2 * All Rights Reserved, Copyright (C) Fujitsu Limited 1995
4 * This software may be used, modified, copied, distributed, and sold, in
5 * both source and binary form provided that the above copyright, these
6 * terms and the following disclaimer are retained. The name of the author
7 * and/or the contributor may not be used to endorse or promote products
8 * derived from this software without specific prior written permission.
10 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND THE CONTRIBUTOR ``AS IS'' AND
11 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
12 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
13 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR THE CONTRIBUTOR BE LIABLE
14 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
15 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
16 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION.
17 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
18 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
19 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24 #include <sys/cdefs.h>
25 __FBSDID("$FreeBSD$");
27 #include <sys/param.h>
28 #include <sys/kernel.h>
29 #include <sys/socket.h>
30 #include <sys/systm.h>
32 #include <sys/module.h>
33 #include <sys/mutex.h>
36 #include <machine/bus.h>
39 #include <net/ethernet.h>
41 #include <net/if_var.h>
42 #include <net/if_mib.h>
43 #include <net/if_media.h>
45 #include <netinet/in.h>
46 #include <netinet/if_ether.h>
48 #include <dev/fe/mb86960.h>
49 #include <dev/fe/if_fereg.h>
50 #include <dev/fe/if_fevar.h>
52 #include <dev/pccard/pccardvar.h>
53 #include <dev/pccard/pccard_cis.h>
56 #include "pccarddevs.h"
59 * PC Card (PCMCIA) specific code.
61 static int fe_pccard_probe(device_t);
62 static int fe_pccard_attach(device_t);
63 static int fe_pccard_detach(device_t);
65 static const struct fe_pccard_product {
66 struct pccard_product mpp_product;
69 #define MPP_MBH10302 1
71 #define MPP_SKIP_TO_CFE 4
72 } fe_pccard_products[] = {
73 /* These need to be first */
74 { PCMCIA_CARD(FUJITSU2, FMV_J181), MPP_MBH10302 },
75 { PCMCIA_CARD(FUJITSU2, FMV_J182), 0 },
76 { PCMCIA_CARD(FUJITSU2, FMV_J182A), 0 },
77 { PCMCIA_CARD(FUJITSU2, ITCFJ182A), 0 },
78 /* These need to be second */
79 { PCMCIA_CARD(TDK, LAK_CD011), 0 },
80 { PCMCIA_CARD(TDK, LAK_CD021BX), 0 },
81 { PCMCIA_CARD(TDK, LAK_CF010), 0 },
82 #if 0 /* XXX 86960-based? */
83 { PCMCIA_CARD(TDK, LAK_DFL9610), 0 },
85 { PCMCIA_CARD(CONTEC, CNETPC), MPP_SKIP_TO_CFE, 2 },
86 { PCMCIA_CARD(FUJITSU, LA501), 0 },
87 { PCMCIA_CARD(FUJITSU, LA10S), 0 },
88 { PCMCIA_CARD(FUJITSU, NE200T), MPP_MBH10302 },/* Sold by Eagle */
89 { PCMCIA_CARD(HITACHI, HT_4840), MPP_MBH10302 | MPP_SKIP_TO_CFE, 10 },
90 { PCMCIA_CARD(RATOC, REX_R280), 0 },
91 { PCMCIA_CARD(XIRCOM, CE), MPP_ANYFUNC },
96 fe_pccard_probe(device_t dev)
99 uint32_t fcn = PCCARD_FUNCTION_UNSPEC;
100 const struct fe_pccard_product *pp;
103 if ((pp = (const struct fe_pccard_product *)pccard_product_lookup(dev,
104 (const struct pccard_product *)fe_pccard_products,
105 sizeof(fe_pccard_products[0]), NULL)) != NULL) {
106 if (pp->mpp_product.pp_name != NULL)
107 device_set_desc(dev, pp->mpp_product.pp_name);
108 if (pp->mpp_flags & MPP_ANYFUNC)
110 /* Make sure we're a network function */
111 error = pccard_get_function(dev, &fcn);
114 if (fcn != PCCARD_FUNCTION_NETWORK)
116 if (pp->mpp_flags & MPP_SKIP_TO_CFE) {
117 for (i = pp->mpp_cfe; i < 32; i++) {
118 if (pccard_select_cfe(dev, i) == 0)
122 "Failed to map CFE %d or higher\n", pp->mpp_cfe);
131 static device_method_t fe_pccard_methods[] = {
132 /* Device interface */
133 DEVMETHOD(device_probe, fe_pccard_probe),
134 DEVMETHOD(device_attach, fe_pccard_attach),
135 DEVMETHOD(device_detach, fe_pccard_detach),
140 static driver_t fe_pccard_driver = {
143 sizeof (struct fe_softc)
146 DRIVER_MODULE(fe, pccard, fe_pccard_driver, fe_devclass, 0, 0);
147 MODULE_DEPEND(fe, pccard, 1, 1, 1);
149 static int fe_probe_mbh(device_t, const struct fe_pccard_product *);
150 static int fe_probe_tdk(device_t, const struct fe_pccard_product *);
153 fe_pccard_attach(device_t dev)
156 const struct fe_pccard_product *pp;
159 /* Prepare for the device probe process. */
160 sc = device_get_softc(dev);
161 sc->sc_unit = device_get_unit(dev);
163 pp = (const struct fe_pccard_product *) pccard_product_lookup(dev,
164 (const struct pccard_product *)fe_pccard_products,
165 sizeof(fe_pccard_products[0]), NULL);
169 if (pp->mpp_flags & MPP_MBH10302)
170 error = fe_probe_mbh(dev, pp);
172 error = fe_probe_tdk(dev, pp);
174 fe_release_resource(dev);
177 error = fe_alloc_irq(dev, 0);
179 fe_release_resource(dev);
182 return (fe_attach(dev));
186 * feunload - unload the driver and clear the table.
