2 * Copyright (c) 1992, 1993 Erik Forsberg.
3 * Copyright (c) 1996, 1997 Kazutaka YOKOTA.
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
12 * THIS SOFTWARE IS PROVIDED BY ``AS IS'' AND ANY EXPRESS OR IMPLIED
13 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
14 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
15 * NO EVENT SHALL I BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
16 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
17 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
18 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
19 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
20 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
21 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
24 * Ported to 386bsd Oct 17, 1992
25 * Sandi Donno, Computer Science, University of Cape Town, South Africa
26 * Please send bug reports to sandi@cs.uct.ac.za
28 * Thanks are also due to Rick Macklem, rick@snowhite.cis.uoguelph.ca -
29 * although I was only partially successful in getting the alpha release
30 * of his "driver for the Logitech and ATI Inport Bus mice for use with
31 * 386bsd and the X386 port" to work with my Microsoft mouse, I nevertheless
32 * found his code to be an invaluable reference when porting this driver
35 * Further modifications for latest 386BSD+patchkit and port to NetBSD,
36 * Andrew Herbert <andrew@werple.apana.org.au> - 8 June 1993
38 * Cloned from the Microsoft Bus Mouse driver, also by Erik Forsberg, by
39 * Andrew Herbert - 12 June 1993
41 * Modified for PS/2 mouse by Charles Hannum <mycroft@ai.mit.edu>
44 * Modified for PS/2 AUX mouse by Shoji Yuen <yuen@nuie.nagoya-u.ac.jp>
47 * Hardware access routines and probe logic rewritten by
48 * Kazutaka Yokota <yokota@zodiac.mech.utsunomiya-u.ac.jp>
49 * - 3, 14, 22 October 1996.
50 * - 12 November 1996. IOCTLs and rearranging `psmread', `psmioctl'...
51 * - 14, 30 November 1996. Uses `kbdio.c'.
52 * - 13 December 1996. Uses queuing version of `kbdio.c'.
53 * - January/February 1997. Tweaked probe logic for
54 * HiNote UltraII/Latitude/Armada laptops.
55 * - 30 July 1997. Added APM support.
56 * - 5 March 1997. Defined driver configuration flags (PSM_CONFIG_XXX).
57 * Improved sync check logic.
58 * Vendor specific support routines.
61 #include <sys/cdefs.h>
62 __FBSDID("$FreeBSD$");
67 #include <sys/param.h>
68 #include <sys/systm.h>
69 #include <sys/kernel.h>
70 #include <sys/module.h>
73 #include <sys/filio.h>
75 #include <sys/sigio.h>
76 #include <sys/signalvar.h>
77 #include <sys/syslog.h>
78 #include <machine/bus.h>
80 #include <sys/selinfo.h>
81 #include <sys/sysctl.h>
85 #include <sys/limits.h>
86 #include <sys/mouse.h>
87 #include <machine/resource.h>
90 #include <isa/isavar.h>
93 #include <dev/atkbdc/atkbdcreg.h>
94 #include <dev/atkbdc/psm.h>
97 * Driver specific options: the following options may be set by
98 * `options' statements in the kernel configuration file.
103 #define PSM_DEBUG 0 /*
104 * logging: 0: none, 1: brief, 2: verbose
105 * 3: sync errors, 4: all packets
108 #define VLOG(level, args) do { \
109 if (verbose >= level) \
113 #ifndef PSM_INPUT_TIMEOUT
114 #define PSM_INPUT_TIMEOUT 2000000 /* 2 sec */
117 #ifndef PSM_TAP_TIMEOUT
118 #define PSM_TAP_TIMEOUT 125000
121 #ifndef PSM_TAP_THRESHOLD
122 #define PSM_TAP_THRESHOLD 25
125 /* end of driver specific options */
127 #define PSMCPNP_DRIVER_NAME "psmcpnp"
130 #define PSM_BUFSIZE 960
131 #define PSM_SMALLBUFSIZE 240
133 /* operation levels */
134 #define PSM_LEVEL_BASE 0
135 #define PSM_LEVEL_STANDARD 1
136 #define PSM_LEVEL_NATIVE 2
137 #define PSM_LEVEL_MIN PSM_LEVEL_BASE
138 #define PSM_LEVEL_MAX PSM_LEVEL_NATIVE
140 /* Logitech PS2++ protocol */
141 #define MOUSE_PS2PLUS_CHECKBITS(b) \
142 ((((b[2] & 0x03) << 2) | 0x02) == (b[1] & 0x0f))
143 #define MOUSE_PS2PLUS_PACKET_TYPE(b) \
144 (((b[0] & 0x30) >> 2) | ((b[1] & 0x30) >> 4))
147 typedef struct ringbuf {
148 int count; /* # of valid elements in the buffer */
149 int head; /* head pointer */
150 int tail; /* tail poiner */
151 u_char buf[PSM_BUFSIZE];
155 typedef struct packetbuf {
156 u_char ipacket[16]; /* interim input buffer */
157 int inputbytes; /* # of bytes in the input buffer */
160 #ifndef PSM_PACKETQUEUE
161 #define PSM_PACKETQUEUE 128
165 SYNAPTICS_SYSCTL_MIN_PRESSURE,
166 SYNAPTICS_SYSCTL_MAX_PRESSURE,
167 SYNAPTICS_SYSCTL_MAX_WIDTH,
168 SYNAPTICS_SYSCTL_MARGIN_TOP,
169 SYNAPTICS_SYSCTL_MARGIN_RIGHT,
170 SYNAPTICS_SYSCTL_MARGIN_BOTTOM,
171 SYNAPTICS_SYSCTL_MARGIN_LEFT,
172 SYNAPTICS_SYSCTL_NA_TOP,
173 SYNAPTICS_SYSCTL_NA_RIGHT,
174 SYNAPTICS_SYSCTL_NA_BOTTOM,
175 SYNAPTICS_SYSCTL_NA_LEFT,
176 SYNAPTICS_SYSCTL_WINDOW_MIN,
177 SYNAPTICS_SYSCTL_WINDOW_MAX,
178 SYNAPTICS_SYSCTL_MULTIPLICATOR,
179 SYNAPTICS_SYSCTL_WEIGHT_CURRENT,
180 SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS,
181 SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS_NA,
182 SYNAPTICS_SYSCTL_WEIGHT_LEN_SQUARED,
183 SYNAPTICS_SYSCTL_DIV_MIN,
184 SYNAPTICS_SYSCTL_DIV_MAX,
185 SYNAPTICS_SYSCTL_DIV_MAX_NA,
186 SYNAPTICS_SYSCTL_DIV_LEN,
187 SYNAPTICS_SYSCTL_TAP_MAX_DELTA,
188 SYNAPTICS_SYSCTL_TAP_MIN_QUEUE,
189 SYNAPTICS_SYSCTL_TAPHOLD_TIMEOUT,
190 SYNAPTICS_SYSCTL_VSCROLL_HOR_AREA,
191 SYNAPTICS_SYSCTL_VSCROLL_VER_AREA,
192 SYNAPTICS_SYSCTL_VSCROLL_MIN_DELTA,
193 SYNAPTICS_SYSCTL_VSCROLL_DIV_MIN,
194 SYNAPTICS_SYSCTL_VSCROLL_DIV_MAX,
195 SYNAPTICS_SYSCTL_TOUCHPAD_OFF
198 typedef struct synapticsinfo {
199 struct sysctl_ctx_list sysctl_ctx;
200 struct sysctl_oid *sysctl_tree;
201 int directional_scrolls;
202 int two_finger_scroll;
219 int weight_previous_na;
220 int weight_len_squared;
228 int vscroll_ver_area;
229 int vscroll_hor_area;
230 int vscroll_min_delta;
236 typedef struct synapticspacket {
241 #define SYNAPTICS_PACKETQUEUE 10
242 #define SYNAPTICS_QUEUE_CURSOR(x) \
243 (x + SYNAPTICS_PACKETQUEUE) % SYNAPTICS_PACKETQUEUE
245 #define SYNAPTICS_VERSION_GE(synhw, major, minor) \
246 ((synhw).infoMajor > (major) || \
247 ((synhw).infoMajor == (major) && (synhw).infoMinor >= (minor)))
249 typedef struct synapticsaction {
250 synapticspacket_t queue[SYNAPTICS_PACKETQUEUE];
267 TRACKPOINT_SYSCTL_SENSITIVITY,
268 TRACKPOINT_SYSCTL_NEGATIVE_INERTIA,
269 TRACKPOINT_SYSCTL_UPPER_PLATEAU,
270 TRACKPOINT_SYSCTL_BACKUP_RANGE,
271 TRACKPOINT_SYSCTL_DRAG_HYSTERESIS,
272 TRACKPOINT_SYSCTL_MINIMUM_DRAG,
273 TRACKPOINT_SYSCTL_UP_THRESHOLD,
274 TRACKPOINT_SYSCTL_THRESHOLD,
275 TRACKPOINT_SYSCTL_JENKS_CURVATURE,
276 TRACKPOINT_SYSCTL_Z_TIME,
277 TRACKPOINT_SYSCTL_PRESS_TO_SELECT,
278 TRACKPOINT_SYSCTL_SKIP_BACKUPS
281 typedef struct trackpointinfo {
282 struct sysctl_ctx_list sysctl_ctx;
283 struct sysctl_oid *sysctl_tree;
298 /* driver control block */
299 struct psm_softc { /* Driver status information */
301 struct selinfo rsel; /* Process selecting for Input */
302 u_char state; /* Mouse driver state */
303 int config; /* driver configuration flags */
304 int flags; /* other flags */
305 KBDC kbdc; /* handle to access kbd controller */
306 struct resource *intr; /* IRQ resource */
307 void *ih; /* interrupt handle */
308 mousehw_t hw; /* hardware information */
309 synapticshw_t synhw; /* Synaptics hardware information */
310 synapticsinfo_t syninfo; /* Synaptics configuration */
311 synapticsaction_t synaction; /* Synaptics action context */
312 int tphw; /* TrackPoint hardware information */
313 trackpointinfo_t tpinfo; /* TrackPoint configuration */
314 mousemode_t mode; /* operation mode */
315 mousemode_t dflt_mode; /* default operation mode */
316 mousestatus_t status; /* accumulated mouse movement */
317 ringbuf_t queue; /* mouse status queue */
318 packetbuf_t pqueue[PSM_PACKETQUEUE]; /* mouse data queue */
319 int pqueue_start; /* start of data in queue */
320 int pqueue_end; /* end of data in queue */
321 int button; /* the latest button state */
322 int xold; /* previous absolute X position */
323 int yold; /* previous absolute Y position */
324 int xaverage; /* average X position */
325 int yaverage; /* average Y position */
326 int squelch; /* level to filter movement at low speed */
327 int zmax; /* maximum pressure value for touchpads */
328 int syncerrors; /* # of bytes discarded to synchronize */
329 int pkterrors; /* # of packets failed during quaranteen. */
330 struct timeval inputtimeout;
331 struct timeval lastsoftintr; /* time of last soft interrupt */
332 struct timeval lastinputerr; /* time last sync error happened */
333 struct timeval taptimeout; /* tap timeout for touchpads */
334 int watchdog; /* watchdog timer flag */
335 struct callout callout; /* watchdog timer call out */
336 struct callout softcallout; /* buffer timer call out */
341 struct sigio *async; /* Processes waiting for SIGIO */
342 int extended_buttons;
344 static devclass_t psm_devclass;
346 /* driver state flags (state) */
347 #define PSM_VALID 0x80
348 #define PSM_OPEN 1 /* Device is open */
349 #define PSM_ASLP 2 /* Waiting for mouse data */
350 #define PSM_SOFTARMED 4 /* Software interrupt armed */
351 #define PSM_NEED_SYNCBITS 8 /* Set syncbits using next data pkt */
353 /* driver configuration flags (config) */
354 #define PSM_CONFIG_RESOLUTION 0x000f /* resolution */
355 #define PSM_CONFIG_ACCEL 0x00f0 /* acceleration factor */
356 #define PSM_CONFIG_NOCHECKSYNC 0x0100 /* disable sync. test */
357 #define PSM_CONFIG_NOIDPROBE 0x0200 /* disable mouse model probe */
358 #define PSM_CONFIG_NORESET 0x0400 /* don't reset the mouse */
359 #define PSM_CONFIG_FORCETAP 0x0800 /* assume `tap' action exists */
360 #define PSM_CONFIG_IGNPORTERROR 0x1000 /* ignore error in aux port test */
361 #define PSM_CONFIG_HOOKRESUME 0x2000 /* hook the system resume event */
362 #define PSM_CONFIG_INITAFTERSUSPEND 0x4000 /* init the device at the resume event */
364 #define PSM_CONFIG_FLAGS \
365 (PSM_CONFIG_RESOLUTION | \
367 PSM_CONFIG_NOCHECKSYNC | \
368 PSM_CONFIG_NOIDPROBE | \
369 PSM_CONFIG_NORESET | \
370 PSM_CONFIG_FORCETAP | \
371 PSM_CONFIG_IGNPORTERROR | \
372 PSM_CONFIG_HOOKRESUME | \
373 PSM_CONFIG_INITAFTERSUSPEND)
375 /* other flags (flags) */
376 #define PSM_FLAGS_FINGERDOWN 0x0001 /* VersaPad finger down */
378 #define kbdcp(p) ((atkbdc_softc_t *)(p))
379 #define ALWAYS_RESTORE_CONTROLLER(kbdc) !(kbdcp(kbdc)->quirks \
380 & KBDC_QUIRK_KEEP_ACTIVATED)
383 static int tap_enabled = -1;
384 TUNABLE_INT("hw.psm.tap_enabled", &tap_enabled);
386 static int synaptics_support = 0;
387 TUNABLE_INT("hw.psm.synaptics_support", &synaptics_support);
389 static int trackpoint_support = 0;
390 TUNABLE_INT("hw.psm.trackpoint_support", &trackpoint_support);
392 static int verbose = PSM_DEBUG;
393 TUNABLE_INT("debug.psm.loglevel", &verbose);
395 /* for backward compatibility */
396 #define OLD_MOUSE_GETHWINFO _IOR('M', 1, old_mousehw_t)
397 #define OLD_MOUSE_GETMODE _IOR('M', 2, old_mousemode_t)
398 #define OLD_MOUSE_SETMODE _IOW('M', 3, old_mousemode_t)
400 typedef struct old_mousehw {
407 typedef struct old_mousemode {
414 /* packet formatting function */
415 typedef int packetfunc_t(struct psm_softc *, u_char *, int *, int,
418 /* function prototypes */
419 static void psmidentify(driver_t *, device_t);
420 static int psmprobe(device_t);
421 static int psmattach(device_t);
422 static int psmdetach(device_t);
423 static int psmresume(device_t);
425 static d_open_t psmopen;
426 static d_close_t psmclose;
427 static d_read_t psmread;
428 static d_write_t psmwrite;
429 static d_ioctl_t psmioctl;
430 static d_poll_t psmpoll;
432 static int enable_aux_dev(KBDC);
433 static int disable_aux_dev(KBDC);
434 static int get_mouse_status(KBDC, int *, int, int);
435 static int get_aux_id(KBDC);
436 static int set_mouse_sampling_rate(KBDC, int);
437 static int set_mouse_scaling(KBDC, int);
438 static int set_mouse_resolution(KBDC, int);
439 static int set_mouse_mode(KBDC);
440 static int get_mouse_buttons(KBDC);
441 static int is_a_mouse(int);
442 static void recover_from_error(KBDC);
443 static int restore_controller(KBDC, int);
444 static int doinitialize(struct psm_softc *, mousemode_t *);
445 static int doopen(struct psm_softc *, int);
446 static int reinitialize(struct psm_softc *, int);
447 static char *model_name(int);
448 static void psmsoftintr(void *);
449 static void psmintr(void *);
450 static void psmtimeout(void *);
451 static int timeelapsed(const struct timeval *, int, int,
452 const struct timeval *);
453 static void dropqueue(struct psm_softc *);
454 static void flushpackets(struct psm_softc *);
455 static void proc_mmanplus(struct psm_softc *, packetbuf_t *,
456 mousestatus_t *, int *, int *, int *);
457 static int proc_synaptics(struct psm_softc *, packetbuf_t *,
458 mousestatus_t *, int *, int *, int *);
459 static void proc_versapad(struct psm_softc *, packetbuf_t *,
460 mousestatus_t *, int *, int *, int *);
461 static int tame_mouse(struct psm_softc *, packetbuf_t *, mousestatus_t *,
464 /* vendor specific features */
465 enum probearg { PROBE, REINIT };
466 typedef int probefunc_t(struct psm_softc *, enum probearg);
468 static int mouse_id_proc1(KBDC, int, int, int *);
469 static int mouse_ext_command(KBDC, int);
471 static probefunc_t enable_groller;
472 static probefunc_t enable_gmouse;
473 static probefunc_t enable_aglide;
474 static probefunc_t enable_kmouse;
475 static probefunc_t enable_msexplorer;
476 static probefunc_t enable_msintelli;
477 static probefunc_t enable_4dmouse;
478 static probefunc_t enable_4dplus;
479 static probefunc_t enable_mmanplus;
480 static probefunc_t enable_synaptics;
481 static probefunc_t enable_trackpoint;
482 static probefunc_t enable_versapad;
484 static void set_trackpoint_parameters(struct psm_softc *sc);
485 static void synaptics_passthrough_on(struct psm_softc *sc);
486 static void synaptics_passthrough_off(struct psm_softc *sc);
487 static int synaptics_preferred_mode(struct psm_softc *sc);
488 static void synaptics_set_mode(struct psm_softc *sc, int mode_byte);
494 probefunc_t *probefunc;
497 * WARNING: the order of probe is very important. Don't mess it
498 * unless you know what you are doing.
500 { MOUSE_MODEL_NET, /* Genius NetMouse */
501 0x08, MOUSE_PS2INTELLI_PACKETSIZE, enable_gmouse },
502 { MOUSE_MODEL_NETSCROLL, /* Genius NetScroll */
503 0xc8, 6, enable_groller },
504 { MOUSE_MODEL_MOUSEMANPLUS, /* Logitech MouseMan+ */
505 0x08, MOUSE_PS2_PACKETSIZE, enable_mmanplus },
506 { MOUSE_MODEL_EXPLORER, /* Microsoft IntelliMouse Explorer */
507 0x08, MOUSE_PS2INTELLI_PACKETSIZE, enable_msexplorer },
508 { MOUSE_MODEL_4D, /* A4 Tech 4D Mouse */
509 0x08, MOUSE_4D_PACKETSIZE, enable_4dmouse },
510 { MOUSE_MODEL_4DPLUS, /* A4 Tech 4D+ Mouse */
511 0xc8, MOUSE_4DPLUS_PACKETSIZE, enable_4dplus },
512 { MOUSE_MODEL_SYNAPTICS, /* Synaptics Touchpad */
513 0xc0, MOUSE_SYNAPTICS_PACKETSIZE, enable_synaptics },
514 { MOUSE_MODEL_INTELLI, /* Microsoft IntelliMouse */
515 0x08, MOUSE_PS2INTELLI_PACKETSIZE, enable_msintelli },
516 { MOUSE_MODEL_GLIDEPOINT, /* ALPS GlidePoint */
517 0xc0, MOUSE_PS2_PACKETSIZE, enable_aglide },
518 { MOUSE_MODEL_THINK, /* Kensington ThinkingMouse */
519 0x80, MOUSE_PS2_PACKETSIZE, enable_kmouse },
520 { MOUSE_MODEL_VERSAPAD, /* Interlink electronics VersaPad */
521 0xe8, MOUSE_PS2VERSA_PACKETSIZE, enable_versapad },
522 { MOUSE_MODEL_TRACKPOINT, /* IBM/Lenovo TrackPoint */
523 0xc0, MOUSE_PS2_PACKETSIZE, enable_trackpoint },
524 { MOUSE_MODEL_GENERIC,
525 0xc0, MOUSE_PS2_PACKETSIZE, NULL },
527 #define GENERIC_MOUSE_ENTRY \
528 ((sizeof(vendortype) / sizeof(*vendortype)) - 1)
530 /* device driver declarateion */
531 static device_method_t psm_methods[] = {
532 /* Device interface */
533 DEVMETHOD(device_identify, psmidentify),
534 DEVMETHOD(device_probe, psmprobe),
535 DEVMETHOD(device_attach, psmattach),
536 DEVMETHOD(device_detach, psmdetach),
537 DEVMETHOD(device_resume, psmresume),
542 static driver_t psm_driver = {
545 sizeof(struct psm_softc),
548 static struct cdevsw psm_cdevsw = {
549 .d_version = D_VERSION,
550 .d_flags = D_NEEDGIANT,
557 .d_name = PSM_DRIVER_NAME,
560 /* device I/O routines */
562 enable_aux_dev(KBDC kbdc)
566 res = send_aux_command(kbdc, PSMC_ENABLE_DEV);
567 VLOG(2, (LOG_DEBUG, "psm: ENABLE_DEV return code:%04x\n", res));
569 return (res == PSM_ACK);
573 disable_aux_dev(KBDC kbdc)
577 res = send_aux_command(kbdc, PSMC_DISABLE_DEV);
578 VLOG(2, (LOG_DEBUG, "psm: DISABLE_DEV return code:%04x\n", res));
580 return (res == PSM_ACK);
584 get_mouse_status(KBDC kbdc, int *status, int flag, int len)
593 cmd = PSMC_SEND_DEV_STATUS;
596 cmd = PSMC_SEND_DEV_DATA;
599 empty_aux_buffer(kbdc, 5);
600 res = send_aux_command(kbdc, cmd);
601 VLOG(2, (LOG_DEBUG, "psm: SEND_AUX_DEV_%s return code:%04x\n",
602 (flag == 1) ? "DATA" : "STATUS", res));
606 for (i = 0; i < len; ++i) {
607 status[i] = read_aux_data(kbdc);
612 VLOG(1, (LOG_DEBUG, "psm: %s %02x %02x %02x\n",
613 (flag == 1) ? "data" : "status", status[0], status[1], status[2]));
619 get_aux_id(KBDC kbdc)
624 empty_aux_buffer(kbdc, 5);
625 res = send_aux_command(kbdc, PSMC_SEND_DEV_ID);
626 VLOG(2, (LOG_DEBUG, "psm: SEND_DEV_ID return code:%04x\n", res));
633 id = read_aux_data(kbdc);
634 VLOG(2, (LOG_DEBUG, "psm: device ID: %04x\n", id));
640 set_mouse_sampling_rate(KBDC kbdc, int rate)
644 res = send_aux_command_and_data(kbdc, PSMC_SET_SAMPLING_RATE, rate);
645 VLOG(2, (LOG_DEBUG, "psm: SET_SAMPLING_RATE (%d) %04x\n", rate, res));
647 return ((res == PSM_ACK) ? rate : -1);
651 set_mouse_scaling(KBDC kbdc, int scale)
658 scale = PSMC_SET_SCALING11;
661 scale = PSMC_SET_SCALING21;
664 res = send_aux_command(kbdc, scale);
665 VLOG(2, (LOG_DEBUG, "psm: SET_SCALING%s return code:%04x\n",
666 (scale == PSMC_SET_SCALING21) ? "21" : "11", res));
668 return (res == PSM_ACK);
671 /* `val' must be 0 through PSMD_MAX_RESOLUTION */
673 set_mouse_resolution(KBDC kbdc, int val)
677 res = send_aux_command_and_data(kbdc, PSMC_SET_RESOLUTION, val);
678 VLOG(2, (LOG_DEBUG, "psm: SET_RESOLUTION (%d) %04x\n", val, res));
680 return ((res == PSM_ACK) ? val : -1);
684 * NOTE: once `set_mouse_mode()' is called, the mouse device must be
685 * re-enabled by calling `enable_aux_dev()'
688 set_mouse_mode(KBDC kbdc)
692 res = send_aux_command(kbdc, PSMC_SET_STREAM_MODE);
693 VLOG(2, (LOG_DEBUG, "psm: SET_STREAM_MODE return code:%04x\n", res));
695 return (res == PSM_ACK);
699 get_mouse_buttons(KBDC kbdc)
701 int c = 2; /* assume two buttons by default */
705 * NOTE: a special sequence to obtain Logitech Mouse specific
706 * information: set resolution to 25 ppi, set scaling to 1:1, set
707 * scaling to 1:1, set scaling to 1:1. Then the second byte of the
708 * mouse status bytes is the number of available buttons.
