2 * SPDX-License-Identifier: BSD-2-Clause-NetBSD
4 * Copyright (c) 1995, David Greenman
5 * Copyright (c) 2001 Jonathan Lemon <jlemon@freebsd.org>
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
11 * 1. Redistributions of source code must retain the above copyright
12 * notice unmodified, this list of conditions, and the following
14 * 2. Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in the
16 * documentation and/or other materials provided with the distribution.
18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32 #include <sys/cdefs.h>
33 __FBSDID("$FreeBSD$");
36 * Intel EtherExpress Pro/100B PCI Fast Ethernet driver
39 #ifdef HAVE_KERNEL_OPTION_HEADERS
40 #include "opt_device_polling.h"
43 #include <sys/param.h>
44 #include <sys/systm.h>
46 #include <sys/endian.h>
47 #include <sys/kernel.h>
50 #include <sys/malloc.h>
51 #include <sys/module.h>
52 #include <sys/mutex.h>
54 #include <sys/socket.h>
55 #include <sys/sockio.h>
56 #include <sys/sysctl.h>
59 #include <net/ethernet.h>
61 #include <net/if_var.h>
62 #include <net/if_arp.h>
63 #include <net/if_dl.h>
64 #include <net/if_media.h>
65 #include <net/if_types.h>
66 #include <net/if_vlan_var.h>
68 #include <netinet/in.h>
69 #include <netinet/in_systm.h>
70 #include <netinet/ip.h>
71 #include <netinet/tcp.h>
72 #include <netinet/udp.h>
74 #include <machine/bus.h>
75 #include <machine/in_cksum.h>
76 #include <machine/resource.h>
78 #include <dev/pci/pcivar.h>
79 #include <dev/pci/pcireg.h> /* for PCIM_CMD_xxx */
81 #include <dev/mii/mii.h>
82 #include <dev/mii/miivar.h>
84 #include <dev/fxp/if_fxpreg.h>
85 #include <dev/fxp/if_fxpvar.h>
86 #include <dev/fxp/rcvbundl.h>
88 MODULE_DEPEND(fxp, pci, 1, 1, 1);
89 MODULE_DEPEND(fxp, ether, 1, 1, 1);
90 MODULE_DEPEND(fxp, miibus, 1, 1, 1);
91 #include "miibus_if.h"
94 * NOTE! On !x86 we typically have an alignment constraint. The
95 * card DMAs the packet immediately following the RFA. However,
96 * the first thing in the packet is a 14-byte Ethernet header.
97 * This means that the packet is misaligned. To compensate,
98 * we actually offset the RFA 2 bytes into the cluster. This
99 * alignes the packet after the Ethernet header at a 32-bit
100 * boundary. HOWEVER! This means that the RFA is misaligned!
102 #define RFA_ALIGNMENT_FUDGE 2
105 * Set initial transmit threshold at 64 (512 bytes). This is
106 * increased by 64 (512 bytes) at a time, to maximum of 192
107 * (1536 bytes), if an underrun occurs.
109 static int tx_threshold = 64;
112 * The configuration byte map has several undefined fields which
113 * must be one or must be zero. Set up a template for these bits.
114 * The actual configuration is performed in fxp_init_body.
116 * See struct fxp_cb_config for the bit definitions.
118 static const u_char fxp_cb_config_template[] = {
119 0x0, 0x0, /* cb_status */
120 0x0, 0x0, /* cb_command */
121 0x0, 0x0, 0x0, 0x0, /* link_addr */
157 * Claim various Intel PCI device identifiers for this driver. The
158 * sub-vendor and sub-device field are extensively used to identify
159 * particular variants, but we don't currently differentiate between
162 static const struct fxp_ident fxp_ident_table[] = {
163 { 0x8086, 0x1029, -1, 0, "Intel 82559 PCI/CardBus Pro/100" },
164 { 0x8086, 0x1030, -1, 0, "Intel 82559 Pro/100 Ethernet" },
165 { 0x8086, 0x1031, -1, 3, "Intel 82801CAM (ICH3) Pro/100 VE Ethernet" },
166 { 0x8086, 0x1032, -1, 3, "Intel 82801CAM (ICH3) Pro/100 VE Ethernet" },
167 { 0x8086, 0x1033, -1, 3, "Intel 82801CAM (ICH3) Pro/100 VM Ethernet" },
168 { 0x8086, 0x1034, -1, 3, "Intel 82801CAM (ICH3) Pro/100 VM Ethernet" },
169 { 0x8086, 0x1035, -1, 3, "Intel 82801CAM (ICH3) Pro/100 Ethernet" },
170 { 0x8086, 0x1036, -1, 3, "Intel 82801CAM (ICH3) Pro/100 Ethernet" },
171 { 0x8086, 0x1037, -1, 3, "Intel 82801CAM (ICH3) Pro/100 Ethernet" },
172 { 0x8086, 0x1038, -1, 3, "Intel 82801CAM (ICH3) Pro/100 VM Ethernet" },
173 { 0x8086, 0x1039, -1, 4, "Intel 82801DB (ICH4) Pro/100 VE Ethernet" },
174 { 0x8086, 0x103A, -1, 4, "Intel 82801DB (ICH4) Pro/100 Ethernet" },
175 { 0x8086, 0x103B, -1, 4, "Intel 82801DB (ICH4) Pro/100 VM Ethernet" },
176 { 0x8086, 0x103C, -1, 4, "Intel 82801DB (ICH4) Pro/100 Ethernet" },
177 { 0x8086, 0x103D, -1, 4, "Intel 82801DB (ICH4) Pro/100 VE Ethernet" },
178 { 0x8086, 0x103E, -1, 4, "Intel 82801DB (ICH4) Pro/100 VM Ethernet" },
179 { 0x8086, 0x1050, -1, 5, "Intel 82801BA (D865) Pro/100 VE Ethernet" },
180 { 0x8086, 0x1051, -1, 5, "Intel 82562ET (ICH5/ICH5R) Pro/100 VE Ethernet" },
181 { 0x8086, 0x1059, -1, 0, "Intel 82551QM Pro/100 M Mobile Connection" },
182 { 0x8086, 0x1064, -1, 6, "Intel 82562EZ (ICH6)" },
183 { 0x8086, 0x1065, -1, 6, "Intel 82562ET/EZ/GT/GZ PRO/100 VE Ethernet" },
184 { 0x8086, 0x1068, -1, 6, "Intel 82801FBM (ICH6-M) Pro/100 VE Ethernet" },
185 { 0x8086, 0x1069, -1, 6, "Intel 82562EM/EX/GX Pro/100 Ethernet" },
186 { 0x8086, 0x1091, -1, 7, "Intel 82562GX Pro/100 Ethernet" },
187 { 0x8086, 0x1092, -1, 7, "Intel Pro/100 VE Network Connection" },
188 { 0x8086, 0x1093, -1, 7, "Intel Pro/100 VM Network Connection" },
189 { 0x8086, 0x1094, -1, 7, "Intel Pro/100 946GZ (ICH7) Network Connection" },
190 { 0x8086, 0x1209, -1, 0, "Intel 82559ER Embedded 10/100 Ethernet" },
191 { 0x8086, 0x1229, 0x01, 0, "Intel 82557 Pro/100 Ethernet" },
192 { 0x8086, 0x1229, 0x02, 0, "Intel 82557 Pro/100 Ethernet" },
193 { 0x8086, 0x1229, 0x03, 0, "Intel 82557 Pro/100 Ethernet" },
194 { 0x8086, 0x1229, 0x04, 0, "Intel 82558 Pro/100 Ethernet" },
195 { 0x8086, 0x1229, 0x05, 0, "Intel 82558 Pro/100 Ethernet" },
196 { 0x8086, 0x1229, 0x06, 0, "Intel 82559 Pro/100 Ethernet" },
197 { 0x8086, 0x1229, 0x07, 0, "Intel 82559 Pro/100 Ethernet" },
198 { 0x8086, 0x1229, 0x08, 0, "Intel 82559 Pro/100 Ethernet" },
199 { 0x8086, 0x1229, 0x09, 0, "Intel 82559ER Pro/100 Ethernet" },
200 { 0x8086, 0x1229, 0x0c, 0, "Intel 82550 Pro/100 Ethernet" },
201 { 0x8086, 0x1229, 0x0d, 0, "Intel 82550C Pro/100 Ethernet" },
202 { 0x8086, 0x1229, 0x0e, 0, "Intel 82550 Pro/100 Ethernet" },
203 { 0x8086, 0x1229, 0x0f, 0, "Intel 82551 Pro/100 Ethernet" },
204 { 0x8086, 0x1229, 0x10, 0, "Intel 82551 Pro/100 Ethernet" },
205 { 0x8086, 0x1229, -1, 0, "Intel 82557/8/9 Pro/100 Ethernet" },
206 { 0x8086, 0x2449, -1, 2, "Intel 82801BA/CAM (ICH2/3) Pro/100 Ethernet" },
207 { 0x8086, 0x27dc, -1, 7, "Intel 82801GB (ICH7) 10/100 Ethernet" },
208 { 0, 0, -1, 0, NULL },
211 #ifdef FXP_IP_CSUM_WAR
212 #define FXP_CSUM_FEATURES (CSUM_IP | CSUM_TCP | CSUM_UDP)
214 #define FXP_CSUM_FEATURES (CSUM_TCP | CSUM_UDP)
217 static int fxp_probe(device_t dev);
218 static int fxp_attach(device_t dev);
219 static int fxp_detach(device_t dev);
220 static int fxp_shutdown(device_t dev);
221 static int fxp_suspend(device_t dev);
222 static int fxp_resume(device_t dev);
224 static const struct fxp_ident *fxp_find_ident(device_t dev);
225 static void fxp_intr(void *xsc);
226 static void fxp_rxcsum(struct fxp_softc *sc, if_t ifp,
227 struct mbuf *m, uint16_t status, int pos);
228 static int fxp_intr_body(struct fxp_softc *sc, if_t ifp,
229 uint8_t statack, int count);
230 static void fxp_init(void *xsc);
231 static void fxp_init_body(struct fxp_softc *sc, int);
232 static void fxp_tick(void *xsc);
233 static void fxp_start(if_t ifp);
234 static void fxp_start_body(if_t ifp);
235 static int fxp_encap(struct fxp_softc *sc, struct mbuf **m_head);
236 static void fxp_txeof(struct fxp_softc *sc);
237 static void fxp_stop(struct fxp_softc *sc);
238 static void fxp_release(struct fxp_softc *sc);
239 static int fxp_ioctl(if_t ifp, u_long command,
241 static void fxp_watchdog(struct fxp_softc *sc);
242 static void fxp_add_rfabuf(struct fxp_softc *sc,
244 static void fxp_discard_rfabuf(struct fxp_softc *sc,
246 static int fxp_new_rfabuf(struct fxp_softc *sc,
248 static int fxp_mc_addrs(struct fxp_softc *sc);
249 static void fxp_mc_setup(struct fxp_softc *sc);
250 static uint16_t fxp_eeprom_getword(struct fxp_softc *sc, int offset,
252 static void fxp_eeprom_putword(struct fxp_softc *sc, int offset,
254 static void fxp_autosize_eeprom(struct fxp_softc *sc);
255 static void fxp_load_eeprom(struct fxp_softc *sc);
256 static void fxp_read_eeprom(struct fxp_softc *sc, u_short *data,
257 int offset, int words);
258 static void fxp_write_eeprom(struct fxp_softc *sc, u_short *data,
259 int offset, int words);
260 static int fxp_ifmedia_upd(if_t ifp);
261 static void fxp_ifmedia_sts(if_t ifp,
262 struct ifmediareq *ifmr);
263 static int fxp_serial_ifmedia_upd(if_t ifp);
264 static void fxp_serial_ifmedia_sts(if_t ifp,
265 struct ifmediareq *ifmr);
266 static int fxp_miibus_readreg(device_t dev, int phy, int reg);
267 static int fxp_miibus_writereg(device_t dev, int phy, int reg,
269 static void fxp_miibus_statchg(device_t dev);
270 static void fxp_load_ucode(struct fxp_softc *sc);
271 static void fxp_update_stats(struct fxp_softc *sc);
272 static void fxp_sysctl_node(struct fxp_softc *sc);
273 static int sysctl_int_range(SYSCTL_HANDLER_ARGS,
275 static int sysctl_hw_fxp_bundle_max(SYSCTL_HANDLER_ARGS);
276 static int sysctl_hw_fxp_int_delay(SYSCTL_HANDLER_ARGS);
277 static void fxp_scb_wait(struct fxp_softc *sc);
278 static void fxp_scb_cmd(struct fxp_softc *sc, int cmd);
279 static void fxp_dma_wait(struct fxp_softc *sc,
280 volatile uint16_t *status, bus_dma_tag_t dmat,
283 static device_method_t fxp_methods[] = {
284 /* Device interface */
285 DEVMETHOD(device_probe, fxp_probe),
286 DEVMETHOD(device_attach, fxp_attach),
287 DEVMETHOD(device_detach, fxp_detach),
288 DEVMETHOD(device_shutdown, fxp_shutdown),
289 DEVMETHOD(device_suspend, fxp_suspend),
290 DEVMETHOD(device_resume, fxp_resume),
293 DEVMETHOD(miibus_readreg, fxp_miibus_readreg),
294 DEVMETHOD(miibus_writereg, fxp_miibus_writereg),
295 DEVMETHOD(miibus_statchg, fxp_miibus_statchg),
300 static driver_t fxp_driver = {
303 sizeof(struct fxp_softc),
306 static devclass_t fxp_devclass;
308 DRIVER_MODULE_ORDERED(fxp, pci, fxp_driver, fxp_devclass, NULL, NULL,
310 MODULE_PNP_INFO("U16:vendor;U16:device", pci, fxp, fxp_ident_table,
311 sizeof(fxp_ident_table[0]), nitems(fxp_ident_table) - 1);
312 DRIVER_MODULE(miibus, fxp, miibus_driver, miibus_devclass, NULL, NULL);
314 static struct resource_spec fxp_res_spec_mem[] = {
315 { SYS_RES_MEMORY, FXP_PCI_MMBA, RF_ACTIVE },
316 { SYS_RES_IRQ, 0, RF_ACTIVE | RF_SHAREABLE },
320 static struct resource_spec fxp_res_spec_io[] = {
321 { SYS_RES_IOPORT, FXP_PCI_IOBA, RF_ACTIVE },
322 { SYS_RES_IRQ, 0, RF_ACTIVE | RF_SHAREABLE },
327 * Wait for the previous command to be accepted (but not necessarily
331 fxp_scb_wait(struct fxp_softc *sc)
339 while (CSR_READ_1(sc, FXP_CSR_SCB_COMMAND) && --i)
342 flowctl.b[0] = CSR_READ_1(sc, FXP_CSR_FC_THRESH);
343 flowctl.b[1] = CSR_READ_1(sc, FXP_CSR_FC_STATUS);
344 device_printf(sc->dev, "SCB timeout: 0x%x 0x%x 0x%x 0x%x\n",
345 CSR_READ_1(sc, FXP_CSR_SCB_COMMAND),
346 CSR_READ_1(sc, FXP_CSR_SCB_STATACK),
347 CSR_READ_1(sc, FXP_CSR_SCB_RUSCUS), flowctl.w);
352 fxp_scb_cmd(struct fxp_softc *sc, int cmd)
355 if (cmd == FXP_SCB_COMMAND_CU_RESUME && sc->cu_resume_bug) {
356 CSR_WRITE_1(sc, FXP_CSR_SCB_COMMAND, FXP_CB_COMMAND_NOP);
359 CSR_WRITE_1(sc, FXP_CSR_SCB_COMMAND, cmd);
363 fxp_dma_wait(struct fxp_softc *sc, volatile uint16_t *status,
364 bus_dma_tag_t dmat, bus_dmamap_t map)
368 for (i = 10000; i > 0; i--) {
370 bus_dmamap_sync(dmat, map,
371 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
372 if ((le16toh(*status) & FXP_CB_STATUS_C) != 0)
376 device_printf(sc->dev, "DMA timeout\n");
379 static const struct fxp_ident *
380 fxp_find_ident(device_t dev)
385 const struct fxp_ident *ident;
387 vendor = pci_get_vendor(dev);
388 device = pci_get_device(dev);
389 revid = pci_get_revid(dev);
390 for (ident = fxp_ident_table; ident->name != NULL; ident++) {
391 if (ident->vendor == vendor && ident->device == device &&
392 (ident->revid == revid || ident->revid == -1)) {
400 * Return identification string if this device is ours.
