshold. This is used by the allocating
         * threads to determine if they should avoid allocations to
         * a given group. The allocator will avoid allocations to a group
         * if that group has reached or is below the zfs_mg_noalloc_threshold
         * and there are still other groups that are above the threshold.
         * When a group transitions from allocatable to non-allocatable or
         * vice versa we update the metaslab class to reflect that change.
         * When the mc_alloc_groups value drops to 0 that means that all
         * groups have reached the zfs_mg_noalloc_threshold making all groups
         * eligible for allocations. This effectively means that all devices
         * are balanced again.
         */
        if (was_allocatable && !mg->mg_allocatable)
                mc->mc_alloc_groups--;
        else if (!was_allocatable && mg->mg_allocatable)
                mc->mc_alloc_groups++;
        mutex_exit(&mc->mc_lock);

        mutex_exit(&mg->mg_lock);
}

int
metaslab_sort_by_flushed(const void *va, const void *vb)
{
        const metaslab_t *a = va;
        const metaslab_t *b = vb;

        int cmp = TREE_CMP(a->ms_unflushed_txg, b->ms_unflushed_txg);
        if (likely(cmp))
                return (cmp);

        uint64_t a_vdev_id = a->ms_group->mg_vd->vdev_id;
        uint64_t b_vdev_id = b->ms_group->mg_vd->vdev_id;
        cmp = TREE_CMP(a_vdev_id, b_vdev_id);
        if (cmp)
                return (cmp);

        return (TREE_CMP(a->ms_id, b->ms_id));
}

metaslab_group_t *
metaslab_group_create(metaslab_class_t *mc, vdev_t *vd, int allocators)
{
        metaslab_group_t *mg;

        mg = kmem_zalloc(offsetof(metaslab_group_t,
            mg_allocator[allocators]), KM_SLEEP);
        mutex_init(&mg->mg_lock, NULL, MUTEX_DEFAULT, NULL);
        mutex_init(&mg->mg_ms_disabled_lock, NULL, MUTEX_DEFAULT, NULL);
        cv_init(&mg->mg_ms_disabled_cv, NULL, CV_DEFAULT, NULL);
        avl_create(&mg->mg_metaslab_tree, metaslab_compare,
            sizeof (metaslab_t), offsetof(metaslab_t, ms_group_node));
        mg->mg_vd = vd;
        mg->mg_class = mc;
        mg->mg_activation_count = 0;
        mg->mg_initialized = B_FALSE;
        mg->mg_no_free_space = B_TRUE;
        mg->mg_allocators = allocators;

        for (int i = 0; i < allocators; i++) {
                metaslab_group_allocator_t *mga = &mg->mg_allocator[i];
                zfs_refcount_create_tracked(&mga->mga_alloc_queue_depth);
        }

        mg->mg_taskq = taskq_create("metaslab_group_taskq", metaslab_load_pct,
            maxclsyspri, 10, INT_MAX, TASKQ_THREADS_CPU_PCT | TASKQ_DYNAMIC);

        return (mg);
}

void
metaslab_group_destroy(metaslab_group_t *mg)
{
        ASSERT(mg->mg_prev == NULL);
        ASSERT(mg->mg_next == NULL);
        /*
         * We may have gone below zero with the activation count
         * either because we never activated in the first place or
         * because we're done, and possibly removing the vdev.
         */
        ASSERT(mg->mg_activation_count <= 0);

        taskq_destroy(mg->mg_taskq);
        avl_destroy(&mg->mg_metaslab_tree);
        mutex_destroy(&mg->mg_lock);
        mutex_destroy(&mg->mg_ms_disabled_lock);
        cv_destroy(&mg->mg_ms_disabled_cv);

        for (int i = 0; i < mg->mg_allocators; i++) {
                metaslab_group_allocator_t *mga = &mg->mg_allocator[i];
                zfs_refcount_destroy(&mga->mga_alloc_queue_depth);
        }
        kmem_free(mg, offsetof(metaslab_group_t,
            mg_allocator[mg->mg_allocators]));
}

void
metaslab_group_activate(metaslab_group_t *mg)
{
        metaslab_class_t *mc = mg->mg_class;
        spa_t *spa = mc->mc_spa;
        metaslab_group_t *mgprev, *mgnext;

        ASSERT3U(spa_config_held(spa, SCL_ALLOC, RW_WRITER), !=, 0);

        ASSERT(mg->mg_prev == NULL);
        ASSERT(mg->mg_next == NULL);
        ASSERT(mg->mg_activation_count <= 0);

        if (++mg->mg_activation_count <= 0)
                return;

        mg->mg_aliquot = metaslab_aliquot * MAX(1,
            vdev_get_ndisks(mg->mg_vd) - vdev_get_nparity(mg->mg_vd));
        metaslab_group_alloc_update(mg);

        if ((mgprev = mc->mc_allocator[0].mca_rotor) == NULL) {
                mg->mg_prev = mg;
                mg->mg_next = mg;
        } else {
                mgnext = mgprev->mg_next;
                mg->mg_prev = mgprev;
                mg->mg_next = mgnext;
                mgprev->mg_next = mg;
                mgnext->mg_prev = mg;
        }
        for (int i = 0; i < spa->spa_alloc_count; i++) {
                mc->mc_allocator[i].mca_rotor = mg;
                mg = mg->mg_next;
        }
}

/*
 * Passivate a metaslab group and remove it from the allocation rotor.
 * Callers must hold both the SCL_ALLOC and SCL_ZIO lock prior to passivating
 * a metaslab group. This function will momentarily drop spa_config_locks
 * that are lower than the SCL_ALLOC lock (see comment below).
 */
void
metaslab_group_passivate(metaslab_group_t *mg)
{
        metaslab_class_t *mc = mg->mg_class;
        spa_t *spa = mc->mc_spa;
        metaslab_group_t *mgprev, *mgnext;
        int locks = spa_config_held(spa, SCL_ALL, RW_WRITER);

        ASSERT3U(spa_config_held(spa, SCL_ALLOC | SCL_ZIO, RW_WRITER), ==,
            (SCL_ALLOC | SCL_ZIO));

        if (--mg->mg_activation_count != 0) {
                for (int i = 0; i < spa->spa_alloc_count; i++)
                        ASSERT(mc->mc_allocator[i].mca_rotor != mg);
                ASSERT(mg->mg_prev == NULL);
                ASSERT(mg->mg_next == NULL);
                ASSERT(mg->mg_activation_count < 0);
                return;
        }

        /*
         * The spa_config_lock is an array of rwlocks, ordered as
         * follows (from highest to lowest):
         *      SCL_CONFIG > SCL_STATE > SCL_L2ARC > SCL_ALLOC >
         *      SCL_ZIO > SCL_FREE > SCL_VDEV
         * (For more information about the spa_config_lock see spa_misc.c)
         * The higher the lock, the broader its coverage. When we passivate
         * a metaslab group, we must hold both the SCL_ALLOC and the SCL_ZIO
         * config locks. However, the metaslab group's taskq might be trying
         * to preload metaslabs so we must drop the SCL_ZIO lock and any
         * lower locks to allow the I/O to complete. At a minimum,
         * we continue to hold the SCL_ALLOC lock, which prevents any future
         * allocations from taking place and any changes to the vdev tree.
         */
        spa_config_exit(spa, locks & ~(SCL_ZIO - 1), spa);
        taskq_wait_outstanding(mg->mg_taskq, 0);
        spa_config_enter(spa, locks & ~(SCL_ZIO - 1), spa, RW_WRITER);
        metaslab_group_alloc_update(mg);
        for (int i = 0; i < mg->mg_allocators; i++) {
                metaslab_group_allocator_t *mga = &mg->mg_allocator[i];
                metaslab_t *msp = mga->mga_primary;
                if (msp != NULL) {
                        mutex_enter(&msp->ms_lock);
                        metaslab_passivate(msp,
                            metaslab_weight_from_range_tree(msp));
                        mutex_exit(&msp->ms_lock);
                }
                msp = mga->mga_secondary;
                if (msp != NULL) {
                        mutex_enter(&msp->ms_lock);
                        metaslab_passivate(msp,
                            metaslab_weight_from_range_tree(msp));
                        mutex_exit(&msp->ms_lock);
                }
        }

        mgprev = mg->mg_prev;
        mgnext = mg->mg_next;

        if (mg == mgnext) {
                mgnext = NULL;
        } else {
                mgprev->mg_next = mgnext;
                mgnext->mg_prev = mgprev;
        }
        for (int i = 0; i < spa->spa_alloc_count; i++) {
                if (mc->mc_allocator[i].mca_rotor == mg)
                        mc->mc_allocator[i].mca_rotor = mgnext;
        }

        mg->mg_prev = NULL;
        mg->mg_next = NULL;
}

boolean_t
metaslab_group_initialized(metaslab_group_t *mg)
{
        vdev_t *vd = mg->mg_vd;
        vdev_stat_t *vs = &vd->vdev_stat;

        return (vs->vs_space != 0 && mg->mg_activation_count > 0);
}

uint64_t
metaslab_group_get_space(metaslab_group_t *mg)
{
        /*
         * Note that the number of nodes in mg_metaslab_tree may be one less
         * than vdev_ms_count, due to the embedded log metaslab.
         */
        mutex_enter(&mg->mg_lock);
        uint64_t ms_count = avl_numnodes(&mg->mg_metaslab_tree);
        mutex_exit(&mg->mg_lock);
        return ((1ULL << mg->mg_vd->vdev_ms_shift) * ms_count);
}

void
metaslab_group_histogram_verify(metaslab_group_t *mg)
{
        uint64_t *mg_hist;
        avl_tree_t *t = &mg->mg_metaslab_tree;
        uint64_t ashift = mg->mg_vd->vdev_ashift;

        if ((zfs_flags & ZFS_DEBUG_HISTOGRAM_VERIFY) == 0)
                return;

        mg_hist = kmem_zalloc(sizeof (uint64_t) * RANGE_TREE_HISTOGRAM_SIZE,
            KM_SLEEP);

        ASSERT3U(RANGE_TREE_HISTOGRAM_SIZE, >=,
            SPACE_MAP_HISTOGRAM_SIZE + ashift);

        mutex_enter(&mg->mg_lock);
        for (metaslab_t *msp = avl_first(t);
            msp != NULL; msp = AVL_NEXT(t, msp)) {
                VERIFY3P(msp->ms_group, ==, mg);
                /* skip if not active */
                if (msp->ms_sm == NULL)
                        continue;

                for (int i = 0; i < SPACE_MAP_HISTOGRAM_SIZE; i++) {
                        mg_hist[i + ashift] +=
                            msp->ms_sm->sm_phys->smp_histogram[i];
                }
        }

        for (int i = 0; i < RANGE_TREE_HISTOGRAM_SIZE; i ++)
                VERIFY3U(mg_hist[i], ==, mg->mg_histogram[i]);

        mutex_exit(&mg->mg_lock);

        kmem_free(mg_hist, sizeof (uint64_t) * RANGE_TREE_HISTOGRAM_SIZE);
}

static void
metaslab_group_histogram_add(metaslab_group_t *mg, metaslab_t *msp)
{
        metaslab_class_t *mc = mg->mg_class;
        uint64_t ashift = mg->mg_vd->vdev_ashift;

        ASSERT(MUTEX_HELD(&msp->ms_lock));
        if (msp->ms_sm == NULL)
                return;

        mutex_enter(&mg->mg_lock);
        mutex_enter(&mc->mc_lock);
        for (int i = 0; i < SPACE_MAP_HISTOGRAM_SIZE; i++) {
                IMPLY(mg == mg->mg_vd->vdev_log_mg,
                    mc == spa_embedded_log_class(mg->mg_vd->vdev_spa));
                mg->mg_histogram[i + ashift] +=
                    msp->ms_sm->sm_phys->smp_histogram[i];
                mc->mc_histogram[i + ashift] +=
                    msp->ms_sm->sm_phys->smp_histogram[i];
        }
        mutex_exit(&mc->mc_lock);
        mutex_exit(&mg->mg_lock);
}

void
metaslab_group_histogram_remove(metaslab_group_t *mg, metaslab_t *msp)
{
        metaslab_class_t *mc = mg->mg_class;
        uint64_t ashift = mg->mg_vd->vdev_ashift;

        ASSERT(MUTEX_HELD(&msp->ms_lock));
        if (msp->ms_sm == NULL)
                return;

        mutex_enter(&mg->mg_lock);
        mutex_enter(&mc->mc_lock);
        for (int i = 0; i < SPACE_MAP_HISTOGRAM_SIZE; i++) {
                ASSERT3U(mg->mg_histogram[i + ashift], >=,
                    msp->ms_sm->sm_phys->smp_histogram[i]);
                ASSERT3U(mc->mc_histogram[i + ashift], >=,
                    msp->ms_sm->sm_phys->smp_histogram[i]);
                IMPLY(mg == mg->mg_vd->vdev_log_mg,
                    mc == spa_embedded_log_class(mg->mg_vd->vdev_spa));

                mg->mg_histogram[i + ashift] -=
                    msp->ms_sm->sm_phys->smp_histogram[i];
                mc->mc_histogram[i + ashift] -=
                    msp->ms_sm->sm_phys->smp_histogram[i];
        }
        mutex_exit(&mc->mc_lock);
        mutex_exit(&mg->mg_lock);
}

static void
metaslab_group_add(metaslab_group_t *mg, metaslab_t *msp)
{
        ASSERT(msp->ms_group == NULL);
        mutex_enter(&mg->mg_lock);
        msp->ms_group = mg;
        msp->ms_weight = 0;
        avl_add(&mg->mg_metaslab_tree, msp);
        mutex_exit(&mg->mg_lock);

        mutex_enter(&msp->ms_lock);
        metaslab_group_histogram_add(mg, msp);
        mutex_exit(&msp->ms_lock);
}

static void
metaslab_group_remove(metaslab_group_t *mg, metaslab_t *msp)
{
        mutex_enter(&msp->ms_lock);
        metaslab_group_histogram_remove(mg, msp);
        mutex_exit(&msp->ms_lock);

        mutex_enter(&mg->mg_lock);
        ASSERT(msp->ms_group == mg);
        avl_remove(&mg->mg_metaslab_tree, msp);

        metaslab_class_t *mc = msp->ms_group->mg_class;
        multilist_sublist_t *mls =
            multilist_sublist_lock_obj(&mc->mc_metaslab_txg_list, msp);
        if (multilist_link_active(&msp->ms_class_txg_node))
                multilist_sublist_remove(mls, msp);
        multilist_sublist_unlock(mls);

        msp->ms_group = NULL;
        mutex_exit(&mg->mg_lock);
}

static void
metaslab_group_sort_impl(metaslab_group_t *mg, metaslab_t *msp, uint64_t weight)
{
        ASSERT(MUTEX_HELD(&msp->ms_lock));
        ASSERT(MUTEX_HELD(&mg->mg_lock));
        ASSERT(msp->ms_group == mg);

        avl_remove(&mg->mg_metaslab_tree, msp);
        msp->ms_weight = weight;
        avl_add(&mg->mg_metaslab_tree, msp);

}

static void
metaslab_group_sort(metaslab_group_t *mg, metaslab_t *msp, uint64_t weight)
{
        /*
         * Although in principle the weight can be any value, in
         * practice we do not use values in the range [1, 511].
         */
        ASSERT(weight >= SPA_MINBLOCKSIZE || weight == 0);
        ASSERT(MUTEX_HELD(&msp->ms_lock));

        mutex_enter(&mg->mg_lock);
        metaslab_group_sort_impl(mg, msp, weight);
        mutex_exit(&mg->mg_lock);
}

/*
 * Calculate the fragmentation for a given metaslab group. We can use
 * a simple average here since all metaslabs within the group must have
 * the same size. The return value will be a value between 0 and 100
 * (inclusive), or ZFS_FRAG_INVALID if less than half of the metaslab in this
 * group have a fragmentation metric.
 */
uint64_t
metaslab_group_fragmentation(metaslab_group_t *mg)
{
        vdev_t *vd = mg->mg_vd;
        uint64_t fragmentation = 0;
        uint64_t valid_ms = 0;

        for (int m = 0; m < vd->vdev_ms_count; m++) {
                metaslab_t *msp = vd->vdev_ms[m];

                if (msp->ms_fragmentation == ZFS_FRAG_INVALID)
                        continue;
                if (msp->ms_group != mg)
                        continue;

                valid_ms++;
                fragmentation += msp->ms_fragmentation;
        }

        if (valid_ms <= mg->mg_vd->vdev_ms_count / 2)
                return (ZFS_FRAG_INVALID);

        fragmentation /= valid_ms;
        ASSERT3U(fragmentation, <=, 100);
        return (fragmentation);
}

/*
 * Determine if a given metaslab group should skip allocations. A metaslab
 * group should avoid allocations if its free capacity is less than the
 * zfs_mg_noalloc_threshold or its fragmentation metric is greater than
 * zfs_mg_fragmentation_threshold and there is at least one metaslab group
 * that can still handle allocations. If the allocation throttle is enabled
 * then we skip allocations to devices that have reached their maximum
 * allocation queue depth unless the selected metaslab group is the only
 * eligible group remaining.
 */
static boolean_t
metaslab_group_allocatable(metaslab_group_t *mg, metaslab_group_t *rotor,
    int flags, uint64_t psize, int allocator, int d)
{
        spa_t *spa = mg->mg_vd->vdev_spa;
        metaslab_class_t *mc = mg->mg_class;

        /*
         * We can only consider skipping this metaslab group if it's
         * in the normal metaslab class and there are other metaslab
         * groups to select from. Otherwise, we always consider it eligible
         * for allocations.
         */
        if ((mc != spa_normal_class(spa) &&
            mc != spa_special_class(spa) &&
            mc != spa_dedup_class(spa)) ||
            mc->mc_groups <= 1)
                return (B_TRUE);

        /*
         * If the metaslab group's mg_allocatable flag is set (see comments
         * in metaslab_group_alloc_update() for more information) and
         * the allocation throttle is disabled then allow allocations to this
         * device. However, if the allocation throttle is enabled then
         * check if we have reached our allocation limit (mga_alloc_queue_depth)
         * to determine if we should allow allocations to this metaslab group.
         * If all metaslab groups are no longer considered allocatable
         * (mc_alloc_groups == 0) or we're trying to allocate the smallest
         * gang block size then we allow allocations on this metaslab group
         * regardless of the mg_allocatable or throttle settings.
         */
        if (mg->mg_allocatable) {
                metaslab_group_allocator_t *mga = &mg->mg_allocator[allocator];
                int64_t qdepth;
                uint64_t qmax = mga->mga_cur_max_alloc_queue_depth;

                if (!mc->mc_alloc_throttle_enabled)
                        return (B_TRUE);

                /*
                 * If this metaslab group does not have any free space, then
                 * there is no point in looking further.
                 */
                if (mg->mg_no_free_space)
                        return (B_FALSE);

                /*
                 * Some allocations (e.g., those coming from device removal
                 * where the * allocations are not even counted in the
                 * metaslab * allocation queues) are allowed to bypass
                 * the throttle.
                 */
                if (flags & METASLAB_DONT_THROTTLE)
                        return (B_TRUE);

                /*
                 * Relax allocation throttling for ditto blocks.  Due to
                 * random imbalances in allocation it tends to push copies
                 * to one vdev, that looks a bit better at the moment.
                 */
                qmax = qmax * (4 + d) / 4;

                qdepth = zfs_refcount_count(&mga->mga_alloc_queue_depth);

                /*
                 * If this metaslab group is below its qmax or it's
                 * the only allocatable metasable group, then attempt
                 * to allocate from it.
                 */
                if (qdepth < qmax || mc->mc_alloc_groups == 1)
                        return (B_TRUE);
                ASSERT3U(mc->mc_alloc_groups, >, 1);

                /*
                 * Since this metaslab group is at or over its qmax, we
                 * need to determine if there are metaslab groups after this
                 * one that might be able to handle this allocation. This is
                 * racy since we can't hold the locks for all metaslab
                 * groups at the same time when we make this check.
                 */
                for (metaslab_group_t *mgp = mg->mg_next;
                    mgp != rotor; mgp = mgp->mg_next) {
                        metaslab_group_allocator_t *mgap =
                            &mgp->mg_allocator[allocator];
                        qmax = mgap->mga_cur_max_alloc_queue_depth;
                        qmax = qmax * (4 + d) / 4;
                        qdepth =
                            zfs_refcount_count(&mgap->mga_alloc_queue_depth);

                        /*
                         * If there is another metaslab group that
                         * might be able to handle the allocation, then
                         * we return false so that we skip this group.
                         */
                        if (qdepth < qmax && !mgp->mg_no_free_space)
                                return (B_FALSE);
                }

                /*
                 * We didn't find another group to handle the allocation
                 * so we can't skip this metaslab group even though
                 * we are at or over our qmax.
                 */
                return (B_TRUE);

        } else if (mc->mc_alloc_groups == 0 || psize == SPA_MINBLOCKSIZE) {
                return (B_TRUE);
        }
        return (B_FALSE);
}

/*
 * ==========================================================================
 * Range tree callbacks
 * ==========================================================================
 */

/*
 * Comparison function for the private size-ordered tree using 32-bit
 * ranges. Tree is sorted by size, larger sizes at the end of the tree.
 */
__attribute__((always_inline)) inline
static int
metaslab_rangesize32_compare(const void *x1, const void *x2)
{
        const range_seg32_t *r1 = x1;
        const range_seg32_t *r2 = x2;

        uint64_t rs_size1 = r1->rs_end - r1->rs_start;
        uint64_t rs_size2 = r2->rs_end - r2->rs_start;

        int cmp = TREE_CMP(rs_size1, rs_size2);

        return (cmp + !cmp * TREE_CMP(r1->rs_start, r2->rs_start));
}

/*
 * Comparison function for the private size-ordered tree using 64-bit
 * ranges. Tree is sorted by size, larger sizes at the end of the tree.
 */
__attribute__((always_inline)) inline
static int
metaslab_rangesize64_compare(const void *x1, const void *x2)
{
        const range_seg64_t *r1 = x1;
        const range_seg64_t *r2 = x2;

        uint64_t rs_size1 = r1->rs_end - r1->rs_start;
        uint64_t rs_size2 = r2->rs_end - r2->rs_start;

        int cmp = TREE_CMP(rs_size1, rs_size2);

        return (cmp + !cmp * TREE_CMP(r1->rs_start, r2->rs_start));
}

typedef struct metaslab_rt_arg {
        zfs_btree_t *mra_bt;
        uint32_t mra_floor_shift;
} metaslab_rt_arg_t;

struct mssa_arg {
        range_tree_t *rt;
        metaslab_rt_arg_t *mra;
};

static void
metaslab_size_sorted_add(void *arg, uint64_t start, uint64_t size)
{
        struct mssa_arg *mssap = arg;
        range_tree_t *rt = mssap->rt;
        metaslab_rt_arg_t *mrap = mssap->mra;
        range_seg_max_t seg = {0};
        rs_set_start(&seg, rt, start);
        rs_set_end(&seg, rt, start + size);
        metaslab_rt_add(rt, &seg, mrap);
}

static void
metaslab_size_tree_full_load(range_tree_t *rt)
{
        metaslab_rt_arg_t *mrap = rt->rt_arg;
        METASLABSTAT_BUMP(metaslabstat_reload_tree);
        ASSERT0(zfs_btree_numnodes(mrap->mra_bt));
        mrap->mra_floor_shift = 0;
        struct mssa_arg arg = {0};
        arg.rt = rt;
        arg.mra = mrap;
        range_tree_walk(rt, metaslab_size_sorted_add, &arg);
}


ZFS_BTREE_FIND_IN_BUF_FUNC(metaslab_rt_find_rangesize32_in_buf,
    range_seg32_t, metaslab_rangesize32_compare)

ZFS_BTREE_FIND_IN_BUF_FUNC(metaslab_rt_find_rangesize64_in_buf,
    range_seg64_t, metaslab_rangesize64_compare)

/*
 * Create any block allocator specific components. The current allocators
 * rely on using both a size-ordered range_tree_t and an array of uint64_t's.
 */
static void
metaslab_rt_create(range_tree_t *rt, void *arg)
{
        metaslab_rt_arg_t *mrap = arg;
        zfs_btree_t *size_tree = mrap->mra_bt;

        size_t size;
        int (*compare) (const void *, const void *);
        bt_find_in_buf_f bt_find;
        switch (rt->rt_type) {
        case RANGE_SEG32:
                size = sizeof (range_seg32_t);
                compare = metaslab_rangesize32_compare;
                bt_find = metaslab_rt_find_rangesize32_in_buf;
                break;
        case RANGE_SEG64:
                size = sizeof (range_seg64_t);
                compare = metaslab_rangesize64_compare;
                bt_find = metaslab_rt_find_rangesize64_in_buf;
                break;
        default:
                panic("Invalid range seg type %d", rt->rt_type);
        }
        zfs_btree_create(size_tree, compare, bt_find, size);
        mrap->mra_floor_shift = metaslab_by_size_min_shift;
}

static void
metaslab_rt_destroy(range_tree_t *rt, void *arg)
{
        (void) rt;
        metaslab_rt_arg_t *mrap = arg;
        zfs_btree_t *size_tree = mrap->mra_bt;

        zfs_btree_destroy(size_tree);
        kmem_free(mrap, sizeof (*mrap));
}

static void
metaslab_rt_add(range_tree_t *rt, range_seg_t *rs, void *arg)
{
        metaslab_rt_arg_t *mrap = arg;
        zfs_btree_t *size_tree = mrap->mra_bt;

        if (rs_get_end(rs, rt) - rs_get_start(rs, rt) <
            (1ULL << mrap->mra_floor_shift))
                return;

        zfs_btree_add(size_tree, rs);
}

static void
metaslab_rt_remove(range_tree_t *rt, range_seg_t *rs, void *arg)
{
        metaslab_rt_arg_t *mrap = arg;
        zfs_btree_t *size_tree = mrap->mra_bt;

        if (rs_get_end(rs, rt) - rs_get_start(rs, rt) < (1ULL <<
            mrap->mra_floor_shift))
                return;

        zfs_btree_remove(size_tree, rs);
}

static void
metaslab_rt_vacate(range_tree_t *rt, void *arg)
{
        metaslab_rt_arg_t *mrap = arg;
        zfs_btree_t *size_tree = mrap->mra_bt;
        zfs_btree_clear(size_tree);
        zfs_btree_destroy(size_tree);

        metaslab_rt_create(rt, arg);
}

static const range_tree_ops_t metaslab_rt_ops = {
        .rtop_create = metaslab_rt_create,
        .rtop_destroy = metaslab_rt_destroy,
        .rtop_add = metaslab_rt_add,
        .rtop_remove = metaslab_rt_remove,
        .rtop_vacate = metaslab_rt_vacate
};

