2 * CAM SCSI device driver for the Adaptec 174X SCSI Host adapter
4 * Copyright (c) 1998 Justin T. Gibbs
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice immediately at the beginning of the file, without modification,
12 * this list of conditions, and the following disclaimer.
13 * 2. The name of the author may not be used to endorse or promote products
14 * derived from this software without specific prior written permission.
16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
20 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31 #include <sys/param.h>
32 #include <sys/systm.h>
33 #include <sys/kernel.h>
34 #include <sys/malloc.h>
35 #include <sys/module.h>
37 #include <sys/mutex.h>
40 #include <machine/bus.h>
41 #include <machine/resource.h>
45 #include <cam/cam_ccb.h>
46 #include <cam/cam_sim.h>
47 #include <cam/cam_xpt_sim.h>
48 #include <cam/cam_debug.h>
50 #include <cam/scsi/scsi_message.h>
52 #include <dev/eisa/eisaconf.h>
54 #include <dev/ahb/ahbreg.h>
56 #define ccb_ecb_ptr spriv_ptr0
57 #define ccb_ahb_ptr spriv_ptr1
59 #define ahb_inb(ahb, port) \
60 bus_space_read_1((ahb)->tag, (ahb)->bsh, port)
62 #define ahb_inl(ahb, port) \
63 bus_space_read_4((ahb)->tag, (ahb)->bsh, port)
65 #define ahb_outb(ahb, port, value) \
66 bus_space_write_1((ahb)->tag, (ahb)->bsh, port, value)
68 #define ahb_outl(ahb, port, value) \
69 bus_space_write_4((ahb)->tag, (ahb)->bsh, port, value)
71 static const char *ahbmatch(eisa_id_t type);
72 static struct ahb_softc *ahballoc(u_long unit, struct resource *res);
73 static void ahbfree(struct ahb_softc *ahb);
74 static int ahbreset(struct ahb_softc *ahb);
75 static void ahbmapecbs(void *arg, bus_dma_segment_t *segs,
77 static int ahbxptattach(struct ahb_softc *ahb);
78 static void ahbhandleimmed(struct ahb_softc *ahb,
79 u_int32_t mbox, u_int intstat);
80 static void ahbcalcresid(struct ahb_softc *ahb,
81 struct ecb *ecb, union ccb *ccb);
82 static __inline void ahbdone(struct ahb_softc *ahb, u_int32_t mbox,
84 static void ahbintr(void *arg);
85 static bus_dmamap_callback_t ahbexecuteecb;
86 static void ahbaction(struct cam_sim *sim, union ccb *ccb);
87 static void ahbpoll(struct cam_sim *sim);
89 /* Our timeout handler */
90 static timeout_t ahbtimeout;
92 static __inline struct ecb* ahbecbget(struct ahb_softc *ahb);
93 static __inline void ahbecbfree(struct ahb_softc* ahb,
95 static __inline u_int32_t ahbecbvtop(struct ahb_softc *ahb,
97 static __inline struct ecb* ahbecbptov(struct ahb_softc *ahb,
99 static __inline u_int32_t ahbstatuspaddr(u_int32_t ecb_paddr);
100 static __inline u_int32_t ahbsensepaddr(u_int32_t ecb_paddr);
101 static __inline u_int32_t ahbsgpaddr(u_int32_t ecb_paddr);
102 static __inline void ahbqueuembox(struct ahb_softc *ahb,
106 static __inline struct ecb*
107 ahbecbget(struct ahb_softc *ahb)
113 if ((ecb = SLIST_FIRST(&ahb->free_ecbs)) != NULL)
114 SLIST_REMOVE_HEAD(&ahb->free_ecbs, links);
121 ahbecbfree(struct ahb_softc* ahb, struct ecb* ecb)
126 ecb->state = ECB_FREE;
127 SLIST_INSERT_HEAD(&ahb->free_ecbs, ecb, links);
131 static __inline u_int32_t
132 ahbecbvtop(struct ahb_softc *ahb, struct ecb *ecb)
134 return (ahb->ecb_physbase
135 + (u_int32_t)((caddr_t)ecb - (caddr_t)ahb->ecb_array));
138 static __inline struct ecb*
139 ahbecbptov(struct ahb_softc *ahb, u_int32_t ecb_addr)
141 return (ahb->ecb_array
142 + ((struct ecb*)(uintptr_t)ecb_addr
143 - (struct ecb*)(uintptr_t)ahb->ecb_physbase));
146 static __inline u_int32_t
147 ahbstatuspaddr(u_int32_t ecb_paddr)
149 return (ecb_paddr + offsetof(struct ecb, status));
152 static __inline u_int32_t
153 ahbsensepaddr(u_int32_t ecb_paddr)
155 return (ecb_paddr + offsetof(struct ecb, sense));
158 static __inline u_int32_t
159 ahbsgpaddr(u_int32_t ecb_paddr)
161 return (ecb_paddr + offsetof(struct ecb, sg_list));
165 ahbqueuembox(struct ahb_softc *ahb, u_int32_t mboxval, u_int attn_code)
171 status = ahb_inb(ahb, HOSTSTAT);
172 if ((status & (HOSTSTAT_MBOX_EMPTY|HOSTSTAT_BUSY))
173 == HOSTSTAT_MBOX_EMPTY)
178 panic("ahb%ld: adapter not taking commands\n", ahb->unit);
180 ahb_outl(ahb, MBOXOUT0, mboxval);
181 ahb_outb(ahb, ATTN, attn_code);
185 ahbmatch(eisa_id_t type)
187 switch(type & 0xfffffe00) {
188 case EISA_DEVICE_ID_ADAPTEC_1740:
189 return ("Adaptec 174x SCSI host adapter");
198 ahbprobe(device_t dev)
206 desc = ahbmatch(eisa_get_id(dev));
209 device_set_desc(dev, desc);
211 iobase = (eisa_get_slot(dev) * EISA_SLOT_SIZE) +
212 AHB_EISA_SLOT_OFFSET;
214 eisa_add_iospace(dev, iobase, AHB_EISA_IOSIZE, RESVADDR_NONE);
216 intdef = inb(INTDEF + iobase);
217 switch (intdef & 0x7) {
237 printf("Adaptec 174X at slot %d: illegal "
238 "irq setting %d\n", eisa_get_slot(dev),
246 shared = (inb(INTDEF + iobase) & INTLEVEL) ?
