2 * All Rights Reserved, Copyright (C) Fujitsu Limited 1995
4 * This software may be used, modified, copied, distributed, and sold, in
5 * both source and binary form provided that the above copyright, these
6 * terms and the following disclaimer are retained. The name of the author
7 * and/or the contributor may not be used to endorse or promote products
8 * derived from this software without specific prior written permission.
10 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND THE CONTRIBUTOR ``AS IS'' AND
11 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
12 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
13 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR THE CONTRIBUTOR BE LIABLE
14 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
15 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
16 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION.
17 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
18 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
19 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24 #include <sys/cdefs.h>
25 __FBSDID("$FreeBSD$");
27 #include <sys/param.h>
28 #include <sys/kernel.h>
29 #include <sys/socket.h>
30 #include <sys/systm.h>
31 #include <sys/module.h>
34 #include <machine/bus.h>
37 #include <net/ethernet.h>
39 #include <net/if_mib.h>
40 #include <net/if_media.h>
42 #include <netinet/in.h>
43 #include <netinet/if_ether.h>
45 #include <dev/fe/mb86960.h>
46 #include <dev/fe/if_fereg.h>
47 #include <dev/fe/if_fevar.h>
49 #include <dev/pccard/pccardvar.h>
50 #include <dev/pccard/pccard_cis.h>
53 #include "pccarddevs.h"
56 * PC Card (PCMCIA) specific code.
58 static int fe_pccard_probe(device_t);
59 static int fe_pccard_attach(device_t);
60 static int fe_pccard_detach(device_t);
62 static const struct fe_pccard_product {
63 struct pccard_product mpp_product;
66 #define MPP_MBH10302 1
68 #define MPP_SKIP_TO_CFE 4
69 } fe_pccard_products[] = {
70 /* These need to be first */
71 { PCMCIA_CARD(FUJITSU2, FMV_J181), MPP_MBH10302 },
72 { PCMCIA_CARD(FUJITSU2, FMV_J182), 0 },
73 { PCMCIA_CARD(FUJITSU2, FMV_J182A), 0 },
74 { PCMCIA_CARD(FUJITSU2, ITCFJ182A), 0 },
75 /* These need to be second */
76 { PCMCIA_CARD(TDK, LAK_CD011), 0 },
77 { PCMCIA_CARD(TDK, LAK_CD021BX), 0 },
78 { PCMCIA_CARD(TDK, LAK_CF010), 0 },
79 #if 0 /* XXX 86960-based? */
80 { PCMCIA_CARD(TDK, LAK_DFL9610), 0 },
82 { PCMCIA_CARD(CONTEC, CNETPC), MPP_SKIP_TO_CFE, 2 },
83 { PCMCIA_CARD(FUJITSU, LA501), 0 },
84 { PCMCIA_CARD(FUJITSU, LA10S), 0 },
85 { PCMCIA_CARD(FUJITSU, NE200T), MPP_MBH10302 },/* Sold by Eagle */
86 { PCMCIA_CARD(HITACHI, HT_4840), MPP_MBH10302 | MPP_SKIP_TO_CFE, 10 },
87 { PCMCIA_CARD(RATOC, REX_R280), 0 },
88 { PCMCIA_CARD(XIRCOM, CE), MPP_ANYFUNC },
93 fe_pccard_probe(device_t dev)
96 uint32_t fcn = PCCARD_FUNCTION_UNSPEC;
97 const struct fe_pccard_product *pp;
100 if ((pp = (const struct fe_pccard_product *)pccard_product_lookup(dev,
101 (const struct pccard_product *)fe_pccard_products,
102 sizeof(fe_pccard_products[0]), NULL)) != NULL) {
103 if (pp->mpp_product.pp_name != NULL)
104 device_set_desc(dev, pp->mpp_product.pp_name);
105 if (pp->mpp_flags & MPP_ANYFUNC)
107 /* Make sure we're a network function */
108 error = pccard_get_function(dev, &fcn);
111 if (fcn != PCCARD_FUNCTION_NETWORK)
113 if (pp->mpp_flags & MPP_SKIP_TO_CFE) {
114 for (i = pp->mpp_cfe; i < 32; i++) {
115 if (pccard_select_cfe(dev, i) == 0)
119 "Failed to map CFE %d or higher\n", pp->mpp_cfe);
128 static device_method_t fe_pccard_methods[] = {
129 /* Device interface */
130 DEVMETHOD(device_probe, fe_pccard_probe),
131 DEVMETHOD(device_attach, fe_pccard_attach),
132 DEVMETHOD(device_detach, fe_pccard_detach),
137 static driver_t fe_pccard_driver = {
140 sizeof (struct fe_softc)
143 DRIVER_MODULE(fe, pccard, fe_pccard_driver, fe_devclass, 0, 0);
144 MODULE_DEPEND(fe, pccard, 1, 1, 1);
146 static int fe_probe_mbh(device_t, const struct fe_pccard_product *);
147 static int fe_probe_tdk(device_t, const struct fe_pccard_product *);
150 fe_pccard_attach(device_t dev)
153 const struct fe_pccard_product *pp;
156 /* Prepare for the device probe process. */
157 sc = device_get_softc(dev);
158 sc->sc_unit = device_get_unit(dev);
160 pp = (const struct fe_pccard_product *) pccard_product_lookup(dev,
161 (const struct pccard_product *)fe_pccard_products,
162 sizeof(fe_pccard_products[0]), NULL);
166 if (pp->mpp_flags & MPP_MBH10302)
167 error = fe_probe_mbh(dev, pp);
169 error = fe_probe_tdk(dev, pp);
171 fe_release_resource(dev);
174 error = fe_alloc_irq(dev, 0);
176 fe_release_resource(dev);
179 return (fe_attach(dev));
183 * feunload - unload the driver and clear the table.
