2 * Copyright (c) 1995, David Greenman
3 * Copyright (c) 2001 Jonathan Lemon <jlemon@freebsd.org>
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
9 * 1. Redistributions of source code must retain the above copyright
10 * notice unmodified, this list of conditions, and the following
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32 * Intel EtherExpress Pro/100B PCI Fast Ethernet driver
35 #include <sys/param.h>
36 #include <sys/systm.h>
38 #include <sys/malloc.h>
39 /* #include <sys/mutex.h> */
40 #include <sys/kernel.h>
41 #include <sys/socket.h>
42 #include <sys/sysctl.h>
45 #include <net/if_dl.h>
46 #include <net/if_media.h>
50 #include <netns/ns_if.h>
54 #include <sys/sockio.h>
56 #include <machine/bus.h>
58 #include <machine/resource.h>
60 #include <net/ethernet.h>
61 #include <net/if_arp.h>
63 #include <vm/vm.h> /* for vtophys */
64 #include <vm/pmap.h> /* for vtophys */
65 #include <machine/clock.h> /* for DELAY */
67 #include <net/if_types.h>
68 #include <net/if_vlan_var.h>
70 #include <pci/pcivar.h>
71 #include <pci/pcireg.h> /* for PCIM_CMD_xxx */
73 #include <dev/mii/mii.h>
74 #include <dev/mii/miivar.h>
76 #include <dev/fxp/if_fxpreg.h>
77 #include <dev/fxp/if_fxpvar.h>
78 #include <dev/fxp/rcvbundl.h>
80 MODULE_DEPEND(fxp, miibus, 1, 1, 1);
81 #include "miibus_if.h"
84 * NOTE! On the Alpha, we have an alignment constraint. The
85 * card DMAs the packet immediately following the RFA. However,
86 * the first thing in the packet is a 14-byte Ethernet header.
87 * This means that the packet is misaligned. To compensate,
88 * we actually offset the RFA 2 bytes into the cluster. This
89 * alignes the packet after the Ethernet header at a 32-bit
90 * boundary. HOWEVER! This means that the RFA is misaligned!
92 #define RFA_ALIGNMENT_FUDGE 2
95 * Set initial transmit threshold at 64 (512 bytes). This is
96 * increased by 64 (512 bytes) at a time, to maximum of 192
97 * (1536 bytes), if an underrun occurs.
99 static int tx_threshold = 64;
102 * The configuration byte map has several undefined fields which
103 * must be one or must be zero. Set up a template for these bits
104 * only, (assuming a 82557 chip) leaving the actual configuration
107 * See struct fxp_cb_config for the bit definitions.
109 static u_char fxp_cb_config_template[] = {
110 0x0, 0x0, /* cb_status */
111 0x0, 0x0, /* cb_command */
112 0x0, 0x0, 0x0, 0x0, /* link_addr */
143 * Claim various Intel PCI device identifiers for this driver. The
144 * sub-vendor and sub-device field are extensively used to identify
145 * particular variants, but we don't currently differentiate between
148 static struct fxp_ident fxp_ident_table[] = {
149 { 0x1229, "Intel Pro 10/100B/100+ Ethernet" },
150 { 0x2449, "Intel Pro/100 Ethernet" },
151 { 0x1209, "Intel Embedded 10/100 Ethernet" },
152 { 0x1029, "Intel Pro/100 Ethernet" },
153 { 0x1030, "Intel Pro/100 Ethernet" },
154 { 0x1031, "Intel Pro/100 Ethernet" },
155 { 0x1032, "Intel Pro/100 Ethernet" },
156 { 0x1033, "Intel Pro/100 Ethernet" },
157 { 0x1034, "Intel Pro/100 Ethernet" },
158 { 0x1035, "Intel Pro/100 Ethernet" },
159 { 0x1036, "Intel Pro/100 Ethernet" },
160 { 0x1037, "Intel Pro/100 Ethernet" },
161 { 0x1038, "Intel Pro/100 Ethernet" },
162 { 0x1039, "Intel Pro/100 Ethernet" },
163 { 0x103A, "Intel Pro/100 Ethernet" },
164 { 0x103B, "Intel Pro/100 Ethernet" },
165 { 0x103C, "Intel Pro/100 Ethernet" },
166 { 0x103D, "Intel Pro/100 Ethernet" },
167 { 0x103E, "Intel Pro/100 Ethernet" },
171 static int fxp_probe(device_t dev);
172 static int fxp_attach(device_t dev);
173 static int fxp_detach(device_t dev);
174 static int fxp_shutdown(device_t dev);
175 static int fxp_suspend(device_t dev);
176 static int fxp_resume(device_t dev);
178 static void fxp_intr(void *xsc);
179 static void fxp_init(void *xsc);
180 static void fxp_tick(void *xsc);
181 static void fxp_powerstate_d0(device_t dev);
182 static void fxp_start(struct ifnet *ifp);
183 static void fxp_stop(struct fxp_softc *sc);
184 static void fxp_release(struct fxp_softc *sc);
185 static int fxp_ioctl(struct ifnet *ifp, u_long command,
187 static void fxp_watchdog(struct ifnet *ifp);
188 static int fxp_add_rfabuf(struct fxp_softc *sc, struct mbuf *oldm);
189 static int fxp_mc_addrs(struct fxp_softc *sc);
190 static void fxp_mc_setup(struct fxp_softc *sc);
191 static u_int16_t fxp_eeprom_getword(struct fxp_softc *sc, int offset,
193 static void fxp_eeprom_putword(struct fxp_softc *sc, int offset,
195 static void fxp_autosize_eeprom(struct fxp_softc *sc);
196 static void fxp_read_eeprom(struct fxp_softc *sc, u_short *data,
197 int offset, int words);
198 static void fxp_write_eeprom(struct fxp_softc *sc, u_short *data,
199 int offset, int words);
200 static int fxp_ifmedia_upd(struct ifnet *ifp);
201 static void fxp_ifmedia_sts(struct ifnet *ifp,
202 struct ifmediareq *ifmr);
203 static int fxp_serial_ifmedia_upd(struct ifnet *ifp);
204 static void fxp_serial_ifmedia_sts(struct ifnet *ifp,
205 struct ifmediareq *ifmr);
206 static volatile int fxp_miibus_readreg(device_t dev, int phy, int reg);
207 static void fxp_miibus_writereg(device_t dev, int phy, int reg,
209 static void fxp_load_ucode(struct fxp_softc *sc);
210 static int sysctl_int_range(SYSCTL_HANDLER_ARGS,
212 static int sysctl_hw_fxp_bundle_max(SYSCTL_HANDLER_ARGS);
213 static int sysctl_hw_fxp_int_delay(SYSCTL_HANDLER_ARGS);
214 static __inline void fxp_lwcopy(volatile u_int32_t *src,
215 volatile u_int32_t *dst);
216 static __inline void fxp_scb_wait(struct fxp_softc *sc);
217 static __inline void fxp_scb_cmd(struct fxp_softc *sc, int cmd);
218 static __inline void fxp_dma_wait(volatile u_int16_t *status,
219 struct fxp_softc *sc);
221 static device_method_t fxp_methods[] = {
222 /* Device interface */
223 DEVMETHOD(device_probe, fxp_probe),
224 DEVMETHOD(device_attach, fxp_attach),
225 DEVMETHOD(device_detach, fxp_detach),
226 DEVMETHOD(device_shutdown, fxp_shutdown),
227 DEVMETHOD(device_suspend, fxp_suspend),
228 DEVMETHOD(device_resume, fxp_resume),
231 DEVMETHOD(miibus_readreg, fxp_miibus_readreg),
232 DEVMETHOD(miibus_writereg, fxp_miibus_writereg),
237 static driver_t fxp_driver = {
240 sizeof(struct fxp_softc),
243 static devclass_t fxp_devclass;
245 DRIVER_MODULE(if_fxp, pci, fxp_driver, fxp_devclass, 0, 0);
246 DRIVER_MODULE(if_fxp, cardbus, fxp_driver, fxp_devclass, 0, 0);
247 DRIVER_MODULE(miibus, fxp, miibus_driver, miibus_devclass, 0, 0);
250 SYSCTL_INT(_hw, OID_AUTO, fxp_rnr, CTLFLAG_RW, &fxp_rnr, 0, "fxp rnr events");
253 * Inline function to copy a 16-bit aligned 32-bit quantity.
