iwm - Clear Time Event active state, when receiving End Notification.

[FreeBSD/FreeBSD.git] / sys / dev / iwm / if_iwmreg.h

/*      $OpenBSD: if_iwmreg.h,v 1.4 2015/06/15 08:06:11 stsp Exp $      */
/*      $FreeBSD$ */

/******************************************************************************
 *
 * This file is provided under a dual BSD/GPLv2 license.  When using or
 * redistributing this file, you may do so under either license.
 *
 * GPL LICENSE SUMMARY
 *
 * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
 * USA
 *
 * The full GNU General Public License is included in this distribution
 * in the file called COPYING.
 *
 * Contact Information:
 *  Intel Linux Wireless <ilw@linux.intel.com>
 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 *
 * BSD LICENSE
 *
 * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 *  * Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *  * Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *  * Neither the name Intel Corporation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 *****************************************************************************/
#ifndef __IF_IWM_REG_H__
#define __IF_IWM_REG_H__

#define le16_to_cpup(_a_)       (le16toh(*(const uint16_t *)(_a_)))
#define le32_to_cpup(_a_)       (le32toh(*(const uint32_t *)(_a_)))

/*
 * BEGIN iwl-csr.h
 */

/*
 * CSR (control and status registers)
 *
 * CSR registers are mapped directly into PCI bus space, and are accessible
 * whenever platform supplies power to device, even when device is in
 * low power states due to driver-invoked device resets
 * (e.g. IWM_CSR_RESET_REG_FLAG_SW_RESET) or uCode-driven power-saving modes.
 *
 * Use iwl_write32() and iwl_read32() family to access these registers;
 * these provide simple PCI bus access, without waking up the MAC.
 * Do not use iwl_write_direct32() family for these registers;
 * no need to "grab nic access" via IWM_CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ.
 * The MAC (uCode processor, etc.) does not need to be powered up for accessing
 * the CSR registers.
 *
 * NOTE:  Device does need to be awake in order to read this memory
 *        via IWM_CSR_EEPROM and IWM_CSR_OTP registers
 */
#define IWM_CSR_HW_IF_CONFIG_REG    (0x000) /* hardware interface config */
#define IWM_CSR_INT_COALESCING      (0x004) /* accum ints, 32-usec units */
#define IWM_CSR_INT                 (0x008) /* host interrupt status/ack */
#define IWM_CSR_INT_MASK            (0x00c) /* host interrupt enable */
#define IWM_CSR_FH_INT_STATUS       (0x010) /* busmaster int status/ack*/
#define IWM_CSR_GPIO_IN             (0x018) /* read external chip pins */
#define IWM_CSR_RESET               (0x020) /* busmaster enable, NMI, etc*/
#define IWM_CSR_GP_CNTRL            (0x024)

/* 2nd byte of IWM_CSR_INT_COALESCING, not accessible via iwl_write32()! */
#define IWM_CSR_INT_PERIODIC_REG        (0x005)

/*
 * Hardware revision info
 * Bit fields:
 * 31-16:  Reserved
 *  15-4:  Type of device:  see IWM_CSR_HW_REV_TYPE_xxx definitions
 *  3-2:  Revision step:  0 = A, 1 = B, 2 = C, 3 = D
 *  1-0:  "Dash" (-) value, as in A-1, etc.
 */
#define IWM_CSR_HW_REV              (0x028)

/*
 * EEPROM and OTP (one-time-programmable) memory reads
 *
 * NOTE:  Device must be awake, initialized via apm_ops.init(),
 *        in order to read.
 */
#define IWM_CSR_EEPROM_REG          (0x02c)
#define IWM_CSR_EEPROM_GP           (0x030)
#define IWM_CSR_OTP_GP_REG          (0x034)

#define IWM_CSR_GIO_REG         (0x03C)
#define IWM_CSR_GP_UCODE_REG    (0x048)
#define IWM_CSR_GP_DRIVER_REG   (0x050)

/*
 * UCODE-DRIVER GP (general purpose) mailbox registers.
 * SET/CLR registers set/clear bit(s) if "1" is written.
 */
#define IWM_CSR_UCODE_DRV_GP1       (0x054)
#define IWM_CSR_UCODE_DRV_GP1_SET   (0x058)
#define IWM_CSR_UCODE_DRV_GP1_CLR   (0x05c)
#define IWM_CSR_UCODE_DRV_GP2       (0x060)

#define IWM_CSR_MBOX_SET_REG            (0x088)
#define IWM_CSR_MBOX_SET_REG_OS_ALIVE   0x20

#define IWM_CSR_LED_REG                 (0x094)
#define IWM_CSR_DRAM_INT_TBL_REG        (0x0A0)
#define IWM_CSR_MAC_SHADOW_REG_CTRL     (0x0A8) /* 6000 and up */


/* GIO Chicken Bits (PCI Express bus link power management) */
#define IWM_CSR_GIO_CHICKEN_BITS    (0x100)

/* Analog phase-lock-loop configuration  */
#define IWM_CSR_ANA_PLL_CFG         (0x20c)

/*
 * CSR Hardware Revision Workaround Register.  Indicates hardware rev;
 * "step" determines CCK backoff for txpower calculation.  Used for 4965 only.
 * See also IWM_CSR_HW_REV register.
 * Bit fields:
 *  3-2:  0 = A, 1 = B, 2 = C, 3 = D step
 *  1-0:  "Dash" (-) value, as in C-1, etc.
 */
#define IWM_CSR_HW_REV_WA_REG           (0x22C)

#define IWM_CSR_DBG_HPET_MEM_REG        (0x240)
#define IWM_CSR_DBG_LINK_PWR_MGMT_REG   (0x250)

/* Bits for IWM_CSR_HW_IF_CONFIG_REG */
#define IWM_CSR_HW_IF_CONFIG_REG_MSK_MAC_DASH   (0x00000003)
#define IWM_CSR_HW_IF_CONFIG_REG_MSK_MAC_STEP   (0x0000000C)
#define IWM_CSR_HW_IF_CONFIG_REG_MSK_BOARD_VER  (0x000000C0)
#define IWM_CSR_HW_IF_CONFIG_REG_BIT_MAC_SI     (0x00000100)
#define IWM_CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI   (0x00000200)
#define IWM_CSR_HW_IF_CONFIG_REG_MSK_PHY_TYPE   (0x00000C00)
#define IWM_CSR_HW_IF_CONFIG_REG_MSK_PHY_DASH   (0x00003000)
#define IWM_CSR_HW_IF_CONFIG_REG_MSK_PHY_STEP   (0x0000C000)

#define IWM_CSR_HW_IF_CONFIG_REG_POS_MAC_DASH   (0)
#define IWM_CSR_HW_IF_CONFIG_REG_POS_MAC_STEP   (2)
#define IWM_CSR_HW_IF_CONFIG_REG_POS_BOARD_VER  (6)
#define IWM_CSR_HW_IF_CONFIG_REG_POS_PHY_TYPE   (10)
#define IWM_CSR_HW_IF_CONFIG_REG_POS_PHY_DASH   (12)
#define IWM_CSR_HW_IF_CONFIG_REG_POS_PHY_STEP   (14)

#define IWM_CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A       (0x00080000)
#define IWM_CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM     (0x00200000)
#define IWM_CSR_HW_IF_CONFIG_REG_BIT_NIC_READY  (0x00400000) /* PCI_OWN_SEM */
#define IWM_CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE (0x02000000) /* ME_OWN */
#define IWM_CSR_HW_IF_CONFIG_REG_PREPARE        (0x08000000) /* WAKE_ME */
#define IWM_CSR_HW_IF_CONFIG_REG_ENABLE_PME     (0x10000000)
#define IWM_CSR_HW_IF_CONFIG_REG_PERSIST_MODE   (0x40000000) /* PERSISTENCE */

#define IWM_CSR_INT_PERIODIC_DIS                (0x00) /* disable periodic int*/
#define IWM_CSR_INT_PERIODIC_ENA                (0xFF) /* 255*32 usec ~ 8 msec*/

