2 * Copyright (c) 2005, M. Warner Losh
4 * Copyright (c) 1995, David Greenman
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice unmodified, this list of conditions, and the following
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31 #include <sys/cdefs.h>
32 __FBSDID("$FreeBSD$");
36 #include <sys/param.h>
37 #include <sys/systm.h>
38 #include <sys/sockio.h>
40 #include <sys/kernel.h>
41 #include <sys/socket.h>
42 #include <sys/syslog.h>
46 #include <machine/bus.h>
48 #include <machine/resource.h>
50 #include <net/ethernet.h>
52 #include <net/if_arp.h>
53 #include <net/if_dl.h>
54 #include <net/if_mib.h>
55 #include <net/if_media.h>
59 #include <dev/ed/if_edreg.h>
60 #include <dev/ed/if_edvar.h>
62 static int ed_probe_gwether(device_t);
65 * Probe and vendor-specific initialization routine for NE1000/2000 boards
68 ed_probe_Novell_generic(device_t dev, int flags)
70 struct ed_softc *sc = device_get_softc(dev);
74 static char test_pattern[32] = "THIS is A memory TEST pattern";
78 if (ED_FLAGS_GETTYPE(flags) == ED_FLAGS_GWETHER) {
79 ed_asic_outb(sc, ED_NOVELL_RESET, 0);
82 tmp = ed_asic_inb(sc, ED_NOVELL_RESET);
85 * I don't know if this is necessary; probably cruft leftover from
86 * Clarkson packet driver code. Doesn't do a thing on the boards I've
89 ed_asic_outb(sc, ED_NOVELL_RESET, tmp);
93 * This is needed because some NE clones apparently don't reset the
94 * NIC properly (or the NIC chip doesn't reset fully on power-up) XXX
95 * - this makes the probe invasive! ...Done against my better
98 ed_nic_outb(sc, ED_P0_CR, ED_CR_RD2 | ED_CR_STP);
101 /* Make sure that we really have an 8390 based board */
102 if (!ed_probe_generic8390(sc))
105 sc->vendor = ED_VENDOR_NOVELL;
107 sc->cr_proto = ED_CR_RD2;
110 * Test the ability to read and write to the NIC memory. This has the
111 * side affect of determining if this is an NE1000 or an NE2000.
115 * This prevents packets from being stored in the NIC memory when the
116 * readmem routine turns on the start bit in the CR.
118 ed_nic_outb(sc, ED_P0_RCR, ED_RCR_MON);
120 /* Temporarily initialize DCR for byte operations */
121 ed_nic_outb(sc, ED_P0_DCR, ED_DCR_FT1 | ED_DCR_LS);
123 ed_nic_outb(sc, ED_P0_PSTART, 8192 / ED_PAGE_SIZE);
124 ed_nic_outb(sc, ED_P0_PSTOP, 16384 / ED_PAGE_SIZE);
127 * Some devices identify themselves. Some of those devices
128 * can't handle being probed, so we allow forcing a mode. If
129 * these flags are set, force it, otherwise probe.
131 if (flags & ED_FLAGS_FORCE_8BIT_MODE) {
133 sc->type = ED_TYPE_NE1000;
134 sc->type_str = "NE1000";
135 } else if (flags & ED_FLAGS_FORCE_16BIT_MODE) {
137 sc->type = ED_TYPE_NE2000;
138 sc->type_str = "NE2000";
139 ed_nic_outb(sc, ED_P0_DCR, ED_DCR_WTS | ED_DCR_FT1 | ED_DCR_LS);
140 ed_nic_outb(sc, ED_P0_PSTART, 16384 / ED_PAGE_SIZE);
141 ed_nic_outb(sc, ED_P0_PSTOP, 32768 / ED_PAGE_SIZE);
144 * Write a test pattern in byte mode. If this fails, then there
145 * probably isn't any memory at 8k - which likely means that the board
148 ed_pio_writemem(sc, test_pattern, 8192, sizeof(test_pattern));
149 ed_pio_readmem(sc, 8192, test_buffer, sizeof(test_pattern));
151 if (bcmp(test_pattern, test_buffer, sizeof(test_pattern)) == 0) {
152 sc->type = ED_TYPE_NE1000;
153 sc->type_str = "NE1000";
156 /* Not an NE1000 - try NE2000 */
158 ed_nic_outb(sc, ED_P0_DCR, ED_DCR_WTS | ED_DCR_FT1 | ED_DCR_LS);
159 ed_nic_outb(sc, ED_P0_PSTART, 16384 / ED_PAGE_SIZE);
160 ed_nic_outb(sc, ED_P0_PSTOP, 32768 / ED_PAGE_SIZE);
162 * Write a test pattern in word mode. If this also fails, then
163 * we don't know what this board is.