403 fxp_probe(device_t dev)
405 const struct fxp_ident *ident;
407 ident = fxp_find_ident(dev);
409 device_set_desc(dev, ident->name);
410 return (BUS_PROBE_DEFAULT);
416 fxp_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error)
423 KASSERT(nseg == 1, ("too many DMA segments, %d should be 1", nseg));
425 *addr = segs->ds_addr;
429 fxp_attach(device_t dev)
431 struct fxp_softc *sc;
432 struct fxp_cb_tx *tcbp;
438 u_char eaddr[ETHER_ADDR_LEN];
439 int error, flags, i, pmc, prefer_iomap;
442 sc = device_get_softc(dev);
444 mtx_init(&sc->sc_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
446 callout_init_mtx(&sc->stat_ch, &sc->sc_mtx, 0);
447 ifmedia_init(&sc->sc_media, 0, fxp_serial_ifmedia_upd,
448 fxp_serial_ifmedia_sts);
450 ifp = sc->ifp = if_gethandle(IFT_ETHER);
451 if (ifp == (void *)NULL) {
452 device_printf(dev, "can not if_alloc()\n");
458 * Enable bus mastering.
460 pci_enable_busmaster(dev);
463 * Figure out which we should try first - memory mapping or i/o mapping?
464 * We default to memory mapping. Then we accept an override from the
465 * command line. Then we check to see which one is enabled.
468 resource_int_value(device_get_name(dev), device_get_unit(dev),
469 "prefer_iomap", &prefer_iomap);
471 sc->fxp_spec = fxp_res_spec_io;
473 sc->fxp_spec = fxp_res_spec_mem;
475 error = bus_alloc_resources(dev, sc->fxp_spec, sc->fxp_res);
477 if (sc->fxp_spec == fxp_res_spec_mem)
478 sc->fxp_spec = fxp_res_spec_io;
480 sc->fxp_spec = fxp_res_spec_mem;
481 error = bus_alloc_resources(dev, sc->fxp_spec, sc->fxp_res);
484 device_printf(dev, "could not allocate resources\n");
490 device_printf(dev, "using %s space register mapping\n",
491 sc->fxp_spec == fxp_res_spec_mem ? "memory" : "I/O");
495 * Put CU/RU idle state and prepare full reset.
497 CSR_WRITE_4(sc, FXP_CSR_PORT, FXP_PORT_SELECTIVE_RESET);
499 /* Full reset and disable interrupts. */
500 CSR_WRITE_4(sc, FXP_CSR_PORT, FXP_PORT_SOFTWARE_RESET);
502 CSR_WRITE_1(sc, FXP_CSR_SCB_INTRCNTL, FXP_SCB_INTR_DISABLE);
505 * Find out how large of an SEEPROM we have.
507 fxp_autosize_eeprom(sc);
511 * Find out the chip revision; lump all 82557 revs together.
513 sc->ident = fxp_find_ident(dev);
514 if (sc->ident->ich > 0) {
515 /* Assume ICH controllers are 82559. */
516 sc->revision = FXP_REV_82559_A0;
518 data = sc->eeprom[FXP_EEPROM_MAP_CNTR];
519 if ((data >> 8) == 1)
520 sc->revision = FXP_REV_82557;
522 sc->revision = pci_get_revid(dev);
526 * Check availability of WOL. 82559ER does not support WOL.
528 if (sc->revision >= FXP_REV_82558_A4 &&
529 sc->revision != FXP_REV_82559S_A) {
530 data = sc->eeprom[FXP_EEPROM_MAP_ID];
531 if ((data & 0x20) != 0 &&
532 pci_find_cap(sc->dev, PCIY_PMG, &pmc) == 0)
533 sc->flags |= FXP_FLAG_WOLCAP;
536 if (sc->revision == FXP_REV_82550_C) {
538 * 82550C with server extension requires microcode to
539 * receive fragmented UDP datagrams. However if the
540 * microcode is used for client-only featured 82550C
541 * it locks up controller.
543 data = sc->eeprom[FXP_EEPROM_MAP_COMPAT];
544 if ((data & 0x0400) == 0)
545 sc->flags |= FXP_FLAG_NO_UCODE;
548 /* Receiver lock-up workaround detection. */
549 if (sc->revision < FXP_REV_82558_A4) {
550 data = sc->eeprom[FXP_EEPROM_MAP_COMPAT];
551 if ((data & 0x03) != 0x03) {
552 sc->flags |= FXP_FLAG_RXBUG;
553 device_printf(dev, "Enabling Rx lock-up workaround\n");
558 * Determine whether we must use the 503 serial interface.
560 data = sc->eeprom[FXP_EEPROM_MAP_PRI_PHY];
561 if (sc->revision == FXP_REV_82557 && (data & FXP_PHY_DEVICE_MASK) != 0
562 && (data & FXP_PHY_SERIAL_ONLY))
563 sc->flags |= FXP_FLAG_SERIAL_MEDIA;
567 * Enable workarounds for certain chip revision deficiencies.
569 * Systems based on the ICH2/ICH2-M chip from Intel, and possibly
570 * some systems based a normal 82559 design, have a defect where
571 * the chip can cause a PCI protocol violation if it receives
572 * a CU_RESUME command when it is entering the IDLE state. The
573 * workaround is to disable Dynamic Standby Mode, so the chip never
574 * deasserts CLKRUN#, and always remains in an active state.
576 * See Intel 82801BA/82801BAM Specification Update, Errata #30.
578 if ((sc->ident->ich >= 2 && sc->ident->ich <= 3) ||
579 (sc->ident->ich == 0 && sc->revision >= FXP_REV_82559_A0)) {
580 data = sc->eeprom[FXP_EEPROM_MAP_ID];
581 if (data & 0x02) { /* STB enable */
586 "Disabling dynamic standby mode in EEPROM\n");
588 sc->eeprom[FXP_EEPROM_MAP_ID] = data;
589 fxp_write_eeprom(sc, &data, FXP_EEPROM_MAP_ID, 1);
590 device_printf(dev, "New EEPROM ID: 0x%x\n", data);
592 for (i = 0; i < (1 << sc->eeprom_size) - 1; i++)
593 cksum += sc->eeprom[i];
594 i = (1 << sc->eeprom_size) - 1;
595 cksum = 0xBABA - cksum;
596 fxp_write_eeprom(sc, &cksum, i, 1);
598 "EEPROM checksum @ 0x%x: 0x%x -> 0x%x\n",
599 i, sc->eeprom[i], cksum);
600 sc->eeprom[i] = cksum;
602 * If the user elects to continue, try the software
603 * workaround, as it is better than nothing.
605 sc->flags |= FXP_FLAG_CU_RESUME_BUG;
610 * If we are not a 82557 chip, we can enable extended features.
612 if (sc->revision != FXP_REV_82557) {
614 * If MWI is enabled in the PCI configuration, and there
615 * is a valid cacheline size (8 or 16 dwords), then tell
616 * the board to turn on MWI.
618 val = pci_read_config(dev, PCIR_COMMAND, 2);
619 if (val & PCIM_CMD_MWRICEN &&
620 pci_read_config(dev, PCIR_CACHELNSZ, 1) != 0)
621 sc->flags |= FXP_FLAG_MWI_ENABLE;
623 /* turn on the extended TxCB feature */
624 sc->flags |= FXP_FLAG_EXT_TXCB;
626 /* enable reception of long frames for VLAN */
627 sc->flags |= FXP_FLAG_LONG_PKT_EN;
629 /* a hack to get long VLAN frames on a 82557 */
630 sc->flags |= FXP_FLAG_SAVE_BAD;
633 /* For 82559 or later chips, Rx checksum offload is supported. */
634 if (sc->revision >= FXP_REV_82559_A0) {
635 /* 82559ER does not support Rx checksum offloading. */
636 if (sc->ident->device != 0x1209)
637 sc->flags |= FXP_FLAG_82559_RXCSUM;
640 * Enable use of extended RFDs and TCBs for 82550
641 * and later chips. Note: we need extended TXCB support
642 * too, but that's already enabled by the code above.
643 * Be careful to do this only on the right devices.
645 if (sc->revision == FXP_REV_82550 || sc->revision == FXP_REV_82550_C ||
646 sc->revision == FXP_REV_82551_E || sc->revision == FXP_REV_82551_F
647 || sc->revision == FXP_REV_82551_10) {
648 sc->rfa_size = sizeof (struct fxp_rfa);
649 sc->tx_cmd = FXP_CB_COMMAND_IPCBXMIT;
650 sc->flags |= FXP_FLAG_EXT_RFA;
651 /* Use extended RFA instead of 82559 checksum mode. */
652 sc->flags &= ~FXP_FLAG_82559_RXCSUM;
654 sc->rfa_size = sizeof (struct fxp_rfa) - FXP_RFAX_LEN;
655 sc->tx_cmd = FXP_CB_COMMAND_XMIT;
659 * Allocate DMA tags and DMA safe memory.
661 sc->maxtxseg = FXP_NTXSEG;
662 sc->maxsegsize = MCLBYTES;
663 if (sc->flags & FXP_FLAG_EXT_RFA) {
665 sc->maxsegsize = FXP_TSO_SEGSIZE;
667 error = bus_dma_tag_create(bus_get_dma_tag(dev), 2, 0,
668 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
669 sc->maxsegsize * sc->maxtxseg + sizeof(struct ether_vlan_header),
670 sc->maxtxseg, sc->maxsegsize, 0,
671 busdma_lock_mutex, &Giant, &sc->fxp_txmtag);
673 device_printf(dev, "could not create TX DMA tag\n");
677 error = bus_dma_tag_create(bus_get_dma_tag(dev), 2, 0,
678 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
679 MCLBYTES, 1, MCLBYTES, 0,
680 busdma_lock_mutex, &Giant, &sc->fxp_rxmtag);
682 device_printf(dev, "could not create RX DMA tag\n");
686 error = bus_dma_tag_create(bus_get_dma_tag(dev), 4, 0,
687 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
688 sizeof(struct fxp_stats), 1, sizeof(struct fxp_stats), 0,
689 busdma_lock_mutex, &Giant, &sc->fxp_stag);
691 device_printf(dev, "could not create stats DMA tag\n");
695 error = bus_dmamem_alloc(sc->fxp_stag, (void **)&sc->fxp_stats,
696 BUS_DMA_NOWAIT | BUS_DMA_COHERENT | BUS_DMA_ZERO, &sc->fxp_smap);
698 device_printf(dev, "could not allocate stats DMA memory\n");
701 error = bus_dmamap_load(sc->fxp_stag, sc->fxp_smap, sc->fxp_stats,
702 sizeof(struct fxp_stats), fxp_dma_map_addr, &sc->stats_addr,
705 device_printf(dev, "could not load the stats DMA buffer\n");
709 error = bus_dma_tag_create(bus_get_dma_tag(dev), 4, 0,
710 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
711 FXP_TXCB_SZ, 1, FXP_TXCB_SZ, 0,
712 busdma_lock_mutex, &Giant, &sc->cbl_tag);
714 device_printf(dev, "could not create TxCB DMA tag\n");
718 error = bus_dmamem_alloc(sc->cbl_tag, (void **)&sc->fxp_desc.cbl_list,
719 BUS_DMA_NOWAIT | BUS_DMA_COHERENT | BUS_DMA_ZERO, &sc->cbl_map);
721 device_printf(dev, "could not allocate TxCB DMA memory\n");
725 error = bus_dmamap_load(sc->cbl_tag, sc->cbl_map,
726 sc->fxp_desc.cbl_list, FXP_TXCB_SZ, fxp_dma_map_addr,
727 &sc->fxp_desc.cbl_addr, BUS_DMA_NOWAIT);
729 device_printf(dev, "could not load TxCB DMA buffer\n");
733 error = bus_dma_tag_create(bus_get_dma_tag(dev), 4, 0,
734 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
735 sizeof(struct fxp_cb_mcs), 1, sizeof(struct fxp_cb_mcs), 0,
736 busdma_lock_mutex, &Giant, &sc->mcs_tag);
739 "could not create multicast setup DMA tag\n");
743 error = bus_dmamem_alloc(sc->mcs_tag, (void **)&sc->mcsp,
744 BUS_DMA_NOWAIT | BUS_DMA_COHERENT | BUS_DMA_ZERO, &sc->mcs_map);
747 "could not allocate multicast setup DMA memory\n");
750 error = bus_dmamap_load(sc->mcs_tag, sc->mcs_map, sc->mcsp,
751 sizeof(struct fxp_cb_mcs), fxp_dma_map_addr, &sc->mcs_addr,
755 "can't load the multicast setup DMA buffer\n");
760 * Pre-allocate the TX DMA maps and setup the pointers to
761 * the TX command blocks.
763 txp = sc->fxp_desc.tx_list;
764 tcbp = sc->fxp_desc.cbl_list;
765 for (i = 0; i < FXP_NTXCB; i++) {
766 txp[i].tx_cb = tcbp + i;
767 error = bus_dmamap_create(sc->fxp_txmtag, 0, &txp[i].tx_map);
769 device_printf(dev, "can't create DMA map for TX\n");
773 error = bus_dmamap_create(sc->fxp_rxmtag, 0, &sc->spare_map);
775 device_printf(dev, "can't create spare DMA map\n");
780 * Pre-allocate our receive buffers.
