2 * Copyright (c) 1997, 1998, 1999
3 * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. All advertising materials mentioning features or use of this software
14 * must display the following acknowledgement:
15 * This product includes software developed by Bill Paul.
16 * 4. Neither the name of the author nor the names of any co-contributors
17 * may be used to endorse or promote products derived from this software
18 * without specific prior written permission.
20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
30 * THE POSSIBILITY OF SUCH DAMAGE.
36 * 21143 and clone common register definitions.
39 #define DC_BUSCTL 0x00 /* bus control */
40 #define DC_TXSTART 0x08 /* tx start demand */
41 #define DC_RXSTART 0x10 /* rx start demand */
42 #define DC_RXADDR 0x18 /* rx descriptor list start addr */
43 #define DC_TXADDR 0x20 /* tx descriptor list start addr */
44 #define DC_ISR 0x28 /* interrupt status register */
45 #define DC_NETCFG 0x30 /* network config register */
46 #define DC_IMR 0x38 /* interrupt mask */
47 #define DC_FRAMESDISCARDED 0x40 /* # of discarded frames */
48 #define DC_SIO 0x48 /* MII and ROM/EEPROM access */
49 #define DC_ROM 0x50 /* ROM programming address */
50 #define DC_TIMER 0x58 /* general timer */
51 #define DC_10BTSTAT 0x60 /* SIA status */
52 #define DC_SIARESET 0x68 /* SIA connectivity */
53 #define DC_10BTCTRL 0x70 /* SIA transmit and receive */
54 #define DC_WATCHDOG 0x78 /* SIA and general purpose port */
55 #define DC_SIAGP 0x78 /* SIA and general purpose port (X3201) */
58 * There are two general 'types' of MX chips that we need to be
59 * concerned with. One is the original 98713, which has its internal
60 * NWAY support controlled via the MDIO bits in the serial I/O
61 * register. The other is everything else (from the 98713A on up),
62 * which has its internal NWAY controlled via CSR13, CSR14 and CSR15,
63 * just like the 21143. This type setting also governs which of the
64 * 'magic' numbers we write to CSR16. The PNIC II falls into the
65 * 98713A/98715/98715A/98725 category.
67 #define DC_TYPE_98713 0x1
68 #define DC_TYPE_98713A 0x2
69 #define DC_TYPE_987x5 0x3
71 /* Other type of supported chips. */
72 #define DC_TYPE_21143 0x4 /* Intel 21143 */
73 #define DC_TYPE_ASIX 0x5 /* ASIX AX88140A/AX88141 */
74 #define DC_TYPE_AL981 0x6 /* ADMtek AL981 Comet */
75 #define DC_TYPE_AN983 0x7 /* ADMtek AN983 Centaur */
76 #define DC_TYPE_DM9102 0x8 /* Davicom DM9102 */
77 #define DC_TYPE_PNICII 0x9 /* 82c115 PNIC II */
78 #define DC_TYPE_PNIC 0xA /* 82c168/82c169 PNIC I */
79 #define DC_TYPE_XIRCOM 0xB /* Xircom X3201 */
80 #define DC_TYPE_CONEXANT 0xC /* Conexant LANfinity RS7112 */
82 #define DC_IS_MACRONIX(x) \
83 (x->dc_type == DC_TYPE_98713 || \
84 x->dc_type == DC_TYPE_98713A || \
85 x->dc_type == DC_TYPE_987x5)
87 #define DC_IS_ADMTEK(x) \
88 (x->dc_type == DC_TYPE_AL981 || \
89 x->dc_type == DC_TYPE_AN983)
91 #define DC_IS_INTEL(x) (x->dc_type == DC_TYPE_21143)
92 #define DC_IS_ASIX(x) (x->dc_type == DC_TYPE_ASIX)
93 #define DC_IS_COMET(x) (x->dc_type == DC_TYPE_AL981)
94 #define DC_IS_CENTAUR(x) (x->dc_type == DC_TYPE_AN983)
95 #define DC_IS_DAVICOM(x) (x->dc_type == DC_TYPE_DM9102)
96 #define DC_IS_PNICII(x) (x->dc_type == DC_TYPE_PNICII)
97 #define DC_IS_PNIC(x) (x->dc_type == DC_TYPE_PNIC)
98 #define DC_IS_XIRCOM(x) (x->dc_type == DC_TYPE_XIRCOM)
99 #define DC_IS_CONEXANT(x) (x->dc_type == DC_TYPE_CONEXANT)
101 /* MII/symbol mode port types */
102 #define DC_PMODE_MII 0x1
103 #define DC_PMODE_SYM 0x2
104 #define DC_PMODE_SIA 0x3
109 #define DC_BUSCTL_RESET 0x00000001
110 #define DC_BUSCTL_ARBITRATION 0x00000002
111 #define DC_BUSCTL_SKIPLEN 0x0000007C
112 #define DC_BUSCTL_BUF_BIGENDIAN 0x00000080
113 #define DC_BUSCTL_BURSTLEN 0x00003F00
114 #define DC_BUSCTL_CACHEALIGN 0x0000C000
115 #define DC_BUSCTL_TXPOLL 0x000E0000
116 #define DC_BUSCTL_DBO 0x00100000
117 #define DC_BUSCTL_MRME 0x00200000
118 #define DC_BUSCTL_MRLE 0x00800000
119 #define DC_BUSCTL_MWIE 0x01000000
120 #define DC_BUSCTL_ONNOW_ENB 0x04000000
122 #define DC_SKIPLEN_1LONG 0x00000004
123 #define DC_SKIPLEN_2LONG 0x00000008
124 #define DC_SKIPLEN_3LONG 0x00000010
125 #define DC_SKIPLEN_4LONG 0x00000020
126 #define DC_SKIPLEN_5LONG 0x00000040
128 #define DC_CACHEALIGN_NONE 0x00000000
129 #define DC_CACHEALIGN_8LONG 0x00004000
130 #define DC_CACHEALIGN_16LONG 0x00008000
131 #define DC_CACHEALIGN_32LONG 0x0000C000
133 #define DC_BURSTLEN_USECA 0x00000000
134 #define DC_BURSTLEN_1LONG 0x00000100
135 #define DC_BURSTLEN_2LONG 0x00000200
136 #define DC_BURSTLEN_4LONG 0x00000400
137 #define DC_BURSTLEN_8LONG 0x00000800
138 #define DC_BURSTLEN_16LONG 0x00001000
139 #define DC_BURSTLEN_32LONG 0x00002000
141 #define DC_TXPOLL_OFF 0x00000000
142 #define DC_TXPOLL_1 0x00020000
143 #define DC_TXPOLL_2 0x00040000
144 #define DC_TXPOLL_3 0x00060000
145 #define DC_TXPOLL_4 0x00080000
146 #define DC_TXPOLL_5 0x000A0000
147 #define DC_TXPOLL_6 0x000C0000
148 #define DC_TXPOLL_7 0x000E0000
151 * Interrupt status bits.
