2 * Copyright (c) 2005 Poul-Henning Kamp
3 * Copyright (c) 2010 Alexander Motin <mav@FreeBSD.org>
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
28 #include <sys/cdefs.h>
29 __FBSDID("$FreeBSD$");
33 #if defined(__amd64__)
38 #include <sys/param.h>
41 #include <sys/kernel.h>
42 #include <sys/module.h>
48 #include <sys/sysctl.h>
49 #include <sys/timeet.h>
50 #include <sys/timetc.h>
53 #include <contrib/dev/acpica/include/acpi.h>
54 #include <contrib/dev/acpica/include/accommon.h>
56 #include <dev/acpica/acpivar.h>
57 #include <dev/acpica/acpi_hpet.h>
63 #define HPET_VENDID_AMD 0x4353
64 #define HPET_VENDID_AMD2 0x1022
65 #define HPET_VENDID_INTEL 0x8086
66 #define HPET_VENDID_NVIDIA 0x10de
67 #define HPET_VENDID_SW 0x1166
69 ACPI_SERIAL_DECL(hpet, "ACPI HPET support");
71 static devclass_t hpet_devclass;
73 /* ACPI CA debugging */
74 #define _COMPONENT ACPI_TIMER
75 ACPI_MODULE_NAME("HPET")
85 uint32_t allowed_irqs;
86 struct resource *mem_res;
87 struct resource *intr_res;
93 struct timecounter tc;
96 struct hpet_softc *sc;
99 #define TIMER_STOPPED 0
100 #define TIMER_PERIODIC 1
101 #define TIMER_ONESHOT 2
107 int pcpu_slaves[MAXCPU];
108 struct resource *intr_res;
119 int mmap_allow_write;
122 static d_open_t hpet_open;
123 static d_mmap_t hpet_mmap;
125 static struct cdevsw hpet_cdevsw = {
126 .d_version = D_VERSION,
132 static u_int hpet_get_timecount(struct timecounter *tc);
133 static void hpet_test(struct hpet_softc *sc);
135 static char *hpet_ids[] = { "PNP0103", NULL };
137 /* Knob to disable acpi_hpet device */
138 bool acpi_hpet_disabled = false;
141 hpet_get_timecount(struct timecounter *tc)
143 struct hpet_softc *sc;
146 return (bus_read_4(sc->mem_res, HPET_MAIN_COUNTER));
150 hpet_vdso_timehands(struct vdso_timehands *vdso_th, struct timecounter *tc)
152 struct hpet_softc *sc;
155 vdso_th->th_algo = VDSO_TH_ALGO_X86_HPET;
156 vdso_th->th_x86_shift = 0;
157 vdso_th->th_x86_hpet_idx = device_get_unit(sc->dev);
158 bzero(vdso_th->th_res, sizeof(vdso_th->th_res));
159 return (sc->mmap_allow != 0);
162 #ifdef COMPAT_FREEBSD32
164 hpet_vdso_timehands32(struct vdso_timehands32 *vdso_th32,
165 struct timecounter *tc)
167 struct hpet_softc *sc;
170 vdso_th32->th_algo = VDSO_TH_ALGO_X86_HPET;
171 vdso_th32->th_x86_shift = 0;
172 vdso_th32->th_x86_hpet_idx = device_get_unit(sc->dev);
173 bzero(vdso_th32->th_res, sizeof(vdso_th32->th_res));
174 return (sc->mmap_allow != 0);
179 hpet_enable(struct hpet_softc *sc)