782 sc->fxp_desc.rx_head = sc->fxp_desc.rx_tail = NULL;
783 for (i = 0; i < FXP_NRFABUFS; i++) {
784 rxp = &sc->fxp_desc.rx_list[i];
785 error = bus_dmamap_create(sc->fxp_rxmtag, 0, &rxp->rx_map);
787 device_printf(dev, "can't create DMA map for RX\n");
790 if (fxp_new_rfabuf(sc, rxp) != 0) {
794 fxp_add_rfabuf(sc, rxp);
800 eaddr[0] = sc->eeprom[FXP_EEPROM_MAP_IA0] & 0xff;
801 eaddr[1] = sc->eeprom[FXP_EEPROM_MAP_IA0] >> 8;
802 eaddr[2] = sc->eeprom[FXP_EEPROM_MAP_IA1] & 0xff;
803 eaddr[3] = sc->eeprom[FXP_EEPROM_MAP_IA1] >> 8;
804 eaddr[4] = sc->eeprom[FXP_EEPROM_MAP_IA2] & 0xff;
805 eaddr[5] = sc->eeprom[FXP_EEPROM_MAP_IA2] >> 8;
807 device_printf(dev, "PCI IDs: %04x %04x %04x %04x %04x\n",
808 pci_get_vendor(dev), pci_get_device(dev),
809 pci_get_subvendor(dev), pci_get_subdevice(dev),
811 device_printf(dev, "Dynamic Standby mode is %s\n",
812 sc->eeprom[FXP_EEPROM_MAP_ID] & 0x02 ? "enabled" :
817 * If this is only a 10Mbps device, then there is no MII, and
818 * the PHY will use a serial interface instead.
820 * The Seeq 80c24 AutoDUPLEX(tm) Ethernet Interface Adapter
821 * doesn't have a programming interface of any sort. The
822 * media is sensed automatically based on how the link partner
823 * is configured. This is, in essence, manual configuration.
825 if (sc->flags & FXP_FLAG_SERIAL_MEDIA) {
826 ifmedia_add(&sc->sc_media, IFM_ETHER|IFM_MANUAL, 0, NULL);
827 ifmedia_set(&sc->sc_media, IFM_ETHER|IFM_MANUAL);
830 * i82557 wedge when isolating all of their PHYs.
832 flags = MIIF_NOISOLATE;
833 if (sc->revision >= FXP_REV_82558_A4)
834 flags |= MIIF_DOPAUSE;
835 error = mii_attach(dev, &sc->miibus, ifp,
836 (ifm_change_cb_t)fxp_ifmedia_upd,
837 (ifm_stat_cb_t)fxp_ifmedia_sts, BMSR_DEFCAPMASK,
838 MII_PHY_ANY, MII_OFFSET_ANY, flags);
840 device_printf(dev, "attaching PHYs failed\n");
845 if_initname(ifp, device_get_name(dev), device_get_unit(dev));
847 if_setinitfn(ifp, fxp_init);
848 if_setsoftc(ifp, sc);
849 if_setflags(ifp, IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST);
850 if_setioctlfn(ifp, fxp_ioctl);
851 if_setstartfn(ifp, fxp_start);
853 if_setcapabilities(ifp, 0);
854 if_setcapenable(ifp, 0);
856 /* Enable checksum offload/TSO for 82550 or better chips */
857 if (sc->flags & FXP_FLAG_EXT_RFA) {
858 if_sethwassist(ifp, FXP_CSUM_FEATURES | CSUM_TSO);
859 if_setcapabilitiesbit(ifp, IFCAP_HWCSUM | IFCAP_TSO4, 0);
860 if_setcapenablebit(ifp, IFCAP_HWCSUM | IFCAP_TSO4, 0);
863 if (sc->flags & FXP_FLAG_82559_RXCSUM) {
864 if_setcapabilitiesbit(ifp, IFCAP_RXCSUM, 0);
865 if_setcapenablebit(ifp, IFCAP_RXCSUM, 0);
868 if (sc->flags & FXP_FLAG_WOLCAP) {
869 if_setcapabilitiesbit(ifp, IFCAP_WOL_MAGIC, 0);
870 if_setcapenablebit(ifp, IFCAP_WOL_MAGIC, 0);
873 #ifdef DEVICE_POLLING
874 /* Inform the world we support polling. */
875 if_setcapabilitiesbit(ifp, IFCAP_POLLING, 0);
879 * Attach the interface.
881 ether_ifattach(ifp, eaddr);
884 * Tell the upper layer(s) we support long frames.
885 * Must appear after the call to ether_ifattach() because
886 * ether_ifattach() sets ifi_hdrlen to the default value.
888 if_setifheaderlen(ifp, sizeof(struct ether_vlan_header));
889 if_setcapabilitiesbit(ifp, IFCAP_VLAN_MTU, 0);
890 if_setcapenablebit(ifp, IFCAP_VLAN_MTU, 0);
891 if ((sc->flags & FXP_FLAG_EXT_RFA) != 0) {
892 if_setcapabilitiesbit(ifp, IFCAP_VLAN_HWTAGGING |
893 IFCAP_VLAN_HWCSUM | IFCAP_VLAN_HWTSO, 0);
894 if_setcapenablebit(ifp, IFCAP_VLAN_HWTAGGING |
895 IFCAP_VLAN_HWCSUM | IFCAP_VLAN_HWTSO, 0);
899 * Let the system queue as many packets as we have available
902 if_setsendqlen(ifp, FXP_NTXCB - 1);
903 if_setsendqready(ifp);
906 * Hook our interrupt after all initialization is complete.
908 error = bus_setup_intr(dev, sc->fxp_res[1], INTR_TYPE_NET | INTR_MPSAFE,
909 NULL, fxp_intr, sc, &sc->ih);
911 device_printf(dev, "could not setup irq\n");
912 ether_ifdetach(sc->ifp);
917 * Configure hardware to reject magic frames otherwise
918 * system will hang on recipt of magic frames.
920 if ((sc->flags & FXP_FLAG_WOLCAP) != 0) {
922 /* Clear wakeup events. */
923 CSR_WRITE_1(sc, FXP_CSR_PMDR, CSR_READ_1(sc, FXP_CSR_PMDR));
924 fxp_init_body(sc, 0);
936 * Release all resources. The softc lock should not be held and the
937 * interrupt should already be torn down.
940 fxp_release(struct fxp_softc *sc)
946 FXP_LOCK_ASSERT(sc, MA_NOTOWNED);
947 KASSERT(sc->ih == NULL,
948 ("fxp_release() called with intr handle still active"));
950 device_delete_child(sc->dev, sc->miibus);
951 bus_generic_detach(sc->dev);
952 ifmedia_removeall(&sc->sc_media);
953 if (sc->fxp_desc.cbl_list) {
954 bus_dmamap_unload(sc->cbl_tag, sc->cbl_map);
955 bus_dmamem_free(sc->cbl_tag, sc->fxp_desc.cbl_list,
959 bus_dmamap_unload(sc->fxp_stag, sc->fxp_smap);
960 bus_dmamem_free(sc->fxp_stag, sc->fxp_stats, sc->fxp_smap);
963 bus_dmamap_unload(sc->mcs_tag, sc->mcs_map);
964 bus_dmamem_free(sc->mcs_tag, sc->mcsp, sc->mcs_map);
966 bus_release_resources(sc->dev, sc->fxp_spec, sc->fxp_res);
967 if (sc->fxp_rxmtag) {
968 for (i = 0; i < FXP_NRFABUFS; i++) {
969 rxp = &sc->fxp_desc.rx_list[i];
970 if (rxp->rx_mbuf != NULL) {
971 bus_dmamap_sync(sc->fxp_rxmtag, rxp->rx_map,
972 BUS_DMASYNC_POSTREAD);
973 bus_dmamap_unload(sc->fxp_rxmtag, rxp->rx_map);
974 m_freem(rxp->rx_mbuf);
976 bus_dmamap_destroy(sc->fxp_rxmtag, rxp->rx_map);
978 bus_dmamap_destroy(sc->fxp_rxmtag, sc->spare_map);
979 bus_dma_tag_destroy(sc->fxp_rxmtag);
981 if (sc->fxp_txmtag) {
982 for (i = 0; i < FXP_NTXCB; i++) {
983 txp = &sc->fxp_desc.tx_list[i];
984 if (txp->tx_mbuf != NULL) {
985 bus_dmamap_sync(sc->fxp_txmtag, txp->tx_map,
986 BUS_DMASYNC_POSTWRITE);
987 bus_dmamap_unload(sc->fxp_txmtag, txp->tx_map);
988 m_freem(txp->tx_mbuf);
990 bus_dmamap_destroy(sc->fxp_txmtag, txp->tx_map);
992 bus_dma_tag_destroy(sc->fxp_txmtag);
995 bus_dma_tag_destroy(sc->fxp_stag);
997 bus_dma_tag_destroy(sc->cbl_tag);
999 bus_dma_tag_destroy(sc->mcs_tag);
1003 mtx_destroy(&sc->sc_mtx);
1010 fxp_detach(device_t dev)
1012 struct fxp_softc *sc = device_get_softc(dev);
1014 #ifdef DEVICE_POLLING
1015 if (if_getcapenable(sc->ifp) & IFCAP_POLLING)
1016 ether_poll_deregister(sc->ifp);
1021 * Stop DMA and drop transmit queue, but disable interrupts first.
1023 CSR_WRITE_1(sc, FXP_CSR_SCB_INTRCNTL, FXP_SCB_INTR_DISABLE);
1026 callout_drain(&sc->stat_ch);
1029 * Close down routes etc.
1031 ether_ifdetach(sc->ifp);
1034 * Unhook interrupt before dropping lock. This is to prevent
1035 * races with fxp_intr().
1037 bus_teardown_intr(sc->dev, sc->fxp_res[1], sc->ih);
1040 /* Release our allocated resources. */
1046 * Device shutdown routine. Called at system shutdown after sync. The
1047 * main purpose of this routine is to shut off receiver DMA so that
1048 * kernel memory doesn't get clobbered during warmboot.
1051 fxp_shutdown(device_t dev)
1055 * Make sure that DMA is disabled prior to reboot. Not doing
1056 * do could allow DMA to corrupt kernel memory during the
1057 * reboot before the driver initializes.
1059 return (fxp_suspend(dev));
1063 * Device suspend routine. Stop the interface and save some PCI
1064 * settings in case the BIOS doesn't restore them properly on
1068 fxp_suspend(device_t dev)
1070 struct fxp_softc *sc = device_get_softc(dev);
1078 if (pci_find_cap(sc->dev, PCIY_PMG, &pmc) == 0) {
1079 pmstat = pci_read_config(sc->dev, pmc + PCIR_POWER_STATUS, 2);
1080 pmstat &= ~(PCIM_PSTAT_PME | PCIM_PSTAT_PMEENABLE);
1081 if ((if_getcapenable(ifp) & IFCAP_WOL_MAGIC) != 0) {
1083 pmstat |= PCIM_PSTAT_PME | PCIM_PSTAT_PMEENABLE;
1084 sc->flags |= FXP_FLAG_WOL;
1085 /* Reconfigure hardware to accept magic frames. */
1086 if_setdrvflagbits(ifp, 0, IFF_DRV_RUNNING);
1087 fxp_init_body(sc, 0);
1089 pci_write_config(sc->dev, pmc + PCIR_POWER_STATUS, pmstat, 2);
1100 * Device resume routine. re-enable busmastering, and restart the interface if
1104 fxp_resume(device_t dev)
1106 struct fxp_softc *sc = device_get_softc(dev);
1113 if (pci_find_cap(sc->dev, PCIY_PMG, &pmc) == 0) {
1114 sc->flags &= ~FXP_FLAG_WOL;
1115 pmstat = pci_read_config(sc->dev, pmc + PCIR_POWER_STATUS, 2);
1116 /* Disable PME and clear PME status. */
1117 pmstat &= ~PCIM_PSTAT_PMEENABLE;
1118 pci_write_config(sc->dev, pmc + PCIR_POWER_STATUS, pmstat, 2);
1119 if ((sc->flags & FXP_FLAG_WOLCAP) != 0)
1120 CSR_WRITE_1(sc, FXP_CSR_PMDR,
1121 CSR_READ_1(sc, FXP_CSR_PMDR));
1124 CSR_WRITE_4(sc, FXP_CSR_PORT, FXP_PORT_SELECTIVE_RESET);
1127 /* reinitialize interface if necessary */
1128 if (if_getflags(ifp) & IFF_UP)
1129 fxp_init_body(sc, 1);
1138 fxp_eeprom_shiftin(struct fxp_softc *sc, int data, int length)
1146 for (x = 1 << (length - 1); x; x >>= 1) {
1148 reg = FXP_EEPROM_EECS | FXP_EEPROM_EEDI;
1150 reg = FXP_EEPROM_EECS;
1151 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg);
1153 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg | FXP_EEPROM_EESK);
1155 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg);
1161 * Read from the serial EEPROM. Basically, you manually shift in
1162 * the read opcode (one bit at a time) and then shift in the address,
1163 * and then you shift out the data (all of this one bit at a time).
1164 * The word size is 16 bits, so you have to provide the address for
1165 * every 16 bits of data.
1168 fxp_eeprom_getword(struct fxp_softc *sc, int offset, int autosize)
1173 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS);
1175 * Shift in read opcode.
1177 fxp_eeprom_shiftin(sc, FXP_EEPROM_OPC_READ, 3);
1182 for (x = 1 << (sc->eeprom_size - 1); x; x >>= 1) {
1184 reg = FXP_EEPROM_EECS | FXP_EEPROM_EEDI;
1186 reg = FXP_EEPROM_EECS;
1187 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg);
1189 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg | FXP_EEPROM_EESK);
1191 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg);
1193 reg = CSR_READ_2(sc, FXP_CSR_EEPROMCONTROL) & FXP_EEPROM_EEDO;
1195 if (autosize && reg == 0) {
1196 sc->eeprom_size = data;
1204 reg = FXP_EEPROM_EECS;
1205 for (x = 1 << 15; x; x >>= 1) {
1206 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg | FXP_EEPROM_EESK);
1208 if (CSR_READ_2(sc, FXP_CSR_EEPROMCONTROL) & FXP_EEPROM_EEDO)
1210 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, reg);
1213 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0);
1220 fxp_eeprom_putword(struct fxp_softc *sc, int offset, uint16_t data)
1225 * Erase/write enable.
1227 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS);
1228 fxp_eeprom_shiftin(sc, 0x4, 3);
1229 fxp_eeprom_shiftin(sc, 0x03 << (sc->eeprom_size - 2), sc->eeprom_size);
1230 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0);
1233 * Shift in write opcode, address, data.
1235 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS);
1236 fxp_eeprom_shiftin(sc, FXP_EEPROM_OPC_WRITE, 3);
1237 fxp_eeprom_shiftin(sc, offset, sc->eeprom_size);
1238 fxp_eeprom_shiftin(sc, data, 16);
1239 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0);
1242 * Wait for EEPROM to finish up.
1244 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS);
1246 for (i = 0; i < 1000; i++) {
1247 if (CSR_READ_2(sc, FXP_CSR_EEPROMCONTROL) & FXP_EEPROM_EEDO)
1251 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0);
1254 * Erase/write disable.