247 EISA_TRIGGER_LEVEL : EISA_TRIGGER_EDGE;
249 eisa_add_intr(dev, irq, shared);
255 ahbattach(device_t dev)
258 * find unit and check we have that many defined
260 struct ahb_softc *ahb;
261 struct ecb* next_ecb;
262 struct resource *io = 0;
263 struct resource *irq = 0;
268 io = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &rid, RF_ACTIVE);
270 device_printf(dev, "No I/O space?!\n");
274 if ((ahb = ahballoc(device_get_unit(dev), io)) == NULL) {
278 if (ahbreset(ahb) != 0)
282 irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE);
284 device_printf(dev, "Can't allocate interrupt\n");
289 * Create our DMA tags. These tags define the kinds of device
290 * accessible memory allocations and memory mappings we will
291 * need to perform during normal operation.
293 /* DMA tag for mapping buffers into device visible space. */
294 /* XXX Should be a child of the EISA bus dma tag */
295 if (bus_dma_tag_create( /* parent */ NULL,
298 /* lowaddr */ BUS_SPACE_MAXADDR_32BIT,
299 /* highaddr */ BUS_SPACE_MAXADDR,
301 /* filterarg */ NULL,
302 /* maxsize */ MAXBSIZE,
303 /* nsegments */ AHB_NSEG,
304 /* maxsegsz */ BUS_SPACE_MAXSIZE_32BIT,
305 /* flags */ BUS_DMA_ALLOCNOW,
306 /* lockfunc */ busdma_lock_mutex,
307 /* lockarg */ &Giant,
308 &ahb->buffer_dmat) != 0)
313 /* DMA tag for our ccb structures and ha inquiry data */
314 if (bus_dma_tag_create( /* parent */ NULL,
317 /* lowaddr */ BUS_SPACE_MAXADDR_32BIT,
318 /* highaddr */ BUS_SPACE_MAXADDR,
320 /* filterarg */ NULL,
321 /* maxsize */ (AHB_NECB *
323 + sizeof(*ahb->ha_inq_data),
325 /* maxsegsz */ BUS_SPACE_MAXSIZE_32BIT,
327 /* lockfunc */ busdma_lock_mutex,
328 /* lockarg */ &Giant,
329 &ahb->ecb_dmat) != 0)
334 /* Allocation for our ccbs */
335 if (bus_dmamem_alloc(ahb->ecb_dmat, (void **)&ahb->ecb_array,
336 BUS_DMA_NOWAIT, &ahb->ecb_dmamap) != 0)
339 ahb->ha_inq_data = (struct ha_inquiry_data *)&ahb->ecb_array[AHB_NECB];
343 /* And permanently map them */
344 bus_dmamap_load(ahb->ecb_dmat, ahb->ecb_dmamap,
345 ahb->ecb_array, AHB_NSEG * sizeof(struct ecb),
346 ahbmapecbs, ahb, /*flags*/0);
350 /* Allocate the buffer dmamaps for each of our ECBs */
351 bzero(ahb->ecb_array, (AHB_NECB * sizeof(struct ecb))
352 + sizeof(*ahb->ha_inq_data));
353 next_ecb = ahb->ecb_array;
354 while (ahb->num_ecbs < AHB_NECB) {
357 if (bus_dmamap_create(ahb->buffer_dmat, /*flags*/0,
360 ecb_paddr = ahbecbvtop(ahb, next_ecb);
361 next_ecb->hecb.status_ptr = ahbstatuspaddr(ecb_paddr);
362 next_ecb->hecb.sense_ptr = ahbsensepaddr(ecb_paddr);
364 ahbecbfree(ahb, next_ecb);
368 if (ahb->num_ecbs == 0)
374 * Now that we know we own the resources we need, register
375 * our bus with the XPT.
377 if (ahbxptattach(ahb))
380 /* Enable our interrupt */
381 bus_setup_intr(dev, irq, INTR_TYPE_CAM|INTR_ENTROPY, ahbintr, ahb, &ih);
386 * The board's IRQ line will not be left enabled
387 * if we can't intialize correctly, so its safe
388 * to release the irq.
