2 * Copyright (c) 1992, 1993, University of Vermont and State
3 * Agricultural College.
4 * Copyright (c) 1992, 1993, Garrett A. Wollman.
7 * Copyright (c) 1990, 1991, William F. Jolitz
8 * Copyright (c) 1990, The Regents of the University of California
11 * Copyright (c) 1993, 1994, Charles M. Hannum
13 * EtherExpress 16 support:
14 * Copyright (c) 1993, 1994, 1995, Rodney W. Grimes
15 * Copyright (c) 1997, Aaron C. Smith
17 * All rights reserved.
19 * Redistribution and use in source and binary forms, with or without
20 * modification, are permitted provided that the following conditions
22 * 1. Redistributions of source code must retain the above copyright
23 * notice, this list of conditions and the following disclaimer.
24 * 2. Redistributions in binary form must reproduce the above copyright
25 * notice, this list of conditions and the following disclaimer in the
26 * documentation and/or other materials provided with the distribution.
27 * 3. All advertising materials mentioning features or use of this software
28 * must display the following acknowledgement:
29 * This product includes software developed by the University of
30 * Vermont and State Agricultural College and Garrett A. Wollman, by
31 * William F. Jolitz, by the University of California, Berkeley,
32 * Lawrence Berkeley Laboratory, and their contributors, by
33 * Charles M. Hannum, by Rodney W. Grimes, and by Aaron C. Smith.
34 * 4. Neither the names of the Universities nor the names of the authors
35 * may be used to endorse or promote products derived from this software
36 * without specific prior written permission.
38 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
39 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
40 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
41 * ARE DISCLAIMED. IN NO EVENT SHALL THE UNIVERSITY OR AUTHORS BE LIABLE
42 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
43 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
44 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
45 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
46 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
47 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
50 * MAINTAINER: Matthew N. Dodd <winter@jurai.net>
53 #include <sys/cdefs.h>
54 __FBSDID("$FreeBSD$");
57 * Intel 82586 Ethernet chip
58 * Register, bit, and structure definitions.
60 * Written by GAW with reference to the Clarkson Packet Driver code for this
61 * chip written by Russ Nelson and others.
63 * Intel EtherExpress 16 support from if_ix.c, written by Rodney W. Grimes.
67 * The i82586 is a very versatile chip, found in many implementations.
68 * Programming this chip is mostly the same, but certain details differ
69 * from card to card. This driver is written so that different cards
70 * can be automatically detected at run-time.
76 * We run the 82586 in a standard Ethernet mode. We keep NFRAMES
77 * received frame descriptors around for the receiver to use, and
78 * NRXBUFS associated receive buffer descriptors, both in a circular
79 * list. Whenever a frame is received, we rotate both lists as
80 * necessary. (The 586 treats both lists as a simple queue.) We also
81 * keep a transmit command around so that packets can be sent off
84 * We configure the adapter in AL-LOC = 1 mode, which means that the
85 * Ethernet/802.3 MAC header is placed at the beginning of the receive
86 * buffer rather than being split off into various fields in the RFD.
87 * This also means that we must include this header in the transmit
90 * By convention, all transmit commands, and only transmit commands,
91 * shall have the I (IE_CMD_INTR) bit set in the command. This way,
92 * when an interrupt arrives at ieintr(), it is immediately possible
93 * to tell what precisely caused it. ANY OTHER command-sending routines
94 * should run at splimp(), and should post an acknowledgement to every
95 * interrupt they generate.
97 * The 82586 has a 24-bit address space internally, and the adaptor's
98 * memory is located at the top of this region. However, the value
99 * we are given in configuration is normally the *bottom* of the adaptor
100 * RAM. So, we must go through a few gyrations to come up with a
101 * kernel virtual address which represents the actual beginning of the
102 * 586 address space. First, we autosize the RAM by running through
103 * several possible sizes and trying to initialize the adapter under
104 * the assumption that the selected size is correct. Then, knowing
105 * the correct RAM size, we set up our pointers in the softc `iomem'
106 * represents the computed base of the 586 address space. `iomembot'
107 * represents the actual configured base of adapter RAM. Finally,
108 * `iosize' represents the calculated size of 586 RAM. Then, when
109 * laying out commands, we use the interval [iomembot, iomembot +
110 * iosize); to make 24-pointers, we subtract iomem, and to make
111 * 16-pointers, we subtract iomem and and with 0xffff.
114 #include <sys/param.h>
115 #include <sys/systm.h>
116 #include <sys/eventhandler.h>
117 #include <sys/kernel.h>
118 #include <sys/malloc.h>
119 #include <sys/mbuf.h>
120 #include <sys/socket.h>
121 #include <sys/sockio.h>
122 #include <sys/syslog.h>
124 #include <sys/module.h>
127 #include <machine/bus.h>
128 #include <machine/resource.h>
129 #include <sys/rman.h>
131 #include <net/ethernet.h>
133 #include <net/if_types.h>
134 #include <net/if_dl.h>
136 #include <netinet/in.h>
137 #include <netinet/if_ether.h>
139 #include <dev/ic/i82586.h>
140 #include <dev/ie/if_ievar.h>
141 #include <dev/ie/if_iereg.h>
142 #include <dev/ie/if_ie507.h>
143 #include <dev/ie/if_iee16.h>
144 #include <i386/isa/elink.h>
149 #define IED_RINT 0x01
150 #define IED_TINT 0x02
153 #define IED_READFRAME 0x10
154 static int ie_debug = IED_RNR;
158 #define IE_BUF_LEN ETHER_MAX_LEN /* length of transmit buffer */
160 /* Forward declaration */
163 static void ieinit (void *);
164 static void ieinit_locked (struct ie_softc *);
165 static void ie_stop (struct ie_softc *);
166 static int ieioctl (struct ifnet *, u_long, caddr_t);
167 static void iestart (struct ifnet *);
168 static void iestart_locked (struct ifnet *);
171 ee16_interrupt_enable (struct ie_softc *);
172 static void ee16_eeprom_outbits (struct ie_softc *, int, int);
173 static void ee16_eeprom_clock (struct ie_softc *, int);
174 static u_short ee16_read_eeprom (struct ie_softc *, int);
175 static int ee16_eeprom_inbits (struct ie_softc *);
178 ie_ack (struct ie_softc *, u_int);
179 static void iereset (struct ie_softc *);
180 static void ie_readframe (struct ie_softc *, int);
181 static void ie_drop_packet_buffer (struct ie_softc *);
182 static void find_ie_mem_size (struct ie_softc *);
183 static int command_and_wait (struct ie_softc *,
184 int, void volatile *, int);
185 static void run_tdr (struct ie_softc *,
186 volatile struct ie_tdr_cmd *);
187 static int ierint (struct ie_softc *);
188 static int ietint (struct ie_softc *);
189 static int iernr (struct ie_softc *);
190 static void start_receiver (struct ie_softc *);
192 ieget (struct ie_softc *, struct mbuf **);
193 static v_caddr_t setup_rfa (struct ie_softc *, v_caddr_t);
194 static int mc_setup (struct ie_softc *);
195 static void ie_mc_reset (struct ie_softc *);
198 static void print_rbd (volatile struct ie_recv_buf_desc * rbd);
199 static int in_ierint = 0;
200 static int in_ietint = 0;
203 static const char *ie_hardware_names[] = {
215 * sizeof(iscp) == 1+1+2+4 == 8
216 * sizeof(scb) == 2+2+2+2+2+2+2+2 == 16
217 * NFRAMES * sizeof(rfd) == NFRAMES*(2+2+2+2+6+6+2+2) == NFRAMES*24 == 384
218 * sizeof(xmit_cmd) == 2+2+2+2+6+2 == 18
219 * sizeof(transmit buffer) == 1512
220 * sizeof(transmit buffer desc) == 8
224 * NRXBUFS * sizeof(rbd) == NRXBUFS*(2+2+4+2+2) == NRXBUFS*12
225 * NRXBUFS * IE_RBUF_SIZE == NRXBUFS*256
227 * NRXBUFS should be (16384 - 1946) / (256 + 12) == 14438 / 268 == 53
229 * With NRXBUFS == 48, this leaves us 1574 bytes for another command or
230 * more buffers. Another transmit command would be 18+8+1512 == 1538
231 * ---just barely fits!
