2 * Copyright (c) 2007-2014 QLogic Corporation. All rights reserved.
4 * Redistribution and use in source and binary forms, with or without
5 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
14 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS'
15 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
18 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
19 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
20 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
21 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
22 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
23 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
24 * THE POSSIBILITY OF SUCH DAMAGE.
27 #include <sys/cdefs.h>
28 __FBSDID("$FreeBSD$");
33 /* Init operation types and structures */
35 OP_RD = 0x1, /* read a single register */
36 OP_WR, /* write a single register */
37 OP_SW, /* copy a string to the device */
38 OP_ZR, /* clear memory */
39 OP_ZP, /* unzip then copy with DMAE */
40 OP_WR_64, /* write 64 bit pattern */
41 OP_WB, /* copy a string using DMAE */
42 #ifndef FW_ZIP_SUPPORT
43 OP_FW, /* copy an array from fw data (only used with unzipped FW) */
45 OP_WB_ZR, /* Clear a string using DMAE or indirect-wr */
46 OP_IF_MODE_OR, /* Skip the following ops if all init modes don't match */
47 OP_IF_MODE_AND, /* Skip the following ops if any init modes don't match */
60 /* Returns the index of start or end of a specific block stage in ops array*/
61 #define BLOCK_OPS_IDX(block, stage, end) \
62 (2*(((block)*NUM_OF_INIT_PHASES) + (stage)) + (end))
65 /* structs for the various opcodes */
90 #else /* __LITTLE_ENDIAN */
104 uint32_t cmd_offset:24;
105 uint32_t mode_bit_map;
110 uint32_t cmd_offset:24;
111 uint32_t phase_bit_map;
116 uint32_t reserved:24;
122 struct op_write write;
123 struct op_arr_write arr_wr;
126 struct op_if_mode if_mode;
127 struct op_if_phase if_phase;
128 struct op_delay delay;
150 MODE_ASIC = 0x00000001,
151 MODE_FPGA = 0x00000002,
152 MODE_EMUL = 0x00000004,
153 MODE_E2 = 0x00000008,
154 MODE_E3 = 0x00000010,
155 MODE_PORT2 = 0x00000020,
156 MODE_PORT4 = 0x00000040,
157 MODE_SF = 0x00000080,
158 MODE_MF = 0x00000100,
159 MODE_MF_SD = 0x00000200,
160 MODE_MF_SI = 0x00000400,
161 MODE_MF_AFEX = 0x00000800,
162 MODE_E3_A0 = 0x00001000,
163 MODE_E3_B0 = 0x00002000,
164 MODE_COS3 = 0x00004000,
165 MODE_COS6 = 0x00008000,
166 MODE_LITTLE_ENDIAN = 0x00010000,
167 MODE_BIG_ENDIAN = 0x00020000,
217 #define ECORE_PORT2_MODE_NUM_VNICS 4
220 /* QM queue numbers */
221 #define ECORE_ETH_Q 0
222 #define ECORE_TOE_Q 3
223 #define ECORE_TOE_ACK_Q 6
224 #define ECORE_ISCSI_Q 9
225 #define ECORE_ISCSI_ACK_Q 11
226 #define ECORE_FCOE_Q 10
229 #define ECORE_PORT4_MODE_NUM_VNICS 2
231 /* COS offset for port1 in E3 B0 4port mode */
232 #define ECORE_E3B0_PORT1_COS_OFFSET 3
234 /* QM Register addresses */
235 #define ECORE_Q_VOQ_REG_ADDR(pf_q_num)\
236 (QM_REG_QVOQIDX_0 + 4 * (pf_q_num))
237 #define ECORE_VOQ_Q_REG_ADDR(cos, pf_q_num)\
238 (QM_REG_VOQQMASK_0_LSB + 4 * ((cos) * 2 + ((pf_q_num) >> 5)))
239 #define ECORE_Q_CMDQ_REG_ADDR(pf_q_num)\
240 (QM_REG_BYTECRDCMDQ_0 + 4 * ((pf_q_num) >> 4))
242 /* extracts the QM queue number for the specified port and vnic */