393 bus_release_resource(dev, SYS_RES_IOPORT, 0, io);
395 bus_release_resource(dev, SYS_RES_IRQ, 0, irq);
399 static struct ahb_softc *
400 ahballoc(u_long unit, struct resource *res)
402 struct ahb_softc *ahb;
405 * Allocate a storage area for us
407 ahb = malloc(sizeof(struct ahb_softc), M_DEVBUF, M_NOWAIT | M_ZERO);
409 printf("ahb%ld: cannot malloc!\n", unit);
412 SLIST_INIT(&ahb->free_ecbs);
413 LIST_INIT(&ahb->pending_ccbs);
415 ahb->tag = rman_get_bustag(res);
416 ahb->bsh = rman_get_bushandle(res);
417 ahb->disc_permitted = ~0;
418 ahb->tags_permitted = ~0;
424 ahbfree(struct ahb_softc *ahb)
426 switch (ahb->init_level) {
429 bus_dmamap_unload(ahb->ecb_dmat, ahb->ecb_dmamap);
431 bus_dmamem_free(ahb->ecb_dmat, ahb->ecb_array,
433 bus_dmamap_destroy(ahb->ecb_dmat, ahb->ecb_dmamap);
435 bus_dma_tag_destroy(ahb->ecb_dmat);
437 bus_dma_tag_destroy(ahb->buffer_dmat);
445 * reset board, If it doesn't respond, return failure
448 ahbreset(struct ahb_softc *ahb)
450 int wait = 1000; /* 1 sec enough? */
453 if ((ahb_inb(ahb, PORTADDR) & PORTADDR_ENHANCED) == 0) {
454 printf("ahb_reset: Controller not in enhanced mode\n");
458 ahb_outb(ahb, CONTROL, CNTRL_HARD_RST);
460 ahb_outb(ahb, CONTROL, 0);
463 if ((ahb_inb(ahb, HOSTSTAT) & HOSTSTAT_BUSY) == 0)
468 printf("ahbreset: No answer from aha1742 board\n");
471 if ((test = ahb_inb(ahb, MBOXIN0)) != 0) {
472 printf("ahb_reset: self test failed, val = 0x%x\n", test);
475 while (ahb_inb(ahb, HOSTSTAT) & HOSTSTAT_INTPEND) {
476 ahb_outb(ahb, CONTROL, CNTRL_CLRINT);
483 ahbmapecbs(void *arg, bus_dma_segment_t *segs, int nseg, int error)
485 struct ahb_softc* ahb;
487 ahb = (struct ahb_softc*)arg;
488 ahb->ecb_physbase = segs->ds_addr;
490 * Space for adapter inquiry information is on the
491 * tail of the ecb array.
493 ahb->ha_inq_physbase = ahbecbvtop(ahb, &ahb->ecb_array[AHB_NECB]);
497 ahbxptattach(struct ahb_softc *ahb)
499 struct cam_devq *devq;
503 /* Remeber who are we on the scsi bus */
504 ahb->scsi_id = ahb_inb(ahb, SCSIDEF) & HSCSIID;
506 /* Use extended translation?? */
507 ahb->extended_trans = ahb_inb(ahb, RESV1) & EXTENDED_TRANS;
509 /* Fetch adapter inquiry data */
510 ecb = ahbecbget(ahb); /* Always succeeds - no outstanding commands */
511 ecb->hecb.opcode = ECBOP_READ_HA_INQDATA;
512 ecb->hecb.flag_word1 = FW1_SUPPRESS_URUN_ERR|FW1_ERR_STATUS_BLK_ONLY;
513 ecb->hecb.data_ptr = ahb->ha_inq_physbase;
514 ecb->hecb.data_len = sizeof(struct ha_inquiry_data);
515 ecb->hecb.sense_ptr = 0;
516 ecb->state = ECB_ACTIVE;
518 /* Tell the adapter about this command */
519 ahbqueuembox(ahb, ahbecbvtop(ahb, ecb),
520 ATTN_STARTECB|ahb->scsi_id);
522 /* Poll for interrupt completion */
523 for (i = 1000; ecb->state != ECB_FREE && i != 0; i--) {
528 ahb->num_ecbs = MIN(ahb->num_ecbs,
529 ahb->ha_inq_data->scsi_data.spc2_flags);
530 printf("ahb%ld: %.8s %s SCSI Adapter, FW Rev. %.4s, ID=%d, %d ECBs\n",
531 ahb->unit, ahb->ha_inq_data->scsi_data.product,
532 (ahb->ha_inq_data->scsi_data.flags & 0x4) ? "Differential"
534 ahb->ha_inq_data->scsi_data.revision,
535 ahb->scsi_id, ahb->num_ecbs);
537 /* Restore sense paddr for future CCB clients */
538 ecb->hecb.sense_ptr = ahbsensepaddr(ahbecbvtop(ahb, ecb));
540 ahbecbfree(ahb, ecb);
543 * Create the device queue for our SIM.
545 devq = cam_simq_alloc(ahb->num_ecbs);
550 * Construct our SIM entry
552 ahb->sim = cam_sim_alloc(ahbaction, ahbpoll, "ahb", ahb, ahb->unit,
553 2, ahb->num_ecbs, devq);
554 if (ahb->sim == NULL) {
559 if (xpt_bus_register(ahb->sim, 0) != CAM_SUCCESS) {
560 cam_sim_free(ahb->sim, /*free_devq*/TRUE);
564 if (xpt_create_path(&ahb->path, /*periph*/NULL,
565 cam_sim_path(ahb->sim), CAM_TARGET_WILDCARD,
566 CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
567 xpt_bus_deregister(cam_sim_path(ahb->sim));
568 cam_sim_free(ahb->sim, /*free_devq*/TRUE);
573 * Allow the board to generate interrupts.
