2 * Copyright © 2006-2007 Intel Corporation
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
21 * DEALINGS IN THE SOFTWARE.
24 * Eric Anholt <eric@anholt.net>
27 #include <sys/cdefs.h>
28 __FBSDID("$FreeBSD$");
30 #include <dev/drm2/drmP.h>
31 #include <dev/drm2/drm.h>
32 #include <dev/drm2/i915/i915_drm.h>
33 #include <dev/drm2/i915/i915_drv.h>
34 #include <dev/drm2/i915/intel_drv.h>
35 #include <dev/drm2/drm_edid.h>
36 #include <dev/drm2/drm_dp_helper.h>
37 #include <dev/drm2/drm_crtc_helper.h>
38 #include <sys/limits.h>
40 #define HAS_eDP (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
42 bool intel_pipe_has_type(struct drm_crtc *crtc, int type);
43 static void intel_increase_pllclock(struct drm_crtc *crtc);
44 static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on);
67 #define INTEL_P2_NUM 2
68 typedef struct intel_limit intel_limit_t;
70 intel_range_t dot, vco, n, m, m1, m2, p, p1;
72 bool (* find_pll)(const intel_limit_t *, struct drm_crtc *,
73 int, int, intel_clock_t *, intel_clock_t *);
77 #define IRONLAKE_FDI_FREQ 2700000 /* in kHz for mode->clock */
80 intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
81 int target, int refclk, intel_clock_t *match_clock,
82 intel_clock_t *best_clock);
84 intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
85 int target, int refclk, intel_clock_t *match_clock,
86 intel_clock_t *best_clock);
89 intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc,
90 int target, int refclk, intel_clock_t *match_clock,
91 intel_clock_t *best_clock);
93 intel_find_pll_ironlake_dp(const intel_limit_t *, struct drm_crtc *crtc,
94 int target, int refclk, intel_clock_t *match_clock,
95 intel_clock_t *best_clock);
97 static inline u32 /* units of 100MHz */
98 intel_fdi_link_freq(struct drm_device *dev)
101 struct drm_i915_private *dev_priv = dev->dev_private;
102 return (I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2;
107 static const intel_limit_t intel_limits_i8xx_dvo = {
108 .dot = { .min = 25000, .max = 350000 },
109 .vco = { .min = 930000, .max = 1400000 },
110 .n = { .min = 3, .max = 16 },
111 .m = { .min = 96, .max = 140 },
112 .m1 = { .min = 18, .max = 26 },
113 .m2 = { .min = 6, .max = 16 },
114 .p = { .min = 4, .max = 128 },
115 .p1 = { .min = 2, .max = 33 },
116 .p2 = { .dot_limit = 165000,
117 .p2_slow = 4, .p2_fast = 2 },
118 .find_pll = intel_find_best_PLL,
121 static const intel_limit_t intel_limits_i8xx_lvds = {
122 .dot = { .min = 25000, .max = 350000 },
123 .vco = { .min = 930000, .max = 1400000 },
124 .n = { .min = 3, .max = 16 },
125 .m = { .min = 96, .max = 140 },
126 .m1 = { .min = 18, .max = 26 },
127 .m2 = { .min = 6, .max = 16 },
128 .p = { .min = 4, .max = 128 },
129 .p1 = { .min = 1, .max = 6 },
130 .p2 = { .dot_limit = 165000,
131 .p2_slow = 14, .p2_fast = 7 },
132 .find_pll = intel_find_best_PLL,
135 static const intel_limit_t intel_limits_i9xx_sdvo = {
136 .dot = { .min = 20000, .max = 400000 },
137 .vco = { .min = 1400000, .max = 2800000 },
138 .n = { .min = 1, .max = 6 },
139 .m = { .min = 70, .max = 120 },
140 .m1 = { .min = 10, .max = 22 },
141 .m2 = { .min = 5, .max = 9 },
142 .p = { .min = 5, .max = 80 },
143 .p1 = { .min = 1, .max = 8 },
144 .p2 = { .dot_limit = 200000,
145 .p2_slow = 10, .p2_fast = 5 },
146 .find_pll = intel_find_best_PLL,
149 static const intel_limit_t intel_limits_i9xx_lvds = {
150 .dot = { .min = 20000, .max = 400000 },
151 .vco = { .min = 1400000, .max = 2800000 },
152 .n = { .min = 1, .max = 6 },
153 .m = { .min = 70, .max = 120 },
154 .m1 = { .min = 10, .max = 22 },
155 .m2 = { .min = 5, .max = 9 },
156 .p = { .min = 7, .max = 98 },
157 .p1 = { .min = 1, .max = 8 },
158 .p2 = { .dot_limit = 112000,
159 .p2_slow = 14, .p2_fast = 7 },
160 .find_pll = intel_find_best_PLL,
164 static const intel_limit_t intel_limits_g4x_sdvo = {
165 .dot = { .min = 25000, .max = 270000 },
166 .vco = { .min = 1750000, .max = 3500000},
167 .n = { .min = 1, .max = 4 },
168 .m = { .min = 104, .max = 138 },
169 .m1 = { .min = 17, .max = 23 },
170 .m2 = { .min = 5, .max = 11 },
171 .p = { .min = 10, .max = 30 },
172 .p1 = { .min = 1, .max = 3},
173 .p2 = { .dot_limit = 270000,
177 .find_pll = intel_g4x_find_best_PLL,
180 static const intel_limit_t intel_limits_g4x_hdmi = {
181 .dot = { .min = 22000, .max = 400000 },
182 .vco = { .min = 1750000, .max = 3500000},
183 .n = { .min = 1, .max = 4 },
184 .m = { .min = 104, .max = 138 },
185 .m1 = { .min = 16, .max = 23 },
186 .m2 = { .min = 5, .max = 11 },
187 .p = { .min = 5, .max = 80 },
188 .p1 = { .min = 1, .max = 8},
189 .p2 = { .dot_limit = 165000,
190 .p2_slow = 10, .p2_fast = 5 },
191 .find_pll = intel_g4x_find_best_PLL,
194 static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
195 .dot = { .min = 20000, .max = 115000 },
196 .vco = { .min = 1750000, .max = 3500000 },
197 .n = { .min = 1, .max = 3 },
198 .m = { .min = 104, .max = 138 },
199 .m1 = { .min = 17, .max = 23 },
200 .m2 = { .min = 5, .max = 11 },
201 .p = { .min = 28, .max = 112 },
202 .p1 = { .min = 2, .max = 8 },
203 .p2 = { .dot_limit = 0,
204 .p2_slow = 14, .p2_fast = 14
206 .find_pll = intel_g4x_find_best_PLL,
209 static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
210 .dot = { .min = 80000, .max = 224000 },
211 .vco = { .min = 1750000, .max = 3500000 },
212 .n = { .min = 1, .max = 3 },
213 .m = { .min = 104, .max = 138 },
214 .m1 = { .min = 17, .max = 23 },
215 .m2 = { .min = 5, .max = 11 },
216 .p = { .min = 14, .max = 42 },
217 .p1 = { .min = 2, .max = 6 },
218 .p2 = { .dot_limit = 0,
219 .p2_slow = 7, .p2_fast = 7
221 .find_pll = intel_g4x_find_best_PLL,
224 static const intel_limit_t intel_limits_g4x_display_port = {
225 .dot = { .min = 161670, .max = 227000 },
226 .vco = { .min = 1750000, .max = 3500000},
227 .n = { .min = 1, .max = 2 },
228 .m = { .min = 97, .max = 108 },
229 .m1 = { .min = 0x10, .max = 0x12 },
230 .m2 = { .min = 0x05, .max = 0x06 },
231 .p = { .min = 10, .max = 20 },
232 .p1 = { .min = 1, .max = 2},
233 .p2 = { .dot_limit = 0,
234 .p2_slow = 10, .p2_fast = 10 },
235 .find_pll = intel_find_pll_g4x_dp,
238 static const intel_limit_t intel_limits_pineview_sdvo = {
239 .dot = { .min = 20000, .max = 400000},
240 .vco = { .min = 1700000, .max = 3500000 },
241 /* Pineview's Ncounter is a ring counter */
242 .n = { .min = 3, .max = 6 },
243 .m = { .min = 2, .max = 256 },
244 /* Pineview only has one combined m divider, which we treat as m2. */
245 .m1 = { .min = 0, .max = 0 },
246 .m2 = { .min = 0, .max = 254 },
247 .p = { .min = 5, .max = 80 },
248 .p1 = { .min = 1, .max = 8 },
249 .p2 = { .dot_limit = 200000,
250 .p2_slow = 10, .p2_fast = 5 },
251 .find_pll = intel_find_best_PLL,
254 static const intel_limit_t intel_limits_pineview_lvds = {
255 .dot = { .min = 20000, .max = 400000 },
256 .vco = { .min = 1700000, .max = 3500000 },
257 .n = { .min = 3, .max = 6 },
258 .m = { .min = 2, .max = 256 },
259 .m1 = { .min = 0, .max = 0 },
260 .m2 = { .min = 0, .max = 254 },
261 .p = { .min = 7, .max = 112 },
262 .p1 = { .min = 1, .max = 8 },
263 .p2 = { .dot_limit = 112000,
264 .p2_slow = 14, .p2_fast = 14 },
265 .find_pll = intel_find_best_PLL,
268 /* Ironlake / Sandybridge
270 * We calculate clock using (register_value + 2) for N/M1/M2, so here
271 * the range value for them is (actual_value - 2).
273 static const intel_limit_t intel_limits_ironlake_dac = {
274 .dot = { .min = 25000, .max = 350000 },
275 .vco = { .min = 1760000, .max = 3510000 },
276 .n = { .min = 1, .max = 5 },
277 .m = { .min = 79, .max = 127 },
278 .m1 = { .min = 12, .max = 22 },
279 .m2 = { .min = 5, .max = 9 },
280 .p = { .min = 5, .max = 80 },
281 .p1 = { .min = 1, .max = 8 },
282 .p2 = { .dot_limit = 225000,
283 .p2_slow = 10, .p2_fast = 5 },
284 .find_pll = intel_g4x_find_best_PLL,
287 static const intel_limit_t intel_limits_ironlake_single_lvds = {
288 .dot = { .min = 25000, .max = 350000 },
289 .vco = { .min = 1760000, .max = 3510000 },
290 .n = { .min = 1, .max = 3 },
291 .m = { .min = 79, .max = 118 },
292 .m1 = { .min = 12, .max = 22 },
293 .m2 = { .min = 5, .max = 9 },
294 .p = { .min = 28, .max = 112 },
295 .p1 = { .min = 2, .max = 8 },
296 .p2 = { .dot_limit = 225000,
297 .p2_slow = 14, .p2_fast = 14 },
298 .find_pll = intel_g4x_find_best_PLL,
301 static const intel_limit_t intel_limits_ironlake_dual_lvds = {
302 .dot = { .min = 25000, .max = 350000 },
303 .vco = { .min = 1760000, .max = 3510000 },
304 .n = { .min = 1, .max = 3 },
305 .m = { .min = 79, .max = 127 },
306 .m1 = { .min = 12, .max = 22 },
307 .m2 = { .min = 5, .max = 9 },
308 .p = { .min = 14, .max = 56 },
309 .p1 = { .min = 2, .max = 8 },
310 .p2 = { .dot_limit = 225000,
311 .p2_slow = 7, .p2_fast = 7 },
312 .find_pll = intel_g4x_find_best_PLL,
315 /* LVDS 100mhz refclk limits. */
316 static const intel_limit_t intel_limits_ironlake_single_lvds_100m = {
317 .dot = { .min = 25000, .max = 350000 },
318 .vco = { .min = 1760000, .max = 3510000 },
319 .n = { .min = 1, .max = 2 },
320 .m = { .min = 79, .max = 126 },
321 .m1 = { .min = 12, .max = 22 },
322 .m2 = { .min = 5, .max = 9 },
323 .p = { .min = 28, .max = 112 },
324 .p1 = { .min = 2, .max = 8 },
325 .p2 = { .dot_limit = 225000,
326 .p2_slow = 14, .p2_fast = 14 },
327 .find_pll = intel_g4x_find_best_PLL,
330 static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = {
331 .dot = { .min = 25000, .max = 350000 },
332 .vco = { .min = 1760000, .max = 3510000 },
333 .n = { .min = 1, .max = 3 },
334 .m = { .min = 79, .max = 126 },
335 .m1 = { .min = 12, .max = 22 },
336 .m2 = { .min = 5, .max = 9 },
337 .p = { .min = 14, .max = 42 },
338 .p1 = { .min = 2, .max = 6 },
339 .p2 = { .dot_limit = 225000,
340 .p2_slow = 7, .p2_fast = 7 },
341 .find_pll = intel_g4x_find_best_PLL,
344 static const intel_limit_t intel_limits_ironlake_display_port = {
345 .dot = { .min = 25000, .max = 350000 },
346 .vco = { .min = 1760000, .max = 3510000},
347 .n = { .min = 1, .max = 2 },
348 .m = { .min = 81, .max = 90 },
349 .m1 = { .min = 12, .max = 22 },
350 .m2 = { .min = 5, .max = 9 },
351 .p = { .min = 10, .max = 20 },
352 .p1 = { .min = 1, .max = 2},
353 .p2 = { .dot_limit = 0,
354 .p2_slow = 10, .p2_fast = 10 },
355 .find_pll = intel_find_pll_ironlake_dp,
358 u32 intel_dpio_read(struct drm_i915_private *dev_priv, int reg)
362 mtx_lock(&dev_priv->dpio_lock);
363 if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
364 DRM_ERROR("DPIO idle wait timed out\n");
368 I915_WRITE(DPIO_REG, reg);
369 I915_WRITE(DPIO_PKT, DPIO_RID | DPIO_OP_READ | DPIO_PORTID |
371 if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
372 DRM_ERROR("DPIO read wait timed out\n");
375 val = I915_READ(DPIO_DATA);
378 mtx_unlock(&dev_priv->dpio_lock);
383 static void intel_dpio_write(struct drm_i915_private *dev_priv, int reg,
387 mtx_lock(&dev_priv->dpio_lock);
388 if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) {
389 DRM_ERROR("DPIO idle wait timed out\n");
393 I915_WRITE(DPIO_DATA, val);
394 I915_WRITE(DPIO_REG, reg);
395 I915_WRITE(DPIO_PKT, DPIO_RID | DPIO_OP_WRITE | DPIO_PORTID |
397 if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100))
398 DRM_ERROR("DPIO write wait timed out\n");
401 mtx_unlock(&dev_priv->dpio_lock);
405 static void vlv_init_dpio(struct drm_device *dev)
407 struct drm_i915_private *dev_priv = dev->dev_private;
409 /* Reset the DPIO config */
410 I915_WRITE(DPIO_CTL, 0);
411 POSTING_READ(DPIO_CTL);
412 I915_WRITE(DPIO_CTL, 1);
413 POSTING_READ(DPIO_CTL);
416 static int intel_dual_link_lvds_callback(const struct dmi_system_id *id)
418 DRM_INFO("Forcing lvds to dual link mode on %s\n", id->ident);
422 static const struct dmi_system_id intel_dual_link_lvds[] = {
424 .callback = intel_dual_link_lvds_callback,
425 .ident = "Apple MacBook Pro (Core i5/i7 Series)",
427 DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
428 DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro8,2"),
431 { } /* terminating entry */
434 static bool is_dual_link_lvds(struct drm_i915_private *dev_priv,
439 /* use the module option value if specified */
440 if (i915_lvds_channel_mode > 0)
441 return i915_lvds_channel_mode == 2;
443 if (dmi_check_system(intel_dual_link_lvds))
446 if (dev_priv->lvds_val)
447 val = dev_priv->lvds_val;
449 /* BIOS should set the proper LVDS register value at boot, but
450 * in reality, it doesn't set the value when the lid is closed;
451 * we need to check "the value to be set" in VBT when LVDS
452 * register is uninitialized.
454 val = I915_READ(reg);
455 if (!(val & ~LVDS_DETECTED))
456 val = dev_priv->bios_lvds_val;
457 dev_priv->lvds_val = val;
459 return (val & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP;
462 static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc,
465 struct drm_device *dev = crtc->dev;
466 struct drm_i915_private *dev_priv = dev->dev_private;
467 const intel_limit_t *limit;
469 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
470 if (is_dual_link_lvds(dev_priv, PCH_LVDS)) {
471 /* LVDS dual channel */
472 if (refclk == 100000)
473 limit = &intel_limits_ironlake_dual_lvds_100m;
475 limit = &intel_limits_ironlake_dual_lvds;
477 if (refclk == 100000)
478 limit = &intel_limits_ironlake_single_lvds_100m;
480 limit = &intel_limits_ironlake_single_lvds;
482 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
484 limit = &intel_limits_ironlake_display_port;
486 limit = &intel_limits_ironlake_dac;
491 static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc)
493 struct drm_device *dev = crtc->dev;
494 struct drm_i915_private *dev_priv = dev->dev_private;
495 const intel_limit_t *limit;
497 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
498 if (is_dual_link_lvds(dev_priv, LVDS))
499 /* LVDS with dual channel */
500 limit = &intel_limits_g4x_dual_channel_lvds;
502 /* LVDS with dual channel */
503 limit = &intel_limits_g4x_single_channel_lvds;
504 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) ||
505 intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
506 limit = &intel_limits_g4x_hdmi;
507 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
508 limit = &intel_limits_g4x_sdvo;
509 } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
510 limit = &intel_limits_g4x_display_port;
511 } else /* The option is for other outputs */
512 limit = &intel_limits_i9xx_sdvo;
517 static const intel_limit_t *intel_limit(struct drm_crtc *crtc, int refclk)
519 struct drm_device *dev = crtc->dev;
520 const intel_limit_t *limit;
522 if (HAS_PCH_SPLIT(dev))
523 limit = intel_ironlake_limit(crtc, refclk);
524 else if (IS_G4X(dev)) {
525 limit = intel_g4x_limit(crtc);
526 } else if (IS_PINEVIEW(dev)) {
527 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
528 limit = &intel_limits_pineview_lvds;
530 limit = &intel_limits_pineview_sdvo;
531 } else if (!IS_GEN2(dev)) {
532 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
533 limit = &intel_limits_i9xx_lvds;
535 limit = &intel_limits_i9xx_sdvo;
537 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
538 limit = &intel_limits_i8xx_lvds;
540 limit = &intel_limits_i8xx_dvo;
545 /* m1 is reserved as 0 in Pineview, n is a ring counter */
546 static void pineview_clock(int refclk, intel_clock_t *clock)
548 clock->m = clock->m2 + 2;
549 clock->p = clock->p1 * clock->p2;
550 clock->vco = refclk * clock->m / clock->n;
551 clock->dot = clock->vco / clock->p;
554 static void intel_clock(struct drm_device *dev, int refclk, intel_clock_t *clock)
556 if (IS_PINEVIEW(dev)) {
557 pineview_clock(refclk, clock);
560 clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
561 clock->p = clock->p1 * clock->p2;
562 clock->vco = refclk * clock->m / (clock->n + 2);
563 clock->dot = clock->vco / clock->p;
567 * Returns whether any output on the specified pipe is of the specified type
569 bool intel_pipe_has_type(struct drm_crtc *crtc, int type)
571 struct drm_device *dev = crtc->dev;
572 struct drm_mode_config *mode_config = &dev->mode_config;
573 struct intel_encoder *encoder;
575 list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
576 if (encoder->base.crtc == crtc && encoder->type == type)
582 #define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0)
584 * Returns whether the given set of divisors are valid for a given refclk with
585 * the given connectors.
588 static bool intel_PLL_is_valid(struct drm_device *dev,
589 const intel_limit_t *limit,
590 const intel_clock_t *clock)
592 if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
593 INTELPllInvalid("p1 out of range\n");
594 if (clock->p < limit->p.min || limit->p.max < clock->p)
595 INTELPllInvalid("p out of range\n");
596 if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
597 INTELPllInvalid("m2 out of range\n");
598 if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
599 INTELPllInvalid("m1 out of range\n");
600 if (clock->m1 <= clock->m2 && !IS_PINEVIEW(dev))
601 INTELPllInvalid("m1 <= m2\n");
602 if (clock->m < limit->m.min || limit->m.max < clock->m)
603 INTELPllInvalid("m out of range\n");
604 if (clock->n < limit->n.min || limit->n.max < clock->n)
605 INTELPllInvalid("n out of range\n");
606 if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
607 INTELPllInvalid("vco out of range\n");
608 /* XXX: We may need to be checking "Dot clock" depending on the multiplier,
609 * connector, etc., rather than just a single range.
611 if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
612 INTELPllInvalid("dot out of range\n");
618 intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
619 int target, int refclk, intel_clock_t *match_clock,
620 intel_clock_t *best_clock)
623 struct drm_device *dev = crtc->dev;
624 struct drm_i915_private *dev_priv = dev->dev_private;
628 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
629 (I915_READ(LVDS)) != 0) {
631 * For LVDS, if the panel is on, just rely on its current
632 * settings for dual-channel. We haven't figured out how to
633 * reliably set up different single/dual channel state, if we
636 if (is_dual_link_lvds(dev_priv, LVDS))
637 clock.p2 = limit->p2.p2_fast;
639 clock.p2 = limit->p2.p2_slow;
641 if (target < limit->p2.dot_limit)
642 clock.p2 = limit->p2.p2_slow;
644 clock.p2 = limit->p2.p2_fast;
647 memset(best_clock, 0, sizeof(*best_clock));
649 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
651 for (clock.m2 = limit->m2.min;
652 clock.m2 <= limit->m2.max; clock.m2++) {
653 /* m1 is always 0 in Pineview */
654 if (clock.m2 >= clock.m1 && !IS_PINEVIEW(dev))
656 for (clock.n = limit->n.min;
657 clock.n <= limit->n.max; clock.n++) {
658 for (clock.p1 = limit->p1.min;
659 clock.p1 <= limit->p1.max; clock.p1++) {
662 intel_clock(dev, refclk, &clock);
663 if (!intel_PLL_is_valid(dev, limit,
667 clock.p != match_clock->p)
670 this_err = abs(clock.dot - target);
671 if (this_err < err) {
680 return (err != target);
684 intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
685 int target, int refclk, intel_clock_t *match_clock,
686 intel_clock_t *best_clock)
688 struct drm_device *dev = crtc->dev;
689 struct drm_i915_private *dev_priv = dev->dev_private;
693 /* approximately equals target * 0.00585 */
694 int err_most = (target >> 8) + (target >> 9);
697 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
700 if (HAS_PCH_SPLIT(dev))
704 if ((I915_READ(lvds_reg) & LVDS_CLKB_POWER_MASK) ==
706 clock.p2 = limit->p2.p2_fast;
708 clock.p2 = limit->p2.p2_slow;
710 if (target < limit->p2.dot_limit)
711 clock.p2 = limit->p2.p2_slow;
713 clock.p2 = limit->p2.p2_fast;
716 memset(best_clock, 0, sizeof(*best_clock));
717 max_n = limit->n.max;
718 /* based on hardware requirement, prefer smaller n to precision */
719 for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
720 /* based on hardware requirement, prefere larger m1,m2 */
721 for (clock.m1 = limit->m1.max;
722 clock.m1 >= limit->m1.min; clock.m1--) {
723 for (clock.m2 = limit->m2.max;
724 clock.m2 >= limit->m2.min; clock.m2--) {
725 for (clock.p1 = limit->p1.max;
726 clock.p1 >= limit->p1.min; clock.p1--) {
729 intel_clock(dev, refclk, &clock);
730 if (!intel_PLL_is_valid(dev, limit,
734 clock.p != match_clock->p)
737 this_err = abs(clock.dot - target);
738 if (this_err < err_most) {
752 intel_find_pll_ironlake_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
753 int target, int refclk, intel_clock_t *match_clock,
754 intel_clock_t *best_clock)
756 struct drm_device *dev = crtc->dev;
759 if (target < 200000) {
772 intel_clock(dev, refclk, &clock);
773 memcpy(best_clock, &clock, sizeof(intel_clock_t));
777 /* DisplayPort has only two frequencies, 162MHz and 270MHz */
779 intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
780 int target, int refclk, intel_clock_t *match_clock,
781 intel_clock_t *best_clock)
784 if (target < 200000) {
797 clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2);
798 clock.p = (clock.p1 * clock.p2);
799 clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p;
801 memcpy(best_clock, &clock, sizeof(intel_clock_t));
805 static void ironlake_wait_for_vblank(struct drm_device *dev, int pipe)
807 struct drm_i915_private *dev_priv = dev->dev_private;
808 u32 frame, frame_reg = PIPEFRAME(pipe);
810 frame = I915_READ(frame_reg);
812 if (wait_for(I915_READ_NOTRACE(frame_reg) != frame, 50))
813 DRM_DEBUG_KMS("vblank wait timed out\n");
817 * intel_wait_for_vblank - wait for vblank on a given pipe
819 * @pipe: pipe to wait for
821 * Wait for vblank to occur on a given pipe. Needed for various bits of
824 void intel_wait_for_vblank(struct drm_device *dev, int pipe)
826 struct drm_i915_private *dev_priv = dev->dev_private;
827 int pipestat_reg = PIPESTAT(pipe);
829 if (INTEL_INFO(dev)->gen >= 5) {
830 ironlake_wait_for_vblank(dev, pipe);
834 /* Clear existing vblank status. Note this will clear any other
835 * sticky status fields as well.
837 * This races with i915_driver_irq_handler() with the result
838 * that either function could miss a vblank event. Here it is not
839 * fatal, as we will either wait upon the next vblank interrupt or
840 * timeout. Generally speaking intel_wait_for_vblank() is only
841 * called during modeset at which time the GPU should be idle and
842 * should *not* be performing page flips and thus not waiting on
844 * Currently, the result of us stealing a vblank from the irq
845 * handler is that a single frame will be skipped during swapbuffers.
847 I915_WRITE(pipestat_reg,
848 I915_READ(pipestat_reg) | PIPE_VBLANK_INTERRUPT_STATUS);
850 /* Wait for vblank interrupt bit to set */
851 if (_intel_wait_for(dev,
852 I915_READ(pipestat_reg) & PIPE_VBLANK_INTERRUPT_STATUS,
854 DRM_DEBUG_KMS("vblank wait timed out\n");
858 * intel_wait_for_pipe_off - wait for pipe to turn off
860 * @pipe: pipe to wait for
862 * After disabling a pipe, we can't wait for vblank in the usual way,
863 * spinning on the vblank interrupt status bit, since we won't actually
864 * see an interrupt when the pipe is disabled.
867 * wait for the pipe register state bit to turn off
870 * wait for the display line value to settle (it usually
871 * ends up stopping at the start of the next frame).