243 #define ECORE_PF_Q_NUM(q_num, port, vnic)\
244 ((((port) << 1) | (vnic)) * 16 + (q_num))
247 /* Maps the specified queue to the specified COS */
248 static inline void ecore_map_q_cos(struct bxe_softc *sc, uint32_t q_num, uint32_t new_cos)
250 /* find current COS mapping */
251 uint32_t curr_cos = REG_RD(sc, QM_REG_QVOQIDX_0 + q_num * 4);
253 /* check if queue->COS mapping has changed */
254 if (curr_cos != new_cos) {
255 uint32_t num_vnics = ECORE_PORT2_MODE_NUM_VNICS;
256 uint32_t reg_addr, reg_bit_map, vnic;
258 /* update parameters for 4port mode */
259 if (INIT_MODE_FLAGS(sc) & MODE_PORT4) {
260 num_vnics = ECORE_PORT4_MODE_NUM_VNICS;
262 curr_cos += ECORE_E3B0_PORT1_COS_OFFSET;
263 new_cos += ECORE_E3B0_PORT1_COS_OFFSET;
267 /* change queue mapping for each VNIC */
268 for (vnic = 0; vnic < num_vnics; vnic++) {
270 ECORE_PF_Q_NUM(q_num, PORT_ID(sc), vnic);
271 uint32_t q_bit_map = 1 << (pf_q_num & 0x1f);
273 /* overwrite queue->VOQ mapping */
274 REG_WR(sc, ECORE_Q_VOQ_REG_ADDR(pf_q_num), new_cos);
276 /* clear queue bit from current COS bit map */
277 reg_addr = ECORE_VOQ_Q_REG_ADDR(curr_cos, pf_q_num);
278 reg_bit_map = REG_RD(sc, reg_addr);
279 REG_WR(sc, reg_addr, reg_bit_map & (~q_bit_map));
281 /* set queue bit in new COS bit map */
282 reg_addr = ECORE_VOQ_Q_REG_ADDR(new_cos, pf_q_num);
283 reg_bit_map = REG_RD(sc, reg_addr);
284 REG_WR(sc, reg_addr, reg_bit_map | q_bit_map);
286 /* set/clear queue bit in command-queue bit map
287 (E2/E3A0 only, valid COS values are 0/1) */
288 if (!(INIT_MODE_FLAGS(sc) & MODE_E3_B0)) {
289 reg_addr = ECORE_Q_CMDQ_REG_ADDR(pf_q_num);
290 reg_bit_map = REG_RD(sc, reg_addr);
291 q_bit_map = 1 << (2 * (pf_q_num & 0xf));
292 reg_bit_map = new_cos ?
293 (reg_bit_map | q_bit_map) :
294 (reg_bit_map & (~q_bit_map));
295 REG_WR(sc, reg_addr, reg_bit_map);
301 /* Configures the QM according to the specified per-traffic-type COSes */
302 static inline void ecore_dcb_config_qm(struct bxe_softc *sc, enum cos_mode mode,
303 struct priority_cos *traffic_cos)
305 ecore_map_q_cos(sc, ECORE_FCOE_Q,
306 traffic_cos[LLFC_TRAFFIC_TYPE_FCOE].cos);
307 ecore_map_q_cos(sc, ECORE_ISCSI_Q,
308 traffic_cos[LLFC_TRAFFIC_TYPE_ISCSI].cos);
309 ecore_map_q_cos(sc, ECORE_ISCSI_ACK_Q,
310 traffic_cos[LLFC_TRAFFIC_TYPE_ISCSI].cos);
311 if (mode != STATIC_COS) {
312 /* required only in OVERRIDE_COS mode */
313 ecore_map_q_cos(sc, ECORE_ETH_Q,
314 traffic_cos[LLFC_TRAFFIC_TYPE_NW].cos);
315 ecore_map_q_cos(sc, ECORE_TOE_Q,
316 traffic_cos[LLFC_TRAFFIC_TYPE_NW].cos);
317 ecore_map_q_cos(sc, ECORE_TOE_ACK_Q,
318 traffic_cos[LLFC_TRAFFIC_TYPE_NW].cos);
324 * congestion managment port init api description
325 * the api works as follows:
326 * the driver should pass the cmng_init_input struct, the port_init function
327 * will prepare the required internal ram structure which will be passed back
328 * to the driver (cmng_init) that will write it into the internal ram.
331 * 1. the cmng_init struct does not represent the contiguous internal ram
332 * structure. the driver should use the XSTORM_CMNG_PERPORT_VARS_OFFSET
333 * offset in order to write the port sub struct and the
334 * PFID_FROM_PORT_AND_VNIC offset for writing the vnic sub struct (in other
335 * words - don't use memcpy!).