575 ahb_outb(ahb, INTDEF, ahb_inb(ahb, INTDEF) | INTEN);
581 ahbhandleimmed(struct ahb_softc *ahb, u_int32_t mbox, u_int intstat)
583 struct ccb_hdr *ccb_h;
586 if (ahb->immed_cmd == 0) {
587 printf("ahb%ld: Immediate Command complete with no "
588 " pending command\n", ahb->unit);
592 target_id = intstat & INTSTAT_TARGET_MASK;
594 ccb_h = LIST_FIRST(&ahb->pending_ccbs);
595 while (ccb_h != NULL) {
596 struct ecb *pending_ecb;
599 pending_ecb = (struct ecb *)ccb_h->ccb_ecb_ptr;
600 ccb = pending_ecb->ccb;
601 ccb_h = LIST_NEXT(ccb_h, sim_links.le);
602 if (ccb->ccb_h.target_id == target_id
603 || target_id == ahb->scsi_id) {
604 untimeout(ahbtimeout, pending_ecb,
605 ccb->ccb_h.timeout_ch);
606 LIST_REMOVE(&ccb->ccb_h, sim_links.le);
607 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE)
608 bus_dmamap_unload(ahb->buffer_dmat,
609 pending_ecb->dmamap);
610 if (pending_ecb == ahb->immed_ecb)
612 CAM_CMD_TIMEOUT|CAM_RELEASE_SIMQ;
613 else if (target_id == ahb->scsi_id)
614 ccb->ccb_h.status = CAM_SCSI_BUS_RESET;
616 ccb->ccb_h.status = CAM_BDR_SENT;
617 ahbecbfree(ahb, pending_ecb);
619 } else if (ahb->immed_ecb != NULL) {
620 /* Re-instate timeout */
621 ccb->ccb_h.timeout_ch =
622 timeout(ahbtimeout, (caddr_t)pending_ecb,
623 (ccb->ccb_h.timeout * hz) / 1000);
627 if (ahb->immed_ecb != NULL) {
628 ahb->immed_ecb = NULL;
629 printf("ahb%ld: No longer in timeout\n", ahb->unit);
630 } else if (target_id == ahb->scsi_id)
631 printf("ahb%ld: SCSI Bus Reset Delivered\n", ahb->unit);
633 printf("ahb%ld: Bus Device Reset Delibered to target %d\n",
634 ahb->unit, target_id);
640 ahbcalcresid(struct ahb_softc *ahb, struct ecb *ecb, union ccb *ccb)
642 if (ecb->status.data_overrun != 0) {
644 * Overrun Condition. The hardware doesn't
645 * provide a meaningful byte count in this case
646 * (the residual is always 0). Tell the XPT
647 * layer about the error.
649 ccb->ccb_h.status = CAM_DATA_RUN_ERR;
651 ccb->csio.resid = ecb->status.resid_count;
653 if ((ecb->hecb.flag_word1 & FW1_SG_ECB) != 0) {
655 * For S/G transfers, the adapter provides a pointer
656 * to the address in the last S/G element used and a
657 * residual for that element. So, we need to sum up
658 * the elements that follow it in order to get a real
659 * residual number. If we have an overrun, the residual
660 * reported will be 0 and we already know that all S/G
661 * segments have been exhausted, so we can skip this
667 num_sg = ecb->hecb.data_len / sizeof(ahb_sg_t);
669 /* Find the S/G the adapter was working on */
670 for (sg = ecb->sg_list;
671 num_sg != 0 && sg->addr != ecb->status.resid_addr;
680 for (; num_sg != 0; num_sg--, sg++)
681 ccb->csio.resid += sg->len;
683 /* Underruns are not errors */
684 ccb->ccb_h.status = CAM_REQ_CMP;
689 ahbprocesserror(struct ahb_softc *ahb, struct ecb *ecb, union ccb *ccb)
691 struct hardware_ecb *hecb;
692 struct ecb_status *status;
695 status = &ecb->status;
696 switch (status->ha_status) {
698 ccb->csio.scsi_status = status->scsi_status;
699 if (status->scsi_status != 0) {
700 ccb->ccb_h.status = CAM_SCSI_STATUS_ERROR;
701 if (status->sense_stored) {
702 ccb->ccb_h.status |= CAM_AUTOSNS_VALID;
703 ccb->csio.sense_resid =
704 ccb->csio.sense_len - status->sense_len;
705 bcopy(&ecb->sense, &ccb->csio.sense_data,
710 case HS_TARGET_NOT_ASSIGNED:
711 ccb->ccb_h.status = CAM_PATH_INVALID;
714 ccb->ccb_h.status = CAM_SEL_TIMEOUT;
716 case HS_DATA_RUN_ERR:
717 ahbcalcresid(ahb, ecb, ccb);
719 case HS_UNEXPECTED_BUSFREE:
720 ccb->ccb_h.status = CAM_UNEXP_BUSFREE;
722 case HS_INVALID_PHASE:
723 ccb->ccb_h.status = CAM_SEQUENCE_FAIL;
725 case HS_REQUEST_SENSE_FAILED:
726 ccb->ccb_h.status = CAM_AUTOSENSE_FAIL;
728 case HS_TAG_MSG_REJECTED:
730 struct ccb_trans_settings neg;
731 struct ccb_trans_settings_scsi *scsi = &neg.proto_specific.scsi;
733 xpt_print_path(ccb->ccb_h.path);
734 printf("refuses tagged commands. Performing "
736 memset(&neg, 0, sizeof (neg));
737 neg.protocol = PROTO_SCSI;
738 neg.protocol_version = SCSI_REV_2;
739 neg.transport = XPORT_SPI;
740 neg.transport_version = 2;
741 scsi->flags = CTS_SCSI_VALID_TQ;
742 xpt_setup_ccb(&neg.ccb_h, ccb->ccb_h.path, /*priority*/1);
743 xpt_async(AC_TRANSFER_NEG, ccb->ccb_h.path, &neg);
744 ahb->tags_permitted &= ~(0x01 << ccb->ccb_h.target_id);
745 ccb->ccb_h.status = CAM_MSG_REJECT_REC;
748 case HS_FIRMWARE_LOAD_REQ:
749 case HS_HARDWARE_ERR:
751 * Tell the system that the Adapter
752 * is no longer functional.
