3 * Copyright (c) 1997-2009 by Matthew Jacob
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
16 * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19 * ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30 * Soft Definitions for for Qlogic ISP SCSI adapters.
36 #if defined(__NetBSD__) || defined(__OpenBSD__)
37 #include <dev/ic/isp_stds.h>
38 #include <dev/ic/ispmbox.h>
41 #include <dev/isp/isp_stds.h>
42 #include <dev/isp/ispmbox.h>
53 #define ISP_CORE_VERSION_MAJOR 7
54 #define ISP_CORE_VERSION_MINOR 0
57 * Vector for bus specific code to provide specific services.
59 typedef struct ispsoftc ispsoftc_t;
61 int (*dv_rd_isr) (ispsoftc_t *, uint32_t *, uint16_t *, uint16_t *);
62 uint32_t (*dv_rd_reg) (ispsoftc_t *, int);
63 void (*dv_wr_reg) (ispsoftc_t *, int, uint32_t);
64 int (*dv_mbxdma) (ispsoftc_t *);
65 int (*dv_dmaset) (ispsoftc_t *, XS_T *, void *);
66 void (*dv_dmaclr) (ispsoftc_t *, XS_T *, uint32_t);
67 void (*dv_reset0) (ispsoftc_t *);
68 void (*dv_reset1) (ispsoftc_t *);
69 void (*dv_dregs) (ispsoftc_t *, const char *);
70 const void * dv_ispfw; /* ptr to f/w */
72 uint16_t dv_clock; /* clock frequency */
78 #define MAX_TARGETS 16
80 #define MAX_FC_TARG 256
82 #define ISP_MAX_TARGETS(isp) (IS_FC(isp)? MAX_FC_TARG : MAX_TARGETS)
83 #define ISP_MAX_LUNS(isp) (isp)->isp_maxluns
86 * Macros to access ISP registers through bus specific layers-
87 * mostly wrappers to vector through the mdvec structure.
89 #define ISP_READ_ISR(isp, isrp, semap, mbox0p) \
90 (*(isp)->isp_mdvec->dv_rd_isr)(isp, isrp, semap, mbox0p)
92 #define ISP_READ(isp, reg) \
93 (*(isp)->isp_mdvec->dv_rd_reg)((isp), (reg))
95 #define ISP_WRITE(isp, reg, val) \
96 (*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), (val))
98 #define ISP_MBOXDMASETUP(isp) \
99 (*(isp)->isp_mdvec->dv_mbxdma)((isp))
101 #define ISP_DMASETUP(isp, xs, req) \
102 (*(isp)->isp_mdvec->dv_dmaset)((isp), (xs), (req))
104 #define ISP_DMAFREE(isp, xs, hndl) \
105 if ((isp)->isp_mdvec->dv_dmaclr) \
106 (*(isp)->isp_mdvec->dv_dmaclr)((isp), (xs), (hndl))
108 #define ISP_RESET0(isp) \
109 if ((isp)->isp_mdvec->dv_reset0) (*(isp)->isp_mdvec->dv_reset0)((isp))
110 #define ISP_RESET1(isp) \
111 if ((isp)->isp_mdvec->dv_reset1) (*(isp)->isp_mdvec->dv_reset1)((isp))
112 #define ISP_DUMPREGS(isp, m) \
113 if ((isp)->isp_mdvec->dv_dregs) (*(isp)->isp_mdvec->dv_dregs)((isp),(m))
115 #define ISP_SETBITS(isp, reg, val) \
116 (*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), ISP_READ((isp), (reg)) | (val))
118 #define ISP_CLRBITS(isp, reg, val) \
119 (*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), ISP_READ((isp), (reg)) & ~(val))
122 * The MEMORYBARRIER macro is defined per platform (to provide synchronization
123 * on Request and Response Queues, Scratch DMA areas, and Registers)
125 * Defined Memory Barrier Synchronization Types
127 #define SYNC_REQUEST 0 /* request queue synchronization */
128 #define SYNC_RESULT 1 /* result queue synchronization */
129 #define SYNC_SFORDEV 2 /* scratch, sync for ISP */
130 #define SYNC_SFORCPU 3 /* scratch, sync for CPU */
131 #define SYNC_REG 4 /* for registers */
132 #define SYNC_ATIOQ 5 /* atio result queue (24xx) */
135 * Request/Response Queue defines and macros.
136 * The maximum is defined per platform (and can be based on board type).
138 /* This is the size of a queue entry (request and response) */
139 #define QENTRY_LEN 64
140 /* Both request and result queue length must be a power of two */
141 #define RQUEST_QUEUE_LEN(x) MAXISPREQUEST(x)
142 #ifdef ISP_TARGET_MODE
143 #define RESULT_QUEUE_LEN(x) MAXISPREQUEST(x)
145 #define RESULT_QUEUE_LEN(x) \
146 (((MAXISPREQUEST(x) >> 2) < 64)? 64 : MAXISPREQUEST(x) >> 2)
148 #define ISP_QUEUE_ENTRY(q, idx) (((uint8_t *)q) + ((idx) * QENTRY_LEN))
149 #define ISP_QUEUE_SIZE(n) ((n) * QENTRY_LEN)
150 #define ISP_NXT_QENTRY(idx, qlen) (((idx) + 1) & ((qlen)-1))
151 #define ISP_QFREE(in, out, qlen) \
152 ((in == out)? (qlen - 1) : ((in > out)? \
153 ((qlen - 1) - (in - out)) : (out - in - 1)))
154 #define ISP_QAVAIL(isp) \
155 ISP_QFREE(isp->isp_reqidx, isp->isp_reqodx, RQUEST_QUEUE_LEN(isp))
157 #define ISP_ADD_REQUEST(isp, nxti) \
158 MEMORYBARRIER(isp, SYNC_REQUEST, isp->isp_reqidx, QENTRY_LEN, -1); \
159 ISP_WRITE(isp, isp->isp_rqstinrp, nxti); \
160 isp->isp_reqidx = nxti
162 #define ISP_SYNC_REQUEST(isp) \
163 MEMORYBARRIER(isp, SYNC_REQUEST, isp->isp_reqidx, QENTRY_LEN, -1); \
164 isp->isp_reqidx = ISP_NXT_QENTRY(isp->isp_reqidx, RQUEST_QUEUE_LEN(isp)); \
165 ISP_WRITE(isp, isp->isp_rqstinrp, isp->isp_reqidx)
168 * SCSI Specific Host Adapter Parameters- per bus, per target
175 isp_req_ack_active_neg : 1,
176 isp_data_line_active_neg: 1,
177 isp_cmd_dma_burst_enable: 1,
