2 * Generic driver for the Advanced Systems Inc. SCSI controllers
3 * Product specific probe and attach routines can be found in:
5 * i386/isa/adv_isa.c ABP5140, ABP542, ABP5150, ABP842, ABP852
6 * pci/adv_pci.c ABP920, ABP930, ABP930U, ABP930UA, ABP940, ABP940U,
7 * ABP940UA, ABP950, ABP960, ABP960U, ABP960UA,
10 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
12 * Copyright (c) 1996-2000 Justin Gibbs.
13 * All rights reserved.
15 * Redistribution and use in source and binary forms, with or without
16 * modification, are permitted provided that the following conditions
18 * 1. Redistributions of source code must retain the above copyright
19 * notice, this list of conditions, and the following disclaimer,
20 * without modification, immediately at the beginning of the file.
21 * 2. The name of the author may not be used to endorse or promote products
22 * derived from this software without specific prior written permission.
24 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
25 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
28 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
30 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
31 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
32 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
33 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
38 * advansys.c - Linux Host Driver for AdvanSys SCSI Adapters
40 * Copyright (c) 1995-1997 Advanced System Products, Inc.
41 * All Rights Reserved.
43 * Redistribution and use in source and binary forms, with or without
44 * modification, are permitted provided that redistributions of source
45 * code retain the above copyright notice and this comment without
49 #include <sys/cdefs.h>
50 __FBSDID("$FreeBSD$");
52 #include <sys/param.h>
54 #include <sys/systm.h>
55 #include <sys/malloc.h>
56 #include <sys/kernel.h>
58 #include <sys/module.h>
59 #include <sys/mutex.h>
61 #include <machine/bus.h>
62 #include <machine/resource.h>
67 #include <cam/cam_ccb.h>
68 #include <cam/cam_sim.h>
69 #include <cam/cam_xpt_sim.h>
70 #include <cam/cam_debug.h>
72 #include <cam/scsi/scsi_all.h>
73 #include <cam/scsi/scsi_message.h>
76 #include <vm/vm_param.h>
79 #include <dev/advansys/advansys.h>
81 static void adv_action(struct cam_sim *sim, union ccb *ccb);
82 static void adv_execute_ccb(void *arg, bus_dma_segment_t *dm_segs,
83 int nsegments, int error);
84 static void adv_intr_locked(struct adv_softc *adv);
85 static void adv_poll(struct cam_sim *sim);
86 static void adv_run_doneq(struct adv_softc *adv);
87 static struct adv_ccb_info *
88 adv_alloc_ccb_info(struct adv_softc *adv);
89 static void adv_destroy_ccb_info(struct adv_softc *adv,
90 struct adv_ccb_info *cinfo);
91 static __inline struct adv_ccb_info *
92 adv_get_ccb_info(struct adv_softc *adv);
93 static __inline void adv_free_ccb_info(struct adv_softc *adv,
94 struct adv_ccb_info *cinfo);
95 static __inline void adv_set_state(struct adv_softc *adv, adv_state state);
96 static __inline void adv_clear_state(struct adv_softc *adv, union ccb* ccb);
97 static void adv_clear_state_really(struct adv_softc *adv, union ccb* ccb);
99 static __inline struct adv_ccb_info *
100 adv_get_ccb_info(struct adv_softc *adv)
102 struct adv_ccb_info *cinfo;
105 mtx_assert(&adv->lock, MA_OWNED);
106 if ((cinfo = SLIST_FIRST(&adv->free_ccb_infos)) != NULL) {
107 SLIST_REMOVE_HEAD(&adv->free_ccb_infos, links);
109 cinfo = adv_alloc_ccb_info(adv);
116 adv_free_ccb_info(struct adv_softc *adv, struct adv_ccb_info *cinfo)
120 mtx_assert(&adv->lock, MA_OWNED);
121 cinfo->state = ACCB_FREE;
122 SLIST_INSERT_HEAD(&adv->free_ccb_infos, cinfo, links);
126 adv_set_state(struct adv_softc *adv, adv_state state)
129 xpt_freeze_simq(adv->sim, /*count*/1);
134 adv_clear_state(struct adv_softc *adv, union ccb* ccb)
137 adv_clear_state_really(adv, ccb);
141 adv_clear_state_really(struct adv_softc *adv, union ccb* ccb)
145 mtx_assert(&adv->lock, MA_OWNED);
146 if ((adv->state & ADV_BUSDMA_BLOCK_CLEARED) != 0)
147 adv->state &= ~(ADV_BUSDMA_BLOCK_CLEARED|ADV_BUSDMA_BLOCK);
148 if ((adv->state & ADV_RESOURCE_SHORTAGE) != 0) {
151 openings = adv->max_openings - adv->cur_active - ADV_MIN_FREE_Q;
152 if (openings >= adv->openings_needed) {
153 adv->state &= ~ADV_RESOURCE_SHORTAGE;
154 adv->openings_needed = 0;
158 if ((adv->state & ADV_IN_TIMEOUT) != 0) {
159 struct adv_ccb_info *cinfo;
161 cinfo = (struct adv_ccb_info *)ccb->ccb_h.ccb_cinfo_ptr;
162 if ((cinfo->state & ACCB_RECOVERY_CCB) != 0) {
163 struct ccb_hdr *ccb_h;
166 * We now traverse our list of pending CCBs
167 * and reinstate their timeouts.
169 ccb_h = LIST_FIRST(&adv->pending_ccbs);
170 while (ccb_h != NULL) {
171 cinfo = ccb_h->ccb_cinfo_ptr;
172 callout_reset_sbt(&cinfo->timer,
173 SBT_1MS * ccb_h->timeout, 0,
174 adv_timeout, ccb_h, 0);
175 ccb_h = LIST_NEXT(ccb_h, sim_links.le);
177 adv->state &= ~ADV_IN_TIMEOUT;
178 device_printf(adv->dev, "No longer in timeout\n");
182 ccb->ccb_h.status |= CAM_RELEASE_SIMQ;
186 adv_map(void *arg, bus_dma_segment_t *segs, int nseg, int error)
188 bus_addr_t* physaddr;
190 physaddr = (bus_addr_t*)arg;
191 *physaddr = segs->ds_addr;
195 adv_action(struct cam_sim *sim, union ccb *ccb)
197 struct adv_softc *adv;
199 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("adv_action\n"));
201 adv = (struct adv_softc *)cam_sim_softc(sim);
202 mtx_assert(&adv->lock, MA_OWNED);
204 switch (ccb->ccb_h.func_code) {
205 /* Common cases first */
206 case XPT_SCSI_IO: /* Execute the requested I/O operation */
208 struct ccb_hdr *ccb_h;
209 struct ccb_scsiio *csio;
210 struct adv_ccb_info *cinfo;
215 cinfo = adv_get_ccb_info(adv);
217 panic("XXX Handle CCB info error!!!");
219 ccb_h->ccb_cinfo_ptr = cinfo;
222 error = bus_dmamap_load_ccb(adv->buffer_dmat,
227 if (error == EINPROGRESS) {
229 * So as to maintain ordering, freeze the controller
230 * queue until our mapping is returned.