754 ccb->ccb_h.status = CAM_NO_HBA;
756 case HS_CMD_ABORTED_HOST:
757 case HS_CMD_ABORTED_ADAPTER:
758 case HS_ATN_TARGET_FAILED:
759 case HS_SCSI_RESET_ADAPTER:
760 case HS_SCSI_RESET_INCOMING:
761 ccb->ccb_h.status = CAM_SCSI_BUS_RESET;
763 case HS_INVALID_ECB_PARAM:
764 printf("ahb%ld: opcode 0x%02x, flag_word1 0x%02x, flag_word2 0x%02x\n",
765 ahb->unit, hecb->opcode, hecb->flag_word1, hecb->flag_word2);
766 ccb->ccb_h.status = CAM_SCSI_BUS_RESET;
768 case HS_DUP_TCB_RECEIVED:
769 case HS_INVALID_OPCODE:
770 case HS_INVALID_CMD_LINK:
771 case HS_PROGRAM_CKSUM_ERROR:
772 panic("ahb%ld: Can't happen host status %x occurred",
773 ahb->unit, status->ha_status);
776 if (ccb->ccb_h.status != CAM_REQ_CMP) {
777 xpt_freeze_devq(ccb->ccb_h.path, /*count*/1);
778 ccb->ccb_h.status |= CAM_DEV_QFRZN;
783 ahbdone(struct ahb_softc *ahb, u_int32_t mbox, u_int intstat)
788 ecb = ahbecbptov(ahb, mbox);
790 if ((ecb->state & ECB_ACTIVE) == 0)
791 panic("ecb not active");
796 untimeout(ahbtimeout, ecb, ccb->ccb_h.timeout_ch);
797 LIST_REMOVE(&ccb->ccb_h, sim_links.le);
799 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
802 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN)
803 op = BUS_DMASYNC_POSTREAD;
805 op = BUS_DMASYNC_POSTWRITE;
806 bus_dmamap_sync(ahb->buffer_dmat, ecb->dmamap, op);
807 bus_dmamap_unload(ahb->buffer_dmat, ecb->dmamap);
810 if ((intstat & INTSTAT_MASK) == INTSTAT_ECB_OK) {
811 ccb->ccb_h.status = CAM_REQ_CMP;
814 ahbprocesserror(ahb, ecb, ccb);
816 ahbecbfree(ahb, ecb);
819 /* Non CCB Command */
820 if ((intstat & INTSTAT_MASK) != INTSTAT_ECB_OK) {
821 printf("ahb%ld: Command 0%x Failed %x:%x:%x\n",
822 ahb->unit, ecb->hecb.opcode,
823 *((u_int16_t*)&ecb->status),
824 ecb->status.ha_status, ecb->status.resid_count);
826 /* Client owns this ECB and will release it. */
831 * Catch an interrupt from the adaptor
836 struct ahb_softc *ahb;
840 ahb = (struct ahb_softc *)arg;
842 while (ahb_inb(ahb, HOSTSTAT) & HOSTSTAT_INTPEND) {
844 * Fetch information about this interrupt.
846 intstat = ahb_inb(ahb, INTSTAT);
847 mbox = ahb_inl(ahb, MBOXIN0);
850 * Reset interrupt latch.