183 val = bus_read_4(sc->mem_res, HPET_CONFIG);
184 if (sc->legacy_route)
185 val |= HPET_CNF_LEG_RT;
187 val &= ~HPET_CNF_LEG_RT;
188 val |= HPET_CNF_ENABLE;
189 bus_write_4(sc->mem_res, HPET_CONFIG, val);
193 hpet_disable(struct hpet_softc *sc)
197 val = bus_read_4(sc->mem_res, HPET_CONFIG);
198 val &= ~HPET_CNF_ENABLE;
199 bus_write_4(sc->mem_res, HPET_CONFIG, val);
203 hpet_start(struct eventtimer *et, sbintime_t first, sbintime_t period)
205 struct hpet_timer *mt = (struct hpet_timer *)et->et_priv;
206 struct hpet_timer *t;
207 struct hpet_softc *sc = mt->sc;
210 t = (mt->pcpu_master < 0) ? mt : &sc->t[mt->pcpu_slaves[curcpu]];
212 t->mode = TIMER_PERIODIC;
213 t->div = (sc->freq * period) >> 32;
215 t->mode = TIMER_ONESHOT;
219 fdiv = (sc->freq * first) >> 32;
223 bus_write_4(sc->mem_res, HPET_ISR, 1 << t->num);
224 t->caps |= HPET_TCNF_INT_ENB;
225 now = bus_read_4(sc->mem_res, HPET_MAIN_COUNTER);
227 t->next = now + fdiv;
228 if (t->mode == TIMER_PERIODIC && (t->caps & HPET_TCAP_PER_INT)) {
229 t->caps |= HPET_TCNF_TYPE;
230 bus_write_4(sc->mem_res, HPET_TIMER_CAP_CNF(t->num),
231 t->caps | HPET_TCNF_VAL_SET);
232 bus_write_4(sc->mem_res, HPET_TIMER_COMPARATOR(t->num),
234 bus_write_4(sc->mem_res, HPET_TIMER_COMPARATOR(t->num),
237 t->caps &= ~HPET_TCNF_TYPE;
238 bus_write_4(sc->mem_res, HPET_TIMER_CAP_CNF(t->num),
240 bus_write_4(sc->mem_res, HPET_TIMER_COMPARATOR(t->num),
243 now = bus_read_4(sc->mem_res, HPET_MAIN_COUNTER);
244 if ((int32_t)(now - t->next + HPET_MIN_CYCLES) >= 0) {
252 hpet_stop(struct eventtimer *et)
254 struct hpet_timer *mt = (struct hpet_timer *)et->et_priv;
255 struct hpet_timer *t;
256 struct hpet_softc *sc = mt->sc;
258 t = (mt->pcpu_master < 0) ? mt : &sc->t[mt->pcpu_slaves[curcpu]];
259 t->mode = TIMER_STOPPED;
260 t->caps &= ~(HPET_TCNF_INT_ENB | HPET_TCNF_TYPE);
261 bus_write_4(sc->mem_res, HPET_TIMER_CAP_CNF(t->num), t->caps);
266 hpet_intr_single(void *arg)
268 struct hpet_timer *t = (struct hpet_timer *)arg;
269 struct hpet_timer *mt;
270 struct hpet_softc *sc = t->sc;
273 if (t->mode == TIMER_STOPPED)
274 return (FILTER_STRAY);
275 /* Check that per-CPU timer interrupt reached right CPU. */
276 if (t->pcpu_cpu >= 0 && t->pcpu_cpu != curcpu) {
277 if ((++t->pcpu_misrouted) % 32 == 0) {
278 printf("HPET interrupt routed to the wrong CPU"
279 " (timer %d CPU %d -> %d)!\n",
280 t->num, t->pcpu_cpu, curcpu);
284 * Reload timer, hoping that next time may be more lucky
285 * (system will manage proper interrupt binding).