/*
 * ==========================================================================
 * Common allocator routines
 * ==========================================================================
 */

/*
 * Return the maximum contiguous segment within the metaslab.
 */
uint64_t
metaslab_largest_allocatable(metaslab_t *msp)
{
        zfs_btree_t *t = &msp->ms_allocatable_by_size;
        range_seg_t *rs;

        if (t == NULL)
                return (0);
        if (zfs_btree_numnodes(t) == 0)
                metaslab_size_tree_full_load(msp->ms_allocatable);

        rs = zfs_btree_last(t, NULL);
        if (rs == NULL)
                return (0);

        return (rs_get_end(rs, msp->ms_allocatable) - rs_get_start(rs,
            msp->ms_allocatable));
}

/*
 * Return the maximum contiguous segment within the unflushed frees of this
 * metaslab.
 */
static uint64_t
metaslab_largest_unflushed_free(metaslab_t *msp)
{
        ASSERT(MUTEX_HELD(&msp->ms_lock));

        if (msp->ms_unflushed_frees == NULL)
                return (0);

        if (zfs_btree_numnodes(&msp->ms_unflushed_frees_by_size) == 0)
                metaslab_size_tree_full_load(msp->ms_unflushed_frees);
        range_seg_t *rs = zfs_btree_last(&msp->ms_unflushed_frees_by_size,
            NULL);
        if (rs == NULL)
                return (0);

        /*
         * When a range is freed from the metaslab, that range is added to
         * both the unflushed frees and the deferred frees. While the block
         * will eventually be usable, if the metaslab were loaded the range
         * would not be added to the ms_allocatable tree until TXG_DEFER_SIZE
         * txgs had passed.  As a result, when attempting to estimate an upper
         * bound for the largest currently-usable free segment in the
         * metaslab, we need to not consider any ranges currently in the defer
         * trees. This algorithm approximates the largest available chunk in
         * the largest range in the unflushed_frees tree by taking the first
         * chunk.  While this may be a poor estimate, it should only remain so
         * briefly and should eventually self-correct as frees are no longer
         * deferred. Similar logic applies to the ms_freed tree. See
         * metaslab_load() for more details.
         *
         * There are two primary sources of inaccuracy in this estimate. Both
         * are tolerated for performance reasons. The first source is that we
         * only check the largest segment for overlaps. Smaller segments may
         * have more favorable overlaps with the other trees, resulting in
         * larger usable chunks.  Second, we only look at the first chunk in
         * the largest segment; there may be other usable chunks in the
         * largest segment, but we ignore them.
         */
        uint64_t rstart = rs_get_start(rs, msp->ms_unflushed_frees);
        uint64_t rsize = rs_get_end(rs, msp->ms_unflushed_frees) - rstart;
        for (int t = 0; t < TXG_DEFER_SIZE; t++) {
                uint64_t start = 0;
                uint64_t size = 0;
                boolean_t found = range_tree_find_in(msp->ms_defer[t], rstart,
                    rsize, &start, &size);
                if (found) {
                        if (rstart == start)
                                return (0);
                        rsize = start - rstart;
                }
        }

        uint64_t start = 0;
        uint64_t size = 0;
        boolean_t found = range_tree_find_in(msp->ms_freed, rstart,
            rsize, &start, &size);
        if (found)
                rsize = start - rstart;

        return (rsize);
}

static range_seg_t *
metaslab_block_find(zfs_btree_t *t, range_tree_t *rt, uint64_t start,
    uint64_t size, zfs_btree_index_t *where)
{
        range_seg_t *rs;
        range_seg_max_t rsearch;

        rs_set_start(&rsearch, rt, start);
        rs_set_end(&rsearch, rt, start + size);

        rs = zfs_btree_find(t, &rsearch, where);
        if (rs == NULL) {
                rs = zfs_btree_next(t, where, where);
        }

        return (rs);
}

#if defined(WITH_DF_BLOCK_ALLOCATOR) || \
    defined(WITH_CF_BLOCK_ALLOCATOR)

/*
 * This is a helper function that can be used by the allocator to find a
 * suitable block to allocate. This will search the specified B-tree looking
 * for a block that matches the specified criteria.
 */
static uint64_t
metaslab_block_picker(range_tree_t *rt, uint64_t *cursor, uint64_t size,
    uint64_t max_search)
{
        if (*cursor == 0)
                *cursor = rt->rt_start;
        zfs_btree_t *bt = &rt->rt_root;
        zfs_btree_index_t where;
        range_seg_t *rs = metaslab_block_find(bt, rt, *cursor, size, &where);
        uint64_t first_found;
        int count_searched = 0;

        if (rs != NULL)
                first_found = rs_get_start(rs, rt);

        while (rs != NULL && (rs_get_start(rs, rt) - first_found <=
            max_search || count_searched < metaslab_min_search_count)) {
                uint64_t offset = rs_get_start(rs, rt);
                if (offset + size <= rs_get_end(rs, rt)) {
                        *cursor = offset + size;
                        return (offset);
                }
                rs = zfs_btree_next(bt, &where, &where);
                count_searched++;
        }

        *cursor = 0;
        return (-1ULL);
}
#endif /* WITH_DF/CF_BLOCK_ALLOCATOR */

#if defined(WITH_DF_BLOCK_ALLOCATOR)
/*
 * ==========================================================================
 * Dynamic Fit (df) block allocator
 *
 * Search for a free chunk of at least this size, starting from the last
 * offset (for this alignment of block) looking for up to
 * metaslab_df_max_search bytes (16MB).  If a large enough free chunk is not
 * found within 16MB, then return a free chunk of exactly the requested size (or
 * larger).
 *
 * If it seems like searching from the last offset will be unproductive, skip
 * that and just return a free chunk of exactly the requested size (or larger).
 * This is based on metaslab_df_alloc_threshold and metaslab_df_free_pct.  This
 * mechanism is probably not very useful and may be removed in the future.
 *
 * The behavior when not searching can be changed to return the largest free
 * chunk, instead of a free chunk of exactly the requested size, by setting
 * metaslab_df_use_largest_segment.
 * ==========================================================================
 */
static uint64_t
metaslab_df_alloc(metaslab_t *msp, uint64_t size)
{
        /*
         * Find the largest power of 2 block size that evenly divides the
         * requested size. This is used to try to allocate blocks with similar
         * alignment from the same area of the metaslab (i.e. same cursor
         * bucket) but it does not guarantee that other allocations sizes
         * may exist in the same region.
         */
        uint64_t align = size & -size;
        uint64_t *cursor = &msp->ms_lbas[highbit64(align) - 1];
        range_tree_t *rt = msp->ms_allocatable;
        uint_t free_pct = range_tree_space(rt) * 100 / msp->ms_size;
        uint64_t offset;

        ASSERT(MUTEX_HELD(&msp->ms_lock));

        /*
         * If we're running low on space, find a segment based on size,
         * rather than iterating based on offset.
         */
        if (metaslab_largest_allocatable(msp) < metaslab_df_alloc_threshold ||
            free_pct < metaslab_df_free_pct) {
                offset = -1;
        } else {
                offset = metaslab_block_picker(rt,
                    cursor, size, metaslab_df_max_search);
        }

        if (offset == -1) {
                range_seg_t *rs;
                if (zfs_btree_numnodes(&msp->ms_allocatable_by_size) == 0)
                        metaslab_size_tree_full_load(msp->ms_allocatable);

                if (metaslab_df_use_largest_segment) {
                        /* use largest free segment */
                        rs = zfs_btree_last(&msp->ms_allocatable_by_size, NULL);
                } else {
                        zfs_btree_index_t where;
                        /* use segment of this size, or next largest */
                        rs = metaslab_block_find(&msp->ms_allocatable_by_size,
                            rt, msp->ms_start, size, &where);
                }
                if (rs != NULL && rs_get_start(rs, rt) + size <= rs_get_end(rs,
                    rt)) {
                        offset = rs_get_start(rs, rt);
                        *cursor = offset + size;
                }
        }

        return (offset);
}

const metaslab_ops_t zfs_metaslab_ops = {
        metaslab_df_alloc
};
#endif /* WITH_DF_BLOCK_ALLOCATOR */

#if defined(WITH_CF_BLOCK_ALLOCATOR)
/*
 * ==========================================================================
 * Cursor fit block allocator -
 * Select the largest region in the metaslab, set the cursor to the beginning
 * of the range and the cursor_end to the end of the range. As allocations
 * are made advance the cursor. Continue allocating from the cursor until
 * the range is exhausted and then find a new range.
 * ==========================================================================
 */
static uint64_t
metaslab_cf_alloc(metaslab_t *msp, uint64_t size)
{
        range_tree_t *rt = msp->ms_allocatable;
        zfs_btree_t *t = &msp->ms_allocatable_by_size;
        uint64_t *cursor = &msp->ms_lbas[0];
        uint64_t *cursor_end = &msp->ms_lbas[1];
        uint64_t offset = 0;

        ASSERT(MUTEX_HELD(&msp->ms_lock));

        ASSERT3U(*cursor_end, >=, *cursor);

        if ((*cursor + size) > *cursor_end) {
                range_seg_t *rs;

                if (zfs_btree_numnodes(t) == 0)
                        metaslab_size_tree_full_load(msp->ms_allocatable);
                rs = zfs_btree_last(t, NULL);
                if (rs == NULL || (rs_get_end(rs, rt) - rs_get_start(rs, rt)) <
                    size)
                        return (-1ULL);

                *cursor = rs_get_start(rs, rt);
                *cursor_end = rs_get_end(rs, rt);
        }

        offset = *cursor;
        *cursor += size;

        return (offset);
}

const metaslab_ops_t zfs_metaslab_ops = {
        metaslab_cf_alloc
};
#endif /* WITH_CF_BLOCK_ALLOCATOR */

#if defined(WITH_NDF_BLOCK_ALLOCATOR)
/*
 * ==========================================================================
 * New dynamic fit allocator -
 * Select a region that is large enough to allocate 2^metaslab_ndf_clump_shift
 * contiguous blocks. If no region is found then just use the largest segment
 * that remains.
 * ==========================================================================
 */

/*
 * Determines desired number of contiguous blocks (2^metaslab_ndf_clump_shift)
 * to request from the allocator.
 */
uint64_t metaslab_ndf_clump_shift = 4;

static uint64_t
metaslab_ndf_alloc(metaslab_t *msp, uint64_t size)
{
        zfs_btree_t *t = &msp->ms_allocatable->rt_root;
        range_tree_t *rt = msp->ms_allocatable;
        zfs_btree_index_t where;
        range_seg_t *rs;
        range_seg_max_t rsearch;
        uint64_t hbit = highbit64(size);
        uint64_t *cursor = &msp->ms_lbas[hbit - 1];
        uint64_t max_size = metaslab_largest_allocatable(msp);

        ASSERT(MUTEX_HELD(&msp->ms_lock));

        if (max_size < size)
                return (-1ULL);

        rs_set_start(&rsearch, rt, *cursor);
        rs_set_end(&rsearch, rt, *cursor + size);

        rs = zfs_btree_find(t, &rsearch, &where);
        if (rs == NULL || (rs_get_end(rs, rt) - rs_get_start(rs, rt)) < size) {
                t = &msp->ms_allocatable_by_size;

                rs_set_start(&rsearch, rt, 0);
                rs_set_end(&rsearch, rt, MIN(max_size, 1ULL << (hbit +
                    metaslab_ndf_clump_shift)));

                rs = zfs_btree_find(t, &rsearch, &where);
                if (rs == NULL)
                        rs = zfs_btree_next(t, &where, &where);
                ASSERT(rs != NULL);
        }

        if ((rs_get_end(rs, rt) - rs_get_start(rs, rt)) >= size) {
                *cursor = rs_get_start(rs, rt) + size;
                return (rs_get_start(rs, rt));
        }
        return (-1ULL);
}

const metaslab_ops_t zfs_metaslab_ops = {
        metaslab_ndf_alloc
};
#endif /* WITH_NDF_BLOCK_ALLOCATOR */


/*
 * ==========================================================================
 * Metaslabs
 * ==========================================================================
 */

/*
 * Wait for any in-progress metaslab loads to complete.
 */
static void
metaslab_load_wait(metaslab_t *msp)
{
        ASSERT(MUTEX_HELD(&msp->ms_lock));

        while (msp->ms_loading) {
                ASSERT(!msp->ms_loaded);
                cv_wait(&msp->ms_load_cv, &msp->ms_lock);
        }
}

/*
 * Wait for any in-progress flushing to complete.
 */
static void
metaslab_flush_wait(metaslab_t *msp)
{
        ASSERT(MUTEX_HELD(&msp->ms_lock));

        while (msp->ms_flushing)
                cv_wait(&msp->ms_flush_cv, &msp->ms_lock);
}

static unsigned int
metaslab_idx_func(multilist_t *ml, void *arg)
{
        metaslab_t *msp = arg;

        /*
         * ms_id values are allocated sequentially, so full 64bit
         * division would be a waste of time, so limit it to 32 bits.
         */
        return ((unsigned int)msp->ms_id % multilist_get_num_sublists(ml));
}

uint64_t
metaslab_allocated_space(metaslab_t *msp)
{
        return (msp->ms_allocated_space);
}

/*
 * Verify that the space accounting on disk matches the in-core range_trees.
 */
static void
metaslab_verify_space(metaslab_t *msp, uint64_t txg)
{
        spa_t *spa = msp->ms_group->mg_vd->vdev_spa;
        uint64_t allocating = 0;
        uint64_t sm_free_space, msp_free_space;

        ASSERT(MUTEX_HELD(&msp->ms_lock));
        ASSERT(!msp->ms_condensing);

        if ((zfs_flags & ZFS_DEBUG_METASLAB_VERIFY) == 0)
                return;

        /*
         * We can only verify the metaslab space when we're called
         * from syncing context with a loaded metaslab that has an
         * allocated space map. Calling this in non-syncing context
         * does not provide a consistent view of the metaslab since
         * we're performing allocations in the future.
         */
        if (txg != spa_syncing_txg(spa) || msp->ms_sm == NULL ||
            !msp->ms_loaded)
                return;

        /*
         * Even though the smp_alloc field can get negative,
         * when it comes to a metaslab's space map, that should
         * never be the case.
         */
        ASSERT3S(space_map_allocated(msp->ms_sm), >=, 0);

        ASSERT3U(space_map_allocated(msp->ms_sm), >=,
            range_tree_space(msp->ms_unflushed_frees));

        ASSERT3U(metaslab_allocated_space(msp), ==,
            space_map_allocated(msp->ms_sm) +
            range_tree_space(msp->ms_unflushed_allocs) -
            range_tree_space(msp->ms_unflushed_frees));

        sm_free_space = msp->ms_size - metaslab_allocated_space(msp);

        /*
         * Account for future allocations since we would have
         * already deducted that space from the ms_allocatable.
         */
        for (int t = 0; t < TXG_CONCURRENT_STATES; t++) {
                allocating +=
                    range_tree_space(msp->ms_allocating[(txg + t) & TXG_MASK]);
        }
        ASSERT3U(allocating + msp->ms_allocated_this_txg, ==,
            msp->ms_allocating_total);

        ASSERT3U(msp->ms_deferspace, ==,
            range_tree_space(msp->ms_defer[0]) +
            range_tree_space(msp->ms_defer[1]));

        msp_free_space = range_tree_space(msp->ms_allocatable) + allocating +
            msp->ms_deferspace + range_tree_space(msp->ms_freed);

        VERIFY3U(sm_free_space, ==, msp_free_space);
}

static void
metaslab_aux_histograms_clear(metaslab_t *msp)
{
        /*
         * Auxiliary histograms are only cleared when resetting them,
         * which can only happen while the metaslab is loaded.
         */
        ASSERT(msp->ms_loaded);

        memset(msp->ms_synchist, 0, sizeof (msp->ms_synchist));
        for (int t = 0; t < TXG_DEFER_SIZE; t++)
                memset(msp->ms_deferhist[t], 0, sizeof (msp->ms_deferhist[t]));
}

static void
metaslab_aux_histogram_add(uint64_t *histogram, uint64_t shift,
    range_tree_t *rt)
{
        /*
         * This is modeled after space_map_histogram_add(), so refer to that
         * function for implementation details. We want this to work like
         * the space map histogram, and not the range tree histogram, as we
         * are essentially constructing a delta that will be later subtracted
         * from the space map histogram.
         */
        int idx = 0;
        for (int i = shift; i < RANGE_TREE_HISTOGRAM_SIZE; i++) {
                ASSERT3U(i, >=, idx + shift);
                histogram[idx] += rt->rt_histogram[i] << (i - idx - shift);

                if (idx < SPACE_MAP_HISTOGRAM_SIZE - 1) {
                        ASSERT3U(idx + shift, ==, i);
                        idx++;
                        ASSERT3U(idx, <, SPACE_MAP_HISTOGRAM_SIZE);
                }
        }
}

/*
 * Called at every sync pass that the metaslab gets synced.
 *
 * The reason is that we want our auxiliary histograms to be updated
 * wherever the metaslab's space map histogram is updated. This way
 * we stay consistent on which parts of the metaslab space map's
 * histogram are currently not available for allocations (e.g because
 * they are in the defer, freed, and freeing trees).
 */
static void
metaslab_aux_histograms_update(metaslab_t *msp)
{
        space_map_t *sm = msp->ms_sm;
        ASSERT(sm != NULL);

        /*
         * This is similar to the metaslab's space map histogram updates
         * that take place in metaslab_sync(). The only difference is that
         * we only care about segments that haven't made it into the
         * ms_allocatable tree yet.
         */
        if (msp->ms_loaded) {
                metaslab_aux_histograms_clear(msp);

                metaslab_aux_histogram_add(msp->ms_synchist,
                    sm->sm_shift, msp->ms_freed);

                for (int t = 0; t < TXG_DEFER_SIZE; t++) {
                        metaslab_aux_histogram_add(msp->ms_deferhist[t],
                            sm->sm_shift, msp->ms_defer[t]);
                }
        }

        metaslab_aux_histogram_add(msp->ms_synchist,
            sm->sm_shift, msp->ms_freeing);
}

/*
 * Called every time we are done syncing (writing to) the metaslab,
 * i.e. at the end of each sync pass.
 * [see the comment in metaslab_impl.h for ms_synchist, ms_deferhist]
 */
static void
metaslab_aux_histograms_update_done(metaslab_t *msp, boolean_t defer_allowed)
{
        spa_t *spa = msp->ms_group->mg_vd->vdev_spa;
        space_map_t *sm = msp->ms_sm;

        if (sm == NULL) {
                /*
                 * We came here from metaslab_init() when creating/opening a
                 * pool, looking at a metaslab that hasn't had any allocations
                 * yet.
                 */
                return;
        }

        /*
         * This is similar to the actions that we take for the ms_freed
         * and ms_defer trees in metaslab_sync_done().
         */
        uint64_t hist_index = spa_syncing_txg(spa) % TXG_DEFER_SIZE;
        if (defer_allowed) {
                memcpy(msp->ms_deferhist[hist_index], msp->ms_synchist,
                    sizeof (msp->ms_synchist));
        } else {
                memset(msp->ms_deferhist[hist_index], 0,
                    sizeof (msp->ms_deferhist[hist_index]));
        }
        memset(msp->ms_synchist, 0, sizeof (msp->ms_synchist));
}

/*
 * Ensure that the metaslab's weight and fragmentation are consistent
 * with the contents of the histogram (either the range tree's histogram
 * or the space map's depending whether the metaslab is loaded).
 */
static void
metaslab_verify_weight_and_frag(metaslab_t *msp)
{
        ASSERT(MUTEX_HELD(&msp->ms_lock));

        if ((zfs_flags & ZFS_DEBUG_METASLAB_VERIFY) == 0)
                return;

        /*
         * We can end up here from vdev_remove_complete(), in which case we
         * cannot do these assertions because we hold spa config locks and
         * thus we are not allowed to read from the DMU.
         *
         * We check if the metaslab group has been removed and if that's
         * the case we return immediately as that would mean that we are
         * here from the aforementioned code path.
         */
        if (msp->ms_group == NULL)
                return;

        /*
         * Devices being removed always return a weight of 0 and leave
         * fragmentation and ms_max_size as is - there is nothing for
         * us to verify here.
         */
        vdev_t *vd = msp->ms_group->mg_vd;
        if (vd->vdev_removing)
                return;

        /*
         * If the metaslab is dirty it probably means that we've done
         * some allocations or frees that have changed our histograms
         * and thus the weight.
         */
        for (int t = 0; t < TXG_SIZE; t++) {
                if (txg_list_member(&vd->vdev_ms_list, msp, t))
                        return;
        }

        /*
         * This verification checks that our in-memory state is consistent
         * with what's on disk. If the pool is read-only then there aren't
         * any changes and we just have the initially-loaded state.
         */
        if (!spa_writeable(msp->ms_group->mg_vd->vdev_spa))
                return;

        /* some extra verification for in-core tree if you can */
        if (msp->ms_loaded) {
                range_tree_stat_verify(msp->ms_allocatable);
                VERIFY(space_map_histogram_verify(msp->ms_sm,
                    msp->ms_allocatable));
        }

        uint64_t weight = msp->ms_weight;
        uint64_t was_active = msp->ms_weight & METASLAB_ACTIVE_MASK;
        boolean_t space_based = WEIGHT_IS_SPACEBASED(msp->ms_weight);
        uint64_t frag = msp->ms_fragmentation;
        uint64_t max_segsize = msp->ms_max_size;

        msp->ms_weight = 0;
        msp->ms_fragmentation = 0;

        /*
         * This function is used for verification purposes and thus should
         * not introduce any side-effects/mutations on the system's state.
         *
         * Regardless of whether metaslab_weight() thinks this metaslab
         * should be active or not, we want to ensure that the actual weight
         * (and therefore the value of ms_weight) would be the same if it
         * was to be recalculated at this point.
         *
         * In addition we set the nodirty flag so metaslab_weight() does
         * not dirty the metaslab for future TXGs (e.g. when trying to
         * force condensing to upgrade the metaslab spacemaps).
         */
        msp->ms_weight = metaslab_weight(msp, B_TRUE) | was_active;

        VERIFY3U(max_segsize, ==, msp->ms_max_size);

        /*
         * If the weight type changed then there is no point in doing
         * verification. Revert fields to their original values.
         */
        if ((space_based && !WEIGHT_IS_SPACEBASED(msp->ms_weight)) ||
            (!space_based && WEIGHT_IS_SPACEBASED(msp->ms_weight))) {
                msp->ms_fragmentation = frag;
                msp->ms_weight = weight;
                return;
        }

        VERIFY3U(msp->ms_fragmentation, ==, frag);
        VERIFY3U(msp->ms_weight, ==, weight);
}

/*
 * If we're over the zfs_metaslab_mem_limit, select the loaded metaslab from
 * this class that was used longest ago, and attempt to unload it.  We don't
 * want to spend too much time in this loop to prevent performance
 * degradation, and we expect that most of the time this operation will
 * succeed. Between that and the normal unloading processing during txg sync,
 * we expect this to keep the metaslab memory usage under control.
 */
static void
metaslab_potentially_evict(metaslab_class_t *mc)
{
#ifdef _KERNEL
        uint64_t allmem = arc_all_memory();
        uint64_t inuse = spl_kmem_cache_inuse(zfs_btree_leaf_cache);
        uint64_t size = spl_kmem_cache_entry_size(zfs_btree_leaf_cache);
        uint_t tries = 0;
        for (; allmem * zfs_metaslab_mem_limit / 100 < inuse * size &&
            tries < multilist_get_num_sublists(&mc->mc_metaslab_txg_list) * 2;
            tries++) {
                unsigned int idx = multilist_get_random_index(
                    &mc->mc_metaslab_txg_list);
                multilist_sublist_t *mls =
                    multilist_sublist_lock(&mc->mc_metaslab_txg_list, idx);
                metaslab_t *msp = multilist_sublist_head(mls);
                multilist_sublist_unlock(mls);
                while (msp != NULL && allmem * zfs_metaslab_mem_limit / 100 <
                    inuse * size) {
                        VERIFY3P(mls, ==, multilist_sublist_lock(
                            &mc->mc_metaslab_txg_list, idx));
                        ASSERT3U(idx, ==,
                            metaslab_idx_func(&mc->mc_metaslab_txg_list, msp));

                        if (!multilist_link_active(&msp->ms_class_txg_node)) {
                                multilist_sublist_unlock(mls);
                                break;
                        }
                        metaslab_t *next_msp = multilist_sublist_next(mls, msp);
                        multilist_sublist_unlock(mls);
                        /*
                         * If the metaslab is currently loading there are two
                         * cases. If it's the metaslab we're evicting, we
                         * can't continue on or we'll panic when we attempt to
                         * recursively lock the mutex. If it's another
                         * metaslab that's loading, it can be safely skipped,
                         * since we know it's very new and therefore not a
                         * good eviction candidate. We check later once the
                         * lock is held that the metaslab is fully loaded
                         * before actually unloading it.
                         */
                        if (msp->ms_loading) {
                                msp = next_msp;
                                inuse =
                                    spl_kmem_cache_inuse(zfs_btree_leaf_cache);
                                continue;
                        }
                        /*
                         * We can't unload metaslabs with no spacemap because
                         * they're not ready to be unloaded yet. We can't
                         * unload metaslabs with outstanding allocations
                         * because doing so could cause the metaslab's weight
                         * to decrease while it's unloaded, which violates an
                         * invariant that we use to prevent unnecessary
                         * loading. We also don't unload metaslabs that are
                         * currently active because they are high-weight
                         * metaslabs that are likely to be used in the near
                         * future.
                         */
                        mutex_enter(&msp->ms_lock);
                        if (msp->ms_allocator == -1 && msp->ms_sm != NULL &&
                            msp->ms_allocating_total == 0) {
                                metaslab_unload(msp);
                        }
                        mutex_exit(&msp->ms_lock);
                        msp = next_msp;
                        inuse = spl_kmem_cache_inuse(zfs_btree_leaf_cache);
                }
        }
#else
        (void) mc, (void) zfs_metaslab_mem_limit;
#endif
}

static int
metaslab_load_impl(metaslab_t *msp)
{
        int error = 0;

