2 * Copyright (c) 1997, 1998, 1999
3 * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. All advertising materials mentioning features or use of this software
14 * must display the following acknowledgement:
15 * This product includes software developed by Bill Paul.
16 * 4. Neither the name of the author nor the names of any co-contributors
17 * may be used to endorse or promote products derived from this software
18 * without specific prior written permission.
20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
30 * THE POSSIBILITY OF SUCH DAMAGE.
33 #include <sys/cdefs.h>
34 __FBSDID("$FreeBSD$");
37 * DEC "tulip" clone ethernet driver. Supports the DEC/Intel 21143
38 * series chips and several workalikes including the following:
40 * Macronix 98713/98715/98725/98727/98732 PMAC (www.macronix.com)
41 * Macronix/Lite-On 82c115 PNIC II (www.macronix.com)
42 * Lite-On 82c168/82c169 PNIC (www.litecom.com)
43 * ASIX Electronics AX88140A (www.asix.com.tw)
44 * ASIX Electronics AX88141 (www.asix.com.tw)
45 * ADMtek AL981 (www.admtek.com.tw)
46 * ADMtek AN985 (www.admtek.com.tw)
47 * Netgear FA511 (www.netgear.com) Appears to be rebadged ADMTek AN985
48 * Davicom DM9100, DM9102, DM9102A (www.davicom8.com)
49 * Accton EN1217 (www.accton.com)
50 * Xircom X3201 (www.xircom.com)
52 * Conexant LANfinity (www.conexant.com)
53 * 3Com OfficeConnect 10/100B 3CSOHO100B (www.3com.com)
55 * Datasheets for the 21143 are available at developer.intel.com.
56 * Datasheets for the clone parts can be found at their respective sites.
57 * (Except for the PNIC; see www.freebsd.org/~wpaul/PNIC/pnic.ps.gz.)
58 * The PNIC II is essentially a Macronix 98715A chip; the only difference
59 * worth noting is that its multicast hash table is only 128 bits wide
62 * Written by Bill Paul <wpaul@ee.columbia.edu>
63 * Electrical Engineering Department
64 * Columbia University, New York City
67 * The Intel 21143 is the successor to the DEC 21140. It is basically
68 * the same as the 21140 but with a few new features. The 21143 supports
69 * three kinds of media attachments:
71 * o MII port, for 10Mbps and 100Mbps support and NWAY
72 * autonegotiation provided by an external PHY.
73 * o SYM port, for symbol mode 100Mbps support.
77 * The 100Mbps SYM port and 10baseT port can be used together in
78 * combination with the internal NWAY support to create a 10/100
79 * autosensing configuration.
81 * Note that not all tulip workalikes are handled in this driver: we only
82 * deal with those which are relatively well behaved. The Winbond is
83 * handled separately due to its different register offsets and the
84 * special handling needed for its various bugs. The PNIC is handled
85 * here, but I'm not thrilled about it.
87 * All of the workalike chips use some form of MII transceiver support
88 * with the exception of the Macronix chips, which also have a SYM port.
89 * The ASIX AX88140A is also documented to have a SYM port, but all
90 * the cards I've seen use an MII transceiver, probably because the
91 * AX88140A doesn't support internal NWAY.
94 #include <sys/param.h>
95 #include <sys/endian.h>
96 #include <sys/systm.h>
97 #include <sys/sockio.h>
99 #include <sys/malloc.h>
100 #include <sys/kernel.h>
101 #include <sys/module.h>
102 #include <sys/socket.h>
103 #include <sys/sysctl.h>
106 #include <net/if_arp.h>
107 #include <net/ethernet.h>
108 #include <net/if_dl.h>
109 #include <net/if_media.h>
110 #include <net/if_types.h>
111 #include <net/if_vlan_var.h>
115 #include <machine/bus_pio.h>
116 #include <machine/bus_memio.h>
117 #include <machine/bus.h>
118 #include <machine/resource.h>
120 #include <sys/rman.h>
122 #include <dev/mii/mii.h>
123 #include <dev/mii/miivar.h>
125 #include <dev/pci/pcireg.h>
126 #include <dev/pci/pcivar.h>
128 #define DC_USEIOSPACE
133 #include <pci/if_dcreg.h>
136 #include <dev/ofw/openfirm.h>
137 #include <machine/ofw_machdep.h>
140 MODULE_DEPEND(dc, pci, 1, 1, 1);
141 MODULE_DEPEND(dc, ether, 1, 1, 1);
142 MODULE_DEPEND(dc, miibus, 1, 1, 1);
144 /* "controller miibus0" required. See GENERIC if you get errors here. */
145 #include "miibus_if.h"
148 * Various supported device vendors/types and their names.
150 static struct dc_type dc_devs[] = {
151 { DC_VENDORID_DEC, DC_DEVICEID_21143,
152 "Intel 21143 10/100BaseTX" },
153 { DC_VENDORID_DAVICOM, DC_DEVICEID_DM9009,
154 "Davicom DM9009 10/100BaseTX" },
155 { DC_VENDORID_DAVICOM, DC_DEVICEID_DM9100,
156 "Davicom DM9100 10/100BaseTX" },
157 { DC_VENDORID_DAVICOM, DC_DEVICEID_DM9102,
158 "Davicom DM9102 10/100BaseTX" },
159 { DC_VENDORID_DAVICOM, DC_DEVICEID_DM9102,
160 "Davicom DM9102A 10/100BaseTX" },
161 { DC_VENDORID_ADMTEK, DC_DEVICEID_AL981,
162 "ADMtek AL981 10/100BaseTX" },
163 { DC_VENDORID_ADMTEK, DC_DEVICEID_AN985,
164 "ADMtek AN985 10/100BaseTX" },
165 { DC_VENDORID_ADMTEK, DC_DEVICEID_ADM9511,
166 "ADMtek ADM9511 10/100BaseTX" },
167 { DC_VENDORID_ADMTEK, DC_DEVICEID_ADM9513,
168 "ADMtek ADM9513 10/100BaseTX" },
169 { DC_VENDORID_ADMTEK, DC_DEVICEID_FA511,
170 "Netgear FA511 10/100BaseTX" },
171 { DC_VENDORID_ASIX, DC_DEVICEID_AX88140A,
172 "ASIX AX88140A 10/100BaseTX" },
173 { DC_VENDORID_ASIX, DC_DEVICEID_AX88140A,
174 "ASIX AX88141 10/100BaseTX" },
175 { DC_VENDORID_MX, DC_DEVICEID_98713,
176 "Macronix 98713 10/100BaseTX" },
177 { DC_VENDORID_MX, DC_DEVICEID_98713,
178 "Macronix 98713A 10/100BaseTX" },
179 { DC_VENDORID_CP, DC_DEVICEID_98713_CP,
180 "Compex RL100-TX 10/100BaseTX" },
181 { DC_VENDORID_CP, DC_DEVICEID_98713_CP,
182 "Compex RL100-TX 10/100BaseTX" },
183 { DC_VENDORID_MX, DC_DEVICEID_987x5,
184 "Macronix 98715/98715A 10/100BaseTX" },
185 { DC_VENDORID_MX, DC_DEVICEID_987x5,
186 "Macronix 98715AEC-C 10/100BaseTX" },
187 { DC_VENDORID_MX, DC_DEVICEID_987x5,
188 "Macronix 98725 10/100BaseTX" },
189 { DC_VENDORID_MX, DC_DEVICEID_98727,
190 "Macronix 98727/98732 10/100BaseTX" },
191 { DC_VENDORID_LO, DC_DEVICEID_82C115,
192 "LC82C115 PNIC II 10/100BaseTX" },
193 { DC_VENDORID_LO, DC_DEVICEID_82C168,
194 "82c168 PNIC 10/100BaseTX" },
195 { DC_VENDORID_LO, DC_DEVICEID_82C168,
196 "82c169 PNIC 10/100BaseTX" },
197 { DC_VENDORID_ACCTON, DC_DEVICEID_EN1217,
198 "Accton EN1217 10/100BaseTX" },
199 { DC_VENDORID_ACCTON, DC_DEVICEID_EN2242,
200 "Accton EN2242 MiniPCI 10/100BaseTX" },
201 { DC_VENDORID_XIRCOM, DC_DEVICEID_X3201,
202 "Xircom X3201 10/100BaseTX" },
203 { DC_VENDORID_ABOCOM, DC_DEVICEID_FE2500,
204 "Abocom FE2500 10/100BaseTX" },
205 { DC_VENDORID_ABOCOM, DC_DEVICEID_FE2500MX,
206 "Abocom FE2500MX 10/100BaseTX" },
207 { DC_VENDORID_CONEXANT, DC_DEVICEID_RS7112,
208 "Conexant LANfinity MiniPCI 10/100BaseTX" },
209 { DC_VENDORID_HAWKING, DC_DEVICEID_HAWKING_PN672TX,
210 "Hawking CB102 CardBus 10/100" },
211 { DC_VENDORID_PLANEX, DC_DEVICEID_FNW3602T,
212 "PlaneX FNW-3602-T CardBus 10/100" },
213 { DC_VENDORID_3COM, DC_DEVICEID_3CSOHOB,
214 "3Com OfficeConnect 10/100B" },
215 { DC_VENDORID_MICROSOFT, DC_DEVICEID_MSMN120,
216 "Microsoft MN-120 CardBus 10/100" },
217 { DC_VENDORID_MICROSOFT, DC_DEVICEID_MSMN130,
218 "Microsoft MN-130 10/100" },
219 { DC_VENDORID_MICROSOFT, DC_DEVICEID_MSMN130_FAKE,
220 "Microsoft MN-130 10/100" },
224 static int dc_probe (device_t);
225 static int dc_attach (device_t);
226 static int dc_detach (device_t);
227 static int dc_suspend (device_t);
228 static int dc_resume (device_t);
229 static struct dc_type *dc_devtype (device_t);
230 static int dc_newbuf (struct dc_softc *, int, int);
231 static int dc_encap (struct dc_softc *, struct mbuf **);
232 static void dc_pnic_rx_bug_war (struct dc_softc *, int);
233 static int dc_rx_resync (struct dc_softc *);
234 static void dc_rxeof (struct dc_softc *);
235 static void dc_txeof (struct dc_softc *);
236 static void dc_tick (void *);
237 static void dc_tx_underrun (struct dc_softc *);
238 static void dc_intr (void *);
239 static void dc_start (struct ifnet *);
240 static int dc_ioctl (struct ifnet *, u_long, caddr_t);
241 static void dc_init (void *);
242 static void dc_stop (struct dc_softc *);
243 static void dc_watchdog (struct ifnet *);
244 static void dc_shutdown (device_t);
245 static int dc_ifmedia_upd (struct ifnet *);
246 static void dc_ifmedia_sts (struct ifnet *, struct ifmediareq *);
248 static void dc_delay (struct dc_softc *);
249 static void dc_eeprom_idle (struct dc_softc *);
250 static void dc_eeprom_putbyte (struct dc_softc *, int);
251 static void dc_eeprom_getword (struct dc_softc *, int, u_int16_t *);
252 static void dc_eeprom_getword_pnic
253 (struct dc_softc *, int, u_int16_t *);
254 static void dc_eeprom_getword_xircom
255 (struct dc_softc *, int, u_int16_t *);
256 static void dc_eeprom_width (struct dc_softc *);
257 static void dc_read_eeprom (struct dc_softc *, caddr_t, int, int, int);
259 static void dc_mii_writebit (struct dc_softc *, int);
260 static int dc_mii_readbit (struct dc_softc *);
261 static void dc_mii_sync (struct dc_softc *);
262 static void dc_mii_send (struct dc_softc *, u_int32_t, int);
263 static int dc_mii_readreg (struct dc_softc *, struct dc_mii_frame *);
264 static int dc_mii_writereg (struct dc_softc *, struct dc_mii_frame *);
265 static int dc_miibus_readreg (device_t, int, int);
266 static int dc_miibus_writereg (device_t, int, int, int);
267 static void dc_miibus_statchg (device_t);
268 static void dc_miibus_mediainit (device_t);
270 static void dc_setcfg (struct dc_softc *, int);
271 static uint32_t dc_mchash_le (struct dc_softc *, const uint8_t *);
272 static uint32_t dc_mchash_be (const uint8_t *);
273 static void dc_setfilt_21143 (struct dc_softc *);
274 static void dc_setfilt_asix (struct dc_softc *);
275 static void dc_setfilt_admtek (struct dc_softc *);
276 static void dc_setfilt_xircom (struct dc_softc *);
278 static void dc_setfilt (struct dc_softc *);
280 static void dc_reset (struct dc_softc *);
281 static int dc_list_rx_init (struct dc_softc *);
282 static int dc_list_tx_init (struct dc_softc *);
284 static void dc_read_srom (struct dc_softc *, int);
285 static void dc_parse_21143_srom (struct dc_softc *);
286 static void dc_decode_leaf_sia (struct dc_softc *, struct dc_eblock_sia *);
287 static void dc_decode_leaf_mii (struct dc_softc *, struct dc_eblock_mii *);
288 static void dc_decode_leaf_sym (struct dc_softc *, struct dc_eblock_sym *);
289 static void dc_apply_fixup (struct dc_softc *, int);
291 static void dc_dma_map_txbuf (void *, bus_dma_segment_t *, int, bus_size_t,
293 static void dc_dma_map_rxbuf (void *, bus_dma_segment_t *, int, bus_size_t,
297 #define DC_RES SYS_RES_IOPORT
298 #define DC_RID DC_PCI_CFBIO
300 #define DC_RES SYS_RES_MEMORY
301 #define DC_RID DC_PCI_CFBMA
304 static device_method_t dc_methods[] = {
305 /* Device interface */
306 DEVMETHOD(device_probe, dc_probe),
307 DEVMETHOD(device_attach, dc_attach),
308 DEVMETHOD(device_detach, dc_detach),
309 DEVMETHOD(device_suspend, dc_suspend),
310 DEVMETHOD(device_resume, dc_resume),
311 DEVMETHOD(device_shutdown, dc_shutdown),
314 DEVMETHOD(bus_print_child, bus_generic_print_child),
315 DEVMETHOD(bus_driver_added, bus_generic_driver_added),
318 DEVMETHOD(miibus_readreg, dc_miibus_readreg),
319 DEVMETHOD(miibus_writereg, dc_miibus_writereg),
320 DEVMETHOD(miibus_statchg, dc_miibus_statchg),
321 DEVMETHOD(miibus_mediainit, dc_miibus_mediainit),
326 static driver_t dc_driver = {
329 sizeof(struct dc_softc)
332 static devclass_t dc_devclass;
334 static int dc_quick = 1;
335 SYSCTL_INT(_hw, OID_AUTO, dc_quick, CTLFLAG_RW, &dc_quick, 0,
336 "do not m_devget() in dc driver");
339 DRIVER_MODULE(dc, cardbus, dc_driver, dc_devclass, 0, 0);
340 DRIVER_MODULE(dc, pci, dc_driver, dc_devclass, 0, 0);
341 DRIVER_MODULE(miibus, dc, miibus_driver, miibus_devclass, 0, 0);
343 #define DC_SETBIT(sc, reg, x) \
344 CSR_WRITE_4(sc, reg, CSR_READ_4(sc, reg) | (x))
346 #define DC_CLRBIT(sc, reg, x) \
347 CSR_WRITE_4(sc, reg, CSR_READ_4(sc, reg) & ~(x))
349 #define SIO_SET(x) DC_SETBIT(sc, DC_SIO, (x))
350 #define SIO_CLR(x) DC_CLRBIT(sc, DC_SIO, (x))
355 dc_delay(struct dc_softc *sc)
359 for (idx = (300 / 33) + 1; idx > 0; idx--)
360 CSR_READ_4(sc, DC_BUSCTL);
364 dc_eeprom_width(struct dc_softc *sc)
368 /* Force EEPROM to idle state. */
371 /* Enter EEPROM access mode. */
372 CSR_WRITE_4(sc, DC_SIO, DC_SIO_EESEL);
374 DC_SETBIT(sc, DC_SIO, DC_SIO_ROMCTL_READ);
376 DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK);
378 DC_SETBIT(sc, DC_SIO, DC_SIO_EE_CS);
383 DC_SETBIT(sc, DC_SIO, DC_SIO_EE_DATAIN);
385 DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_DATAIN);
387 DC_SETBIT(sc, DC_SIO, DC_SIO_EE_CLK);
389 DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK);
393 for (i = 1; i <= 12; i++) {
394 DC_SETBIT(sc, DC_SIO, DC_SIO_EE_CLK);
396 if (!(CSR_READ_4(sc, DC_SIO) & DC_SIO_EE_DATAOUT)) {
397 DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK);
401 DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK);
405 /* Turn off EEPROM access mode. */
413 /* Enter EEPROM access mode. */
414 CSR_WRITE_4(sc, DC_SIO, DC_SIO_EESEL);
416 DC_SETBIT(sc, DC_SIO, DC_SIO_ROMCTL_READ);
418 DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK);
420 DC_SETBIT(sc, DC_SIO, DC_SIO_EE_CS);
423 /* Turn off EEPROM access mode. */
428 dc_eeprom_idle(struct dc_softc *sc)
432 CSR_WRITE_4(sc, DC_SIO, DC_SIO_EESEL);
434 DC_SETBIT(sc, DC_SIO, DC_SIO_ROMCTL_READ);
436 DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK);
438 DC_SETBIT(sc, DC_SIO, DC_SIO_EE_CS);
441 for (i = 0; i < 25; i++) {
442 DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK);
444 DC_SETBIT(sc, DC_SIO, DC_SIO_EE_CLK);
448 DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK);
450 DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CS);
452 CSR_WRITE_4(sc, DC_SIO, 0x00000000);
456 * Send a read command and address to the EEPROM, check for ACK.