/* interrupt flags in INTA, set by uCode or hardware (e.g. dma),
 * acknowledged (reset) by host writing "1" to flagged bits. */
#define IWM_CSR_INT_BIT_FH_RX   (1 << 31) /* Rx DMA, cmd responses, FH_INT[17:16] */
#define IWM_CSR_INT_BIT_HW_ERR  (1 << 29) /* DMA hardware error FH_INT[31] */
#define IWM_CSR_INT_BIT_RX_PERIODIC     (1 << 28) /* Rx periodic */
#define IWM_CSR_INT_BIT_FH_TX   (1 << 27) /* Tx DMA FH_INT[1:0] */
#define IWM_CSR_INT_BIT_SCD     (1 << 26) /* TXQ pointer advanced */
#define IWM_CSR_INT_BIT_SW_ERR  (1 << 25) /* uCode error */
#define IWM_CSR_INT_BIT_RF_KILL (1 << 7)  /* HW RFKILL switch GP_CNTRL[27] toggled */
#define IWM_CSR_INT_BIT_CT_KILL (1 << 6)  /* Critical temp (chip too hot) rfkill */
#define IWM_CSR_INT_BIT_SW_RX   (1 << 3)  /* Rx, command responses */
#define IWM_CSR_INT_BIT_WAKEUP  (1 << 1)  /* NIC controller waking up (pwr mgmt) */
#define IWM_CSR_INT_BIT_ALIVE   (1 << 0)  /* uCode interrupts once it initializes */

#define IWM_CSR_INI_SET_MASK    (IWM_CSR_INT_BIT_FH_RX   | \
                                 IWM_CSR_INT_BIT_HW_ERR  | \
                                 IWM_CSR_INT_BIT_FH_TX   | \
                                 IWM_CSR_INT_BIT_SW_ERR  | \
                                 IWM_CSR_INT_BIT_RF_KILL | \
                                 IWM_CSR_INT_BIT_SW_RX   | \
                                 IWM_CSR_INT_BIT_WAKEUP  | \
                                 IWM_CSR_INT_BIT_ALIVE   | \
                                 IWM_CSR_INT_BIT_RX_PERIODIC)

/* interrupt flags in FH (flow handler) (PCI busmaster DMA) */
#define IWM_CSR_FH_INT_BIT_ERR       (1 << 31) /* Error */
#define IWM_CSR_FH_INT_BIT_HI_PRIOR  (1 << 30) /* High priority Rx, bypass coalescing */
#define IWM_CSR_FH_INT_BIT_RX_CHNL1  (1 << 17) /* Rx channel 1 */
#define IWM_CSR_FH_INT_BIT_RX_CHNL0  (1 << 16) /* Rx channel 0 */
#define IWM_CSR_FH_INT_BIT_TX_CHNL1  (1 << 1)  /* Tx channel 1 */
#define IWM_CSR_FH_INT_BIT_TX_CHNL0  (1 << 0)  /* Tx channel 0 */

#define IWM_CSR_FH_INT_RX_MASK  (IWM_CSR_FH_INT_BIT_HI_PRIOR | \
                                IWM_CSR_FH_INT_BIT_RX_CHNL1 | \
                                IWM_CSR_FH_INT_BIT_RX_CHNL0)

#define IWM_CSR_FH_INT_TX_MASK  (IWM_CSR_FH_INT_BIT_TX_CHNL1 | \
                                IWM_CSR_FH_INT_BIT_TX_CHNL0)

/* GPIO */
#define IWM_CSR_GPIO_IN_BIT_AUX_POWER                   (0x00000200)
#define IWM_CSR_GPIO_IN_VAL_VAUX_PWR_SRC                (0x00000000)
#define IWM_CSR_GPIO_IN_VAL_VMAIN_PWR_SRC               (0x00000200)

/* RESET */
#define IWM_CSR_RESET_REG_FLAG_NEVO_RESET                (0x00000001)
#define IWM_CSR_RESET_REG_FLAG_FORCE_NMI                 (0x00000002)
#define IWM_CSR_RESET_REG_FLAG_SW_RESET                  (0x00000080)
#define IWM_CSR_RESET_REG_FLAG_MASTER_DISABLED           (0x00000100)
#define IWM_CSR_RESET_REG_FLAG_STOP_MASTER               (0x00000200)
#define IWM_CSR_RESET_LINK_PWR_MGMT_DISABLED             (0x80000000)

/*
 * GP (general purpose) CONTROL REGISTER
 * Bit fields:
 *    27:  HW_RF_KILL_SW
 *         Indicates state of (platform's) hardware RF-Kill switch
 * 26-24:  POWER_SAVE_TYPE
 *         Indicates current power-saving mode:
 *         000 -- No power saving
 *         001 -- MAC power-down
 *         010 -- PHY (radio) power-down
 *         011 -- Error
 *   9-6:  SYS_CONFIG
 *         Indicates current system configuration, reflecting pins on chip
 *         as forced high/low by device circuit board.
 *     4:  GOING_TO_SLEEP
 *         Indicates MAC is entering a power-saving sleep power-down.
 *         Not a good time to access device-internal resources.
 *     3:  MAC_ACCESS_REQ
 *         Host sets this to request and maintain MAC wakeup, to allow host
 *         access to device-internal resources.  Host must wait for
 *         MAC_CLOCK_READY (and !GOING_TO_SLEEP) before accessing non-CSR
 *         device registers.
 *     2:  INIT_DONE
 *         Host sets this to put device into fully operational D0 power mode.
 *         Host resets this after SW_RESET to put device into low power mode.
 *     0:  MAC_CLOCK_READY
 *         Indicates MAC (ucode processor, etc.) is powered up and can run.
 *         Internal resources are accessible.
 *         NOTE:  This does not indicate that the processor is actually running.
 *         NOTE:  This does not indicate that device has completed
 *                init or post-power-down restore of internal SRAM memory.
 *                Use IWM_CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP as indication that
 *                SRAM is restored and uCode is in normal operation mode.
 *                Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and
 *                do not need to save/restore it.
 *         NOTE:  After device reset, this bit remains "0" until host sets
 *                INIT_DONE
 */
#define IWM_CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY        (0x00000001)
#define IWM_CSR_GP_CNTRL_REG_FLAG_INIT_DONE              (0x00000004)
#define IWM_CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ         (0x00000008)
#define IWM_CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP         (0x00000010)

#define IWM_CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN           (0x00000001)

#define IWM_CSR_GP_CNTRL_REG_MSK_POWER_SAVE_TYPE         (0x07000000)
#define IWM_CSR_GP_CNTRL_REG_FLAG_MAC_POWER_SAVE         (0x04000000)
#define IWM_CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW          (0x08000000)


/* HW REV */
#define IWM_CSR_HW_REV_DASH(_val)          (((_val) & 0x0000003) >> 0)
#define IWM_CSR_HW_REV_STEP(_val)          (((_val) & 0x000000C) >> 2)

/**
 *  hw_rev values
 */
enum {
        IWM_SILICON_A_STEP = 0,
        IWM_SILICON_B_STEP,
        IWM_SILICON_C_STEP,
};


#define IWM_CSR_HW_REV_TYPE_MSK         (0x000FFF0)
#define IWM_CSR_HW_REV_TYPE_5300        (0x0000020)
#define IWM_CSR_HW_REV_TYPE_5350        (0x0000030)
#define IWM_CSR_HW_REV_TYPE_5100        (0x0000050)
#define IWM_CSR_HW_REV_TYPE_5150        (0x0000040)
#define IWM_CSR_HW_REV_TYPE_1000        (0x0000060)
#define IWM_CSR_HW_REV_TYPE_6x00        (0x0000070)
#define IWM_CSR_HW_REV_TYPE_6x50        (0x0000080)
#define IWM_CSR_HW_REV_TYPE_6150        (0x0000084)
#define IWM_CSR_HW_REV_TYPE_6x05        (0x00000B0)
#define IWM_CSR_HW_REV_TYPE_6x30        IWM_CSR_HW_REV_TYPE_6x05
#define IWM_CSR_HW_REV_TYPE_6x35        IWM_CSR_HW_REV_TYPE_6x05
#define IWM_CSR_HW_REV_TYPE_2x30        (0x00000C0)
#define IWM_CSR_HW_REV_TYPE_2x00        (0x0000100)
#define IWM_CSR_HW_REV_TYPE_105         (0x0000110)
#define IWM_CSR_HW_REV_TYPE_135         (0x0000120)
#define IWM_CSR_HW_REV_TYPE_7265D       (0x0000210)
#define IWM_CSR_HW_REV_TYPE_NONE        (0x00001F0)

/* EEPROM REG */
#define IWM_CSR_EEPROM_REG_READ_VALID_MSK       (0x00000001)
#define IWM_CSR_EEPROM_REG_BIT_CMD              (0x00000002)
#define IWM_CSR_EEPROM_REG_MSK_ADDR             (0x0000FFFC)
#define IWM_CSR_EEPROM_REG_MSK_DATA             (0xFFFF0000)