        ASSERT(MUTEX_HELD(&msp->ms_lock));
        ASSERT(msp->ms_loading);
        ASSERT(!msp->ms_condensing);

        /*
         * We temporarily drop the lock to unblock other operations while we
         * are reading the space map. Therefore, metaslab_sync() and
         * metaslab_sync_done() can run at the same time as we do.
         *
         * If we are using the log space maps, metaslab_sync() can't write to
         * the metaslab's space map while we are loading as we only write to
         * it when we are flushing the metaslab, and that can't happen while
         * we are loading it.
         *
         * If we are not using log space maps though, metaslab_sync() can
         * append to the space map while we are loading. Therefore we load
         * only entries that existed when we started the load. Additionally,
         * metaslab_sync_done() has to wait for the load to complete because
         * there are potential races like metaslab_load() loading parts of the
         * space map that are currently being appended by metaslab_sync(). If
         * we didn't, the ms_allocatable would have entries that
         * metaslab_sync_done() would try to re-add later.
         *
         * That's why before dropping the lock we remember the synced length
         * of the metaslab and read up to that point of the space map,
         * ignoring entries appended by metaslab_sync() that happen after we
         * drop the lock.
         */
        uint64_t length = msp->ms_synced_length;
        mutex_exit(&msp->ms_lock);

        hrtime_t load_start = gethrtime();
        metaslab_rt_arg_t *mrap;
        if (msp->ms_allocatable->rt_arg == NULL) {
                mrap = kmem_zalloc(sizeof (*mrap), KM_SLEEP);
        } else {
                mrap = msp->ms_allocatable->rt_arg;
                msp->ms_allocatable->rt_ops = NULL;
                msp->ms_allocatable->rt_arg = NULL;
        }
        mrap->mra_bt = &msp->ms_allocatable_by_size;
        mrap->mra_floor_shift = metaslab_by_size_min_shift;

        if (msp->ms_sm != NULL) {
                error = space_map_load_length(msp->ms_sm, msp->ms_allocatable,
                    SM_FREE, length);

                /* Now, populate the size-sorted tree. */
                metaslab_rt_create(msp->ms_allocatable, mrap);
                msp->ms_allocatable->rt_ops = &metaslab_rt_ops;
                msp->ms_allocatable->rt_arg = mrap;

                struct mssa_arg arg = {0};
                arg.rt = msp->ms_allocatable;
                arg.mra = mrap;
                range_tree_walk(msp->ms_allocatable, metaslab_size_sorted_add,
                    &arg);
        } else {
                /*
                 * Add the size-sorted tree first, since we don't need to load
                 * the metaslab from the spacemap.
                 */
                metaslab_rt_create(msp->ms_allocatable, mrap);
                msp->ms_allocatable->rt_ops = &metaslab_rt_ops;
                msp->ms_allocatable->rt_arg = mrap;
                /*
                 * The space map has not been allocated yet, so treat
                 * all the space in the metaslab as free and add it to the
                 * ms_allocatable tree.
                 */
                range_tree_add(msp->ms_allocatable,
                    msp->ms_start, msp->ms_size);

                if (msp->ms_new) {
                        /*
                         * If the ms_sm doesn't exist, this means that this
                         * metaslab hasn't gone through metaslab_sync() and
                         * thus has never been dirtied. So we shouldn't
                         * expect any unflushed allocs or frees from previous
                         * TXGs.
                         */
                        ASSERT(range_tree_is_empty(msp->ms_unflushed_allocs));
                        ASSERT(range_tree_is_empty(msp->ms_unflushed_frees));
                }
        }

        /*
         * We need to grab the ms_sync_lock to prevent metaslab_sync() from
         * changing the ms_sm (or log_sm) and the metaslab's range trees
         * while we are about to use them and populate the ms_allocatable.
         * The ms_lock is insufficient for this because metaslab_sync() doesn't
         * hold the ms_lock while writing the ms_checkpointing tree to disk.
         */
        mutex_enter(&msp->ms_sync_lock);
        mutex_enter(&msp->ms_lock);

        ASSERT(!msp->ms_condensing);
        ASSERT(!msp->ms_flushing);

        if (error != 0) {
                mutex_exit(&msp->ms_sync_lock);
                return (error);
        }

        ASSERT3P(msp->ms_group, !=, NULL);
        msp->ms_loaded = B_TRUE;

        /*
         * Apply all the unflushed changes to ms_allocatable right
         * away so any manipulations we do below have a clear view
         * of what is allocated and what is free.
         */
        range_tree_walk(msp->ms_unflushed_allocs,
            range_tree_remove, msp->ms_allocatable);
        range_tree_walk(msp->ms_unflushed_frees,
            range_tree_add, msp->ms_allocatable);

        ASSERT3P(msp->ms_group, !=, NULL);
        spa_t *spa = msp->ms_group->mg_vd->vdev_spa;
        if (spa_syncing_log_sm(spa) != NULL) {
                ASSERT(spa_feature_is_enabled(spa,
                    SPA_FEATURE_LOG_SPACEMAP));

                /*
                 * If we use a log space map we add all the segments
                 * that are in ms_unflushed_frees so they are available
                 * for allocation.
                 *
                 * ms_allocatable needs to contain all free segments
                 * that are ready for allocations (thus not segments
                 * from ms_freeing, ms_freed, and the ms_defer trees).
                 * But if we grab the lock in this code path at a sync
                 * pass later that 1, then it also contains the
                 * segments of ms_freed (they were added to it earlier
                 * in this path through ms_unflushed_frees). So we
                 * need to remove all the segments that exist in
                 * ms_freed from ms_allocatable as they will be added
                 * later in metaslab_sync_done().
                 *
                 * When there's no log space map, the ms_allocatable
                 * correctly doesn't contain any segments that exist
                 * in ms_freed [see ms_synced_length].
                 */
                range_tree_walk(msp->ms_freed,
                    range_tree_remove, msp->ms_allocatable);
        }

        /*
         * If we are not using the log space map, ms_allocatable
         * contains the segments that exist in the ms_defer trees
         * [see ms_synced_length]. Thus we need to remove them
         * from ms_allocatable as they will be added again in
         * metaslab_sync_done().
         *
         * If we are using the log space map, ms_allocatable still
         * contains the segments that exist in the ms_defer trees.
         * Not because it read them through the ms_sm though. But
         * because these segments are part of ms_unflushed_frees
         * whose segments we add to ms_allocatable earlier in this
         * code path.
         */
        for (int t = 0; t < TXG_DEFER_SIZE; t++) {
                range_tree_walk(msp->ms_defer[t],
                    range_tree_remove, msp->ms_allocatable);
        }

        /*
         * Call metaslab_recalculate_weight_and_sort() now that the
         * metaslab is loaded so we get the metaslab's real weight.
         *
         * Unless this metaslab was created with older software and
         * has not yet been converted to use segment-based weight, we
         * expect the new weight to be better or equal to the weight
         * that the metaslab had while it was not loaded. This is
         * because the old weight does not take into account the
         * consolidation of adjacent segments between TXGs. [see
         * comment for ms_synchist and ms_deferhist[] for more info]
         */
        uint64_t weight = msp->ms_weight;
        uint64_t max_size = msp->ms_max_size;
        metaslab_recalculate_weight_and_sort(msp);
        if (!WEIGHT_IS_SPACEBASED(weight))
                ASSERT3U(weight, <=, msp->ms_weight);
        msp->ms_max_size = metaslab_largest_allocatable(msp);
        ASSERT3U(max_size, <=, msp->ms_max_size);
        hrtime_t load_end = gethrtime();
        msp->ms_load_time = load_end;
        zfs_dbgmsg("metaslab_load: txg %llu, spa %s, vdev_id %llu, "
            "ms_id %llu, smp_length %llu, "
            "unflushed_allocs %llu, unflushed_frees %llu, "
            "freed %llu, defer %llu + %llu, unloaded time %llu ms, "
            "loading_time %lld ms, ms_max_size %llu, "
            "max size error %lld, "
            "old_weight %llx, new_weight %llx",
            (u_longlong_t)spa_syncing_txg(spa), spa_name(spa),
            (u_longlong_t)msp->ms_group->mg_vd->vdev_id,
            (u_longlong_t)msp->ms_id,
            (u_longlong_t)space_map_length(msp->ms_sm),
            (u_longlong_t)range_tree_space(msp->ms_unflushed_allocs),
            (u_longlong_t)range_tree_space(msp->ms_unflushed_frees),
            (u_longlong_t)range_tree_space(msp->ms_freed),
            (u_longlong_t)range_tree_space(msp->ms_defer[0]),
            (u_longlong_t)range_tree_space(msp->ms_defer[1]),
            (longlong_t)((load_start - msp->ms_unload_time) / 1000000),
            (longlong_t)((load_end - load_start) / 1000000),
            (u_longlong_t)msp->ms_max_size,
            (u_longlong_t)msp->ms_max_size - max_size,
            (u_longlong_t)weight, (u_longlong_t)msp->ms_weight);

        metaslab_verify_space(msp, spa_syncing_txg(spa));
        mutex_exit(&msp->ms_sync_lock);
        return (0);
}

int
metaslab_load(metaslab_t *msp)
{
        ASSERT(MUTEX_HELD(&msp->ms_lock));

        /*
         * There may be another thread loading the same metaslab, if that's
         * the case just wait until the other thread is done and return.
         */
        metaslab_load_wait(msp);
        if (msp->ms_loaded)
                return (0);
        VERIFY(!msp->ms_loading);
        ASSERT(!msp->ms_condensing);

        /*
         * We set the loading flag BEFORE potentially dropping the lock to
         * wait for an ongoing flush (see ms_flushing below). This way other
         * threads know that there is already a thread that is loading this
         * metaslab.
         */
        msp->ms_loading = B_TRUE;

        /*
         * Wait for any in-progress flushing to finish as we drop the ms_lock
         * both here (during space_map_load()) and in metaslab_flush() (when
         * we flush our changes to the ms_sm).
         */
        if (msp->ms_flushing)
                metaslab_flush_wait(msp);

        /*
         * In the possibility that we were waiting for the metaslab to be
         * flushed (where we temporarily dropped the ms_lock), ensure that
         * no one else loaded the metaslab somehow.
         */
        ASSERT(!msp->ms_loaded);

        /*
         * If we're loading a metaslab in the normal class, consider evicting
         * another one to keep our memory usage under the limit defined by the
         * zfs_metaslab_mem_limit tunable.
         */
        if (spa_normal_class(msp->ms_group->mg_class->mc_spa) ==
            msp->ms_group->mg_class) {
                metaslab_potentially_evict(msp->ms_group->mg_class);
        }

        int error = metaslab_load_impl(msp);

        ASSERT(MUTEX_HELD(&msp->ms_lock));
        msp->ms_loading = B_FALSE;
        cv_broadcast(&msp->ms_load_cv);

        return (error);
}

void
metaslab_unload(metaslab_t *msp)
{
        ASSERT(MUTEX_HELD(&msp->ms_lock));

        /*
         * This can happen if a metaslab is selected for eviction (in
         * metaslab_potentially_evict) and then unloaded during spa_sync (via
         * metaslab_class_evict_old).
         */
        if (!msp->ms_loaded)
                return;

        range_tree_vacate(msp->ms_allocatable, NULL, NULL);
        msp->ms_loaded = B_FALSE;
        msp->ms_unload_time = gethrtime();

        msp->ms_activation_weight = 0;
        msp->ms_weight &= ~METASLAB_ACTIVE_MASK;

        if (msp->ms_group != NULL) {
                metaslab_class_t *mc = msp->ms_group->mg_class;
                multilist_sublist_t *mls =
                    multilist_sublist_lock_obj(&mc->mc_metaslab_txg_list, msp);
                if (multilist_link_active(&msp->ms_class_txg_node))
                        multilist_sublist_remove(mls, msp);
                multilist_sublist_unlock(mls);

                spa_t *spa = msp->ms_group->mg_vd->vdev_spa;
                zfs_dbgmsg("metaslab_unload: txg %llu, spa %s, vdev_id %llu, "
                    "ms_id %llu, weight %llx, "
                    "selected txg %llu (%llu ms ago), alloc_txg %llu, "
                    "loaded %llu ms ago, max_size %llu",
                    (u_longlong_t)spa_syncing_txg(spa), spa_name(spa),
                    (u_longlong_t)msp->ms_group->mg_vd->vdev_id,
                    (u_longlong_t)msp->ms_id,
                    (u_longlong_t)msp->ms_weight,
                    (u_longlong_t)msp->ms_selected_txg,
                    (u_longlong_t)(msp->ms_unload_time -
                    msp->ms_selected_time) / 1000 / 1000,
                    (u_longlong_t)msp->ms_alloc_txg,
                    (u_longlong_t)(msp->ms_unload_time -
                    msp->ms_load_time) / 1000 / 1000,
                    (u_longlong_t)msp->ms_max_size);
        }

        /*
         * We explicitly recalculate the metaslab's weight based on its space
         * map (as it is now not loaded). We want unload metaslabs to always
         * have their weights calculated from the space map histograms, while
         * loaded ones have it calculated from their in-core range tree
         * [see metaslab_load()]. This way, the weight reflects the information
         * available in-core, whether it is loaded or not.
         *
         * If ms_group == NULL means that we came here from metaslab_fini(),
         * at which point it doesn't make sense for us to do the recalculation
         * and the sorting.
         */
        if (msp->ms_group != NULL)
                metaslab_recalculate_weight_and_sort(msp);
}

/*
 * We want to optimize the memory use of the per-metaslab range
 * trees. To do this, we store the segments in the range trees in
 * units of sectors, zero-indexing from the start of the metaslab. If
 * the vdev_ms_shift - the vdev_ashift is less than 32, we can store
 * the ranges using two uint32_ts, rather than two uint64_ts.
 */
range_seg_type_t
metaslab_calculate_range_tree_type(vdev_t *vdev, metaslab_t *msp,
    uint64_t *start, uint64_t *shift)
{
        if (vdev->vdev_ms_shift - vdev->vdev_ashift < 32 &&
            !zfs_metaslab_force_large_segs) {
                *shift = vdev->vdev_ashift;
                *start = msp->ms_start;
                return (RANGE_SEG32);
        } else {
                *shift = 0;
                *start = 0;
                return (RANGE_SEG64);
        }
}

void
metaslab_set_selected_txg(metaslab_t *msp, uint64_t txg)
{
        ASSERT(MUTEX_HELD(&msp->ms_lock));
        metaslab_class_t *mc = msp->ms_group->mg_class;
        multilist_sublist_t *mls =
            multilist_sublist_lock_obj(&mc->mc_metaslab_txg_list, msp);
        if (multilist_link_active(&msp->ms_class_txg_node))
                multilist_sublist_remove(mls, msp);
        msp->ms_selected_txg = txg;
        msp->ms_selected_time = gethrtime();
        multilist_sublist_insert_tail(mls, msp);
        multilist_sublist_unlock(mls);
}

void
metaslab_space_update(vdev_t *vd, metaslab_class_t *mc, int64_t alloc_delta,
    int64_t defer_delta, int64_t space_delta)
{
        vdev_space_update(vd, alloc_delta, defer_delta, space_delta);

        ASSERT3P(vd->vdev_spa->spa_root_vdev, ==, vd->vdev_parent);
        ASSERT(vd->vdev_ms_count != 0);

        metaslab_class_space_update(mc, alloc_delta, defer_delta, space_delta,
            vdev_deflated_space(vd, space_delta));
}

int
metaslab_init(metaslab_group_t *mg, uint64_t id, uint64_t object,
    uint64_t txg, metaslab_t **msp)
{
        vdev_t *vd = mg->mg_vd;
        spa_t *spa = vd->vdev_spa;
        objset_t *mos = spa->spa_meta_objset;
        metaslab_t *ms;
        int error;

        ms = kmem_zalloc(sizeof (metaslab_t), KM_SLEEP);
        mutex_init(&ms->ms_lock, NULL, MUTEX_DEFAULT, NULL);
        mutex_init(&ms->ms_sync_lock, NULL, MUTEX_DEFAULT, NULL);
        cv_init(&ms->ms_load_cv, NULL, CV_DEFAULT, NULL);
        cv_init(&ms->ms_flush_cv, NULL, CV_DEFAULT, NULL);
        multilist_link_init(&ms->ms_class_txg_node);

        ms->ms_id = id;
        ms->ms_start = id << vd->vdev_ms_shift;
        ms->ms_size = 1ULL << vd->vdev_ms_shift;
        ms->ms_allocator = -1;
        ms->ms_new = B_TRUE;

        vdev_ops_t *ops = vd->vdev_ops;
        if (ops->vdev_op_metaslab_init != NULL)
                ops->vdev_op_metaslab_init(vd, &ms->ms_start, &ms->ms_size);

        /*
         * We only open space map objects that already exist. All others
         * will be opened when we finally allocate an object for it. For
         * readonly pools there is no need to open the space map object.
         *
         * Note:
         * When called from vdev_expand(), we can't call into the DMU as
         * we are holding the spa_config_lock as a writer and we would
         * deadlock [see relevant comment in vdev_metaslab_init()]. in
         * that case, the object parameter is zero though, so we won't
         * call into the DMU.
         */
        if (object != 0 && !(spa->spa_mode == SPA_MODE_READ &&
            !spa->spa_read_spacemaps)) {
                error = space_map_open(&ms->ms_sm, mos, object, ms->ms_start,
                    ms->ms_size, vd->vdev_ashift);

                if (error != 0) {
                        kmem_free(ms, sizeof (metaslab_t));
                        return (error);
                }

                ASSERT(ms->ms_sm != NULL);
                ms->ms_allocated_space = space_map_allocated(ms->ms_sm);
        }

        uint64_t shift, start;
        range_seg_type_t type =
            metaslab_calculate_range_tree_type(vd, ms, &start, &shift);

        ms->ms_allocatable = range_tree_create(NULL, type, NULL, start, shift);
        for (int t = 0; t < TXG_SIZE; t++) {
                ms->ms_allocating[t] = range_tree_create(NULL, type,
                    NULL, start, shift);
        }
        ms->ms_freeing = range_tree_create(NULL, type, NULL, start, shift);
        ms->ms_freed = range_tree_create(NULL, type, NULL, start, shift);
        for (int t = 0; t < TXG_DEFER_SIZE; t++) {
                ms->ms_defer[t] = range_tree_create(NULL, type, NULL,
                    start, shift);
        }
        ms->ms_checkpointing =
            range_tree_create(NULL, type, NULL, start, shift);
        ms->ms_unflushed_allocs =
            range_tree_create(NULL, type, NULL, start, shift);

        metaslab_rt_arg_t *mrap = kmem_zalloc(sizeof (*mrap), KM_SLEEP);
        mrap->mra_bt = &ms->ms_unflushed_frees_by_size;
        mrap->mra_floor_shift = metaslab_by_size_min_shift;
        ms->ms_unflushed_frees = range_tree_create(&metaslab_rt_ops,
            type, mrap, start, shift);

        ms->ms_trim = range_tree_create(NULL, type, NULL, start, shift);

        metaslab_group_add(mg, ms);
        metaslab_set_fragmentation(ms, B_FALSE);

        /*
         * If we're opening an existing pool (txg == 0) or creating
         * a new one (txg == TXG_INITIAL), all space is available now.
         * If we're adding space to an existing pool, the new space
         * does not become available until after this txg has synced.
         * The metaslab's weight will also be initialized when we sync
         * out this txg. This ensures that we don't attempt to allocate
         * from it before we have initialized it completely.
         */
        if (txg <= TXG_INITIAL) {
                metaslab_sync_done(ms, 0);
                metaslab_space_update(vd, mg->mg_class,
                    metaslab_allocated_space(ms), 0, 0);
        }

        if (txg != 0) {
                vdev_dirty(vd, 0, NULL, txg);
                vdev_dirty(vd, VDD_METASLAB, ms, txg);
        }

        *msp = ms;

        return (0);
}

static void
metaslab_fini_flush_data(metaslab_t *msp)
{
        spa_t *spa = msp->ms_group->mg_vd->vdev_spa;

        if (metaslab_unflushed_txg(msp) == 0) {
                ASSERT3P(avl_find(&spa->spa_metaslabs_by_flushed, msp, NULL),
                    ==, NULL);
                return;
        }
        ASSERT(spa_feature_is_active(spa, SPA_FEATURE_LOG_SPACEMAP));

        mutex_enter(&spa->spa_flushed_ms_lock);
        avl_remove(&spa->spa_metaslabs_by_flushed, msp);
        mutex_exit(&spa->spa_flushed_ms_lock);

        spa_log_sm_decrement_mscount(spa, metaslab_unflushed_txg(msp));
        spa_log_summary_decrement_mscount(spa, metaslab_unflushed_txg(msp),
            metaslab_unflushed_dirty(msp));
}

uint64_t
metaslab_unflushed_changes_memused(metaslab_t *ms)
{
        return ((range_tree_numsegs(ms->ms_unflushed_allocs) +
            range_tree_numsegs(ms->ms_unflushed_frees)) *
            ms->ms_unflushed_allocs->rt_root.bt_elem_size);
}

void
metaslab_fini(metaslab_t *msp)
{
        metaslab_group_t *mg = msp->ms_group;
        vdev_t *vd = mg->mg_vd;
        spa_t *spa = vd->vdev_spa;

        metaslab_fini_flush_data(msp);

        metaslab_group_remove(mg, msp);

        mutex_enter(&msp->ms_lock);
        VERIFY(msp->ms_group == NULL);

        /*
         * If this metaslab hasn't been through metaslab_sync_done() yet its
         * space hasn't been accounted for in its vdev and doesn't need to be
         * subtracted.
         */
        if (!msp->ms_new) {
                metaslab_space_update(vd, mg->mg_class,
                    -metaslab_allocated_space(msp), 0, -msp->ms_size);

        }
        space_map_close(msp->ms_sm);
        msp->ms_sm = NULL;

        metaslab_unload(msp);

        range_tree_destroy(msp->ms_allocatable);
        range_tree_destroy(msp->ms_freeing);
        range_tree_destroy(msp->ms_freed);

        ASSERT3U(spa->spa_unflushed_stats.sus_memused, >=,
            metaslab_unflushed_changes_memused(msp));
        spa->spa_unflushed_stats.sus_memused -=
            metaslab_unflushed_changes_memused(msp);
        range_tree_vacate(msp->ms_unflushed_allocs, NULL, NULL);
        range_tree_destroy(msp->ms_unflushed_allocs);
        range_tree_destroy(msp->ms_checkpointing);
        range_tree_vacate(msp->ms_unflushed_frees, NULL, NULL);
        range_tree_destroy(msp->ms_unflushed_frees);

        for (int t = 0; t < TXG_SIZE; t++) {
                range_tree_destroy(msp->ms_allocating[t]);
        }
        for (int t = 0; t < TXG_DEFER_SIZE; t++) {
                range_tree_destroy(msp->ms_defer[t]);
        }
        ASSERT0(msp->ms_deferspace);

        for (int t = 0; t < TXG_SIZE; t++)
                ASSERT(!txg_list_member(&vd->vdev_ms_list, msp, t));

        range_tree_vacate(msp->ms_trim, NULL, NULL);
        range_tree_destroy(msp->ms_trim);

        mutex_exit(&msp->ms_lock);
        cv_destroy(&msp->ms_load_cv);
        cv_destroy(&msp->ms_flush_cv);
        mutex_destroy(&msp->ms_lock);
        mutex_destroy(&msp->ms_sync_lock);
        ASSERT3U(msp->ms_allocator, ==, -1);

        kmem_free(msp, sizeof (metaslab_t));
}

#define FRAGMENTATION_TABLE_SIZE        17

/*
 * This table defines a segment size based fragmentation metric that will
 * allow each metaslab to derive its own fragmentation value. This is done
 * by calculating the space in each bucket of the spacemap histogram and
 * multiplying that by the fragmentation metric in this table. Doing
 * this for all buckets and dividing it by the total amount of free
 * space in this metaslab (i.e. the total free space in all buckets) gives
 * us the fragmentation metric. This means that a high fragmentation metric
 * equates to most of the free space being comprised of small segments.
 * Conversely, if the metric is low, then most of the free space is in
 * large segments. A 10% change in fragmentation equates to approximately
 * double the number of segments.
 *
 * This table defines 0% fragmented space using 16MB segments. Testing has
 * shown that segments that are greater than or equal to 16MB do not suffer
 * from drastic performance problems. Using this value, we derive the rest
 * of the table. Since the fragmentation value is never stored on disk, it
 * is possible to change these calculations in the future.
 */
static const int zfs_frag_table[FRAGMENTATION_TABLE_SIZE] = {
        100,    /* 512B */
        100,    /* 1K   */
        98,     /* 2K   */
        95,     /* 4K   */
        90,     /* 8K   */
        80,     /* 16K  */
        70,     /* 32K  */
        60,     /* 64K  */
        50,     /* 128K */
        40,     /* 256K */
        30,     /* 512K */
        20,     /* 1M   */
        15,     /* 2M   */
        10,     /* 4M   */
        5,      /* 8M   */
        0       /* 16M  */
};

/*
 * Calculate the metaslab's fragmentation metric and set ms_fragmentation.
 * Setting this value to ZFS_FRAG_INVALID means that the metaslab has not
 * been upgraded and does not support this metric. Otherwise, the return
 * value should be in the range [0, 100].
 */
static void
metaslab_set_fragmentation(metaslab_t *msp, boolean_t nodirty)
{
        spa_t *spa = msp->ms_group->mg_vd->vdev_spa;
        uint64_t fragmentation = 0;
        uint64_t total = 0;
        boolean_t feature_enabled = spa_feature_is_enabled(spa,
            SPA_FEATURE_SPACEMAP_HISTOGRAM);

        if (!feature_enabled) {
                msp->ms_fragmentation = ZFS_FRAG_INVALID;
                return;
        }