153 #define DC_ISR_TX_OK 0x00000001
154 #define DC_ISR_TX_IDLE 0x00000002
155 #define DC_ISR_TX_NOBUF 0x00000004
156 #define DC_ISR_TX_JABBERTIMEO 0x00000008
157 #define DC_ISR_LINKGOOD 0x00000010
158 #define DC_ISR_TX_UNDERRUN 0x00000020
159 #define DC_ISR_RX_OK 0x00000040
160 #define DC_ISR_RX_NOBUF 0x00000080
161 #define DC_ISR_RX_READ 0x00000100
162 #define DC_ISR_RX_WATDOGTIMEO 0x00000200
163 #define DC_ISR_TX_EARLY 0x00000400
164 #define DC_ISR_TIMER_EXPIRED 0x00000800
165 #define DC_ISR_LINKFAIL 0x00001000
166 #define DC_ISR_BUS_ERR 0x00002000
167 #define DC_ISR_RX_EARLY 0x00004000
168 #define DC_ISR_ABNORMAL 0x00008000
169 #define DC_ISR_NORMAL 0x00010000
170 #define DC_ISR_RX_STATE 0x000E0000
171 #define DC_ISR_TX_STATE 0x00700000
172 #define DC_ISR_BUSERRTYPE 0x03800000
173 #define DC_ISR_100MBPSLINK 0x08000000
174 #define DC_ISR_MAGICKPACK 0x10000000
176 #define DC_RXSTATE_STOPPED 0x00000000 /* 000 - Stopped */
177 #define DC_RXSTATE_FETCH 0x00020000 /* 001 - Fetching descriptor */
178 #define DC_RXSTATE_ENDCHECK 0x00040000 /* 010 - check for rx end */
179 #define DC_RXSTATE_WAIT 0x00060000 /* 011 - waiting for packet */
180 #define DC_RXSTATE_SUSPEND 0x00080000 /* 100 - suspend rx */
181 #define DC_RXSTATE_CLOSE 0x000A0000 /* 101 - close tx desc */
182 #define DC_RXSTATE_FLUSH 0x000C0000 /* 110 - flush from FIFO */
183 #define DC_RXSTATE_DEQUEUE 0x000E0000 /* 111 - dequeue from FIFO */
185 #define DC_HAS_BROKEN_RXSTATE(x) \
186 (DC_IS_CENTAUR(x) || DC_IS_CONEXANT(x) || (DC_IS_DAVICOM(x) && \
187 pci_get_revid((x)->dc_dev) >= DC_REVISION_DM9102A))
189 #define DC_TXSTATE_RESET 0x00000000 /* 000 - reset */
190 #define DC_TXSTATE_FETCH 0x00100000 /* 001 - fetching descriptor */
191 #define DC_TXSTATE_WAITEND 0x00200000 /* 010 - wait for tx end */
192 #define DC_TXSTATE_READING 0x00300000 /* 011 - read and enqueue */
193 #define DC_TXSTATE_RSVD 0x00400000 /* 100 - reserved */
194 #define DC_TXSTATE_SETUP 0x00500000 /* 101 - setup packet */
195 #define DC_TXSTATE_SUSPEND 0x00600000 /* 110 - suspend tx */
196 #define DC_TXSTATE_CLOSE 0x00700000 /* 111 - close tx desc */
199 * Network config bits.
201 #define DC_NETCFG_RX_HASHPERF 0x00000001
202 #define DC_NETCFG_RX_ON 0x00000002
203 #define DC_NETCFG_RX_HASHONLY 0x00000004
204 #define DC_NETCFG_RX_BADFRAMES 0x00000008
205 #define DC_NETCFG_RX_INVFILT 0x00000010
206 #define DC_NETCFG_BACKOFFCNT 0x00000020
207 #define DC_NETCFG_RX_PROMISC 0x00000040
208 #define DC_NETCFG_RX_ALLMULTI 0x00000080
209 #define DC_NETCFG_FULLDUPLEX 0x00000200
210 #define DC_NETCFG_LOOPBACK 0x00000C00
211 #define DC_NETCFG_FORCECOLL 0x00001000
212 #define DC_NETCFG_TX_ON 0x00002000
213 #define DC_NETCFG_TX_THRESH 0x0000C000
214 #define DC_NETCFG_TX_BACKOFF 0x00020000
215 #define DC_NETCFG_PORTSEL 0x00040000 /* 0 == 10, 1 == 100 */
216 #define DC_NETCFG_HEARTBEAT 0x00080000
217 #define DC_NETCFG_STORENFWD 0x00200000
218 #define DC_NETCFG_SPEEDSEL 0x00400000 /* 1 == 10, 0 == 100 */
219 #define DC_NETCFG_PCS 0x00800000
220 #define DC_NETCFG_SCRAMBLER 0x01000000
221 #define DC_NETCFG_NO_RXCRC 0x02000000
222 #define DC_NETCFG_RX_ALL 0x40000000
223 #define DC_NETCFG_CAPEFFECT 0x80000000
225 #define DC_OPMODE_NORM 0x00000000
226 #define DC_OPMODE_INTLOOP 0x00000400
227 #define DC_OPMODE_EXTLOOP 0x00000800
230 #define DC_TXTHRESH_72BYTES 0x00000000
231 #define DC_TXTHRESH_96BYTES 0x00004000
232 #define DC_TXTHRESH_128BYTES 0x00008000
233 #define DC_TXTHRESH_160BYTES 0x0000C000
236 #define DC_TXTHRESH_MIN 0x00000000
237 #define DC_TXTHRESH_INC 0x00004000
238 #define DC_TXTHRESH_MAX 0x0000C000
242 * Interrupt mask bits.
