2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
4 * Copyright (c) 2009-2012 Alexander Motin <mav@FreeBSD.org>
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer,
12 * without modification, immediately at the beginning of the file.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
29 #include <sys/cdefs.h>
30 __FBSDID("$FreeBSD$");
32 #include <sys/param.h>
33 #include <sys/module.h>
34 #include <sys/systm.h>
35 #include <sys/kernel.h>
38 #include <sys/endian.h>
39 #include <sys/malloc.h>
41 #include <sys/mutex.h>
42 #include <sys/sysctl.h>
43 #include <machine/stdarg.h>
44 #include <machine/resource.h>
45 #include <machine/bus.h>
50 #include <cam/cam_ccb.h>
51 #include <cam/cam_sim.h>
52 #include <cam/cam_xpt_sim.h>
53 #include <cam/cam_debug.h>
55 /* local prototypes */
56 static void ahci_intr(void *data);
57 static void ahci_intr_one(void *data);
58 static void ahci_intr_one_edge(void *data);
59 static int ahci_ch_init(device_t dev);
60 static int ahci_ch_deinit(device_t dev);
61 static int ahci_ch_suspend(device_t dev);
62 static int ahci_ch_resume(device_t dev);
63 static void ahci_ch_pm(void *arg);
64 static void ahci_ch_intr(void *arg);
65 static void ahci_ch_intr_direct(void *arg);
66 static void ahci_ch_intr_main(struct ahci_channel *ch, uint32_t istatus);
67 static void ahci_begin_transaction(struct ahci_channel *ch, union ccb *ccb);
68 static void ahci_dmasetprd(void *arg, bus_dma_segment_t *segs, int nsegs, int error);
69 static void ahci_execute_transaction(struct ahci_slot *slot);
70 static void ahci_timeout(struct ahci_slot *slot);
71 static void ahci_end_transaction(struct ahci_slot *slot, enum ahci_err_type et);
72 static int ahci_setup_fis(struct ahci_channel *ch, struct ahci_cmd_tab *ctp, union ccb *ccb, int tag);
73 static void ahci_dmainit(device_t dev);
74 static void ahci_dmasetupc_cb(void *xsc, bus_dma_segment_t *segs, int nsegs, int error);
75 static void ahci_dmafini(device_t dev);
76 static void ahci_slotsalloc(device_t dev);
77 static void ahci_slotsfree(device_t dev);
78 static void ahci_reset(struct ahci_channel *ch);
79 static void ahci_start(struct ahci_channel *ch, int fbs);
80 static void ahci_stop(struct ahci_channel *ch);
81 static void ahci_clo(struct ahci_channel *ch);
82 static void ahci_start_fr(struct ahci_channel *ch);
83 static void ahci_stop_fr(struct ahci_channel *ch);
84 static int ahci_phy_check_events(struct ahci_channel *ch, u_int32_t serr);
85 static uint32_t ahci_ch_detval(struct ahci_channel *ch, uint32_t val);
87 static int ahci_sata_connect(struct ahci_channel *ch);
88 static int ahci_sata_phy_reset(struct ahci_channel *ch);
89 static int ahci_wait_ready(struct ahci_channel *ch, int t, int t0);
91 static void ahci_issue_recovery(struct ahci_channel *ch);
92 static void ahci_process_read_log(struct ahci_channel *ch, union ccb *ccb);
93 static void ahci_process_request_sense(struct ahci_channel *ch, union ccb *ccb);
95 static void ahciaction(struct cam_sim *sim, union ccb *ccb);
96 static void ahcipoll(struct cam_sim *sim);
98 static MALLOC_DEFINE(M_AHCI, "AHCI driver", "AHCI driver data buffers");
100 #define recovery_type spriv_field0
101 #define RECOVERY_NONE 0
102 #define RECOVERY_READ_LOG 1
103 #define RECOVERY_REQUEST_SENSE 2
104 #define recovery_slot spriv_field1
107 ahci_ch_detval(struct ahci_channel *ch, uint32_t val)
110 return ch->disablephy ? ATA_SC_DET_DISABLE : val;
114 ahci_ctlr_setup(device_t dev)
116 struct ahci_controller *ctlr = device_get_softc(dev);
117 /* Clear interrupts */
118 ATA_OUTL(ctlr->r_mem, AHCI_IS, ATA_INL(ctlr->r_mem, AHCI_IS));
121 ATA_OUTL(ctlr->r_mem, AHCI_CCCP, ATA_INL(ctlr->r_mem, AHCI_PI));
122 ATA_OUTL(ctlr->r_mem, AHCI_CCCC,
123 (ctlr->ccc << AHCI_CCCC_TV_SHIFT) |
124 (4 << AHCI_CCCC_CC_SHIFT) |
126 ctlr->cccv = (ATA_INL(ctlr->r_mem, AHCI_CCCC) &
127 AHCI_CCCC_INT_MASK) >> AHCI_CCCC_INT_SHIFT;
130 "CCC with %dms/4cmd enabled on vector %d\n",
131 ctlr->ccc, ctlr->cccv);
134 /* Enable AHCI interrupts */
135 ATA_OUTL(ctlr->r_mem, AHCI_GHC,
136 ATA_INL(ctlr->r_mem, AHCI_GHC) | AHCI_GHC_IE);
141 ahci_ctlr_reset(device_t dev)
143 struct ahci_controller *ctlr = device_get_softc(dev);
146 /* Enable AHCI mode */
147 ATA_OUTL(ctlr->r_mem, AHCI_GHC, AHCI_GHC_AE);
148 /* Reset AHCI controller */
149 ATA_OUTL(ctlr->r_mem, AHCI_GHC, AHCI_GHC_AE|AHCI_GHC_HR);
150 for (timeout = 1000; timeout > 0; timeout--) {
152 if ((ATA_INL(ctlr->r_mem, AHCI_GHC) & AHCI_GHC_HR) == 0)
156 device_printf(dev, "AHCI controller reset failure\n");
159 /* Reenable AHCI mode */
160 ATA_OUTL(ctlr->r_mem, AHCI_GHC, AHCI_GHC_AE);
162 if (ctlr->quirks & AHCI_Q_RESTORE_CAP) {
164 * Restore capability field.
165 * This is write to a read-only register to restore its state.
166 * On fully standard-compliant hardware this is not needed and
167 * this operation shall not take place. See ahci_pci.c for
168 * platforms using this quirk.
170 ATA_OUTL(ctlr->r_mem, AHCI_CAP, ctlr->caps);
178 ahci_attach(device_t dev)
180 struct ahci_controller *ctlr = device_get_softc(dev);
181 int error, i, speed, unit;
187 resource_int_value(device_get_name(dev),
188 device_get_unit(dev), "ccc", &ctlr->ccc);
189 mtx_init(&ctlr->ch_mtx, "AHCI channels lock", NULL, MTX_DEF);
191 /* Setup our own memory management for channels. */
192 ctlr->sc_iomem.rm_start = rman_get_start(ctlr->r_mem);
193 ctlr->sc_iomem.rm_end = rman_get_end(ctlr->r_mem);
194 ctlr->sc_iomem.rm_type = RMAN_ARRAY;
195 ctlr->sc_iomem.rm_descr = "I/O memory addresses";
196 if ((error = rman_init(&ctlr->sc_iomem)) != 0) {
200 if ((error = rman_manage_region(&ctlr->sc_iomem,
201 rman_get_start(ctlr->r_mem), rman_get_end(ctlr->r_mem))) != 0) {
203 rman_fini(&ctlr->sc_iomem);
206 /* Get the HW capabilities */
207 version = ATA_INL(ctlr->r_mem, AHCI_VS);
208 ctlr->caps = ATA_INL(ctlr->r_mem, AHCI_CAP);
209 if (version >= 0x00010200)
210 ctlr->caps2 = ATA_INL(ctlr->r_mem, AHCI_CAP2);
211 if (ctlr->caps & AHCI_CAP_EMS)
212 ctlr->capsem = ATA_INL(ctlr->r_mem, AHCI_EM_CTL);
214 if (ctlr->quirks & AHCI_Q_FORCE_PI) {
217 * The spec says that BIOS sets up bits corresponding to
218 * available ports. On platforms where this information
219 * is missing, the driver can define available ports on its own.
221 int nports = (ctlr->caps & AHCI_CAP_NPMASK) + 1;
222 int nmask = (1 << nports) - 1;
224 ATA_OUTL(ctlr->r_mem, AHCI_PI, nmask);
225 device_printf(dev, "Forcing PI to %d ports (mask = %x)\n",
229 ctlr->ichannels = ATA_INL(ctlr->r_mem, AHCI_PI);
231 /* Identify and set separate quirks for HBA and RAID f/w Marvells. */
232 if ((ctlr->quirks & AHCI_Q_ALTSIG) &&
233 (ctlr->caps & AHCI_CAP_SPM) == 0)
234 ctlr->quirks |= AHCI_Q_NOBSYRES;
236 if (ctlr->quirks & AHCI_Q_1CH) {
237 ctlr->caps &= ~AHCI_CAP_NPMASK;
238 ctlr->ichannels &= 0x01;
240 if (ctlr->quirks & AHCI_Q_2CH) {
241 ctlr->caps &= ~AHCI_CAP_NPMASK;
243 ctlr->ichannels &= 0x03;
245 if (ctlr->quirks & AHCI_Q_4CH) {
246 ctlr->caps &= ~AHCI_CAP_NPMASK;
248 ctlr->ichannels &= 0x0f;
250 ctlr->channels = MAX(flsl(ctlr->ichannels),
251 (ctlr->caps & AHCI_CAP_NPMASK) + 1);
252 if (ctlr->quirks & AHCI_Q_NOPMP)
253 ctlr->caps &= ~AHCI_CAP_SPM;
254 if (ctlr->quirks & AHCI_Q_NONCQ)
255 ctlr->caps &= ~AHCI_CAP_SNCQ;
256 if ((ctlr->caps & AHCI_CAP_CCCS) == 0)
258 ctlr->emloc = ATA_INL(ctlr->r_mem, AHCI_EM_LOC);
260 /* Create controller-wide DMA tag. */
261 if (bus_dma_tag_create(bus_get_dma_tag(dev), 1, 0,
262 (ctlr->caps & AHCI_CAP_64BIT) ? BUS_SPACE_MAXADDR :
263 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
264 BUS_SPACE_MAXSIZE, BUS_SPACE_UNRESTRICTED, BUS_SPACE_MAXSIZE,
265 ctlr->dma_coherent ? BUS_DMA_COHERENT : 0, NULL, NULL,
268 rman_fini(&ctlr->sc_iomem);
272 ahci_ctlr_setup(dev);
274 /* Setup interrupts. */
275 if ((error = ahci_setup_interrupt(dev)) != 0) {
276 bus_dma_tag_destroy(ctlr->dma_tag);
278 rman_fini(&ctlr->sc_iomem);
283 for (u = ctlr->ichannels; u != 0; u >>= 1)
285 ctlr->direct = (ctlr->msi && (ctlr->numirqs > 1 || i <= 3));
286 resource_int_value(device_get_name(dev), device_get_unit(dev),
287 "direct", &ctlr->direct);
288 /* Announce HW capabilities. */
289 speed = (ctlr->caps & AHCI_CAP_ISS) >> AHCI_CAP_ISS_SHIFT;
291 "AHCI v%x.%02x with %d %sGbps ports, Port Multiplier %s%s\n",
292 ((version >> 20) & 0xf0) + ((version >> 16) & 0x0f),
293 ((version >> 4) & 0xf0) + (version & 0x0f),
294 (ctlr->caps & AHCI_CAP_NPMASK) + 1,
295 ((speed == 1) ? "1.5":((speed == 2) ? "3":
296 ((speed == 3) ? "6":"?"))),
297 (ctlr->caps & AHCI_CAP_SPM) ?
298 "supported" : "not supported",
299 (ctlr->caps & AHCI_CAP_FBSS) ?
