2 * Copyright (c) 2003-2007 Nate Lawson
3 * Copyright (c) 2000 Michael Smith
4 * Copyright (c) 2000 BSDi
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
29 #include <sys/cdefs.h>
30 __FBSDID("$FreeBSD$");
33 #include <sys/param.h>
34 #include <sys/kernel.h>
37 #include <sys/malloc.h>
38 #include <sys/module.h>
41 #include <machine/bus.h>
42 #include <machine/resource.h>
45 #include <contrib/dev/acpica/include/acpi.h>
46 #include <contrib/dev/acpica/include/accommon.h>
48 #include <dev/acpica/acpivar.h>
50 /* Hooks for the ACPI CA debugging infrastructure */
51 #define _COMPONENT ACPI_EC
52 ACPI_MODULE_NAME("EC")
58 typedef UINT8 EC_COMMAND;
60 #define EC_COMMAND_UNKNOWN ((EC_COMMAND) 0x00)
61 #define EC_COMMAND_READ ((EC_COMMAND) 0x80)
62 #define EC_COMMAND_WRITE ((EC_COMMAND) 0x81)
63 #define EC_COMMAND_BURST_ENABLE ((EC_COMMAND) 0x82)
64 #define EC_COMMAND_BURST_DISABLE ((EC_COMMAND) 0x83)
65 #define EC_COMMAND_QUERY ((EC_COMMAND) 0x84)
70 * The encoding of the EC status register is illustrated below.
71 * Note that a set bit (1) indicates the property is TRUE
72 * (e.g. if bit 0 is set then the output buffer is full).
77 * | | | | | | | +- Output Buffer Full?
78 * | | | | | | +--- Input Buffer Full?
79 * | | | | | +----- <reserved>
80 * | | | | +------- Data Register is Command Byte?
81 * | | | +--------- Burst Mode Enabled?
82 * | | +----------- SCI Event?
83 * | +------------- SMI Event?
84 * +--------------- <reserved>
87 typedef UINT8 EC_STATUS;
89 #define EC_FLAG_OUTPUT_BUFFER ((EC_STATUS) 0x01)
90 #define EC_FLAG_INPUT_BUFFER ((EC_STATUS) 0x02)
91 #define EC_FLAG_DATA_IS_CMD ((EC_STATUS) 0x08)
92 #define EC_FLAG_BURST_MODE ((EC_STATUS) 0x10)
98 typedef UINT8 EC_EVENT;
100 #define EC_EVENT_UNKNOWN ((EC_EVENT) 0x00)
101 #define EC_EVENT_OUTPUT_BUFFER_FULL ((EC_EVENT) 0x01)
102 #define EC_EVENT_INPUT_BUFFER_EMPTY ((EC_EVENT) 0x02)
103 #define EC_EVENT_SCI ((EC_EVENT) 0x20)
104 #define EC_EVENT_SMI ((EC_EVENT) 0x40)
106 /* Data byte returned after burst enable indicating it was successful. */
107 #define EC_BURST_ACK 0x90
110 * Register access primitives
112 #define EC_GET_DATA(sc) \
113 bus_space_read_1((sc)->ec_data_tag, (sc)->ec_data_handle, 0)
115 #define EC_SET_DATA(sc, v) \
116 bus_space_write_1((sc)->ec_data_tag, (sc)->ec_data_handle, 0, (v))
118 #define EC_GET_CSR(sc) \
119 bus_space_read_1((sc)->ec_csr_tag, (sc)->ec_csr_handle, 0)
121 #define EC_SET_CSR(sc, v) \
122 bus_space_write_1((sc)->ec_csr_tag, (sc)->ec_csr_handle, 0, (v))
124 /* Additional params to pass from the probe routine */
125 struct acpi_ec_params {
128 ACPI_HANDLE gpe_handle;
135 struct acpi_ec_softc {
137 ACPI_HANDLE ec_handle;
139 ACPI_HANDLE ec_gpehandle;
143 struct resource *ec_data_res;
144 bus_space_tag_t ec_data_tag;
145 bus_space_handle_t ec_data_handle;
148 struct resource *ec_csr_res;
149 bus_space_tag_t ec_csr_tag;
150 bus_space_handle_t ec_csr_handle;
156 volatile u_int ec_gencount;
162 * I couldn't find it in the spec but other implementations also use a
163 * value of 1 ms for the time to acquire global lock.