287 if ((t->mode == TIMER_PERIODIC &&
288 (t->caps & HPET_TCAP_PER_INT) == 0) ||
289 t->mode == TIMER_ONESHOT) {
290 t->next = bus_read_4(sc->mem_res, HPET_MAIN_COUNTER) +
292 bus_write_4(sc->mem_res, HPET_TIMER_COMPARATOR(t->num),
295 return (FILTER_HANDLED);
297 if (t->mode == TIMER_PERIODIC &&
298 (t->caps & HPET_TCAP_PER_INT) == 0) {
300 now = bus_read_4(sc->mem_res, HPET_MAIN_COUNTER);
301 if ((int32_t)((now + t->div / 2) - t->next) > 0)
302 t->next = now + t->div / 2;
303 bus_write_4(sc->mem_res,
304 HPET_TIMER_COMPARATOR(t->num), t->next);
305 } else if (t->mode == TIMER_ONESHOT)
306 t->mode = TIMER_STOPPED;
307 mt = (t->pcpu_master < 0) ? t : &sc->t[t->pcpu_master];
308 if (mt->et.et_active)
309 mt->et.et_event_cb(&mt->et, mt->et.et_arg);
310 return (FILTER_HANDLED);
316 struct hpet_softc *sc = (struct hpet_softc *)arg;
320 val = bus_read_4(sc->mem_res, HPET_ISR);
322 bus_write_4(sc->mem_res, HPET_ISR, val);
324 for (i = 0; i < sc->num_timers; i++) {
325 if ((val & (1 << i)) == 0)
327 hpet_intr_single(&sc->t[i]);
329 return (FILTER_HANDLED);
331 return (FILTER_STRAY);
335 hpet_get_uid(device_t dev)
337 struct hpet_softc *sc;
339 sc = device_get_softc(dev);
340 return (sc->acpi_uid);
344 hpet_find(ACPI_HANDLE handle, UINT32 level, void *context,
348 uint32_t id = (uint32_t)(uintptr_t)context;
351 for (ids = hpet_ids; *ids != NULL; ids++) {
352 if (acpi_MatchHid(handle, *ids))
357 if (ACPI_FAILURE(acpi_GetInteger(handle, "_UID", &uid)) ||
359 *status = acpi_get_device(handle);
364 * Find an existing IRQ resource that matches the requested IRQ range
365 * and return its RID. If one is not found, use a new RID.
368 hpet_find_irq_rid(device_t dev, u_long start, u_long end)
373 for (rid = 0;; rid++) {
374 error = bus_get_resource(dev, SYS_RES_IRQ, rid, &irq, NULL);
375 if (error != 0 || (start <= irq && irq <= end))
381 hpet_open(struct cdev *cdev, int oflags, int devtype, struct thread *td)
383 struct hpet_softc *sc;
393 hpet_mmap(struct cdev *cdev, vm_ooffset_t offset, vm_paddr_t *paddr,
394 int nprot, vm_memattr_t *memattr)
396 struct hpet_softc *sc;
399 if (offset >= rman_get_size(sc->mem_res))
401 if (!sc->mmap_allow_write && (nprot & PROT_WRITE))
403 *paddr = rman_get_start(sc->mem_res) + offset;
404 *memattr = VM_MEMATTR_UNCACHEABLE;
409 /* Discover the HPET via the ACPI table of the same name. */
411 hpet_identify(driver_t *driver, device_t parent)
413 ACPI_TABLE_HPET *hpet;
418 /* Only one HPET device can be added. */
419 if (devclass_get_device(hpet_devclass, 0))
422 /* Search for HPET table. */
423 status = AcpiGetTable(ACPI_SIG_HPET, i, (ACPI_TABLE_HEADER **)&hpet);
424 if (ACPI_FAILURE(status))
426 /* Search for HPET device with same ID. */
428 AcpiWalkNamespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
429 100, hpet_find, NULL, (void *)(uintptr_t)hpet->Sequence,
431 /* If found - let it be probed in normal way. */
433 if (bus_get_resource(child, SYS_RES_MEMORY, 0,
435 bus_set_resource(child, SYS_RES_MEMORY, 0,