709 * Some manufactures also support this sequence.
711 if (set_mouse_resolution(kbdc, PSMD_RES_LOW) != PSMD_RES_LOW)
713 if (set_mouse_scaling(kbdc, 1) && set_mouse_scaling(kbdc, 1) &&
714 set_mouse_scaling(kbdc, 1) &&
715 get_mouse_status(kbdc, status, 0, 3) >= 3 && status[1] != 0)
720 /* misc subroutines */
722 * Someday, I will get the complete list of valid pointing devices and
729 static int valid_ids[] = {
730 PSM_MOUSE_ID, /* mouse */
731 PSM_BALLPOINT_ID, /* ballpoint device */
732 PSM_INTELLI_ID, /* Intellimouse */
733 PSM_EXPLORER_ID, /* Intellimouse Explorer */
734 -1 /* end of table */
738 for (i = 0; valid_ids[i] >= 0; ++i)
739 if (valid_ids[i] == id)
748 model_name(int model)
754 { MOUSE_MODEL_NETSCROLL, "NetScroll" },
755 { MOUSE_MODEL_NET, "NetMouse/NetScroll Optical" },
756 { MOUSE_MODEL_GLIDEPOINT, "GlidePoint" },
757 { MOUSE_MODEL_THINK, "ThinkingMouse" },
758 { MOUSE_MODEL_INTELLI, "IntelliMouse" },
759 { MOUSE_MODEL_MOUSEMANPLUS, "MouseMan+" },
760 { MOUSE_MODEL_VERSAPAD, "VersaPad" },
761 { MOUSE_MODEL_EXPLORER, "IntelliMouse Explorer" },
762 { MOUSE_MODEL_4D, "4D Mouse" },
763 { MOUSE_MODEL_4DPLUS, "4D+ Mouse" },
764 { MOUSE_MODEL_SYNAPTICS, "Synaptics Touchpad" },
765 { MOUSE_MODEL_TRACKPOINT, "IBM/Lenovo TrackPoint" },
766 { MOUSE_MODEL_GENERIC, "Generic PS/2 mouse" },
767 { MOUSE_MODEL_UNKNOWN, "Unknown" },
771 for (i = 0; models[i].model_code != MOUSE_MODEL_UNKNOWN; ++i)
772 if (models[i].model_code == model)
774 return (models[i].model_name);
778 recover_from_error(KBDC kbdc)
780 /* discard anything left in the output buffer */
781 empty_both_buffers(kbdc, 10);
785 * NOTE: KBDC_RESET_KBD may not restore the communication between the
786 * keyboard and the controller.
791 * NOTE: somehow diagnostic and keyboard port test commands bring the
794 if (!test_controller(kbdc))
795 log(LOG_ERR, "psm: keyboard controller failed.\n");
796 /* if there isn't a keyboard in the system, the following error is OK */
797 if (test_kbd_port(kbdc) != 0)
798 VLOG(1, (LOG_ERR, "psm: keyboard port failed.\n"));
803 restore_controller(KBDC kbdc, int command_byte)
805 empty_both_buffers(kbdc, 10);
807 if (!set_controller_command_byte(kbdc, 0xff, command_byte)) {
808 log(LOG_ERR, "psm: failed to restore the keyboard controller "
810 empty_both_buffers(kbdc, 10);
813 empty_both_buffers(kbdc, 10);
819 * Re-initialize the aux port and device. The aux port must be enabled
820 * and its interrupt must be disabled before calling this routine.
821 * The aux device will be disabled before returning.
822 * The keyboard controller must be locked via `kbdc_lock()' before
823 * calling this routine.
826 doinitialize(struct psm_softc *sc, mousemode_t *mode)
828 KBDC kbdc = sc->kbdc;
832 switch((i = test_aux_port(kbdc))) {
833 case 1: /* ignore these errors */
839 "psm%d: strange result for test aux port (%d).\n",
842 case 0: /* no error */
844 case -1: /* time out */
846 recover_from_error(kbdc);
847 if (sc->config & PSM_CONFIG_IGNPORTERROR)
849 log(LOG_ERR, "psm%d: the aux port is not functioning (%d).\n",
854 if (sc->config & PSM_CONFIG_NORESET) {
856 * Don't try to reset the pointing device. It may possibly
857 * be left in the unknown state, though...
861 * NOTE: some controllers appears to hang the `keyboard' when
862 * the aux port doesn't exist and `PSMC_RESET_DEV' is issued.
864 if (!reset_aux_dev(kbdc)) {
865 recover_from_error(kbdc);
866 log(LOG_ERR, "psm%d: failed to reset the aux device.\n",
873 * both the aux port and the aux device is functioning, see
874 * if the device can be enabled.
876 if (!enable_aux_dev(kbdc) || !disable_aux_dev(kbdc)) {
877 log(LOG_ERR, "psm%d: failed to enable the aux device.\n",
881 empty_both_buffers(kbdc, 10); /* remove stray data if any */
883 /* Re-enable the mouse. */
884 for (i = 0; vendortype[i].probefunc != NULL; ++i)
885 if (vendortype[i].model == sc->hw.model)
886 (*vendortype[i].probefunc)(sc, REINIT);
888 /* set mouse parameters */
889 if (mode != (mousemode_t *)NULL) {
891 mode->rate = set_mouse_sampling_rate(kbdc, mode->rate);
892 if (mode->resolution >= 0)
894 set_mouse_resolution(kbdc, mode->resolution);
895 set_mouse_scaling(kbdc, 1);
896 set_mouse_mode(kbdc);
899 /* Record sync on the next data packet we see. */
900 sc->flags |= PSM_NEED_SYNCBITS;
902 /* just check the status of the mouse */
903 if (get_mouse_status(kbdc, stat, 0, 3) < 3)
904 log(LOG_DEBUG, "psm%d: failed to get status (doinitialize).\n",
911 doopen(struct psm_softc *sc, int command_byte)
916 * FIXME: Synaptics TouchPad seems to go back to Relative Mode with
917 * no obvious reason. Thus we check the current mode and restore the
918 * Absolute Mode if it was cleared.
920 * The previous hack at the end of psmprobe() wasn't efficient when
921 * moused(8) was restarted.
923 * A Reset (FF) or Set Defaults (F6) command would clear the
924 * Absolute Mode bit. But a verbose boot or debug.psm.loglevel=5
925 * doesn't show any evidence of such a command.
927 if (sc->hw.model == MOUSE_MODEL_SYNAPTICS) {
928 mouse_ext_command(sc->kbdc, 1);
929 get_mouse_status(sc->kbdc, stat, 0, 3);
930 if ((SYNAPTICS_VERSION_GE(sc->synhw, 7, 5) ||
933 synaptics_set_mode(sc, synaptics_preferred_mode(sc));
934 VLOG(5, (LOG_DEBUG, "psm%d: Synaptis Absolute Mode "
935 "hopefully restored\n",
941 * A user may want to disable tap and drag gestures on a Synaptics
942 * TouchPad when it operates in Relative Mode.
944 if (sc->hw.model == MOUSE_MODEL_GENERIC) {
945 if (tap_enabled > 0) {
947 * Enable tap & drag gestures. We use a Mode Byte
948 * and clear the DisGest bit (see §2.5 of Synaptics
949 * TouchPad Interfacing Guide).
952 "psm%d: enable tap and drag gestures\n",
954 mouse_ext_command(sc->kbdc, 0x00);
955 set_mouse_sampling_rate(sc->kbdc, 20);
956 } else if (tap_enabled == 0) {
958 * Disable tap & drag gestures. We use a Mode Byte
959 * and set the DisGest bit (see §2.5 of Synaptics
960 * TouchPad Interfacing Guide).
963 "psm%d: disable tap and drag gestures\n",
965 mouse_ext_command(sc->kbdc, 0x04);
966 set_mouse_sampling_rate(sc->kbdc, 20);
970 /* enable the mouse device */
971 if (!enable_aux_dev(sc->kbdc)) {
972 /* MOUSE ERROR: failed to enable the mouse because:
973 * 1) the mouse is faulty,
974 * 2) the mouse has been removed(!?)
975 * In the latter case, the keyboard may have hung, and need
976 * recovery procedure...
978 recover_from_error(sc->kbdc);
980 /* FIXME: we could reset the mouse here and try to enable
981 * it again. But it will take long time and it's not a good
982 * idea to disable the keyboard that long...
984 if (!doinitialize(sc, &sc->mode) || !enable_aux_dev(sc->kbdc)) {
985 recover_from_error(sc->kbdc);
989 restore_controller(sc->kbdc, command_byte);
990 /* mark this device is no longer available */
991 sc->state &= ~PSM_VALID;
993 "psm%d: failed to enable the device (doopen).\n",
999 if (get_mouse_status(sc->kbdc, stat, 0, 3) < 3)
1000 log(LOG_DEBUG, "psm%d: failed to get status (doopen).\n",
1003 /* enable the aux port and interrupt */
1004 if (!set_controller_command_byte(sc->kbdc,
1005 kbdc_get_device_mask(sc->kbdc),
1006 (command_byte & KBD_KBD_CONTROL_BITS) |
1007 KBD_ENABLE_AUX_PORT | KBD_ENABLE_AUX_INT)) {
1008 /* CONTROLLER ERROR */
1009 disable_aux_dev(sc->kbdc);
1010 restore_controller(sc->kbdc, command_byte);
1012 "psm%d: failed to enable the aux interrupt (doopen).\n",
1017 /* start the watchdog timer */
1018 sc->watchdog = FALSE;
1019 callout_reset(&sc->callout, hz * 2, psmtimeout, sc);
1025 reinitialize(struct psm_softc *sc, int doinit)
1031 /* don't let anybody mess with the aux device */
1032 if (!kbdc_lock(sc->kbdc, TRUE))
1036 /* block our watchdog timer */
1037 sc->watchdog = FALSE;
1038 callout_stop(&sc->callout);
1040 /* save the current controller command byte */
1041 empty_both_buffers(sc->kbdc, 10);
1042 c = get_controller_command_byte(sc->kbdc);
1044 "psm%d: current command byte: %04x (reinitialize).\n",
1047 /* enable the aux port but disable the aux interrupt and the keyboard */
1048 if ((c == -1) || !set_controller_command_byte(sc->kbdc,
1049 kbdc_get_device_mask(sc->kbdc),
1050 KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT |
1051 KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
1052 /* CONTROLLER ERROR */
1054 kbdc_lock(sc->kbdc, FALSE);
1056 "psm%d: unable to set the command byte (reinitialize).\n",
1061 /* flush any data */
1062 if (sc->state & PSM_VALID) {
1063 /* this may fail; but never mind... */
1064 disable_aux_dev(sc->kbdc);
1065 empty_aux_buffer(sc->kbdc, 10);
1070 memset(&sc->lastinputerr, 0, sizeof(sc->lastinputerr));
1072 /* try to detect the aux device; are you still there? */
1075 if (doinitialize(sc, &sc->mode)) {
1077 sc->state |= PSM_VALID;
1079 /* the device has gone! */
1080 restore_controller(sc->kbdc, c);
1081 sc->state &= ~PSM_VALID;
1083 "psm%d: the aux device has gone! (reinitialize).\n",
1090 /* restore the driver state */
1091 if ((sc->state & PSM_OPEN) && (err == 0)) {
1092 /* enable the aux device and the port again */
1093 err = doopen(sc, c);
1095 log(LOG_ERR, "psm%d: failed to enable the device "
1096 "(reinitialize).\n", sc->unit);
1098 /* restore the keyboard port and disable the aux port */
1099 if (!set_controller_command_byte(sc->kbdc,
1100 kbdc_get_device_mask(sc->kbdc),
1101 (c & KBD_KBD_CONTROL_BITS) |
1102 KBD_DISABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
1103 /* CONTROLLER ERROR */
1104 log(LOG_ERR, "psm%d: failed to disable the aux port "
1105 "(reinitialize).\n", sc->unit);
1110 kbdc_lock(sc->kbdc, FALSE);
1114 /* psm driver entry points */
1117 psmidentify(driver_t *driver, device_t parent)
1124 unit = device_get_unit(parent);
1126 /* always add at least one child */
1127 psm = BUS_ADD_CHILD(parent, KBDC_RID_AUX, driver->name, unit);
1131 irq = bus_get_resource_start(psm, SYS_RES_IRQ, KBDC_RID_AUX);
1136 * If the PS/2 mouse device has already been reported by ACPI or
1137 * PnP BIOS, obtain the IRQ resource from it.
1138 * (See psmcpnp_attach() below.)
1140 psmc = device_find_child(device_get_parent(parent),
1141 PSMCPNP_DRIVER_NAME, unit);
1144 irq = bus_get_resource_start(psmc, SYS_RES_IRQ, 0);
1147 bus_delete_resource(psmc, SYS_RES_IRQ, 0);
1148 bus_set_resource(psm, SYS_RES_IRQ, KBDC_RID_AUX, irq, 1);
1151 #define endprobe(v) do { \
1154 kbdc_set_device_mask(sc->kbdc, mask); \
1155 kbdc_lock(sc->kbdc, FALSE); \
1160 psmprobe(device_t dev)
1162 int unit = device_get_unit(dev);
1163 struct psm_softc *sc = device_get_softc(dev);
1174 /* see if IRQ is available */
1176 sc->intr = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE);
1177 if (sc->intr == NULL) {
1179 device_printf(dev, "unable to allocate IRQ\n");
1182 bus_release_resource(dev, SYS_RES_IRQ, rid, sc->intr);
1185 sc->kbdc = atkbdc_open(device_get_unit(device_get_parent(dev)));
1186 sc->config = device_get_flags(dev) & PSM_CONFIG_FLAGS;
1187 /* XXX: for backward compatibility */
1188 #if defined(PSM_HOOKRESUME) || defined(PSM_HOOKAPM)
1190 #ifdef PSM_RESETAFTERSUSPEND
1191 PSM_CONFIG_INITAFTERSUSPEND;
1193 PSM_CONFIG_HOOKRESUME;
1195 #endif /* PSM_HOOKRESUME | PSM_HOOKAPM */
1200 device_set_desc(dev, "PS/2 Mouse");
1202 if (!kbdc_lock(sc->kbdc, TRUE)) {
1203 printf("psm%d: unable to lock the controller.\n", unit);
1210 * NOTE: two bits in the command byte controls the operation of the
1211 * aux port (mouse port): the aux port disable bit (bit 5) and the aux
1212 * port interrupt (IRQ 12) enable bit (bit 2).
1215 /* discard anything left after the keyboard initialization */
1216 empty_both_buffers(sc->kbdc, 10);
1218 /* save the current command byte; it will be used later */
1219 mask = kbdc_get_device_mask(sc->kbdc) & ~KBD_AUX_CONTROL_BITS;
1220 command_byte = get_controller_command_byte(sc->kbdc);
1222 printf("psm%d: current command byte:%04x\n", unit,
1224 if (command_byte == -1) {
1225 /* CONTROLLER ERROR */
1226 printf("psm%d: unable to get the current command byte value.\n",
1232 * disable the keyboard port while probing the aux port, which must be
1233 * enabled during this routine
1235 if (!set_controller_command_byte(sc->kbdc,
1236 KBD_KBD_CONTROL_BITS | KBD_AUX_CONTROL_BITS,
1237 KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT |
1238 KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
1240 * this is CONTROLLER ERROR; I don't know how to recover
1241 * from this error...
1243 if (ALWAYS_RESTORE_CONTROLLER(sc->kbdc))
1244 restore_controller(sc->kbdc, command_byte);
1245 printf("psm%d: unable to set the command byte.\n", unit);
1248 write_controller_command(sc->kbdc, KBDC_ENABLE_AUX_PORT);
1251 * NOTE: `test_aux_port()' is designed to return with zero if the aux
1252 * port exists and is functioning. However, some controllers appears
1253 * to respond with zero even when the aux port doesn't exist. (It may
1254 * be that this is only the case when the controller DOES have the aux
1255 * port but the port is not wired on the motherboard.) The keyboard
1256 * controllers without the port, such as the original AT, are
1257 * supposed to return with an error code or simply time out. In any
1258 * case, we have to continue probing the port even when the controller
1261 * XXX: some controllers erroneously return the error code 1, 2 or 3
1262 * when it has a perfectly functional aux port. We have to ignore
1263 * this error code. Even if the controller HAS error with the aux
1264 * port, it will be detected later...
1265 * XXX: another incompatible controller returns PSM_ACK (0xfa)...
1267 switch ((i = test_aux_port(sc->kbdc))) {
1268 case 1: /* ignore these errors */
1273 printf("psm%d: strange result for test aux port "
1274 "(%d).\n", unit, i);
1276 case 0: /* no error */
1278 case -1: /* time out */
1279 default: /* error */
1280 recover_from_error(sc->kbdc);
1281 if (sc->config & PSM_CONFIG_IGNPORTERROR)
1283 if (ALWAYS_RESTORE_CONTROLLER(sc->kbdc))
1284 restore_controller(sc->kbdc, command_byte);
1286 printf("psm%d: the aux port is not functioning (%d).\n",
1291 if (sc->config & PSM_CONFIG_NORESET) {
1293 * Don't try to reset the pointing device. It may possibly be
1294 * left in an unknown state, though...
1298 * NOTE: some controllers appears to hang the `keyboard' when
1299 * the aux port doesn't exist and `PSMC_RESET_DEV' is issued.
1301 * Attempt to reset the controller twice -- this helps
1302 * pierce through some KVM switches. The second reset
1305 if (!reset_aux_dev(sc->kbdc)) {
1306 recover_from_error(sc->kbdc);
1307 if (ALWAYS_RESTORE_CONTROLLER(sc->kbdc))
1308 restore_controller(sc->kbdc, command_byte);
1310 printf("psm%d: failed to reset the aux "
1313 } else if (!reset_aux_dev(sc->kbdc)) {
1314 recover_from_error(sc->kbdc);
1316 printf("psm%d: failed to reset the aux device "
1322 * both the aux port and the aux device are functioning, see if the
1323 * device can be enabled. NOTE: when enabled, the device will start
1324 * sending data; we shall immediately disable the device once we know
1325 * the device can be enabled.
1327 if (!enable_aux_dev(sc->kbdc) || !disable_aux_dev(sc->kbdc)) {
1329 recover_from_error(sc->kbdc);
1330 if (ALWAYS_RESTORE_CONTROLLER(sc->kbdc))
1331 restore_controller(sc->kbdc, command_byte);
1333 printf("psm%d: failed to enable the aux device.\n",
1338 /* save the default values after reset */
1339 if (get_mouse_status(sc->kbdc, stat, 0, 3) >= 3) {
1340 sc->dflt_mode.rate = sc->mode.rate = stat[2];
1341 sc->dflt_mode.resolution = sc->mode.resolution = stat[1];
1343 sc->dflt_mode.rate = sc->mode.rate = -1;
1344 sc->dflt_mode.resolution = sc->mode.resolution = -1;
1347 /* hardware information */
1348 sc->hw.iftype = MOUSE_IF_PS2;
1350 /* verify the device is a mouse */
1351 sc->hw.hwid = get_aux_id(sc->kbdc);
1352 if (!is_a_mouse(sc->hw.hwid)) {
1353 if (ALWAYS_RESTORE_CONTROLLER(sc->kbdc))
1354 restore_controller(sc->kbdc, command_byte);
1356 printf("psm%d: unknown device type (%d).\n", unit,
1360 switch (sc->hw.hwid) {
1361 case PSM_BALLPOINT_ID:
1362 sc->hw.type = MOUSE_TRACKBALL;
1365 case PSM_INTELLI_ID:
1366 case PSM_EXPLORER_ID:
1367 case PSM_4DMOUSE_ID:
1369 sc->hw.type = MOUSE_MOUSE;
1372 sc->hw.type = MOUSE_UNKNOWN;
1376 if (sc->config & PSM_CONFIG_NOIDPROBE) {
1378 i = GENERIC_MOUSE_ENTRY;
1381 sc->hw.buttons = get_mouse_buttons(sc->kbdc);
1383 /* other parameters */
1384 for (i = 0; vendortype[i].probefunc != NULL; ++i)
1385 if ((*vendortype[i].probefunc)(sc, PROBE)) {
1387 printf("psm%d: found %s\n", unit,
1388 model_name(vendortype[i].model));
1393 sc->hw.model = vendortype[i].model;
1395 sc->dflt_mode.level = PSM_LEVEL_BASE;
1396 sc->dflt_mode.packetsize = MOUSE_PS2_PACKETSIZE;
1397 sc->dflt_mode.accelfactor = (sc->config & PSM_CONFIG_ACCEL) >> 4;
1398 if (sc->config & PSM_CONFIG_NOCHECKSYNC)
1399 sc->dflt_mode.syncmask[0] = 0;
1401 sc->dflt_mode.syncmask[0] = vendortype[i].syncmask;
1402 if (sc->config & PSM_CONFIG_FORCETAP)
1403 sc->dflt_mode.syncmask[0] &= ~MOUSE_PS2_TAP;
1404 sc->dflt_mode.syncmask[1] = 0; /* syncbits */
1405 sc->mode = sc->dflt_mode;
1406 sc->mode.packetsize = vendortype[i].packetsize;
1408 /* set mouse parameters */
1411 * A version of Logitech FirstMouse+ won't report wheel movement,
1412 * if SET_DEFAULTS is sent... Don't use this command.
