2 * Copyright (c) 1992, 1993 Erik Forsberg.
3 * Copyright (c) 1996, 1997 Kazutaka YOKOTA.
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
12 * THIS SOFTWARE IS PROVIDED BY ``AS IS'' AND ANY EXPRESS OR IMPLIED
13 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
14 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
15 * NO EVENT SHALL I BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
16 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
17 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
18 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
19 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
20 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
21 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
24 * Ported to 386bsd Oct 17, 1992
25 * Sandi Donno, Computer Science, University of Cape Town, South Africa
26 * Please send bug reports to sandi@cs.uct.ac.za
28 * Thanks are also due to Rick Macklem, rick@snowhite.cis.uoguelph.ca -
29 * although I was only partially successful in getting the alpha release
30 * of his "driver for the Logitech and ATI Inport Bus mice for use with
31 * 386bsd and the X386 port" to work with my Microsoft mouse, I nevertheless
32 * found his code to be an invaluable reference when porting this driver
35 * Further modifications for latest 386BSD+patchkit and port to NetBSD,
36 * Andrew Herbert <andrew@werple.apana.org.au> - 8 June 1993
38 * Cloned from the Microsoft Bus Mouse driver, also by Erik Forsberg, by
39 * Andrew Herbert - 12 June 1993
41 * Modified for PS/2 mouse by Charles Hannum <mycroft@ai.mit.edu>
44 * Modified for PS/2 AUX mouse by Shoji Yuen <yuen@nuie.nagoya-u.ac.jp>
47 * Hardware access routines and probe logic rewritten by
48 * Kazutaka Yokota <yokota@zodiac.mech.utsunomiya-u.ac.jp>
49 * - 3, 14, 22 October 1996.
50 * - 12 November 1996. IOCTLs and rearranging `psmread', `psmioctl'...
51 * - 14, 30 November 1996. Uses `kbdio.c'.
52 * - 13 December 1996. Uses queuing version of `kbdio.c'.
53 * - January/February 1997. Tweaked probe logic for
54 * HiNote UltraII/Latitude/Armada laptops.
55 * - 30 July 1997. Added APM support.
56 * - 5 March 1997. Defined driver configuration flags (PSM_CONFIG_XXX).
57 * Improved sync check logic.
58 * Vendor specific support routines.
61 #include <sys/cdefs.h>
62 __FBSDID("$FreeBSD$");
66 #include "opt_evdev.h"
68 #include <sys/param.h>
69 #include <sys/systm.h>
70 #include <sys/kernel.h>
71 #include <sys/module.h>
74 #include <sys/filio.h>
75 #include <sys/mutex.h>
77 #include <sys/sigio.h>
78 #include <sys/signalvar.h>
79 #include <sys/syslog.h>
80 #include <machine/bus.h>
82 #include <sys/selinfo.h>
83 #include <sys/sysctl.h>
87 #include <sys/limits.h>
88 #include <sys/mouse.h>
89 #include <machine/resource.h>
92 #include <isa/isavar.h>
96 #include <dev/evdev/evdev.h>
97 #include <dev/evdev/input.h>
100 #include <dev/atkbdc/atkbdcreg.h>
101 #include <dev/atkbdc/psm.h>
104 * Driver specific options: the following options may be set by
105 * `options' statements in the kernel configuration file.
110 #define PSM_DEBUG 0 /*
111 * logging: 0: none, 1: brief, 2: verbose
112 * 3: sync errors, 4: all packets
115 #define VLOG(level, args) do { \
116 if (verbose >= level) \
120 #ifndef PSM_INPUT_TIMEOUT
121 #define PSM_INPUT_TIMEOUT 2000000 /* 2 sec */
124 #ifndef PSM_TAP_TIMEOUT
125 #define PSM_TAP_TIMEOUT 125000
128 #ifndef PSM_TAP_THRESHOLD
129 #define PSM_TAP_THRESHOLD 25
132 /* end of driver specific options */
134 #define PSMCPNP_DRIVER_NAME "psmcpnp"
136 struct psmcpnp_softc {
140 PSMCPNP_TOPBUTTONPAD,
141 } type; /* Based on PnP ID */
145 #define PSM_BUFSIZE 960
146 #define PSM_SMALLBUFSIZE 240
148 /* operation levels */
149 #define PSM_LEVEL_BASE 0
150 #define PSM_LEVEL_STANDARD 1
151 #define PSM_LEVEL_NATIVE 2
152 #define PSM_LEVEL_MIN PSM_LEVEL_BASE
153 #define PSM_LEVEL_MAX PSM_LEVEL_NATIVE
155 /* Active PS/2 multiplexing */
156 #define PSM_NOMUX (-1)
158 /* Logitech PS2++ protocol */
159 #define MOUSE_PS2PLUS_CHECKBITS(b) \
160 ((((b[2] & 0x03) << 2) | 0x02) == (b[1] & 0x0f))
161 #define MOUSE_PS2PLUS_PACKET_TYPE(b) \
162 (((b[0] & 0x30) >> 2) | ((b[1] & 0x30) >> 4))
165 typedef struct ringbuf {
166 int count; /* # of valid elements in the buffer */
167 int head; /* head pointer */
168 int tail; /* tail poiner */
169 u_char buf[PSM_BUFSIZE];
173 typedef struct packetbuf {
174 u_char ipacket[16]; /* interim input buffer */
175 int inputbytes; /* # of bytes in the input buffer */
178 #ifndef PSM_PACKETQUEUE
179 #define PSM_PACKETQUEUE 128
183 * Synaptics command definitions.
185 #define SYNAPTICS_READ_IDENTITY 0x00
186 #define SYNAPTICS_READ_MODES 0x01
187 #define SYNAPTICS_READ_CAPABILITIES 0x02
188 #define SYNAPTICS_READ_MODEL_ID 0x03
189 #define SYNAPTICS_READ_SERIAL_PREFIX 0x06
190 #define SYNAPTICS_READ_SERIAL_SUFFIX 0x07
191 #define SYNAPTICS_READ_RESOLUTIONS 0x08
192 #define SYNAPTICS_READ_EXTENDED 0x09
193 #define SYNAPTICS_READ_CAPABILITIES_CONT 0x0c
194 #define SYNAPTICS_READ_MAX_COORDS 0x0d
195 #define SYNAPTICS_READ_DELUXE_LED 0x0e
196 #define SYNAPTICS_READ_MIN_COORDS 0x0f
198 typedef struct synapticsinfo {
199 struct sysctl_ctx_list sysctl_ctx;
200 struct sysctl_oid *sysctl_tree;
201 int directional_scrolls;
202 int two_finger_scroll;
219 int weight_previous_na;
220 int weight_len_squared;
228 int vscroll_ver_area;
229 int vscroll_hor_area;
230 int vscroll_min_delta;
239 int three_finger_drag;
243 typedef struct synapticspacket {
248 #define SYNAPTICS_PACKETQUEUE 10
249 #define SYNAPTICS_QUEUE_CURSOR(x) \
250 (x + SYNAPTICS_PACKETQUEUE) % SYNAPTICS_PACKETQUEUE
252 #define SYNAPTICS_VERSION_GE(synhw, major, minor) \
253 ((synhw).infoMajor > (major) || \
254 ((synhw).infoMajor == (major) && (synhw).infoMinor >= (minor)))
256 typedef struct smoother {
257 synapticspacket_t queue[SYNAPTICS_PACKETQUEUE];
270 typedef struct gesture {
276 int zmax; /* maximum pressure value */
277 struct timeval taptimeout; /* tap timeout for touchpads */
281 TRACKPOINT_SYSCTL_SENSITIVITY,
282 TRACKPOINT_SYSCTL_NEGATIVE_INERTIA,
283 TRACKPOINT_SYSCTL_UPPER_PLATEAU,
284 TRACKPOINT_SYSCTL_BACKUP_RANGE,
285 TRACKPOINT_SYSCTL_DRAG_HYSTERESIS,
286 TRACKPOINT_SYSCTL_MINIMUM_DRAG,
287 TRACKPOINT_SYSCTL_UP_THRESHOLD,
288 TRACKPOINT_SYSCTL_THRESHOLD,
289 TRACKPOINT_SYSCTL_JENKS_CURVATURE,
290 TRACKPOINT_SYSCTL_Z_TIME,
291 TRACKPOINT_SYSCTL_PRESS_TO_SELECT,
292 TRACKPOINT_SYSCTL_SKIP_BACKUPS
295 typedef struct trackpointinfo {
296 struct sysctl_ctx_list sysctl_ctx;
297 struct sysctl_oid *sysctl_tree;
312 typedef struct finger {
319 #define PSM_FINGERS 2 /* # of processed fingers */
320 #define PSM_FINGER_IS_PEN (1<<0)
321 #define PSM_FINGER_FUZZY (1<<1)
322 #define PSM_FINGER_DEFAULT_P tap_threshold
323 #define PSM_FINGER_DEFAULT_W 1
324 #define PSM_FINGER_IS_SET(f) ((f).x != -1 && (f).y != -1 && (f).p != 0)
325 #define PSM_FINGER_RESET(f) do { \
326 (f) = (finger_t) { .x = -1, .y = -1, .p = 0, .w = 0, .flags = 0 }; \
329 typedef struct elantechhw {
347 /* minimum versions supported by this driver */
348 #define ELANTECH_HW_IS_V1(fwver) ((fwver) < 0x020030 || (fwver) == 0x020600)
350 #define ELANTECH_MAGIC(magic) \
351 ((magic)[0] == 0x3c && (magic)[1] == 0x03 && \
352 ((magic)[2] == 0xc8 || (magic)[2] == 0x00))
354 #define ELANTECH_FW_ID 0x00
355 #define ELANTECH_FW_VERSION 0x01
356 #define ELANTECH_CAPABILITIES 0x02
357 #define ELANTECH_SAMPLE 0x03
358 #define ELANTECH_RESOLUTION 0x04
359 #define ELANTECH_REG_READ 0x10
360 #define ELANTECH_REG_WRITE 0x11
361 #define ELANTECH_REG_RDWR 0x00
362 #define ELANTECH_CUSTOM_CMD 0xf8
365 #define ELANTECH_MAX_FINGERS 5
367 #define ELANTECH_MAX_FINGERS PSM_FINGERS
370 #define ELANTECH_FINGER_MAX_P 255
371 #define ELANTECH_FINGER_MAX_W 15
372 #define ELANTECH_FINGER_SET_XYP(pb) (finger_t) { \
373 .x = (((pb)->ipacket[1] & 0x0f) << 8) | (pb)->ipacket[2], \
374 .y = (((pb)->ipacket[4] & 0x0f) << 8) | (pb)->ipacket[5], \
375 .p = ((pb)->ipacket[1] & 0xf0) | (((pb)->ipacket[4] >> 4) & 0x0f), \
376 .w = PSM_FINGER_DEFAULT_W, \
382 ELANTECH_PKT_TRACKPOINT,
383 ELANTECH_PKT_V2_COMMON,
384 ELANTECH_PKT_V2_2FINGER,
386 ELANTECH_PKT_V4_STATUS,
387 ELANTECH_PKT_V4_HEAD,
388 ELANTECH_PKT_V4_MOTION
391 #define ELANTECH_PKT_IS_TRACKPOINT(pb) (((pb)->ipacket[3] & 0x0f) == 0x06)
392 #define ELANTECH_PKT_IS_DEBOUNCE(pb, hwversion) ((hwversion) == 4 ? 0 : \
393 (pb)->ipacket[0] == ((hwversion) == 2 ? 0x84 : 0xc4) && \
394 (pb)->ipacket[1] == 0xff && (pb)->ipacket[2] == 0xff && \
395 (pb)->ipacket[3] == 0x02 && (pb)->ipacket[4] == 0xff && \
396 (pb)->ipacket[5] == 0xff)
397 #define ELANTECH_PKT_IS_V2(pb) \
398 (((pb)->ipacket[0] & 0x0c) == 0x04 && ((pb)->ipacket[3] & 0x0f) == 0x02)
399 #define ELANTECH_PKT_IS_V3_HEAD(pb, hascrc) ((hascrc) ? \
400 ((pb)->ipacket[3] & 0x09) == 0x08 : \
401 ((pb)->ipacket[0] & 0x0c) == 0x04 && ((pb)->ipacket[3] & 0xcf) == 0x02)
402 #define ELANTECH_PKT_IS_V3_TAIL(pb, hascrc) ((hascrc) ? \
403 ((pb)->ipacket[3] & 0x09) == 0x09 : \
404 ((pb)->ipacket[0] & 0x0c) == 0x0c && ((pb)->ipacket[3] & 0xce) == 0x0c)
405 #define ELANTECH_PKT_IS_V4(pb, hascrc) ((hascrc) ? \
406 ((pb)->ipacket[3] & 0x08) == 0x00 : \
407 ((pb)->ipacket[0] & 0x0c) == 0x04 && ((pb)->ipacket[3] & 0x1c) == 0x10)
409 typedef struct elantechaction {
410 finger_t fingers[ELANTECH_MAX_FINGERS];
415 /* driver control block */
416 struct psm_softc { /* Driver status information */
418 struct selinfo rsel; /* Process selecting for Input */
419 u_char state; /* Mouse driver state */
420 int config; /* driver configuration flags */
421 int flags; /* other flags */
422 KBDC kbdc; /* handle to access kbd controller */
423 struct resource *intr; /* IRQ resource */
424 void *ih; /* interrupt handle */
425 mousehw_t hw; /* hardware information */
426 synapticshw_t synhw; /* Synaptics hardware information */
427 synapticsinfo_t syninfo; /* Synaptics configuration */
428 smoother_t smoother[PSM_FINGERS]; /* Motion smoothing */
429 gesture_t gesture; /* Gesture context */
430 elantechhw_t elanhw; /* Elantech hardware information */
431 elantechaction_t elanaction; /* Elantech action context */
432 int tphw; /* TrackPoint hardware information */
433 trackpointinfo_t tpinfo; /* TrackPoint configuration */
434 mousemode_t mode; /* operation mode */
435 mousemode_t dflt_mode; /* default operation mode */
436 mousestatus_t status; /* accumulated mouse movement */
437 ringbuf_t queue; /* mouse status queue */
438 packetbuf_t pqueue[PSM_PACKETQUEUE]; /* mouse data queue */
439 int pqueue_start; /* start of data in queue */
440 int pqueue_end; /* end of data in queue */
441 int button; /* the latest button state */
442 int xold; /* previous absolute X position */
443 int yold; /* previous absolute Y position */
444 int xaverage; /* average X position */
445 int yaverage; /* average Y position */
446 int squelch; /* level to filter movement at low speed */
447 int syncerrors; /* # of bytes discarded to synchronize */
448 int pkterrors; /* # of packets failed during quaranteen. */
449 int fpcount; /* forcePad valid packet counter */
450 struct timeval inputtimeout;
451 struct timeval lastsoftintr; /* time of last soft interrupt */
452 struct timeval lastinputerr; /* time last sync error happened */
453 struct timeval idletimeout;
454 packetbuf_t idlepacket; /* packet to send after idle timeout */
455 int watchdog; /* watchdog timer flag */
456 struct callout callout; /* watchdog timer call out */
457 struct callout softcallout; /* buffer timer call out */
462 struct sigio *async; /* Processes waiting for SIGIO */
463 int extended_buttons;
464 int muxport; /* MUX port with attached Synaptics */
465 u_char muxsave[3]; /* 3->6 byte proto conversion buffer */
466 int muxtpbuttons; /* Touchpad button state */
467 int muxmsbuttons; /* Mouse (trackpoint) button state */
468 struct timeval muxmidtimeout; /* middle button supression timeout */
470 struct evdev_dev *evdev_a; /* Absolute reporting device */
471 struct evdev_dev *evdev_r; /* Relative reporting device */
474 static devclass_t psm_devclass;
476 /* driver state flags (state) */
477 #define PSM_VALID 0x80
478 #define PSM_OPEN 1 /* Device is open */
479 #define PSM_ASLP 2 /* Waiting for mouse data */
480 #define PSM_SOFTARMED 4 /* Software interrupt armed */
481 #define PSM_NEED_SYNCBITS 8 /* Set syncbits using next data pkt */
482 #define PSM_EV_OPEN_R 0x10 /* Relative evdev device is open */
483 #define PSM_EV_OPEN_A 0x20 /* Absolute evdev device is open */
485 /* driver configuration flags (config) */
486 #define PSM_CONFIG_RESOLUTION 0x000f /* resolution */
487 #define PSM_CONFIG_ACCEL 0x00f0 /* acceleration factor */
488 #define PSM_CONFIG_NOCHECKSYNC 0x0100 /* disable sync. test */
489 #define PSM_CONFIG_NOIDPROBE 0x0200 /* disable mouse model probe */
490 #define PSM_CONFIG_NORESET 0x0400 /* don't reset the mouse */
491 #define PSM_CONFIG_FORCETAP 0x0800 /* assume `tap' action exists */
492 #define PSM_CONFIG_IGNPORTERROR 0x1000 /* ignore error in aux port test */
493 #define PSM_CONFIG_HOOKRESUME 0x2000 /* hook the system resume event */
494 #define PSM_CONFIG_INITAFTERSUSPEND 0x4000 /* init the device at the resume event */
496 #define PSM_CONFIG_FLAGS \
497 (PSM_CONFIG_RESOLUTION | \
499 PSM_CONFIG_NOCHECKSYNC | \
500 PSM_CONFIG_NOIDPROBE | \
501 PSM_CONFIG_NORESET | \
502 PSM_CONFIG_FORCETAP | \
503 PSM_CONFIG_IGNPORTERROR | \
504 PSM_CONFIG_HOOKRESUME | \
505 PSM_CONFIG_INITAFTERSUSPEND)
507 /* other flags (flags) */
508 #define PSM_FLAGS_FINGERDOWN 0x0001 /* VersaPad finger down */
510 #define kbdcp(p) ((atkbdc_softc_t *)(p))
511 #define ALWAYS_RESTORE_CONTROLLER(kbdc) !(kbdcp(kbdc)->quirks \
512 & KBDC_QUIRK_KEEP_ACTIVATED)
515 static int tap_enabled = -1;
516 static int verbose = PSM_DEBUG;
517 static int synaptics_support = 1;
518 static int trackpoint_support = 1;
519 static int elantech_support = 1;
521 /* for backward compatibility */
522 #define OLD_MOUSE_GETHWINFO _IOR('M', 1, old_mousehw_t)
523 #define OLD_MOUSE_GETMODE _IOR('M', 2, old_mousemode_t)
524 #define OLD_MOUSE_SETMODE _IOW('M', 3, old_mousemode_t)
526 typedef struct old_mousehw {
533 typedef struct old_mousemode {
540 #define SYN_OFFSET(field) offsetof(struct psm_softc, syninfo.field)
542 SYNAPTICS_SYSCTL_MIN_PRESSURE = SYN_OFFSET(min_pressure),
543 SYNAPTICS_SYSCTL_MAX_PRESSURE = SYN_OFFSET(max_pressure),
544 SYNAPTICS_SYSCTL_MAX_WIDTH = SYN_OFFSET(max_width),
545 SYNAPTICS_SYSCTL_MARGIN_TOP = SYN_OFFSET(margin_top),
546 SYNAPTICS_SYSCTL_MARGIN_RIGHT = SYN_OFFSET(margin_right),
547 SYNAPTICS_SYSCTL_MARGIN_BOTTOM = SYN_OFFSET(margin_bottom),
548 SYNAPTICS_SYSCTL_MARGIN_LEFT = SYN_OFFSET(margin_left),
549 SYNAPTICS_SYSCTL_NA_TOP = SYN_OFFSET(na_top),
550 SYNAPTICS_SYSCTL_NA_RIGHT = SYN_OFFSET(na_right),
551 SYNAPTICS_SYSCTL_NA_BOTTOM = SYN_OFFSET(na_bottom),
552 SYNAPTICS_SYSCTL_NA_LEFT = SYN_OFFSET(na_left),
553 SYNAPTICS_SYSCTL_WINDOW_MIN = SYN_OFFSET(window_min),
554 SYNAPTICS_SYSCTL_WINDOW_MAX = SYN_OFFSET(window_max),
555 SYNAPTICS_SYSCTL_MULTIPLICATOR = SYN_OFFSET(multiplicator),
556 SYNAPTICS_SYSCTL_WEIGHT_CURRENT = SYN_OFFSET(weight_current),
557 SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS = SYN_OFFSET(weight_previous),
558 SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS_NA = SYN_OFFSET(weight_previous_na),
559 SYNAPTICS_SYSCTL_WEIGHT_LEN_SQUARED = SYN_OFFSET(weight_len_squared),
560 SYNAPTICS_SYSCTL_DIV_MIN = SYN_OFFSET(div_min),
561 SYNAPTICS_SYSCTL_DIV_MAX = SYN_OFFSET(div_max),
562 SYNAPTICS_SYSCTL_DIV_MAX_NA = SYN_OFFSET(div_max_na),
563 SYNAPTICS_SYSCTL_DIV_LEN = SYN_OFFSET(div_len),
564 SYNAPTICS_SYSCTL_TAP_MAX_DELTA = SYN_OFFSET(tap_max_delta),
565 SYNAPTICS_SYSCTL_TAP_MIN_QUEUE = SYN_OFFSET(tap_min_queue),
566 SYNAPTICS_SYSCTL_TAPHOLD_TIMEOUT = SYN_OFFSET(taphold_timeout),
567 SYNAPTICS_SYSCTL_VSCROLL_HOR_AREA = SYN_OFFSET(vscroll_hor_area),
568 SYNAPTICS_SYSCTL_VSCROLL_VER_AREA = SYN_OFFSET(vscroll_ver_area),
569 SYNAPTICS_SYSCTL_VSCROLL_MIN_DELTA = SYN_OFFSET(vscroll_min_delta),
570 SYNAPTICS_SYSCTL_VSCROLL_DIV_MIN = SYN_OFFSET(vscroll_div_min),
571 SYNAPTICS_SYSCTL_VSCROLL_DIV_MAX = SYN_OFFSET(vscroll_div_max),
572 SYNAPTICS_SYSCTL_TOUCHPAD_OFF = SYN_OFFSET(touchpad_off),
573 SYNAPTICS_SYSCTL_SOFTBUTTONS_Y = SYN_OFFSET(softbuttons_y),
574 SYNAPTICS_SYSCTL_SOFTBUTTON2_X = SYN_OFFSET(softbutton2_x),
575 SYNAPTICS_SYSCTL_SOFTBUTTON3_X = SYN_OFFSET(softbutton3_x),
576 SYNAPTICS_SYSCTL_THREE_FINGER_DRAG = SYN_OFFSET(three_finger_drag),
577 SYNAPTICS_SYSCTL_NATURAL_SCROLL = SYN_OFFSET(natural_scroll),
578 #define SYNAPTICS_SYSCTL_LAST SYNAPTICS_SYSCTL_NATURAL_SCROLL
581 /* packet formatting function */
582 typedef int packetfunc_t(struct psm_softc *, u_char *, int *, int,
585 /* function prototypes */
586 static void psmidentify(driver_t *, device_t);
587 static int psmprobe(device_t);
588 static int psmattach(device_t);
589 static int psmdetach(device_t);
590 static int psmresume(device_t);
592 static d_open_t psm_cdev_open;
593 static d_close_t psm_cdev_close;
594 static d_read_t psmread;
595 static d_write_t psmwrite;
596 static d_ioctl_t psmioctl;
597 static d_poll_t psmpoll;
599 static int psmopen(struct psm_softc *);
600 static int psmclose(struct psm_softc *);
603 static evdev_open_t psm_ev_open_r;
604 static evdev_close_t psm_ev_close_r;
605 static evdev_open_t psm_ev_open_a;
606 static evdev_close_t psm_ev_close_a;
609 static int enable_aux_dev(KBDC);
610 static int disable_aux_dev(KBDC);
611 static int get_mouse_status(KBDC, int *, int, int);
612 static int get_aux_id(KBDC);
613 static int set_mouse_sampling_rate(KBDC, int);
614 static int set_mouse_scaling(KBDC, int);
615 static int set_mouse_resolution(KBDC, int);
616 static int set_mouse_mode(KBDC);
617 static int get_mouse_buttons(KBDC);
618 static int is_a_mouse(int);
619 static void recover_from_error(KBDC);
620 static int restore_controller(KBDC, int);
621 static int doinitialize(struct psm_softc *, mousemode_t *);
622 static int doopen(struct psm_softc *, int);
623 static int reinitialize(struct psm_softc *, int);
624 static char *model_name(int);
625 static void psmsoftintr(void *);
626 static void psmsoftintridle(void *);
627 static void psmintr(void *);
628 static void psmtimeout(void *);
629 static int timeelapsed(const struct timeval *, int, int,
630 const struct timeval *);
631 static void dropqueue(struct psm_softc *);
632 static void flushpackets(struct psm_softc *);
633 static void proc_mmanplus(struct psm_softc *, packetbuf_t *,
634 mousestatus_t *, int *, int *, int *);
635 static int proc_synaptics(struct psm_softc *, packetbuf_t *,
636 mousestatus_t *, int *, int *, int *);
637 static int proc_synaptics_mux(struct psm_softc *, packetbuf_t *);
638 static void proc_versapad(struct psm_softc *, packetbuf_t *,
639 mousestatus_t *, int *, int *, int *);
640 static int proc_elantech(struct psm_softc *, packetbuf_t *,
641 mousestatus_t *, int *, int *, int *);
642 static int psmpalmdetect(struct psm_softc *, finger_t *, int);
643 static void psmgestures(struct psm_softc *, finger_t *, int,
645 static void psmsmoother(struct psm_softc *, finger_t *, int,
646 mousestatus_t *, int *, int *);
647 static int tame_mouse(struct psm_softc *, packetbuf_t *, mousestatus_t *,
650 /* vendor specific features */
651 enum probearg { PROBE, REINIT };
652 typedef int probefunc_t(struct psm_softc *, enum probearg);
654 static int mouse_id_proc1(KBDC, int, int, int *);
655 static int mouse_ext_command(KBDC, int);
657 static probefunc_t enable_groller;
658 static probefunc_t enable_gmouse;
659 static probefunc_t enable_aglide;
660 static probefunc_t enable_kmouse;
661 static probefunc_t enable_msexplorer;
662 static probefunc_t enable_msintelli;
663 static probefunc_t enable_4dmouse;
664 static probefunc_t enable_4dplus;
665 static probefunc_t enable_mmanplus;
666 static probefunc_t enable_synaptics;
667 static probefunc_t enable_synaptics_mux;
668 static probefunc_t enable_trackpoint;
669 static probefunc_t enable_versapad;
670 static probefunc_t enable_elantech;
672 static void set_trackpoint_parameters(struct psm_softc *sc);
673 static void synaptics_passthrough_on(struct psm_softc *sc);
674 static void synaptics_passthrough_off(struct psm_softc *sc);
675 static int synaptics_preferred_mode(struct psm_softc *sc);
676 static void synaptics_set_mode(struct psm_softc *sc, int mode_byte);
682 probefunc_t *probefunc;
685 * WARNING: the order of probe is very important. Don't mess it
686 * unless you know what you are doing.
688 { MOUSE_MODEL_SYNAPTICS, /* Synaptics Touchpad on Active Mux */
689 0x00, MOUSE_PS2_PACKETSIZE, enable_synaptics_mux },
690 { MOUSE_MODEL_NET, /* Genius NetMouse */
691 0x08, MOUSE_PS2INTELLI_PACKETSIZE, enable_gmouse },
692 { MOUSE_MODEL_NETSCROLL, /* Genius NetScroll */
693 0xc8, 6, enable_groller },
694 { MOUSE_MODEL_MOUSEMANPLUS, /* Logitech MouseMan+ */
695 0x08, MOUSE_PS2_PACKETSIZE, enable_mmanplus },
696 { MOUSE_MODEL_EXPLORER, /* Microsoft IntelliMouse Explorer */
697 0x08, MOUSE_PS2INTELLI_PACKETSIZE, enable_msexplorer },
698 { MOUSE_MODEL_4D, /* A4 Tech 4D Mouse */
699 0x08, MOUSE_4D_PACKETSIZE, enable_4dmouse },
700 { MOUSE_MODEL_4DPLUS, /* A4 Tech 4D+ Mouse */
701 0xc8, MOUSE_4DPLUS_PACKETSIZE, enable_4dplus },
702 { MOUSE_MODEL_SYNAPTICS, /* Synaptics Touchpad */
703 0xc0, MOUSE_SYNAPTICS_PACKETSIZE, enable_synaptics },
704 { MOUSE_MODEL_ELANTECH, /* Elantech Touchpad */
705 0x04, MOUSE_ELANTECH_PACKETSIZE, enable_elantech },
706 { MOUSE_MODEL_INTELLI, /* Microsoft IntelliMouse */
707 0x08, MOUSE_PS2INTELLI_PACKETSIZE, enable_msintelli },
708 { MOUSE_MODEL_GLIDEPOINT, /* ALPS GlidePoint */
709 0xc0, MOUSE_PS2_PACKETSIZE, enable_aglide },
710 { MOUSE_MODEL_THINK, /* Kensington ThinkingMouse */
711 0x80, MOUSE_PS2_PACKETSIZE, enable_kmouse },
712 { MOUSE_MODEL_VERSAPAD, /* Interlink electronics VersaPad */
713 0xe8, MOUSE_PS2VERSA_PACKETSIZE, enable_versapad },
714 { MOUSE_MODEL_TRACKPOINT, /* IBM/Lenovo TrackPoint */
715 0xc0, MOUSE_PS2_PACKETSIZE, enable_trackpoint },
716 { MOUSE_MODEL_GENERIC,
717 0xc0, MOUSE_PS2_PACKETSIZE, NULL },
719 #define GENERIC_MOUSE_ENTRY (nitems(vendortype) - 1)
721 /* device driver declarateion */
722 static device_method_t psm_methods[] = {
723 /* Device interface */
724 DEVMETHOD(device_identify, psmidentify),
725 DEVMETHOD(device_probe, psmprobe),
726 DEVMETHOD(device_attach, psmattach),
727 DEVMETHOD(device_detach, psmdetach),
728 DEVMETHOD(device_resume, psmresume),
733 static driver_t psm_driver = {
736 sizeof(struct psm_softc),
739 static struct cdevsw psm_cdevsw = {
740 .d_version = D_VERSION,
741 .d_flags = D_NEEDGIANT,
742 .d_open = psm_cdev_open,
743 .d_close = psm_cdev_close,
748 .d_name = PSM_DRIVER_NAME,
752 static const struct evdev_methods psm_ev_methods_r = {
753 .ev_open = psm_ev_open_r,
754 .ev_close = psm_ev_close_r,
756 static const struct evdev_methods psm_ev_methods_a = {
757 .ev_open = psm_ev_open_a,
758 .ev_close = psm_ev_close_a,
762 /* device I/O routines */
764 enable_aux_dev(KBDC kbdc)
768 res = send_aux_command(kbdc, PSMC_ENABLE_DEV);
769 VLOG(2, (LOG_DEBUG, "psm: ENABLE_DEV return code:%04x\n", res));
771 return (res == PSM_ACK);
775 disable_aux_dev(KBDC kbdc)
779 res = send_aux_command(kbdc, PSMC_DISABLE_DEV);
780 VLOG(2, (LOG_DEBUG, "psm: DISABLE_DEV return code:%04x\n", res));
782 return (res == PSM_ACK);
786 get_mouse_status(KBDC kbdc, int *status, int flag, int len)
795 cmd = PSMC_SEND_DEV_STATUS;
798 cmd = PSMC_SEND_DEV_DATA;
801 empty_aux_buffer(kbdc, 5);
802 res = send_aux_command(kbdc, cmd);
803 VLOG(2, (LOG_DEBUG, "psm: SEND_AUX_DEV_%s return code:%04x\n",
804 (flag == 1) ? "DATA" : "STATUS", res));
808 for (i = 0; i < len; ++i) {
809 status[i] = read_aux_data(kbdc);
816 VLOG(1, (LOG_DEBUG, "psm: %s %02x %02x %02x\n",
817 (flag == 1) ? "data" : "status", status[0], status[1], status[2]));
824 get_aux_id(KBDC kbdc)
829 empty_aux_buffer(kbdc, 5);
830 res = send_aux_command(kbdc, PSMC_SEND_DEV_ID);
831 VLOG(2, (LOG_DEBUG, "psm: SEND_DEV_ID return code:%04x\n", res));
838 id = read_aux_data(kbdc);
839 VLOG(2, (LOG_DEBUG, "psm: device ID: %04x\n", id));
845 set_mouse_sampling_rate(KBDC kbdc, int rate)
849 res = send_aux_command_and_data(kbdc, PSMC_SET_SAMPLING_RATE, rate);
850 VLOG(2, (LOG_DEBUG, "psm: SET_SAMPLING_RATE (%d) %04x\n", rate, res));
852 return ((res == PSM_ACK) ? rate : -1);
856 set_mouse_scaling(KBDC kbdc, int scale)
863 scale = PSMC_SET_SCALING11;
866 scale = PSMC_SET_SCALING21;
869 res = send_aux_command(kbdc, scale);
870 VLOG(2, (LOG_DEBUG, "psm: SET_SCALING%s return code:%04x\n",
871 (scale == PSMC_SET_SCALING21) ? "21" : "11", res));
873 return (res == PSM_ACK);
876 /* `val' must be 0 through PSMD_MAX_RESOLUTION */
878 set_mouse_resolution(KBDC kbdc, int val)
882 res = send_aux_command_and_data(kbdc, PSMC_SET_RESOLUTION, val);
883 VLOG(2, (LOG_DEBUG, "psm: SET_RESOLUTION (%d) %04x\n", val, res));
885 return ((res == PSM_ACK) ? val : -1);
889 * NOTE: once `set_mouse_mode()' is called, the mouse device must be
890 * re-enabled by calling `enable_aux_dev()'
893 set_mouse_mode(KBDC kbdc)
897 res = send_aux_command(kbdc, PSMC_SET_STREAM_MODE);
898 VLOG(2, (LOG_DEBUG, "psm: SET_STREAM_MODE return code:%04x\n", res));
900 return (res == PSM_ACK);
904 get_mouse_buttons(KBDC kbdc)
906 int c = 2; /* assume two buttons by default */
910 * NOTE: a special sequence to obtain Logitech Mouse specific
911 * information: set resolution to 25 ppi, set scaling to 1:1, set
912 * scaling to 1:1, set scaling to 1:1. Then the second byte of the
913 * mouse status bytes is the number of available buttons.