874 void intel_wait_for_pipe_off(struct drm_device *dev, int pipe)
876 struct drm_i915_private *dev_priv = dev->dev_private;
878 if (INTEL_INFO(dev)->gen >= 4) {
879 int reg = PIPECONF(pipe);
881 /* Wait for the Pipe State to go off */
882 if (_intel_wait_for(dev,
883 (I915_READ(reg) & I965_PIPECONF_ACTIVE) == 0, 100,
885 DRM_DEBUG_KMS("pipe_off wait timed out\n");
887 u32 last_line, line_mask;
888 int reg = PIPEDSL(pipe);
889 unsigned long timeout = jiffies + msecs_to_jiffies(100);
892 line_mask = DSL_LINEMASK_GEN2;
894 line_mask = DSL_LINEMASK_GEN3;
896 /* Wait for the display line to settle */
898 last_line = I915_READ(reg) & line_mask;
900 } while (((I915_READ(reg) & line_mask) != last_line) &&
901 time_after(timeout, jiffies));
902 if (time_after(jiffies, timeout))
903 DRM_DEBUG_KMS("pipe_off wait timed out\n");
907 static const char *state_string(bool enabled)
909 return enabled ? "on" : "off";
912 /* Only for pre-ILK configs */
913 static void assert_pll(struct drm_i915_private *dev_priv,
914 enum pipe pipe, bool state)
921 val = I915_READ(reg);
922 cur_state = !!(val & DPLL_VCO_ENABLE);
923 if (cur_state != state)
924 printf("PLL state assertion failure (expected %s, current %s)\n",
925 state_string(state), state_string(cur_state));
927 #define assert_pll_enabled(d, p) assert_pll(d, p, true)
928 #define assert_pll_disabled(d, p) assert_pll(d, p, false)
931 static void assert_pch_pll(struct drm_i915_private *dev_priv,
932 struct intel_crtc *intel_crtc,
939 if (HAS_PCH_LPT(dev_priv->dev)) {
940 DRM_DEBUG_DRIVER("LPT detected: skipping PCH PLL test\n");
944 if (!intel_crtc->pch_pll) {
945 printf("asserting PCH PLL enabled with no PLL\n");
949 if (HAS_PCH_CPT(dev_priv->dev)) {
952 pch_dpll = I915_READ(PCH_DPLL_SEL);
954 /* Make sure the selected PLL is enabled to the transcoder */
955 KASSERT(((pch_dpll >> (4 * intel_crtc->pipe)) & 8) != 0,
956 ("transcoder %d PLL not enabled\n", intel_crtc->pipe));
959 reg = intel_crtc->pch_pll->pll_reg;
960 val = I915_READ(reg);
961 cur_state = !!(val & DPLL_VCO_ENABLE);
962 if (cur_state != state)
963 printf("PCH PLL state assertion failure (expected %s, current %s)\n",
964 state_string(state), state_string(cur_state));
966 #define assert_pch_pll_enabled(d, p) assert_pch_pll(d, p, true)
967 #define assert_pch_pll_disabled(d, p) assert_pch_pll(d, p, false)
969 static void assert_fdi_tx(struct drm_i915_private *dev_priv,
970 enum pipe pipe, bool state)
976 if (IS_HASWELL(dev_priv->dev)) {
977 /* On Haswell, DDI is used instead of FDI_TX_CTL */
978 reg = TRANS_DDI_FUNC_CTL(pipe);
979 val = I915_READ(reg);
980 cur_state = !!(val & TRANS_DDI_FUNC_ENABLE);
982 reg = FDI_TX_CTL(pipe);
983 val = I915_READ(reg);
984 cur_state = !!(val & FDI_TX_ENABLE);
986 if (cur_state != state)
987 printf("FDI TX state assertion failure (expected %s, current %s)\n",
988 state_string(state), state_string(cur_state));
990 #define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true)
991 #define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false)
993 static void assert_fdi_rx(struct drm_i915_private *dev_priv,
994 enum pipe pipe, bool state)
1000 if (IS_HASWELL(dev_priv->dev) && pipe > 0) {
1001 DRM_ERROR("Attempting to enable FDI_RX on Haswell pipe > 0\n");
1004 reg = FDI_RX_CTL(pipe);
1005 val = I915_READ(reg);
1006 cur_state = !!(val & FDI_RX_ENABLE);
1008 if (cur_state != state)
1009 printf("FDI RX state assertion failure (expected %s, current %s)\n",
1010 state_string(state), state_string(cur_state));
1012 #define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true)
1013 #define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false)
1015 static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
1021 /* ILK FDI PLL is always enabled */
1022 if (dev_priv->info->gen == 5)
1025 /* On Haswell, DDI ports are responsible for the FDI PLL setup */
1026 if (IS_HASWELL(dev_priv->dev))
1029 reg = FDI_TX_CTL(pipe);
1030 val = I915_READ(reg);
1031 if (!(val & FDI_TX_PLL_ENABLE))
1032 printf("FDI TX PLL assertion failure, should be active but is disabled\n");
1035 static void assert_fdi_rx_pll_enabled(struct drm_i915_private *dev_priv,
1041 if (IS_HASWELL(dev_priv->dev) && pipe > 0) {
1042 DRM_ERROR("Attempting to enable FDI on Haswell with pipe > 0\n");
1045 reg = FDI_RX_CTL(pipe);
1046 val = I915_READ(reg);
1047 if (!(val & FDI_RX_PLL_ENABLE))
1048 printf("FDI RX PLL assertion failure, should be active but is disabled\n");
1051 static void assert_panel_unlocked(struct drm_i915_private *dev_priv,
1054 int pp_reg, lvds_reg;
1056 enum pipe panel_pipe = PIPE_A;
1059 if (HAS_PCH_SPLIT(dev_priv->dev)) {
1060 pp_reg = PCH_PP_CONTROL;
1061 lvds_reg = PCH_LVDS;
1063 pp_reg = PP_CONTROL;
1067 val = I915_READ(pp_reg);
1068 if (!(val & PANEL_POWER_ON) ||
1069 ((val & PANEL_UNLOCK_REGS) == PANEL_UNLOCK_REGS))
1072 if (I915_READ(lvds_reg) & LVDS_PIPEB_SELECT)
1073 panel_pipe = PIPE_B;
1075 if (panel_pipe == pipe && locked)
1076 printf("panel assertion failure, pipe %c regs locked\n",
1080 void assert_pipe(struct drm_i915_private *dev_priv,
1081 enum pipe pipe, bool state)
1087 /* if we need the pipe A quirk it must be always on */
1088 if (pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE)
1091 reg = PIPECONF(pipe);
1092 val = I915_READ(reg);
1093 cur_state = !!(val & PIPECONF_ENABLE);
1094 if (cur_state != state)
1095 printf("pipe %c assertion failure (expected %s, current %s)\n",
1096 pipe_name(pipe), state_string(state), state_string(cur_state));
1099 static void assert_plane(struct drm_i915_private *dev_priv,
1100 enum plane plane, bool state)
1106 reg = DSPCNTR(plane);
1107 val = I915_READ(reg);
1108 cur_state = !!(val & DISPLAY_PLANE_ENABLE);
1109 if (cur_state != state)
1110 printf("plane %c assertion failure, (expected %s, current %s)\n",
1111 plane_name(plane), state_string(state), state_string(cur_state));
1114 #define assert_plane_enabled(d, p) assert_plane(d, p, true)
1115 #define assert_plane_disabled(d, p) assert_plane(d, p, false)
1117 static void assert_planes_disabled(struct drm_i915_private *dev_priv,
1124 /* Planes are fixed to pipes on ILK+ */
1125 if (HAS_PCH_SPLIT(dev_priv->dev)) {
1126 reg = DSPCNTR(pipe);
1127 val = I915_READ(reg);
1128 if ((val & DISPLAY_PLANE_ENABLE) != 0)
1129 printf("plane %c assertion failure, should be disabled but not\n",
1134 /* Need to check both planes against the pipe */
1135 for (i = 0; i < 2; i++) {
1137 val = I915_READ(reg);
1138 cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
1139 DISPPLANE_SEL_PIPE_SHIFT;
1140 if ((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe)
1141 printf("plane %c assertion failure, should be off on pipe %c but is still active\n",
1142 plane_name(i), pipe_name(pipe));
1146 static void assert_pch_refclk_enabled(struct drm_i915_private *dev_priv)
1151 if (HAS_PCH_LPT(dev_priv->dev)) {
1152 DRM_DEBUG_DRIVER("LPT does not has PCH refclk, skipping check\n");
1156 val = I915_READ(PCH_DREF_CONTROL);
1157 enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK |
1158 DREF_SUPERSPREAD_SOURCE_MASK));
1160 printf("PCH refclk assertion failure, should be active but is disabled\n");
1163 static void assert_transcoder_disabled(struct drm_i915_private *dev_priv,
1170 reg = TRANSCONF(pipe);
1171 val = I915_READ(reg);
1172 enabled = !!(val & TRANS_ENABLE);
1174 printf("transcoder assertion failed, should be off on pipe %c but is still active\n",
1178 static bool dp_pipe_enabled(struct drm_i915_private *dev_priv,
1179 enum pipe pipe, u32 port_sel, u32 val)
1181 if ((val & DP_PORT_EN) == 0)
1184 if (HAS_PCH_CPT(dev_priv->dev)) {
1185 u32 trans_dp_ctl_reg = TRANS_DP_CTL(pipe);
1186 u32 trans_dp_ctl = I915_READ(trans_dp_ctl_reg);
1187 if ((trans_dp_ctl & TRANS_DP_PORT_SEL_MASK) != port_sel)
1190 if ((val & DP_PIPE_MASK) != (pipe << 30))
1196 static bool hdmi_pipe_enabled(struct drm_i915_private *dev_priv,
1197 enum pipe pipe, u32 val)
1199 if ((val & PORT_ENABLE) == 0)
1202 if (HAS_PCH_CPT(dev_priv->dev)) {
1203 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1206 if ((val & TRANSCODER_MASK) != TRANSCODER(pipe))
1212 static bool lvds_pipe_enabled(struct drm_i915_private *dev_priv,
1213 enum pipe pipe, u32 val)
1215 if ((val & LVDS_PORT_EN) == 0)
1218 if (HAS_PCH_CPT(dev_priv->dev)) {
1219 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1222 if ((val & LVDS_PIPE_MASK) != LVDS_PIPE(pipe))
1228 static bool adpa_pipe_enabled(struct drm_i915_private *dev_priv,
1229 enum pipe pipe, u32 val)
1231 if ((val & ADPA_DAC_ENABLE) == 0)
1233 if (HAS_PCH_CPT(dev_priv->dev)) {
1234 if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
1237 if ((val & ADPA_PIPE_SELECT_MASK) != ADPA_PIPE_SELECT(pipe))
1243 static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
1244 enum pipe pipe, int reg, u32 port_sel)
1246 u32 val = I915_READ(reg);
1247 if (dp_pipe_enabled(dev_priv, pipe, port_sel, val))
1248 printf("PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
1249 reg, pipe_name(pipe));
1252 static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
1253 enum pipe pipe, int reg)
1255 u32 val = I915_READ(reg);
1256 if (hdmi_pipe_enabled(dev_priv, val, pipe))
1257 printf("PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
1258 reg, pipe_name(pipe));
1261 static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
1267 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
1268 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
1269 assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
1272 val = I915_READ(reg);
1273 if (adpa_pipe_enabled(dev_priv, val, pipe))
1274 printf("PCH VGA enabled on transcoder %c, should be disabled\n",
1278 val = I915_READ(reg);
1279 if (lvds_pipe_enabled(dev_priv, val, pipe))
1280 printf("PCH LVDS enabled on transcoder %c, should be disabled\n",
1283 assert_pch_hdmi_disabled(dev_priv, pipe, HDMIB);
1284 assert_pch_hdmi_disabled(dev_priv, pipe, HDMIC);
1285 assert_pch_hdmi_disabled(dev_priv, pipe, HDMID);
1289 * intel_enable_pll - enable a PLL
1290 * @dev_priv: i915 private structure
1291 * @pipe: pipe PLL to enable
1293 * Enable @pipe's PLL so we can start pumping pixels from a plane. Check to
1294 * make sure the PLL reg is writable first though, since the panel write
1295 * protect mechanism may be enabled.
1297 * Note! This is for pre-ILK only.
1299 static void intel_enable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1304 /* No really, not for ILK+ */
1305 KASSERT(dev_priv->info->gen < 5, ("Wrong device gen"));
1307 /* PLL is protected by panel, make sure we can write it */
1308 if (IS_MOBILE(dev_priv->dev) && !IS_I830(dev_priv->dev))
1309 assert_panel_unlocked(dev_priv, pipe);
1312 val = I915_READ(reg);
1313 val |= DPLL_VCO_ENABLE;
1315 /* We do this three times for luck */
1316 I915_WRITE(reg, val);
1318 DELAY(150); /* wait for warmup */
1319 I915_WRITE(reg, val);
1321 DELAY(150); /* wait for warmup */
1322 I915_WRITE(reg, val);
1324 DELAY(150); /* wait for warmup */
1328 * intel_disable_pll - disable a PLL
1329 * @dev_priv: i915 private structure
1330 * @pipe: pipe PLL to disable
1332 * Disable the PLL for @pipe, making sure the pipe is off first.
1334 * Note! This is for pre-ILK only.
1336 static void intel_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1341 /* Don't disable pipe A or pipe A PLLs if needed */
1342 if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
1345 /* Make sure the pipe isn't still relying on us */
1346 assert_pipe_disabled(dev_priv, pipe);
1349 val = I915_READ(reg);
1350 val &= ~DPLL_VCO_ENABLE;
1351 I915_WRITE(reg, val);
1357 intel_sbi_write(struct drm_i915_private *dev_priv, u16 reg, u32 value)
1360 mtx_lock(&dev_priv->dpio_lock);
1361 if (wait_for((I915_READ(SBI_CTL_STAT) & SBI_READY) == 0, 100)) {
1362 DRM_ERROR("timeout waiting for SBI to become ready\n");
1366 I915_WRITE(SBI_ADDR, (reg << 16));
1367 I915_WRITE(SBI_DATA, value);
1368 I915_WRITE(SBI_CTL_STAT,
1372 if (wait_for((I915_READ(SBI_CTL_STAT) & (SBI_READY | SBI_RESPONSE_SUCCESS)) == 0,
1374 DRM_ERROR("timeout waiting for SBI to complete write transaction\n");
1379 mtx_unlock(&dev_priv->dpio_lock);
1383 intel_sbi_read(struct drm_i915_private *dev_priv, u16 reg)
1388 mtx_lock(&dev_priv->dpio_lock);
1389 if (wait_for((I915_READ(SBI_CTL_STAT) & SBI_READY) == 0, 100)) {
1390 DRM_ERROR("timeout waiting for SBI to become ready\n");
1394 I915_WRITE(SBI_ADDR, (reg << 16));
1395 I915_WRITE(SBI_CTL_STAT,
1399 if (wait_for((I915_READ(SBI_CTL_STAT) & (SBI_READY | SBI_RESPONSE_SUCCESS)) == 0,
1401 DRM_ERROR("timeout waiting for SBI to complete read transaction\n");
1405 value = I915_READ(SBI_DATA);
1408 mtx_unlock(&dev_priv->dpio_lock);
1413 * intel_enable_pch_pll - enable PCH PLL
1414 * @dev_priv: i915 private structure
1415 * @pipe: pipe PLL to enable
1417 * The PCH PLL needs to be enabled before the PCH transcoder, since it
1418 * drives the transcoder clock.
1420 static void intel_enable_pch_pll(struct intel_crtc *intel_crtc)
1422 struct drm_i915_private *dev_priv = intel_crtc->base.dev->dev_private;
1423 struct intel_pch_pll *pll;
1427 /* PCH PLLs only available on ILK, SNB and IVB */
1428 KASSERT(dev_priv->info->gen >= 5, ("Wrong device gen"));
1429 pll = intel_crtc->pch_pll;
1433 if (pll->refcount == 0) {
1434 DRM_DEBUG_KMS("pll->refcount == 0\n");
1438 DRM_DEBUG_KMS("enable PCH PLL %x (active %d, on? %d)for crtc %d\n",
1439 pll->pll_reg, pll->active, pll->on,
1440 intel_crtc->base.base.id);
1442 /* PCH refclock must be enabled first */
1443 assert_pch_refclk_enabled(dev_priv);
1445 if (pll->active++ && pll->on) {
1446 assert_pch_pll_enabled(dev_priv, intel_crtc);
1450 DRM_DEBUG_KMS("enabling PCH PLL %x\n", pll->pll_reg);
1453 val = I915_READ(reg);
1454 val |= DPLL_VCO_ENABLE;
1455 I915_WRITE(reg, val);
1462 static void intel_disable_pch_pll(struct intel_crtc *intel_crtc)
1464 struct drm_i915_private *dev_priv = intel_crtc->base.dev->dev_private;
1465 struct intel_pch_pll *pll = intel_crtc->pch_pll;
1469 /* PCH only available on ILK+ */
1470 KASSERT(dev_priv->info->gen >= 5, ("Wrong device gen"));
1474 if (pll->refcount == 0) {
1475 DRM_DEBUG_KMS("pll->refcount == 0\n");
1479 DRM_DEBUG_KMS("disable PCH PLL %x (active %d, on? %d) for crtc %d\n",
1480 pll->pll_reg, pll->active, pll->on,
1481 intel_crtc->base.base.id);
1483 if (pll->active == 0) {
1484 DRM_DEBUG_KMS("pll->active == 0\n");
1485 assert_pch_pll_disabled(dev_priv, intel_crtc);
1489 if (--pll->active) {
1490 assert_pch_pll_enabled(dev_priv, intel_crtc);
1494 DRM_DEBUG_KMS("disabling PCH PLL %x\n", pll->pll_reg);
1496 /* Make sure transcoder isn't still depending on us */
1497 assert_transcoder_disabled(dev_priv, intel_crtc->pipe);
1500 val = I915_READ(reg);
1501 val &= ~DPLL_VCO_ENABLE;
1502 I915_WRITE(reg, val);
1509 static void intel_enable_transcoder(struct drm_i915_private *dev_priv,
1513 u32 val, pipeconf_val;
1514 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
1516 /* PCH only available on ILK+ */
1517 KASSERT(dev_priv->info->gen >= 5, ("Wrong device gen"));
1519 /* Make sure PCH DPLL is enabled */
1520 assert_pch_pll_enabled(dev_priv, to_intel_crtc(crtc));
1522 /* FDI must be feeding us bits for PCH ports */
1523 assert_fdi_tx_enabled(dev_priv, pipe);
1524 assert_fdi_rx_enabled(dev_priv, pipe);
1526 if (IS_HASWELL(dev_priv->dev) && pipe > 0) {
1527 DRM_ERROR("Attempting to enable transcoder on Haswell with pipe > 0\n");
1530 reg = TRANSCONF(pipe);
1531 val = I915_READ(reg);
1532 pipeconf_val = I915_READ(PIPECONF(pipe));
1533 if (HAS_PCH_IBX(dev_priv->dev)) {
1535 * make the BPC in transcoder be consistent with
1536 * that in pipeconf reg.
1538 val &= ~PIPE_BPC_MASK;
1539 val |= pipeconf_val & PIPE_BPC_MASK;
1542 val &= ~TRANS_INTERLACE_MASK;
1543 if ((pipeconf_val & PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK)
1544 if (HAS_PCH_IBX(dev_priv->dev) &&
1545 intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO))
1546 val |= TRANS_LEGACY_INTERLACED_ILK;
1548 val |= TRANS_INTERLACED;
1550 val |= TRANS_PROGRESSIVE;
1552 I915_WRITE(reg, val | TRANS_ENABLE);
1553 if (_intel_wait_for(dev_priv->dev, I915_READ(reg) & TRANS_STATE_ENABLE,
1555 DRM_ERROR("failed to enable transcoder %d\n", pipe);
1558 static void intel_disable_transcoder(struct drm_i915_private *dev_priv,
1564 /* FDI relies on the transcoder */
1565 assert_fdi_tx_disabled(dev_priv, pipe);
1566 assert_fdi_rx_disabled(dev_priv, pipe);
1568 /* Ports must be off as well */
1569 assert_pch_ports_disabled(dev_priv, pipe);
1571 reg = TRANSCONF(pipe);
1572 val = I915_READ(reg);
1573 val &= ~TRANS_ENABLE;
1574 I915_WRITE(reg, val);
1575 /* wait for PCH transcoder off, transcoder state */
1576 if (_intel_wait_for(dev_priv->dev,
1577 (I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50,
1579 DRM_ERROR("failed to disable transcoder %d\n", pipe);
1583 * intel_enable_pipe - enable a pipe, asserting requirements
1584 * @dev_priv: i915 private structure
1585 * @pipe: pipe to enable
1586 * @pch_port: on ILK+, is this pipe driving a PCH port or not
1588 * Enable @pipe, making sure that various hardware specific requirements
1589 * are met, if applicable, e.g. PLL enabled, LVDS pairs enabled, etc.
1591 * @pipe should be %PIPE_A or %PIPE_B.
1593 * Will wait until the pipe is actually running (i.e. first vblank) before
1596 static void intel_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe,
1603 * A pipe without a PLL won't actually be able to drive bits from
1604 * a plane. On ILK+ the pipe PLLs are integrated, so we don't
1607 if (!HAS_PCH_SPLIT(dev_priv->dev))
1608 assert_pll_enabled(dev_priv, pipe);
1611 /* if driving the PCH, we need FDI enabled */
1612 assert_fdi_rx_pll_enabled(dev_priv, pipe);
1613 assert_fdi_tx_pll_enabled(dev_priv, pipe);
1615 /* FIXME: assert CPU port conditions for SNB+ */
1618 reg = PIPECONF(pipe);
1619 val = I915_READ(reg);
1620 if (val & PIPECONF_ENABLE)
1623 I915_WRITE(reg, val | PIPECONF_ENABLE);
1624 intel_wait_for_vblank(dev_priv->dev, pipe);
1628 * intel_disable_pipe - disable a pipe, asserting requirements
1629 * @dev_priv: i915 private structure
1630 * @pipe: pipe to disable
1632 * Disable @pipe, making sure that various hardware specific requirements
1633 * are met, if applicable, e.g. plane disabled, panel fitter off, etc.
1635 * @pipe should be %PIPE_A or %PIPE_B.
1637 * Will wait until the pipe has shut down before returning.
1639 static void intel_disable_pipe(struct drm_i915_private *dev_priv,
1646 * Make sure planes won't keep trying to pump pixels to us,
1647 * or we might hang the display.
1649 assert_planes_disabled(dev_priv, pipe);
1651 /* Don't disable pipe A or pipe A PLLs if needed */
1652 if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
1655 reg = PIPECONF(pipe);
1656 val = I915_READ(reg);
1657 if ((val & PIPECONF_ENABLE) == 0)
1660 I915_WRITE(reg, val & ~PIPECONF_ENABLE);
1661 intel_wait_for_pipe_off(dev_priv->dev, pipe);
1665 * Plane regs are double buffered, going from enabled->disabled needs a
1666 * trigger in order to latch. The display address reg provides this.
1668 void intel_flush_display_plane(struct drm_i915_private *dev_priv,
1671 I915_WRITE(DSPADDR(plane), I915_READ(DSPADDR(plane)));
1672 I915_WRITE(DSPSURF(plane), I915_READ(DSPSURF(plane)));
1676 * intel_enable_plane - enable a display plane on a given pipe
1677 * @dev_priv: i915 private structure
1678 * @plane: plane to enable
1679 * @pipe: pipe being fed
1681 * Enable @plane on @pipe, making sure that @pipe is running first.
1683 static void intel_enable_plane(struct drm_i915_private *dev_priv,
1684 enum plane plane, enum pipe pipe)
1689 /* If the pipe isn't enabled, we can't pump pixels and may hang */
1690 assert_pipe_enabled(dev_priv, pipe);
1692 reg = DSPCNTR(plane);
1693 val = I915_READ(reg);
1694 if (val & DISPLAY_PLANE_ENABLE)
1697 I915_WRITE(reg, val | DISPLAY_PLANE_ENABLE);
1698 intel_flush_display_plane(dev_priv, plane);
1699 intel_wait_for_vblank(dev_priv->dev, pipe);
1703 * intel_disable_plane - disable a display plane
1704 * @dev_priv: i915 private structure
1705 * @plane: plane to disable
1706 * @pipe: pipe consuming the data
1708 * Disable @plane; should be an independent operation.
1710 static void intel_disable_plane(struct drm_i915_private *dev_priv,
1711 enum plane plane, enum pipe pipe)
1716 reg = DSPCNTR(plane);
1717 val = I915_READ(reg);
1718 if ((val & DISPLAY_PLANE_ENABLE) == 0)
1721 I915_WRITE(reg, val & ~DISPLAY_PLANE_ENABLE);
1722 intel_flush_display_plane(dev_priv, plane);
1723 intel_wait_for_vblank(dev_priv->dev, pipe);
1726 static void disable_pch_dp(struct drm_i915_private *dev_priv,
1727 enum pipe pipe, int reg, u32 port_sel)
1729 u32 val = I915_READ(reg);
1730 if (dp_pipe_enabled(dev_priv, pipe, port_sel, val)) {
1731 DRM_DEBUG_KMS("Disabling pch dp %x on pipe %d\n", reg, pipe);
1732 I915_WRITE(reg, val & ~DP_PORT_EN);
1736 static void disable_pch_hdmi(struct drm_i915_private *dev_priv,
1737 enum pipe pipe, int reg)
1739 u32 val = I915_READ(reg);
1740 if (hdmi_pipe_enabled(dev_priv, val, pipe)) {
1741 DRM_DEBUG_KMS("Disabling pch HDMI %x on pipe %d\n",
1743 I915_WRITE(reg, val & ~PORT_ENABLE);
1747 /* Disable any ports connected to this transcoder */
1748 static void intel_disable_pch_ports(struct drm_i915_private *dev_priv,
1753 val = I915_READ(PCH_PP_CONTROL);
1754 I915_WRITE(PCH_PP_CONTROL, val | PANEL_UNLOCK_REGS);
1756 disable_pch_dp(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
1757 disable_pch_dp(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
1758 disable_pch_dp(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
1761 val = I915_READ(reg);
1762 if (adpa_pipe_enabled(dev_priv, val, pipe))
1763 I915_WRITE(reg, val & ~ADPA_DAC_ENABLE);
1766 val = I915_READ(reg);
1767 if (lvds_pipe_enabled(dev_priv, val, pipe)) {
1768 DRM_DEBUG_KMS("disable lvds on pipe %d val 0x%08x\n", pipe, val);
1769 I915_WRITE(reg, val & ~LVDS_PORT_EN);
1774 disable_pch_hdmi(dev_priv, pipe, HDMIB);
1775 disable_pch_hdmi(dev_priv, pipe, HDMIC);
1776 disable_pch_hdmi(dev_priv, pipe, HDMID);
1780 intel_pin_and_fence_fb_obj(struct drm_device *dev,
1781 struct drm_i915_gem_object *obj,
1782 struct intel_ring_buffer *pipelined)
1784 struct drm_i915_private *dev_priv = dev->dev_private;
1788 alignment = 0; /* shut gcc */
1789 switch (obj->tiling_mode) {
1790 case I915_TILING_NONE:
1791 if (IS_BROADWATER(dev) || IS_CRESTLINE(dev))
1792 alignment = 128 * 1024;
1793 else if (INTEL_INFO(dev)->gen >= 4)
1794 alignment = 4 * 1024;
1796 alignment = 64 * 1024;
1799 /* pin() will align the object as required by fence */
1803 /* FIXME: Is this true? */
1804 DRM_ERROR("Y tiled not allowed for scan out buffers\n");
1807 KASSERT(0, ("Wrong tiling for fb obj"));
1810 dev_priv->mm.interruptible = false;
1811 ret = i915_gem_object_pin_to_display_plane(obj, alignment, pipelined);
1813 goto err_interruptible;
1815 /* Install a fence for tiled scan-out. Pre-i965 always needs a
1816 * fence, whereas 965+ only requires a fence if using
1817 * framebuffer compression. For simplicity, we always install
1818 * a fence as the cost is not that onerous.