233 * Obviously all these would have to be reduced for smaller memory sizes.
234 * With a larger memory, it would be possible to roughly double the number
235 * of both transmit and receive buffers.
238 #define NFRAMES 4 /* number of receive frames */
239 #define NRXBUFS 24 /* number of buffers to allocate */
240 #define IE_RBUF_SIZE 256 /* size of each buffer, MUST BE POWER OF TWO */
241 #define NTXBUFS 1 /* number of transmit commands */
242 #define IE_TBUF_SIZE ETHER_MAX_LEN /* size of transmit buffer */
244 #define MK_24(base, ptr) ((caddr_t)((uintptr_t)ptr - (uintptr_t)base))
245 #define MK_16(base, ptr) ((u_short)(uintptr_t)MK_24(base, ptr))
248 ee16_shutdown(struct ie_softc *sc)
252 outb(PORT(sc) + IEE16_ECTRL, IEE16_RESET_ASIC);
253 outb(PORT(sc) + IEE16_ECTRL, 0);
257 * Taken almost exactly from Bill's if_is.c, then modified beyond recognition.
260 ie_attach(device_t dev)
262 struct ie_softc * sc;
267 sc = device_get_softc(dev);
268 ifp = sc->ifp = if_alloc(IFT_ETHER);
270 device_printf(sc->dev, "can not if_alloc()\n");
275 mtx_init(&sc->lock, device_get_nameunit(dev), MTX_NETWORK_LOCK,
279 * based on the amount of memory we have, allocate our tx and rx
282 factor = rman_get_size(sc->mem_res) / 8192;
283 sc->nframes = factor * NFRAMES;
284 sc->nrxbufs = factor * NRXBUFS;
285 sc->ntxbufs = factor * NTXBUFS;
288 * Since all of these guys are arrays of pointers, allocate as one
289 * big chunk and dole out accordingly.
291 allocsize = sizeof(void *) * (sc->nframes
293 + (sc->ntxbufs * 3));
294 sc->rframes = (volatile struct ie_recv_frame_desc **) malloc(allocsize,
297 if (sc->rframes == NULL) {
298 mtx_destroy(&sc->lock);
302 (volatile struct ie_recv_buf_desc **)&sc->rframes[sc->nframes];
303 sc->cbuffs = (volatile u_char **)&sc->rbuffs[sc->nrxbufs];
305 (volatile struct ie_xmit_cmd **)&sc->cbuffs[sc->nrxbufs];
307 (volatile struct ie_xmit_buf **)&sc->xmit_cmds[sc->ntxbufs];
308 sc->xmit_cbuffs = (volatile u_char **)&sc->xmit_buffs[sc->ntxbufs];
311 device_printf(sc->dev, "hardware type %s, revision %d\n",
312 ie_hardware_names[sc->hard_type], sc->hard_vers + 1);
315 if_initname(ifp, device_get_name(dev), device_get_unit(dev));
316 ifp->if_mtu = ETHERMTU;
317 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
318 ifp->if_start = iestart;
319 ifp->if_ioctl = ieioctl;
320 ifp->if_init = ieinit;
321 IFQ_SET_MAXLEN(&ifp->if_snd, ifqmaxlen);
323 ether_ifattach(ifp, sc->enaddr);
325 error = bus_setup_intr(dev, sc->irq_res, INTR_TYPE_NET | INTR_MPSAFE,
326 NULL, ie_intr, sc, &sc->irq_ih);
328 device_printf(dev, "Unable to register interrupt handler\n");
329 mtx_destroy(&sc->lock);
337 ie_ack(struct ie_softc *sc, u_int mask)
340 sc->scb->ie_command = sc->scb->ie_status & mask;
341 (*sc->ie_chan_attn) (sc);
345 * What to do upon receipt of an interrupt.
350 struct ie_softc *sc = (struct ie_softc *)xsc;
355 /* Clear the interrupt latch on the 3C507. */
356 if (sc->hard_type == IE_3C507
357 && (inb(PORT(sc) + IE507_CTRL) & EL_CTRL_INTL))
358 outb(PORT(sc) + IE507_ICTRL, 1);
360 /* disable interrupts on the EE16. */
361 if (sc->hard_type == IE_EE16)
362 outb(PORT(sc) + IEE16_IRQ, sc->irq_encoded);
364 status = sc->scb->ie_status;
368 /* Don't ack interrupts which we didn't receive */
369 ie_ack(sc, IE_ST_WHENCE & status);
371 if (status & (IE_ST_RECV | IE_ST_RNR)) {
374 if (ie_debug & IED_RINT)
375 if_printf(sc->ifp, "rint\n");
382 if (status & IE_ST_DONE) {
385 if (ie_debug & IED_TINT)
386 if_printf(sc->ifp, "tint\n");
393 if (status & IE_ST_RNR) {
395 if (ie_debug & IED_RNR)
396 if_printf(sc->ifp, "rnr\n");
401 if ((status & IE_ST_ALLDONE) && (ie_debug & IED_CNA))
402 if_printf(sc->ifp, "cna\n");
405 if ((status = sc->scb->ie_status) & IE_ST_WHENCE)
408 /* Clear the interrupt latch on the 3C507. */
409 if (sc->hard_type == IE_3C507)
410 outb(PORT(sc) + IE507_ICTRL, 1);
412 /* enable interrupts on the EE16. */
413 if (sc->hard_type == IE_EE16)
414 outb(PORT(sc) + IEE16_IRQ, sc->irq_encoded | IEE16_IRQ_ENABLE);
419 * Process a received-frame interrupt.