914 * Some manufactures also support this sequence.
916 if (set_mouse_resolution(kbdc, PSMD_RES_LOW) != PSMD_RES_LOW)
918 if (set_mouse_scaling(kbdc, 1) && set_mouse_scaling(kbdc, 1) &&
919 set_mouse_scaling(kbdc, 1) &&
920 get_mouse_status(kbdc, status, 0, 3) >= 3 && status[1] != 0)
925 /* misc subroutines */
927 * Someday, I will get the complete list of valid pointing devices and
934 static int valid_ids[] = {
935 PSM_MOUSE_ID, /* mouse */
936 PSM_BALLPOINT_ID, /* ballpoint device */
937 PSM_INTELLI_ID, /* Intellimouse */
938 PSM_EXPLORER_ID, /* Intellimouse Explorer */
939 -1 /* end of table */
943 for (i = 0; valid_ids[i] >= 0; ++i)
944 if (valid_ids[i] == id)
953 model_name(int model)
959 { MOUSE_MODEL_NETSCROLL, "NetScroll" },
960 { MOUSE_MODEL_NET, "NetMouse/NetScroll Optical" },
961 { MOUSE_MODEL_GLIDEPOINT, "GlidePoint" },
962 { MOUSE_MODEL_THINK, "ThinkingMouse" },
963 { MOUSE_MODEL_INTELLI, "IntelliMouse" },
964 { MOUSE_MODEL_MOUSEMANPLUS, "MouseMan+" },
965 { MOUSE_MODEL_VERSAPAD, "VersaPad" },
966 { MOUSE_MODEL_EXPLORER, "IntelliMouse Explorer" },
967 { MOUSE_MODEL_4D, "4D Mouse" },
968 { MOUSE_MODEL_4DPLUS, "4D+ Mouse" },
969 { MOUSE_MODEL_SYNAPTICS, "Synaptics Touchpad" },
970 { MOUSE_MODEL_TRACKPOINT, "IBM/Lenovo TrackPoint" },
971 { MOUSE_MODEL_ELANTECH, "Elantech Touchpad" },
972 { MOUSE_MODEL_GENERIC, "Generic PS/2 mouse" },
973 { MOUSE_MODEL_UNKNOWN, "Unknown" },
977 for (i = 0; models[i].model_code != MOUSE_MODEL_UNKNOWN; ++i)
978 if (models[i].model_code == model)
980 return (models[i].model_name);
984 recover_from_error(KBDC kbdc)
986 /* discard anything left in the output buffer */
987 empty_both_buffers(kbdc, 10);
991 * NOTE: KBDC_RESET_KBD may not restore the communication between the
992 * keyboard and the controller.
997 * NOTE: somehow diagnostic and keyboard port test commands bring the
1000 if (!test_controller(kbdc))
1001 log(LOG_ERR, "psm: keyboard controller failed.\n");
1002 /* if there isn't a keyboard in the system, the following error is OK */
1003 if (test_kbd_port(kbdc) != 0)
1004 VLOG(1, (LOG_ERR, "psm: keyboard port failed.\n"));
1009 restore_controller(KBDC kbdc, int command_byte)
1011 empty_both_buffers(kbdc, 10);
1013 if (!set_controller_command_byte(kbdc, 0xff, command_byte)) {
1014 log(LOG_ERR, "psm: failed to restore the keyboard controller "
1016 empty_both_buffers(kbdc, 10);
1019 empty_both_buffers(kbdc, 10);
1025 * Re-initialize the aux port and device. The aux port must be enabled
1026 * and its interrupt must be disabled before calling this routine.
1027 * The aux device will be disabled before returning.
1028 * The keyboard controller must be locked via `kbdc_lock()' before
1029 * calling this routine.
1032 doinitialize(struct psm_softc *sc, mousemode_t *mode)
1034 KBDC kbdc = sc->kbdc;
1038 switch((i = test_aux_port(kbdc))) {
1039 case 1: /* ignore these errors */
1045 "psm%d: strange result for test aux port (%d).\n",
1048 case 0: /* no error */
1050 case -1: /* time out */
1051 default: /* error */
1052 recover_from_error(kbdc);
1053 if (sc->config & PSM_CONFIG_IGNPORTERROR)
1055 log(LOG_ERR, "psm%d: the aux port is not functioning (%d).\n",
1060 if (sc->config & PSM_CONFIG_NORESET) {
1062 * Don't try to reset the pointing device. It may possibly
1063 * be left in the unknown state, though...
1067 * NOTE: some controllers appears to hang the `keyboard' when
1068 * the aux port doesn't exist and `PSMC_RESET_DEV' is issued.
1070 if (!reset_aux_dev(kbdc)) {
1071 recover_from_error(kbdc);
1072 log(LOG_ERR, "psm%d: failed to reset the aux device.\n",
1079 * both the aux port and the aux device is functioning, see
1080 * if the device can be enabled.
1082 if (!enable_aux_dev(kbdc) || !disable_aux_dev(kbdc)) {
1083 log(LOG_ERR, "psm%d: failed to enable the aux device.\n",
1087 empty_both_buffers(kbdc, 10); /* remove stray data if any */
1089 /* Re-enable the mouse. */
1090 for (i = 0; vendortype[i].probefunc != NULL; ++i)
1091 if (vendortype[i].model == sc->hw.model)
1092 (*vendortype[i].probefunc)(sc, REINIT);
1094 /* set mouse parameters */
1095 if (mode != (mousemode_t *)NULL) {
1097 mode->rate = set_mouse_sampling_rate(kbdc, mode->rate);
1098 if (mode->resolution >= 0)
1100 set_mouse_resolution(kbdc, mode->resolution);
1101 set_mouse_scaling(kbdc, 1);
1102 set_mouse_mode(kbdc);
1105 /* Record sync on the next data packet we see. */
1106 sc->flags |= PSM_NEED_SYNCBITS;
1108 /* just check the status of the mouse */
1109 if (get_mouse_status(kbdc, stat, 0, 3) < 3)
1110 log(LOG_DEBUG, "psm%d: failed to get status (doinitialize).\n",
1117 doopen(struct psm_softc *sc, int command_byte)
1120 int mux_enabled = FALSE;
1123 * FIXME: Synaptics TouchPad seems to go back to Relative Mode with
1124 * no obvious reason. Thus we check the current mode and restore the
1125 * Absolute Mode if it was cleared.
1127 * The previous hack at the end of psmprobe() wasn't efficient when
1128 * moused(8) was restarted.
1130 * A Reset (FF) or Set Defaults (F6) command would clear the
1131 * Absolute Mode bit. But a verbose boot or debug.psm.loglevel=5
1132 * doesn't show any evidence of such a command.
1134 if (sc->hw.model == MOUSE_MODEL_SYNAPTICS) {
1135 if (sc->muxport != PSM_NOMUX) {
1136 mux_enabled = enable_aux_mux(sc->kbdc) >= 0;
1138 set_active_aux_mux_port(sc->kbdc, sc->muxport);
1140 log(LOG_ERR, "psm%d: failed to enable "
1141 "active multiplexing mode.\n",
1144 mouse_ext_command(sc->kbdc, SYNAPTICS_READ_MODES);
1145 get_mouse_status(sc->kbdc, stat, 0, 3);
1146 if ((SYNAPTICS_VERSION_GE(sc->synhw, 7, 5) ||
1149 synaptics_set_mode(sc, synaptics_preferred_mode(sc));
1150 VLOG(5, (LOG_DEBUG, "psm%d: Synaptis Absolute Mode "
1151 "hopefully restored\n",
1155 disable_aux_mux(sc->kbdc);
1159 * A user may want to disable tap and drag gestures on a Synaptics
1160 * TouchPad when it operates in Relative Mode.
1162 if (sc->hw.model == MOUSE_MODEL_GENERIC) {
1163 if (tap_enabled > 0) {
1165 "psm%d: enable tap and drag gestures\n",
1167 synaptics_set_mode(sc, synaptics_preferred_mode(sc));
1168 } else if (tap_enabled == 0) {
1170 "psm%d: disable tap and drag gestures\n",
1172 synaptics_set_mode(sc, synaptics_preferred_mode(sc));
1176 /* enable the mouse device */
1177 if (!enable_aux_dev(sc->kbdc)) {
1178 /* MOUSE ERROR: failed to enable the mouse because:
1179 * 1) the mouse is faulty,
1180 * 2) the mouse has been removed(!?)
1181 * In the latter case, the keyboard may have hung, and need
1182 * recovery procedure...
1184 recover_from_error(sc->kbdc);
1186 /* FIXME: we could reset the mouse here and try to enable
1187 * it again. But it will take long time and it's not a good
1188 * idea to disable the keyboard that long...
1190 if (!doinitialize(sc, &sc->mode) || !enable_aux_dev(sc->kbdc)) {
1191 recover_from_error(sc->kbdc);
1195 restore_controller(sc->kbdc, command_byte);
1196 /* mark this device is no longer available */
1197 sc->state &= ~PSM_VALID;
1199 "psm%d: failed to enable the device (doopen).\n",
1205 if (get_mouse_status(sc->kbdc, stat, 0, 3) < 3)
1206 log(LOG_DEBUG, "psm%d: failed to get status (doopen).\n",
1209 /* enable the aux port and interrupt */
1210 if (!set_controller_command_byte(sc->kbdc,
1211 kbdc_get_device_mask(sc->kbdc),
1212 (command_byte & KBD_KBD_CONTROL_BITS) |
1213 KBD_ENABLE_AUX_PORT | KBD_ENABLE_AUX_INT)) {
1214 /* CONTROLLER ERROR */
1215 disable_aux_dev(sc->kbdc);
1216 restore_controller(sc->kbdc, command_byte);
1218 "psm%d: failed to enable the aux interrupt (doopen).\n",
1223 /* start the watchdog timer */
1224 sc->watchdog = FALSE;
1225 callout_reset(&sc->callout, hz * 2, psmtimeout, sc);
1231 reinitialize(struct psm_softc *sc, int doinit)
1237 /* don't let anybody mess with the aux device */
1238 if (!kbdc_lock(sc->kbdc, TRUE))
1242 /* block our watchdog timer */
1243 sc->watchdog = FALSE;
1244 callout_stop(&sc->callout);
1246 /* save the current controller command byte */
1247 empty_both_buffers(sc->kbdc, 10);
1248 c = get_controller_command_byte(sc->kbdc);
1250 "psm%d: current command byte: %04x (reinitialize).\n",
1253 /* enable the aux port but disable the aux interrupt and the keyboard */
1254 if ((c == -1) || !set_controller_command_byte(sc->kbdc,
1255 kbdc_get_device_mask(sc->kbdc),
1256 KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT |
1257 KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
1258 /* CONTROLLER ERROR */
1260 kbdc_lock(sc->kbdc, FALSE);
1262 "psm%d: unable to set the command byte (reinitialize).\n",
1267 /* flush any data */
1268 if (sc->state & PSM_VALID) {
1269 /* this may fail; but never mind... */
1270 disable_aux_dev(sc->kbdc);
1271 empty_aux_buffer(sc->kbdc, 10);
1276 memset(&sc->lastinputerr, 0, sizeof(sc->lastinputerr));
1278 /* try to detect the aux device; are you still there? */
1281 if (doinitialize(sc, &sc->mode)) {
1283 sc->state |= PSM_VALID;
1285 /* the device has gone! */
1286 restore_controller(sc->kbdc, c);
1287 sc->state &= ~PSM_VALID;
1289 "psm%d: the aux device has gone! (reinitialize).\n",
1296 /* restore the driver state */
1297 if ((sc->state & (PSM_OPEN | PSM_EV_OPEN_R | PSM_EV_OPEN_A)) &&
1299 /* enable the aux device and the port again */
1300 err = doopen(sc, c);
1302 log(LOG_ERR, "psm%d: failed to enable the device "
1303 "(reinitialize).\n", sc->unit);
1305 /* restore the keyboard port and disable the aux port */
1306 if (!set_controller_command_byte(sc->kbdc,
1307 kbdc_get_device_mask(sc->kbdc),
1308 (c & KBD_KBD_CONTROL_BITS) |
1309 KBD_DISABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
1310 /* CONTROLLER ERROR */
1311 log(LOG_ERR, "psm%d: failed to disable the aux port "
1312 "(reinitialize).\n", sc->unit);
1317 kbdc_lock(sc->kbdc, FALSE);
1321 /* psm driver entry points */
1324 psmidentify(driver_t *driver, device_t parent)
1331 unit = device_get_unit(parent);
1333 /* always add at least one child */
1334 psm = BUS_ADD_CHILD(parent, KBDC_RID_AUX, driver->name, unit);
1338 irq = bus_get_resource_start(psm, SYS_RES_IRQ, KBDC_RID_AUX);
1343 * If the PS/2 mouse device has already been reported by ACPI or
1344 * PnP BIOS, obtain the IRQ resource from it.
1345 * (See psmcpnp_attach() below.)
1347 psmc = device_find_child(device_get_parent(parent),
1348 PSMCPNP_DRIVER_NAME, unit);
1351 irq = bus_get_resource_start(psmc, SYS_RES_IRQ, 0);
1354 bus_delete_resource(psmc, SYS_RES_IRQ, 0);
1355 bus_set_resource(psm, SYS_RES_IRQ, KBDC_RID_AUX, irq, 1);
1358 #define endprobe(v) do { \
1361 kbdc_set_device_mask(sc->kbdc, mask); \
1362 kbdc_lock(sc->kbdc, FALSE); \
1367 psmprobe(device_t dev)
1369 int unit = device_get_unit(dev);
1370 struct psm_softc *sc = device_get_softc(dev);
1381 /* see if IRQ is available */
1383 sc->intr = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE);
1384 if (sc->intr == NULL) {
1386 device_printf(dev, "unable to allocate IRQ\n");
1389 bus_release_resource(dev, SYS_RES_IRQ, rid, sc->intr);
1392 sc->kbdc = atkbdc_open(device_get_unit(device_get_parent(dev)));
1393 if (sc->kbdc == NULL)
1395 sc->config = device_get_flags(dev) & PSM_CONFIG_FLAGS;
1396 /* XXX: for backward compatibility */
1397 #if defined(PSM_HOOKRESUME) || defined(PSM_HOOKAPM)
1399 #ifdef PSM_RESETAFTERSUSPEND
1400 PSM_CONFIG_INITAFTERSUSPEND;
1402 PSM_CONFIG_HOOKRESUME;
1404 #endif /* PSM_HOOKRESUME | PSM_HOOKAPM */
1406 sc->muxport = PSM_NOMUX;
1410 device_set_desc(dev, "PS/2 Mouse");
1412 if (!kbdc_lock(sc->kbdc, TRUE)) {
1413 printf("psm%d: unable to lock the controller.\n", unit);
1420 * NOTE: two bits in the command byte controls the operation of the
1421 * aux port (mouse port): the aux port disable bit (bit 5) and the aux
1422 * port interrupt (IRQ 12) enable bit (bit 2).
1425 /* discard anything left after the keyboard initialization */
1426 empty_both_buffers(sc->kbdc, 10);
1428 /* save the current command byte; it will be used later */
1429 mask = kbdc_get_device_mask(sc->kbdc) & ~KBD_AUX_CONTROL_BITS;
1430 command_byte = get_controller_command_byte(sc->kbdc);
1432 printf("psm%d: current command byte:%04x\n", unit,
1434 if (command_byte == -1) {
1435 /* CONTROLLER ERROR */
1436 printf("psm%d: unable to get the current command byte value.\n",
1442 * disable the keyboard port while probing the aux port, which must be
1443 * enabled during this routine
1445 if (!set_controller_command_byte(sc->kbdc,
1446 KBD_KBD_CONTROL_BITS | KBD_AUX_CONTROL_BITS,
1447 KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT |
1448 KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
1450 * this is CONTROLLER ERROR; I don't know how to recover
1451 * from this error...
1453 if (ALWAYS_RESTORE_CONTROLLER(sc->kbdc))
1454 restore_controller(sc->kbdc, command_byte);
1455 printf("psm%d: unable to set the command byte.\n", unit);
1458 write_controller_command(sc->kbdc, KBDC_ENABLE_AUX_PORT);
1461 * NOTE: `test_aux_port()' is designed to return with zero if the aux
1462 * port exists and is functioning. However, some controllers appears
1463 * to respond with zero even when the aux port doesn't exist. (It may
1464 * be that this is only the case when the controller DOES have the aux
1465 * port but the port is not wired on the motherboard.) The keyboard
1466 * controllers without the port, such as the original AT, are
1467 * supposed to return with an error code or simply time out. In any
1468 * case, we have to continue probing the port even when the controller
1471 * XXX: some controllers erroneously return the error code 1, 2 or 3
1472 * when it has a perfectly functional aux port. We have to ignore
1473 * this error code. Even if the controller HAS error with the aux
1474 * port, it will be detected later...
1475 * XXX: another incompatible controller returns PSM_ACK (0xfa)...
1477 switch ((i = test_aux_port(sc->kbdc))) {
1478 case 1: /* ignore these errors */
1483 printf("psm%d: strange result for test aux port "
1484 "(%d).\n", unit, i);
1486 case 0: /* no error */
1488 case -1: /* time out */
1489 default: /* error */
1490 recover_from_error(sc->kbdc);
1491 if (sc->config & PSM_CONFIG_IGNPORTERROR)
1493 if (ALWAYS_RESTORE_CONTROLLER(sc->kbdc))
1494 restore_controller(sc->kbdc, command_byte);
1496 printf("psm%d: the aux port is not functioning (%d).\n",
1501 if (sc->config & PSM_CONFIG_NORESET) {
1503 * Don't try to reset the pointing device. It may possibly be
1504 * left in an unknown state, though...
1508 * NOTE: some controllers appears to hang the `keyboard' when
1509 * the aux port doesn't exist and `PSMC_RESET_DEV' is issued.
1511 * Attempt to reset the controller twice -- this helps
1512 * pierce through some KVM switches. The second reset
1515 if (!reset_aux_dev(sc->kbdc)) {
1516 recover_from_error(sc->kbdc);
1517 if (ALWAYS_RESTORE_CONTROLLER(sc->kbdc))
1518 restore_controller(sc->kbdc, command_byte);
1520 printf("psm%d: failed to reset the aux "
1523 } else if (!reset_aux_dev(sc->kbdc)) {
1524 recover_from_error(sc->kbdc);
1526 printf("psm%d: failed to reset the aux device "
1532 * both the aux port and the aux device are functioning, see if the
1533 * device can be enabled. NOTE: when enabled, the device will start
1534 * sending data; we shall immediately disable the device once we know
1535 * the device can be enabled.
1537 if (!enable_aux_dev(sc->kbdc) || !disable_aux_dev(sc->kbdc)) {
1539 recover_from_error(sc->kbdc);
1540 if (ALWAYS_RESTORE_CONTROLLER(sc->kbdc))
1541 restore_controller(sc->kbdc, command_byte);
1543 printf("psm%d: failed to enable the aux device.\n",
1548 /* save the default values after reset */
1549 if (get_mouse_status(sc->kbdc, stat, 0, 3) >= 3) {
1550 sc->dflt_mode.rate = sc->mode.rate = stat[2];
1551 sc->dflt_mode.resolution = sc->mode.resolution = stat[1];
1553 sc->dflt_mode.rate = sc->mode.rate = -1;
1554 sc->dflt_mode.resolution = sc->mode.resolution = -1;
1557 /* hardware information */
1558 sc->hw.iftype = MOUSE_IF_PS2;
1560 /* verify the device is a mouse */
1561 sc->hw.hwid = get_aux_id(sc->kbdc);
1562 if (!is_a_mouse(sc->hw.hwid)) {
1563 if (ALWAYS_RESTORE_CONTROLLER(sc->kbdc))
1564 restore_controller(sc->kbdc, command_byte);
1566 printf("psm%d: unknown device type (%d).\n", unit,
1570 switch (sc->hw.hwid) {
1571 case PSM_BALLPOINT_ID:
1572 sc->hw.type = MOUSE_TRACKBALL;
1575 case PSM_INTELLI_ID:
1576 case PSM_EXPLORER_ID:
1577 case PSM_4DMOUSE_ID:
1579 sc->hw.type = MOUSE_MOUSE;
1582 sc->hw.type = MOUSE_UNKNOWN;
1586 if (sc->config & PSM_CONFIG_NOIDPROBE) {
1588 i = GENERIC_MOUSE_ENTRY;
1591 sc->hw.buttons = get_mouse_buttons(sc->kbdc);
1593 /* other parameters */
1594 for (i = 0; vendortype[i].probefunc != NULL; ++i)
1595 if ((*vendortype[i].probefunc)(sc, PROBE)) {
1597 printf("psm%d: found %s\n", unit,
1598 model_name(vendortype[i].model));
1603 sc->hw.model = vendortype[i].model;
1605 sc->dflt_mode.level = PSM_LEVEL_BASE;
1606 sc->dflt_mode.packetsize = MOUSE_PS2_PACKETSIZE;
1607 sc->dflt_mode.accelfactor = (sc->config & PSM_CONFIG_ACCEL) >> 4;
1608 if (sc->config & PSM_CONFIG_NOCHECKSYNC)
1609 sc->dflt_mode.syncmask[0] = 0;
1611 sc->dflt_mode.syncmask[0] = vendortype[i].syncmask;
1612 if (sc->config & PSM_CONFIG_FORCETAP)
1613 sc->dflt_mode.syncmask[0] &= ~MOUSE_PS2_TAP;
1614 sc->dflt_mode.syncmask[1] = 0; /* syncbits */
1615 sc->mode = sc->dflt_mode;
1616 sc->mode.packetsize = vendortype[i].packetsize;
1618 /* set mouse parameters */
1621 * A version of Logitech FirstMouse+ won't report wheel movement,
1622 * if SET_DEFAULTS is sent... Don't use this command.
1623 * This fix was found by Takashi Nishida.
1625 i = send_aux_command(sc->kbdc, PSMC_SET_DEFAULTS);
1627 printf("psm%d: SET_DEFAULTS return code:%04x\n", unit, i);
1629 if (sc->config & PSM_CONFIG_RESOLUTION)
1630 sc->mode.resolution =
1631 set_mouse_resolution(sc->kbdc,
1632 (sc->config & PSM_CONFIG_RESOLUTION) - 1);
1633 else if (sc->mode.resolution >= 0)
1634 sc->mode.resolution =
1635 set_mouse_resolution(sc->kbdc, sc->dflt_mode.resolution);
1636 if (sc->mode.rate > 0)
1638 set_mouse_sampling_rate(sc->kbdc, sc->dflt_mode.rate);
1639 set_mouse_scaling(sc->kbdc, 1);
1641 /* Record sync on the next data packet we see. */
1642 sc->flags |= PSM_NEED_SYNCBITS;
1644 /* just check the status of the mouse */
1646 * NOTE: XXX there are some arcane controller/mouse combinations out
1647 * there, which hung the controller unless there is data transmission
1648 * after ACK from the mouse.
1650 if (get_mouse_status(sc->kbdc, stat, 0, 3) < 3)
1651 printf("psm%d: failed to get status.\n", unit);
1654 * When in its native mode, some mice operate with different
1655 * default parameters than in the PS/2 compatible mode.
1657 sc->dflt_mode.rate = sc->mode.rate = stat[2];
1658 sc->dflt_mode.resolution = sc->mode.resolution = stat[1];
1661 /* disable the aux port for now... */
1662 if (!set_controller_command_byte(sc->kbdc,
1663 KBD_KBD_CONTROL_BITS | KBD_AUX_CONTROL_BITS,
1664 (command_byte & KBD_KBD_CONTROL_BITS) |
1665 KBD_DISABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
1667 * this is CONTROLLER ERROR; I don't know the proper way to
1668 * recover from this error...
1670 if (ALWAYS_RESTORE_CONTROLLER(sc->kbdc))
1671 restore_controller(sc->kbdc, command_byte);
1672 printf("psm%d: unable to set the command byte.\n", unit);
1677 kbdc_set_device_mask(sc->kbdc, mask | KBD_AUX_CONTROL_BITS);
1678 kbdc_lock(sc->kbdc, FALSE);
1682 #ifdef EVDEV_SUPPORT
1683 /* Values are taken from Linux drivers for userland software compatibility */
1684 #define PS2_MOUSE_VENDOR 0x0002
1685 #define PS2_MOUSE_GENERIC_PRODUCT 0x0001
1686 #define PS2_MOUSE_SYNAPTICS_NAME "SynPS/2 Synaptics TouchPad"
1687 #define PS2_MOUSE_SYNAPTICS_PRODUCT 0x0007
1688 #define PS2_MOUSE_TRACKPOINT_NAME "TPPS/2 IBM TrackPoint"
1689 #define PS2_MOUSE_TRACKPOINT_PRODUCT 0x000A
1690 #define PS2_MOUSE_ELANTECH_NAME "ETPS/2 Elantech Touchpad"
1691 #define PS2_MOUSE_ELANTECH_ST_NAME "ETPS/2 Elantech TrackPoint"
1692 #define PS2_MOUSE_ELANTECH_PRODUCT 0x000E
1694 #define ABSINFO_END { ABS_CNT, 0, 0, 0 }
1697 psm_support_abs_bulk(struct evdev_dev *evdev, const uint16_t info[][4])
1701 for (i = 0; info[i][0] != ABS_CNT; i++)
1702 evdev_support_abs(evdev, info[i][0], 0, info[i][1], info[i][2],
1707 psm_push_mt_finger(struct psm_softc *sc, int id, const finger_t *f)
1709 int y = sc->synhw.minimumYCoord + sc->synhw.maximumYCoord - f->y;
1711 evdev_push_abs(sc->evdev_a, ABS_MT_SLOT, id);
1712 evdev_push_abs(sc->evdev_a, ABS_MT_TRACKING_ID, id);
1713 evdev_push_abs(sc->evdev_a, ABS_MT_POSITION_X, f->x);
1714 evdev_push_abs(sc->evdev_a, ABS_MT_POSITION_Y, y);
1715 evdev_push_abs(sc->evdev_a, ABS_MT_PRESSURE, f->p);
1719 psm_push_st_finger(struct psm_softc *sc, const finger_t *f)
1721 int y = sc->synhw.minimumYCoord + sc->synhw.maximumYCoord - f->y;
1723 evdev_push_abs(sc->evdev_a, ABS_X, f->x);
1724 evdev_push_abs(sc->evdev_a, ABS_Y, y);
1725 evdev_push_abs(sc->evdev_a, ABS_PRESSURE, f->p);
1726 if (sc->synhw.capPalmDetect)
1727 evdev_push_abs(sc->evdev_a, ABS_TOOL_WIDTH, f->w);
1731 psm_release_mt_slot(struct evdev_dev *evdev, int32_t slot)
1734 evdev_push_abs(evdev, ABS_MT_SLOT, slot);
1735 evdev_push_abs(evdev, ABS_MT_TRACKING_ID, -1);
1739 psm_register(device_t dev, int model_code)
1741 struct psm_softc *sc = device_get_softc(dev);
1742 struct evdev_dev *evdev_r;
1743 int error, i, nbuttons, nwheels, product;
1744 bool is_pointing_stick;
1747 name = model_name(model_code);
1748 nbuttons = sc->hw.buttons;
1749 product = PS2_MOUSE_GENERIC_PRODUCT;
1751 is_pointing_stick = false;
1753 switch (model_code) {
1754 case MOUSE_MODEL_TRACKPOINT:
1755 name = PS2_MOUSE_TRACKPOINT_NAME;
1756 product = PS2_MOUSE_TRACKPOINT_PRODUCT;
1758 is_pointing_stick = true;
1761 case MOUSE_MODEL_ELANTECH:
1762 name = PS2_MOUSE_ELANTECH_ST_NAME;
1763 product = PS2_MOUSE_ELANTECH_PRODUCT;
1765 is_pointing_stick = true;
1768 case MOUSE_MODEL_MOUSEMANPLUS:
1769 case MOUSE_MODEL_4D:
1773 case MOUSE_MODEL_EXPLORER:
1774 case MOUSE_MODEL_INTELLI:
1775 case MOUSE_MODEL_NET:
1776 case MOUSE_MODEL_NETSCROLL:
1777 case MOUSE_MODEL_4DPLUS:
1782 evdev_r = evdev_alloc();
1783 evdev_set_name(evdev_r, name);
1784 evdev_set_phys(evdev_r, device_get_nameunit(dev));
1785 evdev_set_id(evdev_r, BUS_I8042, PS2_MOUSE_VENDOR, product, 0);
1786 evdev_set_methods(evdev_r, sc, &psm_ev_methods_r);
1788 evdev_support_prop(evdev_r, INPUT_PROP_POINTER);
1789 if (is_pointing_stick)
1790 evdev_support_prop(evdev_r, INPUT_PROP_POINTING_STICK);
1791 evdev_support_event(evdev_r, EV_SYN);
1792 evdev_support_event(evdev_r, EV_KEY);
1793 evdev_support_event(evdev_r, EV_REL);
1794 evdev_support_rel(evdev_r, REL_X);
1795 evdev_support_rel(evdev_r, REL_Y);
1798 evdev_support_rel(evdev_r, REL_HWHEEL);
1801 evdev_support_rel(evdev_r, REL_WHEEL);
1803 for (i = 0; i < nbuttons; i++)
1804 evdev_support_key(evdev_r, BTN_MOUSE + i);
1806 error = evdev_register_mtx(evdev_r, &Giant);
1808 evdev_free(evdev_r);
1810 sc->evdev_r = evdev_r;
1815 psm_register_synaptics(device_t dev)
1817 struct psm_softc *sc = device_get_softc(dev);
1818 const uint16_t synaptics_absinfo_st[][4] = {
1819 { ABS_X, sc->synhw.minimumXCoord,
1820 sc->synhw.maximumXCoord, sc->synhw.infoXupmm },
1821 { ABS_Y, sc->synhw.minimumYCoord,
1822 sc->synhw.maximumYCoord, sc->synhw.infoYupmm },
1823 { ABS_PRESSURE, 0, ELANTECH_FINGER_MAX_P, 0 },
1826 const uint16_t synaptics_absinfo_mt[][4] = {
1827 { ABS_MT_SLOT, 0, PSM_FINGERS-1, 0},
1828 { ABS_MT_TRACKING_ID, -1, PSM_FINGERS-1, 0},
1829 { ABS_MT_POSITION_X, sc->synhw.minimumXCoord,
1830 sc->synhw.maximumXCoord, sc->synhw.infoXupmm },
1831 { ABS_MT_POSITION_Y, sc->synhw.minimumYCoord,
1832 sc->synhw.maximumYCoord, sc->synhw.infoYupmm },
1833 { ABS_MT_PRESSURE, 0, ELANTECH_FINGER_MAX_P, 0 },
1836 struct evdev_dev *evdev_a;
1837 int error, i, guest_model;
1839 evdev_a = evdev_alloc();
1840 evdev_set_name(evdev_a, PS2_MOUSE_SYNAPTICS_NAME);
1841 evdev_set_phys(evdev_a, device_get_nameunit(dev));
1842 evdev_set_id(evdev_a, BUS_I8042, PS2_MOUSE_VENDOR,
1843 PS2_MOUSE_SYNAPTICS_PRODUCT, 0);
1844 evdev_set_methods(evdev_a, sc, &psm_ev_methods_a);
1846 evdev_support_event(evdev_a, EV_SYN);
1847 evdev_support_event(evdev_a, EV_KEY);
1848 evdev_support_event(evdev_a, EV_ABS);
1849 evdev_support_prop(evdev_a, INPUT_PROP_POINTER);
1850 if (sc->synhw.capAdvancedGestures)
1851 evdev_support_prop(evdev_a, INPUT_PROP_SEMI_MT);
1852 if (sc->synhw.capClickPad)
1853 evdev_support_prop(evdev_a, INPUT_PROP_BUTTONPAD);
1854 if (sc->synhw.capClickPad && sc->synhw.topButtonPad)
1855 evdev_support_prop(evdev_a, INPUT_PROP_TOPBUTTONPAD);
1856 evdev_support_key(evdev_a, BTN_TOUCH);
1857 evdev_support_nfingers(evdev_a, sc->synhw.capReportsV ? 5 : 3);
1858 psm_support_abs_bulk(evdev_a, synaptics_absinfo_st);
1859 if (sc->synhw.capAdvancedGestures || sc->synhw.capReportsV)
1860 psm_support_abs_bulk(evdev_a, synaptics_absinfo_mt);
1861 if (sc->synhw.capPalmDetect)
1862 evdev_support_abs(evdev_a, ABS_TOOL_WIDTH, 0, 0, 15, 0, 0, 0);
1863 evdev_support_key(evdev_a, BTN_LEFT);
1864 if (!sc->synhw.capClickPad) {
1865 evdev_support_key(evdev_a, BTN_RIGHT);
1866 if (sc->synhw.capExtended && sc->synhw.capMiddle)
1867 evdev_support_key(evdev_a, BTN_MIDDLE);
1869 if (sc->synhw.capExtended && sc->synhw.capFourButtons) {
1870 evdev_support_key(evdev_a, BTN_BACK);
1871 evdev_support_key(evdev_a, BTN_FORWARD);
1873 if (sc->synhw.capExtended && (sc->synhw.nExtendedButtons > 0))
1874 for (i = 0; i < sc->synhw.nExtendedButtons; i++)
1875 evdev_support_key(evdev_a, BTN_0 + i);
1877 error = evdev_register_mtx(evdev_a, &Giant);
1878 if (!error && (sc->synhw.capPassthrough || sc->muxport != PSM_NOMUX)) {
1879 guest_model = sc->tpinfo.sysctl_tree != NULL ?