1820 ret = i915_gem_object_get_fence(obj);
1824 i915_gem_object_pin_fence(obj);
1826 dev_priv->mm.interruptible = true;
1830 i915_gem_object_unpin_from_display_plane(obj);
1832 dev_priv->mm.interruptible = true;
1836 void intel_unpin_fb_obj(struct drm_i915_gem_object *obj)
1838 i915_gem_object_unpin_fence(obj);
1839 i915_gem_object_unpin_from_display_plane(obj);
1842 static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
1845 struct drm_device *dev = crtc->dev;
1846 struct drm_i915_private *dev_priv = dev->dev_private;
1847 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1848 struct intel_framebuffer *intel_fb;
1849 struct drm_i915_gem_object *obj;
1850 int plane = intel_crtc->plane;
1851 unsigned long Start, Offset;
1860 DRM_ERROR("Can't update plane %d in SAREA\n", plane);
1864 intel_fb = to_intel_framebuffer(fb);
1865 obj = intel_fb->obj;
1867 reg = DSPCNTR(plane);
1868 dspcntr = I915_READ(reg);
1869 /* Mask out pixel format bits in case we change it */
1870 dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
1871 switch (fb->bits_per_pixel) {
1873 dspcntr |= DISPPLANE_8BPP;
1876 if (fb->depth == 15)
1877 dspcntr |= DISPPLANE_BGRX555;
1879 dspcntr |= DISPPLANE_BGRX565;
1883 dspcntr |= DISPPLANE_BGRX888;
1886 DRM_ERROR("Unknown color depth %d\n", fb->bits_per_pixel);
1889 if (INTEL_INFO(dev)->gen >= 4) {
1890 if (obj->tiling_mode != I915_TILING_NONE)
1891 dspcntr |= DISPPLANE_TILED;
1893 dspcntr &= ~DISPPLANE_TILED;
1896 I915_WRITE(reg, dspcntr);
1898 Start = obj->gtt_offset;
1899 Offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
1901 DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
1902 Start, Offset, x, y, fb->pitches[0]);
1903 I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
1904 if (INTEL_INFO(dev)->gen >= 4) {
1905 I915_MODIFY_DISPBASE(DSPSURF(plane), Start);
1906 I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
1907 I915_WRITE(DSPADDR(plane), Offset);
1909 I915_WRITE(DSPADDR(plane), Start + Offset);
1915 static int ironlake_update_plane(struct drm_crtc *crtc,
1916 struct drm_framebuffer *fb, int x, int y)
1918 struct drm_device *dev = crtc->dev;
1919 struct drm_i915_private *dev_priv = dev->dev_private;
1920 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
1921 struct intel_framebuffer *intel_fb;
1922 struct drm_i915_gem_object *obj;
1923 int plane = intel_crtc->plane;
1924 unsigned long Start, Offset;
1934 DRM_ERROR("Can't update plane %d in SAREA\n", plane);
1938 intel_fb = to_intel_framebuffer(fb);
1939 obj = intel_fb->obj;
1941 reg = DSPCNTR(plane);
1942 dspcntr = I915_READ(reg);
1943 /* Mask out pixel format bits in case we change it */
1944 dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
1945 switch (fb->bits_per_pixel) {
1947 dspcntr |= DISPPLANE_8BPP;
1950 if (fb->depth != 16) {
1951 DRM_ERROR("bpp 16, depth %d\n", fb->depth);
1955 dspcntr |= DISPPLANE_BGRX565;
1959 if (fb->depth == 24)
1960 dspcntr |= DISPPLANE_BGRX888;
1961 else if (fb->depth == 30)
1962 dspcntr |= DISPPLANE_BGRX101010;
1964 DRM_ERROR("bpp %d depth %d\n", fb->bits_per_pixel,
1970 DRM_ERROR("Unknown color depth %d\n", fb->bits_per_pixel);
1974 if (obj->tiling_mode != I915_TILING_NONE)
1975 dspcntr |= DISPPLANE_TILED;
1977 dspcntr &= ~DISPPLANE_TILED;
1980 dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
1982 I915_WRITE(reg, dspcntr);
1984 Start = obj->gtt_offset;
1985 Offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
1987 DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
1988 Start, Offset, x, y, fb->pitches[0]);
1989 I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
1990 I915_MODIFY_DISPBASE(DSPSURF(plane), Start);
1991 I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
1992 I915_WRITE(DSPADDR(plane), Offset);
1998 /* Assume fb object is pinned & idle & fenced and just update base pointers */
2000 intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
2001 int x, int y, enum mode_set_atomic state)
2003 struct drm_device *dev = crtc->dev;
2004 struct drm_i915_private *dev_priv = dev->dev_private;
2006 if (dev_priv->display.disable_fbc)
2007 dev_priv->display.disable_fbc(dev);
2008 intel_increase_pllclock(crtc);
2010 return dev_priv->display.update_plane(crtc, fb, x, y);
2014 intel_finish_fb(struct drm_framebuffer *old_fb)
2016 struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj;
2017 struct drm_device *dev = obj->base.dev;
2018 struct drm_i915_private *dev_priv = dev->dev_private;
2019 bool was_interruptible = dev_priv->mm.interruptible;
2022 mtx_lock(&dev->event_lock);
2023 while (!atomic_load_acq_int(&dev_priv->mm.wedged) &&
2024 atomic_load_acq_int(&obj->pending_flip) != 0) {
2025 msleep(&obj->pending_flip, &dev->event_lock,
2028 mtx_unlock(&dev->event_lock);
2030 /* Big Hammer, we also need to ensure that any pending
2031 * MI_WAIT_FOR_EVENT inside a user batch buffer on the
2032 * current scanout is retired before unpinning the old
2035 * This should only fail upon a hung GPU, in which case we
2036 * can safely continue.
2038 dev_priv->mm.interruptible = false;
2039 ret = i915_gem_object_finish_gpu(obj);
2040 dev_priv->mm.interruptible = was_interruptible;
2046 intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
2047 struct drm_framebuffer *old_fb)
2049 struct drm_device *dev = crtc->dev;
2050 struct drm_i915_private *dev_priv = dev->dev_private;
2051 struct drm_i915_master_private *master_priv;
2052 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2057 DRM_ERROR("No FB bound\n");
2061 if(intel_crtc->plane > dev_priv->num_pipe) {
2062 DRM_ERROR("no plane for crtc: plane %d, num_pipes %d\n",
2064 dev_priv->num_pipe);
2069 ret = intel_pin_and_fence_fb_obj(dev,
2070 to_intel_framebuffer(crtc->fb)->obj,
2074 DRM_ERROR("pin & fence failed\n");
2079 intel_finish_fb(old_fb);
2081 ret = dev_priv->display.update_plane(crtc, crtc->fb, x, y);
2083 intel_unpin_fb_obj(to_intel_framebuffer(crtc->fb)->obj);
2085 DRM_ERROR("failed to update base address\n");
2090 intel_wait_for_vblank(dev, intel_crtc->pipe);
2091 intel_unpin_fb_obj(to_intel_framebuffer(old_fb)->obj);
2094 intel_update_fbc(dev);
2097 if (!dev->primary->master)
2100 master_priv = dev->primary->master->driver_priv;
2101 if (!master_priv->sarea_priv)
2104 if (intel_crtc->pipe) {
2105 master_priv->sarea_priv->pipeB_x = x;
2106 master_priv->sarea_priv->pipeB_y = y;
2108 master_priv->sarea_priv->pipeA_x = x;
2109 master_priv->sarea_priv->pipeA_y = y;
2115 static void ironlake_set_pll_edp(struct drm_crtc *crtc, int clock)
2117 struct drm_device *dev = crtc->dev;
2118 struct drm_i915_private *dev_priv = dev->dev_private;
2121 DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", clock);
2122 dpa_ctl = I915_READ(DP_A);
2123 dpa_ctl &= ~DP_PLL_FREQ_MASK;
2125 if (clock < 200000) {
2127 dpa_ctl |= DP_PLL_FREQ_160MHZ;
2128 /* workaround for 160Mhz:
2129 1) program 0x4600c bits 15:0 = 0x8124
2130 2) program 0x46010 bit 0 = 1
2131 3) program 0x46034 bit 24 = 1
2132 4) program 0x64000 bit 14 = 1
2134 temp = I915_READ(0x4600c);
2136 I915_WRITE(0x4600c, temp | 0x8124);
2138 temp = I915_READ(0x46010);
2139 I915_WRITE(0x46010, temp | 1);
2141 temp = I915_READ(0x46034);
2142 I915_WRITE(0x46034, temp | (1 << 24));
2144 dpa_ctl |= DP_PLL_FREQ_270MHZ;
2146 I915_WRITE(DP_A, dpa_ctl);
2152 static void intel_fdi_normal_train(struct drm_crtc *crtc)
2154 struct drm_device *dev = crtc->dev;
2155 struct drm_i915_private *dev_priv = dev->dev_private;
2156 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2157 int pipe = intel_crtc->pipe;
2160 /* enable normal train */
2161 reg = FDI_TX_CTL(pipe);
2162 temp = I915_READ(reg);
2163 if (IS_IVYBRIDGE(dev)) {
2164 temp &= ~FDI_LINK_TRAIN_NONE_IVB;
2165 temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE;
2167 temp &= ~FDI_LINK_TRAIN_NONE;
2168 temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
2170 I915_WRITE(reg, temp);
2172 reg = FDI_RX_CTL(pipe);
2173 temp = I915_READ(reg);
2174 if (HAS_PCH_CPT(dev)) {
2175 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2176 temp |= FDI_LINK_TRAIN_NORMAL_CPT;
2178 temp &= ~FDI_LINK_TRAIN_NONE;
2179 temp |= FDI_LINK_TRAIN_NONE;
2181 I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
2183 /* wait one idle pattern time */
2187 /* IVB wants error correction enabled */
2188 if (IS_IVYBRIDGE(dev))
2189 I915_WRITE(reg, I915_READ(reg) | FDI_FS_ERRC_ENABLE |
2190 FDI_FE_ERRC_ENABLE);
2193 static void cpt_phase_pointer_enable(struct drm_device *dev, int pipe)
2195 struct drm_i915_private *dev_priv = dev->dev_private;
2196 u32 flags = I915_READ(SOUTH_CHICKEN1);
2198 flags |= FDI_PHASE_SYNC_OVR(pipe);
2199 I915_WRITE(SOUTH_CHICKEN1, flags); /* once to unlock... */
2200 flags |= FDI_PHASE_SYNC_EN(pipe);
2201 I915_WRITE(SOUTH_CHICKEN1, flags); /* then again to enable */
2202 POSTING_READ(SOUTH_CHICKEN1);
2205 /* The FDI link training functions for ILK/Ibexpeak. */
2206 static void ironlake_fdi_link_train(struct drm_crtc *crtc)
2208 struct drm_device *dev = crtc->dev;
2209 struct drm_i915_private *dev_priv = dev->dev_private;
2210 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2211 int pipe = intel_crtc->pipe;
2212 int plane = intel_crtc->plane;
2213 u32 reg, temp, tries;
2215 /* FDI needs bits from pipe & plane first */
2216 assert_pipe_enabled(dev_priv, pipe);
2217 assert_plane_enabled(dev_priv, plane);
2219 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
2221 reg = FDI_RX_IMR(pipe);
2222 temp = I915_READ(reg);
2223 temp &= ~FDI_RX_SYMBOL_LOCK;
2224 temp &= ~FDI_RX_BIT_LOCK;
2225 I915_WRITE(reg, temp);
2229 /* enable CPU FDI TX and PCH FDI RX */
2230 reg = FDI_TX_CTL(pipe);
2231 temp = I915_READ(reg);
2233 temp |= (intel_crtc->fdi_lanes - 1) << 19;
2234 temp &= ~FDI_LINK_TRAIN_NONE;
2235 temp |= FDI_LINK_TRAIN_PATTERN_1;
2236 I915_WRITE(reg, temp | FDI_TX_ENABLE);
2238 reg = FDI_RX_CTL(pipe);
2239 temp = I915_READ(reg);
2240 temp &= ~FDI_LINK_TRAIN_NONE;
2241 temp |= FDI_LINK_TRAIN_PATTERN_1;
2242 I915_WRITE(reg, temp | FDI_RX_ENABLE);
2247 /* Ironlake workaround, enable clock pointer after FDI enable*/
2248 if (HAS_PCH_IBX(dev)) {
2249 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
2250 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR |
2251 FDI_RX_PHASE_SYNC_POINTER_EN);
2254 reg = FDI_RX_IIR(pipe);
2255 for (tries = 0; tries < 5; tries++) {
2256 temp = I915_READ(reg);
2257 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2259 if ((temp & FDI_RX_BIT_LOCK)) {
2260 DRM_DEBUG_KMS("FDI train 1 done.\n");
2261 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
2266 DRM_ERROR("FDI train 1 fail!\n");
2269 reg = FDI_TX_CTL(pipe);
2270 temp = I915_READ(reg);
2271 temp &= ~FDI_LINK_TRAIN_NONE;
2272 temp |= FDI_LINK_TRAIN_PATTERN_2;
2273 I915_WRITE(reg, temp);
2275 reg = FDI_RX_CTL(pipe);
2276 temp = I915_READ(reg);
2277 temp &= ~FDI_LINK_TRAIN_NONE;
2278 temp |= FDI_LINK_TRAIN_PATTERN_2;
2279 I915_WRITE(reg, temp);
2284 reg = FDI_RX_IIR(pipe);
2285 for (tries = 0; tries < 5; tries++) {
2286 temp = I915_READ(reg);
2287 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2289 if (temp & FDI_RX_SYMBOL_LOCK) {
2290 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
2291 DRM_DEBUG_KMS("FDI train 2 done.\n");
2296 DRM_ERROR("FDI train 2 fail!\n");
2298 DRM_DEBUG_KMS("FDI train done\n");
2302 static const int snb_b_fdi_train_param[] = {
2303 FDI_LINK_TRAIN_400MV_0DB_SNB_B,
2304 FDI_LINK_TRAIN_400MV_6DB_SNB_B,
2305 FDI_LINK_TRAIN_600MV_3_5DB_SNB_B,
2306 FDI_LINK_TRAIN_800MV_0DB_SNB_B,
2309 /* The FDI link training functions for SNB/Cougarpoint. */
2310 static void gen6_fdi_link_train(struct drm_crtc *crtc)
2312 struct drm_device *dev = crtc->dev;
2313 struct drm_i915_private *dev_priv = dev->dev_private;
2314 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2315 int pipe = intel_crtc->pipe;
2316 u32 reg, temp, i, retry;
2318 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
2320 reg = FDI_RX_IMR(pipe);
2321 temp = I915_READ(reg);
2322 temp &= ~FDI_RX_SYMBOL_LOCK;
2323 temp &= ~FDI_RX_BIT_LOCK;
2324 I915_WRITE(reg, temp);
2329 /* enable CPU FDI TX and PCH FDI RX */
2330 reg = FDI_TX_CTL(pipe);
2331 temp = I915_READ(reg);
2333 temp |= (intel_crtc->fdi_lanes - 1) << 19;
2334 temp &= ~FDI_LINK_TRAIN_NONE;
2335 temp |= FDI_LINK_TRAIN_PATTERN_1;
2336 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2338 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2339 I915_WRITE(reg, temp | FDI_TX_ENABLE);
2341 reg = FDI_RX_CTL(pipe);
2342 temp = I915_READ(reg);
2343 if (HAS_PCH_CPT(dev)) {
2344 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2345 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
2347 temp &= ~FDI_LINK_TRAIN_NONE;
2348 temp |= FDI_LINK_TRAIN_PATTERN_1;
2350 I915_WRITE(reg, temp | FDI_RX_ENABLE);
2355 if (HAS_PCH_CPT(dev))
2356 cpt_phase_pointer_enable(dev, pipe);
2358 for (i = 0; i < 4; i++) {
2359 reg = FDI_TX_CTL(pipe);
2360 temp = I915_READ(reg);
2361 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2362 temp |= snb_b_fdi_train_param[i];
2363 I915_WRITE(reg, temp);
2368 for (retry = 0; retry < 5; retry++) {
2369 reg = FDI_RX_IIR(pipe);
2370 temp = I915_READ(reg);
2371 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2373 if (temp & FDI_RX_BIT_LOCK) {
2374 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
2375 DRM_DEBUG_KMS("FDI train 1 done.\n");
2384 DRM_ERROR("FDI train 1 fail!\n");
2387 reg = FDI_TX_CTL(pipe);
2388 temp = I915_READ(reg);
2389 temp &= ~FDI_LINK_TRAIN_NONE;
2390 temp |= FDI_LINK_TRAIN_PATTERN_2;
2392 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2394 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2396 I915_WRITE(reg, temp);
2398 reg = FDI_RX_CTL(pipe);
2399 temp = I915_READ(reg);
2400 if (HAS_PCH_CPT(dev)) {
2401 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2402 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
2404 temp &= ~FDI_LINK_TRAIN_NONE;
2405 temp |= FDI_LINK_TRAIN_PATTERN_2;
2407 I915_WRITE(reg, temp);
2412 for (i = 0; i < 4; i++) {
2413 reg = FDI_TX_CTL(pipe);
2414 temp = I915_READ(reg);
2415 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2416 temp |= snb_b_fdi_train_param[i];
2417 I915_WRITE(reg, temp);
2422 for (retry = 0; retry < 5; retry++) {
2423 reg = FDI_RX_IIR(pipe);
2424 temp = I915_READ(reg);
2425 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2427 if (temp & FDI_RX_SYMBOL_LOCK) {
2428 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
2429 DRM_DEBUG_KMS("FDI train 2 done.\n");
2438 DRM_ERROR("FDI train 2 fail!\n");
2440 DRM_DEBUG_KMS("FDI train done.\n");
2443 /* Manual link training for Ivy Bridge A0 parts */
2444 static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
2446 struct drm_device *dev = crtc->dev;
2447 struct drm_i915_private *dev_priv = dev->dev_private;
2448 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2449 int pipe = intel_crtc->pipe;
2452 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
2454 reg = FDI_RX_IMR(pipe);
2455 temp = I915_READ(reg);
2456 temp &= ~FDI_RX_SYMBOL_LOCK;
2457 temp &= ~FDI_RX_BIT_LOCK;
2458 I915_WRITE(reg, temp);
2463 /* enable CPU FDI TX and PCH FDI RX */
2464 reg = FDI_TX_CTL(pipe);
2465 temp = I915_READ(reg);
2467 temp |= (intel_crtc->fdi_lanes - 1) << 19;
2468 temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
2469 temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
2470 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2471 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2472 temp |= FDI_COMPOSITE_SYNC;
2473 I915_WRITE(reg, temp | FDI_TX_ENABLE);
2475 reg = FDI_RX_CTL(pipe);
2476 temp = I915_READ(reg);
2477 temp &= ~FDI_LINK_TRAIN_AUTO;
2478 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2479 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
2480 temp |= FDI_COMPOSITE_SYNC;
2481 I915_WRITE(reg, temp | FDI_RX_ENABLE);
2486 for (i = 0; i < 4; i++) {
2487 reg = FDI_TX_CTL(pipe);
2488 temp = I915_READ(reg);
2489 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2490 temp |= snb_b_fdi_train_param[i];
2491 I915_WRITE(reg, temp);
2496 reg = FDI_RX_IIR(pipe);
2497 temp = I915_READ(reg);
2498 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2500 if (temp & FDI_RX_BIT_LOCK ||
2501 (I915_READ(reg) & FDI_RX_BIT_LOCK)) {
2502 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
2503 DRM_DEBUG_KMS("FDI train 1 done.\n");
2508 DRM_ERROR("FDI train 1 fail!\n");
2511 reg = FDI_TX_CTL(pipe);
2512 temp = I915_READ(reg);
2513 temp &= ~FDI_LINK_TRAIN_NONE_IVB;
2514 temp |= FDI_LINK_TRAIN_PATTERN_2_IVB;
2515 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2516 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
2517 I915_WRITE(reg, temp);
2519 reg = FDI_RX_CTL(pipe);
2520 temp = I915_READ(reg);
2521 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2522 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
2523 I915_WRITE(reg, temp);
2528 for (i = 0; i < 4; i++ ) {
2529 reg = FDI_TX_CTL(pipe);
2530 temp = I915_READ(reg);
2531 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
2532 temp |= snb_b_fdi_train_param[i];
2533 I915_WRITE(reg, temp);
2538 reg = FDI_RX_IIR(pipe);
2539 temp = I915_READ(reg);
2540 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
2542 if (temp & FDI_RX_SYMBOL_LOCK) {
2543 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
2544 DRM_DEBUG_KMS("FDI train 2 done.\n");
2549 DRM_ERROR("FDI train 2 fail!\n");
2551 DRM_DEBUG_KMS("FDI train done.\n");
2554 static void ironlake_fdi_pll_enable(struct drm_crtc *crtc)
2556 struct drm_device *dev = crtc->dev;
2557 struct drm_i915_private *dev_priv = dev->dev_private;
2558 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2559 int pipe = intel_crtc->pipe;
2562 /* Write the TU size bits so error detection works */
2563 I915_WRITE(FDI_RX_TUSIZE1(pipe),
2564 I915_READ(PIPE_DATA_M1(pipe)) & TU_SIZE_MASK);
2566 /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
2567 reg = FDI_RX_CTL(pipe);
2568 temp = I915_READ(reg);
2569 temp &= ~((0x7 << 19) | (0x7 << 16));
2570 temp |= (intel_crtc->fdi_lanes - 1) << 19;
2571 temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
2572 I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
2577 /* Switch from Rawclk to PCDclk */
2578 temp = I915_READ(reg);
2579 I915_WRITE(reg, temp | FDI_PCDCLK);
2584 /* On Haswell, the PLL configuration for ports and pipes is handled
2585 * separately, as part of DDI setup */
2586 if (!IS_HASWELL(dev)) {
2587 /* Enable CPU FDI TX PLL, always on for Ironlake */
2588 reg = FDI_TX_CTL(pipe);
2589 temp = I915_READ(reg);
2590 if ((temp & FDI_TX_PLL_ENABLE) == 0) {
2591 I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
2599 static void cpt_phase_pointer_disable(struct drm_device *dev, int pipe)
2601 struct drm_i915_private *dev_priv = dev->dev_private;
2602 u32 flags = I915_READ(SOUTH_CHICKEN1);
2604 flags &= ~(FDI_PHASE_SYNC_EN(pipe));
2605 I915_WRITE(SOUTH_CHICKEN1, flags); /* once to disable... */
2606 flags &= ~(FDI_PHASE_SYNC_OVR(pipe));
2607 I915_WRITE(SOUTH_CHICKEN1, flags); /* then again to lock */
2608 POSTING_READ(SOUTH_CHICKEN1);
2611 static void ironlake_fdi_disable(struct drm_crtc *crtc)
2613 struct drm_device *dev = crtc->dev;
2614 struct drm_i915_private *dev_priv = dev->dev_private;
2615 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2616 int pipe = intel_crtc->pipe;
2619 /* disable CPU FDI tx and PCH FDI rx */
2620 reg = FDI_TX_CTL(pipe);
2621 temp = I915_READ(reg);
2622 I915_WRITE(reg, temp & ~FDI_TX_ENABLE);
2625 reg = FDI_RX_CTL(pipe);
2626 temp = I915_READ(reg);
2627 temp &= ~(0x7 << 16);
2628 temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
2629 I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
2634 /* Ironlake workaround, disable clock pointer after downing FDI */
2635 if (HAS_PCH_IBX(dev)) {
2636 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
2637 I915_WRITE(FDI_RX_CHICKEN(pipe),
2638 I915_READ(FDI_RX_CHICKEN(pipe) &
2639 ~FDI_RX_PHASE_SYNC_POINTER_EN));
2640 } else if (HAS_PCH_CPT(dev)) {
2641 cpt_phase_pointer_disable(dev, pipe);
2644 /* still set train pattern 1 */
2645 reg = FDI_TX_CTL(pipe);
2646 temp = I915_READ(reg);
2647 temp &= ~FDI_LINK_TRAIN_NONE;
2648 temp |= FDI_LINK_TRAIN_PATTERN_1;
2649 I915_WRITE(reg, temp);
2651 reg = FDI_RX_CTL(pipe);
2652 temp = I915_READ(reg);
2653 if (HAS_PCH_CPT(dev)) {
2654 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
2655 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
2657 temp &= ~FDI_LINK_TRAIN_NONE;
2658 temp |= FDI_LINK_TRAIN_PATTERN_1;
2660 /* BPC in FDI rx is consistent with that in PIPECONF */
2661 temp &= ~(0x07 << 16);
2662 temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
2663 I915_WRITE(reg, temp);
2669 static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
2671 struct drm_device *dev = crtc->dev;
2673 if (crtc->fb == NULL)
2677 intel_finish_fb(crtc->fb);
2681 static bool intel_crtc_driving_pch(struct drm_crtc *crtc)
2683 struct drm_device *dev = crtc->dev;
2684 struct drm_mode_config *mode_config = &dev->mode_config;
2685 struct intel_encoder *encoder;
2688 * If there's a non-PCH eDP on this crtc, it must be DP_A, and that
2689 * must be driven by its own crtc; no sharing is possible.
2691 list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
2692 if (encoder->base.crtc != crtc)
2695 /* On Haswell, LPT PCH handles the VGA connection via FDI, and Haswell
2696 * CPU handles all others */
2697 if (IS_HASWELL(dev)) {
2698 /* It is still unclear how this will work on PPT, so throw up a warning */
2699 if (!HAS_PCH_LPT(dev))
2700 DRM_DEBUG_KMS("Haswell: PPT\n");
2702 if (encoder->type == DRM_MODE_ENCODER_DAC) {
2703 DRM_DEBUG_KMS("Haswell detected DAC encoder, assuming is PCH\n");
2706 DRM_DEBUG_KMS("Haswell detected encoder %d, assuming is CPU\n",
2712 switch (encoder->type) {
2713 case INTEL_OUTPUT_EDP:
2714 if (!intel_encoder_is_pch_edp(&encoder->base))
2723 /* Program iCLKIP clock to the desired frequency */
2724 static void lpt_program_iclkip(struct drm_crtc *crtc)
2726 struct drm_device *dev = crtc->dev;
2727 struct drm_i915_private *dev_priv = dev->dev_private;
2728 u32 divsel, phaseinc, auxdiv, phasedir = 0;
2731 /* It is necessary to ungate the pixclk gate prior to programming
2732 * the divisors, and gate it back when it is done.