301 if (ctlr->quirks != 0) {
302 device_printf(dev, "quirks=0x%b\n", ctlr->quirks,
306 device_printf(dev, "Caps:%s%s%s%s%s%s%s%s %sGbps",
307 (ctlr->caps & AHCI_CAP_64BIT) ? " 64bit":"",
308 (ctlr->caps & AHCI_CAP_SNCQ) ? " NCQ":"",
309 (ctlr->caps & AHCI_CAP_SSNTF) ? " SNTF":"",
310 (ctlr->caps & AHCI_CAP_SMPS) ? " MPS":"",
311 (ctlr->caps & AHCI_CAP_SSS) ? " SS":"",
312 (ctlr->caps & AHCI_CAP_SALP) ? " ALP":"",
313 (ctlr->caps & AHCI_CAP_SAL) ? " AL":"",
314 (ctlr->caps & AHCI_CAP_SCLO) ? " CLO":"",
315 ((speed == 1) ? "1.5":((speed == 2) ? "3":
316 ((speed == 3) ? "6":"?"))));
317 printf("%s%s%s%s%s%s %dcmd%s%s%s %dports\n",
318 (ctlr->caps & AHCI_CAP_SAM) ? " AM":"",
319 (ctlr->caps & AHCI_CAP_SPM) ? " PM":"",
320 (ctlr->caps & AHCI_CAP_FBSS) ? " FBS":"",
321 (ctlr->caps & AHCI_CAP_PMD) ? " PMD":"",
322 (ctlr->caps & AHCI_CAP_SSC) ? " SSC":"",
323 (ctlr->caps & AHCI_CAP_PSC) ? " PSC":"",
324 ((ctlr->caps & AHCI_CAP_NCS) >> AHCI_CAP_NCS_SHIFT) + 1,
325 (ctlr->caps & AHCI_CAP_CCCS) ? " CCC":"",
326 (ctlr->caps & AHCI_CAP_EMS) ? " EM":"",
327 (ctlr->caps & AHCI_CAP_SXS) ? " eSATA":"",
328 (ctlr->caps & AHCI_CAP_NPMASK) + 1);
330 if (bootverbose && version >= 0x00010200) {
331 device_printf(dev, "Caps2:%s%s%s%s%s%s\n",
332 (ctlr->caps2 & AHCI_CAP2_DESO) ? " DESO":"",
333 (ctlr->caps2 & AHCI_CAP2_SADM) ? " SADM":"",
334 (ctlr->caps2 & AHCI_CAP2_SDS) ? " SDS":"",
335 (ctlr->caps2 & AHCI_CAP2_APST) ? " APST":"",
336 (ctlr->caps2 & AHCI_CAP2_NVMP) ? " NVMP":"",
337 (ctlr->caps2 & AHCI_CAP2_BOH) ? " BOH":"");
339 /* Attach all channels on this controller */
340 for (unit = 0; unit < ctlr->channels; unit++) {
341 child = device_add_child(dev, "ahcich", -1);
343 device_printf(dev, "failed to add channel device\n");
346 device_set_ivars(child, (void *)(intptr_t)unit);
347 if ((ctlr->ichannels & (1 << unit)) == 0)
348 device_disable(child);
350 /* Attach any remapped NVME device */
351 for (; unit < ctlr->channels + ctlr->remapped_devices; unit++) {
352 child = device_add_child(dev, "nvme", -1);
354 device_printf(dev, "failed to add remapped NVMe device");
357 device_set_ivars(child, (void *)(intptr_t)(unit | AHCI_REMAPPED_UNIT));
360 if (ctlr->caps & AHCI_CAP_EMS) {
361 child = device_add_child(dev, "ahciem", -1);
363 device_printf(dev, "failed to add enclosure device\n");
365 device_set_ivars(child, (void *)(intptr_t)AHCI_EM_UNIT);
367 bus_generic_attach(dev);
372 ahci_detach(device_t dev)
374 struct ahci_controller *ctlr = device_get_softc(dev);
377 /* Detach & delete all children */
378 device_delete_children(dev);
380 /* Free interrupts. */
381 for (i = 0; i < ctlr->numirqs; i++) {
382 if (ctlr->irqs[i].r_irq) {
383 bus_teardown_intr(dev, ctlr->irqs[i].r_irq,
384 ctlr->irqs[i].handle);
385 bus_release_resource(dev, SYS_RES_IRQ,
386 ctlr->irqs[i].r_irq_rid, ctlr->irqs[i].r_irq);
389 bus_dma_tag_destroy(ctlr->dma_tag);
391 rman_fini(&ctlr->sc_iomem);
393 mtx_destroy(&ctlr->ch_mtx);
398 ahci_free_mem(device_t dev)
400 struct ahci_controller *ctlr = device_get_softc(dev);
402 /* Release memory resources */
404 bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_rid, ctlr->r_mem);
405 if (ctlr->r_msix_table)
406 bus_release_resource(dev, SYS_RES_MEMORY,
407 ctlr->r_msix_tab_rid, ctlr->r_msix_table);
408 if (ctlr->r_msix_pba)
409 bus_release_resource(dev, SYS_RES_MEMORY,
410 ctlr->r_msix_pba_rid, ctlr->r_msix_pba);
412 ctlr->r_msix_pba = ctlr->r_mem = ctlr->r_msix_table = NULL;
416 ahci_setup_interrupt(device_t dev)
418 struct ahci_controller *ctlr = device_get_softc(dev);
421 /* Check for single MSI vector fallback. */
422 if (ctlr->numirqs > 1 &&
423 (ATA_INL(ctlr->r_mem, AHCI_GHC) & AHCI_GHC_MRSM) != 0) {
424 device_printf(dev, "Falling back to one MSI\n");
428 /* Ensure we don't overrun irqs. */
429 if (ctlr->numirqs > AHCI_MAX_IRQS) {
430 device_printf(dev, "Too many irqs %d > %d (clamping)\n",
431 ctlr->numirqs, AHCI_MAX_IRQS);
432 ctlr->numirqs = AHCI_MAX_IRQS;
435 /* Allocate all IRQs. */
436 for (i = 0; i < ctlr->numirqs; i++) {
437 ctlr->irqs[i].ctlr = ctlr;
438 ctlr->irqs[i].r_irq_rid = i + (ctlr->msi ? 1 : 0);
439 if (ctlr->channels == 1 && !ctlr->ccc && ctlr->msi)
440 ctlr->irqs[i].mode = AHCI_IRQ_MODE_ONE;
441 else if (ctlr->numirqs == 1 || i >= ctlr->channels ||
442 (ctlr->ccc && i == ctlr->cccv))
443 ctlr->irqs[i].mode = AHCI_IRQ_MODE_ALL;
444 else if (ctlr->channels > ctlr->numirqs &&
445 i == ctlr->numirqs - 1)
446 ctlr->irqs[i].mode = AHCI_IRQ_MODE_AFTER;
448 ctlr->irqs[i].mode = AHCI_IRQ_MODE_ONE;
449 if (!(ctlr->irqs[i].r_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ,
450 &ctlr->irqs[i].r_irq_rid, RF_SHAREABLE | RF_ACTIVE))) {
451 device_printf(dev, "unable to map interrupt\n");
454 if ((bus_setup_intr(dev, ctlr->irqs[i].r_irq, ATA_INTR_FLAGS, NULL,
455 (ctlr->irqs[i].mode != AHCI_IRQ_MODE_ONE) ? ahci_intr :
456 ((ctlr->quirks & AHCI_Q_EDGEIS) ? ahci_intr_one_edge :
458 &ctlr->irqs[i], &ctlr->irqs[i].handle))) {
459 /* SOS XXX release r_irq */
460 device_printf(dev, "unable to setup interrupt\n");
463 if (ctlr->numirqs > 1) {
464 bus_describe_intr(dev, ctlr->irqs[i].r_irq,
465 ctlr->irqs[i].handle,
466 ctlr->irqs[i].mode == AHCI_IRQ_MODE_ONE ?
474 * Common case interrupt handler.
477 ahci_intr(void *data)
479 struct ahci_controller_irq *irq = data;
480 struct ahci_controller *ctlr = irq->ctlr;
481 u_int32_t is, ise = 0;
485 if (irq->mode == AHCI_IRQ_MODE_ALL) {
488 is = ctlr->ichannels;
490 is = ATA_INL(ctlr->r_mem, AHCI_IS);
491 } else { /* AHCI_IRQ_MODE_AFTER */
492 unit = irq->r_irq_rid - 1;
493 is = ATA_INL(ctlr->r_mem, AHCI_IS);
494 is &= (0xffffffff << unit);
496 /* CCC interrupt is edge triggered. */
498 ise = 1 << ctlr->cccv;
499 /* Some controllers have edge triggered IS. */
500 if (ctlr->quirks & AHCI_Q_EDGEIS)
503 ATA_OUTL(ctlr->r_mem, AHCI_IS, ise);
504 for (; unit < ctlr->channels; unit++) {
505 if ((is & (1 << unit)) != 0 &&
506 (arg = ctlr->interrupt[unit].argument)) {
507 ctlr->interrupt[unit].function(arg);
510 for (; unit < ctlr->channels + ctlr->remapped_devices; unit++) {
511 if ((arg = ctlr->interrupt[unit].argument)) {
512 ctlr->interrupt[unit].function(arg);
516 /* AHCI declares level triggered IS. */
517 if (!(ctlr->quirks & AHCI_Q_EDGEIS))
518 ATA_OUTL(ctlr->r_mem, AHCI_IS, is);
519 ATA_RBL(ctlr->r_mem, AHCI_IS);
523 * Simplified interrupt handler for multivector MSI mode.
526 ahci_intr_one(void *data)
528 struct ahci_controller_irq *irq = data;
529 struct ahci_controller *ctlr = irq->ctlr;
533 unit = irq->r_irq_rid - 1;
534 if ((arg = ctlr->interrupt[unit].argument))
535 ctlr->interrupt[unit].function(arg);
536 /* AHCI declares level triggered IS. */
537 ATA_OUTL(ctlr->r_mem, AHCI_IS, 1 << unit);
538 ATA_RBL(ctlr->r_mem, AHCI_IS);
542 ahci_intr_one_edge(void *data)
544 struct ahci_controller_irq *irq = data;
545 struct ahci_controller *ctlr = irq->ctlr;
549 unit = irq->r_irq_rid - 1;
550 /* Some controllers have edge triggered IS. */
551 ATA_OUTL(ctlr->r_mem, AHCI_IS, 1 << unit);
552 if ((arg = ctlr->interrupt[unit].argument))
553 ctlr->interrupt[unit].function(arg);
554 ATA_RBL(ctlr->r_mem, AHCI_IS);
558 ahci_alloc_resource(device_t dev, device_t child, int type, int *rid,
559 rman_res_t start, rman_res_t end, rman_res_t count, u_int flags)
561 struct ahci_controller *ctlr = device_get_softc(dev);
562 struct resource *res;
564 int offset, size, unit;
565 bool is_em, is_remapped;
567 unit = (intptr_t)device_get_ivars(child);
568 is_em = is_remapped = false;
569 if (unit & AHCI_REMAPPED_UNIT) {
571 unit -= ctlr->channels;
573 } else if (unit & AHCI_EM_UNIT) {
581 offset = ctlr->remap_offset + unit * ctlr->remap_size;
582 size = ctlr->remap_size;
584 offset = AHCI_OFFSET + (unit << 7);
586 } else if (*rid == 0) {
587 offset = AHCI_EM_CTL;
590 offset = (ctlr->emloc & 0xffff0000) >> 14;
591 size = (ctlr->emloc & 0x0000ffff) << 2;
593 if (*rid == 2 && (ctlr->capsem &
594 (AHCI_EM_XMT | AHCI_EM_SMB)) == 0)
600 st = rman_get_start(ctlr->r_mem);
601 res = rman_reserve_resource(&ctlr->sc_iomem, st + offset,
602 st + offset + size - 1, size, RF_ACTIVE, child);
604 bus_space_handle_t bsh;
606 bsh = rman_get_bushandle(ctlr->r_mem);
607 bst = rman_get_bustag(ctlr->r_mem);
608 bus_space_subregion(bst, bsh, offset, 128, &bsh);
609 rman_set_bushandle(res, bsh);
610 rman_set_bustag(res, bst);
614 if (*rid == ATA_IRQ_RID)
615 res = ctlr->irqs[0].r_irq;
622 ahci_release_resource(device_t dev, device_t child, int type, int rid,
628 rman_release_resource(r);
631 if (rid != ATA_IRQ_RID)
639 ahci_setup_intr(device_t dev, device_t child, struct resource *irq,
640 int flags, driver_filter_t *filter, driver_intr_t *function,
641 void *argument, void **cookiep)
643 struct ahci_controller *ctlr = device_get_softc(dev);
644 int unit = (intptr_t)device_get_ivars(child) & AHCI_UNIT;
646 if (filter != NULL) {
647 printf("ahci.c: we cannot use a filter here\n");
650 ctlr->interrupt[unit].function = function;
651 ctlr->interrupt[unit].argument = argument;
656 ahci_teardown_intr(device_t dev, device_t child, struct resource *irq,
659 struct ahci_controller *ctlr = device_get_softc(dev);
660 int unit = (intptr_t)device_get_ivars(child) & AHCI_UNIT;
662 ctlr->interrupt[unit].function = NULL;
663 ctlr->interrupt[unit].argument = NULL;
668 ahci_print_child(device_t dev, device_t child)
673 retval = bus_print_child_header(dev, child);
674 ivars = (intptr_t)device_get_ivars(child);
675 if ((ivars & AHCI_EM_UNIT) == 0)
676 retval += printf(" at channel %d", (int)ivars & AHCI_UNIT);
