]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - sys/dev/ath/if_ath_led.c
First pass of LED related code changes.
[FreeBSD/FreeBSD.git] / sys / dev / ath / if_ath_led.c
1 /*-
2  * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer,
10  *    without modification.
11  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
12  *    similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
13  *    redistribution must be conditioned upon including a substantially
14  *    similar Disclaimer requirement for further binary redistribution.
15  *
16  * NO WARRANTY
17  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
18  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
19  * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
20  * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
21  * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
22  * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
23  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
24  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
25  * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
26  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
27  * THE POSSIBILITY OF SUCH DAMAGES.
28  */
29
30 #include <sys/cdefs.h>
31 __FBSDID("$FreeBSD$");
32
33 /*
34  * Driver for the Atheros Wireless LAN controller.
35  *
36  * This software is derived from work of Atsushi Onoe; his contribution
37  * is greatly appreciated.
38  */
39
40 #include "opt_inet.h"
41 #include "opt_ath.h"
42 /*
43  * This is needed for register operations which are performed
44  * by the driver - eg, calls to ath_hal_gettsf32().
45  */
46 #include "opt_ah.h"
47 #include "opt_wlan.h"
48
49 #include <sys/param.h>
50 #include <sys/systm.h>
51 #include <sys/sysctl.h>
52 #include <sys/mbuf.h>
53 #include <sys/malloc.h>
54 #include <sys/lock.h>
55 #include <sys/mutex.h>
56 #include <sys/kernel.h>
57 #include <sys/socket.h>
58 #include <sys/sockio.h>
59 #include <sys/errno.h>
60 #include <sys/callout.h>
61 #include <sys/bus.h>
62 #include <sys/endian.h>
63 #include <sys/kthread.h>
64 #include <sys/taskqueue.h>
65 #include <sys/priv.h>
66 #include <sys/module.h>
67 #include <sys/ktr.h>
68 #include <sys/smp.h>    /* for mp_ncpus */
69
70 #include <machine/bus.h>
71
72 #include <net/if.h>
73 #include <net/if_dl.h>
74 #include <net/if_media.h>
75 #include <net/if_types.h>
76 #include <net/if_arp.h>
77 #include <net/ethernet.h>
78 #include <net/if_llc.h>
79
80 #include <net80211/ieee80211_var.h>
81 #include <net80211/ieee80211_regdomain.h>
82 #ifdef IEEE80211_SUPPORT_SUPERG
83 #include <net80211/ieee80211_superg.h>
84 #endif
85 #ifdef IEEE80211_SUPPORT_TDMA
86 #include <net80211/ieee80211_tdma.h>
87 #endif
88
89 #include <net/bpf.h>
90
91 #ifdef INET
92 #include <netinet/in.h>
93 #include <netinet/if_ether.h>
94 #endif
95
96 #include <dev/ath/if_athvar.h>
97 #include <dev/ath/ath_hal/ah_devid.h>           /* XXX for softled */
98 #include <dev/ath/ath_hal/ah_diagcodes.h>
99
100 #include <dev/ath/if_ath_debug.h>
101 #include <dev/ath/if_ath_misc.h>
102
103 #include <dev/ath/if_ath_led.h>
104
105 /*
106  * Software LED driver routines.
107  */
108
109 /*
110  * XXX TODO: move the LED sysctls here.
111  */
112
113 static void
114 ath_led_done(void *arg)
115 {
116         struct ath_softc *sc = arg;
117
118         sc->sc_blinking = 0;
119 }
120
121 /*
122  * Turn the LED off: flip the pin and then set a timer so no
123  * update will happen for the specified duration.
124  */
125 static void
126 ath_led_off(void *arg)
127 {
128         struct ath_softc *sc = arg;
129
130         ath_hal_gpioset(sc->sc_ah, sc->sc_ledpin, !sc->sc_ledon);
131         callout_reset(&sc->sc_ledtimer, sc->sc_ledoff, ath_led_done, sc);
132 }
133
134 /*
135  * Blink the LED according to the specified on/off times.
136  */
137 static void
138 ath_led_blink(struct ath_softc *sc, int on, int off)
139 {
140         DPRINTF(sc, ATH_DEBUG_LED, "%s: on %u off %u\n", __func__, on, off);
141         ath_hal_gpioset(sc->sc_ah, sc->sc_ledpin, sc->sc_ledon);
142         sc->sc_blinking = 1;
143         sc->sc_ledoff = off;
144         callout_reset(&sc->sc_ledtimer, on, ath_led_off, sc);
145 }
146
147 void
148 ath_led_event(struct ath_softc *sc, int rix)
149 {
150         sc->sc_ledevent = ticks;        /* time of last event */
151         if (sc->sc_blinking)            /* don't interrupt active blink */
152                 return;
153         ath_led_blink(sc, sc->sc_hwmap[rix].ledon, sc->sc_hwmap[rix].ledoff);
154 }