189 fe_pccard_detach(device_t dev)
191 struct fe_softc *sc = device_get_softc(dev);
192 struct ifnet *ifp = sc->ifp;
197 callout_drain(&sc->timer);
199 bus_teardown_intr(dev, sc->irq_res, sc->irq_handle);
201 fe_release_resource(dev);
202 mtx_destroy(&sc->lock);
209 * Probe and initialization for Fujitsu MBH10302 PCMCIA Ethernet interface.
210 * Note that this is for 10302 only; MBH10304 is handled by fe_probe_tdk().
213 fe_init_mbh(struct fe_softc *sc)
215 /* Minimal initialization of 86960. */
217 fe_outb(sc, FE_DLCR6, sc->proto_dlcr6 | FE_D6_DLC_DISABLE);
220 /* Disable all interrupts. */
221 fe_outb(sc, FE_DLCR2, 0);
222 fe_outb(sc, FE_DLCR3, 0);
224 /* Enable master interrupt flag. */
225 fe_outb(sc, FE_MBH0, FE_MBH0_MAGIC | FE_MBH0_INTR_ENABLE);
229 fe_probe_mbh(device_t dev, const struct fe_pccard_product *pp)
231 struct fe_softc *sc = device_get_softc(dev);
233 static struct fe_simple_probe_struct probe_table [] = {
234 { FE_DLCR2, 0x58, 0x00 },
235 { FE_DLCR4, 0x08, 0x00 },
236 { FE_DLCR6, 0xFF, 0xB6 },
240 /* MBH10302 occupies 32 I/O addresses. */
241 if (fe_alloc_port(dev, 32))
244 /* Fill the softc struct with default values. */
245 fe_softc_defaults(sc);
248 * See if MBH10302 is on its address.
249 * I'm not sure the following probe code works. FIXME.
251 if (!fe_simple_probe(sc, probe_table))
254 /* Get our station address from EEPROM. */
255 fe_inblk(sc, FE_MBH10, sc->enaddr, ETHER_ADDR_LEN);
257 /* Make sure we got a valid station address. */
258 if (!fe_valid_Ether_p(sc->enaddr, 0))
261 /* Determine the card type. */
262 sc->type = FE_TYPE_MBH;
263 sc->typestr = "MBH10302 (PCMCIA)";
265 /* We seems to need our own IDENT bits... FIXME. */
266 sc->proto_dlcr7 = FE_D7_BYTSWP_LH | FE_D7_IDENT_NICE;
268 /* Setup hooks. We need a special initialization procedure. */
269 sc->init = fe_init_mbh;
275 fe_pccard_xircom_mac(const struct pccard_tuple *tuple, void *argp)
277 uint8_t *enaddr = argp;
282 * We fail to map the CIS twice, for reasons unknown. We
283 * may fix this in the future by loading the CIS with a sane
286 static uint8_t defaultmac[ETHER_ADDR_LEN] = {
287 0x00, 0x80, 0xc7, 0xed, 0x16, 0x7b};
289 /* Copy the MAC ADDR and return success */
290 for (i = 0; i < ETHER_ADDR_LEN; i++)
291 enaddr[i] = defaultmac[i];
293 /* FUNCE is not after FUNCID, so we gotta go find it */
294 if (tuple->code != 0x22)
297 /* Make sure this is a sane node */
298 if (tuple->length < ETHER_ADDR_LEN + 3)
301 /* Copy the MAC ADDR and return success */
302 for (i = 0; i < ETHER_ADDR_LEN; i++)
303 enaddr[i] = pccard_tuple_read_1(tuple, i + 3);
309 * Probe and initialization for TDK/CONTEC PCMCIA Ethernet interface.
310 * by MASUI Kenji <masui@cs.titech.ac.jp>
312 * (Contec uses TDK Ethernet chip -- hosokawa)
314 * This version of fe_probe_tdk has been rewrote to handle
315 * *generic* PC Card implementation of Fujitsu MB8696x family. The
316 * name _tdk is just for a historical reason. :-)
319 fe_probe_tdk (device_t dev, const struct fe_pccard_product *pp)
321 struct fe_softc *sc = device_get_softc(dev);
323 static struct fe_simple_probe_struct probe_table [] = {
324 { FE_DLCR2, 0x10, 0x00 },
325 { FE_DLCR4, 0x08, 0x00 },
326 /* { FE_DLCR5, 0x80, 0x00 }, Does not work well. */
331 /* C-NET(PC)C occupies 16 I/O addresses. */
332 if (fe_alloc_port(dev, 16))
335 /* Fill the softc struct with default values. */
336 fe_softc_defaults(sc);
339 * See if C-NET(PC)C is on its address.
341 if (!fe_simple_probe(sc, probe_table))
344 /* Determine the card type. */
345 sc->type = FE_TYPE_TDK;
346 sc->typestr = "Generic MB8696x/78Q837x Ethernet (PCMCIA)";
348 pccard_get_ether(dev, sc->enaddr);
350 /* Make sure we got a valid station address. */
351 if (!fe_valid_Ether_p(sc->enaddr, 0)) {
352 pccard_cis_scan(dev, fe_pccard_xircom_mac, sc->enaddr);
355 /* Make sure we got a valid station address. */
356 if (!fe_valid_Ether_p(sc->enaddr, 0))