178 isp_data_dma_burst_enabl: 1,
179 isp_fifo_threshold : 3,
184 isp_fast_mttr : 1, /* fast sram */
185 isp_initiator_id : 4,
186 isp_async_data_setup : 4;
187 uint16_t isp_selection_timeout;
188 uint16_t isp_max_queue_depth;
189 uint8_t isp_tag_aging;
190 uint8_t isp_bus_reset_delay;
191 uint8_t isp_retry_count;
192 uint8_t isp_retry_delay;
197 dev_enable : 1, /* ignored */
203 uint8_t actv_period; /* current sync period */
204 uint8_t goal_period; /* goal sync period */
205 uint8_t nvrm_period; /* nvram sync period */
206 uint16_t actv_flags; /* current device flags */
207 uint16_t goal_flags; /* goal device flags */
208 uint16_t nvrm_flags; /* nvram device flags */
209 } isp_devparam[MAX_TARGETS];
215 #define DPARM_DISC 0x8000
216 #define DPARM_PARITY 0x4000
217 #define DPARM_WIDE 0x2000
218 #define DPARM_SYNC 0x1000
219 #define DPARM_TQING 0x0800
220 #define DPARM_ARQ 0x0400
221 #define DPARM_QFRZ 0x0200
222 #define DPARM_RENEG 0x0100
223 #define DPARM_NARROW 0x0080
224 #define DPARM_ASYNC 0x0040
225 #define DPARM_PPR 0x0020
226 #define DPARM_DEFAULT (0xFF00 & ~DPARM_QFRZ)
227 #define DPARM_SAFE_DFLT (DPARM_DEFAULT & ~(DPARM_WIDE|DPARM_SYNC|DPARM_TQING))
229 /* technically, not really correct, as they need to be rated based upon clock */
230 #define ISP_80M_SYNCPARMS 0x0c09
231 #define ISP_40M_SYNCPARMS 0x0c0a
232 #define ISP_20M_SYNCPARMS 0x0c0c
233 #define ISP_20M_SYNCPARMS_1040 0x080c
234 #define ISP_10M_SYNCPARMS 0x0c19
235 #define ISP_08M_SYNCPARMS 0x0c25
236 #define ISP_05M_SYNCPARMS 0x0c32
237 #define ISP_04M_SYNCPARMS 0x0c41
240 * Fibre Channel Specifics
242 /* These are for non-2K Login Firmware cards */
243 #define FL_ID 0x7e /* FL_Port Special ID */
244 #define SNS_ID 0x80 /* SNS Server Special ID */
247 /* Use this handle for the base for multi-id firmware SNS logins */
248 #define NPH_SNS_HDLBASE 0x400
250 /* These are for 2K Login Firmware cards */
251 #define NPH_RESERVED 0x7F0 /* begin of reserved N-port handles */
252 #define NPH_MGT_ID 0x7FA /* Management Server Special ID */
253 #define NPH_SNS_ID 0x7FC /* SNS Server Special ID */
254 #define NPH_FABRIC_CTLR 0x7FD /* Fabric Controller (0xFFFFFD) */
255 #define NPH_FL_ID 0x7FE /* F Port Special ID (0xFFFFFE) */
256 #define NPH_IP_BCST 0x7ff /* IP Broadcast Special ID (0xFFFFFF) */
257 #define NPH_MAX_2K 0x800
260 * "Unassigned" handle to be used internally
262 #define NIL_HANDLE 0xffff
265 * Limit for devices on an arbitrated loop.
267 #define LOCAL_LOOP_LIM 126
270 * Limit for (2K login) N-port handle amounts
272 #define MAX_NPORT_HANDLE 2048
277 #define INI_NONE ((uint64_t) 0)
278 #define ISP_NOCHAN 0xff
283 #define MANAGEMENT_PORT_ID 0xFFFFFA
284 #define SNS_PORT_ID 0xFFFFFC
285 #define FABRIC_PORT_ID 0xFFFFFE
286 #define PORT_ANY 0xFFFFFF
288 #define DOMAIN_CONTROLLER_BASE 0xFFFC00
289 #define DOMAIN_CONTROLLER_END 0xFFFCFF
294 * Most QLogic initiator or target have 32 bit handles associated with them.
295 * We want to have a quick way to index back and forth between a local SCSI
296 * command context and what the firmware is passing back to us. We also
297 * want to avoid working on stale information. This structure handles both
298 * at the expense of some local memory.
300 * The handle is architected thusly:
302 * 0 means "free handle"
303 * bits 0..12 index commands
304 * bits 13..15 bits index usage
305 * bits 16..31 contain a rolling sequence
310 void * cmd; /* associated command context */
311 uint32_t handle; /* handle associated with this command */
313 #define ISP_HANDLE_FREE 0x00000000
314 #define ISP_HANDLE_CMD_MASK 0x00001fff
315 #define ISP_HANDLE_USAGE_MASK 0x0000e000
316 #define ISP_HANDLE_USAGE_SHIFT 13
317 #define ISP_H2HT(hdl) ((hdl & ISP_HANDLE_USAGE_MASK) >> ISP_HANDLE_USAGE_SHIFT)
318 # define ISP_HANDLE_NONE 0
319 # define ISP_HANDLE_INITIATOR 1
320 # define ISP_HANDLE_TARGET 2
321 #define ISP_HANDLE_SEQ_MASK 0xffff0000
322 #define ISP_HANDLE_SEQ_SHIFT 16
323 #define ISP_H2SEQ(hdl) ((hdl & ISP_HANDLE_SEQ_MASK) >> ISP_HANDLE_SEQ_SHIFT)
324 #define ISP_VALID_INI_HANDLE(c, hdl) \
325 (ISP_H2HT(hdl) == ISP_HANDLE_INITIATOR && (hdl & ISP_HANDLE_CMD_MASK) < (c)->isp_maxcmds && \
326 ISP_H2SEQ(hdl) == ISP_H2SEQ((c)->isp_xflist[hdl & ISP_HANDLE_CMD_MASK].handle))
327 #ifdef ISP_TARGET_MODE
328 #define ISP_VALID_TGT_HANDLE(c, hdl) \
329 (ISP_H2HT(hdl) == ISP_HANDLE_TARGET && (hdl & ISP_HANDLE_CMD_MASK) < (c)->isp_maxcmds && \
330 ISP_H2SEQ(hdl) == ISP_H2SEQ((c)->isp_tgtlist[hdl & ISP_HANDLE_CMD_MASK].handle))
331 #define ISP_VALID_HANDLE(c, hdl) \
332 (ISP_VALID_INI_HANDLE((c), hdl) || ISP_VALID_TGT_HANDLE((c), hdl))
334 #define ISP_VALID_HANDLE ISP_VALID_INI_HANDLE
336 #define ISP_BAD_HANDLE_INDEX 0xffffffff
340 * FC Port Database entry.