256 fxp_lwcopy(volatile u_int32_t *src, volatile u_int32_t *dst)
261 volatile u_int16_t *a = (volatile u_int16_t *)src;
262 volatile u_int16_t *b = (volatile u_int16_t *)dst;
270 * Wait for the previous command to be accepted (but not necessarily
274 fxp_scb_wait(struct fxp_softc *sc)
278 while (CSR_READ_1(sc, FXP_CSR_SCB_COMMAND) && --i)
281 device_printf(sc->dev, "SCB timeout: 0x%x 0x%x 0x%x 0x%x\n",
282 CSR_READ_1(sc, FXP_CSR_SCB_COMMAND),
283 CSR_READ_1(sc, FXP_CSR_SCB_STATACK),
284 CSR_READ_1(sc, FXP_CSR_SCB_RUSCUS),
285 CSR_READ_2(sc, FXP_CSR_FLOWCONTROL));
289 fxp_scb_cmd(struct fxp_softc *sc, int cmd)
292 if (cmd == FXP_SCB_COMMAND_CU_RESUME && sc->cu_resume_bug) {
293 CSR_WRITE_1(sc, FXP_CSR_SCB_COMMAND, FXP_CB_COMMAND_NOP);
296 CSR_WRITE_1(sc, FXP_CSR_SCB_COMMAND, cmd);
300 fxp_dma_wait(volatile u_int16_t *status, struct fxp_softc *sc)
304 while (!(*status & FXP_CB_STATUS_C) && --i)
307 device_printf(sc->dev, "DMA timeout\n");
311 * Return identification string if this is device is ours.
314 fxp_probe(device_t dev)
317 struct fxp_ident *ident;
319 if (pci_get_vendor(dev) == FXP_VENDORID_INTEL) {
320 devid = pci_get_device(dev);
321 for (ident = fxp_ident_table; ident->name != NULL; ident++) {
322 if (ident->devid == devid) {
323 device_set_desc(dev, ident->name);
332 fxp_powerstate_d0(device_t dev)
334 #if __FreeBSD_version >= 430002
335 u_int32_t iobase, membase, irq;
337 if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) {
338 /* Save important PCI config data. */
339 iobase = pci_read_config(dev, FXP_PCI_IOBA, 4);
340 membase = pci_read_config(dev, FXP_PCI_MMBA, 4);
341 irq = pci_read_config(dev, PCIR_INTLINE, 4);
343 /* Reset the power state. */
344 device_printf(dev, "chip is in D%d power mode "
345 "-- setting to D0\n", pci_get_powerstate(dev));
347 pci_set_powerstate(dev, PCI_POWERSTATE_D0);
349 /* Restore PCI config data. */
350 pci_write_config(dev, FXP_PCI_IOBA, iobase, 4);
351 pci_write_config(dev, FXP_PCI_MMBA, membase, 4);
352 pci_write_config(dev, PCIR_INTLINE, irq, 4);
358 fxp_attach(device_t dev)
361 struct fxp_softc *sc = device_get_softc(dev);
365 int i, rid, m1, m2, prefer_iomap;
368 bzero(sc, sizeof(*sc));
370 callout_handle_init(&sc->stat_ch);
371 sysctl_ctx_init(&sc->sysctl_ctx);
372 mtx_init(&sc->sc_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
373 MTX_DEF | MTX_RECURSE);
378 * Enable bus mastering. Enable memory space too, in case
379 * BIOS/Prom forgot about it.
381 val = pci_read_config(dev, PCIR_COMMAND, 2);
382 val |= (PCIM_CMD_MEMEN|PCIM_CMD_BUSMASTEREN);
383 pci_write_config(dev, PCIR_COMMAND, val, 2);
384 val = pci_read_config(dev, PCIR_COMMAND, 2);
386 fxp_powerstate_d0(dev);
389 * Figure out which we should try first - memory mapping or i/o mapping?
390 * We default to memory mapping. Then we accept an override from the
391 * command line. Then we check to see which one is enabled.
394 m2 = PCIM_CMD_PORTEN;
396 if (resource_int_value(device_get_name(dev), device_get_unit(dev),
397 "prefer_iomap", &prefer_iomap) == 0 && prefer_iomap != 0) {
398 m1 = PCIM_CMD_PORTEN;
404 (m1 == PCIM_CMD_MEMEN)? SYS_RES_MEMORY : SYS_RES_IOPORT;
405 sc->rgd = (m1 == PCIM_CMD_MEMEN)? FXP_PCI_MMBA : FXP_PCI_IOBA;
406 sc->mem = bus_alloc_resource(dev, sc->rtp, &sc->rgd,
407 0, ~0, 1, RF_ACTIVE);
409 if (sc->mem == NULL && (val & m2)) {
411 (m2 == PCIM_CMD_MEMEN)? SYS_RES_MEMORY : SYS_RES_IOPORT;
412 sc->rgd = (m2 == PCIM_CMD_MEMEN)? FXP_PCI_MMBA : FXP_PCI_IOBA;
413 sc->mem = bus_alloc_resource(dev, sc->rtp, &sc->rgd,
414 0, ~0, 1, RF_ACTIVE);
418 device_printf(dev, "could not map device registers\n");
423 device_printf(dev, "using %s space register mapping\n",
424 sc->rtp == SYS_RES_MEMORY? "memory" : "I/O");
427 sc->sc_st = rman_get_bustag(sc->mem);
428 sc->sc_sh = rman_get_bushandle(sc->mem);
431 * Allocate our interrupt.
434 sc->irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1,
435 RF_SHAREABLE | RF_ACTIVE);
436 if (sc->irq == NULL) {
437 device_printf(dev, "could not map interrupt\n");
442 error = bus_setup_intr(dev, sc->irq, INTR_TYPE_NET,
443 fxp_intr, sc, &sc->ih);
445 device_printf(dev, "could not setup irq\n");
450 * Reset to a stable state.
452 CSR_WRITE_4(sc, FXP_CSR_PORT, FXP_PORT_SELECTIVE_RESET);
455 sc->cbl_base = malloc(sizeof(struct fxp_cb_tx) * FXP_NTXCB,
456 M_DEVBUF, M_NOWAIT | M_ZERO);
457 if (sc->cbl_base == NULL)
460 sc->fxp_stats = malloc(sizeof(struct fxp_stats), M_DEVBUF,
462 if (sc->fxp_stats == NULL)
465 sc->mcsp = malloc(sizeof(struct fxp_cb_mcs), M_DEVBUF, M_NOWAIT);
466 if (sc->mcsp == NULL)
470 * Pre-allocate our receive buffers.
472 for (i = 0; i < FXP_NRFABUFS; i++) {
473 if (fxp_add_rfabuf(sc, NULL) != 0) {
479 * Find out how large of an SEEPROM we have.
481 fxp_autosize_eeprom(sc);
484 * Determine whether we must use the 503 serial interface.
486 fxp_read_eeprom(sc, &data, 6, 1);
487 if ((data & FXP_PHY_DEVICE_MASK) != 0 &&
488 (data & FXP_PHY_SERIAL_ONLY))
489 sc->flags |= FXP_FLAG_SERIAL_MEDIA;
492 * Create the sysctl tree
494 sc->sysctl_tree = SYSCTL_ADD_NODE(&sc->sysctl_ctx,
495 SYSCTL_STATIC_CHILDREN(_hw), OID_AUTO,
496 device_get_nameunit(dev), CTLFLAG_RD, 0, "");
497 if (sc->sysctl_tree == NULL)
499 SYSCTL_ADD_PROC(&sc->sysctl_ctx, SYSCTL_CHILDREN(sc->sysctl_tree),
500 OID_AUTO, "int_delay", CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_PRISON,
501 &sc->tunable_int_delay, 0, sysctl_hw_fxp_int_delay, "I",
502 "FXP driver receive interrupt microcode bundling delay");
503 SYSCTL_ADD_PROC(&sc->sysctl_ctx, SYSCTL_CHILDREN(sc->sysctl_tree),
504 OID_AUTO, "bundle_max", CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_PRISON,
505 &sc->tunable_bundle_max, 0, sysctl_hw_fxp_bundle_max, "I",
506 "FXP driver receive interrupt microcode bundle size limit");
509 * Pull in device tunables.
511 sc->tunable_int_delay = TUNABLE_INT_DELAY;
512 sc->tunable_bundle_max = TUNABLE_BUNDLE_MAX;
513 (void) resource_int_value(device_get_name(dev), device_get_unit(dev),
514 "int_delay", &sc->tunable_int_delay);
515 (void) resource_int_value(device_get_name(dev), device_get_unit(dev),
516 "bundle_max", &sc->tunable_bundle_max);
519 * Find out the chip revision; lump all 82557 revs together.
521 fxp_read_eeprom(sc, &data, 5, 1);
522 if ((data >> 8) == 1)
523 sc->revision = FXP_REV_82557;
525 sc->revision = pci_get_revid(dev);
528 * Enable workarounds for certain chip revision deficiencies.
530 * Systems based on the ICH2/ICH2-M chip from Intel, and possibly
531 * some systems based a normal 82559 design, have a defect where
532 * the chip can cause a PCI protocol violation if it receives
533 * a CU_RESUME command when it is entering the IDLE state. The
534 * workaround is to disable Dynamic Standby Mode, so the chip never
535 * deasserts CLKRUN#, and always remains in an active state.
537 * See Intel 82801BA/82801BAM Specification Update, Errata #30.
