2 * Copyright (c) 2004 Scott Long
3 * Copyright (c) 2005, 2008 Marius Strobl <marius@FreeBSD.org>
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
29 /* $NetBSD: ncr53c9x.c,v 1.145 2012/06/18 21:23:56 martin Exp $ */
32 * Copyright (c) 1998, 2002 The NetBSD Foundation, Inc.
33 * All rights reserved.
35 * This code is derived from software contributed to The NetBSD Foundation
36 * by Charles M. Hannum.
38 * Redistribution and use in source and binary forms, with or without
39 * modification, are permitted provided that the following conditions
41 * 1. Redistributions of source code must retain the above copyright
42 * notice, this list of conditions and the following disclaimer.
43 * 2. Redistributions in binary form must reproduce the above copyright
44 * notice, this list of conditions and the following disclaimer in the
45 * documentation and/or other materials provided with the distribution.
47 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
48 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
49 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
50 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
51 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
52 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
53 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
54 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
55 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
56 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
57 * POSSIBILITY OF SUCH DAMAGE.
61 * Copyright (c) 1994 Peter Galbavy
62 * Copyright (c) 1995 Paul Kranenburg
63 * All rights reserved.
65 * Redistribution and use in source and binary forms, with or without
66 * modification, are permitted provided that the following conditions
68 * 1. Redistributions of source code must retain the above copyright
69 * notice, this list of conditions and the following disclaimer.
70 * 2. Redistributions in binary form must reproduce the above copyright
71 * notice, this list of conditions and the following disclaimer in the
72 * documentation and/or other materials provided with the distribution.
73 * 3. All advertising materials mentioning features or use of this software
74 * must display the following acknowledgement:
75 * This product includes software developed by Peter Galbavy
76 * 4. The name of the author may not be used to endorse or promote products
77 * derived from this software without specific prior written permission.
79 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
80 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
81 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
82 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
83 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
84 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
85 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
86 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
87 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
88 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
89 * POSSIBILITY OF SUCH DAMAGE.
93 * Based on aic6360 by Jarle Greipsland
95 * Acknowledgements: Many of the algorithms used in this driver are
96 * inspired by the work of Julian Elischer (julian@FreeBSD.org) and
97 * Charles Hannum (mycroft@duality.gnu.ai.mit.edu). Thanks a million!
100 #include <sys/cdefs.h>
101 __FBSDID("$FreeBSD$");
103 #include <sys/param.h>
104 #include <sys/systm.h>
106 #include <sys/kernel.h>
107 #include <sys/malloc.h>
108 #include <sys/lock.h>
109 #include <sys/module.h>
110 #include <sys/mutex.h>
111 #include <sys/queue.h>
112 #include <sys/time.h>
113 #include <sys/callout.h>
116 #include <cam/cam_ccb.h>
117 #include <cam/cam_debug.h>
118 #include <cam/cam_sim.h>
119 #include <cam/cam_xpt_sim.h>
120 #include <cam/scsi/scsi_all.h>
121 #include <cam/scsi/scsi_message.h>
123 #include <dev/esp/ncr53c9xreg.h>
124 #include <dev/esp/ncr53c9xvar.h>
126 devclass_t esp_devclass;
128 MODULE_DEPEND(esp, cam, 1, 1, 1);
130 #ifdef NCR53C9X_DEBUG
132 NCR_SHOWMISC /* | NCR_SHOWPHASE | NCR_SHOWTRAC | NCR_SHOWCMDS */;
135 static void ncr53c9x_abort(struct ncr53c9x_softc *sc,
136 struct ncr53c9x_ecb *ecb);
137 static void ncr53c9x_action(struct cam_sim *sim, union ccb *ccb);
138 static void ncr53c9x_async(void *cbarg, uint32_t code,
139 struct cam_path *path, void *arg);
140 static void ncr53c9x_callout(void *arg);
141 static void ncr53c9x_clear(struct ncr53c9x_softc *sc, cam_status result);
142 static void ncr53c9x_clear_target(struct ncr53c9x_softc *sc, int target,
144 static void ncr53c9x_dequeue(struct ncr53c9x_softc *sc,
145 struct ncr53c9x_ecb *ecb);
146 static void ncr53c9x_done(struct ncr53c9x_softc *sc,
147 struct ncr53c9x_ecb *ecb);
148 static void ncr53c9x_free_ecb(struct ncr53c9x_softc *sc,
149 struct ncr53c9x_ecb *ecb);
150 static void ncr53c9x_msgin(struct ncr53c9x_softc *sc);
151 static void ncr53c9x_msgout(struct ncr53c9x_softc *sc);
152 static void ncr53c9x_init(struct ncr53c9x_softc *sc, int doreset);
153 static void ncr53c9x_intr1(struct ncr53c9x_softc *sc);
154 static void ncr53c9x_poll(struct cam_sim *sim);
155 static int ncr53c9x_rdfifo(struct ncr53c9x_softc *sc, int how);
156 static int ncr53c9x_reselect(struct ncr53c9x_softc *sc, int message,
157 int tagtype, int tagid);
158 static void ncr53c9x_reset(struct ncr53c9x_softc *sc);
159 static void ncr53c9x_sense(struct ncr53c9x_softc *sc,
160 struct ncr53c9x_ecb *ecb);
161 static void ncr53c9x_sched(struct ncr53c9x_softc *sc);
162 static void ncr53c9x_select(struct ncr53c9x_softc *sc,
163 struct ncr53c9x_ecb *ecb);
164 static void ncr53c9x_watch(void *arg);
165 static void ncr53c9x_wrfifo(struct ncr53c9x_softc *sc, uint8_t *p,
168 static struct ncr53c9x_ecb *ncr53c9x_get_ecb(struct ncr53c9x_softc *sc);
169 static struct ncr53c9x_linfo *ncr53c9x_lunsearch(struct ncr53c9x_tinfo *sc,
172 static inline void ncr53c9x_readregs(struct ncr53c9x_softc *sc);
173 static inline void ncr53c9x_setsync(struct ncr53c9x_softc *sc,
174 struct ncr53c9x_tinfo *ti);
175 static inline int ncr53c9x_stp2cpb(struct ncr53c9x_softc *sc,
178 #define NCR_RDFIFO_START 0
179 #define NCR_RDFIFO_CONTINUE 1
181 #define NCR_SET_COUNT(sc, size) do { \
182 NCR_WRITE_REG((sc), NCR_TCL, (size)); \
183 NCR_WRITE_REG((sc), NCR_TCM, (size) >> 8); \
184 if ((sc->sc_features & NCR_F_LARGEXFER) != 0) \
185 NCR_WRITE_REG((sc), NCR_TCH, (size) >> 16); \
186 if (sc->sc_rev == NCR_VARIANT_FAS366) \
187 NCR_WRITE_REG(sc, NCR_RCH, 0); \
188 } while (/* CONSTCOND */0)
192 (((ms) < 0x20000) ? \
193 ((ms +0u) / 1000u) * hz : \
194 ((ms +0u) * hz) /1000u)
198 * Names for the NCR53c9x variants, corresponding to the variant tags
201 static const char *ncr53c9x_variant_names[] = {
218 * Search linked list for LUN info by LUN id.
220 static struct ncr53c9x_linfo *
221 ncr53c9x_lunsearch(struct ncr53c9x_tinfo *ti, int64_t lun)
223 struct ncr53c9x_linfo *li;
225 LIST_FOREACH(li, &ti->luns, link)
232 * Attach this instance, and then all the sub-devices.
235 ncr53c9x_attach(struct ncr53c9x_softc *sc)
237 struct cam_devq *devq;
239 struct cam_path *path;
240 struct ncr53c9x_ecb *ecb;
243 if (NCR_LOCK_INITIALIZED(sc) == 0) {
244 device_printf(sc->sc_dev, "mutex not initialized\n");
248 callout_init_mtx(&sc->sc_watchdog, &sc->sc_lock, 0);
251 * Note, the front-end has set us up to print the chip variation.
253 if (sc->sc_rev >= NCR_VARIANT_MAX) {
254 device_printf(sc->sc_dev, "unknown variant %d, devices not "
255 "attached\n", sc->sc_rev);
259 device_printf(sc->sc_dev, "%s, %d MHz, SCSI ID %d\n",
260 ncr53c9x_variant_names[sc->sc_rev], sc->sc_freq, sc->sc_id);
262 sc->sc_ntarg = (sc->sc_rev == NCR_VARIANT_FAS366) ? 16 : 8;
265 * Allocate SCSI message buffers.
266 * Front-ends can override allocation to avoid alignment
267 * handling in the DMA engines. Note that ncr53c9x_msgout()
268 * can request a 1 byte DMA transfer.
270 if (sc->sc_omess == NULL) {
271 sc->sc_omess_self = 1;
272 sc->sc_omess = malloc(NCR_MAX_MSG_LEN, M_DEVBUF, M_NOWAIT);
273 if (sc->sc_omess == NULL) {
274 device_printf(sc->sc_dev,
275 "cannot allocate MSGOUT buffer\n");
279 sc->sc_omess_self = 0;
281 if (sc->sc_imess == NULL) {
282 sc->sc_imess_self = 1;
283 sc->sc_imess = malloc(NCR_MAX_MSG_LEN + 1, M_DEVBUF, M_NOWAIT);
284 if (sc->sc_imess == NULL) {
285 device_printf(sc->sc_dev,
286 "cannot allocate MSGIN buffer\n");
291 sc->sc_imess_self = 0;
293 sc->sc_tinfo = malloc(sc->sc_ntarg * sizeof(sc->sc_tinfo[0]),
294 M_DEVBUF, M_NOWAIT | M_ZERO);
295 if (sc->sc_tinfo == NULL) {
296 device_printf(sc->sc_dev,
297 "cannot allocate target info buffer\n");
303 * Treat NCR53C90 with the 86C01 DMA chip exactly as ESP100
306 if (sc->sc_rev == NCR_VARIANT_NCR53C90_86C01)
307 sc->sc_rev = NCR_VARIANT_ESP100;
309 sc->sc_ccf = FREQTOCCF(sc->sc_freq);
311 /* The value *must not* be == 1. Make it 2. */
316 * The recommended timeout is 250ms. This register is loaded
317 * with a value calculated as follows, from the docs:
319 * (timeout period) x (CLK frequency)
320 * reg = -------------------------------------
321 * 8192 x (Clock Conversion Factor)
323 * Since CCF has a linear relation to CLK, this generally computes
324 * to the constant of 153.
326 sc->sc_timeout = ((250 * 1000) * sc->sc_freq) / (8192 * sc->sc_ccf);
328 /* The CCF register only has 3 bits; 0 is actually 8. */
334 devq = cam_simq_alloc(sc->sc_ntarg);
336 device_printf(sc->sc_dev, "cannot allocate device queue\n");
341 sim = cam_sim_alloc(ncr53c9x_action, ncr53c9x_poll, "esp", sc,
342 device_get_unit(sc->sc_dev), &sc->sc_lock, 1, NCR_TAG_DEPTH, devq);
344 device_printf(sc->sc_dev, "cannot allocate SIM entry\n");
351 if (xpt_bus_register(sim, sc->sc_dev, 0) != CAM_SUCCESS) {
352 device_printf(sc->sc_dev, "cannot register bus\n");
357 if (xpt_create_path(&path, NULL, cam_sim_path(sim),
358 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
359 device_printf(sc->sc_dev, "cannot create path\n");
364 if (xpt_register_async(AC_LOST_DEVICE, ncr53c9x_async, sim, path) !=
366 device_printf(sc->sc_dev, "cannot register async handler\n");
374 /* Reset state and bus. */
376 sc->sc_cfflags = sc->sc_dev.dv_cfdata->cf_flags;
381 ncr53c9x_init(sc, 1);
383 TAILQ_INIT(&sc->free_list);
385 malloc(sizeof(struct ncr53c9x_ecb) * NCR_TAG_DEPTH, M_DEVBUF,
386 M_NOWAIT | M_ZERO)) == NULL) {
387 device_printf(sc->sc_dev, "cannot allocate ECB array\n");
391 for (i = 0; i < NCR_TAG_DEPTH; i++) {
392 ecb = &sc->ecb_array[i];
395 callout_init_mtx(&ecb->ch, &sc->sc_lock, 0);
396 TAILQ_INSERT_HEAD(&sc->free_list, ecb, free_links);
399 callout_reset(&sc->sc_watchdog, 60 * hz, ncr53c9x_watch, sc);
406 xpt_register_async(0, ncr53c9x_async, sim, path);
410 xpt_bus_deregister(cam_sim_path(sim));
413 cam_sim_free(sim, TRUE);
417 free(sc->sc_tinfo, M_DEVBUF);
419 if (sc->sc_imess_self)
420 free(sc->sc_imess, M_DEVBUF);
422 if (sc->sc_omess_self)
423 free(sc->sc_omess, M_DEVBUF);
428 ncr53c9x_detach(struct ncr53c9x_softc *sc)
430 struct ncr53c9x_linfo *li, *nextli;
433 callout_drain(&sc->sc_watchdog);
438 /* Cancel all commands. */
439 ncr53c9x_clear(sc, CAM_REQ_ABORTED);
441 /* Free logical units. */
442 for (t = 0; t < sc->sc_ntarg; t++) {
443 for (li = LIST_FIRST(&sc->sc_tinfo[t].luns); li;
445 nextli = LIST_NEXT(li, link);
451 xpt_register_async(0, ncr53c9x_async, sc->sc_sim, sc->sc_path);
452 xpt_free_path(sc->sc_path);
453 xpt_bus_deregister(cam_sim_path(sc->sc_sim));
454 cam_sim_free(sc->sc_sim, TRUE);
458 free(sc->ecb_array, M_DEVBUF);
459 free(sc->sc_tinfo, M_DEVBUF);
460 if (sc->sc_imess_self)
461 free(sc->sc_imess, M_DEVBUF);
462 if (sc->sc_omess_self)
463 free(sc->sc_omess, M_DEVBUF);
469 * This is the generic ncr53c9x reset function. It does not reset the SCSI
470 * bus, only this controller, but kills any on-going commands, and also stops
471 * and resets the DMA.