244 #define DC_IMR_TX_OK 0x00000001
245 #define DC_IMR_TX_IDLE 0x00000002
246 #define DC_IMR_TX_NOBUF 0x00000004
247 #define DC_IMR_TX_JABBERTIMEO 0x00000008
248 #define DC_IMR_LINKGOOD 0x00000010
249 #define DC_IMR_TX_UNDERRUN 0x00000020
250 #define DC_IMR_RX_OK 0x00000040
251 #define DC_IMR_RX_NOBUF 0x00000080
252 #define DC_IMR_RX_READ 0x00000100
253 #define DC_IMR_RX_WATDOGTIMEO 0x00000200
254 #define DC_IMR_TX_EARLY 0x00000400
255 #define DC_IMR_TIMER_EXPIRED 0x00000800
256 #define DC_IMR_LINKFAIL 0x00001000
257 #define DC_IMR_BUS_ERR 0x00002000
258 #define DC_IMR_RX_EARLY 0x00004000
259 #define DC_IMR_ABNORMAL 0x00008000
260 #define DC_IMR_NORMAL 0x00010000
261 #define DC_IMR_100MBPSLINK 0x08000000
262 #define DC_IMR_MAGICKPACK 0x10000000
265 (DC_IMR_RX_OK|DC_IMR_TX_OK|DC_IMR_RX_NOBUF|DC_IMR_RX_WATDOGTIMEO|\
266 DC_IMR_TX_NOBUF|DC_IMR_TX_UNDERRUN|DC_IMR_BUS_ERR| \
267 DC_IMR_ABNORMAL|DC_IMR_NORMAL/*|DC_IMR_TX_EARLY*/)
269 * Serial I/O (EEPROM/ROM) bits.
271 #define DC_SIO_EE_CS 0x00000001 /* EEPROM chip select */
272 #define DC_SIO_EE_CLK 0x00000002 /* EEPROM clock */
273 #define DC_SIO_EE_DATAIN 0x00000004 /* EEPROM data output */
274 #define DC_SIO_EE_DATAOUT 0x00000008 /* EEPROM data input */
275 #define DC_SIO_ROMDATA4 0x00000010
276 #define DC_SIO_ROMDATA5 0x00000020
277 #define DC_SIO_ROMDATA6 0x00000040
278 #define DC_SIO_ROMDATA7 0x00000080
279 #define DC_SIO_EESEL 0x00000800
280 #define DC_SIO_ROMSEL 0x00001000
281 #define DC_SIO_ROMCTL_WRITE 0x00002000
282 #define DC_SIO_ROMCTL_READ 0x00004000
283 #define DC_SIO_MII_CLK 0x00010000 /* MDIO clock */
284 #define DC_SIO_MII_DATAOUT 0x00020000 /* MDIO data out */
285 #define DC_SIO_MII_DIR 0x00040000 /* MDIO dir */
286 #define DC_SIO_MII_DATAIN 0x00080000 /* MDIO data in */
288 #define DC_EECMD_WRITE 0x140
289 #define DC_EECMD_READ 0x180
290 #define DC_EECMD_ERASE 0x1c0
292 #define DC_EE_NODEADDR_OFFSET 0x70
293 #define DC_EE_NODEADDR 10
296 * General purpose timer register
298 #define DC_TIMER_VALUE 0x0000FFFF
299 #define DC_TIMER_CONTINUOUS 0x00010000
302 * 10baseT status register
304 #define DC_TSTAT_MIIACT 0x00000001 /* MII port activity */
305 #define DC_TSTAT_LS100 0x00000002 /* link status of 100baseTX */
306 #define DC_TSTAT_LS10 0x00000004 /* link status of 10baseT */
307 #define DC_TSTAT_AUTOPOLARITY 0x00000008
308 #define DC_TSTAT_AUIACT 0x00000100 /* AUI activity */
309 #define DC_TSTAT_10BTACT 0x00000200 /* 10baseT activity */
310 #define DC_TSTAT_NSN 0x00000400 /* non-stable FLPs detected */
311 #define DC_TSTAT_REMFAULT 0x00000800
312 #define DC_TSTAT_ANEGSTAT 0x00007000
313 #define DC_TSTAT_LP_CAN_NWAY 0x00008000 /* link partner supports NWAY */
314 #define DC_TSTAT_LPCODEWORD 0xFFFF0000 /* link partner's code word */
316 #define DC_ASTAT_DISABLE 0x00000000
317 #define DC_ASTAT_TXDISABLE 0x00001000
318 #define DC_ASTAT_ABDETECT 0x00002000
319 #define DC_ASTAT_ACKDETECT 0x00003000
320 #define DC_ASTAT_CMPACKDETECT 0x00004000
321 #define DC_ASTAT_AUTONEGCMP 0x00005000
322 #define DC_ASTAT_LINKCHECK 0x00006000
327 #define DC_SIA_RESET 0x00000001
328 #define DC_SIA_AUI 0x00000008 /* AUI or 10baseT */
331 * 10baseT control register
333 #define DC_TCTL_ENCODER_ENB 0x00000001
334 #define DC_TCTL_LOOPBACK 0x00000002
335 #define DC_TCTL_DRIVER_ENB 0x00000004
336 #define DC_TCTL_LNKPULSE_ENB 0x00000008
337 #define DC_TCTL_HALFDUPLEX 0x00000040
338 #define DC_TCTL_AUTONEGENBL 0x00000080
339 #define DC_TCTL_RX_SQUELCH 0x00000100
340 #define DC_TCTL_COLL_SQUELCH 0x00000200
341 #define DC_TCTL_COLL_DETECT 0x00000400
342 #define DC_TCTL_SQE_ENB 0x00000800
343 #define DC_TCTL_LINKTEST 0x00001000
344 #define DC_TCTL_AUTOPOLARITY 0x00002000
345 #define DC_TCTL_SET_POL_PLUS 0x00004000
346 #define DC_TCTL_AUTOSENSE 0x00008000 /* 10bt/AUI autosense */
347 #define DC_TCTL_100BTXHALF 0x00010000
348 #define DC_TCTL_100BTXFULL 0x00020000
349 #define DC_TCTL_100BT4 0x00040000
352 * Watchdog timer register
354 #define DC_WDOG_JABBERDIS 0x00000001
355 #define DC_WDOG_HOSTUNJAB 0x00000002
356 #define DC_WDOG_JABBERCLK 0x00000004
357 #define DC_WDOG_RXWDOGDIS 0x00000010
358 #define DC_WDOG_RXWDOGCLK 0x00000020
359 #define DC_WDOG_MUSTBEZERO 0x00000100
360 #define DC_WDOG_AUIBNC 0x00100000
361 #define DC_WDOG_ACTIVITY 0x00200000
362 #define DC_WDOG_RX_MATCH 0x00400000
363 #define DC_WDOG_LINK 0x00800000
364 #define DC_WDOG_CTLWREN 0x08000000
367 * SIA and General Purpose Port register (X3201)
369 #define DC_SIAGP_RXMATCH 0x40000000
370 #define DC_SIAGP_INT1 0x20000000
371 #define DC_SIAGP_INT0 0x10000000
372 #define DC_SIAGP_WRITE_EN 0x08000000
373 #define DC_SIAGP_RXMATCH_EN 0x04000000
374 #define DC_SIAGP_INT1_EN 0x02000000
375 #define DC_SIAGP_INT0_EN 0x01000000
376 #define DC_SIAGP_LED3 0x00800000
377 #define DC_SIAGP_LED2 0x00400000
378 #define DC_SIAGP_LED1 0x00200000
379 #define DC_SIAGP_LED0 0x00100000
380 #define DC_SIAGP_MD_GP3_OUTPUT 0x00080000
381 #define DC_SIAGP_MD_GP2_OUTPUT 0x00040000
382 #define DC_SIAGP_MD_GP1_OUTPUT 0x00020000
383 #define DC_SIAGP_MD_GP0_OUTPUT 0x00010000
386 * Size of a setup frame.