436 hpet->Address.Address, HPET_MEM_WIDTH);
439 /* If not - create it from table info. */
440 child = BUS_ADD_CHILD(parent, 2, "hpet", 0);
442 printf("%s: can't add child\n", __func__);
445 bus_set_resource(child, SYS_RES_MEMORY, 0, hpet->Address.Address,
451 hpet_probe(device_t dev)
455 ACPI_FUNCTION_TRACE((char *)(uintptr_t) __func__);
456 if (acpi_disabled("hpet") || acpi_hpet_disabled)
458 if (acpi_get_handle(dev) != NULL)
459 rv = ACPI_ID_PROBE(device_get_parent(dev), dev, hpet_ids, NULL);
463 device_set_desc(dev, "High Precision Event Timer");
468 hpet_attach(device_t dev)
470 struct hpet_softc *sc;
471 struct hpet_timer *t;
472 struct make_dev_args mda;
473 int i, j, num_msi, num_timers, num_percpu_et, num_percpu_t, cur_cpu;
474 int pcpu_master, error;
475 static int maxhpetet = 0;
476 uint32_t val, val2, cvectors, dvectors;
477 uint16_t vendor, rev;
479 ACPI_FUNCTION_TRACE((char *)(uintptr_t) __func__);
481 sc = device_get_softc(dev);
483 sc->handle = acpi_get_handle(dev);
486 sc->mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &sc->mem_rid,
488 if (sc->mem_res == NULL)
491 /* Validate that we can access the whole region. */
492 if (rman_get_size(sc->mem_res) < HPET_MEM_WIDTH) {
493 device_printf(dev, "memory region width %jd too small\n",
494 rman_get_size(sc->mem_res));
495 bus_free_resource(dev, SYS_RES_MEMORY, sc->mem_res);
499 /* Be sure timer is enabled. */
502 /* Read basic statistics about the timer. */
503 val = bus_read_4(sc->mem_res, HPET_PERIOD);
505 device_printf(dev, "invalid period\n");
507 bus_free_resource(dev, SYS_RES_MEMORY, sc->mem_res);
511 sc->freq = (1000000000000000LL + val / 2) / val;
512 sc->caps = bus_read_4(sc->mem_res, HPET_CAPABILITIES);
513 vendor = (sc->caps & HPET_CAP_VENDOR_ID) >> 16;
514 rev = sc->caps & HPET_CAP_REV_ID;
515 num_timers = 1 + ((sc->caps & HPET_CAP_NUM_TIM) >> 8);
517 * ATI/AMD violates IA-PC HPET (High Precision Event Timers)
518 * Specification and provides an off by one number
519 * of timers/comparators.
520 * Additionally, they use unregistered value in VENDOR_ID field.
522 if (vendor == HPET_VENDID_AMD && rev < 0x10 && num_timers > 0)
524 sc->num_timers = num_timers;
527 "vendor 0x%x, rev 0x%x, %jdHz%s, %d timers,%s\n",
528 vendor, rev, sc->freq,
529 (sc->caps & HPET_CAP_COUNT_SIZE) ? " 64bit" : "",
531 (sc->caps & HPET_CAP_LEG_RT) ? " legacy route" : "");
533 for (i = 0; i < num_timers; i++) {
537 t->mode = TIMER_STOPPED;
541 t->pcpu_misrouted = 0;
543 t->caps = bus_read_4(sc->mem_res, HPET_TIMER_CAP_CNF(i));
544 t->vectors = bus_read_4(sc->mem_res, HPET_TIMER_CAP_CNF(i) + 4);
547 " t%d: irqs 0x%08x (%d)%s%s%s\n", i,
548 t->vectors, (t->caps & HPET_TCNF_INT_ROUTE) >> 9,
549 (t->caps & HPET_TCAP_FSB_INT_DEL) ? ", MSI" : "",
550 (t->caps & HPET_TCAP_SIZE) ? ", 64bit" : "",
551 (t->caps & HPET_TCAP_PER_INT) ? ", periodic" : "");
554 if (testenv("debug.acpi.hpet_test"))
557 * Don't attach if the timer never increments. Since the spec
558 * requires it to be at least 10 MHz, it has to change in 1 us.