1256 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, FXP_EEPROM_EECS);
1257 fxp_eeprom_shiftin(sc, 0x4, 3);
1258 fxp_eeprom_shiftin(sc, 0, sc->eeprom_size);
1259 CSR_WRITE_2(sc, FXP_CSR_EEPROMCONTROL, 0);
1266 * Figure out EEPROM size.
1268 * 559's can have either 64-word or 256-word EEPROMs, the 558
1269 * datasheet only talks about 64-word EEPROMs, and the 557 datasheet
1270 * talks about the existence of 16 to 256 word EEPROMs.
1272 * The only known sizes are 64 and 256, where the 256 version is used
1273 * by CardBus cards to store CIS information.
1275 * The address is shifted in msb-to-lsb, and after the last
1276 * address-bit the EEPROM is supposed to output a `dummy zero' bit,
1277 * after which follows the actual data. We try to detect this zero, by
1278 * probing the data-out bit in the EEPROM control register just after
1279 * having shifted in a bit. If the bit is zero, we assume we've
1280 * shifted enough address bits. The data-out should be tri-state,
1281 * before this, which should translate to a logical one.
1284 fxp_autosize_eeprom(struct fxp_softc *sc)
1287 /* guess maximum size of 256 words */
1288 sc->eeprom_size = 8;
1291 (void) fxp_eeprom_getword(sc, 0, 1);
1295 fxp_read_eeprom(struct fxp_softc *sc, u_short *data, int offset, int words)
1299 for (i = 0; i < words; i++)
1300 data[i] = fxp_eeprom_getword(sc, offset + i, 0);
1304 fxp_write_eeprom(struct fxp_softc *sc, u_short *data, int offset, int words)
1308 for (i = 0; i < words; i++)
1309 fxp_eeprom_putword(sc, offset + i, data[i]);
1313 fxp_load_eeprom(struct fxp_softc *sc)
1318 fxp_read_eeprom(sc, sc->eeprom, 0, 1 << sc->eeprom_size);
1320 for (i = 0; i < (1 << sc->eeprom_size) - 1; i++)
1321 cksum += sc->eeprom[i];
1322 cksum = 0xBABA - cksum;
1323 if (cksum != sc->eeprom[(1 << sc->eeprom_size) - 1])
1324 device_printf(sc->dev,
1325 "EEPROM checksum mismatch! (0x%04x -> 0x%04x)\n",
1326 cksum, sc->eeprom[(1 << sc->eeprom_size) - 1]);
1330 * Grab the softc lock and call the real fxp_start_body() routine
1335 struct fxp_softc *sc = if_getsoftc(ifp);
1338 fxp_start_body(ifp);
1343 * Start packet transmission on the interface.
1344 * This routine must be called with the softc lock held, and is an
1345 * internal entry point only.
1348 fxp_start_body(if_t ifp)
1350 struct fxp_softc *sc = if_getsoftc(ifp);
1351 struct mbuf *mb_head;
1354 FXP_LOCK_ASSERT(sc, MA_OWNED);
1356 if ((if_getdrvflags(ifp) & (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) !=
1360 if (sc->tx_queued > FXP_NTXCB_HIWAT)
1363 * We're finished if there is nothing more to add to the list or if
1364 * we're all filled up with buffers to transmit.
1365 * NOTE: One TxCB is reserved to guarantee that fxp_mc_setup() can add
1366 * a NOP command when needed.
1369 while (!if_sendq_empty(ifp) && sc->tx_queued < FXP_NTXCB - 1) {
1372 * Grab a packet to transmit.
1374 mb_head = if_dequeue(ifp);
1375 if (mb_head == NULL)
1378 if (fxp_encap(sc, &mb_head)) {
1379 if (mb_head == NULL)
1381 if_sendq_prepend(ifp, mb_head);
1382 if_setdrvflagbits(ifp, IFF_DRV_OACTIVE, 0);
1386 * Pass packet to bpf if there is a listener.
1388 if_bpfmtap(ifp, mb_head);
1392 * We're finished. If we added to the list, issue a RESUME to get DMA
1393 * going again if suspended.
1396 bus_dmamap_sync(sc->cbl_tag, sc->cbl_map,
1397 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
1399 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_RESUME);
1401 * Set a 5 second timer just in case we don't hear
1402 * from the card again.
1404 sc->watchdog_timer = 5;
1409 fxp_encap(struct fxp_softc *sc, struct mbuf **m_head)
1414 struct fxp_cb_tx *cbp;
1416 bus_dma_segment_t segs[FXP_NTXSEG];
1417 int error, i, nseg, tcp_payload;
1419 FXP_LOCK_ASSERT(sc, MA_OWNED);
1425 * Get pointer to next available tx desc.
1427 txp = sc->fxp_desc.tx_last->tx_next;
1430 * A note in Appendix B of the Intel 8255x 10/100 Mbps
1431 * Ethernet Controller Family Open Source Software
1432 * Developer Manual says:
1433 * Using software parsing is only allowed with legal
1434 * TCP/IP or UDP/IP packets.
1436 * For all other datagrams, hardware parsing must
1438 * Software parsing appears to truncate ICMP and
1439 * fragmented UDP packets that contain one to three
1440 * bytes in the second (and final) mbuf of the packet.
1442 if (sc->flags & FXP_FLAG_EXT_RFA)
1443 txp->tx_cb->ipcb_ip_activation_high =
1444 FXP_IPCB_HARDWAREPARSING_ENABLE;
1447 if (m->m_pkthdr.csum_flags & CSUM_TSO) {
1449 * 82550/82551 requires ethernet/IP/TCP headers must be
1450 * contained in the first active transmit buffer.
1452 struct ether_header *eh;
1454 uint32_t ip_off, poff;
1456 if (M_WRITABLE(*m_head) == 0) {
1457 /* Get a writable copy. */
1458 m = m_dup(*m_head, M_NOWAIT);
1466 ip_off = sizeof(struct ether_header);
1467 m = m_pullup(*m_head, ip_off);
1472 eh = mtod(m, struct ether_header *);
1473 /* Check the existence of VLAN tag. */
1474 if (eh->ether_type == htons(ETHERTYPE_VLAN)) {
1475 ip_off = sizeof(struct ether_vlan_header);
1476 m = m_pullup(m, ip_off);
1482 m = m_pullup(m, ip_off + sizeof(struct ip));
1487 ip = (struct ip *)(mtod(m, char *) + ip_off);
1488 poff = ip_off + (ip->ip_hl << 2);
1489 m = m_pullup(m, poff + sizeof(struct tcphdr));
1494 tcp = (struct tcphdr *)(mtod(m, char *) + poff);
1495 m = m_pullup(m, poff + (tcp->th_off << 2));
1502 * Since 82550/82551 doesn't modify IP length and pseudo
1503 * checksum in the first frame driver should compute it.
1505 ip = (struct ip *)(mtod(m, char *) + ip_off);
1506 tcp = (struct tcphdr *)(mtod(m, char *) + poff);
1508 ip->ip_len = htons(m->m_pkthdr.tso_segsz + (ip->ip_hl << 2) +
1509 (tcp->th_off << 2));
1510 tcp->th_sum = in_pseudo(ip->ip_src.s_addr, ip->ip_dst.s_addr,
1511 htons(IPPROTO_TCP + (tcp->th_off << 2) +
1512 m->m_pkthdr.tso_segsz));
1513 /* Compute total TCP payload. */
1514 tcp_payload = m->m_pkthdr.len - ip_off - (ip->ip_hl << 2);
1515 tcp_payload -= tcp->th_off << 2;
1517 } else if (m->m_pkthdr.csum_flags & FXP_CSUM_FEATURES) {
1519 * Deal with TCP/IP checksum offload. Note that
1520 * in order for TCP checksum offload to work,
1521 * the pseudo header checksum must have already
1522 * been computed and stored in the checksum field
1523 * in the TCP header. The stack should have
1524 * already done this for us.
1526 txp->tx_cb->ipcb_ip_schedule = FXP_IPCB_TCPUDP_CHECKSUM_ENABLE;
1527 if (m->m_pkthdr.csum_flags & CSUM_TCP)
1528 txp->tx_cb->ipcb_ip_schedule |= FXP_IPCB_TCP_PACKET;
1530 #ifdef FXP_IP_CSUM_WAR
1532 * XXX The 82550 chip appears to have trouble
1533 * dealing with IP header checksums in very small
1534 * datagrams, namely fragments from 1 to 3 bytes
1535 * in size. For example, say you want to transmit
1536 * a UDP packet of 1473 bytes. The packet will be
1537 * fragmented over two IP datagrams, the latter
1538 * containing only one byte of data. The 82550 will
1539 * botch the header checksum on the 1-byte fragment.
1540 * As long as the datagram contains 4 or more bytes
1541 * of data, you're ok.
1543 * The following code attempts to work around this
1544 * problem: if the datagram is less than 38 bytes
1545 * in size (14 bytes ether header, 20 bytes IP header,
1546 * plus 4 bytes of data), we punt and compute the IP
1547 * header checksum by hand. This workaround doesn't
1548 * work very well, however, since it can be fooled
1549 * by things like VLAN tags and IP options that make
1550 * the header sizes/offsets vary.
1553 if (m->m_pkthdr.csum_flags & CSUM_IP) {
1554 if (m->m_pkthdr.len < 38) {
1556 m->m_data += ETHER_HDR_LEN;
1557 ip = mtod(m, struct ip *);
1558 ip->ip_sum = in_cksum(m, ip->ip_hl << 2);
1559 m->m_data -= ETHER_HDR_LEN;
1560 m->m_pkthdr.csum_flags &= ~CSUM_IP;
1562 txp->tx_cb->ipcb_ip_activation_high =
1563 FXP_IPCB_HARDWAREPARSING_ENABLE;
1564 txp->tx_cb->ipcb_ip_schedule |=
1565 FXP_IPCB_IP_CHECKSUM_ENABLE;
1571 error = bus_dmamap_load_mbuf_sg(sc->fxp_txmtag, txp->tx_map, *m_head,
1573 if (error == EFBIG) {
1574 m = m_collapse(*m_head, M_NOWAIT, sc->maxtxseg);
1581 error = bus_dmamap_load_mbuf_sg(sc->fxp_txmtag, txp->tx_map,
1582 *m_head, segs, &nseg, 0);
1588 } else if (error != 0)
1596 KASSERT(nseg <= sc->maxtxseg, ("too many DMA segments"));
1597 bus_dmamap_sync(sc->fxp_txmtag, txp->tx_map, BUS_DMASYNC_PREWRITE);
1600 for (i = 0; i < nseg; i++) {
1602 * If this is an 82550/82551, then we're using extended
1603 * TxCBs _and_ we're using checksum offload. This means
1604 * that the TxCB is really an IPCB. One major difference
1605 * between the two is that with plain extended TxCBs,
1606 * the bottom half of the TxCB contains two entries from
1607 * the TBD array, whereas IPCBs contain just one entry:
1608 * one entry (8 bytes) has been sacrificed for the TCP/IP
1609 * checksum offload control bits. So to make things work
1610 * right, we have to start filling in the TBD array
1611 * starting from a different place depending on whether
1612 * the chip is an 82550/82551 or not.
1614 if (sc->flags & FXP_FLAG_EXT_RFA) {
1615 cbp->tbd[i + 1].tb_addr = htole32(segs[i].ds_addr);
1616 cbp->tbd[i + 1].tb_size = htole32(segs[i].ds_len);
1618 cbp->tbd[i].tb_addr = htole32(segs[i].ds_addr);
1619 cbp->tbd[i].tb_size = htole32(segs[i].ds_len);
1622 if (sc->flags & FXP_FLAG_EXT_RFA) {
1623 /* Configure dynamic TBD for 82550/82551. */
1624 cbp->tbd_number = 0xFF;
1625 cbp->tbd[nseg].tb_size |= htole32(0x8000);
1627 cbp->tbd_number = nseg;
1628 /* Configure TSO. */
1629 if (m->m_pkthdr.csum_flags & CSUM_TSO) {
1630 cbp->tbd[-1].tb_size = htole32(m->m_pkthdr.tso_segsz << 16);
1631 cbp->tbd[1].tb_size |= htole32(tcp_payload << 16);
1632 cbp->ipcb_ip_schedule |= FXP_IPCB_LARGESEND_ENABLE |
1633 FXP_IPCB_IP_CHECKSUM_ENABLE |
1634 FXP_IPCB_TCP_PACKET |
1635 FXP_IPCB_TCPUDP_CHECKSUM_ENABLE;
1637 /* Configure VLAN hardware tag insertion. */
1638 if ((m->m_flags & M_VLANTAG) != 0) {
1639 cbp->ipcb_vlan_id = htons(m->m_pkthdr.ether_vtag);
1640 txp->tx_cb->ipcb_ip_activation_high |=
1641 FXP_IPCB_INSERTVLAN_ENABLE;
1645 txp->tx_cb->cb_status = 0;
1646 txp->tx_cb->byte_count = 0;
1647 if (sc->tx_queued != FXP_CXINT_THRESH - 1)
1648 txp->tx_cb->cb_command =
1649 htole16(sc->tx_cmd | FXP_CB_COMMAND_SF |
1652 txp->tx_cb->cb_command =
1653 htole16(sc->tx_cmd | FXP_CB_COMMAND_SF |
1654 FXP_CB_COMMAND_S | FXP_CB_COMMAND_I);
1655 if ((m->m_pkthdr.csum_flags & CSUM_TSO) == 0)
1656 txp->tx_cb->tx_threshold = tx_threshold;
1659 * Advance the end of list forward.
1661 sc->fxp_desc.tx_last->tx_cb->cb_command &= htole16(~FXP_CB_COMMAND_S);
1662 sc->fxp_desc.tx_last = txp;
1665 * Advance the beginning of the list forward if there are
1666 * no other packets queued (when nothing is queued, tx_first
1667 * sits on the last TxCB that was sent out).
1669 if (sc->tx_queued == 0)
1670 sc->fxp_desc.tx_first = txp;
1677 #ifdef DEVICE_POLLING
1678 static poll_handler_t fxp_poll;
1681 fxp_poll(if_t ifp, enum poll_cmd cmd, int count)
1683 struct fxp_softc *sc = if_getsoftc(ifp);
1688 if (!(if_getdrvflags(ifp) & IFF_DRV_RUNNING)) {
1693 statack = FXP_SCB_STATACK_CXTNO | FXP_SCB_STATACK_CNA |
1695 if (cmd == POLL_AND_CHECK_STATUS) {
1698 tmp = CSR_READ_1(sc, FXP_CSR_SCB_STATACK);
1699 if (tmp == 0xff || tmp == 0) {
1701 return (rx_npkts); /* nothing to do */
1704 /* ack what we can */
1706 CSR_WRITE_1(sc, FXP_CSR_SCB_STATACK, tmp);
1709 rx_npkts = fxp_intr_body(sc, ifp, statack, count);
1713 #endif /* DEVICE_POLLING */
1716 * Process interface interrupts.
