sys/dev/drm2/i915/intel_lvds.c

   1 /*
   2  * Copyright © 2006-2007 Intel Corporation
   3  * Copyright (c) 2006 Dave Airlie <airlied@linux.ie>
   4  *
   5  * Permission is hereby granted, free of charge, to any person obtaining a
   6  * copy of this software and associated documentation files (the "Software"),
   7  * to deal in the Software without restriction, including without limitation
   8  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
   9  * and/or sell copies of the Software, and to permit persons to whom the
  10  * Software is furnished to do so, subject to the following conditions:
  11  *
  12  * The above copyright notice and this permission notice (including the next
  13  * paragraph) shall be included in all copies or substantial portions of the
  14  * Software.
  15  *
  16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  21  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
  22  * DEALINGS IN THE SOFTWARE.
  23  *
  24  * Authors:
  25  *      Eric Anholt <eric@anholt.net>
  26  *      Dave Airlie <airlied@linux.ie>
  27  *      Jesse Barnes <jesse.barnes@intel.com>
  28  */
  29
  30 #include <sys/cdefs.h>
  31 __FBSDID("$FreeBSD$");
  32
  33 #include <dev/drm2/drmP.h>
  34 #include <dev/drm2/drm_crtc.h>
  35 #include <dev/drm2/drm_edid.h>
  36 #include <dev/drm2/i915/intel_drv.h>
  37 #include <dev/drm2/i915/i915_drm.h>
  38 #include <dev/drm2/i915/i915_drv.h>
  39
  40 /* Private structure for the integrated LVDS support */
  41 struct intel_lvds_connector {
  42         struct intel_connector base;
  43
  44 #ifdef FREEBSD_WIP
  45         struct notifier_block lid_notifier;
  46 #endif /* FREEBSD_WIP */
  47 };
  48
  49 struct intel_lvds_encoder {
  50         struct intel_encoder base;
  51
  52         u32 pfit_control;
  53         u32 pfit_pgm_ratios;
  54         bool pfit_dirty;
  55
  56         struct intel_lvds_connector *attached_connector;
  57 };
  58
  59 static struct intel_lvds_encoder *to_lvds_encoder(struct drm_encoder *encoder)
  60 {
  61         return container_of(encoder, struct intel_lvds_encoder, base.base);
  62 }
  63
  64 static struct intel_lvds_connector *to_lvds_connector(struct drm_connector *connector)
  65 {
  66         return container_of(connector, struct intel_lvds_connector, base.base);
  67 }
  68
  69 static bool intel_lvds_get_hw_state(struct intel_encoder *encoder,
  70                                     enum pipe *pipe)
  71 {
  72         struct drm_device *dev = encoder->base.dev;
  73         struct drm_i915_private *dev_priv = dev->dev_private;
  74         u32 lvds_reg, tmp;
  75
  76         if (HAS_PCH_SPLIT(dev)) {
  77                 lvds_reg = PCH_LVDS;
  78         } else {
  79                 lvds_reg = LVDS;
  80         }
  81
  82         tmp = I915_READ(lvds_reg);
  83
  84         if (!(tmp & LVDS_PORT_EN))
  85                 return false;
  86
  87         if (HAS_PCH_CPT(dev))
  88                 *pipe = PORT_TO_PIPE_CPT(tmp);
  89         else
  90                 *pipe = PORT_TO_PIPE(tmp);
  91
  92         return true;
  93 }
  94
  95 /**
  96  * Sets the power state for the panel.
  97  */
  98 static void intel_enable_lvds(struct intel_encoder *encoder)
  99 {
 100         struct drm_device *dev = encoder->base.dev;
 101         struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base);
 102         struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
 103         struct drm_i915_private *dev_priv = dev->dev_private;
 104         u32 ctl_reg, lvds_reg, stat_reg;
 105
 106         if (HAS_PCH_SPLIT(dev)) {
 107                 ctl_reg = PCH_PP_CONTROL;
 108                 lvds_reg = PCH_LVDS;
 109                 stat_reg = PCH_PP_STATUS;
 110         } else {
 111                 ctl_reg = PP_CONTROL;
 112                 lvds_reg = LVDS;
 113                 stat_reg = PP_STATUS;
 114         }
 115
 116         I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN);
 117
 118         if (lvds_encoder->pfit_dirty) {
 119                 /*
 120                  * Enable automatic panel scaling so that non-native modes
 121                  * fill the screen.  The panel fitter should only be
 122                  * adjusted whilst the pipe is disabled, according to
 123                  * register description and PRM.