336 * 2. although the cmng_init struct is filled for the maximal vnic number
337 * possible, the driver should only write the valid vnics into the internal
338 * ram according to the appropriate port mode.
340 #define BITS_TO_BYTES(x) ((x)/8)
342 /* CMNG constants, as derived from system spec calculations */
344 /* default MIN rate in case VNIC min rate is configured to zero- 100Mbps */
345 #define DEF_MIN_RATE 100
347 /* resolution of the rate shaping timer - 400 usec */
348 #define RS_PERIODIC_TIMEOUT_USEC 400
351 * number of bytes in single QM arbitration cycle -
352 * coefficient for calculating the fairness timer
354 #define QM_ARB_BYTES 160000
356 /* resolution of Min algorithm 1:100 */
360 * how many bytes above threshold for
361 * the minimal credit of Min algorithm
363 #define MIN_ABOVE_THRESH 32768
366 * Fairness algorithm integration time coefficient -
367 * for calculating the actual Tfair
369 #define T_FAIR_COEF ((MIN_ABOVE_THRESH + QM_ARB_BYTES) * 8 * MIN_RES)
371 /* Memory of fairness algorithm - 2 cycles */
373 #define SAFC_TIMEOUT_USEC 52
378 static inline void ecore_init_max(const struct cmng_init_input *input_data,
379 uint32_t r_param, struct cmng_init *ram_data)
382 struct cmng_vnic *vdata = &ram_data->vnic;
383 struct cmng_struct_per_port *pdata = &ram_data->port;
385 * rate shaping per-port variables
386 * 100 micro seconds in SDM ticks = 25
387 * since each tick is 4 microSeconds
390 pdata->rs_vars.rs_periodic_timeout =
391 RS_PERIODIC_TIMEOUT_USEC / SDM_TICKS;
393 /* this is the threshold below which no timer arming will occur.
394 * 1.25 coefficient is for the threshold to be a little bigger
395 * then the real time to compensate for timer in-accuracy
397 pdata->rs_vars.rs_threshold =
398 (5 * RS_PERIODIC_TIMEOUT_USEC * r_param)/4;
400 /* rate shaping per-vnic variables */
401 for (vnic = 0; vnic < ECORE_PORT2_MODE_NUM_VNICS; vnic++) {
402 /* global vnic counter */
403 vdata->vnic_max_rate[vnic].vn_counter.rate =
404 input_data->vnic_max_rate[vnic];
406 * maximal Mbps for this vnic
407 * the quota in each timer period - number of bytes
408 * transmitted in this period
410 vdata->vnic_max_rate[vnic].vn_counter.quota =
411 RS_PERIODIC_TIMEOUT_USEC *
412 (uint32_t)vdata->vnic_max_rate[vnic].vn_counter.rate / 8;
417 static inline void ecore_init_max_per_vn(uint16_t vnic_max_rate,
418 struct rate_shaping_vars_per_vn *ram_data)
420 /* global vnic counter */
421 ram_data->vn_counter.rate = vnic_max_rate;
424 * maximal Mbps for this vnic
425 * the quota in each timer period - number of bytes
426 * transmitted in this period
428 ram_data->vn_counter.quota =
429 RS_PERIODIC_TIMEOUT_USEC * (uint32_t)vnic_max_rate / 8;
432 static inline void ecore_init_min(const struct cmng_init_input *input_data,
433 uint32_t r_param, struct cmng_init *ram_data)
435 uint32_t vnic, fair_periodic_timeout_usec, vnicWeightSum, tFair;
436 struct cmng_vnic *vdata = &ram_data->vnic;
437 struct cmng_struct_per_port *pdata = &ram_data->port;
439 /* this is the resolution of the fairness timer */
440 fair_periodic_timeout_usec = QM_ARB_BYTES / r_param;
443 * fairness per-port variables
444 * for 10G it is 1000usec. for 1G it is 10000usec.