560 val = bus_read_4(sc->mem_res, HPET_MAIN_COUNTER);
562 val2 = bus_read_4(sc->mem_res, HPET_MAIN_COUNTER);
564 device_printf(dev, "HPET never increments, disabling\n");
566 bus_free_resource(dev, SYS_RES_MEMORY, sc->mem_res);
569 /* Announce first HPET as timecounter. */
570 if (device_get_unit(dev) == 0) {
571 sc->tc.tc_get_timecount = hpet_get_timecount,
572 sc->tc.tc_counter_mask = ~0u,
573 sc->tc.tc_name = "HPET",
574 sc->tc.tc_quality = 950,
575 sc->tc.tc_frequency = sc->freq;
577 sc->tc.tc_fill_vdso_timehands = hpet_vdso_timehands;
578 #ifdef COMPAT_FREEBSD32
579 sc->tc.tc_fill_vdso_timehands32 = hpet_vdso_timehands32;
583 /* If not disabled - setup and announce event timers. */
584 if (resource_int_value(device_get_name(dev), device_get_unit(dev),
585 "clock", &i) == 0 && i == 0)
588 /* Check whether we can and want legacy routing. */
589 sc->legacy_route = 0;
590 resource_int_value(device_get_name(dev), device_get_unit(dev),
591 "legacy_route", &sc->legacy_route);
592 if ((sc->caps & HPET_CAP_LEG_RT) == 0)
593 sc->legacy_route = 0;
594 if (sc->legacy_route) {
595 sc->t[0].vectors = 0;
596 sc->t[1].vectors = 0;
599 /* Check what IRQs we want use. */
600 /* By default allow any PCI IRQs. */
601 sc->allowed_irqs = 0xffff0000;
603 * HPETs in AMD chipsets before SB800 have problems with IRQs >= 16
604 * Lower are also not always working for different reasons.
605 * SB800 fixed it, but seems do not implements level triggering
606 * properly, that makes it very unreliable - it freezes after any
607 * interrupt loss. Avoid legacy IRQs for AMD.
609 if (vendor == HPET_VENDID_AMD || vendor == HPET_VENDID_AMD2)
610 sc->allowed_irqs = 0x00000000;
612 * NVidia MCP5x chipsets have number of unexplained interrupt
613 * problems. For some reason, using HPET interrupts breaks HDA sound.
615 if (vendor == HPET_VENDID_NVIDIA && rev <= 0x01)
616 sc->allowed_irqs = 0x00000000;
618 * ServerWorks HT1000 reported to have problems with IRQs >= 16.
619 * Lower IRQs are working, but allowed mask is not set correctly.
620 * Legacy_route mode works fine.
622 if (vendor == HPET_VENDID_SW && rev <= 0x01)
623 sc->allowed_irqs = 0x00000000;
625 * Neither QEMU nor VirtualBox report supported IRQs correctly.
626 * The only way to use HPET there is to specify IRQs manually
627 * and/or use legacy_route. Legacy_route mode works on both.