388 #define DC_SFRAME_LEN 192
391 * 21x4x TX/RX list structure.
401 #define dc_data dc_ptr1
402 #define dc_next dc_ptr2
404 #define DC_RXSTAT_FIFOOFLOW 0x00000001
405 #define DC_RXSTAT_CRCERR 0x00000002
406 #define DC_RXSTAT_DRIBBLE 0x00000004
407 #define DC_RXSTAT_MIIERE 0x00000008
408 #define DC_RXSTAT_WATCHDOG 0x00000010
409 #define DC_RXSTAT_FRAMETYPE 0x00000020 /* 0 == IEEE 802.3 */
410 #define DC_RXSTAT_COLLSEEN 0x00000040
411 #define DC_RXSTAT_GIANT 0x00000080
412 #define DC_RXSTAT_LASTFRAG 0x00000100
413 #define DC_RXSTAT_FIRSTFRAG 0x00000200
414 #define DC_RXSTAT_MULTICAST 0x00000400
415 #define DC_RXSTAT_RUNT 0x00000800
416 #define DC_RXSTAT_RXTYPE 0x00003000
417 #define DC_RXSTAT_DE 0x00004000
418 #define DC_RXSTAT_RXERR 0x00008000
419 #define DC_RXSTAT_RXLEN 0x3FFF0000
420 #define DC_RXSTAT_OWN 0x80000000
422 #define DC_RXBYTES(x) ((x & DC_RXSTAT_RXLEN) >> 16)
423 #define DC_RXSTAT (DC_RXSTAT_FIRSTFRAG|DC_RXSTAT_LASTFRAG|DC_RXSTAT_OWN)
425 #define DC_RXCTL_BUFLEN1 0x00000FFF
426 #define DC_RXCTL_BUFLEN2 0x00FFF000
427 #define DC_RXCTL_RLINK 0x01000000
428 #define DC_RXCTL_RLAST 0x02000000
430 #define DC_TXSTAT_DEFER 0x00000001
431 #define DC_TXSTAT_UNDERRUN 0x00000002
432 #define DC_TXSTAT_LINKFAIL 0x00000003
433 #define DC_TXSTAT_COLLCNT 0x00000078
434 #define DC_TXSTAT_SQE 0x00000080
435 #define DC_TXSTAT_EXCESSCOLL 0x00000100
436 #define DC_TXSTAT_LATECOLL 0x00000200
437 #define DC_TXSTAT_NOCARRIER 0x00000400
438 #define DC_TXSTAT_CARRLOST 0x00000800
439 #define DC_TXSTAT_JABTIMEO 0x00004000
440 #define DC_TXSTAT_ERRSUM 0x00008000
441 #define DC_TXSTAT_OWN 0x80000000
443 #define DC_TXCTL_BUFLEN1 0x000007FF
444 #define DC_TXCTL_BUFLEN2 0x003FF800
445 #define DC_TXCTL_FILTTYPE0 0x00400000
446 #define DC_TXCTL_PAD 0x00800000
447 #define DC_TXCTL_TLINK 0x01000000
448 #define DC_TXCTL_TLAST 0x02000000
449 #define DC_TXCTL_NOCRC 0x04000000
450 #define DC_TXCTL_SETUP 0x08000000
451 #define DC_TXCTL_FILTTYPE1 0x10000000
452 #define DC_TXCTL_FIRSTFRAG 0x20000000
453 #define DC_TXCTL_LASTFRAG 0x40000000
454 #define DC_TXCTL_FINT 0x80000000
456 #define DC_FILTER_PERFECT 0x00000000
457 #define DC_FILTER_HASHPERF 0x00400000
458 #define DC_FILTER_INVERSE 0x10000000
459 #define DC_FILTER_HASHONLY 0x10400000
461 #define DC_MAXFRAGS 16
462 #ifdef DEVICE_POLLING
463 #define DC_RX_LIST_CNT 192
465 #define DC_RX_LIST_CNT 64
467 #define DC_TX_LIST_CNT 256
468 #define DC_TX_LIST_RSVD 5
469 #define DC_MIN_FRAMELEN 60
470 #define DC_RXLEN 1536
472 #define DC_INC(x, y) (x) = (x + 1) % y
474 /* Macros to easily get the DMA address of a descriptor. */
475 #define DC_RXDESC(sc, i) (sc->dc_laddr + \
476 (uintptr_t)(sc->dc_ldata->dc_rx_list + i) - (uintptr_t)sc->dc_ldata)
477 #define DC_TXDESC(sc, i) (sc->dc_laddr + \
478 (uintptr_t)(sc->dc_ldata->dc_tx_list + i) - (uintptr_t)sc->dc_ldata)
480 #if BYTE_ORDER == BIG_ENDIAN
481 #define DC_SP_MAC(x) ((x) << 16)
483 #define DC_SP_MAC(x) (x)
486 struct dc_list_data {
487 struct dc_desc dc_rx_list[DC_RX_LIST_CNT];
488 struct dc_desc dc_tx_list[DC_TX_LIST_CNT];
491 struct dc_chain_data {
492 struct mbuf *dc_rx_chain[DC_RX_LIST_CNT];
493 struct mbuf *dc_tx_chain[DC_TX_LIST_CNT];
494 bus_dmamap_t dc_rx_map[DC_RX_LIST_CNT];
495 bus_dmamap_t dc_tx_map[DC_TX_LIST_CNT];
497 u_int8_t dc_pad[DC_MIN_FRAMELEN];
505 struct dc_mediainfo {
509 u_int8_t *dc_reset_ptr;
510 u_int8_t dc_reset_len;
511 struct dc_mediainfo *dc_next;
521 struct dc_mii_frame {
522 u_int8_t mii_stdelim;
524 u_int8_t mii_phyaddr;
525 u_int8_t mii_regaddr;
526 u_int8_t mii_turnaround;
533 #define DC_MII_STARTDELIM 0x01
534 #define DC_MII_READOP 0x02
535 #define DC_MII_WRITEOP 0x01
536 #define DC_MII_TURNAROUND 0x02
540 * Registers specific to clone devices.
