2 * Copyright (c) 2015-2016 Hiroki Mori.
3 * Copyright (c) 2011-2012 Stefan Bethke.
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30 #ifndef _DEV_ETHERSWITCH_RTL8366RBVAR_H_
31 #define _DEV_ETHERSWITCH_RTL8366RBVAR_H_
36 #define RTL8366_IIC_ADDR 0xa8
37 #define RTL_IICBUS_TIMEOUT 100 /* us */
38 #define RTL_IICBUS_READ 1
39 #define RTL_IICBUS_WRITE 0
40 /* number of times to try and select the chip on the I2C bus */
41 #define RTL_IICBUS_RETRIES 3
42 #define RTL_IICBUS_RETRY_SLEEP (hz/1000)
44 /* Register definitions */
46 /* Switch Global Configuration */
47 #define RTL8366_SGCR 0x0000
48 #define RTL8366_SGCR_EN_BC_STORM_CTRL 0x0001
49 #define RTL8366_SGCR_MAX_LENGTH_MASK 0x0030
50 #define RTL8366_SGCR_MAX_LENGTH_1522 0x0000
51 #define RTL8366_SGCR_MAX_LENGTH_1536 0x0010
52 #define RTL8366_SGCR_MAX_LENGTH_1552 0x0020
53 #define RTL8366_SGCR_MAX_LENGTH_9216 0x0030
54 #define RTL8366_SGCR_EN_VLAN 0x2000
55 #define RTL8366_SGCR_EN_VLAN_4KTB 0x4000
56 #define RTL8366_SGCR_EN_QOS 0x8000
58 /* Port Enable Control: DISABLE_PORT[5:0] */
59 #define RTL8366_PECR 0x0001
61 /* Switch Security Control 0: DIS_LEARN[5:0] */
62 #define RTL8366_SSCR0 0x0002
64 /* Switch Security Control 1: DIS_AGE[5:0] */
65 #define RTL8366_SSCR1 0x0003
67 /* Switch Security Control 2 */
68 #define RTL8366_SSCR2 0x0004
69 #define RTL8366_SSCR2_DROP_UNKNOWN_DA 0x0001
71 /* Port Link Status: two ports per register */
72 #define RTL8366_PLSR_BASE (sc->chip_type == 0 ? 0x0014 : 0x0060)
73 #define RTL8366_PLSR_SPEED_MASK 0x03
74 #define RTL8366_PLSR_SPEED_10 0x00
75 #define RTL8366_PLSR_SPEED_100 0x01
76 #define RTL8366_PLSR_SPEED_1000 0x02
77 #define RTL8366_PLSR_FULLDUPLEX 0x04
78 #define RTL8366_PLSR_LINK 0x10
79 #define RTL8366_PLSR_TXPAUSE 0x20
80 #define RTL8366_PLSR_RXPAUSE 0x40
81 #define RTL8366_PLSR_NO_AUTO 0x80
83 /* VLAN Member Configuration, 3 or 2 registers per VLAN */
84 #define RTL8366_VMCR_BASE (sc->chip_type == 0 ? 0x0020 : 0x0016)
85 #define RTL8366_VMCR_MULT (sc->chip_type == 0 ? 3 : 2)
86 #define RTL8366_VMCR_DOT1Q_REG 0
87 #define RTL8366_VMCR_DOT1Q_VID_SHIFT 0
88 #define RTL8366_VMCR_DOT1Q_VID_MASK 0x0fff
89 #define RTL8366_VMCR_DOT1Q_PCP_SHIFT 12
90 #define RTL8366_VMCR_DOT1Q_PCP_MASK 0x7000
91 #define RTL8366_VMCR_MU_REG 1
92 #define RTL8366_VMCR_MU_MEMBER_SHIFT 0
93 #define RTL8366_VMCR_MU_MEMBER_MASK (sc->chip_type == 0 ? 0x00ff : 0x003f)
94 #define RTL8366_VMCR_MU_UNTAG_SHIFT (sc->chip_type == 0 ? 8 : 6)
95 #define RTL8366_VMCR_MU_UNTAG_MASK (sc->chip_type == 0 ? 0xff00 : 0x0fc0)
96 #define RTL8366_VMCR_FID_REG (sc->chip_type == 0 ? 2 : 1)
97 #define RTL8366_VMCR_FID_FID_SHIFT (sc->chip_type == 0 ? 0 : 12)
98 #define RTL8366_VMCR_FID_FID_MASK (sc->chip_type == 0 ? 0x0007 : 0x7000)
99 #define RTL8366_VMCR(_reg, _vlan) \
100 (RTL8366_VMCR_BASE + _reg + _vlan * RTL8366_VMCR_MULT)
101 /* VLAN Identifier */