539 i = pci_get_device(dev);
540 if (i == 0x2449 || (i > 0x1030 && i < 0x1039) ||
541 sc->revision >= FXP_REV_82559_A0) {
542 fxp_read_eeprom(sc, &data, 10, 1);
543 if (data & 0x02) { /* STB enable */
548 "Disabling dynamic standby mode in EEPROM\n");
550 fxp_write_eeprom(sc, &data, 10, 1);
551 device_printf(dev, "New EEPROM ID: 0x%x\n", data);
553 for (i = 0; i < (1 << sc->eeprom_size) - 1; i++) {
554 fxp_read_eeprom(sc, &data, i, 1);
557 i = (1 << sc->eeprom_size) - 1;
558 cksum = 0xBABA - cksum;
559 fxp_read_eeprom(sc, &data, i, 1);
560 fxp_write_eeprom(sc, &cksum, i, 1);
562 "EEPROM checksum @ 0x%x: 0x%x -> 0x%x\n",
566 * If the user elects to continue, try the software
567 * workaround, as it is better than nothing.
569 sc->flags |= FXP_FLAG_CU_RESUME_BUG;
575 * If we are not a 82557 chip, we can enable extended features.
577 if (sc->revision != FXP_REV_82557) {
579 * If MWI is enabled in the PCI configuration, and there
580 * is a valid cacheline size (8 or 16 dwords), then tell
581 * the board to turn on MWI.
583 if (val & PCIM_CMD_MWRICEN &&
584 pci_read_config(dev, PCIR_CACHELNSZ, 1) != 0)
585 sc->flags |= FXP_FLAG_MWI_ENABLE;
587 /* turn on the extended TxCB feature */
588 sc->flags |= FXP_FLAG_EXT_TXCB;
590 /* enable reception of long frames for VLAN */
591 sc->flags |= FXP_FLAG_LONG_PKT_EN;
597 fxp_read_eeprom(sc, (u_int16_t *)sc->arpcom.ac_enaddr, 0, 3);
598 device_printf(dev, "Ethernet address %6D%s\n",
599 sc->arpcom.ac_enaddr, ":",
600 sc->flags & FXP_FLAG_SERIAL_MEDIA ? ", 10Mbps" : "");
602 device_printf(dev, "PCI IDs: %04x %04x %04x %04x %04x\n",
603 pci_get_vendor(dev), pci_get_device(dev),
604 pci_get_subvendor(dev), pci_get_subdevice(dev),
606 fxp_read_eeprom(sc, &data, 10, 1);
607 device_printf(dev, "Dynamic Standby mode is %s\n",
608 data & 0x02 ? "enabled" : "disabled");
612 * If this is only a 10Mbps device, then there is no MII, and
613 * the PHY will use a serial interface instead.
615 * The Seeq 80c24 AutoDUPLEX(tm) Ethernet Interface Adapter
616 * doesn't have a programming interface of any sort. The
617 * media is sensed automatically based on how the link partner
618 * is configured. This is, in essence, manual configuration.
620 if (sc->flags & FXP_FLAG_SERIAL_MEDIA) {
621 ifmedia_init(&sc->sc_media, 0, fxp_serial_ifmedia_upd,
622 fxp_serial_ifmedia_sts);
623 ifmedia_add(&sc->sc_media, IFM_ETHER|IFM_MANUAL, 0, NULL);
624 ifmedia_set(&sc->sc_media, IFM_ETHER|IFM_MANUAL);
626 if (mii_phy_probe(dev, &sc->miibus, fxp_ifmedia_upd,
628 device_printf(dev, "MII without any PHY!\n");
634 ifp = &sc->arpcom.ac_if;
635 ifp->if_unit = device_get_unit(dev);
636 ifp->if_name = "fxp";
637 ifp->if_output = ether_output;
638 ifp->if_baudrate = 100000000;
639 ifp->if_init = fxp_init;
641 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
642 ifp->if_ioctl = fxp_ioctl;
643 ifp->if_start = fxp_start;
644 ifp->if_watchdog = fxp_watchdog;
647 * Attach the interface.
649 ether_ifattach(ifp, sc->arpcom.ac_enaddr);
652 * Tell the upper layer(s) we support long frames.
654 ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header);
655 ifp->if_capabilities |= IFCAP_VLAN_MTU;
658 * Let the system queue as many packets as we have available
661 ifp->if_snd.ifq_maxlen = FXP_NTXCB - 1;
667 device_printf(dev, "Failed to malloc memory\n");
676 * release all resources
679 fxp_release(struct fxp_softc *sc)
682 bus_generic_detach(sc->dev);
684 device_delete_child(sc->dev, sc->miibus);
687 free(sc->cbl_base, M_DEVBUF);
689 free(sc->fxp_stats, M_DEVBUF);
691 free(sc->mcsp, M_DEVBUF);
693 m_freem(sc->rfa_headm);
696 bus_teardown_intr(sc->dev, sc->irq, sc->ih);
698 bus_release_resource(sc->dev, SYS_RES_IRQ, 0, sc->irq);
700 bus_release_resource(sc->dev, sc->rtp, sc->rgd, sc->mem);
702 sysctl_ctx_free(&sc->sysctl_ctx);
704 mtx_destroy(&sc->sc_mtx);
711 fxp_detach(device_t dev)
713 struct fxp_softc *sc = device_get_softc(dev);
716 /* disable interrupts */
717 CSR_WRITE_1(sc, FXP_CSR_SCB_INTRCNTL, FXP_SCB_INTR_DISABLE);
722 * Stop DMA and drop transmit queue.
727 * Close down routes etc.
729 ether_ifdetach(&sc->arpcom.ac_if);
732 * Free all media structures.
734 ifmedia_removeall(&sc->sc_media);
738 /* Release our allocated resources. */
745 * Device shutdown routine. Called at system shutdown after sync. The
746 * main purpose of this routine is to shut off receiver DMA so that
747 * kernel memory doesn't get clobbered during warmboot.
750 fxp_shutdown(device_t dev)
753 * Make sure that DMA is disabled prior to reboot. Not doing
754 * do could allow DMA to corrupt kernel memory during the
755 * reboot before the driver initializes.
757 fxp_stop((struct fxp_softc *) device_get_softc(dev));
762 * Device suspend routine. Stop the interface and save some PCI
763 * settings in case the BIOS doesn't restore them properly on
767 fxp_suspend(device_t dev)
769 struct fxp_softc *sc = device_get_softc(dev);
776 for (i = 0; i < 5; i++)
777 sc->saved_maps[i] = pci_read_config(dev, PCIR_MAPS + i * 4, 4);
778 sc->saved_biosaddr = pci_read_config(dev, PCIR_BIOS, 4);
779 sc->saved_intline = pci_read_config(dev, PCIR_INTLINE, 1);
780 sc->saved_cachelnsz = pci_read_config(dev, PCIR_CACHELNSZ, 1);
781 sc->saved_lattimer = pci_read_config(dev, PCIR_LATTIMER, 1);
790 * Device resume routine. Restore some PCI settings in case the BIOS
791 * doesn't, re-enable busmastering, and restart the interface if
795 fxp_resume(device_t dev)
797 struct fxp_softc *sc = device_get_softc(dev);
798 struct ifnet *ifp = &sc->sc_if;
799 u_int16_t pci_command;
804 fxp_powerstate_d0(dev);
806 /* better way to do this? */
807 for (i = 0; i < 5; i++)
808 pci_write_config(dev, PCIR_MAPS + i * 4, sc->saved_maps[i], 4);
809 pci_write_config(dev, PCIR_BIOS, sc->saved_biosaddr, 4);
810 pci_write_config(dev, PCIR_INTLINE, sc->saved_intline, 1);
811 pci_write_config(dev, PCIR_CACHELNSZ, sc->saved_cachelnsz, 1);
812 pci_write_config(dev, PCIR_LATTIMER, sc->saved_lattimer, 1);
814 /* reenable busmastering */
815 pci_command = pci_read_config(dev, PCIR_COMMAND, 2);
816 pci_command |= (PCIM_CMD_MEMEN|PCIM_CMD_BUSMASTEREN);
817 pci_write_config(dev, PCIR_COMMAND, pci_command, 2);
819 CSR_WRITE_4(sc, FXP_CSR_PORT, FXP_PORT_SELECTIVE_RESET);
822 /* reinitialize interface if necessary */
823 if (ifp->if_flags & IFF_UP)
833 fxp_eeprom_shiftin(struct fxp_softc *sc, int data, int length)
841 for (x = 1 << (length - 1); x; x >>= 1) {
843 reg = FXP_EEPROM_EECS | FXP_EEPROM_EEDI;
845 reg = FXP_EEPROM_EECS;
846 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg);
848 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg | FXP_EEPROM_EESK);
850 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg);
856 * Read from the serial EEPROM. Basically, you manually shift in
857 * the read opcode (one bit at a time) and then shift in the address,
858 * and then you shift out the data (all of this one bit at a time).