 124                  */
 125                 DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n",
 126                               lvds_encoder->pfit_control,
 127                               lvds_encoder->pfit_pgm_ratios);
 128
 129                 I915_WRITE(PFIT_PGM_RATIOS, lvds_encoder->pfit_pgm_ratios);
 130                 I915_WRITE(PFIT_CONTROL, lvds_encoder->pfit_control);
 131                 lvds_encoder->pfit_dirty = false;
 132         }
 133
 134         I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON);
 135         POSTING_READ(lvds_reg);
 136         if (wait_for((I915_READ(stat_reg) & PP_ON) != 0, 1000))
 137                 DRM_ERROR("timed out waiting for panel to power on\n");
 138
 139         intel_panel_enable_backlight(dev, intel_crtc->pipe);
 140 }
 141
 142 static void intel_disable_lvds(struct intel_encoder *encoder)
 143 {
 144         struct drm_device *dev = encoder->base.dev;
 145         struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base);
 146         struct drm_i915_private *dev_priv = dev->dev_private;
 147         u32 ctl_reg, lvds_reg, stat_reg;
 148
 149         if (HAS_PCH_SPLIT(dev)) {
 150                 ctl_reg = PCH_PP_CONTROL;
 151                 lvds_reg = PCH_LVDS;
 152                 stat_reg = PCH_PP_STATUS;
 153         } else {
 154                 ctl_reg = PP_CONTROL;
 155                 lvds_reg = LVDS;
 156                 stat_reg = PP_STATUS;
 157         }
 158
 159         intel_panel_disable_backlight(dev);
 160
 161         I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON);
 162         if (wait_for((I915_READ(stat_reg) & PP_ON) == 0, 1000))
 163                 DRM_ERROR("timed out waiting for panel to power off\n");
 164
 165         if (lvds_encoder->pfit_control) {
 166                 I915_WRITE(PFIT_CONTROL, 0);
 167                 lvds_encoder->pfit_dirty = true;
 168         }
 169
 170         I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN);
 171         POSTING_READ(lvds_reg);
 172 }
 173
 174 static int intel_lvds_mode_valid(struct drm_connector *connector,
 175                                  struct drm_display_mode *mode)
 176 {
 177         struct intel_connector *intel_connector = to_intel_connector(connector);
 178         struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
 179
 180         if (mode->hdisplay > fixed_mode->hdisplay)
 181                 return MODE_PANEL;
 182         if (mode->vdisplay > fixed_mode->vdisplay)
 183                 return MODE_PANEL;
 184
 185         return MODE_OK;
 186 }
 187
 188 static void
 189 centre_horizontally(struct drm_display_mode *mode,
 190                     int width)
 191 {
 192         u32 border, sync_pos, blank_width, sync_width;
 193
 194         /* keep the hsync and hblank widths constant */
 195         sync_width = mode->crtc_hsync_end - mode->crtc_hsync_start;
 196         blank_width = mode->crtc_hblank_end - mode->crtc_hblank_start;
 197         sync_pos = (blank_width - sync_width + 1) / 2;
 198
 199         border = (mode->hdisplay - width + 1) / 2;
 200         border += border & 1; /* make the border even */
 201
 202         mode->crtc_hdisplay = width;
 203         mode->crtc_hblank_start = width + border;
 204         mode->crtc_hblank_end = mode->crtc_hblank_start + blank_width;
 205
 206         mode->crtc_hsync_start = mode->crtc_hblank_start + sync_pos;
 207         mode->crtc_hsync_end = mode->crtc_hsync_start + sync_width;
 208
 209         mode->private_flags |= INTEL_MODE_CRTC_TIMINGS_SET;
 210 }
 211
 212 static void
 213 centre_vertically(struct drm_display_mode *mode,
 214                   int height)
 215 {
 216         u32 border, sync_pos, blank_width, sync_width;
 217
 218         /* keep the vsync and vblank widths constant */
 219         sync_width = mode->crtc_vsync_end - mode->crtc_vsync_start;
 220         blank_width = mode->crtc_vblank_end - mode->crtc_vblank_start;
 221         sync_pos = (blank_width - sync_width + 1) / 2;
 222
 223         border = (mode->vdisplay - height + 1) / 2;
 224
 225         mode->crtc_vdisplay = height;
 226         mode->crtc_vblank_start = height + border;
 227         mode->crtc_vblank_end = mode->crtc_vblank_start + blank_width;
 228
 229         mode->crtc_vsync_start = mode->crtc_vblank_start + sync_pos;
 230         mode->crtc_vsync_end = mode->crtc_vsync_start + sync_width;
 231
 232         mode->private_flags |= INTEL_MODE_CRTC_TIMINGS_SET;
 233 }
 234
 235 static inline u32 panel_fitter_scaling(u32 source, u32 target)
 236 {
 237         /*
 238          * Floating point operation is not supported. So the FACTOR
 239          * is defined, which can avoid the floating point computation
 240          * when calculating the panel ratio.
 241          */
 242 #define ACCURACY 12
 243 #define FACTOR (1 << ACCURACY)
 244         u32 ratio = source * FACTOR / target;
 245         return (FACTOR * ratio + FACTOR/2) / FACTOR;
 246 }
 247
 248 static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
 249                                   const struct drm_display_mode *mode,
 250                                   struct drm_display_mode *adjusted_mode)
 251 {
 252         struct drm_device *dev = encoder->dev;
 253         struct drm_i915_private *dev_priv = dev->dev_private;
 254         struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(encoder);
 255         struct intel_connector *intel_connector =
 256                 &lvds_encoder->attached_connector->base;
 257         struct intel_crtc *intel_crtc = lvds_encoder->base.new_crtc;
 258         u32 pfit_control = 0, pfit_pgm_ratios = 0, border = 0;
 259         int pipe;
 260
 261         /* Should never happen!! */
 262         if (INTEL_INFO(dev)->gen < 4 && intel_crtc->pipe == 0) {
 263                 DRM_ERROR("Can't support LVDS on pipe A\n");
 264                 return false;
 265         }
 266
 267         if (intel_encoder_check_is_cloned(&lvds_encoder->base))
 268                 return false;
 269
 270         /*
 271          * We have timings from the BIOS for the panel, put them in
 272          * to the adjusted mode.  The CRTC will be set up for this mode,
 273          * with the panel scaling set up to source from the H/VDisplay
 274          * of the original mode.
 275          */
 276         intel_fixed_panel_mode(intel_connector->panel.fixed_mode,
 277                                adjusted_mode);
 278
 279         if (HAS_PCH_SPLIT(dev)) {
 280                 intel_pch_panel_fitting(dev,
 281                                         intel_connector->panel.fitting_mode,
 282                                         mode, adjusted_mode);
 283                 return true;
 284         }
 285
 286         /* Native modes don't need fitting */
 287         if (adjusted_mode->hdisplay == mode->hdisplay &&
 288             adjusted_mode->vdisplay == mode->vdisplay)
 289                 goto out;
 290
 291         /* 965+ wants fuzzy fitting */
 292         if (INTEL_INFO(dev)->gen >= 4)
 293                 pfit_control |= ((intel_crtc->pipe << PFIT_PIPE_SHIFT) |
 294                                  PFIT_FILTER_FUZZY);
 295
 296         /*
 297          * Enable automatic panel scaling for non-native modes so that they fill
 298          * the screen.  Should be enabled before the pipe is enabled, according
 299          * to register description and PRM.