232 adv_set_state(adv, ADV_BUSDMA_BLOCK);
236 case XPT_RESET_DEV: /* Bus Device Reset the specified SCSI device */
237 case XPT_ABORT: /* Abort the specified CCB */
239 ccb->ccb_h.status = CAM_REQ_INVALID;
242 #define IS_CURRENT_SETTINGS(c) (c->type == CTS_TYPE_CURRENT_SETTINGS)
243 #define IS_USER_SETTINGS(c) (c->type == CTS_TYPE_USER_SETTINGS)
244 case XPT_SET_TRAN_SETTINGS:
246 struct ccb_trans_settings_scsi *scsi;
247 struct ccb_trans_settings_spi *spi;
248 struct ccb_trans_settings *cts;
249 target_bit_vector targ_mask;
250 struct adv_transinfo *tconf;
254 targ_mask = ADV_TID_TO_TARGET_MASK(cts->ccb_h.target_id);
258 * The user must specify which type of settings he wishes
261 if (IS_CURRENT_SETTINGS(cts) && !IS_USER_SETTINGS(cts)) {
262 tconf = &adv->tinfo[cts->ccb_h.target_id].current;
263 update_type |= ADV_TRANS_GOAL;
264 } else if (IS_USER_SETTINGS(cts) && !IS_CURRENT_SETTINGS(cts)) {
265 tconf = &adv->tinfo[cts->ccb_h.target_id].user;
266 update_type |= ADV_TRANS_USER;
268 ccb->ccb_h.status = CAM_REQ_INVALID;
272 scsi = &cts->proto_specific.scsi;
273 spi = &cts->xport_specific.spi;
274 if ((update_type & ADV_TRANS_GOAL) != 0) {
275 if ((spi->valid & CTS_SPI_VALID_DISC) != 0) {
276 if ((spi->flags & CTS_SPI_FLAGS_DISC_ENB) != 0)
277 adv->disc_enable |= targ_mask;
279 adv->disc_enable &= ~targ_mask;
280 adv_write_lram_8(adv, ADVV_DISC_ENABLE_B,
284 if ((scsi->valid & CTS_SCSI_VALID_TQ) != 0) {
285 if ((scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0)
286 adv->cmd_qng_enabled |= targ_mask;
288 adv->cmd_qng_enabled &= ~targ_mask;
292 if ((update_type & ADV_TRANS_USER) != 0) {
293 if ((spi->valid & CTS_SPI_VALID_DISC) != 0) {
294 if ((spi->flags & CTS_SPI_VALID_DISC) != 0)
295 adv->user_disc_enable |= targ_mask;
297 adv->user_disc_enable &= ~targ_mask;
300 if ((scsi->valid & CTS_SCSI_VALID_TQ) != 0) {
301 if ((scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0)
302 adv->user_cmd_qng_enabled |= targ_mask;
304 adv->user_cmd_qng_enabled &= ~targ_mask;
309 * If the user specifies either the sync rate, or offset,
310 * but not both, the unspecified parameter defaults to its
311 * current value in transfer negotiations.
313 if (((spi->valid & CTS_SPI_VALID_SYNC_RATE) != 0)
314 || ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) != 0)) {
316 * If the user provided a sync rate but no offset,
317 * use the current offset.
319 if ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) == 0)
320 spi->sync_offset = tconf->offset;
323 * If the user provided an offset but no sync rate,
324 * use the current sync rate.
326 if ((spi->valid & CTS_SPI_VALID_SYNC_RATE) == 0)
327 spi->sync_period = tconf->period;
329 adv_period_offset_to_sdtr(adv, &spi->sync_period,
331 cts->ccb_h.target_id);
333 adv_set_syncrate(adv, /*struct cam_path */NULL,
334 cts->ccb_h.target_id, spi->sync_period,
335 spi->sync_offset, update_type);
338 ccb->ccb_h.status = CAM_REQ_CMP;
342 case XPT_GET_TRAN_SETTINGS:
343 /* Get default/user set transfer settings for the target */
345 struct ccb_trans_settings_scsi *scsi;
346 struct ccb_trans_settings_spi *spi;
347 struct ccb_trans_settings *cts;
348 struct adv_transinfo *tconf;
349 target_bit_vector target_mask;
352 target_mask = ADV_TID_TO_TARGET_MASK(cts->ccb_h.target_id);
354 scsi = &cts->proto_specific.scsi;
355 spi = &cts->xport_specific.spi;
357 cts->protocol = PROTO_SCSI;
358 cts->protocol_version = SCSI_REV_2;
359 cts->transport = XPORT_SPI;
360 cts->transport_version = 2;
362 scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB;
363 spi->flags &= ~CTS_SPI_FLAGS_DISC_ENB;
365 if (cts->type == CTS_TYPE_CURRENT_SETTINGS) {
366 tconf = &adv->tinfo[cts->ccb_h.target_id].current;
367 if ((adv->disc_enable & target_mask) != 0)
368 spi->flags |= CTS_SPI_FLAGS_DISC_ENB;
369 if ((adv->cmd_qng_enabled & target_mask) != 0)
370 scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB;
372 tconf = &adv->tinfo[cts->ccb_h.target_id].user;
373 if ((adv->user_disc_enable & target_mask) != 0)
374 spi->flags |= CTS_SPI_FLAGS_DISC_ENB;
375 if ((adv->user_cmd_qng_enabled & target_mask) != 0)
376 scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB;
378 spi->sync_period = tconf->period;
379 spi->sync_offset = tconf->offset;
380 spi->bus_width = MSG_EXT_WDTR_BUS_8_BIT;
381 spi->valid = CTS_SPI_VALID_SYNC_RATE
382 | CTS_SPI_VALID_SYNC_OFFSET
383 | CTS_SPI_VALID_BUS_WIDTH
384 | CTS_SPI_VALID_DISC;
385 scsi->valid = CTS_SCSI_VALID_TQ;