1721 struct fxp_softc *sc = xsc;
1726 if (sc->suspended) {
1731 #ifdef DEVICE_POLLING
1732 if (if_getcapenable(ifp) & IFCAP_POLLING) {
1737 while ((statack = CSR_READ_1(sc, FXP_CSR_SCB_STATACK)) != 0) {
1739 * It should not be possible to have all bits set; the
1740 * FXP_SCB_INTR_SWI bit always returns 0 on a read. If
1741 * all bits are set, this may indicate that the card has
1742 * been physically ejected, so ignore it.
1744 if (statack == 0xff) {
1750 * First ACK all the interrupts in this pass.
1752 CSR_WRITE_1(sc, FXP_CSR_SCB_STATACK, statack);
1753 if ((if_getdrvflags(ifp) & IFF_DRV_RUNNING) != 0)
1754 fxp_intr_body(sc, ifp, statack, -1);
1760 fxp_txeof(struct fxp_softc *sc)
1766 bus_dmamap_sync(sc->cbl_tag, sc->cbl_map,
1767 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
1768 for (txp = sc->fxp_desc.tx_first; sc->tx_queued &&
1769 (le16toh(txp->tx_cb->cb_status) & FXP_CB_STATUS_C) != 0;
1770 txp = txp->tx_next) {
1771 if (txp->tx_mbuf != NULL) {
1772 bus_dmamap_sync(sc->fxp_txmtag, txp->tx_map,
1773 BUS_DMASYNC_POSTWRITE);
1774 bus_dmamap_unload(sc->fxp_txmtag, txp->tx_map);
1775 m_freem(txp->tx_mbuf);
1776 txp->tx_mbuf = NULL;
1777 /* clear this to reset csum offload bits */
1778 txp->tx_cb->tbd[0].tb_addr = 0;
1781 if_setdrvflagbits(ifp, 0, IFF_DRV_OACTIVE);
1783 sc->fxp_desc.tx_first = txp;
1784 bus_dmamap_sync(sc->cbl_tag, sc->cbl_map,
1785 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
1786 if (sc->tx_queued == 0)
1787 sc->watchdog_timer = 0;
1791 fxp_rxcsum(struct fxp_softc *sc, if_t ifp, struct mbuf *m,
1792 uint16_t status, int pos)
1794 struct ether_header *eh;
1797 int32_t hlen, len, pktlen, temp32;
1798 uint16_t csum, *opts;
1800 if ((sc->flags & FXP_FLAG_82559_RXCSUM) == 0) {
1801 if ((status & FXP_RFA_STATUS_PARSE) != 0) {
1802 if (status & FXP_RFDX_CS_IP_CSUM_BIT_VALID)
1803 m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED;
1804 if (status & FXP_RFDX_CS_IP_CSUM_VALID)
1805 m->m_pkthdr.csum_flags |= CSUM_IP_VALID;
1806 if ((status & FXP_RFDX_CS_TCPUDP_CSUM_BIT_VALID) &&
1807 (status & FXP_RFDX_CS_TCPUDP_CSUM_VALID)) {
1808 m->m_pkthdr.csum_flags |= CSUM_DATA_VALID |
1810 m->m_pkthdr.csum_data = 0xffff;
1816 pktlen = m->m_pkthdr.len;
1817 if (pktlen < sizeof(struct ether_header) + sizeof(struct ip))
1819 eh = mtod(m, struct ether_header *);
1820 if (eh->ether_type != htons(ETHERTYPE_IP))
1822 ip = (struct ip *)(eh + 1);
1823 if (ip->ip_v != IPVERSION)
1826 hlen = ip->ip_hl << 2;
1827 pktlen -= sizeof(struct ether_header);
1828 if (hlen < sizeof(struct ip))
1830 if (ntohs(ip->ip_len) < hlen)
1832 if (ntohs(ip->ip_len) != pktlen)
1834 if (ip->ip_off & htons(IP_MF | IP_OFFMASK))
1835 return; /* can't handle fragmented packet */
1839 if (pktlen < (hlen + sizeof(struct tcphdr)))
1843 if (pktlen < (hlen + sizeof(struct udphdr)))
1845 uh = (struct udphdr *)((caddr_t)ip + hlen);
1846 if (uh->uh_sum == 0)
1847 return; /* no checksum */
1852 /* Extract computed checksum. */
1853 csum = be16dec(mtod(m, char *) + pos);
1854 /* checksum fixup for IP options */
1855 len = hlen - sizeof(struct ip);
1857 opts = (uint16_t *)(ip + 1);
1858 for (; len > 0; len -= sizeof(uint16_t), opts++) {
1859 temp32 = csum - *opts;
1860 temp32 = (temp32 >> 16) + (temp32 & 65535);
1861 csum = temp32 & 65535;
1864 m->m_pkthdr.csum_flags |= CSUM_DATA_VALID;
1865 m->m_pkthdr.csum_data = csum;
1869 fxp_intr_body(struct fxp_softc *sc, if_t ifp, uint8_t statack,
1874 struct fxp_rfa *rfa;
1875 int rnr = (statack & FXP_SCB_STATACK_RNR) ? 1 : 0;
1880 FXP_LOCK_ASSERT(sc, MA_OWNED);
1884 #ifdef DEVICE_POLLING
1885 /* Pick up a deferred RNR condition if `count' ran out last time. */
1886 if (sc->flags & FXP_FLAG_DEFERRED_RNR) {
1887 sc->flags &= ~FXP_FLAG_DEFERRED_RNR;
1893 * Free any finished transmit mbuf chains.
1895 * Handle the CNA event likt a CXTNO event. It used to
1896 * be that this event (control unit not ready) was not
1897 * encountered, but it is now with the SMPng modifications.
1898 * The exact sequence of events that occur when the interface
1899 * is brought up are different now, and if this event
1900 * goes unhandled, the configuration/rxfilter setup sequence
1901 * can stall for several seconds. The result is that no
1902 * packets go out onto the wire for about 5 to 10 seconds
1903 * after the interface is ifconfig'ed for the first time.
1905 if (statack & (FXP_SCB_STATACK_CXTNO | FXP_SCB_STATACK_CNA))
1909 * Try to start more packets transmitting.
1911 if (!if_sendq_empty(ifp))
1912 fxp_start_body(ifp);
1915 * Just return if nothing happened on the receive side.
1917 if (!rnr && (statack & FXP_SCB_STATACK_FR) == 0)
1921 * Process receiver interrupts. If a no-resource (RNR)
1922 * condition exists, get whatever packets we can and
1923 * re-start the receiver.
1925 * When using polling, we do not process the list to completion,
1926 * so when we get an RNR interrupt we must defer the restart
1927 * until we hit the last buffer with the C bit set.
1928 * If we run out of cycles and rfa_headm has the C bit set,
1929 * record the pending RNR in the FXP_FLAG_DEFERRED_RNR flag so
1930 * that the info will be used in the subsequent polling cycle.
1933 rxp = sc->fxp_desc.rx_head;
1935 rfa = (struct fxp_rfa *)(m->m_ext.ext_buf +
1936 RFA_ALIGNMENT_FUDGE);
1937 bus_dmamap_sync(sc->fxp_rxmtag, rxp->rx_map,
1938 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
1940 #ifdef DEVICE_POLLING /* loop at most count times if count >=0 */
1941 if (count >= 0 && count-- == 0) {
1943 /* Defer RNR processing until the next time. */
1944 sc->flags |= FXP_FLAG_DEFERRED_RNR;
1949 #endif /* DEVICE_POLLING */
1951 status = le16toh(rfa->rfa_status);
1952 if ((status & FXP_RFA_STATUS_C) == 0)
1955 if ((status & FXP_RFA_STATUS_RNR) != 0)
1958 * Advance head forward.
1960 sc->fxp_desc.rx_head = rxp->rx_next;
1963 * Add a new buffer to the receive chain.
1964 * If this fails, the old buffer is recycled
1967 if (fxp_new_rfabuf(sc, rxp) == 0) {
1971 * Fetch packet length (the top 2 bits of
1972 * actual_size are flags set by the controller
1973 * upon completion), and drop the packet in case
1974 * of bogus length or CRC errors.
1976 total_len = le16toh(rfa->actual_size) & 0x3fff;
1977 if ((sc->flags & FXP_FLAG_82559_RXCSUM) != 0 &&
1978 (if_getcapenable(ifp) & IFCAP_RXCSUM) != 0) {
1979 /* Adjust for appended checksum bytes. */
1982 if (total_len < (int)sizeof(struct ether_header) ||
1983 total_len > (MCLBYTES - RFA_ALIGNMENT_FUDGE -
1985 status & (FXP_RFA_STATUS_CRC |
1986 FXP_RFA_STATUS_ALIGN | FXP_RFA_STATUS_OVERRUN)) {
1988 fxp_add_rfabuf(sc, rxp);
1992 m->m_pkthdr.len = m->m_len = total_len;
1993 if_setrcvif(m, ifp);
1995 /* Do IP checksum checking. */
1996 if ((if_getcapenable(ifp) & IFCAP_RXCSUM) != 0)
1997 fxp_rxcsum(sc, ifp, m, status, total_len);
1998 if ((if_getcapenable(ifp) & IFCAP_VLAN_HWTAGGING) != 0 &&
1999 (status & FXP_RFA_STATUS_VLAN) != 0) {
2000 m->m_pkthdr.ether_vtag =
2001 ntohs(rfa->rfax_vlan_id);
2002 m->m_flags |= M_VLANTAG;
2005 * Drop locks before calling if_input() since it
2006 * may re-enter fxp_start() in the netisr case.
2007 * This would result in a lock reversal. Better
2008 * performance might be obtained by chaining all
2009 * packets received, dropping the lock, and then
2010 * calling if_input() on each one.
2016 if ((if_getdrvflags(ifp) & IFF_DRV_RUNNING) == 0)
2019 /* Reuse RFA and loaded DMA map. */
2020 if_inc_counter(ifp, IFCOUNTER_IQDROPS, 1);
2021 fxp_discard_rfabuf(sc, rxp);
2023 fxp_add_rfabuf(sc, rxp);
2027 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL,
2028 sc->fxp_desc.rx_head->rx_addr);
2029 fxp_scb_cmd(sc, FXP_SCB_COMMAND_RU_START);
2035 fxp_update_stats(struct fxp_softc *sc)
2038 struct fxp_stats *sp = sc->fxp_stats;
2039 struct fxp_hwstats *hsp;
2042 FXP_LOCK_ASSERT(sc, MA_OWNED);
2044 bus_dmamap_sync(sc->fxp_stag, sc->fxp_smap,
2045 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
2046 /* Update statistical counters. */
2047 if (sc->revision >= FXP_REV_82559_A0)
2048 status = &sp->completion_status;
2049 else if (sc->revision >= FXP_REV_82558_A4)
2050 status = (uint32_t *)&sp->tx_tco;
2052 status = &sp->tx_pause;
2053 if (*status == htole32(FXP_STATS_DR_COMPLETE)) {
2054 hsp = &sc->fxp_hwstats;
2055 hsp->tx_good += le32toh(sp->tx_good);
2056 hsp->tx_maxcols += le32toh(sp->tx_maxcols);
2057 hsp->tx_latecols += le32toh(sp->tx_latecols);
2058 hsp->tx_underruns += le32toh(sp->tx_underruns);
2059 hsp->tx_lostcrs += le32toh(sp->tx_lostcrs);
2060 hsp->tx_deffered += le32toh(sp->tx_deffered);
2061 hsp->tx_single_collisions += le32toh(sp->tx_single_collisions);
2062 hsp->tx_multiple_collisions +=
2063 le32toh(sp->tx_multiple_collisions);
2064 hsp->tx_total_collisions += le32toh(sp->tx_total_collisions);
2065 hsp->rx_good += le32toh(sp->rx_good);
2066 hsp->rx_crc_errors += le32toh(sp->rx_crc_errors);
2067 hsp->rx_alignment_errors += le32toh(sp->rx_alignment_errors);
2068 hsp->rx_rnr_errors += le32toh(sp->rx_rnr_errors);
2069 hsp->rx_overrun_errors += le32toh(sp->rx_overrun_errors);
2070 hsp->rx_cdt_errors += le32toh(sp->rx_cdt_errors);
2071 hsp->rx_shortframes += le32toh(sp->rx_shortframes);
2072 hsp->tx_pause += le32toh(sp->tx_pause);
2073 hsp->rx_pause += le32toh(sp->rx_pause);
2074 hsp->rx_controls += le32toh(sp->rx_controls);
2075 hsp->tx_tco += le16toh(sp->tx_tco);
2076 hsp->rx_tco += le16toh(sp->rx_tco);
2078 if_inc_counter(ifp, IFCOUNTER_OPACKETS, le32toh(sp->tx_good));
2079 if_inc_counter(ifp, IFCOUNTER_COLLISIONS,
2080 le32toh(sp->tx_total_collisions));
2082 if_inc_counter(ifp, IFCOUNTER_IPACKETS,
2083 le32toh(sp->rx_good));
2084 sc->rx_idle_secs = 0;
2085 } else if (sc->flags & FXP_FLAG_RXBUG) {
2087 * Receiver's been idle for another second.
2091 if_inc_counter(ifp, IFCOUNTER_IERRORS,
2092 le32toh(sp->rx_crc_errors) +
2093 le32toh(sp->rx_alignment_errors) +
2094 le32toh(sp->rx_rnr_errors) +
2095 le32toh(sp->rx_overrun_errors));
2097 * If any transmit underruns occurred, bump up the transmit
2098 * threshold by another 512 bytes (64 * 8).
2100 if (sp->tx_underruns) {
2101 if_inc_counter(ifp, IFCOUNTER_OERRORS,
2102 le32toh(sp->tx_underruns));
2103 if (tx_threshold < 192)
2107 bus_dmamap_sync(sc->fxp_stag, sc->fxp_smap,
2108 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
2113 * Update packet in/out/collision statistics. The i82557 doesn't
2114 * allow you to access these counters without doing a fairly
2115 * expensive DMA to get _all_ of the statistics it maintains, so
2116 * we do this operation here only once per second. The statistics
2117 * counters in the kernel are updated from the previous dump-stats
2118 * DMA and then a new dump-stats DMA is started. The on-chip
2119 * counters are zeroed when the DMA completes. If we can't start
2120 * the DMA immediately, we don't wait - we just prepare to read
2121 * them again next time.
2126 struct fxp_softc *sc = xsc;
2129 FXP_LOCK_ASSERT(sc, MA_OWNED);
2131 /* Update statistical counters. */
2132 fxp_update_stats(sc);
2135 * Release any xmit buffers that have completed DMA. This isn't
2136 * strictly necessary to do here, but it's advantagous for mbufs
2137 * with external storage to be released in a timely manner rather
2138 * than being defered for a potentially long time. This limits
2139 * the delay to a maximum of one second.
2144 * If we haven't received any packets in FXP_MAC_RX_IDLE seconds,
2145 * then assume the receiver has locked up and attempt to clear
2146 * the condition by reprogramming the multicast filter. This is
2147 * a work-around for a bug in the 82557 where the receiver locks
2148 * up if it gets certain types of garbage in the synchronization
2149 * bits prior to the packet header. This bug is supposed to only
2150 * occur in 10Mbps mode, but has been seen to occur in 100Mbps
2151 * mode as well (perhaps due to a 10/100 speed transition).