541 * This mainly relates to RX filter programming: not all 21x4x clones
542 * use the standard DEC filter programming mechanism.
546 * ADMtek specific registers and constants for the AL981 and AN983.
547 * The AN983 doesn't use the magic PHY registers.
549 #define DC_AL_CR 0x88 /* command register */
550 #define DC_AL_PAR0 0xA4 /* station address */
551 #define DC_AL_PAR1 0xA8 /* station address */
552 #define DC_AL_MAR0 0xAC /* multicast hash filter */
553 #define DC_AL_MAR1 0xB0 /* multicast hash filter */
554 #define DC_AL_BMCR 0xB4 /* built in PHY control */
555 #define DC_AL_BMSR 0xB8 /* built in PHY status */
556 #define DC_AL_VENID 0xBC /* built in PHY ID0 */
557 #define DC_AL_DEVID 0xC0 /* built in PHY ID1 */
558 #define DC_AL_ANAR 0xC4 /* built in PHY autoneg advert */
559 #define DC_AL_LPAR 0xC8 /* bnilt in PHY link part. ability */
560 #define DC_AL_ANER 0xCC /* built in PHY autoneg expansion */
562 #define DC_AL_CR_ATUR 0x00000001 /* automatic TX underrun recovery */
563 #define DC_ADMTEK_PHYADDR 0x1
564 #define DC_AL_EE_NODEADDR 4
565 /* End of ADMtek specific registers */
568 * ASIX specific registers.
570 #define DC_AX_FILTIDX 0x68 /* RX filter index */
571 #define DC_AX_FILTDATA 0x70 /* RX filter data */
574 * Special ASIX-specific bits in the ASIX NETCFG register (CSR6).
576 #define DC_AX_NETCFG_RX_BROAD 0x00000100
579 * RX Filter Index Register values
581 #define DC_AX_FILTIDX_PAR0 0x00000000
582 #define DC_AX_FILTIDX_PAR1 0x00000001
583 #define DC_AX_FILTIDX_MAR0 0x00000002
584 #define DC_AX_FILTIDX_MAR1 0x00000003
585 /* End of ASIX specific registers */
588 * Macronix specific registers. The Macronix chips have a special
589 * register for reading the NWAY status, which we don't use, plus
590 * a magic packet register, which we need to tweak a bit per the
591 * Macronix application notes.
593 #define DC_MX_MAGICPACKET 0x80
594 #define DC_MX_NWAYSTAT 0xA0
597 * Magic packet register
599 #define DC_MX_MPACK_DISABLE 0x00400000
602 * NWAY status register.
604 #define DC_MX_NWAY_10BTHALF 0x08000000
605 #define DC_MX_NWAY_10BTFULL 0x10000000
606 #define DC_MX_NWAY_100BTHALF 0x20000000
607 #define DC_MX_NWAY_100BTFULL 0x40000000
608 #define DC_MX_NWAY_100BT4 0x80000000
611 * These are magic values that must be written into CSR16
612 * (DC_MX_MAGICPACKET) in order to put the chip into proper
613 * operating mode. The magic numbers are documented in the
614 * Macronix 98715 application notes.
616 #define DC_MX_MAGIC_98713 0x0F370000
617 #define DC_MX_MAGIC_98713A 0x0B3C0000
618 #define DC_MX_MAGIC_98715 0x0B3C0000
619 #define DC_MX_MAGIC_98725 0x0B3C0000
620 /* End of Macronix specific registers */
623 * PNIC 82c168/82c169 specific registers.
624 * The PNIC has its own special NWAY support, which doesn't work,
625 * and shortcut ways of reading the EEPROM and MII bus.
627 #define DC_PN_GPIO 0x60 /* general purpose pins control */
628 #define DC_PN_PWRUP_CFG 0x90 /* config register, set by EEPROM */
629 #define DC_PN_SIOCTL 0x98 /* serial EEPROM control register */
630 #define DC_PN_MII 0xA0 /* MII access register */
631 #define DC_PN_NWAY 0xB8 /* Internal NWAY register */
633 /* Serial I/O EEPROM register */
634 #define DC_PN_SIOCTL_DATA 0x0000003F
635 #define DC_PN_SIOCTL_OPCODE 0x00000300
636 #define DC_PN_SIOCTL_BUSY 0x80000000
638 #define DC_PN_EEOPCODE_ERASE 0x00000300
639 #define DC_PN_EEOPCODE_READ 0x00000600
640 #define DC_PN_EEOPCODE_WRITE 0x00000100
643 * The first two general purpose pins control speed selection and
644 * 100Mbps loopback on the 82c168 chip. The control bits should always
645 * be set (to make the data pins outputs) and the speed selction and
646 * loopback bits set accordingly when changing media. Physically, this
647 * will set the state of a relay mounted on the card.