852 ahb_outb(ahb, CONTROL, CNTRL_CLRINT);
855 * Process the completed operation
857 switch (intstat & INTSTAT_MASK) {
859 case INTSTAT_ECB_CMPWRETRY:
860 case INTSTAT_ECB_CMPWERR:
861 ahbdone(ahb, mbox, intstat);
863 case INTSTAT_AEN_OCCURED:
864 if ((intstat & INTSTAT_TARGET_MASK) == ahb->scsi_id) {
866 xpt_print_path(ahb->path);
868 case HS_SCSI_RESET_ADAPTER:
869 printf("Host Adapter Initiated "
870 "Bus Reset occurred\n");
872 case HS_SCSI_RESET_INCOMING:
873 printf("Bus Reset Initiated "
874 "by another device occurred\n");
878 xpt_async(AC_BUS_RESET, ahb->path, NULL);
881 printf("Unsupported initiator selection AEN occured\n");
883 case INTSTAT_IMMED_OK:
884 case INTSTAT_IMMED_ERR:
885 ahbhandleimmed(ahb, mbox, intstat);
888 panic("Unrecoverable hardware Error Occurred\n");
894 ahbexecuteecb(void *arg, bus_dma_segment_t *dm_segs, int nseg, int error)
898 struct ahb_softc *ahb;
902 ecb = (struct ecb *)arg;
904 ahb = (struct ahb_softc *)ccb->ccb_h.ccb_ahb_ptr;
908 printf("ahb%ld: Unexepected error 0x%x returned from "
909 "bus_dmamap_load\n", ahb->unit, error);
910 if (ccb->ccb_h.status == CAM_REQ_INPROG) {
911 xpt_freeze_devq(ccb->ccb_h.path, /*count*/1);
912 ccb->ccb_h.status = CAM_REQ_TOO_BIG|CAM_DEV_QFRZN;
914 ahbecbfree(ahb, ecb);
919 ecb_paddr = ahbecbvtop(ahb, ecb);
923 bus_dma_segment_t *end_seg;
926 end_seg = dm_segs + nseg;
928 /* Copy the segments into our SG list */
930 while (dm_segs < end_seg) {
931 sg->addr = dm_segs->ds_addr;
932 sg->len = dm_segs->ds_len;
938 ecb->hecb.flag_word1 |= FW1_SG_ECB;
939 ecb->hecb.data_ptr = ahbsgpaddr(ecb_paddr);
940 ecb->hecb.data_len = sizeof(ahb_sg_t) * nseg;
942 ecb->hecb.data_ptr = ecb->sg_list->addr;
943 ecb->hecb.data_len = ecb->sg_list->len;
946 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
947 /* ecb->hecb.flag_word2 |= FW2_DATA_DIR_IN; */
948 op = BUS_DMASYNC_PREREAD;
950 op = BUS_DMASYNC_PREWRITE;
952 /* ecb->hecb.flag_word2 |= FW2_CHECK_DATA_DIR; */
954 bus_dmamap_sync(ahb->buffer_dmat, ecb->dmamap, op);
957 ecb->hecb.data_ptr = 0;
958 ecb->hecb.data_len = 0;
964 * Last time we need to check if this CCB needs to
967 if (ccb->ccb_h.status != CAM_REQ_INPROG) {
969 bus_dmamap_unload(ahb->buffer_dmat, ecb->dmamap);
970 ahbecbfree(ahb, ecb);
976 ecb->state = ECB_ACTIVE;
977 ccb->ccb_h.status |= CAM_SIM_QUEUED;
978 LIST_INSERT_HEAD(&ahb->pending_ccbs, &ccb->ccb_h, sim_links.le);
980 /* Tell the adapter about this command */
981 ahbqueuembox(ahb, ecb_paddr, ATTN_STARTECB|ccb->ccb_h.target_id);
983 ccb->ccb_h.timeout_ch = timeout(ahbtimeout, (caddr_t)ecb,
984 (ccb->ccb_h.timeout * hz) / 1000);
989 ahbaction(struct cam_sim *sim, union ccb *ccb)
991 struct ahb_softc *ahb;
993 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("ahbaction\n"));
995 ahb = (struct ahb_softc *)cam_sim_softc(sim);
997 switch (ccb->ccb_h.func_code) {
998 /* Common cases first */
999 case XPT_SCSI_IO: /* Execute the requested I/O operation */
1002 struct hardware_ecb *hecb;
1005 * get an ecb to use.
1007 if ((ecb = ahbecbget(ahb)) == NULL) {
1008 /* Should never occur */
1009 panic("Failed to get an ecb");
1013 * So we can find the ECB when an abort is requested
1016 ccb->ccb_h.ccb_ecb_ptr = ecb;
1017 ccb->ccb_h.ccb_ahb_ptr = ahb;
1020 * Put all the arguments for the xfer in the ecb
1023 hecb->opcode = ECBOP_INITIATOR_SCSI_CMD;
1024 hecb->flag_word1 = FW1_AUTO_REQUEST_SENSE
1025 | FW1_ERR_STATUS_BLK_ONLY;
1026 hecb->flag_word2 = ccb->ccb_h.target_lun
1027 | FW2_NO_RETRY_ON_BUSY;
1028 if ((ccb->ccb_h.flags & CAM_TAG_ACTION_VALID) != 0) {
1029 hecb->flag_word2 |= FW2_TAG_ENB
1030 | ((ccb->csio.tag_action & 0x3)
1031 << FW2_TAG_TYPE_SHIFT);
1033 if ((ccb->ccb_h.flags & CAM_DIS_DISCONNECT) != 0)
1034 hecb->flag_word2 |= FW2_DISABLE_DISC;
1035 hecb->sense_len = ccb->csio.sense_len;
1036 hecb->cdb_len = ccb->csio.cdb_len;
1037 if ((ccb->ccb_h.flags & CAM_CDB_POINTER) != 0) {
1038 if ((ccb->ccb_h.flags & CAM_CDB_PHYS) == 0) {
1039 bcopy(ccb->csio.cdb_io.cdb_ptr,
1040 hecb->cdb, hecb->cdb_len);
1042 /* I guess I could map it in... */
1043 ccb->ccb_h.status = CAM_REQ_INVALID;
1044 ahbecbfree(ahb, ecb);
1049 bcopy(ccb->csio.cdb_io.cdb_bytes,
1050 hecb->cdb, hecb->cdb_len);
1054 * If we have any data to send with this command,
1055 * map it into bus space.