677 retval += bus_print_child_footer(dev, child);
682 ahci_child_location_str(device_t dev, device_t child, char *buf,
687 ivars = (intptr_t)device_get_ivars(child);
688 if ((ivars & AHCI_EM_UNIT) == 0)
689 snprintf(buf, buflen, "channel=%d", (int)ivars & AHCI_UNIT);
694 ahci_get_dma_tag(device_t dev, device_t child)
696 struct ahci_controller *ctlr = device_get_softc(dev);
698 return (ctlr->dma_tag);
702 ahci_attached(device_t dev, struct ahci_channel *ch)
704 struct ahci_controller *ctlr = device_get_softc(dev);
706 mtx_lock(&ctlr->ch_mtx);
707 ctlr->ch[ch->unit] = ch;
708 mtx_unlock(&ctlr->ch_mtx);
712 ahci_detached(device_t dev, struct ahci_channel *ch)
714 struct ahci_controller *ctlr = device_get_softc(dev);
716 mtx_lock(&ctlr->ch_mtx);
718 ctlr->ch[ch->unit] = NULL;
719 mtx_unlock(&ch->mtx);
720 mtx_unlock(&ctlr->ch_mtx);
723 struct ahci_channel *
724 ahci_getch(device_t dev, int n)
726 struct ahci_controller *ctlr = device_get_softc(dev);
727 struct ahci_channel *ch;
729 KASSERT(n >= 0 && n < AHCI_MAX_PORTS, ("Bad channel number %d", n));
730 mtx_lock(&ctlr->ch_mtx);
734 mtx_unlock(&ctlr->ch_mtx);
739 ahci_putch(struct ahci_channel *ch)
742 mtx_unlock(&ch->mtx);
746 ahci_ch_probe(device_t dev)
749 device_set_desc_copy(dev, "AHCI channel");
750 return (BUS_PROBE_DEFAULT);
754 ahci_ch_disablephy_proc(SYSCTL_HANDLER_ARGS)
756 struct ahci_channel *ch;
760 value = ch->disablephy;
761 error = sysctl_handle_int(oidp, &value, 0, req);
762 if (error != 0 || req->newptr == NULL || (value != 0 && value != 1))
766 ch->disablephy = value;
768 ahci_ch_deinit(ch->dev);
770 ahci_ch_init(ch->dev);
771 ahci_phy_check_events(ch, ATA_SE_PHY_CHANGED | ATA_SE_EXCHANGED);
773 mtx_unlock(&ch->mtx);
779 ahci_ch_attach(device_t dev)
781 struct ahci_controller *ctlr = device_get_softc(device_get_parent(dev));
782 struct ahci_channel *ch = device_get_softc(dev);
783 struct cam_devq *devq;
784 struct sysctl_ctx_list *ctx;
785 struct sysctl_oid *tree;
786 int rid, error, i, sata_rev = 0;
790 ch->unit = (intptr_t)device_get_ivars(dev);
791 ch->caps = ctlr->caps;
792 ch->caps2 = ctlr->caps2;
793 ch->start = ctlr->ch_start;
794 ch->quirks = ctlr->quirks;
795 ch->vendorid = ctlr->vendorid;
796 ch->deviceid = ctlr->deviceid;
797 ch->subvendorid = ctlr->subvendorid;
798 ch->subdeviceid = ctlr->subdeviceid;
799 ch->numslots = ((ch->caps & AHCI_CAP_NCS) >> AHCI_CAP_NCS_SHIFT) + 1;
800 mtx_init(&ch->mtx, "AHCI channel lock", NULL, MTX_DEF);
802 resource_int_value(device_get_name(dev),
803 device_get_unit(dev), "pm_level", &ch->pm_level);
804 STAILQ_INIT(&ch->doneq);
805 if (ch->pm_level > 3)
806 callout_init_mtx(&ch->pm_timer, &ch->mtx, 0);
807 callout_init_mtx(&ch->reset_timer, &ch->mtx, 0);
808 /* JMicron external ports (0) sometimes limited */
809 if ((ctlr->quirks & AHCI_Q_SATA1_UNIT0) && ch->unit == 0)
811 if (ch->quirks & AHCI_Q_SATA2)
813 resource_int_value(device_get_name(dev),
814 device_get_unit(dev), "sata_rev", &sata_rev);
815 for (i = 0; i < 16; i++) {
816 ch->user[i].revision = sata_rev;
817 ch->user[i].mode = 0;
818 ch->user[i].bytecount = 8192;
819 ch->user[i].tags = ch->numslots;
820 ch->user[i].caps = 0;
821 ch->curr[i] = ch->user[i];
823 ch->user[i].caps = CTS_SATA_CAPS_H_PMREQ |
824 CTS_SATA_CAPS_H_APST |
825 CTS_SATA_CAPS_D_PMREQ | CTS_SATA_CAPS_D_APST;
827 ch->user[i].caps |= CTS_SATA_CAPS_H_DMAAA |
831 if (!(ch->r_mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
834 ch->chcaps = ATA_INL(ch->r_mem, AHCI_P_CMD);
835 version = ATA_INL(ctlr->r_mem, AHCI_VS);
836 if (version < 0x00010200 && (ctlr->caps & AHCI_CAP_FBSS))
837 ch->chcaps |= AHCI_P_CMD_FBSCP;
838 if (ch->caps2 & AHCI_CAP2_SDS)
839 ch->chscaps = ATA_INL(ch->r_mem, AHCI_P_DEVSLP);
841 device_printf(dev, "Caps:%s%s%s%s%s%s\n",
842 (ch->chcaps & AHCI_P_CMD_HPCP) ? " HPCP":"",
843 (ch->chcaps & AHCI_P_CMD_MPSP) ? " MPSP":"",
844 (ch->chcaps & AHCI_P_CMD_CPD) ? " CPD":"",
845 (ch->chcaps & AHCI_P_CMD_ESP) ? " ESP":"",
846 (ch->chcaps & AHCI_P_CMD_FBSCP) ? " FBSCP":"",
847 (ch->chscaps & AHCI_P_DEVSLP_DSP) ? " DSP":"");
850 ahci_slotsalloc(dev);
854 if (!(ch->r_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ,
855 &rid, RF_SHAREABLE | RF_ACTIVE))) {
856 device_printf(dev, "Unable to map interrupt\n");
860 if ((bus_setup_intr(dev, ch->r_irq, ATA_INTR_FLAGS, NULL,
861 ctlr->direct ? ahci_ch_intr_direct : ahci_ch_intr,
863 device_printf(dev, "Unable to setup interrupt\n");
867 /* Create the device queue for our SIM. */
868 devq = cam_simq_alloc(ch->numslots);
870 device_printf(dev, "Unable to allocate simq\n");
874 /* Construct SIM entry */
875 ch->sim = cam_sim_alloc(ahciaction, ahcipoll, "ahcich", ch,
876 device_get_unit(dev), (struct mtx *)&ch->mtx,
877 (ch->quirks & AHCI_Q_NOCCS) ? 1 : min(2, ch->numslots),
878 (ch->caps & AHCI_CAP_SNCQ) ? ch->numslots : 0,
880 if (ch->sim == NULL) {
882 device_printf(dev, "unable to allocate sim\n");
886 if (xpt_bus_register(ch->sim, dev, 0) != CAM_SUCCESS) {
887 device_printf(dev, "unable to register xpt bus\n");
891 if (xpt_create_path(&ch->path, /*periph*/NULL, cam_sim_path(ch->sim),
892 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
893 device_printf(dev, "unable to create path\n");
897 if (ch->pm_level > 3) {
898 callout_reset(&ch->pm_timer,
899 (ch->pm_level == 4) ? hz / 1000 : hz / 8,
902 mtx_unlock(&ch->mtx);
903 ahci_attached(device_get_parent(dev), ch);
904 ctx = device_get_sysctl_ctx(dev);
905 tree = device_get_sysctl_tree(dev);
906 SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "disable_phy",
907 CTLFLAG_RW | CTLTYPE_UINT, ch, 0, ahci_ch_disablephy_proc, "IU",
912 xpt_bus_deregister(cam_sim_path(ch->sim));
914 cam_sim_free(ch->sim, /*free_devq*/TRUE);
916 bus_release_resource(dev, SYS_RES_IRQ, ATA_IRQ_RID, ch->r_irq);
918 bus_release_resource(dev, SYS_RES_MEMORY, ch->unit, ch->r_mem);
919 mtx_unlock(&ch->mtx);
920 mtx_destroy(&ch->mtx);
925 ahci_ch_detach(device_t dev)
927 struct ahci_channel *ch = device_get_softc(dev);
929 ahci_detached(device_get_parent(dev), ch);
931 xpt_async(AC_LOST_DEVICE, ch->path, NULL);
932 /* Forget about reset. */
935 xpt_release_simq(ch->sim, TRUE);
937 xpt_free_path(ch->path);
938 xpt_bus_deregister(cam_sim_path(ch->sim));
939 cam_sim_free(ch->sim, /*free_devq*/TRUE);
940 mtx_unlock(&ch->mtx);
942 if (ch->pm_level > 3)
943 callout_drain(&ch->pm_timer);
944 callout_drain(&ch->reset_timer);
945 bus_teardown_intr(dev, ch->r_irq, ch->ih);
946 bus_release_resource(dev, SYS_RES_IRQ, ATA_IRQ_RID, ch->r_irq);
952 bus_release_resource(dev, SYS_RES_MEMORY, ch->unit, ch->r_mem);
953 mtx_destroy(&ch->mtx);
958 ahci_ch_init(device_t dev)
960 struct ahci_channel *ch = device_get_softc(dev);
963 /* Disable port interrupts */
964 ATA_OUTL(ch->r_mem, AHCI_P_IE, 0);
965 /* Setup work areas */
966 work = ch->dma.work_bus + AHCI_CL_OFFSET;
967 ATA_OUTL(ch->r_mem, AHCI_P_CLB, work & 0xffffffff);
968 ATA_OUTL(ch->r_mem, AHCI_P_CLBU, work >> 32);
969 work = ch->dma.rfis_bus;
970 ATA_OUTL(ch->r_mem, AHCI_P_FB, work & 0xffffffff);
971 ATA_OUTL(ch->r_mem, AHCI_P_FBU, work >> 32);
972 /* Activate the channel and power/spin up device */
973 ATA_OUTL(ch->r_mem, AHCI_P_CMD,
974 (AHCI_P_CMD_ACTIVE | AHCI_P_CMD_POD | AHCI_P_CMD_SUD |
975 ((ch->pm_level == 2 || ch->pm_level == 3) ? AHCI_P_CMD_ALPE : 0) |
976 ((ch->pm_level > 2) ? AHCI_P_CMD_ASP : 0 )));
983 ahci_ch_deinit(device_t dev)
985 struct ahci_channel *ch = device_get_softc(dev);
987 /* Disable port interrupts. */
988 ATA_OUTL(ch->r_mem, AHCI_P_IE, 0);
989 /* Reset command register. */
992 ATA_OUTL(ch->r_mem, AHCI_P_CMD, 0);
993 /* Allow everything, including partial and slumber modes. */
994 ATA_OUTL(ch->r_mem, AHCI_P_SCTL, 0);
995 /* Request slumber mode transition and give some time to get there. */
996 ATA_OUTL(ch->r_mem, AHCI_P_CMD, AHCI_P_CMD_SLUMBER);
999 ATA_OUTL(ch->r_mem, AHCI_P_SCTL, ATA_SC_DET_DISABLE);
1004 ahci_ch_suspend(device_t dev)
1006 struct ahci_channel *ch = device_get_softc(dev);
1009 xpt_freeze_simq(ch->sim, 1);
1010 /* Forget about reset. */
1011 if (ch->resetting) {
1013 callout_stop(&ch->reset_timer);
1014 xpt_release_simq(ch->sim, TRUE);
1017 msleep(ch, &ch->mtx, PRIBIO, "ahcisusp", hz/100);
1018 ahci_ch_deinit(dev);
1019 mtx_unlock(&ch->mtx);
1024 ahci_ch_resume(device_t dev)
1026 struct ahci_channel *ch = device_get_softc(dev);
1031 xpt_release_simq(ch->sim, TRUE);
1032 mtx_unlock(&ch->mtx);
1036 devclass_t ahcich_devclass;
1037 static device_method_t ahcich_methods[] = {
1038 DEVMETHOD(device_probe, ahci_ch_probe),
1039 DEVMETHOD(device_attach, ahci_ch_attach),
1040 DEVMETHOD(device_detach, ahci_ch_detach),
1041 DEVMETHOD(device_suspend, ahci_ch_suspend),
1042 DEVMETHOD(device_resume, ahci_ch_resume),
1045 static driver_t ahcich_driver = {
1048 sizeof(struct ahci_channel)
1050 DRIVER_MODULE(ahcich, ahci, ahcich_driver, ahcich_devclass, NULL, NULL);
1052 struct ahci_dc_cb_args {
1058 ahci_dmainit(device_t dev)
1060 struct ahci_channel *ch = device_get_softc(dev);
1061 struct ahci_dc_cb_args dcba;
1066 error = bus_dma_tag_create(bus_get_dma_tag(dev), 1024, 0,
1067 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR,
1068 NULL, NULL, AHCI_WORK_SIZE, 1, AHCI_WORK_SIZE,
1069 0, NULL, NULL, &ch->dma.work_tag);
1072 error = bus_dmamem_alloc(ch->dma.work_tag, (void **)&ch->dma.work,
1073 BUS_DMA_ZERO, &ch->dma.work_map);
1076 error = bus_dmamap_load(ch->dma.work_tag, ch->dma.work_map, ch->dma.work,
1077 AHCI_WORK_SIZE, ahci_dmasetupc_cb, &dcba, BUS_DMA_NOWAIT);
1078 if (error != 0 || (error = dcba.error) != 0) {