459 dc_eeprom_putbyte(struct dc_softc *sc, int addr)
463 d = DC_EECMD_READ >> 6;
466 DC_SETBIT(sc, DC_SIO, DC_SIO_EE_DATAIN);
468 DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_DATAIN);
470 DC_SETBIT(sc, DC_SIO, DC_SIO_EE_CLK);
472 DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK);
477 * Feed in each bit and strobe the clock.
479 for (i = sc->dc_romwidth; i--;) {
480 if (addr & (1 << i)) {
481 SIO_SET(DC_SIO_EE_DATAIN);
483 SIO_CLR(DC_SIO_EE_DATAIN);
486 SIO_SET(DC_SIO_EE_CLK);
488 SIO_CLR(DC_SIO_EE_CLK);
494 * Read a word of data stored in the EEPROM at address 'addr.'
495 * The PNIC 82c168/82c169 has its own non-standard way to read
499 dc_eeprom_getword_pnic(struct dc_softc *sc, int addr, u_int16_t *dest)
504 CSR_WRITE_4(sc, DC_PN_SIOCTL, DC_PN_EEOPCODE_READ | addr);
506 for (i = 0; i < DC_TIMEOUT; i++) {
508 r = CSR_READ_4(sc, DC_SIO);
509 if (!(r & DC_PN_SIOCTL_BUSY)) {
510 *dest = (u_int16_t)(r & 0xFFFF);
517 * Read a word of data stored in the EEPROM at address 'addr.'
518 * The Xircom X3201 has its own non-standard way to read
522 dc_eeprom_getword_xircom(struct dc_softc *sc, int addr, u_int16_t *dest)
525 SIO_SET(DC_SIO_ROMSEL | DC_SIO_ROMCTL_READ);
528 CSR_WRITE_4(sc, DC_ROM, addr | 0x160);
529 *dest = (u_int16_t)CSR_READ_4(sc, DC_SIO) & 0xff;
531 CSR_WRITE_4(sc, DC_ROM, addr | 0x160);
532 *dest |= ((u_int16_t)CSR_READ_4(sc, DC_SIO) & 0xff) << 8;
534 SIO_CLR(DC_SIO_ROMSEL | DC_SIO_ROMCTL_READ);
538 * Read a word of data stored in the EEPROM at address 'addr.'
541 dc_eeprom_getword(struct dc_softc *sc, int addr, u_int16_t *dest)
546 /* Force EEPROM to idle state. */
549 /* Enter EEPROM access mode. */
550 CSR_WRITE_4(sc, DC_SIO, DC_SIO_EESEL);
552 DC_SETBIT(sc, DC_SIO, DC_SIO_ROMCTL_READ);
554 DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK);
556 DC_SETBIT(sc, DC_SIO, DC_SIO_EE_CS);
560 * Send address of word we want to read.
562 dc_eeprom_putbyte(sc, addr);
565 * Start reading bits from EEPROM.
567 for (i = 0x8000; i; i >>= 1) {
568 SIO_SET(DC_SIO_EE_CLK);
570 if (CSR_READ_4(sc, DC_SIO) & DC_SIO_EE_DATAOUT)
573 SIO_CLR(DC_SIO_EE_CLK);
577 /* Turn off EEPROM access mode. */
584 * Read a sequence of words from the EEPROM.
587 dc_read_eeprom(struct dc_softc *sc, caddr_t dest, int off, int cnt, int be)
590 u_int16_t word = 0, *ptr;
592 for (i = 0; i < cnt; i++) {
594 dc_eeprom_getword_pnic(sc, off + i, &word);
595 else if (DC_IS_XIRCOM(sc))
596 dc_eeprom_getword_xircom(sc, off + i, &word);
598 dc_eeprom_getword(sc, off + i, &word);
599 ptr = (u_int16_t *)(dest + (i * 2));
601 *ptr = be16toh(word);
603 *ptr = le16toh(word);
608 * The following two routines are taken from the Macronix 98713
609 * Application Notes pp.19-21.
612 * Write a bit to the MII bus.
615 dc_mii_writebit(struct dc_softc *sc, int bit)
619 CSR_WRITE_4(sc, DC_SIO,
620 DC_SIO_ROMCTL_WRITE | DC_SIO_MII_DATAOUT);
622 CSR_WRITE_4(sc, DC_SIO, DC_SIO_ROMCTL_WRITE);
624 DC_SETBIT(sc, DC_SIO, DC_SIO_MII_CLK);
625 DC_CLRBIT(sc, DC_SIO, DC_SIO_MII_CLK);
629 * Read a bit from the MII bus.
632 dc_mii_readbit(struct dc_softc *sc)
635 CSR_WRITE_4(sc, DC_SIO, DC_SIO_ROMCTL_READ | DC_SIO_MII_DIR);
636 CSR_READ_4(sc, DC_SIO);
637 DC_SETBIT(sc, DC_SIO, DC_SIO_MII_CLK);
638 DC_CLRBIT(sc, DC_SIO, DC_SIO_MII_CLK);
639 if (CSR_READ_4(sc, DC_SIO) & DC_SIO_MII_DATAIN)
646 * Sync the PHYs by setting data bit and strobing the clock 32 times.
649 dc_mii_sync(struct dc_softc *sc)
653 CSR_WRITE_4(sc, DC_SIO, DC_SIO_ROMCTL_WRITE);
655 for (i = 0; i < 32; i++)
656 dc_mii_writebit(sc, 1);
660 * Clock a series of bits through the MII.
663 dc_mii_send(struct dc_softc *sc, u_int32_t bits, int cnt)
667 for (i = (0x1 << (cnt - 1)); i; i >>= 1)
668 dc_mii_writebit(sc, bits & i);
672 * Read an PHY register through the MII.
675 dc_mii_readreg(struct dc_softc *sc, struct dc_mii_frame *frame)
682 * Set up frame for RX.
684 frame->mii_stdelim = DC_MII_STARTDELIM;
685 frame->mii_opcode = DC_MII_READOP;
686 frame->mii_turnaround = 0;
695 * Send command/address info.
697 dc_mii_send(sc, frame->mii_stdelim, 2);
698 dc_mii_send(sc, frame->mii_opcode, 2);
699 dc_mii_send(sc, frame->mii_phyaddr, 5);
700 dc_mii_send(sc, frame->mii_regaddr, 5);
704 dc_mii_writebit(sc, 1);
705 dc_mii_writebit(sc, 0);
709 ack = dc_mii_readbit(sc);
712 * Now try reading data bits. If the ack failed, we still
713 * need to clock through 16 cycles to keep the PHY(s) in sync.
716 for (i = 0; i < 16; i++)
721 for (i = 0x8000; i; i >>= 1) {
723 if (dc_mii_readbit(sc))
724 frame->mii_data |= i;
730 dc_mii_writebit(sc, 0);
731 dc_mii_writebit(sc, 0);
741 * Write to a PHY register through the MII.
744 dc_mii_writereg(struct dc_softc *sc, struct dc_mii_frame *frame)
749 * Set up frame for TX.
752 frame->mii_stdelim = DC_MII_STARTDELIM;
753 frame->mii_opcode = DC_MII_WRITEOP;
754 frame->mii_turnaround = DC_MII_TURNAROUND;
761 dc_mii_send(sc, frame->mii_stdelim, 2);
762 dc_mii_send(sc, frame->mii_opcode, 2);
763 dc_mii_send(sc, frame->mii_phyaddr, 5);
764 dc_mii_send(sc, frame->mii_regaddr, 5);
765 dc_mii_send(sc, frame->mii_turnaround, 2);
766 dc_mii_send(sc, frame->mii_data, 16);
769 dc_mii_writebit(sc, 0);
770 dc_mii_writebit(sc, 0);
778 dc_miibus_readreg(device_t dev, int phy, int reg)
780 struct dc_mii_frame frame;
782 int i, rval, phy_reg = 0;
784 sc = device_get_softc(dev);
785 bzero(&frame, sizeof(frame));
788 * Note: both the AL981 and AN985 have internal PHYs,
789 * however the AL981 provides direct access to the PHY
790 * registers while the AN985 uses a serial MII interface.
791 * The AN985's MII interface is also buggy in that you
792 * can read from any MII address (0 to 31), but only address 1
793 * behaves normally. To deal with both cases, we pretend
794 * that the PHY is at MII address 1.
796 if (DC_IS_ADMTEK(sc) && phy != DC_ADMTEK_PHYADDR)
800 * Note: the ukphy probes of the RS7112 report a PHY at
801 * MII address 0 (possibly HomePNA?) and 1 (ethernet)
802 * so we only respond to correct one.
804 if (DC_IS_CONEXANT(sc) && phy != DC_CONEXANT_PHYADDR)
807 if (sc->dc_pmode != DC_PMODE_MII) {
808 if (phy == (MII_NPHY - 1)) {
812 * Fake something to make the probe
813 * code think there's a PHY here.
815 return (BMSR_MEDIAMASK);
819 return (DC_VENDORID_LO);
820 return (DC_VENDORID_DEC);
824 return (DC_DEVICEID_82C168);
825 return (DC_DEVICEID_21143);
835 if (DC_IS_PNIC(sc)) {
836 CSR_WRITE_4(sc, DC_PN_MII, DC_PN_MIIOPCODE_READ |
837 (phy << 23) | (reg << 18));
838 for (i = 0; i < DC_TIMEOUT; i++) {
840 rval = CSR_READ_4(sc, DC_PN_MII);
841 if (!(rval & DC_PN_MII_BUSY)) {
843 return (rval == 0xFFFF ? 0 : rval);
849 if (DC_IS_COMET(sc)) {
852 phy_reg = DC_AL_BMCR;
855 phy_reg = DC_AL_BMSR;
858 phy_reg = DC_AL_VENID;
861 phy_reg = DC_AL_DEVID;
864 phy_reg = DC_AL_ANAR;
867 phy_reg = DC_AL_LPAR;
870 phy_reg = DC_AL_ANER;
873 printf("dc%d: phy_read: bad phy register %x\n",
879 rval = CSR_READ_4(sc, phy_reg) & 0x0000FFFF;
886 frame.mii_phyaddr = phy;
887 frame.mii_regaddr = reg;
888 if (sc->dc_type == DC_TYPE_98713) {
889 phy_reg = CSR_READ_4(sc, DC_NETCFG);
890 CSR_WRITE_4(sc, DC_NETCFG, phy_reg & ~DC_NETCFG_PORTSEL);
892 dc_mii_readreg(sc, &frame);
893 if (sc->dc_type == DC_TYPE_98713)
894 CSR_WRITE_4(sc, DC_NETCFG, phy_reg);
896 return (frame.mii_data);
900 dc_miibus_writereg(device_t dev, int phy, int reg, int data)
903 struct dc_mii_frame frame;
906 sc = device_get_softc(dev);
907 bzero(&frame, sizeof(frame));
909 if (DC_IS_ADMTEK(sc) && phy != DC_ADMTEK_PHYADDR)
912 if (DC_IS_CONEXANT(sc) && phy != DC_CONEXANT_PHYADDR)
915 if (DC_IS_PNIC(sc)) {
916 CSR_WRITE_4(sc, DC_PN_MII, DC_PN_MIIOPCODE_WRITE |
917 (phy << 23) | (reg << 10) | data);
918 for (i = 0; i < DC_TIMEOUT; i++) {
919 if (!(CSR_READ_4(sc, DC_PN_MII) & DC_PN_MII_BUSY))
925 if (DC_IS_COMET(sc)) {
928 phy_reg = DC_AL_BMCR;
931 phy_reg = DC_AL_BMSR;
934 phy_reg = DC_AL_VENID;
937 phy_reg = DC_AL_DEVID;
940 phy_reg = DC_AL_ANAR;
943 phy_reg = DC_AL_LPAR;
946 phy_reg = DC_AL_ANER;
949 printf("dc%d: phy_write: bad phy register %x\n",
955 CSR_WRITE_4(sc, phy_reg, data);
959 frame.mii_phyaddr = phy;
960 frame.mii_regaddr = reg;
961 frame.mii_data = data;
963 if (sc->dc_type == DC_TYPE_98713) {
964 phy_reg = CSR_READ_4(sc, DC_NETCFG);
965 CSR_WRITE_4(sc, DC_NETCFG, phy_reg & ~DC_NETCFG_PORTSEL);
967 dc_mii_writereg(sc, &frame);
968 if (sc->dc_type == DC_TYPE_98713)
969 CSR_WRITE_4(sc, DC_NETCFG, phy_reg);
975 dc_miibus_statchg(device_t dev)
978 struct mii_data *mii;
981 sc = device_get_softc(dev);
982 if (DC_IS_ADMTEK(sc))
985 mii = device_get_softc(sc->dc_miibus);
986 ifm = &mii->mii_media;
987 if (DC_IS_DAVICOM(sc) &&
988 IFM_SUBTYPE(ifm->ifm_media) == IFM_HPNA_1) {
989 dc_setcfg(sc, ifm->ifm_media);
990 sc->dc_if_media = ifm->ifm_media;
992 dc_setcfg(sc, mii->mii_media_active);
993 sc->dc_if_media = mii->mii_media_active;
998 * Special support for DM9102A cards with HomePNA PHYs. Note:
999 * with the Davicom DM9102A/DM9801 eval board that I have, it seems
1000 * to be impossible to talk to the management interface of the DM9801
1001 * PHY (its MDIO pin is not connected to anything). Consequently,
1002 * the driver has to just 'know' about the additional mode and deal
1003 * with it itself. *sigh*
1006 dc_miibus_mediainit(device_t dev)
1008 struct dc_softc *sc;
1009 struct mii_data *mii;
1010 struct ifmedia *ifm;
1013 rev = pci_read_config(dev, DC_PCI_CFRV, 4) & 0xFF;
1015 sc = device_get_softc(dev);
1016 mii = device_get_softc(sc->dc_miibus);
1017 ifm = &mii->mii_media;
1019 if (DC_IS_DAVICOM(sc) && rev >= DC_REVISION_DM9102A)
1020 ifmedia_add(ifm, IFM_ETHER | IFM_HPNA_1, 0, NULL);
1023 #define DC_BITS_512 9
1024 #define DC_BITS_128 7
1025 #define DC_BITS_64 6
1028 dc_mchash_le(struct dc_softc *sc, const uint8_t *addr)
1032 /* Compute CRC for the address value. */
1033 crc = ether_crc32_le(addr, ETHER_ADDR_LEN);
1036 * The hash table on the PNIC II and the MX98715AEC-C/D/E
1037 * chips is only 128 bits wide.