1057 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
1058 if ((ccb->ccb_h.flags & CAM_SCATTER_VALID) == 0) {
1060 * We've been given a pointer
1061 * to a single buffer.
1063 if ((ccb->ccb_h.flags & CAM_DATA_PHYS)==0) {
1068 error = bus_dmamap_load(
1072 ccb->csio.dxfer_len,
1075 if (error == EINPROGRESS) {
1077 * So as to maintain ordering,
1078 * freeze the controller queue
1079 * until our mapping is
1082 xpt_freeze_simq(ahb->sim, 1);
1083 ccb->ccb_h.status |=
1088 struct bus_dma_segment seg;
1090 /* Pointer to physical buffer */
1092 (bus_addr_t)ccb->csio.data_ptr;
1093 seg.ds_len = ccb->csio.dxfer_len;
1094 ahbexecuteecb(ecb, &seg, 1, 0);
1097 struct bus_dma_segment *segs;
1099 if ((ccb->ccb_h.flags & CAM_DATA_PHYS) != 0)
1100 panic("ahbaction - Physical segment "
1101 "pointers unsupported");
1103 if ((ccb->ccb_h.flags & CAM_SG_LIST_PHYS) == 0)
1104 panic("btaction - Virtual segment "
1105 "addresses unsupported");
1107 /* Just use the segments provided */
1108 segs = (struct bus_dma_segment *)
1110 ahbexecuteecb(ecb, segs, ccb->csio.sglist_cnt,
1114 ahbexecuteecb(ecb, NULL, 0, 0);
1118 case XPT_EN_LUN: /* Enable LUN as a target */
1119 case XPT_TARGET_IO: /* Execute target I/O request */
1120 case XPT_ACCEPT_TARGET_IO: /* Accept Host Target Mode CDB */
1121 case XPT_CONT_TARGET_IO: /* Continue Host Target I/O Connection*/
1122 case XPT_ABORT: /* Abort the specified CCB */
1124 ccb->ccb_h.status = CAM_REQ_INVALID;
1127 case XPT_SET_TRAN_SETTINGS:
1129 ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
1133 case XPT_GET_TRAN_SETTINGS:
1134 /* Get default/user set transfer settings for the target */
1136 struct ccb_trans_settings *cts = &ccb->cts;
1137 u_int target_mask = 0x01 << ccb->ccb_h.target_id;
1138 struct ccb_trans_settings_scsi *scsi =
1139 &cts->proto_specific.scsi;
1140 struct ccb_trans_settings_spi *spi =
1141 &cts->xport_specific.spi;
1143 if (cts->type == CTS_TYPE_USER_SETTINGS) {
1144 cts->protocol = PROTO_SCSI;
1145 cts->protocol_version = SCSI_REV_2;
1146 cts->transport = XPORT_SPI;
1147 cts->transport_version = 2;
1149 scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB;
1150 spi->flags &= ~CTS_SPI_FLAGS_DISC_ENB;
1151 if ((ahb->disc_permitted & target_mask) != 0)
1152 spi->flags |= CTS_SPI_FLAGS_DISC_ENB;
1153 if ((ahb->tags_permitted & target_mask) != 0)
1154 scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB;
1155 spi->bus_width = MSG_EXT_WDTR_BUS_8_BIT;
1156 spi->sync_period = 25; /* 10MHz */
1158 if (spi->sync_period != 0)
1159 spi->sync_offset = 15;
1161 spi->valid = CTS_SPI_VALID_SYNC_RATE
1162 | CTS_SPI_VALID_SYNC_OFFSET
1163 | CTS_SPI_VALID_BUS_WIDTH
1164 | CTS_SPI_VALID_DISC;
1165 scsi->valid = CTS_SCSI_VALID_TQ;
1166 ccb->ccb_h.status = CAM_REQ_CMP;
1168 ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
1173 case XPT_RESET_DEV: /* Bus Device Reset the specified SCSI device */
1179 ahb->immed_cmd = IMMED_RESET;
1180 ahbqueuembox(ahb, IMMED_RESET, ATTN_IMMED|ccb->ccb_h.target_id);
1181 /* Poll for interrupt completion */
1182 for (i = 1000; ahb->immed_cmd != 0 && i != 0; i--) {
1184 ahbintr(cam_sim_softc(sim));
1189 case XPT_CALC_GEOMETRY:
1191 cam_calc_geometry(&ccb->ccg, ahb->extended_trans);
1195 case XPT_RESET_BUS: /* Reset the specified SCSI bus */
1199 ahb->immed_cmd = IMMED_RESET;
1200 ahbqueuembox(ahb, IMMED_RESET, ATTN_IMMED|ahb->scsi_id);
1201 /* Poll for interrupt completion */
1202 for (i = 1000; ahb->immed_cmd != 0 && i != 0; i--)
1204 ccb->ccb_h.status = CAM_REQ_CMP;
1208 case XPT_TERM_IO: /* Terminate the I/O process */
1210 ccb->ccb_h.status = CAM_REQ_INVALID;
1213 case XPT_PATH_INQ: /* Path routing inquiry */
1215 struct ccb_pathinq *cpi = &ccb->cpi;
1217 cpi->version_num = 1; /* XXX??? */
1218 cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE;
1219 cpi->target_sprt = 0;
1221 cpi->hba_eng_cnt = 0;