386 ccb->ccb_h.status = CAM_REQ_CMP;
390 case XPT_CALC_GEOMETRY:
394 extended = (adv->control & ADV_CNTL_BIOS_GT_1GB) != 0;
395 cam_calc_geometry(&ccb->ccg, extended);
399 case XPT_RESET_BUS: /* Reset the specified SCSI bus */
402 adv_stop_execution(adv);
403 adv_reset_bus(adv, /*initiate_reset*/TRUE);
404 adv_start_execution(adv);
406 ccb->ccb_h.status = CAM_REQ_CMP;
410 case XPT_TERM_IO: /* Terminate the I/O process */
412 ccb->ccb_h.status = CAM_REQ_INVALID;
415 case XPT_PATH_INQ: /* Path routing inquiry */
417 struct ccb_pathinq *cpi = &ccb->cpi;
419 cpi->version_num = 1; /* XXX??? */
420 cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE;
421 cpi->target_sprt = 0;
423 cpi->hba_eng_cnt = 0;
426 cpi->initiator_id = adv->scsi_id;
427 cpi->bus_id = cam_sim_bus(sim);
428 cpi->base_transfer_speed = 3300;
429 strlcpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
430 strlcpy(cpi->hba_vid, "Advansys", HBA_IDLEN);
431 strlcpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
432 cpi->unit_number = cam_sim_unit(sim);
433 cpi->ccb_h.status = CAM_REQ_CMP;
434 cpi->transport = XPORT_SPI;
435 cpi->transport_version = 2;
436 cpi->protocol = PROTO_SCSI;
437 cpi->protocol_version = SCSI_REV_2;
442 ccb->ccb_h.status = CAM_REQ_INVALID;
449 * Currently, the output of bus_dmammap_load suits our needs just
450 * fine, but should it change, we'd need to do something here.
452 #define adv_fixup_dmasegs(adv, dm_segs) (struct adv_sg_entry *)(dm_segs)
455 adv_execute_ccb(void *arg, bus_dma_segment_t *dm_segs,
456 int nsegments, int error)
458 struct ccb_scsiio *csio;
459 struct ccb_hdr *ccb_h;
461 struct adv_softc *adv;
462 struct adv_ccb_info *cinfo;
463 struct adv_scsi_q scsiq;
464 struct adv_sg_head sghead;
466 csio = (struct ccb_scsiio *)arg;
467 ccb_h = &csio->ccb_h;
468 sim = xpt_path_sim(ccb_h->path);
469 adv = (struct adv_softc *)cam_sim_softc(sim);
470 cinfo = (struct adv_ccb_info *)csio->ccb_h.ccb_cinfo_ptr;
472 mtx_assert(&adv->lock, MA_OWNED);
475 * Setup our done routine to release the simq on
476 * the next ccb that completes.
478 if ((adv->state & ADV_BUSDMA_BLOCK) != 0)
479 adv->state |= ADV_BUSDMA_BLOCK_CLEARED;
481 if ((ccb_h->flags & CAM_CDB_POINTER) != 0) {
482 if ((ccb_h->flags & CAM_CDB_PHYS) == 0) {
483 /* XXX Need phystovirt!!!! */
484 /* How about pmap_kenter??? */
485 scsiq.cdbptr = csio->cdb_io.cdb_ptr;
487 scsiq.cdbptr = csio->cdb_io.cdb_ptr;
490 scsiq.cdbptr = csio->cdb_io.cdb_bytes;
493 * Build up the request
498 scsiq.q1.sg_queue_cnt = 0;
499 scsiq.q1.target_id = ADV_TID_TO_TARGET_MASK(ccb_h->target_id);
500 scsiq.q1.target_lun = ccb_h->target_lun;
501 scsiq.q1.sense_len = csio->sense_len;
502 scsiq.q1.extra_bytes = 0;
503 scsiq.q2.ccb_index = cinfo - adv->ccb_infos;
504 scsiq.q2.target_ix = ADV_TIDLUN_TO_IX(ccb_h->target_id,
507 scsiq.q2.cdb_len = csio->cdb_len;
508 if ((ccb_h->flags & CAM_TAG_ACTION_VALID) != 0)
509 scsiq.q2.tag_code = csio->tag_action;
511 scsiq.q2.tag_code = 0;
514 if (nsegments != 0) {
517 scsiq.q1.data_addr = dm_segs->ds_addr;
518 scsiq.q1.data_cnt = dm_segs->ds_len;
520 scsiq.q1.cntl |= QC_SG_HEAD;
522 = sghead.entry_to_copy
525 sghead.sg_list = adv_fixup_dmasegs(adv, dm_segs);
526 scsiq.sg_head = &sghead;
528 scsiq.sg_head = NULL;
530 if ((ccb_h->flags & CAM_DIR_MASK) == CAM_DIR_IN)
531 op = BUS_DMASYNC_PREREAD;
533 op = BUS_DMASYNC_PREWRITE;
534 bus_dmamap_sync(adv->buffer_dmat, cinfo->dmamap, op);
536 scsiq.q1.data_addr = 0;
537 scsiq.q1.data_cnt = 0;
538 scsiq.sg_head = NULL;
542 * Last time we need to check if this SCB needs to
545 if (ccb_h->status != CAM_REQ_INPROG) {
547 bus_dmamap_unload(adv->buffer_dmat, cinfo->dmamap);
548 adv_clear_state(adv, (union ccb *)csio);
549 adv_free_ccb_info(adv, cinfo);
550 xpt_done((union ccb *)csio);
554 if (adv_execute_scsi_queue(adv, &scsiq, csio->dxfer_len) != 0) {
555 /* Temporary resource shortage */
556 adv_set_state(adv, ADV_RESOURCE_SHORTAGE);
558 bus_dmamap_unload(adv->buffer_dmat, cinfo->dmamap);
559 csio->ccb_h.status = CAM_REQUEUE_REQ;
560 adv_clear_state(adv, (union ccb *)csio);
561 adv_free_ccb_info(adv, cinfo);
562 xpt_done((union ccb *)csio);
565 cinfo->state |= ACCB_ACTIVE;
566 ccb_h->status |= CAM_SIM_QUEUED;
567 LIST_INSERT_HEAD(&adv->pending_ccbs, ccb_h, sim_links.le);
568 /* Schedule our timeout */
569 callout_reset_sbt(&cinfo->timer, SBT_1MS * ccb_h->timeout, 0,
570 adv_timeout, csio, 0);
573 static struct adv_ccb_info *
574 adv_alloc_ccb_info(struct adv_softc *adv)