165 ed_pio_writemem(sc, test_pattern, 16384, sizeof(test_pattern));
166 ed_pio_readmem(sc, 16384, test_buffer, sizeof(test_pattern));
167 if (bcmp(test_pattern, test_buffer, sizeof(test_pattern)) == 0) {
168 sc->type = ED_TYPE_NE2000;
169 sc->type_str = "NE2000";
175 sc->chip_type = ED_CHIP_TYPE_DP8390;
177 /* 8k of memory plus an additional 8k if 16bit */
178 memsize = 8192 + sc->isa16bit * 8192;
179 sc->mem_size = memsize;
181 /* NIC memory doesn't start at zero on an NE board */
182 /* The start address is tied to the bus width */
183 sc->mem_start = 8192 + sc->isa16bit * 8192;
184 sc->mem_end = sc->mem_start + memsize;
185 sc->tx_page_start = memsize / ED_PAGE_SIZE;
187 if (ED_FLAGS_GETTYPE(flags) == ED_FLAGS_GWETHER) {
188 error = ed_probe_gwether(dev);
194 * Use one xmit buffer if < 16k, two buffers otherwise (if not told
197 if ((memsize < 16384) || (flags & ED_FLAGS_NO_MULTI_BUFFERING))
202 sc->rec_page_start = sc->tx_page_start + sc->txb_cnt * ED_TXBUF_SIZE;
203 sc->rec_page_stop = sc->tx_page_start + memsize / ED_PAGE_SIZE;
205 sc->mem_ring = sc->mem_start + sc->txb_cnt * ED_PAGE_SIZE * ED_TXBUF_SIZE;
206 /* clear any pending interrupts that might have occurred above */
207 ed_nic_outb(sc, ED_P0_ISR, 0xff);
209 sc->sc_write_mbufs = ed_pio_write_mbufs;
214 ed_probe_Novell(device_t dev, int port_rid, int flags)
216 struct ed_softc *sc = device_get_softc(dev);
219 error = ed_alloc_port(dev, port_rid, ED_NOVELL_IO_PORTS);
223 sc->asic_offset = ED_NOVELL_ASIC_OFFSET;
224 sc->nic_offset = ED_NOVELL_NIC_OFFSET;
226 return ed_probe_Novell_generic(dev, flags);
230 ed_probe_gwether(device_t dev)
233 bus_size_t mstart = 0;
234 char pbuf0[ED_PAGE_SIZE], pbuf[ED_PAGE_SIZE], tbuf[ED_PAGE_SIZE];
235 struct ed_softc *sc = device_get_softc(dev);
237 for (i = 0; i < ED_PAGE_SIZE; i++)
240 /* Clear all the memory. */
241 for (x = 1; x < 256; x++)
242 ed_pio_writemem(sc, pbuf0, x * 256, ED_PAGE_SIZE);
244 /* Search for the start of RAM. */
245 for (x = 1; x < 256; x++) {
246 ed_pio_readmem(sc, x * 256, tbuf, ED_PAGE_SIZE);
247 if (bcmp(pbuf0, tbuf, ED_PAGE_SIZE) == 0) {
248 for (i = 0; i < ED_PAGE_SIZE; i++)
250 ed_pio_writemem(sc, pbuf, x * 256, ED_PAGE_SIZE);
251 ed_pio_readmem(sc, x * 256, tbuf, ED_PAGE_SIZE);
252 if (bcmp(pbuf, tbuf, ED_PAGE_SIZE) == 0) {
253 mstart = x * ED_PAGE_SIZE;
254 msize = ED_PAGE_SIZE;
260 device_printf(dev, "Cannot find start of RAM.\n");
264 /* Probe the size of RAM. */
265 for (x = (mstart / ED_PAGE_SIZE) + 1; x < 256; x++) {
266 ed_pio_readmem(sc, x * 256, tbuf, ED_PAGE_SIZE);
267 if (bcmp(pbuf0, tbuf, ED_PAGE_SIZE) == 0) {
268 for (i = 0; i < ED_PAGE_SIZE; i++)
270 ed_pio_writemem(sc, pbuf, x * 256, ED_PAGE_SIZE);
271 ed_pio_readmem(sc, x * 256, tbuf, ED_PAGE_SIZE);
272 if (bcmp(pbuf, tbuf, ED_PAGE_SIZE) == 0)
273 msize += ED_PAGE_SIZE;
284 "Cannot find any RAM, start : %d, x = %d.\n",
290 "RAM start at %d, size : %d.\n", (int)mstart, msize);
292 sc->mem_size = msize;
293 sc->mem_start = mstart;
294 sc->mem_end = msize + mstart;
295 sc->tx_page_start = mstart / ED_PAGE_SIZE;
300 ed_Novell_read_mac(struct ed_softc *sc)
306 * Most ne1000/ne2000 compatible cards have their MAC address
307 * located in the first few words of the address space. This seems
308 * universally true for ISA and PCI implementations, but PC Card
309 * devices seem to have more variance.
311 ed_pio_readmem(sc, 0, romdata, 16);
312 for (n = 0; n < ETHER_ADDR_LEN; n++)
313 sc->enaddr[n] = romdata[n * (sc->isa16bit + 1)];