1039 if (sc->dc_flags & DC_128BIT_HASH)
1040 return (crc & ((1 << DC_BITS_128) - 1));
1042 /* The hash table on the MX98715BEC is only 64 bits wide. */
1043 if (sc->dc_flags & DC_64BIT_HASH)
1044 return (crc & ((1 << DC_BITS_64) - 1));
1046 /* Xircom's hash filtering table is different (read: weird) */
1047 /* Xircom uses the LEAST significant bits */
1048 if (DC_IS_XIRCOM(sc)) {
1049 if ((crc & 0x180) == 0x180)
1050 return ((crc & 0x0F) + (crc & 0x70) * 3 + (14 << 4));
1052 return ((crc & 0x1F) + ((crc >> 1) & 0xF0) * 3 +
1056 return (crc & ((1 << DC_BITS_512) - 1));
1060 * Calculate CRC of a multicast group address, return the lower 6 bits.
1063 dc_mchash_be(const uint8_t *addr)
1067 /* Compute CRC for the address value. */
1068 crc = ether_crc32_be(addr, ETHER_ADDR_LEN);
1070 /* Return the filter bit position. */
1071 return ((crc >> 26) & 0x0000003F);
1075 * 21143-style RX filter setup routine. Filter programming is done by
1076 * downloading a special setup frame into the TX engine. 21143, Macronix,
1077 * PNIC, PNIC II and Davicom chips are programmed this way.
1079 * We always program the chip using 'hash perfect' mode, i.e. one perfect
1080 * address (our node address) and a 512-bit hash filter for multicast
1081 * frames. We also sneak the broadcast address into the hash filter since
1085 dc_setfilt_21143(struct dc_softc *sc)
1087 struct dc_desc *sframe;
1089 struct ifmultiaddr *ifma;
1093 ifp = &sc->arpcom.ac_if;
1095 i = sc->dc_cdata.dc_tx_prod;
1096 DC_INC(sc->dc_cdata.dc_tx_prod, DC_TX_LIST_CNT);
1097 sc->dc_cdata.dc_tx_cnt++;
1098 sframe = &sc->dc_ldata->dc_tx_list[i];
1099 sp = sc->dc_cdata.dc_sbuf;
1100 bzero(sp, DC_SFRAME_LEN);
1102 sframe->dc_data = htole32(sc->dc_saddr);
1103 sframe->dc_ctl = htole32(DC_SFRAME_LEN | DC_TXCTL_SETUP |
1104 DC_TXCTL_TLINK | DC_FILTER_HASHPERF | DC_TXCTL_FINT);
1106 sc->dc_cdata.dc_tx_chain[i] = (struct mbuf *)sc->dc_cdata.dc_sbuf;
1108 /* If we want promiscuous mode, set the allframes bit. */
1109 if (ifp->if_flags & IFF_PROMISC)
1110 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_PROMISC);
1112 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_RX_PROMISC);
1114 if (ifp->if_flags & IFF_ALLMULTI)
1115 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_ALLMULTI);
1117 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_RX_ALLMULTI);
1119 TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
1120 if (ifma->ifma_addr->sa_family != AF_LINK)
1122 h = dc_mchash_le(sc,
1123 LLADDR((struct sockaddr_dl *)ifma->ifma_addr));
1124 sp[h >> 4] |= htole32(1 << (h & 0xF));
1127 if (ifp->if_flags & IFF_BROADCAST) {
1128 h = dc_mchash_le(sc, ifp->if_broadcastaddr);
1129 sp[h >> 4] |= htole32(1 << (h & 0xF));
1132 /* Set our MAC address */
1133 sp[39] = DC_SP_MAC(((u_int16_t *)sc->arpcom.ac_enaddr)[0]);
1134 sp[40] = DC_SP_MAC(((u_int16_t *)sc->arpcom.ac_enaddr)[1]);
1135 sp[41] = DC_SP_MAC(((u_int16_t *)sc->arpcom.ac_enaddr)[2]);
1137 sframe->dc_status = htole32(DC_TXSTAT_OWN);
1138 CSR_WRITE_4(sc, DC_TXSTART, 0xFFFFFFFF);
1141 * The PNIC takes an exceedingly long time to process its
1142 * setup frame; wait 10ms after posting the setup frame
1143 * before proceeding, just so it has time to swallow its
1152 dc_setfilt_admtek(struct dc_softc *sc)
1155 struct ifmultiaddr *ifma;
1157 u_int32_t hashes[2] = { 0, 0 };
1159 ifp = &sc->arpcom.ac_if;
1161 /* Init our MAC address. */
1162 CSR_WRITE_4(sc, DC_AL_PAR0, *(u_int32_t *)(&sc->arpcom.ac_enaddr[0]));
1163 CSR_WRITE_4(sc, DC_AL_PAR1, *(u_int32_t *)(&sc->arpcom.ac_enaddr[4]));
1165 /* If we want promiscuous mode, set the allframes bit. */
1166 if (ifp->if_flags & IFF_PROMISC)
1167 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_PROMISC);
1169 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_RX_PROMISC);
1171 if (ifp->if_flags & IFF_ALLMULTI)
1172 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_ALLMULTI);
1174 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_RX_ALLMULTI);
1176 /* First, zot all the existing hash bits. */
1177 CSR_WRITE_4(sc, DC_AL_MAR0, 0);
1178 CSR_WRITE_4(sc, DC_AL_MAR1, 0);
1181 * If we're already in promisc or allmulti mode, we
1182 * don't have to bother programming the multicast filter.
1184 if (ifp->if_flags & (IFF_PROMISC | IFF_ALLMULTI))
1187 /* Now program new ones. */
1188 TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
1189 if (ifma->ifma_addr->sa_family != AF_LINK)
1191 if (DC_IS_CENTAUR(sc))
1192 h = dc_mchash_le(sc,
1193 LLADDR((struct sockaddr_dl *)ifma->ifma_addr));
1196 LLADDR((struct sockaddr_dl *)ifma->ifma_addr));
1198 hashes[0] |= (1 << h);
1200 hashes[1] |= (1 << (h - 32));
1203 CSR_WRITE_4(sc, DC_AL_MAR0, hashes[0]);
1204 CSR_WRITE_4(sc, DC_AL_MAR1, hashes[1]);
1208 dc_setfilt_asix(struct dc_softc *sc)
1211 struct ifmultiaddr *ifma;
1213 u_int32_t hashes[2] = { 0, 0 };
1215 ifp = &sc->arpcom.ac_if;
1217 /* Init our MAC address */
1218 CSR_WRITE_4(sc, DC_AX_FILTIDX, DC_AX_FILTIDX_PAR0);
1219 CSR_WRITE_4(sc, DC_AX_FILTDATA,
1220 *(u_int32_t *)(&sc->arpcom.ac_enaddr[0]));
1221 CSR_WRITE_4(sc, DC_AX_FILTIDX, DC_AX_FILTIDX_PAR1);
1222 CSR_WRITE_4(sc, DC_AX_FILTDATA,
1223 *(u_int32_t *)(&sc->arpcom.ac_enaddr[4]));
1225 /* If we want promiscuous mode, set the allframes bit. */
1226 if (ifp->if_flags & IFF_PROMISC)
1227 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_PROMISC);
1229 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_RX_PROMISC);
1231 if (ifp->if_flags & IFF_ALLMULTI)
1232 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_ALLMULTI);
1234 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_RX_ALLMULTI);
1237 * The ASIX chip has a special bit to enable reception
1238 * of broadcast frames.
1240 if (ifp->if_flags & IFF_BROADCAST)
1241 DC_SETBIT(sc, DC_NETCFG, DC_AX_NETCFG_RX_BROAD);
1243 DC_CLRBIT(sc, DC_NETCFG, DC_AX_NETCFG_RX_BROAD);
1245 /* first, zot all the existing hash bits */
1246 CSR_WRITE_4(sc, DC_AX_FILTIDX, DC_AX_FILTIDX_MAR0);
1247 CSR_WRITE_4(sc, DC_AX_FILTDATA, 0);
1248 CSR_WRITE_4(sc, DC_AX_FILTIDX, DC_AX_FILTIDX_MAR1);
1249 CSR_WRITE_4(sc, DC_AX_FILTDATA, 0);
1252 * If we're already in promisc or allmulti mode, we
1253 * don't have to bother programming the multicast filter.
1255 if (ifp->if_flags & (IFF_PROMISC | IFF_ALLMULTI))
1258 /* now program new ones */
1259 TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
1260 if (ifma->ifma_addr->sa_family != AF_LINK)
1262 h = dc_mchash_be(LLADDR((struct sockaddr_dl *)ifma->ifma_addr));
1264 hashes[0] |= (1 << h);
1266 hashes[1] |= (1 << (h - 32));
1269 CSR_WRITE_4(sc, DC_AX_FILTIDX, DC_AX_FILTIDX_MAR0);
1270 CSR_WRITE_4(sc, DC_AX_FILTDATA, hashes[0]);
1271 CSR_WRITE_4(sc, DC_AX_FILTIDX, DC_AX_FILTIDX_MAR1);
1272 CSR_WRITE_4(sc, DC_AX_FILTDATA, hashes[1]);
1276 dc_setfilt_xircom(struct dc_softc *sc)
1279 struct ifmultiaddr *ifma;
1280 struct dc_desc *sframe;
1284 ifp = &sc->arpcom.ac_if;
1285 DC_CLRBIT(sc, DC_NETCFG, (DC_NETCFG_TX_ON | DC_NETCFG_RX_ON));
1287 i = sc->dc_cdata.dc_tx_prod;
1288 DC_INC(sc->dc_cdata.dc_tx_prod, DC_TX_LIST_CNT);
1289 sc->dc_cdata.dc_tx_cnt++;
1290 sframe = &sc->dc_ldata->dc_tx_list[i];
1291 sp = sc->dc_cdata.dc_sbuf;
1292 bzero(sp, DC_SFRAME_LEN);
1294 sframe->dc_data = htole32(sc->dc_saddr);
1295 sframe->dc_ctl = htole32(DC_SFRAME_LEN | DC_TXCTL_SETUP |
1296 DC_TXCTL_TLINK | DC_FILTER_HASHPERF | DC_TXCTL_FINT);
1298 sc->dc_cdata.dc_tx_chain[i] = (struct mbuf *)sc->dc_cdata.dc_sbuf;
1300 /* If we want promiscuous mode, set the allframes bit. */
1301 if (ifp->if_flags & IFF_PROMISC)
1302 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_PROMISC);
1304 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_RX_PROMISC);
1306 if (ifp->if_flags & IFF_ALLMULTI)
1307 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_ALLMULTI);
1309 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_RX_ALLMULTI);
1311 TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
1312 if (ifma->ifma_addr->sa_family != AF_LINK)
1314 h = dc_mchash_le(sc,
1315 LLADDR((struct sockaddr_dl *)ifma->ifma_addr));
1316 sp[h >> 4] |= htole32(1 << (h & 0xF));
1319 if (ifp->if_flags & IFF_BROADCAST) {
1320 h = dc_mchash_le(sc, ifp->if_broadcastaddr);
1321 sp[h >> 4] |= htole32(1 << (h & 0xF));
1324 /* Set our MAC address */
1325 sp[0] = DC_SP_MAC(((u_int16_t *)sc->arpcom.ac_enaddr)[0]);
1326 sp[1] = DC_SP_MAC(((u_int16_t *)sc->arpcom.ac_enaddr)[1]);
1327 sp[2] = DC_SP_MAC(((u_int16_t *)sc->arpcom.ac_enaddr)[2]);
1329 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_TX_ON);
1330 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_ON);
1331 ifp->if_flags |= IFF_RUNNING;
1332 sframe->dc_status = htole32(DC_TXSTAT_OWN);
1333 CSR_WRITE_4(sc, DC_TXSTART, 0xFFFFFFFF);
1344 dc_setfilt(struct dc_softc *sc)
1347 if (DC_IS_INTEL(sc) || DC_IS_MACRONIX(sc) || DC_IS_PNIC(sc) ||
1348 DC_IS_PNICII(sc) || DC_IS_DAVICOM(sc) || DC_IS_CONEXANT(sc))
1349 dc_setfilt_21143(sc);
1352 dc_setfilt_asix(sc);
1354 if (DC_IS_ADMTEK(sc))
1355 dc_setfilt_admtek(sc);
1357 if (DC_IS_XIRCOM(sc))
1358 dc_setfilt_xircom(sc);
1362 * In order to fiddle with the 'full-duplex' and '100Mbps' bits in
1363 * the netconfig register, we first have to put the transmit and/or
1364 * receive logic in the idle state.
1367 dc_setcfg(struct dc_softc *sc, int media)
1369 int i, restart = 0, watchdogreg;
1372 if (IFM_SUBTYPE(media) == IFM_NONE)
1375 if (CSR_READ_4(sc, DC_NETCFG) & (DC_NETCFG_TX_ON | DC_NETCFG_RX_ON)) {
1377 DC_CLRBIT(sc, DC_NETCFG, (DC_NETCFG_TX_ON | DC_NETCFG_RX_ON));
1379 for (i = 0; i < DC_TIMEOUT; i++) {
1380 isr = CSR_READ_4(sc, DC_ISR);
1381 if (isr & DC_ISR_TX_IDLE &&
1382 ((isr & DC_ISR_RX_STATE) == DC_RXSTATE_STOPPED ||
1383 (isr & DC_ISR_RX_STATE) == DC_RXSTATE_WAIT))
1388 if (i == DC_TIMEOUT)
1389 printf("dc%d: failed to force tx and "
1390 "rx to idle state\n", sc->dc_unit);
1393 if (IFM_SUBTYPE(media) == IFM_100_TX) {
1394 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_SPEEDSEL);
1395 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_HEARTBEAT);
1396 if (sc->dc_pmode == DC_PMODE_MII) {
1397 if (DC_IS_INTEL(sc)) {
1398 /* There's a write enable bit here that reads as 1. */
1399 watchdogreg = CSR_READ_4(sc, DC_WATCHDOG);
1400 watchdogreg &= ~DC_WDOG_CTLWREN;
1401 watchdogreg |= DC_WDOG_JABBERDIS;
1402 CSR_WRITE_4(sc, DC_WATCHDOG, watchdogreg);
1404 DC_SETBIT(sc, DC_WATCHDOG, DC_WDOG_JABBERDIS);
1406 DC_CLRBIT(sc, DC_NETCFG, (DC_NETCFG_PCS |
1407 DC_NETCFG_PORTSEL | DC_NETCFG_SCRAMBLER));
1408 if (sc->dc_type == DC_TYPE_98713)
1409 DC_SETBIT(sc, DC_NETCFG, (DC_NETCFG_PCS |
1410 DC_NETCFG_SCRAMBLER));
1411 if (!DC_IS_DAVICOM(sc))
1412 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL);
1413 DC_CLRBIT(sc, DC_10BTCTRL, 0xFFFF);
1414 if (DC_IS_INTEL(sc))
1415 dc_apply_fixup(sc, IFM_AUTO);
1417 if (DC_IS_PNIC(sc)) {
1418 DC_PN_GPIO_SETBIT(sc, DC_PN_GPIO_SPEEDSEL);
1419 DC_PN_GPIO_SETBIT(sc, DC_PN_GPIO_100TX_LOOP);
1420 DC_SETBIT(sc, DC_PN_NWAY, DC_PN_NWAY_SPEEDSEL);
1422 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL);
1423 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_PCS);
1424 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_SCRAMBLER);
1425 if (DC_IS_INTEL(sc))
1427 (media & IFM_GMASK) == IFM_FDX ?