1413 * This fix was found by Takashi Nishida.
1415 i = send_aux_command(sc->kbdc, PSMC_SET_DEFAULTS);
1417 printf("psm%d: SET_DEFAULTS return code:%04x\n", unit, i);
1419 if (sc->config & PSM_CONFIG_RESOLUTION)
1420 sc->mode.resolution =
1421 set_mouse_resolution(sc->kbdc,
1422 (sc->config & PSM_CONFIG_RESOLUTION) - 1);
1423 else if (sc->mode.resolution >= 0)
1424 sc->mode.resolution =
1425 set_mouse_resolution(sc->kbdc, sc->dflt_mode.resolution);
1426 if (sc->mode.rate > 0)
1428 set_mouse_sampling_rate(sc->kbdc, sc->dflt_mode.rate);
1429 set_mouse_scaling(sc->kbdc, 1);
1431 /* Record sync on the next data packet we see. */
1432 sc->flags |= PSM_NEED_SYNCBITS;
1434 /* just check the status of the mouse */
1436 * NOTE: XXX there are some arcane controller/mouse combinations out
1437 * there, which hung the controller unless there is data transmission
1438 * after ACK from the mouse.
1440 if (get_mouse_status(sc->kbdc, stat, 0, 3) < 3)
1441 printf("psm%d: failed to get status.\n", unit);
1444 * When in its native mode, some mice operate with different
1445 * default parameters than in the PS/2 compatible mode.
1447 sc->dflt_mode.rate = sc->mode.rate = stat[2];
1448 sc->dflt_mode.resolution = sc->mode.resolution = stat[1];
1451 /* disable the aux port for now... */
1452 if (!set_controller_command_byte(sc->kbdc,
1453 KBD_KBD_CONTROL_BITS | KBD_AUX_CONTROL_BITS,
1454 (command_byte & KBD_KBD_CONTROL_BITS) |
1455 KBD_DISABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
1457 * this is CONTROLLER ERROR; I don't know the proper way to
1458 * recover from this error...
1460 if (ALWAYS_RESTORE_CONTROLLER(sc->kbdc))
1461 restore_controller(sc->kbdc, command_byte);
1462 printf("psm%d: unable to set the command byte.\n", unit);
1467 kbdc_set_device_mask(sc->kbdc, mask | KBD_AUX_CONTROL_BITS);
1468 kbdc_lock(sc->kbdc, FALSE);
1473 psmattach(device_t dev)
1475 int unit = device_get_unit(dev);
1476 struct psm_softc *sc = device_get_softc(dev);
1480 /* Setup initial state */
1481 sc->state = PSM_VALID;
1482 callout_init(&sc->callout, 0);
1483 callout_init(&sc->softcallout, 0);
1485 /* Setup our interrupt handler */
1487 sc->intr = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE);
1488 if (sc->intr == NULL)
1490 error = bus_setup_intr(dev, sc->intr, INTR_TYPE_TTY, NULL, psmintr, sc,
1493 bus_release_resource(dev, SYS_RES_IRQ, rid, sc->intr);
1498 sc->dev = make_dev(&psm_cdevsw, 0, 0, 0, 0666, "psm%d", unit);
1499 sc->dev->si_drv1 = sc;
1500 sc->bdev = make_dev(&psm_cdevsw, 0, 0, 0, 0666, "bpsm%d", unit);
1501 sc->bdev->si_drv1 = sc;
1503 /* Some touchpad devices need full reinitialization after suspend. */
1504 switch (sc->hw.model) {
1505 case MOUSE_MODEL_SYNAPTICS:
1506 case MOUSE_MODEL_GLIDEPOINT:
1507 case MOUSE_MODEL_VERSAPAD:
1508 sc->config |= PSM_CONFIG_INITAFTERSUSPEND;
1511 if (sc->synhw.infoMajor >= 4 || sc->tphw > 0)
1512 sc->config |= PSM_CONFIG_INITAFTERSUSPEND;
1517 printf("psm%d: model %s, device ID %d\n",
1518 unit, model_name(sc->hw.model), sc->hw.hwid & 0x00ff);
1520 printf("psm%d: model %s, device ID %d-%02x, %d buttons\n",
1521 unit, model_name(sc->hw.model), sc->hw.hwid & 0x00ff,
1522 sc->hw.hwid >> 8, sc->hw.buttons);
1523 printf("psm%d: config:%08x, flags:%08x, packet size:%d\n",
1524 unit, sc->config, sc->flags, sc->mode.packetsize);
1525 printf("psm%d: syncmask:%02x, syncbits:%02x\n",
1526 unit, sc->mode.syncmask[0], sc->mode.syncmask[1]);
1536 psmdetach(device_t dev)
1538 struct psm_softc *sc;
1541 sc = device_get_softc(dev);
1542 if (sc->state & PSM_OPEN)
1546 bus_teardown_intr(dev, sc->intr, sc->ih);
1547 bus_release_resource(dev, SYS_RES_IRQ, rid, sc->intr);
1549 destroy_dev(sc->dev);
1550 destroy_dev(sc->bdev);
1552 callout_drain(&sc->callout);
1553 callout_drain(&sc->softcallout);
1559 psmopen(struct cdev *dev, int flag, int fmt, struct thread *td)
1561 struct psm_softc *sc;
1566 /* Get device data */
1568 if ((sc == NULL) || (sc->state & PSM_VALID) == 0) {
1569 /* the device is no longer valid/functioning */
1573 /* Disallow multiple opens */
1574 if (sc->state & PSM_OPEN)
1577 device_busy(devclass_get_device(psm_devclass, sc->unit));
1579 /* Initialize state */
1580 sc->mode.level = sc->dflt_mode.level;
1581 sc->mode.protocol = sc->dflt_mode.protocol;
1582 sc->watchdog = FALSE;
1585 /* flush the event queue */
1586 sc->queue.count = 0;
1589 sc->status.flags = 0;
1590 sc->status.button = 0;
1591 sc->status.obutton = 0;
1596 sc->pqueue_start = 0;
1599 /* empty input buffer */
1604 /* don't let timeout routines in the keyboard driver to poll the kbdc */
1605 if (!kbdc_lock(sc->kbdc, TRUE))
1608 /* save the current controller command byte */
1610 command_byte = get_controller_command_byte(sc->kbdc);
1612 /* enable the aux port and temporalily disable the keyboard */
1613 if (command_byte == -1 || !set_controller_command_byte(sc->kbdc,
1614 kbdc_get_device_mask(sc->kbdc),
1615 KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT |
1616 KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
1617 /* CONTROLLER ERROR; do you know how to get out of this? */
1618 kbdc_lock(sc->kbdc, FALSE);
1621 "psm%d: unable to set the command byte (psmopen).\n",
1626 * Now that the keyboard controller is told not to generate
1627 * the keyboard and mouse interrupts, call `splx()' to allow
1628 * the other tty interrupts. The clock interrupt may also occur,
1629 * but timeout routines will be blocked by the poll flag set
1634 /* enable the mouse device */
1635 err = doopen(sc, command_byte);
1639 sc->state |= PSM_OPEN;
1640 kbdc_lock(sc->kbdc, FALSE);
1645 psmclose(struct cdev *dev, int flag, int fmt, struct thread *td)
1647 struct psm_softc *sc = dev->si_drv1;
1652 /* don't let timeout routines in the keyboard driver to poll the kbdc */
1653 if (!kbdc_lock(sc->kbdc, TRUE))
1656 /* save the current controller command byte */
1658 command_byte = get_controller_command_byte(sc->kbdc);
1659 if (command_byte == -1) {
1660 kbdc_lock(sc->kbdc, FALSE);
1665 /* disable the aux interrupt and temporalily disable the keyboard */
1666 if (!set_controller_command_byte(sc->kbdc,
1667 kbdc_get_device_mask(sc->kbdc),
1668 KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT |
1669 KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
1671 "psm%d: failed to disable the aux int (psmclose).\n",
1673 /* CONTROLLER ERROR;
1674 * NOTE: we shall force our way through. Because the only
1675 * ill effect we shall see is that we may not be able
1676 * to read ACK from the mouse, and it doesn't matter much
1677 * so long as the mouse will accept the DISABLE command.
1682 /* stop the watchdog timer */
1683 callout_stop(&sc->callout);
1685 /* remove anything left in the output buffer */
1686 empty_aux_buffer(sc->kbdc, 10);
1688 /* disable the aux device, port and interrupt */
1689 if (sc->state & PSM_VALID) {
1690 if (!disable_aux_dev(sc->kbdc)) {
1692 * NOTE: we don't return (error) and continue,
1693 * pretending we have successfully disabled the device.
1694 * It's OK because the interrupt routine will discard
1695 * any data from the mouse hereafter.
1698 "psm%d: failed to disable the device (psmclose).\n",
1702 if (get_mouse_status(sc->kbdc, stat, 0, 3) < 3)
1704 "psm%d: failed to get status (psmclose).\n",
1708 if (!set_controller_command_byte(sc->kbdc,
1709 kbdc_get_device_mask(sc->kbdc),
1710 (command_byte & KBD_KBD_CONTROL_BITS) |
1711 KBD_DISABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
1714 * we shall ignore this error; see the above comment.
1717 "psm%d: failed to disable the aux port (psmclose).\n",
1721 /* remove anything left in the output buffer */
1722 empty_aux_buffer(sc->kbdc, 10);
1724 /* clean up and sigio requests */
1725 if (sc->async != NULL) {
1726 funsetown(&sc->async);
1730 /* close is almost always successful */
1731 sc->state &= ~PSM_OPEN;
1732 kbdc_lock(sc->kbdc, FALSE);
1733 device_unbusy(devclass_get_device(psm_devclass, sc->unit));
1738 tame_mouse(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *status,
1741 static u_char butmapps2[8] = {
1743 MOUSE_PS2_BUTTON1DOWN,
1744 MOUSE_PS2_BUTTON2DOWN,
1745 MOUSE_PS2_BUTTON1DOWN | MOUSE_PS2_BUTTON2DOWN,
1746 MOUSE_PS2_BUTTON3DOWN,
1747 MOUSE_PS2_BUTTON1DOWN | MOUSE_PS2_BUTTON3DOWN,
1748 MOUSE_PS2_BUTTON2DOWN | MOUSE_PS2_BUTTON3DOWN,
1749 MOUSE_PS2_BUTTON1DOWN | MOUSE_PS2_BUTTON2DOWN |
1750 MOUSE_PS2_BUTTON3DOWN,
1752 static u_char butmapmsc[8] = {
1753 MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON2UP |
1754 MOUSE_MSC_BUTTON3UP,
1755 MOUSE_MSC_BUTTON2UP | MOUSE_MSC_BUTTON3UP,
1756 MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON3UP,
1757 MOUSE_MSC_BUTTON3UP,
1758 MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON2UP,
1759 MOUSE_MSC_BUTTON2UP,
1760 MOUSE_MSC_BUTTON1UP,
1766 if (sc->mode.level == PSM_LEVEL_BASE) {
1767 mapped = status->button & ~MOUSE_BUTTON4DOWN;
1768 if (status->button & MOUSE_BUTTON4DOWN)
1769 mapped |= MOUSE_BUTTON1DOWN;
1770 status->button = mapped;
1771 buf[0] = MOUSE_PS2_SYNC | butmapps2[mapped & MOUSE_STDBUTTONS];
1772 i = imax(imin(status->dx, 255), -256);
1774 buf[0] |= MOUSE_PS2_XNEG;
1776 i = imax(imin(status->dy, 255), -256);
1778 buf[0] |= MOUSE_PS2_YNEG;
1780 return (MOUSE_PS2_PACKETSIZE);
1781 } else if (sc->mode.level == PSM_LEVEL_STANDARD) {
1782 buf[0] = MOUSE_MSC_SYNC |
1783 butmapmsc[status->button & MOUSE_STDBUTTONS];
1784 i = imax(imin(status->dx, 255), -256);
1786 buf[3] = i - buf[1];
1787 i = imax(imin(status->dy, 255), -256);
1789 buf[4] = i - buf[2];
1790 i = imax(imin(status->dz, 127), -128);
1791 buf[5] = (i >> 1) & 0x7f;
1792 buf[6] = (i - (i >> 1)) & 0x7f;
1793 buf[7] = (~status->button >> 3) & 0x7f;
1794 return (MOUSE_SYS_PACKETSIZE);
1796 return (pb->inputbytes);
1800 psmread(struct cdev *dev, struct uio *uio, int flag)
1802 struct psm_softc *sc = dev->si_drv1;
1803 u_char buf[PSM_SMALLBUFSIZE];
1808 if ((sc->state & PSM_VALID) == 0)
1811 /* block until mouse activity occured */
1813 while (sc->queue.count <= 0) {
1814 if (dev != sc->bdev) {
1816 return (EWOULDBLOCK);
1818 sc->state |= PSM_ASLP;
1819 error = tsleep(sc, PZERO | PCATCH, "psmrea", 0);
1820 sc->state &= ~PSM_ASLP;
1824 } else if ((sc->state & PSM_VALID) == 0) {
1825 /* the device disappeared! */
1832 /* copy data to the user land */
1833 while ((sc->queue.count > 0) && (uio->uio_resid > 0)) {
1835 l = imin(sc->queue.count, uio->uio_resid);
1836 if (l > sizeof(buf))
1838 if (l > sizeof(sc->queue.buf) - sc->queue.head) {
1839 bcopy(&sc->queue.buf[sc->queue.head], &buf[0],
1840 sizeof(sc->queue.buf) - sc->queue.head);
1841 bcopy(&sc->queue.buf[0],
1842 &buf[sizeof(sc->queue.buf) - sc->queue.head],
1843 l - (sizeof(sc->queue.buf) - sc->queue.head));
1845 bcopy(&sc->queue.buf[sc->queue.head], &buf[0], l);
1846 sc->queue.count -= l;
1847 sc->queue.head = (sc->queue.head + l) % sizeof(sc->queue.buf);
1849 error = uiomove(buf, l, uio);
1858 block_mouse_data(struct psm_softc *sc, int *c)
1862 if (!kbdc_lock(sc->kbdc, TRUE))
1866 *c = get_controller_command_byte(sc->kbdc);
1867 if ((*c == -1) || !set_controller_command_byte(sc->kbdc,
1868 kbdc_get_device_mask(sc->kbdc),
1869 KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT |
1870 KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
1871 /* this is CONTROLLER ERROR */
1873 kbdc_lock(sc->kbdc, FALSE);
1878 * The device may be in the middle of status data transmission.
1879 * The transmission will be interrupted, thus, incomplete status
1880 * data must be discarded. Although the aux interrupt is disabled
1881 * at the keyboard controller level, at most one aux interrupt
1882 * may have already been pending and a data byte is in the
1883 * output buffer; throw it away. Note that the second argument
1884 * to `empty_aux_buffer()' is zero, so that the call will just
1885 * flush the internal queue.
1886 * `psmintr()' will be invoked after `splx()' if an interrupt is
1887 * pending; it will see no data and returns immediately.
1889 empty_aux_buffer(sc->kbdc, 0); /* flush the queue */
1890 read_aux_data_no_wait(sc->kbdc); /* throw away data if any */
1898 dropqueue(struct psm_softc *sc)
1901 sc->queue.count = 0;
1904 if ((sc->state & PSM_SOFTARMED) != 0) {
1905 sc->state &= ~PSM_SOFTARMED;
1906 callout_stop(&sc->softcallout);
1908 sc->pqueue_start = sc->pqueue_end;
1912 flushpackets(struct psm_softc *sc)
1916 bzero(&sc->pqueue, sizeof(sc->pqueue));
1920 unblock_mouse_data(struct psm_softc *sc, int c)
1925 * We may have seen a part of status data during `set_mouse_XXX()'.
1926 * they have been queued; flush it.
1928 empty_aux_buffer(sc->kbdc, 0);
1930 /* restore ports and interrupt */
1931 if (!set_controller_command_byte(sc->kbdc,
1932 kbdc_get_device_mask(sc->kbdc),
1933 c & (KBD_KBD_CONTROL_BITS | KBD_AUX_CONTROL_BITS))) {
1935 * CONTROLLER ERROR; this is serious, we may have
1936 * been left with the inaccessible keyboard and
1937 * the disabled mouse interrupt.
1942 kbdc_lock(sc->kbdc, FALSE);
1947 psmwrite(struct cdev *dev, struct uio *uio, int flag)
1949 struct psm_softc *sc = dev->si_drv1;
1950 u_char buf[PSM_SMALLBUFSIZE];
1951 int error = 0, i, l;
1953 if ((sc->state & PSM_VALID) == 0)
1956 if (sc->mode.level < PSM_LEVEL_NATIVE)
1959 /* copy data from the user land */
1960 while (uio->uio_resid > 0) {
1961 l = imin(PSM_SMALLBUFSIZE, uio->uio_resid);
1962 error = uiomove(buf, l, uio);
1965 for (i = 0; i < l; i++) {
1966 VLOG(4, (LOG_DEBUG, "psm: cmd 0x%x\n", buf[i]));
1967 if (!write_aux_command(sc->kbdc, buf[i])) {
1969 "psm: cmd 0x%x failed.\n", buf[i]));
1970 return (reinitialize(sc, FALSE));
1979 psmioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag,
1982 struct psm_softc *sc = dev->si_drv1;
1984 mousestatus_t status;
1985 #if (defined(MOUSE_GETVARS))
1994 /* Perform IOCTL command */
1997 case OLD_MOUSE_GETHWINFO:
1999 ((old_mousehw_t *)addr)->buttons = sc->hw.buttons;
2000 ((old_mousehw_t *)addr)->iftype = sc->hw.iftype;
2001 ((old_mousehw_t *)addr)->type = sc->hw.type;
2002 ((old_mousehw_t *)addr)->hwid = sc->hw.hwid & 0x00ff;
2006 case MOUSE_GETHWINFO:
2008 *(mousehw_t *)addr = sc->hw;
2009 if (sc->mode.level == PSM_LEVEL_BASE)
2010 ((mousehw_t *)addr)->model = MOUSE_MODEL_GENERIC;
2014 case MOUSE_SYN_GETHWINFO:
2016 if (sc->synhw.infoMajor >= 4)
2017 *(synapticshw_t *)addr = sc->synhw;
2023 case OLD_MOUSE_GETMODE:
2025 switch (sc->mode.level) {
2026 case PSM_LEVEL_BASE:
2027 ((old_mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2;
2029 case PSM_LEVEL_STANDARD:
2030 ((old_mousemode_t *)addr)->protocol =
2031 MOUSE_PROTO_SYSMOUSE;
2033 case PSM_LEVEL_NATIVE:
2034 ((old_mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2;
2037 ((old_mousemode_t *)addr)->rate = sc->mode.rate;
2038 ((old_mousemode_t *)addr)->resolution = sc->mode.resolution;
2039 ((old_mousemode_t *)addr)->accelfactor = sc->mode.accelfactor;
2045 *(mousemode_t *)addr = sc->mode;
2046 if ((sc->flags & PSM_NEED_SYNCBITS) != 0) {
2047 ((mousemode_t *)addr)->syncmask[0] = 0;
2048 ((mousemode_t *)addr)->syncmask[1] = 0;
2050 ((mousemode_t *)addr)->resolution =
2051 MOUSE_RES_LOW - sc->mode.resolution;
2052 switch (sc->mode.level) {
2053 case PSM_LEVEL_BASE:
2054 ((mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2;
2055 ((mousemode_t *)addr)->packetsize =
2056 MOUSE_PS2_PACKETSIZE;
2058 case PSM_LEVEL_STANDARD:
2059 ((mousemode_t *)addr)->protocol = MOUSE_PROTO_SYSMOUSE;
2060 ((mousemode_t *)addr)->packetsize =
2061 MOUSE_SYS_PACKETSIZE;
2062 ((mousemode_t *)addr)->syncmask[0] = MOUSE_SYS_SYNCMASK;
2063 ((mousemode_t *)addr)->syncmask[1] = MOUSE_SYS_SYNC;
2065 case PSM_LEVEL_NATIVE:
2066 /* FIXME: this isn't quite correct... XXX */
2067 ((mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2;
2073 case OLD_MOUSE_SETMODE:
2075 if (cmd == OLD_MOUSE_SETMODE) {
2076 mode.rate = ((old_mousemode_t *)addr)->rate;
2078 * resolution old I/F new I/F
2085 if (((old_mousemode_t *)addr)->resolution > 0)
2087 -((old_mousemode_t *)addr)->resolution - 1;
2089 mode.resolution = 0;
2091 ((old_mousemode_t *)addr)->accelfactor;
2094 mode = *(mousemode_t *)addr;
2096 /* adjust and validate parameters. */
2097 if (mode.rate > UCHAR_MAX)
2100 mode.rate = sc->dflt_mode.rate;
2101 else if (mode.rate == -1)
2102 /* don't change the current setting */
2104 else if (mode.rate < 0)
2106 if (mode.resolution >= UCHAR_MAX)
2108 if (mode.resolution >= 200)
2109 mode.resolution = MOUSE_RES_HIGH;
2110 else if (mode.resolution >= 100)
2111 mode.resolution = MOUSE_RES_MEDIUMHIGH;
2112 else if (mode.resolution >= 50)
2113 mode.resolution = MOUSE_RES_MEDIUMLOW;
2114 else if (mode.resolution > 0)
2115 mode.resolution = MOUSE_RES_LOW;
2116 if (mode.resolution == MOUSE_RES_DEFAULT)
2117 mode.resolution = sc->dflt_mode.resolution;
2118 else if (mode.resolution == -1)
2119 /* don't change the current setting */
2121 else if (mode.resolution < 0) /* MOUSE_RES_LOW/MEDIUM/HIGH */
2122 mode.resolution = MOUSE_RES_LOW - mode.resolution;
2123 if (mode.level == -1)
2124 /* don't change the current setting */
2125 mode.level = sc->mode.level;
2126 else if ((mode.level < PSM_LEVEL_MIN) ||
2127 (mode.level > PSM_LEVEL_MAX))
2129 if (mode.accelfactor == -1)
2130 /* don't change the current setting */
2131 mode.accelfactor = sc->mode.accelfactor;
2132 else if (mode.accelfactor < 0)
2135 /* don't allow anybody to poll the keyboard controller */
2136 error = block_mouse_data(sc, &command_byte);
2140 /* set mouse parameters */
2142 mode.rate = set_mouse_sampling_rate(sc->kbdc,
2144 if (mode.resolution >= 0)
2146 set_mouse_resolution(sc->kbdc, mode.resolution);
2147 set_mouse_scaling(sc->kbdc, 1);
2148 get_mouse_status(sc->kbdc, stat, 0, 3);
2151 sc->mode.rate = mode.rate;
2152 sc->mode.resolution = mode.resolution;
2153 sc->mode.accelfactor = mode.accelfactor;
2154 sc->mode.level = mode.level;
2157 unblock_mouse_data(sc, command_byte);
2160 case MOUSE_GETLEVEL:
2161 *(int *)addr = sc->mode.level;
2164 case MOUSE_SETLEVEL:
2165 if ((*(int *)addr < PSM_LEVEL_MIN) ||
2166 (*(int *)addr > PSM_LEVEL_MAX))
2168 sc->mode.level = *(int *)addr;
2170 if (sc->hw.model == MOUSE_MODEL_SYNAPTICS) {
2172 * If we are entering PSM_LEVEL_NATIVE, we want to
2173 * enable sending of "extended W mode" packets to
2174 * userland. Reset the mode of the touchpad so that the
2175 * change in the level is picked up.