        /*
         * A null space map means that the entire metaslab is free
         * and thus is not fragmented.
         */
        if (msp->ms_sm == NULL) {
                msp->ms_fragmentation = 0;
                return;
        }

        /*
         * If this metaslab's space map has not been upgraded, flag it
         * so that we upgrade next time we encounter it.
         */
        if (msp->ms_sm->sm_dbuf->db_size != sizeof (space_map_phys_t)) {
                uint64_t txg = spa_syncing_txg(spa);
                vdev_t *vd = msp->ms_group->mg_vd;

                /*
                 * If we've reached the final dirty txg, then we must
                 * be shutting down the pool. We don't want to dirty
                 * any data past this point so skip setting the condense
                 * flag. We can retry this action the next time the pool
                 * is imported. We also skip marking this metaslab for
                 * condensing if the caller has explicitly set nodirty.
                 */
                if (!nodirty &&
                    spa_writeable(spa) && txg < spa_final_dirty_txg(spa)) {
                        msp->ms_condense_wanted = B_TRUE;
                        vdev_dirty(vd, VDD_METASLAB, msp, txg + 1);
                        zfs_dbgmsg("txg %llu, requesting force condense: "
                            "ms_id %llu, vdev_id %llu", (u_longlong_t)txg,
                            (u_longlong_t)msp->ms_id,
                            (u_longlong_t)vd->vdev_id);
                }
                msp->ms_fragmentation = ZFS_FRAG_INVALID;
                return;
        }

        for (int i = 0; i < SPACE_MAP_HISTOGRAM_SIZE; i++) {
                uint64_t space = 0;
                uint8_t shift = msp->ms_sm->sm_shift;

                int idx = MIN(shift - SPA_MINBLOCKSHIFT + i,
                    FRAGMENTATION_TABLE_SIZE - 1);

                if (msp->ms_sm->sm_phys->smp_histogram[i] == 0)
                        continue;

                space = msp->ms_sm->sm_phys->smp_histogram[i] << (i + shift);
                total += space;

                ASSERT3U(idx, <, FRAGMENTATION_TABLE_SIZE);
                fragmentation += space * zfs_frag_table[idx];
        }

        if (total > 0)
                fragmentation /= total;
        ASSERT3U(fragmentation, <=, 100);

        msp->ms_fragmentation = fragmentation;
}

/*
 * Compute a weight -- a selection preference value -- for the given metaslab.
 * This is based on the amount of free space, the level of fragmentation,
 * the LBA range, and whether the metaslab is loaded.
 */
static uint64_t
metaslab_space_weight(metaslab_t *msp)
{
        metaslab_group_t *mg = msp->ms_group;
        vdev_t *vd = mg->mg_vd;
        uint64_t weight, space;

        ASSERT(MUTEX_HELD(&msp->ms_lock));

        /*
         * The baseline weight is the metaslab's free space.
         */
        space = msp->ms_size - metaslab_allocated_space(msp);

        if (metaslab_fragmentation_factor_enabled &&
            msp->ms_fragmentation != ZFS_FRAG_INVALID) {
                /*
                 * Use the fragmentation information to inversely scale
                 * down the baseline weight. We need to ensure that we
                 * don't exclude this metaslab completely when it's 100%
                 * fragmented. To avoid this we reduce the fragmented value
                 * by 1.
                 */
                space = (space * (100 - (msp->ms_fragmentation - 1))) / 100;

                /*
                 * If space < SPA_MINBLOCKSIZE, then we will not allocate from
                 * this metaslab again. The fragmentation metric may have
                 * decreased the space to something smaller than
                 * SPA_MINBLOCKSIZE, so reset the space to SPA_MINBLOCKSIZE
                 * so that we can consume any remaining space.
                 */
                if (space > 0 && space < SPA_MINBLOCKSIZE)
                        space = SPA_MINBLOCKSIZE;
        }
        weight = space;

        /*
         * Modern disks have uniform bit density and constant angular velocity.
         * Therefore, the outer recording zones are faster (higher bandwidth)
         * than the inner zones by the ratio of outer to inner track diameter,
         * which is typically around 2:1.  We account for this by assigning
         * higher weight to lower metaslabs (multiplier ranging from 2x to 1x).
         * In effect, this means that we'll select the metaslab with the most
         * free bandwidth rather than simply the one with the most free space.
         */
        if (!vd->vdev_nonrot && metaslab_lba_weighting_enabled) {
                weight = 2 * weight - (msp->ms_id * weight) / vd->vdev_ms_count;
                ASSERT(weight >= space && weight <= 2 * space);
        }

        /*
         * If this metaslab is one we're actively using, adjust its
         * weight to make it preferable to any inactive metaslab so
         * we'll polish it off. If the fragmentation on this metaslab
         * has exceed our threshold, then don't mark it active.
         */
        if (msp->ms_loaded && msp->ms_fragmentation != ZFS_FRAG_INVALID &&
            msp->ms_fragmentation <= zfs_metaslab_fragmentation_threshold) {
                weight |= (msp->ms_weight & METASLAB_ACTIVE_MASK);
        }

        WEIGHT_SET_SPACEBASED(weight);
        return (weight);
}

/*
 * Return the weight of the specified metaslab, according to the segment-based
 * weighting algorithm. The metaslab must be loaded. This function can
 * be called within a sync pass since it relies only on the metaslab's
 * range tree which is always accurate when the metaslab is loaded.
 */
static uint64_t
metaslab_weight_from_range_tree(metaslab_t *msp)
{
        uint64_t weight = 0;
        uint32_t segments = 0;

        ASSERT(msp->ms_loaded);

        for (int i = RANGE_TREE_HISTOGRAM_SIZE - 1; i >= SPA_MINBLOCKSHIFT;
            i--) {
                uint8_t shift = msp->ms_group->mg_vd->vdev_ashift;
                int max_idx = SPACE_MAP_HISTOGRAM_SIZE + shift - 1;

                segments <<= 1;
                segments += msp->ms_allocatable->rt_histogram[i];

                /*
                 * The range tree provides more precision than the space map
                 * and must be downgraded so that all values fit within the
                 * space map's histogram. This allows us to compare loaded
                 * vs. unloaded metaslabs to determine which metaslab is
                 * considered "best".
                 */
                if (i > max_idx)
                        continue;

                if (segments != 0) {
                        WEIGHT_SET_COUNT(weight, segments);
                        WEIGHT_SET_INDEX(weight, i);
                        WEIGHT_SET_ACTIVE(weight, 0);
                        break;
                }
        }
        return (weight);
}

/*
 * Calculate the weight based on the on-disk histogram. Should be applied
 * only to unloaded metaslabs  (i.e no incoming allocations) in-order to
 * give results consistent with the on-disk state
 */
static uint64_t
metaslab_weight_from_spacemap(metaslab_t *msp)
{
        space_map_t *sm = msp->ms_sm;
        ASSERT(!msp->ms_loaded);
        ASSERT(sm != NULL);
        ASSERT3U(space_map_object(sm), !=, 0);
        ASSERT3U(sm->sm_dbuf->db_size, ==, sizeof (space_map_phys_t));

        /*
         * Create a joint histogram from all the segments that have made
         * it to the metaslab's space map histogram, that are not yet
         * available for allocation because they are still in the freeing
         * pipeline (e.g. freeing, freed, and defer trees). Then subtract
         * these segments from the space map's histogram to get a more
         * accurate weight.
         */
        uint64_t deferspace_histogram[SPACE_MAP_HISTOGRAM_SIZE] = {0};
        for (int i = 0; i < SPACE_MAP_HISTOGRAM_SIZE; i++)
                deferspace_histogram[i] += msp->ms_synchist[i];
        for (int t = 0; t < TXG_DEFER_SIZE; t++) {
                for (int i = 0; i < SPACE_MAP_HISTOGRAM_SIZE; i++) {
                        deferspace_histogram[i] += msp->ms_deferhist[t][i];
                }
        }

        uint64_t weight = 0;
        for (int i = SPACE_MAP_HISTOGRAM_SIZE - 1; i >= 0; i--) {
                ASSERT3U(sm->sm_phys->smp_histogram[i], >=,
                    deferspace_histogram[i]);
                uint64_t count =
                    sm->sm_phys->smp_histogram[i] - deferspace_histogram[i];
                if (count != 0) {
                        WEIGHT_SET_COUNT(weight, count);
                        WEIGHT_SET_INDEX(weight, i + sm->sm_shift);
                        WEIGHT_SET_ACTIVE(weight, 0);
                        break;
                }
        }
        return (weight);
}

/*
 * Compute a segment-based weight for the specified metaslab. The weight
 * is determined by highest bucket in the histogram. The information
 * for the highest bucket is encoded into the weight value.
 */
static uint64_t
metaslab_segment_weight(metaslab_t *msp)
{
        metaslab_group_t *mg = msp->ms_group;
        uint64_t weight = 0;
        uint8_t shift = mg->mg_vd->vdev_ashift;

        ASSERT(MUTEX_HELD(&msp->ms_lock));

        /*
         * The metaslab is completely free.
         */
        if (metaslab_allocated_space(msp) == 0) {
                int idx = highbit64(msp->ms_size) - 1;
                int max_idx = SPACE_MAP_HISTOGRAM_SIZE + shift - 1;

                if (idx < max_idx) {
                        WEIGHT_SET_COUNT(weight, 1ULL);
                        WEIGHT_SET_INDEX(weight, idx);
                } else {
                        WEIGHT_SET_COUNT(weight, 1ULL << (idx - max_idx));
                        WEIGHT_SET_INDEX(weight, max_idx);
                }
                WEIGHT_SET_ACTIVE(weight, 0);
                ASSERT(!WEIGHT_IS_SPACEBASED(weight));
                return (weight);
        }

        ASSERT3U(msp->ms_sm->sm_dbuf->db_size, ==, sizeof (space_map_phys_t));

        /*
         * If the metaslab is fully allocated then just make the weight 0.
         */
        if (metaslab_allocated_space(msp) == msp->ms_size)
                return (0);
        /*
         * If the metaslab is already loaded, then use the range tree to
         * determine the weight. Otherwise, we rely on the space map information
         * to generate the weight.
         */
        if (msp->ms_loaded) {
                weight = metaslab_weight_from_range_tree(msp);
        } else {
                weight = metaslab_weight_from_spacemap(msp);
        }

        /*
         * If the metaslab was active the last time we calculated its weight
         * then keep it active. We want to consume the entire region that
         * is associated with this weight.
         */
        if (msp->ms_activation_weight != 0 && weight != 0)
                WEIGHT_SET_ACTIVE(weight, WEIGHT_GET_ACTIVE(msp->ms_weight));
        return (weight);
}

/*
 * Determine if we should attempt to allocate from this metaslab. If the
 * metaslab is loaded, then we can determine if the desired allocation
 * can be satisfied by looking at the size of the maximum free segment
 * on that metaslab. Otherwise, we make our decision based on the metaslab's
 * weight. For segment-based weighting we can determine the maximum
 * allocation based on the index encoded in its value. For space-based
 * weights we rely on the entire weight (excluding the weight-type bit).
 */
static boolean_t
metaslab_should_allocate(metaslab_t *msp, uint64_t asize, boolean_t try_hard)
{
        /*
         * If the metaslab is loaded, ms_max_size is definitive and we can use
         * the fast check. If it's not, the ms_max_size is a lower bound (once
         * set), and we should use the fast check as long as we're not in
         * try_hard and it's been less than zfs_metaslab_max_size_cache_sec
         * seconds since the metaslab was unloaded.
         */
        if (msp->ms_loaded ||
            (msp->ms_max_size != 0 && !try_hard && gethrtime() <
            msp->ms_unload_time + SEC2NSEC(zfs_metaslab_max_size_cache_sec)))
                return (msp->ms_max_size >= asize);

        boolean_t should_allocate;
        if (!WEIGHT_IS_SPACEBASED(msp->ms_weight)) {
                /*
                 * The metaslab segment weight indicates segments in the
                 * range [2^i, 2^(i+1)), where i is the index in the weight.
                 * Since the asize might be in the middle of the range, we
                 * should attempt the allocation if asize < 2^(i+1).
                 */
                should_allocate = (asize <
                    1ULL << (WEIGHT_GET_INDEX(msp->ms_weight) + 1));
        } else {
                should_allocate = (asize <=
                    (msp->ms_weight & ~METASLAB_WEIGHT_TYPE));
        }

        return (should_allocate);
}

static uint64_t
metaslab_weight(metaslab_t *msp, boolean_t nodirty)
{
        vdev_t *vd = msp->ms_group->mg_vd;
        spa_t *spa = vd->vdev_spa;
        uint64_t weight;

        ASSERT(MUTEX_HELD(&msp->ms_lock));

        metaslab_set_fragmentation(msp, nodirty);

        /*
         * Update the maximum size. If the metaslab is loaded, this will
         * ensure that we get an accurate maximum size if newly freed space
         * has been added back into the free tree. If the metaslab is
         * unloaded, we check if there's a larger free segment in the
         * unflushed frees. This is a lower bound on the largest allocatable
         * segment size. Coalescing of adjacent entries may reveal larger
         * allocatable segments, but we aren't aware of those until loading
         * the space map into a range tree.
         */
        if (msp->ms_loaded) {
                msp->ms_max_size = metaslab_largest_allocatable(msp);
        } else {
                msp->ms_max_size = MAX(msp->ms_max_size,
                    metaslab_largest_unflushed_free(msp));
        }

        /*
         * Segment-based weighting requires space map histogram support.
         */
        if (zfs_metaslab_segment_weight_enabled &&
            spa_feature_is_enabled(spa, SPA_FEATURE_SPACEMAP_HISTOGRAM) &&
            (msp->ms_sm == NULL || msp->ms_sm->sm_dbuf->db_size ==
            sizeof (space_map_phys_t))) {
                weight = metaslab_segment_weight(msp);
        } else {
                weight = metaslab_space_weight(msp);
        }
        return (weight);
}

void
metaslab_recalculate_weight_and_sort(metaslab_t *msp)
{
        ASSERT(MUTEX_HELD(&msp->ms_lock));

        /* note: we preserve the mask (e.g. indication of primary, etc..) */
        uint64_t was_active = msp->ms_weight & METASLAB_ACTIVE_MASK;
        metaslab_group_sort(msp->ms_group, msp,
            metaslab_weight(msp, B_FALSE) | was_active);
}

static int
metaslab_activate_allocator(metaslab_group_t *mg, metaslab_t *msp,
    int allocator, uint64_t activation_weight)
{
        metaslab_group_allocator_t *mga = &mg->mg_allocator[allocator];
        ASSERT(MUTEX_HELD(&msp->ms_lock));

        /*
         * If we're activating for the claim code, we don't want to actually
         * set the metaslab up for a specific allocator.
         */
        if (activation_weight == METASLAB_WEIGHT_CLAIM) {
                ASSERT0(msp->ms_activation_weight);
                msp->ms_activation_weight = msp->ms_weight;
                metaslab_group_sort(mg, msp, msp->ms_weight |
                    activation_weight);
                return (0);
        }

        metaslab_t **mspp = (activation_weight == METASLAB_WEIGHT_PRIMARY ?
            &mga->mga_primary : &mga->mga_secondary);

        mutex_enter(&mg->mg_lock);
        if (*mspp != NULL) {
                mutex_exit(&mg->mg_lock);
                return (EEXIST);
        }

        *mspp = msp;
        ASSERT3S(msp->ms_allocator, ==, -1);
        msp->ms_allocator = allocator;
        msp->ms_primary = (activation_weight == METASLAB_WEIGHT_PRIMARY);

        ASSERT0(msp->ms_activation_weight);
        msp->ms_activation_weight = msp->ms_weight;
        metaslab_group_sort_impl(mg, msp,
            msp->ms_weight | activation_weight);
        mutex_exit(&mg->mg_lock);

        return (0);
}

static int
metaslab_activate(metaslab_t *msp, int allocator, uint64_t activation_weight)
{
        ASSERT(MUTEX_HELD(&msp->ms_lock));

        /*
         * The current metaslab is already activated for us so there
         * is nothing to do. Already activated though, doesn't mean
         * that this metaslab is activated for our allocator nor our
         * requested activation weight. The metaslab could have started
         * as an active one for our allocator but changed allocators
         * while we were waiting to grab its ms_lock or we stole it
         * [see find_valid_metaslab()]. This means that there is a
         * possibility of passivating a metaslab of another allocator
         * or from a different activation mask, from this thread.
         */
        if ((msp->ms_weight & METASLAB_ACTIVE_MASK) != 0) {
                ASSERT(msp->ms_loaded);
                return (0);
        }

        int error = metaslab_load(msp);
        if (error != 0) {
                metaslab_group_sort(msp->ms_group, msp, 0);
                return (error);
        }

        /*
         * When entering metaslab_load() we may have dropped the
         * ms_lock because we were loading this metaslab, or we
         * were waiting for another thread to load it for us. In
         * that scenario, we recheck the weight of the metaslab
         * to see if it was activated by another thread.
         *
         * If the metaslab was activated for another allocator or
         * it was activated with a different activation weight (e.g.
         * we wanted to make it a primary but it was activated as
         * secondary) we return error (EBUSY).
         *
         * If the metaslab was activated for the same allocator
         * and requested activation mask, skip activating it.
         */
        if ((msp->ms_weight & METASLAB_ACTIVE_MASK) != 0) {
                if (msp->ms_allocator != allocator)
                        return (EBUSY);

                if ((msp->ms_weight & activation_weight) == 0)
                        return (SET_ERROR(EBUSY));

                EQUIV((activation_weight == METASLAB_WEIGHT_PRIMARY),
                    msp->ms_primary);
                return (0);
        }

        /*
         * If the metaslab has literally 0 space, it will have weight 0. In
         * that case, don't bother activating it. This can happen if the
         * metaslab had space during find_valid_metaslab, but another thread
         * loaded it and used all that space while we were waiting to grab the
         * lock.
         */
        if (msp->ms_weight == 0) {
                ASSERT0(range_tree_space(msp->ms_allocatable));
                return (SET_ERROR(ENOSPC));
        }

        if ((error = metaslab_activate_allocator(msp->ms_group, msp,
            allocator, activation_weight)) != 0) {
                return (error);
        }

        ASSERT(msp->ms_loaded);
        ASSERT(msp->ms_weight & METASLAB_ACTIVE_MASK);

        return (0);
}

static void
metaslab_passivate_allocator(metaslab_group_t *mg, metaslab_t *msp,
    uint64_t weight)
{
        ASSERT(MUTEX_HELD(&msp->ms_lock));
        ASSERT(msp->ms_loaded);

        if (msp->ms_weight & METASLAB_WEIGHT_CLAIM) {
                metaslab_group_sort(mg, msp, weight);
                return;
        }

        mutex_enter(&mg->mg_lock);
        ASSERT3P(msp->ms_group, ==, mg);
        ASSERT3S(0, <=, msp->ms_allocator);
        ASSERT3U(msp->ms_allocator, <, mg->mg_allocators);

        metaslab_group_allocator_t *mga = &mg->mg_allocator[msp->ms_allocator];
        if (msp->ms_primary) {
                ASSERT3P(mga->mga_primary, ==, msp);
                ASSERT(msp->ms_weight & METASLAB_WEIGHT_PRIMARY);
                mga->mga_primary = NULL;
        } else {
                ASSERT3P(mga->mga_secondary, ==, msp);
                ASSERT(msp->ms_weight & METASLAB_WEIGHT_SECONDARY);
                mga->mga_secondary = NULL;
        }
        msp->ms_allocator = -1;
        metaslab_group_sort_impl(mg, msp, weight);
        mutex_exit(&mg->mg_lock);
}

static void
metaslab_passivate(metaslab_t *msp, uint64_t weight)
{
        uint64_t size __maybe_unused = weight & ~METASLAB_WEIGHT_TYPE;

        /*
         * If size < SPA_MINBLOCKSIZE, then we will not allocate from
         * this metaslab again.  In that case, it had better be empty,
         * or we would be leaving space on the table.
         */
        ASSERT(!WEIGHT_IS_SPACEBASED(msp->ms_weight) ||
            size >= SPA_MINBLOCKSIZE ||
            range_tree_space(msp->ms_allocatable) == 0);
        ASSERT0(weight & METASLAB_ACTIVE_MASK);

        ASSERT(msp->ms_activation_weight != 0);
        msp->ms_activation_weight = 0;
        metaslab_passivate_allocator(msp->ms_group, msp, weight);
        ASSERT0(msp->ms_weight & METASLAB_ACTIVE_MASK);
}

/*
 * Segment-based metaslabs are activated once and remain active until
 * we either fail an allocation attempt (similar to space-based metaslabs)
 * or have exhausted the free space in zfs_metaslab_switch_threshold
 * buckets since the metaslab was activated. This function checks to see
 * if we've exhausted the zfs_metaslab_switch_threshold buckets in the
 * metaslab and passivates it proactively. This will allow us to select a
 * metaslab with a larger contiguous region, if any, remaining within this
 * metaslab group. If we're in sync pass > 1, then we continue using this
 * metaslab so that we don't dirty more block and cause more sync passes.
 */
static void
metaslab_segment_may_passivate(metaslab_t *msp)
{
        spa_t *spa = msp->ms_group->mg_vd->vdev_spa;

        if (WEIGHT_IS_SPACEBASED(msp->ms_weight) || spa_sync_pass(spa) > 1)
                return;

        /*
         * Since we are in the middle of a sync pass, the most accurate
         * information that is accessible to us is the in-core range tree
         * histogram; calculate the new weight based on that information.
         */
        uint64_t weight = metaslab_weight_from_range_tree(msp);
        int activation_idx = WEIGHT_GET_INDEX(msp->ms_activation_weight);
        int current_idx = WEIGHT_GET_INDEX(weight);

        if (current_idx <= activation_idx - zfs_metaslab_switch_threshold)
                metaslab_passivate(msp, weight);
}

static void
metaslab_preload(void *arg)
{
        metaslab_t *msp = arg;
        metaslab_class_t *mc = msp->ms_group->mg_class;
        spa_t *spa = mc->mc_spa;
        fstrans_cookie_t cookie = spl_fstrans_mark();

        ASSERT(!MUTEX_HELD(&msp->ms_group->mg_lock));

        mutex_enter(&msp->ms_lock);
        (void) metaslab_load(msp);
        metaslab_set_selected_txg(msp, spa_syncing_txg(spa));
        mutex_exit(&msp->ms_lock);
        spl_fstrans_unmark(cookie);
}

static void
metaslab_group_preload(metaslab_group_t *mg)
{
        spa_t *spa = mg->mg_vd->vdev_spa;
        metaslab_t *msp;
        avl_tree_t *t = &mg->mg_metaslab_tree;
        int m = 0;

        if (spa_shutting_down(spa) || !metaslab_preload_enabled) {
                taskq_wait_outstanding(mg->mg_taskq, 0);
                return;
        }

        mutex_enter(&mg->mg_lock);

        /*
         * Load the next potential metaslabs
         */
        for (msp = avl_first(t); msp != NULL; msp = AVL_NEXT(t, msp)) {
                ASSERT3P(msp->ms_group, ==, mg);

                /*
                 * We preload only the maximum number of metaslabs specified
                 * by metaslab_preload_limit. If a metaslab is being forced
                 * to condense then we preload it too. This will ensure
                 * that force condensing happens in the next txg.
                 */
                if (++m > metaslab_preload_limit && !msp->ms_condense_wanted) {
                        continue;
                }

                VERIFY(taskq_dispatch(mg->mg_taskq, metaslab_preload,
                    msp, TQ_SLEEP) != TASKQID_INVALID);
        }
        mutex_exit(&mg->mg_lock);
}

/*
 * Determine if the space map's on-disk footprint is past our tolerance for
 * inefficiency. We would like to use the following criteria to make our
 * decision:
 *
 * 1. Do not condense if the size of the space map object would dramatically
 *    increase as a result of writing out the free space range tree.
 *
 * 2. Condense if the on on-disk space map representation is at least
 *    zfs_condense_pct/100 times the size of the optimal representation
 *    (i.e. zfs_condense_pct = 110 and in-core = 1MB, optimal = 1.1MB).
 *
 * 3. Do not condense if the on-disk size of the space map does not actually
 *    decrease.
 *
 * Unfortunately, we cannot compute the on-disk size of the space map in this
 * context because we cannot accurately compute the effects of compression, etc.
 * Instead, we apply the heuristic described in the block comment for
 * zfs_metaslab_condense_block_threshold - we only condense if the space used
 * is greater than a threshold number of blocks.
 */
static boolean_t
metaslab_should_condense(metaslab_t *msp)
{
        space_map_t *sm = msp->ms_sm;
        vdev_t *vd = msp->ms_group->mg_vd;
        uint64_t vdev_blocksize = 1ULL << vd->vdev_ashift;

        ASSERT(MUTEX_HELD(&msp->ms_lock));
        ASSERT(msp->ms_loaded);
        ASSERT(sm != NULL);
        ASSERT3U(spa_sync_pass(vd->vdev_spa), ==, 1);

        /*
         * We always condense metaslabs that are empty and metaslabs for
         * which a condense request has been made.
         */
        if (range_tree_numsegs(msp->ms_allocatable) == 0 ||
            msp->ms_condense_wanted)
                return (B_TRUE);

        uint64_t record_size = MAX(sm->sm_blksz, vdev_blocksize);
        uint64_t object_size = space_map_length(sm);
        uint64_t optimal_size = space_map_estimate_optimal_size(sm,
            msp->ms_allocatable, SM_NO_VDEVID);

        return (object_size >= (optimal_size * zfs_condense_pct / 100) &&
            object_size > zfs_metaslab_condense_block_threshold * record_size);
}

/*
 * Condense the on-disk space map representation to its minimized form.
 * The minimized form consists of a small number of allocations followed
 * by the entries of the free range tree (ms_allocatable). The condensed
 * spacemap contains all the entries of previous TXGs (including those in
 * the pool-wide log spacemaps; thus this is effectively a superset of
 * metaslab_flush()), but this TXG's entries still need to be written.
 */
static void
metaslab_condense(metaslab_t *msp, dmu_tx_t *tx)
{
        range_tree_t *condense_tree;
        space_map_t *sm = msp->ms_sm;
        uint64_t txg = dmu_tx_get_txg(tx);
        spa_t *spa = msp->ms_group->mg_vd->vdev_spa;