859 * The word size is 16 bits, so you have to provide the address for
860 * every 16 bits of data.
863 fxp_eeprom_getword(struct fxp_softc *sc, int offset, int autosize)
868 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS);
870 * Shift in read opcode.
872 fxp_eeprom_shiftin(sc, FXP_EEPROM_OPC_READ, 3);
877 for (x = 1 << (sc->eeprom_size - 1); x; x >>= 1) {
879 reg = FXP_EEPROM_EECS | FXP_EEPROM_EEDI;
881 reg = FXP_EEPROM_EECS;
882 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg);
884 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg | FXP_EEPROM_EESK);
886 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg);
888 reg = CSR_READ_2(sc, FXP_CSR_EEPROMCONTROL) & FXP_EEPROM_EEDO;
890 if (autosize && reg == 0) {
891 sc->eeprom_size = data;
899 reg = FXP_EEPROM_EECS;
900 for (x = 1 << 15; x; x >>= 1) {
901 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg | FXP_EEPROM_EESK);
903 if (CSR_READ_2(sc, FXP_CSR_EEPROMCONTROL) & FXP_EEPROM_EEDO)
905 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg);
908 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0);
915 fxp_eeprom_putword(struct fxp_softc *sc, int offset, u_int16_t data)
920 * Erase/write enable.
922 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS);
923 fxp_eeprom_shiftin(sc, 0x4, 3);
924 fxp_eeprom_shiftin(sc, 0x03 << (sc->eeprom_size - 2), sc->eeprom_size);
925 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0);
928 * Shift in write opcode, address, data.
930 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS);
931 fxp_eeprom_shiftin(sc, FXP_EEPROM_OPC_WRITE, 3);
932 fxp_eeprom_shiftin(sc, offset, sc->eeprom_size);
933 fxp_eeprom_shiftin(sc, data, 16);
934 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0);
937 * Wait for EEPROM to finish up.
939 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS);
941 for (i = 0; i < 1000; i++) {
942 if (CSR_READ_2(sc, FXP_CSR_EEPROMCONTROL) & FXP_EEPROM_EEDO)
946 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0);
949 * Erase/write disable.
951 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS);
952 fxp_eeprom_shiftin(sc, 0x4, 3);
953 fxp_eeprom_shiftin(sc, 0, sc->eeprom_size);
954 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0);
961 * Figure out EEPROM size.
963 * 559's can have either 64-word or 256-word EEPROMs, the 558
964 * datasheet only talks about 64-word EEPROMs, and the 557 datasheet
965 * talks about the existance of 16 to 256 word EEPROMs.
967 * The only known sizes are 64 and 256, where the 256 version is used
968 * by CardBus cards to store CIS information.
970 * The address is shifted in msb-to-lsb, and after the last
971 * address-bit the EEPROM is supposed to output a `dummy zero' bit,
972 * after which follows the actual data. We try to detect this zero, by
973 * probing the data-out bit in the EEPROM control register just after
974 * having shifted in a bit. If the bit is zero, we assume we've
975 * shifted enough address bits. The data-out should be tri-state,
976 * before this, which should translate to a logical one.
979 fxp_autosize_eeprom(struct fxp_softc *sc)
982 /* guess maximum size of 256 words */
986 (void) fxp_eeprom_getword(sc, 0, 1);
990 fxp_read_eeprom(struct fxp_softc *sc, u_short *data, int offset, int words)
994 for (i = 0; i < words; i++)
995 data[i] = fxp_eeprom_getword(sc, offset + i, 0);
999 fxp_write_eeprom(struct fxp_softc *sc, u_short *data, int offset, int words)
1003 for (i = 0; i < words; i++)
1004 fxp_eeprom_putword(sc, offset + i, data[i]);
1008 * Start packet transmission on the interface.
1011 fxp_start(struct ifnet *ifp)
1013 struct fxp_softc *sc = ifp->if_softc;
1014 struct fxp_cb_tx *txp;
1017 * See if we need to suspend xmit until the multicast filter
1018 * has been reprogrammed (which can only be done at the head
1019 * of the command chain).
1021 if (sc->need_mcsetup) {
1028 * We're finished if there is nothing more to add to the list or if
1029 * we're all filled up with buffers to transmit.
1030 * NOTE: One TxCB is reserved to guarantee that fxp_mc_setup() can add
1031 * a NOP command when needed.
1033 while (ifp->if_snd.ifq_head != NULL && sc->tx_queued < FXP_NTXCB - 1) {
1034 struct mbuf *m, *mb_head;
1038 * Grab a packet to transmit.
1040 IF_DEQUEUE(&ifp->if_snd, mb_head);
1043 * Get pointer to next available tx desc.
1045 txp = sc->cbl_last->next;
1048 * Go through each of the mbufs in the chain and initialize
1049 * the transmit buffer descriptors with the physical address
1050 * and size of the mbuf.
1053 for (m = mb_head, segment = 0; m != NULL; m = m->m_next) {
1054 if (m->m_len != 0) {
1055 if (segment == FXP_NTXSEG)
1057 txp->tbd[segment].tb_addr =
1058 vtophys(mtod(m, vm_offset_t));
1059 txp->tbd[segment].tb_size = m->m_len;
1067 * We ran out of segments. We have to recopy this
1068 * mbuf chain first. Bail out if we can't get the
1071 MGETHDR(mn, M_DONTWAIT, MT_DATA);
1076 if (mb_head->m_pkthdr.len > MHLEN) {
1077 MCLGET(mn, M_DONTWAIT);
1078 if ((mn->m_flags & M_EXT) == 0) {
1084 m_copydata(mb_head, 0, mb_head->m_pkthdr.len,
1086 mn->m_pkthdr.len = mn->m_len = mb_head->m_pkthdr.len;
1092 txp->tbd_number = segment;
1093 txp->mb_head = mb_head;
1095 if (sc->tx_queued != FXP_CXINT_THRESH - 1) {
1097 FXP_CB_COMMAND_XMIT | FXP_CB_COMMAND_SF |
1101 FXP_CB_COMMAND_XMIT | FXP_CB_COMMAND_SF |
1102 FXP_CB_COMMAND_S | FXP_CB_COMMAND_I;
1104 * Set a 5 second timer just in case we don't hear
1105 * from the card again.
1109 txp->tx_threshold = tx_threshold;
1112 * Advance the end of list forward.
1117 * On platforms which can't access memory in 16-bit
1118 * granularities, we must prevent the card from DMA'ing
1119 * up the status while we update the command field.
1120 * This could cause us to overwrite the completion status.
1122 atomic_clear_short(&sc->cbl_last->cb_command,
1125 sc->cbl_last->cb_command &= ~FXP_CB_COMMAND_S;
1126 #endif /*__alpha__*/
1130 * Advance the beginning of the list forward if there are
1131 * no other packets queued (when nothing is queued, cbl_first
1132 * sits on the last TxCB that was sent out).
1134 if (sc->tx_queued == 0)
1135 sc->cbl_first = txp;
1140 * Pass packet to bpf if there is a listener.
1142 BPF_MTAP(ifp, mb_head);
1146 * We're finished. If we added to the list, issue a RESUME to get DMA
1147 * going again if suspended.
1151 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_RESUME);
1155 static void fxp_intr_body(struct fxp_softc *sc, u_int8_t statack, int count);
1157 #ifdef DEVICE_POLLING
1158 static poll_handler_t fxp_poll;
1161 fxp_poll(struct ifnet *ifp, enum poll_cmd cmd, int count)
1163 struct fxp_softc *sc = ifp->if_softc;
1166 if (cmd == POLL_DEREGISTER) { /* final call, enable interrupts */
1167 CSR_WRITE_1(sc, FXP_CSR_SCB_INTRCNTL, 0);
1170 statack = FXP_SCB_STATACK_CXTNO | FXP_SCB_STATACK_CNA |
1172 if (cmd == POLL_AND_CHECK_STATUS) {
1175 tmp = CSR_READ_1(sc, FXP_CSR_SCB_STATACK);
1176 if (tmp == 0xff || tmp == 0)
1177 return; /* nothing to do */
1179 /* ack what we can */
1181 CSR_WRITE_1(sc, FXP_CSR_SCB_STATACK, tmp);
1184 fxp_intr_body(sc, statack, count);
1186 #endif /* DEVICE_POLLING */
1189 * Process interface interrupts.
1194 struct fxp_softc *sc = xsc;
1197 #ifdef DEVICE_POLLING
1198 struct ifnet *ifp = &sc->sc_if;
1200 if (ifp->if_flags & IFF_POLLING)
1202 if (ether_poll_register(fxp_poll, ifp)) {
1203 /* disable interrupts */
1204 CSR_WRITE_1(sc, FXP_CSR_SCB_INTRCNTL, FXP_SCB_INTR_DISABLE);
1205 fxp_poll(ifp, 0, 1);
1210 if (sc->suspended) {
1214 while ((statack = CSR_READ_1(sc, FXP_CSR_SCB_STATACK)) != 0) {
1216 * It should not be possible to have all bits set; the
1217 * FXP_SCB_INTR_SWI bit always returns 0 on a read. If
1218 * all bits are set, this may indicate that the card has
1219 * been physically ejected, so ignore it.