422 ierint(struct ie_softc *sc)
425 static int timesthru = 1024;
429 status = sc->rframes[i]->ie_fd_status;
431 if ((status & IE_FD_COMPLETE) && (status & IE_FD_OK)) {
432 sc->ifp->if_ipackets++;
434 sc->ifp->if_ierrors +=
435 sc->scb->ie_err_crc +
436 sc->scb->ie_err_align +
437 sc->scb->ie_err_resource +
438 sc->scb->ie_err_overrun;
439 sc->scb->ie_err_crc = 0;
440 sc->scb->ie_err_align = 0;
441 sc->scb->ie_err_resource = 0;
442 sc->scb->ie_err_overrun = 0;
447 if (status & IE_FD_RNR) {
448 if (!(sc->scb->ie_status & IE_RU_READY)) {
449 sc->rframes[0]->ie_fd_next =
450 MK_16(MEM(sc), sc->rbuffs[0]);
451 sc->scb->ie_recv_list =
452 MK_16(MEM(sc), sc->rframes[0]);
453 command_and_wait(sc, IE_RU_START, 0, 0);
458 i = (i + 1) % sc->nframes;
464 * Process a command-complete interrupt. These are only generated by
465 * the transmission of frames. This routine is deceptively simple, since
466 * most of the real work is done by iestart().
469 ietint(struct ie_softc *sc)
471 struct ifnet *ifp = sc->ifp;
475 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
477 for (i = 0; i < sc->xmit_count; i++) {
478 status = sc->xmit_cmds[i]->ie_xmit_status;
480 if (status & IE_XS_LATECOLL) {
481 if_printf(ifp, "late collision\n");
482 ifp->if_collisions++;
484 } else if (status & IE_XS_NOCARRIER) {
485 if_printf(ifp, "no carrier\n");
487 } else if (status & IE_XS_LOSTCTS) {
488 if_printf(ifp, "lost CTS\n");
490 } else if (status & IE_XS_UNDERRUN) {
491 if_printf(ifp, "DMA underrun\n");
493 } else if (status & IE_XS_EXCMAX) {
494 if_printf(ifp, "too many collisions\n");
495 ifp->if_collisions += 16;
499 ifp->if_collisions += status & IE_XS_MAXCOLL;
505 * If multicast addresses were added or deleted while we were
506 * transmitting, ie_mc_reset() set the want_mcsetup flag indicating
507 * that we should do it.
509 if (sc->want_mcsetup) {
511 sc->want_mcsetup = 0;
513 /* Wish I knew why this seems to be necessary... */
514 sc->xmit_cmds[0]->ie_xmit_status |= IE_STAT_COMPL;
517 return (0); /* shouldn't be necessary */
521 * Process a receiver-not-ready interrupt. I believe that we get these
522 * when there aren't enough buffers to go around. For now (FIXME), we
523 * just restart the receiver, and hope everything's ok.
526 iernr(struct ie_softc *sc)
529 setup_rfa(sc, (v_caddr_t) sc->rframes[0]);
531 sc->scb->ie_recv_list = MK_16(MEM(sc), sc->rframes[0]);
532 command_and_wait(sc, IE_RU_START, 0, 0);
534 /* This doesn't work either, but it doesn't hang either. */
535 command_and_wait(sc, IE_RU_DISABLE, 0, 0); /* just in case */
536 setup_rfa(sc, (v_caddr_t) sc->rframes[0]); /* ignore cast-qual */
538 sc->scb->ie_recv_list = MK_16(MEM(sc), sc->rframes[0]);
539 command_and_wait(sc, IE_RU_START, 0, 0); /* was ENABLE */
542 ie_ack(sc, IE_ST_WHENCE);
544 sc->ifp->if_ierrors++;
549 * Compare two Ether/802 addresses for equality, inlined and
550 * unrolled for speed. I'd love to have an inline assembler
554 ether_equal(u_char * one, u_char * two)
556 if (one[0] != two[0])
558 if (one[1] != two[1])
560 if (one[2] != two[2])
562 if (one[3] != two[3])
564 if (one[4] != two[4])
566 if (one[5] != two[5])
572 * Determine quickly whether we should bother reading in this packet.
573 * This depends on whether BPF and/or bridging is enabled, whether we
574 * are receiving multicast address, and whether promiscuous mode is enabled.
575 * We assume that if IFF_PROMISC is set, then *somebody* wants to see
576 * all incoming packets.
579 check_eh(struct ie_softc *sc, struct ether_header *eh)
581 /* Optimize the common case: normal operation. We've received
582 either a unicast with our dest or a multicast packet. */
583 if (sc->promisc == 0) {
586 /* If not multicast, it's definitely for us */
587 if ((eh->ether_dhost[0] & 1) == 0)
590 /* Accept broadcasts (loose but fast check) */
591 if (eh->ether_dhost[0] == 0xff)
594 /* Compare against our multicast addresses */
595 for (i = 0; i < sc->mcast_count; i++) {
596 if (ether_equal(eh->ether_dhost,
597 (u_char *)&sc->mcast_addrs[i]))
603 /* Always accept packets when in promiscuous mode */
604 if ((sc->promisc & IFF_PROMISC) != 0)
607 /* Always accept packets directed at us */
608 if (ether_equal(eh->ether_dhost, IF_LLADDR(sc->ifp)))
611 /* Must have IFF_ALLMULTI but not IFF_PROMISC set. The chip is
612 actually in promiscuous mode, so discard unicast packets. */
613 return((eh->ether_dhost[0] & 1) != 0);
617 * We want to isolate the bits that have meaning... This assumes that
618 * IE_RBUF_SIZE is an even power of two. If somehow the act_len exceeds
619 * the size of the buffer, then we are screwed anyway.
622 ie_buflen(struct ie_softc *sc, int head)
624 return (sc->rbuffs[head]->ie_rbd_actual
625 & (IE_RBUF_SIZE | (IE_RBUF_SIZE - 1)));
629 ie_packet_len(struct ie_softc *sc)
632 int head = sc->rbhead;
636 if (!(sc->rbuffs[sc->rbhead]->ie_rbd_actual & IE_RBD_USED)) {
638 print_rbd(sc->rbuffs[sc->rbhead]);
641 "%s: receive descriptors out of sync at %d\n",
642 sc->ifp->if_xname, sc->rbhead);
646 i = sc->rbuffs[head]->ie_rbd_actual & IE_RBD_LAST;
648 acc += ie_buflen(sc, head);
649 head = (head + 1) % sc->nrxbufs;
656 * Read data off the interface, and turn it into an mbuf chain.