2153 if (sc->rx_idle_secs > FXP_MAX_RX_IDLE) {
2154 sc->rx_idle_secs = 0;
2155 if ((if_getdrvflags(ifp) & IFF_DRV_RUNNING) != 0) {
2156 if_setdrvflagbits(ifp, 0, IFF_DRV_RUNNING);
2157 fxp_init_body(sc, 1);
2162 * If there is no pending command, start another stats
2163 * dump. Otherwise punt for now.
2165 if (CSR_READ_1(sc, FXP_CSR_SCB_COMMAND) == 0) {
2167 * Start another stats dump.
2169 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_DUMPRESET);
2171 if (sc->miibus != NULL)
2172 mii_tick(device_get_softc(sc->miibus));
2175 * Check that chip hasn't hung.
2180 * Schedule another timeout one second from now.
2182 callout_reset(&sc->stat_ch, hz, fxp_tick, sc);
2186 * Stop the interface. Cancels the statistics updater and resets
2190 fxp_stop(struct fxp_softc *sc)
2196 if_setdrvflagbits(ifp, 0, (IFF_DRV_RUNNING | IFF_DRV_OACTIVE));
2197 sc->watchdog_timer = 0;
2200 * Cancel stats updater.
2202 callout_stop(&sc->stat_ch);
2205 * Preserve PCI configuration, configure, IA/multicast
2206 * setup and put RU and CU into idle state.
2208 CSR_WRITE_4(sc, FXP_CSR_PORT, FXP_PORT_SELECTIVE_RESET);
2210 /* Disable interrupts. */
2211 CSR_WRITE_1(sc, FXP_CSR_SCB_INTRCNTL, FXP_SCB_INTR_DISABLE);
2213 fxp_update_stats(sc);
2216 * Release any xmit buffers.
2218 txp = sc->fxp_desc.tx_list;
2219 for (i = 0; i < FXP_NTXCB; i++) {
2220 if (txp[i].tx_mbuf != NULL) {
2221 bus_dmamap_sync(sc->fxp_txmtag, txp[i].tx_map,
2222 BUS_DMASYNC_POSTWRITE);
2223 bus_dmamap_unload(sc->fxp_txmtag, txp[i].tx_map);
2224 m_freem(txp[i].tx_mbuf);
2225 txp[i].tx_mbuf = NULL;
2226 /* clear this to reset csum offload bits */
2227 txp[i].tx_cb->tbd[0].tb_addr = 0;
2230 bus_dmamap_sync(sc->cbl_tag, sc->cbl_map,
2231 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
2236 * Watchdog/transmission transmit timeout handler. Called when a
2237 * transmission is started on the interface, but no interrupt is
2238 * received before the timeout. This usually indicates that the
2239 * card has wedged for some reason.
2242 fxp_watchdog(struct fxp_softc *sc)
2246 FXP_LOCK_ASSERT(sc, MA_OWNED);
2248 if (sc->watchdog_timer == 0 || --sc->watchdog_timer)
2251 device_printf(sc->dev, "device timeout\n");
2252 if_inc_counter(ifp, IFCOUNTER_OERRORS, 1);
2254 if_setdrvflagbits(ifp, 0, IFF_DRV_RUNNING);
2255 fxp_init_body(sc, 1);
2259 * Acquire locks and then call the real initialization function. This
2260 * is necessary because ether_ioctl() calls if_init() and this would
2261 * result in mutex recursion if the mutex was held.
2266 struct fxp_softc *sc = xsc;
2269 fxp_init_body(sc, 1);
2274 * Perform device initialization. This routine must be called with the
2278 fxp_init_body(struct fxp_softc *sc, int setmedia)
2281 struct mii_data *mii;
2282 struct fxp_cb_config *cbp;
2283 struct fxp_cb_ias *cb_ias;
2284 struct fxp_cb_tx *tcbp;
2288 FXP_LOCK_ASSERT(sc, MA_OWNED);
2290 if (if_getdrvflags(ifp) & IFF_DRV_RUNNING)
2294 * Cancel any pending I/O
2299 * Issue software reset, which also unloads the microcode.
2301 sc->flags &= ~FXP_FLAG_UCODE;
2302 CSR_WRITE_4(sc, FXP_CSR_PORT, FXP_PORT_SOFTWARE_RESET);
2305 prm = (if_getflags(ifp) & IFF_PROMISC) ? 1 : 0;
2308 * Initialize base of CBL and RFA memory. Loading with zero
2309 * sets it up for regular linear addressing.
2311 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, 0);
2312 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_BASE);
2315 fxp_scb_cmd(sc, FXP_SCB_COMMAND_RU_BASE);
2318 * Initialize base of dump-stats buffer.
2321 bzero(sc->fxp_stats, sizeof(struct fxp_stats));
2322 bus_dmamap_sync(sc->fxp_stag, sc->fxp_smap,
2323 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
2324 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, sc->stats_addr);
2325 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_DUMP_ADR);
2328 * Attempt to load microcode if requested.
2329 * For ICH based controllers do not load microcode.
2331 if (sc->ident->ich == 0) {
2332 if (if_getflags(ifp) & IFF_LINK0 &&
2333 (sc->flags & FXP_FLAG_UCODE) == 0)
2338 * Set IFF_ALLMULTI status. It's needed in configure action
2344 * We temporarily use memory that contains the TxCB list to
2345 * construct the config CB. The TxCB list memory is rebuilt
2348 cbp = (struct fxp_cb_config *)sc->fxp_desc.cbl_list;
2351 * This bcopy is kind of disgusting, but there are a bunch of must be
2352 * zero and must be one bits in this structure and this is the easiest
2353 * way to initialize them all to proper values.
2355 bcopy(fxp_cb_config_template, cbp, sizeof(fxp_cb_config_template));
2358 cbp->cb_command = htole16(FXP_CB_COMMAND_CONFIG |
2360 cbp->link_addr = 0xffffffff; /* (no) next command */
2361 cbp->byte_count = sc->flags & FXP_FLAG_EXT_RFA ? 32 : 22;
2362 cbp->rx_fifo_limit = 8; /* rx fifo threshold (32 bytes) */
2363 cbp->tx_fifo_limit = 0; /* tx fifo threshold (0 bytes) */
2364 cbp->adaptive_ifs = 0; /* (no) adaptive interframe spacing */
2365 cbp->mwi_enable = sc->flags & FXP_FLAG_MWI_ENABLE ? 1 : 0;
2366 cbp->type_enable = 0; /* actually reserved */
2367 cbp->read_align_en = sc->flags & FXP_FLAG_READ_ALIGN ? 1 : 0;
2368 cbp->end_wr_on_cl = sc->flags & FXP_FLAG_WRITE_ALIGN ? 1 : 0;
2369 cbp->rx_dma_bytecount = 0; /* (no) rx DMA max */
2370 cbp->tx_dma_bytecount = 0; /* (no) tx DMA max */
2371 cbp->dma_mbce = 0; /* (disable) dma max counters */
2372 cbp->late_scb = 0; /* (don't) defer SCB update */
2373 cbp->direct_dma_dis = 1; /* disable direct rcv dma mode */
2374 cbp->tno_int_or_tco_en =0; /* (disable) tx not okay interrupt */
2375 cbp->ci_int = 1; /* interrupt on CU idle */
2376 cbp->ext_txcb_dis = sc->flags & FXP_FLAG_EXT_TXCB ? 0 : 1;
2377 cbp->ext_stats_dis = 1; /* disable extended counters */
2378 cbp->keep_overrun_rx = 0; /* don't pass overrun frames to host */
2379 cbp->save_bf = sc->flags & FXP_FLAG_SAVE_BAD ? 1 : prm;
2380 cbp->disc_short_rx = !prm; /* discard short packets */
2381 cbp->underrun_retry = 1; /* retry mode (once) on DMA underrun */
2382 cbp->two_frames = 0; /* do not limit FIFO to 2 frames */
2383 cbp->dyn_tbd = sc->flags & FXP_FLAG_EXT_RFA ? 1 : 0;
2384 cbp->ext_rfa = sc->flags & FXP_FLAG_EXT_RFA ? 1 : 0;
2385 cbp->mediatype = sc->flags & FXP_FLAG_SERIAL_MEDIA ? 0 : 1;
2386 cbp->csma_dis = 0; /* (don't) disable link */
2387 cbp->tcp_udp_cksum = ((sc->flags & FXP_FLAG_82559_RXCSUM) != 0 &&
2388 (if_getcapenable(ifp) & IFCAP_RXCSUM) != 0) ? 1 : 0;
2389 cbp->vlan_tco = 0; /* (don't) enable vlan wakeup */
2390 cbp->link_wake_en = 0; /* (don't) assert PME# on link change */
2391 cbp->arp_wake_en = 0; /* (don't) assert PME# on arp */
2392 cbp->mc_wake_en = 0; /* (don't) enable PME# on mcmatch */
2393 cbp->nsai = 1; /* (don't) disable source addr insert */
2394 cbp->preamble_length = 2; /* (7 byte) preamble */
2395 cbp->loopback = 0; /* (don't) loopback */
2396 cbp->linear_priority = 0; /* (normal CSMA/CD operation) */
2397 cbp->linear_pri_mode = 0; /* (wait after xmit only) */
2398 cbp->interfrm_spacing = 6; /* (96 bits of) interframe spacing */
2399 cbp->promiscuous = prm; /* promiscuous mode */
2400 cbp->bcast_disable = 0; /* (don't) disable broadcasts */
2401 cbp->wait_after_win = 0; /* (don't) enable modified backoff alg*/
2402 cbp->ignore_ul = 0; /* consider U/L bit in IA matching */
2403 cbp->crc16_en = 0; /* (don't) enable crc-16 algorithm */
2404 cbp->crscdt = sc->flags & FXP_FLAG_SERIAL_MEDIA ? 1 : 0;
2406 cbp->stripping = !prm; /* truncate rx packet to byte count */
2407 cbp->padding = 1; /* (do) pad short tx packets */
2408 cbp->rcv_crc_xfer = 0; /* (don't) xfer CRC to host */
2409 cbp->long_rx_en = sc->flags & FXP_FLAG_LONG_PKT_EN ? 1 : 0;
2410 cbp->ia_wake_en = 0; /* (don't) wake up on address match */
2411 cbp->magic_pkt_dis = sc->flags & FXP_FLAG_WOL ? 0 : 1;
2412 cbp->force_fdx = 0; /* (don't) force full duplex */
2413 cbp->fdx_pin_en = 1; /* (enable) FDX# pin */
2414 cbp->multi_ia = 0; /* (don't) accept multiple IAs */
2415 cbp->mc_all = if_getflags(ifp) & IFF_ALLMULTI ? 1 : prm;
2416 cbp->gamla_rx = sc->flags & FXP_FLAG_EXT_RFA ? 1 : 0;
2417 cbp->vlan_strip_en = ((sc->flags & FXP_FLAG_EXT_RFA) != 0 &&
2418 (if_getcapenable(ifp) & IFCAP_VLAN_HWTAGGING) != 0) ? 1 : 0;
2420 if (sc->revision == FXP_REV_82557) {
2422 * The 82557 has no hardware flow control, the values
2423 * below are the defaults for the chip.
2425 cbp->fc_delay_lsb = 0;
2426 cbp->fc_delay_msb = 0x40;
2427 cbp->pri_fc_thresh = 3;
2429 cbp->rx_fc_restop = 0;
2430 cbp->rx_fc_restart = 0;
2432 cbp->pri_fc_loc = 1;
2434 /* Set pause RX FIFO threshold to 1KB. */
2435 CSR_WRITE_1(sc, FXP_CSR_FC_THRESH, 1);
2436 /* Set pause time. */
2437 cbp->fc_delay_lsb = 0xff;
2438 cbp->fc_delay_msb = 0xff;
2439 cbp->pri_fc_thresh = 3;
2440 mii = device_get_softc(sc->miibus);
2441 if ((IFM_OPTIONS(mii->mii_media_active) &
2442 IFM_ETH_TXPAUSE) != 0)
2443 /* enable transmit FC */
2446 /* disable transmit FC */
2448 if ((IFM_OPTIONS(mii->mii_media_active) &
2449 IFM_ETH_RXPAUSE) != 0) {
2450 /* enable FC restart/restop frames */
2451 cbp->rx_fc_restart = 1;
2452 cbp->rx_fc_restop = 1;
2454 /* disable FC restart/restop frames */
2455 cbp->rx_fc_restart = 0;
2456 cbp->rx_fc_restop = 0;
2458 cbp->fc_filter = !prm; /* drop FC frames to host */
2459 cbp->pri_fc_loc = 1; /* FC pri location (byte31) */
2462 /* Enable 82558 and 82559 extended statistics functionality. */
2463 if (sc->revision >= FXP_REV_82558_A4) {
2464 if (sc->revision >= FXP_REV_82559_A0) {
2466 * Extend configuration table size to 32
2467 * to include TCO configuration.
2469 cbp->byte_count = 32;
2470 cbp->ext_stats_dis = 1;
2471 /* Enable TCO stats. */
2472 cbp->tno_int_or_tco_en = 1;
2475 cbp->ext_stats_dis = 0;
2479 * Start the config command/DMA.
2482 bus_dmamap_sync(sc->cbl_tag, sc->cbl_map,
2483 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
2484 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, sc->fxp_desc.cbl_addr);
2485 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START);
2486 /* ...and wait for it to complete. */
2487 fxp_dma_wait(sc, &cbp->cb_status, sc->cbl_tag, sc->cbl_map);
2490 * Now initialize the station address. Temporarily use the TxCB
2491 * memory area like we did above for the config CB.
2493 cb_ias = (struct fxp_cb_ias *)sc->fxp_desc.cbl_list;
2494 cb_ias->cb_status = 0;
2495 cb_ias->cb_command = htole16(FXP_CB_COMMAND_IAS | FXP_CB_COMMAND_EL);
2496 cb_ias->link_addr = 0xffffffff;
2497 bcopy(if_getlladdr(sc->ifp), cb_ias->macaddr, ETHER_ADDR_LEN);
2500 * Start the IAS (Individual Address Setup) command/DMA.
2503 bus_dmamap_sync(sc->cbl_tag, sc->cbl_map,
2504 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
2505 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, sc->fxp_desc.cbl_addr);
2506 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START);
2507 /* ...and wait for it to complete. */
2508 fxp_dma_wait(sc, &cb_ias->cb_status, sc->cbl_tag, sc->cbl_map);
2511 * Initialize the multicast address list.
2516 * Initialize transmit control block (TxCB) list.