/* EEPROM GP */
#define IWM_CSR_EEPROM_GP_VALID_MSK             (0x00000007) /* signature */
#define IWM_CSR_EEPROM_GP_IF_OWNER_MSK  (0x00000180)
#define IWM_CSR_EEPROM_GP_BAD_SIGNATURE_BOTH_EEP_AND_OTP        (0x00000000)
#define IWM_CSR_EEPROM_GP_BAD_SIG_EEP_GOOD_SIG_OTP              (0x00000001)
#define IWM_CSR_EEPROM_GP_GOOD_SIG_EEP_LESS_THAN_4K             (0x00000002)
#define IWM_CSR_EEPROM_GP_GOOD_SIG_EEP_MORE_THAN_4K             (0x00000004)

/* One-time-programmable memory general purpose reg */
#define IWM_CSR_OTP_GP_REG_DEVICE_SELECT  (0x00010000) /* 0 - EEPROM, 1 - OTP */
#define IWM_CSR_OTP_GP_REG_OTP_ACCESS_MODE  (0x00020000) /* 0 - absolute, 1 - relative */
#define IWM_CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK    (0x00100000) /* bit 20 */
#define IWM_CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK  (0x00200000) /* bit 21 */

/* GP REG */
#define IWM_CSR_GP_REG_POWER_SAVE_STATUS_MSK    (0x03000000) /* bit 24/25 */
#define IWM_CSR_GP_REG_NO_POWER_SAVE            (0x00000000)
#define IWM_CSR_GP_REG_MAC_POWER_SAVE           (0x01000000)
#define IWM_CSR_GP_REG_PHY_POWER_SAVE           (0x02000000)
#define IWM_CSR_GP_REG_POWER_SAVE_ERROR         (0x03000000)


/* CSR GIO */
#define IWM_CSR_GIO_REG_VAL_L0S_ENABLED (0x00000002)

/*
 * UCODE-DRIVER GP (general purpose) mailbox register 1
 * Host driver and uCode write and/or read this register to communicate with
 * each other.
 * Bit fields:
 *     4:  UCODE_DISABLE
 *         Host sets this to request permanent halt of uCode, same as
 *         sending CARD_STATE command with "halt" bit set.
 *     3:  CT_KILL_EXIT
 *         Host sets this to request exit from CT_KILL state, i.e. host thinks
 *         device temperature is low enough to continue normal operation.
 *     2:  CMD_BLOCKED
 *         Host sets this during RF KILL power-down sequence (HW, SW, CT KILL)
 *         to release uCode to clear all Tx and command queues, enter
 *         unassociated mode, and power down.
 *         NOTE:  Some devices also use HBUS_TARG_MBX_C register for this bit.
 *     1:  SW_BIT_RFKILL
 *         Host sets this when issuing CARD_STATE command to request
 *         device sleep.
 *     0:  MAC_SLEEP
 *         uCode sets this when preparing a power-saving power-down.
 *         uCode resets this when power-up is complete and SRAM is sane.
 *         NOTE:  device saves internal SRAM data to host when powering down,
 *                and must restore this data after powering back up.
 *                MAC_SLEEP is the best indication that restore is complete.
 *                Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and
 *                do not need to save/restore it.
 */
#define IWM_CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP             (0x00000001)
#define IWM_CSR_UCODE_SW_BIT_RFKILL                     (0x00000002)
#define IWM_CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED           (0x00000004)
#define IWM_CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT      (0x00000008)
#define IWM_CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE       (0x00000020)

/* GP Driver */
#define IWM_CSR_GP_DRIVER_REG_BIT_RADIO_SKU_MSK             (0x00000003)
#define IWM_CSR_GP_DRIVER_REG_BIT_RADIO_SKU_3x3_HYB         (0x00000000)
#define IWM_CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_HYB         (0x00000001)
#define IWM_CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA         (0x00000002)
#define IWM_CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6            (0x00000004)
#define IWM_CSR_GP_DRIVER_REG_BIT_6050_1x2                  (0x00000008)

#define IWM_CSR_GP_DRIVER_REG_BIT_RADIO_IQ_INVER            (0x00000080)

/* GIO Chicken Bits (PCI Express bus link power management) */
#define IWM_CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX  (0x00800000)
#define IWM_CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER  (0x20000000)

/* LED */
#define IWM_CSR_LED_BSM_CTRL_MSK (0xFFFFFFDF)
#define IWM_CSR_LED_REG_TURN_ON (0x60)
#define IWM_CSR_LED_REG_TURN_OFF (0x20)

/* ANA_PLL */
#define IWM_CSR50_ANA_PLL_CFG_VAL        (0x00880300)

/* HPET MEM debug */
#define IWM_CSR_DBG_HPET_MEM_REG_VAL    (0xFFFF0000)

/* DRAM INT TABLE */
#define IWM_CSR_DRAM_INT_TBL_ENABLE             (1 << 31)
#define IWM_CSR_DRAM_INIT_TBL_WRITE_POINTER     (1 << 28)
#define IWM_CSR_DRAM_INIT_TBL_WRAP_CHECK        (1 << 27)

/* SECURE boot registers */
#define IWM_CSR_SECURE_BOOT_CONFIG_ADDR (0x100)
enum iwm_secure_boot_config_reg {
        IWM_CSR_SECURE_BOOT_CONFIG_INSPECTOR_BURNED_IN_OTP      = 0x00000001,
        IWM_CSR_SECURE_BOOT_CONFIG_INSPECTOR_NOT_REQ    = 0x00000002,
};

#define IWM_CSR_SECURE_BOOT_CPU1_STATUS_ADDR    (0x100)
#define IWM_CSR_SECURE_BOOT_CPU2_STATUS_ADDR    (0x100)
enum iwm_secure_boot_status_reg {
        IWM_CSR_SECURE_BOOT_CPU_STATUS_VERF_STATUS              = 0x00000003,
        IWM_CSR_SECURE_BOOT_CPU_STATUS_VERF_COMPLETED   = 0x00000002,
        IWM_CSR_SECURE_BOOT_CPU_STATUS_VERF_SUCCESS             = 0x00000004,
        IWM_CSR_SECURE_BOOT_CPU_STATUS_VERF_FAIL                = 0x00000008,
        IWM_CSR_SECURE_BOOT_CPU_STATUS_SIGN_VERF_FAIL   = 0x00000010,
};

#define IWM_FH_UCODE_LOAD_STATUS        0x1af0
#define IWM_FH_MEM_TB_MAX_LENGTH        0x20000

#define IWM_LMPM_SECURE_UCODE_LOAD_CPU1_HDR_ADDR        0x1e78
#define IWM_LMPM_SECURE_UCODE_LOAD_CPU2_HDR_ADDR        0x1e7c

#define IWM_LMPM_SECURE_CPU1_HDR_MEM_SPACE              0x420000
#define IWM_LMPM_SECURE_CPU2_HDR_MEM_SPACE              0x420400

#define IWM_CSR_SECURE_TIME_OUT (100)

/* extended range in FW SRAM */
#define IWM_FW_MEM_EXTENDED_START       0x40000
#define IWM_FW_MEM_EXTENDED_END         0x57FFF

/* FW chicken bits */
#define IWM_LMPM_CHICK                          0xa01ff8
#define IWM_LMPM_CHICK_EXTENDED_ADDR_SPACE      0x01

#define IWM_FH_TCSR_0_REG0 (0x1D00)

/*
 * HBUS (Host-side Bus)
 *
 * HBUS registers are mapped directly into PCI bus space, but are used
 * to indirectly access device's internal memory or registers that
 * may be powered-down.
 *
 * Use iwl_write_direct32()/iwl_read_direct32() family for these registers;
 * host must "grab nic access" via CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ
 * to make sure the MAC (uCode processor, etc.) is powered up for accessing
 * internal resources.
 *
 * Do not use iwl_write32()/iwl_read32() family to access these registers;
 * these provide only simple PCI bus access, without waking up the MAC.
 */
#define IWM_HBUS_BASE   (0x400)

/*
 * Registers for accessing device's internal SRAM memory (e.g. SCD SRAM
 * structures, error log, event log, verifying uCode load).
 * First write to address register, then read from or write to data register
 * to complete the job.  Once the address register is set up, accesses to
 * data registers auto-increment the address by one dword.
 * Bit usage for address registers (read or write):
 *  0-31:  memory address within device
 */
#define IWM_HBUS_TARG_MEM_RADDR     (IWM_HBUS_BASE+0x00c)
#define IWM_HBUS_TARG_MEM_WADDR     (IWM_HBUS_BASE+0x010)
#define IWM_HBUS_TARG_MEM_WDAT      (IWM_HBUS_BASE+0x018)
#define IWM_HBUS_TARG_MEM_RDAT      (IWM_HBUS_BASE+0x01c)