446 tFair = T_FAIR_COEF / input_data->port_rate;
448 /* this is the threshold below which we won't arm the timer anymore */
449 pdata->fair_vars.fair_threshold = QM_ARB_BYTES;
452 * we multiply by 1e3/8 to get bytes/msec. We don't want the credits
453 * to pass a credit of the T_FAIR*FAIR_MEM (algorithm resolution)
455 pdata->fair_vars.upper_bound = r_param * tFair * FAIR_MEM;
457 /* since each tick is 4 microSeconds */
458 pdata->fair_vars.fairness_timeout =
459 fair_periodic_timeout_usec / SDM_TICKS;
461 /* calculate sum of weights */
464 for (vnic = 0; vnic < ECORE_PORT2_MODE_NUM_VNICS; vnic++)
465 vnicWeightSum += input_data->vnic_min_rate[vnic];
467 /* global vnic counter */
468 if (vnicWeightSum > 0) {
469 /* fairness per-vnic variables */
470 for (vnic = 0; vnic < ECORE_PORT2_MODE_NUM_VNICS; vnic++) {
472 * this is the credit for each period of the fairness
473 * algorithm - number of bytes in T_FAIR (this vnic
474 * share of the port rate)
476 vdata->vnic_min_rate[vnic].vn_credit_delta =
477 ((uint32_t)(input_data->vnic_min_rate[vnic]) * 100 *
478 (T_FAIR_COEF / (8 * 100 * vnicWeightSum)));
479 if (vdata->vnic_min_rate[vnic].vn_credit_delta <
480 pdata->fair_vars.fair_threshold +
482 vdata->vnic_min_rate[vnic].vn_credit_delta =
483 pdata->fair_vars.fair_threshold +
490 static inline void ecore_init_fw_wrr(const struct cmng_init_input *input_data,
491 uint32_t r_param, struct cmng_init *ram_data)
494 uint32_t cosWeightSum = 0;
495 struct cmng_vnic *vdata = &ram_data->vnic;
496 struct cmng_struct_per_port *pdata = &ram_data->port;
498 for (cos = 0; cos < MAX_COS_NUMBER; cos++)
499 cosWeightSum += input_data->cos_min_rate[cos];
501 if (cosWeightSum > 0) {
503 for (vnic = 0; vnic < ECORE_PORT2_MODE_NUM_VNICS; vnic++) {
505 * Since cos and vnic shouldn't work together the rate
506 * to divide between the coses is the port rate.
508 uint32_t *ccd = vdata->vnic_min_rate[vnic].cos_credit_delta;
509 for (cos = 0; cos < MAX_COS_NUMBER; cos++) {
511 * this is the credit for each period of
512 * the fairness algorithm - number of bytes
513 * in T_FAIR (this cos share of the vnic rate)
516 ((uint32_t)input_data->cos_min_rate[cos] * 100 *
517 (T_FAIR_COEF / (8 * 100 * cosWeightSum)));
518 if (ccd[cos] < pdata->fair_vars.fair_threshold
519 + MIN_ABOVE_THRESH) {
521 pdata->fair_vars.fair_threshold +
529 static inline void ecore_init_safc(const struct cmng_init_input *input_data,
530 struct cmng_init *ram_data)
532 /* in microSeconds */
533 ram_data->port.safc_vars.safc_timeout_usec = SAFC_TIMEOUT_USEC;
536 /* Congestion management port init */
537 static inline void ecore_init_cmng(const struct cmng_init_input *input_data,
538 struct cmng_init *ram_data)
541 ECORE_MEMSET(ram_data, 0,sizeof(struct cmng_init));
543 ram_data->port.flags = input_data->flags;
546 * number of bytes transmitted in a rate of 10Gbps
547 * in one usec = 1.25KB.
