2 * Copyright (c) 1999 - 2001 John Hay.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. Neither the name of the author nor the names of any co-contributors
14 * may be used to endorse or promote products derived from this software
15 * without specific prior written permission.
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30 #include <sys/cdefs.h>
31 __FBSDID("$FreeBSD$");
33 #include <sys/param.h>
34 #include <sys/systm.h>
35 #include <sys/kernel.h>
36 #include <sys/malloc.h>
37 #include <sys/module.h>
39 #include <machine/bus.h>
40 #include <machine/resource.h>
43 #include <dev/pci/pcireg.h>
44 #include <dev/pci/pcivar.h>
46 #include <dev/ic/hd64570.h>
47 #include <dev/ar/if_arregs.h>
57 static int ar_pci_probe(device_t);
58 static int ar_pci_attach(device_t);
60 static device_method_t ar_pci_methods[] = {
61 /* Device interface */
62 DEVMETHOD(device_probe, ar_pci_probe),
63 DEVMETHOD(device_attach, ar_pci_attach),
64 DEVMETHOD(device_detach, ar_detach),
68 static driver_t ar_pci_driver = {
71 sizeof(struct ar_hardc),
74 DRIVER_MODULE(ar, pci, ar_pci_driver, ar_devclass, 0, 0);
75 MODULE_DEPEND(ar, pci, 1, 1, 1);
78 ar_pci_probe(device_t device)
80 u_int32_t type = pci_get_devid(device);
84 device_set_desc(device, "Digi SYNC/570i-PCI 2 port");
85 return (BUS_PROBE_DEFAULT);
88 printf("Digi SYNC/570i-PCI 2 port (mapped below 1M)\n");
89 printf("Please change the jumper to select linear mode.\n");
92 device_set_desc(device, "Digi SYNC/570i-PCI 4 port");
93 return (BUS_PROBE_DEFAULT);
96 printf("Digi SYNC/570i-PCI 4 port (mapped below 1M)\n");
97 printf("Please change the jumper to select linear mode.\n");
106 ar_pci_attach(device_t device)
112 hc = (struct ar_hardc *)device_get_softc(device);
113 bzero(hc, sizeof(struct ar_hardc));
115 error = ar_allocate_plx_memory(device, 0x10, 1);
119 error = ar_allocate_memory(device, 0x18, 1);
123 error = ar_allocate_irq(device, 0, 1);
127 hc->mem_start = rman_get_virtual(hc->res_memory);
129 hc->cunit = device_get_unit(device);
130 hc->sca[0] = (sca_regs *)(hc->mem_start + AR_PCI_SCA_1_OFFSET);
131 hc->sca[1] = (sca_regs *)(hc->mem_start + AR_PCI_SCA_2_OFFSET);
132 hc->orbase = (u_char *)(hc->mem_start + AR_PCI_ORBASE_OFFSET);
134 tmp = hc->orbase[AR_BMI * 4];
135 hc->bustype = tmp & AR_BUS_MSK;
136 hc->memsize = (tmp & AR_MEM_MSK) >> AR_MEM_SHFT;
137 hc->memsize = 1 << hc->memsize;
139 hc->interface[0] = (tmp & AR_IFACE_MSK);
140 tmp = hc->orbase[AR_REV * 4];
141 hc->revision = tmp & AR_REV_MSK;
142 hc->winsize = (1 << ((tmp & AR_WSIZ_MSK) >> AR_WSIZ_SHFT)) * 16 * 1024;
143 hc->mem_end = (caddr_t)(hc->mem_start + hc->winsize);
144 hc->winmsk = hc->winsize - 1;
145 hc->numports = hc->orbase[AR_PNUM * 4];
146 hc->handshake = hc->orbase[AR_HNDSH * 4];
148 for(i = 1; i < hc->numports; i++)
149 hc->interface[i] = hc->interface[0];
151 TRC(printf("arp%d: bus %x, rev %d, memstart %p, winsize %d, "
152 "winmsk %x, interface %x\n",
153 unit, hc->bustype, hc->revision, hc->mem_start, hc->winsize,
154 hc->winmsk, hc->interface[0]));
158 /* Magic to enable the card to generate interrupts. */
159 bus_space_write_1(rman_get_bustag(hc->res_plx_memory),
160 rman_get_bushandle(hc->res_plx_memory), 0x69, 0x09);
165 ar_deallocate_resources(device);