1221 if (statack == 0xff)
1225 * First ACK all the interrupts in this pass.
1227 CSR_WRITE_1(sc, FXP_CSR_SCB_STATACK, statack);
1228 fxp_intr_body(sc, statack, -1);
1233 fxp_intr_body(struct fxp_softc *sc, u_int8_t statack, int count)
1235 struct ifnet *ifp = &sc->sc_if;
1237 struct fxp_rfa *rfa;
1238 int rnr = (statack & FXP_SCB_STATACK_RNR) ? 1 : 0;
1242 #ifdef DEVICE_POLLING
1243 /* Pick up a deferred RNR condition if `count' ran out last time. */
1244 if (sc->flags & FXP_FLAG_DEFERRED_RNR) {
1245 sc->flags &= ~FXP_FLAG_DEFERRED_RNR;
1251 * Free any finished transmit mbuf chains.
1253 * Handle the CNA event likt a CXTNO event. It used to
1254 * be that this event (control unit not ready) was not
1255 * encountered, but it is now with the SMPng modifications.
1256 * The exact sequence of events that occur when the interface
1257 * is brought up are different now, and if this event
1258 * goes unhandled, the configuration/rxfilter setup sequence
1259 * can stall for several seconds. The result is that no
1260 * packets go out onto the wire for about 5 to 10 seconds
1261 * after the interface is ifconfig'ed for the first time.
1263 if (statack & (FXP_SCB_STATACK_CXTNO | FXP_SCB_STATACK_CNA)) {
1264 struct fxp_cb_tx *txp;
1266 for (txp = sc->cbl_first; sc->tx_queued &&
1267 (txp->cb_status & FXP_CB_STATUS_C) != 0;
1269 if (txp->mb_head != NULL) {
1270 m_freem(txp->mb_head);
1271 txp->mb_head = NULL;
1275 sc->cbl_first = txp;
1277 if (sc->tx_queued == 0) {
1278 if (sc->need_mcsetup)
1282 * Try to start more packets transmitting.
1284 if (ifp->if_snd.ifq_head != NULL)
1289 * Just return if nothing happened on the receive side.
1291 if (!rnr && (statack & FXP_SCB_STATACK_FR) == 0)
1295 * Process receiver interrupts. If a no-resource (RNR)
1296 * condition exists, get whatever packets we can and
1297 * re-start the receiver.
1299 * When using polling, we do not process the list to completion,
1300 * so when we get an RNR interrupt we must defer the restart
1301 * until we hit the last buffer with the C bit set.
1302 * If we run out of cycles and rfa_headm has the C bit set,
1303 * record the pending RNR in the FXP_FLAG_DEFERRED_RNR flag so
1304 * that the info will be used in the subsequent polling cycle.
1308 rfa = (struct fxp_rfa *)(m->m_ext.ext_buf +
1309 RFA_ALIGNMENT_FUDGE);
1311 #ifdef DEVICE_POLLING /* loop at most count times if count >=0 */
1312 if (count >= 0 && count-- == 0) {
1314 /* Defer RNR processing until the next time. */
1315 sc->flags |= FXP_FLAG_DEFERRED_RNR;
1320 #endif /* DEVICE_POLLING */
1322 if ( (rfa->rfa_status & FXP_RFA_STATUS_C) == 0)
1326 * Remove first packet from the chain.
1328 sc->rfa_headm = m->m_next;
1332 * Add a new buffer to the receive chain.
1333 * If this fails, the old buffer is recycled
1336 if (fxp_add_rfabuf(sc, m) == 0) {
1340 * Fetch packet length (the top 2 bits of
1341 * actual_size are flags set by the controller
1342 * upon completion), and drop the packet in case
1343 * of bogus length or CRC errors.
1345 total_len = rfa->actual_size & 0x3fff;
1346 if (total_len < sizeof(struct ether_header) ||
1347 total_len > MCLBYTES - RFA_ALIGNMENT_FUDGE -
1348 sizeof(struct fxp_rfa) ||
1349 rfa->rfa_status & FXP_RFA_STATUS_CRC) {
1354 m->m_pkthdr.len = m->m_len = total_len;
1355 m->m_pkthdr.rcvif = ifp;
1357 (*ifp->if_input)(ifp, m);
1362 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL,
1363 vtophys(sc->rfa_headm->m_ext.ext_buf) +
1364 RFA_ALIGNMENT_FUDGE);
1365 fxp_scb_cmd(sc, FXP_SCB_COMMAND_RU_START);
1370 * Update packet in/out/collision statistics. The i82557 doesn't
1371 * allow you to access these counters without doing a fairly
1372 * expensive DMA to get _all_ of the statistics it maintains, so
1373 * we do this operation here only once per second. The statistics
1374 * counters in the kernel are updated from the previous dump-stats
1375 * DMA and then a new dump-stats DMA is started. The on-chip
1376 * counters are zeroed when the DMA completes. If we can't start
1377 * the DMA immediately, we don't wait - we just prepare to read
1378 * them again next time.
1383 struct fxp_softc *sc = xsc;
1384 struct ifnet *ifp = &sc->sc_if;
1385 struct fxp_stats *sp = sc->fxp_stats;
1386 struct fxp_cb_tx *txp;
1389 ifp->if_opackets += sp->tx_good;
1390 ifp->if_collisions += sp->tx_total_collisions;
1392 ifp->if_ipackets += sp->rx_good;
1393 sc->rx_idle_secs = 0;
1396 * Receiver's been idle for another second.
1402 sp->rx_alignment_errors +
1404 sp->rx_overrun_errors;
1406 * If any transmit underruns occured, bump up the transmit
1407 * threshold by another 512 bytes (64 * 8).
1409 if (sp->tx_underruns) {
1410 ifp->if_oerrors += sp->tx_underruns;
1411 if (tx_threshold < 192)
1416 * Release any xmit buffers that have completed DMA. This isn't
1417 * strictly necessary to do here, but it's advantagous for mbufs
1418 * with external storage to be released in a timely manner rather
1419 * than being defered for a potentially long time. This limits
1420 * the delay to a maximum of one second.
1422 for (txp = sc->cbl_first; sc->tx_queued &&
1423 (txp->cb_status & FXP_CB_STATUS_C) != 0;
1425 if (txp->mb_head != NULL) {
1426 m_freem(txp->mb_head);
1427 txp->mb_head = NULL;
1431 sc->cbl_first = txp;
1433 * If we haven't received any packets in FXP_MAC_RX_IDLE seconds,
1434 * then assume the receiver has locked up and attempt to clear
1435 * the condition by reprogramming the multicast filter. This is
1436 * a work-around for a bug in the 82557 where the receiver locks
1437 * up if it gets certain types of garbage in the syncronization
1438 * bits prior to the packet header. This bug is supposed to only
1439 * occur in 10Mbps mode, but has been seen to occur in 100Mbps
1440 * mode as well (perhaps due to a 10/100 speed transition).
1442 if (sc->rx_idle_secs > FXP_MAX_RX_IDLE) {
1443 sc->rx_idle_secs = 0;
1447 * If there is no pending command, start another stats
1448 * dump. Otherwise punt for now.
1450 if (CSR_READ_1(sc, FXP_CSR_SCB_COMMAND) == 0) {
1452 * Start another stats dump.
1454 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_DUMPRESET);
1457 * A previous command is still waiting to be accepted.
1458 * Just zero our copy of the stats and wait for the
1459 * next timer event to update them.
1462 sp->tx_underruns = 0;
1463 sp->tx_total_collisions = 0;
1466 sp->rx_crc_errors = 0;
1467 sp->rx_alignment_errors = 0;
1468 sp->rx_rnr_errors = 0;
1469 sp->rx_overrun_errors = 0;
1471 if (sc->miibus != NULL)
1472 mii_tick(device_get_softc(sc->miibus));
1475 * Schedule another timeout one second from now.
1477 sc->stat_ch = timeout(fxp_tick, sc, hz);
1481 * Stop the interface. Cancels the statistics updater and resets
1485 fxp_stop(struct fxp_softc *sc)
1487 struct ifnet *ifp = &sc->sc_if;
1488 struct fxp_cb_tx *txp;
1491 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
1494 #ifdef DEVICE_POLLING
1495 ether_poll_deregister(ifp);
1498 * Cancel stats updater.
1500 untimeout(fxp_tick, sc, sc->stat_ch);
1503 * Issue software reset, which also unloads the microcode.
1505 sc->flags &= ~FXP_FLAG_UCODE;
1506 CSR_WRITE_4(sc, FXP_CSR_PORT, FXP_PORT_SOFTWARE_RESET);
1510 * Release any xmit buffers.