2177 error = block_mouse_data(sc, &command_byte);
2180 synaptics_set_mode(sc, synaptics_preferred_mode(sc));
2181 unblock_mouse_data(sc, command_byte);
2185 case MOUSE_GETSTATUS:
2187 status = sc->status;
2188 sc->status.flags = 0;
2189 sc->status.obutton = sc->status.button;
2190 sc->status.button = 0;
2195 *(mousestatus_t *)addr = status;
2198 #if (defined(MOUSE_GETVARS))
2200 var = (mousevar_t *)addr;
2201 bzero(var, sizeof(*var));
2203 var->var[0] = MOUSE_VARS_PS2_SIG;
2204 var->var[1] = sc->config;
2205 var->var[2] = sc->flags;
2211 #endif /* MOUSE_GETVARS */
2213 case MOUSE_READSTATE:
2214 case MOUSE_READDATA:
2215 data = (mousedata_t *)addr;
2216 if (data->len > sizeof(data->buf)/sizeof(data->buf[0]))
2219 error = block_mouse_data(sc, &command_byte);
2222 if ((data->len = get_mouse_status(sc->kbdc, data->buf,
2223 (cmd == MOUSE_READDATA) ? 1 : 0, data->len)) <= 0)
2225 unblock_mouse_data(sc, command_byte);
2228 #if (defined(MOUSE_SETRESOLUTION))
2229 case MOUSE_SETRESOLUTION:
2230 mode.resolution = *(int *)addr;
2231 if (mode.resolution >= UCHAR_MAX)
2233 else if (mode.resolution >= 200)
2234 mode.resolution = MOUSE_RES_HIGH;
2235 else if (mode.resolution >= 100)
2236 mode.resolution = MOUSE_RES_MEDIUMHIGH;
2237 else if (mode.resolution >= 50)
2238 mode.resolution = MOUSE_RES_MEDIUMLOW;
2239 else if (mode.resolution > 0)
2240 mode.resolution = MOUSE_RES_LOW;
2241 if (mode.resolution == MOUSE_RES_DEFAULT)
2242 mode.resolution = sc->dflt_mode.resolution;
2243 else if (mode.resolution == -1)
2244 mode.resolution = sc->mode.resolution;
2245 else if (mode.resolution < 0) /* MOUSE_RES_LOW/MEDIUM/HIGH */
2246 mode.resolution = MOUSE_RES_LOW - mode.resolution;
2248 error = block_mouse_data(sc, &command_byte);
2251 sc->mode.resolution =
2252 set_mouse_resolution(sc->kbdc, mode.resolution);
2253 if (sc->mode.resolution != mode.resolution)
2255 unblock_mouse_data(sc, command_byte);
2257 #endif /* MOUSE_SETRESOLUTION */
2259 #if (defined(MOUSE_SETRATE))
2261 mode.rate = *(int *)addr;
2262 if (mode.rate > UCHAR_MAX)
2265 mode.rate = sc->dflt_mode.rate;
2266 else if (mode.rate < 0)
2267 mode.rate = sc->mode.rate;
2269 error = block_mouse_data(sc, &command_byte);
2272 sc->mode.rate = set_mouse_sampling_rate(sc->kbdc, mode.rate);
2273 if (sc->mode.rate != mode.rate)
2275 unblock_mouse_data(sc, command_byte);
2277 #endif /* MOUSE_SETRATE */
2279 #if (defined(MOUSE_SETSCALING))
2280 case MOUSE_SETSCALING:
2281 if ((*(int *)addr <= 0) || (*(int *)addr > 2))
2284 error = block_mouse_data(sc, &command_byte);
2287 if (!set_mouse_scaling(sc->kbdc, *(int *)addr))
2289 unblock_mouse_data(sc, command_byte);
2291 #endif /* MOUSE_SETSCALING */
2293 #if (defined(MOUSE_GETHWID))
2295 error = block_mouse_data(sc, &command_byte);
2298 sc->hw.hwid &= ~0x00ff;
2299 sc->hw.hwid |= get_aux_id(sc->kbdc);
2300 *(int *)addr = sc->hw.hwid & 0x00ff;
2301 unblock_mouse_data(sc, command_byte);
2303 #endif /* MOUSE_GETHWID */
2309 error = fsetown(*(int *)addr, &sc->async);
2312 *(int *) addr = fgetown(&sc->async);
2322 psmtimeout(void *arg)
2324 struct psm_softc *sc;
2327 sc = (struct psm_softc *)arg;
2329 if (sc->watchdog && kbdc_lock(sc->kbdc, TRUE)) {
2330 VLOG(4, (LOG_DEBUG, "psm%d: lost interrupt?\n", sc->unit));
2332 kbdc_lock(sc->kbdc, FALSE);
2334 sc->watchdog = TRUE;
2336 callout_reset(&sc->callout, hz, psmtimeout, sc);
2339 /* Add all sysctls under the debug.psm and hw.psm nodes */
2340 static SYSCTL_NODE(_debug, OID_AUTO, psm, CTLFLAG_RD, 0, "ps/2 mouse");
2341 static SYSCTL_NODE(_hw, OID_AUTO, psm, CTLFLAG_RD, 0, "ps/2 mouse");
2343 SYSCTL_INT(_debug_psm, OID_AUTO, loglevel, CTLFLAG_RW, &verbose, 0,
2346 static int psmhz = 20;
2347 SYSCTL_INT(_debug_psm, OID_AUTO, hz, CTLFLAG_RW, &psmhz, 0,
2348 "Frequency of the softcallout (in hz)");
2349 static int psmerrsecs = 2;
2350 SYSCTL_INT(_debug_psm, OID_AUTO, errsecs, CTLFLAG_RW, &psmerrsecs, 0,
2351 "Number of seconds during which packets will dropped after a sync error");
2352 static int psmerrusecs = 0;
2353 SYSCTL_INT(_debug_psm, OID_AUTO, errusecs, CTLFLAG_RW, &psmerrusecs, 0,
2354 "Microseconds to add to psmerrsecs");
2355 static int psmsecs = 0;
2356 SYSCTL_INT(_debug_psm, OID_AUTO, secs, CTLFLAG_RW, &psmsecs, 0,
2357 "Max number of seconds between soft interrupts");
2358 static int psmusecs = 500000;
2359 SYSCTL_INT(_debug_psm, OID_AUTO, usecs, CTLFLAG_RW, &psmusecs, 0,
2360 "Microseconds to add to psmsecs");
2361 static int pkterrthresh = 2;
2362 SYSCTL_INT(_debug_psm, OID_AUTO, pkterrthresh, CTLFLAG_RW, &pkterrthresh, 0,
2363 "Number of error packets allowed before reinitializing the mouse");
2365 SYSCTL_INT(_hw_psm, OID_AUTO, tap_enabled, CTLFLAG_RW, &tap_enabled, 0,
2366 "Enable tap and drag gestures");
2367 static int tap_threshold = PSM_TAP_THRESHOLD;
2368 SYSCTL_INT(_hw_psm, OID_AUTO, tap_threshold, CTLFLAG_RW, &tap_threshold, 0,
2369 "Button tap threshold");
2370 static int tap_timeout = PSM_TAP_TIMEOUT;
2371 SYSCTL_INT(_hw_psm, OID_AUTO, tap_timeout, CTLFLAG_RW, &tap_timeout, 0,
2372 "Tap timeout for touchpads");
2377 struct psm_softc *sc = arg;
2383 /* read until there is nothing to read */
2384 while((c = read_aux_data_no_wait(sc->kbdc)) != -1) {
2385 pb = &sc->pqueue[sc->pqueue_end];
2387 /* discard the byte if the device is not open */
2388 if ((sc->state & PSM_OPEN) == 0)
2391 getmicrouptime(&now);
2392 if ((pb->inputbytes > 0) &&
2393 timevalcmp(&now, &sc->inputtimeout, >)) {
2394 VLOG(3, (LOG_DEBUG, "psmintr: delay too long; "
2395 "resetting byte count\n"));
2400 sc->inputtimeout.tv_sec = PSM_INPUT_TIMEOUT / 1000000;
2401 sc->inputtimeout.tv_usec = PSM_INPUT_TIMEOUT % 1000000;
2402 timevaladd(&sc->inputtimeout, &now);
2404 pb->ipacket[pb->inputbytes++] = c;
2406 if (sc->mode.level == PSM_LEVEL_NATIVE) {
2407 VLOG(4, (LOG_DEBUG, "psmintr: %02x\n", pb->ipacket[0]));
2412 if (pb->inputbytes < sc->mode.packetsize)
2416 "psmintr: %02x %02x %02x %02x %02x %02x\n",
2417 pb->ipacket[0], pb->ipacket[1], pb->ipacket[2],
2418 pb->ipacket[3], pb->ipacket[4], pb->ipacket[5]));
2423 if ((sc->flags & PSM_NEED_SYNCBITS) != 0) {
2424 sc->mode.syncmask[1] = (c & sc->mode.syncmask[0]);
2425 sc->flags &= ~PSM_NEED_SYNCBITS;
2427 "psmintr: Sync bytes now %04x,%04x\n",
2428 sc->mode.syncmask[0], sc->mode.syncmask[0]));
2429 } else if ((c & sc->mode.syncmask[0]) != sc->mode.syncmask[1]) {
2430 VLOG(3, (LOG_DEBUG, "psmintr: out of sync "
2431 "(%04x != %04x) %d cmds since last error.\n",
2432 c & sc->mode.syncmask[0], sc->mode.syncmask[1],
2433 sc->cmdcount - sc->lasterr));
2434 sc->lasterr = sc->cmdcount;
2436 * The sync byte test is a weak measure of packet
2437 * validity. Conservatively discard any input yet
2438 * to be seen by userland when we detect a sync
2439 * error since there is a good chance some of
2440 * the queued packets have undetected errors.
2443 if (sc->syncerrors == 0)
2446 sc->lastinputerr = now;
2447 if (sc->syncerrors >= sc->mode.packetsize * 2 ||
2448 sc->pkterrors >= pkterrthresh) {
2450 * If we've failed to find a single sync byte
2451 * in 2 packets worth of data, or we've seen
2452 * persistent packet errors during the
2453 * validation period, reinitialize the mouse
2454 * in hopes of returning it to the expected
2458 "psmintr: reset the mouse.\n"));
2459 reinitialize(sc, TRUE);
2460 } else if (sc->syncerrors == sc->mode.packetsize) {
2462 * Try a soft reset after searching for a sync
2463 * byte through a packet length of bytes.
2466 "psmintr: re-enable the mouse.\n"));
2468 disable_aux_dev(sc->kbdc);
2469 enable_aux_dev(sc->kbdc);
2472 "psmintr: discard a byte (%d)\n",
2475 bcopy(&pb->ipacket[1], &pb->ipacket[0],
2482 * We have what appears to be a valid packet.
2483 * Reset the error counters.
2488 * Drop even good packets if they occur within a timeout
2489 * period of a sync error. This allows the detection of
2490 * a change in the mouse's packet mode without exposing
2491 * erratic mouse behavior to the user. Some KVMs forget
2492 * enhanced mouse modes during switch events.
2494 if (!timeelapsed(&sc->lastinputerr, psmerrsecs, psmerrusecs,
2501 * Now that we're out of the validation period, reset
2502 * the packet error count.
2508 if (++sc->pqueue_end >= PSM_PACKETQUEUE)
2511 * If we've filled the queue then call the softintr ourselves,
2512 * otherwise schedule the interrupt for later.
2514 if (!timeelapsed(&sc->lastsoftintr, psmsecs, psmusecs, &now) ||
2515 (sc->pqueue_end == sc->pqueue_start)) {
2516 if ((sc->state & PSM_SOFTARMED) != 0) {
2517 sc->state &= ~PSM_SOFTARMED;
2518 callout_stop(&sc->softcallout);
2521 } else if ((sc->state & PSM_SOFTARMED) == 0) {
2522 sc->state |= PSM_SOFTARMED;
2523 callout_reset(&sc->softcallout,
2524 psmhz < 1 ? 1 : (hz/psmhz), psmsoftintr, arg);
2530 proc_mmanplus(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *ms,
2531 int *x, int *y, int *z)
2535 * PS2++ protocol packet
2537 * b7 b6 b5 b4 b3 b2 b1 b0
2538 * byte 1: * 1 p3 p2 1 * * *
2539 * byte 2: c1 c2 p1 p0 d1 d0 1 0
2541 * p3-p0: packet type
2542 * c1, c2: c1 & c2 == 1, if p2 == 0
2543 * c1 & c2 == 0, if p2 == 1
2545 * packet type: 0 (device type)
2546 * See comments in enable_mmanplus() below.
2548 * packet type: 1 (wheel data)
2550 * b7 b6 b5 b4 b3 b2 b1 b0
2551 * byte 3: h * B5 B4 s d2 d1 d0
2553 * h: 1, if horizontal roller data
2554 * 0, if vertical roller data
2555 * B4, B5: button 4 and 5
2557 * d2-d0: roller data
2559 * packet type: 2 (reserved)
2561 if (((pb->ipacket[0] & MOUSE_PS2PLUS_SYNCMASK) == MOUSE_PS2PLUS_SYNC) &&
2562 (abs(*x) > 191) && MOUSE_PS2PLUS_CHECKBITS(pb->ipacket)) {
2564 * the extended data packet encodes button
2567 switch (MOUSE_PS2PLUS_PACKET_TYPE(pb->ipacket)) {
2569 /* wheel data packet */
2571 if (pb->ipacket[2] & 0x80) {
2572 /* XXX horizontal roller count - ignore it */
2575 /* vertical roller count */
2576 *z = (pb->ipacket[2] & MOUSE_PS2PLUS_ZNEG) ?
2577 (pb->ipacket[2] & 0x0f) - 16 :
2578 (pb->ipacket[2] & 0x0f);
2580 ms->button |= (pb->ipacket[2] &
2581 MOUSE_PS2PLUS_BUTTON4DOWN) ?
2582 MOUSE_BUTTON4DOWN : 0;
2583 ms->button |= (pb->ipacket[2] &
2584 MOUSE_PS2PLUS_BUTTON5DOWN) ?
2585 MOUSE_BUTTON5DOWN : 0;
2589 * this packet type is reserved by
2593 * IBM ScrollPoint Mouse uses this
2594 * packet type to encode both vertical
2595 * and horizontal scroll movement.
2598 /* horizontal count */
2599 if (pb->ipacket[2] & 0x0f)
2600 *z = (pb->ipacket[2] & MOUSE_SPOINT_WNEG) ?
2602 /* vertical count */
2603 if (pb->ipacket[2] & 0xf0)
2604 *z = (pb->ipacket[2] & MOUSE_SPOINT_ZNEG) ?
2608 /* device type packet - shouldn't happen */
2612 ms->button = ms->obutton;
2613 VLOG(1, (LOG_DEBUG, "psmintr: unknown PS2++ packet "
2614 "type %d: 0x%02x 0x%02x 0x%02x\n",
2615 MOUSE_PS2PLUS_PACKET_TYPE(pb->ipacket),
2616 pb->ipacket[0], pb->ipacket[1], pb->ipacket[2]));
2620 /* preserve button states */
2621 ms->button |= ms->obutton & MOUSE_EXTBUTTONS;
2626 proc_synaptics(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *ms,
2627 int *x, int *y, int *z)
2629 static int touchpad_buttons;
2630 static int guest_buttons;
2633 /* TouchPad PS/2 absolute mode message format with capFourButtons:
2635 * Bits: 7 6 5 4 3 2 1 0 (LSB)
2636 * ------------------------------------------------
2637 * ipacket[0]: 1 0 W3 W2 0 W1 R L
2638 * ipacket[1]: Yb Ya Y9 Y8 Xb Xa X9 X8
2639 * ipacket[2]: Z7 Z6 Z5 Z4 Z3 Z2 Z1 Z0
2640 * ipacket[3]: 1 1 Yc Xc 0 W0 D^R U^L
2641 * ipacket[4]: X7 X6 X5 X4 X3 X2 X1 X0
2642 * ipacket[5]: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
2645 * L: left physical mouse button
2646 * R: right physical mouse button
2654 * Without capFourButtons but with nExtendeButtons and/or capMiddle
2656 * Bits: 7 6 5 4 3 2 1 0 (LSB)
2657 * ------------------------------------------------------
2658 * ipacket[3]: 1 1 Yc Xc 0 W0 E^R M^L
2659 * ipacket[4]: X7 X6 X5 X4 X3|b7 X2|b5 X1|b3 X0|b1
2660 * ipacket[5]: Y7 Y6 Y5 Y4 Y3|b8 Y2|b6 Y1|b4 Y0|b2
2663 * M: Middle physical mouse button
2664 * E: Extended mouse buttons reported instead of low bits of X and Y
2665 * b1-b8: Extended mouse buttons
2666 * Only ((nExtendedButtons + 1) >> 1) bits are used in packet
2667 * 4 and 5, for reading X and Y value they should be zeroed.
2669 * Absolute reportable limits: 0 - 6143.
2670 * Typical bezel limits: 1472 - 5472.
2671 * Typical edge marings: 1632 - 5312.
2673 * w = 3 Passthrough Packet
2675 * Byte 2,5,6 == Byte 1,2,3 of "Guest"
2678 if (!synaptics_support)
2681 /* Sanity check for out of sync packets. */
2682 if ((pb->ipacket[0] & 0xc8) != 0x80 ||
2683 (pb->ipacket[3] & 0xc8) != 0xc0)
2691 * z = 0 No finger contact
2692 * z = 10 Finger hovering near the pad
2693 * z = 30 Very light finger contact
2694 * z = 80 Normal finger contact
2695 * z = 110 Very heavy finger contact
2696 * z = 200 Finger lying flat on pad surface
2697 * z = 255 Maximum reportable Z
2699 *z = pb->ipacket[2];
2702 * Finger width value
2704 * w = 0 Two finger on the pad (capMultiFinger needed)
2705 * w = 1 Three or more fingers (capMultiFinger needed)
2706 * w = 2 Pen (instead of finger) (capPen needed)
2707 * w = 3 Reserved (passthrough?)
2708 * w = 4-7 Finger of normal width (capPalmDetect needed)
2709 * w = 8-14 Very wide finger or palm (capPalmDetect needed)
2710 * w = 15 Maximum reportable width (capPalmDetect needed)
2712 /* XXX Is checking capExtended enough? */
2713 if (sc->synhw.capExtended)
2714 w = ((pb->ipacket[0] & 0x30) >> 2) |
2715 ((pb->ipacket[0] & 0x04) >> 1) |
2716 ((pb->ipacket[3] & 0x04) >> 2);
2718 /* Assume a finger of regular width. */
2723 * Handle packets from the guest device. See:
2724 * Synaptics PS/2 TouchPad Interfacing Guide, Section 5.1
2726 if (w == 3 && sc->synhw.capPassthrough) {
2727 *x = ((pb->ipacket[1] & 0x10) ?
2728 pb->ipacket[4] - 256 : pb->ipacket[4]);
2729 *y = ((pb->ipacket[1] & 0x20) ?