473 * After reset, registers are loaded with the defaults from the attach
477 ncr53c9x_reset(struct ncr53c9x_softc *sc)
480 NCR_LOCK_ASSERT(sc, MA_OWNED);
482 /* Reset DMA first. */
485 /* Reset SCSI chip. */
486 NCRCMD(sc, NCRCMD_RSTCHIP);
487 NCRCMD(sc, NCRCMD_NOP);
490 /* Do these backwards, and fall through. */
491 switch (sc->sc_rev) {
492 case NCR_VARIANT_ESP406:
493 case NCR_VARIANT_FAS408:
494 NCR_WRITE_REG(sc, NCR_CFG5, sc->sc_cfg5 | NCRCFG5_SINT);
495 NCR_WRITE_REG(sc, NCR_CFG4, sc->sc_cfg4);
497 case NCR_VARIANT_AM53C974:
498 case NCR_VARIANT_FAS100A:
499 case NCR_VARIANT_FAS216:
500 case NCR_VARIANT_FAS236:
501 case NCR_VARIANT_NCR53C94:
502 case NCR_VARIANT_NCR53C96:
503 case NCR_VARIANT_ESP200:
504 sc->sc_features |= NCR_F_HASCFG3;
505 NCR_WRITE_REG(sc, NCR_CFG3, sc->sc_cfg3);
507 case NCR_VARIANT_ESP100A:
508 sc->sc_features |= NCR_F_SELATN3;
509 if ((sc->sc_cfg2 & NCRCFG2_FE) != 0)
510 sc->sc_features |= NCR_F_LARGEXFER;
511 NCR_WRITE_REG(sc, NCR_CFG2, sc->sc_cfg2);
513 case NCR_VARIANT_ESP100:
514 NCR_WRITE_REG(sc, NCR_CFG1, sc->sc_cfg1);
515 NCR_WRITE_REG(sc, NCR_CCF, sc->sc_ccf);
516 NCR_WRITE_REG(sc, NCR_SYNCOFF, 0);
517 NCR_WRITE_REG(sc, NCR_TIMEOUT, sc->sc_timeout);
520 case NCR_VARIANT_FAS366:
521 sc->sc_features |= NCR_F_HASCFG3 | NCR_F_FASTSCSI |
522 NCR_F_SELATN3 | NCR_F_LARGEXFER;
523 sc->sc_cfg3 = NCRFASCFG3_FASTCLK | NCRFASCFG3_OBAUTO;
525 sc->sc_cfg3 |= NCRFASCFG3_IDBIT3;
526 sc->sc_cfg3_fscsi = NCRFASCFG3_FASTSCSI;
527 NCR_WRITE_REG(sc, NCR_CFG3, sc->sc_cfg3);
528 sc->sc_cfg2 = NCRCFG2_HMEFE | NCRCFG2_HME32;
529 NCR_WRITE_REG(sc, NCR_CFG2, sc->sc_cfg2);
530 NCR_WRITE_REG(sc, NCR_CFG1, sc->sc_cfg1);
531 NCR_WRITE_REG(sc, NCR_CCF, sc->sc_ccf);
532 NCR_WRITE_REG(sc, NCR_SYNCOFF, 0);
533 NCR_WRITE_REG(sc, NCR_TIMEOUT, sc->sc_timeout);
537 device_printf(sc->sc_dev,
538 "unknown revision code, assuming ESP100\n");
539 NCR_WRITE_REG(sc, NCR_CFG1, sc->sc_cfg1);
540 NCR_WRITE_REG(sc, NCR_CCF, sc->sc_ccf);
541 NCR_WRITE_REG(sc, NCR_SYNCOFF, 0);
542 NCR_WRITE_REG(sc, NCR_TIMEOUT, sc->sc_timeout);
545 if (sc->sc_rev == NCR_VARIANT_AM53C974)
546 NCR_WRITE_REG(sc, NCR_AMDCFG4, sc->sc_cfg4);
549 device_printf(sc->sc_dev, "%s: revision %d\n", __func__, sc->sc_rev);
550 device_printf(sc->sc_dev, "%s: cfg1 0x%x, cfg2 0x%x, cfg3 0x%x, ccf "
551 "0x%x, timeout 0x%x\n", __func__, sc->sc_cfg1, sc->sc_cfg2,
552 sc->sc_cfg3, sc->sc_ccf, sc->sc_timeout);
557 * Clear all commands.
560 ncr53c9x_clear(struct ncr53c9x_softc *sc, cam_status result)
562 struct ncr53c9x_ecb *ecb;
565 NCR_LOCK_ASSERT(sc, MA_OWNED);
567 /* Cancel any active commands. */
568 sc->sc_state = NCR_CLEANING;
572 ecb->ccb->ccb_h.status = result;
573 ncr53c9x_done(sc, ecb);
575 /* Cancel outstanding disconnected commands. */
576 for (r = 0; r < sc->sc_ntarg; r++)
577 ncr53c9x_clear_target(sc, r, result);
581 * Clear all commands for a specific target.
584 ncr53c9x_clear_target(struct ncr53c9x_softc *sc, int target,
587 struct ncr53c9x_ecb *ecb;
588 struct ncr53c9x_linfo *li;
591 NCR_LOCK_ASSERT(sc, MA_OWNED);
593 /* Cancel outstanding disconnected commands on each LUN. */
594 LIST_FOREACH(li, &sc->sc_tinfo[target].luns, link) {
599 * XXX should we terminate a command
600 * that never reached the disk?
603 ecb->ccb->ccb_h.status = result;
604 ncr53c9x_done(sc, ecb);
606 for (i = 0; i < NCR_TAG_DEPTH; i++) {
609 li->queued[i] = NULL;
610 ecb->ccb->ccb_h.status = result;
611 ncr53c9x_done(sc, ecb);
619 * Initialize ncr53c9x state machine.
622 ncr53c9x_init(struct ncr53c9x_softc *sc, int doreset)
624 struct ncr53c9x_tinfo *ti;
627 NCR_LOCK_ASSERT(sc, MA_OWNED);
629 NCR_MISC(("[NCR_INIT(%d) %d] ", doreset, sc->sc_state));
631 if (sc->sc_state == 0) {
632 /* First time through; initialize. */
634 TAILQ_INIT(&sc->ready_list);
636 memset(sc->sc_tinfo, 0, sizeof(*sc->sc_tinfo));
637 for (r = 0; r < sc->sc_ntarg; r++) {
638 LIST_INIT(&sc->sc_tinfo[r].luns);
641 ncr53c9x_clear(sc, CAM_CMD_TIMEOUT);
644 * Reset the chip to a known state.
649 sc->sc_msgpriq = sc->sc_msgout = sc->sc_msgoutq = 0;
650 sc->sc_phase = sc->sc_prevphase = INVALID_PHASE;
653 * If we're the first time through, set the default parameters
654 * for all targets. Otherwise we only clear their current transfer
655 * settings so we'll renegotiate their goal settings with the next
658 if (sc->sc_state == 0) {
659 for (r = 0; r < sc->sc_ntarg; r++) {
660 ti = &sc->sc_tinfo[r];
661 /* XXX - config flags per target: low bits: no reselect; high bits: no synch */
663 ti->flags = ((sc->sc_minsync != 0 &&
664 (sc->sc_cfflags & (1 << ((r & 7) + 8))) == 0) ?
666 ((sc->sc_cfflags & (1 << (r & 7))) == 0 ?
668 ti->curr.period = ti->goal.period = 0;
669 ti->curr.offset = ti->goal.offset = 0;
670 ti->curr.width = ti->goal.width =
671 MSG_EXT_WDTR_BUS_8_BIT;
674 for (r = 0; r < sc->sc_ntarg; r++) {
675 ti = &sc->sc_tinfo[r];
676 ti->flags &= ~(T_SDTRSENT | T_WDTRSENT);
679 ti->curr.width = MSG_EXT_WDTR_BUS_8_BIT;
684 sc->sc_state = NCR_SBR;
685 NCRCMD(sc, NCRCMD_RSTSCSI);
686 /* Give the bus a fighting chance to settle. */
689 sc->sc_state = NCR_IDLE;
695 * Read the NCR registers, and save their contents for later use.
696 * NCR_STAT, NCR_STEP & NCR_INTR are mostly zeroed out when reading
697 * NCR_INTR - so make sure it is the last read.
699 * I think that (from reading the docs) most bits in these registers
700 * only make sense when the DMA CSR has an interrupt showing. Call only
701 * if an interrupt is pending.
704 ncr53c9x_readregs(struct ncr53c9x_softc *sc)
707 NCR_LOCK_ASSERT(sc, MA_OWNED);
709 sc->sc_espstat = NCR_READ_REG(sc, NCR_STAT);
710 /* Only the step bits are of interest. */
711 sc->sc_espstep = NCR_READ_REG(sc, NCR_STEP) & NCRSTEP_MASK;
713 if (sc->sc_rev == NCR_VARIANT_FAS366)
714 sc->sc_espstat2 = NCR_READ_REG(sc, NCR_STAT2);
716 sc->sc_espintr = NCR_READ_REG(sc, NCR_INTR);
719 * Determine the SCSI bus phase, return either a real SCSI bus phase
720 * or some pseudo phase we use to detect certain exceptions.
722 sc->sc_phase = (sc->sc_espintr & NCRINTR_DIS) ?
723 BUSFREE_PHASE : sc->sc_espstat & NCRSTAT_PHASE;
725 NCR_INTS(("regs[intr=%02x,stat=%02x,step=%02x,stat2=%02x] ",
726 sc->sc_espintr, sc->sc_espstat, sc->sc_espstep, sc->sc_espstat2));
730 * Convert Synchronous Transfer Period to chip register Clock Per Byte value.
733 ncr53c9x_stp2cpb(struct ncr53c9x_softc *sc, int period)
737 NCR_LOCK_ASSERT(sc, MA_OWNED);
739 v = (sc->sc_freq * period) / 250;
740 if (ncr53c9x_cpb2stp(sc, v) < period)
741 /* Correct round-down error. */
747 ncr53c9x_setsync(struct ncr53c9x_softc *sc, struct ncr53c9x_tinfo *ti)
749 uint8_t cfg3, syncoff, synctp;
751 NCR_LOCK_ASSERT(sc, MA_OWNED);
754 if (ti->curr.offset != 0) {
755 syncoff = ti->curr.offset;
756 synctp = ncr53c9x_stp2cpb(sc, ti->curr.period);
757 if (sc->sc_features & NCR_F_FASTSCSI) {
759 * If the period is 200ns or less (ti->period <= 50),
760 * put the chip in Fast SCSI mode.
762 if (ti->curr.period <= 50)
764 * There are (at least) 4 variations of the
765 * configuration 3 register. The drive attach
766 * routine sets the appropriate bit to put the
767 * chip into Fast SCSI mode so that it doesn't
768 * have to be figured out here each time.
770 cfg3 |= sc->sc_cfg3_fscsi;
774 * Am53c974 requires different SYNCTP values when the
777 if (sc->sc_rev == NCR_VARIANT_AM53C974 &&
778 (cfg3 & NCRAMDCFG3_FSCSI) == 0)
785 if (ti->curr.width != MSG_EXT_WDTR_BUS_8_BIT) {
786 if (sc->sc_rev == NCR_VARIANT_FAS366)
787 cfg3 |= NCRFASCFG3_EWIDE;
790 if (sc->sc_features & NCR_F_HASCFG3)
791 NCR_WRITE_REG(sc, NCR_CFG3, cfg3);
793 NCR_WRITE_REG(sc, NCR_SYNCOFF, syncoff);
794 NCR_WRITE_REG(sc, NCR_SYNCTP, synctp);
798 * Send a command to a target, set the driver state to NCR_SELECTING
799 * and let the caller take care of the rest.
801 * Keeping this as a function allows me to say that this may be done
802 * by DMA instead of programmed I/O soon.
805 ncr53c9x_select(struct ncr53c9x_softc *sc, struct ncr53c9x_ecb *ecb)
807 struct ncr53c9x_tinfo *ti;
810 int clen, error, selatn3, selatns;
811 int lun = ecb->ccb->ccb_h.target_lun;
812 int target = ecb->ccb->ccb_h.target_id;
814 NCR_LOCK_ASSERT(sc, MA_OWNED);
816 NCR_TRACE(("[%s(t%d,l%d,cmd:%x,tag:%x,%x)] ", __func__, target, lun,
817 ecb->cmd.cmd.opcode, ecb->tag[0], ecb->tag[1]));
819 ti = &sc->sc_tinfo[target];
820 sc->sc_state = NCR_SELECTING;
822 * Schedule the callout now, the first time we will go away
823 * expecting to come back due to an interrupt, because it is
824 * always possible that the interrupt may never happen.