102 #define RTL8366_VMCR_VID(_r) \
103 (_r[RTL8366_VMCR_DOT1Q_REG] & RTL8366_VMCR_DOT1Q_VID_MASK)
104 /* Priority Code Point */
105 #define RTL8366_VMCR_PCP(_r) \
106 ((_r[RTL8366_VMCR_DOT1Q_REG] & RTL8366_VMCR_DOT1Q_PCP_MASK) \
107 >> RTL8366_VMCR_DOT1Q_PCP_SHIFT)
109 #define RTL8366_VMCR_MEMBER(_r) \
110 (_r[RTL8366_VMCR_MU_REG] & RTL8366_VMCR_MU_MEMBER_MASK)
112 #define RTL8366_VMCR_UNTAG(_r) \
113 ((_r[RTL8366_VMCR_MU_REG] & RTL8366_VMCR_MU_UNTAG_MASK) \
114 >> RTL8366_VMCR_MU_UNTAG_SHIFT)
116 #define RTL8366_VMCR_FID(_r) \
117 (sc->chip_type == 0 ? (_r[RTL8366_VMCR_FID_REG] & RTL8366_VMCR_FID_FID_MASK) : \
118 ((_r[RTL8366_VMCR_FID_REG] & RTL8366_VMCR_FID_FID_MASK) \
119 >> RTL8366_VMCR_FID_FID_SHIFT))
122 * Port VLAN Control, 4 ports per register
123 * Determines the VID for untagged ingress frames through
126 #define RTL8366_PVCR_BASE (sc->chip_type == 0 ? 0x0063 : 0x0058)
127 #define RTL8366_PVCR_PORT_SHIFT 4
128 #define RTL8366_PVCR_PORT_PERREG (16 / RTL8366_PVCR_PORT_SHIFT)
129 #define RTL8366_PVCR_PORT_MASK 0x000f
130 #define RTL8366_PVCR_REG(_port) \
131 (RTL8366_PVCR_BASE + _port / (RTL8366_PVCR_PORT_PERREG))
132 #define RTL8366_PVCR_VAL(_port, _pvlan) \
133 ((_pvlan & RTL8366_PVCR_PORT_MASK) << \
134 ((_port % RTL8366_PVCR_PORT_PERREG) * RTL8366_PVCR_PORT_SHIFT))
135 #define RTL8366_PVCR_GET(_port, _val) \
136 (((_val) >> ((_port % RTL8366_PVCR_PORT_PERREG) * RTL8366_PVCR_PORT_SHIFT)) & RTL8366_PVCR_PORT_MASK)
139 #define RTL8366_RCR 0x0100
140 #define RTL8366_RCR_HARD_RESET 0x0001
141 #define RTL8366_RCR_SOFT_RESET 0x0002
143 /* Chip Version Control: CHIP_VER[3:0] */
144 #define RTL8366_CVCR (sc->chip_type == 0 ? 0x050A : 0x0104)
145 /* Chip Identifier */
146 #define RTL8366RB_CIR 0x0509
147 #define RTL8366RB_CIR_ID8366RB 0x5937
148 #define RTL8366SR_CIR 0x0105
149 #define RTL8366SR_CIR_ID8366SR 0x8366
151 /* VLAN Ingress Control 2: [5:0] */
152 #define RTL8366_VIC2R 0x037f
155 #define RTL8366_MCNT_BASE 0x1000
156 #define RTL8366_MCTLR (sc->chip_type == 0 ? 0x13f0 : 0x11F0)
157 #define RTL8366_MCTLR_BUSY 0x0001
158 #define RTL8366_MCTLR_RESET 0x0002
159 #define RTL8366_MCTLR_RESET_PORT_MASK 0x00fc
160 #define RTL8366_MCTLR_RESET_ALL 0x0800
162 #define RTL8366_MCNT(_port, _r) \
163 (RTL8366_MCNT_BASE + 0x50 * (_port) + (_r))
164 #define RTL8366_MCTLR_RESET_PORT(_p) \
167 /* PHY Access Control */
168 #define RTL8366_PACR (sc->chip_type == 0 ? 0x8000 : 0x8028)
169 #define RTL8366_PACR_WRITE 0x0000
170 #define RTL8366_PACR_READ 0x0001
172 /* PHY Access Data */
173 #define RTL8366_PADR (sc->chip_type == 0 ? 0x8002 : 0x8029)
175 #define RTL8366_PHYREG(phy, page, reg) \
176 (0x8000 | (1 << (((phy) & 0x1f) + 9)) | (((page) & (sc->chip_type == 0 ? 0xf : 0x7)) << 5) | ((reg) & 0x1f))
178 /* general characteristics of the chip */
179 #define RTL8366_NUM_PHYS 5
180 #define RTL8366_NUM_VLANS 16
181 #define RTL8366_NUM_PHY_REG 32