]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - sys/dev/iicbus/iicoc.h
Upgrade LDNS to 1.7.0.
[FreeBSD/FreeBSD.git] / sys / dev / iicbus / iicoc.h
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
3  *
4  * Copyright (c) 2003-2012 Broadcom Corporation
5  * All Rights Reserved
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  *
11  * 1. Redistributions of source code must retain the above copyright
12  *    notice, this list of conditions and the following disclaimer.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in
15  *    the documentation and/or other materials provided with the
16  *    distribution.
17  * 
18  * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
19  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
20  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21  * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
22  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
23  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
24  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
25  * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
26  * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
27  * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
28  * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
29  *
30  * $FreeBSD$
31  */
32
33 #ifndef __OPENCORE_I2C_H__
34 #define __OPENCORE_I2C_H__
35
36 /* I2C specific registers */
37 #define OC_I2C_PRESCALE_LO_REG          0x00
38 #define OC_I2C_PRESCALE_HI_REG          0x01
39 #define OC_I2C_CTRL_REG                 0x02
40 #define OC_I2C_TRANSMIT_REG             0x03  /* tx and rx - same reg */
41 #define OC_I2C_RECV_REG                 0x03  /* tx and rx - same reg */
42 #define OC_I2C_DATA_REG                 0x03  /* tx and rx - same reg */
43 #define OC_I2C_CMD_REG                  0x04  /* cmd and status - same reg */
44 #define OC_I2C_STATUS_REG               0x04  /* cmd and status - same reg */
45
46 #define XLP_I2C_CLKFREQ                 133333333 /* XLP 133 MHz IO clock */
47 #define XLP_I2C_FREQ                    100000  /* default 100kHz */
48 #define I2C_TIMEOUT                     500000
49
50 /*
51  * These defines pertain to the OpenCores
52  * I2C Master Host Controller used in XLP
53  */
54
55 #define OC_PRESCALER_LO                 0
56 #define OC_PRESCALER_HI                 1
57
58 #define OC_CONTROL                      2
59 #define OC_CONTROL_EN                   0x80
60 #define OC_CONTROL_IEN                  0x40
61
62 #define OC_DATA                         3       /* Data TX & RX Reg */
63
64 #define OC_COMMAND                      4
65 #define OC_COMMAND_START                0x90
66 #define OC_COMMAND_STOP                 0x40
67 #define OC_COMMAND_READ                 0x20
68 #define OC_COMMAND_WRITE                0x10
69 #define OC_COMMAND_RDACK                0x20
70 #define OC_COMMAND_RDNACK               0x28
71 #define OC_COMMAND_IACK                 0x01    /* Not used */
72
73 #define OC_STATUS                       4       /* Same as 'command' */
74 #define OC_STATUS_NACK                  0x80    /* Did not get an ACK */
75 #define OC_STATUS_BUSY                  0x40
76 #define OC_STATUS_AL                    0x20    /* Arbitration Lost */
77 #define OC_STATUS_TIP                   0x02    /* Transfer in Progress  */
78 #define OC_STATUS_IF                    0x01    /* Intr. Pending Flag */
79
80 #endif