/* Mailbox C, used as workaround alternative to CSR_UCODE_DRV_GP1 mailbox */
#define IWM_HBUS_TARG_MBX_C         (IWM_HBUS_BASE+0x030)
#define IWM_HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED         (0x00000004)

/*
 * Registers for accessing device's internal peripheral registers
 * (e.g. SCD, BSM, etc.).  First write to address register,
 * then read from or write to data register to complete the job.
 * Bit usage for address registers (read or write):
 *  0-15:  register address (offset) within device
 * 24-25:  (# bytes - 1) to read or write (e.g. 3 for dword)
 */
#define IWM_HBUS_TARG_PRPH_WADDR    (IWM_HBUS_BASE+0x044)
#define IWM_HBUS_TARG_PRPH_RADDR    (IWM_HBUS_BASE+0x048)
#define IWM_HBUS_TARG_PRPH_WDAT     (IWM_HBUS_BASE+0x04c)
#define IWM_HBUS_TARG_PRPH_RDAT     (IWM_HBUS_BASE+0x050)

/* enable the ID buf for read */
#define IWM_WFPM_PS_CTL_CLR                     0xa0300c
#define IWM_WFMP_MAC_ADDR_0                     0xa03080
#define IWM_WFMP_MAC_ADDR_1                     0xa03084
#define IWM_LMPM_PMG_EN                         0xa01cec
#define IWM_RADIO_REG_SYS_MANUAL_DFT_0          0xad4078
#define IWM_RFIC_REG_RD                         0xad0470
#define IWM_WFPM_CTRL_REG                       0xa03030
#define IWM_WFPM_AUX_CTL_AUX_IF_MAC_OWNER_MSK   0x08000000
#define IWM_ENABLE_WFPM                         0x80000000

#define IWM_AUX_MISC_REG                        0xa200b0
#define IWM_HW_STEP_LOCATION_BITS               24

#define IWM_AUX_MISC_MASTER1_EN                 0xa20818
#define IWM_AUX_MISC_MASTER1_EN_SBE_MSK         0x1
#define IWM_AUX_MISC_MASTER1_SMPHR_STATUS       0xa20800
#define IWM_RSA_ENABLE                          0xa24b08
#define IWM_PREG_AUX_BUS_WPROT_0                0xa04cc0
#define IWM_SB_CFG_OVERRIDE_ADDR                0xa26c78
#define IWM_SB_CFG_OVERRIDE_ENABLE              0x8000
#define IWM_SB_CFG_BASE_OVERRIDE                0xa20000
#define IWM_SB_MODIFY_CFG_FLAG                  0xa03088
#define IWM_SB_CPU_1_STATUS                     0xa01e30
#define IWM_SB_CPU_2_STATUS                     0Xa01e34

/* Used to enable DBGM */
#define IWM_HBUS_TARG_TEST_REG  (IWM_HBUS_BASE+0x05c)

/*
 * Per-Tx-queue write pointer (index, really!)
 * Indicates index to next TFD that driver will fill (1 past latest filled).
 * Bit usage:
 *  0-7:  queue write index
 * 11-8:  queue selector
 */
#define IWM_HBUS_TARG_WRPTR         (IWM_HBUS_BASE+0x060)

/**********************************************************
 * CSR values
 **********************************************************/
 /*
 * host interrupt timeout value
 * used with setting interrupt coalescing timer
 * the CSR_INT_COALESCING is an 8 bit register in 32-usec unit
 *
 * default interrupt coalescing timer is 64 x 32 = 2048 usecs
 */
#define IWM_HOST_INT_TIMEOUT_MAX        (0xFF)
#define IWM_HOST_INT_TIMEOUT_DEF        (0x40)
#define IWM_HOST_INT_TIMEOUT_MIN        (0x0)
#define IWM_HOST_INT_OPER_MODE          (1 << 31)

/*****************************************************************************
 *                        7000/3000 series SHR DTS addresses                 *
 *****************************************************************************/

/* Diode Results Register Structure: */
enum iwm_dtd_diode_reg {
        IWM_DTS_DIODE_REG_DIG_VAL               = 0x000000FF, /* bits [7:0] */
        IWM_DTS_DIODE_REG_VREF_LOW              = 0x0000FF00, /* bits [15:8] */
        IWM_DTS_DIODE_REG_VREF_HIGH             = 0x00FF0000, /* bits [23:16] */
        IWM_DTS_DIODE_REG_VREF_ID               = 0x03000000, /* bits [25:24] */
        IWM_DTS_DIODE_REG_PASS_ONCE             = 0x80000000, /* bits [31:31] */
        IWM_DTS_DIODE_REG_FLAGS_MSK             = 0xFF000000, /* bits [31:24] */
/* Those are the masks INSIDE the flags bit-field: */
        IWM_DTS_DIODE_REG_FLAGS_VREFS_ID_POS    = 0,
        IWM_DTS_DIODE_REG_FLAGS_VREFS_ID        = 0x00000003, /* bits [1:0] */
        IWM_DTS_DIODE_REG_FLAGS_PASS_ONCE_POS   = 7,
        IWM_DTS_DIODE_REG_FLAGS_PASS_ONCE       = 0x00000080, /* bits [7:7] */
};

/*
 * END iwl-csr.h
 */

/*
 * BEGIN iwl-fw.h
 */

/**
 * enum iwm_ucode_tlv_flag - ucode API flags
 * @IWM_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously
 *      was a separate TLV but moved here to save space.
 * @IWM_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behaviour on hidden SSID,
 *      treats good CRC threshold as a boolean
 * @IWM_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w).
 * @IWM_UCODE_TLV_FLAGS_UAPSD: This uCode image supports uAPSD
 * @IWM_UCODE_TLV_FLAGS_SHORT_BL: 16 entries of black list instead of 64 in scan
 *      offload profile config command.
 * @IWM_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six
 *      (rather than two) IPv6 addresses
 * @IWM_UCODE_TLV_FLAGS_NO_BASIC_SSID: not sending a probe with the SSID element
 *      from the probe request template.
 * @IWM_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL: new NS offload (small version)
 * @IWM_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE: new NS offload (large version)
 * @IWM_UCODE_TLV_FLAGS_UAPSD_SUPPORT: General support for uAPSD
 * @IWM_UCODE_TLV_FLAGS_EBS_SUPPORT: this uCode image supports EBS.
 * @IWM_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save
 * @IWM_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering.
 */
enum iwm_ucode_tlv_flag {
        IWM_UCODE_TLV_FLAGS_PAN                 = (1 << 0),
        IWM_UCODE_TLV_FLAGS_NEWSCAN             = (1 << 1),
        IWM_UCODE_TLV_FLAGS_MFP                 = (1 << 2),
        IWM_UCODE_TLV_FLAGS_SHORT_BL            = (1 << 7),
        IWM_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS     = (1 << 10),
        IWM_UCODE_TLV_FLAGS_NO_BASIC_SSID       = (1 << 12),
        IWM_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL    = (1 << 15),
        IWM_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE    = (1 << 16),
        IWM_UCODE_TLV_FLAGS_UAPSD_SUPPORT       = (1 << 24),
        IWM_UCODE_TLV_FLAGS_EBS_SUPPORT         = (1 << 25),
        IWM_UCODE_TLV_FLAGS_P2P_PS_UAPSD        = (1 << 26),
        IWM_UCODE_TLV_FLAGS_BCAST_FILTERING     = (1 << 29),
};

#define IWM_UCODE_TLV_FLAG_BITS \
        "\020\1PAN\2NEWSCAN\3MFP\4P2P\5DW_BC_TABLE\6NEWBT_COEX\7PM_CMD\10SHORT_BL\11RX_ENERG \
Y\12TIME_EVENT_V2\13D3_6_IPV6\14BF_UPDATED\15NO_BASIC_SSID\17D3_CONTINUITY\20NEW_NSOFF \
L_S\21NEW_NSOFFL_L\22SCHED_SCAN\24STA_KEY_CMD\25DEVICE_PS_CMD\26P2P_PS\27P2P_PS_DCM\30 \
P2P_PS_SCM\31UAPSD_SUPPORT\32EBS\33P2P_PS_UAPSD\36BCAST_FILTERING\37GO_UAPSD\40LTE_COEX"