1880 MOUSE_MODEL_TRACKPOINT : MOUSE_MODEL_GENERIC;
1881 error = psm_register(dev, guest_model);
1884 evdev_free(evdev_a);
1886 sc->evdev_a = evdev_a;
1891 psm_register_elantech(device_t dev)
1893 struct psm_softc *sc = device_get_softc(dev);
1894 const uint16_t elantech_absinfo[][4] = {
1895 { ABS_X, 0, sc->elanhw.sizex,
1897 { ABS_Y, 0, sc->elanhw.sizey,
1899 { ABS_PRESSURE, 0, ELANTECH_FINGER_MAX_P, 0 },
1900 { ABS_TOOL_WIDTH, 0, ELANTECH_FINGER_MAX_W, 0 },
1901 { ABS_MT_SLOT, 0, ELANTECH_MAX_FINGERS - 1, 0 },
1902 { ABS_MT_TRACKING_ID, -1, ELANTECH_MAX_FINGERS - 1, 0 },
1903 { ABS_MT_POSITION_X, 0, sc->elanhw.sizex,
1905 { ABS_MT_POSITION_Y, 0, sc->elanhw.sizey,
1907 { ABS_MT_PRESSURE, 0, ELANTECH_FINGER_MAX_P, 0 },
1908 { ABS_MT_TOUCH_MAJOR, 0, ELANTECH_FINGER_MAX_W *
1909 sc->elanhw.dptracex, 0 },
1912 struct evdev_dev *evdev_a;
1915 evdev_a = evdev_alloc();
1916 evdev_set_name(evdev_a, PS2_MOUSE_ELANTECH_NAME);
1917 evdev_set_phys(evdev_a, device_get_nameunit(dev));
1918 evdev_set_id(evdev_a, BUS_I8042, PS2_MOUSE_VENDOR,
1919 PS2_MOUSE_ELANTECH_PRODUCT, 0);
1920 evdev_set_methods(evdev_a, sc, &psm_ev_methods_a);
1922 evdev_support_event(evdev_a, EV_SYN);
1923 evdev_support_event(evdev_a, EV_KEY);
1924 evdev_support_event(evdev_a, EV_ABS);
1925 evdev_support_prop(evdev_a, INPUT_PROP_POINTER);
1926 if (sc->elanhw.issemimt)
1927 evdev_support_prop(evdev_a, INPUT_PROP_SEMI_MT);
1928 if (sc->elanhw.isclickpad)
1929 evdev_support_prop(evdev_a, INPUT_PROP_BUTTONPAD);
1930 evdev_support_key(evdev_a, BTN_TOUCH);
1931 evdev_support_nfingers(evdev_a, ELANTECH_MAX_FINGERS);
1932 evdev_support_key(evdev_a, BTN_LEFT);
1933 if (!sc->elanhw.isclickpad)
1934 evdev_support_key(evdev_a, BTN_RIGHT);
1935 psm_support_abs_bulk(evdev_a, elantech_absinfo);
1937 error = evdev_register_mtx(evdev_a, &Giant);
1938 if (!error && sc->elanhw.hastrackpoint)
1939 error = psm_register(dev, MOUSE_MODEL_ELANTECH);
1941 evdev_free(evdev_a);
1943 sc->evdev_a = evdev_a;
1949 psmattach(device_t dev)
1951 struct make_dev_args mda;
1952 int unit = device_get_unit(dev);
1953 struct psm_softc *sc = device_get_softc(dev);
1957 /* Setup initial state */
1958 sc->state = PSM_VALID;
1959 callout_init(&sc->callout, 0);
1960 callout_init(&sc->softcallout, 0);
1962 /* Setup our interrupt handler */
1964 sc->intr = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE);
1965 if (sc->intr == NULL)
1967 error = bus_setup_intr(dev, sc->intr, INTR_TYPE_TTY, NULL, psmintr, sc,
1973 make_dev_args_init(&mda);
1974 mda.mda_devsw = &psm_cdevsw;
1975 mda.mda_mode = 0666;
1976 mda.mda_si_drv1 = sc;
1978 if ((error = make_dev_s(&mda, &sc->dev, "psm%d", unit)) != 0)
1980 if ((error = make_dev_s(&mda, &sc->bdev, "bpsm%d", unit)) != 0)
1983 #ifdef EVDEV_SUPPORT
1984 switch (sc->hw.model) {
1985 case MOUSE_MODEL_SYNAPTICS:
1986 error = psm_register_synaptics(dev);
1989 case MOUSE_MODEL_ELANTECH:
1990 error = psm_register_elantech(dev);
1994 error = psm_register(dev, sc->hw.model);
2001 /* Some touchpad devices need full reinitialization after suspend. */
2002 switch (sc->hw.model) {
2003 case MOUSE_MODEL_SYNAPTICS:
2004 case MOUSE_MODEL_GLIDEPOINT:
2005 case MOUSE_MODEL_VERSAPAD:
2006 case MOUSE_MODEL_ELANTECH:
2007 sc->config |= PSM_CONFIG_INITAFTERSUSPEND;
2010 if (sc->synhw.infoMajor >= 4 || sc->tphw > 0)
2011 sc->config |= PSM_CONFIG_INITAFTERSUSPEND;
2015 /* Elantech trackpad`s sync bit differs from touchpad`s one */
2016 if (sc->hw.model == MOUSE_MODEL_ELANTECH &&
2017 (sc->elanhw.hascrc || sc->elanhw.hastrackpoint)) {
2018 sc->config |= PSM_CONFIG_NOCHECKSYNC;
2019 sc->flags &= ~PSM_NEED_SYNCBITS;
2023 printf("psm%d: model %s, device ID %d\n",
2024 unit, model_name(sc->hw.model), sc->hw.hwid & 0x00ff);
2026 printf("psm%d: model %s, device ID %d-%02x, %d buttons\n",
2027 unit, model_name(sc->hw.model), sc->hw.hwid & 0x00ff,
2028 sc->hw.hwid >> 8, sc->hw.buttons);
2029 printf("psm%d: config:%08x, flags:%08x, packet size:%d\n",
2030 unit, sc->config, sc->flags, sc->mode.packetsize);
2031 printf("psm%d: syncmask:%02x, syncbits:%02x%s\n",
2032 unit, sc->mode.syncmask[0], sc->mode.syncmask[1],
2033 sc->config & PSM_CONFIG_NOCHECKSYNC ? " (sync not checked)" : "");
2041 bus_release_resource(dev, SYS_RES_IRQ, rid, sc->intr);
2042 if (sc->dev != NULL)
2043 destroy_dev(sc->dev);
2044 if (sc->bdev != NULL)
2045 destroy_dev(sc->bdev);
2051 psmdetach(device_t dev)
2053 struct psm_softc *sc;
2056 sc = device_get_softc(dev);
2057 if (sc->state & PSM_OPEN)
2060 #ifdef EVDEV_SUPPORT
2061 evdev_free(sc->evdev_r);
2062 evdev_free(sc->evdev_a);
2066 bus_teardown_intr(dev, sc->intr, sc->ih);
2067 bus_release_resource(dev, SYS_RES_IRQ, rid, sc->intr);
2069 destroy_dev(sc->dev);
2070 destroy_dev(sc->bdev);
2072 callout_drain(&sc->callout);
2073 callout_drain(&sc->softcallout);
2078 #ifdef EVDEV_SUPPORT
2080 psm_ev_open_r(struct evdev_dev *evdev)
2082 struct psm_softc *sc = evdev_get_softc(evdev);
2085 /* Get device data */
2086 if ((sc->state & PSM_VALID) == 0) {
2087 /* the device is no longer valid/functioning */
2091 if (!(sc->state & (PSM_OPEN | PSM_EV_OPEN_A)))
2095 sc->state |= PSM_EV_OPEN_R;
2101 psm_ev_close_r(struct evdev_dev *evdev)
2103 struct psm_softc *sc = evdev_get_softc(evdev);
2106 sc->state &= ~PSM_EV_OPEN_R;
2108 if (sc->state & (PSM_OPEN | PSM_EV_OPEN_A))
2111 if (sc->state & PSM_VALID)
2118 psm_ev_open_a(struct evdev_dev *evdev)
2120 struct psm_softc *sc = evdev_get_softc(evdev);
2123 /* Get device data */
2124 if ((sc->state & PSM_VALID) == 0) {
2125 /* the device is no longer valid/functioning */
2129 if (!(sc->state & (PSM_OPEN | PSM_EV_OPEN_R)))
2133 sc->state |= PSM_EV_OPEN_A;
2139 psm_ev_close_a(struct evdev_dev *evdev)
2141 struct psm_softc *sc = evdev_get_softc(evdev);
2144 sc->state &= ~PSM_EV_OPEN_A;
2146 if (sc->state & (PSM_OPEN | PSM_EV_OPEN_R))
2149 if (sc->state & PSM_VALID)
2157 psm_cdev_open(struct cdev *dev, int flag, int fmt, struct thread *td)
2159 struct psm_softc *sc;
2162 /* Get device data */
2164 if ((sc == NULL) || (sc->state & PSM_VALID) == 0) {
2165 /* the device is no longer valid/functioning */
2169 /* Disallow multiple opens */
2170 if (sc->state & PSM_OPEN)
2173 device_busy(devclass_get_device(psm_devclass, sc->unit));
2175 #ifdef EVDEV_SUPPORT
2176 /* Already opened by evdev */
2177 if (!(sc->state & (PSM_EV_OPEN_R | PSM_EV_OPEN_A)))
2182 sc->state |= PSM_OPEN;
2184 device_unbusy(devclass_get_device(psm_devclass, sc->unit));
2190 psm_cdev_close(struct cdev *dev, int flag, int fmt, struct thread *td)
2192 struct psm_softc *sc;
2195 /* Get device data */
2197 if ((sc == NULL) || (sc->state & PSM_VALID) == 0) {
2198 /* the device is no longer valid/functioning */
2202 #ifdef EVDEV_SUPPORT
2203 /* Still opened by evdev */
2204 if (!(sc->state & (PSM_EV_OPEN_R | PSM_EV_OPEN_A)))
2209 sc->state &= ~PSM_OPEN;
2210 /* clean up and sigio requests */
2211 if (sc->async != NULL) {
2212 funsetown(&sc->async);
2215 device_unbusy(devclass_get_device(psm_devclass, sc->unit));
2222 psmopen(struct psm_softc *sc)
2228 /* Initialize state */
2229 sc->mode.level = sc->dflt_mode.level;
2230 sc->mode.protocol = sc->dflt_mode.protocol;
2231 sc->watchdog = FALSE;
2234 /* flush the event queue */
2235 sc->queue.count = 0;
2238 sc->status.flags = 0;
2239 sc->status.button = 0;
2240 sc->status.obutton = 0;
2245 sc->pqueue_start = 0;
2248 /* empty input buffer */
2253 /* don't let timeout routines in the keyboard driver to poll the kbdc */
2254 if (!kbdc_lock(sc->kbdc, TRUE))
2257 /* save the current controller command byte */
2259 command_byte = get_controller_command_byte(sc->kbdc);
2261 /* enable the aux port and temporalily disable the keyboard */
2262 if (command_byte == -1 || !set_controller_command_byte(sc->kbdc,
2263 kbdc_get_device_mask(sc->kbdc),
2264 KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT |
2265 KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
2266 /* CONTROLLER ERROR; do you know how to get out of this? */
2267 kbdc_lock(sc->kbdc, FALSE);
2270 "psm%d: unable to set the command byte (psmopen).\n",
2275 * Now that the keyboard controller is told not to generate
2276 * the keyboard and mouse interrupts, call `splx()' to allow
2277 * the other tty interrupts. The clock interrupt may also occur,
2278 * but timeout routines will be blocked by the poll flag set
2283 /* enable the mouse device */
2284 err = doopen(sc, command_byte);
2287 kbdc_lock(sc->kbdc, FALSE);
2292 psmclose(struct psm_softc *sc)
2298 /* don't let timeout routines in the keyboard driver to poll the kbdc */
2299 if (!kbdc_lock(sc->kbdc, TRUE))
2302 /* save the current controller command byte */
2304 command_byte = get_controller_command_byte(sc->kbdc);
2305 if (command_byte == -1) {
2306 kbdc_lock(sc->kbdc, FALSE);
2311 /* disable the aux interrupt and temporalily disable the keyboard */
2312 if (!set_controller_command_byte(sc->kbdc,
2313 kbdc_get_device_mask(sc->kbdc),
2314 KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT |
2315 KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
2317 "psm%d: failed to disable the aux int (psmclose).\n",
2319 /* CONTROLLER ERROR;
2320 * NOTE: we shall force our way through. Because the only
2321 * ill effect we shall see is that we may not be able
2322 * to read ACK from the mouse, and it doesn't matter much
2323 * so long as the mouse will accept the DISABLE command.
2328 /* stop the watchdog timer */
2329 callout_stop(&sc->callout);
2331 /* remove anything left in the output buffer */
2332 empty_aux_buffer(sc->kbdc, 10);
2334 /* disable the aux device, port and interrupt */
2335 if (sc->state & PSM_VALID) {
2336 if (!disable_aux_dev(sc->kbdc)) {
2338 * NOTE: we don't return (error) and continue,
2339 * pretending we have successfully disabled the device.
2340 * It's OK because the interrupt routine will discard
2341 * any data from the mouse hereafter.
2344 "psm%d: failed to disable the device (psmclose).\n",
2348 if (get_mouse_status(sc->kbdc, stat, 0, 3) < 3)
2350 "psm%d: failed to get status (psmclose).\n",
2354 if (!set_controller_command_byte(sc->kbdc,
2355 kbdc_get_device_mask(sc->kbdc),
2356 (command_byte & KBD_KBD_CONTROL_BITS) |
2357 KBD_DISABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
2360 * we shall ignore this error; see the above comment.
2363 "psm%d: failed to disable the aux port (psmclose).\n",
2367 /* remove anything left in the output buffer */
2368 empty_aux_buffer(sc->kbdc, 10);
2370 /* close is almost always successful */
2371 kbdc_lock(sc->kbdc, FALSE);
2376 tame_mouse(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *status,
2379 static u_char butmapps2[8] = {
2381 MOUSE_PS2_BUTTON1DOWN,
2382 MOUSE_PS2_BUTTON2DOWN,
2383 MOUSE_PS2_BUTTON1DOWN | MOUSE_PS2_BUTTON2DOWN,
2384 MOUSE_PS2_BUTTON3DOWN,
2385 MOUSE_PS2_BUTTON1DOWN | MOUSE_PS2_BUTTON3DOWN,
2386 MOUSE_PS2_BUTTON2DOWN | MOUSE_PS2_BUTTON3DOWN,
2387 MOUSE_PS2_BUTTON1DOWN | MOUSE_PS2_BUTTON2DOWN |
2388 MOUSE_PS2_BUTTON3DOWN,
2390 static u_char butmapmsc[8] = {
2391 MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON2UP |
2392 MOUSE_MSC_BUTTON3UP,
2393 MOUSE_MSC_BUTTON2UP | MOUSE_MSC_BUTTON3UP,
2394 MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON3UP,
2395 MOUSE_MSC_BUTTON3UP,
2396 MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON2UP,
2397 MOUSE_MSC_BUTTON2UP,
2398 MOUSE_MSC_BUTTON1UP,
2404 if (sc->mode.level == PSM_LEVEL_BASE) {
2405 mapped = status->button & ~MOUSE_BUTTON4DOWN;
2406 if (status->button & MOUSE_BUTTON4DOWN)
2407 mapped |= MOUSE_BUTTON1DOWN;
2408 status->button = mapped;
2409 buf[0] = MOUSE_PS2_SYNC | butmapps2[mapped & MOUSE_STDBUTTONS];
2410 i = imax(imin(status->dx, 255), -256);
2412 buf[0] |= MOUSE_PS2_XNEG;
2414 i = imax(imin(status->dy, 255), -256);
2416 buf[0] |= MOUSE_PS2_YNEG;
2418 return (MOUSE_PS2_PACKETSIZE);
2419 } else if (sc->mode.level == PSM_LEVEL_STANDARD) {
2420 buf[0] = MOUSE_MSC_SYNC |
2421 butmapmsc[status->button & MOUSE_STDBUTTONS];
2422 i = imax(imin(status->dx, 255), -256);
2424 buf[3] = i - buf[1];
2425 i = imax(imin(status->dy, 255), -256);
2427 buf[4] = i - buf[2];
2428 i = imax(imin(status->dz, 127), -128);
2429 buf[5] = (i >> 1) & 0x7f;
2430 buf[6] = (i - (i >> 1)) & 0x7f;
2431 buf[7] = (~status->button >> 3) & 0x7f;
2432 return (MOUSE_SYS_PACKETSIZE);
2434 return (pb->inputbytes);
2438 psmread(struct cdev *dev, struct uio *uio, int flag)
2440 struct psm_softc *sc = dev->si_drv1;
2441 u_char buf[PSM_SMALLBUFSIZE];
2446 if ((sc->state & PSM_VALID) == 0)
2449 /* block until mouse activity occurred */
2451 while (sc->queue.count <= 0) {
2452 if (dev != sc->bdev) {
2454 return (EWOULDBLOCK);
2456 sc->state |= PSM_ASLP;
2457 error = tsleep(sc, PZERO | PCATCH, "psmrea", 0);
2458 sc->state &= ~PSM_ASLP;
2462 } else if ((sc->state & PSM_VALID) == 0) {
2463 /* the device disappeared! */
2470 /* copy data to the user land */
2471 while ((sc->queue.count > 0) && (uio->uio_resid > 0)) {
2473 l = imin(sc->queue.count, uio->uio_resid);
2474 if (l > sizeof(buf))
2476 if (l > sizeof(sc->queue.buf) - sc->queue.head) {
2477 bcopy(&sc->queue.buf[sc->queue.head], &buf[0],
2478 sizeof(sc->queue.buf) - sc->queue.head);
2479 bcopy(&sc->queue.buf[0],
2480 &buf[sizeof(sc->queue.buf) - sc->queue.head],
2481 l - (sizeof(sc->queue.buf) - sc->queue.head));
2483 bcopy(&sc->queue.buf[sc->queue.head], &buf[0], l);
2484 sc->queue.count -= l;
2485 sc->queue.head = (sc->queue.head + l) % sizeof(sc->queue.buf);
2487 error = uiomove(buf, l, uio);
2496 block_mouse_data(struct psm_softc *sc, int *c)
2500 if (!kbdc_lock(sc->kbdc, TRUE))
2504 *c = get_controller_command_byte(sc->kbdc);
2505 if ((*c == -1) || !set_controller_command_byte(sc->kbdc,
2506 kbdc_get_device_mask(sc->kbdc),
2507 KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT |
2508 KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
2509 /* this is CONTROLLER ERROR */
2511 kbdc_lock(sc->kbdc, FALSE);
2516 * The device may be in the middle of status data transmission.
2517 * The transmission will be interrupted, thus, incomplete status
2518 * data must be discarded. Although the aux interrupt is disabled
2519 * at the keyboard controller level, at most one aux interrupt
2520 * may have already been pending and a data byte is in the
2521 * output buffer; throw it away. Note that the second argument
2522 * to `empty_aux_buffer()' is zero, so that the call will just
2523 * flush the internal queue.
2524 * `psmintr()' will be invoked after `splx()' if an interrupt is
2525 * pending; it will see no data and returns immediately.
2527 empty_aux_buffer(sc->kbdc, 0); /* flush the queue */
2528 read_aux_data_no_wait(sc->kbdc); /* throw away data if any */
2536 dropqueue(struct psm_softc *sc)
2539 sc->queue.count = 0;
2542 if ((sc->state & PSM_SOFTARMED) != 0) {
2543 sc->state &= ~PSM_SOFTARMED;
2544 callout_stop(&sc->softcallout);
2546 sc->pqueue_start = sc->pqueue_end;
2550 flushpackets(struct psm_softc *sc)
2554 bzero(&sc->pqueue, sizeof(sc->pqueue));
2558 unblock_mouse_data(struct psm_softc *sc, int c)
2563 * We may have seen a part of status data during `set_mouse_XXX()'.
2564 * they have been queued; flush it.
2566 empty_aux_buffer(sc->kbdc, 0);
2568 /* restore ports and interrupt */
2569 if (!set_controller_command_byte(sc->kbdc,
2570 kbdc_get_device_mask(sc->kbdc),
2571 c & (KBD_KBD_CONTROL_BITS | KBD_AUX_CONTROL_BITS))) {
2573 * CONTROLLER ERROR; this is serious, we may have
2574 * been left with the inaccessible keyboard and
2575 * the disabled mouse interrupt.
2580 kbdc_lock(sc->kbdc, FALSE);
2585 psmwrite(struct cdev *dev, struct uio *uio, int flag)
2587 struct psm_softc *sc = dev->si_drv1;
2588 u_char buf[PSM_SMALLBUFSIZE];
2589 int error = 0, i, l;
2591 if ((sc->state & PSM_VALID) == 0)
2594 if (sc->mode.level < PSM_LEVEL_NATIVE)
2597 /* copy data from the user land */
2598 while (uio->uio_resid > 0) {
2599 l = imin(PSM_SMALLBUFSIZE, uio->uio_resid);
2600 error = uiomove(buf, l, uio);
2603 for (i = 0; i < l; i++) {
2604 VLOG(4, (LOG_DEBUG, "psm: cmd 0x%x\n", buf[i]));
2605 if (!write_aux_command(sc->kbdc, buf[i])) {
2607 "psm: cmd 0x%x failed.\n", buf[i]));
2608 return (reinitialize(sc, FALSE));
2617 psmioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag,
2620 struct psm_softc *sc = dev->si_drv1;
2622 mousestatus_t status;
2629 /* Perform IOCTL command */
2632 case OLD_MOUSE_GETHWINFO:
2634 ((old_mousehw_t *)addr)->buttons = sc->hw.buttons;
2635 ((old_mousehw_t *)addr)->iftype = sc->hw.iftype;
2636 ((old_mousehw_t *)addr)->type = sc->hw.type;
2637 ((old_mousehw_t *)addr)->hwid = sc->hw.hwid & 0x00ff;
2641 case MOUSE_GETHWINFO:
2643 *(mousehw_t *)addr = sc->hw;
2644 if (sc->mode.level == PSM_LEVEL_BASE)
2645 ((mousehw_t *)addr)->model = MOUSE_MODEL_GENERIC;
2649 case MOUSE_SYN_GETHWINFO:
2651 if (sc->synhw.infoMajor >= 4)
2652 *(synapticshw_t *)addr = sc->synhw;
2658 case OLD_MOUSE_GETMODE:
2660 switch (sc->mode.level) {
2661 case PSM_LEVEL_BASE:
2662 ((old_mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2;
2664 case PSM_LEVEL_STANDARD:
2665 ((old_mousemode_t *)addr)->protocol =
2666 MOUSE_PROTO_SYSMOUSE;
2668 case PSM_LEVEL_NATIVE:
2669 ((old_mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2;
2672 ((old_mousemode_t *)addr)->rate = sc->mode.rate;
2673 ((old_mousemode_t *)addr)->resolution = sc->mode.resolution;
2674 ((old_mousemode_t *)addr)->accelfactor = sc->mode.accelfactor;
2680 *(mousemode_t *)addr = sc->mode;
2681 if ((sc->flags & PSM_NEED_SYNCBITS) != 0) {
2682 ((mousemode_t *)addr)->syncmask[0] = 0;
2683 ((mousemode_t *)addr)->syncmask[1] = 0;
2685 ((mousemode_t *)addr)->resolution =
2686 MOUSE_RES_LOW - sc->mode.resolution;
2687 switch (sc->mode.level) {
2688 case PSM_LEVEL_BASE:
2689 ((mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2;
2690 ((mousemode_t *)addr)->packetsize =
2691 MOUSE_PS2_PACKETSIZE;
2693 case PSM_LEVEL_STANDARD:
2694 ((mousemode_t *)addr)->protocol = MOUSE_PROTO_SYSMOUSE;
2695 ((mousemode_t *)addr)->packetsize =
2696 MOUSE_SYS_PACKETSIZE;
2697 ((mousemode_t *)addr)->syncmask[0] = MOUSE_SYS_SYNCMASK;
2698 ((mousemode_t *)addr)->syncmask[1] = MOUSE_SYS_SYNC;
2700 case PSM_LEVEL_NATIVE:
2701 /* FIXME: this isn't quite correct... XXX */
2702 ((mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2;
2708 case OLD_MOUSE_SETMODE:
2710 if (cmd == OLD_MOUSE_SETMODE) {
2711 mode.rate = ((old_mousemode_t *)addr)->rate;
2713 * resolution old I/F new I/F
2720 if (((old_mousemode_t *)addr)->resolution > 0)
2722 -((old_mousemode_t *)addr)->resolution - 1;
2724 mode.resolution = 0;
2726 ((old_mousemode_t *)addr)->accelfactor;
2729 mode = *(mousemode_t *)addr;
2731 /* adjust and validate parameters. */
2732 if (mode.rate > UCHAR_MAX)
2735 mode.rate = sc->dflt_mode.rate;
2736 else if (mode.rate == -1)
2737 /* don't change the current setting */
2739 else if (mode.rate < 0)
2741 if (mode.resolution >= UCHAR_MAX)
2743 if (mode.resolution >= 200)
2744 mode.resolution = MOUSE_RES_HIGH;
2745 else if (mode.resolution >= 100)
2746 mode.resolution = MOUSE_RES_MEDIUMHIGH;
2747 else if (mode.resolution >= 50)
2748 mode.resolution = MOUSE_RES_MEDIUMLOW;
2749 else if (mode.resolution > 0)
2750 mode.resolution = MOUSE_RES_LOW;
2751 if (mode.resolution == MOUSE_RES_DEFAULT)
2752 mode.resolution = sc->dflt_mode.resolution;
2753 else if (mode.resolution == -1)
2754 /* don't change the current setting */
2756 else if (mode.resolution < 0) /* MOUSE_RES_LOW/MEDIUM/HIGH */
2757 mode.resolution = MOUSE_RES_LOW - mode.resolution;
2758 if (mode.level == -1)
2759 /* don't change the current setting */
2760 mode.level = sc->mode.level;
2761 else if ((mode.level < PSM_LEVEL_MIN) ||
2762 (mode.level > PSM_LEVEL_MAX))
2764 if (mode.accelfactor == -1)
2765 /* don't change the current setting */
2766 mode.accelfactor = sc->mode.accelfactor;
2767 else if (mode.accelfactor < 0)
2770 /* don't allow anybody to poll the keyboard controller */
2771 error = block_mouse_data(sc, &command_byte);
2775 /* set mouse parameters */
2777 mode.rate = set_mouse_sampling_rate(sc->kbdc,
2779 if (mode.resolution >= 0)
2781 set_mouse_resolution(sc->kbdc, mode.resolution);
2782 set_mouse_scaling(sc->kbdc, 1);
2783 get_mouse_status(sc->kbdc, stat, 0, 3);
2786 sc->mode.rate = mode.rate;
2787 sc->mode.resolution = mode.resolution;
2788 sc->mode.accelfactor = mode.accelfactor;
2789 sc->mode.level = mode.level;
2792 unblock_mouse_data(sc, command_byte);
2795 case MOUSE_GETLEVEL:
2796 *(int *)addr = sc->mode.level;
2799 case MOUSE_SETLEVEL:
2800 if ((*(int *)addr < PSM_LEVEL_MIN) ||
2801 (*(int *)addr > PSM_LEVEL_MAX))
2803 sc->mode.level = *(int *)addr;
2806 case MOUSE_GETSTATUS:
2808 status = sc->status;
2809 sc->status.flags = 0;
2810 sc->status.obutton = sc->status.button;
2811 sc->status.button = 0;
2816 *(mousestatus_t *)addr = status;
2819 case MOUSE_READSTATE:
2820 case MOUSE_READDATA:
2821 data = (mousedata_t *)addr;
2822 if (data->len > sizeof(data->buf)/sizeof(data->buf[0]))
2825 error = block_mouse_data(sc, &command_byte);
2828 if ((data->len = get_mouse_status(sc->kbdc, data->buf,
2829 (cmd == MOUSE_READDATA) ? 1 : 0, data->len)) <= 0)
2831 unblock_mouse_data(sc, command_byte);
2834 #if (defined(MOUSE_SETRESOLUTION))
2835 case MOUSE_SETRESOLUTION:
2836 mode.resolution = *(int *)addr;
2837 if (mode.resolution >= UCHAR_MAX)
2839 else if (mode.resolution >= 200)
2840 mode.resolution = MOUSE_RES_HIGH;
2841 else if (mode.resolution >= 100)
2842 mode.resolution = MOUSE_RES_MEDIUMHIGH;
2843 else if (mode.resolution >= 50)
2844 mode.resolution = MOUSE_RES_MEDIUMLOW;
2845 else if (mode.resolution > 0)
2846 mode.resolution = MOUSE_RES_LOW;
2847 if (mode.resolution == MOUSE_RES_DEFAULT)
2848 mode.resolution = sc->dflt_mode.resolution;
2849 else if (mode.resolution == -1)
2850 mode.resolution = sc->mode.resolution;
2851 else if (mode.resolution < 0) /* MOUSE_RES_LOW/MEDIUM/HIGH */
2852 mode.resolution = MOUSE_RES_LOW - mode.resolution;
2854 error = block_mouse_data(sc, &command_byte);
2857 sc->mode.resolution =
2858 set_mouse_resolution(sc->kbdc, mode.resolution);
2859 if (sc->mode.resolution != mode.resolution)
2861 unblock_mouse_data(sc, command_byte);
2863 #endif /* MOUSE_SETRESOLUTION */
2865 #if (defined(MOUSE_SETRATE))
2867 mode.rate = *(int *)addr;
2868 if (mode.rate > UCHAR_MAX)
2871 mode.rate = sc->dflt_mode.rate;
2872 else if (mode.rate < 0)
2873 mode.rate = sc->mode.rate;
2875 error = block_mouse_data(sc, &command_byte);
2878 sc->mode.rate = set_mouse_sampling_rate(sc->kbdc, mode.rate);
2879 if (sc->mode.rate != mode.rate)
2881 unblock_mouse_data(sc, command_byte);
2883 #endif /* MOUSE_SETRATE */
2885 #if (defined(MOUSE_SETSCALING))
2886 case MOUSE_SETSCALING:
2887 if ((*(int *)addr <= 0) || (*(int *)addr > 2))
2890 error = block_mouse_data(sc, &command_byte);
2893 if (!set_mouse_scaling(sc->kbdc, *(int *)addr))
2895 unblock_mouse_data(sc, command_byte);
2897 #endif /* MOUSE_SETSCALING */
2899 #if (defined(MOUSE_GETHWID))
2901 error = block_mouse_data(sc, &command_byte);
2904 sc->hw.hwid &= ~0x00ff;
2905 sc->hw.hwid |= get_aux_id(sc->kbdc);
2906 *(int *)addr = sc->hw.hwid & 0x00ff;
2907 unblock_mouse_data(sc, command_byte);
2909 #endif /* MOUSE_GETHWID */
2915 error = fsetown(*(int *)addr, &sc->async);
2918 *(int *) addr = fgetown(&sc->async);
2928 psmtimeout(void *arg)
2930 struct psm_softc *sc;
2933 sc = (struct psm_softc *)arg;
2935 if (sc->watchdog && kbdc_lock(sc->kbdc, TRUE)) {
2936 VLOG(6, (LOG_DEBUG, "psm%d: lost interrupt?\n", sc->unit));
2938 kbdc_lock(sc->kbdc, FALSE);
2940 sc->watchdog = TRUE;
2942 callout_reset(&sc->callout, hz, psmtimeout, sc);
2945 /* Add all sysctls under the debug.psm and hw.psm nodes */
2946 static SYSCTL_NODE(_debug, OID_AUTO, psm, CTLFLAG_RD, 0, "ps/2 mouse");
2947 static SYSCTL_NODE(_hw, OID_AUTO, psm, CTLFLAG_RD, 0, "ps/2 mouse");
2949 SYSCTL_INT(_debug_psm, OID_AUTO, loglevel, CTLFLAG_RWTUN, &verbose, 0,
2952 static int psmhz = 20;
2953 SYSCTL_INT(_debug_psm, OID_AUTO, hz, CTLFLAG_RW, &psmhz, 0,
2954 "Frequency of the softcallout (in hz)");
2955 static int psmerrsecs = 2;
2956 SYSCTL_INT(_debug_psm, OID_AUTO, errsecs, CTLFLAG_RW, &psmerrsecs, 0,
2957 "Number of seconds during which packets will dropped after a sync error");
2958 static int psmerrusecs = 0;
2959 SYSCTL_INT(_debug_psm, OID_AUTO, errusecs, CTLFLAG_RW, &psmerrusecs, 0,
2960 "Microseconds to add to psmerrsecs");
2961 static int psmsecs = 0;
2962 SYSCTL_INT(_debug_psm, OID_AUTO, secs, CTLFLAG_RW, &psmsecs, 0,
2963 "Max number of seconds between soft interrupts");
2964 static int psmusecs = 500000;
2965 SYSCTL_INT(_debug_psm, OID_AUTO, usecs, CTLFLAG_RW, &psmusecs, 0,
2966 "Microseconds to add to psmsecs");
2967 static int pkterrthresh = 2;
2968 SYSCTL_INT(_debug_psm, OID_AUTO, pkterrthresh, CTLFLAG_RW, &pkterrthresh, 0,
2969 "Number of error packets allowed before reinitializing the mouse");
2971 SYSCTL_INT(_hw_psm, OID_AUTO, tap_enabled, CTLFLAG_RWTUN, &tap_enabled, 0,
2972 "Enable tap and drag gestures");
2973 static int tap_threshold = PSM_TAP_THRESHOLD;
2974 SYSCTL_INT(_hw_psm, OID_AUTO, tap_threshold, CTLFLAG_RW, &tap_threshold, 0,
2975 "Button tap threshold");
2976 static int tap_timeout = PSM_TAP_TIMEOUT;
2977 SYSCTL_INT(_hw_psm, OID_AUTO, tap_timeout, CTLFLAG_RW, &tap_timeout, 0,
2978 "Tap timeout for touchpads");
2981 SYSCTL_INT(_hw_psm, OID_AUTO, synaptics_support, CTLFLAG_RDTUN,
2982 &synaptics_support, 0, "Enable support for Synaptics touchpads");
2984 SYSCTL_INT(_hw_psm, OID_AUTO, trackpoint_support, CTLFLAG_RDTUN,
2985 &trackpoint_support, 0, "Enable support for IBM/Lenovo TrackPoint");
2987 SYSCTL_INT(_hw_psm, OID_AUTO, elantech_support, CTLFLAG_RDTUN,
2988 &elantech_support, 0, "Enable support for Elantech touchpads");
2993 struct psm_softc *sc = arg;
2998 if (aux_mux_is_enabled(sc->kbdc))
2999 VLOG(2, (LOG_DEBUG, "psmintr: active multiplexing mode is not "
3002 /* read until there is nothing to read */
3003 while((c = read_aux_data_no_wait(sc->kbdc)) != -1) {
3004 pb = &sc->pqueue[sc->pqueue_end];
3006 /* discard the byte if the device is not open */
3007 if (!(sc->state & (PSM_OPEN | PSM_EV_OPEN_R | PSM_EV_OPEN_A)))
3010 getmicrouptime(&now);
3011 if ((pb->inputbytes > 0) &&
3012 timevalcmp(&now, &sc->inputtimeout, >)) {
3013 VLOG(3, (LOG_DEBUG, "psmintr: delay too long; "
3014 "resetting byte count\n"));
3019 sc->inputtimeout.tv_sec = PSM_INPUT_TIMEOUT / 1000000;
3020 sc->inputtimeout.tv_usec = PSM_INPUT_TIMEOUT % 1000000;
3021 timevaladd(&sc->inputtimeout, &now);
3023 pb->ipacket[pb->inputbytes++] = c;
3025 if (sc->mode.level == PSM_LEVEL_NATIVE) {
3026 VLOG(4, (LOG_DEBUG, "psmintr: %02x\n", pb->ipacket[0]));
3031 if (pb->inputbytes < sc->mode.packetsize)
3035 "psmintr: %02x %02x %02x %02x %02x %02x\n",
3036 pb->ipacket[0], pb->ipacket[1], pb->ipacket[2],
3037 pb->ipacket[3], pb->ipacket[4], pb->ipacket[5]));
3042 if ((sc->flags & PSM_NEED_SYNCBITS) != 0) {
3043 sc->mode.syncmask[1] = (c & sc->mode.syncmask[0]);
3044 sc->flags &= ~PSM_NEED_SYNCBITS;
3046 "psmintr: Sync bytes now %04x,%04x\n",
3047 sc->mode.syncmask[0], sc->mode.syncmask[1]));
3048 } else if ((sc->config & PSM_CONFIG_NOCHECKSYNC) == 0 &&
3049 (c & sc->mode.syncmask[0]) != sc->mode.syncmask[1]) {
3050 VLOG(3, (LOG_DEBUG, "psmintr: out of sync "
3051 "(%04x != %04x) %d cmds since last error.\n",
3052 c & sc->mode.syncmask[0], sc->mode.syncmask[1],
3053 sc->cmdcount - sc->lasterr));
3054 sc->lasterr = sc->cmdcount;
3056 * The sync byte test is a weak measure of packet
3057 * validity. Conservatively discard any input yet
3058 * to be seen by userland when we detect a sync
3059 * error since there is a good chance some of
3060 * the queued packets have undetected errors.