186 fe_pccard_detach(device_t dev)
188 struct fe_softc *sc = device_get_softc(dev);
189 struct ifnet *ifp = sc->ifp;
194 callout_drain(&sc->timer);
196 bus_teardown_intr(dev, sc->irq_res, sc->irq_handle);
198 fe_release_resource(dev);
199 mtx_destroy(&sc->lock);
206 * Probe and initialization for Fujitsu MBH10302 PCMCIA Ethernet interface.
207 * Note that this is for 10302 only; MBH10304 is handled by fe_probe_tdk().
210 fe_init_mbh(struct fe_softc *sc)
212 /* Minimal initialization of 86960. */
214 fe_outb(sc, FE_DLCR6, sc->proto_dlcr6 | FE_D6_DLC_DISABLE);
217 /* Disable all interrupts. */
218 fe_outb(sc, FE_DLCR2, 0);
219 fe_outb(sc, FE_DLCR3, 0);
221 /* Enable master interrupt flag. */
222 fe_outb(sc, FE_MBH0, FE_MBH0_MAGIC | FE_MBH0_INTR_ENABLE);
226 fe_probe_mbh(device_t dev, const struct fe_pccard_product *pp)
228 struct fe_softc *sc = device_get_softc(dev);
230 static struct fe_simple_probe_struct probe_table [] = {
231 { FE_DLCR2, 0x58, 0x00 },
232 { FE_DLCR4, 0x08, 0x00 },
233 { FE_DLCR6, 0xFF, 0xB6 },
237 /* MBH10302 occupies 32 I/O addresses. */
238 if (fe_alloc_port(dev, 32))
241 /* Fill the softc struct with default values. */
242 fe_softc_defaults(sc);
245 * See if MBH10302 is on its address.
246 * I'm not sure the following probe code works. FIXME.
248 if (!fe_simple_probe(sc, probe_table))
251 /* Get our station address from EEPROM. */
252 fe_inblk(sc, FE_MBH10, sc->enaddr, ETHER_ADDR_LEN);
254 /* Make sure we got a valid station address. */
255 if (!fe_valid_Ether_p(sc->enaddr, 0))
258 /* Determine the card type. */
259 sc->type = FE_TYPE_MBH;
260 sc->typestr = "MBH10302 (PCMCIA)";
262 /* We seems to need our own IDENT bits... FIXME. */
263 sc->proto_dlcr7 = FE_D7_BYTSWP_LH | FE_D7_IDENT_NICE;
265 /* Setup hooks. We need a special initialization procedure. */
266 sc->init = fe_init_mbh;
272 fe_pccard_xircom_mac(const struct pccard_tuple *tuple, void *argp)
274 uint8_t *enaddr = argp;
279 * We fail to map the CIS twice, for reasons unknown. We
280 * may fix this in the future by loading the CIS with a sane
283 static uint8_t defaultmac[ETHER_ADDR_LEN] = {
284 0x00, 0x80, 0xc7, 0xed, 0x16, 0x7b};
286 /* Copy the MAC ADDR and return success */
287 for (i = 0; i < ETHER_ADDR_LEN; i++)
288 enaddr[i] = defaultmac[i];
290 /* FUNCE is not after FUNCID, so we gotta go find it */
291 if (tuple->code != 0x22)
294 /* Make sure this is a sane node */
295 if (tuple->length < ETHER_ADDR_LEN + 3)
298 /* Copy the MAC ADDR and return success */
299 for (i = 0; i < ETHER_ADDR_LEN; i++)
300 enaddr[i] = pccard_tuple_read_1(tuple, i + 3);
306 * Probe and initialization for TDK/CONTEC PCMCIA Ethernet interface.
307 * by MASUI Kenji <masui@cs.titech.ac.jp>
309 * (Contec uses TDK Ethernet chip -- hosokawa)
311 * This version of fe_probe_tdk has been rewrote to handle
312 * *generic* PC Card implementation of Fujitsu MB8696x family. The
313 * name _tdk is just for a historical reason. :-)
316 fe_probe_tdk (device_t dev, const struct fe_pccard_product *pp)
318 struct fe_softc *sc = device_get_softc(dev);
320 static struct fe_simple_probe_struct probe_table [] = {
321 { FE_DLCR2, 0x10, 0x00 },
322 { FE_DLCR4, 0x08, 0x00 },
323 /* { FE_DLCR5, 0x80, 0x00 }, Does not work well. */
328 /* C-NET(PC)C occupies 16 I/O addresses. */
329 if (fe_alloc_port(dev, 16))
332 /* Fill the softc struct with default values. */
333 fe_softc_defaults(sc);
336 * See if C-NET(PC)C is on its address.
338 if (!fe_simple_probe(sc, probe_table))
341 /* Determine the card type. */
342 sc->type = FE_TYPE_TDK;
343 sc->typestr = "Generic MB8696x/78Q837x Ethernet (PCMCIA)";
345 pccard_get_ether(dev, sc->enaddr);
347 /* Make sure we got a valid station address. */
348 if (!fe_valid_Ether_p(sc->enaddr, 0)) {
349 pccard_cis_scan(dev, fe_pccard_xircom_mac, sc->enaddr);
352 /* Make sure we got a valid station address. */
353 if (!fe_valid_Ether_p(sc->enaddr, 0))