826 callout_reset(&ecb->ch, mstohz(ecb->timeout), ncr53c9x_callout, ecb);
829 * The docs say the target register is never reset, and I
830 * can't think of a better place to set it.
832 if (sc->sc_rev == NCR_VARIANT_FAS366) {
833 NCRCMD(sc, NCRCMD_FLUSH);
834 NCR_WRITE_REG(sc, NCR_SELID, target | NCR_BUSID_HMEXC32 |
837 NCR_WRITE_REG(sc, NCR_SELID, target);
840 * If we are requesting sense, force a renegotiation if we are
841 * currently using anything different from asynchronous at 8 bit
842 * as the target might have lost our transfer negotiations.
844 if ((ecb->flags & ECB_SENSE) != 0 && (ti->curr.offset != 0 ||
845 ti->curr.width != MSG_EXT_WDTR_BUS_8_BIT)) {
848 ti->curr.width = MSG_EXT_WDTR_BUS_8_BIT;
850 ncr53c9x_setsync(sc, ti);
852 selatn3 = selatns = 0;
853 if (ecb->tag[0] != 0) {
854 if (sc->sc_features & NCR_F_SELATN3)
855 /* Use SELATN3 to send tag messages. */
858 /* We don't have SELATN3; use SELATNS to send tags. */
862 if (ti->curr.period != ti->goal.period ||
863 ti->curr.offset != ti->goal.offset ||
864 ti->curr.width != ti->goal.width) {
865 /* We have to use SELATNS to send sync/wide messages. */
870 cmd = (uint8_t *)&ecb->cmd.cmd;
873 /* We'll use tags with SELATN3. */
874 clen = ecb->clen + 3;
876 cmd[0] = MSG_IDENTIFY(lun, 1); /* msg[0] */
877 cmd[1] = ecb->tag[0]; /* msg[1] */
878 cmd[2] = ecb->tag[1]; /* msg[2] */
880 /* We don't have tags, or will send messages with SELATNS. */
881 clen = ecb->clen + 1;
883 cmd[0] = MSG_IDENTIFY(lun, (ti->flags & T_RSELECTOFF) == 0);
886 if ((sc->sc_features & NCR_F_DMASELECT) && !selatns) {
887 /* Setup DMA transfer for command. */
889 sc->sc_cmdlen = clen;
891 error = NCRDMA_SETUP(sc, &sc->sc_cmdp, &sc->sc_cmdlen, 0,
896 /* Program the SCSI counter. */
897 NCR_SET_COUNT(sc, dmasize);
899 /* Load the count in. */
900 NCRCMD(sc, NCRCMD_NOP | NCRCMD_DMA);
902 /* And get the target's attention. */
904 sc->sc_msgout = SEND_TAG;
905 sc->sc_flags |= NCR_ATN;
906 NCRCMD(sc, NCRCMD_SELATN3 | NCRCMD_DMA);
908 NCRCMD(sc, NCRCMD_SELATN | NCRCMD_DMA);
915 * Who am I? This is where we tell the target that we are
916 * happy for it to disconnect etc.
919 /* Now get the command into the FIFO. */
921 ncr53c9x_wrfifo(sc, cmd, clen);
923 /* And get the target's attention. */
925 NCR_MSGS(("SELATNS \n"));
926 /* Arbitrate, select and stop after IDENTIFY message. */
927 NCRCMD(sc, NCRCMD_SELATNS);
928 } else if (selatn3) {
929 sc->sc_msgout = SEND_TAG;
930 sc->sc_flags |= NCR_ATN;
931 NCRCMD(sc, NCRCMD_SELATN3);
933 NCRCMD(sc, NCRCMD_SELATN);
937 ncr53c9x_free_ecb(struct ncr53c9x_softc *sc, struct ncr53c9x_ecb *ecb)
940 NCR_LOCK_ASSERT(sc, MA_OWNED);
943 TAILQ_INSERT_TAIL(&sc->free_list, ecb, free_links);
946 static struct ncr53c9x_ecb *
947 ncr53c9x_get_ecb(struct ncr53c9x_softc *sc)
949 struct ncr53c9x_ecb *ecb;
951 NCR_LOCK_ASSERT(sc, MA_OWNED);
953 ecb = TAILQ_FIRST(&sc->free_list);
956 panic("%s: ecb flags not cleared", __func__);
957 TAILQ_REMOVE(&sc->free_list, ecb, free_links);
958 ecb->flags = ECB_ALLOC;
959 bzero(&ecb->ccb, sizeof(struct ncr53c9x_ecb) -
960 offsetof(struct ncr53c9x_ecb, ccb));
966 * DRIVER FUNCTIONS CALLABLE FROM HIGHER LEVEL DRIVERS:
970 * Start a SCSI-command.
971 * This function is called by the higher level SCSI-driver to queue/run
976 ncr53c9x_action(struct cam_sim *sim, union ccb *ccb)
978 struct ccb_pathinq *cpi;
979 struct ccb_scsiio *csio;
980 struct ccb_trans_settings *cts;
981 struct ccb_trans_settings_scsi *scsi;
982 struct ccb_trans_settings_spi *spi;
983 struct ncr53c9x_ecb *ecb;
984 struct ncr53c9x_softc *sc;
985 struct ncr53c9x_tinfo *ti;
988 sc = cam_sim_softc(sim);
990 NCR_LOCK_ASSERT(sc, MA_OWNED);
992 NCR_TRACE(("[%s %d]", __func__, ccb->ccb_h.func_code));
994 switch (ccb->ccb_h.func_code) {
996 ncr53c9x_init(sc, 1);
997 ccb->ccb_h.status = CAM_REQ_CMP;
1000 case XPT_CALC_GEOMETRY:
1001 cam_calc_geometry(&ccb->ccg, sc->sc_extended_geom);
1006 cpi->version_num = 1;
1007 cpi->hba_inquiry = PI_SDTR_ABLE | PI_TAG_ABLE;
1009 (sc->sc_rev == NCR_VARIANT_FAS366) ? PI_WIDE_16 : 0;
1010 cpi->target_sprt = 0;
1012 cpi->hba_eng_cnt = 0;
1013 cpi->max_target = sc->sc_ntarg - 1;
1015 cpi->initiator_id = sc->sc_id;
1016 strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
1017 strncpy(cpi->hba_vid, "NCR", HBA_IDLEN);
1018 strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
1019 cpi->unit_number = cam_sim_unit(sim);
1021 cpi->base_transfer_speed = 3300;
1022 cpi->protocol = PROTO_SCSI;
1023 cpi->protocol_version = SCSI_REV_2;
1024 cpi->transport = XPORT_SPI;
1025 cpi->transport_version = 2;
1026 cpi->maxio = sc->sc_maxxfer;
1027 ccb->ccb_h.status = CAM_REQ_CMP;
1030 case XPT_GET_TRAN_SETTINGS:
1032 ti = &sc->sc_tinfo[ccb->ccb_h.target_id];
1033 scsi = &cts->proto_specific.scsi;
1034 spi = &cts->xport_specific.spi;
1036 cts->protocol = PROTO_SCSI;
1037 cts->protocol_version = SCSI_REV_2;
1038 cts->transport = XPORT_SPI;
1039 cts->transport_version = 2;
1041 if (cts->type == CTS_TYPE_CURRENT_SETTINGS) {
1042 spi->sync_period = ti->curr.period;
1043 spi->sync_offset = ti->curr.offset;
1044 spi->bus_width = ti->curr.width;
1045 if ((ti->flags & T_TAG) != 0) {
1046 spi->flags |= CTS_SPI_FLAGS_DISC_ENB;
1047 scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB;
1049 spi->flags &= ~CTS_SPI_FLAGS_DISC_ENB;
1050 scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB;
1053 if ((ti->flags & T_SYNCHOFF) != 0) {
1054 spi->sync_period = 0;
1055 spi->sync_offset = 0;
1057 spi->sync_period = sc->sc_minsync;
1058 spi->sync_offset = sc->sc_maxoffset;
1060 spi->bus_width = sc->sc_maxwidth;
1061 spi->flags |= CTS_SPI_FLAGS_DISC_ENB;
1062 scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB;
1065 CTS_SPI_VALID_BUS_WIDTH |
1066 CTS_SPI_VALID_SYNC_RATE |
1067 CTS_SPI_VALID_SYNC_OFFSET |
1069 scsi->valid = CTS_SCSI_VALID_TQ;
1070 ccb->ccb_h.status = CAM_REQ_CMP;
1074 device_printf(sc->sc_dev, "XPT_ABORT called\n");
1075 ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
1079 device_printf(sc->sc_dev, "XPT_TERM_IO called\n");
1080 ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
1085 if (ccb->ccb_h.target_id < 0 ||
1086 ccb->ccb_h.target_id >= sc->sc_ntarg) {
1087 ccb->ccb_h.status = CAM_PATH_INVALID;
1090 /* Get an ECB to use. */
1091 ecb = ncr53c9x_get_ecb(sc);
1093 * This should never happen as we track resources
1097 xpt_freeze_simq(sim, 1);
1098 ccb->ccb_h.status = CAM_REQUEUE_REQ;
1099 device_printf(sc->sc_dev, "unable to allocate ecb\n");
1103 /* Initialize ecb. */
1105 ecb->timeout = ccb->ccb_h.timeout;
1107 if (ccb->ccb_h.func_code == XPT_RESET_DEV) {
1108 ecb->flags |= ECB_RESET;
1113 if ((ccb->ccb_h.flags & CAM_CDB_POINTER) != 0)
1114 bcopy(csio->cdb_io.cdb_ptr, &ecb->cmd.cmd,
1117 bcopy(csio->cdb_io.cdb_bytes, &ecb->cmd.cmd,
1119 ecb->clen = csio->cdb_len;
1120 ecb->daddr = csio->data_ptr;
1121 ecb->dleft = csio->dxfer_len;
1125 TAILQ_INSERT_TAIL(&sc->ready_list, ecb, chain);
1126 ecb->flags |= ECB_READY;
1127 if (sc->sc_state == NCR_IDLE)
1131 case XPT_SET_TRAN_SETTINGS:
1133 target = ccb->ccb_h.target_id;
1134 ti = &sc->sc_tinfo[target];
1135 scsi = &cts->proto_specific.scsi;
1136 spi = &cts->xport_specific.spi;
1138 if ((scsi->valid & CTS_SCSI_VALID_TQ) != 0) {
1139 if ((sc->sc_cfflags & (1<<((target & 7) + 16))) == 0 &&
1140 (scsi->flags & CTS_SCSI_FLAGS_TAG_ENB)) {
1141 NCR_MISC(("%s: target %d: tagged queuing\n",
1142 device_get_nameunit(sc->sc_dev), target));
1145 ti->flags &= ~T_TAG;
1148 if ((spi->valid & CTS_SPI_VALID_BUS_WIDTH) != 0) {
1149 NCR_MISC(("%s: target %d: wide negotiation\n",
1150 device_get_nameunit(sc->sc_dev), target));
1151 ti->goal.width = spi->bus_width;
1154 if ((spi->valid & CTS_SPI_VALID_SYNC_RATE) != 0) {
1155 NCR_MISC(("%s: target %d: sync period negotiation\n",
1156 device_get_nameunit(sc->sc_dev), target));
1157 ti->goal.period = spi->sync_period;
1160 if ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) != 0) {
1161 NCR_MISC(("%s: target %d: sync offset negotiation\n",
1162 device_get_nameunit(sc->sc_dev), target));
1163 ti->goal.offset = spi->sync_offset;
1166 ccb->ccb_h.status = CAM_REQ_CMP;
1170 device_printf(sc->sc_dev, "Unhandled function code %d\n",
1171 ccb->ccb_h.func_code);
1172 ccb->ccb_h.status = CAM_PROVIDE_FAIL;
1180 * Used when interrupt driven I/O is not allowed, e.g. during boot.
1183 ncr53c9x_poll(struct cam_sim *sim)
1185 struct ncr53c9x_softc *sc;
1187 sc = cam_sim_softc(sim);
1189 NCR_LOCK_ASSERT(sc, MA_OWNED);
1191 NCR_TRACE(("[%s] ", __func__));
1193 if (NCRDMA_ISINTR(sc))
1198 * Asynchronous notification handler
1201 ncr53c9x_async(void *cbarg, uint32_t code, struct cam_path *path, void *arg)
1203 struct ncr53c9x_softc *sc;
1204 struct ncr53c9x_tinfo *ti;
1207 sc = cam_sim_softc(cbarg);
1209 NCR_LOCK_ASSERT(sc, MA_OWNED);
1212 case AC_LOST_DEVICE:
1213 target = xpt_path_target_id(path);
1214 if (target < 0 || target >= sc->sc_ntarg)
1217 /* Cancel outstanding disconnected commands. */
1218 ncr53c9x_clear_target(sc, target, CAM_REQ_ABORTED);
1220 /* Set the default parameters for the target. */
1221 ti = &sc->sc_tinfo[target];
1222 /* XXX - config flags per target: low bits: no reselect; high bits: no synch */
1223 ti->flags = ((sc->sc_minsync != 0 &&
1224 (sc->sc_cfflags & (1 << ((target & 7) + 8))) == 0) ?