/**
 * enum iwm_ucode_tlv_api - ucode api
 * @IWM_UCODE_TLV_API_FRAGMENTED_SCAN: This ucode supports active dwell time
 *      longer than the passive one, which is essential for fragmented scan.
 * @IWM_UCODE_TLV_API_WIFI_MCC_UPDATE: ucode supports MCC updates with source.
 * @IWM_UCODE_TLV_API_LQ_SS_PARAMS: Configure STBC/BFER via LQ CMD ss_params
 *
 * @IWM_NUM_UCODE_TLV_API: number of bits used
 */
enum iwm_ucode_tlv_api {
        IWM_UCODE_TLV_API_FRAGMENTED_SCAN       = 8,
        IWM_UCODE_TLV_API_WIFI_MCC_UPDATE       = 9,
        IWM_UCODE_TLV_API_LQ_SS_PARAMS          = 18,

        IWM_NUM_UCODE_TLV_API = 32
};

#define IWM_UCODE_TLV_API_BITS \
        "\020\10FRAGMENTED_SCAN\11WIFI_MCC_UPDATE\16WIDE_CMD_HDR\22LQ_SS_PARAMS\30EXT_SCAN_PRIO\33TX_POWER_CHAIN"

/**
 * enum iwm_ucode_tlv_capa - ucode capabilities
 * @IWM_UCODE_TLV_CAPA_D0I3_SUPPORT: supports D0i3
 * @IWM_UCODE_TLV_CAPA_LAR_SUPPORT: supports Location Aware Regulatory
 * @IWM_UCODE_TLV_CAPA_UMAC_SCAN: supports UMAC scan.
 * @IWM_UCODE_TLV_CAPA_BEAMFORMER: supports Beamformer
 * @IWM_UCODE_TLV_CAPA_TOF_SUPPORT: supports Time of Flight (802.11mc FTM)
 * @IWM_UCODE_TLV_CAPA_TDLS_SUPPORT: support basic TDLS functionality
 * @IWM_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT: supports insertion of current
 *      tx power value into TPC Report action frame and Link Measurement Report
 *      action frame
 * @IWM_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT: supports updating current
 *      channel in DS parameter set element in probe requests.
 * @IWM_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT: supports adding TPC Report IE in
 *      probe requests.
 * @IWM_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT: supports Quiet Period requests
 * @IWM_UCODE_TLV_CAPA_DQA_SUPPORT: supports dynamic queue allocation (DQA),
 *      which also implies support for the scheduler configuration command
 * @IWM_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH: supports TDLS channel switching
 * @IWM_UCODE_TLV_CAPA_CNSLDTD_D3_D0_IMG: Consolidated D3-D0 image
 * @IWM_UCODE_TLV_CAPA_HOTSPOT_SUPPORT: supports Hot Spot Command
 * @IWM_UCODE_TLV_CAPA_DC2DC_SUPPORT: supports DC2DC Command
 * @IWM_UCODE_TLV_CAPA_2G_COEX_SUPPORT: supports 2G coex Command
 * @IWM_UCODE_TLV_CAPA_CSUM_SUPPORT: supports TCP Checksum Offload
 * @IWM_UCODE_TLV_CAPA_RADIO_BEACON_STATS: support radio and beacon statistics
 * @IWM_UCODE_TLV_CAPA_P2P_STANDALONE_UAPSD: support p2p standalone U-APSD
 * @IWM_UCODE_TLV_CAPA_BT_COEX_PLCR: enabled BT Coex packet level co-running
 * @IWM_UCODE_TLV_CAPA_LAR_MULTI_MCC: ucode supports LAR updates with different
 *      sources for the MCC. This TLV bit is a future replacement to
 *      IWM_UCODE_TLV_API_WIFI_MCC_UPDATE. When either is set, multi-source LAR
 *      is supported.
 * @IWM_UCODE_TLV_CAPA_BT_COEX_RRC: supports BT Coex RRC
 * @IWM_UCODE_TLV_CAPA_GSCAN_SUPPORT: supports gscan
 * @IWM_UCODE_TLV_CAPA_NAN_SUPPORT: supports NAN
 * @IWM_UCODE_TLV_CAPA_UMAC_UPLOAD: supports upload mode in umac (1=supported,
 *      0=no support)
 * @IWM_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE: extended DTS measurement
 * @IWM_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS: supports short PM timeouts
 * @IWM_UCODE_TLV_CAPA_BT_MPLUT_SUPPORT: supports bt-coex Multi-priority LUT
 * @IWM_UCODE_TLV_CAPA_BEACON_ANT_SELECTION: firmware will decide on what
 *      antenna the beacon should be transmitted
 * @IWM_UCODE_TLV_CAPA_BEACON_STORING: firmware will store the latest beacon
 *      from AP and will send it upon d0i3 exit.
 * @IWM_UCODE_TLV_CAPA_LAR_SUPPORT_V2: support LAR API V2
 * @IWM_UCODE_TLV_CAPA_CT_KILL_BY_FW: firmware responsible for CT-kill
 * @IWM_UCODE_TLV_CAPA_TEMP_THS_REPORT_SUPPORT: supports temperature
 *      thresholds reporting
 * @IWM_UCODE_TLV_CAPA_CTDP_SUPPORT: supports cTDP command
 * @IWM_UCODE_TLV_CAPA_USNIFFER_UNIFIED: supports usniffer enabled in
 *      regular image.
 * @IWM_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG: support getting more shared
 *      memory addresses from the firmware.
 * @IWM_UCODE_TLV_CAPA_LQM_SUPPORT: supports Link Quality Measurement
 * @IWM_UCODE_TLV_CAPA_TX_POWER_ACK: reduced TX power API has larger
 *      command size (command version 4) that supports toggling ACK TX
 *      power reduction.
 *
 * @IWM_NUM_UCODE_TLV_CAPA: number of bits used
 */
enum iwm_ucode_tlv_capa {
        IWM_UCODE_TLV_CAPA_D0I3_SUPPORT                 = 0,
        IWM_UCODE_TLV_CAPA_LAR_SUPPORT                  = 1,
        IWM_UCODE_TLV_CAPA_UMAC_SCAN                    = 2,
        IWM_UCODE_TLV_CAPA_BEAMFORMER                   = 3,
        IWM_UCODE_TLV_CAPA_TOF_SUPPORT                  = 5,
        IWM_UCODE_TLV_CAPA_TDLS_SUPPORT                 = 6,
        IWM_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT    = 8,
        IWM_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT      = 9,
        IWM_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT       = 10,
        IWM_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT         = 11,
        IWM_UCODE_TLV_CAPA_DQA_SUPPORT                  = 12,
        IWM_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH          = 13,
        IWM_UCODE_TLV_CAPA_CNSLDTD_D3_D0_IMG            = 17,
        IWM_UCODE_TLV_CAPA_HOTSPOT_SUPPORT              = 18,
        IWM_UCODE_TLV_CAPA_DC2DC_CONFIG_SUPPORT         = 19,
        IWM_UCODE_TLV_CAPA_2G_COEX_SUPPORT              = 20,
        IWM_UCODE_TLV_CAPA_CSUM_SUPPORT                 = 21,
        IWM_UCODE_TLV_CAPA_RADIO_BEACON_STATS           = 22,
        IWM_UCODE_TLV_CAPA_P2P_STANDALONE_UAPSD         = 26,
        IWM_UCODE_TLV_CAPA_BT_COEX_PLCR                 = 28,
        IWM_UCODE_TLV_CAPA_LAR_MULTI_MCC                = 29,
        IWM_UCODE_TLV_CAPA_BT_COEX_RRC                  = 30,
        IWM_UCODE_TLV_CAPA_GSCAN_SUPPORT                = 31,
        IWM_UCODE_TLV_CAPA_NAN_SUPPORT                  = 34,
        IWM_UCODE_TLV_CAPA_UMAC_UPLOAD                  = 35,
        IWM_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE         = 64,
        IWM_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS            = 65,
        IWM_UCODE_TLV_CAPA_BT_MPLUT_SUPPORT             = 67,
        IWM_UCODE_TLV_CAPA_MULTI_QUEUE_RX_SUPPORT       = 68,
        IWM_UCODE_TLV_CAPA_BEACON_ANT_SELECTION         = 71,
        IWM_UCODE_TLV_CAPA_BEACON_STORING               = 72,
        IWM_UCODE_TLV_CAPA_LAR_SUPPORT_V2               = 73,
        IWM_UCODE_TLV_CAPA_CT_KILL_BY_FW                = 74,
        IWM_UCODE_TLV_CAPA_TEMP_THS_REPORT_SUPPORT      = 75,
        IWM_UCODE_TLV_CAPA_CTDP_SUPPORT                 = 76,
        IWM_UCODE_TLV_CAPA_USNIFFER_UNIFIED             = 77,
        IWM_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG        = 80,
        IWM_UCODE_TLV_CAPA_LQM_SUPPORT                  = 81,
        IWM_UCODE_TLV_CAPA_TX_POWER_ACK                 = 84,