3063 if (sc->syncerrors == 0)
3066 sc->lastinputerr = now;
3067 if (sc->syncerrors >= sc->mode.packetsize * 2 ||
3068 sc->pkterrors >= pkterrthresh) {
3070 * If we've failed to find a single sync byte
3071 * in 2 packets worth of data, or we've seen
3072 * persistent packet errors during the
3073 * validation period, reinitialize the mouse
3074 * in hopes of returning it to the expected
3078 "psmintr: reset the mouse.\n"));
3079 reinitialize(sc, TRUE);
3080 } else if (sc->syncerrors == sc->mode.packetsize) {
3082 * Try a soft reset after searching for a sync
3083 * byte through a packet length of bytes.
3086 "psmintr: re-enable the mouse.\n"));
3088 disable_aux_dev(sc->kbdc);
3089 enable_aux_dev(sc->kbdc);
3092 "psmintr: discard a byte (%d)\n",
3095 bcopy(&pb->ipacket[1], &pb->ipacket[0],
3102 * We have what appears to be a valid packet.
3103 * Reset the error counters.
3108 * Drop even good packets if they occur within a timeout
3109 * period of a sync error. This allows the detection of
3110 * a change in the mouse's packet mode without exposing
3111 * erratic mouse behavior to the user. Some KVMs forget
3112 * enhanced mouse modes during switch events.
3114 if (!timeelapsed(&sc->lastinputerr, psmerrsecs, psmerrusecs,
3121 * Now that we're out of the validation period, reset
3122 * the packet error count.
3128 if (++sc->pqueue_end >= PSM_PACKETQUEUE)
3131 * If we've filled the queue then call the softintr ourselves,
3132 * otherwise schedule the interrupt for later.
3134 if (!timeelapsed(&sc->lastsoftintr, psmsecs, psmusecs, &now) ||
3135 (sc->pqueue_end == sc->pqueue_start)) {
3136 if ((sc->state & PSM_SOFTARMED) != 0) {
3137 sc->state &= ~PSM_SOFTARMED;
3138 callout_stop(&sc->softcallout);
3141 } else if ((sc->state & PSM_SOFTARMED) == 0) {
3142 sc->state |= PSM_SOFTARMED;
3143 callout_reset(&sc->softcallout,
3144 psmhz < 1 ? 1 : (hz/psmhz), psmsoftintr, arg);
3150 proc_mmanplus(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *ms,
3151 int *x, int *y, int *z)
3155 * PS2++ protocol packet
3157 * b7 b6 b5 b4 b3 b2 b1 b0
3158 * byte 1: * 1 p3 p2 1 * * *
3159 * byte 2: c1 c2 p1 p0 d1 d0 1 0
3161 * p3-p0: packet type
3162 * c1, c2: c1 & c2 == 1, if p2 == 0
3163 * c1 & c2 == 0, if p2 == 1
3165 * packet type: 0 (device type)
3166 * See comments in enable_mmanplus() below.
3168 * packet type: 1 (wheel data)
3170 * b7 b6 b5 b4 b3 b2 b1 b0
3171 * byte 3: h * B5 B4 s d2 d1 d0
3173 * h: 1, if horizontal roller data
3174 * 0, if vertical roller data
3175 * B4, B5: button 4 and 5
3177 * d2-d0: roller data
3179 * packet type: 2 (reserved)
3181 if (((pb->ipacket[0] & MOUSE_PS2PLUS_SYNCMASK) == MOUSE_PS2PLUS_SYNC) &&
3182 (abs(*x) > 191) && MOUSE_PS2PLUS_CHECKBITS(pb->ipacket)) {
3184 * the extended data packet encodes button
3187 switch (MOUSE_PS2PLUS_PACKET_TYPE(pb->ipacket)) {
3189 /* wheel data packet */
3191 if (pb->ipacket[2] & 0x80) {
3192 /* XXX horizontal roller count - ignore it */
3195 /* vertical roller count */
3196 *z = (pb->ipacket[2] & MOUSE_PS2PLUS_ZNEG) ?
3197 (pb->ipacket[2] & 0x0f) - 16 :
3198 (pb->ipacket[2] & 0x0f);
3200 ms->button |= (pb->ipacket[2] &
3201 MOUSE_PS2PLUS_BUTTON4DOWN) ?
3202 MOUSE_BUTTON4DOWN : 0;
3203 ms->button |= (pb->ipacket[2] &
3204 MOUSE_PS2PLUS_BUTTON5DOWN) ?
3205 MOUSE_BUTTON5DOWN : 0;
3209 * this packet type is reserved by
3213 * IBM ScrollPoint Mouse uses this
3214 * packet type to encode both vertical
3215 * and horizontal scroll movement.
3218 /* horizontal count */
3219 if (pb->ipacket[2] & 0x0f)
3220 *z = (pb->ipacket[2] & MOUSE_SPOINT_WNEG) ?
3222 /* vertical count */
3223 if (pb->ipacket[2] & 0xf0)
3224 *z = (pb->ipacket[2] & MOUSE_SPOINT_ZNEG) ?
3228 /* device type packet - shouldn't happen */
3232 ms->button = ms->obutton;
3233 VLOG(1, (LOG_DEBUG, "psmintr: unknown PS2++ packet "
3234 "type %d: 0x%02x 0x%02x 0x%02x\n",
3235 MOUSE_PS2PLUS_PACKET_TYPE(pb->ipacket),
3236 pb->ipacket[0], pb->ipacket[1], pb->ipacket[2]));
3240 /* preserve button states */
3241 ms->button |= ms->obutton & MOUSE_EXTBUTTONS;
3246 proc_synaptics(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *ms,
3247 int *x, int *y, int *z)
3249 static int touchpad_buttons;
3250 static int guest_buttons;
3251 static int ew_finger_count;
3252 static finger_t f[PSM_FINGERS];
3253 int w, id, nfingers, palm, ewcode, extended_buttons, clickpad_pressed;
3255 extended_buttons = 0;
3257 /* TouchPad PS/2 absolute mode message format with capFourButtons:
3259 * Bits: 7 6 5 4 3 2 1 0 (LSB)
3260 * ------------------------------------------------
3261 * ipacket[0]: 1 0 W3 W2 0 W1 R L
3262 * ipacket[1]: Yb Ya Y9 Y8 Xb Xa X9 X8
3263 * ipacket[2]: Z7 Z6 Z5 Z4 Z3 Z2 Z1 Z0
3264 * ipacket[3]: 1 1 Yc Xc 0 W0 D^R U^L
3265 * ipacket[4]: X7 X6 X5 X4 X3 X2 X1 X0
3266 * ipacket[5]: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
3269 * L: left physical mouse button
3270 * R: right physical mouse button
3278 * Without capFourButtons but with nExtendeButtons and/or capMiddle
3280 * Bits: 7 6 5 4 3 2 1 0 (LSB)
3281 * ------------------------------------------------------
3282 * ipacket[3]: 1 1 Yc Xc 0 W0 E^R M^L
3283 * ipacket[4]: X7 X6 X5 X4 X3|b7 X2|b5 X1|b3 X0|b1
3284 * ipacket[5]: Y7 Y6 Y5 Y4 Y3|b8 Y2|b6 Y1|b4 Y0|b2
3287 * M: Middle physical mouse button
3288 * E: Extended mouse buttons reported instead of low bits of X and Y
3289 * b1-b8: Extended mouse buttons
3290 * Only ((nExtendedButtons + 1) >> 1) bits are used in packet
3291 * 4 and 5, for reading X and Y value they should be zeroed.
3293 * Absolute reportable limits: 0 - 6143.
3294 * Typical bezel limits: 1472 - 5472.
3295 * Typical edge marings: 1632 - 5312.
3297 * w = 3 Passthrough Packet
3299 * Byte 2,5,6 == Byte 1,2,3 of "Guest"
3302 if (!synaptics_support)
3305 /* Sanity check for out of sync packets. */
3306 if ((pb->ipacket[0] & 0xc8) != 0x80 ||
3307 (pb->ipacket[3] & 0xc8) != 0xc0)
3311 ms->button = ms->obutton;
3316 * z = 0 No finger contact
3317 * z = 10 Finger hovering near the pad
3318 * z = 30 Very light finger contact
3319 * z = 80 Normal finger contact
3320 * z = 110 Very heavy finger contact
3321 * z = 200 Finger lying flat on pad surface
3322 * z = 255 Maximum reportable Z
3324 *z = pb->ipacket[2];
3327 * Finger width value
3329 * w = 0 Two finger on the pad (capMultiFinger needed)
3330 * w = 1 Three or more fingers (capMultiFinger needed)
3331 * w = 2 Pen (instead of finger) (capPen needed)
3332 * w = 3 Reserved (passthrough?)
3333 * w = 4-7 Finger of normal width (capPalmDetect needed)
3334 * w = 8-14 Very wide finger or palm (capPalmDetect needed)
3335 * w = 15 Maximum reportable width (capPalmDetect needed)
3337 /* XXX Is checking capExtended enough? */
3338 if (sc->synhw.capExtended)
3339 w = ((pb->ipacket[0] & 0x30) >> 2) |
3340 ((pb->ipacket[0] & 0x04) >> 1) |
3341 ((pb->ipacket[3] & 0x04) >> 2);
3343 /* Assume a finger of regular width. */
3350 * Handle packets from the guest device. See:
3351 * Synaptics PS/2 TouchPad Interfacing Guide, Section 5.1
3353 if (sc->synhw.capPassthrough || sc->muxport != PSM_NOMUX) {
3354 *x = ((pb->ipacket[1] & 0x10) ?
3355 pb->ipacket[4] - 256 : pb->ipacket[4]);
3356 *y = ((pb->ipacket[1] & 0x20) ?
3357 pb->ipacket[5] - 256 : pb->ipacket[5]);
3361 if (pb->ipacket[1] & 0x01)
3362 guest_buttons |= MOUSE_BUTTON1DOWN;
3363 if (pb->ipacket[1] & 0x04)
3364 guest_buttons |= MOUSE_BUTTON2DOWN;
3365 if (pb->ipacket[1] & 0x02)
3366 guest_buttons |= MOUSE_BUTTON3DOWN;
3367 #ifdef EVDEV_SUPPORT
3368 if (evdev_rcpt_mask & EVDEV_RCPT_HW_MOUSE) {
3369 evdev_push_rel(sc->evdev_r, REL_X, *x);
3370 evdev_push_rel(sc->evdev_r, REL_Y, -*y);
3371 evdev_push_mouse_btn(sc->evdev_r,
3373 evdev_sync(sc->evdev_r);
3376 ms->button = touchpad_buttons | guest_buttons |
3377 sc->extended_buttons;
3382 /* Handle Extended W mode packets */
3383 ewcode = (pb->ipacket[5] & 0xf0) >> 4;
3387 /* Secondary finger */
3388 if (sc->synhw.capAdvancedGestures)
3390 .x = (((pb->ipacket[4] & 0x0f) << 8) |
3391 pb->ipacket[1]) << 1,
3392 .y = (((pb->ipacket[4] & 0xf0) << 4) |
3393 pb->ipacket[2]) << 1,
3394 .p = ((pb->ipacket[3] & 0x30) |
3395 (pb->ipacket[5] & 0x0f)) << 1,
3396 .w = PSM_FINGER_DEFAULT_W,
3397 .flags = PSM_FINGER_FUZZY,
3399 else if (sc->synhw.capReportsV)
3401 .x = (((pb->ipacket[4] & 0x0f) << 8) |
3402 (pb->ipacket[1] & 0xfe)) << 1,
3403 .y = (((pb->ipacket[4] & 0xf0) << 4) |
3404 (pb->ipacket[2] & 0xfe)) << 1,
3405 .p = ((pb->ipacket[3] & 0x30) |
3406 (pb->ipacket[5] & 0x0e)) << 1,
3407 .w = (((pb->ipacket[5] & 0x01) << 2) |
3408 ((pb->ipacket[2] & 0x01) << 1) |
3409 (pb->ipacket[1] & 0x01)) + 8,
3410 .flags = PSM_FINGER_FUZZY,
3414 ew_finger_count = pb->ipacket[1] & 0x0f;
3422 if (sc->synhw.capReportsV && ew_finger_count > 3) {
3423 nfingers = ew_finger_count;
3435 if (sc->syninfo.touchpad_off)
3438 /* Button presses */
3439 touchpad_buttons = 0;
3440 if (pb->ipacket[0] & 0x01)
3441 touchpad_buttons |= MOUSE_BUTTON1DOWN;
3442 if (pb->ipacket[0] & 0x02)
3443 touchpad_buttons |= MOUSE_BUTTON3DOWN;
3445 if (sc->synhw.capExtended && sc->synhw.capFourButtons) {
3446 if ((pb->ipacket[3] ^ pb->ipacket[0]) & 0x01)
3447 touchpad_buttons |= MOUSE_BUTTON4DOWN;
3448 if ((pb->ipacket[3] ^ pb->ipacket[0]) & 0x02)
3449 touchpad_buttons |= MOUSE_BUTTON5DOWN;
3450 } else if (sc->synhw.capExtended && sc->synhw.capMiddle &&
3451 !sc->synhw.capClickPad) {
3453 if ((pb->ipacket[0] ^ pb->ipacket[3]) & 0x01)
3454 touchpad_buttons |= MOUSE_BUTTON2DOWN;
3455 } else if (sc->synhw.capExtended && (sc->synhw.nExtendedButtons > 0)) {
3456 /* Extended Buttons */
3457 if ((pb->ipacket[0] ^ pb->ipacket[3]) & 0x02) {
3458 if (sc->syninfo.directional_scrolls) {
3459 if (pb->ipacket[4] & 0x01)
3460 extended_buttons |= MOUSE_BUTTON4DOWN;
3461 if (pb->ipacket[5] & 0x01)
3462 extended_buttons |= MOUSE_BUTTON5DOWN;
3463 if (pb->ipacket[4] & 0x02)
3464 extended_buttons |= MOUSE_BUTTON6DOWN;
3465 if (pb->ipacket[5] & 0x02)
3466 extended_buttons |= MOUSE_BUTTON7DOWN;
3468 if (pb->ipacket[4] & 0x01)
3469 extended_buttons |= MOUSE_BUTTON1DOWN;
3470 if (pb->ipacket[5] & 0x01)
3471 extended_buttons |= MOUSE_BUTTON3DOWN;
3472 if (pb->ipacket[4] & 0x02)
3473 extended_buttons |= MOUSE_BUTTON2DOWN;
3474 sc->extended_buttons = extended_buttons;
3478 * Zero out bits used by extended buttons to avoid
3479 * misinterpretation of the data absolute position.
3481 * The bits represented by
3483 * (nExtendedButtons + 1) >> 1
3485 * will be masked out in both bytes.
3486 * The mask for n bits is computed with the formula
3492 maskedbits = (sc->synhw.nExtendedButtons + 1) >> 1;
3493 mask = (1 << maskedbits) - 1;
3494 #ifdef EVDEV_SUPPORT
3496 if (evdev_rcpt_mask & EVDEV_RCPT_HW_MOUSE) {
3497 if (sc->synhw.capPassthrough) {
3498 evdev_push_mouse_btn(sc->evdev_r,
3500 evdev_sync(sc->evdev_r);
3502 for (i = 0; i < maskedbits; i++) {
3503 evdev_push_key(sc->evdev_a,
3505 pb->ipacket[4] & (1 << i));
3506 evdev_push_key(sc->evdev_a,
3508 pb->ipacket[5] & (1 << i));
3512 pb->ipacket[4] &= ~(mask);
3513 pb->ipacket[5] &= ~(mask);
3514 } else if (!sc->syninfo.directional_scrolls &&
3515 !sc->gesture.in_vscroll) {
3517 * Keep reporting MOUSE DOWN until we get a new packet
3518 * indicating otherwise.
3520 extended_buttons |= sc->extended_buttons;
3524 if (sc->synhw.capReportsV && nfingers > 1)
3526 .x = ((pb->ipacket[3] & 0x10) << 8) |
3527 ((pb->ipacket[1] & 0x0f) << 8) |
3528 (pb->ipacket[4] & 0xfd),
3529 .y = ((pb->ipacket[3] & 0x20) << 7) |
3530 ((pb->ipacket[1] & 0xf0) << 4) |
3531 (pb->ipacket[5] & 0xfd),
3533 .w = (((pb->ipacket[2] & 0x01) << 2) |
3534 (pb->ipacket[5] & 0x02) |
3535 ((pb->ipacket[4] & 0x02) >> 1)) + 8,
3536 .flags = PSM_FINGER_FUZZY,
3540 .x = ((pb->ipacket[3] & 0x10) << 8) |
3541 ((pb->ipacket[1] & 0x0f) << 8) |
3543 .y = ((pb->ipacket[3] & 0x20) << 7) |
3544 ((pb->ipacket[1] & 0xf0) << 4) |
3548 .flags = nfingers > 1 ? PSM_FINGER_FUZZY : 0,
3551 /* Ignore hovering and unmeasurable touches */
3552 if (f[0].p < sc->syninfo.min_pressure || f[0].x < 2)
3555 /* Handle ClickPad */
3556 if (sc->synhw.capClickPad) {
3557 clickpad_pressed = (pb->ipacket[0] ^ pb->ipacket[3]) & 0x01;
3558 if (sc->synhw.forcePad) {
3560 * Forcepads erroneously report button click if there
3561 * are 2 or more fingers on the touchpad breaking
3562 * multifinger gestures. To workaround this start
3563 * reporting a click only after 4 consecutive single
3564 * touch packets has been received.
3565 * Skip these packets in case more contacts appear.
3572 if (clickpad_pressed && sc->fpcount < INT_MAX)
3576 if (!clickpad_pressed)
3578 if (sc->fpcount >= sc->syninfo.window_min)
3579 touchpad_buttons |= MOUSE_BUTTON1DOWN;
3581 } else if (clickpad_pressed)
3582 touchpad_buttons |= MOUSE_BUTTON1DOWN;
3585 for (id = 0; id < PSM_FINGERS; id++)
3587 PSM_FINGER_RESET(f[id]);
3589 #ifdef EVDEV_SUPPORT
3590 if (evdev_rcpt_mask & EVDEV_RCPT_HW_MOUSE) {
3591 for (id = 0; id < PSM_FINGERS; id++) {
3592 if (PSM_FINGER_IS_SET(f[id]))
3593 psm_push_mt_finger(sc, id, &f[id]);
3595 psm_release_mt_slot(sc->evdev_a, id);
3597 evdev_push_key(sc->evdev_a, BTN_TOUCH, nfingers > 0);
3598 evdev_push_nfingers(sc->evdev_a, nfingers);
3600 psm_push_st_finger(sc, &f[0]);
3602 evdev_push_abs(sc->evdev_a, ABS_PRESSURE, 0);
3603 evdev_push_mouse_btn(sc->evdev_a, touchpad_buttons);
3604 if (sc->synhw.capExtended && sc->synhw.capFourButtons) {
3605 evdev_push_key(sc->evdev_a, BTN_FORWARD,
3606 touchpad_buttons & MOUSE_BUTTON4DOWN);
3607 evdev_push_key(sc->evdev_a, BTN_BACK,
3608 touchpad_buttons & MOUSE_BUTTON5DOWN);
3610 evdev_sync(sc->evdev_a);
3614 ms->button = touchpad_buttons;
3616 palm = psmpalmdetect(sc, &f[0], nfingers);
3618 /* Palm detection doesn't terminate the current action. */
3620 psmgestures(sc, &f[0], nfingers, ms);
3622 for (id = 0; id < PSM_FINGERS; id++)
3623 psmsmoother(sc, &f[id], id, ms, x, y);
3627 ms->button = ms->obutton;
3631 ms->button |= extended_buttons | guest_buttons;
3635 * Use the extra buttons as a scrollwheel
3637 * XXX X.Org uses the Z axis for vertical wheel only,
3638 * whereas moused(8) understands special values to differ
3639 * vertical and horizontal wheels.
3641 * xf86-input-mouse needs therefore a small patch to
3642 * understand these special values. Without it, the
3643 * horizontal wheel acts as a vertical wheel in X.Org.
3645 * That's why the horizontal wheel is disabled by
3648 if (ms->button & MOUSE_BUTTON4DOWN)
3650 else if (ms->button & MOUSE_BUTTON5DOWN)
3652 else if (ms->button & MOUSE_BUTTON6DOWN)
3654 else if (ms->button & MOUSE_BUTTON7DOWN)
3658 ms->button &= ~(MOUSE_BUTTON4DOWN | MOUSE_BUTTON5DOWN |
3659 MOUSE_BUTTON6DOWN | MOUSE_BUTTON7DOWN);
3665 proc_synaptics_mux(struct psm_softc *sc, packetbuf_t *pb)
3670 * Convert 3-byte interleaved mixture of Synaptics and generic mouse
3671 * packets into plain 6-byte Synaptics packet protocol.
3672 * While in hidden multiplexing mode KBC does some editing of the
3673 * packet stream. It remembers the button bits from the last packet
3674 * received from each device, and replaces the button bits of every
3675 * packet with the logical OR of all devices’ most recent button bits.
3676 * This button crosstalk should be filtered out as Synaptics and
3677 * generic mouse encode middle button presses in a different way.
3679 switch (pb->ipacket[0] & 0xc0) {
3680 case 0x80: /* First 3 bytes of Synaptics packet */
3681 bcopy(pb->ipacket, sc->muxsave, 3);
3682 /* Compute middle mouse button supression timeout. */
3683 sc->muxmidtimeout.tv_sec = 0;
3684 sc->muxmidtimeout.tv_usec = 50000; /* ~2-3 ints */
3685 timevaladd(&sc->muxmidtimeout, &sc->lastsoftintr);
3688 case 0xc0: /* Second 3 bytes of Synaptics packet */
3689 /* Join two 3-bytes absolute packets */
3690 bcopy(pb->ipacket, pb->ipacket + 3, 3);
3691 bcopy(sc->muxsave, pb->ipacket, 3);
3692 /* Prefer trackpoint buttons over touchpad's */
3693 pb->ipacket[0] &= ~(0x08 | sc->muxmsbuttons);
3694 pb->ipacket[3] &= ~(0x08 | sc->muxmsbuttons);
3695 butt = (pb->ipacket[3] & 0x03) << 2 | (pb->ipacket[0] & 0x03);
3696 /* Add hysteresis to remove spurious middle button events */
3697 if (butt != sc->muxtpbuttons && sc->fpcount < 1) {
3698 pb->ipacket[0] &= 0xfc;
3699 pb->ipacket[0] |= sc->muxtpbuttons & 0x03;
3700 pb->ipacket[3] &= 0xfc;
3701 pb->ipacket[3] |= sc->muxtpbuttons >> 2 & 0x03;
3705 sc->muxtpbuttons = butt;
3707 /* Filter out impossible w induced by middle trackpoint btn */
3708 if (sc->synhw.capExtended && !sc->synhw.capPassthrough &&
3709 (pb->ipacket[0] & 0x34) == 0x04 &&
3710 (pb->ipacket[3] & 0x04) == 0x04) {
3711 pb->ipacket[0] &= 0xfb;
3712 pb->ipacket[3] &= 0xfb;
3714 sc->muxsave[0] &= 0x30;
3717 default: /* Generic mouse (Trackpoint) packet */
3718 /* Filter out middle button events induced by some w values */
3719 if (sc->muxmsbuttons & 0x03 || pb->ipacket[0] & 0x03 ||
3720 (timevalcmp(&sc->lastsoftintr, &sc->muxmidtimeout, <=) &&
3721 (sc->muxsave[0] & 0x30 || sc->muxsave[2] > 8)))
3722 pb->ipacket[0] &= 0xfb;
3723 sc->muxmsbuttons = pb->ipacket[0] & 0x07;
3724 /* Convert to Synaptics pass-through protocol */
3725 pb->ipacket[4] = pb->ipacket[1];
3726 pb->ipacket[5] = pb->ipacket[2];
3727 pb->ipacket[1] = pb->ipacket[0];
3729 pb->ipacket[0] = 0x84 | (sc->muxtpbuttons & 0x03);
3730 pb->ipacket[3] = 0xc4 | (sc->muxtpbuttons >> 2 & 0x03);
3733 VLOG(4, (LOG_DEBUG, "synaptics: %02x %02x %02x %02x %02x %02x\n",
3734 pb->ipacket[0], pb->ipacket[1], pb->ipacket[2],
3735 pb->ipacket[3], pb->ipacket[4], pb->ipacket[5]));
3737 pb->inputbytes = MOUSE_SYNAPTICS_PACKETSIZE;
3742 psmpalmdetect(struct psm_softc *sc, finger_t *f, int nfingers)
3745 ((sc->synhw.capMultiFinger || sc->synhw.capAdvancedGestures) &&
3746 !sc->synhw.capReportsV && nfingers > 1) ||
3747 (sc->synhw.capReportsV && nfingers > 2) ||
3748 (sc->synhw.capPalmDetect && f->w <= sc->syninfo.max_width) ||
3749 (!sc->synhw.capPalmDetect && f->p <= sc->syninfo.max_pressure) ||
3750 (sc->synhw.capPen && f->flags & PSM_FINGER_IS_PEN))) {
3752 * We consider the packet irrelevant for the current
3754 * - the width isn't comprised in:
3756 * - the pressure isn't comprised in:
3757 * [min_pressure; max_pressure]
3758 * - pen aren't supported but PSM_FINGER_IS_PEN is set
3760 VLOG(2, (LOG_DEBUG, "synaptics: palm detected! (%d)\n", f->w));
3767 psmgestures(struct psm_softc *sc, finger_t *fingers, int nfingers,
3770 smoother_t *smoother;
3773 int y_ok, center_button, center_x, right_button, right_x, i;
3776 smoother = &sc->smoother[0];
3777 gest = &sc->gesture;
3779 /* Find first active finger. */
3781 for (i = 0; i < PSM_FINGERS; i++) {
3782 if (PSM_FINGER_IS_SET(fingers[i])) {
3784 smoother = &sc->smoother[i];
3791 * Check pressure to detect a real wanted action on the
3794 if (f->p >= sc->syninfo.min_pressure) {
3797 int start_x, start_y;
3799 int margin_top, margin_right, margin_bottom, margin_left;
3800 int window_min, window_max;
3801 int vscroll_hor_area, vscroll_ver_area;
3802 int two_finger_scroll;
3804 int three_finger_drag;
3807 /* XXX Verify values? */
3808 margin_top = sc->syninfo.margin_top;
3809 margin_right = sc->syninfo.margin_right;
3810 margin_bottom = sc->syninfo.margin_bottom;
3811 margin_left = sc->syninfo.margin_left;
3812 window_min = sc->syninfo.window_min;
3813 window_max = sc->syninfo.window_max;
3814 vscroll_hor_area = sc->syninfo.vscroll_hor_area;
3815 vscroll_ver_area = sc->syninfo.vscroll_ver_area;
3816 two_finger_scroll = sc->syninfo.two_finger_scroll;
3817 max_x = sc->syninfo.max_x;
3818 max_y = sc->syninfo.max_y;
3819 three_finger_drag = sc->syninfo.three_finger_drag;
3820 /* Read current absolute position. */
3825 * Limit the coordinates to the specified margins because
3826 * this area isn't very reliable.
3828 if (x0 <= margin_left)
3830 else if (x0 >= max_x - margin_right)
3831 x0 = max_x - margin_right;
3832 if (y0 <= margin_bottom)
3834 else if (y0 >= max_y - margin_top)
3835 y0 = max_y - margin_top;
3837 VLOG(3, (LOG_DEBUG, "synaptics: ipacket: [%d, %d], %d, %d\n",
3838 x0, y0, f->p, f->w));
3841 * If the action is just beginning, init the structure and
3842 * compute tap timeout.
3844 if (!(sc->flags & PSM_FLAGS_FINGERDOWN)) {
3845 VLOG(3, (LOG_DEBUG, "synaptics: ----\n"));
3847 /* Initialize queue. */
3848 gest->window_min = window_min;
3850 /* Reset pressure peak. */
3853 /* Reset fingers count. */
3854 gest->fingers_nb = 0;
3856 /* Reset virtual scrolling state. */
3857 gest->in_vscroll = 0;
3859 /* Compute tap timeout. */
3860 if (tap_enabled != 0) {
3861 gest->taptimeout = (struct timeval) {
3862 .tv_sec = tap_timeout / 1000000,
3863 .tv_usec = tap_timeout % 1000000,
3866 &gest->taptimeout, &sc->lastsoftintr);
3868 timevalclear(&gest->taptimeout);
3870 sc->flags |= PSM_FLAGS_FINGERDOWN;
3872 /* Smoother has not been reset yet */
3877 queue_len = smoother->queue_len + 1;
3878 start_x = smoother->start_x;
3879 start_y = smoother->start_y;
3882 /* Process ClickPad softbuttons */
3883 if (sc->synhw.capClickPad && ms->button & MOUSE_BUTTON1DOWN) {
3884 y_ok = sc->syninfo.softbuttons_y >= 0 ?