1226 ((sc->sc_cfflags & (1 << (target & 7))) == 0 ?
1228 ti->curr.period = ti->goal.period = 0;
1229 ti->curr.offset = ti->goal.offset = 0;
1230 ti->curr.width = ti->goal.width = MSG_EXT_WDTR_BUS_8_BIT;
1236 * LOW LEVEL SCSI UTILITIES
1240 * Schedule a SCSI operation. This has now been pulled out of the interrupt
1241 * handler so that we may call it from ncr53c9x_action and ncr53c9x_done.
1242 * This may save us an unnecessary interrupt just to get things going.
1243 * Should only be called when state == NCR_IDLE and with sc_lock held.
1246 ncr53c9x_sched(struct ncr53c9x_softc *sc)
1248 struct ncr53c9x_ecb *ecb;
1249 struct ncr53c9x_linfo *li;
1250 struct ncr53c9x_tinfo *ti;
1253 NCR_LOCK_ASSERT(sc, MA_OWNED);
1255 NCR_TRACE(("[%s] ", __func__));
1257 if (sc->sc_state != NCR_IDLE)
1258 panic("%s: not IDLE (state=%d)", __func__, sc->sc_state);
1261 * Find first ecb in ready queue that is for a target/lunit
1262 * combinations that is not busy.
1264 TAILQ_FOREACH(ecb, &sc->ready_list, chain) {
1265 ti = &sc->sc_tinfo[ecb->ccb->ccb_h.target_id];
1266 lun = ecb->ccb->ccb_h.target_lun;
1268 /* Select type of tag for this command */
1269 if ((ti->flags & (T_RSELECTOFF | T_TAG)) != T_TAG)
1271 else if ((ecb->flags & ECB_SENSE) != 0)
1273 else if ((ecb->ccb->ccb_h.flags & CAM_TAG_ACTION_VALID) == 0)
1275 else if (ecb->ccb->csio.tag_action == CAM_TAG_ACTION_NONE)
1278 tag = ecb->ccb->csio.tag_action;
1280 li = TINFO_LUN(ti, lun);
1282 /* Initialize LUN info and add to list. */
1283 li = malloc(sizeof(*li), M_DEVBUF, M_NOWAIT | M_ZERO);
1288 LIST_INSERT_HEAD(&ti->luns, li, link);
1292 li->last_used = time_second;
1294 /* Try to issue this as an untagged command. */
1295 if (li->untagged == NULL)
1298 if (li->untagged != NULL) {
1300 if ((li->busy != 1) && li->used == 0) {
1302 * We need to issue this untagged command
1307 /* not ready, yet */
1313 li->queued[ecb->tag_id] = ecb;
1314 ecb->tag[1] = ecb->tag_id;
1317 if (li->untagged != NULL && (li->busy != 1)) {
1319 TAILQ_REMOVE(&sc->ready_list, ecb, chain);
1320 ecb->flags &= ~ECB_READY;
1322 ncr53c9x_select(sc, ecb);
1325 if (li->untagged == NULL && tag != 0) {
1326 TAILQ_REMOVE(&sc->ready_list, ecb, chain);
1327 ecb->flags &= ~ECB_READY;
1329 ncr53c9x_select(sc, ecb);
1332 NCR_TRACE(("[%s %d:%d busy] \n", __func__,
1333 ecb->ccb->ccb_h.target_id,
1334 ecb->ccb->ccb_h.target_lun));
1339 ncr53c9x_sense(struct ncr53c9x_softc *sc, struct ncr53c9x_ecb *ecb)
1341 union ccb *ccb = ecb->ccb;
1342 struct ncr53c9x_linfo *li;
1343 struct ncr53c9x_tinfo *ti;
1344 struct scsi_request_sense *ss = (void *)&ecb->cmd.cmd;
1347 NCR_LOCK_ASSERT(sc, MA_OWNED);
1349 NCR_TRACE(("[%s] ", __func__));
1351 lun = ccb->ccb_h.target_lun;
1352 ti = &sc->sc_tinfo[ccb->ccb_h.target_id];
1354 /* Next, setup a REQUEST SENSE command block. */
1355 memset(ss, 0, sizeof(*ss));
1356 ss->opcode = REQUEST_SENSE;
1357 ss->byte2 = ccb->ccb_h.target_lun << SCSI_CMD_LUN_SHIFT;
1358 ss->length = sizeof(struct scsi_sense_data);
1359 ecb->clen = sizeof(*ss);
1360 memset(&ccb->csio.sense_data, 0, sizeof(ccb->csio.sense_data));
1361 ecb->daddr = (uint8_t *)&ccb->csio.sense_data;
1362 ecb->dleft = sizeof(struct scsi_sense_data);
1363 ecb->flags |= ECB_SENSE;
1364 ecb->timeout = NCR_SENSE_TIMEOUT;
1366 li = TINFO_LUN(ti, lun);
1369 ncr53c9x_dequeue(sc, ecb);
1370 li->untagged = ecb; /* Must be executed first to fix C/A. */
1372 if (ecb == sc->sc_nexus)
1373 ncr53c9x_select(sc, ecb);
1375 TAILQ_INSERT_HEAD(&sc->ready_list, ecb, chain);
1376 ecb->flags |= ECB_READY;
1377 if (sc->sc_state == NCR_IDLE)
1383 * POST PROCESSING OF SCSI_CMD (usually current)
1386 ncr53c9x_done(struct ncr53c9x_softc *sc, struct ncr53c9x_ecb *ecb)
1388 union ccb *ccb = ecb->ccb;
1389 struct ncr53c9x_linfo *li;
1390 struct ncr53c9x_tinfo *ti;
1391 int lun, sense_returned;
1393 NCR_LOCK_ASSERT(sc, MA_OWNED);
1395 NCR_TRACE(("[%s(status:%x)] ", __func__, ccb->ccb_h.status));
1397 ti = &sc->sc_tinfo[ccb->ccb_h.target_id];
1398 lun = ccb->ccb_h.target_lun;
1399 li = TINFO_LUN(ti, lun);
1401 callout_stop(&ecb->ch);
1404 * Now, if we've come here with no error code, i.e. we've kept the
1405 * initial CAM_REQ_CMP, and the status code signals that we should
1406 * check sense, we'll need to set up a request sense cmd block and
1407 * push the command back into the ready queue *before* any other
1408 * commands for this target/lunit, else we lose the sense info.
1409 * We don't support chk sense conditions for the request sense cmd.
1411 if (ccb->ccb_h.status == CAM_REQ_CMP) {
1412 ccb->csio.scsi_status = ecb->stat;
1413 if ((ecb->flags & ECB_ABORT) != 0)
1414 ccb->ccb_h.status = CAM_CMD_TIMEOUT;
1415 else if ((ecb->flags & ECB_SENSE) != 0 &&
1416 (ecb->stat != SCSI_STATUS_CHECK_COND)) {
1417 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND;
1418 ccb->ccb_h.status = CAM_SCSI_STATUS_ERROR |
1420 sense_returned = sizeof(ccb->csio.sense_data) -
1422 if (sense_returned < ccb->csio.sense_len)
1423 ccb->csio.sense_resid = ccb->csio.sense_len -
1426 ccb->csio.sense_resid = 0;
1427 } else if (ecb->stat == SCSI_STATUS_CHECK_COND) {
1428 if ((ecb->flags & ECB_SENSE) != 0)
1429 ccb->ccb_h.status = CAM_AUTOSENSE_FAIL;
1431 /* First, save the return values. */
1432 ccb->csio.resid = ecb->dleft;
1433 if ((ccb->ccb_h.flags & CAM_DIS_AUTOSENSE) ==
1435 ncr53c9x_sense(sc, ecb);
1438 ccb->ccb_h.status = CAM_SCSI_STATUS_ERROR;
1441 ccb->csio.resid = ecb->dleft;
1442 if (ecb->stat == SCSI_STATUS_QUEUE_FULL)
1443 ccb->ccb_h.status = CAM_SCSI_STATUS_ERROR;
1444 else if (ecb->stat == SCSI_STATUS_BUSY)
1445 ccb->ccb_h.status = CAM_SCSI_BUSY;
1446 } else if ((ccb->ccb_h.status & CAM_DEV_QFRZN) == 0) {
1447 ccb->ccb_h.status |= CAM_DEV_QFRZN;
1448 xpt_freeze_devq(ccb->ccb_h.path, 1);
1451 #ifdef NCR53C9X_DEBUG
1452 if ((ncr53c9x_debug & NCR_SHOWTRAC) != 0) {
1453 if (ccb->csio.resid != 0)
1454 printf("resid=%d ", ccb->csio.resid);
1455 if ((ccb->ccb_h.status & CAM_AUTOSNS_VALID) != 0)
1456 printf("sense=0x%02x\n",
1457 ccb->csio.sense_data.error_code);
1459 printf("status SCSI=0x%x CAM=0x%x\n",
1460 ccb->csio.scsi_status, ccb->ccb_h.status);
1465 * Remove the ECB from whatever queue it's on.
1467 ncr53c9x_dequeue(sc, ecb);
1468 if (ecb == sc->sc_nexus) {
1469 sc->sc_nexus = NULL;
1470 if (sc->sc_state != NCR_CLEANING) {
1471 sc->sc_state = NCR_IDLE;
1476 if ((ccb->ccb_h.status & CAM_SEL_TIMEOUT) != 0) {
1477 /* Selection timeout -- discard this LUN if empty. */
1478 if (li->untagged == NULL && li->used == 0) {
1480 ti->lun[lun] = NULL;
1481 LIST_REMOVE(li, link);
1486 ncr53c9x_free_ecb(sc, ecb);
1492 ncr53c9x_dequeue(struct ncr53c9x_softc *sc, struct ncr53c9x_ecb *ecb)
1494 struct ncr53c9x_linfo *li;
1495 struct ncr53c9x_tinfo *ti;
1498 NCR_LOCK_ASSERT(sc, MA_OWNED);
1500 ti = &sc->sc_tinfo[ecb->ccb->ccb_h.target_id];
1501 lun = ecb->ccb->ccb_h.target_lun;
1502 li = TINFO_LUN(ti, lun);
1504 if (li == NULL || li->lun != lun)
1505 panic("%s: lun %llx for ecb %p does not exist", __func__,
1506 (long long)lun, ecb);
1508 if (li->untagged == ecb) {
1510 li->untagged = NULL;
1512 if (ecb->tag[0] && li->queued[ecb->tag[1]] != NULL) {
1514 if (li->queued[ecb->tag[1]] != NULL &&
1515 (li->queued[ecb->tag[1]] != ecb))
1516 panic("%s: slot %d for lun %llx has %p instead of ecb "
1517 "%p", __func__, ecb->tag[1], (long long)lun,
1518 li->queued[ecb->tag[1]], ecb);
1520 li->queued[ecb->tag[1]] = NULL;
1523 ecb->tag[0] = ecb->tag[1] = 0;
1525 if ((ecb->flags & ECB_READY) != 0) {
1526 ecb->flags &= ~ECB_READY;
1527 TAILQ_REMOVE(&sc->ready_list, ecb, chain);
1532 * INTERRUPT/PROTOCOL ENGINE
1536 * Schedule an outgoing message by prioritizing it, and asserting
1537 * attention on the bus. We can only do this when we are the initiator
1538 * else there will be an illegal command interrupt.