658 * This code is DRAMATICALLY different from the previous version; this
659 * version tries to allocate the entire mbuf chain up front, given the
660 * length of the data available. This enables us to allocate mbuf
661 * clusters in many situations where before we would have had a long
662 * chain of partially-full mbufs. This should help to speed up the
663 * operation considerably. (Provided that it works, of course.)
666 ieget(struct ie_softc *sc, struct mbuf **mp)
668 struct ether_header eh;
669 struct mbuf *m, *top, **mymp;
675 totlen = ie_packet_len(sc);
680 * Snarf the Ethernet header.
682 bcopy(sc->cbuffs[sc->rbhead], &eh, sizeof(struct ether_header));
683 /* ignore cast-qual warning here */
686 * As quickly as possible, check if this packet is for us. If not,
687 * don't waste a single cycle copying the rest of the packet in.
688 * This is only a consideration when FILTER is defined; i.e., when
689 * we are either running BPF or doing multicasting.
691 if (!check_eh(sc, &eh)) {
692 ie_drop_packet_buffer(sc);
693 sc->ifp->if_ierrors--; /* just this case, it's not an
699 MGETHDR(m, M_DONTWAIT, MT_DATA);
701 ie_drop_packet_buffer(sc);
702 /* XXXX if_ierrors++; */
707 m->m_pkthdr.rcvif = sc->ifp;
709 resid = m->m_pkthdr.len = totlen;
715 * This loop goes through and allocates mbufs for all the data we
716 * will be copying in. It does not actually do the copying yet.
718 do { /* while(resid > 0) */
720 * Try to allocate an mbuf to hold the data that we have.
721 * If we already allocated one, just get another one and
722 * stick it on the end (eventually). If we don't already
723 * have one, try to allocate an mbuf cluster big enough to
724 * hold the whole packet, if we think it's reasonable, or a
725 * single mbuf which may or may not be big enough. Got that?
728 MGET(m, M_DONTWAIT, MT_DATA);
731 ie_drop_packet_buffer(sc);
736 if (resid >= MINCLSIZE) {
737 MCLGET(m, M_DONTWAIT);
738 if (m->m_flags & M_EXT)
739 m->m_len = min(resid, MCLBYTES);
741 if (resid < m->m_len) {
742 if (!top && resid + max_linkhdr <= m->m_len)
743 m->m_data += max_linkhdr;
752 resid = totlen; /* remaining data */
753 offset = 0; /* packet offset */
754 thismboff = 0; /* offset in m */
756 m = top; /* current mbuf */
757 head = sc->rbhead; /* current rx buffer */
760 * Now we take the mbuf chain (hopefully only one mbuf most of the
761 * time) and stuff the data into it. There are no possible failures
762 * at or after this point.
764 while (resid > 0) { /* while there's stuff left */
765 int thislen = ie_buflen(sc, head) - offset;
768 * If too much data for the current mbuf, then fill the
769 * current one up, go to the next one, and try again.
771 if (thislen > m->m_len - thismboff) {
772 int newlen = m->m_len - thismboff;
774 bcopy((v_caddr_t) (sc->cbuffs[head] + offset),
775 mtod(m, caddr_t) +thismboff, (unsigned) newlen);
776 /* ignore cast-qual warning */
778 thismboff = 0; /* new mbuf, so no offset */
779 offset += newlen; /* we are now this far into
781 resid -= newlen; /* so there is this much left
786 * If there is more than enough space in the mbuf to hold
787 * the contents of this buffer, copy everything in, advance
788 * pointers, and so on.
790 if (thislen < m->m_len - thismboff) {
791 bcopy((v_caddr_t) (sc->cbuffs[head] + offset),
792 mtod(m, caddr_t) +thismboff, (unsigned) thislen);
793 thismboff += thislen; /* we are this far into the
795 resid -= thislen; /* and this much is left */
799 * Otherwise, there is exactly enough space to put this
800 * buffer's contents into the current mbuf. Do the
801 * combination of the above actions.
803 bcopy((v_caddr_t) (sc->cbuffs[head] + offset),
804 mtod(m, caddr_t) + thismboff, (unsigned) thislen);
806 thismboff = 0; /* new mbuf, start at the beginning */
807 resid -= thislen; /* and we are this far through */
810 * Advance all the pointers. We can get here from either of
811 * the last two cases, but never the first.
815 sc->rbuffs[head]->ie_rbd_actual = 0;
816 sc->rbuffs[head]->ie_rbd_length |= IE_RBD_LAST;
817 sc->rbhead = head = (head + 1) % sc->nrxbufs;
818 sc->rbuffs[sc->rbtail]->ie_rbd_length &= ~IE_RBD_LAST;
819 sc->rbtail = (sc->rbtail + 1) % sc->nrxbufs;
823 * Unless something changed strangely while we were doing the copy,
824 * we have now copied everything in from the shared memory. This
825 * means that we are done.
831 * Read frame NUM from unit UNIT (pre-cached as IE).
833 * This routine reads the RFD at NUM, and copies in the buffers from
834 * the list of RBD, then rotates the RBD and RFD lists so that the receiver
835 * doesn't start complaining. Trailers are DROPPED---there's no point
836 * in wasting time on confusing code to deal with them. Hopefully,
837 * this machine will never ARP for trailers anyway.
840 ie_readframe(struct ie_softc *sc, int num/* frame number to read */)
842 struct ifnet *ifp = sc->ifp;
843 struct ie_recv_frame_desc rfd;
846 struct ether_header *eh;
849 bcopy((v_caddr_t) (sc->rframes[num]), &rfd,
850 sizeof(struct ie_recv_frame_desc));
853 * Immediately advance the RFD list, since we we have copied ours
856 sc->rframes[num]->ie_fd_status = 0;
857 sc->rframes[num]->ie_fd_last |= IE_FD_LAST;
858 sc->rframes[sc->rftail]->ie_fd_last &= ~IE_FD_LAST;
859 sc->rftail = (sc->rftail + 1) % sc->nframes;
860 sc->rfhead = (sc->rfhead + 1) % sc->nframes;
862 if (rfd.ie_fd_status & IE_FD_OK) {
864 sc->ifp->if_ierrors++; /* this counts as an
870 eh = mtod(m, struct ether_header *);
871 if (ie_debug & IED_READFRAME) {
872 if_printf(ifp, "frame from ether %6D type %x\n",
873 eh->ether_shost, ":", (unsigned) eh->ether_type);
875 if (ntohs(eh->ether_type) > ETHERTYPE_TRAIL
876 && ntohs(eh->ether_type) < (ETHERTYPE_TRAIL + ETHERTYPE_NTRAILER))
877 printf("received trailer!\n");
884 * Finally pass this packet up to higher layers.