3885 start_y < sc->syninfo.softbuttons_y :
3886 start_y > max_y + sc->syninfo.softbuttons_y;
3888 center_button = MOUSE_BUTTON2DOWN;
3889 center_x = sc->syninfo.softbutton2_x;
3890 right_button = MOUSE_BUTTON3DOWN;
3891 right_x = sc->syninfo.softbutton3_x;
3893 if (center_x > 0 && right_x > 0 && center_x > right_x) {
3894 center_button = MOUSE_BUTTON3DOWN;
3895 center_x = sc->syninfo.softbutton3_x;
3896 right_button = MOUSE_BUTTON2DOWN;
3897 right_x = sc->syninfo.softbutton2_x;
3900 if (right_x > 0 && start_x > right_x && y_ok)
3901 ms->button = (ms->button &
3902 ~MOUSE_BUTTON1DOWN) | right_button;
3903 else if (center_x > 0 && start_x > center_x && y_ok)
3904 ms->button = (ms->button &
3905 ~MOUSE_BUTTON1DOWN) | center_button;
3908 /* If in tap-hold or three fingers, add the recorded button. */
3909 if (gest->in_taphold || (nfingers == 3 && three_finger_drag))
3910 ms->button |= gest->tap_button;
3913 * For tap, we keep the maximum number of fingers and the
3914 * pressure peak. Also with multiple fingers, we increase
3915 * the minimum window.
3918 gest->window_min = window_max;
3919 gest->fingers_nb = imax(nfingers, gest->fingers_nb);
3920 gest->zmax = imax(f->p, gest->zmax);
3922 /* Do we have enough packets to consider this a gesture? */
3923 if (queue_len < gest->window_min)
3929 /* Is a scrolling action occurring? */
3930 if (!gest->in_taphold && !ms->button &&
3931 (!gest->in_vscroll || two_finger_scroll)) {
3933 * A scrolling action must not conflict with a tap
3934 * action. Here are the conditions to consider a
3936 * - the action in a configurable area
3937 * - one of the following:
3938 * . the distance between the last packet and the
3939 * first should be above a configurable minimum
3942 dxp = abs(x0 - start_x);
3943 dyp = abs(y0 - start_y);
3945 if (timevalcmp(&sc->lastsoftintr, &gest->taptimeout, >) ||
3946 dxp >= sc->syninfo.vscroll_min_delta ||
3947 dyp >= sc->syninfo.vscroll_min_delta) {
3949 * Handle two finger scrolling.
3950 * Note that we don't rely on fingers_nb
3951 * as that keeps the maximum number of fingers.
3953 if (two_finger_scroll) {
3954 if (nfingers == 2) {
3961 /* Check for horizontal scrolling. */
3962 if ((vscroll_hor_area > 0 &&
3963 start_y <= vscroll_hor_area) ||
3964 (vscroll_hor_area < 0 &&
3966 max_y + vscroll_hor_area))
3967 gest->in_vscroll += 2;
3969 /* Check for vertical scrolling. */
3970 if ((vscroll_ver_area > 0 &&
3971 start_x <= vscroll_ver_area) ||
3972 (vscroll_ver_area < 0 &&
3974 max_x + vscroll_ver_area))
3975 gest->in_vscroll += 1;
3978 /* Avoid conflicts if area overlaps. */
3979 if (gest->in_vscroll >= 3)
3981 (dxp > dyp) ? 2 : 1;
3985 * Reset two finger scrolling when the number of fingers
3986 * is different from two or any button is pressed.
3988 if (two_finger_scroll && gest->in_vscroll != 0 &&
3989 (nfingers != 2 || ms->button))
3990 gest->in_vscroll = 0;
3993 "synaptics: virtual scrolling: %s "
3994 "(direction=%d, dxp=%d, dyp=%d, fingers=%d)\n",
3995 gest->in_vscroll ? "YES" : "NO",
3996 gest->in_vscroll, dxp, dyp,
3999 } else if (sc->flags & PSM_FLAGS_FINGERDOWN) {
4001 * An action is currently taking place but the pressure
4002 * dropped under the minimum, putting an end to it.
4004 int taphold_timeout, dx, dy, tap_max_delta;
4006 dx = abs(smoother->queue[smoother->queue_cursor].x -
4008 dy = abs(smoother->queue[smoother->queue_cursor].y -
4011 /* Max delta is disabled for multi-fingers tap. */
4012 if (gest->fingers_nb > 1)
4013 tap_max_delta = imax(dx, dy);
4015 tap_max_delta = sc->syninfo.tap_max_delta;
4017 sc->flags &= ~PSM_FLAGS_FINGERDOWN;
4019 /* Check for tap. */
4021 "synaptics: zmax=%d, dx=%d, dy=%d, "
4022 "delta=%d, fingers=%d, queue=%d\n",
4023 gest->zmax, dx, dy, tap_max_delta, gest->fingers_nb,
4024 smoother->queue_len));
4025 if (!gest->in_vscroll && gest->zmax >= tap_threshold &&
4026 timevalcmp(&sc->lastsoftintr, &gest->taptimeout, <=) &&
4027 dx <= tap_max_delta && dy <= tap_max_delta &&
4028 smoother->queue_len >= sc->syninfo.tap_min_queue) {
4031 * - the maximum pressure went over tap_threshold
4032 * - the action ended before tap_timeout
4034 * To handle tap-hold, we must delay any button push to
4037 if (gest->in_taphold) {
4039 * This is the second and last tap of a
4040 * double tap action, not a tap-hold.
4042 gest->in_taphold = 0;
4045 * For double-tap to work:
4046 * - no button press is emitted (to
4047 * simulate a button release)
4048 * - PSM_FLAGS_FINGERDOWN is set to
4049 * force the next packet to emit a
4053 "synaptics: button RELEASE: %d\n",
4055 sc->flags |= PSM_FLAGS_FINGERDOWN;
4057 /* Schedule button press on next interrupt */
4058 sc->idletimeout.tv_sec = psmhz > 1 ?
4060 sc->idletimeout.tv_usec = psmhz > 1 ?
4061 1000000 / psmhz : 0;
4064 * This is the first tap: we set the
4065 * tap-hold state and notify the button
4068 gest->in_taphold = 1;
4069 taphold_timeout = sc->syninfo.taphold_timeout;
4070 gest->taptimeout.tv_sec = taphold_timeout /
4072 gest->taptimeout.tv_usec = taphold_timeout %
4074 sc->idletimeout = gest->taptimeout;
4075 timevaladd(&gest->taptimeout,
4078 switch (gest->fingers_nb) {
4092 "synaptics: button PRESS: %d\n",
4094 ms->button |= gest->tap_button;
4098 * Not enough pressure or timeout: reset
4101 if (gest->in_taphold) {
4103 "synaptics: button RELEASE: %d\n",
4105 gest->in_taphold = 0;
4108 "synaptics: not a tap-hold\n"));
4111 } else if (!(sc->flags & PSM_FLAGS_FINGERDOWN) && gest->in_taphold) {
4113 * For a tap-hold to work, the button must remain down at
4114 * least until timeout (where the in_taphold flags will be
4115 * cleared) or during the next action.
4117 if (timevalcmp(&sc->lastsoftintr, &gest->taptimeout, <=)) {
4118 ms->button |= gest->tap_button;
4120 VLOG(2, (LOG_DEBUG, "synaptics: button RELEASE: %d\n",
4122 gest->in_taphold = 0;
4130 psmsmoother(struct psm_softc *sc, finger_t *f, int smoother_id,
4131 mousestatus_t *ms, int *x, int *y)
4133 smoother_t *smoother = &sc->smoother[smoother_id];
4134 gesture_t *gest = &(sc->gesture);
4137 * Check pressure to detect a real wanted action on the
4140 if (f->p >= sc->syninfo.min_pressure) {
4142 int cursor, peer, window;
4143 int dx, dy, dxp, dyp;
4144 int max_width, max_pressure;
4145 int margin_top, margin_right, margin_bottom, margin_left;
4146 int na_top, na_right, na_bottom, na_left;
4147 int window_min, window_max;
4149 int weight_current, weight_previous, weight_len_squared;
4150 int div_min, div_max, div_len;
4151 int vscroll_hor_area, vscroll_ver_area;
4152 int two_finger_scroll;
4154 int len, weight_prev_x, weight_prev_y;
4155 int div_max_x, div_max_y, div_x, div_y;
4160 /* XXX Verify values? */
4161 max_width = sc->syninfo.max_width;
4162 max_pressure = sc->syninfo.max_pressure;
4163 margin_top = sc->syninfo.margin_top;
4164 margin_right = sc->syninfo.margin_right;
4165 margin_bottom = sc->syninfo.margin_bottom;
4166 margin_left = sc->syninfo.margin_left;
4167 na_top = sc->syninfo.na_top;
4168 na_right = sc->syninfo.na_right;
4169 na_bottom = sc->syninfo.na_bottom;
4170 na_left = sc->syninfo.na_left;
4171 window_min = sc->syninfo.window_min;
4172 window_max = sc->syninfo.window_max;
4173 multiplicator = sc->syninfo.multiplicator;
4174 weight_current = sc->syninfo.weight_current;
4175 weight_previous = sc->syninfo.weight_previous;
4176 weight_len_squared = sc->syninfo.weight_len_squared;
4177 div_min = sc->syninfo.div_min;
4178 div_max = sc->syninfo.div_max;
4179 div_len = sc->syninfo.div_len;
4180 vscroll_hor_area = sc->syninfo.vscroll_hor_area;
4181 vscroll_ver_area = sc->syninfo.vscroll_ver_area;
4182 two_finger_scroll = sc->syninfo.two_finger_scroll;
4183 max_x = sc->syninfo.max_x;
4184 max_y = sc->syninfo.max_y;
4185 natural_scroll = sc->syninfo.natural_scroll;
4187 is_fuzzy = (f->flags & PSM_FINGER_FUZZY) != 0;
4189 /* Read current absolute position. */
4194 * Limit the coordinates to the specified margins because
4195 * this area isn't very reliable.
4197 if (x0 <= margin_left)
4199 else if (x0 >= max_x - margin_right)
4200 x0 = max_x - margin_right;
4201 if (y0 <= margin_bottom)
4203 else if (y0 >= max_y - margin_top)
4204 y0 = max_y - margin_top;
4206 /* If the action is just beginning, init the structure. */
4207 if (smoother->active == 0) {
4208 VLOG(3, (LOG_DEBUG, "smoother%d: ---\n", smoother_id));
4210 /* Store the first point of this action. */
4211 smoother->start_x = x0;
4212 smoother->start_y = y0;
4215 /* Initialize queue. */
4216 smoother->queue_cursor = SYNAPTICS_PACKETQUEUE;
4217 smoother->queue_len = 0;
4219 /* Reset average. */
4220 smoother->avg_dx = 0;
4221 smoother->avg_dy = 0;
4223 /* Reset squelch. */
4224 smoother->squelch_x = 0;
4225 smoother->squelch_y = 0;
4227 /* Activate queue */
4228 smoother->active = 1;
4230 /* Calculate the current delta. */
4231 cursor = smoother->queue_cursor;
4232 dx = x0 - smoother->queue[cursor].x;
4233 dy = y0 - smoother->queue[cursor].y;
4236 VLOG(3, (LOG_DEBUG, "smoother%d: ipacket: [%d, %d], %d, %d\n",
4237 smoother_id, x0, y0, f->p, f->w));
4239 /* Queue this new packet. */
4240 cursor = SYNAPTICS_QUEUE_CURSOR(smoother->queue_cursor - 1);
4241 smoother->queue[cursor].x = x0;
4242 smoother->queue[cursor].y = y0;
4243 smoother->queue_cursor = cursor;
4244 if (smoother->queue_len < SYNAPTICS_PACKETQUEUE)
4245 smoother->queue_len++;
4247 "smoother%d: cursor[%d]: x=%d, y=%d, dx=%d, dy=%d\n",
4248 smoother_id, cursor, x0, y0, dx, dy));
4250 /* Do we have enough packets to consider this a movement? */
4251 if (smoother->queue_len < gest->window_min)
4254 weight_prev_x = weight_prev_y = weight_previous;
4255 div_max_x = div_max_y = div_max;
4257 if (gest->in_vscroll) {
4258 /* Dividers are different with virtual scrolling. */
4259 div_min = sc->syninfo.vscroll_div_min;
4260 div_max_x = div_max_y = sc->syninfo.vscroll_div_max;
4263 * There's a lot of noise in coordinates when
4264 * the finger is on the touchpad's borders. When
4265 * using this area, we apply a special weight and
4268 if (x0 <= na_left || x0 >= max_x - na_right) {
4269 weight_prev_x = sc->syninfo.weight_previous_na;
4270 div_max_x = sc->syninfo.div_max_na;
4273 if (y0 <= na_bottom || y0 >= max_y - na_top) {
4274 weight_prev_y = sc->syninfo.weight_previous_na;
4275 div_max_y = sc->syninfo.div_max_na;
4280 * Calculate weights for the average operands and
4281 * the divisor. Both depend on the distance between
4282 * the current packet and a previous one (based on the
4285 window = imin(smoother->queue_len, window_max);
4286 peer = SYNAPTICS_QUEUE_CURSOR(cursor + window - 1);
4287 dxp = abs(x0 - smoother->queue[peer].x) + 1;
4288 dyp = abs(y0 - smoother->queue[peer].y) + 1;
4289 len = (dxp * dxp) + (dyp * dyp);
4290 weight_prev_x = imin(weight_prev_x,
4291 weight_len_squared * weight_prev_x / len);
4292 weight_prev_y = imin(weight_prev_y,
4293 weight_len_squared * weight_prev_y / len);
4295 len = (dxp + dyp) / 2;
4296 div_x = div_len * div_max_x / len;
4297 div_x = imin(div_max_x, div_x);
4298 div_x = imax(div_min, div_x);
4299 div_y = div_len * div_max_y / len;
4300 div_y = imin(div_max_y, div_y);
4301 div_y = imax(div_min, div_y);
4304 "smoother%d: peer=%d, len=%d, weight=%d/%d, div=%d/%d\n",
4305 smoother_id, peer, len, weight_prev_x, weight_prev_y,
4308 /* Compute averages. */
4310 (weight_current * dx * multiplicator +
4311 weight_prev_x * smoother->avg_dx) /
4312 (weight_current + weight_prev_x);
4315 (weight_current * dy * multiplicator +
4316 weight_prev_y * smoother->avg_dy) /
4317 (weight_current + weight_prev_y);
4320 "smoother%d: avg_dx~=%d, avg_dy~=%d\n", smoother_id,
4321 smoother->avg_dx / multiplicator,
4322 smoother->avg_dy / multiplicator));
4324 /* Use these averages to calculate x & y. */
4325 smoother->squelch_x += smoother->avg_dx;
4326 dxp = smoother->squelch_x / (div_x * multiplicator);
4327 smoother->squelch_x = smoother->squelch_x %
4328 (div_x * multiplicator);
4330 smoother->squelch_y += smoother->avg_dy;
4331 dyp = smoother->squelch_y / (div_y * multiplicator);
4332 smoother->squelch_y = smoother->squelch_y %
4333 (div_y * multiplicator);
4335 switch(gest->in_vscroll) {
4336 case 0: /* Pointer movement. */
4337 /* On real<->fuzzy finger switch the x/y pos jumps */
4338 if (is_fuzzy == smoother->is_fuzzy) {
4343 VLOG(3, (LOG_DEBUG, "smoother%d: [%d, %d] -> [%d, %d]\n",
4344 smoother_id, dx, dy, dxp, dyp));
4346 case 1: /* Vertical scrolling. */
4348 if (two_finger_scroll && natural_scroll)
4349 ms->button |= (dyp > 0) ?
4350 MOUSE_BUTTON5DOWN : MOUSE_BUTTON4DOWN;
4352 ms->button |= (dyp > 0) ?
4353 MOUSE_BUTTON4DOWN : MOUSE_BUTTON5DOWN;
4356 case 2: /* Horizontal scrolling. */
4358 if (two_finger_scroll && natural_scroll)
4359 ms->button |= (dxp > 0) ?
4360 MOUSE_BUTTON6DOWN : MOUSE_BUTTON7DOWN;
4362 ms->button |= (dxp > 0) ?
4363 MOUSE_BUTTON7DOWN : MOUSE_BUTTON6DOWN;
4368 smoother->is_fuzzy = is_fuzzy;
4372 * Deactivate queue. Note: We can not just reset queue here
4373 * as these values are still used by gesture processor.
4374 * So postpone reset till next touch.
4376 smoother->active = 0;
4381 proc_elantech(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *ms,
4382 int *x, int *y, int *z)
4384 static int touchpad_button, trackpoint_button;
4385 finger_t fn, f[ELANTECH_MAX_FINGERS];
4386 int pkt, id, scale, i, nfingers, mask, palm;
4388 if (!elantech_support)
4391 /* Determine packet format and do a sanity check for out of sync packets. */
4392 if (ELANTECH_PKT_IS_DEBOUNCE(pb, sc->elanhw.hwversion))
4393 pkt = ELANTECH_PKT_NOP;
4394 else if (sc->elanhw.hastrackpoint && ELANTECH_PKT_IS_TRACKPOINT(pb))
4395 pkt = ELANTECH_PKT_TRACKPOINT;
4397 switch (sc->elanhw.hwversion) {
4399 if (!ELANTECH_PKT_IS_V2(pb))
4402 pkt = (pb->ipacket[0] & 0xc0) == 0x80 ?
4403 ELANTECH_PKT_V2_2FINGER : ELANTECH_PKT_V2_COMMON;
4406 if (!ELANTECH_PKT_IS_V3_HEAD(pb, sc->elanhw.hascrc) &&
4407 !ELANTECH_PKT_IS_V3_TAIL(pb, sc->elanhw.hascrc))
4410 pkt = ELANTECH_PKT_V3;
4413 if (!ELANTECH_PKT_IS_V4(pb, sc->elanhw.hascrc))
4416 switch (pb->ipacket[3] & 0x03) {
4418 pkt = ELANTECH_PKT_V4_STATUS;
4421 pkt = ELANTECH_PKT_V4_HEAD;
4424 pkt = ELANTECH_PKT_V4_MOTION;
4434 VLOG(5, (LOG_DEBUG, "elantech: ipacket format: %d\n", pkt));
4436 for (id = 0; id < ELANTECH_MAX_FINGERS; id++)
4437 PSM_FINGER_RESET(f[id]);
4440 ms->button = ms->obutton;
4442 if (sc->syninfo.touchpad_off)
4446 * L: Left mouse button pressed
4447 * R: Right mouse button pressed
4448 * N: number of fingers on touchpad
4449 * X: absolute x value (horizontal)
4450 * Y: absolute y value (vertical)
4451 * W; width of the finger touch
4455 case ELANTECH_PKT_V2_COMMON: /* HW V2. One/Three finger touch */
4456 /* 7 6 5 4 3 2 1 0 (LSB)
4457 * -------------------------------------------
4458 * ipacket[0]: N1 N0 W3 W2 . . R L
4459 * ipacket[1]: P7 P6 P5 P4 X11 X10 X9 X8
4460 * ipacket[2]: X7 X6 X5 X4 X3 X2 X1 X0
4461 * ipacket[3]: N4 VF W1 W0 . . . B2
4462 * ipacket[4]: P3 P1 P2 P0 Y11 Y10 Y9 Y8
4463 * ipacket[5]: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
4464 * -------------------------------------------
4465 * N4: set if more than 3 fingers (only in 3 fingers mode)
4466 * VF: a kind of flag? (only on EF123, 0 when finger
4467 * is over one of the buttons, 1 otherwise)
4468 * B2: (on EF113 only, 0 otherwise), one button pressed
4469 * P & W is not reported on EF113 touchpads
4471 nfingers = (pb->ipacket[0] & 0xc0) >> 6;
4472 if (nfingers == 3 && (pb->ipacket[3] & 0x80))
4475 if (nfingers == 0) {
4476 mask = (1 << nfingers) - 1; /* = 0x00 */
4480 /* Map 3-rd and 4-th fingers to first finger */
4481 mask = (1 << 1) - 1; /* = 0x01 */
4482 f[0] = ELANTECH_FINGER_SET_XYP(pb);
4483 if (sc->elanhw.haspressure) {
4484 f[0].w = ((pb->ipacket[0] & 0x30) >> 2) |
4485 ((pb->ipacket[3] & 0x30) >> 4);
4487 f[0].p = PSM_FINGER_DEFAULT_P;
4488 f[0].w = PSM_FINGER_DEFAULT_W;
4492 * HW v2 dont report exact finger positions when 3 or more
4493 * fingers are on touchpad.
4496 f[0].flags = PSM_FINGER_FUZZY;
4500 case ELANTECH_PKT_V2_2FINGER: /*HW V2. Two finger touch */
4501 /* 7 6 5 4 3 2 1 0 (LSB)
4502 * -------------------------------------------
4503 * ipacket[0]: N1 N0 AY8 AX8 . . R L
4504 * ipacket[1]: AX7 AX6 AX5 AX4 AX3 AX2 AX1 AX0
4505 * ipacket[2]: AY7 AY6 AY5 AY4 AY3 AY2 AY1 AY0
4506 * ipacket[3]: . . BY8 BX8 . . . .
4507 * ipacket[4]: BX7 BX6 BX5 BX4 BX3 BX2 BX1 BX0
4508 * ipacket[5]: BY7 BY6 BY5 BY4 BY3 BY2 BY1 BY0
4509 * -------------------------------------------
4510 * AX: lower-left finger absolute x value
4511 * AY: lower-left finger absolute y value
4512 * BX: upper-right finger absolute x value
4513 * BY: upper-right finger absolute y value
4516 mask = (1 << nfingers) - 1;
4518 for (id = 0; id < imin(2, ELANTECH_MAX_FINGERS); id ++)
4519 f[id] = (finger_t) {
4520 .x = (((pb->ipacket[id * 3] & 0x10) << 4) |
4521 pb->ipacket[id * 3 + 1]) << 2,
4522 .y = (((pb->ipacket[id * 3] & 0x20) << 3) |
4523 pb->ipacket[id * 3 + 2]) << 2,
4524 .p = PSM_FINGER_DEFAULT_P,
4525 .w = PSM_FINGER_DEFAULT_W,
4526 /* HW ver.2 sends bounding box */
4527 .flags = PSM_FINGER_FUZZY
4531 case ELANTECH_PKT_V3: /* HW Version 3 */
4532 /* 7 6 5 4 3 2 1 0 (LSB)
4533 * -------------------------------------------
4534 * ipacket[0]: N1 N0 W3 W2 0 1 R L
4535 * ipacket[1]: P7 P6 P5 P4 X11 X10 X9 X8
4536 * ipacket[2]: X7 X6 X5 X4 X3 X2 X1 X0
4537 * ipacket[3]: 0 0 W1 W0 0 0 1 0
4538 * ipacket[4]: P3 P1 P2 P0 Y11 Y10 Y9 Y8
4539 * ipacket[5]: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
4540 * -------------------------------------------
4542 nfingers = (pb->ipacket[0] & 0xc0) >> 6;
4543 /* Map 3-rd finger to first finger */
4544 id = nfingers > 2 ? 0 : nfingers - 1;
4545 mask = (1 << (id + 1)) - 1;
4550 fn = ELANTECH_FINGER_SET_XYP(pb);
4551 fn.w = ((pb->ipacket[0] & 0x30) >> 2) |
4552 ((pb->ipacket[3] & 0x30) >> 4);
4555 * HW v3 dont report exact finger positions when 3 or more
4556 * fingers are on touchpad.
4559 fn.flags = PSM_FINGER_FUZZY;
4561 if (nfingers == 2) {
4562 if (ELANTECH_PKT_IS_V3_HEAD(pb, sc->elanhw.hascrc)) {
4563 sc->elanaction.fingers[0] = fn;
4566 f[0] = sc->elanaction.fingers[0];
4571 case ELANTECH_PKT_V4_STATUS: /* HW Version 4. Status packet */
4572 /* 7 6 5 4 3 2 1 0 (LSB)
4573 * -------------------------------------------
4574 * ipacket[0]: . . . . 0 1 R L
4575 * ipacket[1]: . . . F4 F3 F2 F1 F0
4576 * ipacket[2]: . . . . . . . .
4577 * ipacket[3]: . . . 1 0 0 0 0
4578 * ipacket[4]: PL . . . . . . .
4579 * ipacket[5]: . . . . . . . .
4580 * -------------------------------------------
4581 * Fn: finger n is on touchpad
4583 * HV ver4 sends a status packet to indicate that the numbers
4584 * or identities of the fingers has been changed
4587 mask = pb->ipacket[1] & 0x1f;
4588 nfingers = bitcount(mask);
4590 if (sc->elanaction.mask_v4wait != 0)
4591 VLOG(3, (LOG_DEBUG, "elantech: HW v4 status packet"
4592 " when not all previous head packets received\n"));
4594 /* Bitmap of fingers to receive before gesture processing */
4595 sc->elanaction.mask_v4wait = mask & ~sc->elanaction.mask;
4597 /* Skip "new finger is on touchpad" packets */
4598 if (sc->elanaction.mask_v4wait) {
4599 sc->elanaction.mask = mask;
4605 case ELANTECH_PKT_V4_HEAD: /* HW Version 4. Head packet */
4606 /* 7 6 5 4 3 2 1 0 (LSB)
4607 * -------------------------------------------
4608 * ipacket[0]: W3 W2 W1 W0 0 1 R L
4609 * ipacket[1]: P7 P6 P5 P4 X11 X10 X9 X8
4610 * ipacket[2]: X7 X6 X5 X4 X3 X2 X1 X0
4611 * ipacket[3]: ID2 ID1 ID0 1 0 0 0 1
4612 * ipacket[4]: P3 P1 P2 P0 Y11 Y10 Y9 Y8
4613 * ipacket[5]: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
4614 * -------------------------------------------
4616 * HW ver 4 sends head packets in two cases:
4617 * 1. One finger touch and movement.
4618 * 2. Next after status packet to tell new finger positions.
4620 mask = sc->elanaction.mask;
4621 nfingers = bitcount(mask);
4622 id = ((pb->ipacket[3] & 0xe0) >> 5) - 1;
4623 fn = ELANTECH_FINGER_SET_XYP(pb);
4624 fn.w =(pb->ipacket[0] & 0xf0) >> 4;
4629 /* Packet is finger position update. Report it */
4630 if (sc->elanaction.mask_v4wait == 0) {
4631 if (id < ELANTECH_MAX_FINGERS)
4636 /* Remove finger from waiting bitmap and store into context */
4637 sc->elanaction.mask_v4wait &= ~(1 << id);
4638 if (id < ELANTECH_MAX_FINGERS)
4639 sc->elanaction.fingers[id] = fn;
4641 /* Wait for other fingers if needed */
4642 if (sc->elanaction.mask_v4wait != 0)
4645 /* All new fingers are received. Report them from context */
4646 for (id = 0; id < ELANTECH_MAX_FINGERS; id++)
4647 if (sc->elanaction.mask & (1 << id))
4648 f[id] = sc->elanaction.fingers[id];
4652 case ELANTECH_PKT_V4_MOTION: /* HW Version 4. Motion packet */
4653 /* 7 6 5 4 3 2 1 0 (LSB)
4654 * -------------------------------------------
4655 * ipacket[0]: ID2 ID1 ID0 OF 0 1 R L
4656 * ipacket[1]: DX7 DX6 DX5 DX4 DX3 DX2 DX1 DX0
4657 * ipacket[2]: DY7 DY6 DY5 DY4 DY3 DY2 DY1 DY0
4658 * ipacket[3]: ID2 ID1 ID0 1 0 0 1 0
4659 * ipacket[4]: DX7 DX6 DX5 DX4 DX3 DX2 DX1 DX0
4660 * ipacket[5]: DY7 DY6 DY5 DY4 DY3 DY2 DY1 DY0
4661 * -------------------------------------------
4662 * OF: delta overflows (> 127 or < -128), in this case
4663 * firmware sends us (delta x / 5) and (delta y / 5)
4665 * DX: delta x (two's complement)
4666 * XY: delta y (two's complement)
4667 * byte 0 ~ 2 for one finger
4668 * byte 3 ~ 5 for another finger
4670 mask = sc->elanaction.mask;
4671 nfingers = bitcount(mask);
4673 scale = (pb->ipacket[0] & 0x10) ? 5 : 1;
4674 for (i = 0; i <= 3; i += 3) {
4675 id = ((pb->ipacket[i] & 0xe0) >> 5) - 1;
4676 if (id < 0 || id >= ELANTECH_MAX_FINGERS)
4679 if (PSM_FINGER_IS_SET(sc->elanaction.fingers[id])) {
4680 f[id] = sc->elanaction.fingers[id];
4681 f[id].x += imax(-f[id].x,
4682 (signed char)pb->ipacket[i+1] * scale);
4683 f[id].y += imax(-f[id].y,
4684 (signed char)pb->ipacket[i+2] * scale);
4686 VLOG(3, (LOG_DEBUG, "elantech: "
4687 "HW v4 motion packet skipped\n"));
4693 case ELANTECH_PKT_TRACKPOINT:
4694 /* 7 6 5 4 3 2 1 0 (LSB)
4695 * -------------------------------------------
4696 * ipacket[0]: 0 0 SY SX 0 M R L
4697 * ipacket[1]: ~SX 0 0 0 0 0 0 0
4698 * ipacket[2]: ~SY 0 0 0 0 0 0 0
4699 * ipacket[3]: 0 0 ~SY ~SX 0 1 1 0
4700 * ipacket[4]: X7 X6 X5 X4 X3 X2 X1 X0
4701 * ipacket[5]: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
4702 * -------------------------------------------
4703 * X and Y are written in two's complement spread
4704 * over 9 bits with SX/SY the relative top bit and
4705 * X7..X0 and Y7..Y0 the lower bits.
4707 if (!(pb->ipacket[0] & 0xC8) && !(pb->ipacket[1] & 0x7F) &&
4708 !(pb->ipacket[2] & 0x7F) && !(pb->ipacket[3] & 0xC9) &&
4709 !(pb->ipacket[0] & 0x10) != !(pb->ipacket[1] & 0x80) &&
4710 !(pb->ipacket[0] & 0x10) != !(pb->ipacket[3] & 0x10) &&
4711 !(pb->ipacket[0] & 0x20) != !(pb->ipacket[2] & 0x80) &&
4712 !(pb->ipacket[0] & 0x20) != !(pb->ipacket[3] & 0x20)) {
4714 *x = (pb->ipacket[0] & MOUSE_PS2_XNEG) ?
4715 pb->ipacket[4] - 256 : pb->ipacket[4];
4716 *y = (pb->ipacket[0] & MOUSE_PS2_YNEG) ?
