2 * Copyright (c) 1997, 1998, 1999
3 * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. All advertising materials mentioning features or use of this software
14 * must display the following acknowledgement:
15 * This product includes software developed by Bill Paul.
16 * 4. Neither the name of the author nor the names of any co-contributors
17 * may be used to endorse or promote products derived from this software
18 * without specific prior written permission.
20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
30 * THE POSSIBILITY OF SUCH DAMAGE.
33 #include <sys/cdefs.h>
34 __FBSDID("$FreeBSD$");
37 * Pseudo-driver for internal NWAY support on DEC 21143 and workalike
38 * controllers. Technically we're abusing the miibus code to handle
39 * media selection and NWAY support here since there is no MII
40 * interface. However the logical operations are roughly the same,
41 * and the alternative is to create a fake MII interface in the driver,
42 * which is harder to do.
45 #include <sys/param.h>
46 #include <sys/systm.h>
47 #include <sys/kernel.h>
48 #include <sys/socket.h>
49 #include <sys/errno.h>
51 #include <sys/module.h>
52 #include <sys/mutex.h>
56 #include <net/if_var.h>
57 #include <net/if_arp.h>
58 #include <net/if_media.h>
60 #include <dev/mii/mii.h>
61 #include <dev/mii/miivar.h>
64 #include <machine/bus.h>
65 #include <machine/resource.h>
67 #include <dev/pci/pcivar.h>
69 #include <dev/dc/if_dcreg.h>
71 #include "miibus_if.h"
73 #define DC_SETBIT(sc, reg, x) \
74 CSR_WRITE_4(sc, reg, \
75 CSR_READ_4(sc, reg) | x)
77 #define DC_CLRBIT(sc, reg, x) \
78 CSR_WRITE_4(sc, reg, \
79 CSR_READ_4(sc, reg) & ~x)
81 #define MIIF_AUTOTIMEOUT 0x0004
84 * This is the subsystem ID for the built-in 21143 ethernet
85 * in several Compaq Presario systems. Apparently these are
86 * 10Mbps only, so we need to treat them specially.
88 #define COMPAQ_PRESARIO_ID 0xb0bb0e11
90 static int dcphy_probe(device_t);
91 static int dcphy_attach(device_t);
93 static device_method_t dcphy_methods[] = {
94 /* device interface */
95 DEVMETHOD(device_probe, dcphy_probe),
96 DEVMETHOD(device_attach, dcphy_attach),
97 DEVMETHOD(device_detach, mii_phy_detach),
98 DEVMETHOD(device_shutdown, bus_generic_shutdown),
102 static devclass_t dcphy_devclass;
104 static driver_t dcphy_driver = {
107 sizeof(struct mii_softc)
110 DRIVER_MODULE(dcphy, miibus, dcphy_driver, dcphy_devclass, 0, 0);
112 static int dcphy_service(struct mii_softc *, struct mii_data *, int);
113 static void dcphy_status(struct mii_softc *);
114 static void dcphy_reset(struct mii_softc *);
115 static int dcphy_auto(struct mii_softc *);
117 static const struct mii_phy_funcs dcphy_funcs = {
124 dcphy_probe(device_t dev)
126 struct mii_attach_args *ma;
128 ma = device_get_ivars(dev);
131 * The dc driver will report the 21143 vendor and device
132 * ID to let us know that it wants us to attach.