577 struct adv_ccb_info *cinfo;
579 cinfo = &adv->ccb_infos[adv->ccb_infos_allocated];
580 cinfo->state = ACCB_FREE;
581 callout_init_mtx(&cinfo->timer, &adv->lock, 0);
582 error = bus_dmamap_create(adv->buffer_dmat, /*flags*/0,
585 device_printf(adv->dev, "Unable to allocate CCB info "
586 "dmamap - error %d\n", error);
589 adv->ccb_infos_allocated++;
594 adv_destroy_ccb_info(struct adv_softc *adv, struct adv_ccb_info *cinfo)
597 callout_drain(&cinfo->timer);
598 bus_dmamap_destroy(adv->buffer_dmat, cinfo->dmamap);
602 adv_timeout(void *arg)
605 struct adv_softc *adv;
606 struct adv_ccb_info *cinfo, *cinfo2;
608 ccb = (union ccb *)arg;
609 adv = (struct adv_softc *)xpt_path_sim(ccb->ccb_h.path)->softc;
610 cinfo = (struct adv_ccb_info *)ccb->ccb_h.ccb_cinfo_ptr;
611 mtx_assert(&adv->lock, MA_OWNED);
613 xpt_print_path(ccb->ccb_h.path);
614 printf("Timed out\n");
616 /* Have we been taken care of already?? */
617 if (cinfo == NULL || cinfo->state == ACCB_FREE) {
621 adv_stop_execution(adv);
623 if ((cinfo->state & ACCB_ABORT_QUEUED) == 0) {
624 struct ccb_hdr *ccb_h;
627 * In order to simplify the recovery process, we ask the XPT
628 * layer to halt the queue of new transactions and we traverse
629 * the list of pending CCBs and remove their timeouts. This
630 * means that the driver attempts to clear only one error
631 * condition at a time. In general, timeouts that occur
632 * close together are related anyway, so there is no benefit
633 * in attempting to handle errors in parallel. Timeouts will
634 * be reinstated when the recovery process ends.
636 adv_set_state(adv, ADV_IN_TIMEOUT);
638 /* This CCB is the CCB representing our recovery actions */
639 cinfo->state |= ACCB_RECOVERY_CCB|ACCB_ABORT_QUEUED;
641 ccb_h = LIST_FIRST(&adv->pending_ccbs);
642 while (ccb_h != NULL) {
643 cinfo2 = ccb_h->ccb_cinfo_ptr;
644 callout_stop(&cinfo2->timer);
645 ccb_h = LIST_NEXT(ccb_h, sim_links.le);
648 /* XXX Should send a BDR */
649 /* Attempt an abort as our first tact */
650 xpt_print_path(ccb->ccb_h.path);
651 printf("Attempting abort\n");
652 adv_abort_ccb(adv, ccb->ccb_h.target_id,
653 ccb->ccb_h.target_lun, ccb,
654 CAM_CMD_TIMEOUT, /*queued_only*/FALSE);
655 callout_reset(&cinfo->timer, 2 * hz, adv_timeout, ccb);
657 /* Our attempt to perform an abort failed, go for a reset */
658 xpt_print_path(ccb->ccb_h.path);
659 printf("Resetting bus\n");
660 ccb->ccb_h.status &= ~CAM_STATUS_MASK;
661 ccb->ccb_h.status |= CAM_CMD_TIMEOUT;
662 adv_reset_bus(adv, /*initiate_reset*/TRUE);
664 adv_start_execution(adv);
668 adv_alloc(device_t dev, struct resource *res, long offset)
670 struct adv_softc *adv = device_get_softc(dev);
673 * Allocate a storage area for us
675 LIST_INIT(&adv->pending_ccbs);
676 SLIST_INIT(&adv->free_ccb_infos);
679 adv->reg_off = offset;
680 mtx_init(&adv->lock, "adv", NULL, MTX_DEF);
686 adv_free(struct adv_softc *adv)
688 switch (adv->init_level) {
691 struct adv_ccb_info *cinfo;
693 while ((cinfo = SLIST_FIRST(&adv->free_ccb_infos)) != NULL) {
694 SLIST_REMOVE_HEAD(&adv->free_ccb_infos, links);
695 adv_destroy_ccb_info(adv, cinfo);
698 bus_dmamap_unload(adv->sense_dmat, adv->sense_dmamap);
701 bus_dmamem_free(adv->sense_dmat, adv->sense_buffers,
704 bus_dma_tag_destroy(adv->sense_dmat);
706 bus_dma_tag_destroy(adv->buffer_dmat);
708 bus_dma_tag_destroy(adv->parent_dmat);
710 if (adv->ccb_infos != NULL)
711 free(adv->ccb_infos, M_DEVBUF);
713 mtx_destroy(&adv->lock);
719 adv_init(struct adv_softc *adv)
721 struct adv_eeprom_config eeprom_config;
724 u_int16_t config_lsw;
725 u_int16_t config_msw;
727 mtx_lock(&adv->lock);
731 * Stop script execution.
733 adv_write_lram_16(adv, ADV_HALTCODE_W, 0x00FE);
734 adv_stop_execution(adv);
735 if (adv_stop_chip(adv) == 0 || adv_is_chip_halted(adv) == 0) {
736 mtx_unlock(&adv->lock);
737 device_printf(adv->dev,
738 "Unable to halt adapter. Initialization failed\n");
741 ADV_OUTW(adv, ADV_REG_PROG_COUNTER, ADV_MCODE_START_ADDR);
742 if (ADV_INW(adv, ADV_REG_PROG_COUNTER) != ADV_MCODE_START_ADDR) {
743 mtx_unlock(&adv->lock);
744 device_printf(adv->dev,
745 "Unable to set program counter. Initialization failed\n");
749 config_msw = ADV_INW(adv, ADV_CONFIG_MSW);
750 config_lsw = ADV_INW(adv, ADV_CONFIG_LSW);
752 if ((config_msw & ADV_CFG_MSW_CLR_MASK) != 0) {
753 config_msw &= ~ADV_CFG_MSW_CLR_MASK;
755 * XXX The Linux code flags this as an error,
756 * but what should we report to the user???