342 * It has a handle that the f/w uses to address commands to a device.
343 * This handle's value may be assigned by the firmware (e.g., for local loop
344 * devices) or by the driver (e.g., for fabric devices).
346 * It has a state. If the state if VALID, that means that we've logged into
347 * the device. We also *may* have a initiator map index entry. This is a value
348 * from 0..MAX_FC_TARG that is used to index into the isp_dev_map array. If
349 * the value therein is non-zero, then that value minus one is used to index
350 * into the Port Database to find the handle for forming commands. There is
351 * back-index minus one value within to Port Database entry that tells us
352 * which entry in isp_dev_map points to us (to avoid searching).
354 * Local loop devices the firmware automatically performs PLOGI on for us
355 * (which is why that handle is imposed upon us). Fabric devices we assign
356 * a handle to and perform the PLOGI on.
358 * When a PORT DATABASE CHANGED asynchronous event occurs, we mark all VALID
359 * entries as PROBATIONAL. This allows us, if policy says to, just keep track
360 * of devices whose handles change but are otherwise the same device (and
361 * thus keep 'target' constant).
363 * In any case, we search all possible local loop handles. For each one that
364 * has a port database entity returned, we search for any PROBATIONAL entry
365 * that matches it and update as appropriate. Otherwise, as a new entry, we
366 * find room for it in the Port Database. We *try* and use the handle as the
367 * index to put it into the Database, but that's just an optimization. We mark
368 * the entry VALID and make sure that the target index is updated and correct.
370 * When we get done searching the local loop, we then search similarily for
371 * a list of devices we've gotten from the fabric name controller (if we're
372 * on a fabric). VALID marking is also done similarily.
374 * When all of this is done, we can march through the database and clean up
375 * any entry that is still PROBATIONAL (these represent devices which have
376 * departed). Then we're done and can resume normal operations.
378 * Negative invariants that we try and test for are:
380 * + There can never be two non-NIL entries with the same { Port, Node } WWN
383 * + There can never be two non-NIL entries with the same handle.
385 * + There can never be two non-NIL entries which have the same dev_map_idx
390 * This is the handle that the firmware needs in order for us to
391 * send commands to the device. For pre-24XX cards, this would be
397 * The dev_map_idx, if nonzero, is the system virtual target ID (+1)
398 * as a cross-reference with the isp_dev_map.
400 * A device is 'autologin' if the firmware automatically logs into
401 * it (re-logins as needed). Basically, local private loop devices.
403 * PRLI word 3 parameters contains role as well as other things.
405 * The state is the current state of this entry.
407 * Portid is obvious, as are node && port WWNs. The new_role and
408 * new_portid is for when we are pending a change.
410 * The 'target_mode' tag means that this entry arrived via a
411 * target mode command and is immune from normal flushing rules.
412 * You should also never see anything with an initiator role
415 uint16_t prli_word3; /* PRLI parameters */
416 uint16_t new_prli_word3; /* Incoming new PRLI parameters */
417 uint16_t dev_map_idx : 12,
418 autologin : 1, /* F/W does PLOGI/PLOGO */
426 dirty : 1, /* commands have been run */
433 #define FC_PORTDB_STATE_NIL 0
434 #define FC_PORTDB_STATE_PROBATIONAL 1
435 #define FC_PORTDB_STATE_DEAD 2
436 #define FC_PORTDB_STATE_CHANGED 3
437 #define FC_PORTDB_STATE_NEW 4
438 #define FC_PORTDB_STATE_PENDING_VALID 5
439 #define FC_PORTDB_STATE_ZOMBIE 6
440 #define FC_PORTDB_STATE_VALID 7
443 * FC card specific information
445 * This structure is replicated across multiple channels for multi-id
446 * capapble chipsets, with some entities different on a per-channel basis.
456 isp_loopstate : 4, /* Current Loop State */
457 isp_fwstate : 4, /* ISP F/W state */
458 isp_topo : 3, /* Connection Type */
462 isp_portid : 24; /* S_ID */
465 uint16_t isp_fwoptions;
466 uint16_t isp_xfwoptions;
467 uint16_t isp_zfwoptions;
468 uint16_t isp_loopid; /* hard loop id */
469 uint16_t isp_sns_hdl; /* N-port handle for SNS */
470 uint16_t isp_lasthdl; /* only valid for channel 0 */
471 uint16_t isp_maxalloc;
472 uint16_t isp_fabric_params;
473 uint8_t isp_retry_delay;
474 uint8_t isp_retry_count;
477 * Current active WWNN/WWPN
485 uint64_t isp_wwnn_nvram;
486 uint64_t isp_wwpn_nvram;
491 fcportdb_t portdb[MAX_FC_TARG];
494 * This maps system virtual 'target' id to a portdb entry.
496 * The mapping function is to take any non-zero entry and
497 * subtract one to get the portdb index. This means that
498 * entries which are zero are unmapped (i.e., don't exist).
500 uint16_t isp_dev_map[MAX_FC_TARG];
502 #ifdef ISP_TARGET_MODE
504 * This maps N-Port Handle to portdb entry so we
505 * don't have to search for every incoming command.
507 * The mapping function is to take any non-zero entry and
508 * subtract one to get the portdb index. This means that
509 * entries which are zero are unmapped (i.e., don't exist).
511 uint16_t isp_tgt_map[MAX_NPORT_HANDLE];
515 * Scratch DMA mapped in area to fetch Port Database stuff, etc.