4717 pb->ipacket[5] - 256 : pb->ipacket[5];
4720 ((pb->ipacket[0] & 0x01) ? MOUSE_BUTTON1DOWN : 0) |
4721 ((pb->ipacket[0] & 0x02) ? MOUSE_BUTTON3DOWN : 0) |
4722 ((pb->ipacket[0] & 0x04) ? MOUSE_BUTTON2DOWN : 0);
4723 #ifdef EVDEV_SUPPORT
4724 evdev_push_rel(sc->evdev_r, REL_X, *x);
4725 evdev_push_rel(sc->evdev_r, REL_Y, -*y);
4726 evdev_push_mouse_btn(sc->evdev_r, trackpoint_button);
4727 evdev_sync(sc->evdev_r);
4729 ms->button = touchpad_button | trackpoint_button;
4731 VLOG(3, (LOG_DEBUG, "elantech: "
4732 "unexpected trackpoint packet skipped\n"));
4735 case ELANTECH_PKT_NOP:
4742 for (id = 0; id < ELANTECH_MAX_FINGERS; id++)
4743 if (PSM_FINGER_IS_SET(f[id]))
4744 VLOG(2, (LOG_DEBUG, "elantech: "
4745 "finger %d: down [%d, %d], %d, %d, %d\n", id + 1,
4746 f[id].x, f[id].y, f[id].p, f[id].w, f[id].flags));
4748 /* Touchpad button presses */
4749 if (sc->elanhw.isclickpad) {
4751 ((pb->ipacket[0] & 0x03) ? MOUSE_BUTTON1DOWN : 0);
4754 ((pb->ipacket[0] & 0x01) ? MOUSE_BUTTON1DOWN : 0) |
4755 ((pb->ipacket[0] & 0x02) ? MOUSE_BUTTON3DOWN : 0);
4758 #ifdef EVDEV_SUPPORT
4759 if (evdev_rcpt_mask & EVDEV_RCPT_HW_MOUSE) {
4760 for (id = 0; id < ELANTECH_MAX_FINGERS; id++) {
4761 if (PSM_FINGER_IS_SET(f[id])) {
4762 psm_push_mt_finger(sc, id, &f[id]);
4763 /* Convert touch width to surface units */
4764 evdev_push_abs(sc->evdev_a, ABS_MT_TOUCH_MAJOR,
4765 f[id].w * sc->elanhw.dptracex);
4767 if (sc->elanaction.mask & (1 << id) &&
4768 !(mask & (1 << id)))
4769 psm_release_mt_slot(sc->evdev_a, id);
4771 evdev_push_key(sc->evdev_a, BTN_TOUCH, nfingers > 0);
4772 evdev_push_nfingers(sc->evdev_a, nfingers);
4774 if (PSM_FINGER_IS_SET(f[0]))
4775 psm_push_st_finger(sc, &f[0]);
4777 evdev_push_abs(sc->evdev_a, ABS_PRESSURE, 0);
4778 evdev_push_mouse_btn(sc->evdev_a, touchpad_button);
4779 evdev_sync(sc->evdev_a);
4783 ms->button = touchpad_button | trackpoint_button;
4785 /* Palm detection doesn't terminate the current action. */
4786 palm = psmpalmdetect(sc, &f[0], nfingers);
4788 /* Send finger 1 position to gesture processor */
4789 if ((PSM_FINGER_IS_SET(f[0]) || PSM_FINGER_IS_SET(f[1]) ||
4790 nfingers == 0) && !palm)
4791 psmgestures(sc, &f[0], imin(nfingers, 3), ms);
4793 /* Send fingers positions to movement smoothers */
4794 for (id = 0; id < PSM_FINGERS; id++)
4795 if (PSM_FINGER_IS_SET(f[id]) || !(mask & (1 << id)))
4796 psmsmoother(sc, &f[id], id, ms, x, y);
4798 /* Store current finger positions in action context */
4799 for (id = 0; id < ELANTECH_MAX_FINGERS; id++) {
4800 if (PSM_FINGER_IS_SET(f[id]))
4801 sc->elanaction.fingers[id] = f[id];
4802 if ((sc->elanaction.mask & (1 << id)) && !(mask & (1 << id)))
4803 PSM_FINGER_RESET(sc->elanaction.fingers[id]);
4805 sc->elanaction.mask = mask;
4809 ms->button = ms->obutton;
4813 /* Use the extra buttons as a scrollwheel */
4814 if (ms->button & MOUSE_BUTTON4DOWN)
4816 else if (ms->button & MOUSE_BUTTON5DOWN)
4818 else if (ms->button & MOUSE_BUTTON6DOWN)
4820 else if (ms->button & MOUSE_BUTTON7DOWN)
4824 ms->button &= ~(MOUSE_BUTTON4DOWN | MOUSE_BUTTON5DOWN |
4825 MOUSE_BUTTON6DOWN | MOUSE_BUTTON7DOWN);
4831 proc_versapad(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *ms,
4832 int *x, int *y, int *z)
4834 static int butmap_versapad[8] = {
4840 MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
4842 MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN
4846 /* VersaPad PS/2 absolute mode message format
4848 * [packet1] 7 6 5 4 3 2 1 0(LSB)
4849 * ipacket[0]: 1 1 0 A 1 L T R
4850 * ipacket[1]: H7 H6 H5 H4 H3 H2 H1 H0
4851 * ipacket[2]: V7 V6 V5 V4 V3 V2 V1 V0
4852 * ipacket[3]: 1 1 1 A 1 L T R
4853 * ipacket[4]:V11 V10 V9 V8 H11 H10 H9 H8
4854 * ipacket[5]: 0 P6 P5 P4 P3 P2 P1 P0
4857 * R: right physical mouse button (1=on)
4858 * T: touch pad virtual button (1=tapping)
4859 * L: left physical mouse button (1=on)
4860 * A: position data is valid (1=valid)
4861 * H: horizontal data (12bit signed integer. H11 is sign bit.)
4862 * V: vertical data (12bit signed integer. V11 is sign bit.)
4865 * Tapping is mapped to MOUSE_BUTTON4.
4869 ms->button = butmap_versapad[c & MOUSE_PS2VERSA_BUTTONS];
4870 ms->button |= (c & MOUSE_PS2VERSA_TAP) ? MOUSE_BUTTON4DOWN : 0;
4871 if (c & MOUSE_PS2VERSA_IN_USE) {
4872 x0 = pb->ipacket[1] | (((pb->ipacket[4]) & 0x0f) << 8);
4873 y0 = pb->ipacket[2] | (((pb->ipacket[4]) & 0xf0) << 4);
4878 if (sc->flags & PSM_FLAGS_FINGERDOWN) {
4881 if (*x < 0) /* XXX */
4890 sc->flags |= PSM_FLAGS_FINGERDOWN;
4894 sc->flags &= ~PSM_FLAGS_FINGERDOWN;
4898 psmsoftintridle(void *arg)
4900 struct psm_softc *sc = arg;
4903 /* Invoke soft handler only when pqueue is empty. Otherwise it will be
4904 * invoked from psmintr soon with pqueue filled with real data */
4905 if (sc->pqueue_start == sc->pqueue_end &&
4906 sc->idlepacket.inputbytes > 0) {
4907 /* Grow circular queue backwards to avoid race with psmintr */
4908 if (--sc->pqueue_start < 0)
4909 sc->pqueue_start = PSM_PACKETQUEUE - 1;
4911 pb = &sc->pqueue[sc->pqueue_start];
4912 memcpy(pb, &sc->idlepacket, sizeof(packetbuf_t));
4914 "psmsoftintridle: %02x %02x %02x %02x %02x %02x\n",
4915 pb->ipacket[0], pb->ipacket[1], pb->ipacket[2],
4916 pb->ipacket[3], pb->ipacket[4], pb->ipacket[5]));
4923 psmsoftintr(void *arg)
4926 * the table to turn PS/2 mouse button bits (MOUSE_PS2_BUTTON?DOWN)
4927 * into `mousestatus' button bits (MOUSE_BUTTON?DOWN).
4929 static int butmap[8] = {
4933 MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
4935 MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN,
4936 MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN,
4937 MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN
4939 struct psm_softc *sc = arg;
4942 int x, y, z, c, l, s;
4944 getmicrouptime(&sc->lastsoftintr);
4949 pb = &sc->pqueue[sc->pqueue_start];
4951 if (sc->mode.level == PSM_LEVEL_NATIVE)
4956 * A kludge for Kensington device!
4957 * The MSB of the horizontal count appears to be stored in
4960 if (sc->hw.model == MOUSE_MODEL_THINK)
4961 pb->ipacket[1] |= (c & MOUSE_PS2_XOVERFLOW) ? 0x80 : 0;
4963 /* ignore the overflow bits... */
4964 x = (c & MOUSE_PS2_XNEG) ?
4965 pb->ipacket[1] - 256 : pb->ipacket[1];
4966 y = (c & MOUSE_PS2_YNEG) ?
4967 pb->ipacket[2] - 256 : pb->ipacket[2];
4969 ms.obutton = sc->button; /* previous button state */
4970 ms.button = butmap[c & MOUSE_PS2_BUTTONS];
4971 /* `tapping' action */
4972 if (sc->config & PSM_CONFIG_FORCETAP)
4973 ms.button |= ((c & MOUSE_PS2_TAP)) ?
4974 0 : MOUSE_BUTTON4DOWN;
4975 timevalclear(&sc->idletimeout);
4976 sc->idlepacket.inputbytes = 0;
4978 switch (sc->hw.model) {
4980 case MOUSE_MODEL_EXPLORER:
4982 * b7 b6 b5 b4 b3 b2 b1 b0
4983 * byte 1: oy ox sy sx 1 M R L
4984 * byte 2: x x x x x x x x
4985 * byte 3: y y y y y y y y
4986 * byte 4: * * S2 S1 s d2 d1 d0
4988 * L, M, R, S1, S2: left, middle, right and side buttons
4989 * s: wheel data sign bit
4992 z = (pb->ipacket[3] & MOUSE_EXPLORER_ZNEG) ?
4993 (pb->ipacket[3] & 0x0f) - 16 :
4994 (pb->ipacket[3] & 0x0f);
4996 (pb->ipacket[3] & MOUSE_EXPLORER_BUTTON4DOWN) ?
4997 MOUSE_BUTTON4DOWN : 0;
4999 (pb->ipacket[3] & MOUSE_EXPLORER_BUTTON5DOWN) ?
5000 MOUSE_BUTTON5DOWN : 0;
5003 case MOUSE_MODEL_INTELLI:
5004 case MOUSE_MODEL_NET:
5005 /* wheel data is in the fourth byte */
5006 z = (char)pb->ipacket[3];
5008 * XXX some mice may send 7 when there is no Z movement? */
5009 if ((z >= 7) || (z <= -7))
5011 /* some compatible mice have additional buttons */
5012 ms.button |= (c & MOUSE_PS2INTELLI_BUTTON4DOWN) ?
5013 MOUSE_BUTTON4DOWN : 0;
5014 ms.button |= (c & MOUSE_PS2INTELLI_BUTTON5DOWN) ?
5015 MOUSE_BUTTON5DOWN : 0;
5018 case MOUSE_MODEL_MOUSEMANPLUS:
5019 proc_mmanplus(sc, pb, &ms, &x, &y, &z);
5022 case MOUSE_MODEL_GLIDEPOINT:
5023 /* `tapping' action */
5024 ms.button |= ((c & MOUSE_PS2_TAP)) ? 0 :
5028 case MOUSE_MODEL_NETSCROLL:
5030 * three additional bytes encode buttons and
5033 ms.button |= (pb->ipacket[3] & MOUSE_PS2_BUTTON3DOWN) ?
5034 MOUSE_BUTTON4DOWN : 0;
5035 ms.button |= (pb->ipacket[3] & MOUSE_PS2_BUTTON1DOWN) ?
5036 MOUSE_BUTTON5DOWN : 0;
5037 z = (pb->ipacket[3] & MOUSE_PS2_XNEG) ?
5038 pb->ipacket[4] - 256 : pb->ipacket[4];
5041 case MOUSE_MODEL_THINK:
5042 /* the fourth button state in the first byte */
5043 ms.button |= (c & MOUSE_PS2_TAP) ?
5044 MOUSE_BUTTON4DOWN : 0;
5047 case MOUSE_MODEL_VERSAPAD:
5048 proc_versapad(sc, pb, &ms, &x, &y, &z);
5049 c = ((x < 0) ? MOUSE_PS2_XNEG : 0) |
5050 ((y < 0) ? MOUSE_PS2_YNEG : 0);
5053 case MOUSE_MODEL_4D:
5055 * b7 b6 b5 b4 b3 b2 b1 b0
5056 * byte 1: s2 d2 s1 d1 1 M R L
5057 * byte 2: sx x x x x x x x
5058 * byte 3: sy y y y y y y y
5060 * s1: wheel 1 direction
5062 * s2: wheel 2 direction
5065 x = (pb->ipacket[1] & 0x80) ?
5066 pb->ipacket[1] - 256 : pb->ipacket[1];
5067 y = (pb->ipacket[2] & 0x80) ?
5068 pb->ipacket[2] - 256 : pb->ipacket[2];
5069 switch (c & MOUSE_4D_WHEELBITS) {
5076 case 0x40: /* XXX 2nd wheel turning right */
5079 case 0xc0: /* XXX 2nd wheel turning left */
5085 case MOUSE_MODEL_4DPLUS:
5086 if ((x < 16 - 256) && (y < 16 - 256)) {
5088 * b7 b6 b5 b4 b3 b2 b1 b0
5089 * byte 1: 0 0 1 1 1 M R L
5090 * byte 2: 0 0 0 0 1 0 0 0
5091 * byte 3: 0 0 0 0 S s d1 d0
5093 * L, M, R, S: left, middle, right,
5095 * s: wheel data sign bit
5099 if (pb->ipacket[2] & MOUSE_4DPLUS_BUTTON4DOWN)
5100 ms.button |= MOUSE_BUTTON4DOWN;
5101 z = (pb->ipacket[2] & MOUSE_4DPLUS_ZNEG) ?
5102 ((pb->ipacket[2] & 0x07) - 8) :
5103 (pb->ipacket[2] & 0x07) ;
5105 /* preserve previous button states */
5106 ms.button |= ms.obutton & MOUSE_EXTBUTTONS;
5110 case MOUSE_MODEL_SYNAPTICS:
5111 if (pb->inputbytes == MOUSE_PS2_PACKETSIZE)
5112 if (proc_synaptics_mux(sc, pb))
5115 if (proc_synaptics(sc, pb, &ms, &x, &y, &z) != 0) {
5116 VLOG(3, (LOG_DEBUG, "synaptics: "
5117 "packet rejected\n"));
5122 case MOUSE_MODEL_ELANTECH:
5123 if (proc_elantech(sc, pb, &ms, &x, &y, &z) != 0) {
5124 VLOG(3, (LOG_DEBUG, "elantech: "
5125 "packet rejected\n"));
5130 case MOUSE_MODEL_TRACKPOINT:
5131 case MOUSE_MODEL_GENERIC:
5136 #ifdef EVDEV_SUPPORT
5137 if (evdev_rcpt_mask & EVDEV_RCPT_HW_MOUSE &&
5138 sc->hw.model != MOUSE_MODEL_ELANTECH &&
5139 sc->hw.model != MOUSE_MODEL_SYNAPTICS) {
5140 evdev_push_rel(sc->evdev_r, REL_X, x);
5141 evdev_push_rel(sc->evdev_r, REL_Y, -y);
5143 switch (sc->hw.model) {
5144 case MOUSE_MODEL_EXPLORER:
5145 case MOUSE_MODEL_INTELLI:
5146 case MOUSE_MODEL_NET:
5147 case MOUSE_MODEL_NETSCROLL:
5148 case MOUSE_MODEL_4DPLUS:
5149 evdev_push_rel(sc->evdev_r, REL_WHEEL, -z);
5151 case MOUSE_MODEL_MOUSEMANPLUS:
5152 case MOUSE_MODEL_4D:
5156 evdev_push_rel(sc->evdev_r, REL_WHEEL, -z);
5160 evdev_push_rel(sc->evdev_r, REL_HWHEEL, z / 2);
5166 evdev_push_mouse_btn(sc->evdev_r, ms.button);
5167 evdev_sync(sc->evdev_r);
5172 if (sc->mode.accelfactor >= 1) {
5174 x = x * x / sc->mode.accelfactor;
5177 if (c & MOUSE_PS2_XNEG)
5181 y = y * y / sc->mode.accelfactor;
5184 if (c & MOUSE_PS2_YNEG)
5189 /* Store last packet for reinjection if it has not been set already */
5190 if (timevalisset(&sc->idletimeout) && sc->idlepacket.inputbytes == 0)
5191 sc->idlepacket = *pb;
5196 ms.flags = ((x || y || z) ? MOUSE_POSCHANGED : 0) |
5197 (ms.obutton ^ ms.button);
5199 pb->inputbytes = tame_mouse(sc, pb, &ms, pb->ipacket);
5201 sc->status.flags |= ms.flags;
5202 sc->status.dx += ms.dx;
5203 sc->status.dy += ms.dy;
5204 sc->status.dz += ms.dz;
5205 sc->status.button = ms.button;
5206 sc->button = ms.button;
5209 sc->watchdog = FALSE;
5212 if (sc->queue.count + pb->inputbytes < sizeof(sc->queue.buf)) {
5213 l = imin(pb->inputbytes,
5214 sizeof(sc->queue.buf) - sc->queue.tail);
5215 bcopy(&pb->ipacket[0], &sc->queue.buf[sc->queue.tail], l);
5216 if (pb->inputbytes > l)
5217 bcopy(&pb->ipacket[l], &sc->queue.buf[0],
5218 pb->inputbytes - l);
5219 sc->queue.tail = (sc->queue.tail + pb->inputbytes) %
5220 sizeof(sc->queue.buf);
5221 sc->queue.count += pb->inputbytes;
5226 if (++sc->pqueue_start >= PSM_PACKETQUEUE)
5227 sc->pqueue_start = 0;
5228 } while (sc->pqueue_start != sc->pqueue_end);
5230 if (sc->state & PSM_ASLP) {
5231 sc->state &= ~PSM_ASLP;
5234 selwakeuppri(&sc->rsel, PZERO);
5235 if (sc->async != NULL) {
5236 pgsigio(&sc->async, SIGIO, 0);
5238 sc->state &= ~PSM_SOFTARMED;
5240 /* schedule injection of predefined packet after idletimeout
5241 * if no data packets have been received from psmintr */
5242 if (timevalisset(&sc->idletimeout)) {
5243 sc->state |= PSM_SOFTARMED;
5244 callout_reset(&sc->softcallout, tvtohz(&sc->idletimeout),
5245 psmsoftintridle, sc);
5246 VLOG(2, (LOG_DEBUG, "softintr: callout set: %d ticks\n",
5247 tvtohz(&sc->idletimeout)));
5253 psmpoll(struct cdev *dev, int events, struct thread *td)
5255 struct psm_softc *sc = dev->si_drv1;
5259 /* Return true if a mouse event available */
5261 if (events & (POLLIN | POLLRDNORM)) {
5262 if (sc->queue.count > 0)
5263 revents |= events & (POLLIN | POLLRDNORM);
5265 selrecord(td, &sc->rsel);
5272 /* vendor/model specific routines */
5274 static int mouse_id_proc1(KBDC kbdc, int res, int scale, int *status)
5276 if (set_mouse_resolution(kbdc, res) != res)
5278 if (set_mouse_scaling(kbdc, scale) &&
5279 set_mouse_scaling(kbdc, scale) &&
5280 set_mouse_scaling(kbdc, scale) &&
5281 (get_mouse_status(kbdc, status, 0, 3) >= 3))
5287 mouse_ext_command(KBDC kbdc, int command)
5291 c = (command >> 6) & 0x03;
5292 if (set_mouse_resolution(kbdc, c) != c)
5294 c = (command >> 4) & 0x03;
5295 if (set_mouse_resolution(kbdc, c) != c)
5297 c = (command >> 2) & 0x03;
5298 if (set_mouse_resolution(kbdc, c) != c)
5300 c = (command >> 0) & 0x03;
5301 if (set_mouse_resolution(kbdc, c) != c)
5307 /* Logitech MouseMan Cordless II */
5309 enable_lcordless(struct psm_softc *sc, enum probearg arg)
5311 KBDC kbdc = sc->kbdc;
5315 if (!mouse_id_proc1(kbdc, PSMD_RES_HIGH, 2, status))
5317 if (status[1] == PSMD_RES_HIGH)
5319 ch = (status[0] & 0x07) - 1; /* channel # */
5320 if ((ch <= 0) || (ch > 4))
5323 * status[1]: always one?
5324 * status[2]: battery status? (0-100)
5330 /* Genius NetScroll Mouse, MouseSystems SmartScroll Mouse */
5332 enable_groller(struct psm_softc *sc, enum probearg arg)
5334 KBDC kbdc = sc->kbdc;
5338 * The special sequence to enable the fourth button and the
5339 * roller. Immediately after this sequence check status bytes.
5340 * if the mouse is NetScroll, the second and the third bytes are
5345 * If the mouse is an ordinary PS/2 mouse, the status bytes should
5346 * look like the following.
5348 * byte 1 bit 7 always 0
5349 * bit 6 stream mode (0)
5350 * bit 5 disabled (0)
5351 * bit 4 1:1 scaling (0)
5353 * bit 0-2 button status
5354 * byte 2 resolution (PSMD_RES_HIGH)
5355 * byte 3 report rate (?)
5358 if (!mouse_id_proc1(kbdc, PSMD_RES_HIGH, 1, status))
5360 if ((status[1] != '3') || (status[2] != 'D'))
5362 /* FIXME: SmartScroll Mouse has 5 buttons! XXX */
5368 /* Genius NetMouse/NetMouse Pro, ASCII Mie Mouse, NetScroll Optical */
5370 enable_gmouse(struct psm_softc *sc, enum probearg arg)
5372 KBDC kbdc = sc->kbdc;
5376 * The special sequence to enable the middle, "rubber" button.
5377 * Immediately after this sequence check status bytes.
5378 * if the mouse is NetMouse, NetMouse Pro, or ASCII MIE Mouse,
5379 * the second and the third bytes are '3' and 'U'.
5380 * NOTE: NetMouse reports that it has three buttons although it has
5381 * two buttons and a rubber button. NetMouse Pro and MIE Mouse
5382 * say they have three buttons too and they do have a button on the
5385 if (!mouse_id_proc1(kbdc, PSMD_RES_HIGH, 1, status))
5387 if ((status[1] != '3') || (status[2] != 'U'))
5392 /* ALPS GlidePoint */
5394 enable_aglide(struct psm_softc *sc, enum probearg arg)
5396 KBDC kbdc = sc->kbdc;
5400 * The special sequence to obtain ALPS GlidePoint specific
5401 * information. Immediately after this sequence, status bytes will
5402 * contain something interesting.
5403 * NOTE: ALPS produces several models of GlidePoint. Some of those
5404 * do not respond to this sequence, thus, cannot be detected this way.
5406 if (set_mouse_sampling_rate(kbdc, 100) != 100)
5408 if (!mouse_id_proc1(kbdc, PSMD_RES_LOW, 2, status))
5410 if ((status[1] == PSMD_RES_LOW) || (status[2] == 100))
5415 /* Kensington ThinkingMouse/Trackball */
5417 enable_kmouse(struct psm_softc *sc, enum probearg arg)
5419 static u_char rate[] = { 20, 60, 40, 20, 20, 60, 40, 20, 20 };
5420 KBDC kbdc = sc->kbdc;
5426 id1 = get_aux_id(kbdc);
5427 if (set_mouse_sampling_rate(kbdc, 10) != 10)
5430 * The device is now in the native mode? It returns a different
5433 id2 = get_aux_id(kbdc);
5434 if ((id1 == id2) || (id2 != 2))
5437 if (set_mouse_resolution(kbdc, PSMD_RES_LOW) != PSMD_RES_LOW)
5440 /* at this point, resolution is LOW, sampling rate is 10/sec */
5441 if (get_mouse_status(kbdc, status, 0, 3) < 3)
5446 * The special sequence to enable the third and fourth buttons.
5447 * Otherwise they behave like the first and second buttons.
5449 for (i = 0; i < nitems(rate); ++i)
5450 if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i])
5454 * At this point, the device is using default resolution and
5455 * sampling rate for the native mode.
5457 if (get_mouse_status(kbdc, status, 0, 3) < 3)
5459 if ((status[1] == PSMD_RES_LOW) || (status[2] == rate[i - 1]))
5462 /* the device appears be enabled by this sequence, diable it for now */
5463 disable_aux_dev(kbdc);
5464 empty_aux_buffer(kbdc, 5);
5469 /* Logitech MouseMan+/FirstMouse+, IBM ScrollPoint Mouse */
5471 enable_mmanplus(struct psm_softc *sc, enum probearg arg)
5473 KBDC kbdc = sc->kbdc;
5476 /* the special sequence to enable the fourth button and the roller. */
5478 * NOTE: for ScrollPoint to respond correctly, the SET_RESOLUTION
5479 * must be called exactly three times since the last RESET command
5480 * before this sequence. XXX
5482 if (!set_mouse_scaling(kbdc, 1))
5484 if (!mouse_ext_command(kbdc, 0x39) || !mouse_ext_command(kbdc, 0xdb))
5486 if (get_mouse_status(kbdc, data, 1, 3) < 3)
5490 * PS2++ protocol, packet type 0
5492 * b7 b6 b5 b4 b3 b2 b1 b0
5493 * byte 1: * 1 p3 p2 1 * * *
5494 * byte 2: 1 1 p1 p0 m1 m0 1 0
5495 * byte 3: m7 m6 m5 m4 m3 m2 m1 m0
5497 * p3-p0: packet type: 0
5498 * m7-m0: model ID: MouseMan+:0x50,
5500 * ScrollPoint:0x58...
5502 /* check constant bits */
5503 if ((data[0] & MOUSE_PS2PLUS_SYNCMASK) != MOUSE_PS2PLUS_SYNC)
5505 if ((data[1] & 0xc3) != 0xc2)
5507 /* check d3-d0 in byte 2 */
5508 if (!MOUSE_PS2PLUS_CHECKBITS(data))
5511 if (MOUSE_PS2PLUS_PACKET_TYPE(data) != 0)
5515 sc->hw.hwid &= 0x00ff;
5516 sc->hw.hwid |= data[2] << 8; /* save model ID */
5520 * MouseMan+ (or FirstMouse+) is now in its native mode, in which
5521 * the wheel and the fourth button events are encoded in the
5522 * special data packet. The mouse may be put in the IntelliMouse mode
5523 * if it is initialized by the IntelliMouse's method.
5528 /* MS IntelliMouse Explorer */
5530 enable_msexplorer(struct psm_softc *sc, enum probearg arg)
5532 KBDC kbdc = sc->kbdc;
5533 static u_char rate0[] = { 200, 100, 80, };
5534 static u_char rate1[] = { 200, 200, 80, };
5539 * This is needed for at least A4Tech X-7xx mice - they do not go
5540 * straight to Explorer mode, but need to be set to Intelli mode
5543 enable_msintelli(sc, arg);
5545 /* the special sequence to enable the extra buttons and the roller. */
5546 for (i = 0; i < nitems(rate1); ++i)
5547 if (set_mouse_sampling_rate(kbdc, rate1[i]) != rate1[i])
5549 /* the device will give the genuine ID only after the above sequence */
5550 id = get_aux_id(kbdc);
5551 if (id != PSM_EXPLORER_ID)
5555 sc->hw.buttons = 5; /* IntelliMouse Explorer XXX */
5560 * XXX: this is a kludge to fool some KVM switch products
5561 * which think they are clever enough to know the 4-byte IntelliMouse
5562 * protocol, and assume any other protocols use 3-byte packets.
5563 * They don't convey 4-byte data packets from the IntelliMouse Explorer
5564 * correctly to the host computer because of this!
5565 * The following sequence is actually IntelliMouse's "wake up"
5566 * sequence; it will make the KVM think the mouse is IntelliMouse
5567 * when it is in fact IntelliMouse Explorer.
5569 for (i = 0; i < nitems(rate0); ++i)
5570 if (set_mouse_sampling_rate(kbdc, rate0[i]) != rate0[i])
5579 * Logitech MouseMan+ and FirstMouse+ will also respond to this
5580 * probe routine and act like IntelliMouse.
5583 enable_msintelli(struct psm_softc *sc, enum probearg arg)
5585 KBDC kbdc = sc->kbdc;
5586 static u_char rate[] = { 200, 100, 80, };
5590 /* the special sequence to enable the third button and the roller. */
5591 for (i = 0; i < nitems(rate); ++i)
5592 if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i])
5594 /* the device will give the genuine ID only after the above sequence */
5595 id = get_aux_id(kbdc);
5596 if (id != PSM_INTELLI_ID)
5609 * Newer wheel mice from A4 Tech may use the 4D+ protocol.
5612 enable_4dmouse(struct psm_softc *sc, enum probearg arg)
5614 static u_char rate[] = { 200, 100, 80, 60, 40, 20 };
5615 KBDC kbdc = sc->kbdc;
5619 for (i = 0; i < nitems(rate); ++i)
5620 if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i])
5622 id = get_aux_id(kbdc);
5624 * WinEasy 4D, 4 Way Scroll 4D: 6
5625 * Cable-Free 4D: 8 (4DPLUS)
5626 * WinBest 4D+, 4 Way Scroll 4D+: 8 (4DPLUS)
5628 if (id != PSM_4DMOUSE_ID)
5632 sc->hw.buttons = 3; /* XXX some 4D mice have 4? */
5641 * Newer wheel mice from A4 Tech seem to use this protocol.
5642 * Older models are recognized as either 4D Mouse or IntelliMouse.
5645 enable_4dplus(struct psm_softc *sc, enum probearg arg)
5647 KBDC kbdc = sc->kbdc;
5651 * enable_4dmouse() already issued the following ID sequence...
5652 static u_char rate[] = { 200, 100, 80, 60, 40, 20 };
5655 for (i = 0; i < sizeof(rate)/sizeof(rate[0]); ++i)
5656 if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i])
5660 id = get_aux_id(kbdc);
5664 case PSM_4DPLUS_RFSW35_ID:
5671 sc->hw.buttons = (id == PSM_4DPLUS_ID) ? 4 : 3;
5678 /* Synaptics Touchpad */
5680 synaptics_sysctl(SYSCTL_HANDLER_ARGS)
5682 struct psm_softc *sc;
5685 if (oidp->oid_arg1 == NULL || oidp->oid_arg2 < 0 ||
5686 oidp->oid_arg2 > SYNAPTICS_SYSCTL_LAST)
5689 sc = oidp->oid_arg1;
5691 /* Read the current value. */
5692 arg = *(int *)((char *)sc + oidp->oid_arg2);
5693 error = sysctl_handle_int(oidp, &arg, 0, req);
5696 if (error || !req->newptr)
5700 * Check that the new value is in the concerned node's range
5703 switch (oidp->oid_arg2) {
5704 case SYNAPTICS_SYSCTL_MIN_PRESSURE:
5705 case SYNAPTICS_SYSCTL_MAX_PRESSURE:
5706 if (arg < 0 || arg > 255)
5709 case SYNAPTICS_SYSCTL_MAX_WIDTH:
5710 if (arg < 4 || arg > 15)
5713 case SYNAPTICS_SYSCTL_MARGIN_TOP:
5714 case SYNAPTICS_SYSCTL_MARGIN_BOTTOM:
5715 case SYNAPTICS_SYSCTL_NA_TOP:
5716 case SYNAPTICS_SYSCTL_NA_BOTTOM:
5717 if (arg < 0 || arg > sc->synhw.maximumYCoord)
5720 case SYNAPTICS_SYSCTL_SOFTBUTTON2_X:
5721 case SYNAPTICS_SYSCTL_SOFTBUTTON3_X:
5722 /* Softbuttons is clickpad only feature */
5723 if (!sc->synhw.capClickPad && arg != 0)
5726 case SYNAPTICS_SYSCTL_MARGIN_RIGHT:
5727 case SYNAPTICS_SYSCTL_MARGIN_LEFT:
5728 case SYNAPTICS_SYSCTL_NA_RIGHT:
5729 case SYNAPTICS_SYSCTL_NA_LEFT:
5730 if (arg < 0 || arg > sc->synhw.maximumXCoord)
5733 case SYNAPTICS_SYSCTL_WINDOW_MIN:
5734 case SYNAPTICS_SYSCTL_WINDOW_MAX:
5735 case SYNAPTICS_SYSCTL_TAP_MIN_QUEUE:
5736 if (arg < 1 || arg > SYNAPTICS_PACKETQUEUE)
5739 case SYNAPTICS_SYSCTL_MULTIPLICATOR:
5740 case SYNAPTICS_SYSCTL_WEIGHT_CURRENT:
5741 case SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS:
5742 case SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS_NA:
5743 case SYNAPTICS_SYSCTL_WEIGHT_LEN_SQUARED:
5744 case SYNAPTICS_SYSCTL_DIV_MIN:
5745 case SYNAPTICS_SYSCTL_DIV_MAX:
5746 case SYNAPTICS_SYSCTL_DIV_MAX_NA:
5747 case SYNAPTICS_SYSCTL_DIV_LEN:
5748 case SYNAPTICS_SYSCTL_VSCROLL_DIV_MIN:
5749 case SYNAPTICS_SYSCTL_VSCROLL_DIV_MAX:
5753 case SYNAPTICS_SYSCTL_TAP_MAX_DELTA:
5754 case SYNAPTICS_SYSCTL_TAPHOLD_TIMEOUT:
5755 case SYNAPTICS_SYSCTL_VSCROLL_MIN_DELTA:
5759 case SYNAPTICS_SYSCTL_VSCROLL_HOR_AREA:
5760 if (arg < -sc->synhw.maximumXCoord ||
5761 arg > sc->synhw.maximumXCoord)
5764 case SYNAPTICS_SYSCTL_SOFTBUTTONS_Y:
5765 /* Softbuttons is clickpad only feature */
5766 if (!sc->synhw.capClickPad && arg != 0)
5769 case SYNAPTICS_SYSCTL_VSCROLL_VER_AREA:
5770 if (arg < -sc->synhw.maximumYCoord ||
5771 arg > sc->synhw.maximumYCoord)
5774 case SYNAPTICS_SYSCTL_TOUCHPAD_OFF:
5775 case SYNAPTICS_SYSCTL_THREE_FINGER_DRAG:
5776 case SYNAPTICS_SYSCTL_NATURAL_SCROLL:
5777 if (arg < 0 || arg > 1)
5785 *(int *)((char *)sc + oidp->oid_arg2) = arg;
5791 synaptics_sysctl_create_softbuttons_tree(struct psm_softc *sc)
5794 * Set predefined sizes for softbuttons.