2734 I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_GATE);
2736 /* Disable SSCCTL */
2737 intel_sbi_write(dev_priv, SBI_SSCCTL6,
2738 intel_sbi_read(dev_priv, SBI_SSCCTL6) |
2739 SBI_SSCCTL_DISABLE);
2741 /* 20MHz is a corner case which is out of range for the 7-bit divisor */
2742 if (crtc->mode.clock == 20000) {
2747 /* The iCLK virtual clock root frequency is in MHz,
2748 * but the crtc->mode.clock in in KHz. To get the divisors,
2749 * it is necessary to divide one by another, so we
2750 * convert the virtual clock precision to KHz here for higher
2753 u32 iclk_virtual_root_freq = 172800 * 1000;
2754 u32 iclk_pi_range = 64;
2755 u32 desired_divisor, msb_divisor_value, pi_value;
2757 desired_divisor = (iclk_virtual_root_freq / crtc->mode.clock);
2758 msb_divisor_value = desired_divisor / iclk_pi_range;
2759 pi_value = desired_divisor % iclk_pi_range;
2762 divsel = msb_divisor_value - 2;
2763 phaseinc = pi_value;
2766 /* This should not happen with any sane values */
2767 if ((SBI_SSCDIVINTPHASE_DIVSEL(divsel) &
2768 ~SBI_SSCDIVINTPHASE_DIVSEL_MASK))
2769 DRM_DEBUG_KMS("DIVSEL_MASK");
2770 if ((SBI_SSCDIVINTPHASE_DIR(phasedir) &
2771 ~SBI_SSCDIVINTPHASE_INCVAL_MASK))
2772 DRM_DEBUG_KMS("INCVAL_MASK");
2774 DRM_DEBUG_KMS("iCLKIP clock: found settings for %dKHz refresh rate: auxdiv=%x, divsel=%x, phasedir=%x, phaseinc=%x\n",
2781 /* Program SSCDIVINTPHASE6 */
2782 temp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE6);
2783 temp &= ~SBI_SSCDIVINTPHASE_DIVSEL_MASK;
2784 temp |= SBI_SSCDIVINTPHASE_DIVSEL(divsel);
2785 temp &= ~SBI_SSCDIVINTPHASE_INCVAL_MASK;
2786 temp |= SBI_SSCDIVINTPHASE_INCVAL(phaseinc);
2787 temp |= SBI_SSCDIVINTPHASE_DIR(phasedir);
2788 temp |= SBI_SSCDIVINTPHASE_PROPAGATE;
2790 intel_sbi_write(dev_priv, SBI_SSCDIVINTPHASE6, temp);
2792 /* Program SSCAUXDIV */
2793 temp = intel_sbi_read(dev_priv, SBI_SSCAUXDIV6);
2794 temp &= ~SBI_SSCAUXDIV_FINALDIV2SEL(1);
2795 temp |= SBI_SSCAUXDIV_FINALDIV2SEL(auxdiv);
2796 intel_sbi_write(dev_priv, SBI_SSCAUXDIV6, temp);
2798 /* Enable modulator and associated divider */
2799 temp = intel_sbi_read(dev_priv, SBI_SSCCTL6);
2800 temp &= ~SBI_SSCCTL_DISABLE;
2801 intel_sbi_write(dev_priv, SBI_SSCCTL6, temp);
2803 /* Wait for initialization time */
2806 I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_UNGATE);
2810 * Enable PCH resources required for PCH ports:
2812 * - FDI training & RX/TX
2813 * - update transcoder timings
2814 * - DP transcoding bits
2817 static void ironlake_pch_enable(struct drm_crtc *crtc)
2819 struct drm_device *dev = crtc->dev;
2820 struct drm_i915_private *dev_priv = dev->dev_private;
2821 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
2822 int pipe = intel_crtc->pipe;
2825 assert_transcoder_disabled(dev_priv, pipe);
2827 /* For PCH output, training FDI link */
2828 dev_priv->display.fdi_link_train(crtc);
2830 intel_enable_pch_pll(intel_crtc);
2832 if (HAS_PCH_LPT(dev)) {
2833 DRM_DEBUG_KMS("LPT detected: programming iCLKIP\n");
2834 lpt_program_iclkip(crtc);
2835 } else if (HAS_PCH_CPT(dev)) {
2838 temp = I915_READ(PCH_DPLL_SEL);
2842 temp |= TRANSA_DPLL_ENABLE;
2843 sel = TRANSA_DPLLB_SEL;
2846 temp |= TRANSB_DPLL_ENABLE;
2847 sel = TRANSB_DPLLB_SEL;
2850 temp |= TRANSC_DPLL_ENABLE;
2851 sel = TRANSC_DPLLB_SEL;
2854 if (intel_crtc->pch_pll->pll_reg == _PCH_DPLL_B)
2858 I915_WRITE(PCH_DPLL_SEL, temp);
2861 /* set transcoder timing, panel must allow it */
2862 assert_panel_unlocked(dev_priv, pipe);
2863 I915_WRITE(TRANS_HTOTAL(pipe), I915_READ(HTOTAL(pipe)));
2864 I915_WRITE(TRANS_HBLANK(pipe), I915_READ(HBLANK(pipe)));
2865 I915_WRITE(TRANS_HSYNC(pipe), I915_READ(HSYNC(pipe)));
2867 I915_WRITE(TRANS_VTOTAL(pipe), I915_READ(VTOTAL(pipe)));
2868 I915_WRITE(TRANS_VBLANK(pipe), I915_READ(VBLANK(pipe)));
2869 I915_WRITE(TRANS_VSYNC(pipe), I915_READ(VSYNC(pipe)));
2870 I915_WRITE(TRANS_VSYNCSHIFT(pipe), I915_READ(VSYNCSHIFT(pipe)));
2872 if (!IS_HASWELL(dev))
2873 intel_fdi_normal_train(crtc);
2875 /* For PCH DP, enable TRANS_DP_CTL */
2876 if (HAS_PCH_CPT(dev) &&
2877 (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
2878 intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
2879 u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) >> 5;
2880 reg = TRANS_DP_CTL(pipe);
2881 temp = I915_READ(reg);
2882 temp &= ~(TRANS_DP_PORT_SEL_MASK |
2883 TRANS_DP_SYNC_MASK |
2885 temp |= (TRANS_DP_OUTPUT_ENABLE |
2886 TRANS_DP_ENH_FRAMING);
2887 temp |= bpc << 9; /* same format but at 11:9 */
2889 if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
2890 temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
2891 if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
2892 temp |= TRANS_DP_VSYNC_ACTIVE_HIGH;
2894 switch (intel_trans_dp_port_sel(crtc)) {
2896 temp |= TRANS_DP_PORT_SEL_B;
2899 temp |= TRANS_DP_PORT_SEL_C;
2902 temp |= TRANS_DP_PORT_SEL_D;
2905 DRM_DEBUG_KMS("Wrong PCH DP port return. Guess port B\n");
2906 temp |= TRANS_DP_PORT_SEL_B;
2910 I915_WRITE(reg, temp);
2913 intel_enable_transcoder(dev_priv, pipe);
2916 static void intel_put_pch_pll(struct intel_crtc *intel_crtc)
2918 struct intel_pch_pll *pll = intel_crtc->pch_pll;
2923 if (pll->refcount == 0) {
2924 printf("bad PCH PLL refcount\n");
2929 intel_crtc->pch_pll = NULL;
2932 static struct intel_pch_pll *intel_get_pch_pll(struct intel_crtc *intel_crtc, u32 dpll, u32 fp)
2934 struct drm_i915_private *dev_priv = intel_crtc->base.dev->dev_private;
2935 struct intel_pch_pll *pll;
2938 pll = intel_crtc->pch_pll;
2940 DRM_DEBUG_KMS("CRTC:%d reusing existing PCH PLL %x\n",
2941 intel_crtc->base.base.id, pll->pll_reg);
2945 if (HAS_PCH_IBX(dev_priv->dev)) {
2946 /* Ironlake PCH has a fixed PLL->PCH pipe mapping. */
2947 i = intel_crtc->pipe;
2948 pll = &dev_priv->pch_plls[i];
2950 DRM_DEBUG_KMS("CRTC:%d using pre-allocated PCH PLL %x\n",
2951 intel_crtc->base.base.id, pll->pll_reg);
2956 for (i = 0; i < dev_priv->num_pch_pll; i++) {
2957 pll = &dev_priv->pch_plls[i];
2959 /* Only want to check enabled timings first */
2960 if (pll->refcount == 0)
2963 if (dpll == (I915_READ(pll->pll_reg) & 0x7fffffff) &&
2964 fp == I915_READ(pll->fp0_reg)) {
2965 DRM_DEBUG_KMS("CRTC:%d sharing existing PCH PLL %x (refcount %d, ative %d)\n",
2966 intel_crtc->base.base.id,
2967 pll->pll_reg, pll->refcount, pll->active);
2973 /* Ok no matching timings, maybe there's a free one? */
2974 for (i = 0; i < dev_priv->num_pch_pll; i++) { /* XXXKIB: HACK */
2975 pll = &dev_priv->pch_plls[i];
2976 if (pll->refcount == 0) {
2977 DRM_DEBUG_KMS("CRTC:%d allocated PCH PLL %x\n",
2978 intel_crtc->base.base.id, pll->pll_reg);
2986 intel_crtc->pch_pll = pll;
2988 DRM_DEBUG_DRIVER("using pll %d for pipe %d\n", i, intel_crtc->pipe);
2989 prepare: /* separate function? */
2990 DRM_DEBUG_DRIVER("switching PLL %x off\n", pll->pll_reg);
2992 /* Wait for the clocks to stabilize before rewriting the regs */
2993 I915_WRITE(pll->pll_reg, dpll & ~DPLL_VCO_ENABLE);
2994 POSTING_READ(pll->pll_reg);
2997 I915_WRITE(pll->fp0_reg, fp);
2998 I915_WRITE(pll->pll_reg, dpll & ~DPLL_VCO_ENABLE);
3003 void intel_cpt_verify_modeset(struct drm_device *dev, int pipe)
3005 struct drm_i915_private *dev_priv = dev->dev_private;
3006 int dslreg = PIPEDSL(pipe), tc2reg = TRANS_CHICKEN2(pipe);
3009 temp = I915_READ(dslreg);
3011 if (_intel_wait_for(dev, I915_READ(dslreg) != temp, 5, 1, "915cp1")) {
3012 /* Without this, mode sets may fail silently on FDI */
3013 I915_WRITE(tc2reg, TRANS_AUTOTRAIN_GEN_STALL_DIS);
3015 I915_WRITE(tc2reg, 0);
3016 if (_intel_wait_for(dev, I915_READ(dslreg) != temp, 5, 1,
3018 DRM_ERROR("mode set failed: pipe %d stuck\n", pipe);
3022 static void ironlake_crtc_enable(struct drm_crtc *crtc)
3024 struct drm_device *dev = crtc->dev;
3025 struct drm_i915_private *dev_priv = dev->dev_private;
3026 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3027 int pipe = intel_crtc->pipe;
3028 int plane = intel_crtc->plane;
3032 if (intel_crtc->active)
3035 intel_crtc->active = true;
3036 intel_update_watermarks(dev);
3038 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
3039 temp = I915_READ(PCH_LVDS);
3040 if ((temp & LVDS_PORT_EN) == 0)
3041 I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN);
3044 is_pch_port = intel_crtc_driving_pch(crtc);
3047 ironlake_fdi_pll_enable(crtc);
3049 ironlake_fdi_disable(crtc);
3052 /* Enable panel fitting for LVDS */
3053 if (dev_priv->pch_pf_size &&
3054 (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) || HAS_eDP)) {
3055 /* Force use of hard-coded filter coefficients
3056 * as some pre-programmed values are broken,
3059 I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3);
3060 I915_WRITE(PF_WIN_POS(pipe), dev_priv->pch_pf_pos);
3061 I915_WRITE(PF_WIN_SZ(pipe), dev_priv->pch_pf_size);
3064 intel_enable_pipe(dev_priv, pipe, is_pch_port);
3065 intel_enable_plane(dev_priv, plane, pipe);
3068 ironlake_pch_enable(crtc);
3070 intel_crtc_load_lut(crtc);
3073 intel_update_fbc(dev);
3076 intel_crtc_update_cursor(crtc, true);
3079 static void ironlake_crtc_disable(struct drm_crtc *crtc)
3081 struct drm_device *dev = crtc->dev;
3082 struct drm_i915_private *dev_priv = dev->dev_private;
3083 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3084 int pipe = intel_crtc->pipe;
3085 int plane = intel_crtc->plane;
3088 if (!intel_crtc->active)
3091 intel_crtc_wait_for_pending_flips(crtc);
3092 drm_vblank_off(dev, pipe);
3093 intel_crtc_update_cursor(crtc, false);
3095 intel_disable_plane(dev_priv, plane, pipe);
3097 if (dev_priv->cfb_plane == plane)
3098 intel_disable_fbc(dev);
3100 intel_disable_pipe(dev_priv, pipe);
3103 I915_WRITE(PF_CTL(pipe), 0);
3104 I915_WRITE(PF_WIN_SZ(pipe), 0);
3106 ironlake_fdi_disable(crtc);
3108 /* This is a horrible layering violation; we should be doing this in
3109 * the connector/encoder ->prepare instead, but we don't always have
3110 * enough information there about the config to know whether it will
3111 * actually be necessary or just cause undesired flicker.
3113 intel_disable_pch_ports(dev_priv, pipe);
3115 intel_disable_transcoder(dev_priv, pipe);
3117 if (HAS_PCH_CPT(dev)) {
3118 /* disable TRANS_DP_CTL */
3119 reg = TRANS_DP_CTL(pipe);
3120 temp = I915_READ(reg);
3121 temp &= ~(TRANS_DP_OUTPUT_ENABLE | TRANS_DP_PORT_SEL_MASK);
3122 temp |= TRANS_DP_PORT_SEL_NONE;
3123 I915_WRITE(reg, temp);
3125 /* disable DPLL_SEL */
3126 temp = I915_READ(PCH_DPLL_SEL);
3129 temp &= ~(TRANSA_DPLL_ENABLE | TRANSA_DPLLB_SEL);
3132 temp &= ~(TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
3135 /* C shares PLL A or B */
3136 temp &= ~(TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL);
3139 KASSERT(1, ("Wrong pipe %d", pipe)); /* wtf */
3141 I915_WRITE(PCH_DPLL_SEL, temp);
3144 /* disable PCH DPLL */
3145 intel_disable_pch_pll(intel_crtc);
3147 /* Switch from PCDclk to Rawclk */
3148 reg = FDI_RX_CTL(pipe);
3149 temp = I915_READ(reg);
3150 I915_WRITE(reg, temp & ~FDI_PCDCLK);
3152 /* Disable CPU FDI TX PLL */
3153 reg = FDI_TX_CTL(pipe);
3154 temp = I915_READ(reg);
3155 I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE);
3160 reg = FDI_RX_CTL(pipe);
3161 temp = I915_READ(reg);
3162 I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE);
3164 /* Wait for the clocks to turn off. */
3168 intel_crtc->active = false;
3169 intel_update_watermarks(dev);
3172 intel_update_fbc(dev);
3176 static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
3178 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3179 int pipe = intel_crtc->pipe;
3180 int plane = intel_crtc->plane;
3182 /* XXX: When our outputs are all unaware of DPMS modes other than off
3183 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
3186 case DRM_MODE_DPMS_ON:
3187 case DRM_MODE_DPMS_STANDBY:
3188 case DRM_MODE_DPMS_SUSPEND:
3189 DRM_DEBUG_KMS("crtc %d/%d dpms on\n", pipe, plane);
3190 ironlake_crtc_enable(crtc);
3193 case DRM_MODE_DPMS_OFF:
3194 DRM_DEBUG_KMS("crtc %d/%d dpms off\n", pipe, plane);
3195 ironlake_crtc_disable(crtc);
3200 static void ironlake_crtc_off(struct drm_crtc *crtc)
3202 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3203 intel_put_pch_pll(intel_crtc);
3206 static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable)
3208 if (!enable && intel_crtc->overlay) {
3209 struct drm_device *dev = intel_crtc->base.dev;
3210 struct drm_i915_private *dev_priv = dev->dev_private;
3213 dev_priv->mm.interruptible = false;
3214 (void) intel_overlay_switch_off(intel_crtc->overlay);
3215 dev_priv->mm.interruptible = true;
3219 /* Let userspace switch the overlay on again. In most cases userspace
3220 * has to recompute where to put it anyway.
3224 static void i9xx_crtc_enable(struct drm_crtc *crtc)
3226 struct drm_device *dev = crtc->dev;
3227 struct drm_i915_private *dev_priv = dev->dev_private;
3228 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3229 int pipe = intel_crtc->pipe;
3230 int plane = intel_crtc->plane;
3232 if (intel_crtc->active)
3235 intel_crtc->active = true;
3236 intel_update_watermarks(dev);
3238 intel_enable_pll(dev_priv, pipe);
3239 intel_enable_pipe(dev_priv, pipe, false);
3240 intel_enable_plane(dev_priv, plane, pipe);
3242 intel_crtc_load_lut(crtc);
3243 intel_update_fbc(dev);
3245 /* Give the overlay scaler a chance to enable if it's on this pipe */
3246 intel_crtc_dpms_overlay(intel_crtc, true);
3247 intel_crtc_update_cursor(crtc, true);
3250 static void i9xx_crtc_disable(struct drm_crtc *crtc)
3252 struct drm_device *dev = crtc->dev;
3253 struct drm_i915_private *dev_priv = dev->dev_private;
3254 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3255 int pipe = intel_crtc->pipe;
3256 int plane = intel_crtc->plane;
3258 if (!intel_crtc->active)
3261 /* Give the overlay scaler a chance to disable if it's on this pipe */
3262 intel_crtc_wait_for_pending_flips(crtc);
3263 drm_vblank_off(dev, pipe);
3264 intel_crtc_dpms_overlay(intel_crtc, false);
3265 intel_crtc_update_cursor(crtc, false);
3267 if (dev_priv->cfb_plane == plane)
3268 intel_disable_fbc(dev);
3270 intel_disable_plane(dev_priv, plane, pipe);
3271 intel_disable_pipe(dev_priv, pipe);
3272 intel_disable_pll(dev_priv, pipe);
3274 intel_crtc->active = false;
3275 intel_update_fbc(dev);
3276 intel_update_watermarks(dev);
3279 static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
3281 /* XXX: When our outputs are all unaware of DPMS modes other than off
3282 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
3285 case DRM_MODE_DPMS_ON:
3286 case DRM_MODE_DPMS_STANDBY:
3287 case DRM_MODE_DPMS_SUSPEND:
3288 i9xx_crtc_enable(crtc);
3290 case DRM_MODE_DPMS_OFF:
3291 i9xx_crtc_disable(crtc);
3296 static void i9xx_crtc_off(struct drm_crtc *crtc)
3301 * Sets the power management mode of the pipe and plane.
3303 static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
3305 struct drm_device *dev = crtc->dev;
3306 struct drm_i915_private *dev_priv = dev->dev_private;
3307 struct drm_i915_master_private *master_priv;
3308 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3309 int pipe = intel_crtc->pipe;
3312 if (intel_crtc->dpms_mode == mode)
3315 intel_crtc->dpms_mode = mode;
3317 dev_priv->display.dpms(crtc, mode);
3319 if (!dev->primary->master)
3322 master_priv = dev->primary->master->driver_priv;
3323 if (!master_priv->sarea_priv)
3326 enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF;
3330 master_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0;
3331 master_priv->sarea_priv->pipeA_h = enabled ? crtc->mode.vdisplay : 0;
3334 master_priv->sarea_priv->pipeB_w = enabled ? crtc->mode.hdisplay : 0;
3335 master_priv->sarea_priv->pipeB_h = enabled ? crtc->mode.vdisplay : 0;
3338 DRM_ERROR("Can't update pipe %c in SAREA\n", pipe_name(pipe));
3343 static void intel_crtc_disable(struct drm_crtc *crtc)
3345 struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
3346 struct drm_device *dev = crtc->dev;
3347 struct drm_i915_private *dev_priv = dev->dev_private;
3349 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
3350 dev_priv->display.off(crtc);
3352 assert_plane_disabled(dev->dev_private, to_intel_crtc(crtc)->plane);
3353 assert_pipe_disabled(dev->dev_private, to_intel_crtc(crtc)->pipe);
3357 intel_unpin_fb_obj(to_intel_framebuffer(crtc->fb)->obj);
3362 /* Prepare for a mode set.
3364 * Note we could be a lot smarter here. We need to figure out which outputs
3365 * will be enabled, which disabled (in short, how the config will changes)
3366 * and perform the minimum necessary steps to accomplish that, e.g. updating
3367 * watermarks, FBC configuration, making sure PLLs are programmed correctly,
3368 * panel fitting is in the proper state, etc.
3370 static void i9xx_crtc_prepare(struct drm_crtc *crtc)
3372 i9xx_crtc_disable(crtc);
3375 static void i9xx_crtc_commit(struct drm_crtc *crtc)
3377 i9xx_crtc_enable(crtc);
3380 static void ironlake_crtc_prepare(struct drm_crtc *crtc)
3382 ironlake_crtc_disable(crtc);
3385 static void ironlake_crtc_commit(struct drm_crtc *crtc)
3387 ironlake_crtc_enable(crtc);
3390 void intel_encoder_prepare(struct drm_encoder *encoder)
3392 struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
3393 /* lvds has its own version of prepare see intel_lvds_prepare */
3394 encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
3397 void intel_encoder_commit(struct drm_encoder *encoder)
3399 struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
3400 struct drm_device *dev = encoder->dev;
3401 struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
3403 /* lvds has its own version of commit see intel_lvds_commit */
3404 encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
3406 if (HAS_PCH_CPT(dev))
3407 intel_cpt_verify_modeset(dev, intel_crtc->pipe);
3410 void intel_encoder_destroy(struct drm_encoder *encoder)
3412 struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
3414 drm_encoder_cleanup(encoder);
3415 free(intel_encoder, DRM_MEM_KMS);
3418 static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
3419 const struct drm_display_mode *mode,
3420 struct drm_display_mode *adjusted_mode)
3422 struct drm_device *dev = crtc->dev;
3424 if (HAS_PCH_SPLIT(dev)) {
3425 /* FDI link clock is fixed at 2.7G */
3426 if (mode->clock * 3 > IRONLAKE_FDI_FREQ * 4)
3430 /* All interlaced capable intel hw wants timings in frames. Note though
3431 * that intel_lvds_mode_fixup does some funny tricks with the crtc
3432 * timings, so we need to be careful not to clobber these.*/
3433 if (!(adjusted_mode->private_flags & INTEL_MODE_CRTC_TIMINGS_SET))
3434 drm_mode_set_crtcinfo(adjusted_mode, 0);
3439 static int valleyview_get_display_clock_speed(struct drm_device *dev)
3441 return 400000; /* FIXME */
3444 static int i945_get_display_clock_speed(struct drm_device *dev)
3449 static int i915_get_display_clock_speed(struct drm_device *dev)
3454 static int i9xx_misc_get_display_clock_speed(struct drm_device *dev)
3459 static int i915gm_get_display_clock_speed(struct drm_device *dev)
3463 gcfgc = pci_read_config(dev->dev, GCFGC, 2);
3465 if (gcfgc & GC_LOW_FREQUENCY_ENABLE)
3468 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
3469 case GC_DISPLAY_CLOCK_333_MHZ:
3472 case GC_DISPLAY_CLOCK_190_200_MHZ:
3478 static int i865_get_display_clock_speed(struct drm_device *dev)
3483 static int i855_get_display_clock_speed(struct drm_device *dev)
3486 /* Assume that the hardware is in the high speed state. This
3487 * should be the default.
3489 switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
3490 case GC_CLOCK_133_200:
3491 case GC_CLOCK_100_200:
3493 case GC_CLOCK_166_250:
3495 case GC_CLOCK_100_133:
3499 /* Shouldn't happen */
3503 static int i830_get_display_clock_speed(struct drm_device *dev)
3517 fdi_reduce_ratio(u32 *num, u32 *den)
3519 while (*num > 0xffffff || *den > 0xffffff) {
3526 ironlake_compute_m_n(int bits_per_pixel, int nlanes, int pixel_clock,
3527 int link_clock, struct fdi_m_n *m_n)
3529 m_n->tu = 64; /* default size */
3531 /* BUG_ON(pixel_clock > INT_MAX / 36); */
3532 m_n->gmch_m = bits_per_pixel * pixel_clock;
3533 m_n->gmch_n = link_clock * nlanes * 8;
3534 fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
3536 m_n->link_m = pixel_clock;
3537 m_n->link_n = link_clock;
3538 fdi_reduce_ratio(&m_n->link_m, &m_n->link_n);
3541 static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
3543 if (i915_panel_use_ssc >= 0)
3544 return i915_panel_use_ssc != 0;
3545 return dev_priv->lvds_use_ssc
3546 && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
3550 * intel_choose_pipe_bpp_dither - figure out what color depth the pipe should send
3551 * @crtc: CRTC structure
3552 * @mode: requested mode
3554 * A pipe may be connected to one or more outputs. Based on the depth of the
3555 * attached framebuffer, choose a good color depth to use on the pipe.
3557 * If possible, match the pipe depth to the fb depth. In some cases, this
3558 * isn't ideal, because the connected output supports a lesser or restricted
3559 * set of depths. Resolve that here:
3560 * LVDS typically supports only 6bpc, so clamp down in that case
3561 * HDMI supports only 8bpc or 12bpc, so clamp to 8bpc with dither for 10bpc
3562 * Displays may support a restricted set as well, check EDID and clamp as
3564 * DP may want to dither down to 6bpc to fit larger modes
3567 * Dithering requirement (i.e. false if display bpc and pipe bpc match,
3568 * true if they don't match).
3570 static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
3571 unsigned int *pipe_bpp,
3572 struct drm_display_mode *mode)
3574 struct drm_device *dev = crtc->dev;
3575 struct drm_i915_private *dev_priv = dev->dev_private;
3576 struct drm_encoder *encoder;
3577 struct drm_connector *connector;
3578 unsigned int display_bpc = UINT_MAX, bpc;
3580 /* Walk the encoders & connectors on this crtc, get min bpc */
3581 list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
3582 struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
3584 if (encoder->crtc != crtc)
3587 if (intel_encoder->type == INTEL_OUTPUT_LVDS) {
3588 unsigned int lvds_bpc;
3590 if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) ==
3596 if (lvds_bpc < display_bpc) {
3597 DRM_DEBUG_KMS("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc);
3598 display_bpc = lvds_bpc;
3603 if (intel_encoder->type == INTEL_OUTPUT_EDP) {
3604 /* Use VBT settings if we have an eDP panel */
3605 unsigned int edp_bpc = dev_priv->edp.bpp / 3;
3607 if (edp_bpc < display_bpc) {
3608 DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc);
3609 display_bpc = edp_bpc;
3614 /* Not one of the known troublemakers, check the EDID */
3615 list_for_each_entry(connector, &dev->mode_config.connector_list,
3617 if (connector->encoder != encoder)
3620 /* Don't use an invalid EDID bpc value */
3621 if (connector->display_info.bpc &&
3622 connector->display_info.bpc < display_bpc) {
3623 DRM_DEBUG_KMS("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc);
3624 display_bpc = connector->display_info.bpc;
3629 * HDMI is either 12 or 8, so if the display lets 10bpc sneak
3630 * through, clamp it down. (Note: >12bpc will be caught below.)