1428 IFM_100_TX | IFM_FDX : IFM_100_TX);
1432 if (IFM_SUBTYPE(media) == IFM_10_T) {
1433 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_SPEEDSEL);
1434 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_HEARTBEAT);
1435 if (sc->dc_pmode == DC_PMODE_MII) {
1436 /* There's a write enable bit here that reads as 1. */
1437 if (DC_IS_INTEL(sc)) {
1438 watchdogreg = CSR_READ_4(sc, DC_WATCHDOG);
1439 watchdogreg &= ~DC_WDOG_CTLWREN;
1440 watchdogreg |= DC_WDOG_JABBERDIS;
1441 CSR_WRITE_4(sc, DC_WATCHDOG, watchdogreg);
1443 DC_SETBIT(sc, DC_WATCHDOG, DC_WDOG_JABBERDIS);
1445 DC_CLRBIT(sc, DC_NETCFG, (DC_NETCFG_PCS |
1446 DC_NETCFG_PORTSEL | DC_NETCFG_SCRAMBLER));
1447 if (sc->dc_type == DC_TYPE_98713)
1448 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_PCS);
1449 if (!DC_IS_DAVICOM(sc))
1450 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL);
1451 DC_CLRBIT(sc, DC_10BTCTRL, 0xFFFF);
1452 if (DC_IS_INTEL(sc))
1453 dc_apply_fixup(sc, IFM_AUTO);
1455 if (DC_IS_PNIC(sc)) {
1456 DC_PN_GPIO_CLRBIT(sc, DC_PN_GPIO_SPEEDSEL);
1457 DC_PN_GPIO_SETBIT(sc, DC_PN_GPIO_100TX_LOOP);
1458 DC_CLRBIT(sc, DC_PN_NWAY, DC_PN_NWAY_SPEEDSEL);
1460 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL);
1461 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_PCS);
1462 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_SCRAMBLER);
1463 if (DC_IS_INTEL(sc)) {
1464 DC_CLRBIT(sc, DC_SIARESET, DC_SIA_RESET);
1465 DC_CLRBIT(sc, DC_10BTCTRL, 0xFFFF);
1466 if ((media & IFM_GMASK) == IFM_FDX)
1467 DC_SETBIT(sc, DC_10BTCTRL, 0x7F3D);
1469 DC_SETBIT(sc, DC_10BTCTRL, 0x7F3F);
1470 DC_SETBIT(sc, DC_SIARESET, DC_SIA_RESET);
1471 DC_CLRBIT(sc, DC_10BTCTRL,
1472 DC_TCTL_AUTONEGENBL);
1474 (media & IFM_GMASK) == IFM_FDX ?
1475 IFM_10_T | IFM_FDX : IFM_10_T);
1482 * If this is a Davicom DM9102A card with a DM9801 HomePNA
1483 * PHY and we want HomePNA mode, set the portsel bit to turn
1484 * on the external MII port.
1486 if (DC_IS_DAVICOM(sc)) {
1487 if (IFM_SUBTYPE(media) == IFM_HPNA_1) {
1488 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL);
1491 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL);
1495 if ((media & IFM_GMASK) == IFM_FDX) {
1496 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_FULLDUPLEX);
1497 if (sc->dc_pmode == DC_PMODE_SYM && DC_IS_PNIC(sc))
1498 DC_SETBIT(sc, DC_PN_NWAY, DC_PN_NWAY_DUPLEX);
1500 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_FULLDUPLEX);
1501 if (sc->dc_pmode == DC_PMODE_SYM && DC_IS_PNIC(sc))
1502 DC_CLRBIT(sc, DC_PN_NWAY, DC_PN_NWAY_DUPLEX);
1506 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_TX_ON | DC_NETCFG_RX_ON);
1510 dc_reset(struct dc_softc *sc)
1514 DC_SETBIT(sc, DC_BUSCTL, DC_BUSCTL_RESET);
1516 for (i = 0; i < DC_TIMEOUT; i++) {
1518 if (!(CSR_READ_4(sc, DC_BUSCTL) & DC_BUSCTL_RESET))
1522 if (DC_IS_ASIX(sc) || DC_IS_ADMTEK(sc) || DC_IS_CONEXANT(sc) ||
1523 DC_IS_XIRCOM(sc) || DC_IS_INTEL(sc)) {
1525 DC_CLRBIT(sc, DC_BUSCTL, DC_BUSCTL_RESET);
1529 if (i == DC_TIMEOUT)
1530 printf("dc%d: reset never completed!\n", sc->dc_unit);
1532 /* Wait a little while for the chip to get its brains in order. */
1535 CSR_WRITE_4(sc, DC_IMR, 0x00000000);
1536 CSR_WRITE_4(sc, DC_BUSCTL, 0x00000000);
1537 CSR_WRITE_4(sc, DC_NETCFG, 0x00000000);
1540 * Bring the SIA out of reset. In some cases, it looks
1541 * like failing to unreset the SIA soon enough gets it
1542 * into a state where it will never come out of reset
1543 * until we reset the whole chip again.
1545 if (DC_IS_INTEL(sc)) {
1546 DC_SETBIT(sc, DC_SIARESET, DC_SIA_RESET);
1547 CSR_WRITE_4(sc, DC_10BTCTRL, 0);
1548 CSR_WRITE_4(sc, DC_WATCHDOG, 0);
1552 static struct dc_type *
1553 dc_devtype(device_t dev)
1560 while (t->dc_name != NULL) {
1561 if ((pci_get_vendor(dev) == t->dc_vid) &&
1562 (pci_get_device(dev) == t->dc_did)) {
1563 /* Check the PCI revision */
1564 rev = pci_read_config(dev, DC_PCI_CFRV, 4) & 0xFF;
1565 if (t->dc_did == DC_DEVICEID_98713 &&
1566 rev >= DC_REVISION_98713A)
1568 if (t->dc_did == DC_DEVICEID_98713_CP &&
1569 rev >= DC_REVISION_98713A)
1571 if (t->dc_did == DC_DEVICEID_987x5 &&
1572 rev >= DC_REVISION_98715AEC_C)
1574 if (t->dc_did == DC_DEVICEID_987x5 &&
1575 rev >= DC_REVISION_98725)
1577 if (t->dc_did == DC_DEVICEID_AX88140A &&
1578 rev >= DC_REVISION_88141)
1580 if (t->dc_did == DC_DEVICEID_82C168 &&
1581 rev >= DC_REVISION_82C169)
1583 if (t->dc_did == DC_DEVICEID_DM9102 &&
1584 rev >= DC_REVISION_DM9102A)
1587 * The Microsoft MN-130 has a device ID of 0x0002,
1588 * which happens to be the same as the PNIC 82c168.
1589 * To keep dc_attach() from getting confused, we
1590 * pretend its ID is something different.
1591 * XXX: ideally, dc_attach() should be checking
1592 * vendorid+deviceid together to avoid such
1595 if (t->dc_vid == DC_VENDORID_MICROSOFT &&
1596 t->dc_did == DC_DEVICEID_MSMN130)
1607 * Probe for a 21143 or clone chip. Check the PCI vendor and device
1608 * IDs against our list and return a device name if we find a match.
1609 * We do a little bit of extra work to identify the exact type of
1610 * chip. The MX98713 and MX98713A have the same PCI vendor/device ID,
1611 * but different revision IDs. The same is true for 98715/98715A
1612 * chips and the 98725, as well as the ASIX and ADMtek chips. In some
1613 * cases, the exact chip revision affects driver behavior.
1616 dc_probe(device_t dev)
1620 t = dc_devtype(dev);
1623 device_set_desc(dev, t->dc_name);
1631 dc_apply_fixup(struct dc_softc *sc, int media)
1633 struct dc_mediainfo *m;
1641 if (m->dc_media == media)
1649 for (i = 0, p = m->dc_reset_ptr; i < m->dc_reset_len; i++, p += 2) {
1650 reg = (p[0] | (p[1] << 8)) << 16;
1651 CSR_WRITE_4(sc, DC_WATCHDOG, reg);
1654 for (i = 0, p = m->dc_gp_ptr; i < m->dc_gp_len; i++, p += 2) {
1655 reg = (p[0] | (p[1] << 8)) << 16;
1656 CSR_WRITE_4(sc, DC_WATCHDOG, reg);
1661 dc_decode_leaf_sia(struct dc_softc *sc, struct dc_eblock_sia *l)
1663 struct dc_mediainfo *m;
1665 m = malloc(sizeof(struct dc_mediainfo), M_DEVBUF, M_NOWAIT | M_ZERO);
1666 switch (l->dc_sia_code & ~DC_SIA_CODE_EXT) {
1667 case DC_SIA_CODE_10BT:
1668 m->dc_media = IFM_10_T;
1670 case DC_SIA_CODE_10BT_FDX:
1671 m->dc_media = IFM_10_T | IFM_FDX;
1673 case DC_SIA_CODE_10B2:
1674 m->dc_media = IFM_10_2;
1676 case DC_SIA_CODE_10B5:
1677 m->dc_media = IFM_10_5;
1684 * We need to ignore CSR13, CSR14, CSR15 for SIA mode.
1685 * Things apparently already work for cards that do
1686 * supply Media Specific Data.
1688 if (l->dc_sia_code & DC_SIA_CODE_EXT) {
1691 (u_int8_t *)&l->dc_un.dc_sia_ext.dc_sia_gpio_ctl;
1695 (u_int8_t *)&l->dc_un.dc_sia_noext.dc_sia_gpio_ctl;
1698 m->dc_next = sc->dc_mi;
1701 sc->dc_pmode = DC_PMODE_SIA;
1705 dc_decode_leaf_sym(struct dc_softc *sc, struct dc_eblock_sym *l)
1707 struct dc_mediainfo *m;
1709 m = malloc(sizeof(struct dc_mediainfo), M_DEVBUF, M_NOWAIT | M_ZERO);
1710 if (l->dc_sym_code == DC_SYM_CODE_100BT)
1711 m->dc_media = IFM_100_TX;
1713 if (l->dc_sym_code == DC_SYM_CODE_100BT_FDX)
1714 m->dc_media = IFM_100_TX | IFM_FDX;
1717 m->dc_gp_ptr = (u_int8_t *)&l->dc_sym_gpio_ctl;
1719 m->dc_next = sc->dc_mi;
1722 sc->dc_pmode = DC_PMODE_SYM;
1726 dc_decode_leaf_mii(struct dc_softc *sc, struct dc_eblock_mii *l)
1728 struct dc_mediainfo *m;
1731 m = malloc(sizeof(struct dc_mediainfo), M_DEVBUF, M_NOWAIT | M_ZERO);
1732 /* We abuse IFM_AUTO to represent MII. */
1733 m->dc_media = IFM_AUTO;
1734 m->dc_gp_len = l->dc_gpr_len;
1737 p += sizeof(struct dc_eblock_mii);
1739 p += 2 * l->dc_gpr_len;
1740 m->dc_reset_len = *p;
1742 m->dc_reset_ptr = p;
1744 m->dc_next = sc->dc_mi;
1749 dc_read_srom(struct dc_softc *sc, int bits)
1754 sc->dc_srom = malloc(size, M_DEVBUF, M_NOWAIT);
1755 dc_read_eeprom(sc, (caddr_t)sc->dc_srom, 0, (size / 2), 0);
1759 dc_parse_21143_srom(struct dc_softc *sc)
1761 struct dc_leaf_hdr *lhdr;
1762 struct dc_eblock_hdr *hdr;
1763 int have_mii, i, loff;
1767 loff = sc->dc_srom[27];
1768 lhdr = (struct dc_leaf_hdr *)&(sc->dc_srom[loff]);
1771 ptr += sizeof(struct dc_leaf_hdr) - 1;
1773 * Look if we got a MII media block.
1775 for (i = 0; i < lhdr->dc_mcnt; i++) {
1776 hdr = (struct dc_eblock_hdr *)ptr;
1777 if (hdr->dc_type == DC_EBLOCK_MII)
1780 ptr += (hdr->dc_len & 0x7F);
1785 * Do the same thing again. Only use SIA and SYM media
1786 * blocks if no MII media block is available.
1789 ptr += sizeof(struct dc_leaf_hdr) - 1;
1790 for (i = 0; i < lhdr->dc_mcnt; i++) {
1791 hdr = (struct dc_eblock_hdr *)ptr;
1792 switch (hdr->dc_type) {
1794 dc_decode_leaf_mii(sc, (struct dc_eblock_mii *)hdr);
1798 dc_decode_leaf_sia(sc,
1799 (struct dc_eblock_sia *)hdr);
1803 dc_decode_leaf_sym(sc,
1804 (struct dc_eblock_sym *)hdr);
1807 /* Don't care. Yet. */
1810 ptr += (hdr->dc_len & 0x7F);
1816 dc_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error)
1820 KASSERT(nseg == 1, ("wrong number of segments, should be 1"));
1822 *paddr = segs->ds_addr;
1826 * Attach the interface. Allocate softc structures, do ifmedia
1827 * setup and ethernet/BPF attach.
1830 dc_attach(device_t dev)
1833 u_char eaddr[ETHER_ADDR_LEN];
1835 struct dc_softc *sc;
1838 int unit, error = 0, rid, mac_offset;
1842 sc = device_get_softc(dev);
1843 unit = device_get_unit(dev);
1845 mtx_init(&sc->dc_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
1846 MTX_DEF | MTX_RECURSE);
1849 * Map control/status registers.