        ASSERT(MUTEX_HELD(&msp->ms_lock));
        ASSERT(msp->ms_loaded);
        ASSERT(msp->ms_sm != NULL);

        /*
         * In order to condense the space map, we need to change it so it
         * only describes which segments are currently allocated and free.
         *
         * All the current free space resides in the ms_allocatable, all
         * the ms_defer trees, and all the ms_allocating trees. We ignore
         * ms_freed because it is empty because we're in sync pass 1. We
         * ignore ms_freeing because these changes are not yet reflected
         * in the spacemap (they will be written later this txg).
         *
         * So to truncate the space map to represent all the entries of
         * previous TXGs we do the following:
         *
         * 1] We create a range tree (condense tree) that is 100% empty.
         * 2] We add to it all segments found in the ms_defer trees
         *    as those segments are marked as free in the original space
         *    map. We do the same with the ms_allocating trees for the same
         *    reason. Adding these segments should be a relatively
         *    inexpensive operation since we expect these trees to have a
         *    small number of nodes.
         * 3] We vacate any unflushed allocs, since they are not frees we
         *    need to add to the condense tree. Then we vacate any
         *    unflushed frees as they should already be part of ms_allocatable.
         * 4] At this point, we would ideally like to add all segments
         *    in the ms_allocatable tree from the condense tree. This way
         *    we would write all the entries of the condense tree as the
         *    condensed space map, which would only contain freed
         *    segments with everything else assumed to be allocated.
         *
         *    Doing so can be prohibitively expensive as ms_allocatable can
         *    be large, and therefore computationally expensive to add to
         *    the condense_tree. Instead we first sync out an entry marking
         *    everything as allocated, then the condense_tree and then the
         *    ms_allocatable, in the condensed space map. While this is not
         *    optimal, it is typically close to optimal and more importantly
         *    much cheaper to compute.
         *
         * 5] Finally, as both of the unflushed trees were written to our
         *    new and condensed metaslab space map, we basically flushed
         *    all the unflushed changes to disk, thus we call
         *    metaslab_flush_update().
         */
        ASSERT3U(spa_sync_pass(spa), ==, 1);
        ASSERT(range_tree_is_empty(msp->ms_freed)); /* since it is pass 1 */

        zfs_dbgmsg("condensing: txg %llu, msp[%llu] %px, vdev id %llu, "
            "spa %s, smp size %llu, segments %llu, forcing condense=%s",
            (u_longlong_t)txg, (u_longlong_t)msp->ms_id, msp,
            (u_longlong_t)msp->ms_group->mg_vd->vdev_id,
            spa->spa_name, (u_longlong_t)space_map_length(msp->ms_sm),
            (u_longlong_t)range_tree_numsegs(msp->ms_allocatable),
            msp->ms_condense_wanted ? "TRUE" : "FALSE");

        msp->ms_condense_wanted = B_FALSE;

        range_seg_type_t type;
        uint64_t shift, start;
        type = metaslab_calculate_range_tree_type(msp->ms_group->mg_vd, msp,
            &start, &shift);

        condense_tree = range_tree_create(NULL, type, NULL, start, shift);

        for (int t = 0; t < TXG_DEFER_SIZE; t++) {
                range_tree_walk(msp->ms_defer[t],
                    range_tree_add, condense_tree);
        }

        for (int t = 0; t < TXG_CONCURRENT_STATES; t++) {
                range_tree_walk(msp->ms_allocating[(txg + t) & TXG_MASK],
                    range_tree_add, condense_tree);
        }

        ASSERT3U(spa->spa_unflushed_stats.sus_memused, >=,
            metaslab_unflushed_changes_memused(msp));
        spa->spa_unflushed_stats.sus_memused -=
            metaslab_unflushed_changes_memused(msp);
        range_tree_vacate(msp->ms_unflushed_allocs, NULL, NULL);
        range_tree_vacate(msp->ms_unflushed_frees, NULL, NULL);

        /*
         * We're about to drop the metaslab's lock thus allowing other
         * consumers to change it's content. Set the metaslab's ms_condensing
         * flag to ensure that allocations on this metaslab do not occur
         * while we're in the middle of committing it to disk. This is only
         * critical for ms_allocatable as all other range trees use per TXG
         * views of their content.
         */
        msp->ms_condensing = B_TRUE;

        mutex_exit(&msp->ms_lock);
        uint64_t object = space_map_object(msp->ms_sm);
        space_map_truncate(sm,
            spa_feature_is_enabled(spa, SPA_FEATURE_LOG_SPACEMAP) ?
            zfs_metaslab_sm_blksz_with_log : zfs_metaslab_sm_blksz_no_log, tx);

        /*
         * space_map_truncate() may have reallocated the spacemap object.
         * If so, update the vdev_ms_array.
         */
        if (space_map_object(msp->ms_sm) != object) {
                object = space_map_object(msp->ms_sm);
                dmu_write(spa->spa_meta_objset,
                    msp->ms_group->mg_vd->vdev_ms_array, sizeof (uint64_t) *
                    msp->ms_id, sizeof (uint64_t), &object, tx);
        }

        /*
         * Note:
         * When the log space map feature is enabled, each space map will
         * always have ALLOCS followed by FREES for each sync pass. This is
         * typically true even when the log space map feature is disabled,
         * except from the case where a metaslab goes through metaslab_sync()
         * and gets condensed. In that case the metaslab's space map will have
         * ALLOCS followed by FREES (due to condensing) followed by ALLOCS
         * followed by FREES (due to space_map_write() in metaslab_sync()) for
         * sync pass 1.
         */
        range_tree_t *tmp_tree = range_tree_create(NULL, type, NULL, start,
            shift);
        range_tree_add(tmp_tree, msp->ms_start, msp->ms_size);
        space_map_write(sm, tmp_tree, SM_ALLOC, SM_NO_VDEVID, tx);
        space_map_write(sm, msp->ms_allocatable, SM_FREE, SM_NO_VDEVID, tx);
        space_map_write(sm, condense_tree, SM_FREE, SM_NO_VDEVID, tx);

        range_tree_vacate(condense_tree, NULL, NULL);
        range_tree_destroy(condense_tree);
        range_tree_vacate(tmp_tree, NULL, NULL);
        range_tree_destroy(tmp_tree);
        mutex_enter(&msp->ms_lock);

        msp->ms_condensing = B_FALSE;
        metaslab_flush_update(msp, tx);
}

static void
metaslab_unflushed_add(metaslab_t *msp, dmu_tx_t *tx)
{
        spa_t *spa = msp->ms_group->mg_vd->vdev_spa;
        ASSERT(spa_syncing_log_sm(spa) != NULL);
        ASSERT(msp->ms_sm != NULL);
        ASSERT(range_tree_is_empty(msp->ms_unflushed_allocs));
        ASSERT(range_tree_is_empty(msp->ms_unflushed_frees));

        mutex_enter(&spa->spa_flushed_ms_lock);
        metaslab_set_unflushed_txg(msp, spa_syncing_txg(spa), tx);
        metaslab_set_unflushed_dirty(msp, B_TRUE);
        avl_add(&spa->spa_metaslabs_by_flushed, msp);
        mutex_exit(&spa->spa_flushed_ms_lock);

        spa_log_sm_increment_current_mscount(spa);
        spa_log_summary_add_flushed_metaslab(spa, B_TRUE);
}

void
metaslab_unflushed_bump(metaslab_t *msp, dmu_tx_t *tx, boolean_t dirty)
{
        spa_t *spa = msp->ms_group->mg_vd->vdev_spa;
        ASSERT(spa_syncing_log_sm(spa) != NULL);
        ASSERT(msp->ms_sm != NULL);
        ASSERT(metaslab_unflushed_txg(msp) != 0);
        ASSERT3P(avl_find(&spa->spa_metaslabs_by_flushed, msp, NULL), ==, msp);
        ASSERT(range_tree_is_empty(msp->ms_unflushed_allocs));
        ASSERT(range_tree_is_empty(msp->ms_unflushed_frees));

        VERIFY3U(tx->tx_txg, <=, spa_final_dirty_txg(spa));

        /* update metaslab's position in our flushing tree */
        uint64_t ms_prev_flushed_txg = metaslab_unflushed_txg(msp);
        boolean_t ms_prev_flushed_dirty = metaslab_unflushed_dirty(msp);
        mutex_enter(&spa->spa_flushed_ms_lock);
        avl_remove(&spa->spa_metaslabs_by_flushed, msp);
        metaslab_set_unflushed_txg(msp, spa_syncing_txg(spa), tx);
        metaslab_set_unflushed_dirty(msp, dirty);
        avl_add(&spa->spa_metaslabs_by_flushed, msp);
        mutex_exit(&spa->spa_flushed_ms_lock);

        /* update metaslab counts of spa_log_sm_t nodes */
        spa_log_sm_decrement_mscount(spa, ms_prev_flushed_txg);
        spa_log_sm_increment_current_mscount(spa);

        /* update log space map summary */
        spa_log_summary_decrement_mscount(spa, ms_prev_flushed_txg,
            ms_prev_flushed_dirty);
        spa_log_summary_add_flushed_metaslab(spa, dirty);

        /* cleanup obsolete logs if any */
        spa_cleanup_old_sm_logs(spa, tx);
}

/*
 * Called when the metaslab has been flushed (its own spacemap now reflects
 * all the contents of the pool-wide spacemap log). Updates the metaslab's
 * metadata and any pool-wide related log space map data (e.g. summary,
 * obsolete logs, etc..) to reflect that.
 */
static void
metaslab_flush_update(metaslab_t *msp, dmu_tx_t *tx)
{
        metaslab_group_t *mg = msp->ms_group;
        spa_t *spa = mg->mg_vd->vdev_spa;

        ASSERT(MUTEX_HELD(&msp->ms_lock));

        ASSERT3U(spa_sync_pass(spa), ==, 1);

        /*
         * Just because a metaslab got flushed, that doesn't mean that
         * it will pass through metaslab_sync_done(). Thus, make sure to
         * update ms_synced_length here in case it doesn't.
         */
        msp->ms_synced_length = space_map_length(msp->ms_sm);

        /*
         * We may end up here from metaslab_condense() without the
         * feature being active. In that case this is a no-op.
         */
        if (!spa_feature_is_active(spa, SPA_FEATURE_LOG_SPACEMAP) ||
            metaslab_unflushed_txg(msp) == 0)
                return;

        metaslab_unflushed_bump(msp, tx, B_FALSE);
}

boolean_t
metaslab_flush(metaslab_t *msp, dmu_tx_t *tx)
{
        spa_t *spa = msp->ms_group->mg_vd->vdev_spa;

        ASSERT(MUTEX_HELD(&msp->ms_lock));
        ASSERT3U(spa_sync_pass(spa), ==, 1);
        ASSERT(spa_feature_is_active(spa, SPA_FEATURE_LOG_SPACEMAP));

        ASSERT(msp->ms_sm != NULL);
        ASSERT(metaslab_unflushed_txg(msp) != 0);
        ASSERT(avl_find(&spa->spa_metaslabs_by_flushed, msp, NULL) != NULL);

        /*
         * There is nothing wrong with flushing the same metaslab twice, as
         * this codepath should work on that case. However, the current
         * flushing scheme makes sure to avoid this situation as we would be
         * making all these calls without having anything meaningful to write
         * to disk. We assert this behavior here.
         */
        ASSERT3U(metaslab_unflushed_txg(msp), <, dmu_tx_get_txg(tx));

        /*
         * We can not flush while loading, because then we would
         * not load the ms_unflushed_{allocs,frees}.
         */
        if (msp->ms_loading)
                return (B_FALSE);

        metaslab_verify_space(msp, dmu_tx_get_txg(tx));
        metaslab_verify_weight_and_frag(msp);

        /*
         * Metaslab condensing is effectively flushing. Therefore if the
         * metaslab can be condensed we can just condense it instead of
         * flushing it.
         *
         * Note that metaslab_condense() does call metaslab_flush_update()
         * so we can just return immediately after condensing. We also
         * don't need to care about setting ms_flushing or broadcasting
         * ms_flush_cv, even if we temporarily drop the ms_lock in
         * metaslab_condense(), as the metaslab is already loaded.
         */
        if (msp->ms_loaded && metaslab_should_condense(msp)) {
                metaslab_group_t *mg = msp->ms_group;

                /*
                 * For all histogram operations below refer to the
                 * comments of metaslab_sync() where we follow a
                 * similar procedure.
                 */
                metaslab_group_histogram_verify(mg);
                metaslab_class_histogram_verify(mg->mg_class);
                metaslab_group_histogram_remove(mg, msp);

                metaslab_condense(msp, tx);

                space_map_histogram_clear(msp->ms_sm);
                space_map_histogram_add(msp->ms_sm, msp->ms_allocatable, tx);
                ASSERT(range_tree_is_empty(msp->ms_freed));
                for (int t = 0; t < TXG_DEFER_SIZE; t++) {
                        space_map_histogram_add(msp->ms_sm,
                            msp->ms_defer[t], tx);
                }
                metaslab_aux_histograms_update(msp);

                metaslab_group_histogram_add(mg, msp);
                metaslab_group_histogram_verify(mg);
                metaslab_class_histogram_verify(mg->mg_class);

                metaslab_verify_space(msp, dmu_tx_get_txg(tx));

                /*
                 * Since we recreated the histogram (and potentially
                 * the ms_sm too while condensing) ensure that the
                 * weight is updated too because we are not guaranteed
                 * that this metaslab is dirty and will go through
                 * metaslab_sync_done().
                 */
                metaslab_recalculate_weight_and_sort(msp);
                return (B_TRUE);
        }

        msp->ms_flushing = B_TRUE;
        uint64_t sm_len_before = space_map_length(msp->ms_sm);

        mutex_exit(&msp->ms_lock);
        space_map_write(msp->ms_sm, msp->ms_unflushed_allocs, SM_ALLOC,
            SM_NO_VDEVID, tx);
        space_map_write(msp->ms_sm, msp->ms_unflushed_frees, SM_FREE,
            SM_NO_VDEVID, tx);
        mutex_enter(&msp->ms_lock);

        uint64_t sm_len_after = space_map_length(msp->ms_sm);
        if (zfs_flags & ZFS_DEBUG_LOG_SPACEMAP) {
                zfs_dbgmsg("flushing: txg %llu, spa %s, vdev_id %llu, "
                    "ms_id %llu, unflushed_allocs %llu, unflushed_frees %llu, "
                    "appended %llu bytes", (u_longlong_t)dmu_tx_get_txg(tx),
                    spa_name(spa),
                    (u_longlong_t)msp->ms_group->mg_vd->vdev_id,
                    (u_longlong_t)msp->ms_id,
                    (u_longlong_t)range_tree_space(msp->ms_unflushed_allocs),
                    (u_longlong_t)range_tree_space(msp->ms_unflushed_frees),
                    (u_longlong_t)(sm_len_after - sm_len_before));
        }

        ASSERT3U(spa->spa_unflushed_stats.sus_memused, >=,
            metaslab_unflushed_changes_memused(msp));
        spa->spa_unflushed_stats.sus_memused -=
            metaslab_unflushed_changes_memused(msp);
        range_tree_vacate(msp->ms_unflushed_allocs, NULL, NULL);
        range_tree_vacate(msp->ms_unflushed_frees, NULL, NULL);

        metaslab_verify_space(msp, dmu_tx_get_txg(tx));
        metaslab_verify_weight_and_frag(msp);

        metaslab_flush_update(msp, tx);

        metaslab_verify_space(msp, dmu_tx_get_txg(tx));
        metaslab_verify_weight_and_frag(msp);

        msp->ms_flushing = B_FALSE;
        cv_broadcast(&msp->ms_flush_cv);
        return (B_TRUE);
}

/*
 * Write a metaslab to disk in the context of the specified transaction group.
 */
void
metaslab_sync(metaslab_t *msp, uint64_t txg)
{
        metaslab_group_t *mg = msp->ms_group;
        vdev_t *vd = mg->mg_vd;
        spa_t *spa = vd->vdev_spa;
        objset_t *mos = spa_meta_objset(spa);
        range_tree_t *alloctree = msp->ms_allocating[txg & TXG_MASK];
        dmu_tx_t *tx;

        ASSERT(!vd->vdev_ishole);

        /*
         * This metaslab has just been added so there's no work to do now.
         */
        if (msp->ms_new) {
                ASSERT0(range_tree_space(alloctree));
                ASSERT0(range_tree_space(msp->ms_freeing));
                ASSERT0(range_tree_space(msp->ms_freed));
                ASSERT0(range_tree_space(msp->ms_checkpointing));
                ASSERT0(range_tree_space(msp->ms_trim));
                return;
        }

        /*
         * Normally, we don't want to process a metaslab if there are no
         * allocations or frees to perform. However, if the metaslab is being
         * forced to condense, it's loaded and we're not beyond the final
         * dirty txg, we need to let it through. Not condensing beyond the
         * final dirty txg prevents an issue where metaslabs that need to be
         * condensed but were loaded for other reasons could cause a panic
         * here. By only checking the txg in that branch of the conditional,
         * we preserve the utility of the VERIFY statements in all other
         * cases.
         */
        if (range_tree_is_empty(alloctree) &&
            range_tree_is_empty(msp->ms_freeing) &&
            range_tree_is_empty(msp->ms_checkpointing) &&
            !(msp->ms_loaded && msp->ms_condense_wanted &&
            txg <= spa_final_dirty_txg(spa)))
                return;


        VERIFY3U(txg, <=, spa_final_dirty_txg(spa));

        /*
         * The only state that can actually be changing concurrently
         * with metaslab_sync() is the metaslab's ms_allocatable. No
         * other thread can be modifying this txg's alloc, freeing,
         * freed, or space_map_phys_t.  We drop ms_lock whenever we
         * could call into the DMU, because the DMU can call down to
         * us (e.g. via zio_free()) at any time.
         *
         * The spa_vdev_remove_thread() can be reading metaslab state
         * concurrently, and it is locked out by the ms_sync_lock.
         * Note that the ms_lock is insufficient for this, because it
         * is dropped by space_map_write().
         */
        tx = dmu_tx_create_assigned(spa_get_dsl(spa), txg);

        /*
         * Generate a log space map if one doesn't exist already.
         */
        spa_generate_syncing_log_sm(spa, tx);

        if (msp->ms_sm == NULL) {
                uint64_t new_object = space_map_alloc(mos,
                    spa_feature_is_enabled(spa, SPA_FEATURE_LOG_SPACEMAP) ?
                    zfs_metaslab_sm_blksz_with_log :
                    zfs_metaslab_sm_blksz_no_log, tx);
                VERIFY3U(new_object, !=, 0);

                dmu_write(mos, vd->vdev_ms_array, sizeof (uint64_t) *
                    msp->ms_id, sizeof (uint64_t), &new_object, tx);

                VERIFY0(space_map_open(&msp->ms_sm, mos, new_object,
                    msp->ms_start, msp->ms_size, vd->vdev_ashift));
                ASSERT(msp->ms_sm != NULL);

                ASSERT(range_tree_is_empty(msp->ms_unflushed_allocs));
                ASSERT(range_tree_is_empty(msp->ms_unflushed_frees));
                ASSERT0(metaslab_allocated_space(msp));
        }

        if (!range_tree_is_empty(msp->ms_checkpointing) &&
            vd->vdev_checkpoint_sm == NULL) {
                ASSERT(spa_has_checkpoint(spa));

                uint64_t new_object = space_map_alloc(mos,
                    zfs_vdev_standard_sm_blksz, tx);
                VERIFY3U(new_object, !=, 0);

                VERIFY0(space_map_open(&vd->vdev_checkpoint_sm,
                    mos, new_object, 0, vd->vdev_asize, vd->vdev_ashift));
                ASSERT3P(vd->vdev_checkpoint_sm, !=, NULL);

                /*
                 * We save the space map object as an entry in vdev_top_zap
                 * so it can be retrieved when the pool is reopened after an
                 * export or through zdb.
                 */
                VERIFY0(zap_add(vd->vdev_spa->spa_meta_objset,
                    vd->vdev_top_zap, VDEV_TOP_ZAP_POOL_CHECKPOINT_SM,
                    sizeof (new_object), 1, &new_object, tx));
        }

        mutex_enter(&msp->ms_sync_lock);
        mutex_enter(&msp->ms_lock);

        /*
         * Note: metaslab_condense() clears the space map's histogram.
         * Therefore we must verify and remove this histogram before
         * condensing.
         */
        metaslab_group_histogram_verify(mg);
        metaslab_class_histogram_verify(mg->mg_class);
        metaslab_group_histogram_remove(mg, msp);

        if (spa->spa_sync_pass == 1 && msp->ms_loaded &&
            metaslab_should_condense(msp))
                metaslab_condense(msp, tx);

        /*
         * We'll be going to disk to sync our space accounting, thus we
         * drop the ms_lock during that time so allocations coming from
         * open-context (ZIL) for future TXGs do not block.
         */
        mutex_exit(&msp->ms_lock);
        space_map_t *log_sm = spa_syncing_log_sm(spa);
        if (log_sm != NULL) {
                ASSERT(spa_feature_is_enabled(spa, SPA_FEATURE_LOG_SPACEMAP));
                if (metaslab_unflushed_txg(msp) == 0)
                        metaslab_unflushed_add(msp, tx);
                else if (!metaslab_unflushed_dirty(msp))
                        metaslab_unflushed_bump(msp, tx, B_TRUE);

                space_map_write(log_sm, alloctree, SM_ALLOC,
                    vd->vdev_id, tx);
                space_map_write(log_sm, msp->ms_freeing, SM_FREE,
                    vd->vdev_id, tx);
                mutex_enter(&msp->ms_lock);

                ASSERT3U(spa->spa_unflushed_stats.sus_memused, >=,
                    metaslab_unflushed_changes_memused(msp));
                spa->spa_unflushed_stats.sus_memused -=
                    metaslab_unflushed_changes_memused(msp);
                range_tree_remove_xor_add(alloctree,
                    msp->ms_unflushed_frees, msp->ms_unflushed_allocs);
                range_tree_remove_xor_add(msp->ms_freeing,
                    msp->ms_unflushed_allocs, msp->ms_unflushed_frees);
                spa->spa_unflushed_stats.sus_memused +=
                    metaslab_unflushed_changes_memused(msp);
        } else {
                ASSERT(!spa_feature_is_enabled(spa, SPA_FEATURE_LOG_SPACEMAP));

                space_map_write(msp->ms_sm, alloctree, SM_ALLOC,
                    SM_NO_VDEVID, tx);
                space_map_write(msp->ms_sm, msp->ms_freeing, SM_FREE,
                    SM_NO_VDEVID, tx);
                mutex_enter(&msp->ms_lock);
        }

        msp->ms_allocated_space += range_tree_space(alloctree);
        ASSERT3U(msp->ms_allocated_space, >=,
            range_tree_space(msp->ms_freeing));
        msp->ms_allocated_space -= range_tree_space(msp->ms_freeing);

        if (!range_tree_is_empty(msp->ms_checkpointing)) {
                ASSERT(spa_has_checkpoint(spa));
                ASSERT3P(vd->vdev_checkpoint_sm, !=, NULL);

                /*
                 * Since we are doing writes to disk and the ms_checkpointing
                 * tree won't be changing during that time, we drop the
                 * ms_lock while writing to the checkpoint space map, for the
                 * same reason mentioned above.
                 */
                mutex_exit(&msp->ms_lock);
                space_map_write(vd->vdev_checkpoint_sm,
                    msp->ms_checkpointing, SM_FREE, SM_NO_VDEVID, tx);
                mutex_enter(&msp->ms_lock);

                spa->spa_checkpoint_info.sci_dspace +=
                    range_tree_space(msp->ms_checkpointing);
                vd->vdev_stat.vs_checkpoint_space +=
                    range_tree_space(msp->ms_checkpointing);
                ASSERT3U(vd->vdev_stat.vs_checkpoint_space, ==,
                    -space_map_allocated(vd->vdev_checkpoint_sm));

                range_tree_vacate(msp->ms_checkpointing, NULL, NULL);
        }

        if (msp->ms_loaded) {
                /*
                 * When the space map is loaded, we have an accurate
                 * histogram in the range tree. This gives us an opportunity
                 * to bring the space map's histogram up-to-date so we clear
                 * it first before updating it.
                 */
                space_map_histogram_clear(msp->ms_sm);
                space_map_histogram_add(msp->ms_sm, msp->ms_allocatable, tx);

                /*
                 * Since we've cleared the histogram we need to add back
                 * any free space that has already been processed, plus
                 * any deferred space. This allows the on-disk histogram
                 * to accurately reflect all free space even if some space
                 * is not yet available for allocation (i.e. deferred).
                 */
                space_map_histogram_add(msp->ms_sm, msp->ms_freed, tx);

                /*
                 * Add back any deferred free space that has not been
                 * added back into the in-core free tree yet. This will
                 * ensure that we don't end up with a space map histogram
                 * that is completely empty unless the metaslab is fully
                 * allocated.
                 */
                for (int t = 0; t < TXG_DEFER_SIZE; t++) {
                        space_map_histogram_add(msp->ms_sm,
                            msp->ms_defer[t], tx);
                }
        }

        /*
         * Always add the free space from this sync pass to the space
         * map histogram. We want to make sure that the on-disk histogram
         * accounts for all free space. If the space map is not loaded,
         * then we will lose some accuracy but will correct it the next
         * time we load the space map.
         */
        space_map_histogram_add(msp->ms_sm, msp->ms_freeing, tx);
        metaslab_aux_histograms_update(msp);

        metaslab_group_histogram_add(mg, msp);
        metaslab_group_histogram_verify(mg);
        metaslab_class_histogram_verify(mg->mg_class);