1079 bus_dmamem_free(ch->dma.work_tag, ch->dma.work, ch->dma.work_map);
1082 ch->dma.work_bus = dcba.maddr;
1083 /* FIS receive area. */
1084 if (ch->chcaps & AHCI_P_CMD_FBSCP)
1088 error = bus_dma_tag_create(bus_get_dma_tag(dev), rfsize, 0,
1089 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR,
1090 NULL, NULL, rfsize, 1, rfsize,
1091 0, NULL, NULL, &ch->dma.rfis_tag);
1094 error = bus_dmamem_alloc(ch->dma.rfis_tag, (void **)&ch->dma.rfis, 0,
1098 error = bus_dmamap_load(ch->dma.rfis_tag, ch->dma.rfis_map, ch->dma.rfis,
1099 rfsize, ahci_dmasetupc_cb, &dcba, BUS_DMA_NOWAIT);
1100 if (error != 0 || (error = dcba.error) != 0) {
1101 bus_dmamem_free(ch->dma.rfis_tag, ch->dma.rfis, ch->dma.rfis_map);
1104 ch->dma.rfis_bus = dcba.maddr;
1106 error = bus_dma_tag_create(bus_get_dma_tag(dev), 2, 0,
1107 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR,
1109 AHCI_SG_ENTRIES * PAGE_SIZE * ch->numslots,
1110 AHCI_SG_ENTRIES, AHCI_PRD_MAX,
1111 0, busdma_lock_mutex, &ch->mtx, &ch->dma.data_tag);
1117 device_printf(dev, "WARNING - DMA initialization failed, error %d\n",
1123 ahci_dmasetupc_cb(void *xsc, bus_dma_segment_t *segs, int nsegs, int error)
1125 struct ahci_dc_cb_args *dcba = (struct ahci_dc_cb_args *)xsc;
1127 if (!(dcba->error = error))
1128 dcba->maddr = segs[0].ds_addr;
1132 ahci_dmafini(device_t dev)
1134 struct ahci_channel *ch = device_get_softc(dev);
1136 if (ch->dma.data_tag) {
1137 bus_dma_tag_destroy(ch->dma.data_tag);
1138 ch->dma.data_tag = NULL;
1140 if (ch->dma.rfis_bus) {
1141 bus_dmamap_unload(ch->dma.rfis_tag, ch->dma.rfis_map);
1142 bus_dmamem_free(ch->dma.rfis_tag, ch->dma.rfis, ch->dma.rfis_map);
1143 ch->dma.rfis_bus = 0;
1144 ch->dma.rfis = NULL;
1146 if (ch->dma.work_bus) {
1147 bus_dmamap_unload(ch->dma.work_tag, ch->dma.work_map);
1148 bus_dmamem_free(ch->dma.work_tag, ch->dma.work, ch->dma.work_map);
1149 ch->dma.work_bus = 0;
1150 ch->dma.work = NULL;
1152 if (ch->dma.work_tag) {
1153 bus_dma_tag_destroy(ch->dma.work_tag);
1154 ch->dma.work_tag = NULL;
1159 ahci_slotsalloc(device_t dev)
1161 struct ahci_channel *ch = device_get_softc(dev);
1164 /* Alloc and setup command/dma slots */
1165 bzero(ch->slot, sizeof(ch->slot));
1166 for (i = 0; i < ch->numslots; i++) {
1167 struct ahci_slot *slot = &ch->slot[i];
1171 slot->state = AHCI_SLOT_EMPTY;
1173 callout_init_mtx(&slot->timeout, &ch->mtx, 0);
1175 if (bus_dmamap_create(ch->dma.data_tag, 0, &slot->dma.data_map))
1176 device_printf(ch->dev, "FAILURE - create data_map\n");
1181 ahci_slotsfree(device_t dev)
1183 struct ahci_channel *ch = device_get_softc(dev);
1186 /* Free all dma slots */
1187 for (i = 0; i < ch->numslots; i++) {
1188 struct ahci_slot *slot = &ch->slot[i];
1190 callout_drain(&slot->timeout);
1191 if (slot->dma.data_map) {
1192 bus_dmamap_destroy(ch->dma.data_tag, slot->dma.data_map);
1193 slot->dma.data_map = NULL;
1199 ahci_phy_check_events(struct ahci_channel *ch, u_int32_t serr)
1202 if (((ch->pm_level == 0) && (serr & ATA_SE_PHY_CHANGED)) ||
1203 ((ch->pm_level != 0 || ch->listening) && (serr & ATA_SE_EXCHANGED))) {
1204 u_int32_t status = ATA_INL(ch->r_mem, AHCI_P_SSTS);
1208 if ((status & ATA_SS_DET_MASK) != ATA_SS_DET_NO_DEVICE)
1209 device_printf(ch->dev, "CONNECT requested\n");
1211 device_printf(ch->dev, "DISCONNECT requested\n");
1214 if ((ccb = xpt_alloc_ccb_nowait()) == NULL)
1216 if (xpt_create_path(&ccb->ccb_h.path, NULL,
1217 cam_sim_path(ch->sim),
1218 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
1229 ahci_cpd_check_events(struct ahci_channel *ch)
1235 if (ch->pm_level == 0)
1238 status = ATA_INL(ch->r_mem, AHCI_P_CMD);
1239 if ((status & AHCI_P_CMD_CPD) == 0)
1244 if (status & AHCI_P_CMD_CPS) {
1245 device_printf(dev, "COLD CONNECT requested\n");
1247 device_printf(dev, "COLD DISCONNECT requested\n");
1250 if ((ccb = xpt_alloc_ccb_nowait()) == NULL)
1252 if (xpt_create_path(&ccb->ccb_h.path, NULL, cam_sim_path(ch->sim),
1253 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
1261 ahci_notify_events(struct ahci_channel *ch, u_int32_t status)
1263 struct cam_path *dpath;
1266 if (ch->caps & AHCI_CAP_SSNTF)
1267 ATA_OUTL(ch->r_mem, AHCI_P_SNTF, status);
1269 device_printf(ch->dev, "SNTF 0x%04x\n", status);
1270 for (i = 0; i < 16; i++) {
1271 if ((status & (1 << i)) == 0)
1273 if (xpt_create_path(&dpath, NULL,
1274 xpt_path_path_id(ch->path), i, 0) == CAM_REQ_CMP) {
1275 xpt_async(AC_SCSI_AEN, dpath, NULL);
1276 xpt_free_path(dpath);
1282 ahci_done(struct ahci_channel *ch, union ccb *ccb)
1285 mtx_assert(&ch->mtx, MA_OWNED);
1286 if ((ccb->ccb_h.func_code & XPT_FC_QUEUED) == 0 ||
1292 STAILQ_INSERT_TAIL(&ch->doneq, &ccb->ccb_h, sim_links.stqe);
1296 ahci_ch_intr(void *arg)
1298 struct ahci_channel *ch = (struct ahci_channel *)arg;
1301 /* Read interrupt statuses. */
1302 istatus = ATA_INL(ch->r_mem, AHCI_P_IS);
1305 ahci_ch_intr_main(ch, istatus);
1306 mtx_unlock(&ch->mtx);
1310 ahci_ch_intr_direct(void *arg)
1312 struct ahci_channel *ch = (struct ahci_channel *)arg;
1313 struct ccb_hdr *ccb_h;
1315 STAILQ_HEAD(, ccb_hdr) tmp_doneq = STAILQ_HEAD_INITIALIZER(tmp_doneq);
1317 /* Read interrupt statuses. */
1318 istatus = ATA_INL(ch->r_mem, AHCI_P_IS);
1322 ahci_ch_intr_main(ch, istatus);
1325 * Prevent the possibility of issues caused by processing the queue
1326 * while unlocked below by moving the contents to a local queue.
1328 STAILQ_CONCAT(&tmp_doneq, &ch->doneq);
1329 mtx_unlock(&ch->mtx);
1330 while ((ccb_h = STAILQ_FIRST(&tmp_doneq)) != NULL) {
1331 STAILQ_REMOVE_HEAD(&tmp_doneq, sim_links.stqe);
1332 xpt_done_direct((union ccb *)ccb_h);
1337 ahci_ch_pm(void *arg)
1339 struct ahci_channel *ch = (struct ahci_channel *)arg;
1342 if (ch->numrslots != 0)
1344 work = ATA_INL(ch->r_mem, AHCI_P_CMD);
1345 if (ch->pm_level == 4)
1346 work |= AHCI_P_CMD_PARTIAL;
1348 work |= AHCI_P_CMD_SLUMBER;
1349 ATA_OUTL(ch->r_mem, AHCI_P_CMD, work);
1353 ahci_ch_intr_main(struct ahci_channel *ch, uint32_t istatus)
1355 uint32_t cstatus, serr = 0, sntf = 0, ok, err;
1356 enum ahci_err_type et;
1357 int i, ccs, port, reset = 0;
1359 /* Clear interrupt statuses. */
1360 ATA_OUTL(ch->r_mem, AHCI_P_IS, istatus);
1361 /* Read command statuses. */
1362 if (ch->numtslots != 0)
1363 cstatus = ATA_INL(ch->r_mem, AHCI_P_SACT);
1366 if (ch->numrslots != ch->numtslots)
1367 cstatus |= ATA_INL(ch->r_mem, AHCI_P_CI);
1368 /* Read SNTF in one of possible ways. */
1369 if ((istatus & AHCI_P_IX_SDB) &&
1370 (ch->pm_present || ch->curr[0].atapi != 0)) {
1371 if (ch->caps & AHCI_CAP_SSNTF)
1372 sntf = ATA_INL(ch->r_mem, AHCI_P_SNTF);
1373 else if (ch->fbs_enabled) {
1374 u_int8_t *fis = ch->dma.rfis + 0x58;
1376 for (i = 0; i < 16; i++) {
1377 if (fis[1] & 0x80) {
1384 u_int8_t *fis = ch->dma.rfis + 0x58;
1387 sntf = (1 << (fis[1] & 0x0f));
1390 /* Process PHY events */
1391 if (istatus & (AHCI_P_IX_PC | AHCI_P_IX_PRC | AHCI_P_IX_OF |
1392 AHCI_P_IX_IF | AHCI_P_IX_HBD | AHCI_P_IX_HBF | AHCI_P_IX_TFE)) {
1393 serr = ATA_INL(ch->r_mem, AHCI_P_SERR);
1395 ATA_OUTL(ch->r_mem, AHCI_P_SERR, serr);
1396 reset = ahci_phy_check_events(ch, serr);
1399 /* Process cold presence detection events */
1400 if ((istatus & AHCI_P_IX_CPD) && !reset)
1401 ahci_cpd_check_events(ch);
1402 /* Process command errors */
1403 if (istatus & (AHCI_P_IX_OF | AHCI_P_IX_IF |
1404 AHCI_P_IX_HBD | AHCI_P_IX_HBF | AHCI_P_IX_TFE)) {
1405 if (ch->quirks & AHCI_Q_NOCCS) {
1407 * ASMedia chips sometimes report failed commands as
1408 * completed. Count all running commands as failed.
1410 cstatus |= ch->rslots;
1412 /* They also report wrong CCS, so try to guess one. */
1413 ccs = powerof2(cstatus) ? ffs(cstatus) - 1 : -1;
1415 ccs = (ATA_INL(ch->r_mem, AHCI_P_CMD) &
1416 AHCI_P_CMD_CCS_MASK) >> AHCI_P_CMD_CCS_SHIFT;
1418 //device_printf(dev, "%s ERROR is %08x cs %08x ss %08x rs %08x tfd %02x serr %08x fbs %08x ccs %d\n",
1419 // __func__, istatus, cstatus, sstatus, ch->rslots, ATA_INL(ch->r_mem, AHCI_P_TFD),
1420 // serr, ATA_INL(ch->r_mem, AHCI_P_FBS), ccs);
1422 if (ch->fbs_enabled) {
1423 uint32_t fbs = ATA_INL(ch->r_mem, AHCI_P_FBS);
1424 if (fbs & AHCI_P_FBS_SDE) {
1425 port = (fbs & AHCI_P_FBS_DWE)
1426 >> AHCI_P_FBS_DWE_SHIFT;
1428 for (i = 0; i < 16; i++) {
1429 if (ch->numrslotspd[i] == 0)
1433 else if (port != i) {
1440 err = ch->rslots & cstatus;
1446 /* Complete all successful commands. */
1447 ok = ch->rslots & ~cstatus;
1448 for (i = 0; i < ch->numslots; i++) {
1450 ahci_end_transaction(&ch->slot[i], AHCI_ERR_NONE);
1452 /* On error, complete the rest of commands with error statuses. */
1455 union ccb *fccb = ch->frozen;
1457 fccb->ccb_h.status = CAM_REQUEUE_REQ | CAM_RELEASE_SIMQ;
1458 if (!(fccb->ccb_h.status & CAM_DEV_QFRZN)) {
1459 xpt_freeze_devq(fccb->ccb_h.path, 1);
1460 fccb->ccb_h.status |= CAM_DEV_QFRZN;
1462 ahci_done(ch, fccb);
1464 for (i = 0; i < ch->numslots; i++) {
1465 /* XXX: reqests in loading state. */
1466 if (((err >> i) & 1) == 0)
1469 ch->slot[i].ccb->ccb_h.target_id != port)
1471 if (istatus & AHCI_P_IX_TFE) {
1473 /* Task File Error */
1474 if (ch->numtslotspd[
1475 ch->slot[i].ccb->ccb_h.target_id] == 0) {
1476 /* Untagged operation. */
1480 et = AHCI_ERR_INNOCENT;
1482 /* Tagged operation. */
1489 } else if (istatus & AHCI_P_IX_IF) {
1490 if (ch->numtslots == 0 && i != ccs && port != -2)
1491 et = AHCI_ERR_INNOCENT;
1495 et = AHCI_ERR_INVALID;
1496 ahci_end_transaction(&ch->slot[i], et);
1499 * We can't reinit port if there are some other
1500 * commands active, use resume to complete them.