3632 if (intel_encoder->type == INTEL_OUTPUT_HDMI) {
3633 if (display_bpc > 8 && display_bpc < 12) {
3634 DRM_DEBUG_KMS("forcing bpc to 12 for HDMI\n");
3637 DRM_DEBUG_KMS("forcing bpc to 8 for HDMI\n");
3643 if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
3644 DRM_DEBUG_KMS("Dithering DP to 6bpc\n");
3649 * We could just drive the pipe at the highest bpc all the time and
3650 * enable dithering as needed, but that costs bandwidth. So choose
3651 * the minimum value that expresses the full color range of the fb but
3652 * also stays within the max display bpc discovered above.
3655 switch (crtc->fb->depth) {
3657 bpc = 8; /* since we go through a colormap */
3661 bpc = 6; /* min is 18bpp */
3673 DRM_DEBUG("unsupported depth, assuming 24 bits\n");
3674 bpc = min((unsigned int)8, display_bpc);
3678 display_bpc = min(display_bpc, bpc);
3680 DRM_DEBUG_KMS("setting pipe bpc to %d (max display bpc %d)\n",
3683 *pipe_bpp = display_bpc * 3;
3685 return display_bpc != bpc;
3688 static int i9xx_get_refclk(struct drm_crtc *crtc, int num_connectors)
3690 struct drm_device *dev = crtc->dev;
3691 struct drm_i915_private *dev_priv = dev->dev_private;
3694 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
3695 intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
3696 refclk = dev_priv->lvds_ssc_freq * 1000;
3697 DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
3699 } else if (!IS_GEN2(dev)) {
3708 static void i9xx_adjust_sdvo_tv_clock(struct drm_display_mode *adjusted_mode,
3709 intel_clock_t *clock)
3711 /* SDVO TV has fixed PLL values depend on its clock range,
3712 this mirrors vbios setting. */
3713 if (adjusted_mode->clock >= 100000
3714 && adjusted_mode->clock < 140500) {
3720 } else if (adjusted_mode->clock >= 140500
3721 && adjusted_mode->clock <= 200000) {
3730 static void i9xx_update_pll_dividers(struct drm_crtc *crtc,
3731 intel_clock_t *clock,
3732 intel_clock_t *reduced_clock)
3734 struct drm_device *dev = crtc->dev;
3735 struct drm_i915_private *dev_priv = dev->dev_private;
3736 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3737 int pipe = intel_crtc->pipe;
3740 if (IS_PINEVIEW(dev)) {
3741 fp = (1 << clock->n) << 16 | clock->m1 << 8 | clock->m2;
3743 fp2 = (1 << reduced_clock->n) << 16 |
3744 reduced_clock->m1 << 8 | reduced_clock->m2;
3746 fp = clock->n << 16 | clock->m1 << 8 | clock->m2;
3748 fp2 = reduced_clock->n << 16 | reduced_clock->m1 << 8 |
3752 I915_WRITE(FP0(pipe), fp);
3754 intel_crtc->lowfreq_avail = false;
3755 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
3756 reduced_clock && i915_powersave) {
3757 I915_WRITE(FP1(pipe), fp2);
3758 intel_crtc->lowfreq_avail = true;
3760 I915_WRITE(FP1(pipe), fp);
3764 static void intel_update_lvds(struct drm_crtc *crtc, intel_clock_t *clock,
3765 struct drm_display_mode *adjusted_mode)
3767 struct drm_device *dev = crtc->dev;
3768 struct drm_i915_private *dev_priv = dev->dev_private;
3769 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3770 int pipe = intel_crtc->pipe;
3773 temp = I915_READ(LVDS);
3774 temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
3776 temp |= LVDS_PIPEB_SELECT;
3778 temp &= ~LVDS_PIPEB_SELECT;
3780 /* set the corresponsding LVDS_BORDER bit */
3781 temp |= dev_priv->lvds_border_bits;
3782 /* Set the B0-B3 data pairs corresponding to whether we're going to
3783 * set the DPLLs for dual-channel mode or not.
3786 temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
3788 temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
3790 /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
3791 * appropriately here, but we need to look more thoroughly into how
3792 * panels behave in the two modes.
3794 /* set the dithering flag on LVDS as needed */
3795 if (INTEL_INFO(dev)->gen >= 4) {
3796 if (dev_priv->lvds_dither)
3797 temp |= LVDS_ENABLE_DITHER;
3799 temp &= ~LVDS_ENABLE_DITHER;
3801 temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
3802 if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
3803 temp |= LVDS_HSYNC_POLARITY;
3804 if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
3805 temp |= LVDS_VSYNC_POLARITY;
3806 I915_WRITE(LVDS, temp);
3809 static void i9xx_update_pll(struct drm_crtc *crtc,
3810 struct drm_display_mode *mode,
3811 struct drm_display_mode *adjusted_mode,
3812 intel_clock_t *clock, intel_clock_t *reduced_clock,
3815 struct drm_device *dev = crtc->dev;
3816 struct drm_i915_private *dev_priv = dev->dev_private;
3817 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3818 int pipe = intel_crtc->pipe;
3822 is_sdvo = intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ||
3823 intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI);
3825 dpll = DPLL_VGA_MODE_DIS;
3827 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
3828 dpll |= DPLLB_MODE_LVDS;
3830 dpll |= DPLLB_MODE_DAC_SERIAL;
3832 int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
3833 if (pixel_multiplier > 1) {
3834 if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
3835 dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
3837 dpll |= DPLL_DVO_HIGH_SPEED;
3839 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
3840 dpll |= DPLL_DVO_HIGH_SPEED;
3842 /* compute bitmask from p1 value */
3843 if (IS_PINEVIEW(dev))
3844 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
3846 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
3847 if (IS_G4X(dev) && reduced_clock)
3848 dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
3850 switch (clock->p2) {
3852 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
3855 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
3858 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
3861 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
3864 if (INTEL_INFO(dev)->gen >= 4)
3865 dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
3867 if (is_sdvo && intel_pipe_has_type(crtc, INTEL_OUTPUT_TVOUT))
3868 dpll |= PLL_REF_INPUT_TVCLKINBC;
3869 else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_TVOUT))
3870 /* XXX: just matching BIOS for now */
3871 /* dpll |= PLL_REF_INPUT_TVCLKINBC; */
3873 else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
3874 intel_panel_use_ssc(dev_priv) && num_connectors < 2)
3875 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
3877 dpll |= PLL_REF_INPUT_DREFCLK;
3879 dpll |= DPLL_VCO_ENABLE;
3880 I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
3881 POSTING_READ(DPLL(pipe));
3884 /* The LVDS pin pair needs to be on before the DPLLs are enabled.
3885 * This is an exception to the general rule that mode_set doesn't turn
3888 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
3889 intel_update_lvds(crtc, clock, adjusted_mode);
3891 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
3892 intel_dp_set_m_n(crtc, mode, adjusted_mode);
3894 I915_WRITE(DPLL(pipe), dpll);
3896 /* Wait for the clocks to stabilize. */
3897 POSTING_READ(DPLL(pipe));
3900 if (INTEL_INFO(dev)->gen >= 4) {
3903 temp = intel_mode_get_pixel_multiplier(adjusted_mode);
3905 temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
3909 I915_WRITE(DPLL_MD(pipe), temp);
3911 /* The pixel multiplier can only be updated once the
3912 * DPLL is enabled and the clocks are stable.
3914 * So write it again.
3916 I915_WRITE(DPLL(pipe), dpll);
3920 static void i8xx_update_pll(struct drm_crtc *crtc,
3921 struct drm_display_mode *adjusted_mode,
3922 intel_clock_t *clock,
3925 struct drm_device *dev = crtc->dev;
3926 struct drm_i915_private *dev_priv = dev->dev_private;
3927 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3928 int pipe = intel_crtc->pipe;
3931 dpll = DPLL_VGA_MODE_DIS;
3933 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
3934 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
3937 dpll |= PLL_P1_DIVIDE_BY_TWO;
3939 dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
3941 dpll |= PLL_P2_DIVIDE_BY_4;
3944 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_TVOUT))
3945 /* XXX: just matching BIOS for now */
3946 /* dpll |= PLL_REF_INPUT_TVCLKINBC; */
3948 else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
3949 intel_panel_use_ssc(dev_priv) && num_connectors < 2)
3950 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
3952 dpll |= PLL_REF_INPUT_DREFCLK;
3954 dpll |= DPLL_VCO_ENABLE;
3955 I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
3956 POSTING_READ(DPLL(pipe));
3959 I915_WRITE(DPLL(pipe), dpll);
3961 /* Wait for the clocks to stabilize. */
3962 POSTING_READ(DPLL(pipe));
3965 /* The LVDS pin pair needs to be on before the DPLLs are enabled.
3966 * This is an exception to the general rule that mode_set doesn't turn
3969 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
3970 intel_update_lvds(crtc, clock, adjusted_mode);
3972 /* The pixel multiplier can only be updated once the
3973 * DPLL is enabled and the clocks are stable.
3975 * So write it again.
3977 I915_WRITE(DPLL(pipe), dpll);
3980 static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
3981 struct drm_display_mode *mode,
3982 struct drm_display_mode *adjusted_mode,
3984 struct drm_framebuffer *old_fb)
3986 struct drm_device *dev = crtc->dev;
3987 struct drm_i915_private *dev_priv = dev->dev_private;
3988 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
3989 int pipe = intel_crtc->pipe;
3990 int plane = intel_crtc->plane;
3991 int refclk, num_connectors = 0;
3992 intel_clock_t clock, reduced_clock;
3993 u32 dspcntr, pipeconf, vsyncshift;
3994 bool ok, has_reduced_clock = false, is_sdvo = false;
3995 bool is_lvds = false, is_tv = false, is_dp = false;
3996 struct drm_mode_config *mode_config = &dev->mode_config;
3997 struct intel_encoder *encoder;
3998 const intel_limit_t *limit;
4001 list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
4002 if (encoder->base.crtc != crtc)
4005 switch (encoder->type) {
4006 case INTEL_OUTPUT_LVDS:
4009 case INTEL_OUTPUT_SDVO:
4010 case INTEL_OUTPUT_HDMI:
4012 if (encoder->needs_tv_clock)
4015 case INTEL_OUTPUT_TVOUT:
4018 case INTEL_OUTPUT_DISPLAYPORT:
4026 refclk = i9xx_get_refclk(crtc, num_connectors);
4029 * Returns a set of divisors for the desired target clock with the given
4030 * refclk, or false. The returned values represent the clock equation:
4031 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
4033 limit = intel_limit(crtc, refclk);
4034 ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, NULL,
4037 DRM_ERROR("Couldn't find PLL settings for mode!\n");
4041 /* Ensure that the cursor is valid for the new mode before changing... */
4042 intel_crtc_update_cursor(crtc, true);
4044 if (is_lvds && dev_priv->lvds_downclock_avail) {
4046 * Ensure we match the reduced clock's P to the target clock.
4047 * If the clocks don't match, we can't switch the display clock
4048 * by using the FP0/FP1. In such case we will disable the LVDS
4049 * downclock feature.
4051 has_reduced_clock = limit->find_pll(limit, crtc,
4052 dev_priv->lvds_downclock,
4058 if (is_sdvo && is_tv)
4059 i9xx_adjust_sdvo_tv_clock(adjusted_mode, &clock);
4061 i9xx_update_pll_dividers(crtc, &clock, has_reduced_clock ?
4062 &reduced_clock : NULL);
4065 i8xx_update_pll(crtc, adjusted_mode, &clock, num_connectors);
4067 i9xx_update_pll(crtc, mode, adjusted_mode, &clock,
4068 has_reduced_clock ? &reduced_clock : NULL,
4071 /* setup pipeconf */
4072 pipeconf = I915_READ(PIPECONF(pipe));
4074 /* Set up the display plane register */
4075 dspcntr = DISPPLANE_GAMMA_ENABLE;
4078 dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
4080 dspcntr |= DISPPLANE_SEL_PIPE_B;
4082 if (pipe == 0 && INTEL_INFO(dev)->gen < 4) {
4083 /* Enable pixel doubling when the dot clock is > 90% of the (display)
4086 * XXX: No double-wide on 915GM pipe B. Is that the only reason for the
4090 dev_priv->display.get_display_clock_speed(dev) * 9 / 10)
4091 pipeconf |= PIPECONF_DOUBLE_WIDE;
4093 pipeconf &= ~PIPECONF_DOUBLE_WIDE;
4096 /* default to 8bpc */
4097 pipeconf &= ~(PIPECONF_BPP_MASK | PIPECONF_DITHER_EN);
4099 if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
4100 pipeconf |= PIPECONF_BPP_6 |
4101 PIPECONF_DITHER_EN |
4102 PIPECONF_DITHER_TYPE_SP;
4106 DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
4107 drm_mode_debug_printmodeline(mode);
4109 if (HAS_PIPE_CXSR(dev)) {
4110 if (intel_crtc->lowfreq_avail) {
4111 DRM_DEBUG_KMS("enabling CxSR downclocking\n");
4112 pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
4114 DRM_DEBUG_KMS("disabling CxSR downclocking\n");
4115 pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
4119 pipeconf &= ~PIPECONF_INTERLACE_MASK;
4120 if (!IS_GEN2(dev) &&
4121 adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
4122 pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
4123 /* the chip adds 2 halflines automatically */
4124 adjusted_mode->crtc_vtotal -= 1;
4125 adjusted_mode->crtc_vblank_end -= 1;
4126 vsyncshift = adjusted_mode->crtc_hsync_start
4127 - adjusted_mode->crtc_htotal/2;
4129 pipeconf |= PIPECONF_PROGRESSIVE;
4134 I915_WRITE(VSYNCSHIFT(pipe), vsyncshift);
4136 I915_WRITE(HTOTAL(pipe),
4137 (adjusted_mode->crtc_hdisplay - 1) |
4138 ((adjusted_mode->crtc_htotal - 1) << 16));
4139 I915_WRITE(HBLANK(pipe),
4140 (adjusted_mode->crtc_hblank_start - 1) |
4141 ((adjusted_mode->crtc_hblank_end - 1) << 16));
4142 I915_WRITE(HSYNC(pipe),
4143 (adjusted_mode->crtc_hsync_start - 1) |
4144 ((adjusted_mode->crtc_hsync_end - 1) << 16));
4146 I915_WRITE(VTOTAL(pipe),
4147 (adjusted_mode->crtc_vdisplay - 1) |
4148 ((adjusted_mode->crtc_vtotal - 1) << 16));
4149 I915_WRITE(VBLANK(pipe),
4150 (adjusted_mode->crtc_vblank_start - 1) |
4151 ((adjusted_mode->crtc_vblank_end - 1) << 16));
4152 I915_WRITE(VSYNC(pipe),
4153 (adjusted_mode->crtc_vsync_start - 1) |
4154 ((adjusted_mode->crtc_vsync_end - 1) << 16));
4156 /* pipesrc and dspsize control the size that is scaled from,
4157 * which should always be the user's requested size.
4159 I915_WRITE(DSPSIZE(plane),
4160 ((mode->vdisplay - 1) << 16) |
4161 (mode->hdisplay - 1));
4162 I915_WRITE(DSPPOS(plane), 0);
4163 I915_WRITE(PIPESRC(pipe),
4164 ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
4166 I915_WRITE(PIPECONF(pipe), pipeconf);
4167 POSTING_READ(PIPECONF(pipe));
4168 intel_enable_pipe(dev_priv, pipe, false);
4170 intel_wait_for_vblank(dev, pipe);
4172 I915_WRITE(DSPCNTR(plane), dspcntr);
4173 POSTING_READ(DSPCNTR(plane));
4175 ret = intel_pipe_set_base(crtc, x, y, old_fb);
4177 intel_update_watermarks(dev);
4183 * Initialize reference clocks when the driver loads
4185 void ironlake_init_pch_refclk(struct drm_device *dev)
4187 struct drm_i915_private *dev_priv = dev->dev_private;
4188 struct drm_mode_config *mode_config = &dev->mode_config;
4189 struct intel_encoder *encoder;
4191 bool has_lvds = false;
4192 bool has_cpu_edp = false;
4193 bool has_pch_edp = false;
4194 bool has_panel = false;
4195 bool has_ck505 = false;
4196 bool can_ssc = false;
4198 /* We need to take the global config into account */
4199 list_for_each_entry(encoder, &mode_config->encoder_list,
4201 switch (encoder->type) {
4202 case INTEL_OUTPUT_LVDS:
4206 case INTEL_OUTPUT_EDP:
4208 if (intel_encoder_is_pch_edp(&encoder->base))
4216 if (HAS_PCH_IBX(dev)) {
4217 has_ck505 = dev_priv->display_clock_mode;
4218 can_ssc = has_ck505;
4224 DRM_DEBUG_KMS("has_panel %d has_lvds %d has_pch_edp %d has_cpu_edp %d has_ck505 %d\n",
4225 has_panel, has_lvds, has_pch_edp, has_cpu_edp,
4228 /* Ironlake: try to setup display ref clock before DPLL
4229 * enabling. This is only under driver's control after
4230 * PCH B stepping, previous chipset stepping should be
4231 * ignoring this setting.
4233 temp = I915_READ(PCH_DREF_CONTROL);
4234 /* Always enable nonspread source */
4235 temp &= ~DREF_NONSPREAD_SOURCE_MASK;
4238 temp |= DREF_NONSPREAD_CK505_ENABLE;
4240 temp |= DREF_NONSPREAD_SOURCE_ENABLE;
4243 temp &= ~DREF_SSC_SOURCE_MASK;
4244 temp |= DREF_SSC_SOURCE_ENABLE;
4246 /* SSC must be turned on before enabling the CPU output */
4247 if (intel_panel_use_ssc(dev_priv) && can_ssc) {
4248 DRM_DEBUG_KMS("Using SSC on panel\n");
4249 temp |= DREF_SSC1_ENABLE;
4251 temp &= ~DREF_SSC1_ENABLE;
4253 /* Get SSC going before enabling the outputs */
4254 I915_WRITE(PCH_DREF_CONTROL, temp);
4255 POSTING_READ(PCH_DREF_CONTROL);
4258 temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
4260 /* Enable CPU source on CPU attached eDP */
4262 if (intel_panel_use_ssc(dev_priv) && can_ssc) {
4263 DRM_DEBUG_KMS("Using SSC on eDP\n");
4264 temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
4267 temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
4269 temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
4271 I915_WRITE(PCH_DREF_CONTROL, temp);
4272 POSTING_READ(PCH_DREF_CONTROL);
4275 DRM_DEBUG_KMS("Disabling SSC entirely\n");
4277 temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
4279 /* Turn off CPU output */
4280 temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
4282 I915_WRITE(PCH_DREF_CONTROL, temp);
4283 POSTING_READ(PCH_DREF_CONTROL);
4286 /* Turn off the SSC source */
4287 temp &= ~DREF_SSC_SOURCE_MASK;
4288 temp |= DREF_SSC_SOURCE_DISABLE;
4291 temp &= ~ DREF_SSC1_ENABLE;
4293 I915_WRITE(PCH_DREF_CONTROL, temp);
4294 POSTING_READ(PCH_DREF_CONTROL);
4299 static int ironlake_get_refclk(struct drm_crtc *crtc)
4301 struct drm_device *dev = crtc->dev;
4302 struct drm_i915_private *dev_priv = dev->dev_private;
4303 struct intel_encoder *encoder;
4304 struct drm_mode_config *mode_config = &dev->mode_config;
4305 struct intel_encoder *edp_encoder = NULL;
4306 int num_connectors = 0;
4307 bool is_lvds = false;
4309 list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
4310 if (encoder->base.crtc != crtc)
4313 switch (encoder->type) {
4314 case INTEL_OUTPUT_LVDS:
4317 case INTEL_OUTPUT_EDP:
4318 edp_encoder = encoder;
4324 if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
4325 DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
4326 dev_priv->lvds_ssc_freq);
4327 return dev_priv->lvds_ssc_freq * 1000;
4333 static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
4334 struct drm_display_mode *mode,
4335 struct drm_display_mode *adjusted_mode,
4337 struct drm_framebuffer *old_fb)
4339 struct drm_device *dev = crtc->dev;
4340 struct drm_i915_private *dev_priv = dev->dev_private;
4341 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4342 int pipe = intel_crtc->pipe;
4343 int plane = intel_crtc->plane;
4344 int refclk, num_connectors = 0;
4345 intel_clock_t clock, reduced_clock;
4346 u32 dpll, fp = 0, fp2 = 0, dspcntr, pipeconf;
4347 bool ok, has_reduced_clock = false, is_sdvo = false;
4348 bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
4349 struct drm_mode_config *mode_config = &dev->mode_config;
4350 struct intel_encoder *encoder, *edp_encoder = NULL;
4351 const intel_limit_t *limit;
4353 struct fdi_m_n m_n = {0};
4355 int target_clock, pixel_multiplier, lane, link_bw, factor;
4356 unsigned int pipe_bpp;
4358 bool is_cpu_edp = false, is_pch_edp = false;
4360 list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
4361 if (encoder->base.crtc != crtc)
4364 switch (encoder->type) {
4365 case INTEL_OUTPUT_LVDS:
4368 case INTEL_OUTPUT_SDVO:
4369 case INTEL_OUTPUT_HDMI:
4371 if (encoder->needs_tv_clock)
4374 case INTEL_OUTPUT_TVOUT:
4377 case INTEL_OUTPUT_ANALOG:
4380 case INTEL_OUTPUT_DISPLAYPORT:
4383 case INTEL_OUTPUT_EDP:
4385 if (intel_encoder_is_pch_edp(&encoder->base))
4389 edp_encoder = encoder;
4396 refclk = ironlake_get_refclk(crtc);
4399 * Returns a set of divisors for the desired target clock with the given
4400 * refclk, or false. The returned values represent the clock equation:
4401 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
4403 limit = intel_limit(crtc, refclk);
4404 ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, NULL,
4407 DRM_ERROR("Couldn't find PLL settings for mode!\n");
4411 /* Ensure that the cursor is valid for the new mode before changing... */
4412 intel_crtc_update_cursor(crtc, true);
4414 if (is_lvds && dev_priv->lvds_downclock_avail) {
4416 * Ensure we match the reduced clock's P to the target clock.
4417 * If the clocks don't match, we can't switch the display clock
4418 * by using the FP0/FP1. In such case we will disable the LVDS
4419 * downclock feature.
4421 has_reduced_clock = limit->find_pll(limit, crtc,
4422 dev_priv->lvds_downclock,
4427 /* SDVO TV has fixed PLL values depend on its clock range,
4428 this mirrors vbios setting. */
4429 if (is_sdvo && is_tv) {
4430 if (adjusted_mode->clock >= 100000
4431 && adjusted_mode->clock < 140500) {
4437 } else if (adjusted_mode->clock >= 140500
4438 && adjusted_mode->clock <= 200000) {
4448 pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
4450 /* CPU eDP doesn't require FDI link, so just set DP M/N
4451 according to current link config */
4453 target_clock = mode->clock;
4454 intel_edp_link_config(edp_encoder, &lane, &link_bw);
4456 /* [e]DP over FDI requires target mode clock
4457 instead of link clock */
4459 target_clock = mode->clock;
4461 target_clock = adjusted_mode->clock;
4463 /* FDI is a binary signal running at ~2.7GHz, encoding
4464 * each output octet as 10 bits. The actual frequency
4465 * is stored as a divider into a 100MHz clock, and the
4466 * mode pixel clock is stored in units of 1KHz.
4467 * Hence the bw of each lane in terms of the mode signal
4470 link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
4473 /* determine panel color depth */
4474 temp = I915_READ(PIPECONF(pipe));
4475 temp &= ~PIPE_BPC_MASK;
4476 dither = intel_choose_pipe_bpp_dither(crtc, &pipe_bpp, mode);
4491 printf("intel_choose_pipe_bpp returned invalid value %d\n",
4498 intel_crtc->bpp = pipe_bpp;
4499 I915_WRITE(PIPECONF(pipe), temp);
4503 * Account for spread spectrum to avoid
4504 * oversubscribing the link. Max center spread
4505 * is 2.5%; use 5% for safety's sake.
4507 u32 bps = target_clock * intel_crtc->bpp * 21 / 20;
4508 lane = bps / (link_bw * 8) + 1;
4511 intel_crtc->fdi_lanes = lane;
4513 if (pixel_multiplier > 1)
4514 link_bw *= pixel_multiplier;
4515 ironlake_compute_m_n(intel_crtc->bpp, lane, target_clock, link_bw,
4518 fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
4519 if (has_reduced_clock)
4520 fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
4523 /* Enable autotuning of the PLL clock (if permissible) */
4526 if ((intel_panel_use_ssc(dev_priv) &&
4527 dev_priv->lvds_ssc_freq == 100) ||
4528 (I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP)
4530 } else if (is_sdvo && is_tv)
4533 if (clock.m < factor * clock.n)
4539 dpll |= DPLLB_MODE_LVDS;
4541 dpll |= DPLLB_MODE_DAC_SERIAL;
4543 int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
4544 if (pixel_multiplier > 1) {
4545 dpll |= (pixel_multiplier - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
4547 dpll |= DPLL_DVO_HIGH_SPEED;
4549 if (is_dp && !is_cpu_edp)
4550 dpll |= DPLL_DVO_HIGH_SPEED;
4552 /* compute bitmask from p1 value */
4553 dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
4555 dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
4559 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
4562 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
4565 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
4568 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
4572 if (is_sdvo && is_tv)
4573 dpll |= PLL_REF_INPUT_TVCLKINBC;
4575 /* XXX: just matching BIOS for now */
4576 /* dpll |= PLL_REF_INPUT_TVCLKINBC; */
4578 else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
4579 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
4581 dpll |= PLL_REF_INPUT_DREFCLK;
4583 /* setup pipeconf */
4584 pipeconf = I915_READ(PIPECONF(pipe));
4586 /* Set up the display plane register */
4587 dspcntr = DISPPLANE_GAMMA_ENABLE;
4588 DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
4589 drm_mode_debug_printmodeline(mode);
4591 /* CPU eDP is the only output that doesn't need a PCH PLL of its own on
4592 * pre-Haswell/LPT generation */
4593 if (HAS_PCH_LPT(dev)) {
4594 DRM_DEBUG_KMS("LPT detected: no PLL for pipe %d necessary\n",
4596 } else if (!is_cpu_edp) {
4597 struct intel_pch_pll *pll;
4599 pll = intel_get_pch_pll(intel_crtc, dpll, fp);
4601 DRM_DEBUG_DRIVER("failed to find PLL for pipe %d\n",
4606 intel_put_pch_pll(intel_crtc);
4608 /* The LVDS pin pair needs to be on before the DPLLs are enabled.
4609 * This is an exception to the general rule that mode_set doesn't turn
4613 temp = I915_READ(PCH_LVDS);
4614 temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
4615 if (HAS_PCH_CPT(dev)) {
4616 temp &= ~PORT_TRANS_SEL_MASK;
4617 temp |= PORT_TRANS_SEL_CPT(pipe);
4620 temp |= LVDS_PIPEB_SELECT;
4622 temp &= ~LVDS_PIPEB_SELECT;
4625 /* set the corresponsding LVDS_BORDER bit */
4626 temp |= dev_priv->lvds_border_bits;
4627 /* Set the B0-B3 data pairs corresponding to whether we're going to
4628 * set the DPLLs for dual-channel mode or not.