649 #define DC_PN_GPIO_DATA0 0x000000001
650 #define DC_PN_GPIO_DATA1 0x000000002
651 #define DC_PN_GPIO_DATA2 0x000000004
652 #define DC_PN_GPIO_DATA3 0x000000008
653 #define DC_PN_GPIO_CTL0 0x000000010
654 #define DC_PN_GPIO_CTL1 0x000000020
655 #define DC_PN_GPIO_CTL2 0x000000040
656 #define DC_PN_GPIO_CTL3 0x000000080
657 #define DC_PN_GPIO_SPEEDSEL DC_PN_GPIO_DATA0/* 1 == 100Mbps, 0 == 10Mbps */
658 #define DC_PN_GPIO_100TX_LOOP DC_PN_GPIO_DATA1/* 1 == normal, 0 == loop */
659 #define DC_PN_GPIO_BNC_ENB DC_PN_GPIO_DATA2
660 #define DC_PN_GPIO_100TX_LNK DC_PN_GPIO_DATA3
661 #define DC_PN_GPIO_SETBIT(sc, r) \
662 DC_SETBIT(sc, DC_PN_GPIO, ((r) | (r << 4)))
663 #define DC_PN_GPIO_CLRBIT(sc, r) \
665 DC_SETBIT(sc, DC_PN_GPIO, ((r) << 4)); \
666 DC_CLRBIT(sc, DC_PN_GPIO, (r)); \
669 /* shortcut MII access register */
670 #define DC_PN_MII_DATA 0x0000FFFF
671 #define DC_PN_MII_RESERVER 0x00020000
672 #define DC_PN_MII_REGADDR 0x007C0000
673 #define DC_PN_MII_PHYADDR 0x0F800000
674 #define DC_PN_MII_OPCODE 0x30000000
675 #define DC_PN_MII_BUSY 0x80000000
677 #define DC_PN_MIIOPCODE_READ 0x60020000
678 #define DC_PN_MIIOPCODE_WRITE 0x50020000
680 /* Internal NWAY bits */
681 #define DC_PN_NWAY_RESET 0x00000001 /* reset */
682 #define DC_PN_NWAY_PDOWN 0x00000002 /* power down */
683 #define DC_PN_NWAY_BYPASS 0x00000004 /* bypass */
684 #define DC_PN_NWAY_AUILOWCUR 0x00000008 /* AUI low current */
685 #define DC_PN_NWAY_TPEXTEND 0x00000010 /* low squelch voltage */
686 #define DC_PN_NWAY_POLARITY 0x00000020 /* 0 == on, 1 == off */
687 #define DC_PN_NWAY_TP 0x00000040 /* 1 == tp, 0 == AUI */
688 #define DC_PN_NWAY_AUIVOLT 0x00000080 /* 1 == full, 0 == half */
689 #define DC_PN_NWAY_DUPLEX 0x00000100 /* LED, 1 == full, 0 == half */
690 #define DC_PN_NWAY_LINKTEST 0x00000200 /* 0 == on, 1 == off */
691 #define DC_PN_NWAY_AUTODETECT 0x00000400 /* 1 == off, 0 == on */
692 #define DC_PN_NWAY_SPEEDSEL 0x00000800 /* LED, 0 = 10, 1 == 100 */
693 #define DC_PN_NWAY_NWAY_ENB 0x00001000 /* 0 == off, 1 == on */
694 #define DC_PN_NWAY_CAP10HDX 0x00002000
695 #define DC_PN_NWAY_CAP10FDX 0x00004000
696 #define DC_PN_NWAY_CAP100FDX 0x00008000
697 #define DC_PN_NWAY_CAP100HDX 0x00010000
698 #define DC_PN_NWAY_CAP100T4 0x00020000
699 #define DC_PN_NWAY_ANEGRESTART 0x02000000 /* resets when aneg done */
700 #define DC_PN_NWAY_REMFAULT 0x04000000
701 #define DC_PN_NWAY_LPAR10HDX 0x08000000
702 #define DC_PN_NWAY_LPAR10FDX 0x10000000
703 #define DC_PN_NWAY_LPAR100FDX 0x20000000
704 #define DC_PN_NWAY_LPAR100HDX 0x40000000
705 #define DC_PN_NWAY_LPAR100T4 0x80000000
707 /* End of PNIC specific registers */
710 * CONEXANT specific registers.
713 #define DC_CONEXANT_PHYADDR 0x1
714 #define DC_CONEXANT_EE_NODEADDR 0x19A
716 /* End of CONEXANT specific registers */
720 struct ifnet *dc_ifp; /* interface info */
721 device_t dc_dev; /* device info */
722 bus_space_handle_t dc_bhandle; /* bus space handle */
723 bus_space_tag_t dc_btag; /* bus space tag */
724 bus_dma_tag_t dc_ltag; /* tag for descriptor ring */
725 bus_dmamap_t dc_lmap; /* map for descriptor ring */
726 u_int32_t dc_laddr; /* DMA address of dc_ldata */
727 bus_dma_tag_t dc_mtag; /* tag for mbufs */
728 bus_dmamap_t dc_sparemap;
729 bus_dma_tag_t dc_stag; /* tag for the setup frame */
730 bus_dmamap_t dc_smap; /* map for the setup frame */
731 u_int32_t dc_saddr; /* DMA address of setup frame */
733 struct resource *dc_irq;
734 struct resource *dc_res;
735 const struct dc_type *dc_info; /* adapter info */
740 u_int8_t dc_cachesize;
742 int dc_pnic_rx_bug_save;
743 unsigned char *dc_pnic_rx_buf;
747 u_int32_t dc_txthresh;
749 struct dc_mediainfo *dc_mi;
750 struct dc_list_data *dc_ldata;
751 struct dc_chain_data dc_cdata;
752 struct callout dc_stat_ch;
753 struct callout dc_wdog_ch;
756 #ifdef DEVICE_POLLING
757 int rxcycles; /* ... when polling */
759 int suspended; /* 0 = normal 1 = suspended */
763 #define DC_LOCK(_sc) mtx_lock(&(_sc)->dc_mtx)
764 #define DC_UNLOCK(_sc) mtx_unlock(&(_sc)->dc_mtx)
765 #define DC_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->dc_mtx, MA_OWNED)
767 #define DC_TX_POLL 0x00000001
768 #define DC_TX_COALESCE 0x00000002
769 #define DC_TX_ADMTEK_WAR 0x00000004
770 #define DC_TX_USE_TX_INTR 0x00000008
771 #define DC_RX_FILTER_TULIP 0x00000010
772 #define DC_TX_INTR_FIRSTFRAG 0x00000020
773 #define DC_PNIC_RX_BUG_WAR 0x00000040
774 #define DC_TX_FIXED_RING 0x00000080
775 #define DC_TX_STORENFWD 0x00000100
776 #define DC_REDUCED_MII_POLL 0x00000200
777 #define DC_TX_INTR_ALWAYS 0x00000400
778 #define DC_21143_NWAY 0x00000800
779 #define DC_128BIT_HASH 0x00001000
780 #define DC_64BIT_HASH 0x00002000
781 #define DC_TULIP_LEDS 0x00004000
782 #define DC_TX_ONE 0x00008000
783 #define DC_TX_ALIGN 0x00010000 /* align mbuf on tx */
786 * register space access macros
788 #define CSR_WRITE_4(sc, reg, val) \
789 bus_space_write_4(sc->dc_btag, sc->dc_bhandle, reg, val)
791 #define CSR_READ_4(sc, reg) \
792 bus_space_read_4(sc->dc_btag, sc->dc_bhandle, reg)
794 #define CSR_BARRIER_4(sc, reg, flags) \
795 bus_space_barrier(sc->dc_btag, sc->dc_bhandle, reg, 4, flags)
797 #define DC_TIMEOUT 1000
798 #define ETHER_ALIGN 2
801 * General constants that are fun to know.