        IWM_NUM_UCODE_TLV_CAPA = 128
};

/* The default calibrate table size if not specified by firmware file */
#define IWM_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE     18
#define IWM_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE         19
#define IWM_MAX_PHY_CALIBRATE_TBL_SIZE                  253

/* The default max probe length if not specified by the firmware file */
#define IWM_DEFAULT_MAX_PROBE_LENGTH    200

/*
 * enumeration of ucode section.
 * This enumeration is used directly for older firmware (before 16.0).
 * For new firmware, there can be up to 4 sections (see below) but the
 * first one packaged into the firmware file is the DATA section and
 * some debugging code accesses that.
 */
enum iwm_ucode_sec {
        IWM_UCODE_SECTION_DATA,
        IWM_UCODE_SECTION_INST,
};
/*
 * For 16.0 uCode and above, there is no differentiation between sections,
 * just an offset to the HW address.
 */
#define IWM_CPU1_CPU2_SEPARATOR_SECTION         0xFFFFCCCC
#define IWM_PAGING_SEPARATOR_SECTION            0xAAAABBBB

/* uCode version contains 4 values: Major/Minor/API/Serial */
#define IWM_UCODE_MAJOR(ver)    (((ver) & 0xFF000000) >> 24)
#define IWM_UCODE_MINOR(ver)    (((ver) & 0x00FF0000) >> 16)
#define IWM_UCODE_API(ver)      (((ver) & 0x0000FF00) >> 8)
#define IWM_UCODE_SERIAL(ver)   ((ver) & 0x000000FF)

/*
 * Calibration control struct.
 * Sent as part of the phy configuration command.
 * @flow_trigger: bitmap for which calibrations to perform according to
 *              flow triggers.
 * @event_trigger: bitmap for which calibrations to perform according to
 *              event triggers.
 */
struct iwm_tlv_calib_ctrl {
        uint32_t flow_trigger;
        uint32_t event_trigger;
} __packed;

enum iwm_fw_phy_cfg {
        IWM_FW_PHY_CFG_RADIO_TYPE_POS = 0,
        IWM_FW_PHY_CFG_RADIO_TYPE = 0x3 << IWM_FW_PHY_CFG_RADIO_TYPE_POS,
        IWM_FW_PHY_CFG_RADIO_STEP_POS = 2,
        IWM_FW_PHY_CFG_RADIO_STEP = 0x3 << IWM_FW_PHY_CFG_RADIO_STEP_POS,
        IWM_FW_PHY_CFG_RADIO_DASH_POS = 4,
        IWM_FW_PHY_CFG_RADIO_DASH = 0x3 << IWM_FW_PHY_CFG_RADIO_DASH_POS,
        IWM_FW_PHY_CFG_TX_CHAIN_POS = 16,
        IWM_FW_PHY_CFG_TX_CHAIN = 0xf << IWM_FW_PHY_CFG_TX_CHAIN_POS,
        IWM_FW_PHY_CFG_RX_CHAIN_POS = 20,
        IWM_FW_PHY_CFG_RX_CHAIN = 0xf << IWM_FW_PHY_CFG_RX_CHAIN_POS,
};

#define IWM_UCODE_MAX_CS                1

/**
 * struct iwm_fw_cipher_scheme - a cipher scheme supported by FW.
 * @cipher: a cipher suite selector
 * @flags: cipher scheme flags (currently reserved for a future use)
 * @hdr_len: a size of MPDU security header
 * @pn_len: a size of PN
 * @pn_off: an offset of pn from the beginning of the security header
 * @key_idx_off: an offset of key index byte in the security header
 * @key_idx_mask: a bit mask of key_idx bits
 * @key_idx_shift: bit shift needed to get key_idx
 * @mic_len: mic length in bytes
 * @hw_cipher: a HW cipher index used in host commands
 */
struct iwm_fw_cipher_scheme {
        uint32_t cipher;
        uint8_t flags;
        uint8_t hdr_len;
        uint8_t pn_len;
        uint8_t pn_off;
        uint8_t key_idx_off;
        uint8_t key_idx_mask;
        uint8_t key_idx_shift;
        uint8_t mic_len;
        uint8_t hw_cipher;
} __packed;

/**
 * struct iwm_fw_cscheme_list - a cipher scheme list
 * @size: a number of entries
 * @cs: cipher scheme entries
 */
struct iwm_fw_cscheme_list {
        uint8_t size;
        struct iwm_fw_cipher_scheme cs[];
} __packed;

/*
 * END iwl-fw.h
 */

/*
 * BEGIN iwl-fw-file.h
 */

/* v1/v2 uCode file layout */
struct iwm_ucode_header {
        uint32_t ver;   /* major/minor/API/serial */
        union {
                struct {
                        uint32_t inst_size;     /* bytes of runtime code */
                        uint32_t data_size;     /* bytes of runtime data */
                        uint32_t init_size;     /* bytes of init code */
                        uint32_t init_data_size;        /* bytes of init data */
                        uint32_t boot_size;     /* bytes of bootstrap code */
                        uint8_t data[0];                /* in same order as sizes */
                } v1;
                struct {
                        uint32_t build;         /* build number */
                        uint32_t inst_size;     /* bytes of runtime code */
                        uint32_t data_size;     /* bytes of runtime data */
                        uint32_t init_size;     /* bytes of init code */
                        uint32_t init_data_size;        /* bytes of init data */
                        uint32_t boot_size;     /* bytes of bootstrap code */
                        uint8_t data[0];                /* in same order as sizes */
                } v2;
        } u;
};

/*
 * new TLV uCode file layout
 *
 * The new TLV file format contains TLVs, that each specify
 * some piece of data.
 */

enum iwm_ucode_tlv_type {
        IWM_UCODE_TLV_INVALID           = 0, /* unused */
        IWM_UCODE_TLV_INST              = 1,
        IWM_UCODE_TLV_DATA              = 2,
        IWM_UCODE_TLV_INIT              = 3,
        IWM_UCODE_TLV_INIT_DATA         = 4,
        IWM_UCODE_TLV_BOOT              = 5,
        IWM_UCODE_TLV_PROBE_MAX_LEN     = 6, /* a uint32_t value */
        IWM_UCODE_TLV_PAN               = 7,
        IWM_UCODE_TLV_RUNT_EVTLOG_PTR   = 8,
        IWM_UCODE_TLV_RUNT_EVTLOG_SIZE  = 9,
        IWM_UCODE_TLV_RUNT_ERRLOG_PTR   = 10,
        IWM_UCODE_TLV_INIT_EVTLOG_PTR   = 11,
        IWM_UCODE_TLV_INIT_EVTLOG_SIZE  = 12,
        IWM_UCODE_TLV_INIT_ERRLOG_PTR   = 13,
        IWM_UCODE_TLV_ENHANCE_SENS_TBL  = 14,
        IWM_UCODE_TLV_PHY_CALIBRATION_SIZE = 15,
        IWM_UCODE_TLV_WOWLAN_INST       = 16,
        IWM_UCODE_TLV_WOWLAN_DATA       = 17,
        IWM_UCODE_TLV_FLAGS             = 18,
        IWM_UCODE_TLV_SEC_RT            = 19,
        IWM_UCODE_TLV_SEC_INIT          = 20,
        IWM_UCODE_TLV_SEC_WOWLAN        = 21,
        IWM_UCODE_TLV_DEF_CALIB         = 22,
        IWM_UCODE_TLV_PHY_SKU           = 23,
        IWM_UCODE_TLV_SECURE_SEC_RT     = 24,
        IWM_UCODE_TLV_SECURE_SEC_INIT   = 25,
        IWM_UCODE_TLV_SECURE_SEC_WOWLAN = 26,
        IWM_UCODE_TLV_NUM_OF_CPU        = 27,
        IWM_UCODE_TLV_CSCHEME           = 28,

        /*
         * Following two are not in our base tag, but allow
         * handling ucode version 9.
         */
        IWM_UCODE_TLV_API_CHANGES_SET   = 29,
        IWM_UCODE_TLV_ENABLED_CAPABILITIES = 30,