518 XS_DMA_ADDR_T isp_scdma;
521 #define FW_CONFIG_WAIT 0
522 #define FW_WAIT_AL_PA 1
523 #define FW_WAIT_LOGIN 2
525 #define FW_LOSS_OF_SYNC 4
528 #define FW_NON_PART 7
531 #define LOOP_LIP_RCVD 1
532 #define LOOP_PDB_RCVD 2
533 #define LOOP_SCANNING_LOOP 3
534 #define LOOP_LSCAN_DONE 4
535 #define LOOP_SCANNING_FABRIC 5
536 #define LOOP_FSCAN_DONE 6
537 #define LOOP_SYNCING_PDB 7
540 #define TOPO_NL_PORT 0
541 #define TOPO_FL_PORT 1
542 #define TOPO_N_PORT 2
543 #define TOPO_F_PORT 3
544 #define TOPO_PTP_STUB 4
547 * Soft Structure per host adapter
551 * Platform (OS) specific data
553 struct isposinfo isp_osinfo;
556 * Pointer to bus specific functions and data
558 struct ispmdvec * isp_mdvec;
561 * (Mostly) nonvolatile state. Board specific parameters
562 * may contain some volatile state (e.g., current loop state).
565 void * isp_param; /* type specific */
566 uint64_t isp_fwattr; /* firmware attributes */
567 uint16_t isp_fwrev[3]; /* Loaded F/W revision */
568 uint16_t isp_maxcmds; /* max possible I/O cmds */
569 uint8_t isp_type; /* HBA Chip Type */
570 uint8_t isp_revision; /* HBA Chip H/W Revision */
571 uint16_t isp_nchan; /* number of channels */
572 uint32_t isp_maxluns; /* maximum luns supported */
574 uint32_t isp_clock : 8, /* input clock */
576 isp_port : 1, /* 23XX/24XX only */
577 isp_open : 1, /* opened (ioctl) */
578 isp_bustype : 1, /* SBus or PCI */
579 isp_loaded_fw : 1, /* loaded firmware */
580 isp_dblev : 16; /* debug log mask */
583 uint32_t isp_confopts; /* config options */
585 uint32_t isp_rqstinrp; /* register for REQINP */
586 uint32_t isp_rqstoutrp; /* register for REQOUTP */
587 uint32_t isp_respinrp; /* register for RESINP */
588 uint32_t isp_respoutrp; /* register for RESOUTP */
593 uint64_t isp_intcnt; /* total int count */
594 uint64_t isp_intbogus; /* spurious int count */
595 uint64_t isp_intmboxc; /* mbox completions */
596 uint64_t isp_intoasync; /* other async */
597 uint64_t isp_rsltccmplt; /* CMDs on result q */
598 uint64_t isp_fphccmplt; /* CMDs via fastpost */
599 uint16_t isp_rscchiwater;
600 uint16_t isp_fpcchiwater;
601 NANOTIME_T isp_init_time; /* time were last initialized */
607 volatile uint32_t : 8,
611 isp_mboxbsy : 1, /* mailbox command active */
613 isp_nactive : 16; /* how many commands active */
614 volatile mbreg_t isp_curmbx; /* currently active mailbox command */
615 volatile uint32_t isp_reqodx; /* index of last ISP pickup */
616 volatile uint32_t isp_reqidx; /* index of next request */
617 volatile uint32_t isp_residx; /* index of next result */
618 volatile uint32_t isp_resodx; /* index of next result */
619 volatile uint32_t isp_obits; /* mailbox command output */
620 volatile uint32_t isp_serno; /* rolling serial number */
621 volatile uint16_t isp_mboxtmp[MAX_MAILBOX];
622 volatile uint16_t isp_lastmbxcmd; /* last mbox command sent */
623 volatile uint16_t isp_mbxwrk0;
624 volatile uint16_t isp_mbxwrk1;
625 volatile uint16_t isp_mbxwrk2;
626 volatile uint16_t isp_mbxwrk8;
627 volatile uint16_t isp_seqno; /* running sequence number */
631 * Active commands are stored here, indexed by handle functions.
633 isp_hdl_t *isp_xflist;
634 isp_hdl_t *isp_xffree;
636 #ifdef ISP_TARGET_MODE
638 * Active target commands are stored here, indexed by handle functions.
640 isp_hdl_t *isp_tgtlist;
641 isp_hdl_t *isp_tgtfree;
645 * request/result queue pointers and DMA handles for them.
649 XS_DMA_ADDR_T isp_rquest_dma;
650 XS_DMA_ADDR_T isp_result_dma;
651 #ifdef ISP_TARGET_MODE
654 XS_DMA_ADDR_T isp_atioq_dma;
658 #define SDPARAM(isp, chan) (&((sdparam *)(isp)->isp_param)[(chan)])
659 #define FCPARAM(isp, chan) (&((fcparam *)(isp)->isp_param)[(chan)])
661 #define ISP_SET_SENDMARKER(isp, chan, val) \
663 FCPARAM(isp, chan)->sendmarker = val; \
665 SDPARAM(isp, chan)->sendmarker = val; \
668 #define ISP_TST_SENDMARKER(isp, chan) \
670 FCPARAM(isp, chan)->sendmarker != 0 : \
671 SDPARAM(isp, chan)->sendmarker != 0)
674 * ISP Driver Run States
676 #define ISP_NILSTATE 0
677 #define ISP_CRASHED 1
678 #define ISP_RESETSTATE 2
679 #define ISP_INITSTATE 3
680 #define ISP_RUNSTATE 4
683 * ISP Runtime Configuration Options
685 #define ISP_CFG_FULL_DUPLEX 0x01 /* Full Duplex (Fibre Channel only) */
686 #define ISP_CFG_PORT_PREF 0x0c /* Mask for Port Prefs (all FC except 2100) */
687 #define ISP_CFG_LPORT 0x00 /* prefer {N/F}L-Port connection */
688 #define ISP_CFG_NPORT 0x04 /* prefer {N/F}-Port connection */
689 #define ISP_CFG_NPORT_ONLY 0x08 /* insist on {N/F}-Port connection */
690 #define ISP_CFG_LPORT_ONLY 0x0c /* insist on {N/F}L-Port connection */
691 #define ISP_CFG_ONEGB 0x10 /* force 1GB connection (23XX only) */
692 #define ISP_CFG_TWOGB 0x20 /* force 2GB connection (23XX only) */
693 #define ISP_CFG_NORELOAD 0x80 /* don't download f/w */
694 #define ISP_CFG_NONVRAM 0x40 /* ignore NVRAM */
695 #define ISP_CFG_NOFCTAPE 0x100 /* disable FC-Tape */
696 #define ISP_CFG_FCTAPE 0x200 /* enable FC-Tape */
697 #define ISP_CFG_OWNFSZ 0x400 /* override NVRAM frame size */
698 #define ISP_CFG_OWNLOOPID 0x800 /* override NVRAM loopid */
699 #define ISP_CFG_OWNEXCTHROTTLE 0x1000 /* override NVRAM execution throttle */
700 #define ISP_CFG_FOURGB 0x2000 /* force 4GB connection (24XX only) */
701 #define ISP_CFG_EIGHTGB 0x4000 /* force 8GB connection (25XX only) */
702 #define ISP_CFG_SIXTEENGB 0x8000 /* force 16GB connection (82XX only) */
705 * For each channel, the outer layers should know what role that channel
706 * will take: ISP_ROLE_NONE, ISP_ROLE_INITIATOR, ISP_ROLE_TARGET,
709 * If you set ISP_ROLE_NONE, the cards will be reset, new firmware loaded,
710 * NVRAM read, and defaults set, but any further initialization (e.g.