1851 pci_enable_busmaster(dev);
1854 sc->dc_res = bus_alloc_resource_any(dev, DC_RES, &rid, RF_ACTIVE);
1856 if (sc->dc_res == NULL) {
1857 printf("dc%d: couldn't map ports/memory\n", unit);
1862 sc->dc_btag = rman_get_bustag(sc->dc_res);
1863 sc->dc_bhandle = rman_get_bushandle(sc->dc_res);
1865 /* Allocate interrupt. */
1867 sc->dc_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
1868 RF_SHAREABLE | RF_ACTIVE);
1870 if (sc->dc_irq == NULL) {
1871 printf("dc%d: couldn't map interrupt\n", unit);
1876 /* Need this info to decide on a chip type. */
1877 sc->dc_info = dc_devtype(dev);
1878 revision = pci_read_config(dev, DC_PCI_CFRV, 4) & 0x000000FF;
1880 /* Get the eeprom width, but PNIC and XIRCOM have diff eeprom */
1881 if (sc->dc_info->dc_did != DC_DEVICEID_82C168 &&
1882 sc->dc_info->dc_did != DC_DEVICEID_X3201)
1883 dc_eeprom_width(sc);
1885 switch (sc->dc_info->dc_did) {
1886 case DC_DEVICEID_21143:
1887 sc->dc_type = DC_TYPE_21143;
1888 sc->dc_flags |= DC_TX_POLL | DC_TX_USE_TX_INTR;
1889 sc->dc_flags |= DC_REDUCED_MII_POLL;
1890 /* Save EEPROM contents so we can parse them later. */
1891 dc_read_srom(sc, sc->dc_romwidth);
1893 case DC_DEVICEID_DM9009:
1894 case DC_DEVICEID_DM9100:
1895 case DC_DEVICEID_DM9102:
1896 sc->dc_type = DC_TYPE_DM9102;
1897 sc->dc_flags |= DC_TX_COALESCE | DC_TX_INTR_ALWAYS;
1898 sc->dc_flags |= DC_REDUCED_MII_POLL | DC_TX_STORENFWD;
1899 sc->dc_flags |= DC_TX_ALIGN;
1900 sc->dc_pmode = DC_PMODE_MII;
1901 /* Increase the latency timer value. */
1902 command = pci_read_config(dev, DC_PCI_CFLT, 4);
1903 command &= 0xFFFF00FF;
1904 command |= 0x00008000;
1905 pci_write_config(dev, DC_PCI_CFLT, command, 4);
1907 case DC_DEVICEID_AL981:
1908 sc->dc_type = DC_TYPE_AL981;
1909 sc->dc_flags |= DC_TX_USE_TX_INTR;
1910 sc->dc_flags |= DC_TX_ADMTEK_WAR;
1911 sc->dc_pmode = DC_PMODE_MII;
1912 dc_read_srom(sc, sc->dc_romwidth);
1914 case DC_DEVICEID_AN985:
1915 case DC_DEVICEID_ADM9511:
1916 case DC_DEVICEID_ADM9513:
1917 case DC_DEVICEID_FA511:
1918 case DC_DEVICEID_FE2500:
1919 case DC_DEVICEID_EN2242:
1920 case DC_DEVICEID_HAWKING_PN672TX:
1921 case DC_DEVICEID_3CSOHOB:
1922 case DC_DEVICEID_MSMN120:
1923 case DC_DEVICEID_MSMN130_FAKE: /* XXX avoid collision with PNIC*/
1924 sc->dc_type = DC_TYPE_AN985;
1925 sc->dc_flags |= DC_64BIT_HASH;
1926 sc->dc_flags |= DC_TX_USE_TX_INTR;
1927 sc->dc_flags |= DC_TX_ADMTEK_WAR;
1928 sc->dc_pmode = DC_PMODE_MII;
1929 /* Don't read SROM for - auto-loaded on reset */
1931 case DC_DEVICEID_98713:
1932 case DC_DEVICEID_98713_CP:
1933 if (revision < DC_REVISION_98713A) {
1934 sc->dc_type = DC_TYPE_98713;
1936 if (revision >= DC_REVISION_98713A) {
1937 sc->dc_type = DC_TYPE_98713A;
1938 sc->dc_flags |= DC_21143_NWAY;
1940 sc->dc_flags |= DC_REDUCED_MII_POLL;
1941 sc->dc_flags |= DC_TX_POLL | DC_TX_USE_TX_INTR;
1943 case DC_DEVICEID_987x5:
1944 case DC_DEVICEID_EN1217:
1946 * Macronix MX98715AEC-C/D/E parts have only a
1947 * 128-bit hash table. We need to deal with these
1948 * in the same manner as the PNIC II so that we
1949 * get the right number of bits out of the
1952 if (revision >= DC_REVISION_98715AEC_C &&
1953 revision < DC_REVISION_98725)
1954 sc->dc_flags |= DC_128BIT_HASH;
1955 sc->dc_type = DC_TYPE_987x5;
1956 sc->dc_flags |= DC_TX_POLL | DC_TX_USE_TX_INTR;
1957 sc->dc_flags |= DC_REDUCED_MII_POLL | DC_21143_NWAY;
1959 case DC_DEVICEID_98727:
1960 sc->dc_type = DC_TYPE_987x5;
1961 sc->dc_flags |= DC_TX_POLL | DC_TX_USE_TX_INTR;
1962 sc->dc_flags |= DC_REDUCED_MII_POLL | DC_21143_NWAY;
1964 case DC_DEVICEID_82C115:
1965 sc->dc_type = DC_TYPE_PNICII;
1966 sc->dc_flags |= DC_TX_POLL | DC_TX_USE_TX_INTR | DC_128BIT_HASH;
1967 sc->dc_flags |= DC_REDUCED_MII_POLL | DC_21143_NWAY;
1969 case DC_DEVICEID_82C168:
1970 sc->dc_type = DC_TYPE_PNIC;
1971 sc->dc_flags |= DC_TX_STORENFWD | DC_TX_INTR_ALWAYS;
1972 sc->dc_flags |= DC_PNIC_RX_BUG_WAR;
1973 sc->dc_pnic_rx_buf = malloc(DC_RXLEN * 5, M_DEVBUF, M_NOWAIT);
1974 if (revision < DC_REVISION_82C169)
1975 sc->dc_pmode = DC_PMODE_SYM;
1977 case DC_DEVICEID_AX88140A:
1978 sc->dc_type = DC_TYPE_ASIX;
1979 sc->dc_flags |= DC_TX_USE_TX_INTR | DC_TX_INTR_FIRSTFRAG;
1980 sc->dc_flags |= DC_REDUCED_MII_POLL;
1981 sc->dc_pmode = DC_PMODE_MII;
1983 case DC_DEVICEID_X3201:
1984 sc->dc_type = DC_TYPE_XIRCOM;
1985 sc->dc_flags |= DC_TX_INTR_ALWAYS | DC_TX_COALESCE |
1988 * We don't actually need to coalesce, but we're doing
1989 * it to obtain a double word aligned buffer.
1990 * The DC_TX_COALESCE flag is required.
1992 sc->dc_pmode = DC_PMODE_MII;
1994 case DC_DEVICEID_RS7112:
1995 sc->dc_type = DC_TYPE_CONEXANT;
1996 sc->dc_flags |= DC_TX_INTR_ALWAYS;
1997 sc->dc_flags |= DC_REDUCED_MII_POLL;
1998 sc->dc_pmode = DC_PMODE_MII;
1999 dc_read_srom(sc, sc->dc_romwidth);
2002 printf("dc%d: unknown device: %x\n", sc->dc_unit,
2003 sc->dc_info->dc_did);
2007 /* Save the cache line size. */
2008 if (DC_IS_DAVICOM(sc))
2009 sc->dc_cachesize = 0;
2011 sc->dc_cachesize = pci_read_config(dev,
2012 DC_PCI_CFLT, 4) & 0xFF;
2014 /* Reset the adapter. */
2017 /* Take 21143 out of snooze mode */
2018 if (DC_IS_INTEL(sc) || DC_IS_XIRCOM(sc)) {
2019 command = pci_read_config(dev, DC_PCI_CFDD, 4);
2020 command &= ~(DC_CFDD_SNOOZE_MODE | DC_CFDD_SLEEP_MODE);
2021 pci_write_config(dev, DC_PCI_CFDD, command, 4);
2025 * Try to learn something about the supported media.
2026 * We know that ASIX and ADMtek and Davicom devices
2027 * will *always* be using MII media, so that's a no-brainer.
2028 * The tricky ones are the Macronix/PNIC II and the
2031 if (DC_IS_INTEL(sc))
2032 dc_parse_21143_srom(sc);
2033 else if (DC_IS_MACRONIX(sc) || DC_IS_PNICII(sc)) {
2034 if (sc->dc_type == DC_TYPE_98713)
2035 sc->dc_pmode = DC_PMODE_MII;
2037 sc->dc_pmode = DC_PMODE_SYM;
2038 } else if (!sc->dc_pmode)
2039 sc->dc_pmode = DC_PMODE_MII;
2042 * Get station address from the EEPROM.
2044 switch(sc->dc_type) {
2046 case DC_TYPE_98713A:
2048 case DC_TYPE_PNICII:
2049 dc_read_eeprom(sc, (caddr_t)&mac_offset,
2050 (DC_EE_NODEADDR_OFFSET / 2), 1, 0);
2051 dc_read_eeprom(sc, (caddr_t)&eaddr, (mac_offset / 2), 3, 0);
2054 dc_read_eeprom(sc, (caddr_t)&eaddr, 0, 3, 1);
2056 case DC_TYPE_DM9102:
2057 dc_read_eeprom(sc, (caddr_t)&eaddr, DC_EE_NODEADDR, 3, 0);
2060 * If this is an onboard dc(4) the station address read from
2061 * the EEPROM is all zero and we have to get it from the fcode.
2063 for (i = 0; i < ETHER_ADDR_LEN; i++)
2064 if (eaddr[i] != 0x00)
2066 if (i >= ETHER_ADDR_LEN)
2067 OF_getetheraddr(dev, eaddr);
2072 dc_read_eeprom(sc, (caddr_t)&eaddr, DC_EE_NODEADDR, 3, 0);
2076 *(u_int32_t *)(&eaddr[0]) = CSR_READ_4(sc, DC_AL_PAR0);
2077 *(u_int16_t *)(&eaddr[4]) = CSR_READ_4(sc, DC_AL_PAR1);
2079 case DC_TYPE_CONEXANT:
2080 bcopy(sc->dc_srom + DC_CONEXANT_EE_NODEADDR, &eaddr,
2083 case DC_TYPE_XIRCOM:
2084 /* The MAC comes from the CIS. */
2085 mac = pci_get_ether(dev);
2087 device_printf(dev, "No station address in CIS!\n");
2091 bcopy(mac, eaddr, ETHER_ADDR_LEN);
2094 dc_read_eeprom(sc, (caddr_t)&eaddr, DC_EE_NODEADDR, 3, 0);
2099 bcopy(eaddr, &sc->arpcom.ac_enaddr, ETHER_ADDR_LEN);
2101 /* Allocate a busdma tag and DMA safe memory for TX/RX descriptors. */
2102 error = bus_dma_tag_create(NULL, PAGE_SIZE, 0, BUS_SPACE_MAXADDR_32BIT,
2103 BUS_SPACE_MAXADDR, NULL, NULL, sizeof(struct dc_list_data), 1,
2104 sizeof(struct dc_list_data), 0, NULL, NULL, &sc->dc_ltag);
2106 printf("dc%d: failed to allocate busdma tag\n", unit);
2110 error = bus_dmamem_alloc(sc->dc_ltag, (void **)&sc->dc_ldata,
2111 BUS_DMA_NOWAIT | BUS_DMA_ZERO, &sc->dc_lmap);
2113 printf("dc%d: failed to allocate DMA safe memory\n", unit);
2117 error = bus_dmamap_load(sc->dc_ltag, sc->dc_lmap, sc->dc_ldata,
2118 sizeof(struct dc_list_data), dc_dma_map_addr, &sc->dc_laddr,
2121 printf("dc%d: cannot get address of the descriptors\n", unit);
2127 * Allocate a busdma tag and DMA safe memory for the multicast
2130 error = bus_dma_tag_create(NULL, PAGE_SIZE, 0, BUS_SPACE_MAXADDR_32BIT,
2131 BUS_SPACE_MAXADDR, NULL, NULL, DC_SFRAME_LEN + DC_MIN_FRAMELEN, 1,
2132 DC_SFRAME_LEN + DC_MIN_FRAMELEN, 0, NULL, NULL, &sc->dc_stag);
2134 printf("dc%d: failed to allocate busdma tag\n", unit);
2138 error = bus_dmamem_alloc(sc->dc_stag, (void **)&sc->dc_cdata.dc_sbuf,
2139 BUS_DMA_NOWAIT, &sc->dc_smap);
2141 printf("dc%d: failed to allocate DMA safe memory\n", unit);
2145 error = bus_dmamap_load(sc->dc_stag, sc->dc_smap, sc->dc_cdata.dc_sbuf,
2146 DC_SFRAME_LEN, dc_dma_map_addr, &sc->dc_saddr, BUS_DMA_NOWAIT);
2148 printf("dc%d: cannot get address of the descriptors\n", unit);
2153 /* Allocate a busdma tag for mbufs. */
2154 error = bus_dma_tag_create(NULL, PAGE_SIZE, 0, BUS_SPACE_MAXADDR_32BIT,
2155 BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES * DC_TX_LIST_CNT,
2156 DC_TX_LIST_CNT, MCLBYTES, 0, NULL, NULL, &sc->dc_mtag);
2158 printf("dc%d: failed to allocate busdma tag\n", unit);
2163 /* Create the TX/RX busdma maps. */
2164 for (i = 0; i < DC_TX_LIST_CNT; i++) {
2165 error = bus_dmamap_create(sc->dc_mtag, 0,
2166 &sc->dc_cdata.dc_tx_map[i]);
2168 printf("dc%d: failed to init TX ring\n", unit);
2173 for (i = 0; i < DC_RX_LIST_CNT; i++) {
2174 error = bus_dmamap_create(sc->dc_mtag, 0,
2175 &sc->dc_cdata.dc_rx_map[i]);
2177 printf("dc%d: failed to init RX ring\n", unit);
2182 error = bus_dmamap_create(sc->dc_mtag, 0, &sc->dc_sparemap);
2184 printf("dc%d: failed to init RX ring\n", unit);
2189 ifp = &sc->arpcom.ac_if;
2191 if_initname(ifp, device_get_name(dev), device_get_unit(dev));
2192 /* XXX: bleah, MTU gets overwritten in ether_ifattach() */
2193 ifp->if_mtu = ETHERMTU;
2194 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
2196 ifp->if_flags |= IFF_NEEDSGIANT;
2197 ifp->if_ioctl = dc_ioctl;
2198 ifp->if_start = dc_start;
2199 ifp->if_watchdog = dc_watchdog;
2200 ifp->if_init = dc_init;
2201 ifp->if_baudrate = 10000000;
2202 IFQ_SET_MAXLEN(&ifp->if_snd, DC_TX_LIST_CNT - 1);
2203 ifp->if_snd.ifq_drv_maxlen = DC_TX_LIST_CNT - 1;
2204 IFQ_SET_READY(&ifp->if_snd);
2207 * Do MII setup. If this is a 21143, check for a PHY on the
2208 * MII bus after applying any necessary fixups to twiddle the
2209 * GPIO bits. If we don't end up finding a PHY, restore the
2210 * old selection (SIA only or SIA/SYM) and attach the dcphy
2213 if (DC_IS_INTEL(sc)) {
2214 dc_apply_fixup(sc, IFM_AUTO);
2216 sc->dc_pmode = DC_PMODE_MII;
2219 error = mii_phy_probe(dev, &sc->dc_miibus,
2220 dc_ifmedia_upd, dc_ifmedia_sts);
2222 if (error && DC_IS_INTEL(sc)) {
2224 if (sc->dc_pmode != DC_PMODE_SIA)
2225 sc->dc_pmode = DC_PMODE_SYM;
2226 sc->dc_flags |= DC_21143_NWAY;
2227 mii_phy_probe(dev, &sc->dc_miibus,
2228 dc_ifmedia_upd, dc_ifmedia_sts);
2230 * For non-MII cards, we need to have the 21143
2231 * drive the LEDs. Except there are some systems
2232 * like the NEC VersaPro NoteBook PC which have no
2233 * LEDs, and twiddling these bits has adverse effects
2234 * on them. (I.e. you suddenly can't get a link.)
2236 if (pci_read_config(dev, DC_PCI_CSID, 4) != 0x80281033)
2237 sc->dc_flags |= DC_TULIP_LEDS;
2242 printf("dc%d: MII without any PHY!\n", sc->dc_unit);
2246 if (DC_IS_XIRCOM(sc)) {
2248 * setup General Purpose Port mode and data so the tulip
2249 * can talk to the MII.
2251 CSR_WRITE_4(sc, DC_SIAGP, DC_SIAGP_WRITE_EN | DC_SIAGP_INT1_EN |
2252 DC_SIAGP_MD_GP2_OUTPUT | DC_SIAGP_MD_GP0_OUTPUT);
2254 CSR_WRITE_4(sc, DC_SIAGP, DC_SIAGP_INT1_EN |
2255 DC_SIAGP_MD_GP2_OUTPUT | DC_SIAGP_MD_GP0_OUTPUT);
2259 if (DC_IS_ADMTEK(sc)) {
2261 * Set automatic TX underrun recovery for the ADMtek chips
2263 DC_SETBIT(sc, DC_AL_CR, DC_AL_CR_ATUR);
2267 * Tell the upper layer(s) we support long frames.