 300          * Change the value here to see the borders for debugging
 301          */
 302         for_each_pipe(pipe)
 303                 I915_WRITE(BCLRPAT(pipe), 0);
 304
 305         drm_mode_set_crtcinfo(adjusted_mode, 0);
 306
 307         switch (intel_connector->panel.fitting_mode) {
 308         case DRM_MODE_SCALE_CENTER:
 309                 /*
 310                  * For centered modes, we have to calculate border widths &
 311                  * heights and modify the values programmed into the CRTC.
 312                  */
 313                 centre_horizontally(adjusted_mode, mode->hdisplay);
 314                 centre_vertically(adjusted_mode, mode->vdisplay);
 315                 border = LVDS_BORDER_ENABLE;
 316                 break;
 317
 318         case DRM_MODE_SCALE_ASPECT:
 319                 /* Scale but preserve the aspect ratio */
 320                 if (INTEL_INFO(dev)->gen >= 4) {
 321                         u32 scaled_width = adjusted_mode->hdisplay * mode->vdisplay;
 322                         u32 scaled_height = mode->hdisplay * adjusted_mode->vdisplay;
 323
 324                         /* 965+ is easy, it does everything in hw */
 325                         if (scaled_width > scaled_height)
 326                                 pfit_control |= PFIT_ENABLE | PFIT_SCALING_PILLAR;
 327                         else if (scaled_width < scaled_height)
 328                                 pfit_control |= PFIT_ENABLE | PFIT_SCALING_LETTER;
 329                         else if (adjusted_mode->hdisplay != mode->hdisplay)
 330                                 pfit_control |= PFIT_ENABLE | PFIT_SCALING_AUTO;
 331                 } else {
 332                         u32 scaled_width = adjusted_mode->hdisplay * mode->vdisplay;
 333                         u32 scaled_height = mode->hdisplay * adjusted_mode->vdisplay;
 334                         /*
 335                          * For earlier chips we have to calculate the scaling
 336                          * ratio by hand and program it into the
 337                          * PFIT_PGM_RATIO register
 338                          */
 339                         if (scaled_width > scaled_height) { /* pillar */
 340                                 centre_horizontally(adjusted_mode, scaled_height / mode->vdisplay);
 341
 342                                 border = LVDS_BORDER_ENABLE;
 343                                 if (mode->vdisplay != adjusted_mode->vdisplay) {
 344                                         u32 bits = panel_fitter_scaling(mode->vdisplay, adjusted_mode->vdisplay);
 345                                         pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT |
 346                                                             bits << PFIT_VERT_SCALE_SHIFT);
 347                                         pfit_control |= (PFIT_ENABLE |
 348                                                          VERT_INTERP_BILINEAR |
 349                                                          HORIZ_INTERP_BILINEAR);
 350                                 }
 351                         } else if (scaled_width < scaled_height) { /* letter */
 352                                 centre_vertically(adjusted_mode, scaled_width / mode->hdisplay);
 353
 354                                 border = LVDS_BORDER_ENABLE;
 355                                 if (mode->hdisplay != adjusted_mode->hdisplay) {
 356                                         u32 bits = panel_fitter_scaling(mode->hdisplay, adjusted_mode->hdisplay);
 357                                         pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT |
 358                                                             bits << PFIT_VERT_SCALE_SHIFT);
 359                                         pfit_control |= (PFIT_ENABLE |
 360                                                          VERT_INTERP_BILINEAR |
 361                                                          HORIZ_INTERP_BILINEAR);
 362                                 }
 363                         } else
 364                                 /* Aspects match, Let hw scale both directions */
 365                                 pfit_control |= (PFIT_ENABLE |
 366                                                  VERT_AUTO_SCALE | HORIZ_AUTO_SCALE |
 367                                                  VERT_INTERP_BILINEAR |
 368                                                  HORIZ_INTERP_BILINEAR);
 369                 }
 370                 break;
 371
 372         case DRM_MODE_SCALE_FULLSCREEN:
 373                 /*
 374                  * Full scaling, even if it changes the aspect ratio.
 375                  * Fortunately this is all done for us in hw.
 376                  */
 377                 if (mode->vdisplay != adjusted_mode->vdisplay ||
 378                     mode->hdisplay != adjusted_mode->hdisplay) {
 379                         pfit_control |= PFIT_ENABLE;
 380                         if (INTEL_INFO(dev)->gen >= 4)
 381                                 pfit_control |= PFIT_SCALING_AUTO;
 382                         else
 383                                 pfit_control |= (VERT_AUTO_SCALE |
 384                                                  VERT_INTERP_BILINEAR |
 385                                                  HORIZ_AUTO_SCALE |
 386                                                  HORIZ_INTERP_BILINEAR);
 387                 }
 388                 break;
 389
 390         default:
 391                 break;
 392         }
 393
 394 out:
 395         /* If not enabling scaling, be consistent and always use 0. */
 396         if ((pfit_control & PFIT_ENABLE) == 0) {
 397                 pfit_control = 0;
 398                 pfit_pgm_ratios = 0;
 399         }
 400
 401         /* Make sure pre-965 set dither correctly */
 402         if (INTEL_INFO(dev)->gen < 4 && dev_priv->lvds_dither)
 403                 pfit_control |= PANEL_8TO6_DITHER_ENABLE;
 404
 405         if (pfit_control != lvds_encoder->pfit_control ||
 406             pfit_pgm_ratios != lvds_encoder->pfit_pgm_ratios) {
 407                 lvds_encoder->pfit_control = pfit_control;
 408                 lvds_encoder->pfit_pgm_ratios = pfit_pgm_ratios;
 409                 lvds_encoder->pfit_dirty = true;
 410         }
 411         dev_priv->lvds_border_bits = border;
 412
 413         /*
 414          * XXX: It would be nice to support lower refresh rates on the
 415          * panels to reduce power consumption, and perhaps match the
 416          * user's requested refresh rate.