165 #define EC_LOCK_TIMEOUT 1000
167 /* Default delay in microseconds between each run of the status polling loop. */
168 #define EC_POLL_DELAY 50
170 /* Total time in ms spent waiting for a response from EC. */
171 #define EC_TIMEOUT 750
173 #define EVENT_READY(event, status) \
174 (((event) == EC_EVENT_OUTPUT_BUFFER_FULL && \
175 ((status) & EC_FLAG_OUTPUT_BUFFER) != 0) || \
176 ((event) == EC_EVENT_INPUT_BUFFER_EMPTY && \
177 ((status) & EC_FLAG_INPUT_BUFFER) == 0))
179 ACPI_SERIAL_DECL(ec, "ACPI embedded controller");
181 static SYSCTL_NODE(_debug_acpi, OID_AUTO, ec, CTLFLAG_RD, NULL, "EC debugging");
183 static int ec_burst_mode;
184 SYSCTL_INT(_debug_acpi_ec, OID_AUTO, burst, CTLFLAG_RWTUN, &ec_burst_mode, 0,
185 "Enable use of burst mode (faster for nearly all systems)");
186 static int ec_polled_mode;
187 SYSCTL_INT(_debug_acpi_ec, OID_AUTO, polled, CTLFLAG_RWTUN, &ec_polled_mode, 0,
188 "Force use of polled mode (only if interrupt mode doesn't work)");
189 static int ec_timeout = EC_TIMEOUT;
190 SYSCTL_INT(_debug_acpi_ec, OID_AUTO, timeout, CTLFLAG_RWTUN, &ec_timeout,
191 EC_TIMEOUT, "Total time spent waiting for a response (poll+sleep)");
194 EcLock(struct acpi_ec_softc *sc)
198 /* If _GLK is non-zero, acquire the global lock. */
201 status = AcpiAcquireGlobalLock(EC_LOCK_TIMEOUT, &sc->ec_glkhandle);
202 if (ACPI_FAILURE(status))
205 ACPI_SERIAL_BEGIN(ec);
210 EcUnlock(struct acpi_ec_softc *sc)
214 AcpiReleaseGlobalLock(sc->ec_glkhandle);
217 static UINT32 EcGpeHandler(ACPI_HANDLE, UINT32, void *);
218 static ACPI_STATUS EcSpaceSetup(ACPI_HANDLE Region, UINT32 Function,
219 void *Context, void **return_Context);
220 static ACPI_STATUS EcSpaceHandler(UINT32 Function,
221 ACPI_PHYSICAL_ADDRESS Address,
222 UINT32 Width, UINT64 *Value,
223 void *Context, void *RegionContext);
224 static ACPI_STATUS EcWaitEvent(struct acpi_ec_softc *sc, EC_EVENT Event,
226 static ACPI_STATUS EcCommand(struct acpi_ec_softc *sc, EC_COMMAND cmd);
227 static ACPI_STATUS EcRead(struct acpi_ec_softc *sc, UINT8 Address,
229 static ACPI_STATUS EcWrite(struct acpi_ec_softc *sc, UINT8 Address,
231 static int acpi_ec_probe(device_t dev);
232 static int acpi_ec_attach(device_t dev);
233 static int acpi_ec_suspend(device_t dev);
234 static int acpi_ec_resume(device_t dev);
235 static int acpi_ec_shutdown(device_t dev);
236 static int acpi_ec_read_method(device_t dev, u_int addr,
237 UINT64 *val, int width);
238 static int acpi_ec_write_method(device_t dev, u_int addr,
239 UINT64 val, int width);
241 static device_method_t acpi_ec_methods[] = {
242 /* Device interface */
243 DEVMETHOD(device_probe, acpi_ec_probe),
244 DEVMETHOD(device_attach, acpi_ec_attach),
245 DEVMETHOD(device_suspend, acpi_ec_suspend),
246 DEVMETHOD(device_resume, acpi_ec_resume),
247 DEVMETHOD(device_shutdown, acpi_ec_shutdown),
249 /* Embedded controller interface */
250 DEVMETHOD(acpi_ec_read, acpi_ec_read_method),
251 DEVMETHOD(acpi_ec_write, acpi_ec_write_method),
256 static driver_t acpi_ec_driver = {
259 sizeof(struct acpi_ec_softc),
262 static devclass_t acpi_ec_devclass;
263 DRIVER_MODULE(acpi_ec, acpi, acpi_ec_driver, acpi_ec_devclass, 0, 0);
264 MODULE_DEPEND(acpi_ec, acpi, 1, 1, 1);
267 * Look for an ECDT and if we find one, set up default GPE and
268 * space handlers to catch attempts to access EC space before
269 * we have a real driver instance in place.