        IWM_UCODE_TLV_N_SCAN_CHANNELS   = 31,
        IWM_UCODE_TLV_PAGING            = 32,
        IWM_UCODE_TLV_SEC_RT_USNIFFER   = 34,
        IWM_UCODE_TLV_SDIO_ADMA_ADDR    = 35,
        IWM_UCODE_TLV_FW_VERSION        = 36,
        IWM_UCODE_TLV_FW_DBG_DEST       = 38,
        IWM_UCODE_TLV_FW_DBG_CONF       = 39,
        IWM_UCODE_TLV_FW_DBG_TRIGGER    = 40,
        IWM_UCODE_TLV_FW_GSCAN_CAPA     = 50,
        IWM_UCODE_TLV_FW_MEM_SEG        = 51,
};

struct iwm_ucode_tlv {
        uint32_t type;          /* see above */
        uint32_t length;                /* not including type/length fields */
        uint8_t data[0];
};

struct iwm_ucode_api {
        uint32_t api_index;
        uint32_t api_flags;
} __packed;

struct iwm_ucode_capa {
        uint32_t api_index;
        uint32_t api_capa;
} __packed;

#define IWM_TLV_UCODE_MAGIC     0x0a4c5749

struct iwm_tlv_ucode_header {
        /*
         * The TLV style ucode header is distinguished from
         * the v1/v2 style header by first four bytes being
         * zero, as such is an invalid combination of
         * major/minor/API/serial versions.
         */
        uint32_t zero;
        uint32_t magic;
        uint8_t human_readable[64];
        uint32_t ver;           /* major/minor/API/serial */
        uint32_t build;
        uint64_t ignore;
        /*
         * The data contained herein has a TLV layout,
         * see above for the TLV header and types.
         * Note that each TLV is padded to a length
         * that is a multiple of 4 for alignment.
         */
        uint8_t data[0];
};

/*
 * END iwl-fw-file.h
 */

/*
 * BEGIN iwl-prph.h
 */

/*
 * Registers in this file are internal, not PCI bus memory mapped.
 * Driver accesses these via IWM_HBUS_TARG_PRPH_* registers.
 */
#define IWM_PRPH_BASE   (0x00000)
#define IWM_PRPH_END    (0xFFFFF)

/* APMG (power management) constants */
#define IWM_APMG_BASE                   (IWM_PRPH_BASE + 0x3000)
#define IWM_APMG_CLK_CTRL_REG           (IWM_APMG_BASE + 0x0000)
#define IWM_APMG_CLK_EN_REG             (IWM_APMG_BASE + 0x0004)
#define IWM_APMG_CLK_DIS_REG            (IWM_APMG_BASE + 0x0008)
#define IWM_APMG_PS_CTRL_REG            (IWM_APMG_BASE + 0x000c)
#define IWM_APMG_PCIDEV_STT_REG         (IWM_APMG_BASE + 0x0010)
#define IWM_APMG_RFKILL_REG             (IWM_APMG_BASE + 0x0014)
#define IWM_APMG_RTC_INT_STT_REG        (IWM_APMG_BASE + 0x001c)
#define IWM_APMG_RTC_INT_MSK_REG        (IWM_APMG_BASE + 0x0020)
#define IWM_APMG_DIGITAL_SVR_REG        (IWM_APMG_BASE + 0x0058)
#define IWM_APMG_ANALOG_SVR_REG         (IWM_APMG_BASE + 0x006C)

#define IWM_APMS_CLK_VAL_MRB_FUNC_MODE  (0x00000001)
#define IWM_APMG_CLK_VAL_DMA_CLK_RQT    (0x00000200)
#define IWM_APMG_CLK_VAL_BSM_CLK_RQT    (0x00000800)

#define IWM_APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS        (0x00400000)
#define IWM_APMG_PS_CTRL_VAL_RESET_REQ                  (0x04000000)
#define IWM_APMG_PS_CTRL_MSK_PWR_SRC                    (0x03000000)
#define IWM_APMG_PS_CTRL_VAL_PWR_SRC_VMAIN              (0x00000000)
#define IWM_APMG_PS_CTRL_VAL_PWR_SRC_VAUX               (0x02000000)
#define IWM_APMG_SVR_VOLTAGE_CONFIG_BIT_MSK             (0x000001E0) /* bit 8:5 */
#define IWM_APMG_SVR_DIGITAL_VOLTAGE_1_32               (0x00000060)

#define IWM_APMG_PCIDEV_STT_VAL_L1_ACT_DIS              (0x00000800)

#define IWM_APMG_RTC_INT_STT_RFKILL                     (0x10000000)

/* Device system time */
#define IWM_DEVICE_SYSTEM_TIME_REG 0xA0206C

/* Device NMI register */
#define IWM_DEVICE_SET_NMI_REG          0x00a01c30
#define IWM_DEVICE_SET_NMI_VAL_HW       0x01
#define IWM_DEVICE_SET_NMI_VAL_DRV      0x80
#define IWM_DEVICE_SET_NMI_8000_REG     0x00a01c24
#define IWM_DEVICE_SET_NMI_8000_VAL     0x1000000

/*
 * Device reset for family 8000
 * write to bit 24 in order to reset the CPU
 */
#define IWM_RELEASE_CPU_RESET           0x300c
#define IWM_RELEASE_CPU_RESET_BIT       0x1000000


/*****************************************************************************
 *                        7000/3000 series SHR DTS addresses                 *
 *****************************************************************************/

#define IWM_SHR_MISC_WFM_DTS_EN         (0x00a10024)
#define IWM_DTSC_CFG_MODE               (0x00a10604)
#define IWM_DTSC_VREF_AVG               (0x00a10648)
#define IWM_DTSC_VREF5_AVG              (0x00a1064c)
#define IWM_DTSC_CFG_MODE_PERIODIC      (0x2)
#define IWM_DTSC_PTAT_AVG               (0x00a10650)


/**
 * Tx Scheduler
 *
 * The Tx Scheduler selects the next frame to be transmitted, choosing TFDs
 * (Transmit Frame Descriptors) from up to 16 circular Tx queues resident in
 * host DRAM.  It steers each frame's Tx command (which contains the frame
 * data) into one of up to 7 prioritized Tx DMA FIFO channels within the
 * device.  A queue maps to only one (selectable by driver) Tx DMA channel,
 * but one DMA channel may take input from several queues.
 *
 * Tx DMA FIFOs have dedicated purposes.
 *
 * For 5000 series and up, they are used differently
 * (cf. iwl5000_default_queue_to_tx_fifo in iwl-5000.c):
 *
 * 0 -- EDCA BK (background) frames, lowest priority
 * 1 -- EDCA BE (best effort) frames, normal priority
 * 2 -- EDCA VI (video) frames, higher priority
 * 3 -- EDCA VO (voice) and management frames, highest priority
 * 4 -- unused
 * 5 -- unused
 * 6 -- unused
 * 7 -- Commands
 *
 * Driver should normally map queues 0-6 to Tx DMA/FIFO channels 0-6.
 * In addition, driver can map the remaining queues to Tx DMA/FIFO
 * channels 0-3 to support 11n aggregation via EDCA DMA channels.
 *
 * The driver sets up each queue to work in one of two modes:
 *
 * 1)  Scheduler-Ack, in which the scheduler automatically supports a
 *     block-ack (BA) window of up to 64 TFDs.  In this mode, each queue
 *     contains TFDs for a unique combination of Recipient Address (RA)
 *     and Traffic Identifier (TID), that is, traffic of a given
 *     Quality-Of-Service (QOS) priority, destined for a single station.
 *
 *     In scheduler-ack mode, the scheduler keeps track of the Tx status of
 *     each frame within the BA window, including whether it's been transmitted,
 *     and whether it's been acknowledged by the receiving station.  The device
 *     automatically processes block-acks received from the receiving STA,
 *     and reschedules un-acked frames to be retransmitted (successful
 *     Tx completion may end up being out-of-order).
 *
 *     The driver must maintain the queue's Byte Count table in host DRAM
 *     for this mode.
 *     This mode does not support fragmentation.
 *
 * 2)  FIFO (a.k.a. non-Scheduler-ACK), in which each TFD is processed in order.
 *     The device may automatically retry Tx, but will retry only one frame
 *     at a time, until receiving ACK from receiving station, or reaching
 *     retry limit and giving up.
 *
 *     The command queue (#4/#9) must use this mode!
 *     This mode does not require use of the Byte Count table in host DRAM.
 *
 * Driver controls scheduler operation via 3 means:
 * 1)  Scheduler registers
 * 2)  Shared scheduler data base in internal SRAM
 * 3)  Shared data in host DRAM
 *
 * Initialization:
 *
 * When loading, driver should allocate memory for:
 * 1)  16 TFD circular buffers, each with space for (typically) 256 TFDs.
 * 2)  16 Byte Count circular buffers in 16 KBytes contiguous memory
 *     (1024 bytes for each queue).
 *
 * After receiving "Alive" response from uCode, driver must initialize
 * the scheduler (especially for queue #4/#9, the command queue, otherwise
 * the driver can't issue commands!):
 */
#define IWM_SCD_MEM_LOWER_BOUND         (0x0000)