 417          */
 418
 419         return true;
 420 }
 421
 422 static void intel_lvds_mode_set(struct drm_encoder *encoder,
 423                                 struct drm_display_mode *mode,
 424                                 struct drm_display_mode *adjusted_mode)
 425 {
 426         /*
 427          * The LVDS pin pair will already have been turned on in the
 428          * intel_crtc_mode_set since it has a large impact on the DPLL
 429          * settings.
 430          */
 431 }
 432
 433 /**
 434  * Detect the LVDS connection.
 435  *
 436  * Since LVDS doesn't have hotlug, we use the lid as a proxy.  Open means
 437  * connected and closed means disconnected.  We also send hotplug events as
 438  * needed, using lid status notification from the input layer.
 439  */
 440 static enum drm_connector_status
 441 intel_lvds_detect(struct drm_connector *connector, bool force)
 442 {
 443         struct drm_device *dev = connector->dev;
 444         enum drm_connector_status status;
 445
 446         status = intel_panel_detect(dev);
 447         if (status != connector_status_unknown)
 448                 return status;
 449
 450         return connector_status_connected;
 451 }
 452
 453 /**
 454  * Return the list of DDC modes if available, or the BIOS fixed mode otherwise.
 455  */
 456 static int intel_lvds_get_modes(struct drm_connector *connector)
 457 {
 458         struct intel_lvds_connector *lvds_connector = to_lvds_connector(connector);
 459         struct drm_device *dev = connector->dev;
 460         struct drm_display_mode *mode;
 461
 462         /* use cached edid if we have one */
 463         if (lvds_connector->base.edid)
 464                 return drm_add_edid_modes(connector, lvds_connector->base.edid);
 465
 466         mode = drm_mode_duplicate(dev, lvds_connector->base.panel.fixed_mode);
 467         if (mode == NULL)
 468                 return 0;
 469
 470         drm_mode_probed_add(connector, mode);
 471         return 1;
 472 }
 473
 474 static int intel_no_modeset_on_lid_dmi_callback(const struct dmi_system_id *id)
 475 {
 476         DRM_INFO("Skipping forced modeset for %s\n", id->ident);
 477         return 1;
 478 }
 479
 480 /* The GPU hangs up on these systems if modeset is performed on LID open */
 481 static const struct dmi_system_id intel_no_modeset_on_lid[] = {
 482         {
 483                 .callback = intel_no_modeset_on_lid_dmi_callback,
 484                 .ident = "Toshiba Tecra A11",
 485                 .matches = {
 486                         DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 487                         DMI_MATCH(DMI_PRODUCT_NAME, "TECRA A11"),
 488                 },
 489         },
 490
 491         { }     /* terminating entry */
 492 };
 493
 494 #ifdef FREEBSD_WIP
 495 /*
 496  * Lid events. Note the use of 'modeset_on_lid':
 497  *  - we set it on lid close, and reset it on open
 498  *  - we use it as a "only once" bit (ie we ignore
 499  *    duplicate events where it was already properly
 500  *    set/reset)
 501  *  - the suspend/resume paths will also set it to
 502  *    zero, since they restore the mode ("lid open").
 503  */
 504 static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
 505                             void *unused)
 506 {
 507         struct intel_lvds_connector *lvds_connector =
 508                 container_of(nb, struct intel_lvds_connector, lid_notifier);
 509         struct drm_connector *connector = &lvds_connector->base.base;
 510         struct drm_device *dev = connector->dev;
 511         struct drm_i915_private *dev_priv = dev->dev_private;
 512
 513         if (dev->switch_power_state != DRM_SWITCH_POWER_ON)
 514                 return NOTIFY_OK;
 515
 516         /*
 517          * check and update the status of LVDS connector after receiving
 518          * the LID nofication event.
 519          */
 520         connector->status = connector->funcs->detect(connector, false);
 521
 522         /* Don't force modeset on machines where it causes a GPU lockup */
 523         if (dmi_check_system(intel_no_modeset_on_lid))
 524                 return NOTIFY_OK;
 525         if (!acpi_lid_open()) {
 526                 dev_priv->modeset_on_lid = 1;
 527                 return NOTIFY_OK;
 528         }
 529
 530         if (!dev_priv->modeset_on_lid)
 531                 return NOTIFY_OK;
 532
 533         dev_priv->modeset_on_lid = 0;
 534
 535         mutex_lock(&dev->mode_config.mutex);
 536         intel_modeset_setup_hw_state(dev, true);
 537         mutex_unlock(&dev->mode_config.mutex);
 538
 539         return NOTIFY_OK;
 540 }
 541 #endif /* FREEBSD_WIP */
 542
 543 /**
 544  * intel_lvds_destroy - unregister and free LVDS structures
 545  * @connector: connector to free
 546  *
 547  * Unregister the DDC bus for this connector then free the driver private
 548  * structure.
