2 * Copyright (c) 2001 Michael Smith
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30 * CISS adapter driver datastructures
33 typedef STAILQ_HEAD(, ciss_request) cr_qhead_t;
35 /************************************************************************
40 * There is no guaranteed upper bound on the number of concurrent
41 * commands an adapter may claim to support. Cap it at a reasonable
44 #define CISS_MAX_REQUESTS 1024
47 * Maximum number of logical drives we support.
48 * If the controller does not indicate a maximum
49 * value. This is a compatibiliy value to support
50 * older ciss controllers (e.g. model 6i)
52 #define CISS_MAX_LOGICAL 16
55 * Maximum number of physical devices we support.
57 #define CISS_MAX_PHYSICAL 1024
60 * Interrupt reduction can be controlled by tuning the interrupt
61 * coalesce delay and count parameters. The delay (in microseconds)
62 * defers delivery of interrupts to increase the chance of there being
63 * more than one completed command ready when the interrupt is
64 * delivered. The count expedites the delivery of the interrupt when
65 * the given number of commands are ready.
67 * If the delay is set to 0, interrupts are delivered immediately.
69 #define CISS_INTERRUPT_COALESCE_DELAY 0
70 #define CISS_INTERRUPT_COALESCE_COUNT 16
73 * Heartbeat routine timeout in seconds. Note that since event
74 * handling is performed on a callback basis, we don't need this to
77 #define CISS_HEARTBEAT_RATE 10
79 /************************************************************************
80 * Driver version. Only really significant to the ACU interface.
82 #define CISS_DRIVER_VERSION 20011201
84 /************************************************************************
85 * Driver data structures
89 * Each command issued to the adapter is managed by a request
94 STAILQ_ENTRY(ciss_request) cr_link;
95 int cr_onq; /* which queue we are on */
97 struct ciss_softc *cr_sc; /* controller softc */
98 void *cr_data; /* data buffer */
99 u_int32_t cr_length; /* data length */
100 bus_dmamap_t cr_datamap; /* DMA map for data */
101 struct ciss_command *cr_cc;
105 #define CISS_REQ_MAPPED (1<<0) /* data mapped */
106 #define CISS_REQ_SLEEP (1<<1) /* submitter sleeping */
107 #define CISS_REQ_POLL (1<<2) /* submitter polling */
108 #define CISS_REQ_DATAOUT (1<<3) /* data host->adapter */
109 #define CISS_REQ_DATAIN (1<<4) /* data adapter->host */
110 #define CISS_REQ_BUSY (1<<5) /* controller has req */
111 #define CISS_REQ_CCB (1<<6) /* data is ccb */
113 void (* cr_complete)(struct ciss_request *);
116 #define CISS_SG_MAX ((CISS_SG_FETCH_MAX << 1) | 0x1)
117 #define CISS_SG_1 ((CISS_SG_FETCH_1 << 1) | 0x01)
118 #define CISS_SG_2 ((CISS_SG_FETCH_2 << 1) | 0x01)
119 #define CISS_SG_4 ((CISS_SG_FETCH_4 << 1) | 0x01)
120 #define CISS_SG_8 ((CISS_SG_FETCH_8 << 1) | 0x01)
121 #define CISS_SG_16 ((CISS_SG_FETCH_16 << 1) | 0x01)
122 #define CISS_SG_32 ((CISS_SG_FETCH_32 << 1) | 0x01)
123 #define CISS_SG_NONE ((CISS_SG_FETCH_NONE << 1) | 0x01)
127 * The adapter command structure is defined with a zero-length
128 * scatter/gather list size. In practise, we want space for a
129 * scatter-gather list, and we also want to avoid having commands
130 * cross page boundaries.
132 * The size of the ciss_command is 52 bytes. 65 s/g elements are reserved
133 * to allow a max i/o size of 256k. This gives a total command size of
134 * 1120 bytes, including the 32 byte alignment padding. Modern controllers
135 * seem to saturate nicely at this value.
138 #define CISS_MAX_SG_ELEMENTS 65
139 #define CISS_COMMAND_ALIGN 32
140 #define CISS_COMMAND_SG_LENGTH (sizeof(struct ciss_sg_entry) * CISS_MAX_SG_ELEMENTS)
141 #define CISS_COMMAND_ALLOC_SIZE (roundup2(sizeof(struct ciss_command) + CISS_COMMAND_SG_LENGTH, CISS_COMMAND_ALIGN))
144 * Per-logical-drive data.