1514 for (i = 0; i < FXP_NTXCB; i++) {
1515 if (txp[i].mb_head != NULL) {
1516 m_freem(txp[i].mb_head);
1517 txp[i].mb_head = NULL;
1524 * Free all the receive buffers then reallocate/reinitialize
1526 if (sc->rfa_headm != NULL)
1527 m_freem(sc->rfa_headm);
1528 sc->rfa_headm = NULL;
1529 sc->rfa_tailm = NULL;
1530 for (i = 0; i < FXP_NRFABUFS; i++) {
1531 if (fxp_add_rfabuf(sc, NULL) != 0) {
1533 * This "can't happen" - we're at splimp()
1534 * and we just freed all the buffers we need
1537 panic("fxp_stop: no buffers!");
1543 * Watchdog/transmission transmit timeout handler. Called when a
1544 * transmission is started on the interface, but no interrupt is
1545 * received before the timeout. This usually indicates that the
1546 * card has wedged for some reason.
1549 fxp_watchdog(struct ifnet *ifp)
1551 struct fxp_softc *sc = ifp->if_softc;
1553 device_printf(sc->dev, "device timeout\n");
1562 struct fxp_softc *sc = xsc;
1563 struct ifnet *ifp = &sc->sc_if;
1564 struct fxp_cb_config *cbp;
1565 struct fxp_cb_ias *cb_ias;
1566 struct fxp_cb_tx *txp;
1567 struct fxp_cb_mcs *mcsp;
1572 * Cancel any pending I/O
1576 prm = (ifp->if_flags & IFF_PROMISC) ? 1 : 0;
1579 * Initialize base of CBL and RFA memory. Loading with zero
1580 * sets it up for regular linear addressing.
1582 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, 0);
1583 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_BASE);
1586 fxp_scb_cmd(sc, FXP_SCB_COMMAND_RU_BASE);
1589 * Initialize base of dump-stats buffer.
1592 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, vtophys(sc->fxp_stats));
1593 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_DUMP_ADR);
1596 * Attempt to load microcode if requested.
1598 if (ifp->if_flags & IFF_LINK0 && (sc->flags & FXP_FLAG_UCODE) == 0)
1602 * Initialize the multicast address list.
1604 if (fxp_mc_addrs(sc)) {
1606 mcsp->cb_status = 0;
1607 mcsp->cb_command = FXP_CB_COMMAND_MCAS | FXP_CB_COMMAND_EL;
1608 mcsp->link_addr = -1;
1610 * Start the multicast setup command.
1613 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, vtophys(&mcsp->cb_status));
1614 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START);
1615 /* ...and wait for it to complete. */
1616 fxp_dma_wait(&mcsp->cb_status, sc);
1620 * We temporarily use memory that contains the TxCB list to
1621 * construct the config CB. The TxCB list memory is rebuilt
1624 cbp = (struct fxp_cb_config *) sc->cbl_base;
1627 * This bcopy is kind of disgusting, but there are a bunch of must be
1628 * zero and must be one bits in this structure and this is the easiest
1629 * way to initialize them all to proper values.
1631 bcopy(fxp_cb_config_template,
1632 (void *)(uintptr_t)(volatile void *)&cbp->cb_status,
1633 sizeof(fxp_cb_config_template));
1636 cbp->cb_command = FXP_CB_COMMAND_CONFIG | FXP_CB_COMMAND_EL;
1637 cbp->link_addr = -1; /* (no) next command */
1638 cbp->byte_count = 22; /* (22) bytes to config */
1639 cbp->rx_fifo_limit = 8; /* rx fifo threshold (32 bytes) */
1640 cbp->tx_fifo_limit = 0; /* tx fifo threshold (0 bytes) */
1641 cbp->adaptive_ifs = 0; /* (no) adaptive interframe spacing */
1642 cbp->mwi_enable = sc->flags & FXP_FLAG_MWI_ENABLE ? 1 : 0;
1643 cbp->type_enable = 0; /* actually reserved */
1644 cbp->read_align_en = sc->flags & FXP_FLAG_READ_ALIGN ? 1 : 0;
1645 cbp->end_wr_on_cl = sc->flags & FXP_FLAG_WRITE_ALIGN ? 1 : 0;
1646 cbp->rx_dma_bytecount = 0; /* (no) rx DMA max */
1647 cbp->tx_dma_bytecount = 0; /* (no) tx DMA max */
1648 cbp->dma_mbce = 0; /* (disable) dma max counters */
1649 cbp->late_scb = 0; /* (don't) defer SCB update */
1650 cbp->direct_dma_dis = 1; /* disable direct rcv dma mode */
1651 cbp->tno_int_or_tco_en =0; /* (disable) tx not okay interrupt */
1652 cbp->ci_int = 1; /* interrupt on CU idle */
1653 cbp->ext_txcb_dis = sc->flags & FXP_FLAG_EXT_TXCB ? 0 : 1;
1654 cbp->ext_stats_dis = 1; /* disable extended counters */
1655 cbp->keep_overrun_rx = 0; /* don't pass overrun frames to host */
1656 cbp->save_bf = sc->revision == FXP_REV_82557 ? 1 : prm;
1657 cbp->disc_short_rx = !prm; /* discard short packets */
1658 cbp->underrun_retry = 1; /* retry mode (once) on DMA underrun */
1659 cbp->two_frames = 0; /* do not limit FIFO to 2 frames */
1660 cbp->dyn_tbd = 0; /* (no) dynamic TBD mode */
1661 cbp->mediatype = sc->flags & FXP_FLAG_SERIAL_MEDIA ? 0 : 1;
1662 cbp->csma_dis = 0; /* (don't) disable link */
1663 cbp->tcp_udp_cksum = 0; /* (don't) enable checksum */
1664 cbp->vlan_tco = 0; /* (don't) enable vlan wakeup */
1665 cbp->link_wake_en = 0; /* (don't) assert PME# on link change */
1666 cbp->arp_wake_en = 0; /* (don't) assert PME# on arp */
1667 cbp->mc_wake_en = 0; /* (don't) enable PME# on mcmatch */
1668 cbp->nsai = 1; /* (don't) disable source addr insert */
1669 cbp->preamble_length = 2; /* (7 byte) preamble */
1670 cbp->loopback = 0; /* (don't) loopback */
1671 cbp->linear_priority = 0; /* (normal CSMA/CD operation) */
1672 cbp->linear_pri_mode = 0; /* (wait after xmit only) */
1673 cbp->interfrm_spacing = 6; /* (96 bits of) interframe spacing */
1674 cbp->promiscuous = prm; /* promiscuous mode */
1675 cbp->bcast_disable = 0; /* (don't) disable broadcasts */
1676 cbp->wait_after_win = 0; /* (don't) enable modified backoff alg*/
1677 cbp->ignore_ul = 0; /* consider U/L bit in IA matching */
1678 cbp->crc16_en = 0; /* (don't) enable crc-16 algorithm */
1679 cbp->crscdt = sc->flags & FXP_FLAG_SERIAL_MEDIA ? 1 : 0;
1681 cbp->stripping = !prm; /* truncate rx packet to byte count */
1682 cbp->padding = 1; /* (do) pad short tx packets */
1683 cbp->rcv_crc_xfer = 0; /* (don't) xfer CRC to host */
1684 cbp->long_rx_en = sc->flags & FXP_FLAG_LONG_PKT_EN ? 1 : 0;
1685 cbp->ia_wake_en = 0; /* (don't) wake up on address match */
1686 cbp->magic_pkt_dis = 0; /* (don't) disable magic packet */
1687 /* must set wake_en in PMCSR also */
1688 cbp->force_fdx = 0; /* (don't) force full duplex */
1689 cbp->fdx_pin_en = 1; /* (enable) FDX# pin */
1690 cbp->multi_ia = 0; /* (don't) accept multiple IAs */
1691 cbp->mc_all = sc->flags & FXP_FLAG_ALL_MCAST ? 1 : 0;
1693 if (sc->revision == FXP_REV_82557) {
1695 * The 82557 has no hardware flow control, the values
1696 * below are the defaults for the chip.
1698 cbp->fc_delay_lsb = 0;
1699 cbp->fc_delay_msb = 0x40;
1700 cbp->pri_fc_thresh = 3;
1702 cbp->rx_fc_restop = 0;
1703 cbp->rx_fc_restart = 0;
1705 cbp->pri_fc_loc = 1;
1707 cbp->fc_delay_lsb = 0x1f;
1708 cbp->fc_delay_msb = 0x01;
1709 cbp->pri_fc_thresh = 3;
1710 cbp->tx_fc_dis = 0; /* enable transmit FC */
1711 cbp->rx_fc_restop = 1; /* enable FC restop frames */
1712 cbp->rx_fc_restart = 1; /* enable FC restart frames */
1713 cbp->fc_filter = !prm; /* drop FC frames to host */
1714 cbp->pri_fc_loc = 1; /* FC pri location (byte31) */
1718 * Start the config command/DMA.