271 * TODO: Some old Gateway laptops need us to fake up an ECDT or
272 * otherwise attach early so that _REG methods can run.
275 acpi_ec_ecdt_probe(device_t parent)
277 ACPI_TABLE_ECDT *ecdt;
281 struct acpi_ec_params *params;
283 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
285 /* Find and validate the ECDT. */
286 status = AcpiGetTable(ACPI_SIG_ECDT, 1, (ACPI_TABLE_HEADER **)&ecdt);
287 if (ACPI_FAILURE(status) ||
288 ecdt->Control.BitWidth != 8 ||
289 ecdt->Data.BitWidth != 8) {
293 /* Create the child device with the given unit number. */
294 child = BUS_ADD_CHILD(parent, 3, "acpi_ec", ecdt->Uid);
296 printf("%s: can't add child\n", __func__);
300 /* Find and save the ACPI handle for this device. */
301 status = AcpiGetHandle(NULL, ecdt->Id, &h);
302 if (ACPI_FAILURE(status)) {
303 device_delete_child(parent, child);
304 printf("%s: can't get handle\n", __func__);
307 acpi_set_handle(child, h);
309 /* Set the data and CSR register addresses. */
310 bus_set_resource(child, SYS_RES_IOPORT, 0, ecdt->Data.Address,
312 bus_set_resource(child, SYS_RES_IOPORT, 1, ecdt->Control.Address,
316 * Store values for the probe/attach routines to use. Store the
317 * ECDT GPE bit and set the global lock flag according to _GLK.
318 * Note that it is not perfectly correct to be evaluating a method
319 * before initializing devices, but in practice this function
320 * should be safe to call at this point.
322 params = malloc(sizeof(struct acpi_ec_params), M_TEMP, M_WAITOK | M_ZERO);
323 params->gpe_handle = NULL;
324 params->gpe_bit = ecdt->Gpe;
325 params->uid = ecdt->Uid;
326 acpi_GetInteger(h, "_GLK", ¶ms->glk);
327 acpi_set_private(child, params);
329 /* Finish the attach process. */
330 if (device_probe_and_attach(child) != 0)
331 device_delete_child(parent, child);
335 acpi_ec_probe(device_t dev)
345 struct acpi_ec_params *params;
346 static char *ec_ids[] = { "PNP0C09", NULL };
348 /* Check that this is a device and that EC is not disabled. */
349 if (acpi_get_type(dev) != ACPI_TYPE_DEVICE || acpi_disabled("ec"))
353 * If probed via ECDT, set description and continue. Otherwise,
354 * we can access the namespace and make sure this is not a
360 buf.Length = ACPI_ALLOCATE_BUFFER;
361 params = acpi_get_private(dev);
362 if (params != NULL) {
365 } else if (ACPI_ID_PROBE(device_get_parent(dev), dev, ec_ids)) {
366 params = malloc(sizeof(struct acpi_ec_params), M_TEMP,
368 h = acpi_get_handle(dev);
371 * Read the unit ID to check for duplicate attach and the
372 * global lock value to see if we should acquire it when
375 status = acpi_GetInteger(h, "_UID", ¶ms->uid);
376 if (ACPI_FAILURE(status))
378 status = acpi_GetInteger(h, "_GLK", ¶ms->glk);
379 if (ACPI_FAILURE(status))
383 * Evaluate the _GPE method to find the GPE bit used by the EC to
384 * signal status (SCI). If it's a package, it contains a reference
385 * and GPE bit, similar to _PRW.