1502 if (ch->rslots != 0 && !ch->recoverycmd)
1503 ATA_OUTL(ch->r_mem, AHCI_P_FBS, AHCI_P_FBS_EN | AHCI_P_FBS_DEC);
1505 /* Process NOTIFY events */
1507 ahci_notify_events(ch, sntf);
1510 /* Must be called with channel locked. */
1512 ahci_check_collision(struct ahci_channel *ch, union ccb *ccb)
1514 int t = ccb->ccb_h.target_id;
1516 if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
1517 (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) {
1518 /* Tagged command while we have no supported tag free. */
1519 if (((~ch->oslots) & (0xffffffff >> (32 -
1520 ch->curr[t].tags))) == 0)
1522 /* If we have FBS */
1523 if (ch->fbs_enabled) {
1524 /* Tagged command while untagged are active. */
1525 if (ch->numrslotspd[t] != 0 && ch->numtslotspd[t] == 0)
1528 /* Tagged command while untagged are active. */
1529 if (ch->numrslots != 0 && ch->numtslots == 0)
1531 /* Tagged command while tagged to other target is active. */
1532 if (ch->numtslots != 0 &&
1533 ch->taggedtarget != ccb->ccb_h.target_id)
1537 /* If we have FBS */
1538 if (ch->fbs_enabled) {
1539 /* Untagged command while tagged are active. */
1540 if (ch->numrslotspd[t] != 0 && ch->numtslotspd[t] != 0)
1543 /* Untagged command while tagged are active. */
1544 if (ch->numrslots != 0 && ch->numtslots != 0)
1548 if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
1549 (ccb->ataio.cmd.flags & (CAM_ATAIO_CONTROL | CAM_ATAIO_NEEDRESULT))) {
1550 /* Atomic command while anything active. */
1551 if (ch->numrslots != 0)
1554 /* We have some atomic command running. */
1555 if (ch->aslots != 0)
1560 /* Must be called with channel locked. */
1562 ahci_begin_transaction(struct ahci_channel *ch, union ccb *ccb)
1564 struct ahci_slot *slot;
1567 /* Choose empty slot. */
1568 tags = ch->numslots;
1569 if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
1570 (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA))
1571 tags = ch->curr[ccb->ccb_h.target_id].tags;
1572 if (ch->lastslot + 1 < tags)
1573 tag = ffs(~(ch->oslots >> (ch->lastslot + 1)));
1576 if (tag == 0 || tag + ch->lastslot >= tags)
1577 tag = ffs(~ch->oslots) - 1;
1579 tag += ch->lastslot;
1581 /* Occupy chosen slot. */
1582 slot = &ch->slot[tag];
1584 /* Stop PM timer. */
1585 if (ch->numrslots == 0 && ch->pm_level > 3)
1586 callout_stop(&ch->pm_timer);
1587 /* Update channel stats. */
1588 ch->oslots |= (1 << tag);
1590 ch->numrslotspd[ccb->ccb_h.target_id]++;
1591 if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
1592 (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) {
1594 ch->numtslotspd[ccb->ccb_h.target_id]++;
1595 ch->taggedtarget = ccb->ccb_h.target_id;
1597 if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
1598 (ccb->ataio.cmd.flags & (CAM_ATAIO_CONTROL | CAM_ATAIO_NEEDRESULT)))
1599 ch->aslots |= (1 << tag);
1600 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
1601 slot->state = AHCI_SLOT_LOADING;
1602 bus_dmamap_load_ccb(ch->dma.data_tag, slot->dma.data_map, ccb,
1603 ahci_dmasetprd, slot, 0);
1605 slot->dma.nsegs = 0;
1606 ahci_execute_transaction(slot);
1610 /* Locked by busdma engine. */
1612 ahci_dmasetprd(void *arg, bus_dma_segment_t *segs, int nsegs, int error)
1614 struct ahci_slot *slot = arg;
1615 struct ahci_channel *ch = slot->ch;
1616 struct ahci_cmd_tab *ctp;
1617 struct ahci_dma_prd *prd;
1621 device_printf(ch->dev, "DMA load error\n");
1622 ahci_end_transaction(slot, AHCI_ERR_INVALID);
1625 KASSERT(nsegs <= AHCI_SG_ENTRIES, ("too many DMA segment entries\n"));
1626 /* Get a piece of the workspace for this request */
1627 ctp = (struct ahci_cmd_tab *)
1628 (ch->dma.work + AHCI_CT_OFFSET + (AHCI_CT_SIZE * slot->slot));
1629 /* Fill S/G table */
1630 prd = &ctp->prd_tab[0];
1631 for (i = 0; i < nsegs; i++) {
1632 prd[i].dba = htole64(segs[i].ds_addr);
1633 prd[i].dbc = htole32((segs[i].ds_len - 1) & AHCI_PRD_MASK);
1635 slot->dma.nsegs = nsegs;
1636 bus_dmamap_sync(ch->dma.data_tag, slot->dma.data_map,
1637 ((slot->ccb->ccb_h.flags & CAM_DIR_IN) ?
1638 BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE));
1639 ahci_execute_transaction(slot);
1642 /* Must be called with channel locked. */
1644 ahci_execute_transaction(struct ahci_slot *slot)
1646 struct ahci_channel *ch = slot->ch;
1647 struct ahci_cmd_tab *ctp;
1648 struct ahci_cmd_list *clp;
1649 union ccb *ccb = slot->ccb;
1650 int port = ccb->ccb_h.target_id & 0x0f;
1651 int fis_size, i, softreset;
1652 uint8_t *fis = ch->dma.rfis + 0x40;
1656 /* Get a piece of the workspace for this request */
1657 ctp = (struct ahci_cmd_tab *)
1658 (ch->dma.work + AHCI_CT_OFFSET + (AHCI_CT_SIZE * slot->slot));
1659 /* Setup the FIS for this request */
1660 if (!(fis_size = ahci_setup_fis(ch, ctp, ccb, slot->slot))) {
1661 device_printf(ch->dev, "Setting up SATA FIS failed\n");
1662 ahci_end_transaction(slot, AHCI_ERR_INVALID);
1665 /* Setup the command list entry */
1666 clp = (struct ahci_cmd_list *)
1667 (ch->dma.work + AHCI_CL_OFFSET + (AHCI_CL_SIZE * slot->slot));
1669 (ccb->ccb_h.flags & CAM_DIR_OUT ? AHCI_CMD_WRITE : 0) |
1670 (ccb->ccb_h.func_code == XPT_SCSI_IO ?
1671 (AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH) : 0) |
1672 (fis_size / sizeof(u_int32_t)) |
1674 clp->prd_length = htole16(slot->dma.nsegs);
1675 /* Special handling for Soft Reset command. */
1676 if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
1677 (ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL)) {
1678 if (ccb->ataio.cmd.control & ATA_A_RESET) {
1680 /* Kick controller into sane state */
1684 cmd_flags |= AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY;
1687 /* Prepare FIS receive area for check. */
1688 for (i = 0; i < 20; i++)
1694 clp->cmd_flags = htole16(cmd_flags);
1695 clp->cmd_table_phys = htole64(ch->dma.work_bus + AHCI_CT_OFFSET +
1696 (AHCI_CT_SIZE * slot->slot));
1697 bus_dmamap_sync(ch->dma.work_tag, ch->dma.work_map,
1698 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
1699 bus_dmamap_sync(ch->dma.rfis_tag, ch->dma.rfis_map,
1700 BUS_DMASYNC_PREREAD);
1701 /* Set ACTIVE bit for NCQ commands. */
1702 if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
1703 (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) {
1704 ATA_OUTL(ch->r_mem, AHCI_P_SACT, 1 << slot->slot);
1706 /* If FBS is enabled, set PMP port. */
1707 if (ch->fbs_enabled) {
1708 ATA_OUTL(ch->r_mem, AHCI_P_FBS, AHCI_P_FBS_EN |
1709 (port << AHCI_P_FBS_DEV_SHIFT));
1711 /* Issue command to the controller. */
1712 slot->state = AHCI_SLOT_RUNNING;
1713 ch->rslots |= (1 << slot->slot);
1714 ATA_OUTL(ch->r_mem, AHCI_P_CI, (1 << slot->slot));
1715 /* Device reset commands doesn't interrupt. Poll them. */
1716 if (ccb->ccb_h.func_code == XPT_ATA_IO &&
1717 (ccb->ataio.cmd.command == ATA_DEVICE_RESET || softreset)) {
1718 int count, timeout = ccb->ccb_h.timeout * 100;
1719 enum ahci_err_type et = AHCI_ERR_NONE;
1721 for (count = 0; count < timeout; count++) {
1723 if (!(ATA_INL(ch->r_mem, AHCI_P_CI) & (1 << slot->slot)))
1725 if ((ATA_INL(ch->r_mem, AHCI_P_TFD) & ATA_S_ERROR) &&
1728 device_printf(ch->dev,
1729 "Poll error on slot %d, TFD: %04x\n",
1730 slot->slot, ATA_INL(ch->r_mem, AHCI_P_TFD));
1735 /* Workaround for ATI SB600/SB700 chipsets. */
1736 if (ccb->ccb_h.target_id == 15 &&
1737 (ch->quirks & AHCI_Q_ATI_PMP_BUG) &&
1738 (ATA_INL(ch->r_mem, AHCI_P_IS) & AHCI_P_IX_IPM)) {
1739 et = AHCI_ERR_TIMEOUT;
1745 * Some Marvell controllers require additional time
1746 * after soft reset to work properly. Setup delay
1747 * to 50ms after soft reset.
1749 if (ch->quirks & AHCI_Q_MRVL_SR_DEL)
1753 * Marvell HBAs with non-RAID firmware do not wait for
1754 * readiness after soft reset, so we have to wait here.
1755 * Marvell RAIDs do not have this problem, but instead
1756 * sometimes forget to update FIS receive area, breaking
1759 if ((ch->quirks & AHCI_Q_NOBSYRES) == 0 &&
1760 (ch->quirks & AHCI_Q_ATI_PMP_BUG) == 0 &&
1761 softreset == 2 && et == AHCI_ERR_NONE) {
1762 for ( ; count < timeout; count++) {
1763 bus_dmamap_sync(ch->dma.rfis_tag,
1764 ch->dma.rfis_map, BUS_DMASYNC_POSTREAD);
1766 bus_dmamap_sync(ch->dma.rfis_tag,
1767 ch->dma.rfis_map, BUS_DMASYNC_PREREAD);
1768 if ((val & ATA_S_BUSY) == 0)
1774 if (timeout && (count >= timeout)) {
1775 device_printf(ch->dev, "Poll timeout on slot %d port %d\n",
1777 device_printf(ch->dev, "is %08x cs %08x ss %08x "
1778 "rs %08x tfd %02x serr %08x cmd %08x\n",
1779 ATA_INL(ch->r_mem, AHCI_P_IS),
1780 ATA_INL(ch->r_mem, AHCI_P_CI),
1781 ATA_INL(ch->r_mem, AHCI_P_SACT), ch->rslots,
1782 ATA_INL(ch->r_mem, AHCI_P_TFD),
1783 ATA_INL(ch->r_mem, AHCI_P_SERR),
1784 ATA_INL(ch->r_mem, AHCI_P_CMD));
1785 et = AHCI_ERR_TIMEOUT;
1788 /* Kick controller into sane state and enable FBS. */
1790 ch->eslots |= (1 << slot->slot);
1791 ahci_end_transaction(slot, et);
1794 /* Start command execution timeout */
1795 callout_reset_sbt(&slot->timeout, SBT_1MS * ccb->ccb_h.timeout / 2,
1796 0, (timeout_t*)ahci_timeout, slot, 0);
1800 /* Must be called with channel locked. */
1802 ahci_process_timeout(struct ahci_channel *ch)
1806 mtx_assert(&ch->mtx, MA_OWNED);
1807 /* Handle the rest of commands. */
1808 for (i = 0; i < ch->numslots; i++) {
1809 /* Do we have a running request on slot? */
1810 if (ch->slot[i].state < AHCI_SLOT_RUNNING)
1812 ahci_end_transaction(&ch->slot[i], AHCI_ERR_TIMEOUT);
1816 /* Must be called with channel locked. */
1818 ahci_rearm_timeout(struct ahci_channel *ch)
1822 mtx_assert(&ch->mtx, MA_OWNED);
1823 for (i = 0; i < ch->numslots; i++) {
1824 struct ahci_slot *slot = &ch->slot[i];
1826 /* Do we have a running request on slot? */
1827 if (slot->state < AHCI_SLOT_RUNNING)
1829 if ((ch->toslots & (1 << i)) == 0)
1831 callout_reset_sbt(&slot->timeout,
1832 SBT_1MS * slot->ccb->ccb_h.timeout / 2, 0,
1833 (timeout_t*)ahci_timeout, slot, 0);
1837 /* Locked by callout mechanism. */
1839 ahci_timeout(struct ahci_slot *slot)
1841 struct ahci_channel *ch = slot->ch;
1842 device_t dev = ch->dev;
1847 /* Check for stale timeout. */
1848 if (slot->state < AHCI_SLOT_RUNNING)
1851 /* Check if slot was not being executed last time we checked. */
1852 if (slot->state < AHCI_SLOT_EXECUTING) {
1853 /* Check if slot started executing. */
1854 sstatus = ATA_INL(ch->r_mem, AHCI_P_SACT);
1855 ccs = (ATA_INL(ch->r_mem, AHCI_P_CMD) & AHCI_P_CMD_CCS_MASK)
1856 >> AHCI_P_CMD_CCS_SHIFT;
1857 if ((sstatus & (1 << slot->slot)) != 0 || ccs == slot->slot ||
1858 ch->fbs_enabled || ch->wrongccs)
1859 slot->state = AHCI_SLOT_EXECUTING;
1860 else if ((ch->rslots & (1 << ccs)) == 0) {
1862 slot->state = AHCI_SLOT_EXECUTING;
1865 callout_reset_sbt(&slot->timeout,
1866 SBT_1MS * slot->ccb->ccb_h.timeout / 2, 0,
1867 (timeout_t*)ahci_timeout, slot, 0);
1871 device_printf(dev, "Timeout on slot %d port %d\n",
1872 slot->slot, slot->ccb->ccb_h.target_id & 0x0f);
1873 device_printf(dev, "is %08x cs %08x ss %08x rs %08x tfd %02x "
1874 "serr %08x cmd %08x\n",
1875 ATA_INL(ch->r_mem, AHCI_P_IS), ATA_INL(ch->r_mem, AHCI_P_CI),
1876 ATA_INL(ch->r_mem, AHCI_P_SACT), ch->rslots,
1877 ATA_INL(ch->r_mem, AHCI_P_TFD), ATA_INL(ch->r_mem, AHCI_P_SERR),
1878 ATA_INL(ch->r_mem, AHCI_P_CMD));
1880 /* Handle frozen command. */
1882 union ccb *fccb = ch->frozen;
1884 fccb->ccb_h.status = CAM_REQUEUE_REQ | CAM_RELEASE_SIMQ;
1885 if (!(fccb->ccb_h.status & CAM_DEV_QFRZN)) {
1886 xpt_freeze_devq(fccb->ccb_h.path, 1);
1887 fccb->ccb_h.status |= CAM_DEV_QFRZN;
1889 ahci_done(ch, fccb);
1891 if (!ch->fbs_enabled && !ch->wrongccs) {
1892 /* Without FBS we know real timeout source. */
1894 /* Handle command with timeout. */
1895 ahci_end_transaction(&ch->slot[slot->slot], AHCI_ERR_TIMEOUT);
1896 /* Handle the rest of commands. */
1897 for (i = 0; i < ch->numslots; i++) {
1898 /* Do we have a running request on slot? */
1899 if (ch->slot[i].state < AHCI_SLOT_RUNNING)
1901 ahci_end_transaction(&ch->slot[i], AHCI_ERR_INNOCENT);
1904 /* With FBS we wait for other commands timeout and pray. */
1905 if (ch->toslots == 0)
1906 xpt_freeze_simq(ch->sim, 1);
1907 ch->toslots |= (1 << slot->slot);
1908 if ((ch->rslots & ~ch->toslots) == 0)
1909 ahci_process_timeout(ch);
1911 device_printf(dev, " ... waiting for slots %08x\n",
1912 ch->rslots & ~ch->toslots);
1916 /* Must be called with channel locked. */
1918 ahci_end_transaction(struct ahci_slot *slot, enum ahci_err_type et)
1920 struct ahci_channel *ch = slot->ch;
1921 union ccb *ccb = slot->ccb;
1922 struct ahci_cmd_list *clp;
1926 bus_dmamap_sync(ch->dma.work_tag, ch->dma.work_map,
1927 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
1928 clp = (struct ahci_cmd_list *)
1929 (ch->dma.work + AHCI_CL_OFFSET + (AHCI_CL_SIZE * slot->slot));
1930 /* Read result registers to the result struct
1931 * May be incorrect if several commands finished same time,
1932 * so read only when sure or have to.