887 (*ifp->if_input)(ifp, m);
892 ie_drop_packet_buffer(struct ie_softc *sc)
898 * This means we are somehow out of sync. So, we reset the
901 if (!(sc->rbuffs[sc->rbhead]->ie_rbd_actual & IE_RBD_USED)) {
903 print_rbd(sc->rbuffs[sc->rbhead]);
905 log(LOG_ERR, "%s: receive descriptors out of sync at %d\n",
906 sc->ifp->if_xname, sc->rbhead);
910 i = sc->rbuffs[sc->rbhead]->ie_rbd_actual & IE_RBD_LAST;
912 sc->rbuffs[sc->rbhead]->ie_rbd_length |= IE_RBD_LAST;
913 sc->rbuffs[sc->rbhead]->ie_rbd_actual = 0;
914 sc->rbhead = (sc->rbhead + 1) % sc->nrxbufs;
915 sc->rbuffs[sc->rbtail]->ie_rbd_length &= ~IE_RBD_LAST;
916 sc->rbtail = (sc->rbtail + 1) % sc->nrxbufs;
922 * Start transmission on an interface.
925 iestart(struct ifnet *ifp)
927 struct ie_softc *sc = ifp->if_softc;
935 iestart_locked(struct ifnet *ifp)
937 struct ie_softc *sc = ifp->if_softc;
939 volatile unsigned char *buffer;
943 * This is not really volatile, in this routine, but it makes gcc
946 volatile u_short *bptr = &sc->scb->ie_command_list;
948 if (!(ifp->if_drv_flags & IFF_DRV_RUNNING))
950 if (ifp->if_drv_flags & IFF_DRV_OACTIVE)
954 IF_DEQUEUE(&sc->ifp->if_snd, m);
958 buffer = sc->xmit_cbuffs[sc->xmit_count];
961 for (m0 = m; m && len < IE_BUF_LEN; m = m->m_next) {
962 bcopy(mtod(m, caddr_t), buffer, m->m_len);
968 len = max(len, ETHER_MIN_LEN);
971 * See if bpf is listening on this interface, let it see the
972 * packet before we commit it to the wire.
975 (void *)sc->xmit_cbuffs[sc->xmit_count], len);
977 sc->xmit_buffs[sc->xmit_count]->ie_xmit_flags =
979 sc->xmit_buffs[sc->xmit_count]->ie_xmit_next = 0xffff;
980 sc->xmit_buffs[sc->xmit_count]->ie_xmit_buf =
981 MK_24(sc->iomem, sc->xmit_cbuffs[sc->xmit_count]);
983 sc->xmit_cmds[sc->xmit_count]->com.ie_cmd_cmd = IE_CMD_XMIT;
984 sc->xmit_cmds[sc->xmit_count]->ie_xmit_status = 0;
985 sc->xmit_cmds[sc->xmit_count]->ie_xmit_desc =
986 MK_16(sc->iomem, sc->xmit_buffs[sc->xmit_count]);
988 *bptr = MK_16(sc->iomem, sc->xmit_cmds[sc->xmit_count]);
989 bptr = &sc->xmit_cmds[sc->xmit_count]->com.ie_cmd_link;
991 } while (sc->xmit_count < sc->ntxbufs);
994 * If we queued up anything for transmission, send it.
996 if (sc->xmit_count) {
997 sc->xmit_cmds[sc->xmit_count - 1]->com.ie_cmd_cmd |=
998 IE_CMD_LAST | IE_CMD_INTR;
1001 * By passing the command pointer as a null, we tell
1002 * command_and_wait() to pretend that this isn't an action
1003 * command. I wish I understood what was happening here.
1005 command_and_wait(sc, IE_CU_START, 0, 0);
1006 ifp->if_drv_flags |= IFF_DRV_OACTIVE;
1012 * Check to see if there's an 82586 out there.
1015 check_ie_present(struct ie_softc *sc)
1017 volatile struct ie_sys_conf_ptr *scp;
1018 volatile struct ie_int_sys_conf_ptr *iscp;
1019 volatile struct ie_sys_ctl_block *scb;
1022 realbase = (uintptr_t) sc->iomembot + sc->iosize - (1 << 24);
1024 scp = (volatile struct ie_sys_conf_ptr *) (uintptr_t)
1025 (realbase + IE_SCP_ADDR);
1026 bzero((volatile char *) scp, sizeof *scp);
1029 * First we put the ISCP at the bottom of memory; this tests to make
1030 * sure that our idea of the size of memory is the same as the
1031 * controller's. This is NOT where the ISCP will be in normal
1034 iscp = (volatile struct ie_int_sys_conf_ptr *) sc->iomembot;
1035 bzero((volatile char *)iscp, sizeof *iscp);
1037 scb = (volatile struct ie_sys_ctl_block *) sc->iomembot;
1038 bzero((volatile char *)scb, sizeof *scb);
1040 scp->ie_bus_use = sc->bus_use; /* 8-bit or 16-bit */
1041 scp->ie_iscp_ptr = (caddr_t) (uintptr_t)
1042 ((volatile char *) iscp - (volatile char *) (uintptr_t) realbase);
1045 iscp->ie_scb_offset = MK_16(realbase, scb) + 256;
1047 (*sc->ie_reset_586) (sc);
1048 (*sc->ie_chan_attn) (sc);
1050 DELAY(100); /* wait a while... */
1052 if (iscp->ie_busy) {
1056 * Now relocate the ISCP to its real home, and reset the controller
1059 iscp = (void *) Align((caddr_t) (uintptr_t)
1060 (realbase + IE_SCP_ADDR -
1061 sizeof(struct ie_int_sys_conf_ptr)));
1062 bzero((volatile char *) iscp, sizeof *iscp); /* ignore cast-qual */
1064 scp->ie_iscp_ptr = (caddr_t) (uintptr_t)
1065 ((volatile char *) iscp - (volatile char *) (uintptr_t) realbase);
1068 iscp->ie_scb_offset = MK_16(realbase, scb);
1070 (*sc->ie_reset_586) (sc);
1071 (*sc->ie_chan_attn) (sc);
1075 if (iscp->ie_busy) {
1078 sc->iomem = (caddr_t) (uintptr_t) realbase;
1084 * Acknowledge any interrupts we may have caused...
1086 ie_ack(sc, IE_ST_WHENCE);
1092 * Divine the memory size of ie board UNIT.
1093 * Better hope there's nothing important hiding just below the ie card...