5795 * Values are taken to match HP Pavilion dv6 clickpad drawings
5796 * with thin middle softbutton placed on separator
5799 /* hw.psm.synaptics.softbuttons_y */
5800 sc->syninfo.softbuttons_y = sc->synhw.topButtonPad ? -1700 : 1700;
5801 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
5802 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
5803 "softbuttons_y", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
5804 sc, SYNAPTICS_SYSCTL_SOFTBUTTONS_Y,
5805 synaptics_sysctl, "I",
5806 "Vertical size of softbuttons area");
5808 /* hw.psm.synaptics.softbutton2_x */
5809 sc->syninfo.softbutton2_x = 3100;
5810 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
5811 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
5812 "softbutton2_x", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
5813 sc, SYNAPTICS_SYSCTL_SOFTBUTTON2_X,
5814 synaptics_sysctl, "I",
5815 "Horisontal position of 2-nd softbutton left edge (0-disable)");
5817 /* hw.psm.synaptics.softbutton3_x */
5818 sc->syninfo.softbutton3_x = 3900;
5819 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
5820 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
5821 "softbutton3_x", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
5822 sc, SYNAPTICS_SYSCTL_SOFTBUTTON3_X,
5823 synaptics_sysctl, "I",
5824 "Horisontal position of 3-rd softbutton left edge (0-disable)");
5828 synaptics_sysctl_create_tree(struct psm_softc *sc, const char *name,
5832 if (sc->syninfo.sysctl_tree != NULL)
5835 /* Attach extra synaptics sysctl nodes under hw.psm.synaptics */
5836 sysctl_ctx_init(&sc->syninfo.sysctl_ctx);
5837 sc->syninfo.sysctl_tree = SYSCTL_ADD_NODE(&sc->syninfo.sysctl_ctx,
5838 SYSCTL_STATIC_CHILDREN(_hw_psm), OID_AUTO, name, CTLFLAG_RD,
5841 /* hw.psm.synaptics.directional_scrolls. */
5842 sc->syninfo.directional_scrolls = 0;
5843 SYSCTL_ADD_INT(&sc->syninfo.sysctl_ctx,
5844 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
5845 "directional_scrolls", CTLFLAG_RW|CTLFLAG_ANYBODY,
5846 &sc->syninfo.directional_scrolls, 0,
5847 "Enable hardware scrolling pad (if non-zero) or register it as "
5848 "extended buttons (if 0)");
5850 /* hw.psm.synaptics.max_x. */
5851 sc->syninfo.max_x = 6143;
5852 SYSCTL_ADD_INT(&sc->syninfo.sysctl_ctx,
5853 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
5854 "max_x", CTLFLAG_RD|CTLFLAG_ANYBODY,
5855 &sc->syninfo.max_x, 0,
5856 "Horizontal reporting range");
5858 /* hw.psm.synaptics.max_y. */
5859 sc->syninfo.max_y = 6143;
5860 SYSCTL_ADD_INT(&sc->syninfo.sysctl_ctx,
5861 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
5862 "max_y", CTLFLAG_RD|CTLFLAG_ANYBODY,
5863 &sc->syninfo.max_y, 0,
5864 "Vertical reporting range");
5867 * Turn off two finger scroll if we have a
5868 * physical area reserved for scrolling or when
5869 * there's no multi finger support.
5871 if (sc->synhw.verticalScroll || (sc->synhw.capMultiFinger == 0 &&
5872 sc->synhw.capAdvancedGestures == 0))
5873 sc->syninfo.two_finger_scroll = 0;
5875 sc->syninfo.two_finger_scroll = 1;
5876 /* hw.psm.synaptics.two_finger_scroll. */
5877 SYSCTL_ADD_INT(&sc->syninfo.sysctl_ctx,
5878 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
5879 "two_finger_scroll", CTLFLAG_RW|CTLFLAG_ANYBODY,
5880 &sc->syninfo.two_finger_scroll, 0,
5881 "Enable two finger scrolling");
5883 /* hw.psm.synaptics.min_pressure. */
5884 sc->syninfo.min_pressure = 32;
5885 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
5886 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
5887 "min_pressure", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
5888 sc, SYNAPTICS_SYSCTL_MIN_PRESSURE,
5889 synaptics_sysctl, "I",
5890 "Minimum pressure required to start an action");
5892 /* hw.psm.synaptics.max_pressure. */
5893 sc->syninfo.max_pressure = 220;
5894 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
5895 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
5896 "max_pressure", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
5897 sc, SYNAPTICS_SYSCTL_MAX_PRESSURE,
5898 synaptics_sysctl, "I",
5899 "Maximum pressure to detect palm");
5901 /* hw.psm.synaptics.max_width. */
5902 sc->syninfo.max_width = 10;
5903 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
5904 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
5905 "max_width", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
5906 sc, SYNAPTICS_SYSCTL_MAX_WIDTH,
5907 synaptics_sysctl, "I",
5908 "Maximum finger width to detect palm");
5910 /* hw.psm.synaptics.top_margin. */
5911 sc->syninfo.margin_top = 200;
5912 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
5913 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
5914 "margin_top", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
5915 sc, SYNAPTICS_SYSCTL_MARGIN_TOP,
5916 synaptics_sysctl, "I",
5919 /* hw.psm.synaptics.right_margin. */
5920 sc->syninfo.margin_right = 200;
5921 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
5922 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
5923 "margin_right", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
5924 sc, SYNAPTICS_SYSCTL_MARGIN_RIGHT,
5925 synaptics_sysctl, "I",
5928 /* hw.psm.synaptics.bottom_margin. */
5929 sc->syninfo.margin_bottom = 200;
5930 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
5931 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
5932 "margin_bottom", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
5933 sc, SYNAPTICS_SYSCTL_MARGIN_BOTTOM,
5934 synaptics_sysctl, "I",
5937 /* hw.psm.synaptics.left_margin. */
5938 sc->syninfo.margin_left = 200;
5939 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
5940 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
5941 "margin_left", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
5942 sc, SYNAPTICS_SYSCTL_MARGIN_LEFT,
5943 synaptics_sysctl, "I",
5946 /* hw.psm.synaptics.na_top. */
5947 sc->syninfo.na_top = 1783;
5948 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
5949 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
5950 "na_top", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
5951 sc, SYNAPTICS_SYSCTL_NA_TOP,
5952 synaptics_sysctl, "I",
5953 "Top noisy area, where weight_previous_na is used instead "
5954 "of weight_previous");
5956 /* hw.psm.synaptics.na_right. */
5957 sc->syninfo.na_right = 563;
5958 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
5959 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
5960 "na_right", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
5961 sc, SYNAPTICS_SYSCTL_NA_RIGHT,
5962 synaptics_sysctl, "I",
5963 "Right noisy area, where weight_previous_na is used instead "
5964 "of weight_previous");
5966 /* hw.psm.synaptics.na_bottom. */
5967 sc->syninfo.na_bottom = 1408;
5968 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
5969 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
5970 "na_bottom", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
5971 sc, SYNAPTICS_SYSCTL_NA_BOTTOM,
5972 synaptics_sysctl, "I",
5973 "Bottom noisy area, where weight_previous_na is used instead "
5974 "of weight_previous");
5976 /* hw.psm.synaptics.na_left. */
5977 sc->syninfo.na_left = 1600;
5978 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
5979 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
5980 "na_left", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
5981 sc, SYNAPTICS_SYSCTL_NA_LEFT,
5982 synaptics_sysctl, "I",
5983 "Left noisy area, where weight_previous_na is used instead "
5984 "of weight_previous");
5986 /* hw.psm.synaptics.window_min. */
5987 sc->syninfo.window_min = 4;
5988 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
5989 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
5990 "window_min", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
5991 sc, SYNAPTICS_SYSCTL_WINDOW_MIN,
5992 synaptics_sysctl, "I",
5993 "Minimum window size to start an action");
5995 /* hw.psm.synaptics.window_max. */
5996 sc->syninfo.window_max = 10;
5997 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
5998 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
5999 "window_max", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6000 sc, SYNAPTICS_SYSCTL_WINDOW_MAX,
6001 synaptics_sysctl, "I",
6002 "Maximum window size");
6004 /* hw.psm.synaptics.multiplicator. */
6005 sc->syninfo.multiplicator = 10000;
6006 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
6007 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
6008 "multiplicator", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6009 sc, SYNAPTICS_SYSCTL_MULTIPLICATOR,
6010 synaptics_sysctl, "I",
6011 "Multiplicator to increase precision in averages and divisions");
6013 /* hw.psm.synaptics.weight_current. */
6014 sc->syninfo.weight_current = 3;
6015 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
6016 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
6017 "weight_current", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6018 sc, SYNAPTICS_SYSCTL_WEIGHT_CURRENT,
6019 synaptics_sysctl, "I",
6020 "Weight of the current movement in the new average");
6022 /* hw.psm.synaptics.weight_previous. */
6023 sc->syninfo.weight_previous = 6;
6024 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
6025 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
6026 "weight_previous", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6027 sc, SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS,
6028 synaptics_sysctl, "I",
6029 "Weight of the previous average");
6031 /* hw.psm.synaptics.weight_previous_na. */
6032 sc->syninfo.weight_previous_na = 20;
6033 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
6034 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
6035 "weight_previous_na", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6036 sc, SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS_NA,
6037 synaptics_sysctl, "I",
6038 "Weight of the previous average (inside the noisy area)");
6040 /* hw.psm.synaptics.weight_len_squared. */
6041 sc->syninfo.weight_len_squared = 2000;
6042 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
6043 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
6044 "weight_len_squared", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6045 sc, SYNAPTICS_SYSCTL_WEIGHT_LEN_SQUARED,
6046 synaptics_sysctl, "I",
6047 "Length (squared) of segments where weight_previous "
6048 "starts to decrease");
6050 /* hw.psm.synaptics.div_min. */
6051 sc->syninfo.div_min = 9;
6052 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
6053 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
6054 "div_min", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6055 sc, SYNAPTICS_SYSCTL_DIV_MIN,
6056 synaptics_sysctl, "I",
6057 "Divisor for fast movements");
6059 /* hw.psm.synaptics.div_max. */
6060 sc->syninfo.div_max = 17;
6061 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
6062 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
6063 "div_max", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6064 sc, SYNAPTICS_SYSCTL_DIV_MAX,
6065 synaptics_sysctl, "I",
6066 "Divisor for slow movements");
6068 /* hw.psm.synaptics.div_max_na. */
6069 sc->syninfo.div_max_na = 30;
6070 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
6071 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
6072 "div_max_na", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6073 sc, SYNAPTICS_SYSCTL_DIV_MAX_NA,
6074 synaptics_sysctl, "I",
6075 "Divisor with slow movements (inside the noisy area)");
6077 /* hw.psm.synaptics.div_len. */
6078 sc->syninfo.div_len = 100;
6079 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
6080 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
6081 "div_len", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6082 sc, SYNAPTICS_SYSCTL_DIV_LEN,
6083 synaptics_sysctl, "I",
6084 "Length of segments where div_max starts to decrease");
6086 /* hw.psm.synaptics.tap_max_delta. */
6087 sc->syninfo.tap_max_delta = 80;
6088 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
6089 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
6090 "tap_max_delta", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6091 sc, SYNAPTICS_SYSCTL_TAP_MAX_DELTA,
6092 synaptics_sysctl, "I",
6093 "Length of segments above which a tap is ignored");
6095 /* hw.psm.synaptics.tap_min_queue. */
6096 sc->syninfo.tap_min_queue = 2;
6097 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
6098 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
6099 "tap_min_queue", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6100 sc, SYNAPTICS_SYSCTL_TAP_MIN_QUEUE,
6101 synaptics_sysctl, "I",
6102 "Number of packets required to consider a tap");
6104 /* hw.psm.synaptics.taphold_timeout. */
6105 sc->gesture.in_taphold = 0;
6106 sc->syninfo.taphold_timeout = tap_timeout;
6107 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
6108 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
6109 "taphold_timeout", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6110 sc, SYNAPTICS_SYSCTL_TAPHOLD_TIMEOUT,
6111 synaptics_sysctl, "I",
6112 "Maximum elapsed time between two taps to consider a tap-hold "
6115 /* hw.psm.synaptics.vscroll_hor_area. */
6116 sc->syninfo.vscroll_hor_area = 0; /* 1300 */
6117 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
6118 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
6119 "vscroll_hor_area", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6120 sc, SYNAPTICS_SYSCTL_VSCROLL_HOR_AREA,
6121 synaptics_sysctl, "I",
6122 "Area reserved for horizontal virtual scrolling");
6124 /* hw.psm.synaptics.vscroll_ver_area. */
6125 sc->syninfo.vscroll_ver_area = -400 - sc->syninfo.margin_right;
6126 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
6127 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
6128 "vscroll_ver_area", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6129 sc, SYNAPTICS_SYSCTL_VSCROLL_VER_AREA,
6130 synaptics_sysctl, "I",
6131 "Area reserved for vertical virtual scrolling");
6133 /* hw.psm.synaptics.vscroll_min_delta. */
6134 sc->syninfo.vscroll_min_delta = 50;
6135 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
6136 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
6137 "vscroll_min_delta", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6138 sc, SYNAPTICS_SYSCTL_VSCROLL_MIN_DELTA,
6139 synaptics_sysctl, "I",
6140 "Minimum movement to consider virtual scrolling");
6142 /* hw.psm.synaptics.vscroll_div_min. */
6143 sc->syninfo.vscroll_div_min = 100;
6144 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
6145 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
6146 "vscroll_div_min", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6147 sc, SYNAPTICS_SYSCTL_VSCROLL_DIV_MIN,
6148 synaptics_sysctl, "I",
6149 "Divisor for fast scrolling");
6151 /* hw.psm.synaptics.vscroll_div_min. */
6152 sc->syninfo.vscroll_div_max = 150;
6153 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
6154 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
6155 "vscroll_div_max", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6156 sc, SYNAPTICS_SYSCTL_VSCROLL_DIV_MAX,
6157 synaptics_sysctl, "I",
6158 "Divisor for slow scrolling");
6160 /* hw.psm.synaptics.touchpad_off. */
6161 sc->syninfo.touchpad_off = 0;
6162 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
6163 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
6164 "touchpad_off", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6165 sc, SYNAPTICS_SYSCTL_TOUCHPAD_OFF,
6166 synaptics_sysctl, "I",
6167 "Turn off touchpad");
6169 sc->syninfo.three_finger_drag = 0;
6170 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
6171 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
6172 "three_finger_drag", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6173 sc, SYNAPTICS_SYSCTL_THREE_FINGER_DRAG,
6174 synaptics_sysctl, "I",
6175 "Enable dragging with three fingers");
6177 /* hw.psm.synaptics.natural_scroll. */
6178 sc->syninfo.natural_scroll = 0;
6179 SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
6180 SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
6181 "natural_scroll", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6182 sc, SYNAPTICS_SYSCTL_NATURAL_SCROLL,
6183 synaptics_sysctl, "I",
6184 "Enable natural scrolling");
6186 sc->syninfo.softbuttons_y = 0;
6187 sc->syninfo.softbutton2_x = 0;
6188 sc->syninfo.softbutton3_x = 0;
6190 /* skip softbuttons sysctl on not clickpads */
6191 if (sc->synhw.capClickPad)
6192 synaptics_sysctl_create_softbuttons_tree(sc);
6196 synaptics_preferred_mode(struct psm_softc *sc) {
6199 /* Check if we are in relative mode */
6200 if (sc->hw.model != MOUSE_MODEL_SYNAPTICS) {
6201 if (tap_enabled == 0)
6203 * Disable tap & drag gestures. We use a Mode Byte
6204 * and set the DisGest bit (see §2.5 of Synaptics
6205 * TouchPad Interfacing Guide).
6210 * Enable tap & drag gestures. We use a Mode Byte
6211 * and clear the DisGest bit (see §2.5 of Synaptics
6212 * TouchPad Interfacing Guide).
6219 /* request wmode where available */
6220 if (sc->synhw.capExtended)
6227 synaptics_set_mode(struct psm_softc *sc, int mode_byte) {
6228 mouse_ext_command(sc->kbdc, mode_byte);
6230 /* "Commit" the Set Mode Byte command sent above. */
6231 set_mouse_sampling_rate(sc->kbdc, 20);
6234 * Enable advanced gestures mode if supported and we are not entering
6235 * passthrough or relative mode.
6237 if ((sc->synhw.capAdvancedGestures || sc->synhw.capReportsV) &&
6238 sc->hw.model == MOUSE_MODEL_SYNAPTICS && !(mode_byte & (1 << 5))) {
6239 mouse_ext_command(sc->kbdc, SYNAPTICS_READ_MODEL_ID);
6240 set_mouse_sampling_rate(sc->kbdc, 0xc8);
6245 * AUX MUX detection code should be placed at very beginning of probe sequence
6246 * at least before 4-byte protocol mouse probes e.g. MS IntelliMouse probe as
6247 * latter can trigger switching the MUX to incompatible state.
6250 enable_synaptics_mux(struct psm_softc *sc, enum probearg arg)
6252 KBDC kbdc = sc->kbdc;
6255 int active_ports_count = 0;
6256 int active_ports_mask = 0;
6258 version = enable_aux_mux(kbdc);
6262 for (port = 0; port < KBDC_AUX_MUX_NUM_PORTS; port++) {
6263 VLOG(3, (LOG_DEBUG, "aux_mux: ping port %d\n", port));
6264 set_active_aux_mux_port(kbdc, port);
6265 if (enable_aux_dev(kbdc) && disable_aux_dev(kbdc)) {
6266 active_ports_count++;
6267 active_ports_mask |= 1 << port;
6272 printf("Active Multiplexing PS/2 controller v%d.%d with %d "
6273 "active port(s)\n", version >> 4 & 0x0f, version & 0x0f,
6274 active_ports_count);
6276 /* psm has a special support for GenMouse + SynTouchpad combination */
6277 if (active_ports_count >= 2) {
6278 for (port = 0; port < KBDC_AUX_MUX_NUM_PORTS; port++) {
6279 if ((active_ports_mask & 1 << port) == 0)
6281 VLOG(3, (LOG_DEBUG, "aux_mux: probe port %d\n", port));
6282 set_active_aux_mux_port(kbdc, port);
6283 probe = enable_synaptics(sc, arg);
6292 /* IRQ handler does not support active multiplexing mode */
6293 disable_aux_mux(kbdc);
6299 enable_synaptics(struct psm_softc *sc, enum probearg arg)
6302 struct psmcpnp_softc *psmcpnp_sc;
6303 KBDC kbdc = sc->kbdc;
6304 synapticshw_t synhw;
6308 VLOG(3, (LOG_DEBUG, "synaptics: BEGIN init\n"));
6311 * Just to be on the safe side: this avoids troubles with
6312 * following mouse_ext_command() when the previous command
6313 * was PSMC_SET_RESOLUTION. Set Scaling has no effect on
6314 * Synaptics Touchpad behaviour.
6316 set_mouse_scaling(kbdc, 1);
6318 /* Identify the Touchpad version. */
6319 if (mouse_ext_command(kbdc, SYNAPTICS_READ_IDENTITY) == 0)
6321 if (get_mouse_status(kbdc, status, 0, 3) != 3)
6323 if (status[1] != 0x47)
6326 bzero(&synhw, sizeof(synhw));
6327 synhw.infoMinor = status[0];
6328 synhw.infoMajor = status[2] & 0x0f;
6331 printf("Synaptics Touchpad v%d.%d\n", synhw.infoMajor,
6334 if (synhw.infoMajor < 4) {
6335 printf(" Unsupported (pre-v4) Touchpad detected\n");
6339 /* Get the Touchpad model information. */
6340 if (mouse_ext_command(kbdc, SYNAPTICS_READ_MODEL_ID) == 0)
6342 if (get_mouse_status(kbdc, status, 0, 3) != 3)
6344 if ((status[1] & 0x01) != 0) {
6345 printf(" Failed to read model information\n");
6349 synhw.infoRot180 = (status[0] & 0x80) != 0;
6350 synhw.infoPortrait = (status[0] & 0x40) != 0;
6351 synhw.infoSensor = status[0] & 0x3f;
6352 synhw.infoHardware = (status[1] & 0xfe) >> 1;
6353 synhw.infoNewAbs = (status[2] & 0x80) != 0;
6354 synhw.capPen = (status[2] & 0x40) != 0;
6355 synhw.infoSimplC = (status[2] & 0x20) != 0;
6356 synhw.infoGeometry = status[2] & 0x0f;
6359 printf(" Model information:\n");
6360 printf(" infoRot180: %d\n", synhw.infoRot180);
6361 printf(" infoPortrait: %d\n", synhw.infoPortrait);
6362 printf(" infoSensor: %d\n", synhw.infoSensor);
6363 printf(" infoHardware: %d\n", synhw.infoHardware);
6364 printf(" infoNewAbs: %d\n", synhw.infoNewAbs);
6365 printf(" capPen: %d\n", synhw.capPen);
6366 printf(" infoSimplC: %d\n", synhw.infoSimplC);
6367 printf(" infoGeometry: %d\n", synhw.infoGeometry);
6370 /* Read the extended capability bits. */
6371 if (mouse_ext_command(kbdc, SYNAPTICS_READ_CAPABILITIES) == 0)
6373 if (get_mouse_status(kbdc, status, 0, 3) != 3)
6375 if (!SYNAPTICS_VERSION_GE(synhw, 7, 5) && status[1] != 0x47) {
6376 printf(" Failed to read extended capability bits\n");
6380 psmcpnp = devclass_get_device(devclass_find(PSMCPNP_DRIVER_NAME),
6382 psmcpnp_sc = (psmcpnp != NULL) ? device_get_softc(psmcpnp) : NULL;
6384 /* Set the different capabilities when they exist. */
6386 synhw.capExtended = (status[0] & 0x80) != 0;
6387 if (synhw.capExtended) {
6388 synhw.nExtendedQueries = (status[0] & 0x70) >> 4;
6389 synhw.capMiddle = (status[0] & 0x04) != 0;
6390 synhw.capPassthrough = (status[2] & 0x80) != 0;
6391 synhw.capLowPower = (status[2] & 0x40) != 0;
6392 synhw.capMultiFingerReport =
6393 (status[2] & 0x20) != 0;
6394 synhw.capSleep = (status[2] & 0x10) != 0;
6395 synhw.capFourButtons = (status[2] & 0x08) != 0;
6396 synhw.capBallistics = (status[2] & 0x04) != 0;
6397 synhw.capMultiFinger = (status[2] & 0x02) != 0;
6398 synhw.capPalmDetect = (status[2] & 0x01) != 0;
6400 if (!set_mouse_scaling(kbdc, 1))
6402 if (mouse_ext_command(kbdc, SYNAPTICS_READ_RESOLUTIONS) == 0)
6404 if (get_mouse_status(kbdc, status, 0, 3) != 3)
6407 if (status[0] != 0 && (status[1] & 0x80) && status[2] != 0) {
6408 synhw.infoXupmm = status[0];
6409 synhw.infoYupmm = status[2];
6413 printf(" Extended capabilities:\n");
6414 printf(" capExtended: %d\n", synhw.capExtended);
6415 printf(" capMiddle: %d\n", synhw.capMiddle);
6416 printf(" nExtendedQueries: %d\n",
6417 synhw.nExtendedQueries);
6418 printf(" capPassthrough: %d\n", synhw.capPassthrough);
6419 printf(" capLowPower: %d\n", synhw.capLowPower);
6420 printf(" capMultiFingerReport: %d\n",
6421 synhw.capMultiFingerReport);
6422 printf(" capSleep: %d\n", synhw.capSleep);
6423 printf(" capFourButtons: %d\n", synhw.capFourButtons);
6424 printf(" capBallistics: %d\n", synhw.capBallistics);
6425 printf(" capMultiFinger: %d\n", synhw.capMultiFinger);
6426 printf(" capPalmDetect: %d\n", synhw.capPalmDetect);
6427 printf(" infoXupmm: %d\n", synhw.infoXupmm);
6428 printf(" infoYupmm: %d\n", synhw.infoYupmm);
6432 * If nExtendedQueries is 1 or greater, then the TouchPad
6433 * supports this number of extended queries. We can load
6434 * more information about buttons using query 0x09.
6436 if (synhw.nExtendedQueries >= 1) {
6437 if (!set_mouse_scaling(kbdc, 1))
6439 if (mouse_ext_command(kbdc,
6440 SYNAPTICS_READ_EXTENDED) == 0)
6442 if (get_mouse_status(kbdc, status, 0, 3) != 3)
6444 synhw.verticalScroll = (status[0] & 0x01) != 0;
6445 synhw.horizontalScroll = (status[0] & 0x02) != 0;
6446 synhw.verticalWheel = (status[0] & 0x08) != 0;
6447 synhw.nExtendedButtons = (status[1] & 0xf0) >> 4;
6448 synhw.capEWmode = (status[0] & 0x04) != 0;
6450 printf(" Extended model ID:\n");
6451 printf(" verticalScroll: %d\n",
6452 synhw.verticalScroll);
6453 printf(" horizontalScroll: %d\n",
6454 synhw.horizontalScroll);
6455 printf(" verticalWheel: %d\n",
6456 synhw.verticalWheel);
6457 printf(" nExtendedButtons: %d\n",
6458 synhw.nExtendedButtons);
6459 printf(" capEWmode: %d\n",
6463 * Add the number of extended buttons to the total
6464 * button support count, including the middle button
6465 * if capMiddle support bit is set.
6467 buttons = synhw.nExtendedButtons + synhw.capMiddle;
6470 * If the capFourButtons support bit is set,
6471 * add a fourth button to the total button count.
6473 buttons = synhw.capFourButtons ? 1 : 0;
6475 /* Read the continued capabilities bits. */
6476 if (synhw.nExtendedQueries >= 4) {
6477 if (!set_mouse_scaling(kbdc, 1))
6479 if (mouse_ext_command(kbdc,
6480 SYNAPTICS_READ_CAPABILITIES_CONT) == 0)
6482 if (get_mouse_status(kbdc, status, 0, 3) != 3)
6485 synhw.capClickPad = (status[1] & 0x01) << 1;
6486 synhw.capClickPad |= (status[0] & 0x10) != 0;
6487 synhw.capDeluxeLEDs = (status[1] & 0x02) != 0;
6488 synhw.noAbsoluteFilter = (status[1] & 0x04) != 0;
6489 synhw.capReportsV = (status[1] & 0x08) != 0;
6490 synhw.capUniformClickPad = (status[1] & 0x10) != 0;
6491 synhw.capReportsMin = (status[1] & 0x20) != 0;
6492 synhw.capInterTouch = (status[1] & 0x40) != 0;
6493 synhw.capReportsMax = (status[0] & 0x02) != 0;
6494 synhw.capClearPad = (status[0] & 0x04) != 0;
6495 synhw.capAdvancedGestures = (status[0] & 0x08) != 0;
6496 synhw.capCoveredPad = (status[0] & 0x80) != 0;
6498 if (synhw.capReportsMax) {
6499 if (!set_mouse_scaling(kbdc, 1))
6501 if (mouse_ext_command(kbdc,
6502 SYNAPTICS_READ_MAX_COORDS) == 0)
6504 if (get_mouse_status(kbdc, status, 0, 3) != 3)
6507 synhw.maximumXCoord = (status[0] << 5) |
6508 ((status[1] & 0x0f) << 1);
6509 synhw.maximumYCoord = (status[2] << 5) |
6510 ((status[1] & 0xf0) >> 3);
6513 * Typical bezel limits. Taken from 'Synaptics
6514 * PS/2 * TouchPad Interfacing Guide' p.3.2.3.
6516 synhw.maximumXCoord = 5472;
6517 synhw.maximumYCoord = 4448;
6520 if (synhw.capReportsMin) {
6521 if (!set_mouse_scaling(kbdc, 1))
6523 if (mouse_ext_command(kbdc,
6524 SYNAPTICS_READ_MIN_COORDS) == 0)
6526 if (get_mouse_status(kbdc, status, 0, 3) != 3)
6529 synhw.minimumXCoord = (status[0] << 5) |
6530 ((status[1] & 0x0f) << 1);
6531 synhw.minimumYCoord = (status[2] << 5) |
6532 ((status[1] & 0xf0) >> 3);
6535 * Typical bezel limits. Taken from 'Synaptics
6536 * PS/2 * TouchPad Interfacing Guide' p.3.2.3.
6538 synhw.minimumXCoord = 1472;
6539 synhw.minimumYCoord = 1408;
6543 * ClickPad properties are not exported through PS/2
6544 * protocol. Detection is based on controller's PnP ID.
6546 if (synhw.capClickPad && psmcpnp_sc != NULL) {
6547 switch (psmcpnp_sc->type) {
6548 case PSMCPNP_FORCEPAD:
6551 case PSMCPNP_TOPBUTTONPAD:
6552 synhw.topButtonPad = 1;
6560 printf(" Continued capabilities:\n");
6561 printf(" capClickPad: %d\n",
6563 printf(" capDeluxeLEDs: %d\n",
6564 synhw.capDeluxeLEDs);
6565 printf(" noAbsoluteFilter: %d\n",
6566 synhw.noAbsoluteFilter);
6567 printf(" capReportsV: %d\n",
6569 printf(" capUniformClickPad: %d\n",
6570 synhw.capUniformClickPad);
6571 printf(" capReportsMin: %d\n",
6572 synhw.capReportsMin);
6573 printf(" capInterTouch: %d\n",
6574 synhw.capInterTouch);
6575 printf(" capReportsMax: %d\n",
6576 synhw.capReportsMax);
6577 printf(" capClearPad: %d\n",
6579 printf(" capAdvancedGestures: %d\n",
6580 synhw.capAdvancedGestures);
6581 printf(" capCoveredPad: %d\n",
6582 synhw.capCoveredPad);
6583 if (synhw.capReportsMax) {
6584 printf(" maximumXCoord: %d\n",
6585 synhw.maximumXCoord);
6586 printf(" maximumYCoord: %d\n",
6587 synhw.maximumYCoord);
6589 if (synhw.capReportsMin) {
6590 printf(" minimumXCoord: %d\n",
6591 synhw.minimumXCoord);
6592 printf(" minimumYCoord: %d\n",
6593 synhw.minimumYCoord);
6595 if (synhw.capClickPad) {
6596 printf(" Clickpad capabilities:\n");
6597 printf(" forcePad: %d\n",
6599 printf(" topButtonPad: %d\n",
6600 synhw.topButtonPad);
6603 buttons += synhw.capClickPad;
6608 if (synhw.capExtended)
6609 printf(" Additional Buttons: %d\n", buttons);
6611 printf(" No extended capabilities\n");
6615 * Add the default number of 3 buttons to the total
6616 * count of supported buttons reported above.
6621 * Read the mode byte.
6623 * XXX: Note the Synaptics documentation also defines the first
6624 * byte of the response to this query to be a constant 0x3b, this
6625 * does not appear to be true for Touchpads with guest devices.