711 * INITIALIZE CONTROL BLOCK commands for 2X00 cards) won't be done.
713 * If INITIATOR MODE isn't set, attempts to run commands will be stopped
714 * at isp_start and completed with the equivalent of SELECTION TIMEOUT.
716 * If TARGET MODE is set, it doesn't mean that the rest of target mode support
717 * needs to be enabled, or will even work. What happens with the 2X00 cards
718 * here is that if you have enabled it with TARGET MODE as part of the ICB
719 * options, but you haven't given the f/w any ram resources for ATIOs or
720 * Immediate Notifies, the f/w just handles what it can and you never see
721 * anything. Basically, it sends a single byte of data (the first byte,
722 * which you can set as part of the INITIALIZE CONTROL BLOCK command) for
723 * INQUIRY, and sends back QUEUE FULL status for any other command.
726 #define ISP_ROLE_NONE 0x0
727 #define ISP_ROLE_TARGET 0x1
728 #define ISP_ROLE_INITIATOR 0x2
729 #define ISP_ROLE_BOTH (ISP_ROLE_TARGET|ISP_ROLE_INITIATOR)
730 #define ISP_ROLE_EITHER ISP_ROLE_BOTH
731 #ifndef ISP_DEFAULT_ROLES
733 * Counterintuitively, we prefer to default to role 'none'
734 * if we are enable target mode support. This gives us the
735 * maximum flexibility as to which port will do what.
737 #ifdef ISP_TARGET_MODE
738 #define ISP_DEFAULT_ROLES ISP_ROLE_NONE
740 #define ISP_DEFAULT_ROLES ISP_ROLE_INITIATOR
746 * Firmware related defines
748 #define ISP_CODE_ORG 0x1000 /* default f/w code start */
749 #define ISP_CODE_ORG_2300 0x0800 /* ..except for 2300s */
750 #define ISP_CODE_ORG_2400 0x100000 /* ..and 2400s */
751 #define ISP_FW_REV(maj, min, mic) ((maj << 24) | (min << 16) | mic)
752 #define ISP_FW_MAJOR(code) ((code >> 24) & 0xff)
753 #define ISP_FW_MINOR(code) ((code >> 16) & 0xff)
754 #define ISP_FW_MICRO(code) ((code >> 8) & 0xff)
755 #define ISP_FW_REVX(xp) ((xp[0]<<24) | (xp[1] << 16) | xp[2])
756 #define ISP_FW_MAJORX(xp) (xp[0])
757 #define ISP_FW_MINORX(xp) (xp[1])
758 #define ISP_FW_MICROX(xp) (xp[2])
759 #define ISP_FW_NEWER_THAN(i, major, minor, micro) \
760 (ISP_FW_REVX((i)->isp_fwrev) > ISP_FW_REV(major, minor, micro))
761 #define ISP_FW_OLDER_THAN(i, major, minor, micro) \
762 (ISP_FW_REVX((i)->isp_fwrev) < ISP_FW_REV(major, minor, micro))
765 * Bus (implementation) types
767 #define ISP_BT_PCI 0 /* PCI Implementations */
768 #define ISP_BT_SBUS 1 /* SBus Implementations */
771 * If we have not otherwise defined SBus support away make sure
772 * it is defined here such that the code is included as default
774 #ifndef ISP_SBUS_SUPPORTED
775 #define ISP_SBUS_SUPPORTED 1
781 #define ISP_HA_SCSI 0xf
782 #define ISP_HA_SCSI_UNKNOWN 0x1
783 #define ISP_HA_SCSI_1020 0x2
784 #define ISP_HA_SCSI_1020A 0x3
785 #define ISP_HA_SCSI_1040 0x4
786 #define ISP_HA_SCSI_1040A 0x5
787 #define ISP_HA_SCSI_1040B 0x6
788 #define ISP_HA_SCSI_1040C 0x7
789 #define ISP_HA_SCSI_1240 0x8
790 #define ISP_HA_SCSI_1080 0x9
791 #define ISP_HA_SCSI_1280 0xa
792 #define ISP_HA_SCSI_10160 0xb
793 #define ISP_HA_SCSI_12160 0xc
794 #define ISP_HA_FC 0xf0
795 #define ISP_HA_FC_2100 0x10
796 #define ISP_HA_FC_2200 0x20
797 #define ISP_HA_FC_2300 0x30
798 #define ISP_HA_FC_2312 0x40
799 #define ISP_HA_FC_2322 0x50
800 #define ISP_HA_FC_2400 0x60
801 #define ISP_HA_FC_2500 0x70
803 #define IS_SCSI(isp) (isp->isp_type & ISP_HA_SCSI)
804 #define IS_1020(isp) (isp->isp_type < ISP_HA_SCSI_1240)
805 #define IS_1240(isp) (isp->isp_type == ISP_HA_SCSI_1240)
806 #define IS_1080(isp) (isp->isp_type == ISP_HA_SCSI_1080)
807 #define IS_1280(isp) (isp->isp_type == ISP_HA_SCSI_1280)
808 #define IS_10160(isp) (isp->isp_type == ISP_HA_SCSI_10160)
809 #define IS_12160(isp) (isp->isp_type == ISP_HA_SCSI_12160)
811 #define IS_12X0(isp) (IS_1240(isp) || IS_1280(isp))
812 #define IS_1X160(isp) (IS_10160(isp) || IS_12160(isp))
813 #define IS_DUALBUS(isp) (IS_12X0(isp) || IS_12160(isp))
814 #define IS_ULTRA2(isp) (IS_1080(isp) || IS_1280(isp) || IS_1X160(isp))
815 #define IS_ULTRA3(isp) (IS_1X160(isp))
817 #define IS_FC(isp) ((isp)->isp_type & ISP_HA_FC)