1934 if (ccb->ccb_h.func_code == XPT_ATA_IO) {
1935 struct ata_res *res = &ccb->ataio.res;
1937 if ((et == AHCI_ERR_TFE) ||
1938 (ccb->ataio.cmd.flags & CAM_ATAIO_NEEDRESULT)) {
1939 u_int8_t *fis = ch->dma.rfis + 0x40;
1941 bus_dmamap_sync(ch->dma.rfis_tag, ch->dma.rfis_map,
1942 BUS_DMASYNC_POSTREAD);
1943 if (ch->fbs_enabled) {
1944 fis += ccb->ccb_h.target_id * 256;
1945 res->status = fis[2];
1946 res->error = fis[3];
1948 uint16_t tfd = ATA_INL(ch->r_mem, AHCI_P_TFD);
1951 res->error = tfd >> 8;
1953 res->lba_low = fis[4];
1954 res->lba_mid = fis[5];
1955 res->lba_high = fis[6];
1956 res->device = fis[7];
1957 res->lba_low_exp = fis[8];
1958 res->lba_mid_exp = fis[9];
1959 res->lba_high_exp = fis[10];
1960 res->sector_count = fis[12];
1961 res->sector_count_exp = fis[13];
1964 * Some weird controllers do not return signature in
1965 * FIS receive area. Read it from PxSIG register.
1967 if ((ch->quirks & AHCI_Q_ALTSIG) &&
1968 (ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL) &&
1969 (ccb->ataio.cmd.control & ATA_A_RESET) == 0) {
1970 sig = ATA_INL(ch->r_mem, AHCI_P_SIG);
1971 res->lba_high = sig >> 24;
1972 res->lba_mid = sig >> 16;
1973 res->lba_low = sig >> 8;
1974 res->sector_count = sig;
1977 bzero(res, sizeof(*res));
1978 if ((ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA) == 0 &&
1979 (ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE &&
1980 (ch->quirks & AHCI_Q_NOCOUNT) == 0) {
1982 ccb->ataio.dxfer_len - le32toh(clp->bytecount);
1985 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE &&
1986 (ch->quirks & AHCI_Q_NOCOUNT) == 0) {
1988 ccb->csio.dxfer_len - le32toh(clp->bytecount);
1991 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
1992 bus_dmamap_sync(ch->dma.data_tag, slot->dma.data_map,
1993 (ccb->ccb_h.flags & CAM_DIR_IN) ?
1994 BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
1995 bus_dmamap_unload(ch->dma.data_tag, slot->dma.data_map);
1997 if (et != AHCI_ERR_NONE)
1998 ch->eslots |= (1 << slot->slot);
1999 /* In case of error, freeze device for proper recovery. */
2000 if ((et != AHCI_ERR_NONE) && (!ch->recoverycmd) &&
2001 !(ccb->ccb_h.status & CAM_DEV_QFRZN)) {
2002 xpt_freeze_devq(ccb->ccb_h.path, 1);
2003 ccb->ccb_h.status |= CAM_DEV_QFRZN;
2005 /* Set proper result status. */
2006 ccb->ccb_h.status &= ~CAM_STATUS_MASK;
2009 ccb->ccb_h.status |= CAM_REQ_CMP;
2010 if (ccb->ccb_h.func_code == XPT_SCSI_IO)
2011 ccb->csio.scsi_status = SCSI_STATUS_OK;
2013 case AHCI_ERR_INVALID:
2015 ccb->ccb_h.status |= CAM_REQ_INVALID;
2017 case AHCI_ERR_INNOCENT:
2018 ccb->ccb_h.status |= CAM_REQUEUE_REQ;
2022 if (ccb->ccb_h.func_code == XPT_SCSI_IO) {
2023 ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR;
2024 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND;
2026 ccb->ccb_h.status |= CAM_ATA_STATUS_ERROR;
2031 if (!ch->recoverycmd) {
2032 xpt_freeze_simq(ch->sim, 1);
2033 ccb->ccb_h.status &= ~CAM_STATUS_MASK;
2034 ccb->ccb_h.status |= CAM_RELEASE_SIMQ;
2036 ccb->ccb_h.status |= CAM_UNCOR_PARITY;
2038 case AHCI_ERR_TIMEOUT:
2039 if (!ch->recoverycmd) {
2040 xpt_freeze_simq(ch->sim, 1);
2041 ccb->ccb_h.status &= ~CAM_STATUS_MASK;
2042 ccb->ccb_h.status |= CAM_RELEASE_SIMQ;
2044 ccb->ccb_h.status |= CAM_CMD_TIMEOUT;
2048 ccb->ccb_h.status |= CAM_REQ_CMP_ERR;
2051 ch->oslots &= ~(1 << slot->slot);
2052 ch->rslots &= ~(1 << slot->slot);
2053 ch->aslots &= ~(1 << slot->slot);
2054 slot->state = AHCI_SLOT_EMPTY;
2056 /* Update channel stats. */
2058 ch->numrslotspd[ccb->ccb_h.target_id]--;
2059 if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
2060 (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) {
2062 ch->numtslotspd[ccb->ccb_h.target_id]--;
2064 /* Cancel timeout state if request completed normally. */
2065 if (et != AHCI_ERR_TIMEOUT) {
2066 lastto = (ch->toslots == (1 << slot->slot));
2067 ch->toslots &= ~(1 << slot->slot);
2069 xpt_release_simq(ch->sim, TRUE);
2071 /* If it was first request of reset sequence and there is no error,
2072 * proceed to second request. */
2073 if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
2074 (ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL) &&
2075 (ccb->ataio.cmd.control & ATA_A_RESET) &&
2076 et == AHCI_ERR_NONE) {
2077 ccb->ataio.cmd.control &= ~ATA_A_RESET;
2078 ahci_begin_transaction(ch, ccb);
2081 /* If it was our READ LOG command - process it. */
2082 if (ccb->ccb_h.recovery_type == RECOVERY_READ_LOG) {
2083 ahci_process_read_log(ch, ccb);
2084 /* If it was our REQUEST SENSE command - process it. */
2085 } else if (ccb->ccb_h.recovery_type == RECOVERY_REQUEST_SENSE) {
2086 ahci_process_request_sense(ch, ccb);
2087 /* If it was NCQ or ATAPI command error, put result on hold. */
2088 } else if (et == AHCI_ERR_NCQ ||
2089 ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_SCSI_STATUS_ERROR &&
2090 (ccb->ccb_h.flags & CAM_DIS_AUTOSENSE) == 0)) {
2091 ch->hold[slot->slot] = ccb;
2095 /* If we have no other active commands, ... */
2096 if (ch->rslots == 0) {
2097 /* if there was fatal error - reset port. */
2098 if (ch->toslots != 0 || ch->fatalerr) {
2101 /* if we have slots in error, we can reinit port. */
2102 if (ch->eslots != 0) {
2107 /* if there commands on hold, we can do READ LOG. */
2108 if (!ch->recoverycmd && ch->numhslots)
2109 ahci_issue_recovery(ch);
2111 /* If all the rest of commands are in timeout - give them chance. */
2112 } else if ((ch->rslots & ~ch->toslots) == 0 &&
2113 et != AHCI_ERR_TIMEOUT)
2114 ahci_rearm_timeout(ch);
2115 /* Unfreeze frozen command. */
2116 if (ch->frozen && !ahci_check_collision(ch, ch->frozen)) {
2117 union ccb *fccb = ch->frozen;
2119 ahci_begin_transaction(ch, fccb);
2120 xpt_release_simq(ch->sim, TRUE);
2122 /* Start PM timer. */
2123 if (ch->numrslots == 0 && ch->pm_level > 3 &&
2124 (ch->curr[ch->pm_present ? 15 : 0].caps & CTS_SATA_CAPS_D_PMREQ)) {
2125 callout_schedule(&ch->pm_timer,
2126 (ch->pm_level == 4) ? hz / 1000 : hz / 8);
2131 ahci_issue_recovery(struct ahci_channel *ch)
2134 struct ccb_ataio *ataio;
2135 struct ccb_scsiio *csio;
2138 /* Find some held command. */
2139 for (i = 0; i < ch->numslots; i++) {
2143 ccb = xpt_alloc_ccb_nowait();
2145 device_printf(ch->dev, "Unable to allocate recovery command\n");
2147 /* We can't do anything -- complete held commands. */
2148 for (i = 0; i < ch->numslots; i++) {
2149 if (ch->hold[i] == NULL)
2151 ch->hold[i]->ccb_h.status &= ~CAM_STATUS_MASK;
2152 ch->hold[i]->ccb_h.status |= CAM_RESRC_UNAVAIL;
2153 ahci_done(ch, ch->hold[i]);
2160 ccb->ccb_h = ch->hold[i]->ccb_h; /* Reuse old header. */
2161 if (ccb->ccb_h.func_code == XPT_ATA_IO) {
2163 ccb->ccb_h.recovery_type = RECOVERY_READ_LOG;
2164 ccb->ccb_h.func_code = XPT_ATA_IO;
2165 ccb->ccb_h.flags = CAM_DIR_IN;
2166 ccb->ccb_h.timeout = 1000; /* 1s should be enough. */
2167 ataio = &ccb->ataio;
2168 ataio->data_ptr = malloc(512, M_AHCI, M_NOWAIT);
2169 if (ataio->data_ptr == NULL) {
2171 device_printf(ch->dev,
2172 "Unable to allocate memory for READ LOG command\n");
2175 ataio->dxfer_len = 512;
2176 bzero(&ataio->cmd, sizeof(ataio->cmd));
2177 ataio->cmd.flags = CAM_ATAIO_48BIT;
2178 ataio->cmd.command = 0x2F; /* READ LOG EXT */
2179 ataio->cmd.sector_count = 1;
2180 ataio->cmd.sector_count_exp = 0;
2181 ataio->cmd.lba_low = 0x10;
2182 ataio->cmd.lba_mid = 0;
2183 ataio->cmd.lba_mid_exp = 0;
2186 ccb->ccb_h.recovery_type = RECOVERY_REQUEST_SENSE;
2187 ccb->ccb_h.recovery_slot = i;
2188 ccb->ccb_h.func_code = XPT_SCSI_IO;
2189 ccb->ccb_h.flags = CAM_DIR_IN;
2190 ccb->ccb_h.status = 0;
2191 ccb->ccb_h.timeout = 1000; /* 1s should be enough. */
2193 csio->data_ptr = (void *)&ch->hold[i]->csio.sense_data;
2194 csio->dxfer_len = ch->hold[i]->csio.sense_len;