6627 if (mouse_ext_command(kbdc, SYNAPTICS_READ_MODES) == 0)
6629 if (get_mouse_status(kbdc, status, 0, 3) != 3)
6631 if (!SYNAPTICS_VERSION_GE(synhw, 7, 5) && status[1] != 0x47) {
6632 printf(" Failed to read mode byte\n");
6638 if (!synaptics_support)
6641 /* Set mouse type just now for synaptics_set_mode() */
6642 sc->hw.model = MOUSE_MODEL_SYNAPTICS;
6644 synaptics_set_mode(sc, synaptics_preferred_mode(sc));
6646 if (trackpoint_support && synhw.capPassthrough) {
6647 enable_trackpoint(sc, arg);
6650 VLOG(3, (LOG_DEBUG, "synaptics: END init (%d buttons)\n", buttons));
6653 /* Create sysctl tree. */
6654 synaptics_sysctl_create_tree(sc, "synaptics",
6655 "Synaptics TouchPad");
6656 sc->hw.buttons = buttons;
6663 synaptics_passthrough_on(struct psm_softc *sc)
6665 VLOG(2, (LOG_NOTICE, "psm: setting pass-through mode.\n"));
6666 synaptics_set_mode(sc, synaptics_preferred_mode(sc) | (1 << 5));
6670 synaptics_passthrough_off(struct psm_softc *sc)
6672 VLOG(2, (LOG_NOTICE, "psm: turning pass-through mode off.\n"));
6673 set_mouse_scaling(sc->kbdc, 2);
6674 set_mouse_scaling(sc->kbdc, 1);
6675 synaptics_set_mode(sc, synaptics_preferred_mode(sc));
6678 /* IBM/Lenovo TrackPoint */
6680 trackpoint_command(struct psm_softc *sc, int cmd, int loc, int val)
6682 const int seq[] = { 0xe2, cmd, loc, val };
6685 if (sc->synhw.capPassthrough)
6686 synaptics_passthrough_on(sc);
6688 for (i = 0; i < nitems(seq); i++) {
6689 if (sc->synhw.capPassthrough &&
6690 (seq[i] == 0xff || seq[i] == 0xe7))
6691 if (send_aux_command(sc->kbdc, 0xe7) != PSM_ACK) {
6692 synaptics_passthrough_off(sc);
6695 if (send_aux_command(sc->kbdc, seq[i]) != PSM_ACK) {
6696 if (sc->synhw.capPassthrough)
6697 synaptics_passthrough_off(sc);
6702 if (sc->synhw.capPassthrough)
6703 synaptics_passthrough_off(sc);
6708 #define PSM_TPINFO(x) offsetof(struct psm_softc, tpinfo.x)
6714 trackpoint_sysctl(SYSCTL_HANDLER_ARGS)
6716 static const int data[][3] = {
6717 { 0x00, 0x4a, PSM_TPINFO(sensitivity) },
6718 { 0x00, 0x4d, PSM_TPINFO(inertia) },
6719 { 0x00, 0x60, PSM_TPINFO(uplateau) },
6720 { 0x00, 0x57, PSM_TPINFO(reach) },
6721 { 0x00, 0x58, PSM_TPINFO(draghys) },
6722 { 0x00, 0x59, PSM_TPINFO(mindrag) },
6723 { 0x00, 0x5a, PSM_TPINFO(upthresh) },
6724 { 0x00, 0x5c, PSM_TPINFO(threshold) },
6725 { 0x00, 0x5d, PSM_TPINFO(jenks) },
6726 { 0x00, 0x5e, PSM_TPINFO(ztime) },
6727 { 0x01, 0x2c, PSM_TPINFO(pts) },
6728 { 0x08, 0x2d, PSM_TPINFO(skipback) }
6730 struct psm_softc *sc;
6731 int error, newval, *oldvalp;
6734 if (arg1 == NULL || arg2 < 0 || arg2 >= nitems(data))
6738 oldvalp = (int *)((intptr_t)sc + tp[TPINFO]);
6740 error = sysctl_handle_int(oidp, &newval, 0, req);
6743 if (newval == *oldvalp)
6745 if (newval < 0 || newval > (tp[TPMASK] == 0 ? 255 : 1))
6747 error = trackpoint_command(sc, tp[TPMASK] == 0 ? 0x81 : 0x47,
6748 tp[TPLOC], tp[TPMASK] == 0 ? newval : tp[TPMASK]);
6757 trackpoint_sysctl_create_tree(struct psm_softc *sc)
6760 if (sc->tpinfo.sysctl_tree != NULL)
6763 /* Attach extra trackpoint sysctl nodes under hw.psm.trackpoint */
6764 sysctl_ctx_init(&sc->tpinfo.sysctl_ctx);
6765 sc->tpinfo.sysctl_tree = SYSCTL_ADD_NODE(&sc->tpinfo.sysctl_ctx,
6766 SYSCTL_STATIC_CHILDREN(_hw_psm), OID_AUTO, "trackpoint", CTLFLAG_RD,
6767 0, "IBM/Lenovo TrackPoint");
6769 /* hw.psm.trackpoint.sensitivity */
6770 sc->tpinfo.sensitivity = 0x80;
6771 SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
6772 SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
6773 "sensitivity", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6774 sc, TRACKPOINT_SYSCTL_SENSITIVITY,
6775 trackpoint_sysctl, "I",
6778 /* hw.psm.trackpoint.negative_inertia */
6779 sc->tpinfo.inertia = 0x06;
6780 SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
6781 SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
6782 "negative_inertia", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6783 sc, TRACKPOINT_SYSCTL_NEGATIVE_INERTIA,
6784 trackpoint_sysctl, "I",
6785 "Negative inertia factor");
6787 /* hw.psm.trackpoint.upper_plateau */
6788 sc->tpinfo.uplateau = 0x61;
6789 SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
6790 SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
6791 "upper_plateau", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6792 sc, TRACKPOINT_SYSCTL_UPPER_PLATEAU,
6793 trackpoint_sysctl, "I",
6794 "Transfer function upper plateau speed");
6796 /* hw.psm.trackpoint.backup_range */
6797 sc->tpinfo.reach = 0x0a;
6798 SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
6799 SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
6800 "backup_range", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6801 sc, TRACKPOINT_SYSCTL_BACKUP_RANGE,
6802 trackpoint_sysctl, "I",
6805 /* hw.psm.trackpoint.drag_hysteresis */
6806 sc->tpinfo.draghys = 0xff;
6807 SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
6808 SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
6809 "drag_hysteresis", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6810 sc, TRACKPOINT_SYSCTL_DRAG_HYSTERESIS,
6811 trackpoint_sysctl, "I",
6814 /* hw.psm.trackpoint.minimum_drag */
6815 sc->tpinfo.mindrag = 0x14;
6816 SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
6817 SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
6818 "minimum_drag", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6819 sc, TRACKPOINT_SYSCTL_MINIMUM_DRAG,
6820 trackpoint_sysctl, "I",
6823 /* hw.psm.trackpoint.up_threshold */
6824 sc->tpinfo.upthresh = 0xff;
6825 SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
6826 SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
6827 "up_threshold", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6828 sc, TRACKPOINT_SYSCTL_UP_THRESHOLD,
6829 trackpoint_sysctl, "I",
6830 "Up threshold for release");
6832 /* hw.psm.trackpoint.threshold */
6833 sc->tpinfo.threshold = 0x08;
6834 SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
6835 SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
6836 "threshold", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6837 sc, TRACKPOINT_SYSCTL_THRESHOLD,
6838 trackpoint_sysctl, "I",
6841 /* hw.psm.trackpoint.jenks_curvature */
6842 sc->tpinfo.jenks = 0x87;
6843 SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
6844 SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
6845 "jenks_curvature", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6846 sc, TRACKPOINT_SYSCTL_JENKS_CURVATURE,
6847 trackpoint_sysctl, "I",
6850 /* hw.psm.trackpoint.z_time */
6851 sc->tpinfo.ztime = 0x26;
6852 SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
6853 SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
6854 "z_time", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6855 sc, TRACKPOINT_SYSCTL_Z_TIME,
6856 trackpoint_sysctl, "I",
6859 /* hw.psm.trackpoint.press_to_select */
6860 sc->tpinfo.pts = 0x00;
6861 SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
6862 SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
6863 "press_to_select", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6864 sc, TRACKPOINT_SYSCTL_PRESS_TO_SELECT,
6865 trackpoint_sysctl, "I",
6868 /* hw.psm.trackpoint.skip_backups */
6869 sc->tpinfo.skipback = 0x00;
6870 SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
6871 SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
6872 "skip_backups", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
6873 sc, TRACKPOINT_SYSCTL_SKIP_BACKUPS,
6874 trackpoint_sysctl, "I",
6875 "Skip backups from drags");
6879 set_trackpoint_parameters(struct psm_softc *sc)
6881 trackpoint_command(sc, 0x81, 0x4a, sc->tpinfo.sensitivity);
6882 trackpoint_command(sc, 0x81, 0x60, sc->tpinfo.uplateau);
6883 trackpoint_command(sc, 0x81, 0x4d, sc->tpinfo.inertia);
6884 trackpoint_command(sc, 0x81, 0x57, sc->tpinfo.reach);
6885 trackpoint_command(sc, 0x81, 0x58, sc->tpinfo.draghys);
6886 trackpoint_command(sc, 0x81, 0x59, sc->tpinfo.mindrag);
6887 trackpoint_command(sc, 0x81, 0x5a, sc->tpinfo.upthresh);
6888 trackpoint_command(sc, 0x81, 0x5c, sc->tpinfo.threshold);
6889 trackpoint_command(sc, 0x81, 0x5d, sc->tpinfo.jenks);
6890 trackpoint_command(sc, 0x81, 0x5e, sc->tpinfo.ztime);
6891 if (sc->tpinfo.pts == 0x01)
6892 trackpoint_command(sc, 0x47, 0x2c, 0x01);
6893 if (sc->tpinfo.skipback == 0x01)
6894 trackpoint_command(sc, 0x47, 0x2d, 0x08);
6898 enable_trackpoint(struct psm_softc *sc, enum probearg arg)
6900 KBDC kbdc = sc->kbdc;
6904 * If called from enable_synaptics(), make sure that passthrough
6905 * mode is enabled so we can reach the trackpoint.
6906 * However, passthrough mode must be disabled before setting the
6907 * trackpoint parameters, as rackpoint_command() enables and disables
6908 * passthrough mode on its own.
6910 if (sc->synhw.capPassthrough)
6911 synaptics_passthrough_on(sc);
6913 if (send_aux_command(kbdc, 0xe1) != PSM_ACK ||
6914 read_aux_data(kbdc) != 0x01)
6916 id = read_aux_data(kbdc);
6921 if (!trackpoint_support)
6924 if (sc->synhw.capPassthrough)
6925 synaptics_passthrough_off(sc);
6928 trackpoint_sysctl_create_tree(sc);
6930 * Don't overwrite hwid and buttons when we are
6933 if (!sc->synhw.capPassthrough) {
6939 set_trackpoint_parameters(sc);
6944 if (sc->synhw.capPassthrough)
6945 synaptics_passthrough_off(sc);
6950 /* Interlink electronics VersaPad */
6952 enable_versapad(struct psm_softc *sc, enum probearg arg)
6954 KBDC kbdc = sc->kbdc;
6957 set_mouse_resolution(kbdc, PSMD_RES_MEDIUM_HIGH); /* set res. 2 */
6958 set_mouse_sampling_rate(kbdc, 100); /* set rate 100 */
6959 set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
6960 set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
6961 set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
6962 set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
6963 if (get_mouse_status(kbdc, data, 0, 3) < 3) /* get status */
6965 if (data[2] != 0xa || data[1] != 0 ) /* rate == 0xa && res. == 0 */
6967 set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
6969 return (TRUE); /* PS/2 absolute mode */
6972 /* Elantech Touchpad */
6974 elantech_read_1(KBDC kbdc, int hwversion, int reg, int *val)
6976 int res, readcmd, retidx;
6979 readcmd = hwversion == 2 ? ELANTECH_REG_READ : ELANTECH_REG_RDWR;
6980 retidx = hwversion == 4 ? 1 : 0;
6982 res = send_aux_command(kbdc, ELANTECH_CUSTOM_CMD) != PSM_ACK;
6983 res |= send_aux_command(kbdc, readcmd) != PSM_ACK;
6984 res |= send_aux_command(kbdc, ELANTECH_CUSTOM_CMD) != PSM_ACK;
6985 res |= send_aux_command(kbdc, reg) != PSM_ACK;
6986 res |= get_mouse_status(kbdc, resp, 0, 3) != 3;
6989 *val = resp[retidx];
6995 elantech_write_1(KBDC kbdc, int hwversion, int reg, int val)
6999 writecmd = hwversion == 2 ? ELANTECH_REG_WRITE : ELANTECH_REG_RDWR;
7001 res = send_aux_command(kbdc, ELANTECH_CUSTOM_CMD) != PSM_ACK;
7002 res |= send_aux_command(kbdc, writecmd) != PSM_ACK;
7003 res |= send_aux_command(kbdc, ELANTECH_CUSTOM_CMD) != PSM_ACK;
7004 res |= send_aux_command(kbdc, reg) != PSM_ACK;
7005 if (hwversion == 4) {
7006 res |= send_aux_command(kbdc, ELANTECH_CUSTOM_CMD) != PSM_ACK;
7007 res |= send_aux_command(kbdc, writecmd) != PSM_ACK;
7009 res |= send_aux_command(kbdc, ELANTECH_CUSTOM_CMD) != PSM_ACK;
7010 res |= send_aux_command(kbdc, val) != PSM_ACK;
7011 res |= set_mouse_scaling(kbdc, 1) == 0;
7017 elantech_cmd(KBDC kbdc, int hwversion, int cmd, int *resp)
7021 if (hwversion == 2) {
7022 res = set_mouse_scaling(kbdc, 1) == 0;
7023 res |= mouse_ext_command(kbdc, cmd) == 0;
7025 res = send_aux_command(kbdc, ELANTECH_CUSTOM_CMD) != PSM_ACK;
7026 res |= send_aux_command(kbdc, cmd) != PSM_ACK;
7028 res |= get_mouse_status(kbdc, resp, 0, 3) != 3;
7034 elantech_init(KBDC kbdc, elantechhw_t *elanhw)
7036 int i, val, res, hwversion, reg10;
7038 /* set absolute mode */
7039 hwversion = elanhw->hwversion;
7041 switch (hwversion) {
7043 reg10 = elanhw->fwversion == 0x020030 ? 0x54 : 0xc4;
7044 res = elantech_write_1(kbdc, hwversion, 0x10, reg10);
7047 res = elantech_write_1(kbdc, hwversion, 0x11, 0x8A);
7051 res = elantech_write_1(kbdc, hwversion, 0x10, reg10);
7054 res = elantech_write_1(kbdc, hwversion, 0x07, 0x01);
7060 /* Read back reg 0x10 to ensure hardware is ready. */
7061 if (res == 0 && reg10 >= 0) {
7062 for (i = 0; i < 5; i++) {
7063 if (elantech_read_1(kbdc, hwversion, 0x10, &val) == 0)
7072 printf("couldn't set absolute mode\n");
7078 elantech_init_synaptics(struct psm_softc *sc)
7081 /* Set capabilites required by movement smother */
7082 sc->synhw.infoMajor = sc->elanhw.hwversion;
7083 sc->synhw.infoMinor = sc->elanhw.fwversion;
7084 sc->synhw.infoXupmm = sc->elanhw.dpmmx;
7085 sc->synhw.infoYupmm = sc->elanhw.dpmmy;
7086 sc->synhw.verticalScroll = 0;
7087 sc->synhw.nExtendedQueries = 4;
7088 sc->synhw.capExtended = 1;
7089 sc->synhw.capPassthrough = sc->elanhw.hastrackpoint;
7090 sc->synhw.capClickPad = sc->elanhw.isclickpad;
7091 sc->synhw.capMultiFinger = 1;
7092 if (sc->elanhw.issemimt)
7093 sc->synhw.capAdvancedGestures = 1;
7095 sc->synhw.capReportsV = 1;
7096 sc->synhw.capPalmDetect = 1;
7097 sc->synhw.capPen = 0;
7098 sc->synhw.capReportsMax = 1;
7099 sc->synhw.maximumXCoord = sc->elanhw.sizex;
7100 sc->synhw.maximumYCoord = sc->elanhw.sizey;
7101 sc->synhw.capReportsMin = 1;
7102 sc->synhw.minimumXCoord = 0;
7103 sc->synhw.minimumYCoord = 0;
7105 if (sc->syninfo.sysctl_tree == NULL) {
7106 synaptics_sysctl_create_tree(sc, "elantech",
7107 "Elantech Touchpad");
7110 * Adjust synaptic smoother tunables
7111 * 1. Disable finger detection pressure threshold. Unlike
7112 * synaptics we assume the finger is acting when packet with
7113 * its X&Y arrives not when pressure exceedes some threshold
7114 * 2. Disable unrelated features like margins and noisy areas
7115 * 3. Disable virtual scroll areas as 2nd finger is preferable
7116 * 4. For clickpads set bottom quarter as 42% - 16% - 42% sized
7118 * 5. Scale down divisors and movement lengths by a factor of 3
7119 * where 3 is Synaptics to Elantech (~2200/800) dpi ratio
7122 /* Set reporting range to be equal touchpad size */
7123 sc->syninfo.max_x = sc->elanhw.sizex;
7124 sc->syninfo.max_y = sc->elanhw.sizey;
7126 /* Disable finger detection pressure threshold */
7127 sc->syninfo.min_pressure = 1;
7129 /* Adjust palm width to nearly match synaptics w=10 */
7130 sc->syninfo.max_width = 7;
7132 /* Elans often report double & triple taps as single event */
7133 sc->syninfo.tap_min_queue = 1;
7135 /* Use full area of touchpad */
7136 sc->syninfo.margin_top = 0;
7137 sc->syninfo.margin_right = 0;
7138 sc->syninfo.margin_bottom = 0;
7139 sc->syninfo.margin_left = 0;
7141 /* Disable noisy area */
7142 sc->syninfo.na_top = 0;
7143 sc->syninfo.na_right = 0;
7144 sc->syninfo.na_bottom = 0;
7145 sc->syninfo.na_left = 0;
7147 /* Tune divisors and movement lengths */
7148 sc->syninfo.weight_len_squared = 200;
7149 sc->syninfo.div_min = 3;
7150 sc->syninfo.div_max = 6;
7151 sc->syninfo.div_max_na = 10;
7152 sc->syninfo.div_len = 30;
7153 sc->syninfo.tap_max_delta = 25;
7155 /* Disable virtual scrolling areas and tune its divisors */
7156 sc->syninfo.vscroll_hor_area = 0;
7157 sc->syninfo.vscroll_ver_area = 0;
7158 sc->syninfo.vscroll_min_delta = 15;
7159 sc->syninfo.vscroll_div_min = 30;
7160 sc->syninfo.vscroll_div_max = 50;
7162 /* Set bottom quarter as 42% - 16% - 42% sized softbuttons */
7163 if (sc->elanhw.isclickpad) {
7164 sc->syninfo.softbuttons_y = sc->elanhw.sizey / 4;
7165 sc->syninfo.softbutton2_x = sc->elanhw.sizex * 11 / 25;
7166 sc->syninfo.softbutton3_x = sc->elanhw.sizex * 14 / 25;
7174 enable_elantech(struct psm_softc *sc, enum probearg arg)
7176 static const int ic2hw[] =
7177 /*IC: 0 1 2 3 4 5 6 7 8 9 a b c d e f */
7178 { 0, 0, 2, 0, 2, 3, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4 };
7179 static const int fw_sizes[][3] = {
7180 /* FW.vers MaxX MaxY */
7181 { 0x020030, 1152, 768 },
7182 { 0x020800, 1152, 768 },
7183 { 0x020b00, 1152, 768 },
7184 { 0x040215, 900, 500 },
7185 { 0x040216, 819, 405 },
7186 { 0x040219, 900, 500 },
7188 elantechhw_t elanhw;
7189 int icversion, hwversion, xtr, i, id, resp[3], dpix, dpiy;
7190 KBDC kbdc = sc->kbdc;
7192 VLOG(3, (LOG_DEBUG, "elantech: BEGIN init\n"));
7194 set_mouse_scaling(kbdc, 1);
7195 set_mouse_scaling(kbdc, 1);
7196 set_mouse_scaling(kbdc, 1);
7197 if (get_mouse_status(kbdc, resp, 0, 3) != 3)
7200 if (!ELANTECH_MAGIC(resp))
7203 /* Identify the Touchpad version. */
7204 if (elantech_cmd(kbdc, 2, ELANTECH_FW_VERSION, resp))
7207 bzero(&elanhw, sizeof(elanhw));
7209 elanhw.fwversion = (resp[0] << 16) | (resp[1] << 8) | resp[2];
7210 icversion = resp[0] & 0x0f;
7211 hwversion = ic2hw[icversion];
7214 printf("Elantech touchpad hardware v.%d firmware v.0x%06x\n",
7215 hwversion, elanhw.fwversion);
7217 if (ELANTECH_HW_IS_V1(elanhw.fwversion)) {
7218 printf (" Unsupported touchpad hardware (v1)\n");
7221 if (hwversion == 0) {
7222 printf (" Unknown touchpad hardware (firmware v.0x%06x)\n",
7227 /* Get the Touchpad model information. */
7228 elanhw.hwversion = hwversion;
7229 elanhw.issemimt = hwversion == 2;
7230 elanhw.isclickpad = (resp[1] & 0x10) != 0;
7231 elanhw.hascrc = (resp[1] & 0x40) != 0;
7232 elanhw.haspressure = elanhw.fwversion >= 0x020800;
7234 /* Read the capability bits. */
7235 if (elantech_cmd(kbdc, hwversion, ELANTECH_CAPABILITIES, resp) != 0) {
7236 printf(" Failed to read capability bits\n");
7240 elanhw.ntracesx = imax(resp[1], 3);
7241 elanhw.ntracesy = imax(resp[2], 3);
7242 elanhw.hastrackpoint = (resp[0] & 0x80) != 0;
7244 /* Get the touchpad resolution */
7245 switch (hwversion) {
7247 if (elantech_cmd(kbdc, hwversion, ELANTECH_RESOLUTION, resp)
7249 dpix = (resp[1] & 0x0f) * 10 + 790;
7250 dpiy = ((resp[1] & 0xf0) >> 4) * 10 + 790;
7251 elanhw.dpmmx = (dpix * 10 + 5) / 254;
7252 elanhw.dpmmy = (dpiy * 10 + 5) / 254;
7258 elanhw.dpmmx = elanhw.dpmmy = 32; /* 800 dpi */
7262 if (!elantech_support)
7265 if (elantech_init(kbdc, &elanhw)) {
7266 printf("couldn't initialize elantech touchpad\n");
7271 * Get the touchpad reporting range.
7272 * On HW v.3 touchpads it should be done after switching hardware
7273 * to real resolution mode (by setting bit 3 of reg10)
7275 elanhw.dptracex = elanhw.dptracey = 64;
7276 for (i = 0; i < nitems(fw_sizes); i++) {
7277 if (elanhw.fwversion == fw_sizes[i][0]) {
7278 elanhw.sizex = fw_sizes[i][1];
7279 elanhw.sizey = fw_sizes[i][2];
7283 if (elantech_cmd(kbdc, hwversion, ELANTECH_FW_ID, resp) != 0) {
7284 printf(" Failed to read touchpad size\n");
7285 elanhw.sizex = 10000; /* Arbitrary high values to */
7286 elanhw.sizey = 10000; /* prevent clipping in smoother */
7287 } else if (hwversion == 2) {
7288 if ((elanhw.fwversion >> 16) == 0x14 && (resp[1] & 0x10) &&
7289 !elantech_cmd(kbdc, hwversion, ELANTECH_SAMPLE, resp)) {
7290 elanhw.dptracex = resp[1] / 2;
7291 elanhw.dptracey = resp[2] / 2;
7293 xtr = ((elanhw.fwversion >> 8) == 0x0208) ? 1 : 2;
7294 elanhw.sizex = (elanhw.ntracesx - xtr) * elanhw.dptracex;
7295 elanhw.sizey = (elanhw.ntracesy - xtr) * elanhw.dptracey;
7297 elanhw.sizex = (resp[0] & 0x0f) << 8 | resp[1];
7298 elanhw.sizey = (resp[0] & 0xf0) << 4 | resp[2];
7299 xtr = (elanhw.sizex % (elanhw.ntracesx - 2) == 0) ? 2 : 1;
7300 elanhw.dptracex = elanhw.sizex / (elanhw.ntracesx - xtr);
7301 elanhw.dptracey = elanhw.sizey / (elanhw.ntracesy - xtr);
7305 printf(" Model information:\n");
7306 printf(" MaxX: %d\n", elanhw.sizex);
7307 printf(" MaxY: %d\n", elanhw.sizey);
7308 printf(" DpmmX: %d\n", elanhw.dpmmx);
7309 printf(" DpmmY: %d\n", elanhw.dpmmy);
7310 printf(" TracesX: %d\n", elanhw.ntracesx);
7311 printf(" TracesY: %d\n", elanhw.ntracesy);
7312 printf(" DptraceX: %d\n", elanhw.dptracex);
7313 printf(" DptraceY: %d\n", elanhw.dptracey);
7314 printf(" SemiMT: %d\n", elanhw.issemimt);
7315 printf(" Clickpad: %d\n", elanhw.isclickpad);
7316 printf(" Trackpoint: %d\n", elanhw.hastrackpoint);
7317 printf(" CRC: %d\n", elanhw.hascrc);
7318 printf(" Pressure: %d\n", elanhw.haspressure);
7321 VLOG(3, (LOG_DEBUG, "elantech: END init\n"));
7324 sc->elanhw = elanhw;
7327 /* Initialize synaptics movement smoother */
7328 elantech_init_synaptics(sc);
7330 for (id = 0; id < ELANTECH_MAX_FINGERS; id++)
7331 PSM_FINGER_RESET(sc->elanaction.fingers[id]);
7338 * Return true if 'now' is earlier than (start + (secs.usecs)).
7339 * Now may be NULL and the function will fetch the current time from
7340 * getmicrouptime(), or a cached 'now' can be passed in.
7341 * All values should be numbers derived from getmicrouptime().
7344 timeelapsed(start, secs, usecs, now)
7345 const struct timeval *start, *now;
7348 struct timeval snow, tv;
7350 /* if there is no 'now' passed in, the get it as a convience. */
7352 getmicrouptime(&snow);
7358 timevaladd(&tv, start);
7359 return (timevalcmp(&tv, now, <));
7363 psmresume(device_t dev)
7365 struct psm_softc *sc = device_get_softc(dev);
7366 int unit = device_get_unit(dev);
7369 VLOG(2, (LOG_NOTICE, "psm%d: system resume hook called.\n", unit));
7372 (PSM_CONFIG_HOOKRESUME | PSM_CONFIG_INITAFTERSUSPEND)) == 0)
7375 err = reinitialize(sc, sc->config & PSM_CONFIG_INITAFTERSUSPEND);
7377 if ((sc->state & PSM_ASLP) && !(sc->state & PSM_VALID)) {
7379 * Release the blocked process; it must be notified that
7380 * the device cannot be accessed anymore.
7382 sc->state &= ~PSM_ASLP;
7386 VLOG(2, (LOG_DEBUG, "psm%d: system resume hook exiting.\n", unit));
7391 DRIVER_MODULE(psm, atkbdc, psm_driver, psm_devclass, 0, 0);
7392 #ifdef EVDEV_SUPPORT
7393 MODULE_DEPEND(psm, evdev, 1, 1, 1);
7399 * This sucks up assignments from PNPBIOS and ACPI.
7403 * When the PS/2 mouse device is reported by ACPI or PnP BIOS, it may
7404 * appear BEFORE the AT keyboard controller. As the PS/2 mouse device
7405 * can be probed and attached only after the AT keyboard controller is
7406 * attached, we shall quietly reserve the IRQ resource for later use.
7407 * If the PS/2 mouse device is reported to us AFTER the keyboard controller,
7408 * copy the IRQ resource to the PS/2 mouse device instance hanging
7409 * under the keyboard controller, then probe and attach it.
7412 static devclass_t psmcpnp_devclass;
7414 static device_probe_t psmcpnp_probe;
7415 static device_attach_t psmcpnp_attach;
7417 static device_method_t psmcpnp_methods[] = {
7418 DEVMETHOD(device_probe, psmcpnp_probe),
7419 DEVMETHOD(device_attach, psmcpnp_attach),
7424 static driver_t psmcpnp_driver = {
7425 PSMCPNP_DRIVER_NAME,
7427 sizeof(struct psmcpnp_softc),
7430 static struct isa_pnp_id psmcpnp_ids[] = {
7431 { 0x030fd041, "PS/2 mouse port" }, /* PNP0F03 */
7432 { 0x0e0fd041, "PS/2 mouse port" }, /* PNP0F0E */
7433 { 0x120fd041, "PS/2 mouse port" }, /* PNP0F12 */
7434 { 0x130fd041, "PS/2 mouse port" }, /* PNP0F13 */
7435 { 0x1303d041, "PS/2 port" }, /* PNP0313, XXX */
7436 { 0x02002e4f, "Dell PS/2 mouse port" }, /* Lat. X200, Dell */
7437 { 0x0002a906, "ALPS Glide Point" }, /* ALPS Glide Point */
7438 { 0x80374d24, "IBM PS/2 mouse port" }, /* IBM3780, ThinkPad */
7439 { 0x81374d24, "IBM PS/2 mouse port" }, /* IBM3781, ThinkPad */
7440 { 0x0190d94d, "SONY VAIO PS/2 mouse port"}, /* SNY9001, Vaio */
7441 { 0x0290d94d, "SONY VAIO PS/2 mouse port"}, /* SNY9002, Vaio */
7442 { 0x0390d94d, "SONY VAIO PS/2 mouse port"}, /* SNY9003, Vaio */
7443 { 0x0490d94d, "SONY VAIO PS/2 mouse port"}, /* SNY9004, Vaio */
7447 /* _HID list for quirk detection. Any device below has _CID from psmcpnp_ids */
7448 static struct isa_pnp_id topbtpad_ids[] = {
7449 { 0x1700ae30, "Lenovo PS/2 clickpad port" }, /* LEN0017, ThinkPad */
7450 { 0x1800ae30, "Lenovo PS/2 clickpad port" }, /* LEN0018, ThinkPad */
7451 { 0x1900ae30, "Lenovo PS/2 clickpad port" }, /* LEN0019, ThinkPad */
7452 { 0x2300ae30, "Lenovo PS/2 clickpad port" }, /* LEN0023, ThinkPad */
7453 { 0x2a00ae30, "Lenovo PS/2 clickpad port" }, /* LEN002a, ThinkPad */
7454 { 0x2b00ae30, "Lenovo PS/2 clickpad port" }, /* LEN002b, ThinkPad */
7455 { 0x2c00ae30, "Lenovo PS/2 clickpad port" }, /* LEN002c, ThinkPad */
7456 { 0x2d00ae30, "Lenovo PS/2 clickpad port" }, /* LEN002d, ThinkPad */
7457 { 0x2e00ae30, "Lenovo PS/2 clickpad port" }, /* LEN002e, ThinkPad */
7458 { 0x3300ae30, "Lenovo PS/2 clickpad port" }, /* LEN0033, ThinkPad */
7459 { 0x3400ae30, "Lenovo PS/2 clickpad port" }, /* LEN0034, ThinkPad */
7460 { 0x3500ae30, "Lenovo PS/2 clickpad port" }, /* LEN0035, ThinkPad */
7461 { 0x3600ae30, "Lenovo PS/2 clickpad port" }, /* LEN0036, ThinkPad */
7462 { 0x3700ae30, "Lenovo PS/2 clickpad port" }, /* LEN0037, ThinkPad */
7463 { 0x3800ae30, "Lenovo PS/2 clickpad port" }, /* LEN0038, ThinkPad */
7464 { 0x3900ae30, "Lenovo PS/2 clickpad port" }, /* LEN0039, ThinkPad */
7465 { 0x4100ae30, "Lenovo PS/2 clickpad port" }, /* LEN0041, ThinkPad */
7466 { 0x4200ae30, "Lenovo PS/2 clickpad port" }, /* LEN0042, ThinkPad */
7467 { 0x4500ae30, "Lenovo PS/2 clickpad port" }, /* LEN0045, ThinkPad */
7468 { 0x4700ae30, "Lenovo PS/2 clickpad port" }, /* LEN0047, ThinkPad */
7469 { 0x4900ae30, "Lenovo PS/2 clickpad port" }, /* LEN0049, ThinkPad */
7470 { 0x0020ae30, "Lenovo PS/2 clickpad port" }, /* LEN2000, ThinkPad */
7471 { 0x0120ae30, "Lenovo PS/2 clickpad port" }, /* LEN2001, ThinkPad */
7472 { 0x0220ae30, "Lenovo PS/2 clickpad port" }, /* LEN2002, ThinkPad */
7473 { 0x0320ae30, "Lenovo PS/2 clickpad port" }, /* LEN2003, ThinkPad */
7474 { 0x0420ae30, "Lenovo PS/2 clickpad port" }, /* LEN2004, ThinkPad */
7475 { 0x0520ae30, "Lenovo PS/2 clickpad port" }, /* LEN2005, ThinkPad */
7476 { 0x0620ae30, "Lenovo PS/2 clickpad port" }, /* LEN2006, ThinkPad */
7477 { 0x0720ae30, "Lenovo PS/2 clickpad port" }, /* LEN2007, ThinkPad */
7478 { 0x0820ae30, "Lenovo PS/2 clickpad port" }, /* LEN2008, ThinkPad */
7479 { 0x0920ae30, "Lenovo PS/2 clickpad port" }, /* LEN2009, ThinkPad */
7480 { 0x0a20ae30, "Lenovo PS/2 clickpad port" }, /* LEN200a, ThinkPad */
7481 { 0x0b20ae30, "Lenovo PS/2 clickpad port" }, /* LEN200b, ThinkPad */
7485 /* _HID list for quirk detection. Any device below has _CID from psmcpnp_ids */
7486 static struct isa_pnp_id forcepad_ids[] = {
7487 { 0x0d302e4f, "HP PS/2 forcepad port" }, /* SYN300D, EB 1040 */
7488 { 0x14302e4f, "HP PS/2 forcepad port" }, /* SYN3014, EB 1040 */
7493 create_a_copy(device_t atkbdc, device_t me)
7498 /* find the PS/2 mouse device instance under the keyboard controller */
7499 psm = device_find_child(atkbdc, PSM_DRIVER_NAME,
7500 device_get_unit(atkbdc));
7503 if (device_get_state(psm) != DS_NOTPRESENT)
7506 /* move our resource to the found device */
7507 irq = bus_get_resource_start(me, SYS_RES_IRQ, 0);
7508 bus_delete_resource(me, SYS_RES_IRQ, 0);
7509 bus_set_resource(psm, SYS_RES_IRQ, KBDC_RID_AUX, irq, 1);
7511 /* ...then probe and attach it */
7512 return (device_probe_and_attach(psm));
7516 psmcpnp_probe(device_t dev)
7518 struct psmcpnp_softc *sc = device_get_softc(dev);
7519 struct resource *res;
7523 if (ISA_PNP_PROBE(device_get_parent(dev), dev, forcepad_ids) == 0)
7524 sc->type = PSMCPNP_FORCEPAD;
7525 else if (ISA_PNP_PROBE(device_get_parent(dev), dev, topbtpad_ids) == 0)
7526 sc->type = PSMCPNP_TOPBUTTONPAD;
7527 else if (ISA_PNP_PROBE(device_get_parent(dev), dev, psmcpnp_ids) == 0)
7528 sc->type = PSMCPNP_GENERIC;
7533 * The PnP BIOS and ACPI are supposed to assign an IRQ (12)
7534 * to the PS/2 mouse device node. But, some buggy PnP BIOS
7535 * declares the PS/2 mouse device node without an IRQ resource!
7536 * If this happens, we shall refer to device hints.
7537 * If we still don't find it there, use a hardcoded value... XXX
7540 irq = bus_get_resource_start(dev, SYS_RES_IRQ, rid);
7542 if (resource_long_value(PSM_DRIVER_NAME,
7543 device_get_unit(dev),"irq", &irq) != 0)
7545 device_printf(dev, "irq resource info is missing; "
7546 "assuming irq %ld\n", irq);
7547 bus_set_resource(dev, SYS_RES_IRQ, rid, irq, 1);
7549 res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 0);
7550 bus_release_resource(dev, SYS_RES_IRQ, rid, res);
7556 return ((res == NULL) ? ENXIO : 0);
7560 psmcpnp_attach(device_t dev)
7564 /* find the keyboard controller, which may be on acpi* or isa* bus */
7565 atkbdc = devclass_get_device(devclass_find(ATKBDC_DRIVER_NAME),
7566 device_get_unit(dev));
7567 if ((atkbdc != NULL) && (device_get_state(atkbdc) == DS_ATTACHED))
7568 create_a_copy(atkbdc, dev);
7573 DRIVER_MODULE(psmcpnp, isa, psmcpnp_driver, psmcpnp_devclass, 0, 0);
7574 DRIVER_MODULE(psmcpnp, acpi, psmcpnp_driver, psmcpnp_devclass, 0, 0);
7575 ISA_PNP_INFO(psmcpnp_ids);
7576 #endif /* DEV_ISA */