        /*
         * For sync pass 1, we avoid traversing this txg's free range tree
         * and instead will just swap the pointers for freeing and freed.
         * We can safely do this since the freed_tree is guaranteed to be
         * empty on the initial pass.
         *
         * Keep in mind that even if we are currently using a log spacemap
         * we want current frees to end up in the ms_allocatable (but not
         * get appended to the ms_sm) so their ranges can be reused as usual.
         */
        if (spa_sync_pass(spa) == 1) {
                range_tree_swap(&msp->ms_freeing, &msp->ms_freed);
                ASSERT0(msp->ms_allocated_this_txg);
        } else {
                range_tree_vacate(msp->ms_freeing,
                    range_tree_add, msp->ms_freed);
        }
        msp->ms_allocated_this_txg += range_tree_space(alloctree);
        range_tree_vacate(alloctree, NULL, NULL);

        ASSERT0(range_tree_space(msp->ms_allocating[txg & TXG_MASK]));
        ASSERT0(range_tree_space(msp->ms_allocating[TXG_CLEAN(txg)
            & TXG_MASK]));
        ASSERT0(range_tree_space(msp->ms_freeing));
        ASSERT0(range_tree_space(msp->ms_checkpointing));

        mutex_exit(&msp->ms_lock);

        /*
         * Verify that the space map object ID has been recorded in the
         * vdev_ms_array.
         */
        uint64_t object;
        VERIFY0(dmu_read(mos, vd->vdev_ms_array,
            msp->ms_id * sizeof (uint64_t), sizeof (uint64_t), &object, 0));
        VERIFY3U(object, ==, space_map_object(msp->ms_sm));

        mutex_exit(&msp->ms_sync_lock);
        dmu_tx_commit(tx);
}

static void
metaslab_evict(metaslab_t *msp, uint64_t txg)
{
        if (!msp->ms_loaded || msp->ms_disabled != 0)
                return;

        for (int t = 1; t < TXG_CONCURRENT_STATES; t++) {
                VERIFY0(range_tree_space(
                    msp->ms_allocating[(txg + t) & TXG_MASK]));
        }
        if (msp->ms_allocator != -1)
                metaslab_passivate(msp, msp->ms_weight & ~METASLAB_ACTIVE_MASK);

        if (!metaslab_debug_unload)
                metaslab_unload(msp);
}

/*
 * Called after a transaction group has completely synced to mark
 * all of the metaslab's free space as usable.
 */
void
metaslab_sync_done(metaslab_t *msp, uint64_t txg)
{
        metaslab_group_t *mg = msp->ms_group;
        vdev_t *vd = mg->mg_vd;
        spa_t *spa = vd->vdev_spa;
        range_tree_t **defer_tree;
        int64_t alloc_delta, defer_delta;
        boolean_t defer_allowed = B_TRUE;

        ASSERT(!vd->vdev_ishole);

        mutex_enter(&msp->ms_lock);

        if (msp->ms_new) {
                /* this is a new metaslab, add its capacity to the vdev */
                metaslab_space_update(vd, mg->mg_class, 0, 0, msp->ms_size);

                /* there should be no allocations nor frees at this point */
                VERIFY0(msp->ms_allocated_this_txg);
                VERIFY0(range_tree_space(msp->ms_freed));
        }

        ASSERT0(range_tree_space(msp->ms_freeing));
        ASSERT0(range_tree_space(msp->ms_checkpointing));

        defer_tree = &msp->ms_defer[txg % TXG_DEFER_SIZE];

        uint64_t free_space = metaslab_class_get_space(spa_normal_class(spa)) -
            metaslab_class_get_alloc(spa_normal_class(spa));
        if (free_space <= spa_get_slop_space(spa) || vd->vdev_removing) {
                defer_allowed = B_FALSE;
        }

        defer_delta = 0;
        alloc_delta = msp->ms_allocated_this_txg -
            range_tree_space(msp->ms_freed);

        if (defer_allowed) {
                defer_delta = range_tree_space(msp->ms_freed) -
                    range_tree_space(*defer_tree);
        } else {
                defer_delta -= range_tree_space(*defer_tree);
        }
        metaslab_space_update(vd, mg->mg_class, alloc_delta + defer_delta,
            defer_delta, 0);

        if (spa_syncing_log_sm(spa) == NULL) {
                /*
                 * If there's a metaslab_load() in progress and we don't have
                 * a log space map, it means that we probably wrote to the
                 * metaslab's space map. If this is the case, we need to
                 * make sure that we wait for the load to complete so that we
                 * have a consistent view at the in-core side of the metaslab.
                 */
                metaslab_load_wait(msp);
        } else {
                ASSERT(spa_feature_is_active(spa, SPA_FEATURE_LOG_SPACEMAP));
        }

        /*
         * When auto-trimming is enabled, free ranges which are added to
         * ms_allocatable are also be added to ms_trim.  The ms_trim tree is
         * periodically consumed by the vdev_autotrim_thread() which issues
         * trims for all ranges and then vacates the tree.  The ms_trim tree
         * can be discarded at any time with the sole consequence of recent
         * frees not being trimmed.
         */
        if (spa_get_autotrim(spa) == SPA_AUTOTRIM_ON) {
                range_tree_walk(*defer_tree, range_tree_add, msp->ms_trim);
                if (!defer_allowed) {
                        range_tree_walk(msp->ms_freed, range_tree_add,
                            msp->ms_trim);
                }
        } else {
                range_tree_vacate(msp->ms_trim, NULL, NULL);
        }

        /*
         * Move the frees from the defer_tree back to the free
         * range tree (if it's loaded). Swap the freed_tree and
         * the defer_tree -- this is safe to do because we've
         * just emptied out the defer_tree.
         */
        range_tree_vacate(*defer_tree,
            msp->ms_loaded ? range_tree_add : NULL, msp->ms_allocatable);
        if (defer_allowed) {
                range_tree_swap(&msp->ms_freed, defer_tree);
        } else {
                range_tree_vacate(msp->ms_freed,
                    msp->ms_loaded ? range_tree_add : NULL,
                    msp->ms_allocatable);
        }

        msp->ms_synced_length = space_map_length(msp->ms_sm);

        msp->ms_deferspace += defer_delta;
        ASSERT3S(msp->ms_deferspace, >=, 0);
        ASSERT3S(msp->ms_deferspace, <=, msp->ms_size);
        if (msp->ms_deferspace != 0) {
                /*
                 * Keep syncing this metaslab until all deferred frees
                 * are back in circulation.
                 */
                vdev_dirty(vd, VDD_METASLAB, msp, txg + 1);
        }
        metaslab_aux_histograms_update_done(msp, defer_allowed);

        if (msp->ms_new) {
                msp->ms_new = B_FALSE;
                mutex_enter(&mg->mg_lock);
                mg->mg_ms_ready++;
                mutex_exit(&mg->mg_lock);
        }

        /*
         * Re-sort metaslab within its group now that we've adjusted
         * its allocatable space.
         */
        metaslab_recalculate_weight_and_sort(msp);

        ASSERT0(range_tree_space(msp->ms_allocating[txg & TXG_MASK]));
        ASSERT0(range_tree_space(msp->ms_freeing));
        ASSERT0(range_tree_space(msp->ms_freed));
        ASSERT0(range_tree_space(msp->ms_checkpointing));
        msp->ms_allocating_total -= msp->ms_allocated_this_txg;
        msp->ms_allocated_this_txg = 0;
        mutex_exit(&msp->ms_lock);
}

void
metaslab_sync_reassess(metaslab_group_t *mg)
{
        spa_t *spa = mg->mg_class->mc_spa;

        spa_config_enter(spa, SCL_ALLOC, FTAG, RW_READER);
        metaslab_group_alloc_update(mg);
        mg->mg_fragmentation = metaslab_group_fragmentation(mg);

        /*
         * Preload the next potential metaslabs but only on active
         * metaslab groups. We can get into a state where the metaslab
         * is no longer active since we dirty metaslabs as we remove a
         * a device, thus potentially making the metaslab group eligible
         * for preloading.
         */
        if (mg->mg_activation_count > 0) {
                metaslab_group_preload(mg);
        }
        spa_config_exit(spa, SCL_ALLOC, FTAG);
}

/*
 * When writing a ditto block (i.e. more than one DVA for a given BP) on
 * the same vdev as an existing DVA of this BP, then try to allocate it
 * on a different metaslab than existing DVAs (i.e. a unique metaslab).
 */
static boolean_t
metaslab_is_unique(metaslab_t *msp, dva_t *dva)
{
        uint64_t dva_ms_id;

        if (DVA_GET_ASIZE(dva) == 0)
                return (B_TRUE);

        if (msp->ms_group->mg_vd->vdev_id != DVA_GET_VDEV(dva))
                return (B_TRUE);

        dva_ms_id = DVA_GET_OFFSET(dva) >> msp->ms_group->mg_vd->vdev_ms_shift;

        return (msp->ms_id != dva_ms_id);
}

/*
 * ==========================================================================
 * Metaslab allocation tracing facility
 * ==========================================================================
 */

/*
 * Add an allocation trace element to the allocation tracing list.
 */
static void
metaslab_trace_add(zio_alloc_list_t *zal, metaslab_group_t *mg,
    metaslab_t *msp, uint64_t psize, uint32_t dva_id, uint64_t offset,
    int allocator)
{
        metaslab_alloc_trace_t *mat;

        if (!metaslab_trace_enabled)
                return;

        /*
         * When the tracing list reaches its maximum we remove
         * the second element in the list before adding a new one.
         * By removing the second element we preserve the original
         * entry as a clue to what allocations steps have already been
         * performed.
         */
        if (zal->zal_size == metaslab_trace_max_entries) {
                metaslab_alloc_trace_t *mat_next;
#ifdef ZFS_DEBUG
                panic("too many entries in allocation list");
#endif
                METASLABSTAT_BUMP(metaslabstat_trace_over_limit);
                zal->zal_size--;
                mat_next = list_next(&zal->zal_list, list_head(&zal->zal_list));
                list_remove(&zal->zal_list, mat_next);
                kmem_cache_free(metaslab_alloc_trace_cache, mat_next);
        }

        mat = kmem_cache_alloc(metaslab_alloc_trace_cache, KM_SLEEP);
        list_link_init(&mat->mat_list_node);
        mat->mat_mg = mg;
        mat->mat_msp = msp;
        mat->mat_size = psize;
        mat->mat_dva_id = dva_id;
        mat->mat_offset = offset;
        mat->mat_weight = 0;
        mat->mat_allocator = allocator;

        if (msp != NULL)
                mat->mat_weight = msp->ms_weight;

        /*
         * The list is part of the zio so locking is not required. Only
         * a single thread will perform allocations for a given zio.
         */
        list_insert_tail(&zal->zal_list, mat);
        zal->zal_size++;

        ASSERT3U(zal->zal_size, <=, metaslab_trace_max_entries);
}

void
metaslab_trace_init(zio_alloc_list_t *zal)
{
        list_create(&zal->zal_list, sizeof (metaslab_alloc_trace_t),
            offsetof(metaslab_alloc_trace_t, mat_list_node));
        zal->zal_size = 0;
}

void
metaslab_trace_fini(zio_alloc_list_t *zal)
{
        metaslab_alloc_trace_t *mat;

        while ((mat = list_remove_head(&zal->zal_list)) != NULL)
                kmem_cache_free(metaslab_alloc_trace_cache, mat);
        list_destroy(&zal->zal_list);
        zal->zal_size = 0;
}

/*
 * ==========================================================================
 * Metaslab block operations
 * ==========================================================================
 */

static void
metaslab_group_alloc_increment(spa_t *spa, uint64_t vdev, const void *tag,
    int flags, int allocator)
{
        if (!(flags & METASLAB_ASYNC_ALLOC) ||
            (flags & METASLAB_DONT_THROTTLE))
                return;

        metaslab_group_t *mg = vdev_lookup_top(spa, vdev)->vdev_mg;
        if (!mg->mg_class->mc_alloc_throttle_enabled)
                return;

        metaslab_group_allocator_t *mga = &mg->mg_allocator[allocator];
        (void) zfs_refcount_add(&mga->mga_alloc_queue_depth, tag);
}

static void
metaslab_group_increment_qdepth(metaslab_group_t *mg, int allocator)
{
        metaslab_group_allocator_t *mga = &mg->mg_allocator[allocator];
        metaslab_class_allocator_t *mca =
            &mg->mg_class->mc_allocator[allocator];
        uint64_t max = mg->mg_max_alloc_queue_depth;
        uint64_t cur = mga->mga_cur_max_alloc_queue_depth;
        while (cur < max) {
                if (atomic_cas_64(&mga->mga_cur_max_alloc_queue_depth,
                    cur, cur + 1) == cur) {
                        atomic_inc_64(&mca->mca_alloc_max_slots);
                        return;
                }
                cur = mga->mga_cur_max_alloc_queue_depth;
        }
}

void
metaslab_group_alloc_decrement(spa_t *spa, uint64_t vdev, const void *tag,
    int flags, int allocator, boolean_t io_complete)
{
        if (!(flags & METASLAB_ASYNC_ALLOC) ||
            (flags & METASLAB_DONT_THROTTLE))
                return;

        metaslab_group_t *mg = vdev_lookup_top(spa, vdev)->vdev_mg;
        if (!mg->mg_class->mc_alloc_throttle_enabled)
                return;

        metaslab_group_allocator_t *mga = &mg->mg_allocator[allocator];
        (void) zfs_refcount_remove(&mga->mga_alloc_queue_depth, tag);
        if (io_complete)
                metaslab_group_increment_qdepth(mg, allocator);
}

void
metaslab_group_alloc_verify(spa_t *spa, const blkptr_t *bp, const void *tag,
    int allocator)
{
#ifdef ZFS_DEBUG
        const dva_t *dva = bp->blk_dva;
        int ndvas = BP_GET_NDVAS(bp);

        for (int d = 0; d < ndvas; d++) {
                uint64_t vdev = DVA_GET_VDEV(&dva[d]);
                metaslab_group_t *mg = vdev_lookup_top(spa, vdev)->vdev_mg;
                metaslab_group_allocator_t *mga = &mg->mg_allocator[allocator];
                VERIFY(zfs_refcount_not_held(&mga->mga_alloc_queue_depth, tag));
        }
#endif
}

static uint64_t
metaslab_block_alloc(metaslab_t *msp, uint64_t size, uint64_t txg)
{
        uint64_t start;
        range_tree_t *rt = msp->ms_allocatable;
        metaslab_class_t *mc = msp->ms_group->mg_class;

        ASSERT(MUTEX_HELD(&msp->ms_lock));
        VERIFY(!msp->ms_condensing);
        VERIFY0(msp->ms_disabled);

        start = mc->mc_ops->msop_alloc(msp, size);
        if (start != -1ULL) {
                metaslab_group_t *mg = msp->ms_group;
                vdev_t *vd = mg->mg_vd;

                VERIFY0(P2PHASE(start, 1ULL << vd->vdev_ashift));
                VERIFY0(P2PHASE(size, 1ULL << vd->vdev_ashift));
                VERIFY3U(range_tree_space(rt) - size, <=, msp->ms_size);
                range_tree_remove(rt, start, size);
                range_tree_clear(msp->ms_trim, start, size);

                if (range_tree_is_empty(msp->ms_allocating[txg & TXG_MASK]))
                        vdev_dirty(mg->mg_vd, VDD_METASLAB, msp, txg);

                range_tree_add(msp->ms_allocating[txg & TXG_MASK], start, size);
                msp->ms_allocating_total += size;

                /* Track the last successful allocation */
                msp->ms_alloc_txg = txg;
                metaslab_verify_space(msp, txg);
        }

        /*
         * Now that we've attempted the allocation we need to update the
         * metaslab's maximum block size since it may have changed.
         */
        msp->ms_max_size = metaslab_largest_allocatable(msp);
        return (start);
}

/*
 * Find the metaslab with the highest weight that is less than what we've
 * already tried.  In the common case, this means that we will examine each
 * metaslab at most once. Note that concurrent callers could reorder metaslabs
 * by activation/passivation once we have dropped the mg_lock. If a metaslab is
 * activated by another thread, and we fail to allocate from the metaslab we
 * have selected, we may not try the newly-activated metaslab, and instead
 * activate another metaslab.  This is not optimal, but generally does not cause
 * any problems (a possible exception being if every metaslab is completely full
 * except for the newly-activated metaslab which we fail to examine).
 */
static metaslab_t *
find_valid_metaslab(metaslab_group_t *mg, uint64_t activation_weight,
    dva_t *dva, int d, boolean_t want_unique, uint64_t asize, int allocator,
    boolean_t try_hard, zio_alloc_list_t *zal, metaslab_t *search,
    boolean_t *was_active)
{
        avl_index_t idx;
        avl_tree_t *t = &mg->mg_metaslab_tree;
        metaslab_t *msp = avl_find(t, search, &idx);
        if (msp == NULL)
                msp = avl_nearest(t, idx, AVL_AFTER);

        uint_t tries = 0;
        for (; msp != NULL; msp = AVL_NEXT(t, msp)) {
                int i;

                if (!try_hard && tries > zfs_metaslab_find_max_tries) {
                        METASLABSTAT_BUMP(metaslabstat_too_many_tries);
                        return (NULL);
                }
                tries++;

                if (!metaslab_should_allocate(msp, asize, try_hard)) {
                        metaslab_trace_add(zal, mg, msp, asize, d,
                            TRACE_TOO_SMALL, allocator);
                        continue;
                }

                /*
                 * If the selected metaslab is condensing or disabled,
                 * skip it.
                 */
                if (msp->ms_condensing || msp->ms_disabled > 0)
                        continue;

                *was_active = msp->ms_allocator != -1;
                /*
                 * If we're activating as primary, this is our first allocation
                 * from this disk, so we don't need to check how close we are.
                 * If the metaslab under consideration was already active,
                 * we're getting desperate enough to steal another allocator's
                 * metaslab, so we still don't care about distances.
                 */
                if (activation_weight == METASLAB_WEIGHT_PRIMARY || *was_active)
                        break;

                for (i = 0; i < d; i++) {
                        if (want_unique &&
                            !metaslab_is_unique(msp, &dva[i]))
                                break;  /* try another metaslab */
                }
                if (i == d)
                        break;
        }

        if (msp != NULL) {
                search->ms_weight = msp->ms_weight;
                search->ms_start = msp->ms_start + 1;
                search->ms_allocator = msp->ms_allocator;
                search->ms_primary = msp->ms_primary;
        }
        return (msp);
}

static void
metaslab_active_mask_verify(metaslab_t *msp)
{
        ASSERT(MUTEX_HELD(&msp->ms_lock));

        if ((zfs_flags & ZFS_DEBUG_METASLAB_VERIFY) == 0)
                return;

        if ((msp->ms_weight & METASLAB_ACTIVE_MASK) == 0)
                return;

        if (msp->ms_weight & METASLAB_WEIGHT_PRIMARY) {
                VERIFY0(msp->ms_weight & METASLAB_WEIGHT_SECONDARY);
                VERIFY0(msp->ms_weight & METASLAB_WEIGHT_CLAIM);
                VERIFY3S(msp->ms_allocator, !=, -1);
                VERIFY(msp->ms_primary);
                return;
        }

        if (msp->ms_weight & METASLAB_WEIGHT_SECONDARY) {
                VERIFY0(msp->ms_weight & METASLAB_WEIGHT_PRIMARY);
                VERIFY0(msp->ms_weight & METASLAB_WEIGHT_CLAIM);
                VERIFY3S(msp->ms_allocator, !=, -1);
                VERIFY(!msp->ms_primary);
                return;
        }

        if (msp->ms_weight & METASLAB_WEIGHT_CLAIM) {
                VERIFY0(msp->ms_weight & METASLAB_WEIGHT_PRIMARY);
                VERIFY0(msp->ms_weight & METASLAB_WEIGHT_SECONDARY);
                VERIFY3S(msp->ms_allocator, ==, -1);
                return;
        }
}

static uint64_t
metaslab_group_alloc_normal(metaslab_group_t *mg, zio_alloc_list_t *zal,
    uint64_t asize, uint64_t txg, boolean_t want_unique, dva_t *dva, int d,
    int allocator, boolean_t try_hard)
{
        metaslab_t *msp = NULL;
        uint64_t offset = -1ULL;

        uint64_t activation_weight = METASLAB_WEIGHT_PRIMARY;
        for (int i = 0; i < d; i++) {
                if (activation_weight == METASLAB_WEIGHT_PRIMARY &&
                    DVA_GET_VDEV(&dva[i]) == mg->mg_vd->vdev_id) {
                        activation_weight = METASLAB_WEIGHT_SECONDARY;
                } else if (activation_weight == METASLAB_WEIGHT_SECONDARY &&
                    DVA_GET_VDEV(&dva[i]) == mg->mg_vd->vdev_id) {
                        activation_weight = METASLAB_WEIGHT_CLAIM;
                        break;
                }
        }

        /*
         * If we don't have enough metaslabs active to fill the entire array, we
         * just use the 0th slot.
         */
        if (mg->mg_ms_ready < mg->mg_allocators * 3)
                allocator = 0;
        metaslab_group_allocator_t *mga = &mg->mg_allocator[allocator];

        ASSERT3U(mg->mg_vd->vdev_ms_count, >=, 2);

        metaslab_t *search = kmem_alloc(sizeof (*search), KM_SLEEP);
        search->ms_weight = UINT64_MAX;
        search->ms_start = 0;
        /*
         * At the end of the metaslab tree are the already-active metaslabs,
         * first the primaries, then the secondaries. When we resume searching
         * through the tree, we need to consider ms_allocator and ms_primary so
         * we start in the location right after where we left off, and don't
         * accidentally loop forever considering the same metaslabs.
         */
        search->ms_allocator = -1;
        search->ms_primary = B_TRUE;
        for (;;) {
                boolean_t was_active = B_FALSE;

                mutex_enter(&mg->mg_lock);

                if (activation_weight == METASLAB_WEIGHT_PRIMARY &&
                    mga->mga_primary != NULL) {
                        msp = mga->mga_primary;

                        /*
                         * Even though we don't hold the ms_lock for the
                         * primary metaslab, those fields should not
                         * change while we hold the mg_lock. Thus it is
                         * safe to make assertions on them.
                         */
                        ASSERT(msp->ms_primary);
                        ASSERT3S(msp->ms_allocator, ==, allocator);
                        ASSERT(msp->ms_loaded);

                        was_active = B_TRUE;
                        ASSERT(msp->ms_weight & METASLAB_ACTIVE_MASK);
                } else if (activation_weight == METASLAB_WEIGHT_SECONDARY &&
                    mga->mga_secondary != NULL) {
                        msp = mga->mga_secondary;

                        /*
                         * See comment above about the similar assertions
                         * for the primary metaslab.
                         */
                        ASSERT(!msp->ms_primary);
                        ASSERT3S(msp->ms_allocator, ==, allocator);
                        ASSERT(msp->ms_loaded);

                        was_active = B_TRUE;
                        ASSERT(msp->ms_weight & METASLAB_ACTIVE_MASK);
                } else {
                        msp = find_valid_metaslab(mg, activation_weight, dva, d,
                            want_unique, asize, allocator, try_hard, zal,
                            search, &was_active);
                }

                mutex_exit(&mg->mg_lock);
                if (msp == NULL) {
                        kmem_free(search, sizeof (*search));
                        return (-1ULL);
                }
                mutex_enter(&msp->ms_lock);

                metaslab_active_mask_verify(msp);

                /*
                 * This code is disabled out because of issues with
                 * tracepoints in non-gpl kernel modules.
                 */
#if 0
                DTRACE_PROBE3(ms__activation__attempt,
                    metaslab_t *, msp, uint64_t, activation_weight,
                    boolean_t, was_active);
#endif

                /*
                 * Ensure that the metaslab we have selected is still
                 * capable of handling our request. It's possible that
                 * another thread may have changed the weight while we
                 * were blocked on the metaslab lock. We check the
                 * active status first to see if we need to set_selected_txg
                 * a new metaslab.
                 */
                if (was_active && !(msp->ms_weight & METASLAB_ACTIVE_MASK)) {
                        ASSERT3S(msp->ms_allocator, ==, -1);
                        mutex_exit(&msp->ms_lock);
                        continue;
                }

                /*
                 * If the metaslab was activated for another allocator
                 * while we were waiting in the ms_lock above, or it's
                 * a primary and we're seeking a secondary (or vice versa),
                 * we go back and select a new metaslab.
                 */
                if (!was_active && (msp->ms_weight & METASLAB_ACTIVE_MASK) &&
                    (msp->ms_allocator != -1) &&
                    (msp->ms_allocator != allocator || ((activation_weight ==
                    METASLAB_WEIGHT_PRIMARY) != msp->ms_primary))) {
                        ASSERT(msp->ms_loaded);
                        ASSERT((msp->ms_weight & METASLAB_WEIGHT_CLAIM) ||
                            msp->ms_allocator != -1);
                        mutex_exit(&msp->ms_lock);
                        continue;
                }

                /*
                 * This metaslab was used for claiming regions allocated
                 * by the ZIL during pool import. Once these regions are
                 * claimed we don't need to keep the CLAIM bit set
                 * anymore. Passivate this metaslab to zero its activation
                 * mask.
                 */
                if (msp->ms_weight & METASLAB_WEIGHT_CLAIM &&
                    activation_weight != METASLAB_WEIGHT_CLAIM) {
                        ASSERT(msp->ms_loaded);
                        ASSERT3S(msp->ms_allocator, ==, -1);
                        metaslab_passivate(msp, msp->ms_weight &
                            ~METASLAB_WEIGHT_CLAIM);
                        mutex_exit(&msp->ms_lock);
                        continue;
                }

                metaslab_set_selected_txg(msp, txg);

                int activation_error =
                    metaslab_activate(msp, allocator, activation_weight);
                metaslab_active_mask_verify(msp);

                /*
                 * If the metaslab was activated by another thread for
                 * another allocator or activation_weight (EBUSY), or it
                 * failed because another metaslab was assigned as primary
                 * for this allocator (EEXIST) we continue using this
                 * metaslab for our allocation, rather than going on to a
                 * worse metaslab (we waited for that metaslab to be loaded
                 * after all).
                 *
                 * If the activation failed due to an I/O error or ENOSPC we
                 * skip to the next metaslab.
                 */
                boolean_t activated;
                if (activation_error == 0) {
                        activated = B_TRUE;
                } else if (activation_error == EBUSY ||
                    activation_error == EEXIST) {
                        activated = B_FALSE;
                } else {
                        mutex_exit(&msp->ms_lock);
                        continue;
                }
                ASSERT(msp->ms_loaded);