2730 pb->ipacket[5] - 256 : pb->ipacket[5]);
2734 if (pb->ipacket[1] & 0x01)
2735 guest_buttons |= MOUSE_BUTTON1DOWN;
2736 if (pb->ipacket[1] & 0x04)
2737 guest_buttons |= MOUSE_BUTTON2DOWN;
2738 if (pb->ipacket[1] & 0x02)
2739 guest_buttons |= MOUSE_BUTTON3DOWN;
2741 ms->button = touchpad_buttons | guest_buttons;
2745 if (sc->syninfo.touchpad_off) {
2747 ms->button = ms->obutton;
2751 /* Button presses */
2752 touchpad_buttons = 0;
2753 if (pb->ipacket[0] & 0x01)
2754 touchpad_buttons |= MOUSE_BUTTON1DOWN;
2755 if (pb->ipacket[0] & 0x02)
2756 touchpad_buttons |= MOUSE_BUTTON3DOWN;
2758 if (sc->synhw.capExtended && sc->synhw.capFourButtons) {
2759 if ((pb->ipacket[3] ^ pb->ipacket[0]) & 0x01)
2760 touchpad_buttons |= MOUSE_BUTTON4DOWN;
2761 if ((pb->ipacket[3] ^ pb->ipacket[0]) & 0x02)
2762 touchpad_buttons |= MOUSE_BUTTON5DOWN;
2763 } else if (sc->synhw.capExtended && sc->synhw.capMiddle &&
2764 !sc->synhw.capClickPad) {
2766 if ((pb->ipacket[0] ^ pb->ipacket[3]) & 0x01)
2767 touchpad_buttons |= MOUSE_BUTTON2DOWN;
2768 } else if (sc->synhw.capExtended && (sc->synhw.nExtendedButtons > 0)) {
2769 /* Extended Buttons */
2770 if ((pb->ipacket[0] ^ pb->ipacket[3]) & 0x02) {
2771 if (sc->syninfo.directional_scrolls) {
2772 if (pb->ipacket[4] & 0x01)
2773 touchpad_buttons |= MOUSE_BUTTON4DOWN;
2774 if (pb->ipacket[5] & 0x01)
2775 touchpad_buttons |= MOUSE_BUTTON5DOWN;
2776 if (pb->ipacket[4] & 0x02)
2777 touchpad_buttons |= MOUSE_BUTTON6DOWN;
2778 if (pb->ipacket[5] & 0x02)
2779 touchpad_buttons |= MOUSE_BUTTON7DOWN;
2781 if (pb->ipacket[4] & 0x01)
2782 touchpad_buttons |= MOUSE_BUTTON1DOWN;
2783 if (pb->ipacket[5] & 0x01)
2784 touchpad_buttons |= MOUSE_BUTTON3DOWN;
2785 if (pb->ipacket[4] & 0x02)
2786 touchpad_buttons |= MOUSE_BUTTON2DOWN;
2787 sc->extended_buttons = touchpad_buttons;
2791 * Zero out bits used by extended buttons to avoid
2792 * misinterpretation of the data absolute position.
2794 * The bits represented by
2796 * (nExtendedButtons + 1) >> 1
2798 * will be masked out in both bytes.
2799 * The mask for n bits is computed with the formula
2805 maskedbits = (sc->synhw.nExtendedButtons + 1) >> 1;
2806 mask = (1 << maskedbits) - 1;
2807 pb->ipacket[4] &= ~(mask);
2808 pb->ipacket[5] &= ~(mask);
2809 } else if (!sc->syninfo.directional_scrolls &&
2810 !sc->synaction.in_vscroll) {
2812 * Keep reporting MOUSE DOWN until we get a new packet
2813 * indicating otherwise.
2815 touchpad_buttons |= sc->extended_buttons;
2818 /* Handle ClickPad. */
2819 if (sc->synhw.capClickPad &&
2820 ((pb->ipacket[0] ^ pb->ipacket[3]) & 0x01))
2821 touchpad_buttons |= MOUSE_BUTTON1DOWN;
2823 ms->button = touchpad_buttons | guest_buttons;
2826 * Check pressure to detect a real wanted action on the
2829 if (*z >= sc->syninfo.min_pressure) {
2830 synapticsaction_t *synaction;
2831 int cursor, peer, window;
2832 int dx, dy, dxp, dyp;
2833 int max_width, max_pressure;
2834 int margin_top, margin_right, margin_bottom, margin_left;
2835 int na_top, na_right, na_bottom, na_left;
2836 int window_min, window_max;
2838 int weight_current, weight_previous, weight_len_squared;
2839 int div_min, div_max, div_len;
2840 int vscroll_hor_area, vscroll_ver_area;
2841 int two_finger_scroll;
2842 int len, weight_prev_x, weight_prev_y;
2843 int div_max_x, div_max_y, div_x, div_y;
2847 /* XXX Verify values? */
2848 max_width = sc->syninfo.max_width;
2849 max_pressure = sc->syninfo.max_pressure;
2850 margin_top = sc->syninfo.margin_top;
2851 margin_right = sc->syninfo.margin_right;
2852 margin_bottom = sc->syninfo.margin_bottom;
2853 margin_left = sc->syninfo.margin_left;
2854 na_top = sc->syninfo.na_top;
2855 na_right = sc->syninfo.na_right;
2856 na_bottom = sc->syninfo.na_bottom;
2857 na_left = sc->syninfo.na_left;
2858 window_min = sc->syninfo.window_min;
2859 window_max = sc->syninfo.window_max;
2860 multiplicator = sc->syninfo.multiplicator;
2861 weight_current = sc->syninfo.weight_current;
2862 weight_previous = sc->syninfo.weight_previous;
2863 weight_len_squared = sc->syninfo.weight_len_squared;
2864 div_min = sc->syninfo.div_min;
2865 div_max = sc->syninfo.div_max;
2866 div_len = sc->syninfo.div_len;
2867 vscroll_hor_area = sc->syninfo.vscroll_hor_area;
2868 vscroll_ver_area = sc->syninfo.vscroll_ver_area;
2869 two_finger_scroll = sc->syninfo.two_finger_scroll;
2873 /* Palm detection. */
2875 ((sc->synhw.capMultiFinger ||
2876 sc->synhw.capAdvancedGestures) && (w == 0 || w == 1)) ||
2877 (sc->synhw.capPalmDetect && w >= 4 && w <= max_width) ||
2878 (!sc->synhw.capPalmDetect && *z <= max_pressure) ||
2879 (sc->synhw.capPen && w == 2))) {
2881 * We consider the packet irrelevant for the current
2883 * - the width isn't comprised in:
2885 * - the pressure isn't comprised in:
2886 * [min_pressure; max_pressure]
2887 * - pen aren't supported but w is 2
2889 * Note that this doesn't terminate the current action.
2892 "synaptics: palm detected! (%d)\n", w));
2896 /* Read current absolute position. */
2897 x0 = ((pb->ipacket[3] & 0x10) << 8) |
2898 ((pb->ipacket[1] & 0x0f) << 8) |
2900 y0 = ((pb->ipacket[3] & 0x20) << 7) |
2901 ((pb->ipacket[1] & 0xf0) << 4) |
2904 synaction = &(sc->synaction);
2907 * If the action is just beginning, init the structure and
2908 * compute tap timeout.
2910 if (!(sc->flags & PSM_FLAGS_FINGERDOWN)) {
2911 VLOG(3, (LOG_DEBUG, "synaptics: ----\n"));
2913 /* Store the first point of this action. */
2914 synaction->start_x = x0;
2915 synaction->start_y = y0;
2918 /* Initialize queue. */
2919 synaction->queue_cursor = SYNAPTICS_PACKETQUEUE;
2920 synaction->queue_len = 0;
2921 synaction->window_min = window_min;
2923 /* Reset average. */
2924 synaction->avg_dx = 0;
2925 synaction->avg_dy = 0;
2927 /* Reset squelch. */
2928 synaction->squelch_x = 0;
2929 synaction->squelch_y = 0;
2931 /* Reset pressure peak. */
2934 /* Reset fingers count. */
2935 synaction->fingers_nb = 0;
2937 /* Reset virtual scrolling state. */
2938 synaction->in_vscroll = 0;
2940 /* Compute tap timeout. */
2941 sc->taptimeout.tv_sec = tap_timeout / 1000000;
2942 sc->taptimeout.tv_usec = tap_timeout % 1000000;
2943 timevaladd(&sc->taptimeout, &sc->lastsoftintr);
2945 sc->flags |= PSM_FLAGS_FINGERDOWN;
2947 /* Calculate the current delta. */
2948 cursor = synaction->queue_cursor;
2949 dx = x0 - synaction->queue[cursor].x;
2950 dy = y0 - synaction->queue[cursor].y;
2953 /* If in tap-hold, add the recorded button. */
2954 if (synaction->in_taphold)
2955 ms->button |= synaction->tap_button;
2958 * From now on, we can use the SYNAPTICS_END label to skip
2959 * the current packet.
2963 * Limit the coordinates to the specified margins because
2964 * this area isn't very reliable.
2966 if (x0 <= margin_left)
2968 else if (x0 >= 6143 - margin_right)
2969 x0 = 6143 - margin_right;
2970 if (y0 <= margin_bottom)
2972 else if (y0 >= 6143 - margin_top)
2973 y0 = 6143 - margin_top;
2975 VLOG(3, (LOG_DEBUG, "synaptics: ipacket: [%d, %d], %d, %d\n",
2978 /* Queue this new packet. */
2979 cursor = SYNAPTICS_QUEUE_CURSOR(synaction->queue_cursor - 1);
2980 synaction->queue[cursor].x = x0;
2981 synaction->queue[cursor].y = y0;
2982 synaction->queue_cursor = cursor;
2983 if (synaction->queue_len < SYNAPTICS_PACKETQUEUE)
2984 synaction->queue_len++;
2986 "synaptics: cursor[%d]: x=%d, y=%d, dx=%d, dy=%d\n",
2987 cursor, x0, y0, dx, dy));
2990 * For tap, we keep the maximum number of fingers and the
2991 * pressure peak. Also with multiple fingers, we increase
2992 * the minimum window.
2995 case 1: /* Three or more fingers. */
2996 synaction->fingers_nb = imax(3, synaction->fingers_nb);
2997 synaction->window_min = window_max;
2999 case 0: /* Two fingers. */
3000 synaction->fingers_nb = imax(2, synaction->fingers_nb);
3001 synaction->window_min = window_max;
3003 default: /* One finger or undetectable. */
3004 synaction->fingers_nb = imax(1, synaction->fingers_nb);
3006 sc->zmax = imax(*z, sc->zmax);
3008 /* Do we have enough packets to consider this a movement? */
3009 if (synaction->queue_len < synaction->window_min)
3012 /* Is a scrolling action occuring? */
3013 if (!synaction->in_taphold && !synaction->in_vscroll) {
3015 * A scrolling action must not conflict with a tap
3016 * action. Here are the conditions to consider a
3018 * - the action in a configurable area
3019 * - one of the following:
3020 * . the distance between the last packet and the
3021 * first should be above a configurable minimum
3024 dxp = abs(synaction->queue[synaction->queue_cursor].x -
3025 synaction->start_x);
3026 dyp = abs(synaction->queue[synaction->queue_cursor].y -
3027 synaction->start_y);
3029 if (timevalcmp(&sc->lastsoftintr, &sc->taptimeout, >) ||
3030 dxp >= sc->syninfo.vscroll_min_delta ||
3031 dyp >= sc->syninfo.vscroll_min_delta) {
3033 * Handle two finger scrolling.
3034 * Note that we don't rely on fingers_nb
3035 * as that keeps the maximum number of fingers.
3037 if (two_finger_scroll) {
3039 synaction->in_vscroll +=
3041 synaction->in_vscroll +=
3045 /* Check for horizontal scrolling. */
3046 if ((vscroll_hor_area > 0 &&
3047 synaction->start_y <=
3048 vscroll_hor_area) ||
3049 (vscroll_hor_area < 0 &&
3050 synaction->start_y >=
3051 6143 + vscroll_hor_area))
3052 synaction->in_vscroll += 2;
3054 /* Check for vertical scrolling. */
3055 if ((vscroll_ver_area > 0 &&
3056 synaction->start_x <=
3057 vscroll_ver_area) ||
3058 (vscroll_ver_area < 0 &&
3059 synaction->start_x >=
3060 6143 + vscroll_ver_area))
3061 synaction->in_vscroll += 1;
3064 /* Avoid conflicts if area overlaps. */
3065 if (synaction->in_vscroll >= 3)
3066 synaction->in_vscroll =
3067 (dxp > dyp) ? 2 : 1;
3071 * Reset two finger scrolling when the number of fingers
3072 * is different from two.
3074 if (two_finger_scroll && w != 0 && synaction->in_vscroll != 0) {
3075 synaction->in_vscroll = 0;
3080 "synaptics: virtual scrolling: %s "
3081 "(direction=%d, dxp=%d, dyp=%d, fingers=%d)\n",
3082 synaction->in_vscroll ? "YES" : "NO",
3083 synaction->in_vscroll, dxp, dyp,
3084 synaction->fingers_nb));
3086 weight_prev_x = weight_prev_y = weight_previous;
3087 div_max_x = div_max_y = div_max;
3089 if (synaction->in_vscroll) {
3090 /* Dividers are different with virtual scrolling. */
3091 div_min = sc->syninfo.vscroll_div_min;
3092 div_max_x = div_max_y = sc->syninfo.vscroll_div_max;
3095 * There's a lot of noise in coordinates when
3096 * the finger is on the touchpad's borders. When
3097 * using this area, we apply a special weight and
3100 if (x0 <= na_left || x0 >= 6143 - na_right) {
3101 weight_prev_x = sc->syninfo.weight_previous_na;
3102 div_max_x = sc->syninfo.div_max_na;
3105 if (y0 <= na_bottom || y0 >= 6143 - na_top) {
3106 weight_prev_y = sc->syninfo.weight_previous_na;
3107 div_max_y = sc->syninfo.div_max_na;
3112 * Calculate weights for the average operands and
3113 * the divisor. Both depend on the distance between
3114 * the current packet and a previous one (based on the
3117 window = imin(synaction->queue_len, window_max);
3118 peer = SYNAPTICS_QUEUE_CURSOR(cursor + window - 1);
3119 dxp = abs(x0 - synaction->queue[peer].x) + 1;
3120 dyp = abs(y0 - synaction->queue[peer].y) + 1;
3121 len = (dxp * dxp) + (dyp * dyp);
3122 weight_prev_x = imin(weight_prev_x,
3123 weight_len_squared * weight_prev_x / len);
3124 weight_prev_y = imin(weight_prev_y,
3125 weight_len_squared * weight_prev_y / len);
3127 len = (dxp + dyp) / 2;
3128 div_x = div_len * div_max_x / len;
3129 div_x = imin(div_max_x, div_x);
3130 div_x = imax(div_min, div_x);
3131 div_y = div_len * div_max_y / len;
3132 div_y = imin(div_max_y, div_y);
3133 div_y = imax(div_min, div_y);
3136 "synaptics: peer=%d, len=%d, weight=%d/%d, div=%d/%d\n",
3137 peer, len, weight_prev_x, weight_prev_y, div_x, div_y));
3139 /* Compute averages. */
3141 (weight_current * dx * multiplicator +
3142 weight_prev_x * synaction->avg_dx) /
3143 (weight_current + weight_prev_x);
3146 (weight_current * dy * multiplicator +
3147 weight_prev_y * synaction->avg_dy) /
3148 (weight_current + weight_prev_y);
3151 "synaptics: avg_dx~=%d, avg_dy~=%d\n",
3152 synaction->avg_dx / multiplicator,
3153 synaction->avg_dy / multiplicator));
3155 /* Use these averages to calculate x & y. */
3156 synaction->squelch_x += synaction->avg_dx;
3157 *x = synaction->squelch_x / (div_x * multiplicator);
3158 synaction->squelch_x = synaction->squelch_x %
3159 (div_x * multiplicator);
3161 synaction->squelch_y += synaction->avg_dy;
3162 *y = synaction->squelch_y / (div_y * multiplicator);
3163 synaction->squelch_y = synaction->squelch_y %
3164 (div_y * multiplicator);
3166 if (synaction->in_vscroll) {
3167 switch(synaction->in_vscroll) {
3168 case 1: /* Vertical scrolling. */
3170 ms->button |= (*y > 0) ?
3174 case 2: /* Horizontal scrolling. */
3176 ms->button |= (*x > 0) ?
3182 /* The pointer is not moved. */
3185 /* On exit the x/y pos may jump, ignore this */
3189 VLOG(3, (LOG_DEBUG, "synaptics: [%d, %d] -> [%d, %d]\n",
3192 } else if (sc->flags & PSM_FLAGS_FINGERDOWN) {
3194 * An action is currently taking place but the pressure
3195 * dropped under the minimum, putting an end to it.
3197 synapticsaction_t *synaction;
3198 int taphold_timeout, dx, dy, tap_max_delta;
3200 synaction = &(sc->synaction);
3201 dx = abs(synaction->queue[synaction->queue_cursor].x -
3202 synaction->start_x);
3203 dy = abs(synaction->queue[synaction->queue_cursor].y -
3204 synaction->start_y);
3206 /* Max delta is disabled for multi-fingers tap. */
3207 if (synaction->fingers_nb > 1)
3208 tap_max_delta = imax(dx, dy);
3210 tap_max_delta = sc->syninfo.tap_max_delta;
3212 sc->flags &= ~PSM_FLAGS_FINGERDOWN;
3214 /* Check for tap. */
3216 "synaptics: zmax=%d, dx=%d, dy=%d, "
3217 "delta=%d, fingers=%d, queue=%d\n",
3218 sc->zmax, dx, dy, tap_max_delta, synaction->fingers_nb,
3219 synaction->queue_len));
3220 if (!synaction->in_vscroll && sc->zmax >= tap_threshold &&
3221 timevalcmp(&sc->lastsoftintr, &sc->taptimeout, <=) &&
3222 dx <= tap_max_delta && dy <= tap_max_delta &&
3223 synaction->queue_len >= sc->syninfo.tap_min_queue) {
3226 * - the maximum pressure went over tap_threshold
3227 * - the action ended before tap_timeout
3229 * To handle tap-hold, we must delay any button push to
3232 if (synaction->in_taphold) {
3234 * This is the second and last tap of a
3235 * double tap action, not a tap-hold.
3237 synaction->in_taphold = 0;
3240 * For double-tap to work:
3241 * - no button press is emitted (to
3242 * simulate a button release)
3243 * - PSM_FLAGS_FINGERDOWN is set to
3244 * force the next packet to emit a
3248 "synaptics: button RELEASE: %d\n",
3249 synaction->tap_button));
3250 sc->flags |= PSM_FLAGS_FINGERDOWN;
3253 * This is the first tap: we set the
3254 * tap-hold state and notify the button
3257 synaction->in_taphold = 1;
3258 taphold_timeout = sc->syninfo.taphold_timeout;
3259 sc->taptimeout.tv_sec = taphold_timeout /
3261 sc->taptimeout.tv_usec = taphold_timeout %
3263 timevaladd(&sc->taptimeout, &sc->lastsoftintr);
3265 switch (synaction->fingers_nb) {
3267 synaction->tap_button =
3271 synaction->tap_button =
3275 synaction->tap_button =
3279 "synaptics: button PRESS: %d\n",
3280 synaction->tap_button));
3281 ms->button |= synaction->tap_button;
3285 * Not enough pressure or timeout: reset
3288 if (synaction->in_taphold) {
3290 "synaptics: button RELEASE: %d\n",
3291 synaction->tap_button));
3292 synaction->in_taphold = 0;
3295 "synaptics: not a tap-hold\n"));
3298 } else if (!(sc->flags & PSM_FLAGS_FINGERDOWN) &&
3299 sc->synaction.in_taphold) {
3301 * For a tap-hold to work, the button must remain down at
3302 * least until timeout (where the in_taphold flags will be
3303 * cleared) or during the next action.
3305 if (timevalcmp(&sc->lastsoftintr, &sc->taptimeout, <=)) {
3306 ms->button |= sc->synaction.tap_button;
3309 "synaptics: button RELEASE: %d\n",
3310 sc->synaction.tap_button));
3311 sc->synaction.in_taphold = 0;
3317 * Use the extra buttons as a scrollwheel
3319 * XXX X.Org uses the Z axis for vertical wheel only,
3320 * whereas moused(8) understands special values to differ
3321 * vertical and horizontal wheels.
3323 * xf86-input-mouse needs therefore a small patch to
3324 * understand these special values. Without it, the
3325 * horizontal wheel acts as a vertical wheel in X.Org.
3327 * That's why the horizontal wheel is disabled by
3331 if (ms->button & MOUSE_BUTTON4DOWN) {
3333 ms->button &= ~MOUSE_BUTTON4DOWN;
3334 } else if (ms->button & MOUSE_BUTTON5DOWN) {
3336 ms->button &= ~MOUSE_BUTTON5DOWN;
3337 } else if (ms->button & MOUSE_BUTTON6DOWN) {
3339 ms->button &= ~MOUSE_BUTTON6DOWN;
3340 } else if (ms->button & MOUSE_BUTTON7DOWN) {
3342 ms->button &= ~MOUSE_BUTTON7DOWN;
3350 proc_versapad(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *ms,
3351 int *x, int *y, int *z)
3353 static int butmap_versapad[8] = {
3359 MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
3361 MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN
3365 /* VersaPad PS/2 absolute mode message format
3367 * [packet1] 7 6 5 4 3 2 1 0(LSB)
3368 * ipacket[0]: 1 1 0 A 1 L T R
3369 * ipacket[1]: H7 H6 H5 H4 H3 H2 H1 H0
3370 * ipacket[2]: V7 V6 V5 V4 V3 V2 V1 V0
3371 * ipacket[3]: 1 1 1 A 1 L T R
3372 * ipacket[4]:V11 V10 V9 V8 H11 H10 H9 H8
3373 * ipacket[5]: 0 P6 P5 P4 P3 P2 P1 P0
3376 * R: right physical mouse button (1=on)
3377 * T: touch pad virtual button (1=tapping)
3378 * L: left physical mouse button (1=on)
3379 * A: position data is valid (1=valid)
3380 * H: horizontal data (12bit signed integer. H11 is sign bit.)
3381 * V: vertical data (12bit signed integer. V11 is sign bit.)
3384 * Tapping is mapped to MOUSE_BUTTON4.