1096 find_ie_mem_size(struct ie_softc *sc)
1102 for (size = 65536; size >= 8192; size -= 8192) {
1103 if (check_ie_present(sc)) {
1112 el_reset_586(struct ie_softc *sc)
1114 outb(PORT(sc) + IE507_CTRL, EL_CTRL_RESET);
1116 outb(PORT(sc) + IE507_CTRL, EL_CTRL_NORMAL);
1121 sl_reset_586(struct ie_softc *sc)
1123 outb(PORT(sc) + IEATT_RESET, 0);
1127 ee16_reset_586(struct ie_softc *sc)
1129 outb(PORT(sc) + IEE16_ECTRL, IEE16_RESET_586);
1131 outb(PORT(sc) + IEE16_ECTRL, 0);
1136 el_chan_attn(struct ie_softc *sc)
1138 outb(PORT(sc) + IE507_ATTN, 1);
1142 sl_chan_attn(struct ie_softc *sc)
1144 outb(PORT(sc) + IEATT_ATTN, 0);
1148 ee16_chan_attn(struct ie_softc *sc)
1150 outb(PORT(sc) + IEE16_ATTN, 0);
1154 ee16_read_eeprom(struct ie_softc *sc, int location)
1158 ectrl = inb(sc->port + IEE16_ECTRL);
1159 ectrl &= IEE16_ECTRL_MASK;
1160 ectrl |= IEE16_ECTRL_EECS;
1161 outb(sc->port + IEE16_ECTRL, ectrl);
1163 ee16_eeprom_outbits(sc, IEE16_EEPROM_READ, IEE16_EEPROM_OPSIZE1);
1164 ee16_eeprom_outbits(sc, location, IEE16_EEPROM_ADDR_SIZE);
1165 edata = ee16_eeprom_inbits(sc);
1166 ectrl = inb(sc->port + IEE16_ECTRL);
1167 ectrl &= ~(IEE16_RESET_ASIC | IEE16_ECTRL_EEDI | IEE16_ECTRL_EECS);
1168 outb(sc->port + IEE16_ECTRL, ectrl);
1169 ee16_eeprom_clock(sc, 1);
1170 ee16_eeprom_clock(sc, 0);
1175 ee16_eeprom_outbits(struct ie_softc *sc, int edata, int count)
1179 ectrl = inb(sc->port + IEE16_ECTRL);
1180 ectrl &= ~IEE16_RESET_ASIC;
1181 for (i = count - 1; i >= 0; i--) {
1182 ectrl &= ~IEE16_ECTRL_EEDI;
1183 if (edata & (1 << i)) {
1184 ectrl |= IEE16_ECTRL_EEDI;
1186 outb(sc->port + IEE16_ECTRL, ectrl);
1187 DELAY(1); /* eeprom data must be setup for 0.4 uSec */
1188 ee16_eeprom_clock(sc, 1);
1189 ee16_eeprom_clock(sc, 0);
1191 ectrl &= ~IEE16_ECTRL_EEDI;
1192 outb(sc->port + IEE16_ECTRL, ectrl);
1193 DELAY(1); /* eeprom data must be held for 0.4 uSec */
1197 ee16_eeprom_inbits(struct ie_softc *sc)
1199 int ectrl, edata, i;
1201 ectrl = inb(sc->port + IEE16_ECTRL);
1202 ectrl &= ~IEE16_RESET_ASIC;
1203 for (edata = 0, i = 0; i < 16; i++) {
1205 ee16_eeprom_clock(sc, 1);
1206 ectrl = inb(sc->port + IEE16_ECTRL);
1207 if (ectrl & IEE16_ECTRL_EEDO) {
1210 ee16_eeprom_clock(sc, 0);
1216 ee16_eeprom_clock(struct ie_softc *sc, int state)
1220 ectrl = inb(sc->port + IEE16_ECTRL);
1221 ectrl &= ~(IEE16_RESET_ASIC | IEE16_ECTRL_EESK);
1223 ectrl |= IEE16_ECTRL_EESK;
1225 outb(sc->port + IEE16_ECTRL, ectrl);
1226 DELAY(9); /* EESK must be stable for 8.38 uSec */
1229 static __inline void
1230 ee16_interrupt_enable(struct ie_softc *sc)
1233 outb(sc->port + IEE16_IRQ, sc->irq_encoded | IEE16_IRQ_ENABLE);
1238 sl_read_ether(struct ie_softc *sc, unsigned char *addr)
1242 for (i = 0; i < 6; i++)
1243 addr[i] = inb(PORT(sc) + i);
1247 iereset(struct ie_softc *sc)
1249 struct ifnet *ifp = sc->ifp;
1251 if_printf(ifp, "reset\n");
1255 * Stop i82586 dead in its tracks.
1257 if (command_and_wait(sc, IE_RU_ABORT | IE_CU_ABORT, 0, 0))
1258 if_printf(ifp, "abort commands timed out\n");
1260 if (command_and_wait(sc, IE_RU_DISABLE | IE_CU_STOP, 0, 0))
1261 if_printf(ifp, "disable commands timed out\n");
1264 if (!check_ie_present(sc))
1265 panic("ie disappeared!");
1268 if (ifp->if_flags & IFF_UP)
1275 * Send a command to the controller and wait for it to either
1276 * complete or be accepted, depending on the command. If the
1277 * command pointer is null, then pretend that the command is
1278 * not an action command. If the command pointer is not null,
1279 * and the command is an action command, wait for
1280 * ((volatile struct ie_cmd_common *)pcmd)->ie_cmd_status & MASK
1284 command_and_wait(struct ie_softc *sc, int cmd, volatile void *pcmd, int mask)
1286 volatile struct ie_cmd_common *cc = pcmd;
1289 sc->scb->ie_command = (u_short) cmd;
1291 if (IE_ACTION_COMMAND(cmd) && pcmd) {
1292 (*sc->ie_chan_attn) (sc);
1295 * Now spin-lock waiting for status. This is not a very
1296 * nice thing to do, but I haven't figured out how, or
1297 * indeed if, we can put the process waiting for action to
1298 * sleep. (We may be getting called through some other
1299 * timeout running in the kernel.)
1301 * According to the packet driver, the minimum timeout
1302 * should be .369 seconds, which we round up to .37.
1304 for (i = 0; i < 370; i++) {
1305 if (cc->ie_cmd_status & mask)
1314 * Otherwise, just wait for the command to be accepted.
1316 (*sc->ie_chan_attn) (sc);
1318 while (sc->scb->ie_command); /* spin lock */
1325 * Run the time-domain reflectometer...