630 sc->allowed_irqs = 0x00000000;
631 /* Let user override. */
632 resource_int_value(device_get_name(dev), device_get_unit(dev),
633 "allowed_irqs", &sc->allowed_irqs);
635 /* Get how much per-CPU timers we should try to provide. */
637 resource_int_value(device_get_name(dev), device_get_unit(dev),
638 "per_cpu", &sc->per_cpu);
642 /* Find IRQ vectors for all timers. */
643 cvectors = sc->allowed_irqs & 0xffff0000;
644 dvectors = sc->allowed_irqs & 0x0000ffff;
645 if (sc->legacy_route)
646 dvectors &= 0x0000fefe;
647 for (i = 0; i < num_timers; i++) {
649 if (sc->legacy_route && i < 2)
650 t->irq = (i == 0) ? 0 : 8;
652 else if (t->caps & HPET_TCAP_FSB_INT_DEL) {
653 if ((j = PCIB_ALLOC_MSIX(
654 device_get_parent(device_get_parent(dev)), dev,
657 "Can't allocate interrupt for t%d: %d\n",
662 else if (dvectors & t->vectors) {
663 t->irq = ffs(dvectors & t->vectors) - 1;
664 dvectors &= ~(1 << t->irq);
667 t->intr_rid = hpet_find_irq_rid(dev, t->irq, t->irq);
668 t->intr_res = bus_alloc_resource(dev, SYS_RES_IRQ,
669 &t->intr_rid, t->irq, t->irq, 1, RF_ACTIVE);
670 if (t->intr_res == NULL) {
673 "Can't map interrupt for t%d.\n", i);
674 } else if (bus_setup_intr(dev, t->intr_res,
675 INTR_TYPE_CLK, hpet_intr_single, NULL, t,
676 &t->intr_handle) != 0) {
679 "Can't setup interrupt for t%d.\n", i);
681 bus_describe_intr(dev, t->intr_res,
682 t->intr_handle, "t%d", i);
686 if (t->irq < 0 && (cvectors & t->vectors) != 0) {
687 cvectors &= t->vectors;
688 sc->useirq |= (1 << i);
691 if (sc->legacy_route && sc->t[0].irq < 0 && sc->t[1].irq < 0)
692 sc->legacy_route = 0;
693 if (sc->legacy_route)
695 /* Group timers for per-CPU operation. */
696 num_percpu_et = min(num_msi / mp_ncpus, sc->per_cpu);
697 num_percpu_t = num_percpu_et * mp_ncpus;
699 cur_cpu = CPU_FIRST();
700 for (i = 0; i < num_timers; i++) {
702 if (t->irq >= 0 && num_percpu_t > 0) {
703 if (cur_cpu == CPU_FIRST())
705 t->pcpu_cpu = cur_cpu;
706 t->pcpu_master = pcpu_master;
708 pcpu_slaves[cur_cpu] = i;
709 bus_bind_intr(dev, t->intr_res, cur_cpu);
710 cur_cpu = CPU_NEXT(cur_cpu);
712 } else if (t->irq >= 0)
713 bus_bind_intr(dev, t->intr_res, CPU_FIRST());
715 bus_write_4(sc->mem_res, HPET_ISR, 0xffffffff);
717 /* If at least one timer needs legacy IRQ - set it up. */
719 j = i = fls(cvectors) - 1;
720 while (j > 0 && (cvectors & (1 << (j - 1))) != 0)
722 sc->intr_rid = hpet_find_irq_rid(dev, j, i);
723 sc->intr_res = bus_alloc_resource(dev, SYS_RES_IRQ,
724 &sc->intr_rid, j, i, 1, RF_SHAREABLE | RF_ACTIVE);
725 if (sc->intr_res == NULL)
726 device_printf(dev, "Can't map interrupt.\n");
727 else if (bus_setup_intr(dev, sc->intr_res, INTR_TYPE_CLK,
728 hpet_intr, NULL, sc, &sc->intr_handle) != 0) {
729 device_printf(dev, "Can't setup interrupt.\n");
731 sc->irq = rman_get_start(sc->intr_res);
732 /* Bind IRQ to BSP to avoid live migration. */
733 bus_bind_intr(dev, sc->intr_res, CPU_FIRST());
736 /* Program and announce event timers. */