3388 ms->button = butmap_versapad[c & MOUSE_PS2VERSA_BUTTONS];
3389 ms->button |= (c & MOUSE_PS2VERSA_TAP) ? MOUSE_BUTTON4DOWN : 0;
3390 if (c & MOUSE_PS2VERSA_IN_USE) {
3391 x0 = pb->ipacket[1] | (((pb->ipacket[4]) & 0x0f) << 8);
3392 y0 = pb->ipacket[2] | (((pb->ipacket[4]) & 0xf0) << 4);
3397 if (sc->flags & PSM_FLAGS_FINGERDOWN) {
3400 if (*x < 0) /* XXX */
3409 sc->flags |= PSM_FLAGS_FINGERDOWN;
3413 sc->flags &= ~PSM_FLAGS_FINGERDOWN;
3417 psmsoftintr(void *arg)
3420 * the table to turn PS/2 mouse button bits (MOUSE_PS2_BUTTON?DOWN)
3421 * into `mousestatus' button bits (MOUSE_BUTTON?DOWN).
3423 static int butmap[8] = {
3427 MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
3429 MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN,
3430 MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN,
3431 MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN
3433 struct psm_softc *sc = arg;
3436 int x, y, z, c, l, s;
3438 getmicrouptime(&sc->lastsoftintr);
3443 pb = &sc->pqueue[sc->pqueue_start];
3445 if (sc->mode.level == PSM_LEVEL_NATIVE)
3450 * A kludge for Kensington device!
3451 * The MSB of the horizontal count appears to be stored in
3454 if (sc->hw.model == MOUSE_MODEL_THINK)
3455 pb->ipacket[1] |= (c & MOUSE_PS2_XOVERFLOW) ? 0x80 : 0;
3457 /* ignore the overflow bits... */
3458 x = (c & MOUSE_PS2_XNEG) ?
3459 pb->ipacket[1] - 256 : pb->ipacket[1];
3460 y = (c & MOUSE_PS2_YNEG) ?
3461 pb->ipacket[2] - 256 : pb->ipacket[2];
3463 ms.obutton = sc->button; /* previous button state */
3464 ms.button = butmap[c & MOUSE_PS2_BUTTONS];
3465 /* `tapping' action */
3466 if (sc->config & PSM_CONFIG_FORCETAP)
3467 ms.button |= ((c & MOUSE_PS2_TAP)) ?
3468 0 : MOUSE_BUTTON4DOWN;
3470 switch (sc->hw.model) {
3472 case MOUSE_MODEL_EXPLORER:
3474 * b7 b6 b5 b4 b3 b2 b1 b0
3475 * byte 1: oy ox sy sx 1 M R L
3476 * byte 2: x x x x x x x x
3477 * byte 3: y y y y y y y y
3478 * byte 4: * * S2 S1 s d2 d1 d0
3480 * L, M, R, S1, S2: left, middle, right and side buttons
3481 * s: wheel data sign bit
3484 z = (pb->ipacket[3] & MOUSE_EXPLORER_ZNEG) ?
3485 (pb->ipacket[3] & 0x0f) - 16 :
3486 (pb->ipacket[3] & 0x0f);
3488 (pb->ipacket[3] & MOUSE_EXPLORER_BUTTON4DOWN) ?
3489 MOUSE_BUTTON4DOWN : 0;
3491 (pb->ipacket[3] & MOUSE_EXPLORER_BUTTON5DOWN) ?
3492 MOUSE_BUTTON5DOWN : 0;
3495 case MOUSE_MODEL_INTELLI:
3496 case MOUSE_MODEL_NET:
3497 /* wheel data is in the fourth byte */
3498 z = (char)pb->ipacket[3];
3500 * XXX some mice may send 7 when there is no Z movement? */
3501 if ((z >= 7) || (z <= -7))
3503 /* some compatible mice have additional buttons */
3504 ms.button |= (c & MOUSE_PS2INTELLI_BUTTON4DOWN) ?
3505 MOUSE_BUTTON4DOWN : 0;
3506 ms.button |= (c & MOUSE_PS2INTELLI_BUTTON5DOWN) ?
3507 MOUSE_BUTTON5DOWN : 0;
3510 case MOUSE_MODEL_MOUSEMANPLUS:
3511 proc_mmanplus(sc, pb, &ms, &x, &y, &z);
3514 case MOUSE_MODEL_GLIDEPOINT:
3515 /* `tapping' action */
3516 ms.button |= ((c & MOUSE_PS2_TAP)) ? 0 :
3520 case MOUSE_MODEL_NETSCROLL:
3522 * three addtional bytes encode buttons and
3525 ms.button |= (pb->ipacket[3] & MOUSE_PS2_BUTTON3DOWN) ?
3526 MOUSE_BUTTON4DOWN : 0;
3527 ms.button |= (pb->ipacket[3] & MOUSE_PS2_BUTTON1DOWN) ?
3528 MOUSE_BUTTON5DOWN : 0;
3529 z = (pb->ipacket[3] & MOUSE_PS2_XNEG) ?
3530 pb->ipacket[4] - 256 : pb->ipacket[4];
3533 case MOUSE_MODEL_THINK:
3534 /* the fourth button state in the first byte */
3535 ms.button |= (c & MOUSE_PS2_TAP) ?
3536 MOUSE_BUTTON4DOWN : 0;
3539 case MOUSE_MODEL_VERSAPAD:
3540 proc_versapad(sc, pb, &ms, &x, &y, &z);
3541 c = ((x < 0) ? MOUSE_PS2_XNEG : 0) |
3542 ((y < 0) ? MOUSE_PS2_YNEG : 0);
3545 case MOUSE_MODEL_4D:
3547 * b7 b6 b5 b4 b3 b2 b1 b0
3548 * byte 1: s2 d2 s1 d1 1 M R L
3549 * byte 2: sx x x x x x x x
3550 * byte 3: sy y y y y y y y
3552 * s1: wheel 1 direction
3554 * s2: wheel 2 direction
3557 x = (pb->ipacket[1] & 0x80) ?
3558 pb->ipacket[1] - 256 : pb->ipacket[1];
3559 y = (pb->ipacket[2] & 0x80) ?
3560 pb->ipacket[2] - 256 : pb->ipacket[2];
3561 switch (c & MOUSE_4D_WHEELBITS) {
3568 case 0x40: /* XXX 2nd wheel turning right */
3571 case 0xc0: /* XXX 2nd wheel turning left */
3577 case MOUSE_MODEL_4DPLUS:
3578 if ((x < 16 - 256) && (y < 16 - 256)) {
3580 * b7 b6 b5 b4 b3 b2 b1 b0
3581 * byte 1: 0 0 1 1 1 M R L
3582 * byte 2: 0 0 0 0 1 0 0 0
3583 * byte 3: 0 0 0 0 S s d1 d0
3585 * L, M, R, S: left, middle, right,
3587 * s: wheel data sign bit
3591 if (pb->ipacket[2] & MOUSE_4DPLUS_BUTTON4DOWN)
3592 ms.button |= MOUSE_BUTTON4DOWN;
3593 z = (pb->ipacket[2] & MOUSE_4DPLUS_ZNEG) ?
3594 ((pb->ipacket[2] & 0x07) - 8) :
3595 (pb->ipacket[2] & 0x07) ;
3597 /* preserve previous button states */
3598 ms.button |= ms.obutton & MOUSE_EXTBUTTONS;
3602 case MOUSE_MODEL_SYNAPTICS:
3603 if (proc_synaptics(sc, pb, &ms, &x, &y, &z) != 0)
3607 case MOUSE_MODEL_TRACKPOINT:
3608 case MOUSE_MODEL_GENERIC:
3614 if (sc->mode.accelfactor >= 1) {
3616 x = x * x / sc->mode.accelfactor;
3619 if (c & MOUSE_PS2_XNEG)
3623 y = y * y / sc->mode.accelfactor;
3626 if (c & MOUSE_PS2_YNEG)
3634 ms.flags = ((x || y || z) ? MOUSE_POSCHANGED : 0) |
3635 (ms.obutton ^ ms.button);
3637 pb->inputbytes = tame_mouse(sc, pb, &ms, pb->ipacket);
3639 sc->status.flags |= ms.flags;
3640 sc->status.dx += ms.dx;
3641 sc->status.dy += ms.dy;
3642 sc->status.dz += ms.dz;
3643 sc->status.button = ms.button;
3644 sc->button = ms.button;
3647 sc->watchdog = FALSE;
3650 if (sc->queue.count + pb->inputbytes < sizeof(sc->queue.buf)) {
3651 l = imin(pb->inputbytes,
3652 sizeof(sc->queue.buf) - sc->queue.tail);
3653 bcopy(&pb->ipacket[0], &sc->queue.buf[sc->queue.tail], l);
3654 if (pb->inputbytes > l)
3655 bcopy(&pb->ipacket[l], &sc->queue.buf[0],
3656 pb->inputbytes - l);
3657 sc->queue.tail = (sc->queue.tail + pb->inputbytes) %
3658 sizeof(sc->queue.buf);
3659 sc->queue.count += pb->inputbytes;
3664 if (++sc->pqueue_start >= PSM_PACKETQUEUE)
3665 sc->pqueue_start = 0;
3666 } while (sc->pqueue_start != sc->pqueue_end);
3668 if (sc->state & PSM_ASLP) {
3669 sc->state &= ~PSM_ASLP;
3672 selwakeuppri(&sc->rsel, PZERO);
3673 if (sc->async != NULL) {
3674 pgsigio(&sc->async, SIGIO, 0);
3676 sc->state &= ~PSM_SOFTARMED;
3681 psmpoll(struct cdev *dev, int events, struct thread *td)
3683 struct psm_softc *sc = dev->si_drv1;
3687 /* Return true if a mouse event available */
3689 if (events & (POLLIN | POLLRDNORM)) {
3690 if (sc->queue.count > 0)
3691 revents |= events & (POLLIN | POLLRDNORM);
3693 selrecord(td, &sc->rsel);
3700 /* vendor/model specific routines */
3702 static int mouse_id_proc1(KBDC kbdc, int res, int scale, int *status)
3704 if (set_mouse_resolution(kbdc, res) != res)
3706 if (set_mouse_scaling(kbdc, scale) &&
3707 set_mouse_scaling(kbdc, scale) &&
3708 set_mouse_scaling(kbdc, scale) &&
3709 (get_mouse_status(kbdc, status, 0, 3) >= 3))
3715 mouse_ext_command(KBDC kbdc, int command)
3719 c = (command >> 6) & 0x03;
3720 if (set_mouse_resolution(kbdc, c) != c)
3722 c = (command >> 4) & 0x03;
3723 if (set_mouse_resolution(kbdc, c) != c)
3725 c = (command >> 2) & 0x03;
3726 if (set_mouse_resolution(kbdc, c) != c)
3728 c = (command >> 0) & 0x03;
3729 if (set_mouse_resolution(kbdc, c) != c)
3735 /* Logitech MouseMan Cordless II */
3737 enable_lcordless(struct psm_softc *sc, enum probearg arg)
3739 KBDC kbdc = sc->kbdc;
3743 if (!mouse_id_proc1(kbdc, PSMD_RES_HIGH, 2, status))
3745 if (status[1] == PSMD_RES_HIGH)
3747 ch = (status[0] & 0x07) - 1; /* channel # */
3748 if ((ch <= 0) || (ch > 4))
3751 * status[1]: always one?
3752 * status[2]: battery status? (0-100)
3758 /* Genius NetScroll Mouse, MouseSystems SmartScroll Mouse */
3760 enable_groller(struct psm_softc *sc, enum probearg arg)
3762 KBDC kbdc = sc->kbdc;
3766 * The special sequence to enable the fourth button and the
3767 * roller. Immediately after this sequence check status bytes.
3768 * if the mouse is NetScroll, the second and the third bytes are
3773 * If the mouse is an ordinary PS/2 mouse, the status bytes should
3774 * look like the following.
3776 * byte 1 bit 7 always 0
3777 * bit 6 stream mode (0)
3778 * bit 5 disabled (0)
3779 * bit 4 1:1 scaling (0)
3781 * bit 0-2 button status
3782 * byte 2 resolution (PSMD_RES_HIGH)
3783 * byte 3 report rate (?)
3786 if (!mouse_id_proc1(kbdc, PSMD_RES_HIGH, 1, status))
3788 if ((status[1] != '3') || (status[2] != 'D'))
3790 /* FIXME: SmartScroll Mouse has 5 buttons! XXX */
3796 /* Genius NetMouse/NetMouse Pro, ASCII Mie Mouse, NetScroll Optical */
3798 enable_gmouse(struct psm_softc *sc, enum probearg arg)
3800 KBDC kbdc = sc->kbdc;
3804 * The special sequence to enable the middle, "rubber" button.
3805 * Immediately after this sequence check status bytes.
3806 * if the mouse is NetMouse, NetMouse Pro, or ASCII MIE Mouse,
3807 * the second and the third bytes are '3' and 'U'.
3808 * NOTE: NetMouse reports that it has three buttons although it has
3809 * two buttons and a rubber button. NetMouse Pro and MIE Mouse
3810 * say they have three buttons too and they do have a button on the
3813 if (!mouse_id_proc1(kbdc, PSMD_RES_HIGH, 1, status))
3815 if ((status[1] != '3') || (status[2] != 'U'))
3820 /* ALPS GlidePoint */
3822 enable_aglide(struct psm_softc *sc, enum probearg arg)
3824 KBDC kbdc = sc->kbdc;
3828 * The special sequence to obtain ALPS GlidePoint specific
3829 * information. Immediately after this sequence, status bytes will
3830 * contain something interesting.
3831 * NOTE: ALPS produces several models of GlidePoint. Some of those
3832 * do not respond to this sequence, thus, cannot be detected this way.
3834 if (set_mouse_sampling_rate(kbdc, 100) != 100)
3836 if (!mouse_id_proc1(kbdc, PSMD_RES_LOW, 2, status))
3838 if ((status[1] == PSMD_RES_LOW) || (status[2] == 100))
3843 /* Kensington ThinkingMouse/Trackball */
3845 enable_kmouse(struct psm_softc *sc, enum probearg arg)
3847 static u_char rate[] = { 20, 60, 40, 20, 20, 60, 40, 20, 20 };
3848 KBDC kbdc = sc->kbdc;
3854 id1 = get_aux_id(kbdc);
3855 if (set_mouse_sampling_rate(kbdc, 10) != 10)
3858 * The device is now in the native mode? It returns a different
3861 id2 = get_aux_id(kbdc);
3862 if ((id1 == id2) || (id2 != 2))
3865 if (set_mouse_resolution(kbdc, PSMD_RES_LOW) != PSMD_RES_LOW)
3868 /* at this point, resolution is LOW, sampling rate is 10/sec */
3869 if (get_mouse_status(kbdc, status, 0, 3) < 3)
3874 * The special sequence to enable the third and fourth buttons.
3875 * Otherwise they behave like the first and second buttons.
3877 for (i = 0; i < sizeof(rate)/sizeof(rate[0]); ++i)
3878 if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i])
3882 * At this point, the device is using default resolution and
3883 * sampling rate for the native mode.
3885 if (get_mouse_status(kbdc, status, 0, 3) < 3)
3887 if ((status[1] == PSMD_RES_LOW) || (status[2] == rate[i - 1]))
3890 /* the device appears be enabled by this sequence, diable it for now */
3891 disable_aux_dev(kbdc);
3892 empty_aux_buffer(kbdc, 5);
3897 /* Logitech MouseMan+/FirstMouse+, IBM ScrollPoint Mouse */
3899 enable_mmanplus(struct psm_softc *sc, enum probearg arg)
3901 KBDC kbdc = sc->kbdc;
3904 /* the special sequence to enable the fourth button and the roller. */
3906 * NOTE: for ScrollPoint to respond correctly, the SET_RESOLUTION
3907 * must be called exactly three times since the last RESET command
3908 * before this sequence. XXX
3910 if (!set_mouse_scaling(kbdc, 1))
3912 if (!mouse_ext_command(kbdc, 0x39) || !mouse_ext_command(kbdc, 0xdb))
3914 if (get_mouse_status(kbdc, data, 1, 3) < 3)
3918 * PS2++ protocol, packet type 0
3920 * b7 b6 b5 b4 b3 b2 b1 b0
3921 * byte 1: * 1 p3 p2 1 * * *
3922 * byte 2: 1 1 p1 p0 m1 m0 1 0
3923 * byte 3: m7 m6 m5 m4 m3 m2 m1 m0
3925 * p3-p0: packet type: 0
3926 * m7-m0: model ID: MouseMan+:0x50,
3928 * ScrollPoint:0x58...
3930 /* check constant bits */
3931 if ((data[0] & MOUSE_PS2PLUS_SYNCMASK) != MOUSE_PS2PLUS_SYNC)
3933 if ((data[1] & 0xc3) != 0xc2)
3935 /* check d3-d0 in byte 2 */
3936 if (!MOUSE_PS2PLUS_CHECKBITS(data))
3939 if (MOUSE_PS2PLUS_PACKET_TYPE(data) != 0)
3943 sc->hw.hwid &= 0x00ff;
3944 sc->hw.hwid |= data[2] << 8; /* save model ID */
3948 * MouseMan+ (or FirstMouse+) is now in its native mode, in which
3949 * the wheel and the fourth button events are encoded in the
3950 * special data packet. The mouse may be put in the IntelliMouse mode
3951 * if it is initialized by the IntelliMouse's method.
3956 /* MS IntelliMouse Explorer */
3958 enable_msexplorer(struct psm_softc *sc, enum probearg arg)
3960 KBDC kbdc = sc->kbdc;
3961 static u_char rate0[] = { 200, 100, 80, };
3962 static u_char rate1[] = { 200, 200, 80, };
3967 * This is needed for at least A4Tech X-7xx mice - they do not go
3968 * straight to Explorer mode, but need to be set to Intelli mode
3971 enable_msintelli(sc, arg);
3973 /* the special sequence to enable the extra buttons and the roller. */
3974 for (i = 0; i < sizeof(rate1)/sizeof(rate1[0]); ++i)
3975 if (set_mouse_sampling_rate(kbdc, rate1[i]) != rate1[i])
3977 /* the device will give the genuine ID only after the above sequence */
3978 id = get_aux_id(kbdc);
3979 if (id != PSM_EXPLORER_ID)
3983 sc->hw.buttons = 5; /* IntelliMouse Explorer XXX */
3988 * XXX: this is a kludge to fool some KVM switch products
3989 * which think they are clever enough to know the 4-byte IntelliMouse
3990 * protocol, and assume any other protocols use 3-byte packets.
3991 * They don't convey 4-byte data packets from the IntelliMouse Explorer
3992 * correctly to the host computer because of this!
3993 * The following sequence is actually IntelliMouse's "wake up"
3994 * sequence; it will make the KVM think the mouse is IntelliMouse
3995 * when it is in fact IntelliMouse Explorer.
3997 for (i = 0; i < sizeof(rate0)/sizeof(rate0[0]); ++i)
3998 if (set_mouse_sampling_rate(kbdc, rate0[i]) != rate0[i])
4007 * Logitech MouseMan+ and FirstMouse+ will also respond to this
4008 * probe routine and act like IntelliMouse.
4011 enable_msintelli(struct psm_softc *sc, enum probearg arg)
4013 KBDC kbdc = sc->kbdc;
4014 static u_char rate[] = { 200, 100, 80, };
4018 /* the special sequence to enable the third button and the roller. */
4019 for (i = 0; i < sizeof(rate)/sizeof(rate[0]); ++i)
4020 if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i])
4022 /* the device will give the genuine ID only after the above sequence */
4023 id = get_aux_id(kbdc);
4024 if (id != PSM_INTELLI_ID)
4037 * Newer wheel mice from A4 Tech may use the 4D+ protocol.
4040 enable_4dmouse(struct psm_softc *sc, enum probearg arg)
4042 static u_char rate[] = { 200, 100, 80, 60, 40, 20 };
4043 KBDC kbdc = sc->kbdc;
4047 for (i = 0; i < sizeof(rate)/sizeof(rate[0]); ++i)
4048 if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i])
4050 id = get_aux_id(kbdc);
4052 * WinEasy 4D, 4 Way Scroll 4D: 6
4053 * Cable-Free 4D: 8 (4DPLUS)
4054 * WinBest 4D+, 4 Way Scroll 4D+: 8 (4DPLUS)
4056 if (id != PSM_4DMOUSE_ID)
4060 sc->hw.buttons = 3; /* XXX some 4D mice have 4? */
4069 * Newer wheel mice from A4 Tech seem to use this protocol.
4070 * Older models are recognized as either 4D Mouse or IntelliMouse.
4073 enable_4dplus(struct psm_softc *sc, enum probearg arg)
4075 KBDC kbdc = sc->kbdc;
4079 * enable_4dmouse() already issued the following ID sequence...