807 #define DC_VENDORID_DEC 0x1011
810 * DEC/Intel 21143 PCI device ID
812 #define DC_DEVICEID_21143 0x0019
815 * Macronix PCI vendor ID
817 #define DC_VENDORID_MX 0x10D9
820 * Macronix PMAC device IDs.
822 #define DC_DEVICEID_98713 0x0512
823 #define DC_DEVICEID_987x5 0x0531
824 #define DC_DEVICEID_98727 0x0532
825 #define DC_DEVICEID_98732 0x0532
827 /* Macronix PCI revision codes. */
828 #define DC_REVISION_98713 0x00
829 #define DC_REVISION_98713A 0x10
830 #define DC_REVISION_98715 0x20
831 #define DC_REVISION_98715AEC_C 0x25
832 #define DC_REVISION_98725 0x30
835 * Compex PCI vendor ID.
837 #define DC_VENDORID_CP 0x11F6
840 * Compex PMAC PCI device IDs.
842 #define DC_DEVICEID_98713_CP 0x9881
845 * Lite-On PNIC PCI vendor ID
847 #define DC_VENDORID_LO 0x11AD
850 * 82c168/82c169 PNIC device IDs. Both chips have the same device
851 * ID but different revisions. Revision 0x10 is the 82c168, and
852 * 0x20 is the 82c169.
854 #define DC_DEVICEID_82C168 0x0002
856 #define DC_REVISION_82C168 0x10
857 #define DC_REVISION_82C169 0x20
860 * Lite-On PNIC II device ID. Note: this is actually a Macronix 98715A
861 * with wake on lan/magic packet support.
863 #define DC_DEVICEID_82C115 0xc115
868 #define DC_VENDORID_DAVICOM 0x1282
871 * Davicom device IDs.
873 #define DC_DEVICEID_DM9009 0x9009
874 #define DC_DEVICEID_DM9100 0x9100
875 #define DC_DEVICEID_DM9102 0x9102
878 * The DM9102A has the same PCI device ID as the DM9102,
879 * but a higher revision code.
881 #define DC_REVISION_DM9102 0x10
882 #define DC_REVISION_DM9102A 0x30
887 #define DC_VENDORID_ADMTEK 0x1317
892 #define DC_DEVICEID_AL981 0x0981
893 #define DC_DEVICEID_AN983 0x0985
894 #define DC_DEVICEID_AN985 0x1985
895 #define DC_DEVICEID_ADM9511 0x9511
896 #define DC_DEVICEID_ADM9513 0x9513
901 #define DC_VENDORID_3COM 0x10b7
904 * 3COM OfficeConnect 10/100B (3CSOHO100B-TX)
906 #define DC_DEVICEID_3CSOHOB 0x9300
911 #define DC_VENDORID_ASIX 0x125B
916 #define DC_DEVICEID_AX88140A 0x1400
919 * The ASIX AX88140 and ASIX AX88141 have the same vendor and
920 * device IDs but different revision values.
922 #define DC_REVISION_88140 0x00
923 #define DC_REVISION_88141 0x10
928 #define DC_VENDORID_ACCTON 0x1113
933 #define DC_DEVICEID_EN1217 0x1217
934 #define DC_DEVICEID_EN2242 0x1216
939 #define DC_VENDORID_XIRCOM 0x115d
944 #define DC_DEVICEID_X3201 0x0003
949 #define DC_VENDORID_DLINK 0x1186
954 #define DC_DEVICEID_DRP32TXD 0x1561
959 #define DC_VENDORID_ABOCOM 0x13d1
964 #define DC_DEVICEID_FE2500 0xAB02
965 #define DC_DEVICEID_FE2500MX 0xab08
968 * Conexant vendor ID.
970 #define DC_VENDORID_CONEXANT 0x14f1
973 * Conexant device IDs.
975 #define DC_DEVICEID_RS7112 0x1803
980 #define DC_VENDORID_PLANEX 0x14ea
985 #define DC_DEVICEID_FNW3602T 0xab08
988 * Not sure who this vendor should be, so we'll go with HAWKING until
989 * I can locate the right one.
991 #define DC_VENDORID_HAWKING 0x17b3
994 * Sure looks like an abocom device ID, but it found on my hawking PN672TX
995 * card. Use that for now, and upgrade later.
997 #define DC_DEVICEID_HAWKING_PN672TX 0xab08
1000 * Microsoft device ID.
1002 #define DC_VENDORID_MICROSOFT 0x1414
1005 * Supported Microsoft PCI and cardbus NICs. These are really
1006 * ADMtek parts in disguise.
1009 #define DC_DEVICEID_MSMN120 0x0001
1010 #define DC_DEVICEID_MSMN130 0x0002
1013 * Linksys vendor ID.
1015 #define DC_VENDORID_LINKSYS 0x1737
1018 * Linksys device IDs.
1020 #define DC_DEVICEID_PCMPC200_AB08 0xab08
1021 #define DC_DEVICEID_PCMPC200_AB09 0xab09
1023 #define DC_DEVID(vendor, device) ((device) << 16 | (vendor))
1026 * PCI low memory base and low I/O base register, and
1027 * other PCI registers.