134 if (ma->mii_id1 != DC_VENDORID_DEC ||
135 ma->mii_id2 != DC_DEVICEID_21143)
138 device_set_desc(dev, "Intel 21143 NWAY media interface");
140 return (BUS_PROBE_DEFAULT);
144 dcphy_attach(device_t dev)
146 struct mii_softc *sc;
147 struct dc_softc *dc_sc;
150 sc = device_get_softc(dev);
152 mii_phy_dev_attach(dev, MIIF_NOISOLATE | MIIF_NOMANPAUSE,
156 dc_sc = sc->mii_pdata->mii_ifp->if_softc;
157 CSR_WRITE_4(dc_sc, DC_10BTSTAT, 0);
158 CSR_WRITE_4(dc_sc, DC_10BTCTRL, 0);
160 brdev = device_get_parent(sc->mii_dev);
161 switch (pci_get_subdevice(brdev) << 16 | pci_get_subvendor(brdev)) {
162 case COMPAQ_PRESARIO_ID:
163 /* Example of how to only allow 10Mbps modes. */
164 sc->mii_capabilities = BMSR_ANEG | BMSR_10TFDX | BMSR_10THDX;
167 if (dc_sc->dc_pmode == DC_PMODE_SIA)
168 sc->mii_capabilities =
169 BMSR_ANEG | BMSR_10TFDX | BMSR_10THDX;
171 sc->mii_capabilities =
172 BMSR_ANEG | BMSR_100TXFDX | BMSR_100TXHDX |
173 BMSR_10TFDX | BMSR_10THDX;
177 sc->mii_capabilities &= sc->mii_capmask;
178 device_printf(dev, " ");
179 mii_phy_add_media(sc);
182 MIIBUS_MEDIAINIT(sc->mii_dev);
187 dcphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
189 struct dc_softc *dc_sc;
190 struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
194 dc_sc = mii->mii_ifp->if_softc;
202 * If the interface is not up, don't do anything.
204 if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
207 mii->mii_media_active = IFM_NONE;
208 mode = CSR_READ_4(dc_sc, DC_NETCFG);
209 mode &= ~(DC_NETCFG_FULLDUPLEX | DC_NETCFG_PORTSEL |
210 DC_NETCFG_PCS | DC_NETCFG_SCRAMBLER | DC_NETCFG_SPEEDSEL);
212 switch (IFM_SUBTYPE(ife->ifm_media)) {
215 (void)dcphy_auto(sc);
219 DC_CLRBIT(dc_sc, DC_10BTCTRL, DC_TCTL_AUTONEGENBL);
220 mode |= DC_NETCFG_PORTSEL | DC_NETCFG_PCS |
222 if ((ife->ifm_media & IFM_FDX) != 0)
223 mode |= DC_NETCFG_FULLDUPLEX;
225 mode &= ~DC_NETCFG_FULLDUPLEX;
226 CSR_WRITE_4(dc_sc, DC_NETCFG, mode);
229 DC_CLRBIT(dc_sc, DC_SIARESET, DC_SIA_RESET);
230 DC_CLRBIT(dc_sc, DC_10BTCTRL, 0xFFFF);
231 if ((ife->ifm_media & IFM_FDX) != 0)
232 DC_SETBIT(dc_sc, DC_10BTCTRL, 0x7F3D);
234 DC_SETBIT(dc_sc, DC_10BTCTRL, 0x7F3F);
235 DC_SETBIT(dc_sc, DC_SIARESET, DC_SIA_RESET);
236 DC_CLRBIT(dc_sc, DC_10BTCTRL, DC_TCTL_AUTONEGENBL);
237 mode &= ~DC_NETCFG_PORTSEL;
238 mode |= DC_NETCFG_SPEEDSEL;
239 if ((ife->ifm_media & IFM_FDX) != 0)
240 mode |= DC_NETCFG_FULLDUPLEX;
242 mode &= ~DC_NETCFG_FULLDUPLEX;
243 CSR_WRITE_4(dc_sc, DC_NETCFG, mode);
252 * Is the interface even up?
254 if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
258 * Only used for autonegotiation.
260 if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO)
263 reg = CSR_READ_4(dc_sc, DC_10BTSTAT);
264 if (!(reg & DC_TSTAT_LS10) || !(reg & DC_TSTAT_LS100))
268 * Only retry autonegotiation every 5 seconds.