4080 static u_char rate[] = { 200, 100, 80, 60, 40, 20 };
4083 for (i = 0; i < sizeof(rate)/sizeof(rate[0]); ++i)
4084 if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i])
4088 id = get_aux_id(kbdc);
4092 case PSM_4DPLUS_RFSW35_ID:
4099 sc->hw.buttons = (id == PSM_4DPLUS_ID) ? 4 : 3;
4106 /* Synaptics Touchpad */
4108 synaptics_sysctl(SYSCTL_HANDLER_ARGS)
4112 /* Read the current value. */
4113 arg = *(int *)oidp->oid_arg1;
4114 error = sysctl_handle_int(oidp, &arg, 0, req);
4117 if (error || !req->newptr)
4121 * Check that the new value is in the concerned node's range
4124 switch (oidp->oid_arg2) {
4125 case SYNAPTICS_SYSCTL_MIN_PRESSURE:
4126 case SYNAPTICS_SYSCTL_MAX_PRESSURE:
4127 if (arg < 0 || arg > 255)
4130 case SYNAPTICS_SYSCTL_MAX_WIDTH:
4131 if (arg < 4 || arg > 15)
4134 case SYNAPTICS_SYSCTL_MARGIN_TOP:
4135 case SYNAPTICS_SYSCTL_MARGIN_RIGHT:
4136 case SYNAPTICS_SYSCTL_MARGIN_BOTTOM:
4137 case SYNAPTICS_SYSCTL_MARGIN_LEFT:
4138 case SYNAPTICS_SYSCTL_NA_TOP:
4139 case SYNAPTICS_SYSCTL_NA_RIGHT:
4140 case SYNAPTICS_SYSCTL_NA_BOTTOM:
4141 case SYNAPTICS_SYSCTL_NA_LEFT:
4142 if (arg < 0 || arg > 6143)
4145 case SYNAPTICS_SYSCTL_WINDOW_MIN:
4146 case SYNAPTICS_SYSCTL_WINDOW_MAX:
4147 case SYNAPTICS_SYSCTL_TAP_MIN_QUEUE:
4148 if (arg < 1 || arg > SYNAPTICS_PACKETQUEUE)
4151 case SYNAPTICS_SYSCTL_MULTIPLICATOR:
4152 case SYNAPTICS_SYSCTL_WEIGHT_CURRENT:
4153 case SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS:
4154 case SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS_NA:
4155 case SYNAPTICS_SYSCTL_WEIGHT_LEN_SQUARED:
4156 case SYNAPTICS_SYSCTL_DIV_MIN:
4157 case SYNAPTICS_SYSCTL_DIV_MAX:
4158 case SYNAPTICS_SYSCTL_DIV_MAX_NA:
4159 case SYNAPTICS_SYSCTL_DIV_LEN:
4160 case SYNAPTICS_SYSCTL_VSCROLL_DIV_MIN:
4161 case SYNAPTICS_SYSCTL_VSCROLL_DIV_MAX:
4165 case SYNAPTICS_SYSCTL_TAP_MAX_DELTA:
4166 case SYNAPTICS_SYSCTL_TAPHOLD_TIMEOUT:
4167 case SYNAPTICS_SYSCTL_VSCROLL_MIN_DELTA:
4171 case SYNAPTICS_SYSCTL_VSCROLL_HOR_AREA:
4172 case SYNAPTICS_SYSCTL_VSCROLL_VER_AREA:
4173 if (arg < -6143 || arg > 6143)
4176 case SYNAPTICS_SYSCTL_TOUCHPAD_OFF:
4177 if (arg < 0 || arg > 1)
4185 *(int *)oidp->oid_arg1 = arg;
4191 synaptics_sysctl_create_tree(struct psm_softc *sc)
4194 if (sc->syninfo.sysctl_tree != NULL)
4197 /* Attach extra synaptics sysctl nodes under hw.psm.synaptics */
4198 sysctl_ctx_init(&sc->syninfo.sysctl_ctx);
4199 sc->syninfo.sysctl_tree = SYSCTL_ADD_NODE(&sc->syninfo.sysctl_ctx,
4200 SYSCTL_STATIC_CHILDREN(_hw_psm), OID_AUTO, "synaptics", CTLFLAG_RD,
4201 0, "Synaptics TouchPad");
4203 /* hw.psm.synaptics.directional_scrolls. */
4204 sc->syninfo.directional_scrolls = 0;
4205 SYSCTL_ADD_INT(&sc->syninfo.sysctl_ctx,
4206 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4207 "directional_scrolls", CTLFLAG_RW|CTLFLAG_ANYBODY,
4208 &sc->syninfo.directional_scrolls, 0,
4209 "Enable hardware scrolling pad (if non-zero) or register it as "
4210 "extended buttons (if 0)");
4213 * Turn off two finger scroll if we have a
4214 * physical area reserved for scrolling or when
4215 * there's no multi finger support.
4217 if (sc->synhw.verticalScroll || (sc->synhw.capMultiFinger == 0 &&
4218 sc->synhw.capAdvancedGestures == 0))
4219 sc->syninfo.two_finger_scroll = 0;
4221 sc->syninfo.two_finger_scroll = 1;
4222 /* hw.psm.synaptics.two_finger_scroll. */
4223 SYSCTL_ADD_INT(&sc->syninfo.sysctl_ctx,
4224 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4225 "two_finger_scroll", CTLFLAG_RW|CTLFLAG_ANYBODY,
4226 &sc->syninfo.two_finger_scroll, 0,
4227 "Enable two finger scrolling");
4229 /* hw.psm.synaptics.min_pressure. */
4230 sc->syninfo.min_pressure = 16;
4231 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
4232 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4233 "min_pressure", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4234 &sc->syninfo.min_pressure, SYNAPTICS_SYSCTL_MIN_PRESSURE,
4235 synaptics_sysctl, "I",
4236 "Minimum pressure required to start an action");
4238 /* hw.psm.synaptics.max_pressure. */
4239 sc->syninfo.max_pressure = 220;
4240 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
4241 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4242 "max_pressure", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4243 &sc->syninfo.max_pressure, SYNAPTICS_SYSCTL_MAX_PRESSURE,
4244 synaptics_sysctl, "I",
4245 "Maximum pressure to detect palm");
4247 /* hw.psm.synaptics.max_width. */
4248 sc->syninfo.max_width = 10;
4249 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
4250 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4251 "max_width", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4252 &sc->syninfo.max_width, SYNAPTICS_SYSCTL_MAX_WIDTH,
4253 synaptics_sysctl, "I",
4254 "Maximum finger width to detect palm");
4256 /* hw.psm.synaptics.top_margin. */
4257 sc->syninfo.margin_top = 200;
4258 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
4259 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4260 "margin_top", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4261 &sc->syninfo.margin_top, SYNAPTICS_SYSCTL_MARGIN_TOP,
4262 synaptics_sysctl, "I",
4265 /* hw.psm.synaptics.right_margin. */
4266 sc->syninfo.margin_right = 200;
4267 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
4268 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4269 "margin_right", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4270 &sc->syninfo.margin_right, SYNAPTICS_SYSCTL_MARGIN_RIGHT,
4271 synaptics_sysctl, "I",
4274 /* hw.psm.synaptics.bottom_margin. */
4275 sc->syninfo.margin_bottom = 200;
4276 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
4277 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4278 "margin_bottom", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4279 &sc->syninfo.margin_bottom, SYNAPTICS_SYSCTL_MARGIN_BOTTOM,
4280 synaptics_sysctl, "I",
4283 /* hw.psm.synaptics.left_margin. */
4284 sc->syninfo.margin_left = 200;
4285 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
4286 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4287 "margin_left", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4288 &sc->syninfo.margin_left, SYNAPTICS_SYSCTL_MARGIN_LEFT,
4289 synaptics_sysctl, "I",
4292 /* hw.psm.synaptics.na_top. */
4293 sc->syninfo.na_top = 1783;
4294 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
4295 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4296 "na_top", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4297 &sc->syninfo.na_top, SYNAPTICS_SYSCTL_NA_TOP,
4298 synaptics_sysctl, "I",
4299 "Top noisy area, where weight_previous_na is used instead "
4300 "of weight_previous");
4302 /* hw.psm.synaptics.na_right. */
4303 sc->syninfo.na_right = 563;
4304 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
4305 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4306 "na_right", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4307 &sc->syninfo.na_right, SYNAPTICS_SYSCTL_NA_RIGHT,
4308 synaptics_sysctl, "I",
4309 "Right noisy area, where weight_previous_na is used instead "
4310 "of weight_previous");
4312 /* hw.psm.synaptics.na_bottom. */
4313 sc->syninfo.na_bottom = 1408;
4314 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
4315 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4316 "na_bottom", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4317 &sc->syninfo.na_bottom, SYNAPTICS_SYSCTL_NA_BOTTOM,
4318 synaptics_sysctl, "I",
4319 "Bottom noisy area, where weight_previous_na is used instead "
4320 "of weight_previous");
4322 /* hw.psm.synaptics.na_left. */
4323 sc->syninfo.na_left = 1600;
4324 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
4325 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4326 "na_left", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4327 &sc->syninfo.na_left, SYNAPTICS_SYSCTL_NA_LEFT,
4328 synaptics_sysctl, "I",
4329 "Left noisy area, where weight_previous_na is used instead "
4330 "of weight_previous");
4332 /* hw.psm.synaptics.window_min. */
4333 sc->syninfo.window_min = 4;
4334 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
4335 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4336 "window_min", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4337 &sc->syninfo.window_min, SYNAPTICS_SYSCTL_WINDOW_MIN,
4338 synaptics_sysctl, "I",
4339 "Minimum window size to start an action");
4341 /* hw.psm.synaptics.window_max. */
4342 sc->syninfo.window_max = 10;
4343 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
4344 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4345 "window_max", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4346 &sc->syninfo.window_max, SYNAPTICS_SYSCTL_WINDOW_MAX,
4347 synaptics_sysctl, "I",
4348 "Maximum window size");
4350 /* hw.psm.synaptics.multiplicator. */
4351 sc->syninfo.multiplicator = 10000;
4352 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
4353 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4354 "multiplicator", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4355 &sc->syninfo.multiplicator, SYNAPTICS_SYSCTL_MULTIPLICATOR,
4356 synaptics_sysctl, "I",
4357 "Multiplicator to increase precision in averages and divisions");
4359 /* hw.psm.synaptics.weight_current. */
4360 sc->syninfo.weight_current = 3;
4361 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
4362 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4363 "weight_current", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4364 &sc->syninfo.weight_current, SYNAPTICS_SYSCTL_WEIGHT_CURRENT,
4365 synaptics_sysctl, "I",
4366 "Weight of the current movement in the new average");
4368 /* hw.psm.synaptics.weight_previous. */
4369 sc->syninfo.weight_previous = 6;
4370 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
4371 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4372 "weight_previous", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4373 &sc->syninfo.weight_previous, SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS,
4374 synaptics_sysctl, "I",
4375 "Weight of the previous average");
4377 /* hw.psm.synaptics.weight_previous_na. */
4378 sc->syninfo.weight_previous_na = 20;
4379 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
4380 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4381 "weight_previous_na", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4382 &sc->syninfo.weight_previous_na,
4383 SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS_NA,
4384 synaptics_sysctl, "I",
4385 "Weight of the previous average (inside the noisy area)");
4387 /* hw.psm.synaptics.weight_len_squared. */
4388 sc->syninfo.weight_len_squared = 2000;
4389 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
4390 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4391 "weight_len_squared", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4392 &sc->syninfo.weight_len_squared,
4393 SYNAPTICS_SYSCTL_WEIGHT_LEN_SQUARED,
4394 synaptics_sysctl, "I",
4395 "Length (squared) of segments where weight_previous "
4396 "starts to decrease");
4398 /* hw.psm.synaptics.div_min. */
4399 sc->syninfo.div_min = 9;
4400 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
4401 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4402 "div_min", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4403 &sc->syninfo.div_min, SYNAPTICS_SYSCTL_DIV_MIN,
4404 synaptics_sysctl, "I",
4405 "Divisor for fast movements");
4407 /* hw.psm.synaptics.div_max. */
4408 sc->syninfo.div_max = 17;
4409 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
4410 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4411 "div_max", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4412 &sc->syninfo.div_max, SYNAPTICS_SYSCTL_DIV_MAX,
4413 synaptics_sysctl, "I",
4414 "Divisor for slow movements");
4416 /* hw.psm.synaptics.div_max_na. */
4417 sc->syninfo.div_max_na = 30;
4418 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
4419 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4420 "div_max_na", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4421 &sc->syninfo.div_max_na, SYNAPTICS_SYSCTL_DIV_MAX_NA,
4422 synaptics_sysctl, "I",
4423 "Divisor with slow movements (inside the noisy area)");
4425 /* hw.psm.synaptics.div_len. */
4426 sc->syninfo.div_len = 100;
4427 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
4428 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4429 "div_len", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4430 &sc->syninfo.div_len, SYNAPTICS_SYSCTL_DIV_LEN,
4431 synaptics_sysctl, "I",
4432 "Length of segments where div_max starts to decrease");
4434 /* hw.psm.synaptics.tap_max_delta. */
4435 sc->syninfo.tap_max_delta = 80;
4436 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
4437 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4438 "tap_max_delta", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4439 &sc->syninfo.tap_max_delta, SYNAPTICS_SYSCTL_TAP_MAX_DELTA,
4440 synaptics_sysctl, "I",
4441 "Length of segments above which a tap is ignored");
4443 /* hw.psm.synaptics.tap_min_queue. */
4444 sc->syninfo.tap_min_queue = 2;
4445 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
4446 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4447 "tap_min_queue", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4448 &sc->syninfo.tap_min_queue, SYNAPTICS_SYSCTL_TAP_MIN_QUEUE,
4449 synaptics_sysctl, "I",
4450 "Number of packets required to consider a tap");
4452 /* hw.psm.synaptics.taphold_timeout. */
4453 sc->synaction.in_taphold = 0;
4454 sc->syninfo.taphold_timeout = tap_timeout;
4455 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
4456 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4457 "taphold_timeout", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4458 &sc->syninfo.taphold_timeout, SYNAPTICS_SYSCTL_TAPHOLD_TIMEOUT,
4459 synaptics_sysctl, "I",
4460 "Maximum elapsed time between two taps to consider a tap-hold "
4463 /* hw.psm.synaptics.vscroll_hor_area. */
4464 sc->syninfo.vscroll_hor_area = 0; /* 1300 */
4465 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
4466 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4467 "vscroll_hor_area", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4468 &sc->syninfo.vscroll_hor_area, SYNAPTICS_SYSCTL_VSCROLL_HOR_AREA,
4469 synaptics_sysctl, "I",
4470 "Area reserved for horizontal virtual scrolling");
4472 /* hw.psm.synaptics.vscroll_ver_area. */
4473 sc->syninfo.vscroll_ver_area = -600;
4474 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
4475 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4476 "vscroll_ver_area", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4477 &sc->syninfo.vscroll_ver_area, SYNAPTICS_SYSCTL_VSCROLL_VER_AREA,
4478 synaptics_sysctl, "I",
4479 "Area reserved for vertical virtual scrolling");
4481 /* hw.psm.synaptics.vscroll_min_delta. */
4482 sc->syninfo.vscroll_min_delta = 50;
4483 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
4484 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4485 "vscroll_min_delta", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4486 &sc->syninfo.vscroll_min_delta,
4487 SYNAPTICS_SYSCTL_VSCROLL_MIN_DELTA,
4488 synaptics_sysctl, "I",
4489 "Minimum movement to consider virtual scrolling");
4491 /* hw.psm.synaptics.vscroll_div_min. */
4492 sc->syninfo.vscroll_div_min = 100;
4493 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
4494 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4495 "vscroll_div_min", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4496 &sc->syninfo.vscroll_div_min, SYNAPTICS_SYSCTL_VSCROLL_DIV_MIN,
4497 synaptics_sysctl, "I",
4498 "Divisor for fast scrolling");
4500 /* hw.psm.synaptics.vscroll_div_min. */
4501 sc->syninfo.vscroll_div_max = 150;
4502 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
4503 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4504 "vscroll_div_max", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4505 &sc->syninfo.vscroll_div_max, SYNAPTICS_SYSCTL_VSCROLL_DIV_MAX,
4506 synaptics_sysctl, "I",
4507 "Divisor for slow scrolling");
4509 /* hw.psm.synaptics.touchpad_off. */
4510 sc->syninfo.touchpad_off = 0;
4511 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
4512 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
4513 "touchpad_off", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4514 &sc->syninfo.touchpad_off, SYNAPTICS_SYSCTL_TOUCHPAD_OFF,
4515 synaptics_sysctl, "I",
4516 "Turn off touchpad");
4520 synaptics_preferred_mode(struct psm_softc *sc) {
4525 /* request wmode where available */
4526 if (sc->synhw.capExtended)
4530 * Disable gesture processing when native packets are requested. This
4531 * enables sending of encapsulated "extended W mode" packets.
4533 if (sc->mode.level == PSM_LEVEL_NATIVE)
4534 mode_byte |= (1 << 2);
4540 synaptics_set_mode(struct psm_softc *sc, int mode_byte) {
4541 mouse_ext_command(sc->kbdc, mode_byte);
4543 /* "Commit" the Set Mode Byte command sent above. */
4544 set_mouse_sampling_rate(sc->kbdc, 20);
4547 * Enable advanced gestures mode if supported and we are not entering
4550 if (sc->synhw.capAdvancedGestures && !(mode_byte & (1 << 5))) {
4551 mouse_ext_command(sc->kbdc, 3);
4552 set_mouse_sampling_rate(sc->kbdc, 0xc8);
4557 enable_synaptics(struct psm_softc *sc, enum probearg arg)
4559 KBDC kbdc = sc->kbdc;
4560 synapticshw_t synhw;
4564 VLOG(3, (LOG_DEBUG, "synaptics: BEGIN init\n"));
4567 * Just to be on the safe side: this avoids troubles with
4568 * following mouse_ext_command() when the previous command
4569 * was PSMC_SET_RESOLUTION. Set Scaling has no effect on
4570 * Synaptics Touchpad behaviour.
4572 set_mouse_scaling(kbdc, 1);
4574 /* Identify the Touchpad version. */
4575 if (mouse_ext_command(kbdc, 0) == 0)
4577 if (get_mouse_status(kbdc, status, 0, 3) != 3)
4579 if (status[1] != 0x47)
4582 bzero(&synhw, sizeof(synhw));
4583 synhw.infoMinor = status[0];
4584 synhw.infoMajor = status[2] & 0x0f;
4587 printf("Synaptics Touchpad v%d.%d\n", synhw.infoMajor,
4590 if (synhw.infoMajor < 4) {
4591 printf(" Unsupported (pre-v4) Touchpad detected\n");
4595 /* Get the Touchpad model information. */
4596 if (mouse_ext_command(kbdc, 3) == 0)
4598 if (get_mouse_status(kbdc, status, 0, 3) != 3)
4600 if ((status[1] & 0x01) != 0) {
4601 printf(" Failed to read model information\n");
4605 synhw.infoRot180 = (status[0] & 0x80) != 0;
4606 synhw.infoPortrait = (status[0] & 0x40) != 0;
4607 synhw.infoSensor = status[0] & 0x3f;
4608 synhw.infoHardware = (status[1] & 0xfe) >> 1;
4609 synhw.infoNewAbs = (status[2] & 0x80) != 0;
4610 synhw.capPen = (status[2] & 0x40) != 0;
4611 synhw.infoSimplC = (status[2] & 0x20) != 0;
4612 synhw.infoGeometry = status[2] & 0x0f;
4615 printf(" Model information:\n");
4616 printf(" infoRot180: %d\n", synhw.infoRot180);
4617 printf(" infoPortrait: %d\n", synhw.infoPortrait);
4618 printf(" infoSensor: %d\n", synhw.infoSensor);
4619 printf(" infoHardware: %d\n", synhw.infoHardware);
4620 printf(" infoNewAbs: %d\n", synhw.infoNewAbs);
4621 printf(" capPen: %d\n", synhw.capPen);
4622 printf(" infoSimplC: %d\n", synhw.infoSimplC);
4623 printf(" infoGeometry: %d\n", synhw.infoGeometry);
4626 /* Read the extended capability bits. */
4627 if (mouse_ext_command(kbdc, 2) == 0)
4629 if (get_mouse_status(kbdc, status, 0, 3) != 3)
4631 if (!SYNAPTICS_VERSION_GE(synhw, 7, 5) && status[1] != 0x47) {
4632 printf(" Failed to read extended capability bits\n");
4636 /* Set the different capabilities when they exist. */
4638 synhw.capExtended = (status[0] & 0x80) != 0;
4639 if (synhw.capExtended) {
4640 synhw.nExtendedQueries = (status[0] & 0x70) >> 4;
4641 synhw.capMiddle = (status[0] & 0x04) != 0;
4642 synhw.capPassthrough = (status[2] & 0x80) != 0;
4643 synhw.capLowPower = (status[2] & 0x40) != 0;
4644 synhw.capMultiFingerReport =
4645 (status[2] & 0x20) != 0;
4646 synhw.capSleep = (status[2] & 0x10) != 0;
4647 synhw.capFourButtons = (status[2] & 0x08) != 0;
4648 synhw.capBallistics = (status[2] & 0x04) != 0;
4649 synhw.capMultiFinger = (status[2] & 0x02) != 0;
4650 synhw.capPalmDetect = (status[2] & 0x01) != 0;
4652 if (!set_mouse_scaling(kbdc, 1))
4654 if (mouse_ext_command(kbdc, 0x08) == 0)
4656 if (get_mouse_status(kbdc, status, 0, 3) != 3)
4659 synhw.infoXupmm = status[0];
4660 synhw.infoYupmm = status[2];
4663 printf(" Extended capabilities:\n");
4664 printf(" capExtended: %d\n", synhw.capExtended);
4665 printf(" capMiddle: %d\n", synhw.capMiddle);
4666 printf(" nExtendedQueries: %d\n",
4667 synhw.nExtendedQueries);
4668 printf(" capPassthrough: %d\n", synhw.capPassthrough);
4669 printf(" capLowPower: %d\n", synhw.capLowPower);
4670 printf(" capMultiFingerReport: %d\n",
4671 synhw.capMultiFingerReport);
4672 printf(" capSleep: %d\n", synhw.capSleep);
4673 printf(" capFourButtons: %d\n", synhw.capFourButtons);
4674 printf(" capBallistics: %d\n", synhw.capBallistics);
4675 printf(" capMultiFinger: %d\n", synhw.capMultiFinger);
4676 printf(" capPalmDetect: %d\n", synhw.capPalmDetect);
4677 printf(" infoXupmm: %d\n", synhw.infoXupmm);
4678 printf(" infoYupmm: %d\n", synhw.infoYupmm);
4682 * If nExtendedQueries is 1 or greater, then the TouchPad
4683 * supports this number of extended queries. We can load
4684 * more information about buttons using query 0x09.
4686 if (synhw.nExtendedQueries >= 1) {
4687 if (!set_mouse_scaling(kbdc, 1))
4689 if (mouse_ext_command(kbdc, 0x09) == 0)
4691 if (get_mouse_status(kbdc, status, 0, 3) != 3)
4693 synhw.verticalScroll = (status[0] & 0x01) != 0;
4694 synhw.horizontalScroll = (status[0] & 0x02) != 0;
4695 synhw.verticalWheel = (status[0] & 0x08) != 0;
4696 synhw.nExtendedButtons = (status[1] & 0xf0) >> 4;
4697 synhw.capEWmode = (status[0] & 0x04) != 0;
4699 printf(" Extended model ID:\n");
4700 printf(" verticalScroll: %d\n",
4701 synhw.verticalScroll);
4702 printf(" horizontalScroll: %d\n",
4703 synhw.horizontalScroll);
4704 printf(" verticalWheel: %d\n",
4705 synhw.verticalWheel);
4706 printf(" nExtendedButtons: %d\n",
4707 synhw.nExtendedButtons);
4708 printf(" capEWmode: %d\n",
4712 * Add the number of extended buttons to the total
4713 * button support count, including the middle button
4714 * if capMiddle support bit is set.