2518 txp = sc->fxp_desc.tx_list;
2519 tcbp = sc->fxp_desc.cbl_list;
2520 bzero(tcbp, FXP_TXCB_SZ);
2521 for (i = 0; i < FXP_NTXCB; i++) {
2522 txp[i].tx_mbuf = NULL;
2523 tcbp[i].cb_status = htole16(FXP_CB_STATUS_C | FXP_CB_STATUS_OK);
2524 tcbp[i].cb_command = htole16(FXP_CB_COMMAND_NOP);
2525 tcbp[i].link_addr = htole32(sc->fxp_desc.cbl_addr +
2526 (((i + 1) & FXP_TXCB_MASK) * sizeof(struct fxp_cb_tx)));
2527 if (sc->flags & FXP_FLAG_EXT_TXCB)
2528 tcbp[i].tbd_array_addr =
2529 htole32(FXP_TXCB_DMA_ADDR(sc, &tcbp[i].tbd[2]));
2531 tcbp[i].tbd_array_addr =
2532 htole32(FXP_TXCB_DMA_ADDR(sc, &tcbp[i].tbd[0]));
2533 txp[i].tx_next = &txp[(i + 1) & FXP_TXCB_MASK];
2536 * Set the suspend flag on the first TxCB and start the control
2537 * unit. It will execute the NOP and then suspend.
2539 tcbp->cb_command = htole16(FXP_CB_COMMAND_NOP | FXP_CB_COMMAND_S);
2540 bus_dmamap_sync(sc->cbl_tag, sc->cbl_map,
2541 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
2542 sc->fxp_desc.tx_first = sc->fxp_desc.tx_last = txp;
2546 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, sc->fxp_desc.cbl_addr);
2547 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START);
2550 * Initialize receiver buffer area - RFA.
2553 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, sc->fxp_desc.rx_head->rx_addr);
2554 fxp_scb_cmd(sc, FXP_SCB_COMMAND_RU_START);
2556 if (sc->miibus != NULL && setmedia != 0)
2557 mii_mediachg(device_get_softc(sc->miibus));
2559 if_setdrvflagbits(ifp, IFF_DRV_RUNNING, IFF_DRV_OACTIVE);
2562 * Enable interrupts.
2564 #ifdef DEVICE_POLLING
2566 * ... but only do that if we are not polling. And because (presumably)
2567 * the default is interrupts on, we need to disable them explicitly!
2569 if (if_getcapenable(ifp) & IFCAP_POLLING )
2570 CSR_WRITE_1(sc, FXP_CSR_SCB_INTRCNTL, FXP_SCB_INTR_DISABLE);
2572 #endif /* DEVICE_POLLING */
2573 CSR_WRITE_1(sc, FXP_CSR_SCB_INTRCNTL, 0);
2576 * Start stats updater.
2578 callout_reset(&sc->stat_ch, hz, fxp_tick, sc);
2582 fxp_serial_ifmedia_upd(if_t ifp)
2589 fxp_serial_ifmedia_sts(if_t ifp, struct ifmediareq *ifmr)
2592 ifmr->ifm_active = IFM_ETHER|IFM_MANUAL;
2596 * Change media according to request.
2599 fxp_ifmedia_upd(if_t ifp)
2601 struct fxp_softc *sc = if_getsoftc(ifp);
2602 struct mii_data *mii;
2603 struct mii_softc *miisc;
2605 mii = device_get_softc(sc->miibus);
2607 LIST_FOREACH(miisc, &mii->mii_phys, mii_list)
2615 * Notify the world which media we're using.
2618 fxp_ifmedia_sts(if_t ifp, struct ifmediareq *ifmr)
2620 struct fxp_softc *sc = if_getsoftc(ifp);
2621 struct mii_data *mii;
2623 mii = device_get_softc(sc->miibus);
2626 ifmr->ifm_active = mii->mii_media_active;
2627 ifmr->ifm_status = mii->mii_media_status;
2632 * Add a buffer to the end of the RFA buffer list.
2633 * Return 0 if successful, 1 for failure. A failure results in
2634 * reusing the RFA buffer.
2635 * The RFA struct is stuck at the beginning of mbuf cluster and the
2636 * data pointer is fixed up to point just past it.
2639 fxp_new_rfabuf(struct fxp_softc *sc, struct fxp_rx *rxp)
2642 struct fxp_rfa *rfa;
2643 bus_dmamap_t tmp_map;
2646 m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR);
2651 * Move the data pointer up so that the incoming data packet
2652 * will be 32-bit aligned.
2654 m->m_data += RFA_ALIGNMENT_FUDGE;
2657 * Get a pointer to the base of the mbuf cluster and move
2658 * data start past it.
2660 rfa = mtod(m, struct fxp_rfa *);
2661 m->m_data += sc->rfa_size;
2662 rfa->size = htole16(MCLBYTES - sc->rfa_size - RFA_ALIGNMENT_FUDGE);
2664 rfa->rfa_status = 0;
2665 rfa->rfa_control = htole16(FXP_RFA_CONTROL_EL);
2666 rfa->actual_size = 0;
2667 m->m_len = m->m_pkthdr.len = MCLBYTES - RFA_ALIGNMENT_FUDGE -
2671 * Initialize the rest of the RFA. Note that since the RFA
2672 * is misaligned, we cannot store values directly. We're thus
2673 * using the le32enc() function which handles endianness and
2674 * is also alignment-safe.
2676 le32enc(&rfa->link_addr, 0xffffffff);
2677 le32enc(&rfa->rbd_addr, 0xffffffff);
2679 /* Map the RFA into DMA memory. */
2680 error = bus_dmamap_load(sc->fxp_rxmtag, sc->spare_map, rfa,
2681 MCLBYTES - RFA_ALIGNMENT_FUDGE, fxp_dma_map_addr,
2682 &rxp->rx_addr, BUS_DMA_NOWAIT);
2688 if (rxp->rx_mbuf != NULL)
2689 bus_dmamap_unload(sc->fxp_rxmtag, rxp->rx_map);
2690 tmp_map = sc->spare_map;
2691 sc->spare_map = rxp->rx_map;
2692 rxp->rx_map = tmp_map;
2695 bus_dmamap_sync(sc->fxp_rxmtag, rxp->rx_map,
2696 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
2701 fxp_add_rfabuf(struct fxp_softc *sc, struct fxp_rx *rxp)
2703 struct fxp_rfa *p_rfa;
2704 struct fxp_rx *p_rx;
2707 * If there are other buffers already on the list, attach this
2708 * one to the end by fixing up the tail to point to this one.
2710 if (sc->fxp_desc.rx_head != NULL) {
2711 p_rx = sc->fxp_desc.rx_tail;
2712 p_rfa = (struct fxp_rfa *)
2713 (p_rx->rx_mbuf->m_ext.ext_buf + RFA_ALIGNMENT_FUDGE);
2714 p_rx->rx_next = rxp;
2715 le32enc(&p_rfa->link_addr, rxp->rx_addr);
2716 p_rfa->rfa_control = 0;
2717 bus_dmamap_sync(sc->fxp_rxmtag, p_rx->rx_map,
2718 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
2720 rxp->rx_next = NULL;
2721 sc->fxp_desc.rx_head = rxp;
2723 sc->fxp_desc.rx_tail = rxp;
2727 fxp_discard_rfabuf(struct fxp_softc *sc, struct fxp_rx *rxp)
2730 struct fxp_rfa *rfa;
2733 m->m_data = m->m_ext.ext_buf;
2735 * Move the data pointer up so that the incoming data packet
2736 * will be 32-bit aligned.
2738 m->m_data += RFA_ALIGNMENT_FUDGE;
2741 * Get a pointer to the base of the mbuf cluster and move
2742 * data start past it.
2744 rfa = mtod(m, struct fxp_rfa *);
2745 m->m_data += sc->rfa_size;
2746 rfa->size = htole16(MCLBYTES - sc->rfa_size - RFA_ALIGNMENT_FUDGE);
2748 rfa->rfa_status = 0;
2749 rfa->rfa_control = htole16(FXP_RFA_CONTROL_EL);
2750 rfa->actual_size = 0;
2753 * Initialize the rest of the RFA. Note that since the RFA
2754 * is misaligned, we cannot store values directly. We're thus
2755 * using the le32enc() function which handles endianness and
2756 * is also alignment-safe.
2758 le32enc(&rfa->link_addr, 0xffffffff);
2759 le32enc(&rfa->rbd_addr, 0xffffffff);
2761 bus_dmamap_sync(sc->fxp_rxmtag, rxp->rx_map,
2762 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
2766 fxp_miibus_readreg(device_t dev, int phy, int reg)
2768 struct fxp_softc *sc = device_get_softc(dev);
2772 CSR_WRITE_4(sc, FXP_CSR_MDICONTROL,
2773 (FXP_MDI_READ << 26) | (reg << 16) | (phy << 21));
2775 while (((value = CSR_READ_4(sc, FXP_CSR_MDICONTROL)) & 0x10000000) == 0
2780 device_printf(dev, "fxp_miibus_readreg: timed out\n");
2782 return (value & 0xffff);
2786 fxp_miibus_writereg(device_t dev, int phy, int reg, int value)
2788 struct fxp_softc *sc = device_get_softc(dev);
2791 CSR_WRITE_4(sc, FXP_CSR_MDICONTROL,
2792 (FXP_MDI_WRITE << 26) | (reg << 16) | (phy << 21) |
2795 while ((CSR_READ_4(sc, FXP_CSR_MDICONTROL) & 0x10000000) == 0 &&
2800 device_printf(dev, "fxp_miibus_writereg: timed out\n");
2805 fxp_miibus_statchg(device_t dev)
2807 struct fxp_softc *sc;
2808 struct mii_data *mii;
2811 sc = device_get_softc(dev);
2812 mii = device_get_softc(sc->miibus);
2814 if (mii == NULL || ifp == (void *)NULL ||
2815 (if_getdrvflags(ifp) & IFF_DRV_RUNNING) == 0 ||
2816 (mii->mii_media_status & (IFM_AVALID | IFM_ACTIVE)) !=
2817 (IFM_AVALID | IFM_ACTIVE))
2820 if (IFM_SUBTYPE(mii->mii_media_active) == IFM_10_T &&
2821 sc->flags & FXP_FLAG_CU_RESUME_BUG)
2822 sc->cu_resume_bug = 1;
2824 sc->cu_resume_bug = 0;
2826 * Call fxp_init_body in order to adjust the flow control settings.
2827 * Note that the 82557 doesn't support hardware flow control.
2829 if (sc->revision == FXP_REV_82557)
2831 if_setdrvflagbits(ifp, 0, IFF_DRV_RUNNING);
2832 fxp_init_body(sc, 0);
2836 fxp_ioctl(if_t ifp, u_long command, caddr_t data)
2838 struct fxp_softc *sc = if_getsoftc(ifp);
2839 struct ifreq *ifr = (struct ifreq *)data;
2840 struct mii_data *mii;
2841 int flag, mask, error = 0, reinit;
2847 * If interface is marked up and not running, then start it.
2848 * If it is marked down and running, stop it.
2849 * XXX If it's up then re-initialize it. This is so flags
2850 * such as IFF_PROMISC are handled.
2852 if (if_getflags(ifp) & IFF_UP) {
2853 if (((if_getdrvflags(ifp) & IFF_DRV_RUNNING) != 0) &&
2854 ((if_getflags(ifp) ^ sc->if_flags) &
2855 (IFF_PROMISC | IFF_ALLMULTI | IFF_LINK0)) != 0) {
2856 if_setdrvflagbits(ifp, 0, IFF_DRV_RUNNING);
2857 fxp_init_body(sc, 0);
2858 } else if ((if_getdrvflags(ifp) & IFF_DRV_RUNNING) == 0)
2859 fxp_init_body(sc, 1);
2861 if ((if_getdrvflags(ifp) & IFF_DRV_RUNNING) != 0)
2864 sc->if_flags = if_getflags(ifp);
2871 if ((if_getdrvflags(ifp) & IFF_DRV_RUNNING) != 0) {
2872 if_setdrvflagbits(ifp, 0, IFF_DRV_RUNNING);
2873 fxp_init_body(sc, 0);
2880 if (sc->miibus != NULL) {
2881 mii = device_get_softc(sc->miibus);
2882 error = ifmedia_ioctl(ifp, ifr,
2883 &mii->mii_media, command);
2885 error = ifmedia_ioctl(ifp, ifr, &sc->sc_media, command);
2891 mask = if_getcapenable(ifp) ^ ifr->ifr_reqcap;
2892 #ifdef DEVICE_POLLING
2893 if (mask & IFCAP_POLLING) {
2894 if (ifr->ifr_reqcap & IFCAP_POLLING) {
2895 error = ether_poll_register(fxp_poll, ifp);
2899 CSR_WRITE_1(sc, FXP_CSR_SCB_INTRCNTL,
2900 FXP_SCB_INTR_DISABLE);
2901 if_setcapenablebit(ifp, IFCAP_POLLING, 0);
2904 error = ether_poll_deregister(ifp);
2905 /* Enable interrupts in any case */
2907 CSR_WRITE_1(sc, FXP_CSR_SCB_INTRCNTL, 0);
2908 if_setcapenablebit(ifp, 0, IFCAP_POLLING);
2914 if ((mask & IFCAP_TXCSUM) != 0 &&
2915 (if_getcapabilities(ifp) & IFCAP_TXCSUM) != 0) {
2916 if_togglecapenable(ifp, IFCAP_TXCSUM);
2917 if ((if_getcapenable(ifp) & IFCAP_TXCSUM) != 0)
2918 if_sethwassistbits(ifp, FXP_CSUM_FEATURES, 0);
2920 if_sethwassistbits(ifp, 0, FXP_CSUM_FEATURES);
2922 if ((mask & IFCAP_RXCSUM) != 0 &&
2923 (if_getcapabilities(ifp) & IFCAP_RXCSUM) != 0) {
2924 if_togglecapenable(ifp, IFCAP_RXCSUM);
2925 if ((sc->flags & FXP_FLAG_82559_RXCSUM) != 0)
2928 if ((mask & IFCAP_TSO4) != 0 &&
2929 (if_getcapabilities(ifp) & IFCAP_TSO4) != 0) {
2930 if_togglecapenable(ifp, IFCAP_TSO4);
2931 if ((if_getcapenable(ifp) & IFCAP_TSO4) != 0)
2932 if_sethwassistbits(ifp, CSUM_TSO, 0);
2934 if_sethwassistbits(ifp, 0, CSUM_TSO);
2936 if ((mask & IFCAP_WOL_MAGIC) != 0 &&
2937 (if_getcapabilities(ifp) & IFCAP_WOL_MAGIC) != 0)
2938 if_togglecapenable(ifp, IFCAP_WOL_MAGIC);
2939 if ((mask & IFCAP_VLAN_MTU) != 0 &&
2940 (if_getcapabilities(ifp) & IFCAP_VLAN_MTU) != 0) {
2941 if_togglecapenable(ifp, IFCAP_VLAN_MTU);
2942 if (sc->revision != FXP_REV_82557)
2943 flag = FXP_FLAG_LONG_PKT_EN;
2944 else /* a hack to get long frames on the old chip */
2945 flag = FXP_FLAG_SAVE_BAD;
2947 if (if_getflags(ifp) & IFF_UP)
2950 if ((mask & IFCAP_VLAN_HWCSUM) != 0 &&
2951 (if_getcapabilities(ifp) & IFCAP_VLAN_HWCSUM) != 0)
2952 if_togglecapenable(ifp, IFCAP_VLAN_HWCSUM);
2953 if ((mask & IFCAP_VLAN_HWTSO) != 0 &&
2954 (if_getcapabilities(ifp) & IFCAP_VLAN_HWTSO) != 0)
2955 if_togglecapenable(ifp, IFCAP_VLAN_HWTSO);
2956 if ((mask & IFCAP_VLAN_HWTAGGING) != 0 &&
2957 (if_getcapabilities(ifp) & IFCAP_VLAN_HWTAGGING) != 0) {
2958 if_togglecapenable(ifp, IFCAP_VLAN_HWTAGGING);
2959 if ((if_getcapenable(ifp) & IFCAP_VLAN_HWTAGGING) == 0)
2960 if_setcapenablebit(ifp, 0, IFCAP_VLAN_HWTSO |
2965 (if_getdrvflags(ifp) & IFF_DRV_RUNNING) != 0) {
2966 if_setdrvflagbits(ifp, 0, IFF_DRV_RUNNING);
2967 fxp_init_body(sc, 0);
2974 error = ether_ioctl(ifp, command, data);
2980 * Fill in the multicast address list and return number of entries.