1721 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, vtophys(&cbp->cb_status));
1722 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START);
1723 /* ...and wait for it to complete. */
1724 fxp_dma_wait(&cbp->cb_status, sc);
1727 * Now initialize the station address. Temporarily use the TxCB
1728 * memory area like we did above for the config CB.
1730 cb_ias = (struct fxp_cb_ias *) sc->cbl_base;
1731 cb_ias->cb_status = 0;
1732 cb_ias->cb_command = FXP_CB_COMMAND_IAS | FXP_CB_COMMAND_EL;
1733 cb_ias->link_addr = -1;
1734 bcopy(sc->arpcom.ac_enaddr,
1735 (void *)(uintptr_t)(volatile void *)cb_ias->macaddr,
1736 sizeof(sc->arpcom.ac_enaddr));
1739 * Start the IAS (Individual Address Setup) command/DMA.
1742 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START);
1743 /* ...and wait for it to complete. */
1744 fxp_dma_wait(&cb_ias->cb_status, sc);
1747 * Initialize transmit control block (TxCB) list.
1751 bzero(txp, sizeof(struct fxp_cb_tx) * FXP_NTXCB);
1752 for (i = 0; i < FXP_NTXCB; i++) {
1753 txp[i].cb_status = FXP_CB_STATUS_C | FXP_CB_STATUS_OK;
1754 txp[i].cb_command = FXP_CB_COMMAND_NOP;
1756 vtophys(&txp[(i + 1) & FXP_TXCB_MASK].cb_status);
1757 if (sc->flags & FXP_FLAG_EXT_TXCB)
1758 txp[i].tbd_array_addr = vtophys(&txp[i].tbd[2]);
1760 txp[i].tbd_array_addr = vtophys(&txp[i].tbd[0]);
1761 txp[i].next = &txp[(i + 1) & FXP_TXCB_MASK];
1764 * Set the suspend flag on the first TxCB and start the control
1765 * unit. It will execute the NOP and then suspend.
1767 txp->cb_command = FXP_CB_COMMAND_NOP | FXP_CB_COMMAND_S;
1768 sc->cbl_first = sc->cbl_last = txp;
1772 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START);
1775 * Initialize receiver buffer area - RFA.
1778 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL,
1779 vtophys(sc->rfa_headm->m_ext.ext_buf) + RFA_ALIGNMENT_FUDGE);
1780 fxp_scb_cmd(sc, FXP_SCB_COMMAND_RU_START);
1783 * Set current media.
1785 if (sc->miibus != NULL)
1786 mii_mediachg(device_get_softc(sc->miibus));
1788 ifp->if_flags |= IFF_RUNNING;
1789 ifp->if_flags &= ~IFF_OACTIVE;
1792 * Enable interrupts.
1794 #ifdef DEVICE_POLLING
1796 * ... but only do that if we are not polling. And because (presumably)
1797 * the default is interrupts on, we need to disable them explicitly!
1799 if ( ifp->if_flags & IFF_POLLING )
1800 CSR_WRITE_1(sc, FXP_CSR_SCB_INTRCNTL, FXP_SCB_INTR_DISABLE);
1802 #endif /* DEVICE_POLLING */
1803 CSR_WRITE_1(sc, FXP_CSR_SCB_INTRCNTL, 0);
1807 * Start stats updater.
1809 sc->stat_ch = timeout(fxp_tick, sc, hz);
1813 fxp_serial_ifmedia_upd(struct ifnet *ifp)
1820 fxp_serial_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
1823 ifmr->ifm_active = IFM_ETHER|IFM_MANUAL;
1827 * Change media according to request.
1830 fxp_ifmedia_upd(struct ifnet *ifp)
1832 struct fxp_softc *sc = ifp->if_softc;
1833 struct mii_data *mii;
1835 mii = device_get_softc(sc->miibus);
1841 * Notify the world which media we're using.
1844 fxp_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
1846 struct fxp_softc *sc = ifp->if_softc;
1847 struct mii_data *mii;
1849 mii = device_get_softc(sc->miibus);
1851 ifmr->ifm_active = mii->mii_media_active;
1852 ifmr->ifm_status = mii->mii_media_status;
1854 if (ifmr->ifm_status & IFM_10_T && sc->flags & FXP_FLAG_CU_RESUME_BUG)
1855 sc->cu_resume_bug = 1;
1857 sc->cu_resume_bug = 0;
1861 * Add a buffer to the end of the RFA buffer list.
1862 * Return 0 if successful, 1 for failure. A failure results in
1863 * adding the 'oldm' (if non-NULL) on to the end of the list -
1864 * tossing out its old contents and recycling it.
1865 * The RFA struct is stuck at the beginning of mbuf cluster and the
1866 * data pointer is fixed up to point just past it.
1869 fxp_add_rfabuf(struct fxp_softc *sc, struct mbuf *oldm)
1873 struct fxp_rfa *rfa, *p_rfa;
1875 m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
1876 if (m == NULL) { /* try to recycle the old mbuf instead */
1880 m->m_data = m->m_ext.ext_buf;
1884 * Move the data pointer up so that the incoming data packet
1885 * will be 32-bit aligned.
1887 m->m_data += RFA_ALIGNMENT_FUDGE;
1890 * Get a pointer to the base of the mbuf cluster and move
1891 * data start past it.
1893 rfa = mtod(m, struct fxp_rfa *);
1894 m->m_data += sizeof(struct fxp_rfa);
1895 rfa->size = (u_int16_t)(MCLBYTES - sizeof(struct fxp_rfa) - RFA_ALIGNMENT_FUDGE);
1898 * Initialize the rest of the RFA. Note that since the RFA
1899 * is misaligned, we cannot store values directly. Instead,
1900 * we use an optimized, inline copy.
1903 rfa->rfa_status = 0;
1904 rfa->rfa_control = FXP_RFA_CONTROL_EL;
1905 rfa->actual_size = 0;
1908 fxp_lwcopy(&v, (volatile u_int32_t *) rfa->link_addr);
1909 fxp_lwcopy(&v, (volatile u_int32_t *) rfa->rbd_addr);
1912 * If there are other buffers already on the list, attach this
1913 * one to the end by fixing up the tail to point to this one.
1915 if (sc->rfa_headm != NULL) {
1916 p_rfa = (struct fxp_rfa *) (sc->rfa_tailm->m_ext.ext_buf +
1917 RFA_ALIGNMENT_FUDGE);
1918 sc->rfa_tailm->m_next = m;
1920 fxp_lwcopy(&v, (volatile u_int32_t *) p_rfa->link_addr);
1921 p_rfa->rfa_control = 0;
1931 fxp_miibus_readreg(device_t dev, int phy, int reg)
1933 struct fxp_softc *sc = device_get_softc(dev);
1937 CSR_WRITE_4(sc, FXP_CSR_MDICONTROL,
1938 (FXP_MDI_READ << 26) | (reg << 16) | (phy << 21));
1940 while (((value = CSR_READ_4(sc, FXP_CSR_MDICONTROL)) & 0x10000000) == 0
1945 device_printf(dev, "fxp_miibus_readreg: timed out\n");
1947 return (value & 0xffff);
1951 fxp_miibus_writereg(device_t dev, int phy, int reg, int value)
1953 struct fxp_softc *sc = device_get_softc(dev);
1956 CSR_WRITE_4(sc, FXP_CSR_MDICONTROL,
1957 (FXP_MDI_WRITE << 26) | (reg << 16) | (phy << 21) |
1960 while ((CSR_READ_4(sc, FXP_CSR_MDICONTROL) & 0x10000000) == 0 &&
1965 device_printf(dev, "fxp_miibus_writereg: timed out\n");
1969 fxp_ioctl(struct ifnet *ifp, u_long command, caddr_t data)
1971 struct fxp_softc *sc = ifp->if_softc;
1972 struct ifreq *ifr = (struct ifreq *)data;
1973 struct mii_data *mii;
1980 if (ifp->if_flags & IFF_ALLMULTI)
1981 sc->flags |= FXP_FLAG_ALL_MCAST;
1983 sc->flags &= ~FXP_FLAG_ALL_MCAST;
1986 * If interface is marked up and not running, then start it.
1987 * If it is marked down and running, stop it.
1988 * XXX If it's up then re-initialize it. This is so flags
1989 * such as IFF_PROMISC are handled.
1991 if (ifp->if_flags & IFF_UP) {
1994 if (ifp->if_flags & IFF_RUNNING)
2001 if (ifp->if_flags & IFF_ALLMULTI)
2002 sc->flags |= FXP_FLAG_ALL_MCAST;
2004 sc->flags &= ~FXP_FLAG_ALL_MCAST;
2006 * Multicast list has changed; set the hardware filter
2009 if ((sc->flags & FXP_FLAG_ALL_MCAST) == 0)
2012 * fxp_mc_setup() can set FXP_FLAG_ALL_MCAST, so check it
2013 * again rather than else {}.