757 * It seems that clearing the config register
758 * makes this error recoverable.
760 ADV_OUTW(adv, ADV_CONFIG_MSW, config_msw);
763 /* Suck in the configuration from the EEProm */
764 checksum = adv_get_eeprom_config(adv, &eeprom_config);
766 if (ADV_INW(adv, ADV_CHIP_STATUS) & ADV_CSW_AUTO_CONFIG) {
768 * XXX The Linux code sets a warning level for this
769 * condition, yet nothing of meaning is printed to
770 * the user. What does this mean???
772 if (adv->chip_version == 3) {
773 if (eeprom_config.cfg_lsw != config_lsw)
774 eeprom_config.cfg_lsw = config_lsw;
775 if (eeprom_config.cfg_msw != config_msw) {
776 eeprom_config.cfg_msw = config_msw;
780 if (checksum == eeprom_config.chksum) {
782 /* Range/Sanity checking */
783 if (eeprom_config.max_total_qng < ADV_MIN_TOTAL_QNG) {
784 eeprom_config.max_total_qng = ADV_MIN_TOTAL_QNG;
786 if (eeprom_config.max_total_qng > ADV_MAX_TOTAL_QNG) {
787 eeprom_config.max_total_qng = ADV_MAX_TOTAL_QNG;
789 if (eeprom_config.max_tag_qng > eeprom_config.max_total_qng) {
790 eeprom_config.max_tag_qng = eeprom_config.max_total_qng;
792 if (eeprom_config.max_tag_qng < ADV_MIN_TAG_Q_PER_DVC) {
793 eeprom_config.max_tag_qng = ADV_MIN_TAG_Q_PER_DVC;
795 adv->max_openings = eeprom_config.max_total_qng;
796 adv->user_disc_enable = eeprom_config.disc_enable;
797 adv->user_cmd_qng_enabled = eeprom_config.use_cmd_qng;
798 adv->isa_dma_speed = EEPROM_DMA_SPEED(eeprom_config);
799 adv->scsi_id = EEPROM_SCSIID(eeprom_config) & ADV_MAX_TID;
800 EEPROM_SET_SCSIID(eeprom_config, adv->scsi_id);
801 adv->control = eeprom_config.cntl;
802 for (i = 0; i <= ADV_MAX_TID; i++) {
805 if ((eeprom_config.init_sdtr & (0x1 << i)) == 0)
808 sync_data = eeprom_config.sdtr_data[i];
809 adv_sdtr_to_period_offset(adv,
811 &adv->tinfo[i].user.period,
812 &adv->tinfo[i].user.offset,
815 config_lsw = eeprom_config.cfg_lsw;
816 eeprom_config.cfg_msw = config_msw;
820 device_printf(adv->dev, "Warning EEPROM Checksum mismatch. "
821 "Using default device parameters\n");
823 /* Set reasonable defaults since we can't read the EEPROM */
824 adv->isa_dma_speed = /*ADV_DEF_ISA_DMA_SPEED*/1;
825 adv->max_openings = ADV_DEF_MAX_TOTAL_QNG;
826 adv->disc_enable = TARGET_BIT_VECTOR_SET;
827 adv->user_disc_enable = TARGET_BIT_VECTOR_SET;
828 adv->cmd_qng_enabled = TARGET_BIT_VECTOR_SET;
829 adv->user_cmd_qng_enabled = TARGET_BIT_VECTOR_SET;
831 adv->control = 0xFFFF;
833 if (adv->chip_version == ADV_CHIP_VER_PCI_ULTRA_3050)
834 /* Default to no Ultra to support the 3030 */
835 adv->control &= ~ADV_CNTL_SDTR_ENABLE_ULTRA;
836 sync_data = ADV_DEF_SDTR_OFFSET | (ADV_DEF_SDTR_INDEX << 4);
837 for (i = 0; i <= ADV_MAX_TID; i++) {
838 adv_sdtr_to_period_offset(adv, sync_data,
839 &adv->tinfo[i].user.period,
840 &adv->tinfo[i].user.offset,
843 config_lsw |= ADV_CFG_LSW_SCSI_PARITY_ON;
845 config_msw &= ~ADV_CFG_MSW_CLR_MASK;
846 config_lsw |= ADV_CFG_LSW_HOST_INT_ON;
847 if ((adv->type & (ADV_PCI|ADV_ULTRA)) == (ADV_PCI|ADV_ULTRA)
848 && (adv->control & ADV_CNTL_SDTR_ENABLE_ULTRA) == 0)
854 for (i = 0; i <= ADV_MAX_TID; i++) {
855 if (adv->tinfo[i].user.period < max_sync)
856 adv->tinfo[i].user.period = max_sync;
859 if (adv_test_external_lram(adv) == 0) {
860 if ((adv->type & (ADV_PCI|ADV_ULTRA)) == (ADV_PCI|ADV_ULTRA)) {
861 eeprom_config.max_total_qng =
862 ADV_MAX_PCI_ULTRA_INRAM_TOTAL_QNG;
863 eeprom_config.max_tag_qng =
864 ADV_MAX_PCI_ULTRA_INRAM_TAG_QNG;
866 eeprom_config.cfg_msw |= 0x0800;
867 config_msw |= 0x0800;
868 eeprom_config.max_total_qng =
869 ADV_MAX_PCI_INRAM_TOTAL_QNG;
870 eeprom_config.max_tag_qng = ADV_MAX_INRAM_TAG_QNG;
872 adv->max_openings = eeprom_config.max_total_qng;
874 ADV_OUTW(adv, ADV_CONFIG_MSW, config_msw);
875 ADV_OUTW(adv, ADV_CONFIG_LSW, config_lsw);
878 * Don't write the eeprom data back for now.
879 * I'd rather not mess up the user's card. We also don't
880 * fully sanitize the eeprom settings above for the write-back
881 * to be 100% correct.