 549  */
 550 static void intel_lvds_destroy(struct drm_connector *connector)
 551 {
 552         struct intel_lvds_connector *lvds_connector =
 553                 to_lvds_connector(connector);
 554
 555 #ifdef FREEBSD_WIP
 556         if (lvds_connector->lid_notifier.notifier_call)
 557                 acpi_lid_notifier_unregister(&lvds_connector->lid_notifier);
 558 #endif /* FREEBSD_WIP */
 559
 560         free(lvds_connector->base.edid, DRM_MEM_KMS);
 561
 562         intel_panel_fini(&lvds_connector->base.panel);
 563
 564         drm_connector_cleanup(connector);
 565         free(connector, DRM_MEM_KMS);
 566 }
 567
 568 static int intel_lvds_set_property(struct drm_connector *connector,
 569                                    struct drm_property *property,
 570                                    uint64_t value)
 571 {
 572         struct intel_connector *intel_connector = to_intel_connector(connector);
 573         struct drm_device *dev = connector->dev;
 574
 575         if (property == dev->mode_config.scaling_mode_property) {
 576                 struct drm_crtc *crtc;
 577
 578                 if (value == DRM_MODE_SCALE_NONE) {
 579                         DRM_DEBUG_KMS("no scaling not supported\n");
 580                         return -EINVAL;
 581                 }
 582
 583                 if (intel_connector->panel.fitting_mode == value) {
 584                         /* the LVDS scaling property is not changed */
 585                         return 0;
 586                 }
 587                 intel_connector->panel.fitting_mode = value;
 588
 589                 crtc = intel_attached_encoder(connector)->base.crtc;
 590                 if (crtc && crtc->enabled) {
 591                         /*
 592                          * If the CRTC is enabled, the display will be changed
 593                          * according to the new panel fitting mode.
 594                          */
 595                         intel_set_mode(crtc, &crtc->mode,
 596                                        crtc->x, crtc->y, crtc->fb);
 597                 }
 598         }
 599
 600         return 0;
 601 }
 602
 603 static const struct drm_encoder_helper_funcs intel_lvds_helper_funcs = {
 604         .mode_fixup = intel_lvds_mode_fixup,
 605         .mode_set = intel_lvds_mode_set,
 606         .disable = intel_encoder_noop,
 607 };
 608
 609 static const struct drm_connector_helper_funcs intel_lvds_connector_helper_funcs = {
 610         .get_modes = intel_lvds_get_modes,
 611         .mode_valid = intel_lvds_mode_valid,
 612         .best_encoder = intel_best_encoder,
 613 };
 614
 615 static const struct drm_connector_funcs intel_lvds_connector_funcs = {
 616         .dpms = intel_connector_dpms,
 617         .detect = intel_lvds_detect,
 618         .fill_modes = drm_helper_probe_single_connector_modes,
 619         .set_property = intel_lvds_set_property,
 620         .destroy = intel_lvds_destroy,
 621 };
 622
 623 static const struct drm_encoder_funcs intel_lvds_enc_funcs = {
 624         .destroy = intel_encoder_destroy,
 625 };
 626
 627 static int __init intel_no_lvds_dmi_callback(const struct dmi_system_id *id)
 628 {
 629         DRM_INFO("Skipping LVDS initialization for %s\n", id->ident);
 630         return 1;
 631 }
 632
 633 /* These systems claim to have LVDS, but really don't */
 634 static const struct dmi_system_id intel_no_lvds[] = {
 635         {
 636                 .callback = intel_no_lvds_dmi_callback,
 637                 .ident = "Apple Mac Mini (Core series)",
 638                 .matches = {
 639                         DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
 640                         DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
 641                 },
 642         },
 643         {
 644                 .callback = intel_no_lvds_dmi_callback,
 645                 .ident = "Apple Mac Mini (Core 2 series)",
 646                 .matches = {
 647                         DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
 648                         DMI_MATCH(DMI_PRODUCT_NAME, "Macmini2,1"),
 649                 },
 650         },
 651         {
 652                 .callback = intel_no_lvds_dmi_callback,
 653                 .ident = "MSI IM-945GSE-A",
 654                 .matches = {
 655                         DMI_MATCH(DMI_SYS_VENDOR, "MSI"),
 656                         DMI_MATCH(DMI_PRODUCT_NAME, "A9830IMS"),
 657                 },
 658         },
 659         {
 660                 .callback = intel_no_lvds_dmi_callback,
 661                 .ident = "Dell Studio Hybrid",
 662                 .matches = {
 663                         DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 664                         DMI_MATCH(DMI_PRODUCT_NAME, "Studio Hybrid 140g"),
 665                 },
 666         },
 667         {
 668                 .callback = intel_no_lvds_dmi_callback,
 669                 .ident = "Dell OptiPlex FX170",
 670                 .matches = {
 671                         DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 672                         DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex FX170"),
 673                 },
 674         },
 675         {
 676                 .callback = intel_no_lvds_dmi_callback,
 677                 .ident = "AOpen Mini PC",
 678                 .matches = {
 679                         DMI_MATCH(DMI_SYS_VENDOR, "AOpen"),
 680                         DMI_MATCH(DMI_PRODUCT_NAME, "i965GMx-IF"),
 681                 },
 682         },
 683         {
 684                 .callback = intel_no_lvds_dmi_callback,
 685                 .ident = "AOpen Mini PC MP915",
 686                 .matches = {
 687                         DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
 688                         DMI_MATCH(DMI_BOARD_NAME, "i915GMx-F"),
 689                 },
 690         },
 691         {
 692                 .callback = intel_no_lvds_dmi_callback,
 693                 .ident = "AOpen i915GMm-HFS",
 694                 .matches = {
 695                         DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
 696                         DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"),
 697                 },
 698         },
 699         {
 700                 .callback = intel_no_lvds_dmi_callback,
 701                 .ident = "AOpen i45GMx-I",
 702                 .matches = {
 703                         DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
 704                         DMI_MATCH(DMI_BOARD_NAME, "i45GMx-I"),
 705                 },
 706         },
 707         {
 708                 .callback = intel_no_lvds_dmi_callback,
 709                 .ident = "Aopen i945GTt-VFA",
 710                 .matches = {
 711                         DMI_MATCH(DMI_PRODUCT_VERSION, "AO00001JW"),
 712                 },