387 status = AcpiEvaluateObject(h, "_GPE", NULL, &buf);
388 if (ACPI_FAILURE(status)) {
389 device_printf(dev, "can't evaluate _GPE - %s\n",
390 AcpiFormatException(status));
393 obj = (ACPI_OBJECT *)buf.Pointer;
398 case ACPI_TYPE_INTEGER:
399 params->gpe_handle = NULL;
400 params->gpe_bit = obj->Integer.Value;
402 case ACPI_TYPE_PACKAGE:
403 if (!ACPI_PKG_VALID(obj, 2))
406 acpi_GetReference(NULL, &obj->Package.Elements[0]);
407 if (params->gpe_handle == NULL ||
408 acpi_PkgInt32(obj, 1, ¶ms->gpe_bit) != 0)
412 device_printf(dev, "_GPE has invalid type %d\n", obj->Type);
416 /* Store the values we got from the namespace for attach. */
417 acpi_set_private(dev, params);
420 * Check for a duplicate probe. This can happen when a probe
421 * via ECDT succeeded already. If this is a duplicate, disable
424 peer = devclass_get_device(acpi_ec_devclass, params->uid);
425 if (peer == NULL || !device_is_alive(peer))
433 snprintf(desc, sizeof(desc), "Embedded Controller: GPE %#x%s%s",
434 params->gpe_bit, (params->glk) ? ", GLK" : "",
435 ecdt ? ", ECDT" : "");
436 device_set_desc_copy(dev, desc);
439 if (ret > 0 && params)
440 free(params, M_TEMP);
442 AcpiOsFree(buf.Pointer);
447 acpi_ec_attach(device_t dev)
449 struct acpi_ec_softc *sc;
450 struct acpi_ec_params *params;
453 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
455 /* Fetch/initialize softc (assumes softc is pre-zeroed). */
456 sc = device_get_softc(dev);
457 params = acpi_get_private(dev);
459 sc->ec_handle = acpi_get_handle(dev);
461 /* Retrieve previously probed values via device ivars. */
462 sc->ec_glk = params->glk;
463 sc->ec_gpebit = params->gpe_bit;
464 sc->ec_gpehandle = params->gpe_handle;
465 sc->ec_uid = params->uid;
466 sc->ec_suspending = FALSE;
467 acpi_set_private(dev, NULL);
468 free(params, M_TEMP);
470 /* Attach bus resources for data and command/status ports. */
472 sc->ec_data_res = bus_alloc_resource_any(sc->ec_dev, SYS_RES_IOPORT,
473 &sc->ec_data_rid, RF_ACTIVE);
474 if (sc->ec_data_res == NULL) {
475 device_printf(dev, "can't allocate data port\n");
478 sc->ec_data_tag = rman_get_bustag(sc->ec_data_res);
479 sc->ec_data_handle = rman_get_bushandle(sc->ec_data_res);
482 sc->ec_csr_res = bus_alloc_resource_any(sc->ec_dev, SYS_RES_IOPORT,
483 &sc->ec_csr_rid, RF_ACTIVE);
484 if (sc->ec_csr_res == NULL) {
485 device_printf(dev, "can't allocate command/status port\n");
488 sc->ec_csr_tag = rman_get_bustag(sc->ec_csr_res);
489 sc->ec_csr_handle = rman_get_bushandle(sc->ec_csr_res);
492 * Install a handler for this EC's GPE bit. We want edge-triggered
495 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "attaching GPE handler\n"));
496 Status = AcpiInstallGpeHandler(sc->ec_gpehandle, sc->ec_gpebit,
497 ACPI_GPE_EDGE_TRIGGERED, EcGpeHandler, sc);
498 if (ACPI_FAILURE(Status)) {
499 device_printf(dev, "can't install GPE handler for %s - %s\n",
500 acpi_name(sc->ec_handle), AcpiFormatException(Status));
505 * Install address space handler
507 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "attaching address space handler\n"));