549 r_param = BITS_TO_BYTES(input_data->port_rate);
550 ecore_init_max(input_data, r_param, ram_data);
551 ecore_init_min(input_data, r_param, ram_data);
552 ecore_init_fw_wrr(input_data, r_param, ram_data);
553 ecore_init_safc(input_data, ram_data);
559 /* Returns the index of start or end of a specific block stage in ops array*/
560 #define BLOCK_OPS_IDX(block, stage, end) \
561 (2*(((block)*NUM_OF_INIT_PHASES) + (stage)) + (end))
564 #define INITOP_SET 0 /* set the HW directly */
565 #define INITOP_CLEAR 1 /* clear the HW directly */
566 #define INITOP_INIT 2 /* set the init-value array */
568 /****************************************************************************
570 ****************************************************************************/
572 ecore_dma_addr_t page_mapping;
577 struct ilt_client_info {
583 #define ILT_CLIENT_SKIP_INIT 0x1
584 #define ILT_CLIENT_SKIP_MEM 0x2
589 struct ilt_line *lines;
590 struct ilt_client_info clients[4];
591 #define ILT_CLIENT_CDU 0
592 #define ILT_CLIENT_QM 1
593 #define ILT_CLIENT_SRC 2
594 #define ILT_CLIENT_TM 3
597 /****************************************************************************
599 ****************************************************************************/
605 /****************************************************************************
606 * Parity configuration
607 ****************************************************************************/
608 #define BLOCK_PRTY_INFO(block, en_mask, m1, m1h, m2, m3) \
610 block##_REG_##block##_PRTY_MASK, \
611 block##_REG_##block##_PRTY_STS_CLR, \
612 en_mask, {m1, m1h, m2, m3}, #block \
615 #define BLOCK_PRTY_INFO_0(block, en_mask, m1, m1h, m2, m3) \
617 block##_REG_##block##_PRTY_MASK_0, \
618 block##_REG_##block##_PRTY_STS_CLR_0, \
619 en_mask, {m1, m1h, m2, m3}, #block"_0" \
622 #define BLOCK_PRTY_INFO_1(block, en_mask, m1, m1h, m2, m3) \
624 block##_REG_##block##_PRTY_MASK_1, \
625 block##_REG_##block##_PRTY_STS_CLR_1, \
626 en_mask, {m1, m1h, m2, m3}, #block"_1" \
629 static const struct {
631 uint32_t sts_clr_addr;
632 uint32_t en_mask; /* Mask to enable parity attentions */
634 uint32_t e1; /* 57710 */
635 uint32_t e1h; /* 57711 */
636 uint32_t e2; /* 57712 */
637 uint32_t e3; /* 578xx */
638 } reg_mask; /* Register mask (all valid bits) */
639 char name[8]; /* Block's longest name is 7 characters long
642 } ecore_blocks_parity_data[] = {
644 /* REG_WR(bp, PXP_REG_PXP_PRTY_MASK, 0x80000); */
646 /* REG_WR(bp, PXP2_REG_PXP2_PRTY_MASK_0, 0xfff40020); */
648 /* REG_WR(bp, PXP2_REG_PXP2_PRTY_MASK_1, 0x20); */
649 /* REG_WR(bp, HC_REG_HC_PRTY_MASK, 0x0); */
650 /* REG_WR(bp, MISC_REG_MISC_PRTY_MASK, 0x0); */
652 /* Block IGU, MISC, PXP and PXP2 parity errors as long as we don't
653 * want to handle "system kill" flow at the moment.
655 BLOCK_PRTY_INFO(PXP, 0x7ffffff, 0x3ffffff, 0x3ffffff, 0x7ffffff,
657 BLOCK_PRTY_INFO_0(PXP2, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
659 BLOCK_PRTY_INFO_1(PXP2, 0x1ffffff, 0x7f, 0x7f, 0x7ff, 0x1ffffff),