883 if (adv_set_eeprom_config(adv, &eeprom_config) != 0)
884 device_printf(adv->dev,
885 "WARNING! Failure writing to EEPROM.\n");
888 adv_set_chip_scsiid(adv, adv->scsi_id);
889 if (adv_init_lram_and_mcode(adv)) {
890 mtx_unlock(&adv->lock);
894 adv->disc_enable = adv->user_disc_enable;
896 adv_write_lram_8(adv, ADVV_DISC_ENABLE_B, adv->disc_enable);
897 for (i = 0; i <= ADV_MAX_TID; i++) {
899 * Start off in async mode.
901 adv_set_syncrate(adv, /*struct cam_path */NULL,
902 i, /*period*/0, /*offset*/0,
905 * Enable the use of tagged commands on all targets.
906 * This allows the kernel driver to make up it's own mind
907 * as it sees fit to tag queue instead of having the
908 * firmware try and second guess the tag_code settins.
910 adv_write_lram_8(adv, ADVV_MAX_DVC_QNG_BEG + i,
913 adv_write_lram_8(adv, ADVV_USE_TAGGED_QNG_B, TARGET_BIT_VECTOR_SET);
914 adv_write_lram_8(adv, ADVV_CAN_TAGGED_QNG_B, TARGET_BIT_VECTOR_SET);
915 device_printf(adv->dev,
916 "AdvanSys %s Host Adapter, SCSI ID %d, queue depth %d\n",
917 (adv->type & ADV_ULTRA) && (max_sync == 0)
918 ? "Ultra SCSI" : "SCSI",
919 adv->scsi_id, adv->max_openings);
920 mtx_unlock(&adv->lock);
927 struct adv_softc *adv;
930 mtx_lock(&adv->lock);
931 adv_intr_locked(adv);
932 mtx_unlock(&adv->lock);
936 adv_intr_locked(struct adv_softc *adv)
939 u_int16_t saved_ram_addr;
941 u_int8_t saved_ctrl_reg;
945 mtx_assert(&adv->lock, MA_OWNED);
946 chipstat = ADV_INW(adv, ADV_CHIP_STATUS);
949 if ((chipstat & (ADV_CSW_INT_PENDING|ADV_CSW_SCSI_RESET_LATCH)) == 0)
952 ctrl_reg = ADV_INB(adv, ADV_CHIP_CTRL);
953 saved_ctrl_reg = ctrl_reg & (~(ADV_CC_SCSI_RESET | ADV_CC_CHIP_RESET |
954 ADV_CC_SINGLE_STEP | ADV_CC_DIAG |
957 if ((chipstat & (ADV_CSW_SCSI_RESET_LATCH|ADV_CSW_SCSI_RESET_ACTIVE))) {
958 device_printf(adv->dev, "Detected Bus Reset\n");
959 adv_reset_bus(adv, /*initiate_reset*/FALSE);
963 if ((chipstat & ADV_CSW_INT_PENDING) != 0) {
965 saved_ram_addr = ADV_INW(adv, ADV_LRAM_ADDR);
966 host_flag = adv_read_lram_8(adv, ADVV_HOST_FLAG_B);
967 adv_write_lram_8(adv, ADVV_HOST_FLAG_B,
968 host_flag | ADV_HOST_FLAG_IN_ISR);
970 adv_ack_interrupt(adv);
972 if ((chipstat & ADV_CSW_HALTED) != 0
973 && (ctrl_reg & ADV_CC_SINGLE_STEP) != 0) {
974 adv_isr_chip_halted(adv);
975 saved_ctrl_reg &= ~ADV_CC_HALT;
979 ADV_OUTW(adv, ADV_LRAM_ADDR, saved_ram_addr);
981 if (ADV_INW(adv, ADV_LRAM_ADDR) != saved_ram_addr)
982 panic("adv_intr: Unable to set LRAM addr");
984 adv_write_lram_8(adv, ADVV_HOST_FLAG_B, host_flag);
987 ADV_OUTB(adv, ADV_CHIP_CTRL, saved_ctrl_reg);
991 adv_run_doneq(struct adv_softc *adv)
993 struct adv_q_done_info scsiq;
997 doneq_head = adv_read_lram_16(adv, ADVV_DONE_Q_TAIL_W) & 0xFF;
998 done_qno = adv_read_lram_8(adv, ADV_QNO_TO_QADDR(doneq_head)
1000 while (done_qno != ADV_QLINK_END) {
1002 struct adv_ccb_info *cinfo;
1006 done_qaddr = ADV_QNO_TO_QADDR(done_qno);
1008 /* Pull status from this request */
1009 sg_queue_cnt = adv_copy_lram_doneq(adv, done_qaddr, &scsiq,
1010 adv->max_dma_count);
1012 /* Mark it as free */
1013 adv_write_lram_8(adv, done_qaddr + ADV_SCSIQ_B_STATUS,
1014 scsiq.q_status & ~(QS_READY|QS_ABORTED));
1016 /* Process request based on retrieved info */
1017 if ((scsiq.cntl & QC_SG_HEAD) != 0) {
1021 * S/G based request. Free all of the queue
1022 * structures that contained S/G information.