148 union ciss_device_address cl_address;
149 union ciss_device_address *cl_controller;
151 #define CISS_LD_NONEXISTENT 0
152 #define CISS_LD_ONLINE 1
153 #define CISS_LD_OFFLINE 2
157 struct ciss_bmic_id_ldrive *cl_ldrive;
158 struct ciss_bmic_id_lstatus *cl_lstatus;
159 struct ciss_ldrive_geometry cl_geometry;
161 char cl_name[16]; /* device name */
165 * Per-physical-drive data
169 union ciss_device_address cp_address;
173 #define CISS_PHYSICAL_SHIFT 5
174 #define CISS_PHYSICAL_BASE (1 << CISS_PHYSICAL_SHIFT)
175 #define CISS_MAX_PHYSTGT 256
177 #define CISS_IS_PHYSICAL(bus) (bus >= CISS_PHYSICAL_BASE)
178 #define CISS_CAM_TO_PBUS(bus) (bus - CISS_PHYSICAL_BASE)
185 /* bus connections */
186 device_t ciss_dev; /* bus attachment */
187 struct cdev *ciss_dev_t; /* control device */
189 struct resource *ciss_regs_resource; /* register interface window */
190 int ciss_regs_rid; /* resource ID */
191 bus_space_handle_t ciss_regs_bhandle; /* bus space handle */
192 bus_space_tag_t ciss_regs_btag; /* bus space tag */
194 struct resource *ciss_cfg_resource; /* config struct interface window */
195 int ciss_cfg_rid; /* resource ID */
196 struct ciss_config_table *ciss_cfg; /* config table in adapter memory */
197 struct ciss_perf_config *ciss_perf; /* config table for the performant */
198 struct ciss_bmic_id_table *ciss_id; /* ID table in host memory */
199 u_int32_t ciss_heartbeat; /* last heartbeat value */
200 int ciss_heart_attack; /* number of times we have seen this value */
203 struct resource *ciss_irq_resource; /* interrupt */
204 int ciss_irq_rid[CISS_MSI_COUNT]; /* resource ID */
205 void *ciss_intr; /* interrupt handle */
207 bus_dma_tag_t ciss_parent_dmat; /* parent DMA tag */
208 bus_dma_tag_t ciss_buffer_dmat; /* data buffer/command DMA tag */
210 u_int32_t ciss_interrupt_mask; /* controller interrupt mask bits */
212 uint64_t *ciss_reply;
215 bus_dma_tag_t ciss_reply_dmat;
216 bus_dmamap_t ciss_reply_map;
217 uint32_t ciss_reply_phys;
219 int ciss_max_requests;
220 struct ciss_request ciss_request[CISS_MAX_REQUESTS]; /* requests */
221 void *ciss_command; /* command structures */
222 bus_dma_tag_t ciss_command_dmat; /* command DMA tag */
223 bus_dmamap_t ciss_command_map; /* command DMA map */
224 u_int32_t ciss_command_phys; /* command array base address */
225 cr_qhead_t ciss_free; /* requests available for reuse */
226 cr_qhead_t ciss_notify; /* requests which are defered for processing */
227 struct proc *ciss_notify_thread;
229 struct callout ciss_periodic; /* periodic event handling */
230 struct ciss_request *ciss_periodic_notify; /* notify callback request */
233 struct ciss_ldrive **ciss_logical;
234 struct ciss_pdrive **ciss_physical;
235 union ciss_device_address *ciss_controllers; /* controller address */
236 int ciss_max_bus_number; /* maximum bus number */
237 int ciss_max_logical_bus;
238 int ciss_max_physical_bus;
240 struct cam_devq *ciss_cam_devq;
241 struct cam_sim **ciss_cam_sim;
246 #define CISS_FLAG_NOTIFY_OK (1<<0) /* notify command running OK */
247 #define CISS_FLAG_CONTROL_OPEN (1<<1) /* control device is open */
248 #define CISS_FLAG_ABORTING (1<<2) /* driver is going away */
249 #define CISS_FLAG_RUNNING (1<<3) /* driver is running (interrupts usable) */
250 #define CISS_FLAG_BUSY (1<<4) /* no free commands */
252 #define CISS_FLAG_FAKE_SYNCH (1<<16) /* needs SYNCHRONISE_CACHE faked */
253 #define CISS_FLAG_BMIC_ABORT (1<<17) /* use BMIC command to abort Notify on Event */
254 #define CISS_FLAG_THREAD_SHUT (1<<20) /* shutdown the kthread */
256 struct ciss_qstat ciss_qstat[CISSQ_COUNT]; /* queue statistics */
259 /************************************************************************
260 * Debugging/diagnostic output.