                /*
                 * Now that we have the lock, recheck to see if we should
                 * continue to use this metaslab for this allocation. The
                 * the metaslab is now loaded so metaslab_should_allocate()
                 * can accurately determine if the allocation attempt should
                 * proceed.
                 */
                if (!metaslab_should_allocate(msp, asize, try_hard)) {
                        /* Passivate this metaslab and select a new one. */
                        metaslab_trace_add(zal, mg, msp, asize, d,
                            TRACE_TOO_SMALL, allocator);
                        goto next;
                }

                /*
                 * If this metaslab is currently condensing then pick again
                 * as we can't manipulate this metaslab until it's committed
                 * to disk. If this metaslab is being initialized, we shouldn't
                 * allocate from it since the allocated region might be
                 * overwritten after allocation.
                 */
                if (msp->ms_condensing) {
                        metaslab_trace_add(zal, mg, msp, asize, d,
                            TRACE_CONDENSING, allocator);
                        if (activated) {
                                metaslab_passivate(msp, msp->ms_weight &
                                    ~METASLAB_ACTIVE_MASK);
                        }
                        mutex_exit(&msp->ms_lock);
                        continue;
                } else if (msp->ms_disabled > 0) {
                        metaslab_trace_add(zal, mg, msp, asize, d,
                            TRACE_DISABLED, allocator);
                        if (activated) {
                                metaslab_passivate(msp, msp->ms_weight &
                                    ~METASLAB_ACTIVE_MASK);
                        }
                        mutex_exit(&msp->ms_lock);
                        continue;
                }

                offset = metaslab_block_alloc(msp, asize, txg);
                metaslab_trace_add(zal, mg, msp, asize, d, offset, allocator);

                if (offset != -1ULL) {
                        /* Proactively passivate the metaslab, if needed */
                        if (activated)
                                metaslab_segment_may_passivate(msp);
                        break;
                }
next:
                ASSERT(msp->ms_loaded);

                /*
                 * This code is disabled out because of issues with
                 * tracepoints in non-gpl kernel modules.
                 */
#if 0
                DTRACE_PROBE2(ms__alloc__failure, metaslab_t *, msp,
                    uint64_t, asize);
#endif

                /*
                 * We were unable to allocate from this metaslab so determine
                 * a new weight for this metaslab. Now that we have loaded
                 * the metaslab we can provide a better hint to the metaslab
                 * selector.
                 *
                 * For space-based metaslabs, we use the maximum block size.
                 * This information is only available when the metaslab
                 * is loaded and is more accurate than the generic free
                 * space weight that was calculated by metaslab_weight().
                 * This information allows us to quickly compare the maximum
                 * available allocation in the metaslab to the allocation
                 * size being requested.
                 *
                 * For segment-based metaslabs, determine the new weight
                 * based on the highest bucket in the range tree. We
                 * explicitly use the loaded segment weight (i.e. the range
                 * tree histogram) since it contains the space that is
                 * currently available for allocation and is accurate
                 * even within a sync pass.
                 */
                uint64_t weight;
                if (WEIGHT_IS_SPACEBASED(msp->ms_weight)) {
                        weight = metaslab_largest_allocatable(msp);
                        WEIGHT_SET_SPACEBASED(weight);
                } else {
                        weight = metaslab_weight_from_range_tree(msp);
                }

                if (activated) {
                        metaslab_passivate(msp, weight);
                } else {
                        /*
                         * For the case where we use the metaslab that is
                         * active for another allocator we want to make
                         * sure that we retain the activation mask.
                         *
                         * Note that we could attempt to use something like
                         * metaslab_recalculate_weight_and_sort() that
                         * retains the activation mask here. That function
                         * uses metaslab_weight() to set the weight though
                         * which is not as accurate as the calculations
                         * above.
                         */
                        weight |= msp->ms_weight & METASLAB_ACTIVE_MASK;
                        metaslab_group_sort(mg, msp, weight);
                }
                metaslab_active_mask_verify(msp);

                /*
                 * We have just failed an allocation attempt, check
                 * that metaslab_should_allocate() agrees. Otherwise,
                 * we may end up in an infinite loop retrying the same
                 * metaslab.
                 */
                ASSERT(!metaslab_should_allocate(msp, asize, try_hard));

                mutex_exit(&msp->ms_lock);
        }
        mutex_exit(&msp->ms_lock);
        kmem_free(search, sizeof (*search));
        return (offset);
}

static uint64_t
metaslab_group_alloc(metaslab_group_t *mg, zio_alloc_list_t *zal,
    uint64_t asize, uint64_t txg, boolean_t want_unique, dva_t *dva, int d,
    int allocator, boolean_t try_hard)
{
        uint64_t offset;
        ASSERT(mg->mg_initialized);

        offset = metaslab_group_alloc_normal(mg, zal, asize, txg, want_unique,
            dva, d, allocator, try_hard);

        mutex_enter(&mg->mg_lock);
        if (offset == -1ULL) {
                mg->mg_failed_allocations++;
                metaslab_trace_add(zal, mg, NULL, asize, d,
                    TRACE_GROUP_FAILURE, allocator);
                if (asize == SPA_GANGBLOCKSIZE) {
                        /*
                         * This metaslab group was unable to allocate
                         * the minimum gang block size so it must be out of
                         * space. We must notify the allocation throttle
                         * to start skipping allocation attempts to this
                         * metaslab group until more space becomes available.
                         * Note: this failure cannot be caused by the
                         * allocation throttle since the allocation throttle
                         * is only responsible for skipping devices and
                         * not failing block allocations.
                         */
                        mg->mg_no_free_space = B_TRUE;
                }
        }
        mg->mg_allocations++;
        mutex_exit(&mg->mg_lock);
        return (offset);
}

/*
 * Allocate a block for the specified i/o.
 */
int
metaslab_alloc_dva(spa_t *spa, metaslab_class_t *mc, uint64_t psize,
    dva_t *dva, int d, dva_t *hintdva, uint64_t txg, int flags,
    zio_alloc_list_t *zal, int allocator)
{
        metaslab_class_allocator_t *mca = &mc->mc_allocator[allocator];
        metaslab_group_t *mg, *fast_mg, *rotor;
        vdev_t *vd;
        boolean_t try_hard = B_FALSE;

        ASSERT(!DVA_IS_VALID(&dva[d]));

        /*
         * For testing, make some blocks above a certain size be gang blocks.
         * This will result in more split blocks when using device removal,
         * and a large number of split blocks coupled with ztest-induced
         * damage can result in extremely long reconstruction times.  This
         * will also test spilling from special to normal.
         */
        if (psize >= metaslab_force_ganging && (random_in_range(100) < 3)) {
                metaslab_trace_add(zal, NULL, NULL, psize, d, TRACE_FORCE_GANG,
                    allocator);
                return (SET_ERROR(ENOSPC));
        }

        /*
         * Start at the rotor and loop through all mgs until we find something.
         * Note that there's no locking on mca_rotor or mca_aliquot because
         * nothing actually breaks if we miss a few updates -- we just won't
         * allocate quite as evenly.  It all balances out over time.
         *
         * If we are doing ditto or log blocks, try to spread them across
         * consecutive vdevs.  If we're forced to reuse a vdev before we've
         * allocated all of our ditto blocks, then try and spread them out on
         * that vdev as much as possible.  If it turns out to not be possible,
         * gradually lower our standards until anything becomes acceptable.
         * Also, allocating on consecutive vdevs (as opposed to random vdevs)
         * gives us hope of containing our fault domains to something we're
         * able to reason about.  Otherwise, any two top-level vdev failures
         * will guarantee the loss of data.  With consecutive allocation,
         * only two adjacent top-level vdev failures will result in data loss.
         *
         * If we are doing gang blocks (hintdva is non-NULL), try to keep
         * ourselves on the same vdev as our gang block header.  That
         * way, we can hope for locality in vdev_cache, plus it makes our
         * fault domains something tractable.
         */
        if (hintdva) {
                vd = vdev_lookup_top(spa, DVA_GET_VDEV(&hintdva[d]));

                /*
                 * It's possible the vdev we're using as the hint no
                 * longer exists or its mg has been closed (e.g. by
                 * device removal).  Consult the rotor when
                 * all else fails.
                 */
                if (vd != NULL && vd->vdev_mg != NULL) {
                        mg = vdev_get_mg(vd, mc);

                        if (flags & METASLAB_HINTBP_AVOID)
                                mg = mg->mg_next;
                } else {
                        mg = mca->mca_rotor;
                }
        } else if (d != 0) {
                vd = vdev_lookup_top(spa, DVA_GET_VDEV(&dva[d - 1]));
                mg = vd->vdev_mg->mg_next;
        } else if (flags & METASLAB_FASTWRITE) {
                mg = fast_mg = mca->mca_rotor;

                do {
                        if (fast_mg->mg_vd->vdev_pending_fastwrite <
                            mg->mg_vd->vdev_pending_fastwrite)
                                mg = fast_mg;
                } while ((fast_mg = fast_mg->mg_next) != mca->mca_rotor);

        } else {
                ASSERT(mca->mca_rotor != NULL);
                mg = mca->mca_rotor;
        }

        /*
         * If the hint put us into the wrong metaslab class, or into a
         * metaslab group that has been passivated, just follow the rotor.
         */
        if (mg->mg_class != mc || mg->mg_activation_count <= 0)
                mg = mca->mca_rotor;

        rotor = mg;
top:
        do {
                boolean_t allocatable;

                ASSERT(mg->mg_activation_count == 1);
                vd = mg->mg_vd;

                /*
                 * Don't allocate from faulted devices.
                 */
                if (try_hard) {
                        spa_config_enter(spa, SCL_ZIO, FTAG, RW_READER);
                        allocatable = vdev_allocatable(vd);
                        spa_config_exit(spa, SCL_ZIO, FTAG);
                } else {
                        allocatable = vdev_allocatable(vd);
                }

                /*
                 * Determine if the selected metaslab group is eligible
                 * for allocations. If we're ganging then don't allow
                 * this metaslab group to skip allocations since that would
                 * inadvertently return ENOSPC and suspend the pool
                 * even though space is still available.
                 */
                if (allocatable && !GANG_ALLOCATION(flags) && !try_hard) {
                        allocatable = metaslab_group_allocatable(mg, rotor,
                            flags, psize, allocator, d);
                }

                if (!allocatable) {
                        metaslab_trace_add(zal, mg, NULL, psize, d,
                            TRACE_NOT_ALLOCATABLE, allocator);
                        goto next;
                }

                ASSERT(mg->mg_initialized);

                /*
                 * Avoid writing single-copy data to an unhealthy,
                 * non-redundant vdev, unless we've already tried all
                 * other vdevs.
                 */
                if (vd->vdev_state < VDEV_STATE_HEALTHY &&
                    d == 0 && !try_hard && vd->vdev_children == 0) {
                        metaslab_trace_add(zal, mg, NULL, psize, d,
                            TRACE_VDEV_ERROR, allocator);
                        goto next;
                }

                ASSERT(mg->mg_class == mc);

                uint64_t asize = vdev_psize_to_asize(vd, psize);
                ASSERT(P2PHASE(asize, 1ULL << vd->vdev_ashift) == 0);

                /*
                 * If we don't need to try hard, then require that the
                 * block be on a different metaslab from any other DVAs
                 * in this BP (unique=true).  If we are trying hard, then
                 * allow any metaslab to be used (unique=false).
                 */
                uint64_t offset = metaslab_group_alloc(mg, zal, asize, txg,
                    !try_hard, dva, d, allocator, try_hard);

                if (offset != -1ULL) {
                        /*
                         * If we've just selected this metaslab group,
                         * figure out whether the corresponding vdev is
                         * over- or under-used relative to the pool,
                         * and set an allocation bias to even it out.
                         *
                         * Bias is also used to compensate for unequally
                         * sized vdevs so that space is allocated fairly.
                         */
                        if (mca->mca_aliquot == 0 && metaslab_bias_enabled) {
                                vdev_stat_t *vs = &vd->vdev_stat;
                                int64_t vs_free = vs->vs_space - vs->vs_alloc;
                                int64_t mc_free = mc->mc_space - mc->mc_alloc;
                                int64_t ratio;

                                /*
                                 * Calculate how much more or less we should
                                 * try to allocate from this device during
                                 * this iteration around the rotor.
                                 *
                                 * This basically introduces a zero-centered
                                 * bias towards the devices with the most
                                 * free space, while compensating for vdev
                                 * size differences.
                                 *
                                 * Examples:
                                 *  vdev V1 = 16M/128M
                                 *  vdev V2 = 16M/128M
                                 *  ratio(V1) = 100% ratio(V2) = 100%
                                 *
                                 *  vdev V1 = 16M/128M
                                 *  vdev V2 = 64M/128M
                                 *  ratio(V1) = 127% ratio(V2) =  72%
                                 *
                                 *  vdev V1 = 16M/128M
                                 *  vdev V2 = 64M/512M
                                 *  ratio(V1) =  40% ratio(V2) = 160%
                                 */
                                ratio = (vs_free * mc->mc_alloc_groups * 100) /
                                    (mc_free + 1);
                                mg->mg_bias = ((ratio - 100) *
                                    (int64_t)mg->mg_aliquot) / 100;
                        } else if (!metaslab_bias_enabled) {
                                mg->mg_bias = 0;
                        }

                        if ((flags & METASLAB_FASTWRITE) ||
                            atomic_add_64_nv(&mca->mca_aliquot, asize) >=
                            mg->mg_aliquot + mg->mg_bias) {
                                mca->mca_rotor = mg->mg_next;
                                mca->mca_aliquot = 0;
                        }

                        DVA_SET_VDEV(&dva[d], vd->vdev_id);
                        DVA_SET_OFFSET(&dva[d], offset);
                        DVA_SET_GANG(&dva[d],
                            ((flags & METASLAB_GANG_HEADER) ? 1 : 0));
                        DVA_SET_ASIZE(&dva[d], asize);

                        if (flags & METASLAB_FASTWRITE) {
                                atomic_add_64(&vd->vdev_pending_fastwrite,
                                    psize);
                        }

                        return (0);
                }
next:
                mca->mca_rotor = mg->mg_next;
                mca->mca_aliquot = 0;
        } while ((mg = mg->mg_next) != rotor);

        /*
         * If we haven't tried hard, perhaps do so now.
         */
        if (!try_hard && (zfs_metaslab_try_hard_before_gang ||
            GANG_ALLOCATION(flags) || (flags & METASLAB_ZIL) != 0 ||
            psize <= 1 << spa->spa_min_ashift)) {
                METASLABSTAT_BUMP(metaslabstat_try_hard);
                try_hard = B_TRUE;
                goto top;
        }

        memset(&dva[d], 0, sizeof (dva_t));

        metaslab_trace_add(zal, rotor, NULL, psize, d, TRACE_ENOSPC, allocator);
        return (SET_ERROR(ENOSPC));
}

void
metaslab_free_concrete(vdev_t *vd, uint64_t offset, uint64_t asize,
    boolean_t checkpoint)
{
        metaslab_t *msp;
        spa_t *spa = vd->vdev_spa;

        ASSERT(vdev_is_concrete(vd));
        ASSERT3U(spa_config_held(spa, SCL_ALL, RW_READER), !=, 0);
        ASSERT3U(offset >> vd->vdev_ms_shift, <, vd->vdev_ms_count);

        msp = vd->vdev_ms[offset >> vd->vdev_ms_shift];

        VERIFY(!msp->ms_condensing);
        VERIFY3U(offset, >=, msp->ms_start);
        VERIFY3U(offset + asize, <=, msp->ms_start + msp->ms_size);
        VERIFY0(P2PHASE(offset, 1ULL << vd->vdev_ashift));
        VERIFY0(P2PHASE(asize, 1ULL << vd->vdev_ashift));

        metaslab_check_free_impl(vd, offset, asize);

        mutex_enter(&msp->ms_lock);
        if (range_tree_is_empty(msp->ms_freeing) &&
            range_tree_is_empty(msp->ms_checkpointing)) {
                vdev_dirty(vd, VDD_METASLAB, msp, spa_syncing_txg(spa));
        }

        if (checkpoint) {
                ASSERT(spa_has_checkpoint(spa));
                range_tree_add(msp->ms_checkpointing, offset, asize);
        } else {
                range_tree_add(msp->ms_freeing, offset, asize);
        }
        mutex_exit(&msp->ms_lock);
}

void
metaslab_free_impl_cb(uint64_t inner_offset, vdev_t *vd, uint64_t offset,
    uint64_t size, void *arg)
{
        (void) inner_offset;
        boolean_t *checkpoint = arg;

        ASSERT3P(checkpoint, !=, NULL);

        if (vd->vdev_ops->vdev_op_remap != NULL)
                vdev_indirect_mark_obsolete(vd, offset, size);
        else
                metaslab_free_impl(vd, offset, size, *checkpoint);
}

static void
metaslab_free_impl(vdev_t *vd, uint64_t offset, uint64_t size,
    boolean_t checkpoint)
{
        spa_t *spa = vd->vdev_spa;

        ASSERT3U(spa_config_held(spa, SCL_ALL, RW_READER), !=, 0);

        if (spa_syncing_txg(spa) > spa_freeze_txg(spa))
                return;

        if (spa->spa_vdev_removal != NULL &&
            spa->spa_vdev_removal->svr_vdev_id == vd->vdev_id &&
            vdev_is_concrete(vd)) {
                /*
                 * Note: we check if the vdev is concrete because when
                 * we complete the removal, we first change the vdev to be
                 * an indirect vdev (in open context), and then (in syncing
                 * context) clear spa_vdev_removal.
                 */
                free_from_removing_vdev(vd, offset, size);
        } else if (vd->vdev_ops->vdev_op_remap != NULL) {
                vdev_indirect_mark_obsolete(vd, offset, size);
                vd->vdev_ops->vdev_op_remap(vd, offset, size,
                    metaslab_free_impl_cb, &checkpoint);
        } else {
                metaslab_free_concrete(vd, offset, size, checkpoint);
        }
}

typedef struct remap_blkptr_cb_arg {
        blkptr_t *rbca_bp;
        spa_remap_cb_t rbca_cb;
        vdev_t *rbca_remap_vd;
        uint64_t rbca_remap_offset;
        void *rbca_cb_arg;
} remap_blkptr_cb_arg_t;

static void
remap_blkptr_cb(uint64_t inner_offset, vdev_t *vd, uint64_t offset,
    uint64_t size, void *arg)
{
        remap_blkptr_cb_arg_t *rbca = arg;
        blkptr_t *bp = rbca->rbca_bp;

        /* We can not remap split blocks. */
        if (size != DVA_GET_ASIZE(&bp->blk_dva[0]))
                return;
        ASSERT0(inner_offset);

        if (rbca->rbca_cb != NULL) {
                /*
                 * At this point we know that we are not handling split
                 * blocks and we invoke the callback on the previous
                 * vdev which must be indirect.
                 */
                ASSERT3P(rbca->rbca_remap_vd->vdev_ops, ==, &vdev_indirect_ops);

                rbca->rbca_cb(rbca->rbca_remap_vd->vdev_id,
                    rbca->rbca_remap_offset, size, rbca->rbca_cb_arg);

                /* set up remap_blkptr_cb_arg for the next call */
                rbca->rbca_remap_vd = vd;
                rbca->rbca_remap_offset = offset;
        }

        /*
         * The phys birth time is that of dva[0].  This ensures that we know
         * when each dva was written, so that resilver can determine which
         * blocks need to be scrubbed (i.e. those written during the time
         * the vdev was offline).  It also ensures that the key used in
         * the ARC hash table is unique (i.e. dva[0] + phys_birth).  If
         * we didn't change the phys_birth, a lookup in the ARC for a
         * remapped BP could find the data that was previously stored at
         * this vdev + offset.
         */
        vdev_t *oldvd = vdev_lookup_top(vd->vdev_spa,
            DVA_GET_VDEV(&bp->blk_dva[0]));
        vdev_indirect_births_t *vib = oldvd->vdev_indirect_births;
        bp->blk_phys_birth = vdev_indirect_births_physbirth(vib,
            DVA_GET_OFFSET(&bp->blk_dva[0]), DVA_GET_ASIZE(&bp->blk_dva[0]));

        DVA_SET_VDEV(&bp->blk_dva[0], vd->vdev_id);
        DVA_SET_OFFSET(&bp->blk_dva[0], offset);
}

/*
 * If the block pointer contains any indirect DVAs, modify them to refer to
 * concrete DVAs.  Note that this will sometimes not be possible, leaving
 * the indirect DVA in place.  This happens if the indirect DVA spans multiple
 * segments in the mapping (i.e. it is a "split block").
 *
 * If the BP was remapped, calls the callback on the original dva (note the
 * callback can be called multiple times if the original indirect DVA refers
 * to another indirect DVA, etc).
 *
 * Returns TRUE if the BP was remapped.
 */
boolean_t
spa_remap_blkptr(spa_t *spa, blkptr_t *bp, spa_remap_cb_t callback, void *arg)
{
        remap_blkptr_cb_arg_t rbca;

        if (!zfs_remap_blkptr_enable)
                return (B_FALSE);

        if (!spa_feature_is_enabled(spa, SPA_FEATURE_OBSOLETE_COUNTS))
                return (B_FALSE);

        /*
         * Dedup BP's can not be remapped, because ddt_phys_select() depends
         * on DVA[0] being the same in the BP as in the DDT (dedup table).
         */
        if (BP_GET_DEDUP(bp))
                return (B_FALSE);

        /*
         * Gang blocks can not be remapped, because
         * zio_checksum_gang_verifier() depends on the DVA[0] that's in
         * the BP used to read the gang block header (GBH) being the same
         * as the DVA[0] that we allocated for the GBH.
         */
        if (BP_IS_GANG(bp))
                return (B_FALSE);

        /*
         * Embedded BP's have no DVA to remap.
         */
        if (BP_GET_NDVAS(bp) < 1)
                return (B_FALSE);

        /*
         * Note: we only remap dva[0].  If we remapped other dvas, we
         * would no longer know what their phys birth txg is.
         */
        dva_t *dva = &bp->blk_dva[0];

        uint64_t offset = DVA_GET_OFFSET(dva);
        uint64_t size = DVA_GET_ASIZE(dva);
        vdev_t *vd = vdev_lookup_top(spa, DVA_GET_VDEV(dva));

        if (vd->vdev_ops->vdev_op_remap == NULL)
                return (B_FALSE);

        rbca.rbca_bp = bp;
        rbca.rbca_cb = callback;
        rbca.rbca_remap_vd = vd;
        rbca.rbca_remap_offset = offset;
        rbca.rbca_cb_arg = arg;

        /*
         * remap_blkptr_cb() will be called in order for each level of
         * indirection, until a concrete vdev is reached or a split block is
         * encountered. old_vd and old_offset are updated within the callback
         * as we go from the one indirect vdev to the next one (either concrete
         * or indirect again) in that order.
         */
        vd->vdev_ops->vdev_op_remap(vd, offset, size, remap_blkptr_cb, &rbca);

        /* Check if the DVA wasn't remapped because it is a split block */
        if (DVA_GET_VDEV(&rbca.rbca_bp->blk_dva[0]) == vd->vdev_id)
                return (B_FALSE);

        return (B_TRUE);
}

/*
 * Undo the allocation of a DVA which happened in the given transaction group.
 */
void
metaslab_unalloc_dva(spa_t *spa, const dva_t *dva, uint64_t txg)
{
        metaslab_t *msp;
        vdev_t *vd;
        uint64_t vdev = DVA_GET_VDEV(dva);
        uint64_t offset = DVA_GET_OFFSET(dva);
        uint64_t size = DVA_GET_ASIZE(dva);

        ASSERT(DVA_IS_VALID(dva));
        ASSERT3U(spa_config_held(spa, SCL_ALL, RW_READER), !=, 0);

        if (txg > spa_freeze_txg(spa))
                return;

        if ((vd = vdev_lookup_top(spa, vdev)) == NULL || !DVA_IS_VALID(dva) ||
            (offset >> vd->vdev_ms_shift) >= vd->vdev_ms_count) {
                zfs_panic_recover("metaslab_free_dva(): bad DVA %llu:%llu:%llu",
                    (u_longlong_t)vdev, (u_longlong_t)offset,
                    (u_longlong_t)size);
                return;
        }

        ASSERT(!vd->vdev_removing);
        ASSERT(vdev_is_concrete(vd));
        ASSERT0(vd->vdev_indirect_config.vic_mapping_object);
        ASSERT3P(vd->vdev_indirect_mapping, ==, NULL);

        if (DVA_GET_GANG(dva))
                size = vdev_gang_header_asize(vd);

        msp = vd->vdev_ms[offset >> vd->vdev_ms_shift];

        mutex_enter(&msp->ms_lock);
        range_tree_remove(msp->ms_allocating[txg & TXG_MASK],
            offset, size);
        msp->ms_allocating_total -= size;

        VERIFY(!msp->ms_condensing);
        VERIFY3U(offset, >=, msp->ms_start);
        VERIFY3U(offset + size, <=, msp->ms_start + msp->ms_size);
        VERIFY3U(range_tree_space(msp->ms_allocatable) + size, <=,
            msp->ms_size);
        VERIFY0(P2PHASE(offset, 1ULL << vd->vdev_ashift));
        VERIFY0(P2PHASE(size, 1ULL << vd->vdev_ashift));
        range_tree_add(msp->ms_allocatable, offset, size);
        mutex_exit(&msp->ms_lock);
}

/*
 * Free the block represented by the given DVA.
 */
void
metaslab_free_dva(spa_t *spa, const dva_t *dva, boolean_t checkpoint)
{
        uint64_t vdev = DVA_GET_VDEV(dva);
        uint64_t offset = DVA_GET_OFFSET(dva);
        uint64_t size = DVA_GET_ASIZE(dva);
        vdev_t *vd = vdev_lookup_top(spa, vdev);