 713         },
 714         {
 715                 .callback = intel_no_lvds_dmi_callback,
 716                 .ident = "Clientron U800",
 717                 .matches = {
 718                         DMI_MATCH(DMI_SYS_VENDOR, "Clientron"),
 719                         DMI_MATCH(DMI_PRODUCT_NAME, "U800"),
 720                 },
 721         },
 722         {
 723                 .callback = intel_no_lvds_dmi_callback,
 724                 .ident = "Clientron E830",
 725                 .matches = {
 726                         DMI_MATCH(DMI_SYS_VENDOR, "Clientron"),
 727                         DMI_MATCH(DMI_PRODUCT_NAME, "E830"),
 728                 },
 729         },
 730         {
 731                 .callback = intel_no_lvds_dmi_callback,
 732                 .ident = "Asus EeeBox PC EB1007",
 733                 .matches = {
 734                         DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer INC."),
 735                         DMI_MATCH(DMI_PRODUCT_NAME, "EB1007"),
 736                 },
 737         },
 738         {
 739                 .callback = intel_no_lvds_dmi_callback,
 740                 .ident = "Asus AT5NM10T-I",
 741                 .matches = {
 742                         DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
 743                         DMI_MATCH(DMI_BOARD_NAME, "AT5NM10T-I"),
 744                 },
 745         },
 746         {
 747                 .callback = intel_no_lvds_dmi_callback,
 748                 .ident = "Hewlett-Packard HP t5740e Thin Client",
 749                 .matches = {
 750                         DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
 751                         DMI_MATCH(DMI_PRODUCT_NAME, "HP t5740e Thin Client"),
 752                 },
 753         },
 754         {
 755                 .callback = intel_no_lvds_dmi_callback,
 756                 .ident = "Hewlett-Packard t5745",
 757                 .matches = {
 758                         DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
 759                         DMI_MATCH(DMI_PRODUCT_NAME, "hp t5745"),
 760                 },
 761         },
 762         {
 763                 .callback = intel_no_lvds_dmi_callback,
 764                 .ident = "Hewlett-Packard st5747",
 765                 .matches = {
 766                         DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
 767                         DMI_MATCH(DMI_PRODUCT_NAME, "hp st5747"),
 768                 },
 769         },
 770         {
 771                 .callback = intel_no_lvds_dmi_callback,
 772                 .ident = "MSI Wind Box DC500",
 773                 .matches = {
 774                         DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
 775                         DMI_MATCH(DMI_BOARD_NAME, "MS-7469"),
 776                 },
 777         },
 778         {
 779                 .callback = intel_no_lvds_dmi_callback,
 780                 .ident = "Gigabyte GA-D525TUD",
 781                 .matches = {
 782                         DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."),
 783                         DMI_MATCH(DMI_BOARD_NAME, "D525TUD"),
 784                 },
 785         },
 786         {
 787                 .callback = intel_no_lvds_dmi_callback,
 788                 .ident = "Supermicro X7SPA-H",
 789                 .matches = {
 790                         DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"),
 791                         DMI_MATCH(DMI_PRODUCT_NAME, "X7SPA-H"),
 792                 },
 793         },
 794         {
 795                 .callback = intel_no_lvds_dmi_callback,
 796                 .ident = "Fujitsu Esprimo Q900",
 797                 .matches = {
 798                         DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
 799                         DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Q900"),
 800                 },
 801         },
 802
 803         { }     /* terminating entry */
 804 };
 805
 806 /**
 807  * intel_find_lvds_downclock - find the reduced downclock for LVDS in EDID
 808  * @dev: drm device
 809  * @connector: LVDS connector
 810  *
 811  * Find the reduced downclock for LVDS in EDID.
 812  */
 813 static void intel_find_lvds_downclock(struct drm_device *dev,
 814                                       struct drm_display_mode *fixed_mode,
 815                                       struct drm_connector *connector)
 816 {
 817         struct drm_i915_private *dev_priv = dev->dev_private;
 818         struct drm_display_mode *scan;
 819         int temp_downclock;
 820
 821         temp_downclock = fixed_mode->clock;
 822         list_for_each_entry(scan, &connector->probed_modes, head) {
 823                 /*
 824                  * If one mode has the same resolution with the fixed_panel
 825                  * mode while they have the different refresh rate, it means
 826                  * that the reduced downclock is found for the LVDS. In such
 827                  * case we can set the different FPx0/1 to dynamically select
 828                  * between low and high frequency.
 829                  */
 830                 if (scan->hdisplay == fixed_mode->hdisplay &&
 831                     scan->hsync_start == fixed_mode->hsync_start &&
 832                     scan->hsync_end == fixed_mode->hsync_end &&
 833                     scan->htotal == fixed_mode->htotal &&
 834                     scan->vdisplay == fixed_mode->vdisplay &&
 835                     scan->vsync_start == fixed_mode->vsync_start &&
 836                     scan->vsync_end == fixed_mode->vsync_end &&
 837                     scan->vtotal == fixed_mode->vtotal) {
 838                         if (scan->clock < temp_downclock) {
 839                                 /*
 840                                  * The downclock is already found. But we
 841                                  * expect to find the lower downclock.
 842                                  */
 843                                 temp_downclock = scan->clock;
 844                         }
 845                 }
 846         }
 847         if (temp_downclock < fixed_mode->clock && i915_lvds_downclock) {
 848                 /* We found the downclock for LVDS. */
 849                 dev_priv->lvds_downclock_avail = 1;
 850                 dev_priv->lvds_downclock = temp_downclock;
 851                 DRM_DEBUG_KMS("LVDS downclock is found in EDID. "
 852                               "Normal clock %dKhz, downclock %dKhz\n",
 853                               fixed_mode->clock, temp_downclock);
 854         }
 855 }
 856
 857 /*
 858  * Enumerate the child dev array parsed from VBT to check whether
 859  * the LVDS is present.
 860  * If it is present, return 1.
 861  * If it is not present, return false.
 862  * If no child dev is parsed from VBT, it assumes that the LVDS is present.