4631 temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
4633 temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
4635 /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
4636 * appropriately here, but we need to look more thoroughly into how
4637 * panels behave in the two modes.
4639 temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
4640 if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
4641 temp |= LVDS_HSYNC_POLARITY;
4642 if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
4643 temp |= LVDS_VSYNC_POLARITY;
4644 I915_WRITE(PCH_LVDS, temp);
4647 pipeconf &= ~PIPECONF_DITHER_EN;
4648 pipeconf &= ~PIPECONF_DITHER_TYPE_MASK;
4649 if ((is_lvds && dev_priv->lvds_dither) || dither) {
4650 pipeconf |= PIPECONF_DITHER_EN;
4651 pipeconf |= PIPECONF_DITHER_TYPE_SP;
4653 if (is_dp && !is_cpu_edp) {
4654 intel_dp_set_m_n(crtc, mode, adjusted_mode);
4656 /* For non-DP output, clear any trans DP clock recovery setting.*/
4657 I915_WRITE(TRANSDATA_M1(pipe), 0);
4658 I915_WRITE(TRANSDATA_N1(pipe), 0);
4659 I915_WRITE(TRANSDPLINK_M1(pipe), 0);
4660 I915_WRITE(TRANSDPLINK_N1(pipe), 0);
4663 if (intel_crtc->pch_pll) {
4664 I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
4666 /* Wait for the clocks to stabilize. */
4667 POSTING_READ(intel_crtc->pch_pll->pll_reg);
4670 /* The pixel multiplier can only be updated once the
4671 * DPLL is enabled and the clocks are stable.
4673 * So write it again.
4675 I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
4678 intel_crtc->lowfreq_avail = false;
4679 if (intel_crtc->pch_pll) {
4680 if (is_lvds && has_reduced_clock && i915_powersave) {
4681 I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp2);
4682 intel_crtc->lowfreq_avail = true;
4683 if (HAS_PIPE_CXSR(dev)) {
4684 DRM_DEBUG_KMS("enabling CxSR downclocking\n");
4685 pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
4688 I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp);
4689 if (HAS_PIPE_CXSR(dev)) {
4690 DRM_DEBUG_KMS("disabling CxSR downclocking\n");
4691 pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
4696 pipeconf &= ~PIPECONF_INTERLACE_MASK;
4697 if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
4698 pipeconf |= PIPECONF_INTERLACED_ILK;
4699 /* the chip adds 2 halflines automatically */
4700 adjusted_mode->crtc_vtotal -= 1;
4701 adjusted_mode->crtc_vblank_end -= 1;
4702 I915_WRITE(VSYNCSHIFT(pipe),
4703 adjusted_mode->crtc_hsync_start
4704 - adjusted_mode->crtc_htotal/2);
4706 pipeconf |= PIPECONF_PROGRESSIVE;
4707 I915_WRITE(VSYNCSHIFT(pipe), 0);
4710 I915_WRITE(HTOTAL(pipe),
4711 (adjusted_mode->crtc_hdisplay - 1) |
4712 ((adjusted_mode->crtc_htotal - 1) << 16));
4713 I915_WRITE(HBLANK(pipe),
4714 (adjusted_mode->crtc_hblank_start - 1) |
4715 ((adjusted_mode->crtc_hblank_end - 1) << 16));
4716 I915_WRITE(HSYNC(pipe),
4717 (adjusted_mode->crtc_hsync_start - 1) |
4718 ((adjusted_mode->crtc_hsync_end - 1) << 16));
4720 I915_WRITE(VTOTAL(pipe),
4721 (adjusted_mode->crtc_vdisplay - 1) |
4722 ((adjusted_mode->crtc_vtotal - 1) << 16));
4723 I915_WRITE(VBLANK(pipe),
4724 (adjusted_mode->crtc_vblank_start - 1) |
4725 ((adjusted_mode->crtc_vblank_end - 1) << 16));
4726 I915_WRITE(VSYNC(pipe),
4727 (adjusted_mode->crtc_vsync_start - 1) |
4728 ((adjusted_mode->crtc_vsync_end - 1) << 16));
4730 /* pipesrc controls the size that is scaled from, which should
4731 * always be the user's requested size.
4733 I915_WRITE(PIPESRC(pipe),
4734 ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
4736 I915_WRITE(PIPE_DATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m);
4737 I915_WRITE(PIPE_DATA_N1(pipe), m_n.gmch_n);
4738 I915_WRITE(PIPE_LINK_M1(pipe), m_n.link_m);
4739 I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n);
4742 ironlake_set_pll_edp(crtc, adjusted_mode->clock);
4744 I915_WRITE(PIPECONF(pipe), pipeconf);
4745 POSTING_READ(PIPECONF(pipe));
4747 intel_wait_for_vblank(dev, pipe);
4749 I915_WRITE(DSPCNTR(plane), dspcntr);
4750 POSTING_READ(DSPCNTR(plane));
4752 ret = intel_pipe_set_base(crtc, x, y, old_fb);
4754 intel_update_watermarks(dev);
4756 intel_update_linetime_watermarks(dev, pipe, adjusted_mode);
4761 static int intel_crtc_mode_set(struct drm_crtc *crtc,
4762 struct drm_display_mode *mode,
4763 struct drm_display_mode *adjusted_mode,
4765 struct drm_framebuffer *old_fb)
4767 struct drm_device *dev = crtc->dev;
4768 struct drm_i915_private *dev_priv = dev->dev_private;
4769 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4770 int pipe = intel_crtc->pipe;
4773 drm_vblank_pre_modeset(dev, pipe);
4775 ret = dev_priv->display.crtc_mode_set(crtc, mode, adjusted_mode,
4777 drm_vblank_post_modeset(dev, pipe);
4780 intel_crtc->dpms_mode = DRM_MODE_DPMS_OFF;
4782 intel_crtc->dpms_mode = DRM_MODE_DPMS_ON;
4787 static bool intel_eld_uptodate(struct drm_connector *connector,
4788 int reg_eldv, uint32_t bits_eldv,
4789 int reg_elda, uint32_t bits_elda,
4792 struct drm_i915_private *dev_priv = connector->dev->dev_private;
4793 uint8_t *eld = connector->eld;
4796 i = I915_READ(reg_eldv);
4805 i = I915_READ(reg_elda);
4807 I915_WRITE(reg_elda, i);
4809 for (i = 0; i < eld[2]; i++)
4810 if (I915_READ(reg_edid) != *((uint32_t *)eld + i))
4816 static void g4x_write_eld(struct drm_connector *connector,
4817 struct drm_crtc *crtc)
4819 struct drm_i915_private *dev_priv = connector->dev->dev_private;
4820 uint8_t *eld = connector->eld;
4825 i = I915_READ(G4X_AUD_VID_DID);
4827 if (i == INTEL_AUDIO_DEVBLC || i == INTEL_AUDIO_DEVCL)
4828 eldv = G4X_ELDV_DEVCL_DEVBLC;
4830 eldv = G4X_ELDV_DEVCTG;
4832 if (intel_eld_uptodate(connector,
4833 G4X_AUD_CNTL_ST, eldv,
4834 G4X_AUD_CNTL_ST, G4X_ELD_ADDR,
4835 G4X_HDMIW_HDMIEDID))
4838 i = I915_READ(G4X_AUD_CNTL_ST);
4839 i &= ~(eldv | G4X_ELD_ADDR);
4840 len = (i >> 9) & 0x1f; /* ELD buffer size */
4841 I915_WRITE(G4X_AUD_CNTL_ST, i);
4846 if (eld[2] < (uint8_t)len)
4848 DRM_DEBUG_KMS("ELD size %d\n", len);
4849 for (i = 0; i < len; i++)
4850 I915_WRITE(G4X_HDMIW_HDMIEDID, *((uint32_t *)eld + i));
4852 i = I915_READ(G4X_AUD_CNTL_ST);
4854 I915_WRITE(G4X_AUD_CNTL_ST, i);
4857 static void ironlake_write_eld(struct drm_connector *connector,
4858 struct drm_crtc *crtc)
4860 struct drm_i915_private *dev_priv = connector->dev->dev_private;
4861 uint8_t *eld = connector->eld;
4870 if (HAS_PCH_IBX(connector->dev)) {
4871 hdmiw_hdmiedid = IBX_HDMIW_HDMIEDID_A;
4872 aud_config = IBX_AUD_CONFIG_A;
4873 aud_cntl_st = IBX_AUD_CNTL_ST_A;
4874 aud_cntrl_st2 = IBX_AUD_CNTL_ST2;
4876 hdmiw_hdmiedid = CPT_HDMIW_HDMIEDID_A;
4877 aud_config = CPT_AUD_CONFIG_A;
4878 aud_cntl_st = CPT_AUD_CNTL_ST_A;
4879 aud_cntrl_st2 = CPT_AUD_CNTRL_ST2;
4882 i = to_intel_crtc(crtc)->pipe;
4883 hdmiw_hdmiedid += i * 0x100;
4884 aud_cntl_st += i * 0x100;
4885 aud_config += i * 0x100;
4887 DRM_DEBUG_KMS("ELD on pipe %c\n", pipe_name(i));
4889 i = I915_READ(aud_cntl_st);
4890 i = (i >> 29) & 0x3; /* DIP_Port_Select, 0x1 = PortB */
4892 DRM_DEBUG_KMS("Audio directed to unknown port\n");
4893 /* operate blindly on all ports */
4894 eldv = IBX_ELD_VALIDB;
4895 eldv |= IBX_ELD_VALIDB << 4;
4896 eldv |= IBX_ELD_VALIDB << 8;
4898 DRM_DEBUG_KMS("ELD on port %c\n", 'A' + i);
4899 eldv = IBX_ELD_VALIDB << ((i - 1) * 4);
4902 if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
4903 DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n");
4904 eld[5] |= (1 << 2); /* Conn_Type, 0x1 = DisplayPort */
4905 I915_WRITE(aud_config, AUD_CONFIG_N_VALUE_INDEX); /* 0x1 = DP */
4907 I915_WRITE(aud_config, 0);
4909 if (intel_eld_uptodate(connector,
4910 aud_cntrl_st2, eldv,
4911 aud_cntl_st, IBX_ELD_ADDRESS,
4915 i = I915_READ(aud_cntrl_st2);
4917 I915_WRITE(aud_cntrl_st2, i);
4922 i = I915_READ(aud_cntl_st);
4923 i &= ~IBX_ELD_ADDRESS;
4924 I915_WRITE(aud_cntl_st, i);
4926 /* 84 bytes of hw ELD buffer */
4928 if (eld[2] < (uint8_t)len)
4930 DRM_DEBUG_KMS("ELD size %d\n", len);
4931 for (i = 0; i < len; i++)
4932 I915_WRITE(hdmiw_hdmiedid, *((uint32_t *)eld + i));
4934 i = I915_READ(aud_cntrl_st2);
4936 I915_WRITE(aud_cntrl_st2, i);
4939 void intel_write_eld(struct drm_encoder *encoder,
4940 struct drm_display_mode *mode)
4942 struct drm_crtc *crtc = encoder->crtc;
4943 struct drm_connector *connector;
4944 struct drm_device *dev = encoder->dev;
4945 struct drm_i915_private *dev_priv = dev->dev_private;
4947 connector = drm_select_eld(encoder, mode);
4951 DRM_DEBUG_KMS("ELD on [CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
4953 drm_get_connector_name(connector),
4954 connector->encoder->base.id,
4955 drm_get_encoder_name(connector->encoder));
4957 connector->eld[6] = drm_av_sync_delay(connector, mode) / 2;
4959 if (dev_priv->display.write_eld)
4960 dev_priv->display.write_eld(connector, crtc);
4963 /** Loads the palette/gamma unit for the CRTC with the prepared values */
4964 void intel_crtc_load_lut(struct drm_crtc *crtc)
4966 struct drm_device *dev = crtc->dev;
4967 struct drm_i915_private *dev_priv = dev->dev_private;
4968 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4969 int palreg = PALETTE(intel_crtc->pipe);
4972 /* The clocks have to be on to load the palette. */
4973 if (!crtc->enabled || !intel_crtc->active)
4976 /* use legacy palette for Ironlake */
4977 if (HAS_PCH_SPLIT(dev))
4978 palreg = LGC_PALETTE(intel_crtc->pipe);
4980 for (i = 0; i < 256; i++) {
4981 I915_WRITE(palreg + 4 * i,
4982 (intel_crtc->lut_r[i] << 16) |
4983 (intel_crtc->lut_g[i] << 8) |
4984 intel_crtc->lut_b[i]);
4988 static void i845_update_cursor(struct drm_crtc *crtc, u32 base)
4990 struct drm_device *dev = crtc->dev;
4991 struct drm_i915_private *dev_priv = dev->dev_private;
4992 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4993 bool visible = base != 0;
4996 if (intel_crtc->cursor_visible == visible)
4999 cntl = I915_READ(_CURACNTR);
5001 /* On these chipsets we can only modify the base whilst
5002 * the cursor is disabled.
5004 I915_WRITE(_CURABASE, base);
5006 cntl &= ~(CURSOR_FORMAT_MASK);
5007 /* XXX width must be 64, stride 256 => 0x00 << 28 */
5008 cntl |= CURSOR_ENABLE |
5009 CURSOR_GAMMA_ENABLE |
5012 cntl &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE);
5013 I915_WRITE(_CURACNTR, cntl);
5015 intel_crtc->cursor_visible = visible;
5018 static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
5020 struct drm_device *dev = crtc->dev;
5021 struct drm_i915_private *dev_priv = dev->dev_private;
5022 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5023 int pipe = intel_crtc->pipe;
5024 bool visible = base != 0;
5026 if (intel_crtc->cursor_visible != visible) {
5027 uint32_t cntl = I915_READ(CURCNTR(pipe));
5029 cntl &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT);
5030 cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
5031 cntl |= pipe << 28; /* Connect to correct pipe */
5033 cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
5034 cntl |= CURSOR_MODE_DISABLE;
5036 I915_WRITE(CURCNTR(pipe), cntl);
5038 intel_crtc->cursor_visible = visible;
5040 /* and commit changes on next vblank */
5041 I915_WRITE(CURBASE(pipe), base);
5044 static void ivb_update_cursor(struct drm_crtc *crtc, u32 base)
5046 struct drm_device *dev = crtc->dev;
5047 struct drm_i915_private *dev_priv = dev->dev_private;
5048 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5049 int pipe = intel_crtc->pipe;
5050 bool visible = base != 0;
5052 if (intel_crtc->cursor_visible != visible) {
5053 uint32_t cntl = I915_READ(CURCNTR_IVB(pipe));
5055 cntl &= ~CURSOR_MODE;
5056 cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
5058 cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
5059 cntl |= CURSOR_MODE_DISABLE;
5061 I915_WRITE(CURCNTR_IVB(pipe), cntl);
5063 intel_crtc->cursor_visible = visible;
5065 /* and commit changes on next vblank */
5066 I915_WRITE(CURBASE_IVB(pipe), base);
5069 /* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */
5070 static void intel_crtc_update_cursor(struct drm_crtc *crtc,
5073 struct drm_device *dev = crtc->dev;
5074 struct drm_i915_private *dev_priv = dev->dev_private;
5075 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5076 int pipe = intel_crtc->pipe;
5077 int x = intel_crtc->cursor_x;
5078 int y = intel_crtc->cursor_y;
5084 if (on && crtc->enabled && crtc->fb) {
5085 base = intel_crtc->cursor_addr;
5086 if (x > (int) crtc->fb->width)
5089 if (y > (int) crtc->fb->height)
5095 if (x + intel_crtc->cursor_width < 0)
5098 pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
5101 pos |= x << CURSOR_X_SHIFT;
5104 if (y + intel_crtc->cursor_height < 0)
5107 pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
5110 pos |= y << CURSOR_Y_SHIFT;
5112 visible = base != 0;
5113 if (!visible && !intel_crtc->cursor_visible)
5116 if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) {
5117 I915_WRITE(CURPOS_IVB(pipe), pos);
5118 ivb_update_cursor(crtc, base);
5120 I915_WRITE(CURPOS(pipe), pos);
5121 if (IS_845G(dev) || IS_I865G(dev))
5122 i845_update_cursor(crtc, base);
5124 i9xx_update_cursor(crtc, base);
5128 static int intel_crtc_cursor_set(struct drm_crtc *crtc,
5129 struct drm_file *file,
5131 uint32_t width, uint32_t height)
5133 struct drm_device *dev = crtc->dev;
5134 struct drm_i915_private *dev_priv = dev->dev_private;
5135 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5136 struct drm_i915_gem_object *obj;
5140 DRM_DEBUG_KMS("\n");
5142 /* if we want to turn off the cursor ignore width and height */
5144 DRM_DEBUG_KMS("cursor off\n");
5151 /* Currently we only support 64x64 cursors */
5152 if (width != 64 || height != 64) {
5153 DRM_ERROR("we currently only support 64x64 cursors\n");
5157 obj = to_intel_bo(drm_gem_object_lookup(dev, file, handle));
5158 if (&obj->base == NULL)
5161 if (obj->base.size < width * height * 4) {
5162 DRM_ERROR("buffer is to small\n");
5167 /* we only need to pin inside GTT if cursor is non-phy */
5169 if (!dev_priv->info->cursor_needs_physical) {
5170 if (obj->tiling_mode) {
5171 DRM_ERROR("cursor cannot be tiled\n");
5176 ret = i915_gem_object_pin_to_display_plane(obj, 0, NULL);
5178 DRM_ERROR("failed to move cursor bo into the GTT\n");
5182 ret = i915_gem_object_put_fence(obj);
5184 DRM_ERROR("failed to release fence for cursor\n");
5188 addr = obj->gtt_offset;
5190 int align = IS_I830(dev) ? 16 * 1024 : 256;
5191 ret = i915_gem_attach_phys_object(dev, obj,
5192 (intel_crtc->pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1,
5195 DRM_ERROR("failed to attach phys object\n");
5198 addr = obj->phys_obj->handle->busaddr;
5202 I915_WRITE(CURSIZE, (height << 12) | width);
5205 if (intel_crtc->cursor_bo) {
5206 if (dev_priv->info->cursor_needs_physical) {
5207 if (intel_crtc->cursor_bo != obj)
5208 i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo);
5210 i915_gem_object_unpin_from_display_plane(intel_crtc->cursor_bo);
5211 drm_gem_object_unreference(&intel_crtc->cursor_bo->base);
5216 intel_crtc->cursor_addr = addr;
5217 intel_crtc->cursor_bo = obj;
5218 intel_crtc->cursor_width = width;
5219 intel_crtc->cursor_height = height;
5221 intel_crtc_update_cursor(crtc, true);
5225 i915_gem_object_unpin_from_display_plane(obj);
5229 drm_gem_object_unreference_unlocked(&obj->base);
5233 static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
5235 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5237 intel_crtc->cursor_x = x;
5238 intel_crtc->cursor_y = y;
5240 intel_crtc_update_cursor(crtc, true);
5245 /** Sets the color ramps on behalf of RandR */
5246 void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
5247 u16 blue, int regno)
5249 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5251 intel_crtc->lut_r[regno] = red >> 8;
5252 intel_crtc->lut_g[regno] = green >> 8;
5253 intel_crtc->lut_b[regno] = blue >> 8;
5256 void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
5257 u16 *blue, int regno)
5259 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5261 *red = intel_crtc->lut_r[regno] << 8;
5262 *green = intel_crtc->lut_g[regno] << 8;
5263 *blue = intel_crtc->lut_b[regno] << 8;
5266 static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
5267 u16 *blue, uint32_t start, uint32_t size)
5269 int end = (start + size > 256) ? 256 : start + size, i;
5270 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5272 for (i = start; i < end; i++) {
5273 intel_crtc->lut_r[i] = red[i] >> 8;
5274 intel_crtc->lut_g[i] = green[i] >> 8;
5275 intel_crtc->lut_b[i] = blue[i] >> 8;
5278 intel_crtc_load_lut(crtc);
5282 * Get a pipe with a simple mode set on it for doing load-based monitor
5285 * It will be up to the load-detect code to adjust the pipe as appropriate for
5286 * its requirements. The pipe will be connected to no other encoders.
5288 * Currently this code will only succeed if there is a pipe with no encoders
5289 * configured for it. In the future, it could choose to temporarily disable
5290 * some outputs to free up a pipe for its use.
5292 * \return crtc, or NULL if no pipes are available.
5295 /* VESA 640x480x72Hz mode to set on the pipe */
5296 static struct drm_display_mode load_detect_mode = {
5297 DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664,
5298 704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
5302 intel_framebuffer_create(struct drm_device *dev,
5303 struct drm_mode_fb_cmd2 *mode_cmd,
5304 struct drm_i915_gem_object *obj,
5305 struct drm_framebuffer **res)
5307 struct intel_framebuffer *intel_fb;
5310 intel_fb = malloc(sizeof(*intel_fb), DRM_MEM_KMS, M_WAITOK | M_ZERO);
5311 ret = intel_framebuffer_init(dev, intel_fb, mode_cmd, obj);
5313 drm_gem_object_unreference_unlocked(&obj->base);
5314 free(intel_fb, DRM_MEM_KMS);
5318 *res = &intel_fb->base;
5323 intel_framebuffer_pitch_for_width(int width, int bpp)
5325 u32 pitch = howmany(width * bpp, 8);
5326 return roundup2(pitch, 64);
5330 intel_framebuffer_size_for_mode(struct drm_display_mode *mode, int bpp)
5332 u32 pitch = intel_framebuffer_pitch_for_width(mode->hdisplay, bpp);
5333 return roundup2(pitch * mode->vdisplay, PAGE_SIZE);
5337 intel_framebuffer_create_for_mode(struct drm_device *dev,
5338 struct drm_display_mode *mode,
5340 struct drm_framebuffer **res)
5342 struct drm_i915_gem_object *obj;
5343 struct drm_mode_fb_cmd2 mode_cmd = { 0 };
5345 obj = i915_gem_alloc_object(dev,
5346 intel_framebuffer_size_for_mode(mode, bpp));
5350 mode_cmd.width = mode->hdisplay;
5351 mode_cmd.height = mode->vdisplay;
5352 mode_cmd.pitches[0] = intel_framebuffer_pitch_for_width(mode_cmd.width,
5354 mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth);
5356 return intel_framebuffer_create(dev, &mode_cmd, obj, res);
5360 mode_fits_in_fbdev(struct drm_device *dev,
5361 struct drm_display_mode *mode,
5362 struct drm_framebuffer **res)
5364 struct drm_i915_private *dev_priv = dev->dev_private;
5365 struct drm_i915_gem_object *obj;
5366 struct drm_framebuffer *fb;
5368 if (dev_priv->fbdev == NULL) {
5373 obj = dev_priv->fbdev->ifb.obj;
5379 fb = &dev_priv->fbdev->ifb.base;
5380 if (fb->pitches[0] < intel_framebuffer_pitch_for_width(mode->hdisplay,
5381 fb->bits_per_pixel)) {
5386 if (obj->base.size < mode->vdisplay * fb->pitches[0]) {
5395 bool intel_get_load_detect_pipe(struct intel_encoder *intel_encoder,
5396 struct drm_connector *connector,
5397 struct drm_display_mode *mode,
5398 struct intel_load_detect_pipe *old)
5400 struct intel_crtc *intel_crtc;
5401 struct drm_crtc *possible_crtc;
5402 struct drm_encoder *encoder = &intel_encoder->base;
5403 struct drm_crtc *crtc = NULL;
5404 struct drm_device *dev = encoder->dev;
5405 struct drm_framebuffer *old_fb;
5409 DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
5410 connector->base.id, drm_get_connector_name(connector),
5411 encoder->base.id, drm_get_encoder_name(encoder));
5414 * Algorithm gets a little messy:
5416 * - if the connector already has an assigned crtc, use it (but make
5417 * sure it's on first)
5419 * - try to find the first unused crtc that can drive this connector,
5420 * and use that if we find one
5423 /* See if we already have a CRTC for this connector */
5424 if (encoder->crtc) {
5425 crtc = encoder->crtc;
5427 intel_crtc = to_intel_crtc(crtc);
5428 old->dpms_mode = intel_crtc->dpms_mode;
5429 old->load_detect_temp = false;
5431 /* Make sure the crtc and connector are running */
5432 if (intel_crtc->dpms_mode != DRM_MODE_DPMS_ON) {
5433 struct drm_encoder_helper_funcs *encoder_funcs;
5434 struct drm_crtc_helper_funcs *crtc_funcs;
5436 crtc_funcs = crtc->helper_private;
5437 crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
5439 encoder_funcs = encoder->helper_private;
5440 encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
5446 /* Find an unused one (if possible) */
5447 list_for_each_entry(possible_crtc, &dev->mode_config.crtc_list, head) {
5449 if (!(encoder->possible_crtcs & (1 << i)))
5451 if (!possible_crtc->enabled) {
5452 crtc = possible_crtc;
5458 * If we didn't find an unused CRTC, don't use any.
5461 DRM_DEBUG_KMS("no pipe available for load-detect\n");
5465 encoder->crtc = crtc;
5466 connector->encoder = encoder;
5468 intel_crtc = to_intel_crtc(crtc);
5469 old->dpms_mode = intel_crtc->dpms_mode;
5470 old->load_detect_temp = true;
5471 old->release_fb = NULL;
5474 mode = &load_detect_mode;
5478 /* We need a framebuffer large enough to accommodate all accesses
5479 * that the plane may generate whilst we perform load detection.
5480 * We can not rely on the fbcon either being present (we get called
5481 * during its initialisation to detect all boot displays, or it may
5482 * not even exist) or that it is large enough to satisfy the
5485 ret = mode_fits_in_fbdev(dev, mode, &crtc->fb);
5486 if (crtc->fb == NULL) {
5487 DRM_DEBUG_KMS("creating tmp fb for load-detection\n");
5488 ret = intel_framebuffer_create_for_mode(dev, mode, 24, 32,
5490 old->release_fb = crtc->fb;
5492 DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n");
5494 DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n");
5499 if (!drm_crtc_helper_set_mode(crtc, mode, 0, 0, old_fb)) {
5500 DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
5501 if (old->release_fb)
5502 old->release_fb->funcs->destroy(old->release_fb);
5507 /* let the connector get through one full cycle before testing */
5508 intel_wait_for_vblank(dev, intel_crtc->pipe);
5512 void intel_release_load_detect_pipe(struct intel_encoder *intel_encoder,
5513 struct drm_connector *connector,
5514 struct intel_load_detect_pipe *old)
5516 struct drm_encoder *encoder = &intel_encoder->base;
5517 struct drm_device *dev = encoder->dev;
5518 struct drm_crtc *crtc = encoder->crtc;
5519 struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
5520 struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
5522 DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
5523 connector->base.id, drm_get_connector_name(connector),
5524 encoder->base.id, drm_get_encoder_name(encoder));
5526 if (old->load_detect_temp) {
5527 connector->encoder = NULL;
5528 drm_helper_disable_unused_functions(dev);
5530 if (old->release_fb)
5531 old->release_fb->funcs->destroy(old->release_fb);
5536 /* Switch crtc and encoder back off if necessary */
5537 if (old->dpms_mode != DRM_MODE_DPMS_ON) {
5538 encoder_funcs->dpms(encoder, old->dpms_mode);
5539 crtc_funcs->dpms(crtc, old->dpms_mode);
5543 /* Returns the clock of the currently programmed mode of the given pipe. */
5544 static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc)
5546 struct drm_i915_private *dev_priv = dev->dev_private;
5547 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5548 int pipe = intel_crtc->pipe;
5549 u32 dpll = I915_READ(DPLL(pipe));
5551 intel_clock_t clock;
5553 if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
5554 fp = I915_READ(FP0(pipe));
5556 fp = I915_READ(FP1(pipe));
5558 clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
5559 if (IS_PINEVIEW(dev)) {
5560 clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1;
5561 clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT;
5563 clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
5564 clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
5567 if (!IS_GEN2(dev)) {
5568 if (IS_PINEVIEW(dev))
5569 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >>
5570 DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW);
5572 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >>
5573 DPLL_FPA01_P1_POST_DIV_SHIFT);
5575 switch (dpll & DPLL_MODE_MASK) {
5576 case DPLLB_MODE_DAC_SERIAL:
5577 clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ?
