2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
4 * Copyright (c) 2004-2005 M. Warner Losh.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
29 #include <sys/cdefs.h>
30 __FBSDID("$FreeBSD$");
32 #include <sys/param.h>
35 #include <sys/kernel.h>
37 #include <sys/module.h>
38 #include <sys/mutex.h>
40 #include <sys/systm.h>
42 #include <machine/bus.h>
44 #include <dev/fdc/fdcvar.h>
46 #include <isa/isavar.h>
47 #include <isa/isareg.h>
49 static int fdc_isa_probe(device_t);
51 static struct isa_pnp_id fdc_ids[] = {
52 {0x0007d041, "PC standard floppy controller"}, /* PNP0700 */
53 {0x0107d041, "Standard floppy controller supporting MS Device Bay Spec"}, /* PNP0701 */
58 * On standard ISA, we don't just use an 8 port range
59 * (e.g. 0x3f0-0x3f7) since that covers an IDE control register at
60 * 0x3f6. So, on older hardware, we use 0x3f0-0x3f5 and 0x3f7.
61 * However, some BIOSs omit the control port, while others start at
62 * 0x3f2. Of the latter, sometimes we have two resources, other times
63 * we have one. We have to deal with the following cases:
65 * 1: 0x3f0-0x3f5 # very rare
66 * 2: 0x3f0 # hints -> 0x3f0-0x3f5,0x3f7
67 * 3: 0x3f0-0x3f5,0x3f7 # Most common
68 * 4: 0x3f2-0x3f5,0x3f7 # Second most common
69 * 5: 0x3f2-0x3f5 # implies 0x3f7 too.
70 * 6: 0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 # becoming common
71 * 7: 0x3f2-0x3f3,0x3f4-0x3f5 # rare
72 * 8: 0x3f0-0x3f1,0x3f2-0x3f3,0x3f4-0x3f5,0x3f7
73 * 9: 0x3f0-0x3f3,0x3f4-0x3f5,0x3f7
75 * The following code is generic for any value of 0x3fx. It is also
76 * generic for all the above cases, as well as cases where things are
80 fdc_isa_alloc_resources(device_t dev, struct fdc_data *fdc)
83 int i, j, rid, newrid, nport;
88 for (i = 0; i < FDC_MAXREG; i++)
91 nport = isa_get_logicalid(dev) ? 1 : 6;
92 for (rid = 0; ; rid++) {
94 res = bus_alloc_resource_anywhere(dev, SYS_RES_IOPORT, &newrid,
95 rid == 0 ? nport : 1, RF_ACTIVE);
99 * Mask off the upper bits of the register, and sanity
100 * check resource ranges.
102 i = rman_get_start(res) & 0x7;
103 if (i + rman_get_size(res) - 1 > FDC_MAXREG) {
104 bus_release_resource(dev, SYS_RES_IOPORT, newrid, res);
107 for (j = 0; j < rman_get_size(res); j++) {
108 fdc->resio[i + j] = res;
109 fdc->ridio[i + j] = newrid;
110 fdc->ioff[i + j] = j;
111 fdc->ioh[i + j] = rman_get_bushandle(res);
114 if (fdc->resio[2] == NULL) {
115 device_printf(dev, "No FDOUT register!\n");
118 fdc->iot = rman_get_bustag(fdc->resio[2]);
119 if (fdc->resio[7] == NULL) {
120 port = (rman_get_start(fdc->resio[2]) & ~0x7) + 7;
122 res = bus_alloc_resource(dev, SYS_RES_IOPORT, &newrid, port,
125 device_printf(dev, "Faking up FDCTL\n");
126 fdc->resio[7] = fdc->resio[2];
127 fdc->ridio[7] = fdc->ridio[2];
128 fdc->ioff[7] = fdc->ioff[2] + 5;
129 fdc->ioh[7] = fdc->ioh[2];
132 fdc->ridio[7] = newrid;
133 fdc->ioff[7] = rman_get_start(res) & 7;
134 fdc->ioh[7] = rman_get_bushandle(res);
138 fdc->res_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &fdc->rid_irq,
139 RF_ACTIVE | RF_SHAREABLE);
140 if (fdc->res_irq == NULL) {
141 device_printf(dev, "cannot reserve interrupt line\n");
145 if ((fdc->flags & FDC_NODMA) == 0) {
146 fdc->res_drq = bus_alloc_resource_any(dev, SYS_RES_DRQ,
147 &fdc->rid_drq, RF_ACTIVE | RF_SHAREABLE);
148 if (fdc->res_drq == NULL) {
149 device_printf(dev, "cannot reserve DMA request line\n");
150 /* This is broken and doesn't work for ISA case */
151 fdc->flags |= FDC_NODMA;
153 fdc->dmachan = rman_get_start(fdc->res_drq);
160 fdc_isa_probe(device_t dev)
163 struct fdc_data *fdc;
165 fdc = device_get_softc(dev);
169 error = ISA_PNP_PROBE(device_get_parent(dev), dev, fdc_ids);
173 /* Attempt to allocate our resources for the duration of the probe */
174 error = fdc_isa_alloc_resources(dev, fdc);
176 error = fdc_initial_reset(dev, fdc);
178 fdc_release_resources(fdc);
183 fdc_isa_attach(device_t dev)
185 struct fdc_data *fdc;
188 fdc = device_get_softc(dev);
190 error = fdc_isa_alloc_resources(dev, fdc);
192 error = fdc_attach(dev);
194 error = fdc_hints_probe(dev);
196 fdc_start_worker(dev);
198 fdc_release_resources(fdc);
202 static device_method_t fdc_methods[] = {
203 /* Device interface */
204 DEVMETHOD(device_probe, fdc_isa_probe),
205 DEVMETHOD(device_attach, fdc_isa_attach),
206 DEVMETHOD(device_detach, fdc_detach),
207 DEVMETHOD(device_shutdown, bus_generic_shutdown),
208 DEVMETHOD(device_suspend, bus_generic_suspend),
209 DEVMETHOD(device_resume, bus_generic_resume),
212 DEVMETHOD(bus_print_child, fdc_print_child),
213 DEVMETHOD(bus_read_ivar, fdc_read_ivar),
214 DEVMETHOD(bus_write_ivar, fdc_write_ivar),
215 /* Our children never use any other bus interface methods. */
220 static driver_t fdc_driver = {
223 sizeof(struct fdc_data)
226 DRIVER_MODULE(fdc, isa, fdc_driver, fdc_devclass, 0, 0);
227 ISA_PNP_INFO(fdc_ids);