1222 cpi->max_target = 7;
1224 cpi->initiator_id = ahb->scsi_id;
1225 cpi->bus_id = cam_sim_bus(sim);
1226 cpi->base_transfer_speed = 3300;
1227 strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
1228 strncpy(cpi->hba_vid, "Adaptec", HBA_IDLEN);
1229 strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
1230 cpi->unit_number = cam_sim_unit(sim);
1231 cpi->transport = XPORT_SPI;
1232 cpi->transport_version = 2;
1233 cpi->protocol = PROTO_SCSI;
1234 cpi->protocol_version = SCSI_REV_2;
1235 cpi->ccb_h.status = CAM_REQ_CMP;
1241 case XPT_IMMED_NOTIFY: /* Notify Host Target driver of event */
1242 case XPT_NOTIFY_ACK: /* Acknowledgement of event */
1245 ccb->ccb_h.status = CAM_REQ_INVALID;
1252 ahbpoll(struct cam_sim *sim)
1254 ahbintr(cam_sim_softc(sim));
1258 ahbtimeout(void *arg)
1262 struct ahb_softc *ahb;
1265 ecb = (struct ecb *)arg;
1267 ahb = (struct ahb_softc *)ccb->ccb_h.ccb_ahb_ptr;
1268 xpt_print_path(ccb->ccb_h.path);
1269 printf("ECB %p - timed out\n", (void *)ecb);
1273 if ((ecb->state & ECB_ACTIVE) == 0) {
1274 xpt_print_path(ccb->ccb_h.path);
1275 printf("ECB %p - timed out ECB already completed\n",
1281 * In order to simplify the recovery process, we ask the XPT
1282 * layer to halt the queue of new transactions and we traverse
1283 * the list of pending CCBs and remove their timeouts. This
1284 * means that the driver attempts to clear only one error
1285 * condition at a time. In general, timeouts that occur
1286 * close together are related anyway, so there is no benefit
1287 * in attempting to handle errors in parrallel. Timeouts will
1288 * be reinstated when the recovery process ends.
1290 if ((ecb->state & ECB_DEVICE_RESET) == 0) {
1291 struct ccb_hdr *ccb_h;
1293 if ((ecb->state & ECB_RELEASE_SIMQ) == 0) {
1294 xpt_freeze_simq(ahb->sim, /*count*/1);
1295 ecb->state |= ECB_RELEASE_SIMQ;
1298 ccb_h = LIST_FIRST(&ahb->pending_ccbs);
1299 while (ccb_h != NULL) {
1300 struct ecb *pending_ecb;
1302 pending_ecb = (struct ecb *)ccb_h->ccb_ecb_ptr;
1303 untimeout(ahbtimeout, pending_ecb, ccb_h->timeout_ch);
1304 ccb_h = LIST_NEXT(ccb_h, sim_links.le);
1307 /* Store for our interrupt handler */
1308 ahb->immed_ecb = ecb;
1311 * Send a Bus Device Reset message:
1312 * The target that is holding up the bus may not
1313 * be the same as the one that triggered this timeout
1314 * (different commands have different timeout lengths),
1315 * but we have no way of determining this from our
1316 * timeout handler. Our strategy here is to queue a
1317 * BDR message to the target of the timed out command.
1318 * If this fails, we'll get another timeout 2 seconds
1319 * later which will attempt a bus reset.
1321 xpt_print_path(ccb->ccb_h.path);
1322 printf("Queuing BDR\n");
1323 ecb->state |= ECB_DEVICE_RESET;
1324 ccb->ccb_h.timeout_ch =
1325 timeout(ahbtimeout, (caddr_t)ecb, 2 * hz);
1327 ahb->immed_cmd = IMMED_RESET;
1328 ahbqueuembox(ahb, IMMED_RESET, ATTN_IMMED|ccb->ccb_h.target_id);
1329 } else if ((ecb->state & ECB_SCSIBUS_RESET) != 0) {
1331 * Try a SCSI bus reset. We do this only if we
1332 * have already attempted to clear the condition with a BDR.
1334 xpt_print_path(ccb->ccb_h.path);
1335 printf("Attempting SCSI Bus reset\n");
1336 ecb->state |= ECB_SCSIBUS_RESET;
1337 ccb->ccb_h.timeout_ch =
1338 timeout(ahbtimeout, (caddr_t)ecb, 2 * hz);
1339 ahb->immed_cmd = IMMED_RESET;
1340 ahbqueuembox(ahb, IMMED_RESET, ATTN_IMMED|ahb->scsi_id);
1342 /* Bring out the hammer... */
1345 /* Simulate the reset complete interrupt */
1346 ahbhandleimmed(ahb, 0, ahb->scsi_id|INTSTAT_IMMED_OK);
1352 static device_method_t ahb_eisa_methods[] = {
1353 /* Device interface */
1354 DEVMETHOD(device_probe, ahbprobe),
1355 DEVMETHOD(device_attach, ahbattach),
1360 static driver_t ahb_eisa_driver = {
1366 static devclass_t ahb_devclass;
1368 DRIVER_MODULE(ahb, eisa, ahb_eisa_driver, ahb_devclass, 0, 0);