1024 for (i = 0; i < sg_queue_cnt; i++) {
1025 done_qno = adv_read_lram_8(adv, done_qaddr
1029 if (done_qno == ADV_QLINK_END) {
1030 panic("adv_qdone: Corrupted SG "
1031 "list encountered");
1034 done_qaddr = ADV_QNO_TO_QADDR(done_qno);
1036 /* Mark SG queue as free */
1037 adv_write_lram_8(adv, done_qaddr
1038 + ADV_SCSIQ_B_STATUS, QS_FREE);
1043 if (adv->cur_active < (sg_queue_cnt + 1))
1044 panic("adv_qdone: Attempting to free more "
1045 "queues than are active");
1047 adv->cur_active -= sg_queue_cnt + 1;
1049 if ((scsiq.q_status != QS_DONE)
1050 && (scsiq.q_status & QS_ABORTED) == 0)
1051 panic("adv_qdone: completed scsiq with unknown status");
1053 scsiq.remain_bytes += scsiq.extra_bytes;
1055 if ((scsiq.d3.done_stat == QD_WITH_ERROR) &&
1056 (scsiq.d3.host_stat == QHSTA_M_DATA_OVER_RUN)) {
1057 if ((scsiq.cntl & (QC_DATA_IN|QC_DATA_OUT)) == 0) {
1058 scsiq.d3.done_stat = QD_NO_ERROR;
1059 scsiq.d3.host_stat = QHSTA_NO_ERROR;
1063 cinfo = &adv->ccb_infos[scsiq.d2.ccb_index];
1065 ccb->csio.resid = scsiq.remain_bytes;
1067 scsiq.d3.done_stat, scsiq.d3.host_stat,
1068 scsiq.d3.scsi_stat, scsiq.q_no);
1070 doneq_head = done_qno;
1071 done_qno = adv_read_lram_8(adv, done_qaddr + ADV_SCSIQ_B_FWD);
1073 adv_write_lram_16(adv, ADVV_DONE_Q_TAIL_W, doneq_head);
1078 adv_done(struct adv_softc *adv, union ccb *ccb, u_int done_stat,
1079 u_int host_stat, u_int scsi_status, u_int q_no)
1081 struct adv_ccb_info *cinfo;
1084 mtx_assert(&adv->lock, MA_OWNED);
1085 cinfo = (struct adv_ccb_info *)ccb->ccb_h.ccb_cinfo_ptr;
1086 LIST_REMOVE(&ccb->ccb_h, sim_links.le);
1087 callout_stop(&cinfo->timer);
1088 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
1089 bus_dmasync_op_t op;
1091 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN)
1092 op = BUS_DMASYNC_POSTREAD;
1094 op = BUS_DMASYNC_POSTWRITE;
1095 bus_dmamap_sync(adv->buffer_dmat, cinfo->dmamap, op);
1096 bus_dmamap_unload(adv->buffer_dmat, cinfo->dmamap);
1099 switch (done_stat) {
1101 if (host_stat == QHSTA_NO_ERROR) {
1102 ccb->ccb_h.status = CAM_REQ_CMP;
1105 xpt_print_path(ccb->ccb_h.path);
1106 printf("adv_done - queue done without error, "
1107 "but host status non-zero(%x)\n", host_stat);
1110 switch (host_stat) {
1111 case QHSTA_M_TARGET_STATUS_BUSY:
1112 case QHSTA_M_BAD_QUEUE_FULL_OR_BUSY:
1114 * Assume that if we were a tagged transaction
1115 * the target reported queue full. Otherwise,
1116 * report busy. The firmware really should just
1117 * pass the original status back up to us even
1118 * if it thinks the target was in error for
1119 * returning this status as no other transactions
1120 * from this initiator are in effect, but this
1121 * ignores multi-initiator setups and there is
1122 * evidence that the firmware gets its per-device
1123 * transaction counts screwed up occasionally.
1125 ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR;
1126 if ((ccb->ccb_h.flags & CAM_TAG_ACTION_VALID) != 0
1127 && host_stat != QHSTA_M_TARGET_STATUS_BUSY)
1128 scsi_status = SCSI_STATUS_QUEUE_FULL;
1130 scsi_status = SCSI_STATUS_BUSY;
1131 adv_abort_ccb(adv, ccb->ccb_h.target_id,
1132 ccb->ccb_h.target_lun,
1133 /*ccb*/NULL, CAM_REQUEUE_REQ,
1134 /*queued_only*/TRUE);
1136 case QHSTA_M_NO_AUTO_REQ_SENSE:
1137 case QHSTA_NO_ERROR:
1138 ccb->csio.scsi_status = scsi_status;
1139 switch (scsi_status) {
1140 case SCSI_STATUS_CHECK_COND:
1141 case SCSI_STATUS_CMD_TERMINATED:
1142 ccb->ccb_h.status |= CAM_AUTOSNS_VALID;
1143 /* Structure copy */
1144 ccb->csio.sense_data =
1145 adv->sense_buffers[q_no - 1];
1147 case SCSI_STATUS_BUSY:
1148 case SCSI_STATUS_RESERV_CONFLICT:
1149 case SCSI_STATUS_QUEUE_FULL:
1150 case SCSI_STATUS_COND_MET:
1151 case SCSI_STATUS_INTERMED:
1152 case SCSI_STATUS_INTERMED_COND_MET:
1153 ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR;
1155 case SCSI_STATUS_OK:
1156 ccb->ccb_h.status |= CAM_REQ_CMP;
1160 case QHSTA_M_SEL_TIMEOUT:
1161 ccb->ccb_h.status = CAM_SEL_TIMEOUT;
1163 case QHSTA_M_DATA_OVER_RUN:
1164 ccb->ccb_h.status = CAM_DATA_RUN_ERR;
1166 case QHSTA_M_UNEXPECTED_BUS_FREE:
1167 ccb->ccb_h.status = CAM_UNEXP_BUSFREE;
1169 case QHSTA_M_BAD_BUS_PHASE_SEQ:
1170 ccb->ccb_h.status = CAM_SEQUENCE_FAIL;
1172 case QHSTA_M_BAD_CMPL_STATUS_IN:
1173 /* No command complete after a status message */
1174 ccb->ccb_h.status = CAM_SEQUENCE_FAIL;
1176 case QHSTA_D_EXE_SCSI_Q_BUSY_TIMEOUT:
1177 case QHSTA_M_WTM_TIMEOUT:
1178 case QHSTA_M_HUNG_REQ_SCSI_BUS_RESET:
1179 /* The SCSI bus hung in a phase */
1180 ccb->ccb_h.status = CAM_SEQUENCE_FAIL;
1181 adv_reset_bus(adv, /*initiate_reset*/TRUE);
1183 case QHSTA_M_AUTO_REQ_SENSE_FAIL:
1184 ccb->ccb_h.status = CAM_AUTOSENSE_FAIL;
1186 case QHSTA_D_QDONE_SG_LIST_CORRUPTED:
1187 case QHSTA_D_ASC_DVC_ERROR_CODE_SET:
1188 case QHSTA_D_HOST_ABORT_FAILED:
1189 case QHSTA_D_EXE_SCSI_Q_FAILED:
1190 case QHSTA_D_ASPI_NO_BUF_POOL:
1191 case QHSTA_M_BAD_TAG_CODE:
1192 case QHSTA_D_LRAM_CMP_ERROR:
1193 case QHSTA_M_MICRO_CODE_ERROR_HALT:
1195 panic("%s: Unhandled Host status error %x",
1196 device_get_nameunit(adv->dev), host_stat);
1201 case QD_ABORTED_BY_HOST:
1202 /* Don't clobber any, more explicit, error codes we've set */
1203 if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INPROG)
1204 ccb->ccb_h.status = CAM_REQ_ABORTED;
1208 xpt_print_path(ccb->ccb_h.path);
1209 printf("adv_done - queue done with unknown status %x:%x\n",
1210 done_stat, host_stat);
1211 ccb->ccb_h.status = CAM_REQ_CMP_ERR;
1214 adv_clear_state(adv, ccb);
1215 if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP
1216 && (ccb->ccb_h.status & CAM_DEV_QFRZN) == 0) {
1217 xpt_freeze_devq(ccb->ccb_h.path, /*count*/1);
1218 ccb->ccb_h.status |= CAM_DEV_QFRZN;
1220 adv_free_ccb_info(adv, cinfo);
1222 * Null this out so that we catch driver bugs that cause a
1223 * ccb to be completed twice.