508 Status = AcpiInstallAddressSpaceHandler(sc->ec_handle, ACPI_ADR_SPACE_EC,
509 &EcSpaceHandler, &EcSpaceSetup, sc);
510 if (ACPI_FAILURE(Status)) {
511 device_printf(dev, "can't install address space handler for %s - %s\n",
512 acpi_name(sc->ec_handle), AcpiFormatException(Status));
516 /* Enable runtime GPEs for the handler. */
517 Status = AcpiEnableGpe(sc->ec_gpehandle, sc->ec_gpebit);
518 if (ACPI_FAILURE(Status)) {
519 device_printf(dev, "AcpiEnableGpe failed: %s\n",
520 AcpiFormatException(Status));
524 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "acpi_ec_attach complete\n"));
528 AcpiRemoveGpeHandler(sc->ec_gpehandle, sc->ec_gpebit, EcGpeHandler);
529 AcpiRemoveAddressSpaceHandler(sc->ec_handle, ACPI_ADR_SPACE_EC,
532 bus_release_resource(sc->ec_dev, SYS_RES_IOPORT, sc->ec_csr_rid,
535 bus_release_resource(sc->ec_dev, SYS_RES_IOPORT, sc->ec_data_rid,
541 acpi_ec_suspend(device_t dev)
543 struct acpi_ec_softc *sc;
545 sc = device_get_softc(dev);
546 sc->ec_suspending = TRUE;
551 acpi_ec_resume(device_t dev)
553 struct acpi_ec_softc *sc;
555 sc = device_get_softc(dev);
556 sc->ec_suspending = FALSE;
561 acpi_ec_shutdown(device_t dev)
563 struct acpi_ec_softc *sc;
565 /* Disable the GPE so we don't get EC events during shutdown. */
566 sc = device_get_softc(dev);
567 AcpiDisableGpe(sc->ec_gpehandle, sc->ec_gpebit);
571 /* Methods to allow other devices (e.g., smbat) to read/write EC space. */
573 acpi_ec_read_method(device_t dev, u_int addr, UINT64 *val, int width)
575 struct acpi_ec_softc *sc;
578 sc = device_get_softc(dev);
579 status = EcSpaceHandler(ACPI_READ, addr, width * 8, val, sc, NULL);
580 if (ACPI_FAILURE(status))
586 acpi_ec_write_method(device_t dev, u_int addr, UINT64 val, int width)
588 struct acpi_ec_softc *sc;
591 sc = device_get_softc(dev);
592 status = EcSpaceHandler(ACPI_WRITE, addr, width * 8, &val, sc, NULL);
593 if (ACPI_FAILURE(status))
599 EcCheckStatus(struct acpi_ec_softc *sc, const char *msg, EC_EVENT event)
604 status = AE_NO_HARDWARE_RESPONSE;
605 ec_status = EC_GET_CSR(sc);
606 if (sc->ec_burstactive && !(ec_status & EC_FLAG_BURST_MODE)) {
607 CTR1(KTR_ACPI, "ec burst disabled in waitevent (%s)", msg);
608 sc->ec_burstactive = FALSE;
610 if (EVENT_READY(event, ec_status)) {
611 CTR2(KTR_ACPI, "ec %s wait ready, status %#x", msg, ec_status);
618 EcGpeQueryHandler(void *Context)
620 struct acpi_ec_softc *sc = (struct acpi_ec_softc *)Context;
623 int retry, sci_enqueued;
626 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
627 KASSERT(Context != NULL, ("EcGpeQueryHandler called with NULL"));
629 /* Serialize user access with EcSpaceHandler(). */
631 if (ACPI_FAILURE(Status)) {
632 device_printf(sc->ec_dev, "GpeQuery lock error: %s\n",
633 AcpiFormatException(Status));
638 * Send a query command to the EC to find out which _Qxx call it
639 * wants to make. This command clears the SCI bit and also the
640 * interrupt source since we are edge-triggered. To prevent the GPE
641 * that may arise from running the query from causing another query
642 * to be queued, we clear the pending flag only after running it.