818 #define IS_2100(isp) ((isp)->isp_type == ISP_HA_FC_2100)
819 #define IS_2200(isp) ((isp)->isp_type == ISP_HA_FC_2200)
820 #define IS_23XX(isp) ((isp)->isp_type >= ISP_HA_FC_2300 && \
821 (isp)->isp_type < ISP_HA_FC_2400)
822 #define IS_2300(isp) ((isp)->isp_type == ISP_HA_FC_2300)
823 #define IS_2312(isp) ((isp)->isp_type == ISP_HA_FC_2312)
824 #define IS_2322(isp) ((isp)->isp_type == ISP_HA_FC_2322)
825 #define IS_24XX(isp) ((isp)->isp_type >= ISP_HA_FC_2400)
826 #define IS_25XX(isp) ((isp)->isp_type >= ISP_HA_FC_2500)
831 #define DMA_WD3(x) (((uint16_t)(((uint64_t)x) >> 48)) & 0xffff)
832 #define DMA_WD2(x) (((uint16_t)(((uint64_t)x) >> 32)) & 0xffff)
833 #define DMA_WD1(x) ((uint16_t)((x) >> 16) & 0xffff)
834 #define DMA_WD0(x) ((uint16_t)((x) & 0xffff))
836 #define DMA_LO32(x) ((uint32_t) (x))
837 #define DMA_HI32(x) ((uint32_t)(((uint64_t)x) >> 32))
840 * Core System Function Prototypes
844 * Reset Hardware. Totally. Assumes that you'll follow this with a call to isp_init.
846 void isp_reset(ispsoftc_t *, int);
849 * Initialize Hardware to known state
851 void isp_init(ispsoftc_t *);
854 * Reset the ISP and call completion for any orphaned commands.
856 void isp_reinit(ispsoftc_t *, int);
859 * Internal Interrupt Service Routine
861 * The outer layers do the spade work to get the appropriate status register,
862 * semaphore register and first mailbox register (if appropriate). This also
863 * means that most spurious/bogus interrupts not for us can be filtered first.
865 void isp_intr(ispsoftc_t *, uint32_t, uint16_t, uint16_t);
869 * Command Entry Point- Platform Dependent layers call into this
871 int isp_start(XS_T *);
873 /* these values are what isp_start returns */
874 #define CMD_COMPLETE 101 /* command completed */
875 #define CMD_EAGAIN 102 /* busy- maybe retry later */
876 #define CMD_QUEUED 103 /* command has been queued for execution */
877 #define CMD_RQLATER 104 /* requeue this command later */
880 * Command Completion Point- Core layers call out from this with completed cmds
882 void isp_done(XS_T *);
885 * Platform Dependent to External to Internal Control Function
887 * Assumes locks are held on entry. You should note that with many of
888 * these commands locks may be released while this function is called.
890 * ... ISPCTL_RESET_BUS, int channel);
891 * Reset BUS on this channel
892 * ... ISPCTL_RESET_DEV, int channel, int target);
893 * Reset Device on this channel at this target.
894 * ... ISPCTL_ABORT_CMD, XS_T *xs);
895 * Abort active transaction described by xs.
896 * ... IPCTL_UPDATE_PARAMS);
897 * Update any operating parameters (speed, etc.)
898 * ... ISPCTL_FCLINK_TEST, int channel);
899 * Test FC link status on this channel
900 * ... ISPCTL_SCAN_FABRIC, int channel);
901 * Scan fabric on this channel
902 * ... ISPCTL_SCAN_LOOP, int channel);
903 * Scan local loop on this channel
904 * ... ISPCTL_PDB_SYNC, int channel);
905 * Synchronize port database on this channel
906 * ... ISPCTL_SEND_LIP, int channel);
907 * Send a LIP on this channel
908 * ... ISPCTL_GET_NAMES, int channel, int np, uint64_t *wwnn, uint64_t *wwpn)
909 * Get a WWNN/WWPN for this N-port handle on this channel
910 * ... ISPCTL_RUN_MBOXCMD, mbreg_t *mbp)
911 * Run this mailbox command
912 * ... ISPCTL_GET_PDB, int channel, int nphandle, isp_pdb_t *pdb)
913 * Get PDB on this channel for this N-port handle
914 * ... ISPCTL_PLOGX, isp_plcmd_t *)
915 * Performa a port login/logout
917 * ISPCTL_PDB_SYNC is somewhat misnamed. It actually is the final step, in
918 * order, of ISPCTL_FCLINK_TEST, ISPCTL_SCAN_FABRIC, and ISPCTL_SCAN_LOOP.
919 * The main purpose of ISPCTL_PDB_SYNC is to complete management of logging
920 * and logging out of fabric devices (if one is on a fabric) and then marking
921 * the 'loop state' as being ready to now be used for sending commands to
922 * devices. Originally fabric name server and local loop scanning were
923 * part of this function. It's now been separated to allow for finer control.