265 * 0 - quiet, only emit warnings
266 * 1 - talkative, log major events, but nothing on the I/O path
267 * 2 - noisy, log events on the I/O path
268 * 3 - extremely noisy, log items in loops
271 # define debug(level, fmt, args...) \
273 if (level <= CISS_DEBUG) printf("%s: " fmt "\n", __func__ , ##args); \
275 # define debug_called(level) \
277 if (level <= CISS_DEBUG) printf("%s: called\n", __func__); \
279 # define debug_struct(s) printf(" SIZE %s: %zu\n", #s, sizeof(struct s))
280 # define debug_union(s) printf(" SIZE %s: %zu\n", #s, sizeof(union s))
281 # define debug_type(s) printf(" SIZE %s: %zu\n", #s, sizeof(s))
282 # define debug_field(s, f) printf(" OFFSET %s.%s: %d\n", #s, #f, ((int)&(((struct s *)0)->f)))
283 # define debug_const(c) printf(" CONST %s %jd/0x%jx\n", #c, (intmax_t)c, (intmax_t)c);
285 # define debug(level, fmt, args...)
286 # define debug_called(level)
287 # define debug_struct(s)
288 # define debug_union(s)
289 # define debug_type(s)
290 # define debug_field(s, f)
291 # define debug_const(c)
294 #define ciss_printf(sc, fmt, args...) device_printf(sc->ciss_dev, fmt , ##args)
296 /************************************************************************
300 #define CISSQ_ADD(sc, qname) \
302 struct ciss_qstat *qs = &(sc)->ciss_qstat[qname]; \
305 if (qs->q_length > qs->q_max) \
306 qs->q_max = qs->q_length; \
309 #define CISSQ_REMOVE(sc, qname) (sc)->ciss_qstat[qname].q_length--
310 #define CISSQ_INIT(sc, qname) \
312 sc->ciss_qstat[qname].q_length = 0; \
313 sc->ciss_qstat[qname].q_max = 0; \
317 #define CISSQ_REQUEST_QUEUE(name, index) \
318 static __inline void \
319 ciss_initq_ ## name (struct ciss_softc *sc) \
321 STAILQ_INIT(&sc->ciss_ ## name); \
322 CISSQ_INIT(sc, index); \
324 static __inline void \
325 ciss_enqueue_ ## name (struct ciss_request *cr) \
328 STAILQ_INSERT_TAIL(&cr->cr_sc->ciss_ ## name, cr, cr_link); \
329 CISSQ_ADD(cr->cr_sc, index); \
330 cr->cr_onq = index; \
332 static __inline void \
333 ciss_requeue_ ## name (struct ciss_request *cr) \
336 STAILQ_INSERT_HEAD(&cr->cr_sc->ciss_ ## name, cr, cr_link); \
337 CISSQ_ADD(cr->cr_sc, index); \
338 cr->cr_onq = index; \
340 static __inline struct ciss_request * \
341 ciss_dequeue_ ## name (struct ciss_softc *sc) \
343 struct ciss_request *cr; \
345 if ((cr = STAILQ_FIRST(&sc->ciss_ ## name)) != NULL) { \
346 STAILQ_REMOVE_HEAD(&sc->ciss_ ## name, cr_link); \
347 CISSQ_REMOVE(sc, index); \
354 CISSQ_REQUEST_QUEUE(free, CISSQ_FREE);
355 CISSQ_REQUEST_QUEUE(notify, CISSQ_NOTIFY);
358 ciss_enqueue_complete(struct ciss_request *ac, cr_qhead_t *head)
361 STAILQ_INSERT_TAIL(head, ac, cr_link);
364 static __inline struct ciss_request *
365 ciss_dequeue_complete(struct ciss_softc *sc, cr_qhead_t *head)
367 struct ciss_request *ac;
369 if ((ac = STAILQ_FIRST(head)) != NULL)
370 STAILQ_REMOVE_HEAD(head, cr_link);
374 /********************************************************************************
375 * space-fill a character string
378 padstr(char *targ, const char *src, int len)
389 #define ciss_report_request(a, b, c) \
390 _ciss_report_request(a, b, c, __FUNCTION__)