270 * Otherwise, fall through to calling dcphy_status()
271 * since real Intel 21143 chips don't show valid link
272 * status until autonegotiation is switched off, and
273 * that only happens in dcphy_status(). Without this,
274 * successful autonegotiation is never recognised on
277 if (++sc->mii_ticks <= 50)
286 /* Update the media status. */
289 /* Callback if something changed. */
290 mii_phy_update(sc, cmd);
295 dcphy_status(struct mii_softc *sc)
297 struct mii_data *mii = sc->mii_pdata;
299 struct dc_softc *dc_sc;
301 dc_sc = mii->mii_ifp->if_softc;
303 mii->mii_media_status = IFM_AVALID;
304 mii->mii_media_active = IFM_ETHER;
306 if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
309 tstat = CSR_READ_4(dc_sc, DC_10BTSTAT);
310 if (!(tstat & DC_TSTAT_LS10) || !(tstat & DC_TSTAT_LS100))
311 mii->mii_media_status |= IFM_ACTIVE;
313 if (CSR_READ_4(dc_sc, DC_10BTCTRL) & DC_TCTL_AUTONEGENBL) {
314 /* Erg, still trying, I guess... */
315 if ((tstat & DC_TSTAT_ANEGSTAT) != DC_ASTAT_AUTONEGCMP) {
316 if ((DC_IS_MACRONIX(dc_sc) || DC_IS_PNICII(dc_sc)) &&
317 (tstat & DC_TSTAT_ANEGSTAT) == DC_ASTAT_DISABLE)
319 mii->mii_media_active |= IFM_NONE;
323 if (tstat & DC_TSTAT_LP_CAN_NWAY) {
324 anlpar = tstat >> 16;
325 if (anlpar & ANLPAR_TX_FD &&
326 sc->mii_capabilities & BMSR_100TXFDX)
327 mii->mii_media_active |= IFM_100_TX | IFM_FDX;
328 else if (anlpar & ANLPAR_T4 &&
329 sc->mii_capabilities & BMSR_100T4)
330 mii->mii_media_active |= IFM_100_T4 | IFM_HDX;
331 else if (anlpar & ANLPAR_TX &&
332 sc->mii_capabilities & BMSR_100TXHDX)
333 mii->mii_media_active |= IFM_100_TX | IFM_HDX;
334 else if (anlpar & ANLPAR_10_FD)
335 mii->mii_media_active |= IFM_10_T | IFM_FDX;
336 else if (anlpar & ANLPAR_10)
337 mii->mii_media_active |= IFM_10_T | IFM_HDX;
339 mii->mii_media_active |= IFM_NONE;
340 if (DC_IS_INTEL(dc_sc))
341 DC_CLRBIT(dc_sc, DC_10BTCTRL,
342 DC_TCTL_AUTONEGENBL);
347 * If the other side doesn't support NWAY, then the
348 * best we can do is determine if we have a 10Mbps or
349 * 100Mbps link. There's no way to know if the link
350 * is full or half duplex, so we default to half duplex
351 * and hope that the user is clever enough to manually
352 * change the media settings if we're wrong.
354 if (!(tstat & DC_TSTAT_LS100))
355 mii->mii_media_active |= IFM_100_TX | IFM_HDX;
356 else if (!(tstat & DC_TSTAT_LS10))
357 mii->mii_media_active |= IFM_10_T | IFM_HDX;
359 mii->mii_media_active |= IFM_NONE;
360 if (DC_IS_INTEL(dc_sc))
361 DC_CLRBIT(dc_sc, DC_10BTCTRL, DC_TCTL_AUTONEGENBL);
366 if (CSR_READ_4(dc_sc, DC_NETCFG) & DC_NETCFG_SPEEDSEL)
367 mii->mii_media_active |= IFM_10_T;
369 mii->mii_media_active |= IFM_100_TX;
370 if (CSR_READ_4(dc_sc, DC_NETCFG) & DC_NETCFG_FULLDUPLEX)
371 mii->mii_media_active |= IFM_FDX;
373 mii->mii_media_active |= IFM_HDX;
377 dcphy_auto(struct mii_softc *mii)
381 sc = mii->mii_pdata->mii_ifp->if_softc;
383 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL);
384 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_FULLDUPLEX);
385 DC_CLRBIT(sc, DC_SIARESET, DC_SIA_RESET);
386 if (mii->mii_capabilities & BMSR_100TXHDX)
387 CSR_WRITE_4(sc, DC_10BTCTRL, 0x3FFFF);
389 CSR_WRITE_4(sc, DC_10BTCTRL, 0xFFFF);
390 DC_SETBIT(sc, DC_SIARESET, DC_SIA_RESET);
391 DC_SETBIT(sc, DC_10BTCTRL, DC_TCTL_AUTONEGENBL);
392 DC_SETBIT(sc, DC_10BTSTAT, DC_ASTAT_TXDISABLE);
394 return (EJUSTRETURN);
398 dcphy_reset(struct mii_softc *mii)
402 sc = mii->mii_pdata->mii_ifp->if_softc;
404 DC_CLRBIT(sc, DC_SIARESET, DC_SIA_RESET);
406 DC_SETBIT(sc, DC_SIARESET, DC_SIA_RESET);