2196 bzero(&csio->cdb_io, sizeof(csio->cdb_io));
2197 csio->cdb_io.cdb_bytes[0] = 0x03;
2198 csio->cdb_io.cdb_bytes[4] = csio->dxfer_len;
2200 /* Freeze SIM while doing recovery. */
2201 ch->recoverycmd = 1;
2202 xpt_freeze_simq(ch->sim, 1);
2203 ahci_begin_transaction(ch, ccb);
2207 ahci_process_read_log(struct ahci_channel *ch, union ccb *ccb)
2210 struct ata_res *res;
2213 ch->recoverycmd = 0;
2215 data = ccb->ataio.data_ptr;
2216 if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP &&
2217 (data[0] & 0x80) == 0) {
2218 for (i = 0; i < ch->numslots; i++) {
2221 if (ch->hold[i]->ccb_h.func_code != XPT_ATA_IO)
2223 if ((data[0] & 0x1F) == i) {
2224 res = &ch->hold[i]->ataio.res;
2225 res->status = data[2];
2226 res->error = data[3];
2227 res->lba_low = data[4];
2228 res->lba_mid = data[5];
2229 res->lba_high = data[6];
2230 res->device = data[7];
2231 res->lba_low_exp = data[8];
2232 res->lba_mid_exp = data[9];
2233 res->lba_high_exp = data[10];
2234 res->sector_count = data[12];
2235 res->sector_count_exp = data[13];
2237 ch->hold[i]->ccb_h.status &= ~CAM_STATUS_MASK;
2238 ch->hold[i]->ccb_h.status |= CAM_REQUEUE_REQ;
2240 ahci_done(ch, ch->hold[i]);
2245 if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP)
2246 device_printf(ch->dev, "Error while READ LOG EXT\n");
2247 else if ((data[0] & 0x80) == 0) {
2248 device_printf(ch->dev, "Non-queued command error in READ LOG EXT\n");
2250 for (i = 0; i < ch->numslots; i++) {
2253 if (ch->hold[i]->ccb_h.func_code != XPT_ATA_IO)
2255 ahci_done(ch, ch->hold[i]);
2260 free(ccb->ataio.data_ptr, M_AHCI);
2262 xpt_release_simq(ch->sim, TRUE);
2266 ahci_process_request_sense(struct ahci_channel *ch, union ccb *ccb)
2270 ch->recoverycmd = 0;
2272 i = ccb->ccb_h.recovery_slot;
2273 if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) {
2274 ch->hold[i]->ccb_h.status |= CAM_AUTOSNS_VALID;
2276 ch->hold[i]->ccb_h.status &= ~CAM_STATUS_MASK;
2277 ch->hold[i]->ccb_h.status |= CAM_AUTOSENSE_FAIL;
2279 ahci_done(ch, ch->hold[i]);
2283 xpt_release_simq(ch->sim, TRUE);
2287 ahci_start(struct ahci_channel *ch, int fbs)
2291 /* Run the channel start callback, if any. */
2295 /* Clear SATA error register */
2296 ATA_OUTL(ch->r_mem, AHCI_P_SERR, 0xFFFFFFFF);
2297 /* Clear any interrupts pending on this channel */
2298 ATA_OUTL(ch->r_mem, AHCI_P_IS, 0xFFFFFFFF);
2299 /* Configure FIS-based switching if supported. */
2300 if (ch->chcaps & AHCI_P_CMD_FBSCP) {
2301 ch->fbs_enabled = (fbs && ch->pm_present) ? 1 : 0;
2302 ATA_OUTL(ch->r_mem, AHCI_P_FBS,
2303 ch->fbs_enabled ? AHCI_P_FBS_EN : 0);
2305 /* Start operations on this channel */
2306 cmd = ATA_INL(ch->r_mem, AHCI_P_CMD);
2307 cmd &= ~AHCI_P_CMD_PMA;
2308 ATA_OUTL(ch->r_mem, AHCI_P_CMD, cmd | AHCI_P_CMD_ST |
2309 (ch->pm_present ? AHCI_P_CMD_PMA : 0));
2313 ahci_stop(struct ahci_channel *ch)
2318 /* Kill all activity on this channel */
2319 cmd = ATA_INL(ch->r_mem, AHCI_P_CMD);
2320 ATA_OUTL(ch->r_mem, AHCI_P_CMD, cmd & ~AHCI_P_CMD_ST);
2321 /* Wait for activity stop. */
2325 if (timeout++ > 50000) {
2326 device_printf(ch->dev, "stopping AHCI engine failed\n");
2329 } while (ATA_INL(ch->r_mem, AHCI_P_CMD) & AHCI_P_CMD_CR);
2334 ahci_clo(struct ahci_channel *ch)
2339 /* Issue Command List Override if supported */
2340 if (ch->caps & AHCI_CAP_SCLO) {
2341 cmd = ATA_INL(ch->r_mem, AHCI_P_CMD);
2342 cmd |= AHCI_P_CMD_CLO;
2343 ATA_OUTL(ch->r_mem, AHCI_P_CMD, cmd);
2347 if (timeout++ > 50000) {
2348 device_printf(ch->dev, "executing CLO failed\n");
2351 } while (ATA_INL(ch->r_mem, AHCI_P_CMD) & AHCI_P_CMD_CLO);
2356 ahci_stop_fr(struct ahci_channel *ch)
2361 /* Kill all FIS reception on this channel */
2362 cmd = ATA_INL(ch->r_mem, AHCI_P_CMD);
2363 ATA_OUTL(ch->r_mem, AHCI_P_CMD, cmd & ~AHCI_P_CMD_FRE);
2364 /* Wait for FIS reception stop. */
2368 if (timeout++ > 50000) {
2369 device_printf(ch->dev, "stopping AHCI FR engine failed\n");
2372 } while (ATA_INL(ch->r_mem, AHCI_P_CMD) & AHCI_P_CMD_FR);
2376 ahci_start_fr(struct ahci_channel *ch)
2380 /* Start FIS reception on this channel */
2381 cmd = ATA_INL(ch->r_mem, AHCI_P_CMD);
2382 ATA_OUTL(ch->r_mem, AHCI_P_CMD, cmd | AHCI_P_CMD_FRE);
2386 ahci_wait_ready(struct ahci_channel *ch, int t, int t0)
2391 while ((val = ATA_INL(ch->r_mem, AHCI_P_TFD)) &
2392 (ATA_S_BUSY | ATA_S_DRQ)) {
2395 device_printf(ch->dev,
2396 "AHCI reset: device not ready after %dms "
2398 MAX(t, 0) + t0, val);
2406 device_printf(ch->dev, "AHCI reset: device ready after %dms\n",
2412 ahci_reset_to(void *arg)
2414 struct ahci_channel *ch = arg;
2416 if (ch->resetting == 0)
2419 if (ahci_wait_ready(ch, ch->resetting == 0 ? -1 : 0,
2420 (310 - ch->resetting) * 100) == 0) {
2423 xpt_release_simq(ch->sim, TRUE);
2426 if (ch->resetting == 0) {
2429 xpt_release_simq(ch->sim, TRUE);
2432 callout_schedule(&ch->reset_timer, hz / 10);
2436 ahci_reset(struct ahci_channel *ch)
2438 struct ahci_controller *ctlr = device_get_softc(device_get_parent(ch->dev));
2441 xpt_freeze_simq(ch->sim, 1);
2443 device_printf(ch->dev, "AHCI reset...\n");
2444 /* Forget about previous reset. */
2445 if (ch->resetting) {
2447 callout_stop(&ch->reset_timer);
2448 xpt_release_simq(ch->sim, TRUE);
2450 /* Requeue freezed command. */
2452 union ccb *fccb = ch->frozen;
2454 fccb->ccb_h.status = CAM_REQUEUE_REQ | CAM_RELEASE_SIMQ;
2455 if (!(fccb->ccb_h.status & CAM_DEV_QFRZN)) {
2456 xpt_freeze_devq(fccb->ccb_h.path, 1);
2457 fccb->ccb_h.status |= CAM_DEV_QFRZN;
2459 ahci_done(ch, fccb);
2461 /* Kill the engine and requeue all running commands. */
2463 for (i = 0; i < ch->numslots; i++) {
2464 /* Do we have a running request on slot? */
2465 if (ch->slot[i].state < AHCI_SLOT_RUNNING)
2467 /* XXX; Commands in loading state. */
2468 ahci_end_transaction(&ch->slot[i], AHCI_ERR_INNOCENT);
2470 for (i = 0; i < ch->numslots; i++) {
2473 ahci_done(ch, ch->hold[i]);
2477 if (ch->toslots != 0)
2478 xpt_release_simq(ch->sim, TRUE);
2483 /* Tell the XPT about the event */
2484 xpt_async(AC_BUS_RESET, ch->path, NULL);
2485 /* Disable port interrupts */
2486 ATA_OUTL(ch->r_mem, AHCI_P_IE, 0);
2487 /* Reset and reconnect PHY, */
2488 if (!ahci_sata_phy_reset(ch)) {
2490 device_printf(ch->dev,
2491 "AHCI reset: device not found\n");
2493 /* Enable wanted port interrupts */
2494 ATA_OUTL(ch->r_mem, AHCI_P_IE,
2495 (((ch->pm_level != 0) ? AHCI_P_IX_CPD | AHCI_P_IX_MP : 0) |
2496 AHCI_P_IX_PRC | AHCI_P_IX_PC));
2497 xpt_release_simq(ch->sim, TRUE);
2501 device_printf(ch->dev, "AHCI reset: device found\n");
2502 /* Wait for clearing busy status. */
2503 if (ahci_wait_ready(ch, dumping ? 31000 : 0, 0)) {
2507 ch->resetting = 310;
2510 /* Enable wanted port interrupts */
2511 ATA_OUTL(ch->r_mem, AHCI_P_IE,
2512 (((ch->pm_level != 0) ? AHCI_P_IX_CPD | AHCI_P_IX_MP : 0) |
2513 AHCI_P_IX_TFE | AHCI_P_IX_HBF |
2514 AHCI_P_IX_HBD | AHCI_P_IX_IF | AHCI_P_IX_OF |
2515 ((ch->pm_level == 0) ? AHCI_P_IX_PRC : 0) | AHCI_P_IX_PC |
2516 AHCI_P_IX_DP | AHCI_P_IX_UF | (ctlr->ccc ? 0 : AHCI_P_IX_SDB) |
2517 AHCI_P_IX_DS | AHCI_P_IX_PS | (ctlr->ccc ? 0 : AHCI_P_IX_DHR)));
2519 callout_reset(&ch->reset_timer, hz / 10, ahci_reset_to, ch);
2522 xpt_release_simq(ch->sim, TRUE);
2527 ahci_setup_fis(struct ahci_channel *ch, struct ahci_cmd_tab *ctp, union ccb *ccb, int tag)
2529 u_int8_t *fis = &ctp->cfis[0];
2532 fis[0] = 0x27; /* host to device */
2533 fis[1] = (ccb->ccb_h.target_id & 0x0f);
2534 if (ccb->ccb_h.func_code == XPT_SCSI_IO) {
2536 fis[2] = ATA_PACKET_CMD;
2537 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE &&
2538 ch->curr[ccb->ccb_h.target_id].mode >= ATA_DMA)
2541 fis[5] = ccb->csio.dxfer_len;
2542 fis[6] = ccb->csio.dxfer_len >> 8;
2545 fis[15] = ATA_A_4BIT;
2546 bcopy((ccb->ccb_h.flags & CAM_CDB_POINTER) ?