644 sci_enqueued = sc->ec_sci_pend;
645 for (retry = 0; retry < 2; retry++) {
646 Status = EcCommand(sc, EC_COMMAND_QUERY);
647 if (ACPI_SUCCESS(Status))
649 if (ACPI_SUCCESS(EcCheckStatus(sc, "retr_check",
650 EC_EVENT_INPUT_BUFFER_EMPTY)))
655 sc->ec_sci_pend = FALSE;
656 if (ACPI_FAILURE(Status)) {
658 device_printf(sc->ec_dev, "GPE query failed: %s\n",
659 AcpiFormatException(Status));
662 Data = EC_GET_DATA(sc);
665 * We have to unlock before running the _Qxx method below since that
666 * method may attempt to read/write from EC address space, causing
667 * recursive acquisition of the lock.
671 /* Ignore the value for "no outstanding event". (13.3.5) */
672 CTR2(KTR_ACPI, "ec query ok,%s running _Q%02X", Data ? "" : " not", Data);
676 /* Evaluate _Qxx to respond to the controller. */
677 snprintf(qxx, sizeof(qxx), "_Q%02X", Data);
679 Status = AcpiEvaluateObject(sc->ec_handle, qxx, NULL, NULL);
680 if (ACPI_FAILURE(Status) && Status != AE_NOT_FOUND) {
681 device_printf(sc->ec_dev, "evaluation of query method %s failed: %s\n",
682 qxx, AcpiFormatException(Status));
685 /* Reenable runtime GPE if its execution was deferred. */
687 Status = AcpiFinishGpe(sc->ec_gpehandle, sc->ec_gpebit);
688 if (ACPI_FAILURE(Status))
689 device_printf(sc->ec_dev, "reenabling runtime GPE failed: %s\n",
690 AcpiFormatException(Status));
695 * The GPE handler is called when IBE/OBF or SCI events occur. We are
696 * called from an unknown lock context.
699 EcGpeHandler(ACPI_HANDLE GpeDevice, UINT32 GpeNumber, void *Context)
701 struct acpi_ec_softc *sc = Context;
705 KASSERT(Context != NULL, ("EcGpeHandler called with NULL"));
706 CTR0(KTR_ACPI, "ec gpe handler start");
709 * Notify EcWaitEvent() that the status register is now fresh. If we
710 * didn't do this, it wouldn't be possible to distinguish an old IBE
711 * from a new one, for example when doing a write transaction (writing
712 * address and then data values.)
714 atomic_add_int(&sc->ec_gencount, 1);
718 * If the EC_SCI bit of the status register is set, queue a query handler.
719 * It will run the query and _Qxx method later, under the lock.
721 EcStatus = EC_GET_CSR(sc);
722 if ((EcStatus & EC_EVENT_SCI) && !sc->ec_sci_pend) {
723 CTR0(KTR_ACPI, "ec gpe queueing query handler");
724 Status = AcpiOsExecute(OSL_GPE_HANDLER, EcGpeQueryHandler, Context);
725 if (ACPI_SUCCESS(Status)) {
726 sc->ec_sci_pend = TRUE;
729 printf("EcGpeHandler: queuing GPE query handler failed\n");
731 return (ACPI_REENABLE_GPE);
735 EcSpaceSetup(ACPI_HANDLE Region, UINT32 Function, void *Context,
736 void **RegionContext)
739 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
742 * If deactivating a region, always set the output to NULL. Otherwise,
743 * just pass the context through.