4716 buttons = synhw.nExtendedButtons + synhw.capMiddle;
4719 * If the capFourButtons support bit is set,
4720 * add a fourth button to the total button count.
4722 buttons = synhw.capFourButtons ? 1 : 0;
4724 /* Read the continued capabilities bits. */
4725 if (synhw.nExtendedQueries >= 4) {
4726 if (!set_mouse_scaling(kbdc, 1))
4728 if (mouse_ext_command(kbdc, 0x0c) == 0)
4730 if (get_mouse_status(kbdc, status, 0, 3) != 3)
4733 synhw.capClickPad = (status[1] & 0x01) << 1;
4734 synhw.capClickPad |= (status[0] & 0x10) != 0;
4735 synhw.capDeluxeLEDs = (status[1] & 0x02) != 0;
4736 synhw.noAbsoluteFilter = (status[1] & 0x04) != 0;
4737 synhw.capReportsV = (status[1] & 0x08) != 0;
4738 synhw.capUniformClickPad = (status[1] & 0x10) != 0;
4739 synhw.capReportsMin = (status[1] & 0x20) != 0;
4740 synhw.capInterTouch = (status[1] & 0x40) != 0;
4741 synhw.capReportsMax = (status[0] & 0x02) != 0;
4742 synhw.capClearPad = (status[0] & 0x04) != 0;
4743 synhw.capAdvancedGestures = (status[0] & 0x08) != 0;
4744 synhw.capCoveredPad = (status[0] & 0x80) != 0;
4746 if (synhw.capReportsMax) {
4747 if (!set_mouse_scaling(kbdc, 1))
4749 if (mouse_ext_command(kbdc, 0x0d) == 0)
4751 if (get_mouse_status(kbdc, status, 0, 3) != 3)
4754 synhw.maximumXCoord = (status[0] << 5) |
4755 ((status[1] & 0x0f) << 1);
4756 synhw.maximumYCoord = (status[2] << 5) |
4757 ((status[1] & 0xf0) >> 3);
4759 if (synhw.capReportsMin) {
4760 if (!set_mouse_scaling(kbdc, 1))
4762 if (mouse_ext_command(kbdc, 0x0f) == 0)
4764 if (get_mouse_status(kbdc, status, 0, 3) != 3)
4767 synhw.minimumXCoord = (status[0] << 5) |
4768 ((status[1] & 0x0f) << 1);
4769 synhw.minimumYCoord = (status[2] << 5) |
4770 ((status[1] & 0xf0) >> 3);
4774 printf(" Continued capabilities:\n");
4775 printf(" capClickPad: %d\n",
4777 printf(" capDeluxeLEDs: %d\n",
4778 synhw.capDeluxeLEDs);
4779 printf(" noAbsoluteFilter: %d\n",
4780 synhw.noAbsoluteFilter);
4781 printf(" capReportsV: %d\n",
4783 printf(" capUniformClickPad: %d\n",
4784 synhw.capUniformClickPad);
4785 printf(" capReportsMin: %d\n",
4786 synhw.capReportsMin);
4787 printf(" capInterTouch: %d\n",
4788 synhw.capInterTouch);
4789 printf(" capReportsMax: %d\n",
4790 synhw.capReportsMax);
4791 printf(" capClearPad: %d\n",
4793 printf(" capAdvancedGestures: %d\n",
4794 synhw.capAdvancedGestures);
4795 printf(" capCoveredPad: %d\n",
4796 synhw.capCoveredPad);
4797 if (synhw.capReportsMax) {
4798 printf(" maximumXCoord: %d\n",
4799 synhw.maximumXCoord);
4800 printf(" maximumYCoord: %d\n",
4801 synhw.maximumYCoord);
4803 if (synhw.capReportsMin) {
4804 printf(" minimumXCoord: %d\n",
4805 synhw.minimumXCoord);
4806 printf(" minimumYCoord: %d\n",
4807 synhw.minimumYCoord);
4810 buttons += synhw.capClickPad;
4815 if (synhw.capExtended)
4816 printf(" Additional Buttons: %d\n", buttons);
4818 printf(" No extended capabilities\n");
4822 * Add the default number of 3 buttons to the total
4823 * count of supported buttons reported above.
4828 * Read the mode byte.
4830 * XXX: Note the Synaptics documentation also defines the first
4831 * byte of the response to this query to be a constant 0x3b, this
4832 * does not appear to be true for Touchpads with guest devices.
4834 if (mouse_ext_command(kbdc, 1) == 0)
4836 if (get_mouse_status(kbdc, status, 0, 3) != 3)
4838 if (!SYNAPTICS_VERSION_GE(synhw, 7, 5) && status[1] != 0x47) {
4839 printf(" Failed to read mode byte\n");
4845 if (!synaptics_support)
4848 synaptics_set_mode(sc, synaptics_preferred_mode(sc));
4850 if (trackpoint_support && synhw.capPassthrough) {
4851 enable_trackpoint(sc, arg);
4854 VLOG(3, (LOG_DEBUG, "synaptics: END init (%d buttons)\n", buttons));
4857 /* Create sysctl tree. */
4858 synaptics_sysctl_create_tree(sc);
4859 sc->hw.buttons = buttons;
4866 synaptics_passthrough_on(struct psm_softc *sc)
4868 VLOG(2, (LOG_NOTICE, "psm: setting pass-through mode.\n"));
4869 synaptics_set_mode(sc, synaptics_preferred_mode(sc) | (1 << 5));
4873 synaptics_passthrough_off(struct psm_softc *sc)
4875 VLOG(2, (LOG_NOTICE, "psm: turning pass-through mode off.\n"));
4876 set_mouse_scaling(sc->kbdc, 2);
4877 set_mouse_scaling(sc->kbdc, 1);
4878 synaptics_set_mode(sc, synaptics_preferred_mode(sc));
4881 /* IBM/Lenovo TrackPoint */
4883 trackpoint_command(struct psm_softc *sc, int cmd, int loc, int val)
4885 const int seq[] = { 0xe2, cmd, loc, val };
4888 if (sc->synhw.capPassthrough)
4889 synaptics_passthrough_on(sc);
4891 for (i = 0; i < nitems(seq); i++) {
4892 if (sc->synhw.capPassthrough &&
4893 (seq[i] == 0xff || seq[i] == 0xe7))
4894 if (send_aux_command(sc->kbdc, 0xe7) != PSM_ACK) {
4895 synaptics_passthrough_off(sc);
4898 if (send_aux_command(sc->kbdc, seq[i]) != PSM_ACK) {
4899 if (sc->synhw.capPassthrough)
4900 synaptics_passthrough_off(sc);
4905 if (sc->synhw.capPassthrough)
4906 synaptics_passthrough_off(sc);
4911 #define PSM_TPINFO(x) offsetof(struct psm_softc, tpinfo.x)
4917 trackpoint_sysctl(SYSCTL_HANDLER_ARGS)
4919 static const int data[][3] = {
4920 { 0x00, 0x4a, PSM_TPINFO(sensitivity) },
4921 { 0x00, 0x4d, PSM_TPINFO(inertia) },
4922 { 0x00, 0x60, PSM_TPINFO(uplateau) },
4923 { 0x00, 0x57, PSM_TPINFO(reach) },
4924 { 0x00, 0x58, PSM_TPINFO(draghys) },
4925 { 0x00, 0x59, PSM_TPINFO(mindrag) },
4926 { 0x00, 0x5a, PSM_TPINFO(upthresh) },
4927 { 0x00, 0x5c, PSM_TPINFO(threshold) },
4928 { 0x00, 0x5d, PSM_TPINFO(jenks) },
4929 { 0x00, 0x5e, PSM_TPINFO(ztime) },
4930 { 0x01, 0x2c, PSM_TPINFO(pts) },
4931 { 0x08, 0x2d, PSM_TPINFO(skipback) }
4933 struct psm_softc *sc;
4934 int error, newval, *oldvalp;
4937 if (arg1 == NULL || arg2 < 0 || arg2 >= nitems(data))
4941 oldvalp = (int *)((intptr_t)sc + tp[TPINFO]);
4943 error = sysctl_handle_int(oidp, &newval, 0, req);
4946 if (newval == *oldvalp)
4948 if (newval < 0 || newval > (tp[TPMASK] == 0 ? 255 : 1))
4950 error = trackpoint_command(sc, tp[TPMASK] == 0 ? 0x81 : 0x47,
4951 tp[TPLOC], tp[TPMASK] == 0 ? newval : tp[TPMASK]);
4960 trackpoint_sysctl_create_tree(struct psm_softc *sc)
4963 if (sc->tpinfo.sysctl_tree != NULL)
4966 /* Attach extra trackpoint sysctl nodes under hw.psm.trackpoint */
4967 sysctl_ctx_init(&sc->tpinfo.sysctl_ctx);
4968 sc->tpinfo.sysctl_tree = SYSCTL_ADD_NODE(&sc->tpinfo.sysctl_ctx,
4969 SYSCTL_STATIC_CHILDREN(_hw_psm), OID_AUTO, "trackpoint", CTLFLAG_RD,
4970 0, "IBM/Lenovo TrackPoint");
4972 /* hw.psm.trackpoint.sensitivity */
4973 sc->tpinfo.sensitivity = 0x80;
4974 SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
4975 SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
4976 "sensitivity", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4977 sc, TRACKPOINT_SYSCTL_SENSITIVITY,
4978 trackpoint_sysctl, "I",
4981 /* hw.psm.trackpoint.negative_inertia */
4982 sc->tpinfo.inertia = 0x06;
4983 SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
4984 SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
4985 "negative_inertia", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4986 sc, TRACKPOINT_SYSCTL_NEGATIVE_INERTIA,
4987 trackpoint_sysctl, "I",
4988 "Negative inertia factor");
4990 /* hw.psm.trackpoint.upper_plateau */
4991 sc->tpinfo.uplateau = 0x61;
4992 SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
4993 SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
4994 "upper_plateau", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
4995 sc, TRACKPOINT_SYSCTL_UPPER_PLATEAU,
4996 trackpoint_sysctl, "I",
4997 "Transfer function upper plateau speed");
4999 /* hw.psm.trackpoint.backup_range */
5000 sc->tpinfo.reach = 0x0a;
5001 SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
5002 SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
5003 "backup_range", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
5004 sc, TRACKPOINT_SYSCTL_BACKUP_RANGE,
5005 trackpoint_sysctl, "I",
5008 /* hw.psm.trackpoint.drag_hysteresis */
5009 sc->tpinfo.draghys = 0xff;
5010 SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
5011 SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
5012 "drag_hysteresis", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
5013 sc, TRACKPOINT_SYSCTL_DRAG_HYSTERESIS,
5014 trackpoint_sysctl, "I",
5017 /* hw.psm.trackpoint.minimum_drag */
5018 sc->tpinfo.mindrag = 0x14;
5019 SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
5020 SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
5021 "minimum_drag", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
5022 sc, TRACKPOINT_SYSCTL_MINIMUM_DRAG,
5023 trackpoint_sysctl, "I",
5026 /* hw.psm.trackpoint.up_threshold */
5027 sc->tpinfo.upthresh = 0xff;
5028 SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
5029 SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
5030 "up_threshold", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
5031 sc, TRACKPOINT_SYSCTL_UP_THRESHOLD,
5032 trackpoint_sysctl, "I",
5033 "Up threshold for release");
5035 /* hw.psm.trackpoint.threshold */
5036 sc->tpinfo.threshold = 0x08;
5037 SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
5038 SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
5039 "threshold", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
5040 sc, TRACKPOINT_SYSCTL_THRESHOLD,
5041 trackpoint_sysctl, "I",
5044 /* hw.psm.trackpoint.jenks_curvature */
5045 sc->tpinfo.jenks = 0x87;
5046 SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
5047 SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
5048 "jenks_curvature", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
5049 sc, TRACKPOINT_SYSCTL_JENKS_CURVATURE,
5050 trackpoint_sysctl, "I",
5053 /* hw.psm.trackpoint.z_time */
5054 sc->tpinfo.ztime = 0x26;
5055 SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
5056 SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
5057 "z_time", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
5058 sc, TRACKPOINT_SYSCTL_Z_TIME,
5059 trackpoint_sysctl, "I",
5062 /* hw.psm.trackpoint.press_to_select */
5063 sc->tpinfo.pts = 0x00;
5064 SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
5065 SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
5066 "press_to_select", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
5067 sc, TRACKPOINT_SYSCTL_PRESS_TO_SELECT,
5068 trackpoint_sysctl, "I",
5071 /* hw.psm.trackpoint.skip_backups */
5072 sc->tpinfo.skipback = 0x00;
5073 SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
5074 SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
5075 "skip_backups", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
5076 sc, TRACKPOINT_SYSCTL_SKIP_BACKUPS,
5077 trackpoint_sysctl, "I",
5078 "Skip backups from drags");
5082 set_trackpoint_parameters(struct psm_softc *sc)
5084 trackpoint_command(sc, 0x81, 0x4a, sc->tpinfo.sensitivity);
5085 trackpoint_command(sc, 0x81, 0x60, sc->tpinfo.uplateau);
5086 trackpoint_command(sc, 0x81, 0x4d, sc->tpinfo.inertia);
5087 trackpoint_command(sc, 0x81, 0x57, sc->tpinfo.reach);
5088 trackpoint_command(sc, 0x81, 0x58, sc->tpinfo.draghys);
5089 trackpoint_command(sc, 0x81, 0x59, sc->tpinfo.mindrag);
5090 trackpoint_command(sc, 0x81, 0x5a, sc->tpinfo.upthresh);
5091 trackpoint_command(sc, 0x81, 0x5c, sc->tpinfo.threshold);
5092 trackpoint_command(sc, 0x81, 0x5d, sc->tpinfo.jenks);
5093 trackpoint_command(sc, 0x81, 0x5e, sc->tpinfo.ztime);
5094 if (sc->tpinfo.pts == 0x01)
5095 trackpoint_command(sc, 0x47, 0x2c, 0x01);
5096 if (sc->tpinfo.skipback == 0x01)
5097 trackpoint_command(sc, 0x47, 0x2d, 0x08);
5101 enable_trackpoint(struct psm_softc *sc, enum probearg arg)
5103 KBDC kbdc = sc->kbdc;
5107 * If called from enable_synaptics(), make sure that passthrough
5108 * mode is enabled so we can reach the trackpoint.
5109 * However, passthrough mode must be disabled before setting the
5110 * trackpoint parameters, as rackpoint_command() enables and disables
5111 * passthrough mode on its own.
5113 if (sc->synhw.capPassthrough)
5114 synaptics_passthrough_on(sc);
5116 if (send_aux_command(kbdc, 0xe1) != PSM_ACK ||
5117 read_aux_data(kbdc) != 0x01)
5119 id = read_aux_data(kbdc);
5124 if (!trackpoint_support)
5127 if (sc->synhw.capPassthrough)
5128 synaptics_passthrough_off(sc);
5131 trackpoint_sysctl_create_tree(sc);
5133 * Don't overwrite hwid and buttons when we are
5136 if (!sc->synhw.capPassthrough) {
5142 set_trackpoint_parameters(sc);
5147 if (sc->synhw.capPassthrough)
5148 synaptics_passthrough_off(sc);
5153 /* Interlink electronics VersaPad */
5155 enable_versapad(struct psm_softc *sc, enum probearg arg)
5157 KBDC kbdc = sc->kbdc;
5160 set_mouse_resolution(kbdc, PSMD_RES_MEDIUM_HIGH); /* set res. 2 */
5161 set_mouse_sampling_rate(kbdc, 100); /* set rate 100 */
5162 set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
5163 set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
5164 set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
5165 set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
5166 if (get_mouse_status(kbdc, data, 0, 3) < 3) /* get status */
5168 if (data[2] != 0xa || data[1] != 0 ) /* rate == 0xa && res. == 0 */
5170 set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
5172 return (TRUE); /* PS/2 absolute mode */
5176 * Return true if 'now' is earlier than (start + (secs.usecs)).
5177 * Now may be NULL and the function will fetch the current time from
5178 * getmicrouptime(), or a cached 'now' can be passed in.
5179 * All values should be numbers derived from getmicrouptime().
5182 timeelapsed(start, secs, usecs, now)
5183 const struct timeval *start, *now;
5186 struct timeval snow, tv;
5188 /* if there is no 'now' passed in, the get it as a convience. */
5190 getmicrouptime(&snow);
5196 timevaladd(&tv, start);
5197 return (timevalcmp(&tv, now, <));
5201 psmresume(device_t dev)
5203 struct psm_softc *sc = device_get_softc(dev);
5204 int unit = device_get_unit(dev);
5207 VLOG(2, (LOG_NOTICE, "psm%d: system resume hook called.\n", unit));
5210 (PSM_CONFIG_HOOKRESUME | PSM_CONFIG_INITAFTERSUSPEND)) == 0)
5213 err = reinitialize(sc, sc->config & PSM_CONFIG_INITAFTERSUSPEND);
5215 if ((sc->state & PSM_ASLP) && !(sc->state & PSM_VALID)) {
5217 * Release the blocked process; it must be notified that
5218 * the device cannot be accessed anymore.
5220 sc->state &= ~PSM_ASLP;
5224 VLOG(2, (LOG_DEBUG, "psm%d: system resume hook exiting.\n", unit));
5229 DRIVER_MODULE(psm, atkbdc, psm_driver, psm_devclass, 0, 0);
5234 * This sucks up assignments from PNPBIOS and ACPI.
5238 * When the PS/2 mouse device is reported by ACPI or PnP BIOS, it may
5239 * appear BEFORE the AT keyboard controller. As the PS/2 mouse device
5240 * can be probed and attached only after the AT keyboard controller is
5241 * attached, we shall quietly reserve the IRQ resource for later use.
5242 * If the PS/2 mouse device is reported to us AFTER the keyboard controller,
5243 * copy the IRQ resource to the PS/2 mouse device instance hanging
5244 * under the keyboard controller, then probe and attach it.
5247 static devclass_t psmcpnp_devclass;
5249 static device_probe_t psmcpnp_probe;
5250 static device_attach_t psmcpnp_attach;
5252 static device_method_t psmcpnp_methods[] = {
5253 DEVMETHOD(device_probe, psmcpnp_probe),
5254 DEVMETHOD(device_attach, psmcpnp_attach),
5259 static driver_t psmcpnp_driver = {
5260 PSMCPNP_DRIVER_NAME,
5265 static struct isa_pnp_id psmcpnp_ids[] = {
5266 { 0x030fd041, "PS/2 mouse port" }, /* PNP0F03 */
5267 { 0x0e0fd041, "PS/2 mouse port" }, /* PNP0F0E */
5268 { 0x120fd041, "PS/2 mouse port" }, /* PNP0F12 */
5269 { 0x130fd041, "PS/2 mouse port" }, /* PNP0F13 */
5270 { 0x1303d041, "PS/2 port" }, /* PNP0313, XXX */
5271 { 0x02002e4f, "Dell PS/2 mouse port" }, /* Lat. X200, Dell */
5272 { 0x0002a906, "ALPS Glide Point" }, /* ALPS Glide Point */
5273 { 0x80374d24, "IBM PS/2 mouse port" }, /* IBM3780, ThinkPad */
5274 { 0x81374d24, "IBM PS/2 mouse port" }, /* IBM3781, ThinkPad */
5275 { 0x0190d94d, "SONY VAIO PS/2 mouse port"}, /* SNY9001, Vaio */
5276 { 0x0290d94d, "SONY VAIO PS/2 mouse port"}, /* SNY9002, Vaio */
5277 { 0x0390d94d, "SONY VAIO PS/2 mouse port"}, /* SNY9003, Vaio */
5278 { 0x0490d94d, "SONY VAIO PS/2 mouse port"}, /* SNY9004, Vaio */
5283 create_a_copy(device_t atkbdc, device_t me)
5288 /* find the PS/2 mouse device instance under the keyboard controller */
5289 psm = device_find_child(atkbdc, PSM_DRIVER_NAME,
5290 device_get_unit(atkbdc));
5293 if (device_get_state(psm) != DS_NOTPRESENT)
5296 /* move our resource to the found device */
5297 irq = bus_get_resource_start(me, SYS_RES_IRQ, 0);
5298 bus_delete_resource(me, SYS_RES_IRQ, 0);
5299 bus_set_resource(psm, SYS_RES_IRQ, KBDC_RID_AUX, irq, 1);
5301 /* ...then probe and attach it */
5302 return (device_probe_and_attach(psm));
5306 psmcpnp_probe(device_t dev)
5308 struct resource *res;
5312 if (ISA_PNP_PROBE(device_get_parent(dev), dev, psmcpnp_ids))
5316 * The PnP BIOS and ACPI are supposed to assign an IRQ (12)
5317 * to the PS/2 mouse device node. But, some buggy PnP BIOS
5318 * declares the PS/2 mouse device node without an IRQ resource!
5319 * If this happens, we shall refer to device hints.
5320 * If we still don't find it there, use a hardcoded value... XXX
5323 irq = bus_get_resource_start(dev, SYS_RES_IRQ, rid);
5325 if (resource_long_value(PSM_DRIVER_NAME,
5326 device_get_unit(dev),"irq", &irq) != 0)
5328 device_printf(dev, "irq resource info is missing; "
5329 "assuming irq %ld\n", irq);
5330 bus_set_resource(dev, SYS_RES_IRQ, rid, irq, 1);
5332 res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 0);
5333 bus_release_resource(dev, SYS_RES_IRQ, rid, res);
5339 return ((res == NULL) ? ENXIO : 0);
5343 psmcpnp_attach(device_t dev)
5347 /* find the keyboard controller, which may be on acpi* or isa* bus */
5348 atkbdc = devclass_get_device(devclass_find(ATKBDC_DRIVER_NAME),
5349 device_get_unit(dev));
5350 if ((atkbdc != NULL) && (device_get_state(atkbdc) == DS_ATTACHED))
5351 create_a_copy(atkbdc, dev);
5356 DRIVER_MODULE(psmcpnp, isa, psmcpnp_driver, psmcpnp_devclass, 0, 0);
5357 DRIVER_MODULE(psmcpnp, acpi, psmcpnp_driver, psmcpnp_devclass, 0, 0);
5359 #endif /* DEV_ISA */