1540 #define ncr53c9x_sched_msgout(m) do { \
1541 NCR_MSGS(("ncr53c9x_sched_msgout %x %d", m, __LINE__)); \
1542 NCRCMD(sc, NCRCMD_SETATN); \
1543 sc->sc_flags |= NCR_ATN; \
1544 sc->sc_msgpriq |= (m); \
1545 } while (/* CONSTCOND */0)
1548 ncr53c9x_flushfifo(struct ncr53c9x_softc *sc)
1551 NCR_LOCK_ASSERT(sc, MA_OWNED);
1553 NCR_TRACE(("[%s] ", __func__));
1555 NCRCMD(sc, NCRCMD_FLUSH);
1557 if (sc->sc_phase == COMMAND_PHASE ||
1558 sc->sc_phase == MESSAGE_OUT_PHASE)
1563 ncr53c9x_rdfifo(struct ncr53c9x_softc *sc, int how)
1568 NCR_LOCK_ASSERT(sc, MA_OWNED);
1571 case NCR_RDFIFO_START:
1572 ibuf = sc->sc_imess;
1576 case NCR_RDFIFO_CONTINUE:
1577 ibuf = sc->sc_imess + sc->sc_imlen;
1581 panic("%s: bad flag", __func__);
1586 * XXX buffer (sc_imess) size for message
1589 n = NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF;
1591 if (sc->sc_rev == NCR_VARIANT_FAS366) {
1594 for (i = 0; i < n; i++)
1595 ibuf[i] = NCR_READ_REG(sc, NCR_FIFO);
1597 if (sc->sc_espstat2 & NCRFAS_STAT2_ISHUTTLE) {
1599 NCR_WRITE_REG(sc, NCR_FIFO, 0);
1600 ibuf[i++] = NCR_READ_REG(sc, NCR_FIFO);
1602 NCR_READ_REG(sc, NCR_FIFO);
1604 ncr53c9x_flushfifo(sc);
1607 for (i = 0; i < n; i++)
1608 ibuf[i] = NCR_READ_REG(sc, NCR_FIFO);
1613 #ifdef NCR53C9X_DEBUG
1614 NCR_TRACE(("\n[rdfifo %s (%d):",
1615 (how == NCR_RDFIFO_START) ? "start" : "cont", (int)sc->sc_imlen));
1616 if ((ncr53c9x_debug & NCR_SHOWTRAC) != 0) {
1617 for (i = 0; i < sc->sc_imlen; i++)
1618 printf(" %02x", sc->sc_imess[i]);
1623 return (sc->sc_imlen);
1627 ncr53c9x_wrfifo(struct ncr53c9x_softc *sc, uint8_t *p, int len)
1631 NCR_LOCK_ASSERT(sc, MA_OWNED);
1633 #ifdef NCR53C9X_DEBUG
1634 NCR_MSGS(("[wrfifo(%d):", len));
1635 if ((ncr53c9x_debug & NCR_SHOWMSGS) != 0) {
1636 for (i = 0; i < len; i++)
1637 printf(" %02x", p[i]);
1642 for (i = 0; i < len; i++) {
1643 NCR_WRITE_REG(sc, NCR_FIFO, p[i]);
1645 if (sc->sc_rev == NCR_VARIANT_FAS366)
1646 NCR_WRITE_REG(sc, NCR_FIFO, 0);
1651 ncr53c9x_reselect(struct ncr53c9x_softc *sc, int message, int tagtype,
1654 struct ncr53c9x_ecb *ecb = NULL;
1655 struct ncr53c9x_linfo *li;
1656 struct ncr53c9x_tinfo *ti;
1657 uint8_t lun, selid, target;
1659 NCR_LOCK_ASSERT(sc, MA_OWNED);
1661 if (sc->sc_rev == NCR_VARIANT_FAS366)
1662 target = sc->sc_selid;
1665 * The SCSI chip made a snapshot of the data bus
1666 * while the reselection was being negotiated.
1667 * This enables us to determine which target did
1670 selid = sc->sc_selid & ~(1 << sc->sc_id);
1671 if (selid & (selid - 1)) {
1672 device_printf(sc->sc_dev, "reselect with invalid "
1673 "selid %02x; sending DEVICE RESET\n", selid);
1677 target = ffs(selid) - 1;
1679 lun = message & 0x07;
1682 * Search wait queue for disconnected command.
1683 * The list should be short, so I haven't bothered with
1684 * any more sophisticated structures than a simple
1685 * singly linked list.
1687 ti = &sc->sc_tinfo[target];
1688 li = TINFO_LUN(ti, lun);
1691 * We can get as far as the LUN with the IDENTIFY
1692 * message. Check to see if we're running an
1693 * untagged command. Otherwise ack the IDENTIFY
1694 * and wait for a tag message.
1697 if (li->untagged != NULL && li->busy)
1699 else if (tagtype != MSG_SIMPLE_Q_TAG) {
1700 /* Wait for tag to come by. */
1701 sc->sc_state = NCR_IDENTIFIED;
1704 ecb = li->queued[tagid];
1707 device_printf(sc->sc_dev, "reselect from target %d lun %d "
1708 "tag %x:%x with no nexus; sending ABORT\n",
1709 target, lun, tagtype, tagid);
1713 /* Make this nexus active again. */
1714 sc->sc_state = NCR_CONNECTED;
1716 ncr53c9x_setsync(sc, ti);
1718 if (ecb->flags & ECB_RESET)
1719 ncr53c9x_sched_msgout(SEND_DEV_RESET);
1720 else if (ecb->flags & ECB_ABORT)
1721 ncr53c9x_sched_msgout(SEND_ABORT);
1723 /* Do an implicit RESTORE POINTERS. */
1724 sc->sc_dp = ecb->daddr;
1725 sc->sc_dleft = ecb->dleft;
1730 ncr53c9x_sched_msgout(SEND_DEV_RESET);
1734 ncr53c9x_sched_msgout(SEND_ABORT);
1738 /* From NetBSD; these should go into CAM at some point. */
1739 #define MSG_ISEXTENDED(m) ((m) == MSG_EXTENDED)
1740 #define MSG_IS1BYTE(m) \
1741 ((!MSG_ISEXTENDED(m) && (m) < 0x20) || MSG_ISIDENTIFY(m))
1742 #define MSG_IS2BYTE(m) (((m) & 0xf0) == 0x20)
1745 __verify_msg_format(uint8_t *p, int len)
1748 if (len == 1 && MSG_IS1BYTE(p[0]))
1750 if (len == 2 && MSG_IS2BYTE(p[0]))
1752 if (len >= 3 && MSG_ISEXTENDED(p[0]) &&
1760 * Get an incoming message as initiator.
1762 * The SCSI bus must already be in MESSAGE_IN_PHASE and there is a
1766 ncr53c9x_msgin(struct ncr53c9x_softc *sc)
1768 struct ncr53c9x_ecb *ecb;
1769 struct ncr53c9x_linfo *li;
1770 struct ncr53c9x_tinfo *ti;
1774 NCR_LOCK_ASSERT(sc, MA_OWNED);
1776 NCR_TRACE(("[%s(curmsglen:%ld)] ", __func__, (long)sc->sc_imlen));
1778 if (sc->sc_imlen == 0) {
1779 device_printf(sc->sc_dev, "msgin: no msg byte available\n");
1784 * Prepare for a new message. A message should (according
1785 * to the SCSI standard) be transmitted in one single
1786 * MESSAGE_IN_PHASE. If we have been in some other phase,
1787 * then this is a new message.
1789 if (sc->sc_prevphase != MESSAGE_IN_PHASE &&
1790 sc->sc_state != NCR_RESELECTED) {
1791 device_printf(sc->sc_dev, "phase change, dropping message, "
1792 "prev %d, state %d\n", sc->sc_prevphase, sc->sc_state);
1793 sc->sc_flags &= ~NCR_DROP_MSGI;
1798 * If we're going to reject the message, don't bother storing
1799 * the incoming bytes. But still, we need to ACK them.
1801 if ((sc->sc_flags & NCR_DROP_MSGI) != 0) {
1802 NCRCMD(sc, NCRCMD_MSGOK);
1803 device_printf(sc->sc_dev, "<dropping msg byte %x>",
1804 sc->sc_imess[sc->sc_imlen]);
1808 if (sc->sc_imlen >= NCR_MAX_MSG_LEN) {
1809 ncr53c9x_sched_msgout(SEND_REJECT);
1810 sc->sc_flags |= NCR_DROP_MSGI;
1812 switch (sc->sc_state) {
1814 * if received message is the first of reselection
1815 * then first byte is selid, and then message
1817 case NCR_RESELECTED:
1818 pb = sc->sc_imess + 1;
1819 len = sc->sc_imlen - 1;
1827 if (__verify_msg_format(pb, len))
1831 /* Acknowledge what we have so far. */
1832 NCRCMD(sc, NCRCMD_MSGOK);
1836 NCR_MSGS(("gotmsg(%x) state %d", sc->sc_imess[0], sc->sc_state));
1838 * We got a complete message, flush the imess.
1839 * XXX nobody uses imlen below.
1843 * Now we should have a complete message (1 byte, 2 byte
1844 * and moderately long extended messages). We only handle
1845 * extended messages which total length is shorter than
1846 * NCR_MAX_MSG_LEN. Longer messages will be amputated.
1848 switch (sc->sc_state) {
1851 ti = &sc->sc_tinfo[ecb->ccb->ccb_h.target_id];
1853 switch (sc->sc_imess[0]) {
1854 case MSG_CMDCOMPLETE:
1855 NCR_MSGS(("cmdcomplete "));
1856 if (sc->sc_dleft < 0) {
1857 xpt_print_path(ecb->ccb->ccb_h.path);
1858 printf("got %ld extra bytes\n",
1859 -(long)sc->sc_dleft);
1862 ecb->dleft = (ecb->flags & ECB_TENTATIVE_DONE) ?
1864 if ((ecb->flags & ECB_SENSE) == 0)
1865 ecb->ccb->csio.resid = ecb->dleft;
1866 sc->sc_state = NCR_CMDCOMPLETE;
1869 case MSG_MESSAGE_REJECT:
1870 NCR_MSGS(("msg reject (msgout=%x) ", sc->sc_msgout));
1871 switch (sc->sc_msgout) {
1874 * Target does not like tagged queuing.
1875 * - Flush the command queue
1876 * - Disable tagged queuing for the target
1877 * - Dequeue ecb from the queued array.
1879 device_printf(sc->sc_dev, "tagged queuing "
1880 "rejected: target %d\n",
1881 ecb->ccb->ccb_h.target_id);
1883 NCR_MSGS(("(rejected sent tag)"));
1884 NCRCMD(sc, NCRCMD_FLUSH);
1886 ti->flags &= ~T_TAG;
1887 lun = ecb->ccb->ccb_h.target_lun;
1888 li = TINFO_LUN(ti, lun);
1890 li->queued[ecb->tag[1]] != NULL) {
1891 li->queued[ecb->tag[1]] = NULL;
1894 ecb->tag[0] = ecb->tag[1] = 0;
1900 device_printf(sc->sc_dev, "sync transfer "
1901 "rejected: target %d\n",
1902 ecb->ccb->ccb_h.target_id);
1904 ti->flags &= ~T_SDTRSENT;
1905 ti->curr.period = ti->goal.period = 0;
1906 ti->curr.offset = ti->goal.offset = 0;
1907 ncr53c9x_setsync(sc, ti);
1911 device_printf(sc->sc_dev, "wide transfer "
1912 "rejected: target %d\n",
1913 ecb->ccb->ccb_h.target_id);
1915 ti->flags &= ~T_WDTRSENT;
1916 ti->curr.width = ti->goal.width =
1917 MSG_EXT_WDTR_BUS_8_BIT;
1918 ncr53c9x_setsync(sc, ti);
1921 case SEND_INIT_DET_ERR:
1927 NCR_MSGS(("noop "));
1930 case MSG_HEAD_OF_Q_TAG:
1931 case MSG_SIMPLE_Q_TAG:
1932 case MSG_ORDERED_Q_TAG:
1933 NCR_MSGS(("TAG %x:%x",
1934 sc->sc_imess[0], sc->sc_imess[1]));
1937 case MSG_DISCONNECT:
1938 NCR_MSGS(("disconnect "));
1940 sc->sc_state = NCR_DISCONNECT;
1943 * Mark the fact that all bytes have moved. The
1944 * target may not bother to do a SAVE POINTERS
1945 * at this stage. This flag will set the residual
1946 * count to zero on MSG COMPLETE.
1948 if (sc->sc_dleft == 0)
1949 ecb->flags |= ECB_TENTATIVE_DONE;
1952 case MSG_SAVEDATAPOINTER:
1953 NCR_MSGS(("save datapointer "));
1954 ecb->daddr = sc->sc_dp;
1955 ecb->dleft = sc->sc_dleft;
1958 case MSG_RESTOREPOINTERS:
1959 NCR_MSGS(("restore datapointer "));
1960 sc->sc_dp = ecb->daddr;
1961 sc->sc_dleft = ecb->dleft;
1964 case MSG_IGN_WIDE_RESIDUE:
1965 NCR_MSGS(("ignore wide residue (%d bytes)",
1967 if (sc->sc_imess[1] != 1) {
1968 xpt_print_path(ecb->ccb->ccb_h.path);
1969 printf("unexpected MESSAGE IGNORE WIDE "
1970 "RESIDUE (%d bytes); sending REJECT\n",
1975 * If there was a last transfer of an even number of
1976 * bytes, wipe the "done" memory and adjust by one
1977 * byte (sc->sc_imess[1]).