5580 case DPLLB_MODE_LVDS:
5581 clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ?
5585 DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed "
5586 "mode\n", (int)(dpll & DPLL_MODE_MASK));
5590 /* XXX: Handle the 100Mhz refclk */
5591 intel_clock(dev, 96000, &clock);
5593 bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN);
5596 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
5597 DPLL_FPA01_P1_POST_DIV_SHIFT);
5600 if ((dpll & PLL_REF_INPUT_MASK) ==
5601 PLLB_REF_INPUT_SPREADSPECTRUMIN) {
5602 /* XXX: might not be 66MHz */
5603 intel_clock(dev, 66000, &clock);
5605 intel_clock(dev, 48000, &clock);
5607 if (dpll & PLL_P1_DIVIDE_BY_TWO)
5610 clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
5611 DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
5613 if (dpll & PLL_P2_DIVIDE_BY_4)
5618 intel_clock(dev, 48000, &clock);
5622 /* XXX: It would be nice to validate the clocks, but we can't reuse
5623 * i830PllIsValid() because it relies on the xf86_config connector
5624 * configuration being accurate, which it isn't necessarily.
5630 /** Returns the currently programmed mode of the given pipe. */
5631 struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
5632 struct drm_crtc *crtc)
5634 struct drm_i915_private *dev_priv = dev->dev_private;
5635 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5636 int pipe = intel_crtc->pipe;
5637 struct drm_display_mode *mode;
5638 int htot = I915_READ(HTOTAL(pipe));
5639 int hsync = I915_READ(HSYNC(pipe));
5640 int vtot = I915_READ(VTOTAL(pipe));
5641 int vsync = I915_READ(VSYNC(pipe));
5643 mode = malloc(sizeof(*mode), DRM_MEM_KMS, M_WAITOK | M_ZERO);
5645 mode->clock = intel_crtc_clock_get(dev, crtc);
5646 mode->hdisplay = (htot & 0xffff) + 1;
5647 mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
5648 mode->hsync_start = (hsync & 0xffff) + 1;
5649 mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
5650 mode->vdisplay = (vtot & 0xffff) + 1;
5651 mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
5652 mode->vsync_start = (vsync & 0xffff) + 1;
5653 mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
5655 drm_mode_set_name(mode);
5660 #define GPU_IDLE_TIMEOUT (500 /* ms */ * 1000 / hz)
5662 /* When this timer fires, we've been idle for awhile */
5663 static void intel_gpu_idle_timer(void *arg)
5665 struct drm_device *dev = arg;
5666 drm_i915_private_t *dev_priv = dev->dev_private;
5668 if (!list_empty(&dev_priv->mm.active_list)) {
5669 /* Still processing requests, so just re-arm the timer. */
5670 callout_schedule(&dev_priv->idle_callout, GPU_IDLE_TIMEOUT);
5674 dev_priv->busy = false;
5675 taskqueue_enqueue(dev_priv->tq, &dev_priv->idle_task);
5678 #define CRTC_IDLE_TIMEOUT (1000 /* ms */ * 1000 / hz)
5680 static void intel_crtc_idle_timer(void *arg)
5682 struct intel_crtc *intel_crtc = arg;
5683 struct drm_crtc *crtc = &intel_crtc->base;
5684 drm_i915_private_t *dev_priv = crtc->dev->dev_private;
5685 struct intel_framebuffer *intel_fb;
5687 intel_fb = to_intel_framebuffer(crtc->fb);
5688 if (intel_fb && intel_fb->obj->active) {
5689 /* The framebuffer is still being accessed by the GPU. */
5690 callout_schedule(&intel_crtc->idle_callout, CRTC_IDLE_TIMEOUT);
5694 intel_crtc->busy = false;
5695 taskqueue_enqueue(dev_priv->tq, &dev_priv->idle_task);
5698 static void intel_increase_pllclock(struct drm_crtc *crtc)
5700 struct drm_device *dev = crtc->dev;
5701 drm_i915_private_t *dev_priv = dev->dev_private;
5702 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5703 int pipe = intel_crtc->pipe;
5704 int dpll_reg = DPLL(pipe);
5707 if (HAS_PCH_SPLIT(dev))
5710 if (!dev_priv->lvds_downclock_avail)
5713 dpll = I915_READ(dpll_reg);
5714 if (!HAS_PIPE_CXSR(dev) && (dpll & DISPLAY_RATE_SELECT_FPA1)) {
5715 DRM_DEBUG_DRIVER("upclocking LVDS\n");
5717 assert_panel_unlocked(dev_priv, pipe);
5719 dpll &= ~DISPLAY_RATE_SELECT_FPA1;
5720 I915_WRITE(dpll_reg, dpll);
5721 intel_wait_for_vblank(dev, pipe);
5723 dpll = I915_READ(dpll_reg);
5724 if (dpll & DISPLAY_RATE_SELECT_FPA1)
5725 DRM_DEBUG_DRIVER("failed to upclock LVDS!\n");
5728 /* Schedule downclock */
5729 callout_reset(&intel_crtc->idle_callout, CRTC_IDLE_TIMEOUT,
5730 intel_crtc_idle_timer, intel_crtc);
5733 static void intel_decrease_pllclock(struct drm_crtc *crtc)
5735 struct drm_device *dev = crtc->dev;
5736 drm_i915_private_t *dev_priv = dev->dev_private;
5737 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5739 if (HAS_PCH_SPLIT(dev))
5742 if (!dev_priv->lvds_downclock_avail)
5746 * Since this is called by a timer, we should never get here in
5749 if (!HAS_PIPE_CXSR(dev) && intel_crtc->lowfreq_avail) {
5750 int pipe = intel_crtc->pipe;
5751 int dpll_reg = DPLL(pipe);
5754 DRM_DEBUG_DRIVER("downclocking LVDS\n");
5756 assert_panel_unlocked(dev_priv, pipe);
5758 dpll = I915_READ(dpll_reg);
5759 dpll |= DISPLAY_RATE_SELECT_FPA1;
5760 I915_WRITE(dpll_reg, dpll);
5761 intel_wait_for_vblank(dev, pipe);
5762 dpll = I915_READ(dpll_reg);
5763 if (!(dpll & DISPLAY_RATE_SELECT_FPA1))
5764 DRM_DEBUG_DRIVER("failed to downclock LVDS!\n");
5770 * intel_idle_update - adjust clocks for idleness
5771 * @work: work struct
5773 * Either the GPU or display (or both) went idle. Check the busy status
5774 * here and adjust the CRTC and GPU clocks as necessary.
5776 static void intel_idle_update(void *arg, int pending)
5778 drm_i915_private_t *dev_priv = arg;
5779 struct drm_device *dev = dev_priv->dev;
5780 struct drm_crtc *crtc;
5781 struct intel_crtc *intel_crtc;
5783 if (!i915_powersave)
5788 i915_update_gfx_val(dev_priv);
5790 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
5791 /* Skip inactive CRTCs */
5795 intel_crtc = to_intel_crtc(crtc);
5796 if (!intel_crtc->busy)
5797 intel_decrease_pllclock(crtc);
5804 * intel_mark_busy - mark the GPU and possibly the display busy
5806 * @obj: object we're operating on
5808 * Callers can use this function to indicate that the GPU is busy processing
5809 * commands. If @obj matches one of the CRTC objects (i.e. it's a scanout
5810 * buffer), we'll also mark the display as busy, so we know to increase its
5813 void intel_mark_busy(struct drm_device *dev, struct drm_i915_gem_object *obj)
5815 drm_i915_private_t *dev_priv = dev->dev_private;
5816 struct drm_crtc *crtc = NULL;
5817 struct intel_framebuffer *intel_fb;
5818 struct intel_crtc *intel_crtc;
5820 if (!drm_core_check_feature(dev, DRIVER_MODESET))
5823 if (!dev_priv->busy) {
5824 intel_sanitize_pm(dev);
5825 dev_priv->busy = true;
5827 callout_reset(&dev_priv->idle_callout, GPU_IDLE_TIMEOUT,
5828 intel_gpu_idle_timer, dev);
5833 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
5837 intel_crtc = to_intel_crtc(crtc);
5838 intel_fb = to_intel_framebuffer(crtc->fb);
5839 if (intel_fb->obj == obj) {
5840 if (!intel_crtc->busy) {
5841 /* Non-busy -> busy, upclock */
5842 intel_increase_pllclock(crtc);
5843 intel_crtc->busy = true;
5845 /* Busy -> busy, put off timer */
5846 callout_reset(&intel_crtc->idle_callout,
5847 CRTC_IDLE_TIMEOUT, intel_crtc_idle_timer,
5854 static void intel_crtc_destroy(struct drm_crtc *crtc)
5856 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5857 struct drm_device *dev = crtc->dev;
5858 struct drm_i915_private *dev_priv = dev->dev_private;
5859 struct intel_unpin_work *work;
5861 mtx_lock(&dev->event_lock);
5862 work = intel_crtc->unpin_work;
5863 intel_crtc->unpin_work = NULL;
5864 mtx_unlock(&dev->event_lock);
5867 taskqueue_cancel(dev_priv->tq, &work->task, NULL);
5868 taskqueue_drain(dev_priv->tq, &work->task);
5869 free(work, DRM_MEM_KMS);
5872 drm_crtc_cleanup(crtc);
5874 free(intel_crtc, DRM_MEM_KMS);
5877 static void intel_unpin_work_fn(void *arg, int pending)
5879 struct intel_unpin_work *work =
5881 struct drm_device *dev = work->dev;
5884 intel_unpin_fb_obj(work->old_fb_obj);
5885 drm_gem_object_unreference(&work->pending_flip_obj->base);
5886 drm_gem_object_unreference(&work->old_fb_obj->base);
5888 intel_update_fbc(dev);
5890 free(work, DRM_MEM_KMS);
5893 static void do_intel_finish_page_flip(struct drm_device *dev,
5894 struct drm_crtc *crtc)
5896 drm_i915_private_t *dev_priv = dev->dev_private;
5897 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5898 struct intel_unpin_work *work;
5899 struct drm_i915_gem_object *obj;
5900 struct drm_pending_vblank_event *e;
5901 struct timeval tnow, tvbl;
5903 /* Ignore early vblank irqs */
5904 if (intel_crtc == NULL)
5909 mtx_lock(&dev->event_lock);
5910 work = intel_crtc->unpin_work;
5911 if (work == NULL || !work->pending) {
5912 mtx_unlock(&dev->event_lock);
5916 intel_crtc->unpin_work = NULL;
5920 e->event.sequence = drm_vblank_count_and_time(dev, intel_crtc->pipe, &tvbl);
5922 /* Called before vblank count and timestamps have
5923 * been updated for the vblank interval of flip
5924 * completion? Need to increment vblank count and
5925 * add one videorefresh duration to returned timestamp
5926 * to account for this. We assume this happened if we
5927 * get called over 0.9 frame durations after the last
5928 * timestamped vblank.
5930 * This calculation can not be used with vrefresh rates
5931 * below 5Hz (10Hz to be on the safe side) without
5932 * promoting to 64 integers.
5934 if (10 * (timeval_to_ns(&tnow) - timeval_to_ns(&tvbl)) >
5935 9 * crtc->framedur_ns) {
5936 e->event.sequence++;
5937 tvbl = ns_to_timeval(timeval_to_ns(&tvbl) +
5941 e->event.tv_sec = tvbl.tv_sec;
5942 e->event.tv_usec = tvbl.tv_usec;
5944 list_add_tail(&e->base.link,
5945 &e->base.file_priv->event_list);
5946 drm_event_wakeup(&e->base);
5949 drm_vblank_put(dev, intel_crtc->pipe);
5951 obj = work->old_fb_obj;
5953 atomic_clear_int(&obj->pending_flip, 1 << intel_crtc->plane);
5954 if (atomic_load_acq_int(&obj->pending_flip) == 0)
5955 wakeup(&obj->pending_flip);
5956 mtx_unlock(&dev->event_lock);
5958 taskqueue_enqueue(dev_priv->tq, &work->task);
5960 CTR2(KTR_DRM, "i915_flip_complete %d %p", intel_crtc->plane,
5961 work->pending_flip_obj);
5964 void intel_finish_page_flip(struct drm_device *dev, int pipe)
5966 drm_i915_private_t *dev_priv = dev->dev_private;
5967 struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
5969 do_intel_finish_page_flip(dev, crtc);
5972 void intel_finish_page_flip_plane(struct drm_device *dev, int plane)
5974 drm_i915_private_t *dev_priv = dev->dev_private;
5975 struct drm_crtc *crtc = dev_priv->plane_to_crtc_mapping[plane];
5977 do_intel_finish_page_flip(dev, crtc);
5980 void intel_prepare_page_flip(struct drm_device *dev, int plane)
5982 drm_i915_private_t *dev_priv = dev->dev_private;
5983 struct intel_crtc *intel_crtc =
5984 to_intel_crtc(dev_priv->plane_to_crtc_mapping[plane]);
5986 mtx_lock(&dev->event_lock);
5987 if (intel_crtc->unpin_work) {
5988 if ((++intel_crtc->unpin_work->pending) > 1)
5989 DRM_ERROR("Prepared flip multiple times\n");
5991 DRM_DEBUG("preparing flip with no unpin work?\n");
5993 mtx_unlock(&dev->event_lock);
5996 static int intel_gen2_queue_flip(struct drm_device *dev,
5997 struct drm_crtc *crtc,
5998 struct drm_framebuffer *fb,
5999 struct drm_i915_gem_object *obj)
6001 struct drm_i915_private *dev_priv = dev->dev_private;
6002 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6003 unsigned long offset;
6005 struct intel_ring_buffer *ring = &dev_priv->rings[RCS];
6008 ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
6012 /* Offset into the new buffer for cases of shared fbs between CRTCs */
6013 offset = crtc->y * fb->pitches[0] + crtc->x * fb->bits_per_pixel/8;
6015 ret = intel_ring_begin(ring, 6);
6019 /* Can't queue multiple flips, so wait for the previous
6020 * one to finish before executing the next.
6022 if (intel_crtc->plane)
6023 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
6025 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
6026 intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask);
6027 intel_ring_emit(ring, MI_NOOP);
6028 intel_ring_emit(ring, MI_DISPLAY_FLIP |
6029 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
6030 intel_ring_emit(ring, fb->pitches[0]);
6031 intel_ring_emit(ring, obj->gtt_offset + offset);
6032 intel_ring_emit(ring, 0); /* aux display base address, unused */
6033 intel_ring_advance(ring);
6037 intel_unpin_fb_obj(obj);
6042 static int intel_gen3_queue_flip(struct drm_device *dev,
6043 struct drm_crtc *crtc,
6044 struct drm_framebuffer *fb,
6045 struct drm_i915_gem_object *obj)
6047 struct drm_i915_private *dev_priv = dev->dev_private;
6048 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6049 unsigned long offset;
6051 struct intel_ring_buffer *ring = &dev_priv->rings[RCS];
6054 ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
6058 /* Offset into the new buffer for cases of shared fbs between CRTCs */
6059 offset = crtc->y * fb->pitches[0] + crtc->x * fb->bits_per_pixel/8;
6061 ret = intel_ring_begin(ring, 6);
6065 if (intel_crtc->plane)
6066 flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
6068 flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
6069 intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask);
6070 intel_ring_emit(ring, MI_NOOP);
6071 intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 |
6072 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
6073 intel_ring_emit(ring, fb->pitches[0]);
6074 intel_ring_emit(ring, obj->gtt_offset + offset);
6075 intel_ring_emit(ring, MI_NOOP);
6077 intel_ring_advance(ring);
6081 intel_unpin_fb_obj(obj);
6086 static int intel_gen4_queue_flip(struct drm_device *dev,
6087 struct drm_crtc *crtc,
6088 struct drm_framebuffer *fb,
6089 struct drm_i915_gem_object *obj)
6091 struct drm_i915_private *dev_priv = dev->dev_private;
6092 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6093 uint32_t pf, pipesrc;
6094 struct intel_ring_buffer *ring = &dev_priv->rings[RCS];
6097 ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
6101 ret = intel_ring_begin(ring, 4);
6105 /* i965+ uses the linear or tiled offsets from the
6106 * Display Registers (which do not change across a page-flip)
6107 * so we need only reprogram the base address.
6109 intel_ring_emit(ring, MI_DISPLAY_FLIP |
6110 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
6111 intel_ring_emit(ring, fb->pitches[0]);
6112 intel_ring_emit(ring, obj->gtt_offset | obj->tiling_mode);
6114 /* XXX Enabling the panel-fitter across page-flip is so far
6115 * untested on non-native modes, so ignore it for now.
6116 * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE;
6119 pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
6120 intel_ring_emit(ring, pf | pipesrc);
6121 intel_ring_advance(ring);
6125 intel_unpin_fb_obj(obj);
6130 static int intel_gen6_queue_flip(struct drm_device *dev,
6131 struct drm_crtc *crtc,
6132 struct drm_framebuffer *fb,
6133 struct drm_i915_gem_object *obj)
6135 struct drm_i915_private *dev_priv = dev->dev_private;
6136 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6137 struct intel_ring_buffer *ring = &dev_priv->rings[RCS];
6138 uint32_t pf, pipesrc;
6141 ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
6145 ret = intel_ring_begin(ring, 4);
6149 intel_ring_emit(ring, MI_DISPLAY_FLIP |
6150 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
6151 intel_ring_emit(ring, fb->pitches[0] | obj->tiling_mode);
6152 intel_ring_emit(ring, obj->gtt_offset);
6154 /* Contrary to the suggestions in the documentation,
6155 * "Enable Panel Fitter" does not seem to be required when page
6156 * flipping with a non-native mode, and worse causes a normal
6158 * pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE;
6161 pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
6162 intel_ring_emit(ring, pf | pipesrc);
6163 intel_ring_advance(ring);
6167 intel_unpin_fb_obj(obj);
6173 * On gen7 we currently use the blit ring because (in early silicon at least)
6174 * the render ring doesn't give us interrpts for page flip completion, which
6175 * means clients will hang after the first flip is queued. Fortunately the
6176 * blit ring generates interrupts properly, so use it instead.
6178 static int intel_gen7_queue_flip(struct drm_device *dev,
6179 struct drm_crtc *crtc,
6180 struct drm_framebuffer *fb,
6181 struct drm_i915_gem_object *obj)
6183 struct drm_i915_private *dev_priv = dev->dev_private;
6184 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6185 struct intel_ring_buffer *ring = &dev_priv->rings[BCS];
6188 ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
6192 ret = intel_ring_begin(ring, 4);
6196 intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | (intel_crtc->plane << 19));
6197 intel_ring_emit(ring, (fb->pitches[0] | obj->tiling_mode));
6198 intel_ring_emit(ring, (obj->gtt_offset));
6199 intel_ring_emit(ring, (MI_NOOP));
6200 intel_ring_advance(ring);
6204 intel_unpin_fb_obj(obj);
6209 static int intel_default_queue_flip(struct drm_device *dev,
6210 struct drm_crtc *crtc,
6211 struct drm_framebuffer *fb,
6212 struct drm_i915_gem_object *obj)
6217 static int intel_crtc_page_flip(struct drm_crtc *crtc,
6218 struct drm_framebuffer *fb,
6219 struct drm_pending_vblank_event *event)
6221 struct drm_device *dev = crtc->dev;
6222 struct drm_i915_private *dev_priv = dev->dev_private;
6223 struct intel_framebuffer *intel_fb;
6224 struct drm_i915_gem_object *obj;
6225 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6226 struct intel_unpin_work *work;
6229 work = malloc(sizeof *work, DRM_MEM_KMS, M_WAITOK | M_ZERO);
6231 work->event = event;
6232 work->dev = crtc->dev;
6233 intel_fb = to_intel_framebuffer(crtc->fb);
6234 work->old_fb_obj = intel_fb->obj;
6235 TASK_INIT(&work->task, 0, intel_unpin_work_fn, work);
6237 ret = drm_vblank_get(dev, intel_crtc->pipe);
6241 /* We borrow the event spin lock for protecting unpin_work */
6242 mtx_lock(&dev->event_lock);
6243 if (intel_crtc->unpin_work) {
6244 mtx_unlock(&dev->event_lock);
6245 free(work, DRM_MEM_KMS);
6246 drm_vblank_put(dev, intel_crtc->pipe);
6248 DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
6251 intel_crtc->unpin_work = work;
6252 mtx_unlock(&dev->event_lock);
6254 intel_fb = to_intel_framebuffer(fb);
6255 obj = intel_fb->obj;
6259 /* Reference the objects for the scheduled work. */
6260 drm_gem_object_reference(&work->old_fb_obj->base);
6261 drm_gem_object_reference(&obj->base);
6265 work->pending_flip_obj = obj;
6267 work->enable_stall_check = true;
6269 /* Block clients from rendering to the new back buffer until
6270 * the flip occurs and the object is no longer visible.
6272 atomic_set_int(&work->old_fb_obj->pending_flip, 1 << intel_crtc->plane);
6274 ret = dev_priv->display.queue_flip(dev, crtc, fb, obj);
6276 goto cleanup_pending;
6277 intel_disable_fbc(dev);
6278 intel_mark_busy(dev, obj);
6281 CTR2(KTR_DRM, "i915_flip_request %d %p", intel_crtc->plane, obj);
6286 atomic_clear_int(&work->old_fb_obj->pending_flip, 1 << intel_crtc->plane);
6287 drm_gem_object_unreference(&work->old_fb_obj->base);
6288 drm_gem_object_unreference(&obj->base);
6291 mtx_lock(&dev->event_lock);
6292 intel_crtc->unpin_work = NULL;
6293 mtx_unlock(&dev->event_lock);
6295 drm_vblank_put(dev, intel_crtc->pipe);
6297 free(work, DRM_MEM_KMS);
6302 static void intel_sanitize_modesetting(struct drm_device *dev,
6303 int pipe, int plane)
6305 struct drm_i915_private *dev_priv = dev->dev_private;
6309 /* Clear any frame start delays used for debugging left by the BIOS */
6312 I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK);
6315 if (HAS_PCH_SPLIT(dev))
6318 /* Who knows what state these registers were left in by the BIOS or
6321 * If we leave the registers in a conflicting state (e.g. with the
6322 * display plane reading from the other pipe than the one we intend
6323 * to use) then when we attempt to teardown the active mode, we will
6324 * not disable the pipes and planes in the correct order -- leaving
6325 * a plane reading from a disabled pipe and possibly leading to
6326 * undefined behaviour.
6329 reg = DSPCNTR(plane);
6330 val = I915_READ(reg);
6332 if ((val & DISPLAY_PLANE_ENABLE) == 0)
6334 if (!!(val & DISPPLANE_SEL_PIPE_MASK) == pipe)
6337 /* This display plane is active and attached to the other CPU pipe. */
6340 /* Disable the plane and wait for it to stop reading from the pipe. */
6341 intel_disable_plane(dev_priv, plane, pipe);
6342 intel_disable_pipe(dev_priv, pipe);
6345 static void intel_crtc_reset(struct drm_crtc *crtc)
6347 struct drm_device *dev = crtc->dev;
6348 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6350 /* Reset flags back to the 'unknown' status so that they
6351 * will be correctly set on the initial modeset.