 863  */
 864 static bool lvds_is_present_in_vbt(struct drm_device *dev,
 865                                    u8 *i2c_pin)
 866 {
 867         struct drm_i915_private *dev_priv = dev->dev_private;
 868         int i;
 869
 870         if (!dev_priv->child_dev_num)
 871                 return true;
 872
 873         for (i = 0; i < dev_priv->child_dev_num; i++) {
 874                 struct child_device_config *child = dev_priv->child_dev + i;
 875
 876                 /* If the device type is not LFP, continue.
 877                  * We have to check both the new identifiers as well as the
 878                  * old for compatibility with some BIOSes.
 879                  */
 880                 if (child->device_type != DEVICE_TYPE_INT_LFP &&
 881                     child->device_type != DEVICE_TYPE_LFP)
 882                         continue;
 883
 884                 if (intel_gmbus_is_port_valid(child->i2c_pin))
 885                         *i2c_pin = child->i2c_pin;
 886
 887                 /* However, we cannot trust the BIOS writers to populate
 888                  * the VBT correctly.  Since LVDS requires additional
 889                  * information from AIM blocks, a non-zero addin offset is
 890                  * a good indicator that the LVDS is actually present.
 891                  */
 892                 if (child->addin_offset)
 893                         return true;
 894
 895                 /* But even then some BIOS writers perform some black magic
 896                  * and instantiate the device without reference to any
 897                  * additional data.  Trust that if the VBT was written into
 898                  * the OpRegion then they have validated the LVDS's existence.
 899                  */
 900                 if (dev_priv->opregion.vbt)
 901                         return true;
 902         }
 903
 904         return false;
 905 }
 906
 907 static bool intel_lvds_supported(struct drm_device *dev)
 908 {
 909         /* With the introduction of the PCH we gained a dedicated
 910          * LVDS presence pin, use it. */
 911         if (HAS_PCH_SPLIT(dev))
 912                 return true;
 913
 914         /* Otherwise LVDS was only attached to mobile products,
 915          * except for the inglorious 830gm */
 916         return IS_MOBILE(dev) && !IS_I830(dev);
 917 }
 918
 919 /**
 920  * intel_lvds_init - setup LVDS connectors on this device
 921  * @dev: drm device
 922  *
 923  * Create the connector, register the LVDS DDC bus, and try to figure out what
 924  * modes we can display on the LVDS panel (if present).
 925  */
 926 bool intel_lvds_init(struct drm_device *dev)
 927 {
 928         struct drm_i915_private *dev_priv = dev->dev_private;
 929         struct intel_lvds_encoder *lvds_encoder;
 930         struct intel_encoder *intel_encoder;
 931         struct intel_lvds_connector *lvds_connector;
 932         struct intel_connector *intel_connector;
 933         struct drm_connector *connector;
 934         struct drm_encoder *encoder;
 935         struct drm_display_mode *scan; /* *modes, *bios_mode; */
 936         struct drm_display_mode *fixed_mode = NULL;
 937         struct edid *edid;
 938         int edid_err = 0;
 939         struct drm_crtc *crtc;
 940         u32 lvds;
 941         int pipe;
 942         u8 pin;
 943
 944         if (!intel_lvds_supported(dev))
 945                 return false;
 946
 947         /* Skip init on machines we know falsely report LVDS */
 948         if (dmi_check_system(intel_no_lvds))
 949                 return false;
 950
 951         pin = GMBUS_PORT_PANEL;
 952         if (!lvds_is_present_in_vbt(dev, &pin)) {
 953                 DRM_DEBUG_KMS("LVDS is not present in VBT\n");
 954                 return false;
 955         }
 956
 957         if (HAS_PCH_SPLIT(dev)) {
 958                 if ((I915_READ(PCH_LVDS) & LVDS_DETECTED) == 0)
 959                         return false;
 960                 if (dev_priv->edp.support) {
 961                         DRM_DEBUG_KMS("disable LVDS for eDP support\n");
 962                         return false;
 963                 }
 964         }
 965
 966         lvds_encoder = malloc(sizeof(struct intel_lvds_encoder), DRM_MEM_KMS, M_WAITOK | M_ZERO);
 967         if (!lvds_encoder)
 968                 return false;
 969
 970         lvds_connector = malloc(sizeof(struct intel_lvds_connector), DRM_MEM_KMS, M_WAITOK | M_ZERO);
 971         if (!lvds_connector) {
 972                 free(lvds_encoder, DRM_MEM_KMS);
 973                 return false;
 974         }
 975
 976         lvds_encoder->attached_connector = lvds_connector;
 977
 978         if (!HAS_PCH_SPLIT(dev)) {
 979                 lvds_encoder->pfit_control = I915_READ(PFIT_CONTROL);
 980         }
 981
 982         intel_encoder = &lvds_encoder->base;
 983         encoder = &intel_encoder->base;
 984         intel_connector = &lvds_connector->base;
 985         connector = &intel_connector->base;
 986         drm_connector_init(dev, &intel_connector->base, &intel_lvds_connector_funcs,
 987                            DRM_MODE_CONNECTOR_LVDS);
 988
 989         drm_encoder_init(dev, &intel_encoder->base, &intel_lvds_enc_funcs,
 990                          DRM_MODE_ENCODER_LVDS);
 991
 992         intel_encoder->enable = intel_enable_lvds;
 993         intel_encoder->disable = intel_disable_lvds;
 994         intel_encoder->get_hw_state = intel_lvds_get_hw_state;
 995         intel_connector->get_hw_state = intel_connector_get_hw_state;
 996
 997         intel_connector_attach_encoder(intel_connector, intel_encoder);
 998         intel_encoder->type = INTEL_OUTPUT_LVDS;
 999
1000         intel_encoder->cloneable = false;
1001         if (HAS_PCH_SPLIT(dev))
1002                 intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
1003         else if (IS_GEN4(dev))
1004                 intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
1005         else
1006                 intel_encoder->crtc_mask = (1 << 1);
1007
1008         drm_encoder_helper_add(encoder, &intel_lvds_helper_funcs);
1009         drm_connector_helper_add(connector, &intel_lvds_connector_helper_funcs);
1010         connector->display_info.subpixel_order = SubPixelHorizontalRGB;
1011         connector->interlace_allowed = false;
1012         connector->doublescan_allowed = false;
1013
1014         /* create the scaling mode property */
1015         drm_mode_create_scaling_mode_property(dev);
1016         drm_object_attach_property(&connector->base,
1017                                       dev->mode_config.scaling_mode_property,
1018                                       DRM_MODE_SCALE_ASPECT);
1019         intel_connector->panel.fitting_mode = DRM_MODE_SCALE_ASPECT;
1020         /*
1021          * LVDS discovery:
1022          * 1) check for EDID on DDC
1023          * 2) check for VBT data
1024          * 3) check to see if LVDS is already on
1025          *    if none of the above, no panel
1026          * 4) make sure lid is open
1027          *    if closed, act like it's not there for now
1028          */
1029
1030         /*
1031          * Attempt to get the fixed panel mode from DDC.  Assume that the
1032          * preferred mode is the right one.