        ASSERT(DVA_IS_VALID(dva));
        ASSERT3U(spa_config_held(spa, SCL_ALL, RW_READER), !=, 0);

        if (DVA_GET_GANG(dva)) {
                size = vdev_gang_header_asize(vd);
        }

        metaslab_free_impl(vd, offset, size, checkpoint);
}

/*
 * Reserve some allocation slots. The reservation system must be called
 * before we call into the allocator. If there aren't any available slots
 * then the I/O will be throttled until an I/O completes and its slots are
 * freed up. The function returns true if it was successful in placing
 * the reservation.
 */
boolean_t
metaslab_class_throttle_reserve(metaslab_class_t *mc, int slots, int allocator,
    zio_t *zio, int flags)
{
        metaslab_class_allocator_t *mca = &mc->mc_allocator[allocator];
        uint64_t max = mca->mca_alloc_max_slots;

        ASSERT(mc->mc_alloc_throttle_enabled);
        if (GANG_ALLOCATION(flags) || (flags & METASLAB_MUST_RESERVE) ||
            zfs_refcount_count(&mca->mca_alloc_slots) + slots <= max) {
                /*
                 * The potential race between _count() and _add() is covered
                 * by the allocator lock in most cases, or irrelevant due to
                 * GANG_ALLOCATION() or METASLAB_MUST_RESERVE set in others.
                 * But even if we assume some other non-existing scenario, the
                 * worst that can happen is few more I/Os get to allocation
                 * earlier, that is not a problem.
                 *
                 * We reserve the slots individually so that we can unreserve
                 * them individually when an I/O completes.
                 */
                zfs_refcount_add_few(&mca->mca_alloc_slots, slots, zio);
                zio->io_flags |= ZIO_FLAG_IO_ALLOCATING;
                return (B_TRUE);
        }
        return (B_FALSE);
}

void
metaslab_class_throttle_unreserve(metaslab_class_t *mc, int slots,
    int allocator, zio_t *zio)
{
        metaslab_class_allocator_t *mca = &mc->mc_allocator[allocator];

        ASSERT(mc->mc_alloc_throttle_enabled);
        zfs_refcount_remove_few(&mca->mca_alloc_slots, slots, zio);
}

static int
metaslab_claim_concrete(vdev_t *vd, uint64_t offset, uint64_t size,
    uint64_t txg)
{
        metaslab_t *msp;
        spa_t *spa = vd->vdev_spa;
        int error = 0;

        if (offset >> vd->vdev_ms_shift >= vd->vdev_ms_count)
                return (SET_ERROR(ENXIO));

        ASSERT3P(vd->vdev_ms, !=, NULL);
        msp = vd->vdev_ms[offset >> vd->vdev_ms_shift];

        mutex_enter(&msp->ms_lock);

        if ((txg != 0 && spa_writeable(spa)) || !msp->ms_loaded) {
                error = metaslab_activate(msp, 0, METASLAB_WEIGHT_CLAIM);
                if (error == EBUSY) {
                        ASSERT(msp->ms_loaded);
                        ASSERT(msp->ms_weight & METASLAB_ACTIVE_MASK);
                        error = 0;
                }
        }

        if (error == 0 &&
            !range_tree_contains(msp->ms_allocatable, offset, size))
                error = SET_ERROR(ENOENT);

        if (error || txg == 0) {        /* txg == 0 indicates dry run */
                mutex_exit(&msp->ms_lock);
                return (error);
        }

        VERIFY(!msp->ms_condensing);
        VERIFY0(P2PHASE(offset, 1ULL << vd->vdev_ashift));
        VERIFY0(P2PHASE(size, 1ULL << vd->vdev_ashift));
        VERIFY3U(range_tree_space(msp->ms_allocatable) - size, <=,
            msp->ms_size);
        range_tree_remove(msp->ms_allocatable, offset, size);
        range_tree_clear(msp->ms_trim, offset, size);

        if (spa_writeable(spa)) {       /* don't dirty if we're zdb(8) */
                metaslab_class_t *mc = msp->ms_group->mg_class;
                multilist_sublist_t *mls =
                    multilist_sublist_lock_obj(&mc->mc_metaslab_txg_list, msp);
                if (!multilist_link_active(&msp->ms_class_txg_node)) {
                        msp->ms_selected_txg = txg;
                        multilist_sublist_insert_head(mls, msp);
                }
                multilist_sublist_unlock(mls);

                if (range_tree_is_empty(msp->ms_allocating[txg & TXG_MASK]))
                        vdev_dirty(vd, VDD_METASLAB, msp, txg);
                range_tree_add(msp->ms_allocating[txg & TXG_MASK],
                    offset, size);
                msp->ms_allocating_total += size;
        }

        mutex_exit(&msp->ms_lock);

        return (0);
}

typedef struct metaslab_claim_cb_arg_t {
        uint64_t        mcca_txg;
        int             mcca_error;
} metaslab_claim_cb_arg_t;

static void
metaslab_claim_impl_cb(uint64_t inner_offset, vdev_t *vd, uint64_t offset,
    uint64_t size, void *arg)
{
        (void) inner_offset;
        metaslab_claim_cb_arg_t *mcca_arg = arg;

        if (mcca_arg->mcca_error == 0) {
                mcca_arg->mcca_error = metaslab_claim_concrete(vd, offset,
                    size, mcca_arg->mcca_txg);
        }
}

int
metaslab_claim_impl(vdev_t *vd, uint64_t offset, uint64_t size, uint64_t txg)
{
        if (vd->vdev_ops->vdev_op_remap != NULL) {
                metaslab_claim_cb_arg_t arg;

                /*
                 * Only zdb(8) can claim on indirect vdevs.  This is used
                 * to detect leaks of mapped space (that are not accounted
                 * for in the obsolete counts, spacemap, or bpobj).
                 */
                ASSERT(!spa_writeable(vd->vdev_spa));
                arg.mcca_error = 0;
                arg.mcca_txg = txg;

                vd->vdev_ops->vdev_op_remap(vd, offset, size,
                    metaslab_claim_impl_cb, &arg);

                if (arg.mcca_error == 0) {
                        arg.mcca_error = metaslab_claim_concrete(vd,
                            offset, size, txg);
                }
                return (arg.mcca_error);
        } else {
                return (metaslab_claim_concrete(vd, offset, size, txg));
        }
}

/*
 * Intent log support: upon opening the pool after a crash, notify the SPA
 * of blocks that the intent log has allocated for immediate write, but
 * which are still considered free by the SPA because the last transaction
 * group didn't commit yet.
 */
static int
metaslab_claim_dva(spa_t *spa, const dva_t *dva, uint64_t txg)
{
        uint64_t vdev = DVA_GET_VDEV(dva);
        uint64_t offset = DVA_GET_OFFSET(dva);
        uint64_t size = DVA_GET_ASIZE(dva);
        vdev_t *vd;

        if ((vd = vdev_lookup_top(spa, vdev)) == NULL) {
                return (SET_ERROR(ENXIO));
        }

        ASSERT(DVA_IS_VALID(dva));

        if (DVA_GET_GANG(dva))
                size = vdev_gang_header_asize(vd);

        return (metaslab_claim_impl(vd, offset, size, txg));
}

int
metaslab_alloc(spa_t *spa, metaslab_class_t *mc, uint64_t psize, blkptr_t *bp,
    int ndvas, uint64_t txg, blkptr_t *hintbp, int flags,
    zio_alloc_list_t *zal, zio_t *zio, int allocator)
{
        dva_t *dva = bp->blk_dva;
        dva_t *hintdva = (hintbp != NULL) ? hintbp->blk_dva : NULL;
        int error = 0;

        ASSERT(bp->blk_birth == 0);
        ASSERT(BP_PHYSICAL_BIRTH(bp) == 0);

        spa_config_enter(spa, SCL_ALLOC, FTAG, RW_READER);

        if (mc->mc_allocator[allocator].mca_rotor == NULL) {
                /* no vdevs in this class */
                spa_config_exit(spa, SCL_ALLOC, FTAG);
                return (SET_ERROR(ENOSPC));
        }

        ASSERT(ndvas > 0 && ndvas <= spa_max_replication(spa));
        ASSERT(BP_GET_NDVAS(bp) == 0);
        ASSERT(hintbp == NULL || ndvas <= BP_GET_NDVAS(hintbp));
        ASSERT3P(zal, !=, NULL);

        for (int d = 0; d < ndvas; d++) {
                error = metaslab_alloc_dva(spa, mc, psize, dva, d, hintdva,
                    txg, flags, zal, allocator);
                if (error != 0) {
                        for (d--; d >= 0; d--) {
                                metaslab_unalloc_dva(spa, &dva[d], txg);
                                metaslab_group_alloc_decrement(spa,
                                    DVA_GET_VDEV(&dva[d]), zio, flags,
                                    allocator, B_FALSE);
                                memset(&dva[d], 0, sizeof (dva_t));
                        }
                        spa_config_exit(spa, SCL_ALLOC, FTAG);
                        return (error);
                } else {
                        /*
                         * Update the metaslab group's queue depth
                         * based on the newly allocated dva.
                         */
                        metaslab_group_alloc_increment(spa,
                            DVA_GET_VDEV(&dva[d]), zio, flags, allocator);
                }
        }
        ASSERT(error == 0);
        ASSERT(BP_GET_NDVAS(bp) == ndvas);

        spa_config_exit(spa, SCL_ALLOC, FTAG);

        BP_SET_BIRTH(bp, txg, 0);

        return (0);
}

void
metaslab_free(spa_t *spa, const blkptr_t *bp, uint64_t txg, boolean_t now)
{
        const dva_t *dva = bp->blk_dva;
        int ndvas = BP_GET_NDVAS(bp);

        ASSERT(!BP_IS_HOLE(bp));
        ASSERT(!now || bp->blk_birth >= spa_syncing_txg(spa));

        /*
         * If we have a checkpoint for the pool we need to make sure that
         * the blocks that we free that are part of the checkpoint won't be
         * reused until the checkpoint is discarded or we revert to it.
         *
         * The checkpoint flag is passed down the metaslab_free code path
         * and is set whenever we want to add a block to the checkpoint's
         * accounting. That is, we "checkpoint" blocks that existed at the
         * time the checkpoint was created and are therefore referenced by
         * the checkpointed uberblock.
         *
         * Note that, we don't checkpoint any blocks if the current
         * syncing txg <= spa_checkpoint_txg. We want these frees to sync
         * normally as they will be referenced by the checkpointed uberblock.
         */
        boolean_t checkpoint = B_FALSE;
        if (bp->blk_birth <= spa->spa_checkpoint_txg &&
            spa_syncing_txg(spa) > spa->spa_checkpoint_txg) {
                /*
                 * At this point, if the block is part of the checkpoint
                 * there is no way it was created in the current txg.
                 */
                ASSERT(!now);
                ASSERT3U(spa_syncing_txg(spa), ==, txg);
                checkpoint = B_TRUE;
        }

        spa_config_enter(spa, SCL_FREE, FTAG, RW_READER);

        for (int d = 0; d < ndvas; d++) {
                if (now) {
                        metaslab_unalloc_dva(spa, &dva[d], txg);
                } else {
                        ASSERT3U(txg, ==, spa_syncing_txg(spa));
                        metaslab_free_dva(spa, &dva[d], checkpoint);
                }
        }

        spa_config_exit(spa, SCL_FREE, FTAG);
}

int
metaslab_claim(spa_t *spa, const blkptr_t *bp, uint64_t txg)
{
        const dva_t *dva = bp->blk_dva;
        int ndvas = BP_GET_NDVAS(bp);
        int error = 0;

        ASSERT(!BP_IS_HOLE(bp));

        if (txg != 0) {
                /*
                 * First do a dry run to make sure all DVAs are claimable,
                 * so we don't have to unwind from partial failures below.
                 */
                if ((error = metaslab_claim(spa, bp, 0)) != 0)
                        return (error);
        }

        spa_config_enter(spa, SCL_ALLOC, FTAG, RW_READER);

        for (int d = 0; d < ndvas; d++) {
                error = metaslab_claim_dva(spa, &dva[d], txg);
                if (error != 0)
                        break;
        }

        spa_config_exit(spa, SCL_ALLOC, FTAG);

        ASSERT(error == 0 || txg == 0);

        return (error);
}

void
metaslab_fastwrite_mark(spa_t *spa, const blkptr_t *bp)
{
        const dva_t *dva = bp->blk_dva;
        int ndvas = BP_GET_NDVAS(bp);
        uint64_t psize = BP_GET_PSIZE(bp);
        int d;
        vdev_t *vd;

        ASSERT(!BP_IS_HOLE(bp));
        ASSERT(!BP_IS_EMBEDDED(bp));
        ASSERT(psize > 0);

        spa_config_enter(spa, SCL_VDEV, FTAG, RW_READER);

        for (d = 0; d < ndvas; d++) {
                if ((vd = vdev_lookup_top(spa, DVA_GET_VDEV(&dva[d]))) == NULL)
                        continue;
                atomic_add_64(&vd->vdev_pending_fastwrite, psize);
        }

        spa_config_exit(spa, SCL_VDEV, FTAG);
}

void
metaslab_fastwrite_unmark(spa_t *spa, const blkptr_t *bp)
{
        const dva_t *dva = bp->blk_dva;
        int ndvas = BP_GET_NDVAS(bp);
        uint64_t psize = BP_GET_PSIZE(bp);
        int d;
        vdev_t *vd;

        ASSERT(!BP_IS_HOLE(bp));
        ASSERT(!BP_IS_EMBEDDED(bp));
        ASSERT(psize > 0);

        spa_config_enter(spa, SCL_VDEV, FTAG, RW_READER);

        for (d = 0; d < ndvas; d++) {
                if ((vd = vdev_lookup_top(spa, DVA_GET_VDEV(&dva[d]))) == NULL)
                        continue;
                ASSERT3U(vd->vdev_pending_fastwrite, >=, psize);
                atomic_sub_64(&vd->vdev_pending_fastwrite, psize);
        }

        spa_config_exit(spa, SCL_VDEV, FTAG);
}

static void
metaslab_check_free_impl_cb(uint64_t inner, vdev_t *vd, uint64_t offset,
    uint64_t size, void *arg)
{
        (void) inner, (void) arg;

        if (vd->vdev_ops == &vdev_indirect_ops)
                return;

        metaslab_check_free_impl(vd, offset, size);
}

static void
metaslab_check_free_impl(vdev_t *vd, uint64_t offset, uint64_t size)
{
        metaslab_t *msp;
        spa_t *spa __maybe_unused = vd->vdev_spa;

        if ((zfs_flags & ZFS_DEBUG_ZIO_FREE) == 0)
                return;

        if (vd->vdev_ops->vdev_op_remap != NULL) {
                vd->vdev_ops->vdev_op_remap(vd, offset, size,
                    metaslab_check_free_impl_cb, NULL);
                return;
        }

        ASSERT(vdev_is_concrete(vd));
        ASSERT3U(offset >> vd->vdev_ms_shift, <, vd->vdev_ms_count);
        ASSERT3U(spa_config_held(spa, SCL_ALL, RW_READER), !=, 0);

        msp = vd->vdev_ms[offset >> vd->vdev_ms_shift];

        mutex_enter(&msp->ms_lock);
        if (msp->ms_loaded) {
                range_tree_verify_not_present(msp->ms_allocatable,
                    offset, size);
        }

        /*
         * Check all segments that currently exist in the freeing pipeline.
         *
         * It would intuitively make sense to also check the current allocating
         * tree since metaslab_unalloc_dva() exists for extents that are
         * allocated and freed in the same sync pass within the same txg.
         * Unfortunately there are places (e.g. the ZIL) where we allocate a
         * segment but then we free part of it within the same txg
         * [see zil_sync()]. Thus, we don't call range_tree_verify() in the
         * current allocating tree.
         */
        range_tree_verify_not_present(msp->ms_freeing, offset, size);
        range_tree_verify_not_present(msp->ms_checkpointing, offset, size);
        range_tree_verify_not_present(msp->ms_freed, offset, size);
        for (int j = 0; j < TXG_DEFER_SIZE; j++)
                range_tree_verify_not_present(msp->ms_defer[j], offset, size);
        range_tree_verify_not_present(msp->ms_trim, offset, size);
        mutex_exit(&msp->ms_lock);
}

void
metaslab_check_free(spa_t *spa, const blkptr_t *bp)
{
        if ((zfs_flags & ZFS_DEBUG_ZIO_FREE) == 0)
                return;

        spa_config_enter(spa, SCL_VDEV, FTAG, RW_READER);
        for (int i = 0; i < BP_GET_NDVAS(bp); i++) {
                uint64_t vdev = DVA_GET_VDEV(&bp->blk_dva[i]);
                vdev_t *vd = vdev_lookup_top(spa, vdev);
                uint64_t offset = DVA_GET_OFFSET(&bp->blk_dva[i]);
                uint64_t size = DVA_GET_ASIZE(&bp->blk_dva[i]);

                if (DVA_GET_GANG(&bp->blk_dva[i]))
                        size = vdev_gang_header_asize(vd);

                ASSERT3P(vd, !=, NULL);

                metaslab_check_free_impl(vd, offset, size);
        }
        spa_config_exit(spa, SCL_VDEV, FTAG);
}

static void
metaslab_group_disable_wait(metaslab_group_t *mg)
{
        ASSERT(MUTEX_HELD(&mg->mg_ms_disabled_lock));
        while (mg->mg_disabled_updating) {
                cv_wait(&mg->mg_ms_disabled_cv, &mg->mg_ms_disabled_lock);
        }
}

static void
metaslab_group_disabled_increment(metaslab_group_t *mg)
{
        ASSERT(MUTEX_HELD(&mg->mg_ms_disabled_lock));
        ASSERT(mg->mg_disabled_updating);

        while (mg->mg_ms_disabled >= max_disabled_ms) {
                cv_wait(&mg->mg_ms_disabled_cv, &mg->mg_ms_disabled_lock);
        }
        mg->mg_ms_disabled++;
        ASSERT3U(mg->mg_ms_disabled, <=, max_disabled_ms);
}

/*
 * Mark the metaslab as disabled to prevent any allocations on this metaslab.
 * We must also track how many metaslabs are currently disabled within a
 * metaslab group and limit them to prevent allocation failures from
 * occurring because all metaslabs are disabled.
 */
void
metaslab_disable(metaslab_t *msp)
{
        ASSERT(!MUTEX_HELD(&msp->ms_lock));
        metaslab_group_t *mg = msp->ms_group;

        mutex_enter(&mg->mg_ms_disabled_lock);

        /*
         * To keep an accurate count of how many threads have disabled
         * a specific metaslab group, we only allow one thread to mark
         * the metaslab group at a time. This ensures that the value of
         * ms_disabled will be accurate when we decide to mark a metaslab
         * group as disabled. To do this we force all other threads
         * to wait till the metaslab's mg_disabled_updating flag is no
         * longer set.
         */
        metaslab_group_disable_wait(mg);
        mg->mg_disabled_updating = B_TRUE;
        if (msp->ms_disabled == 0) {
                metaslab_group_disabled_increment(mg);
        }
        mutex_enter(&msp->ms_lock);
        msp->ms_disabled++;
        mutex_exit(&msp->ms_lock);

        mg->mg_disabled_updating = B_FALSE;
        cv_broadcast(&mg->mg_ms_disabled_cv);
        mutex_exit(&mg->mg_ms_disabled_lock);
}

void
metaslab_enable(metaslab_t *msp, boolean_t sync, boolean_t unload)
{
        metaslab_group_t *mg = msp->ms_group;
        spa_t *spa = mg->mg_vd->vdev_spa;

        /*
         * Wait for the outstanding IO to be synced to prevent newly
         * allocated blocks from being overwritten.  This used by
         * initialize and TRIM which are modifying unallocated space.
         */
        if (sync)
                txg_wait_synced(spa_get_dsl(spa), 0);

        mutex_enter(&mg->mg_ms_disabled_lock);
        mutex_enter(&msp->ms_lock);
        if (--msp->ms_disabled == 0) {
                mg->mg_ms_disabled--;
                cv_broadcast(&mg->mg_ms_disabled_cv);
                if (unload)
                        metaslab_unload(msp);
        }
        mutex_exit(&msp->ms_lock);
        mutex_exit(&mg->mg_ms_disabled_lock);
}

void
metaslab_set_unflushed_dirty(metaslab_t *ms, boolean_t dirty)
{
        ms->ms_unflushed_dirty = dirty;
}

static void
metaslab_update_ondisk_flush_data(metaslab_t *ms, dmu_tx_t *tx)
{
        vdev_t *vd = ms->ms_group->mg_vd;
        spa_t *spa = vd->vdev_spa;
        objset_t *mos = spa_meta_objset(spa);

        ASSERT(spa_feature_is_active(spa, SPA_FEATURE_LOG_SPACEMAP));

        metaslab_unflushed_phys_t entry = {
                .msp_unflushed_txg = metaslab_unflushed_txg(ms),
        };
        uint64_t entry_size = sizeof (entry);
        uint64_t entry_offset = ms->ms_id * entry_size;

        uint64_t object = 0;
        int err = zap_lookup(mos, vd->vdev_top_zap,
            VDEV_TOP_ZAP_MS_UNFLUSHED_PHYS_TXGS, sizeof (uint64_t), 1,
            &object);
        if (err == ENOENT) {
                object = dmu_object_alloc(mos, DMU_OTN_UINT64_METADATA,
                    SPA_OLD_MAXBLOCKSIZE, DMU_OT_NONE, 0, tx);
                VERIFY0(zap_add(mos, vd->vdev_top_zap,
                    VDEV_TOP_ZAP_MS_UNFLUSHED_PHYS_TXGS, sizeof (uint64_t), 1,
                    &object, tx));
        } else {
                VERIFY0(err);
        }

        dmu_write(spa_meta_objset(spa), object, entry_offset, entry_size,
            &entry, tx);
}

void
metaslab_set_unflushed_txg(metaslab_t *ms, uint64_t txg, dmu_tx_t *tx)
{
        ms->ms_unflushed_txg = txg;
        metaslab_update_ondisk_flush_data(ms, tx);
}

boolean_t
metaslab_unflushed_dirty(metaslab_t *ms)
{
        return (ms->ms_unflushed_dirty);
}

uint64_t
metaslab_unflushed_txg(metaslab_t *ms)
{
        return (ms->ms_unflushed_txg);
}

ZFS_MODULE_PARAM(zfs_metaslab, metaslab_, aliquot, U64, ZMOD_RW,
        "Allocation granularity (a.k.a. stripe size)");

ZFS_MODULE_PARAM(zfs_metaslab, metaslab_, debug_load, INT, ZMOD_RW,
        "Load all metaslabs when pool is first opened");

ZFS_MODULE_PARAM(zfs_metaslab, metaslab_, debug_unload, INT, ZMOD_RW,
        "Prevent metaslabs from being unloaded");

ZFS_MODULE_PARAM(zfs_metaslab, metaslab_, preload_enabled, INT, ZMOD_RW,
        "Preload potential metaslabs during reassessment");

ZFS_MODULE_PARAM(zfs_metaslab, metaslab_, unload_delay, UINT, ZMOD_RW,
        "Delay in txgs after metaslab was last used before unloading");

ZFS_MODULE_PARAM(zfs_metaslab, metaslab_, unload_delay_ms, UINT, ZMOD_RW,
        "Delay in milliseconds after metaslab was last used before unloading");

/* BEGIN CSTYLED */
ZFS_MODULE_PARAM(zfs_mg, zfs_mg_, noalloc_threshold, UINT, ZMOD_RW,
        "Percentage of metaslab group size that should be free to make it "
        "eligible for allocation");

ZFS_MODULE_PARAM(zfs_mg, zfs_mg_, fragmentation_threshold, UINT, ZMOD_RW,
        "Percentage of metaslab group size that should be considered eligible "
        "for allocations unless all metaslab groups within the metaslab class "
        "have also crossed this threshold");

ZFS_MODULE_PARAM(zfs_metaslab, metaslab_, fragmentation_factor_enabled, INT,
        ZMOD_RW,
        "Use the fragmentation metric to prefer less fragmented metaslabs");
/* END CSTYLED */

ZFS_MODULE_PARAM(zfs_metaslab, zfs_metaslab_, fragmentation_threshold, UINT,
        ZMOD_RW, "Fragmentation for metaslab to allow allocation");

ZFS_MODULE_PARAM(zfs_metaslab, metaslab_, lba_weighting_enabled, INT, ZMOD_RW,
        "Prefer metaslabs with lower LBAs");

ZFS_MODULE_PARAM(zfs_metaslab, metaslab_, bias_enabled, INT, ZMOD_RW,
        "Enable metaslab group biasing");

ZFS_MODULE_PARAM(zfs_metaslab, zfs_metaslab_, segment_weight_enabled, INT,
        ZMOD_RW, "Enable segment-based metaslab selection");

ZFS_MODULE_PARAM(zfs_metaslab, zfs_metaslab_, switch_threshold, INT, ZMOD_RW,
        "Segment-based metaslab selection maximum buckets before switching");

ZFS_MODULE_PARAM(zfs_metaslab, metaslab_, force_ganging, U64, ZMOD_RW,
        "Blocks larger than this size are forced to be gang blocks");

ZFS_MODULE_PARAM(zfs_metaslab, metaslab_, df_max_search, UINT, ZMOD_RW,
        "Max distance (bytes) to search forward before using size tree");

ZFS_MODULE_PARAM(zfs_metaslab, metaslab_, df_use_largest_segment, INT, ZMOD_RW,
        "When looking in size tree, use largest segment instead of exact fit");

ZFS_MODULE_PARAM(zfs_metaslab, zfs_metaslab_, max_size_cache_sec, U64,
        ZMOD_RW, "How long to trust the cached max chunk size of a metaslab");

ZFS_MODULE_PARAM(zfs_metaslab, zfs_metaslab_, mem_limit, UINT, ZMOD_RW,
        "Percentage of memory that can be used to store metaslab range trees");

ZFS_MODULE_PARAM(zfs_metaslab, zfs_metaslab_, try_hard_before_gang, INT,
        ZMOD_RW, "Try hard to allocate before ganging");

ZFS_MODULE_PARAM(zfs_metaslab, zfs_metaslab_, find_max_tries, UINT, ZMOD_RW,
        "Normally only consider this many of the best metaslabs in each vdev");