2015 if (sc->flags & FXP_FLAG_ALL_MCAST)
2022 if (sc->miibus != NULL) {
2023 mii = device_get_softc(sc->miibus);
2024 error = ifmedia_ioctl(ifp, ifr,
2025 &mii->mii_media, command);
2027 error = ifmedia_ioctl(ifp, ifr, &sc->sc_media, command);
2032 error = ether_ioctl(ifp, command, data);
2039 * Fill in the multicast address list and return number of entries.
2042 fxp_mc_addrs(struct fxp_softc *sc)
2044 struct fxp_cb_mcs *mcsp = sc->mcsp;
2045 struct ifnet *ifp = &sc->sc_if;
2046 struct ifmultiaddr *ifma;
2050 if ((sc->flags & FXP_FLAG_ALL_MCAST) == 0) {
2051 #if __FreeBSD_version < 500000
2052 LIST_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
2054 TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
2056 if (ifma->ifma_addr->sa_family != AF_LINK)
2058 if (nmcasts >= MAXMCADDR) {
2059 sc->flags |= FXP_FLAG_ALL_MCAST;
2063 bcopy(LLADDR((struct sockaddr_dl *)ifma->ifma_addr),
2064 (void *)(uintptr_t)(volatile void *)
2065 &sc->mcsp->mc_addr[nmcasts][0], 6);
2069 mcsp->mc_cnt = nmcasts * 6;
2074 * Program the multicast filter.
2076 * We have an artificial restriction that the multicast setup command
2077 * must be the first command in the chain, so we take steps to ensure
2078 * this. By requiring this, it allows us to keep up the performance of
2079 * the pre-initialized command ring (esp. link pointers) by not actually
2080 * inserting the mcsetup command in the ring - i.e. its link pointer
2081 * points to the TxCB ring, but the mcsetup descriptor itself is not part
2082 * of it. We then can do 'CU_START' on the mcsetup descriptor and have it
2083 * lead into the regular TxCB ring when it completes.
2085 * This function must be called at splimp.
2088 fxp_mc_setup(struct fxp_softc *sc)
2090 struct fxp_cb_mcs *mcsp = sc->mcsp;
2091 struct ifnet *ifp = &sc->sc_if;
2095 * If there are queued commands, we must wait until they are all
2096 * completed. If we are already waiting, then add a NOP command
2097 * with interrupt option so that we're notified when all commands
2098 * have been completed - fxp_start() ensures that no additional
2099 * TX commands will be added when need_mcsetup is true.
2101 if (sc->tx_queued) {
2102 struct fxp_cb_tx *txp;
2105 * need_mcsetup will be true if we are already waiting for the
2106 * NOP command to be completed (see below). In this case, bail.
2108 if (sc->need_mcsetup)
2110 sc->need_mcsetup = 1;
2113 * Add a NOP command with interrupt so that we are notified
2114 * when all TX commands have been processed.
2116 txp = sc->cbl_last->next;
2117 txp->mb_head = NULL;
2119 txp->cb_command = FXP_CB_COMMAND_NOP |
2120 FXP_CB_COMMAND_S | FXP_CB_COMMAND_I;
2122 * Advance the end of list forward.
2124 sc->cbl_last->cb_command &= ~FXP_CB_COMMAND_S;
2128 * Issue a resume in case the CU has just suspended.
2131 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_RESUME);
2133 * Set a 5 second timer just in case we don't hear from the
2140 sc->need_mcsetup = 0;
2143 * Initialize multicast setup descriptor.
2145 mcsp->next = sc->cbl_base;
2146 mcsp->mb_head = NULL;
2147 mcsp->cb_status = 0;
2148 mcsp->cb_command = FXP_CB_COMMAND_MCAS |
2149 FXP_CB_COMMAND_S | FXP_CB_COMMAND_I;
2150 mcsp->link_addr = vtophys(&sc->cbl_base->cb_status);
2151 (void) fxp_mc_addrs(sc);
2152 sc->cbl_first = sc->cbl_last = (struct fxp_cb_tx *) mcsp;
2156 * Wait until command unit is not active. This should never
2157 * be the case when nothing is queued, but make sure anyway.
2160 while ((CSR_READ_1(sc, FXP_CSR_SCB_RUSCUS) >> 6) ==
2161 FXP_SCB_CUS_ACTIVE && --count)
2164 device_printf(sc->dev, "command queue timeout\n");
2169 * Start the multicast setup command.
2172 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, vtophys(&mcsp->cb_status));
2173 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START);
2179 static u_int32_t fxp_ucode_d101a[] = D101_A_RCVBUNDLE_UCODE;
2180 static u_int32_t fxp_ucode_d101b0[] = D101_B0_RCVBUNDLE_UCODE;
2181 static u_int32_t fxp_ucode_d101ma[] = D101M_B_RCVBUNDLE_UCODE;
2182 static u_int32_t fxp_ucode_d101s[] = D101S_RCVBUNDLE_UCODE;
2183 static u_int32_t fxp_ucode_d102[] = D102_B_RCVBUNDLE_UCODE;
2184 static u_int32_t fxp_ucode_d102c[] = D102_C_RCVBUNDLE_UCODE;
2186 #define UCODE(x) x, sizeof(x)
2192 u_short int_delay_offset;
2193 u_short bundle_max_offset;
2195 { FXP_REV_82558_A4, UCODE(fxp_ucode_d101a), D101_CPUSAVER_DWORD, 0 },
2196 { FXP_REV_82558_B0, UCODE(fxp_ucode_d101b0), D101_CPUSAVER_DWORD, 0 },
2197 { FXP_REV_82559_A0, UCODE(fxp_ucode_d101ma),
2198 D101M_CPUSAVER_DWORD, D101M_CPUSAVER_BUNDLE_MAX_DWORD },
2199 { FXP_REV_82559S_A, UCODE(fxp_ucode_d101s),
2200 D101S_CPUSAVER_DWORD, D101S_CPUSAVER_BUNDLE_MAX_DWORD },
2201 { FXP_REV_82550, UCODE(fxp_ucode_d102),
2202 D102_B_CPUSAVER_DWORD, D102_B_CPUSAVER_BUNDLE_MAX_DWORD },
2203 { FXP_REV_82550_C, UCODE(fxp_ucode_d102c),
2204 D102_C_CPUSAVER_DWORD, D102_C_CPUSAVER_BUNDLE_MAX_DWORD },
2205 { 0, NULL, 0, 0, 0 }
2209 fxp_load_ucode(struct fxp_softc *sc)
2212 struct fxp_cb_ucode *cbp;
2214 for (uc = ucode_table; uc->ucode != NULL; uc++)
2215 if (sc->revision == uc->revision)
2217 if (uc->ucode == NULL)
2219 cbp = (struct fxp_cb_ucode *)sc->cbl_base;
2221 cbp->cb_command = FXP_CB_COMMAND_UCODE | FXP_CB_COMMAND_EL;
2222 cbp->link_addr = -1; /* (no) next command */
2223 memcpy(cbp->ucode, uc->ucode, uc->length);
2224 if (uc->int_delay_offset)
2225 *(u_short *)&cbp->ucode[uc->int_delay_offset] =
2226 sc->tunable_int_delay + sc->tunable_int_delay / 2;
2227 if (uc->bundle_max_offset)
2228 *(u_short *)&cbp->ucode[uc->bundle_max_offset] =
2229 sc->tunable_bundle_max;
2231 * Download the ucode to the chip.
2234 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, vtophys(&cbp->cb_status));
2235 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START);
2236 /* ...and wait for it to complete. */
2237 fxp_dma_wait(&cbp->cb_status, sc);
2238 device_printf(sc->dev,
2239 "Microcode loaded, int_delay: %d usec bundle_max: %d\n",
2240 sc->tunable_int_delay,
2241 uc->bundle_max_offset == 0 ? 0 : sc->tunable_bundle_max);
2242 sc->flags |= FXP_FLAG_UCODE;
2246 sysctl_int_range(SYSCTL_HANDLER_ARGS, int low, int high)
2250 value = *(int *)arg1;
2251 error = sysctl_handle_int(oidp, &value, 0, req);
2252 if (error || !req->newptr)
2254 if (value < low || value > high)
2256 *(int *)arg1 = value;
2261 * Interrupt delay is expressed in microseconds, a multiplier is used
2262 * to convert this to the appropriate clock ticks before using.
2265 sysctl_hw_fxp_int_delay(SYSCTL_HANDLER_ARGS)
2267 return (sysctl_int_range(oidp, arg1, arg2, req, 300, 3000));
2271 sysctl_hw_fxp_bundle_max(SYSCTL_HANDLER_ARGS)
2273 return (sysctl_int_range(oidp, arg1, arg2, req, 1, 0xffff));