1033          */
1034         edid = drm_get_edid(connector, intel_gmbus_get_adapter(dev_priv, pin));
1035         if (edid) {
1036                 if (drm_add_edid_modes(connector, edid)) {
1037                         drm_mode_connector_update_edid_property(connector,
1038                                                                 edid);
1039                 } else {
1040                         free(edid, DRM_MEM_KMS);
1041                         edid = NULL;
1042                         edid_err = -EINVAL;
1043                 }
1044         } else {
1045                 edid = NULL;
1046                 edid_err = -ENOENT;
1047         }
1048         lvds_connector->base.edid = edid;
1049         lvds_connector->base.edid_err = edid_err;
1050
1051         if (edid_err) {
1052                 /* Didn't get an EDID, so
1053                  * Set wide sync ranges so we get all modes
1054                  * handed to valid_mode for checking
1055                  */
1056                 connector->display_info.min_vfreq = 0;
1057                 connector->display_info.max_vfreq = 200;
1058                 connector->display_info.min_hfreq = 0;
1059                 connector->display_info.max_hfreq = 200;
1060         }
1061
1062         list_for_each_entry(scan, &connector->probed_modes, head) {
1063                 if (scan->type & DRM_MODE_TYPE_PREFERRED) {
1064                         DRM_DEBUG_KMS("using preferred mode from EDID: ");
1065                         drm_mode_debug_printmodeline(scan);
1066
1067                         fixed_mode = drm_mode_duplicate(dev, scan);
1068                         if (fixed_mode) {
1069                                 intel_find_lvds_downclock(dev, fixed_mode,
1070                                                           connector);
1071                                 goto out;
1072                         }
1073                 }
1074         }
1075
1076         /* Failed to get EDID, what about VBT? */
1077         if (dev_priv->lfp_lvds_vbt_mode) {
1078                 DRM_DEBUG_KMS("using mode from VBT: ");
1079                 drm_mode_debug_printmodeline(dev_priv->lfp_lvds_vbt_mode);
1080
1081                 fixed_mode = drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
1082                 if (fixed_mode) {
1083                         fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
1084                         goto out;
1085                 }
1086         }
1087
1088         /*
1089          * If we didn't get EDID, try checking if the panel is already turned
1090          * on.  If so, assume that whatever is currently programmed is the
1091          * correct mode.
1092          */
1093
1094         /* Ironlake: FIXME if still fail, not try pipe mode now */
1095         if (HAS_PCH_SPLIT(dev))
1096                 goto failed;
1097
1098         lvds = I915_READ(LVDS);
1099         pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0;
1100         crtc = intel_get_crtc_for_pipe(dev, pipe);
1101
1102         if (crtc && (lvds & LVDS_PORT_EN)) {
1103                 fixed_mode = intel_crtc_mode_get(dev, crtc);
1104                 if (fixed_mode) {
1105                         DRM_DEBUG_KMS("using current (BIOS) mode: ");
1106                         drm_mode_debug_printmodeline(fixed_mode);
1107                         fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
1108                         goto out;
1109                 }
1110         }
1111
1112         /* If we still don't have a mode after all that, give up. */
1113         if (!fixed_mode)
1114                 goto failed;
1115
1116 out:
1117         /*
1118          * Unlock registers and just
1119          * leave them unlocked
1120          */
1121         if (HAS_PCH_SPLIT(dev)) {
1122                 I915_WRITE(PCH_PP_CONTROL,
1123                            I915_READ(PCH_PP_CONTROL) | PANEL_UNLOCK_REGS);
1124         } else {
1125                 I915_WRITE(PP_CONTROL,
1126                            I915_READ(PP_CONTROL) | PANEL_UNLOCK_REGS);
1127         }
1128 #ifdef FREEBSD_WIP
1129         lvds_connector->lid_notifier.notifier_call = intel_lid_notify;
1130         if (acpi_lid_notifier_register(&lvds_connector->lid_notifier)) {
1131                 DRM_DEBUG_KMS("lid notifier registration failed\n");
1132                 lvds_connector->lid_notifier.notifier_call = NULL;
1133         }
1134 #endif /* FREEBSD_WIP */
1135
1136         intel_panel_init(&intel_connector->panel, fixed_mode);
1137         intel_panel_setup_backlight(connector);
1138
1139         return true;
1140
1141 failed:
1142         DRM_DEBUG_KMS("No LVDS modes found, disabling.\n");
1143         drm_connector_cleanup(connector);
1144         drm_encoder_cleanup(encoder);
1145         if (fixed_mode)
1146                 drm_mode_destroy(dev, fixed_mode);
1147         free(lvds_encoder, DRM_MEM_KMS);
1148         free(lvds_connector, DRM_MEM_KMS);
1149         return false;
1150 }