660 BLOCK_PRTY_INFO(HC, 0x7, 0x7, 0x7, 0, 0),
661 BLOCK_PRTY_INFO(NIG, 0xffffffff, 0x3fffffff, 0xffffffff, 0, 0),
662 BLOCK_PRTY_INFO_0(NIG, 0xffffffff, 0, 0, 0xffffffff, 0xffffffff),
663 BLOCK_PRTY_INFO_1(NIG, 0xffff, 0, 0, 0xff, 0xffff),
664 BLOCK_PRTY_INFO(IGU, 0x7ff, 0, 0, 0x7ff, 0x7ff),
665 BLOCK_PRTY_INFO(MISC, 0x1, 0x1, 0x1, 0x1, 0x1),
666 BLOCK_PRTY_INFO(QM, 0, 0x1ff, 0xfff, 0xfff, 0xfff),
667 BLOCK_PRTY_INFO(ATC, 0x1f, 0, 0, 0x1f, 0x1f),
668 BLOCK_PRTY_INFO(PGLUE_B, 0x3, 0, 0, 0x3, 0x3),
669 BLOCK_PRTY_INFO(DORQ, 0, 0x3, 0x3, 0x3, 0x3),
670 {GRCBASE_UPB + PB_REG_PB_PRTY_MASK,
671 GRCBASE_UPB + PB_REG_PB_PRTY_STS_CLR, 0xf,
672 {0xf, 0xf, 0xf, 0xf}, "UPB"},
673 {GRCBASE_XPB + PB_REG_PB_PRTY_MASK,
674 GRCBASE_XPB + PB_REG_PB_PRTY_STS_CLR, 0,
675 {0xf, 0xf, 0xf, 0xf}, "XPB"},
676 BLOCK_PRTY_INFO(SRC, 0x4, 0x7, 0x7, 0x7, 0x7),
677 BLOCK_PRTY_INFO(CDU, 0, 0x1f, 0x1f, 0x1f, 0x1f),
678 BLOCK_PRTY_INFO(CFC, 0, 0xf, 0xf, 0xf, 0x3f),
679 BLOCK_PRTY_INFO(DBG, 0, 0x1, 0x1, 0x1, 0x1),
680 BLOCK_PRTY_INFO(DMAE, 0, 0xf, 0xf, 0xf, 0xf),
681 BLOCK_PRTY_INFO(BRB1, 0, 0xf, 0xf, 0xf, 0xf),
682 BLOCK_PRTY_INFO(PRS, (1<<6), 0xff, 0xff, 0xff, 0xff),
683 BLOCK_PRTY_INFO(PBF, 0, 0, 0x3ffff, 0xfffff, 0xfffffff),
684 BLOCK_PRTY_INFO(TM, 0, 0, 0x7f, 0x7f, 0x7f),
685 BLOCK_PRTY_INFO(TSDM, 0x18, 0x7ff, 0x7ff, 0x7ff, 0x7ff),
686 BLOCK_PRTY_INFO(CSDM, 0x8, 0x7ff, 0x7ff, 0x7ff, 0x7ff),
687 BLOCK_PRTY_INFO(USDM, 0x38, 0x7ff, 0x7ff, 0x7ff, 0x7ff),
688 BLOCK_PRTY_INFO(XSDM, 0x8, 0x7ff, 0x7ff, 0x7ff, 0x7ff),
689 BLOCK_PRTY_INFO(TCM, 0, 0, 0x7ffffff, 0x7ffffff, 0x7ffffff),
690 BLOCK_PRTY_INFO(CCM, 0, 0, 0x7ffffff, 0x7ffffff, 0x7ffffff),
691 BLOCK_PRTY_INFO(UCM, 0, 0, 0x7ffffff, 0x7ffffff, 0x7ffffff),
692 BLOCK_PRTY_INFO(XCM, 0, 0, 0x3fffffff, 0x3fffffff, 0x3fffffff),
693 BLOCK_PRTY_INFO_0(TSEM, 0, 0xffffffff, 0xffffffff, 0xffffffff,
695 BLOCK_PRTY_INFO_1(TSEM, 0, 0x3, 0x1f, 0x3f, 0x3f),
696 BLOCK_PRTY_INFO_0(USEM, 0, 0xffffffff, 0xffffffff, 0xffffffff,
698 BLOCK_PRTY_INFO_1(USEM, 0, 0x3, 0x1f, 0x1f, 0x1f),
699 BLOCK_PRTY_INFO_0(CSEM, 0, 0xffffffff, 0xffffffff, 0xffffffff,
701 BLOCK_PRTY_INFO_1(CSEM, 0, 0x3, 0x1f, 0x1f, 0x1f),
702 BLOCK_PRTY_INFO_0(XSEM, 0, 0xffffffff, 0xffffffff, 0xffffffff,
704 BLOCK_PRTY_INFO_1(XSEM, 0, 0x3, 0x1f, 0x3f, 0x3f),
708 /* [28] MCP Latched rom_parity
709 * [29] MCP Latched ump_rx_parity
710 * [30] MCP Latched ump_tx_parity
711 * [31] MCP Latched scpad_parity
713 #define MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS \
714 (AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY | \
715 AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY | \
716 AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY)
718 #define MISC_AEU_ENABLE_MCP_PRTY_BITS \
719 (MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS | \
720 AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY)
722 /* Below registers control the MCP parity attention output. When
723 * MISC_AEU_ENABLE_MCP_PRTY_BITS are set - attentions are
724 * enabled, when cleared - disabled.