2547 ccb->csio.cdb_io.cdb_ptr : ccb->csio.cdb_io.cdb_bytes,
2548 ctp->acmd, ccb->csio.cdb_len);
2549 bzero(ctp->acmd + ccb->csio.cdb_len, 32 - ccb->csio.cdb_len);
2550 } else if ((ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL) == 0) {
2552 fis[2] = ccb->ataio.cmd.command;
2553 fis[3] = ccb->ataio.cmd.features;
2554 fis[4] = ccb->ataio.cmd.lba_low;
2555 fis[5] = ccb->ataio.cmd.lba_mid;
2556 fis[6] = ccb->ataio.cmd.lba_high;
2557 fis[7] = ccb->ataio.cmd.device;
2558 fis[8] = ccb->ataio.cmd.lba_low_exp;
2559 fis[9] = ccb->ataio.cmd.lba_mid_exp;
2560 fis[10] = ccb->ataio.cmd.lba_high_exp;
2561 fis[11] = ccb->ataio.cmd.features_exp;
2562 if (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA) {
2565 fis[12] = ccb->ataio.cmd.sector_count;
2567 fis[13] = ccb->ataio.cmd.sector_count_exp;
2568 fis[15] = ATA_A_4BIT;
2570 fis[15] = ccb->ataio.cmd.control;
2572 if (ccb->ataio.ata_flags & ATA_FLAG_AUX) {
2573 fis[16] = ccb->ataio.aux & 0xff;
2574 fis[17] = (ccb->ataio.aux >> 8) & 0xff;
2575 fis[18] = (ccb->ataio.aux >> 16) & 0xff;
2576 fis[19] = (ccb->ataio.aux >> 24) & 0xff;
2582 ahci_sata_connect(struct ahci_channel *ch)
2585 int timeout, found = 0;
2587 /* Wait up to 100ms for "connect well" */
2588 for (timeout = 0; timeout < 1000 ; timeout++) {
2589 status = ATA_INL(ch->r_mem, AHCI_P_SSTS);
2590 if ((status & ATA_SS_DET_MASK) != ATA_SS_DET_NO_DEVICE)
2592 if (((status & ATA_SS_DET_MASK) == ATA_SS_DET_PHY_ONLINE) &&
2593 ((status & ATA_SS_SPD_MASK) != ATA_SS_SPD_NO_SPEED) &&
2594 ((status & ATA_SS_IPM_MASK) == ATA_SS_IPM_ACTIVE))
2596 if ((status & ATA_SS_DET_MASK) == ATA_SS_DET_PHY_OFFLINE) {
2598 device_printf(ch->dev, "SATA offline status=%08x\n",
2603 if (found == 0 && timeout >= 100)
2607 if (timeout >= 1000 || !found) {
2609 device_printf(ch->dev,
2610 "SATA connect timeout time=%dus status=%08x\n",
2611 timeout * 100, status);
2616 device_printf(ch->dev, "SATA connect time=%dus status=%08x\n",
2617 timeout * 100, status);
2619 /* Clear SATA error register */
2620 ATA_OUTL(ch->r_mem, AHCI_P_SERR, 0xffffffff);
2625 ahci_sata_phy_reset(struct ahci_channel *ch)
2628 uint32_t val, detval;
2630 if (ch->listening) {
2631 val = ATA_INL(ch->r_mem, AHCI_P_CMD);
2632 val |= AHCI_P_CMD_SUD;
2633 ATA_OUTL(ch->r_mem, AHCI_P_CMD, val);
2636 sata_rev = ch->user[ch->pm_present ? 15 : 0].revision;
2638 val = ATA_SC_SPD_SPEED_GEN1;
2639 else if (sata_rev == 2)
2640 val = ATA_SC_SPD_SPEED_GEN2;
2641 else if (sata_rev == 3)
2642 val = ATA_SC_SPD_SPEED_GEN3;
2645 detval = ahci_ch_detval(ch, ATA_SC_DET_RESET);
2646 ATA_OUTL(ch->r_mem, AHCI_P_SCTL,
2648 ATA_SC_IPM_DIS_PARTIAL | ATA_SC_IPM_DIS_SLUMBER);
2650 detval = ahci_ch_detval(ch, ATA_SC_DET_IDLE);
2651 ATA_OUTL(ch->r_mem, AHCI_P_SCTL,
2652 detval | val | ((ch->pm_level > 0) ? 0 :
2653 (ATA_SC_IPM_DIS_PARTIAL | ATA_SC_IPM_DIS_SLUMBER)));
2654 if (!ahci_sata_connect(ch)) {
2655 if (ch->caps & AHCI_CAP_SSS) {
2656 val = ATA_INL(ch->r_mem, AHCI_P_CMD);
2657 val &= ~AHCI_P_CMD_SUD;
2658 ATA_OUTL(ch->r_mem, AHCI_P_CMD, val);
2660 } else if (ch->pm_level > 0)
2661 ATA_OUTL(ch->r_mem, AHCI_P_SCTL, ATA_SC_DET_DISABLE);
2668 ahci_check_ids(struct ahci_channel *ch, union ccb *ccb)
2671 if (ccb->ccb_h.target_id > ((ch->caps & AHCI_CAP_SPM) ? 15 : 0)) {
2672 ccb->ccb_h.status = CAM_TID_INVALID;
2676 if (ccb->ccb_h.target_lun != 0) {
2677 ccb->ccb_h.status = CAM_LUN_INVALID;
2685 ahciaction(struct cam_sim *sim, union ccb *ccb)
2687 struct ahci_channel *ch;
2689 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("ahciaction func_code=%x\n",
2690 ccb->ccb_h.func_code));
2692 ch = (struct ahci_channel *)cam_sim_softc(sim);
2693 switch (ccb->ccb_h.func_code) {
2694 /* Common cases first */
2695 case XPT_ATA_IO: /* Execute the requested I/O operation */
2697 if (ahci_check_ids(ch, ccb))
2699 if (ch->devices == 0 ||
2700 (ch->pm_present == 0 &&
2701 ccb->ccb_h.target_id > 0 && ccb->ccb_h.target_id < 15)) {
2702 ccb->ccb_h.status = CAM_SEL_TIMEOUT;
2705 ccb->ccb_h.recovery_type = RECOVERY_NONE;
2706 /* Check for command collision. */
2707 if (ahci_check_collision(ch, ccb)) {
2708 /* Freeze command. */
2710 /* We have only one frozen slot, so freeze simq also. */
2711 xpt_freeze_simq(ch->sim, 1);
2714 ahci_begin_transaction(ch, ccb);
2716 case XPT_ABORT: /* Abort the specified CCB */
2718 ccb->ccb_h.status = CAM_REQ_INVALID;
2720 case XPT_SET_TRAN_SETTINGS:
2722 struct ccb_trans_settings *cts = &ccb->cts;
2723 struct ahci_device *d;
2725 if (ahci_check_ids(ch, ccb))
2727 if (cts->type == CTS_TYPE_CURRENT_SETTINGS)
2728 d = &ch->curr[ccb->ccb_h.target_id];
2730 d = &ch->user[ccb->ccb_h.target_id];
2731 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_REVISION)
2732 d->revision = cts->xport_specific.sata.revision;
2733 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_MODE)
2734 d->mode = cts->xport_specific.sata.mode;
2735 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_BYTECOUNT)
2736 d->bytecount = min(8192, cts->xport_specific.sata.bytecount);
2737 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_TAGS)
2738 d->tags = min(ch->numslots, cts->xport_specific.sata.tags);
2739 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_PM)
2740 ch->pm_present = cts->xport_specific.sata.pm_present;
2741 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_ATAPI)
2742 d->atapi = cts->xport_specific.sata.atapi;
2743 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_CAPS)
2744 d->caps = cts->xport_specific.sata.caps;
2745 ccb->ccb_h.status = CAM_REQ_CMP;
2748 case XPT_GET_TRAN_SETTINGS:
2749 /* Get default/user set transfer settings for the target */
2751 struct ccb_trans_settings *cts = &ccb->cts;
2752 struct ahci_device *d;
2755 if (ahci_check_ids(ch, ccb))
2757 if (cts->type == CTS_TYPE_CURRENT_SETTINGS)
2758 d = &ch->curr[ccb->ccb_h.target_id];
2760 d = &ch->user[ccb->ccb_h.target_id];
2761 cts->protocol = PROTO_UNSPECIFIED;
2762 cts->protocol_version = PROTO_VERSION_UNSPECIFIED;
2763 cts->transport = XPORT_SATA;
2764 cts->transport_version = XPORT_VERSION_UNSPECIFIED;
2765 cts->proto_specific.valid = 0;
2766 cts->xport_specific.sata.valid = 0;
2767 if (cts->type == CTS_TYPE_CURRENT_SETTINGS &&
2768 (ccb->ccb_h.target_id == 15 ||
2769 (ccb->ccb_h.target_id == 0 && !ch->pm_present))) {
2770 status = ATA_INL(ch->r_mem, AHCI_P_SSTS) & ATA_SS_SPD_MASK;
2771 if (status & 0x0f0) {
2772 cts->xport_specific.sata.revision =
2773 (status & 0x0f0) >> 4;
2774 cts->xport_specific.sata.valid |=
2775 CTS_SATA_VALID_REVISION;
2777 cts->xport_specific.sata.caps = d->caps & CTS_SATA_CAPS_D;
2779 if (ch->caps & (AHCI_CAP_PSC | AHCI_CAP_SSC))
2780 cts->xport_specific.sata.caps |= CTS_SATA_CAPS_H_PMREQ;
2781 if (ch->caps2 & AHCI_CAP2_APST)
2782 cts->xport_specific.sata.caps |= CTS_SATA_CAPS_H_APST;
2784 if ((ch->caps & AHCI_CAP_SNCQ) &&
2785 (ch->quirks & AHCI_Q_NOAA) == 0)
2786 cts->xport_specific.sata.caps |= CTS_SATA_CAPS_H_DMAAA;
2787 cts->xport_specific.sata.caps |= CTS_SATA_CAPS_H_AN;
2788 cts->xport_specific.sata.caps &=
2789 ch->user[ccb->ccb_h.target_id].caps;
2790 cts->xport_specific.sata.valid |= CTS_SATA_VALID_CAPS;
2792 cts->xport_specific.sata.revision = d->revision;
2793 cts->xport_specific.sata.valid |= CTS_SATA_VALID_REVISION;
2794 cts->xport_specific.sata.caps = d->caps;
2795 cts->xport_specific.sata.valid |= CTS_SATA_VALID_CAPS;
2797 cts->xport_specific.sata.mode = d->mode;
2798 cts->xport_specific.sata.valid |= CTS_SATA_VALID_MODE;
2799 cts->xport_specific.sata.bytecount = d->bytecount;
2800 cts->xport_specific.sata.valid |= CTS_SATA_VALID_BYTECOUNT;
2801 cts->xport_specific.sata.pm_present = ch->pm_present;
2802 cts->xport_specific.sata.valid |= CTS_SATA_VALID_PM;
2803 cts->xport_specific.sata.tags = d->tags;
2804 cts->xport_specific.sata.valid |= CTS_SATA_VALID_TAGS;
2805 cts->xport_specific.sata.atapi = d->atapi;
2806 cts->xport_specific.sata.valid |= CTS_SATA_VALID_ATAPI;
2807 ccb->ccb_h.status = CAM_REQ_CMP;
2810 case XPT_RESET_BUS: /* Reset the specified SCSI bus */
2811 case XPT_RESET_DEV: /* Bus Device Reset the specified SCSI device */
2813 ccb->ccb_h.status = CAM_REQ_CMP;
2815 case XPT_TERM_IO: /* Terminate the I/O process */
2817 ccb->ccb_h.status = CAM_REQ_INVALID;
2819 case XPT_PATH_INQ: /* Path routing inquiry */
2821 struct ccb_pathinq *cpi = &ccb->cpi;
2823 cpi->version_num = 1; /* XXX??? */
2824 cpi->hba_inquiry = PI_SDTR_ABLE;
2825 if (ch->caps & AHCI_CAP_SNCQ)
2826 cpi->hba_inquiry |= PI_TAG_ABLE;
2827 if (ch->caps & AHCI_CAP_SPM)
2828 cpi->hba_inquiry |= PI_SATAPM;
2829 cpi->target_sprt = 0;
2830 cpi->hba_misc = PIM_SEQSCAN | PIM_UNMAPPED;
2831 if ((ch->quirks & AHCI_Q_NOAUX) == 0)
2832 cpi->hba_misc |= PIM_ATA_EXT;
2833 cpi->hba_eng_cnt = 0;
2834 if (ch->caps & AHCI_CAP_SPM)
2835 cpi->max_target = 15;
2837 cpi->max_target = 0;
2839 cpi->initiator_id = 0;
2840 cpi->bus_id = cam_sim_bus(sim);
2841 cpi->base_transfer_speed = 150000;
2842 strlcpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
2843 strlcpy(cpi->hba_vid, "AHCI", HBA_IDLEN);
2844 strlcpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
2845 cpi->unit_number = cam_sim_unit(sim);
2846 cpi->transport = XPORT_SATA;
2847 cpi->transport_version = XPORT_VERSION_UNSPECIFIED;
2848 cpi->protocol = PROTO_ATA;
2849 cpi->protocol_version = PROTO_VERSION_UNSPECIFIED;
2850 cpi->maxio = MAXPHYS;
2851 /* ATI SB600 can't handle 256 sectors with FPDMA (NCQ). */
2852 if (ch->quirks & AHCI_Q_MAXIO_64K)
2853 cpi->maxio = min(cpi->maxio, 128 * 512);
2854 cpi->hba_vendor = ch->vendorid;
2855 cpi->hba_device = ch->deviceid;
2856 cpi->hba_subvendor = ch->subvendorid;
2857 cpi->hba_subdevice = ch->subdeviceid;
2858 cpi->ccb_h.status = CAM_REQ_CMP;
2862 ccb->ccb_h.status = CAM_REQ_INVALID;
2869 ahcipoll(struct cam_sim *sim)
2871 struct ahci_channel *ch = (struct ahci_channel *)cam_sim_softc(sim);
2874 /* Read interrupt statuses and process if any. */
2875 istatus = ATA_INL(ch->r_mem, AHCI_P_IS);
2877 ahci_ch_intr_main(ch, istatus);
2878 if (ch->resetting != 0 &&
2879 (--ch->resetpolldiv <= 0 || !callout_pending(&ch->reset_timer))) {
2880 ch->resetpolldiv = 1000;
2885 devclass_t ahci_devclass;
2887 MODULE_VERSION(ahci, 1);
2888 MODULE_DEPEND(ahci, cam, 1, 1, 1);