1328 run_tdr(struct ie_softc *sc, volatile struct ie_tdr_cmd *cmd)
1332 cmd->com.ie_cmd_status = 0;
1333 cmd->com.ie_cmd_cmd = IE_CMD_TDR | IE_CMD_LAST;
1334 cmd->com.ie_cmd_link = 0xffff;
1335 cmd->ie_tdr_time = 0;
1337 sc->scb->ie_command_list = MK_16(MEM(sc), cmd);
1338 cmd->ie_tdr_time = 0;
1340 if (command_and_wait(sc, IE_CU_START, cmd, IE_STAT_COMPL))
1343 result = cmd->ie_tdr_time;
1345 ie_ack(sc, IE_ST_WHENCE);
1347 if (result & IE_TDR_SUCCESS)
1350 if (result & IE_TDR_XCVR) {
1351 if_printf(sc->ifp, "transceiver problem\n");
1352 } else if (result & IE_TDR_OPEN) {
1353 if_printf(sc->ifp, "TDR detected an open %d clocks away\n",
1354 result & IE_TDR_TIME);
1355 } else if (result & IE_TDR_SHORT) {
1356 if_printf(sc->ifp, "TDR detected a short %d clocks away\n",
1357 result & IE_TDR_TIME);
1359 if_printf(sc->ifp, "TDR returned unknown status %x\n", result);
1364 start_receiver(struct ie_softc *sc)
1367 sc->scb->ie_recv_list = MK_16(MEM(sc), sc->rframes[0]);
1368 command_and_wait(sc, IE_RU_START, 0, 0);
1370 ie_ack(sc, IE_ST_WHENCE);
1374 * Here is a helper routine for iernr() and ieinit(). This sets up
1378 setup_rfa(struct ie_softc *sc, v_caddr_t ptr)
1380 volatile struct ie_recv_frame_desc *rfd = (volatile void *)ptr;
1381 volatile struct ie_recv_buf_desc *rbd;
1384 /* First lay them out */
1385 for (i = 0; i < sc->nframes; i++) {
1386 sc->rframes[i] = rfd;
1387 bzero((volatile char *) rfd, sizeof *rfd); /* ignore cast-qual */
1391 ptr = Alignvol(rfd); /* ignore cast-qual */
1393 /* Now link them together */
1394 for (i = 0; i < sc->nframes; i++) {
1395 sc->rframes[i]->ie_fd_next =
1396 MK_16(MEM(sc), sc->rframes[(i + 1) % sc->nframes]);
1399 /* Finally, set the EOL bit on the last one. */
1400 sc->rframes[sc->nframes - 1]->ie_fd_last |= IE_FD_LAST;
1403 * Now lay out some buffers for the incoming frames. Note that we
1404 * set aside a bit of slop in each buffer, to make sure that we have
1405 * enough space to hold a single frame in every buffer.
1407 rbd = (volatile void *) ptr;
1409 for (i = 0; i < sc->nrxbufs; i++) {
1410 sc->rbuffs[i] = rbd;
1411 bzero((volatile char *)rbd, sizeof *rbd);
1412 ptr = Alignvol(ptr + sizeof *rbd);
1413 rbd->ie_rbd_length = IE_RBUF_SIZE;
1414 rbd->ie_rbd_buffer = MK_24(MEM(sc), ptr);
1415 sc->cbuffs[i] = (volatile void *) ptr;
1416 ptr += IE_RBUF_SIZE;
1417 rbd = (volatile void *) ptr;
1420 /* Now link them together */
1421 for (i = 0; i < sc->nrxbufs; i++) {
1422 sc->rbuffs[i]->ie_rbd_next =
1423 MK_16(MEM(sc), sc->rbuffs[(i + 1) % sc->nrxbufs]);
1426 /* Tag EOF on the last one */
1427 sc->rbuffs[sc->nrxbufs - 1]->ie_rbd_length |= IE_RBD_LAST;
1430 * We use the head and tail pointers on receive to keep track of the
1431 * order in which RFDs and RBDs are used.
1434 sc->rftail = sc->nframes - 1;
1436 sc->rbtail = sc->nrxbufs - 1;
1438 sc->scb->ie_recv_list = MK_16(MEM(sc), sc->rframes[0]);
1439 sc->rframes[0]->ie_fd_buf_desc = MK_16(MEM(sc), sc->rbuffs[0]);
1441 ptr = Alignvol(ptr);
1446 * Run the multicast setup command.
1449 mc_setup(struct ie_softc *sc)
1451 volatile struct ie_mcast_cmd *cmd = (volatile void *)sc->xmit_cbuffs[0];
1453 cmd->com.ie_cmd_status = 0;
1454 cmd->com.ie_cmd_cmd = IE_CMD_MCAST | IE_CMD_LAST;
1455 cmd->com.ie_cmd_link = 0xffff;
1457 /* ignore cast-qual */
1458 bcopy((v_caddr_t) sc->mcast_addrs, (v_caddr_t) cmd->ie_mcast_addrs,
1459 sc->mcast_count * sizeof *sc->mcast_addrs);
1461 cmd->ie_mcast_bytes = sc->mcast_count * 6; /* grrr... */
1463 sc->scb->ie_command_list = MK_16(MEM(sc), cmd);
1464 if (command_and_wait(sc, IE_CU_START, cmd, IE_STAT_COMPL)
1465 || !(cmd->com.ie_cmd_status & IE_STAT_OK)) {
1466 if_printf(sc->ifp, "multicast address setup command failed\n");
1473 * This routine takes the environment generated by check_ie_present()
1474 * and adds to it all the other structures we need to operate the adapter.
1475 * This includes executing the CONFIGURE, IA-SETUP, and MC-SETUP commands,
1476 * starting the receiver unit, and clearing interrupts.
1482 struct ie_softc *sc = xsc;
1490 ieinit_locked(struct ie_softc *sc)
1492 struct ifnet *ifp = sc->ifp;
1493 volatile struct ie_sys_ctl_block *scb = sc->scb;
1497 ptr = Alignvol((volatile char *) scb + sizeof *scb);
1500 * Send the configure command first.
1503 volatile struct ie_config_cmd *cmd = (volatile void *) ptr;
1505 ie_setup_config(cmd, sc->promisc,
1506 sc->hard_type == IE_STARLAN10);
1507 cmd->com.ie_cmd_status = 0;
1508 cmd->com.ie_cmd_cmd = IE_CMD_CONFIG | IE_CMD_LAST;
1509 cmd->com.ie_cmd_link = 0xffff;
1511 scb->ie_command_list = MK_16(MEM(sc), cmd);
1513 if (command_and_wait(sc, IE_CU_START, cmd, IE_STAT_COMPL)
1514 || !(cmd->com.ie_cmd_status & IE_STAT_OK)) {
1515 if_printf(ifp, "configure command failed\n");
1520 * Now send the Individual Address Setup command.
1523 volatile struct ie_iasetup_cmd *cmd = (volatile void *) ptr;
1525 cmd->com.ie_cmd_status = 0;
1526 cmd->com.ie_cmd_cmd = IE_CMD_IASETUP | IE_CMD_LAST;
1527 cmd->com.ie_cmd_link = 0xffff;
1529 bcopy((volatile char *)IF_LLADDR(ifp),
1530 (volatile char *)&cmd->ie_address, sizeof cmd->ie_address);
1531 scb->ie_command_list = MK_16(MEM(sc), cmd);
1532 if (command_and_wait(sc, IE_CU_START, cmd, IE_STAT_COMPL)
1533 || !(cmd->com.ie_cmd_status & IE_STAT_OK)) {
1534 if_printf(ifp, "individual address "
1535 "setup command failed\n");
1541 * Now run the time-domain reflectometer.