1979 len = sc->sc_dleft - ecb->dleft;
1980 if (len != 0 && (len & 1) == 0) {
1981 ecb->flags &= ~ECB_TENTATIVE_DONE;
1982 sc->sc_dp = (char *)sc->sc_dp - 1;
1988 NCR_MSGS(("extended(%x) ", sc->sc_imess[2]));
1989 switch (sc->sc_imess[2]) {
1991 NCR_MSGS(("SDTR period %d, offset %d ",
1992 sc->sc_imess[3], sc->sc_imess[4]));
1993 if (sc->sc_imess[1] != 3)
1995 ti->curr.period = sc->sc_imess[3];
1996 ti->curr.offset = sc->sc_imess[4];
1997 if (sc->sc_minsync == 0 ||
1998 ti->curr.offset == 0 ||
1999 ti->curr.period > 124) {
2001 #ifdef NCR53C9X_DEBUG
2002 xpt_print_path(ecb->ccb->ccb_h.path);
2003 printf("async mode\n");
2006 if ((ti->flags & T_SDTRSENT) == 0) {
2008 * target initiated negotiation
2010 ti->curr.offset = 0;
2011 ncr53c9x_sched_msgout(
2016 ncr53c9x_cpb2stp(sc,
2017 ncr53c9x_stp2cpb(sc,
2019 if ((ti->flags & T_SDTRSENT) == 0) {
2021 * target initiated negotiation
2023 if (ti->curr.period <
2027 if (ti->curr.offset >
2031 ncr53c9x_sched_msgout(
2035 ti->flags &= ~T_SDTRSENT;
2036 ti->goal.period = ti->curr.period;
2037 ti->goal.offset = ti->curr.offset;
2038 ncr53c9x_setsync(sc, ti);
2042 NCR_MSGS(("wide mode %d ", sc->sc_imess[3]));
2043 ti->curr.width = sc->sc_imess[3];
2044 if (!(ti->flags & T_WDTRSENT))
2046 * target initiated negotiation
2048 ncr53c9x_sched_msgout(SEND_WDTR);
2049 ti->flags &= ~T_WDTRSENT;
2050 ti->goal.width = ti->curr.width;
2051 ncr53c9x_setsync(sc, ti);
2055 xpt_print_path(ecb->ccb->ccb_h.path);
2056 printf("unrecognized MESSAGE EXTENDED 0x%x;"
2057 " sending REJECT\n", sc->sc_imess[2]);
2063 NCR_MSGS(("ident "));
2064 xpt_print_path(ecb->ccb->ccb_h.path);
2065 printf("unrecognized MESSAGE 0x%x; sending REJECT\n",
2069 ncr53c9x_sched_msgout(SEND_REJECT);
2074 case NCR_IDENTIFIED:
2076 * IDENTIFY message was received and queue tag is expected
2079 if ((sc->sc_imess[0] != MSG_SIMPLE_Q_TAG) ||
2080 (sc->sc_msgify == 0)) {
2081 device_printf(sc->sc_dev, "TAG reselect without "
2082 "IDENTIFY; MSG %x; sending DEVICE RESET\n",
2086 (void)ncr53c9x_reselect(sc, sc->sc_msgify,
2087 sc->sc_imess[0], sc->sc_imess[1]);
2090 case NCR_RESELECTED:
2091 if (MSG_ISIDENTIFY(sc->sc_imess[1]))
2092 sc->sc_msgify = sc->sc_imess[1];
2094 device_printf(sc->sc_dev, "reselect without IDENTIFY;"
2095 " MSG %x; sending DEVICE RESET\n", sc->sc_imess[1]);
2098 (void)ncr53c9x_reselect(sc, sc->sc_msgify, 0, 0);
2102 device_printf(sc->sc_dev, "unexpected MESSAGE IN; "
2103 "sending DEVICE RESET\n");
2106 ncr53c9x_sched_msgout(SEND_DEV_RESET);
2110 ncr53c9x_sched_msgout(SEND_ABORT);
2113 /* If we have more messages to send set ATN. */
2114 if (sc->sc_msgpriq) {
2115 NCRCMD(sc, NCRCMD_SETATN);
2116 sc->sc_flags |= NCR_ATN;
2119 /* Acknowledge last message byte. */
2120 NCRCMD(sc, NCRCMD_MSGOK);
2122 /* Done, reset message pointer. */
2123 sc->sc_flags &= ~NCR_DROP_MSGI;
2128 * Send the highest priority, scheduled message.
2131 ncr53c9x_msgout(struct ncr53c9x_softc *sc)
2133 struct ncr53c9x_tinfo *ti;
2134 struct ncr53c9x_ecb *ecb;
2137 #ifdef NCR53C9X_DEBUG
2141 NCR_LOCK_ASSERT(sc, MA_OWNED);
2143 NCR_TRACE(("[%s(priq:%x, prevphase:%x)]", __func__, sc->sc_msgpriq,
2147 * XXX - the NCR_ATN flag is not in sync with the actual ATN
2148 * condition on the SCSI bus. The 53c9x chip
2149 * automatically turns off ATN before sending the
2150 * message byte. (See also the comment below in the
2151 * default case when picking out a message to send.)
2153 if (sc->sc_flags & NCR_ATN) {
2154 if (sc->sc_prevphase != MESSAGE_OUT_PHASE) {
2156 NCRCMD(sc, NCRCMD_FLUSH);
2164 if (sc->sc_prevphase == MESSAGE_OUT_PHASE) {
2165 ncr53c9x_sched_msgout(sc->sc_msgoutq);
2168 device_printf(sc->sc_dev, "at line %d: unexpected "
2169 "MESSAGE OUT phase\n", __LINE__);
2172 if (sc->sc_omlen == 0) {
2173 /* Pick up highest priority message. */
2174 sc->sc_msgout = sc->sc_msgpriq & -sc->sc_msgpriq;
2175 sc->sc_msgoutq |= sc->sc_msgout;
2176 sc->sc_msgpriq &= ~sc->sc_msgout;
2177 sc->sc_omlen = 1; /* "Default" message len */
2178 switch (sc->sc_msgout) {
2181 ti = &sc->sc_tinfo[ecb->ccb->ccb_h.target_id];
2182 sc->sc_omess[0] = MSG_EXTENDED;
2183 sc->sc_omess[1] = MSG_EXT_SDTR_LEN;
2184 sc->sc_omess[2] = MSG_EXT_SDTR;
2185 sc->sc_omess[3] = ti->goal.period;
2186 sc->sc_omess[4] = ti->goal.offset;
2192 ti = &sc->sc_tinfo[ecb->ccb->ccb_h.target_id];
2193 sc->sc_omess[0] = MSG_EXTENDED;
2194 sc->sc_omess[1] = MSG_EXT_WDTR_LEN;
2195 sc->sc_omess[2] = MSG_EXT_WDTR;
2196 sc->sc_omess[3] = ti->goal.width;
2201 if (sc->sc_state != NCR_CONNECTED)
2202 device_printf(sc->sc_dev, "at line %d: no "
2203 "nexus\n", __LINE__);
2206 MSG_IDENTIFY(ecb->ccb->ccb_h.target_lun, 0);
2210 if (sc->sc_state != NCR_CONNECTED)
2211 device_printf(sc->sc_dev, "at line %d: no "
2212 "nexus\n", __LINE__);
2214 sc->sc_omess[0] = ecb->tag[0];
2215 sc->sc_omess[1] = ecb->tag[1];
2219 case SEND_DEV_RESET:
2220 sc->sc_flags |= NCR_ABORTING;
2221 sc->sc_omess[0] = MSG_BUS_DEV_RESET;
2223 ti = &sc->sc_tinfo[ecb->ccb->ccb_h.target_id];
2224 ti->curr.period = 0;
2225 ti->curr.offset = 0;
2226 ti->curr.width = MSG_EXT_WDTR_BUS_8_BIT;
2229 case SEND_PARITY_ERROR:
2230 sc->sc_omess[0] = MSG_PARITY_ERROR;
2234 sc->sc_flags |= NCR_ABORTING;
2235 sc->sc_omess[0] = MSG_ABORT;
2238 case SEND_INIT_DET_ERR:
2239 sc->sc_omess[0] = MSG_INITIATOR_DET_ERR;
2243 sc->sc_omess[0] = MSG_MESSAGE_REJECT;
2248 * We normally do not get here, since the chip
2249 * automatically turns off ATN before the last
2250 * byte of a message is sent to the target.
2251 * However, if the target rejects our (multi-byte)
2252 * message early by switching to MSG IN phase
2253 * ATN remains on, so the target may return to
2254 * MSG OUT phase. If there are no scheduled messages
2255 * left we send a NO-OP.
2257 * XXX - Note that this leaves no useful purpose for
2260 sc->sc_flags &= ~NCR_ATN;
2261 sc->sc_omess[0] = MSG_NOOP;
2263 sc->sc_omp = sc->sc_omess;
2266 #ifdef NCR53C9X_DEBUG
2267 if ((ncr53c9x_debug & NCR_SHOWMSGS) != 0) {
2268 NCR_MSGS(("<msgout:"));
2269 for (i = 0; i < sc->sc_omlen; i++)
2270 NCR_MSGS((" %02x", sc->sc_omess[i]));
2275 if (sc->sc_rev != NCR_VARIANT_FAS366) {
2276 /* (Re)send the message. */
2277 size = ulmin(sc->sc_omlen, sc->sc_maxxfer);
2278 error = NCRDMA_SETUP(sc, &sc->sc_omp, &sc->sc_omlen, 0, &size);
2282 /* Program the SCSI counter. */
2283 NCR_SET_COUNT(sc, size);
2285 /* Load the count in and start the message-out transfer. */
2286 NCRCMD(sc, NCRCMD_NOP | NCRCMD_DMA);
2287 NCRCMD(sc, NCRCMD_TRANS | NCRCMD_DMA);
2297 ncr53c9x_flushfifo(sc);
2298 ncr53c9x_wrfifo(sc, sc->sc_omp, sc->sc_omlen);
2299 NCRCMD(sc, NCRCMD_TRANS);
2303 ncr53c9x_intr(void *arg)
2305 struct ncr53c9x_softc *sc = arg;
2307 if (!NCRDMA_ISINTR(sc))
2318 * This is the most critical part of the driver, and has to know
2319 * how to deal with *all* error conditions and phases from the SCSI
2320 * bus. If there are no errors and the DMA was active, then call the
2321 * DMA pseudo-interrupt handler. If this returns 1, then that was it
2322 * and we can return from here without further processing.
2324 * Most of this needs verifying.
2327 ncr53c9x_intr1(struct ncr53c9x_softc *sc)
2329 struct ncr53c9x_ecb *ecb;
2330 struct ncr53c9x_linfo *li;
2331 struct ncr53c9x_tinfo *ti;
2332 struct timeval cur, wait;
2334 int error, i, nfifo;
2337 NCR_LOCK_ASSERT(sc, MA_OWNED);
2339 NCR_INTS(("[ncr53c9x_intr: state %d]", sc->sc_state));
2342 /* and what do the registers say... */
2343 ncr53c9x_readregs(sc);
2346 * At the moment, only a SCSI Bus Reset or Illegal
2347 * Command are classed as errors. A disconnect is a
2348 * valid condition, and we let the code check is the
2349 * "NCR_BUSFREE_OK" flag was set before declaring it
2352 * Also, the status register tells us about "Gross
2353 * Errors" and "Parity errors". Only the Gross Error
2354 * is really bad, and the parity errors are dealt
2358 * If there are too many parity error, go to slow
2362 if ((sc->sc_espintr & NCRINTR_SBR) != 0) {
2363 if ((NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF) != 0) {
2364 NCRCMD(sc, NCRCMD_FLUSH);
2367 if (sc->sc_state != NCR_SBR) {
2368 device_printf(sc->sc_dev, "SCSI bus reset\n");
2369 ncr53c9x_init(sc, 0); /* Restart everything. */
2373 /*XXX*/ device_printf(sc->sc_dev, "<expected bus reset: "
2374 "[intr %x, stat %x, step %d]>\n",
2375 sc->sc_espintr, sc->sc_espstat, sc->sc_espstep);
2377 if (sc->sc_nexus != NULL)
2378 panic("%s: nexus in reset state",
2379 device_get_nameunit(sc->sc_dev));
2385 #define NCRINTR_ERR (NCRINTR_SBR | NCRINTR_ILL)
2386 if (sc->sc_espintr & NCRINTR_ERR ||
2387 sc->sc_espstat & NCRSTAT_GE) {
2388 if ((sc->sc_espstat & NCRSTAT_GE) != 0) {
2389 /* Gross Error; no target? */
2390 if (NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF) {
2391 NCRCMD(sc, NCRCMD_FLUSH);
2394 if (sc->sc_state == NCR_CONNECTED ||
2395 sc->sc_state == NCR_SELECTING) {
2396 ecb->ccb->ccb_h.status = CAM_SEL_TIMEOUT;
2397 ncr53c9x_done(sc, ecb);
2402 if ((sc->sc_espintr & NCRINTR_ILL) != 0) {
2403 if ((sc->sc_flags & NCR_EXPECT_ILLCMD) != 0) {
2405 * Eat away "Illegal command" interrupt
2406 * on a ESP100 caused by a re-selection
2407 * while we were trying to select
2410 #ifdef NCR53C9X_DEBUG
2411 device_printf(sc->sc_dev, "ESP100 work-around "
2414 sc->sc_flags &= ~NCR_EXPECT_ILLCMD;
2417 /* Illegal command, out of sync? */
2418 device_printf(sc->sc_dev, "illegal command: 0x%x "
2419 "(state %d, phase %x, prevphase %x)\n",
2421 sc->sc_state, sc->sc_phase, sc->sc_prevphase);
2422 if (NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF) {
2423 NCRCMD(sc, NCRCMD_FLUSH);
2429 sc->sc_flags &= ~NCR_EXPECT_ILLCMD;
2432 * Call if DMA is active.
2434 * If DMA_INTR returns true, then maybe go 'round the loop
2435 * again in case there is no more DMA queued, but a phase
2436 * change is expected.
2438 if (NCRDMA_ISACTIVE(sc)) {
2439 if (NCRDMA_INTR(sc) == -1) {
2440 device_printf(sc->sc_dev, "DMA error; resetting\n");
2443 /* If DMA active here, then go back to work... */
2444 if (NCRDMA_ISACTIVE(sc))
2447 if ((sc->sc_espstat & NCRSTAT_TC) == 0) {
2449 * DMA not completed. If we can not find a
2450 * acceptable explanation, print a diagnostic.
2452 if (sc->sc_state == NCR_SELECTING)
2454 * This can happen if we are reselected
2455 * while using DMA to select a target.
2458 else if (sc->sc_prevphase == MESSAGE_OUT_PHASE) {
2460 * Our (multi-byte) message (eg SDTR) was
2461 * interrupted by the target to send
2463 * Print diagnostic if current phase
2464 * is not MESSAGE IN.