2269 ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header);
2270 ifp->if_capabilities |= IFCAP_VLAN_MTU;
2271 #ifdef DEVICE_POLLING
2272 ifp->if_capabilities |= IFCAP_POLLING;
2274 ifp->if_capenable = ifp->if_capabilities;
2276 callout_init(&sc->dc_stat_ch, IS_MPSAFE ? CALLOUT_MPSAFE : 0);
2279 sc->dc_srm_media = 0;
2281 /* Remember the SRM console media setting */
2282 if (DC_IS_INTEL(sc)) {
2283 command = pci_read_config(dev, DC_PCI_CFDD, 4);
2284 command &= ~(DC_CFDD_SNOOZE_MODE | DC_CFDD_SLEEP_MODE);
2285 switch ((command >> 8) & 0xff) {
2287 sc->dc_srm_media = IFM_10_T;
2290 sc->dc_srm_media = IFM_10_T | IFM_FDX;
2293 sc->dc_srm_media = IFM_100_TX;
2296 sc->dc_srm_media = IFM_100_TX | IFM_FDX;
2299 if (sc->dc_srm_media)
2300 sc->dc_srm_media |= IFM_ACTIVE | IFM_ETHER;
2305 * Call MI attach routine.
2307 ether_ifattach(ifp, eaddr);
2309 /* Hook interrupt last to avoid having to lock softc */
2310 error = bus_setup_intr(dev, sc->dc_irq, INTR_TYPE_NET |
2311 (IS_MPSAFE ? INTR_MPSAFE : 0),
2312 dc_intr, sc, &sc->dc_intrhand);
2315 printf("dc%d: couldn't set up irq\n", unit);
2316 ether_ifdetach(ifp);
2327 * Shutdown hardware and free up resources. This can be called any
2328 * time after the mutex has been initialized. It is called in both
2329 * the error case in attach and the normal detach case so it needs
2330 * to be careful about only freeing resources that have actually been
2334 dc_detach(device_t dev)
2336 struct dc_softc *sc;
2338 struct dc_mediainfo *m;
2341 sc = device_get_softc(dev);
2342 KASSERT(mtx_initialized(&sc->dc_mtx), ("dc mutex not initialized"));
2345 ifp = &sc->arpcom.ac_if;
2347 /* These should only be active if attach succeeded */
2348 if (device_is_attached(dev)) {
2350 ether_ifdetach(ifp);
2353 device_delete_child(dev, sc->dc_miibus);
2354 bus_generic_detach(dev);
2356 if (sc->dc_intrhand)
2357 bus_teardown_intr(dev, sc->dc_irq, sc->dc_intrhand);
2359 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->dc_irq);
2361 bus_release_resource(dev, DC_RES, DC_RID, sc->dc_res);
2363 if (sc->dc_cdata.dc_sbuf != NULL)
2364 bus_dmamem_free(sc->dc_stag, sc->dc_cdata.dc_sbuf, sc->dc_smap);
2365 if (sc->dc_ldata != NULL)
2366 bus_dmamem_free(sc->dc_ltag, sc->dc_ldata, sc->dc_lmap);
2367 for (i = 0; i < DC_TX_LIST_CNT; i++)
2368 bus_dmamap_destroy(sc->dc_mtag, sc->dc_cdata.dc_tx_map[i]);
2369 for (i = 0; i < DC_RX_LIST_CNT; i++)
2370 bus_dmamap_destroy(sc->dc_mtag, sc->dc_cdata.dc_rx_map[i]);
2371 bus_dmamap_destroy(sc->dc_mtag, sc->dc_sparemap);
2373 bus_dma_tag_destroy(sc->dc_stag);
2375 bus_dma_tag_destroy(sc->dc_mtag);
2377 bus_dma_tag_destroy(sc->dc_ltag);
2379 free(sc->dc_pnic_rx_buf, M_DEVBUF);
2381 while (sc->dc_mi != NULL) {
2382 m = sc->dc_mi->dc_next;
2383 free(sc->dc_mi, M_DEVBUF);
2386 free(sc->dc_srom, M_DEVBUF);
2389 mtx_destroy(&sc->dc_mtx);
2395 * Initialize the transmit descriptors.
2398 dc_list_tx_init(struct dc_softc *sc)
2400 struct dc_chain_data *cd;
2401 struct dc_list_data *ld;
2406 for (i = 0; i < DC_TX_LIST_CNT; i++) {
2407 if (i == DC_TX_LIST_CNT - 1)
2411 ld->dc_tx_list[i].dc_next = htole32(DC_TXDESC(sc, nexti));
2412 cd->dc_tx_chain[i] = NULL;
2413 ld->dc_tx_list[i].dc_data = 0;
2414 ld->dc_tx_list[i].dc_ctl = 0;
2417 cd->dc_tx_prod = cd->dc_tx_cons = cd->dc_tx_cnt = 0;
2418 bus_dmamap_sync(sc->dc_ltag, sc->dc_lmap,
2419 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
2425 * Initialize the RX descriptors and allocate mbufs for them. Note that
2426 * we arrange the descriptors in a closed ring, so that the last descriptor
2427 * points back to the first.
2430 dc_list_rx_init(struct dc_softc *sc)
2432 struct dc_chain_data *cd;
2433 struct dc_list_data *ld;
2439 for (i = 0; i < DC_RX_LIST_CNT; i++) {
2440 if (dc_newbuf(sc, i, 1) != 0)
2442 if (i == DC_RX_LIST_CNT - 1)
2446 ld->dc_rx_list[i].dc_next = htole32(DC_RXDESC(sc, nexti));
2450 bus_dmamap_sync(sc->dc_ltag, sc->dc_lmap,
2451 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
2456 dc_dma_map_rxbuf(arg, segs, nseg, mapsize, error)
2458 bus_dma_segment_t *segs;
2463 struct dc_softc *sc;
2467 c = &sc->dc_ldata->dc_rx_list[sc->dc_cdata.dc_rx_cur];
2469 sc->dc_cdata.dc_rx_err = error;
2473 KASSERT(nseg == 1, ("wrong number of segments, should be 1"));
2474 sc->dc_cdata.dc_rx_err = 0;
2475 c->dc_data = htole32(segs->ds_addr);
2479 * Initialize an RX descriptor and attach an MBUF cluster.
2482 dc_newbuf(struct dc_softc *sc, int i, int alloc)
2489 m_new = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
2493 m_new = sc->dc_cdata.dc_rx_chain[i];
2494 m_new->m_data = m_new->m_ext.ext_buf;
2496 m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
2497 m_adj(m_new, sizeof(u_int64_t));
2500 * If this is a PNIC chip, zero the buffer. This is part
2501 * of the workaround for the receive bug in the 82c168 and
2504 if (sc->dc_flags & DC_PNIC_RX_BUG_WAR)
2505 bzero(mtod(m_new, char *), m_new->m_len);
2507 /* No need to remap the mbuf if we're reusing it. */
2509 sc->dc_cdata.dc_rx_cur = i;
2510 error = bus_dmamap_load_mbuf(sc->dc_mtag, sc->dc_sparemap,
2511 m_new, dc_dma_map_rxbuf, sc, 0);
2516 if (sc->dc_cdata.dc_rx_err != 0) {
2518 return (sc->dc_cdata.dc_rx_err);
2520 bus_dmamap_unload(sc->dc_mtag, sc->dc_cdata.dc_rx_map[i]);
2521 tmp = sc->dc_cdata.dc_rx_map[i];
2522 sc->dc_cdata.dc_rx_map[i] = sc->dc_sparemap;
2523 sc->dc_sparemap = tmp;
2524 sc->dc_cdata.dc_rx_chain[i] = m_new;
2527 sc->dc_ldata->dc_rx_list[i].dc_ctl = htole32(DC_RXCTL_RLINK | DC_RXLEN);
2528 sc->dc_ldata->dc_rx_list[i].dc_status = htole32(DC_RXSTAT_OWN);
2529 bus_dmamap_sync(sc->dc_mtag, sc->dc_cdata.dc_rx_map[i],
2530 BUS_DMASYNC_PREREAD);
2531 bus_dmamap_sync(sc->dc_ltag, sc->dc_lmap,
2532 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
2538 * The PNIC chip has a terrible bug in it that manifests itself during
2539 * periods of heavy activity. The exact mode of failure if difficult to
2540 * pinpoint: sometimes it only happens in promiscuous mode, sometimes it
2541 * will happen on slow machines. The bug is that sometimes instead of
2542 * uploading one complete frame during reception, it uploads what looks
2543 * like the entire contents of its FIFO memory. The frame we want is at
2544 * the end of the whole mess, but we never know exactly how much data has
2545 * been uploaded, so salvaging the frame is hard.
2547 * There is only one way to do it reliably, and it's disgusting.
2548 * Here's what we know:
2550 * - We know there will always be somewhere between one and three extra
2551 * descriptors uploaded.
2553 * - We know the desired received frame will always be at the end of the
2554 * total data upload.
2556 * - We know the size of the desired received frame because it will be
2557 * provided in the length field of the status word in the last descriptor.
2559 * Here's what we do:
2561 * - When we allocate buffers for the receive ring, we bzero() them.
2562 * This means that we know that the buffer contents should be all
2563 * zeros, except for data uploaded by the chip.
2565 * - We also force the PNIC chip to upload frames that include the
2566 * ethernet CRC at the end.
2568 * - We gather all of the bogus frame data into a single buffer.
2570 * - We then position a pointer at the end of this buffer and scan
2571 * backwards until we encounter the first non-zero byte of data.
2572 * This is the end of the received frame. We know we will encounter
2573 * some data at the end of the frame because the CRC will always be
2574 * there, so even if the sender transmits a packet of all zeros,
2575 * we won't be fooled.
2577 * - We know the size of the actual received frame, so we subtract
2578 * that value from the current pointer location. This brings us
2579 * to the start of the actual received packet.
2581 * - We copy this into an mbuf and pass it on, along with the actual
2584 * The performance hit is tremendous, but it beats dropping frames all
2588 #define DC_WHOLEFRAME (DC_RXSTAT_FIRSTFRAG | DC_RXSTAT_LASTFRAG)
2590 dc_pnic_rx_bug_war(struct dc_softc *sc, int idx)
2592 struct dc_desc *cur_rx;
2593 struct dc_desc *c = NULL;
2594 struct mbuf *m = NULL;
2597 u_int32_t rxstat = 0;
2599 i = sc->dc_pnic_rx_bug_save;
2600 cur_rx = &sc->dc_ldata->dc_rx_list[idx];
2601 ptr = sc->dc_pnic_rx_buf;
2602 bzero(ptr, DC_RXLEN * 5);
2604 /* Copy all the bytes from the bogus buffers. */
2606 c = &sc->dc_ldata->dc_rx_list[i];
2607 rxstat = le32toh(c->dc_status);
2608 m = sc->dc_cdata.dc_rx_chain[i];
2609 bcopy(mtod(m, char *), ptr, DC_RXLEN);
2611 /* If this is the last buffer, break out. */
2612 if (i == idx || rxstat & DC_RXSTAT_LASTFRAG)
2614 dc_newbuf(sc, i, 0);
2615 DC_INC(i, DC_RX_LIST_CNT);
2618 /* Find the length of the actual receive frame. */
2619 total_len = DC_RXBYTES(rxstat);
2621 /* Scan backwards until we hit a non-zero byte. */
2622 while (*ptr == 0x00)
2626 if ((uintptr_t)(ptr) & 0x3)
2629 /* Now find the start of the frame. */
2631 if (ptr < sc->dc_pnic_rx_buf)
2632 ptr = sc->dc_pnic_rx_buf;
2635 * Now copy the salvaged frame to the last mbuf and fake up
2636 * the status word to make it look like a successful
2639 dc_newbuf(sc, i, 0);
2640 bcopy(ptr, mtod(m, char *), total_len);
2641 cur_rx->dc_status = htole32(rxstat | DC_RXSTAT_FIRSTFRAG);
2645 * This routine searches the RX ring for dirty descriptors in the
2646 * event that the rxeof routine falls out of sync with the chip's
2647 * current descriptor pointer. This may happen sometimes as a result
2648 * of a "no RX buffer available" condition that happens when the chip
2649 * consumes all of the RX buffers before the driver has a chance to
2650 * process the RX ring. This routine may need to be called more than
2651 * once to bring the driver back in sync with the chip, however we
2652 * should still be getting RX DONE interrupts to drive the search
2653 * for new packets in the RX ring, so we should catch up eventually.
2656 dc_rx_resync(struct dc_softc *sc)
2658 struct dc_desc *cur_rx;
2661 pos = sc->dc_cdata.dc_rx_prod;
2663 for (i = 0; i < DC_RX_LIST_CNT; i++) {
2664 cur_rx = &sc->dc_ldata->dc_rx_list[pos];
2665 if (!(le32toh(cur_rx->dc_status) & DC_RXSTAT_OWN))
2667 DC_INC(pos, DC_RX_LIST_CNT);
2670 /* If the ring really is empty, then just return. */
2671 if (i == DC_RX_LIST_CNT)
2674 /* We've fallen behing the chip: catch it. */
2675 sc->dc_cdata.dc_rx_prod = pos;
2681 * A frame has been uploaded: pass the resulting mbuf chain up to
2682 * the higher level protocols.
2685 dc_rxeof(struct dc_softc *sc)
2689 struct dc_desc *cur_rx;
2690 int i, total_len = 0;
2695 ifp = &sc->arpcom.ac_if;
2696 i = sc->dc_cdata.dc_rx_prod;
2698 bus_dmamap_sync(sc->dc_ltag, sc->dc_lmap, BUS_DMASYNC_POSTREAD);
2699 while (!(le32toh(sc->dc_ldata->dc_rx_list[i].dc_status) &
2701 #ifdef DEVICE_POLLING
2702 if (ifp->if_flags & IFF_POLLING) {
2703 if (sc->rxcycles <= 0)
2708 cur_rx = &sc->dc_ldata->dc_rx_list[i];
2709 rxstat = le32toh(cur_rx->dc_status);
2710 m = sc->dc_cdata.dc_rx_chain[i];
2711 bus_dmamap_sync(sc->dc_mtag, sc->dc_cdata.dc_rx_map[i],
2712 BUS_DMASYNC_POSTREAD);
2713 total_len = DC_RXBYTES(rxstat);
2715 if (sc->dc_flags & DC_PNIC_RX_BUG_WAR) {
2716 if ((rxstat & DC_WHOLEFRAME) != DC_WHOLEFRAME) {
2717 if (rxstat & DC_RXSTAT_FIRSTFRAG)
2718 sc->dc_pnic_rx_bug_save = i;
2719 if ((rxstat & DC_RXSTAT_LASTFRAG) == 0) {
2720 DC_INC(i, DC_RX_LIST_CNT);
2723 dc_pnic_rx_bug_war(sc, i);
2724 rxstat = le32toh(cur_rx->dc_status);
2725 total_len = DC_RXBYTES(rxstat);
2730 * If an error occurs, update stats, clear the
2731 * status word and leave the mbuf cluster in place:
2732 * it should simply get re-used next time this descriptor
2733 * comes up in the ring. However, don't report long
2734 * frames as errors since they could be vlans.