2983 fxp_mc_addrs(struct fxp_softc *sc)
2985 struct fxp_cb_mcs *mcsp = sc->mcsp;
2989 if ((if_getflags(ifp) & IFF_ALLMULTI) == 0) {
2990 if_maddr_rlock(ifp);
2991 if_setupmultiaddr(ifp, mcsp->mc_addr, &nmcasts, MAXMCADDR);
2992 if (nmcasts >= MAXMCADDR) {
2993 if_setflagbits(ifp, IFF_ALLMULTI, 0);
2996 if_maddr_runlock(ifp);
2998 mcsp->mc_cnt = htole16(nmcasts * ETHER_ADDR_LEN);
3003 * Program the multicast filter.
3005 * We have an artificial restriction that the multicast setup command
3006 * must be the first command in the chain, so we take steps to ensure
3007 * this. By requiring this, it allows us to keep up the performance of
3008 * the pre-initialized command ring (esp. link pointers) by not actually
3009 * inserting the mcsetup command in the ring - i.e. its link pointer
3010 * points to the TxCB ring, but the mcsetup descriptor itself is not part
3011 * of it. We then can do 'CU_START' on the mcsetup descriptor and have it
3012 * lead into the regular TxCB ring when it completes.
3015 fxp_mc_setup(struct fxp_softc *sc)
3017 struct fxp_cb_mcs *mcsp;
3020 FXP_LOCK_ASSERT(sc, MA_OWNED);
3023 mcsp->cb_status = 0;
3024 mcsp->cb_command = htole16(FXP_CB_COMMAND_MCAS | FXP_CB_COMMAND_EL);
3025 mcsp->link_addr = 0xffffffff;
3029 * Wait until command unit is idle. This should never be the
3030 * case when nothing is queued, but make sure anyway.
3033 while ((CSR_READ_1(sc, FXP_CSR_SCB_RUSCUS) >> 6) !=
3034 FXP_SCB_CUS_IDLE && --count)
3037 device_printf(sc->dev, "command queue timeout\n");
3042 * Start the multicast setup command.
3045 bus_dmamap_sync(sc->mcs_tag, sc->mcs_map,
3046 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
3047 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, sc->mcs_addr);
3048 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START);
3049 /* ...and wait for it to complete. */
3050 fxp_dma_wait(sc, &mcsp->cb_status, sc->mcs_tag, sc->mcs_map);
3053 static uint32_t fxp_ucode_d101a[] = D101_A_RCVBUNDLE_UCODE;
3054 static uint32_t fxp_ucode_d101b0[] = D101_B0_RCVBUNDLE_UCODE;
3055 static uint32_t fxp_ucode_d101ma[] = D101M_B_RCVBUNDLE_UCODE;
3056 static uint32_t fxp_ucode_d101s[] = D101S_RCVBUNDLE_UCODE;
3057 static uint32_t fxp_ucode_d102[] = D102_B_RCVBUNDLE_UCODE;
3058 static uint32_t fxp_ucode_d102c[] = D102_C_RCVBUNDLE_UCODE;
3059 static uint32_t fxp_ucode_d102e[] = D102_E_RCVBUNDLE_UCODE;
3061 #define UCODE(x) x, sizeof(x)/sizeof(uint32_t)
3063 static const struct ucode {
3067 u_short int_delay_offset;
3068 u_short bundle_max_offset;
3070 { FXP_REV_82558_A4, UCODE(fxp_ucode_d101a), D101_CPUSAVER_DWORD, 0 },
3071 { FXP_REV_82558_B0, UCODE(fxp_ucode_d101b0), D101_CPUSAVER_DWORD, 0 },
3072 { FXP_REV_82559_A0, UCODE(fxp_ucode_d101ma),
3073 D101M_CPUSAVER_DWORD, D101M_CPUSAVER_BUNDLE_MAX_DWORD },
3074 { FXP_REV_82559S_A, UCODE(fxp_ucode_d101s),
3075 D101S_CPUSAVER_DWORD, D101S_CPUSAVER_BUNDLE_MAX_DWORD },
3076 { FXP_REV_82550, UCODE(fxp_ucode_d102),
3077 D102_B_CPUSAVER_DWORD, D102_B_CPUSAVER_BUNDLE_MAX_DWORD },
3078 { FXP_REV_82550_C, UCODE(fxp_ucode_d102c),
3079 D102_C_CPUSAVER_DWORD, D102_C_CPUSAVER_BUNDLE_MAX_DWORD },
3080 { FXP_REV_82551_F, UCODE(fxp_ucode_d102e),
3081 D102_E_CPUSAVER_DWORD, D102_E_CPUSAVER_BUNDLE_MAX_DWORD },
3082 { FXP_REV_82551_10, UCODE(fxp_ucode_d102e),
3083 D102_E_CPUSAVER_DWORD, D102_E_CPUSAVER_BUNDLE_MAX_DWORD },
3084 { 0, NULL, 0, 0, 0 }
3088 fxp_load_ucode(struct fxp_softc *sc)
3090 const struct ucode *uc;
3091 struct fxp_cb_ucode *cbp;
3094 if (sc->flags & FXP_FLAG_NO_UCODE)
3097 for (uc = ucode_table; uc->ucode != NULL; uc++)
3098 if (sc->revision == uc->revision)
3100 if (uc->ucode == NULL)
3102 cbp = (struct fxp_cb_ucode *)sc->fxp_desc.cbl_list;
3104 cbp->cb_command = htole16(FXP_CB_COMMAND_UCODE | FXP_CB_COMMAND_EL);
3105 cbp->link_addr = 0xffffffff; /* (no) next command */
3106 for (i = 0; i < uc->length; i++)
3107 cbp->ucode[i] = htole32(uc->ucode[i]);
3108 if (uc->int_delay_offset)
3109 *(uint16_t *)&cbp->ucode[uc->int_delay_offset] =
3110 htole16(sc->tunable_int_delay + sc->tunable_int_delay / 2);
3111 if (uc->bundle_max_offset)
3112 *(uint16_t *)&cbp->ucode[uc->bundle_max_offset] =
3113 htole16(sc->tunable_bundle_max);
3115 * Download the ucode to the chip.
3118 bus_dmamap_sync(sc->cbl_tag, sc->cbl_map,
3119 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
3120 CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, sc->fxp_desc.cbl_addr);
3121 fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START);
3122 /* ...and wait for it to complete. */
3123 fxp_dma_wait(sc, &cbp->cb_status, sc->cbl_tag, sc->cbl_map);
3124 device_printf(sc->dev,
3125 "Microcode loaded, int_delay: %d usec bundle_max: %d\n",
3126 sc->tunable_int_delay,
3127 uc->bundle_max_offset == 0 ? 0 : sc->tunable_bundle_max);
3128 sc->flags |= FXP_FLAG_UCODE;
3129 bzero(cbp, FXP_TXCB_SZ);
3132 #define FXP_SYSCTL_STAT_ADD(c, h, n, p, d) \
3133 SYSCTL_ADD_UINT(c, h, OID_AUTO, n, CTLFLAG_RD, p, 0, d)
3136 fxp_sysctl_node(struct fxp_softc *sc)
3138 struct sysctl_ctx_list *ctx;
3139 struct sysctl_oid_list *child, *parent;
3140 struct sysctl_oid *tree;
3141 struct fxp_hwstats *hsp;
3143 ctx = device_get_sysctl_ctx(sc->dev);
3144 child = SYSCTL_CHILDREN(device_get_sysctl_tree(sc->dev));
3146 SYSCTL_ADD_PROC(ctx, child,
3147 OID_AUTO, "int_delay", CTLTYPE_INT | CTLFLAG_RW,
3148 &sc->tunable_int_delay, 0, sysctl_hw_fxp_int_delay, "I",
3149 "FXP driver receive interrupt microcode bundling delay");
3150 SYSCTL_ADD_PROC(ctx, child,
3151 OID_AUTO, "bundle_max", CTLTYPE_INT | CTLFLAG_RW,
3152 &sc->tunable_bundle_max, 0, sysctl_hw_fxp_bundle_max, "I",
3153 "FXP driver receive interrupt microcode bundle size limit");
3154 SYSCTL_ADD_INT(ctx, child,OID_AUTO, "rnr", CTLFLAG_RD, &sc->rnr, 0,
3158 * Pull in device tunables.
3160 sc->tunable_int_delay = TUNABLE_INT_DELAY;
3161 sc->tunable_bundle_max = TUNABLE_BUNDLE_MAX;
3162 (void) resource_int_value(device_get_name(sc->dev),
3163 device_get_unit(sc->dev), "int_delay", &sc->tunable_int_delay);
3164 (void) resource_int_value(device_get_name(sc->dev),
3165 device_get_unit(sc->dev), "bundle_max", &sc->tunable_bundle_max);
3168 hsp = &sc->fxp_hwstats;
3169 tree = SYSCTL_ADD_NODE(ctx, child, OID_AUTO, "stats", CTLFLAG_RD,
3170 NULL, "FXP statistics");
3171 parent = SYSCTL_CHILDREN(tree);
3173 /* Rx MAC statistics. */
3174 tree = SYSCTL_ADD_NODE(ctx, parent, OID_AUTO, "rx", CTLFLAG_RD,
3175 NULL, "Rx MAC statistics");
3176 child = SYSCTL_CHILDREN(tree);
3177 FXP_SYSCTL_STAT_ADD(ctx, child, "good_frames",
3178 &hsp->rx_good, "Good frames");
3179 FXP_SYSCTL_STAT_ADD(ctx, child, "crc_errors",
3180 &hsp->rx_crc_errors, "CRC errors");
3181 FXP_SYSCTL_STAT_ADD(ctx, child, "alignment_errors",
3182 &hsp->rx_alignment_errors, "Alignment errors");
3183 FXP_SYSCTL_STAT_ADD(ctx, child, "rnr_errors",
3184 &hsp->rx_rnr_errors, "RNR errors");
3185 FXP_SYSCTL_STAT_ADD(ctx, child, "overrun_errors",
3186 &hsp->rx_overrun_errors, "Overrun errors");
3187 FXP_SYSCTL_STAT_ADD(ctx, child, "cdt_errors",
3188 &hsp->rx_cdt_errors, "Collision detect errors");
3189 FXP_SYSCTL_STAT_ADD(ctx, child, "shortframes",
3190 &hsp->rx_shortframes, "Short frame errors");
3191 if (sc->revision >= FXP_REV_82558_A4) {
3192 FXP_SYSCTL_STAT_ADD(ctx, child, "pause",
3193 &hsp->rx_pause, "Pause frames");
3194 FXP_SYSCTL_STAT_ADD(ctx, child, "controls",
3195 &hsp->rx_controls, "Unsupported control frames");
3197 if (sc->revision >= FXP_REV_82559_A0)
3198 FXP_SYSCTL_STAT_ADD(ctx, child, "tco",
3199 &hsp->rx_tco, "TCO frames");
3201 /* Tx MAC statistics. */
3202 tree = SYSCTL_ADD_NODE(ctx, parent, OID_AUTO, "tx", CTLFLAG_RD,
3203 NULL, "Tx MAC statistics");
3204 child = SYSCTL_CHILDREN(tree);
3205 FXP_SYSCTL_STAT_ADD(ctx, child, "good_frames",
3206 &hsp->tx_good, "Good frames");
3207 FXP_SYSCTL_STAT_ADD(ctx, child, "maxcols",
3208 &hsp->tx_maxcols, "Maximum collisions errors");
3209 FXP_SYSCTL_STAT_ADD(ctx, child, "latecols",
3210 &hsp->tx_latecols, "Late collisions errors");
3211 FXP_SYSCTL_STAT_ADD(ctx, child, "underruns",
3212 &hsp->tx_underruns, "Underrun errors");
3213 FXP_SYSCTL_STAT_ADD(ctx, child, "lostcrs",
3214 &hsp->tx_lostcrs, "Lost carrier sense");
3215 FXP_SYSCTL_STAT_ADD(ctx, child, "deffered",
3216 &hsp->tx_deffered, "Deferred");
3217 FXP_SYSCTL_STAT_ADD(ctx, child, "single_collisions",
3218 &hsp->tx_single_collisions, "Single collisions");
3219 FXP_SYSCTL_STAT_ADD(ctx, child, "multiple_collisions",
3220 &hsp->tx_multiple_collisions, "Multiple collisions");
3221 FXP_SYSCTL_STAT_ADD(ctx, child, "total_collisions",
3222 &hsp->tx_total_collisions, "Total collisions");
3223 if (sc->revision >= FXP_REV_82558_A4)
3224 FXP_SYSCTL_STAT_ADD(ctx, child, "pause",
3225 &hsp->tx_pause, "Pause frames");
3226 if (sc->revision >= FXP_REV_82559_A0)
3227 FXP_SYSCTL_STAT_ADD(ctx, child, "tco",
3228 &hsp->tx_tco, "TCO frames");
3231 #undef FXP_SYSCTL_STAT_ADD
3234 sysctl_int_range(SYSCTL_HANDLER_ARGS, int low, int high)
3238 value = *(int *)arg1;
3239 error = sysctl_handle_int(oidp, &value, 0, req);
3240 if (error || !req->newptr)
3242 if (value < low || value > high)
3244 *(int *)arg1 = value;
3249 * Interrupt delay is expressed in microseconds, a multiplier is used
3250 * to convert this to the appropriate clock ticks before using.
3253 sysctl_hw_fxp_int_delay(SYSCTL_HANDLER_ARGS)
3256 return (sysctl_int_range(oidp, arg1, arg2, req, 300, 3000));
3260 sysctl_hw_fxp_bundle_max(SYSCTL_HANDLER_ARGS)
3263 return (sysctl_int_range(oidp, arg1, arg2, req, 1, 0xffff));