2466 if (sc->sc_phase != MESSAGE_IN_PHASE)
2467 device_printf(sc->sc_dev,"!TC on MSGOUT"
2468 " [intr %x, stat %x, step %d]"
2469 " prevphase %x, resid %lx\n",
2474 (u_long)sc->sc_omlen);
2475 } else if (sc->sc_dleft == 0) {
2477 * The DMA operation was started for
2478 * a DATA transfer. Print a diagnostic
2479 * if the DMA counter and TC bit
2480 * appear to be out of sync.
2482 * XXX This is fatal and usually means that
2483 * the DMA engine is hopelessly out of
2484 * sync with reality. A disk is likely
2485 * getting spammed at this point.
2487 device_printf(sc->sc_dev, "!TC on DATA XFER"
2488 " [intr %x, stat %x, step %d]"
2489 " prevphase %x, resid %x\n",
2494 ecb ? ecb->dleft : -1);
2501 * Check for less serious errors.
2503 if ((sc->sc_espstat & NCRSTAT_PE) != 0) {
2504 device_printf(sc->sc_dev, "SCSI bus parity error\n");
2505 if (sc->sc_prevphase == MESSAGE_IN_PHASE)
2506 ncr53c9x_sched_msgout(SEND_PARITY_ERROR);
2508 ncr53c9x_sched_msgout(SEND_INIT_DET_ERR);
2511 if ((sc->sc_espintr & NCRINTR_DIS) != 0) {
2513 NCR_INTS(("<DISC [intr %x, stat %x, step %d]>",
2514 sc->sc_espintr,sc->sc_espstat,sc->sc_espstep));
2515 if (NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF) {
2516 NCRCMD(sc, NCRCMD_FLUSH);
2522 * This command must (apparently) be issued within
2523 * 250mS of a disconnect. So here you are...
2525 NCRCMD(sc, NCRCMD_ENSEL);
2527 switch (sc->sc_state) {
2528 case NCR_RESELECTED:
2532 ecb->ccb->ccb_h.status = CAM_SEL_TIMEOUT;
2534 /* Selection timeout -- discard all LUNs if empty. */
2535 ti = &sc->sc_tinfo[ecb->ccb->ccb_h.target_id];
2536 li = LIST_FIRST(&ti->luns);
2537 while (li != NULL) {
2538 if (li->untagged == NULL && li->used == 0) {
2539 if (li->lun < NCR_NLUN)
2540 ti->lun[li->lun] = NULL;
2541 LIST_REMOVE(li, link);
2544 * Restart the search at the beginning.
2546 li = LIST_FIRST(&ti->luns);
2549 li = LIST_NEXT(li, link);
2555 ti = &sc->sc_tinfo[ecb->ccb->ccb_h.target_id];
2556 if ((ti->flags & T_SDTRSENT) != 0) {
2557 xpt_print_path(ecb->ccb->ccb_h.path);
2558 printf("sync nego not completed!\n");
2559 ti->flags &= ~T_SDTRSENT;
2560 ti->curr.period = ti->goal.period = 0;
2561 ti->curr.offset = ti->goal.offset = 0;
2562 ncr53c9x_setsync(sc, ti);
2564 if ((ti->flags & T_WDTRSENT) != 0) {
2565 xpt_print_path(ecb->ccb->ccb_h.path);
2566 printf("wide nego not completed!\n");
2567 ti->flags &= ~T_WDTRSENT;
2568 ti->curr.width = ti->goal.width =
2569 MSG_EXT_WDTR_BUS_8_BIT;
2570 ncr53c9x_setsync(sc, ti);
2574 /* It may be OK to disconnect. */
2575 if ((sc->sc_flags & NCR_ABORTING) == 0) {
2577 * Section 5.1.1 of the SCSI 2 spec
2578 * suggests issuing a REQUEST SENSE
2579 * following an unexpected disconnect.
2580 * Some devices go into a contingent
2581 * allegiance condition when
2582 * disconnecting, and this is necessary
2583 * to clean up their state.
2585 device_printf(sc->sc_dev, "unexpected "
2586 "disconnect [state %d, intr %x, stat %x, "
2587 "phase(c %x, p %x)]; ", sc->sc_state,
2588 sc->sc_espintr, sc->sc_espstat,
2589 sc->sc_phase, sc->sc_prevphase);
2592 * XXX This will cause a chip reset and will
2593 * prevent us from finding out the real
2594 * problem with the device. However, it's
2595 * necessary until a way can be found to
2596 * safely cancel the DMA that is in
2599 if (1 || (ecb->flags & ECB_SENSE) != 0) {
2600 printf("resetting\n");
2603 printf("sending REQUEST SENSE\n");
2604 callout_stop(&ecb->ch);
2605 ncr53c9x_sense(sc, ecb);
2607 } else if (ecb != NULL &&
2608 (ecb->flags & ECB_RESET) != 0) {
2609 ecb->ccb->ccb_h.status = CAM_REQ_CMP;
2613 ecb->ccb->ccb_h.status = CAM_CMD_TIMEOUT;
2616 case NCR_DISCONNECT:
2617 sc->sc_nexus = NULL;
2620 case NCR_CMDCOMPLETE:
2621 ecb->ccb->ccb_h.status = CAM_REQ_CMP;
2626 switch (sc->sc_state) {
2628 device_printf(sc->sc_dev, "waiting for Bus Reset to happen\n");
2631 case NCR_RESELECTED:
2633 * We must be continuing a message?
2635 device_printf(sc->sc_dev, "unhandled reselect continuation, "
2636 "state %d, intr %02x\n", sc->sc_state, sc->sc_espintr);
2640 case NCR_IDENTIFIED:
2642 if (sc->sc_phase != MESSAGE_IN_PHASE) {
2643 i = NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF;
2645 * Things are seriously screwed up.
2646 * Pull the brakes, i.e. reset.
2648 device_printf(sc->sc_dev, "target didn't send tag: %d "
2649 "bytes in FIFO\n", i);
2650 /* Drain and display FIFO. */
2652 printf("[%d] ", NCR_READ_REG(sc, NCR_FIFO));
2661 if (sc->sc_espintr & NCRINTR_RESEL) {
2662 sc->sc_msgpriq = sc->sc_msgout = sc->sc_msgoutq = 0;
2665 * If we're trying to select a
2666 * target ourselves, push our command
2667 * back into the ready list.
2669 if (sc->sc_state == NCR_SELECTING) {
2670 NCR_INTS(("backoff selector "));
2671 callout_stop(&ecb->ch);
2672 ncr53c9x_dequeue(sc, ecb);
2673 TAILQ_INSERT_HEAD(&sc->ready_list, ecb, chain);
2674 ecb->flags |= ECB_READY;
2675 ecb = sc->sc_nexus = NULL;
2677 sc->sc_state = NCR_RESELECTED;
2678 if (sc->sc_phase != MESSAGE_IN_PHASE) {
2680 * Things are seriously screwed up.
2681 * Pull the brakes, i.e. reset
2683 device_printf(sc->sc_dev, "target didn't "
2688 * The C90 only inhibits FIFO writes until reselection
2689 * is complete instead of waiting until the interrupt
2690 * status register has been read. So, if the reselect
2691 * happens while we were entering command bytes (for
2692 * another target) some of those bytes can appear in
2693 * the FIFO here, after the interrupt is taken.
2695 * To remedy this situation, pull the Selection ID
2696 * and Identify message from the FIFO directly, and
2697 * ignore any extraneous FIFO contents. Also, set
2698 * a flag that allows one Illegal Command Interrupt
2699 * to occur which the chip also generates as a result
2700 * of writing to the FIFO during a reselect.
2702 if (sc->sc_rev == NCR_VARIANT_ESP100) {
2704 NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF;
2705 sc->sc_imess[0] = NCR_READ_REG(sc, NCR_FIFO);
2706 sc->sc_imess[1] = NCR_READ_REG(sc, NCR_FIFO);
2709 /* Flush the rest. */
2710 NCRCMD(sc, NCRCMD_FLUSH);
2712 sc->sc_flags |= NCR_EXPECT_ILLCMD;
2714 nfifo = 2; /* We fixed it... */
2716 nfifo = ncr53c9x_rdfifo(sc, NCR_RDFIFO_START);
2719 device_printf(sc->sc_dev, "RESELECT: %d bytes "
2720 "in FIFO! [intr %x, stat %x, step %d, "
2729 sc->sc_selid = sc->sc_imess[0];
2730 NCR_INTS(("selid=%02x ", sc->sc_selid));
2732 /* Handle IDENTIFY message. */
2735 if (sc->sc_state != NCR_CONNECTED &&
2736 sc->sc_state != NCR_IDENTIFIED) {
2737 /* IDENTIFY fail?! */
2738 device_printf(sc->sc_dev, "identify failed, "
2739 "state %d, intr %02x\n", sc->sc_state,
2743 goto shortcut; /* i.e. next phase expected soon */
2746 #define NCRINTR_DONE (NCRINTR_FC | NCRINTR_BS)
2747 if ((sc->sc_espintr & NCRINTR_DONE) == NCRINTR_DONE) {
2749 * Arbitration won; examine the `step' register
2750 * to determine how far the selection could progress.
2754 * When doing path inquiry during boot
2755 * FAS100A trigger a stray interrupt which
2756 * we just ignore instead of panicing.
2758 if (sc->sc_state == NCR_IDLE &&
2759 sc->sc_espstep == 0)
2761 panic("%s: no nexus", __func__);
2764 ti = &sc->sc_tinfo[ecb->ccb->ccb_h.target_id];
2766 switch (sc->sc_espstep) {
2769 * The target did not respond with a
2770 * message out phase - probably an old
2771 * device that doesn't recognize ATN.
2772 * Clear ATN and just continue, the
2773 * target should be in the command
2775 * XXX check for command phase?
2777 NCRCMD(sc, NCRCMD_RSTATN);
2781 if (ti->curr.period == ti->goal.period &&
2782 ti->curr.offset == ti->goal.offset &&
2783 ti->curr.width == ti->goal.width &&
2785 device_printf(sc->sc_dev, "step 1 "
2786 "and no negotiation to perform "
2787 "or tag to send\n");
2790 if (sc->sc_phase != MESSAGE_OUT_PHASE) {
2791 device_printf(sc->sc_dev, "step 1 "
2792 "but not in MESSAGE_OUT_PHASE\n");
2795 sc->sc_prevphase = MESSAGE_OUT_PHASE; /* XXX */
2796 if (ecb->flags & ECB_RESET) {
2798 * A DEVICE RESET was scheduled and
2799 * ATNS used. As SEND_DEV_RESET has
2800 * the highest priority, the target
2801 * will reset and disconnect and we
2802 * will end up in ncr53c9x_done w/o
2803 * negotiating or sending a TAG. So
2804 * we just break here in order to
2805 * avoid warnings about negotiation
2806 * not having completed.
2808 ncr53c9x_sched_msgout(SEND_DEV_RESET);
2811 if (ti->curr.width != ti->goal.width) {
2812 ti->flags |= T_WDTRSENT | T_SDTRSENT;
2813 ncr53c9x_sched_msgout(SEND_WDTR |
2816 if (ti->curr.period != ti->goal.period ||
2817 ti->curr.offset != ti->goal.offset) {
2818 ti->flags |= T_SDTRSENT;
2819 ncr53c9x_sched_msgout(SEND_SDTR);
2821 if (ecb->tag[0] != 0)
2822 /* Could not do ATN3 so send TAG. */
2823 ncr53c9x_sched_msgout(SEND_TAG);
2828 * Grr, this is supposed to mean
2829 * "target left command phase prematurely".
2830 * It seems to happen regularly when
2832 * Look at FIFO to see if command went out.
2833 * (Timing problems?)
2835 if (sc->sc_features & NCR_F_DMASELECT) {
2836 if (sc->sc_cmdlen == 0) {
2837 /* Hope for the best... */
2840 } else if ((NCR_READ_REG(sc, NCR_FFLAG) &
2842 /* Hope for the best... */
2845 xpt_print_path(ecb->ccb->ccb_h.path);
2846 printf("selection failed; %d left in FIFO "
2847 "[intr %x, stat %x, step %d]\n",
2848 NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF,
2849 sc->sc_espintr, sc->sc_espstat,
2851 NCRCMD(sc, NCRCMD_FLUSH);
2852 ncr53c9x_sched_msgout(SEND_ABORT);
2856 /* Select stuck at Command Phase. */
2857 NCRCMD(sc, NCRCMD_FLUSH);
2861 if (sc->sc_features & NCR_F_DMASELECT &&
2862 sc->sc_cmdlen != 0) {
2863 xpt_print_path(ecb->ccb->ccb_h.path);
2864 printf("select; %lu left in DMA buffer "
2865 "[intr %x, stat %x, step %d]\n",
2866 (u_long)sc->sc_cmdlen,
2871 /* So far, everything went fine. */
2875 sc->sc_prevphase = INVALID_PHASE; /* ??? */
2876 /* Do an implicit RESTORE POINTERS. */
2877 sc->sc_dp = ecb->daddr;
2878 sc->sc_dleft = ecb->dleft;
2879 sc->sc_state = NCR_CONNECTED;
2882 device_printf(sc->sc_dev, "unexpected status after "
2883 "select: [intr %x, stat %x, step %x]\n",
2884 sc->sc_espintr, sc->sc_espstat, sc->sc_espstep);
2885 NCRCMD(sc, NCRCMD_FLUSH);
2889 if (sc->sc_state == NCR_IDLE) {
2890 device_printf(sc->sc_dev, "stray interrupt\n");
2896 if ((sc->sc_flags & NCR_ICCS) != 0) {
2897 /* "Initiate Command Complete Steps" in progress */
2898 sc->sc_flags &= ~NCR_ICCS;
2900 if ((sc->sc_espintr & NCRINTR_DONE) == 0) {
2901 device_printf(sc->sc_dev, "ICCS: "
2902 ": [intr %x, stat %x, step %x]\n",
2903 sc->sc_espintr, sc->sc_espstat,
2906 ncr53c9x_rdfifo(sc, NCR_RDFIFO_START);
2907 if (sc->sc_imlen < 2)
2908 device_printf(sc->sc_dev, "can't get status, "
2909 "only %d bytes\n", (int)sc->sc_imlen);
2910 ecb->stat = sc->sc_imess[sc->sc_imlen - 2];
2911 msg = sc->sc_imess[sc->sc_imlen - 1];
2912 NCR_PHASE(("<stat:(%x,%x)>", ecb->stat, msg));
2913 if (msg == MSG_CMDCOMPLETE) {
2915 (ecb->flags & ECB_TENTATIVE_DONE) ?