737 for (i = 0; i < num_timers; i++) {
739 t->caps &= ~(HPET_TCNF_FSB_EN | HPET_TCNF_INT_ROUTE);
740 t->caps &= ~(HPET_TCNF_VAL_SET | HPET_TCNF_INT_ENB);
741 t->caps &= ~(HPET_TCNF_INT_TYPE);
742 t->caps |= HPET_TCNF_32MODE;
743 if (t->irq >= 0 && sc->legacy_route && i < 2) {
744 /* Legacy route doesn't need more configuration. */
747 if ((t->caps & HPET_TCAP_FSB_INT_DEL) && t->irq >= 0) {
752 device_get_parent(device_get_parent(dev)), dev,
753 t->irq, &addr, &data) == 0) {
754 bus_write_4(sc->mem_res,
755 HPET_TIMER_FSB_ADDR(i), addr);
756 bus_write_4(sc->mem_res,
757 HPET_TIMER_FSB_VAL(i), data);
758 t->caps |= HPET_TCNF_FSB_EN;
764 t->caps |= (t->irq << 9);
765 else if (sc->irq >= 0 && (t->vectors & (1 << sc->irq)))
766 t->caps |= (sc->irq << 9) | HPET_TCNF_INT_TYPE;
767 bus_write_4(sc->mem_res, HPET_TIMER_CAP_CNF(i), t->caps);
768 /* Skip event timers without set up IRQ. */
770 (sc->irq < 0 || (t->vectors & (1 << sc->irq)) == 0))
772 /* Announce the reset. */
774 t->et.et_name = "HPET";
776 sprintf(t->name, "HPET%d", maxhpetet);
777 t->et.et_name = t->name;
779 t->et.et_flags = ET_FLAGS_PERIODIC | ET_FLAGS_ONESHOT;
780 t->et.et_quality = 450;
781 if (t->pcpu_master >= 0) {
782 t->et.et_flags |= ET_FLAGS_PERCPU;
783 t->et.et_quality += 100;
784 } else if (mp_ncpus >= 8)
785 t->et.et_quality -= 100;
786 if ((t->caps & HPET_TCAP_PER_INT) == 0)
787 t->et.et_quality -= 10;
788 t->et.et_frequency = sc->freq;
789 t->et.et_min_period =
790 ((uint64_t)(HPET_MIN_CYCLES * 2) << 32) / sc->freq;
791 t->et.et_max_period = (0xfffffffeLLU << 32) / sc->freq;
792 t->et.et_start = hpet_start;
793 t->et.et_stop = hpet_stop;
794 t->et.et_priv = &sc->t[i];
795 if (t->pcpu_master < 0 || t->pcpu_master == i) {
800 acpi_GetInteger(sc->handle, "_UID", &sc->acpi_uid);
802 make_dev_args_init(&mda);
803 mda.mda_devsw = &hpet_cdevsw;
804 mda.mda_uid = UID_ROOT;
805 mda.mda_gid = GID_WHEEL;
807 mda.mda_si_drv1 = sc;
808 error = make_dev_s(&mda, &sc->pdev, "hpet%d", device_get_unit(dev));
811 TUNABLE_INT_FETCH("hw.acpi.hpet.mmap_allow",
813 sc->mmap_allow_write = 0;
814 TUNABLE_INT_FETCH("hw.acpi.hpet.mmap_allow_write",
815 &sc->mmap_allow_write);
816 SYSCTL_ADD_INT(device_get_sysctl_ctx(dev),
817 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
818 OID_AUTO, "mmap_allow",
819 CTLFLAG_RW, &sc->mmap_allow, 0,
820 "Allow userland to memory map HPET");
821 SYSCTL_ADD_INT(device_get_sysctl_ctx(dev),
822 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
823 OID_AUTO, "mmap_allow_write",
824 CTLFLAG_RW, &sc->mmap_allow_write, 0,
825 "Allow userland write to the HPET register space");
827 device_printf(dev, "could not create /dev/hpet%d, error %d\n",
828 device_get_unit(dev), error);
835 hpet_detach(device_t dev)
837 ACPI_FUNCTION_TRACE((char *)(uintptr_t) __func__);
839 /* XXX Without a tc_remove() function, we can't detach. */
844 hpet_suspend(device_t dev)
846 // struct hpet_softc *sc;
849 * Disable the timer during suspend. The timer will not lose