6353 intel_crtc->dpms_mode = -1;
6355 /* We need to fix up any BIOS configuration that conflicts with
6358 intel_sanitize_modesetting(dev, intel_crtc->pipe, intel_crtc->plane);
6361 static struct drm_crtc_helper_funcs intel_helper_funcs = {
6362 .dpms = intel_crtc_dpms,
6363 .mode_fixup = intel_crtc_mode_fixup,
6364 .mode_set = intel_crtc_mode_set,
6365 .mode_set_base = intel_pipe_set_base,
6366 .mode_set_base_atomic = intel_pipe_set_base_atomic,
6367 .load_lut = intel_crtc_load_lut,
6368 .disable = intel_crtc_disable,
6371 static const struct drm_crtc_funcs intel_crtc_funcs = {
6372 .reset = intel_crtc_reset,
6373 .cursor_set = intel_crtc_cursor_set,
6374 .cursor_move = intel_crtc_cursor_move,
6375 .gamma_set = intel_crtc_gamma_set,
6376 .set_config = drm_crtc_helper_set_config,
6377 .destroy = intel_crtc_destroy,
6378 .page_flip = intel_crtc_page_flip,
6381 static void intel_pch_pll_init(struct drm_device *dev)
6383 drm_i915_private_t *dev_priv = dev->dev_private;
6386 if (dev_priv->num_pch_pll == 0) {
6387 DRM_DEBUG_KMS("No PCH PLLs on this hardware, skipping initialisation\n");
6391 for (i = 0; i < dev_priv->num_pch_pll; i++) {
6392 dev_priv->pch_plls[i].pll_reg = _PCH_DPLL(i);
6393 dev_priv->pch_plls[i].fp0_reg = _PCH_FP0(i);
6394 dev_priv->pch_plls[i].fp1_reg = _PCH_FP1(i);
6398 static void intel_crtc_init(struct drm_device *dev, int pipe)
6400 drm_i915_private_t *dev_priv = dev->dev_private;
6401 struct intel_crtc *intel_crtc;
6404 intel_crtc = malloc(sizeof(struct intel_crtc) +
6405 (INTELFB_CONN_LIMIT * sizeof(struct drm_connector *)),
6406 DRM_MEM_KMS, M_WAITOK | M_ZERO);
6408 drm_crtc_init(dev, &intel_crtc->base, &intel_crtc_funcs);
6410 drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256);
6411 for (i = 0; i < 256; i++) {
6412 intel_crtc->lut_r[i] = i;
6413 intel_crtc->lut_g[i] = i;
6414 intel_crtc->lut_b[i] = i;
6417 /* Swap pipes & planes for FBC on pre-965 */
6418 intel_crtc->pipe = pipe;
6419 intel_crtc->plane = pipe;
6420 if (IS_MOBILE(dev) && IS_GEN3(dev)) {
6421 DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
6422 intel_crtc->plane = !pipe;
6425 KASSERT(pipe < DRM_ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) &&
6426 dev_priv->plane_to_crtc_mapping[intel_crtc->plane] == NULL,
6427 ("plane_to_crtc is already initialized"));
6428 dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
6429 dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
6431 intel_crtc_reset(&intel_crtc->base);
6432 intel_crtc->active = true; /* force the pipe off on setup_init_config */
6433 intel_crtc->bpp = 24; /* default for pre-Ironlake */
6435 if (HAS_PCH_SPLIT(dev)) {
6436 intel_helper_funcs.prepare = ironlake_crtc_prepare;
6437 intel_helper_funcs.commit = ironlake_crtc_commit;
6439 intel_helper_funcs.prepare = i9xx_crtc_prepare;
6440 intel_helper_funcs.commit = i9xx_crtc_commit;
6443 drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
6445 intel_crtc->busy = false;
6447 callout_init(&intel_crtc->idle_callout, 1);
6450 int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
6451 struct drm_file *file)
6453 struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data;
6454 struct drm_mode_object *drmmode_obj;
6455 struct intel_crtc *crtc;
6457 if (!drm_core_check_feature(dev, DRIVER_MODESET))
6460 drmmode_obj = drm_mode_object_find(dev, pipe_from_crtc_id->crtc_id,
6461 DRM_MODE_OBJECT_CRTC);
6464 DRM_ERROR("no such CRTC id\n");
6468 crtc = to_intel_crtc(obj_to_crtc(drmmode_obj));
6469 pipe_from_crtc_id->pipe = crtc->pipe;
6474 static int intel_encoder_clones(struct drm_device *dev, int type_mask)
6476 struct intel_encoder *encoder;
6480 list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
6481 if (type_mask & encoder->clone_mask)
6482 index_mask |= (1 << entry);
6489 static bool has_edp_a(struct drm_device *dev)
6491 struct drm_i915_private *dev_priv = dev->dev_private;
6493 if (!IS_MOBILE(dev))
6496 if ((I915_READ(DP_A) & DP_DETECTED) == 0)
6500 (I915_READ(ILK_DISPLAY_CHICKEN_FUSES) & ILK_eDP_A_DISABLE))
6506 static void intel_setup_outputs(struct drm_device *dev)
6508 struct drm_i915_private *dev_priv = dev->dev_private;
6509 struct intel_encoder *encoder;
6510 bool dpd_is_edp = false;
6513 has_lvds = intel_lvds_init(dev);
6514 if (!has_lvds && !HAS_PCH_SPLIT(dev)) {
6515 /* disable the panel fitter on everything but LVDS */
6516 I915_WRITE(PFIT_CONTROL, 0);
6519 if (HAS_PCH_SPLIT(dev)) {
6520 dpd_is_edp = intel_dpd_is_edp(dev);
6523 intel_dp_init(dev, DP_A);
6525 if (dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED))
6526 intel_dp_init(dev, PCH_DP_D);
6529 intel_crt_init(dev);
6531 if (IS_HASWELL(dev)) {
6534 /* Haswell uses DDI functions to detect digital outputs */
6535 found = I915_READ(DDI_BUF_CTL_A) & DDI_INIT_DISPLAY_DETECTED;
6536 /* DDI A only supports eDP */
6538 intel_ddi_init(dev, PORT_A);
6540 /* DDI B, C and D detection is indicated by the SFUSE_STRAP
6542 found = I915_READ(SFUSE_STRAP);
6544 if (found & SFUSE_STRAP_DDIB_DETECTED)
6545 intel_ddi_init(dev, PORT_B);
6546 if (found & SFUSE_STRAP_DDIC_DETECTED)
6547 intel_ddi_init(dev, PORT_C);
6548 if (found & SFUSE_STRAP_DDID_DETECTED)
6549 intel_ddi_init(dev, PORT_D);
6550 } else if (HAS_PCH_SPLIT(dev)) {
6554 "HDMIB %d PCH_DP_B %d HDMIC %d HDMID %d PCH_DP_C %d PCH_DP_D %d LVDS %d\n",
6555 (I915_READ(HDMIB) & PORT_DETECTED) != 0,
6556 (I915_READ(PCH_DP_B) & DP_DETECTED) != 0,
6557 (I915_READ(HDMIC) & PORT_DETECTED) != 0,
6558 (I915_READ(HDMID) & PORT_DETECTED) != 0,
6559 (I915_READ(PCH_DP_C) & DP_DETECTED) != 0,
6560 (I915_READ(PCH_DP_D) & DP_DETECTED) != 0,
6561 (I915_READ(PCH_LVDS) & LVDS_DETECTED) != 0);
6563 if (I915_READ(HDMIB) & PORT_DETECTED) {
6564 /* PCH SDVOB multiplex with HDMIB */
6565 found = intel_sdvo_init(dev, PCH_SDVOB, true);
6567 intel_hdmi_init(dev, HDMIB);
6568 if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
6569 intel_dp_init(dev, PCH_DP_B);
6572 if (I915_READ(HDMIC) & PORT_DETECTED)
6573 intel_hdmi_init(dev, HDMIC);
6575 if (I915_READ(HDMID) & PORT_DETECTED)
6576 intel_hdmi_init(dev, HDMID);
6578 if (I915_READ(PCH_DP_C) & DP_DETECTED)
6579 intel_dp_init(dev, PCH_DP_C);
6581 if (!dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED))
6582 intel_dp_init(dev, PCH_DP_D);
6584 } else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) {
6587 if (I915_READ(SDVOB) & SDVO_DETECTED) {
6588 DRM_DEBUG_KMS("probing SDVOB\n");
6589 found = intel_sdvo_init(dev, SDVOB, true);
6590 if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) {
6591 DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
6592 intel_hdmi_init(dev, SDVOB);
6595 if (!found && SUPPORTS_INTEGRATED_DP(dev)) {
6596 DRM_DEBUG_KMS("probing DP_B\n");
6597 intel_dp_init(dev, DP_B);
6601 /* Before G4X SDVOC doesn't have its own detect register */
6603 if (I915_READ(SDVOB) & SDVO_DETECTED) {
6604 DRM_DEBUG_KMS("probing SDVOC\n");
6605 found = intel_sdvo_init(dev, SDVOC, false);
6608 if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) {
6610 if (SUPPORTS_INTEGRATED_HDMI(dev)) {
6611 DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
6612 intel_hdmi_init(dev, SDVOC);
6614 if (SUPPORTS_INTEGRATED_DP(dev)) {
6615 DRM_DEBUG_KMS("probing DP_C\n");
6616 intel_dp_init(dev, DP_C);
6620 if (SUPPORTS_INTEGRATED_DP(dev) &&
6621 (I915_READ(DP_D) & DP_DETECTED)) {
6622 DRM_DEBUG_KMS("probing DP_D\n");
6623 intel_dp_init(dev, DP_D);
6625 } else if (IS_GEN2(dev)) {
6629 intel_dvo_init(dev);
6633 if (SUPPORTS_TV(dev))
6636 list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
6637 encoder->base.possible_crtcs = encoder->crtc_mask;
6638 encoder->base.possible_clones =
6639 intel_encoder_clones(dev, encoder->clone_mask);
6642 /* disable all the possible outputs/crtcs before entering KMS mode */
6643 drm_helper_disable_unused_functions(dev);
6645 if (HAS_PCH_SPLIT(dev))
6646 ironlake_init_pch_refclk(dev);
6649 static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
6651 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
6653 drm_framebuffer_cleanup(fb);
6654 drm_gem_object_unreference_unlocked(&intel_fb->obj->base);
6656 free(intel_fb, DRM_MEM_KMS);
6659 static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb,
6660 struct drm_file *file,
6661 unsigned int *handle)
6663 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
6664 struct drm_i915_gem_object *obj = intel_fb->obj;
6666 return drm_gem_handle_create(file, &obj->base, handle);
6669 static const struct drm_framebuffer_funcs intel_fb_funcs = {
6670 .destroy = intel_user_framebuffer_destroy,
6671 .create_handle = intel_user_framebuffer_create_handle,
6674 int intel_framebuffer_init(struct drm_device *dev,
6675 struct intel_framebuffer *intel_fb,
6676 struct drm_mode_fb_cmd2 *mode_cmd,
6677 struct drm_i915_gem_object *obj)
6681 if (obj->tiling_mode == I915_TILING_Y)
6684 if (mode_cmd->pitches[0] & 63)
6687 switch (mode_cmd->pixel_format) {
6688 case DRM_FORMAT_RGB332:
6689 case DRM_FORMAT_RGB565:
6690 case DRM_FORMAT_XRGB8888:
6691 case DRM_FORMAT_XBGR8888:
6692 case DRM_FORMAT_ARGB8888:
6693 case DRM_FORMAT_XRGB2101010:
6694 case DRM_FORMAT_ARGB2101010:
6695 /* RGB formats are common across chipsets */
6697 case DRM_FORMAT_YUYV:
6698 case DRM_FORMAT_UYVY:
6699 case DRM_FORMAT_YVYU:
6700 case DRM_FORMAT_VYUY:
6703 DRM_DEBUG("unsupported pixel format %u\n", mode_cmd->pixel_format);
6707 ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs);
6709 DRM_ERROR("framebuffer init failed %d\n", ret);
6713 drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd);
6714 intel_fb->obj = obj;
6719 intel_user_framebuffer_create(struct drm_device *dev,
6720 struct drm_file *filp,
6721 struct drm_mode_fb_cmd2 *mode_cmd,
6722 struct drm_framebuffer **res)
6724 struct drm_i915_gem_object *obj;
6726 obj = to_intel_bo(drm_gem_object_lookup(dev, filp,
6727 mode_cmd->handles[0]));
6728 if (&obj->base == NULL)
6731 return intel_framebuffer_create(dev, mode_cmd, obj, res);
6734 static const struct drm_mode_config_funcs intel_mode_funcs = {
6735 .fb_create = intel_user_framebuffer_create,
6736 .output_poll_changed = intel_fb_output_poll_changed,
6739 /* Set up chip specific display functions */
6740 static void intel_init_display(struct drm_device *dev)
6742 struct drm_i915_private *dev_priv = dev->dev_private;
6744 /* We always want a DPMS function */
6745 if (HAS_PCH_SPLIT(dev)) {
6746 dev_priv->display.dpms = ironlake_crtc_dpms;
6747 dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set;
6748 dev_priv->display.off = ironlake_crtc_off;
6749 dev_priv->display.update_plane = ironlake_update_plane;
6751 dev_priv->display.dpms = i9xx_crtc_dpms;
6752 dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
6753 dev_priv->display.off = i9xx_crtc_off;
6754 dev_priv->display.update_plane = i9xx_update_plane;
6757 /* Returns the core display clock speed */
6758 if (IS_VALLEYVIEW(dev))
6759 dev_priv->display.get_display_clock_speed =
6760 valleyview_get_display_clock_speed;
6761 else if (IS_I945G(dev) || (IS_G33(dev) && !IS_PINEVIEW_M(dev)))
6762 dev_priv->display.get_display_clock_speed =
6763 i945_get_display_clock_speed;
6764 else if (IS_I915G(dev))
6765 dev_priv->display.get_display_clock_speed =
6766 i915_get_display_clock_speed;
6767 else if (IS_I945GM(dev) || IS_845G(dev) || IS_PINEVIEW_M(dev))
6768 dev_priv->display.get_display_clock_speed =
6769 i9xx_misc_get_display_clock_speed;
6770 else if (IS_I915GM(dev))
6771 dev_priv->display.get_display_clock_speed =
6772 i915gm_get_display_clock_speed;
6773 else if (IS_I865G(dev))
6774 dev_priv->display.get_display_clock_speed =
6775 i865_get_display_clock_speed;
6776 else if (IS_I85X(dev))
6777 dev_priv->display.get_display_clock_speed =
6778 i855_get_display_clock_speed;
6780 dev_priv->display.get_display_clock_speed =
6781 i830_get_display_clock_speed;
6783 if (HAS_PCH_SPLIT(dev)) {
6785 dev_priv->display.fdi_link_train = ironlake_fdi_link_train;
6786 dev_priv->display.write_eld = ironlake_write_eld;
6787 } else if (IS_GEN6(dev)) {
6788 dev_priv->display.fdi_link_train = gen6_fdi_link_train;
6789 dev_priv->display.write_eld = ironlake_write_eld;
6790 } else if (IS_IVYBRIDGE(dev)) {
6791 /* FIXME: detect B0+ stepping and use auto training */
6792 dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
6793 dev_priv->display.write_eld = ironlake_write_eld;
6794 } else if (IS_HASWELL(dev)) {
6795 dev_priv->display.fdi_link_train = hsw_fdi_link_train;
6796 dev_priv->display.write_eld = ironlake_write_eld;
6798 dev_priv->display.update_wm = NULL;
6799 } else if (IS_VALLEYVIEW(dev)) {
6800 dev_priv->display.force_wake_get = vlv_force_wake_get;
6801 dev_priv->display.force_wake_put = vlv_force_wake_put;
6802 } else if (IS_G4X(dev)) {
6803 dev_priv->display.write_eld = g4x_write_eld;
6806 /* Default just returns -ENODEV to indicate unsupported */
6807 dev_priv->display.queue_flip = intel_default_queue_flip;
6809 switch (INTEL_INFO(dev)->gen) {
6811 dev_priv->display.queue_flip = intel_gen2_queue_flip;
6815 dev_priv->display.queue_flip = intel_gen3_queue_flip;
6820 dev_priv->display.queue_flip = intel_gen4_queue_flip;
6824 dev_priv->display.queue_flip = intel_gen6_queue_flip;
6827 dev_priv->display.queue_flip = intel_gen7_queue_flip;
6833 * Some BIOSes insist on assuming the GPU's pipe A is enabled at suspend,
6834 * resume, or other times. This quirk makes sure that's the case for
6837 static void quirk_pipea_force(struct drm_device *dev)
6839 struct drm_i915_private *dev_priv = dev->dev_private;
6841 dev_priv->quirks |= QUIRK_PIPEA_FORCE;
6842 DRM_INFO("applying pipe a force quirk\n");
6846 * Some machines (Lenovo U160) do not work with SSC on LVDS for some reason
6848 static void quirk_ssc_force_disable(struct drm_device *dev)
6850 struct drm_i915_private *dev_priv = dev->dev_private;
6851 dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE;
6852 DRM_INFO("applying lvds SSC disable quirk\n");
6856 * A machine (e.g. Acer Aspire 5734Z) may need to invert the panel backlight
6859 static void quirk_invert_brightness(struct drm_device *dev)
6861 struct drm_i915_private *dev_priv = dev->dev_private;
6862 dev_priv->quirks |= QUIRK_INVERT_BRIGHTNESS;
6863 DRM_INFO("applying inverted panel brightness quirk\n");
6866 struct intel_quirk {
6868 int subsystem_vendor;
6869 int subsystem_device;
6870 void (*hook)(struct drm_device *dev);
6873 #define PCI_ANY_ID (~0u)
6875 static struct intel_quirk intel_quirks[] = {
6876 /* HP Mini needs pipe A force quirk (LP: #322104) */
6877 { 0x27ae, 0x103c, 0x361a, quirk_pipea_force },
6879 /* Thinkpad R31 needs pipe A force quirk */
6880 { 0x3577, 0x1014, 0x0505, quirk_pipea_force },
6881 /* Toshiba Protege R-205, S-209 needs pipe A force quirk */
6882 { 0x2592, 0x1179, 0x0001, quirk_pipea_force },
6884 /* ThinkPad X30 needs pipe A force quirk (LP: #304614) */
6885 { 0x3577, 0x1014, 0x0513, quirk_pipea_force },
6886 /* ThinkPad X40 needs pipe A force quirk */
6888 /* ThinkPad T60 needs pipe A force quirk (bug #16494) */
6889 { 0x2782, 0x17aa, 0x201a, quirk_pipea_force },
6891 /* 855 & before need to leave pipe A & dpll A up */
6892 { 0x3582, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
6893 { 0x2562, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
6895 /* Lenovo U160 cannot use SSC on LVDS */
6896 { 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable },
6898 /* Sony Vaio Y cannot use SSC on LVDS */
6899 { 0x0046, 0x104d, 0x9076, quirk_ssc_force_disable },
6901 /* Acer Aspire 5734Z must invert backlight brightness */
6902 { 0x2a42, 0x1025, 0x0459, quirk_invert_brightness },
6905 static void intel_init_quirks(struct drm_device *dev)
6907 struct intel_quirk *q;
6912 for (i = 0; i < ARRAY_SIZE(intel_quirks); i++) {
6913 q = &intel_quirks[i];
6914 if (pci_get_device(d) == q->device &&
6915 (pci_get_subvendor(d) == q->subsystem_vendor ||
6916 q->subsystem_vendor == PCI_ANY_ID) &&
6917 (pci_get_subdevice(d) == q->subsystem_device ||
6918 q->subsystem_device == PCI_ANY_ID))
6923 /* Disable the VGA plane that we never use */
6924 static void i915_disable_vga(struct drm_device *dev)
6926 struct drm_i915_private *dev_priv = dev->dev_private;
6930 if (HAS_PCH_SPLIT(dev))
6931 vga_reg = CPU_VGACNTRL;
6936 vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO);
6938 outb(VGA_SR_INDEX, SR01);
6939 sr1 = inb(VGA_SR_DATA);
6940 outb(VGA_SR_DATA, sr1 | 1<<5);
6942 vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
6946 I915_WRITE(vga_reg, VGA_DISP_DISABLE);
6947 POSTING_READ(vga_reg);
6950 static void ivb_pch_pwm_override(struct drm_device *dev)
6952 struct drm_i915_private *dev_priv = dev->dev_private;
6955 * IVB has CPU eDP backlight regs too, set things up to let the
6956 * PCH regs control the backlight
6958 I915_WRITE(BLC_PWM_CPU_CTL2, PWM_ENABLE);
6959 I915_WRITE(BLC_PWM_CPU_CTL, 0);
6960 I915_WRITE(BLC_PWM_PCH_CTL1, PWM_ENABLE);
6963 void intel_modeset_init_hw(struct drm_device *dev)
6965 struct drm_i915_private *dev_priv = dev->dev_private;
6967 intel_init_clock_gating(dev);
6969 if (IS_IRONLAKE_M(dev)) {
6970 ironlake_enable_drps(dev);
6971 ironlake_enable_rc6(dev);
6972 intel_init_emon(dev);
6975 if ((IS_GEN6(dev) || IS_GEN7(dev)) && !IS_VALLEYVIEW(dev)) {
6976 gen6_enable_rps(dev_priv);
6977 gen6_update_ring_freq(dev_priv);
6980 if (IS_IVYBRIDGE(dev))
6981 ivb_pch_pwm_override(dev);
6984 void intel_modeset_init(struct drm_device *dev)
6986 struct drm_i915_private *dev_priv = dev->dev_private;
6989 drm_mode_config_init(dev);
6991 dev->mode_config.min_width = 0;
6992 dev->mode_config.min_height = 0;
6994 dev->mode_config.preferred_depth = 24;
6995 dev->mode_config.prefer_shadow = 1;
6997 dev->mode_config.funcs = &intel_mode_funcs;
6999 intel_init_quirks(dev);
7003 intel_prepare_ddi(dev);
7005 intel_init_display(dev);
7008 dev->mode_config.max_width = 2048;
7009 dev->mode_config.max_height = 2048;
7010 } else if (IS_GEN3(dev)) {
7011 dev->mode_config.max_width = 4096;
7012 dev->mode_config.max_height = 4096;
7014 dev->mode_config.max_width = 8192;
7015 dev->mode_config.max_height = 8192;
7017 dev->mode_config.fb_base = dev->agp->base;
7019 DRM_DEBUG_KMS("%d display pipe%s available.\n",
7020 dev_priv->num_pipe, dev_priv->num_pipe > 1 ? "s" : "");
7022 for (i = 0; i < dev_priv->num_pipe; i++) {
7023 intel_crtc_init(dev, i);
7024 ret = intel_plane_init(dev, i);
7026 DRM_DEBUG_KMS("plane %d init failed: %d\n", i, ret);
7029 intel_pch_pll_init(dev);
7031 /* Just disable it once at startup */
7032 i915_disable_vga(dev);
7033 intel_setup_outputs(dev);
7035 TASK_INIT(&dev_priv->idle_task, 0, intel_idle_update, dev_priv);
7036 callout_init(&dev_priv->idle_callout, 1);
7039 void intel_modeset_gem_init(struct drm_device *dev)
7041 intel_modeset_init_hw(dev);
7043 intel_setup_overlay(dev);
7046 void intel_modeset_cleanup(struct drm_device *dev)
7048 struct drm_i915_private *dev_priv = dev->dev_private;
7049 struct drm_crtc *crtc;
7050 struct intel_crtc *intel_crtc;
7052 drm_kms_helper_poll_fini(dev);
7056 intel_unregister_dsm_handler();
7060 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
7061 /* Skip inactive CRTCs */
7065 intel_crtc = to_intel_crtc(crtc);
7066 intel_increase_pllclock(crtc);
7069 intel_disable_fbc(dev);
7071 if (IS_IRONLAKE_M(dev))
7072 ironlake_disable_drps(dev);
7073 if ((IS_GEN6(dev) || IS_GEN7(dev)) && !IS_VALLEYVIEW(dev))
7074 gen6_disable_rps(dev);
7076 if (IS_IRONLAKE_M(dev))
7077 ironlake_disable_rc6(dev);
7079 if (IS_VALLEYVIEW(dev))
7084 /* Disable the irq before mode object teardown, for the irq might
7085 * enqueue unpin/hotplug work. */
7086 drm_irq_uninstall(dev);
7087 if (taskqueue_cancel(dev_priv->tq, &dev_priv->hotplug_task, NULL))
7088 taskqueue_drain(dev_priv->tq, &dev_priv->hotplug_task);
7089 if (taskqueue_cancel(dev_priv->tq, &dev_priv->rps_task, NULL))
7090 taskqueue_drain(dev_priv->tq, &dev_priv->rps_task);
7092 /* Shut off idle work before the crtcs get freed. */
7093 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
7094 intel_crtc = to_intel_crtc(crtc);
7095 callout_drain(&intel_crtc->idle_callout);
7097 callout_drain(&dev_priv->idle_callout);
7098 if (taskqueue_cancel(dev_priv->tq, &dev_priv->idle_task, NULL))
7099 taskqueue_drain(dev_priv->tq, &dev_priv->idle_task);
7101 drm_mode_config_cleanup(dev);
7105 * Return which encoder is currently attached for connector.
7107 struct drm_encoder *intel_best_encoder(struct drm_connector *connector)
7109 return &intel_attached_encoder(connector)->base;
7112 void intel_connector_attach_encoder(struct intel_connector *connector,
7113 struct intel_encoder *encoder)
7115 connector->encoder = encoder;
7116 drm_mode_connector_attach_encoder(&connector->base,
7121 * set vga decode state - true == enable VGA decode
7123 int intel_modeset_vga_set_state(struct drm_device *dev, bool state)
7125 device_t bridge_dev;
7128 bridge_dev = intel_gtt_get_bridge_device();
7129 gmch_ctrl = pci_read_config(bridge_dev, INTEL_GMCH_CTRL, 2);
7131 gmch_ctrl &= ~INTEL_GMCH_VGA_DISABLE;
7133 gmch_ctrl |= INTEL_GMCH_VGA_DISABLE;
7134 pci_write_config(bridge_dev, INTEL_GMCH_CTRL, gmch_ctrl, 2);
7138 struct intel_display_error_state {
7139 struct intel_cursor_error_state {
7146 struct intel_pipe_error_state {
7158 struct intel_plane_error_state {
7169 struct intel_display_error_state *
7170 intel_display_capture_error_state(struct drm_device *dev)
7172 drm_i915_private_t *dev_priv = dev->dev_private;
7173 struct intel_display_error_state *error;
7176 error = malloc(sizeof(*error), DRM_MEM_KMS, M_NOWAIT);
7180 for (i = 0; i < 2; i++) {
7181 error->cursor[i].control = I915_READ(CURCNTR(i));
7182 error->cursor[i].position = I915_READ(CURPOS(i));
7183 error->cursor[i].base = I915_READ(CURBASE(i));
7185 error->plane[i].control = I915_READ(DSPCNTR(i));
7186 error->plane[i].stride = I915_READ(DSPSTRIDE(i));
7187 error->plane[i].size = I915_READ(DSPSIZE(i));
7188 error->plane[i].pos = I915_READ(DSPPOS(i));
7189 error->plane[i].addr = I915_READ(DSPADDR(i));
7190 if (INTEL_INFO(dev)->gen >= 4) {
7191 error->plane[i].surface = I915_READ(DSPSURF(i));
7192 error->plane[i].tile_offset = I915_READ(DSPTILEOFF(i));
7195 error->pipe[i].conf = I915_READ(PIPECONF(i));
7196 error->pipe[i].source = I915_READ(PIPESRC(i));
7197 error->pipe[i].htotal = I915_READ(HTOTAL(i));
7198 error->pipe[i].hblank = I915_READ(HBLANK(i));
7199 error->pipe[i].hsync = I915_READ(HSYNC(i));
7200 error->pipe[i].vtotal = I915_READ(VTOTAL(i));
7201 error->pipe[i].vblank = I915_READ(VBLANK(i));
7202 error->pipe[i].vsync = I915_READ(VSYNC(i));
7209 intel_display_print_error_state(struct sbuf *m,
7210 struct drm_device *dev,
7211 struct intel_display_error_state *error)
7215 for (i = 0; i < 2; i++) {
7216 sbuf_printf(m, "Pipe [%d]:\n", i);
7217 sbuf_printf(m, " CONF: %08x\n", error->pipe[i].conf);
7218 sbuf_printf(m, " SRC: %08x\n", error->pipe[i].source);
7219 sbuf_printf(m, " HTOTAL: %08x\n", error->pipe[i].htotal);
7220 sbuf_printf(m, " HBLANK: %08x\n", error->pipe[i].hblank);
7221 sbuf_printf(m, " HSYNC: %08x\n", error->pipe[i].hsync);
7222 sbuf_printf(m, " VTOTAL: %08x\n", error->pipe[i].vtotal);
7223 sbuf_printf(m, " VBLANK: %08x\n", error->pipe[i].vblank);
7224 sbuf_printf(m, " VSYNC: %08x\n", error->pipe[i].vsync);
7226 sbuf_printf(m, "Plane [%d]:\n", i);
7227 sbuf_printf(m, " CNTR: %08x\n", error->plane[i].control);
7228 sbuf_printf(m, " STRIDE: %08x\n", error->plane[i].stride);
7229 sbuf_printf(m, " SIZE: %08x\n", error->plane[i].size);
7230 sbuf_printf(m, " POS: %08x\n", error->plane[i].pos);
7231 sbuf_printf(m, " ADDR: %08x\n", error->plane[i].addr);
7232 if (INTEL_INFO(dev)->gen >= 4) {
7233 sbuf_printf(m, " SURF: %08x\n", error->plane[i].surface);
7234 sbuf_printf(m, " TILEOFF: %08x\n", error->plane[i].tile_offset);
7237 sbuf_printf(m, "Cursor [%d]:\n", i);
7238 sbuf_printf(m, " CNTR: %08x\n", error->cursor[i].control);
7239 sbuf_printf(m, " POS: %08x\n", error->cursor[i].position);
7240 sbuf_printf(m, " BASE: %08x\n", error->cursor[i].base);