929 ISPCTL_UPDATE_PARAMS,
940 int isp_control(ispsoftc_t *, ispctl_t, ...);
943 * Platform Dependent to Internal to External Control Function
947 ISPASYNC_NEW_TGT_PARAMS, /* SPI New Target Parameters */
948 ISPASYNC_BUS_RESET, /* All Bus Was Reset */
949 ISPASYNC_LOOP_DOWN, /* FC Loop Down */
950 ISPASYNC_LOOP_UP, /* FC Loop Up */
951 ISPASYNC_LIP, /* FC LIP Received */
952 ISPASYNC_LOOP_RESET, /* FC Loop Reset Received */
953 ISPASYNC_CHANGE_NOTIFY, /* FC Change Notification */
954 ISPASYNC_DEV_ARRIVED, /* FC Device Arrived */
955 ISPASYNC_DEV_CHANGED, /* FC Device Changed */
956 ISPASYNC_DEV_STAYED, /* FC Device Stayed */
957 ISPASYNC_DEV_GONE, /* FC Device Departure */
958 ISPASYNC_TARGET_NOTIFY, /* All target async notification */
959 ISPASYNC_TARGET_NOTIFY_ACK, /* All target notify ack required */
960 ISPASYNC_TARGET_ACTION, /* All target action requested */
961 ISPASYNC_FW_CRASH, /* All Firmware has crashed */
962 ISPASYNC_FW_RESTARTED /* All Firmware has been restarted */
964 void isp_async(ispsoftc_t *, ispasync_t, ...);
966 #define ISPASYNC_CHANGE_PDB 0
967 #define ISPASYNC_CHANGE_SNS 1
968 #define ISPASYNC_CHANGE_OTHER 2
971 * Platform Independent Error Prinout
973 void isp_prt_endcmd(ispsoftc_t *, XS_T *);
976 * Platform Dependent Error and Debug Printout
978 * Two required functions for each platform must be provided:
980 * void isp_prt(ispsoftc_t *, int level, const char *, ...)
981 * void isp_xs_prt(ispsoftc_t *, XS_T *, int level, const char *, ...)
983 * but due to compiler differences on different platforms this won't be
984 * formally defined here. Instead, they go in each platform definition file.
987 #define ISP_LOGALL 0x0 /* log always */
988 #define ISP_LOGCONFIG 0x1 /* log configuration messages */
989 #define ISP_LOGINFO 0x2 /* log informational messages */
990 #define ISP_LOGWARN 0x4 /* log warning messages */
991 #define ISP_LOGERR 0x8 /* log error messages */
992 #define ISP_LOGDEBUG0 0x10 /* log simple debug messages */
993 #define ISP_LOGDEBUG1 0x20 /* log intermediate debug messages */
994 #define ISP_LOGDEBUG2 0x40 /* log most debug messages */
995 #define ISP_LOGDEBUG3 0x80 /* log high frequency debug messages */
996 #define ISP_LOG_SANCFG 0x100 /* log SAN configuration */
997 #define ISP_LOG_CWARN 0x200 /* log SCSI command "warnings" (e.g., check conditions) */
998 #define ISP_LOG_WARN1 0x400 /* log WARNS we might be interested at some time */
999 #define ISP_LOGTINFO 0x1000 /* log informational messages (target mode) */
1000 #define ISP_LOGTDEBUG0 0x2000 /* log simple debug messages (target mode) */
1001 #define ISP_LOGTDEBUG1 0x4000 /* log intermediate debug messages (target) */
1002 #define ISP_LOGTDEBUG2 0x8000 /* log all debug messages (target) */
1005 * Each Platform provides it's own isposinfo substructure of the ispsoftc
1008 * Each platform must also provide the following macros/defines:
1011 * ISP_FC_SCRLEN FC scratch area DMA length
1013 * ISP_MEMZERO(dst, src) platform zeroing function
1014 * ISP_MEMCPY(dst, src, count) platform copying function
1015 * ISP_SNPRINTF(buf, bufsize, fmt, ...) snprintf
1016 * ISP_DELAY(usecs) microsecond spindelay function
1017 * ISP_SLEEP(isp, usecs) microsecond sleep function
1019 * ISP_INLINE ___inline or not- depending on how
1020 * good your debugger is
1021 * ISP_MIN shorthand for ((a) < (b))? (a) : (b)
1023 * NANOTIME_T nanosecond time type
1025 * GET_NANOTIME(NANOTIME_T *) get current nanotime.
1027 * GET_NANOSEC(NANOTIME_T *) get uint64_t from NANOTIME_T
1029 * NANOTIME_SUB(NANOTIME_T *, NANOTIME_T *)
1030 * subtract two NANOTIME_T values
1032 * MAXISPREQUEST(ispsoftc_t *) maximum request queue size
1033 * for this particular board type
1035 * MEMORYBARRIER(ispsoftc_t *, barrier_type, offset, size, chan)
1037 * Function/Macro the provides memory synchronization on
1038 * various objects so that the ISP's and the system's view
1039 * of the same object is consistent.
1041 * MBOX_ACQUIRE(ispsoftc_t *) acquire lock on mailbox regs
1042 * MBOX_WAIT_COMPLETE(ispsoftc_t *, mbreg_t *) wait for cmd to be done
1043 * MBOX_NOTIFY_COMPLETE(ispsoftc_t *) notification of mbox cmd donee
1044 * MBOX_RELEASE(ispsoftc_t *) release lock on mailbox regs
1046 * FC_SCRATCH_ACQUIRE(ispsoftc_t *, chan) acquire lock on FC scratch area
1047 * return -1 if you cannot
1048 * FC_SCRATCH_RELEASE(ispsoftc_t *, chan) acquire lock on FC scratch area
1050 * FCP_NEXT_CRN(ispsoftc_t *, XS_T *, rslt, channel, target, lun) generate the next command reference number. XS_T * may be null.