850 * its state in S1 or S2, but we are required to disable
853 // sc = device_get_softc(dev);
860 hpet_resume(device_t dev)
862 struct hpet_softc *sc;
863 struct hpet_timer *t;
866 /* Re-enable the timer after a resume to keep the clock advancing. */
867 sc = device_get_softc(dev);
869 /* Restart event timers that were running on suspend. */
870 for (i = 0; i < sc->num_timers; i++) {
873 if (t->irq >= 0 && (sc->legacy_route == 0 || i >= 2)) {
878 device_get_parent(device_get_parent(dev)), dev,
879 t->irq, &addr, &data) == 0) {
880 bus_write_4(sc->mem_res,
881 HPET_TIMER_FSB_ADDR(i), addr);
882 bus_write_4(sc->mem_res,
883 HPET_TIMER_FSB_VAL(i), data);
887 if (t->mode == TIMER_STOPPED)
889 t->next = bus_read_4(sc->mem_res, HPET_MAIN_COUNTER);
890 if (t->mode == TIMER_PERIODIC &&
891 (t->caps & HPET_TCAP_PER_INT) != 0) {
892 t->caps |= HPET_TCNF_TYPE;
894 bus_write_4(sc->mem_res, HPET_TIMER_CAP_CNF(t->num),
895 t->caps | HPET_TCNF_VAL_SET);
896 bus_write_4(sc->mem_res, HPET_TIMER_COMPARATOR(t->num),
898 bus_read_4(sc->mem_res, HPET_TIMER_COMPARATOR(t->num));
899 bus_write_4(sc->mem_res, HPET_TIMER_COMPARATOR(t->num),
902 t->next += sc->freq / 1024;
903 bus_write_4(sc->mem_res, HPET_TIMER_COMPARATOR(t->num),
906 bus_write_4(sc->mem_res, HPET_ISR, 1 << t->num);
907 bus_write_4(sc->mem_res, HPET_TIMER_CAP_CNF(t->num), t->caps);
912 /* Print some basic latency/rate information to assist in debugging. */
914 hpet_test(struct hpet_softc *sc)
918 struct bintime b0, b1, b2;
924 u1 = bus_read_4(sc->mem_res, HPET_MAIN_COUNTER);
925 for (i = 1; i < 1000; i++)
926 u2 = bus_read_4(sc->mem_res, HPET_MAIN_COUNTER);
928 u2 = bus_read_4(sc->mem_res, HPET_MAIN_COUNTER);
930 bintime_sub(&b2, &b1);
931 bintime_sub(&b1, &b0);
932 bintime_sub(&b2, &b1);
933 bintime2timespec(&b2, &ts);
935 device_printf(sc->dev, "%ld.%09ld: %u ... %u = %u\n",
936 (long)ts.tv_sec, ts.tv_nsec, u1, u2, u2 - u1);
938 device_printf(sc->dev, "time per call: %ld ns\n", ts.tv_nsec / 1000);
943 hpet_remap_intr(device_t dev, device_t child, u_int irq)
945 struct hpet_softc *sc = device_get_softc(dev);
946 struct hpet_timer *t;
951 for (i = 0; i < sc->num_timers; i++) {
955 error = PCIB_MAP_MSI(
956 device_get_parent(device_get_parent(dev)), dev,
960 hpet_disable(sc); /* Stop timer to avoid interrupt loss. */
961 bus_write_4(sc->mem_res, HPET_TIMER_FSB_ADDR(i), addr);
962 bus_write_4(sc->mem_res, HPET_TIMER_FSB_VAL(i), data);
970 static device_method_t hpet_methods[] = {
971 /* Device interface */
972 DEVMETHOD(device_identify, hpet_identify),
973 DEVMETHOD(device_probe, hpet_probe),
974 DEVMETHOD(device_attach, hpet_attach),
975 DEVMETHOD(device_detach, hpet_detach),
976 DEVMETHOD(device_suspend, hpet_suspend),
977 DEVMETHOD(device_resume, hpet_resume),
980 DEVMETHOD(bus_remap_intr, hpet_remap_intr),
986 static driver_t hpet_driver = {
989 sizeof(struct hpet_softc),
992 DRIVER_MODULE(hpet, acpi, hpet_driver, hpet_devclass, 0, 0);
993 MODULE_DEPEND(hpet, acpi, 1, 1, 1);