1543 run_tdr(sc, (volatile void *) ptr);
1546 * Acknowledge any interrupts we have generated thus far.
1548 ie_ack(sc, IE_ST_WHENCE);
1553 ptr = setup_rfa(sc, ptr);
1556 * Finally, the transmit command and buffer are the last little bit
1560 /* transmit command buffers */
1561 for (i = 0; i < sc->ntxbufs; i++) {
1562 sc->xmit_cmds[i] = (volatile void *) ptr;
1563 ptr += sizeof *sc->xmit_cmds[i];
1564 ptr = Alignvol(ptr);
1565 sc->xmit_buffs[i] = (volatile void *)ptr;
1566 ptr += sizeof *sc->xmit_buffs[i];
1567 ptr = Alignvol(ptr);
1570 /* transmit buffers */
1571 for (i = 0; i < sc->ntxbufs - 1; i++) {
1572 sc->xmit_cbuffs[i] = (volatile void *)ptr;
1574 ptr = Alignvol(ptr);
1576 sc->xmit_cbuffs[sc->ntxbufs - 1] = (volatile void *) ptr;
1578 for (i = 1; i < sc->ntxbufs; i++) {
1579 bzero((v_caddr_t) sc->xmit_cmds[i], sizeof *sc->xmit_cmds[i]);
1580 bzero((v_caddr_t) sc->xmit_buffs[i], sizeof *sc->xmit_buffs[i]);
1584 * This must be coordinated with iestart() and ietint().
1586 sc->xmit_cmds[0]->ie_xmit_status = IE_STAT_COMPL;
1588 /* take the ee16 out of loopback */
1589 if (sc->hard_type == IE_EE16) {
1590 u_int8_t bart_config;
1592 bart_config = inb(PORT(sc) + IEE16_CONFIG);
1593 bart_config &= ~IEE16_BART_LOOPBACK;
1594 /* inb doesn't get bit! */
1595 bart_config |= IEE16_BART_MCS16_TEST;
1596 outb(PORT(sc) + IEE16_CONFIG, bart_config);
1597 ee16_interrupt_enable(sc);
1600 ifp->if_drv_flags |= IFF_DRV_RUNNING; /* tell higher levels
1602 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
1610 ie_stop(struct ie_softc *sc)
1612 struct ifnet *ifp = sc->ifp;
1614 ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
1615 command_and_wait(sc, IE_RU_DISABLE, 0, 0);
1619 ieioctl(struct ifnet *ifp, u_long command, caddr_t data)
1622 struct ie_softc *sc = ifp->if_softc;
1627 * Note that this device doesn't have an "all multicast"
1628 * mode, so we must turn on promiscuous mode and do the
1629 * filtering manually.
1632 if ((ifp->if_flags & IFF_UP) == 0 &&
1633 (ifp->if_drv_flags & IFF_DRV_RUNNING)) {
1635 } else if ((ifp->if_flags & IFF_UP) &&
1636 (ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) {
1638 ifp->if_flags & (IFF_PROMISC | IFF_ALLMULTI);
1640 } else if (sc->promisc ^
1641 (ifp->if_flags & (IFF_PROMISC | IFF_ALLMULTI))) {
1643 ifp->if_flags & (IFF_PROMISC | IFF_ALLMULTI);
1652 * Update multicast listeners
1654 /* reset multicast filtering */
1662 error = ether_ioctl(ifp, command, data);
1670 ie_mc_reset(struct ie_softc *sc)
1672 struct ifmultiaddr *ifma;
1675 * Step through the list of addresses.
1677 sc->mcast_count = 0;
1678 if_maddr_rlock(sc->ifp);
1679 TAILQ_FOREACH(ifma, &sc->ifp->if_multiaddrs, ifma_link) {
1680 if (ifma->ifma_addr->sa_family != AF_LINK)
1683 /* XXX - this is broken... */
1684 if (sc->mcast_count >= MAXMCAST) {
1685 sc->ifp->if_flags |= IFF_ALLMULTI;
1686 if (sc->ifp->if_flags & IFF_UP)
1690 bcopy(LLADDR((struct sockaddr_dl *) ifma->ifma_addr),
1691 &(sc->mcast_addrs[sc->mcast_count]), 6);
1694 if_maddr_runlock(sc->ifp);
1697 sc->want_mcsetup = 1;
1703 print_rbd(volatile struct ie_recv_buf_desc * rbd)
1705 printf("RBD at %p:\n"
1706 "actual %04x, next %04x, buffer %p\n"
1707 "length %04x, mbz %04x\n",
1708 (volatile void *) rbd,
1709 rbd->ie_rbd_actual, rbd->ie_rbd_next,
1710 (void *) rbd->ie_rbd_buffer,
1711 rbd->ie_rbd_length, rbd->mbz);
1717 ie_alloc_resources (device_t dev)
1719 struct ie_softc * sc;
1723 sc = device_get_softc(dev);
1725 sc->io_res = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &sc->io_rid,
1728 device_printf(dev, "No I/O space?!\n");
1732 sc->io_bt = rman_get_bustag(sc->io_res);
1733 sc->io_bh = rman_get_bushandle(sc->io_res);
1735 sc->mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &sc->mem_rid,
1738 device_printf(dev, "No Memory!\n");
1742 sc->mem_bt = rman_get_bustag(sc->mem_res);
1743 sc->mem_bh = rman_get_bushandle(sc->mem_res);
1745 sc->irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &sc->irq_rid,
1748 device_printf(dev, "No IRQ!\n");
1753 sc->port = rman_get_start(sc->io_res); /* XXX hack */
1754 sc->iomembot = rman_get_virtual(sc->mem_res);
1755 sc->iosize = rman_get_size(sc->mem_res);
1763 ie_release_resources (device_t dev)
1765 struct ie_softc * sc;
1767 sc = device_get_softc(dev);
1770 bus_teardown_intr(dev, sc->irq_res, sc->irq_ih);
1772 free(sc->rframes, M_DEVBUF);
1774 bus_release_resource(dev, SYS_RES_IOPORT,
1775 sc->io_rid, sc->io_res);
1777 bus_release_resource(dev, SYS_RES_IRQ,
1778 sc->irq_rid, sc->irq_res);
1780 bus_release_resource(dev, SYS_RES_MEMORY,
1781 sc->mem_rid, sc->mem_res);
1789 ie_detach (device_t dev)
1791 struct ie_softc * sc;
1794 sc = device_get_softc(dev);
1798 if (sc->hard_type == IE_EE16)
1803 ether_ifdetach(ifp);
1804 ie_release_resources(dev);
1805 mtx_destroy(&sc->lock);