745 if (Function == ACPI_REGION_DEACTIVATE)
746 *RegionContext = NULL;
748 *RegionContext = Context;
750 return_ACPI_STATUS (AE_OK);
754 EcSpaceHandler(UINT32 Function, ACPI_PHYSICAL_ADDRESS Address, UINT32 Width,
755 UINT64 *Value, void *Context, void *RegionContext)
757 struct acpi_ec_softc *sc = (struct acpi_ec_softc *)Context;
758 ACPI_PHYSICAL_ADDRESS EcAddr;
762 ACPI_FUNCTION_TRACE_U32((char *)(uintptr_t)__func__, (UINT32)Address);
764 if (Function != ACPI_READ && Function != ACPI_WRITE)
765 return_ACPI_STATUS (AE_BAD_PARAMETER);
766 if (Width % 8 != 0 || Value == NULL || Context == NULL)
767 return_ACPI_STATUS (AE_BAD_PARAMETER);
768 if (Address + Width / 8 > 256)
769 return_ACPI_STATUS (AE_BAD_ADDRESS);
772 * If booting, check if we need to run the query handler. If so, we
773 * we call it directly here since our thread taskq is not active yet.
775 if (cold || rebooting || sc->ec_suspending) {
776 if ((EC_GET_CSR(sc) & EC_EVENT_SCI)) {
777 CTR0(KTR_ACPI, "ec running gpe handler directly");
778 EcGpeQueryHandler(sc);
782 /* Serialize with EcGpeQueryHandler() at transaction granularity. */
784 if (ACPI_FAILURE(Status))
785 return_ACPI_STATUS (Status);
787 /* If we can't start burst mode, continue anyway. */
788 Status = EcCommand(sc, EC_COMMAND_BURST_ENABLE);
789 if (ACPI_SUCCESS(Status)) {
790 if (EC_GET_DATA(sc) == EC_BURST_ACK) {
791 CTR0(KTR_ACPI, "ec burst enabled");
792 sc->ec_burstactive = TRUE;
796 /* Perform the transaction(s), based on Width. */
798 EcData = (UINT8 *)Value;
799 if (Function == ACPI_READ)
804 Status = EcRead(sc, EcAddr, EcData);
807 Status = EcWrite(sc, EcAddr, *EcData);
810 if (ACPI_FAILURE(Status))
814 } while (EcAddr < Address + Width / 8);
816 if (sc->ec_burstactive) {
817 sc->ec_burstactive = FALSE;
818 if (ACPI_SUCCESS(EcCommand(sc, EC_COMMAND_BURST_DISABLE)))
819 CTR0(KTR_ACPI, "ec disabled burst ok");
823 return_ACPI_STATUS (Status);
827 EcWaitEvent(struct acpi_ec_softc *sc, EC_EVENT Event, u_int gen_count)
829 static int no_intr = 0;
831 int count, i, need_poll, slp_ival;
833 ACPI_SERIAL_ASSERT(ec);
834 Status = AE_NO_HARDWARE_RESPONSE;
835 need_poll = cold || rebooting || ec_polled_mode || sc->ec_suspending;
837 /* Wait for event by polling or GPE (interrupt). */
839 count = (ec_timeout * 1000) / EC_POLL_DELAY;
843 for (i = 0; i < count; i++) {
844 Status = EcCheckStatus(sc, "poll", Event);
845 if (ACPI_SUCCESS(Status))
847 DELAY(EC_POLL_DELAY);
850 slp_ival = hz / 1000;
854 /* hz has less than 1 ms resolution so scale timeout. */
856 count = ec_timeout / (1000 / hz);
860 * Wait for the GPE to signal the status changed, checking the
861 * status register each time we get one. It's possible to get a
862 * GPE for an event we're not interested in here (i.e., SCI for
865 for (i = 0; i < count; i++) {
866 if (gen_count == sc->ec_gencount)
867 tsleep(sc, 0, "ecgpe", slp_ival);
869 * Record new generation count. It's possible the GPE was
870 * just to notify us that a query is needed and we need to
871 * wait for a second GPE to signal the completion of the
872 * event we are actually waiting for.
874 Status = EcCheckStatus(sc, "sleep", Event);
875 if (ACPI_SUCCESS(Status)) {
876 if (gen_count == sc->ec_gencount)
882 gen_count = sc->ec_gencount;
886 * We finished waiting for the GPE and it never arrived. Try to
887 * read the register once and trust whatever value we got. This is
888 * the best we can do at this point.