2736 if ((rxstat & DC_RXSTAT_RXERR)) {
2737 if (!(rxstat & DC_RXSTAT_GIANT) ||
2738 (rxstat & (DC_RXSTAT_CRCERR | DC_RXSTAT_DRIBBLE |
2739 DC_RXSTAT_MIIERE | DC_RXSTAT_COLLSEEN |
2740 DC_RXSTAT_RUNT | DC_RXSTAT_DE))) {
2742 if (rxstat & DC_RXSTAT_COLLSEEN)
2743 ifp->if_collisions++;
2744 dc_newbuf(sc, i, 0);
2745 if (rxstat & DC_RXSTAT_CRCERR) {
2746 DC_INC(i, DC_RX_LIST_CNT);
2755 /* No errors; receive the packet. */
2756 total_len -= ETHER_CRC_LEN;
2759 * On the x86 we do not have alignment problems, so try to
2760 * allocate a new buffer for the receive ring, and pass up
2761 * the one where the packet is already, saving the expensive
2762 * copy done in m_devget().
2763 * If we are on an architecture with alignment problems, or
2764 * if the allocation fails, then use m_devget and leave the
2765 * existing buffer in the receive ring.
2767 if (dc_quick && dc_newbuf(sc, i, 1) == 0) {
2768 m->m_pkthdr.rcvif = ifp;
2769 m->m_pkthdr.len = m->m_len = total_len;
2770 DC_INC(i, DC_RX_LIST_CNT);
2776 m0 = m_devget(mtod(m, char *), total_len,
2777 ETHER_ALIGN, ifp, NULL);
2778 dc_newbuf(sc, i, 0);
2779 DC_INC(i, DC_RX_LIST_CNT);
2789 (*ifp->if_input)(ifp, m);
2793 sc->dc_cdata.dc_rx_prod = i;
2797 * A frame was downloaded to the chip. It's safe for us to clean up
2802 dc_txeof(struct dc_softc *sc)
2804 struct dc_desc *cur_tx = NULL;
2807 u_int32_t ctl, txstat;
2809 ifp = &sc->arpcom.ac_if;
2812 * Go through our tx list and free mbufs for those
2813 * frames that have been transmitted.
2815 bus_dmamap_sync(sc->dc_ltag, sc->dc_lmap, BUS_DMASYNC_POSTREAD);
2816 idx = sc->dc_cdata.dc_tx_cons;
2817 while (idx != sc->dc_cdata.dc_tx_prod) {
2819 cur_tx = &sc->dc_ldata->dc_tx_list[idx];
2820 txstat = le32toh(cur_tx->dc_status);
2821 ctl = le32toh(cur_tx->dc_ctl);
2823 if (txstat & DC_TXSTAT_OWN)
2826 if (!(ctl & DC_TXCTL_LASTFRAG) || ctl & DC_TXCTL_SETUP) {
2827 if (ctl & DC_TXCTL_SETUP) {
2829 * Yes, the PNIC is so brain damaged
2830 * that it will sometimes generate a TX
2831 * underrun error while DMAing the RX
2832 * filter setup frame. If we detect this,
2833 * we have to send the setup frame again,
2834 * or else the filter won't be programmed
2837 if (DC_IS_PNIC(sc)) {
2838 if (txstat & DC_TXSTAT_ERRSUM)
2841 sc->dc_cdata.dc_tx_chain[idx] = NULL;
2843 sc->dc_cdata.dc_tx_cnt--;
2844 DC_INC(idx, DC_TX_LIST_CNT);
2848 if (DC_IS_XIRCOM(sc) || DC_IS_CONEXANT(sc)) {
2850 * XXX: Why does my Xircom taunt me so?
2851 * For some reason it likes setting the CARRLOST flag
2852 * even when the carrier is there. wtf?!?
2853 * Who knows, but Conexant chips have the
2854 * same problem. Maybe they took lessons
2857 if (/*sc->dc_type == DC_TYPE_21143 &&*/
2858 sc->dc_pmode == DC_PMODE_MII &&
2859 ((txstat & 0xFFFF) & ~(DC_TXSTAT_ERRSUM |
2860 DC_TXSTAT_NOCARRIER)))
2861 txstat &= ~DC_TXSTAT_ERRSUM;
2863 if (/*sc->dc_type == DC_TYPE_21143 &&*/
2864 sc->dc_pmode == DC_PMODE_MII &&
2865 ((txstat & 0xFFFF) & ~(DC_TXSTAT_ERRSUM |
2866 DC_TXSTAT_NOCARRIER | DC_TXSTAT_CARRLOST)))
2867 txstat &= ~DC_TXSTAT_ERRSUM;
2870 if (txstat & DC_TXSTAT_ERRSUM) {
2872 if (txstat & DC_TXSTAT_EXCESSCOLL)
2873 ifp->if_collisions++;
2874 if (txstat & DC_TXSTAT_LATECOLL)
2875 ifp->if_collisions++;
2876 if (!(txstat & DC_TXSTAT_UNDERRUN)) {
2882 ifp->if_collisions += (txstat & DC_TXSTAT_COLLCNT) >> 3;
2885 if (sc->dc_cdata.dc_tx_chain[idx] != NULL) {
2886 bus_dmamap_sync(sc->dc_mtag,
2887 sc->dc_cdata.dc_tx_map[idx],
2888 BUS_DMASYNC_POSTWRITE);
2889 bus_dmamap_unload(sc->dc_mtag,
2890 sc->dc_cdata.dc_tx_map[idx]);
2891 m_freem(sc->dc_cdata.dc_tx_chain[idx]);
2892 sc->dc_cdata.dc_tx_chain[idx] = NULL;
2895 sc->dc_cdata.dc_tx_cnt--;
2896 DC_INC(idx, DC_TX_LIST_CNT);
2899 if (idx != sc->dc_cdata.dc_tx_cons) {
2900 /* Some buffers have been freed. */
2901 sc->dc_cdata.dc_tx_cons = idx;
2902 ifp->if_flags &= ~IFF_OACTIVE;
2904 ifp->if_timer = (sc->dc_cdata.dc_tx_cnt == 0) ? 0 : 5;
2910 struct dc_softc *sc;
2911 struct mii_data *mii;
2917 ifp = &sc->arpcom.ac_if;
2918 mii = device_get_softc(sc->dc_miibus);
2920 if (sc->dc_flags & DC_REDUCED_MII_POLL) {
2921 if (sc->dc_flags & DC_21143_NWAY) {
2922 r = CSR_READ_4(sc, DC_10BTSTAT);
2923 if (IFM_SUBTYPE(mii->mii_media_active) ==
2924 IFM_100_TX && (r & DC_TSTAT_LS100)) {
2928 if (IFM_SUBTYPE(mii->mii_media_active) ==
2929 IFM_10_T && (r & DC_TSTAT_LS10)) {
2933 if (sc->dc_link == 0)
2936 r = CSR_READ_4(sc, DC_ISR);
2937 if ((r & DC_ISR_RX_STATE) == DC_RXSTATE_WAIT &&
2938 sc->dc_cdata.dc_tx_cnt == 0) {
2940 if (!(mii->mii_media_status & IFM_ACTIVE))
2948 * When the init routine completes, we expect to be able to send
2949 * packets right away, and in fact the network code will send a
2950 * gratuitous ARP the moment the init routine marks the interface
2951 * as running. However, even though the MAC may have been initialized,
2952 * there may be a delay of a few seconds before the PHY completes
2953 * autonegotiation and the link is brought up. Any transmissions
2954 * made during that delay will be lost. Dealing with this is tricky:
2955 * we can't just pause in the init routine while waiting for the
2956 * PHY to come ready since that would bring the whole system to
2957 * a screeching halt for several seconds.
2959 * What we do here is prevent the TX start routine from sending
2960 * any packets until a link has been established. After the
2961 * interface has been initialized, the tick routine will poll
2962 * the state of the PHY until the IFM_ACTIVE flag is set. Until
2963 * that time, packets will stay in the send queue, and once the
2964 * link comes up, they will be flushed out to the wire.
2966 if (!sc->dc_link && mii->mii_media_status & IFM_ACTIVE &&
2967 IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) {
2969 if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
2973 if (sc->dc_flags & DC_21143_NWAY && !sc->dc_link)
2974 callout_reset(&sc->dc_stat_ch, hz/10, dc_tick, sc);
2976 callout_reset(&sc->dc_stat_ch, hz, dc_tick, sc);
2982 * A transmit underrun has occurred. Back off the transmit threshold,
2983 * or switch to store and forward mode if we have to.
2986 dc_tx_underrun(struct dc_softc *sc)
2991 if (DC_IS_DAVICOM(sc))
2994 if (DC_IS_INTEL(sc)) {
2996 * The real 21143 requires that the transmitter be idle
2997 * in order to change the transmit threshold or store
2998 * and forward state.
3000 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_TX_ON);
3002 for (i = 0; i < DC_TIMEOUT; i++) {
3003 isr = CSR_READ_4(sc, DC_ISR);
3004 if (isr & DC_ISR_TX_IDLE)
3008 if (i == DC_TIMEOUT) {
3009 printf("dc%d: failed to force tx to idle state\n",
3015 printf("dc%d: TX underrun -- ", sc->dc_unit);
3016 sc->dc_txthresh += DC_TXTHRESH_INC;
3017 if (sc->dc_txthresh > DC_TXTHRESH_MAX) {
3018 printf("using store and forward mode\n");
3019 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_STORENFWD);
3021 printf("increasing TX threshold\n");
3022 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_TX_THRESH);
3023 DC_SETBIT(sc, DC_NETCFG, sc->dc_txthresh);
3026 if (DC_IS_INTEL(sc))
3027 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_TX_ON);
3030 #ifdef DEVICE_POLLING
3031 static poll_handler_t dc_poll;
3034 dc_poll(struct ifnet *ifp, enum poll_cmd cmd, int count)
3036 struct dc_softc *sc = ifp->if_softc;
3038 if (!(ifp->if_capenable & IFCAP_POLLING)) {
3039 ether_poll_deregister(ifp);
3040 cmd = POLL_DEREGISTER;
3042 if (cmd == POLL_DEREGISTER) { /* final call, enable interrupts */
3043 /* Re-enable interrupts. */
3044 CSR_WRITE_4(sc, DC_IMR, DC_INTRS);
3048 sc->rxcycles = count;
3051 if (!IFQ_IS_EMPTY(&ifp->if_snd) && !(ifp->if_flags & IFF_OACTIVE))
3054 if (cmd == POLL_AND_CHECK_STATUS) { /* also check status register */
3057 status = CSR_READ_4(sc, DC_ISR);
3058 status &= (DC_ISR_RX_WATDOGTIMEO | DC_ISR_RX_NOBUF |
3059 DC_ISR_TX_NOBUF | DC_ISR_TX_IDLE | DC_ISR_TX_UNDERRUN |
3065 /* ack what we have */
3066 CSR_WRITE_4(sc, DC_ISR, status);
3068 if (status & (DC_ISR_RX_WATDOGTIMEO | DC_ISR_RX_NOBUF)) {
3069 u_int32_t r = CSR_READ_4(sc, DC_FRAMESDISCARDED);
3070 ifp->if_ierrors += (r & 0xffff) + ((r >> 17) & 0x7ff);
3072 if (dc_rx_resync(sc))
3075 /* restart transmit unit if necessary */
3076 if (status & DC_ISR_TX_IDLE && sc->dc_cdata.dc_tx_cnt)
3077 CSR_WRITE_4(sc, DC_TXSTART, 0xFFFFFFFF);
3079 if (status & DC_ISR_TX_UNDERRUN)
3082 if (status & DC_ISR_BUS_ERR) {
3083 printf("dc_poll: dc%d bus error\n", sc->dc_unit);
3090 #endif /* DEVICE_POLLING */
3095 struct dc_softc *sc;
3104 if ((CSR_READ_4(sc, DC_ISR) & DC_INTRS) == 0)
3108 ifp = &sc->arpcom.ac_if;
3109 #ifdef DEVICE_POLLING
3110 if (ifp->if_flags & IFF_POLLING)
3112 if ((ifp->if_capenable & IFCAP_POLLING) &&
3113 ether_poll_register(dc_poll, ifp)) { /* ok, disable interrupts */
3114 CSR_WRITE_4(sc, DC_IMR, 0x00000000);
3119 /* Suppress unwanted interrupts */
3120 if (!(ifp->if_flags & IFF_UP)) {
3121 if (CSR_READ_4(sc, DC_ISR) & DC_INTRS)
3127 /* Disable interrupts. */
3128 CSR_WRITE_4(sc, DC_IMR, 0x00000000);
3130 while (((status = CSR_READ_4(sc, DC_ISR)) & DC_INTRS)
3131 && status != 0xFFFFFFFF) {
3133 CSR_WRITE_4(sc, DC_ISR, status);
3135 if (status & DC_ISR_RX_OK) {
3137 curpkts = ifp->if_ipackets;
3139 if (curpkts == ifp->if_ipackets) {
3140 while (dc_rx_resync(sc))
3145 if (status & (DC_ISR_TX_OK | DC_ISR_TX_NOBUF))
3148 if (status & DC_ISR_TX_IDLE) {
3150 if (sc->dc_cdata.dc_tx_cnt) {
3151 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_TX_ON);
3152 CSR_WRITE_4(sc, DC_TXSTART, 0xFFFFFFFF);
3156 if (status & DC_ISR_TX_UNDERRUN)
3159 if ((status & DC_ISR_RX_WATDOGTIMEO)
3160 || (status & DC_ISR_RX_NOBUF)) {
3162 curpkts = ifp->if_ipackets;
3164 if (curpkts == ifp->if_ipackets) {
3165 while (dc_rx_resync(sc))
3170 if (status & DC_ISR_BUS_ERR) {
3176 /* Re-enable interrupts. */
3177 CSR_WRITE_4(sc, DC_IMR, DC_INTRS);
3179 if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
3182 #ifdef DEVICE_POLLING
3190 dc_dma_map_txbuf(arg, segs, nseg, mapsize, error)
3192 bus_dma_segment_t *segs;
3197 struct dc_softc *sc;
3199 int cur, first, frag, i;
3203 sc->dc_cdata.dc_tx_err = error;
3207 first = cur = frag = sc->dc_cdata.dc_tx_prod;
3208 for (i = 0; i < nseg; i++) {
3209 if ((sc->dc_flags & DC_TX_ADMTEK_WAR) &&
3210 (frag == (DC_TX_LIST_CNT - 1)) &&
3211 (first != sc->dc_cdata.dc_tx_first)) {
3212 bus_dmamap_unload(sc->dc_mtag,
3213 sc->dc_cdata.dc_tx_map[first]);
3214 sc->dc_cdata.dc_tx_err = ENOBUFS;
3218 f = &sc->dc_ldata->dc_tx_list[frag];
3219 f->dc_ctl = htole32(DC_TXCTL_TLINK | segs[i].ds_len);
3222 f->dc_ctl |= htole32(DC_TXCTL_FIRSTFRAG);
3224 f->dc_status = htole32(DC_TXSTAT_OWN);
3225 f->dc_data = htole32(segs[i].ds_addr);
3227 DC_INC(frag, DC_TX_LIST_CNT);
3230 sc->dc_cdata.dc_tx_err = 0;
3231 sc->dc_cdata.dc_tx_prod = frag;
3232 sc->dc_cdata.dc_tx_cnt += nseg;
3233 sc->dc_ldata->dc_tx_list[cur].dc_ctl |= htole32(DC_TXCTL_LASTFRAG);
3234 sc->dc_cdata.dc_tx_chain[cur] = sc->dc_cdata.dc_tx_mapping;
3235 if (sc->dc_flags & DC_TX_INTR_FIRSTFRAG)
3236 sc->dc_ldata->dc_tx_list[first].dc_ctl |=
3237 htole32(DC_TXCTL_FINT);
3238 if (sc->dc_flags & DC_TX_INTR_ALWAYS)
3239 sc->dc_ldata->dc_tx_list[cur].dc_ctl |= htole32(DC_TXCTL_FINT);
3240 if (sc->dc_flags & DC_TX_USE_TX_INTR && sc->dc_cdata.dc_tx_cnt > 64)
3241 sc->dc_ldata->dc_tx_list[cur].dc_ctl |= htole32(DC_TXCTL_FINT);
3242 sc->dc_ldata->dc_tx_list[first].dc_status = htole32(DC_TXSTAT_OWN);
3246 * Encapsulate an mbuf chain in a descriptor by coupling the mbuf data
3247 * pointers to the fragment pointers.