2917 if ((ecb->flags & ECB_SENSE) == 0)
2918 ecb->ccb->csio.resid = ecb->dleft;
2919 sc->sc_state = NCR_CMDCOMPLETE;
2921 device_printf(sc->sc_dev, "STATUS_PHASE: "
2924 NCRCMD(sc, NCRCMD_MSGOK);
2925 goto shortcut; /* i.e. wait for disconnect */
2930 device_printf(sc->sc_dev, "invalid state: %d [intr %x, "
2931 "phase(c %x, p %x)]\n", sc->sc_state,
2932 sc->sc_espintr, sc->sc_phase, sc->sc_prevphase);
2937 * Driver is now in state NCR_CONNECTED, i.e. we
2938 * have a current command working the SCSI bus.
2940 if (sc->sc_state != NCR_CONNECTED || ecb == NULL)
2941 panic("%s: no nexus", __func__);
2943 switch (sc->sc_phase) {
2944 case MESSAGE_OUT_PHASE:
2945 NCR_PHASE(("MESSAGE_OUT_PHASE "));
2946 ncr53c9x_msgout(sc);
2947 sc->sc_prevphase = MESSAGE_OUT_PHASE;
2950 case MESSAGE_IN_PHASE:
2952 NCR_PHASE(("MESSAGE_IN_PHASE "));
2953 if ((sc->sc_espintr & NCRINTR_BS) != 0) {
2954 if ((sc->sc_rev != NCR_VARIANT_FAS366) ||
2955 (sc->sc_espstat2 & NCRFAS_STAT2_EMPTY) == 0) {
2956 NCRCMD(sc, NCRCMD_FLUSH);
2958 sc->sc_flags |= NCR_WAITI;
2959 NCRCMD(sc, NCRCMD_TRANS);
2960 } else if ((sc->sc_espintr & NCRINTR_FC) != 0) {
2961 if ((sc->sc_flags & NCR_WAITI) == 0) {
2962 device_printf(sc->sc_dev, "MSGIN: unexpected "
2963 "FC bit: [intr %x, stat %x, step %x]\n",
2964 sc->sc_espintr, sc->sc_espstat,
2967 sc->sc_flags &= ~NCR_WAITI;
2969 (sc->sc_prevphase == sc->sc_phase) ?
2970 NCR_RDFIFO_CONTINUE : NCR_RDFIFO_START);
2973 device_printf(sc->sc_dev, "MSGIN: weird bits: "
2974 "[intr %x, stat %x, step %x]\n",
2975 sc->sc_espintr, sc->sc_espstat, sc->sc_espstep);
2976 sc->sc_prevphase = MESSAGE_IN_PHASE;
2977 goto shortcut; /* i.e. expect data to be ready */
2981 * Send the command block. Normally we don't see this
2982 * phase because the SEL_ATN command takes care of
2983 * all this. However, we end up here if either the
2984 * target or we wanted to exchange some more messages
2985 * first (e.g. to start negotiations).
2988 NCR_PHASE(("COMMAND_PHASE 0x%02x (%d) ",
2989 ecb->cmd.cmd.opcode, ecb->clen));
2990 if (NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF) {
2991 NCRCMD(sc, NCRCMD_FLUSH);
2997 * If we have more messages to send, e.g. WDTR or SDTR
2998 * after we've sent a TAG, set ATN so we'll go back to
2999 * MESSAGE_OUT_PHASE.
3001 if (sc->sc_msgpriq) {
3002 NCRCMD(sc, NCRCMD_SETATN);
3003 sc->sc_flags |= NCR_ATN;
3005 if (sc->sc_features & NCR_F_DMASELECT) {
3006 /* Setup DMA transfer for command. */
3008 sc->sc_cmdlen = size;
3009 sc->sc_cmdp = (void *)&ecb->cmd.cmd;
3010 error = NCRDMA_SETUP(sc, &sc->sc_cmdp, &sc->sc_cmdlen,
3015 /* Program the SCSI counter. */
3016 NCR_SET_COUNT(sc, size);
3018 /* Load the count in. */
3019 NCRCMD(sc, NCRCMD_NOP | NCRCMD_DMA);
3021 /* Start the command transfer. */
3022 NCRCMD(sc, NCRCMD_TRANS | NCRCMD_DMA);
3024 sc->sc_prevphase = COMMAND_PHASE;
3029 ncr53c9x_wrfifo(sc, (uint8_t *)&ecb->cmd.cmd, ecb->clen);
3030 NCRCMD(sc, NCRCMD_TRANS);
3031 sc->sc_prevphase = COMMAND_PHASE;
3034 case DATA_OUT_PHASE:
3035 NCR_PHASE(("DATA_OUT_PHASE [%ld] ", (long)sc->sc_dleft));
3036 sc->sc_prevphase = DATA_OUT_PHASE;
3037 NCRCMD(sc, NCRCMD_FLUSH);
3038 size = ulmin(sc->sc_dleft, sc->sc_maxxfer);
3039 error = NCRDMA_SETUP(sc, &sc->sc_dp, &sc->sc_dleft, 0, &size);
3043 NCR_PHASE(("DATA_IN_PHASE "));
3044 sc->sc_prevphase = DATA_IN_PHASE;
3045 if (sc->sc_rev == NCR_VARIANT_ESP100)
3046 NCRCMD(sc, NCRCMD_FLUSH);
3047 size = ulmin(sc->sc_dleft, sc->sc_maxxfer);
3048 error = NCRDMA_SETUP(sc, &sc->sc_dp, &sc->sc_dleft, 1, &size);
3053 ecb->ccb->ccb_h.status |= CAM_REQ_TOO_BIG;
3056 panic("%s: cannot deal with deferred DMA",
3059 ecb->ccb->ccb_h.status |= CAM_REQ_INVALID;
3062 ecb->ccb->ccb_h.status |= CAM_REQUEUE_REQ;
3065 ecb->ccb->ccb_h.status |= CAM_REQ_CMP_ERR;
3070 /* Target returned to data phase: wipe "done" memory. */
3071 ecb->flags &= ~ECB_TENTATIVE_DONE;
3073 /* Program the SCSI counter. */
3074 NCR_SET_COUNT(sc, size);
3076 /* Load the count in. */
3077 NCRCMD(sc, NCRCMD_NOP | NCRCMD_DMA);
3080 * Note that if `size' is 0, we've already transceived
3081 * all the bytes we want but we're still in DATA PHASE.
3082 * Apparently, the device needs padding. Also, a
3083 * transfer size of 0 means "maximum" to the chip
3087 (size == 0 ? NCRCMD_TRPAD : NCRCMD_TRANS) | NCRCMD_DMA);
3092 NCR_PHASE(("STATUS_PHASE "));
3093 sc->sc_flags |= NCR_ICCS;
3094 NCRCMD(sc, NCRCMD_ICCS);
3095 sc->sc_prevphase = STATUS_PHASE;
3096 goto shortcut; /* i.e. expect status results soon */
3102 device_printf(sc->sc_dev,
3103 "unexpected bus phase; resetting\n");
3110 ncr53c9x_init(sc, 1);
3114 ncr53c9x_done(sc, ecb);
3118 sc->sc_state = NCR_IDLE;
3124 * The idea is that many of the SCSI operations take very little
3125 * time, and going away and getting interrupted is too high an
3126 * overhead to pay. For example, selecting, sending a message
3127 * and command and then doing some work can be done in one "pass".
3129 * The delay is a heuristic. It is 2 when at 20 MHz, 2 at 25 MHz and
3130 * 1 at 40 MHz. This needs testing.
3133 wait.tv_usec += 50 / sc->sc_freq;
3134 if (wait.tv_usec > 1000000) {
3136 wait.tv_usec -= 1000000;
3139 if (NCRDMA_ISINTR(sc))
3142 } while (cur.tv_sec <= wait.tv_sec && cur.tv_usec <= wait.tv_usec);
3146 ncr53c9x_abort(struct ncr53c9x_softc *sc, struct ncr53c9x_ecb *ecb)
3149 NCR_LOCK_ASSERT(sc, MA_OWNED);
3151 /* 2 secs for the abort */
3152 ecb->timeout = NCR_ABORT_TIMEOUT;
3153 ecb->flags |= ECB_ABORT;
3155 if (ecb == sc->sc_nexus) {
3157 * If we're still selecting, the message will be scheduled
3158 * after selection is complete.
3160 if (sc->sc_state == NCR_CONNECTED)
3161 ncr53c9x_sched_msgout(SEND_ABORT);
3164 * Reschedule callout.
3166 callout_reset(&ecb->ch, mstohz(ecb->timeout),
3167 ncr53c9x_callout, ecb);
3170 * Just leave the command where it is.
3171 * XXX - what choice do we have but to reset the SCSI
3174 if (sc->sc_state == NCR_IDLE)
3180 ncr53c9x_callout(void *arg)
3182 struct ncr53c9x_ecb *ecb = arg;
3183 union ccb *ccb = ecb->ccb;
3184 struct ncr53c9x_softc *sc = ecb->sc;
3185 struct ncr53c9x_tinfo *ti;
3187 NCR_LOCK_ASSERT(sc, MA_OWNED);
3189 ti = &sc->sc_tinfo[ccb->ccb_h.target_id];
3190 xpt_print_path(ccb->ccb_h.path);
3191 device_printf(sc->sc_dev, "timed out [ecb %p (flags 0x%x, dleft %x, "
3192 "stat %x)], <state %d, nexus %p, phase(l %x, c %x, p %x), "
3193 "resid %lx, msg(q %x,o %x) %s>",
3194 ecb, ecb->flags, ecb->dleft, ecb->stat,
3195 sc->sc_state, sc->sc_nexus,
3196 NCR_READ_REG(sc, NCR_STAT),
3197 sc->sc_phase, sc->sc_prevphase,
3198 (long)sc->sc_dleft, sc->sc_msgpriq, sc->sc_msgout,
3199 NCRDMA_ISACTIVE(sc) ? "DMA active" : "");
3200 #if defined(NCR53C9X_DEBUG) && NCR53C9X_DEBUG > 1
3201 printf("TRACE: %s.", ecb->trace);
3204 if (ecb->flags & ECB_ABORT) {
3205 /* Abort timed out. */
3207 ncr53c9x_init(sc, 1);
3209 /* Abort the operation that has timed out. */
3211 ccb->ccb_h.status = CAM_CMD_TIMEOUT;
3212 ncr53c9x_abort(sc, ecb);
3214 /* Disable sync mode if stuck in a data phase. */
3215 if (ecb == sc->sc_nexus && ti->curr.offset != 0 &&
3216 (sc->sc_phase & (MSGI | CDI)) == 0) {
3217 /* XXX ASYNC CALLBACK! */
3218 ti->goal.offset = 0;
3219 xpt_print_path(ccb->ccb_h.path);
3220 printf("sync negotiation disabled\n");
3226 ncr53c9x_watch(void *arg)
3228 struct ncr53c9x_softc *sc = arg;
3229 struct ncr53c9x_linfo *li;
3230 struct ncr53c9x_tinfo *ti;
3234 NCR_LOCK_ASSERT(sc, MA_OWNED);
3236 /* Delete any structures that have not been used in 10min. */
3237 old = time_second - (10 * 60);
3239 for (t = 0; t < sc->sc_ntarg; t++) {
3240 ti = &sc->sc_tinfo[t];
3241 li = LIST_FIRST(&ti->luns);
3243 if (li->last_used < old &&
3244 li->untagged == NULL &&
3246 if (li->lun < NCR_NLUN)
3247 ti->lun[li->lun] = NULL;
3248 LIST_REMOVE(li, link);
3250 /* Restart the search at the beginning. */
3251 li = LIST_FIRST(&ti->luns);
3254 li = LIST_NEXT(li, link);
3257 callout_reset(&sc->sc_watchdog, 60 * hz, ncr53c9x_watch, sc);