890 if (ACPI_FAILURE(Status))
891 Status = EcCheckStatus(sc, "sleep_end", Event);
893 if (!need_poll && no_intr > 10) {
894 device_printf(sc->ec_dev,
895 "not getting interrupts, switched to polled mode\n");
898 if (ACPI_FAILURE(Status))
899 CTR0(KTR_ACPI, "error: ec wait timed out");
904 EcCommand(struct acpi_ec_softc *sc, EC_COMMAND cmd)
911 ACPI_SERIAL_ASSERT(ec);
913 /* Don't use burst mode if user disabled it. */
914 if (!ec_burst_mode && cmd == EC_COMMAND_BURST_ENABLE)
917 /* Decide what to wait for based on command type. */
919 case EC_COMMAND_READ:
920 case EC_COMMAND_WRITE:
921 case EC_COMMAND_BURST_DISABLE:
922 event = EC_EVENT_INPUT_BUFFER_EMPTY;
924 case EC_COMMAND_QUERY:
925 case EC_COMMAND_BURST_ENABLE:
926 event = EC_EVENT_OUTPUT_BUFFER_FULL;
929 device_printf(sc->ec_dev, "EcCommand: invalid command %#x\n", cmd);
930 return (AE_BAD_PARAMETER);
934 * Ensure empty input buffer before issuing command.
935 * Use generation count of zero to force a quick check.
937 status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY, 0);
938 if (ACPI_FAILURE(status))
941 /* Run the command and wait for the chosen event. */
942 CTR1(KTR_ACPI, "ec running command %#x", cmd);
943 gen_count = sc->ec_gencount;
945 status = EcWaitEvent(sc, event, gen_count);
946 if (ACPI_SUCCESS(status)) {
947 /* If we succeeded, burst flag should now be present. */
948 if (cmd == EC_COMMAND_BURST_ENABLE) {
949 ec_status = EC_GET_CSR(sc);
950 if ((ec_status & EC_FLAG_BURST_MODE) == 0)
954 device_printf(sc->ec_dev, "EcCommand: no response to %#x\n", cmd);
959 EcRead(struct acpi_ec_softc *sc, UINT8 Address, UINT8 *Data)
965 ACPI_SERIAL_ASSERT(ec);
966 CTR1(KTR_ACPI, "ec read from %#x", Address);
968 for (retry = 0; retry < 2; retry++) {
969 status = EcCommand(sc, EC_COMMAND_READ);
970 if (ACPI_FAILURE(status))
973 gen_count = sc->ec_gencount;
974 EC_SET_DATA(sc, Address);
975 status = EcWaitEvent(sc, EC_EVENT_OUTPUT_BUFFER_FULL, gen_count);
976 if (ACPI_FAILURE(status)) {
977 if (ACPI_SUCCESS(EcCheckStatus(sc, "retr_check",
978 EC_EVENT_INPUT_BUFFER_EMPTY)))
983 *Data = EC_GET_DATA(sc);
986 device_printf(sc->ec_dev, "EcRead: failed waiting to get data\n");
991 EcWrite(struct acpi_ec_softc *sc, UINT8 Address, UINT8 Data)
996 ACPI_SERIAL_ASSERT(ec);
997 CTR2(KTR_ACPI, "ec write to %#x, data %#x", Address, Data);
999 status = EcCommand(sc, EC_COMMAND_WRITE);
1000 if (ACPI_FAILURE(status))
1003 gen_count = sc->ec_gencount;
1004 EC_SET_DATA(sc, Address);
1005 status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY, gen_count);
1006 if (ACPI_FAILURE(status)) {
1007 device_printf(sc->ec_dev, "EcWrite: failed waiting for sent address\n");
1011 gen_count = sc->ec_gencount;
1012 EC_SET_DATA(sc, Data);
1013 status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY, gen_count);
1014 if (ACPI_FAILURE(status)) {
1015 device_printf(sc->ec_dev, "EcWrite: failed waiting for sent data\n");