1030 #define DC_PCI_CFBIO PCIR_BAR(0) /* Base I/O address */
1031 #define DC_PCI_CFBMA PCIR_BAR(1) /* Base memory address */
1032 #define DC_PCI_CFDD 0x40 /* Device and driver area */
1033 #define DC_PCI_CWUA0 0x44 /* Wake-Up LAN addr 0 */
1034 #define DC_PCI_CWUA1 0x48 /* Wake-Up LAN addr 1 */
1035 #define DC_PCI_SOP0 0x4C /* SecureON passwd 0 */
1036 #define DC_PCI_SOP1 0x50 /* SecureON passwd 1 */
1037 #define DC_PCI_CWUC 0x54 /* Configuration Wake-Up cmd */
1039 #define DC_21143_PB_REV 0x00000030
1040 #define DC_21143_TB_REV 0x00000030
1041 #define DC_21143_PC_REV 0x00000030
1042 #define DC_21143_TC_REV 0x00000030
1043 #define DC_21143_PD_REV 0x00000041
1044 #define DC_21143_TD_REV 0x00000041
1046 /* Configuration and driver area */
1047 #define DC_CFDD_DRVUSE 0x0000FFFF
1048 #define DC_CFDD_SNOOZE_MODE 0x40000000
1049 #define DC_CFDD_SLEEP_MODE 0x80000000
1051 /* Configuration wake-up command register */
1052 #define DC_CWUC_MUST_BE_ZERO 0x00000001
1053 #define DC_CWUC_SECUREON_ENB 0x00000002
1054 #define DC_CWUC_FORCE_WUL 0x00000004
1055 #define DC_CWUC_BNC_ABILITY 0x00000008
1056 #define DC_CWUC_AUI_ABILITY 0x00000010
1057 #define DC_CWUC_TP10_ABILITY 0x00000020
1058 #define DC_CWUC_MII_ABILITY 0x00000040
1059 #define DC_CWUC_SYM_ABILITY 0x00000080
1060 #define DC_CWUC_LOCK 0x00000100
1066 #define DC_IB_CTLRCNT 0x13
1067 #define DC_IB_LEAF0_CNUM 0x1A
1068 #define DC_IB_LEAF0_OFFSET 0x1B
1070 struct dc_info_leaf {
1071 u_int16_t dc_conntype;
1074 u_int16_t dc_infoblk;
1077 #define DC_CTYPE_10BT 0x0000
1078 #define DC_CTYPE_10BT_NWAY 0x0100
1079 #define DC_CTYPE_10BT_FDX 0x0204
1080 #define DC_CTYPE_10B2 0x0001
1081 #define DC_CTYPE_10B5 0x0002
1082 #define DC_CTYPE_100BT 0x0003
1083 #define DC_CTYPE_100BT_FDX 0x0205
1084 #define DC_CTYPE_100T4 0x0006
1085 #define DC_CTYPE_100FX 0x0007
1086 #define DC_CTYPE_100FX_FDX 0x0208
1087 #define DC_CTYPE_MII_10BT 0x0009
1088 #define DC_CTYPE_MII_10BT_FDX 0x020A
1089 #define DC_CTYPE_MII_100BT 0x000D
1090 #define DC_CTYPE_MII_100BT_FDX 0x020E
1091 #define DC_CTYPE_MII_100T4 0x000F
1092 #define DC_CTYPE_MII_100FX 0x0010
1093 #define DC_CTYPE_MII_100FX_FDX 0x0211
1094 #define DC_CTYPE_DYN_PUP_AUTOSENSE 0x0800
1095 #define DC_CTYPE_PUP_AUTOSENSE 0x8800
1096 #define DC_CTYPE_NOMEDIA 0xFFFF
1098 #define DC_EBLOCK_SIA 0x0002
1099 #define DC_EBLOCK_MII 0x0003
1100 #define DC_EBLOCK_SYM 0x0004
1101 #define DC_EBLOCK_RESET 0x0005
1102 #define DC_EBLOCK_PHY_SHUTDOWN 0x0006
1104 struct dc_leaf_hdr {
1110 struct dc_eblock_hdr {
1115 struct dc_eblock_sia {
1116 struct dc_eblock_hdr dc_sia_hdr;
1117 u_int8_t dc_sia_code;
1119 struct dc_sia_ext { /* if (dc_sia_code & DC_SIA_CODE_EXT) */
1120 u_int8_t dc_sia_mediaspec[6]; /* CSR13, CSR14, CSR15 */
1121 u_int8_t dc_sia_gpio_ctl[2];
1122 u_int8_t dc_sia_gpio_dat[2];
1124 struct dc_sia_noext {
1125 u_int8_t dc_sia_gpio_ctl[2];
1126 u_int8_t dc_sia_gpio_dat[2];
1131 #define DC_SIA_CODE_10BT 0x00
1132 #define DC_SIA_CODE_10B2 0x01
1133 #define DC_SIA_CODE_10B5 0x02
1134 #define DC_SIA_CODE_10BT_FDX 0x04
1135 #define DC_SIA_CODE_EXT 0x40
1138 * Note that the first word in the gpr and reset
1139 * sequences is always a control word.
1141 struct dc_eblock_mii {
1142 struct dc_eblock_hdr dc_mii_hdr;
1143 u_int8_t dc_mii_phynum;
1144 u_int8_t dc_gpr_len;
1145 /* u_int16_t dc_gpr_dat[n]; */
1146 /* u_int8_t dc_reset_len; */
1147 /* u_int16_t dc_reset_dat[n]; */
1148 /* There are other fields after these, but we don't
1149 * care about them since they can be determined by looking
1154 struct dc_eblock_sym {
1155 struct dc_eblock_hdr dc_sym_hdr;
1156 u_int8_t dc_sym_code;
1157 u_int8_t dc_sym_gpio_ctl[2];
1158 u_int8_t dc_sym_gpio_dat[2];
1159 u_int8_t dc_sym_cmd[2];
1162 #define DC_SYM_CODE_100BT 0x03
1163 #define DC_SYM_CODE_100BT_FDX 0x05
1164 #define DC_SYM_CODE_100T4 0x06
1165 #define DC_SYM_CODE_100FX 0x07
1166 #define DC_SYM_CODE_100FX_FDX 0x08
1168 struct dc_eblock_reset {
1169 struct dc_eblock_hdr dc_reset_hdr;
1170 u_int8_t dc_reset_len;
1171 /* u_int16_t dc_reset_dat[n]; */