1225 ccb->ccb_h.ccb_cinfo_ptr = NULL;
1226 ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
1231 * Function to poll for command completion when
1232 * interrupts are disabled (crash dumps)
1235 adv_poll(struct cam_sim *sim)
1238 adv_intr_locked(cam_sim_softc(sim));
1242 * Attach all the sub-devices we can find
1246 struct adv_softc *adv;
1248 struct ccb_setasync csa;
1249 struct cam_devq *devq;
1253 * Allocate an array of ccb mapping structures. We put the
1254 * index of the ccb_info structure into the queue representing
1255 * a transaction and use it for mapping the queue to the
1256 * upper level SCSI transaction it represents.
1258 adv->ccb_infos = malloc(sizeof(*adv->ccb_infos) * adv->max_openings,
1259 M_DEVBUF, M_NOWAIT);
1261 if (adv->ccb_infos == NULL)
1267 * Create our DMA tags. These tags define the kinds of device
1268 * accessible memory allocations and memory mappings we will
1269 * need to perform during normal operation.
1271 * Unless we need to further restrict the allocation, we rely
1272 * on the restrictions of the parent dmat, hence the common
1273 * use of MAXADDR and MAXSIZE.
1275 * The ASC boards use chains of "queues" (the transactional
1276 * resources on the board) to represent long S/G lists.
1277 * The first queue represents the command and holds a
1278 * single address and data pair. The queues that follow
1279 * can each hold ADV_SG_LIST_PER_Q entries. Given the
1280 * total number of queues, we can express the largest
1281 * transaction we can map. We reserve a few queues for
1282 * error recovery. Take those into account as well.
1284 * There is a way to take an interrupt to download the
1285 * next batch of S/G entries if there are more than 255
1286 * of them (the counter in the queue structure is a u_int8_t).
1287 * We don't use this feature, so limit the S/G list size
1290 max_sg = (adv->max_openings - ADV_MIN_FREE_Q - 1) * ADV_SG_LIST_PER_Q;
1294 /* DMA tag for mapping buffers into device visible space. */
1295 if (bus_dma_tag_create(
1296 /* parent */ adv->parent_dmat,
1299 /* lowaddr */ BUS_SPACE_MAXADDR,
1300 /* highaddr */ BUS_SPACE_MAXADDR,
1302 /* filterarg */ NULL,
1303 /* maxsize */ ADV_MAXPHYS,
1304 /* nsegments */ max_sg,
1305 /* maxsegsz */ BUS_SPACE_MAXSIZE_32BIT,
1306 /* flags */ BUS_DMA_ALLOCNOW,
1307 /* lockfunc */ busdma_lock_mutex,
1308 /* lockarg */ &adv->lock,
1309 &adv->buffer_dmat) != 0) {
1314 /* DMA tag for our sense buffers */
1315 if (bus_dma_tag_create(
1316 /* parent */ adv->parent_dmat,
1319 /* lowaddr */ BUS_SPACE_MAXADDR,
1320 /* highaddr */ BUS_SPACE_MAXADDR,
1322 /* filterarg */ NULL,
1323 /* maxsize */ sizeof(struct scsi_sense_data) *
1326 /* maxsegsz */ BUS_SPACE_MAXSIZE_32BIT,
1328 /* lockfunc */ busdma_lock_mutex,
1329 /* lockarg */ &adv->lock,
1330 &adv->sense_dmat) != 0) {
1336 /* Allocation for our sense buffers */
1337 if (bus_dmamem_alloc(adv->sense_dmat, (void **)&adv->sense_buffers,
1338 BUS_DMA_NOWAIT, &adv->sense_dmamap) != 0) {
1344 /* And permanently map them */
1345 bus_dmamap_load(adv->sense_dmat, adv->sense_dmamap,
1347 sizeof(struct scsi_sense_data)*adv->max_openings,
1348 adv_map, &adv->sense_physbase, /*flags*/0);
1355 if (adv_start_chip(adv) != 1) {
1356 device_printf(adv->dev,
1357 "Unable to start on board processor. Aborting.\n");
1362 * Create the device queue for our SIM.
1364 devq = cam_simq_alloc(adv->max_openings);
1369 * Construct our SIM entry.
1371 adv->sim = cam_sim_alloc(adv_action, adv_poll, "adv", adv,
1372 device_get_unit(adv->dev), &adv->lock, 1, adv->max_openings, devq);
1373 if (adv->sim == NULL)
1379 mtx_lock(&adv->lock);
1380 if (xpt_bus_register(adv->sim, adv->dev, 0) != CAM_SUCCESS) {
1381 cam_sim_free(adv->sim, /*free devq*/TRUE);
1382 mtx_unlock(&adv->lock);
1386 if (xpt_create_path(&adv->path, /*periph*/NULL, cam_sim_path(adv->sim),
1387 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD)
1389 xpt_bus_deregister(cam_sim_path(adv->sim));
1390 cam_sim_free(adv->sim, /*free devq*/TRUE);
1391 mtx_unlock(&adv->lock);
1395 xpt_setup_ccb(&csa.ccb_h, adv->path, /*priority*/5);
1396 csa.ccb_h.func_code = XPT_SASYNC_CB;
1397 csa.event_enable = AC_FOUND_DEVICE|AC_LOST_DEVICE;
1398 csa.callback = advasync;
1399 csa.callback_arg = adv;
1400 xpt_action((union ccb *)&csa);
1401 mtx_unlock(&adv->lock);
1402 gone_in_dev(adv->dev, 12, "adv(4) driver");
1406 MODULE_DEPEND(adv, cam, 1, 1, 1);