726 static const struct {
729 } mcp_attn_ctl_regs[] = {
730 { MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0,
731 MISC_AEU_ENABLE_MCP_PRTY_BITS },
732 { MISC_REG_AEU_ENABLE4_NIG_0,
733 MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS },
734 { MISC_REG_AEU_ENABLE4_PXP_0,
735 MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS },
736 { MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0,
737 MISC_AEU_ENABLE_MCP_PRTY_BITS },
738 { MISC_REG_AEU_ENABLE4_NIG_1,
739 MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS },
740 { MISC_REG_AEU_ENABLE4_PXP_1,
741 MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS }
744 static inline void ecore_set_mcp_parity(struct bxe_softc *sc, uint8_t enable)
749 for (i = 0; i < ARRSIZE(mcp_attn_ctl_regs); i++) {
750 reg_val = REG_RD(sc, mcp_attn_ctl_regs[i].addr);
753 reg_val |= MISC_AEU_ENABLE_MCP_PRTY_BITS; /* Linux is using mcp_attn_ctl_regs[i].bits */
755 reg_val &= ~MISC_AEU_ENABLE_MCP_PRTY_BITS; /* Linux is using mcp_attn_ctl_regs[i].bits */
757 REG_WR(sc, mcp_attn_ctl_regs[i].addr, reg_val);
761 static inline uint32_t ecore_parity_reg_mask(struct bxe_softc *sc, int idx)
764 return ecore_blocks_parity_data[idx].reg_mask.e1;
765 else if (CHIP_IS_E1H(sc))
766 return ecore_blocks_parity_data[idx].reg_mask.e1h;
767 else if (CHIP_IS_E2(sc))
768 return ecore_blocks_parity_data[idx].reg_mask.e2;
769 else /* CHIP_IS_E3 */
770 return ecore_blocks_parity_data[idx].reg_mask.e3;
773 static inline void ecore_disable_blocks_parity(struct bxe_softc *sc)
777 for (i = 0; i < ARRSIZE(ecore_blocks_parity_data); i++) {
778 uint32_t dis_mask = ecore_parity_reg_mask(sc, i);
781 REG_WR(sc, ecore_blocks_parity_data[i].mask_addr,
783 ECORE_MSG(sc, "Setting parity mask "
784 "for %s to\t\t0x%x\n",
785 ecore_blocks_parity_data[i].name, dis_mask);
789 /* Disable MCP parity attentions */
790 ecore_set_mcp_parity(sc, FALSE);
794 * Clear the parity error status registers.
796 static inline void ecore_clear_blocks_parity(struct bxe_softc *sc)
799 uint32_t reg_val, mcp_aeu_bits =
800 AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY |
801 AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY |
802 AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY |
803 AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY;
805 /* Clear SEM_FAST parities */
806 REG_WR(sc, XSEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1);
807 REG_WR(sc, TSEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1);
808 REG_WR(sc, USEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1);
809 REG_WR(sc, CSEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1);
811 for (i = 0; i < ARRSIZE(ecore_blocks_parity_data); i++) {
812 uint32_t reg_mask = ecore_parity_reg_mask(sc, i);
815 reg_val = REG_RD(sc, ecore_blocks_parity_data[i].
817 if (reg_val & reg_mask)
819 "Parity errors in %s: 0x%x\n",
820 ecore_blocks_parity_data[i].name,
825 /* Check if there were parity attentions in MCP */
826 reg_val = REG_RD(sc, MISC_REG_AEU_AFTER_INVERT_4_MCP);
827 if (reg_val & mcp_aeu_bits)
828 ECORE_MSG(sc, "Parity error in MCP: 0x%x\n",
829 reg_val & mcp_aeu_bits);
831 /* Clear parity attentions in MCP:
832 * [7] clears Latched rom_parity
833 * [8] clears Latched ump_rx_parity
834 * [9] clears Latched ump_tx_parity
835 * [10] clears Latched scpad_parity (both ports)
837 REG_WR(sc, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x780);
840 static inline void ecore_enable_blocks_parity(struct bxe_softc *sc)
844 for (i = 0; i < ARRSIZE(ecore_blocks_parity_data); i++) {
845 uint32_t reg_mask = ecore_parity_reg_mask(sc, i);
848 REG_WR(sc, ecore_blocks_parity_data[i].mask_addr,
849 ecore_blocks_parity_data[i].en_mask & reg_mask);
852 /* Enable MCP parity attentions */
853 ecore_set_mcp_parity(sc, TRUE);
857 #endif /* ECORE_INIT_H */