1052 * SCSI_GOOD SCSI 'Good' Status
1053 * SCSI_CHECK SCSI 'Check Condition' Status
1054 * SCSI_BUSY SCSI 'Busy' Status
1055 * SCSI_QFULL SCSI 'Queue Full' Status
1057 * XS_T Platform SCSI transaction type (i.e., command for HBA)
1058 * XS_DMA_ADDR_T Platform PCI DMA Address Type
1059 * XS_GET_DMA_SEG(..) Get 32 bit dma segment list value
1060 * XS_GET_DMA64_SEG(..) Get 64 bit dma segment list value
1061 * XS_ISP(xs) gets an instance out of an XS_T
1062 * XS_CHANNEL(xs) gets the channel (bus # for DUALBUS cards) ""
1063 * XS_TGT(xs) gets the target ""
1064 * XS_LUN(xs) gets the lun ""
1065 * XS_CDBP(xs) gets a pointer to the scsi CDB ""
1066 * XS_CDBLEN(xs) gets the CDB's length ""
1067 * XS_XFRLEN(xs) gets the associated data transfer length ""
1068 * XS_TIME(xs) gets the time (in milliseconds) for this command
1069 * XS_GET_RESID(xs) gets the current residual count
1070 * XS_GET_RESID(xs, resid) sets the current residual count
1071 * XS_STSP(xs) gets a pointer to the SCSI status byte ""
1072 * XS_SNSP(xs) gets a pointer to the associate sense data
1073 * XS_TOT_SNSLEN(xs) gets the total length of sense data storage
1074 * XS_CUR_SNSLEN(xs) gets the currently used lenght of sense data storage
1075 * XS_SNSKEY(xs) dereferences XS_SNSP to get the current stored Sense Key
1076 * XS_SNSASC(xs) dereferences XS_SNSP to get the current stored Additional Sense Code
1077 * XS_SNSASCQ(xs) dereferences XS_SNSP to get the current stored Additional Sense Code Qualifier
1078 * XS_TAG_P(xs) predicate of whether this command should be tagged
1079 * XS_TAG_TYPE(xs) which type of tag to use
1080 * XS_SETERR(xs) set error state
1082 * HBA_NOERROR command has no erros
1083 * HBA_BOTCH hba botched something
1084 * HBA_CMDTIMEOUT command timed out
1085 * HBA_SELTIMEOUT selection timed out (also port logouts for FC)
1086 * HBA_TGTBSY target returned a BUSY status
1087 * HBA_BUSRESET bus reset destroyed command
1088 * HBA_ABORTED command was aborted (by request)
1089 * HBA_DATAOVR a data overrun was detected
1090 * HBA_ARQFAIL Automatic Request Sense failed
1092 * XS_ERR(xs) return current error state
1093 * XS_NOERR(xs) there is no error currently set
1094 * XS_INITERR(xs) initialize error state
1096 * XS_SAVE_SENSE(xs, sp, total_len, this_len) save sense data (total and current amount)
1098 * XS_APPEND_SENSE(xs, sp, len) append more sense data
1100 * XS_SENSE_VALID(xs) indicates whether sense is valid
1102 * DEFAULT_FRAMESIZE(ispsoftc_t *) Default Frame Size
1103 * DEFAULT_EXEC_THROTTLE(ispsoftc_t *) Default Execution Throttle
1105 * GET_DEFAULT_ROLE(ispsoftc_t *, int) Get Default Role for a channel
1106 * SET_DEFAULT_ROLE(ispsoftc_t *, int, int) Set Default Role for a channel
1107 * DEFAULT_IID(ispsoftc_t *, int) Default SCSI initiator ID
1108 * DEFAULT_LOOPID(ispsoftc_t *, int) Default FC Loop ID
1110 * These establish reasonable defaults for each platform.
1111 * These must be available independent of card NVRAM and are
1112 * to be used should NVRAM not be readable.
1114 * DEFAULT_NODEWWN(ispsoftc_t *, chan) Default FC Node WWN to use
1115 * DEFAULT_PORTWWN(ispsoftc_t *, chan) Default FC Port WWN to use
1117 * These defines are hooks to allow the setting of node and
1118 * port WWNs when NVRAM cannot be read or is to be overriden.
1120 * ACTIVE_NODEWWN(ispsoftc_t *, chan) FC Node WWN to use
1121 * ACTIVE_PORTWWN(ispsoftc_t *, chan) FC Port WWN to use
1123 * After NVRAM is read, these will be invoked to get the
1124 * node and port WWNs that will actually be used for this
1128 * ISP_IOXPUT_8(ispsoftc_t *, uint8_t srcval, uint8_t *dstptr)
1129 * ISP_IOXPUT_16(ispsoftc_t *, uint16_t srcval, uint16_t *dstptr)
1130 * ISP_IOXPUT_32(ispsoftc_t *, uint32_t srcval, uint32_t *dstptr)
1132 * ISP_IOXGET_8(ispsoftc_t *, uint8_t *srcptr, uint8_t dstrval)
1133 * ISP_IOXGET_16(ispsoftc_t *, uint16_t *srcptr, uint16_t dstrval)
1134 * ISP_IOXGET_32(ispsoftc_t *, uint32_t *srcptr, uint32_t dstrval)
1136 * ISP_SWIZZLE_NVRAM_WORD(ispsoftc_t *, uint16_t *)
1137 * ISP_SWIZZLE_NVRAM_LONG(ispsoftc_t *, uint32_t *)
1138 * ISP_SWAP16(ispsoftc_t *, uint16_t srcval)
1139 * ISP_SWAP32(ispsoftc_t *, uint32_t srcval)
1142 #ifdef ISP_TARGET_MODE
1144 * The functions below are for the publicly available
1145 * target mode functions that are internal to the Qlogic driver.
1149 * This function handles new response queue entry appropriate for target mode.
1151 int isp_target_notify(ispsoftc_t *, void *, uint32_t *);
1154 * This function externalizes the ability to acknowledge an Immediate Notify request.
1156 int isp_notify_ack(ispsoftc_t *, void *);
1159 * This function externalized acknowledging (success/fail) an ABTS frame
1161 int isp_acknak_abts(ispsoftc_t *, void *, int);
1164 * Enable/Disable/Modify a logical unit.
1165 * (softc, cmd, bus, tgt, lun, cmd_cnt, inotify_cnt)
1167 #define DFLT_CMND_CNT 0xff /* unmonitored */
1168 #define DFLT_INOT_CNT 0xff /* unmonitored */
1169 int isp_lun_cmd(ispsoftc_t *, int, int, int, int, int);
1172 * General request queue 'put' routine for target mode entries.
1174 int isp_target_put_entry(ispsoftc_t *isp, void *);
1177 * General routine to put back an ATIO entry-
1178 * used for replenishing f/w resource counts.
1179 * The argument is a pointer to a source ATIO
1182 int isp_target_put_atio(ispsoftc_t *, void *);
1185 * General routine to send a final CTIO for a command- used mostly for
1188 int isp_endcmd(ispsoftc_t *, ...);
1189 #define ECMD_SVALID 0x100
1190 #define ECMD_TERMINATE 0x200
1193 * Handle an asynchronous event
1195 * Return nonzero if the interrupt that generated this event has been dismissed.
1197 int isp_target_async(ispsoftc_t *, int, int);
1199 #endif /* _ISPVAR_H */