3250 dc_encap(struct dc_softc *sc, struct mbuf **m_head)
3253 int error, idx, chainlen = 0;
3256 * If there's no way we can send any packets, return now.
3258 if (DC_TX_LIST_CNT - sc->dc_cdata.dc_tx_cnt < 6)
3262 * Count the number of frags in this chain to see if
3263 * we need to m_defrag. Since the descriptor list is shared
3264 * by all packets, we'll m_defrag long chains so that they
3265 * do not use up the entire list, even if they would fit.
3267 for (m = *m_head; m != NULL; m = m->m_next)
3270 if ((chainlen > DC_TX_LIST_CNT / 4) ||
3271 ((DC_TX_LIST_CNT - (chainlen + sc->dc_cdata.dc_tx_cnt)) < 6)) {
3272 m = m_defrag(*m_head, M_DONTWAIT);
3279 * Start packing the mbufs in this chain into
3280 * the fragment pointers. Stop when we run out
3281 * of fragments or hit the end of the mbuf chain.
3283 idx = sc->dc_cdata.dc_tx_prod;
3284 sc->dc_cdata.dc_tx_mapping = *m_head;
3285 error = bus_dmamap_load_mbuf(sc->dc_mtag, sc->dc_cdata.dc_tx_map[idx],
3286 *m_head, dc_dma_map_txbuf, sc, 0);
3289 if (sc->dc_cdata.dc_tx_err != 0)
3290 return (sc->dc_cdata.dc_tx_err);
3291 bus_dmamap_sync(sc->dc_mtag, sc->dc_cdata.dc_tx_map[idx],
3292 BUS_DMASYNC_PREWRITE);
3293 bus_dmamap_sync(sc->dc_ltag, sc->dc_lmap,
3294 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
3299 * Main transmit routine. To avoid having to do mbuf copies, we put pointers
3300 * to the mbuf data regions directly in the transmit lists. We also save a
3301 * copy of the pointers since the transmit list fragment pointers are
3302 * physical addresses.
3306 dc_start(struct ifnet *ifp)
3308 struct dc_softc *sc;
3309 struct mbuf *m_head = NULL, *m;
3310 unsigned int queued = 0;
3317 if (!sc->dc_link && ifp->if_snd.ifq_len < 10) {
3322 if (ifp->if_flags & IFF_OACTIVE) {
3327 idx = sc->dc_cdata.dc_tx_first = sc->dc_cdata.dc_tx_prod;
3329 while (sc->dc_cdata.dc_tx_chain[idx] == NULL) {
3330 IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head);
3334 if (sc->dc_flags & DC_TX_COALESCE &&
3335 (m_head->m_next != NULL ||
3336 sc->dc_flags & DC_TX_ALIGN)) {
3337 m = m_defrag(m_head, M_DONTWAIT);
3339 IFQ_DRV_PREPEND(&ifp->if_snd, m_head);
3340 ifp->if_flags |= IFF_OACTIVE;
3347 if (dc_encap(sc, &m_head)) {
3348 IFQ_DRV_PREPEND(&ifp->if_snd, m_head);
3349 ifp->if_flags |= IFF_OACTIVE;
3352 idx = sc->dc_cdata.dc_tx_prod;
3356 * If there's a BPF listener, bounce a copy of this frame
3359 BPF_MTAP(ifp, m_head);
3361 if (sc->dc_flags & DC_TX_ONE) {
3362 ifp->if_flags |= IFF_OACTIVE;
3369 if (!(sc->dc_flags & DC_TX_POLL))
3370 CSR_WRITE_4(sc, DC_TXSTART, 0xFFFFFFFF);
3373 * Set a timeout in case the chip goes out to lunch.
3384 struct dc_softc *sc = xsc;
3385 struct ifnet *ifp = &sc->arpcom.ac_if;
3386 struct mii_data *mii;
3390 mii = device_get_softc(sc->dc_miibus);
3393 * Cancel pending I/O and free all RX/TX buffers.
3399 * Set cache alignment and burst length.
3401 if (DC_IS_ASIX(sc) || DC_IS_DAVICOM(sc))
3402 CSR_WRITE_4(sc, DC_BUSCTL, 0);
3404 CSR_WRITE_4(sc, DC_BUSCTL, DC_BUSCTL_MRME | DC_BUSCTL_MRLE);
3406 * Evenly share the bus between receive and transmit process.
3408 if (DC_IS_INTEL(sc))
3409 DC_SETBIT(sc, DC_BUSCTL, DC_BUSCTL_ARBITRATION);
3410 if (DC_IS_DAVICOM(sc) || DC_IS_INTEL(sc)) {
3411 DC_SETBIT(sc, DC_BUSCTL, DC_BURSTLEN_USECA);
3413 DC_SETBIT(sc, DC_BUSCTL, DC_BURSTLEN_16LONG);
3415 if (sc->dc_flags & DC_TX_POLL)
3416 DC_SETBIT(sc, DC_BUSCTL, DC_TXPOLL_1);
3417 switch(sc->dc_cachesize) {
3419 DC_SETBIT(sc, DC_BUSCTL, DC_CACHEALIGN_32LONG);
3422 DC_SETBIT(sc, DC_BUSCTL, DC_CACHEALIGN_16LONG);
3425 DC_SETBIT(sc, DC_BUSCTL, DC_CACHEALIGN_8LONG);
3429 DC_SETBIT(sc, DC_BUSCTL, DC_CACHEALIGN_NONE);
3433 if (sc->dc_flags & DC_TX_STORENFWD)
3434 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_STORENFWD);
3436 if (sc->dc_txthresh > DC_TXTHRESH_MAX) {
3437 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_STORENFWD);
3439 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_STORENFWD);
3440 DC_SETBIT(sc, DC_NETCFG, sc->dc_txthresh);
3444 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_NO_RXCRC);
3445 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_TX_BACKOFF);
3447 if (DC_IS_MACRONIX(sc) || DC_IS_PNICII(sc)) {
3449 * The app notes for the 98713 and 98715A say that
3450 * in order to have the chips operate properly, a magic
3451 * number must be written to CSR16. Macronix does not
3452 * document the meaning of these bits so there's no way
3453 * to know exactly what they do. The 98713 has a magic
3454 * number all its own; the rest all use a different one.
3456 DC_CLRBIT(sc, DC_MX_MAGICPACKET, 0xFFFF0000);
3457 if (sc->dc_type == DC_TYPE_98713)
3458 DC_SETBIT(sc, DC_MX_MAGICPACKET, DC_MX_MAGIC_98713);
3460 DC_SETBIT(sc, DC_MX_MAGICPACKET, DC_MX_MAGIC_98715);
3463 if (DC_IS_XIRCOM(sc)) {
3465 * setup General Purpose Port mode and data so the tulip
3466 * can talk to the MII.
3468 CSR_WRITE_4(sc, DC_SIAGP, DC_SIAGP_WRITE_EN | DC_SIAGP_INT1_EN |
3469 DC_SIAGP_MD_GP2_OUTPUT | DC_SIAGP_MD_GP0_OUTPUT);
3471 CSR_WRITE_4(sc, DC_SIAGP, DC_SIAGP_INT1_EN |
3472 DC_SIAGP_MD_GP2_OUTPUT | DC_SIAGP_MD_GP0_OUTPUT);
3476 DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_TX_THRESH);
3477 DC_SETBIT(sc, DC_NETCFG, DC_TXTHRESH_MIN);
3479 /* Init circular RX list. */
3480 if (dc_list_rx_init(sc) == ENOBUFS) {
3481 printf("dc%d: initialization failed: no "
3482 "memory for rx buffers\n", sc->dc_unit);
3489 * Init TX descriptors.
3491 dc_list_tx_init(sc);
3494 * Load the address of the RX list.
3496 CSR_WRITE_4(sc, DC_RXADDR, DC_RXDESC(sc, 0));
3497 CSR_WRITE_4(sc, DC_TXADDR, DC_TXDESC(sc, 0));
3500 * Enable interrupts.
3502 #ifdef DEVICE_POLLING
3504 * ... but only if we are not polling, and make sure they are off in
3505 * the case of polling. Some cards (e.g. fxp) turn interrupts on
3508 if (ifp->if_flags & IFF_POLLING)
3509 CSR_WRITE_4(sc, DC_IMR, 0x00000000);
3512 CSR_WRITE_4(sc, DC_IMR, DC_INTRS);
3513 CSR_WRITE_4(sc, DC_ISR, 0xFFFFFFFF);
3515 /* Enable transmitter. */
3516 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_TX_ON);
3519 * If this is an Intel 21143 and we're not using the
3520 * MII port, program the LED control pins so we get
3521 * link and activity indications.
3523 if (sc->dc_flags & DC_TULIP_LEDS) {
3524 CSR_WRITE_4(sc, DC_WATCHDOG,
3525 DC_WDOG_CTLWREN | DC_WDOG_LINK | DC_WDOG_ACTIVITY);
3526 CSR_WRITE_4(sc, DC_WATCHDOG, 0);
3530 * Load the RX/multicast filter. We do this sort of late
3531 * because the filter programming scheme on the 21143 and
3532 * some clones requires DMAing a setup frame via the TX
3533 * engine, and we need the transmitter enabled for that.
3537 /* Enable receiver. */
3538 DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_ON);
3539 CSR_WRITE_4(sc, DC_RXSTART, 0xFFFFFFFF);
3542 dc_setcfg(sc, sc->dc_if_media);
3544 ifp->if_flags |= IFF_RUNNING;
3545 ifp->if_flags &= ~IFF_OACTIVE;
3547 /* Don't start the ticker if this is a homePNA link. */
3548 if (IFM_SUBTYPE(mii->mii_media.ifm_media) == IFM_HPNA_1)
3551 if (sc->dc_flags & DC_21143_NWAY)
3552 callout_reset(&sc->dc_stat_ch, hz/10, dc_tick, sc);
3554 callout_reset(&sc->dc_stat_ch, hz, dc_tick, sc);
3558 if(sc->dc_srm_media) {
3561 ifr.ifr_media = sc->dc_srm_media;
3562 ifmedia_ioctl(ifp, &ifr, &mii->mii_media, SIOCSIFMEDIA);
3563 sc->dc_srm_media = 0;
3570 * Set media options.
3573 dc_ifmedia_upd(struct ifnet *ifp)
3575 struct dc_softc *sc;
3576 struct mii_data *mii;
3577 struct ifmedia *ifm;
3580 mii = device_get_softc(sc->dc_miibus);
3582 ifm = &mii->mii_media;
3584 if (DC_IS_DAVICOM(sc) &&
3585 IFM_SUBTYPE(ifm->ifm_media) == IFM_HPNA_1)
3586 dc_setcfg(sc, ifm->ifm_media);
3594 * Report current media status.
3597 dc_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
3599 struct dc_softc *sc;
3600 struct mii_data *mii;
3601 struct ifmedia *ifm;
3604 mii = device_get_softc(sc->dc_miibus);
3606 ifm = &mii->mii_media;
3607 if (DC_IS_DAVICOM(sc)) {
3608 if (IFM_SUBTYPE(ifm->ifm_media) == IFM_HPNA_1) {
3609 ifmr->ifm_active = ifm->ifm_media;
3610 ifmr->ifm_status = 0;
3614 ifmr->ifm_active = mii->mii_media_active;
3615 ifmr->ifm_status = mii->mii_media_status;
3619 dc_ioctl(struct ifnet *ifp, u_long command, caddr_t data)
3621 struct dc_softc *sc = ifp->if_softc;
3622 struct ifreq *ifr = (struct ifreq *)data;
3623 struct mii_data *mii;
3630 if (ifp->if_flags & IFF_UP) {
3631 int need_setfilt = (ifp->if_flags ^ sc->dc_if_flags) &
3632 (IFF_PROMISC | IFF_ALLMULTI);
3634 if (ifp->if_flags & IFF_RUNNING) {
3638 sc->dc_txthresh = 0;
3642 if (ifp->if_flags & IFF_RUNNING)
3645 sc->dc_if_flags = ifp->if_flags;
3655 mii = device_get_softc(sc->dc_miibus);
3656 error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command);
3658 if (sc->dc_srm_media)
3659 sc->dc_srm_media = 0;
3663 ifp->if_capenable &= ~IFCAP_POLLING;
3664 ifp->if_capenable |= ifr->ifr_reqcap & IFCAP_POLLING;
3667 error = ether_ioctl(ifp, command, data);
3677 dc_watchdog(struct ifnet *ifp)
3679 struct dc_softc *sc;
3686 printf("dc%d: watchdog timeout\n", sc->dc_unit);
3692 if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
3699 * Stop the adapter and free any mbufs allocated to the
3703 dc_stop(struct dc_softc *sc)
3706 struct dc_list_data *ld;
3707 struct dc_chain_data *cd;
3713 ifp = &sc->arpcom.ac_if;
3718 callout_stop(&sc->dc_stat_ch);
3720 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
3721 #ifdef DEVICE_POLLING
3722 ether_poll_deregister(ifp);
3725 DC_CLRBIT(sc, DC_NETCFG, (DC_NETCFG_RX_ON | DC_NETCFG_TX_ON));
3726 CSR_WRITE_4(sc, DC_IMR, 0x00000000);
3727 CSR_WRITE_4(sc, DC_TXADDR, 0x00000000);
3728 CSR_WRITE_4(sc, DC_RXADDR, 0x00000000);
3732 * Free data in the RX lists.
3734 for (i = 0; i < DC_RX_LIST_CNT; i++) {
3735 if (cd->dc_rx_chain[i] != NULL) {
3736 m_freem(cd->dc_rx_chain[i]);
3737 cd->dc_rx_chain[i] = NULL;
3740 bzero(&ld->dc_rx_list, sizeof(ld->dc_rx_list));
3743 * Free the TX list buffers.
3745 for (i = 0; i < DC_TX_LIST_CNT; i++) {
3746 if (cd->dc_tx_chain[i] != NULL) {
3747 ctl = le32toh(ld->dc_tx_list[i].dc_ctl);
3748 if ((ctl & DC_TXCTL_SETUP) ||
3749 !(ctl & DC_TXCTL_LASTFRAG)) {
3750 cd->dc_tx_chain[i] = NULL;
3753 bus_dmamap_unload(sc->dc_mtag, cd->dc_tx_map[i]);
3754 m_freem(cd->dc_tx_chain[i]);
3755 cd->dc_tx_chain[i] = NULL;
3758 bzero(&ld->dc_tx_list, sizeof(ld->dc_tx_list));
3764 * Device suspend routine. Stop the interface and save some PCI
3765 * settings in case the BIOS doesn't restore them properly on
3769 dc_suspend(device_t dev)
3771 struct dc_softc *sc;
3776 sc = device_get_softc(dev);
3785 * Device resume routine. Restore some PCI settings in case the BIOS
3786 * doesn't, re-enable busmastering, and restart the interface if
3790 dc_resume(device_t dev)
3792 struct dc_softc *sc;
3798 sc = device_get_softc(dev);
3799 ifp = &sc->arpcom.ac_if;
3801 /* reinitialize interface if necessary */
3802 if (ifp->if_flags & IFF_UP)
3812 * Stop all chip I/O so that the kernel's probe routines don't
3813 * get confused by errant DMAs when rebooting.
3816 dc_shutdown(device_t dev)
3818 struct dc_softc *sc;
3820 sc = device_get_softc(dev);