/**
 * Max Tx window size is the max number of contiguous TFDs that the scheduler
 * can keep track of at one time when creating block-ack chains of frames.
 * Note that "64" matches the number of ack bits in a block-ack packet.
 */
#define IWM_SCD_WIN_SIZE                                64
#define IWM_SCD_FRAME_LIMIT                             64

#define IWM_SCD_TXFIFO_POS_TID                  (0)
#define IWM_SCD_TXFIFO_POS_RA                   (4)
#define IWM_SCD_QUEUE_RA_TID_MAP_RATID_MSK      (0x01FF)

/* agn SCD */
#define IWM_SCD_QUEUE_STTS_REG_POS_TXF          (0)
#define IWM_SCD_QUEUE_STTS_REG_POS_ACTIVE       (3)
#define IWM_SCD_QUEUE_STTS_REG_POS_WSL          (4)
#define IWM_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN   (19)
#define IWM_SCD_QUEUE_STTS_REG_MSK              (0x017F0000)

#define IWM_SCD_QUEUE_CTX_REG1_CREDIT_POS       (8)
#define IWM_SCD_QUEUE_CTX_REG1_CREDIT_MSK       (0x00FFFF00)
#define IWM_SCD_QUEUE_CTX_REG1_SUPER_CREDIT_POS (24)
#define IWM_SCD_QUEUE_CTX_REG1_SUPER_CREDIT_MSK (0xFF000000)
#define IWM_SCD_QUEUE_CTX_REG2_WIN_SIZE_POS     (0)
#define IWM_SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK     (0x0000007F)
#define IWM_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS  (16)
#define IWM_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK  (0x007F0000)
#define IWM_SCD_GP_CTRL_ENABLE_31_QUEUES        (1 << 0)
#define IWM_SCD_GP_CTRL_AUTO_ACTIVE_MODE        (1 << 18)

/* Context Data */
#define IWM_SCD_CONTEXT_MEM_LOWER_BOUND (IWM_SCD_MEM_LOWER_BOUND + 0x600)
#define IWM_SCD_CONTEXT_MEM_UPPER_BOUND (IWM_SCD_MEM_LOWER_BOUND + 0x6A0)

/* Tx status */
#define IWM_SCD_TX_STTS_MEM_LOWER_BOUND (IWM_SCD_MEM_LOWER_BOUND + 0x6A0)
#define IWM_SCD_TX_STTS_MEM_UPPER_BOUND (IWM_SCD_MEM_LOWER_BOUND + 0x7E0)

/* Translation Data */
#define IWM_SCD_TRANS_TBL_MEM_LOWER_BOUND (IWM_SCD_MEM_LOWER_BOUND + 0x7E0)
#define IWM_SCD_TRANS_TBL_MEM_UPPER_BOUND (IWM_SCD_MEM_LOWER_BOUND + 0x808)

#define IWM_SCD_CONTEXT_QUEUE_OFFSET(x)\
        (IWM_SCD_CONTEXT_MEM_LOWER_BOUND + ((x) * 8))

#define IWM_SCD_TX_STTS_QUEUE_OFFSET(x)\
        (IWM_SCD_TX_STTS_MEM_LOWER_BOUND + ((x) * 16))

#define IWM_SCD_TRANS_TBL_OFFSET_QUEUE(x) \
        ((IWM_SCD_TRANS_TBL_MEM_LOWER_BOUND + ((x) * 2)) & 0xfffc)

#define IWM_SCD_BASE                    (IWM_PRPH_BASE + 0xa02c00)

#define IWM_SCD_SRAM_BASE_ADDR  (IWM_SCD_BASE + 0x0)
#define IWM_SCD_DRAM_BASE_ADDR  (IWM_SCD_BASE + 0x8)
#define IWM_SCD_AIT             (IWM_SCD_BASE + 0x0c)
#define IWM_SCD_TXFACT          (IWM_SCD_BASE + 0x10)
#define IWM_SCD_ACTIVE          (IWM_SCD_BASE + 0x14)
#define IWM_SCD_QUEUECHAIN_SEL  (IWM_SCD_BASE + 0xe8)
#define IWM_SCD_CHAINEXT_EN     (IWM_SCD_BASE + 0x244)
#define IWM_SCD_AGGR_SEL        (IWM_SCD_BASE + 0x248)
#define IWM_SCD_INTERRUPT_MASK  (IWM_SCD_BASE + 0x108)
#define IWM_SCD_GP_CTRL         (IWM_SCD_BASE + 0x1a8)
#define IWM_SCD_EN_CTRL         (IWM_SCD_BASE + 0x254)

static inline unsigned int IWM_SCD_QUEUE_WRPTR(unsigned int chnl)
{
        if (chnl < 20)
                return IWM_SCD_BASE + 0x18 + chnl * 4;
        return IWM_SCD_BASE + 0x284 + (chnl - 20) * 4;
}

static inline unsigned int IWM_SCD_QUEUE_RDPTR(unsigned int chnl)
{
        if (chnl < 20)
                return IWM_SCD_BASE + 0x68 + chnl * 4;
        return IWM_SCD_BASE + 0x2B4 + (chnl - 20) * 4;
}

static inline unsigned int IWM_SCD_QUEUE_STATUS_BITS(unsigned int chnl)
{
        if (chnl < 20)
                return IWM_SCD_BASE + 0x10c + chnl * 4;
        return IWM_SCD_BASE + 0x384 + (chnl - 20) * 4;
}

/*********************** END TX SCHEDULER *************************************/

/* Oscillator clock */
#define IWM_OSC_CLK                             (0xa04068)
#define IWM_OSC_CLK_FORCE_CONTROL               (0x8)

/*
 * END iwl-prph.h
 */

/*
 * BEGIN iwl-fh.h
 */

/****************************/
/* Flow Handler Definitions */
/****************************/

/**
 * This I/O area is directly read/writable by driver (e.g. Linux uses writel())
 * Addresses are offsets from device's PCI hardware base address.
 */
#define IWM_FH_MEM_LOWER_BOUND                   (0x1000)
#define IWM_FH_MEM_UPPER_BOUND                   (0x2000)

/**
 * Keep-Warm (KW) buffer base address.
 *
 * Driver must allocate a 4KByte buffer that is for keeping the
 * host DRAM powered on (via dummy accesses to DRAM) to maintain low-latency
 * DRAM access when doing Txing or Rxing.  The dummy accesses prevent host
 * from going into a power-savings mode that would cause higher DRAM latency,
 * and possible data over/under-runs, before all Tx/Rx is complete.
 *
 * Driver loads IWM_FH_KW_MEM_ADDR_REG with the physical address (bits 35:4)
 * of the buffer, which must be 4K aligned.  Once this is set up, the device
 * automatically invokes keep-warm accesses when normal accesses might not
 * be sufficient to maintain fast DRAM response.
 *
 * Bit fields:
 *  31-0:  Keep-warm buffer physical base address [35:4], must be 4K aligned
 */
#define IWM_FH_KW_MEM_ADDR_REG               (IWM_FH_MEM_LOWER_BOUND + 0x97C)


/**
 * TFD Circular Buffers Base (CBBC) addresses
 *
 * Device has 16 base pointer registers, one for each of 16 host-DRAM-resident
 * circular buffers (CBs/queues) containing Transmit Frame Descriptors (TFDs)
 * (see struct iwm_tfd_frame).  These 16 pointer registers are offset by 0x04
 * bytes from one another.  Each TFD circular buffer in DRAM must be 256-byte
 * aligned (address bits 0-7 must be 0).
 * Later devices have 20 (5000 series) or 30 (higher) queues, but the registers
 * for them are in different places.
 *
 * Bit fields in each pointer register:
 *  27-0: TFD CB physical base address [35:8], must be 256-byte aligned
 */
#define IWM_FH_MEM_CBBC_0_15_LOWER_BOUND        (IWM_FH_MEM_LOWER_BOUND + 0x9D0)
#define IWM_FH_MEM_CBBC_0_15_UPPER_BOUN         (IWM_FH_MEM_LOWER_BOUND + 0xA10)
#define IWM_FH_MEM_CBBC_16_19_LOWER_BOUND       (IWM_FH_MEM_LOWER_BOUND + 0xBF0)
#define IWM_FH_MEM_CBBC_16_19_UPPER_BOUND       (IWM_FH_MEM_LOWER_BOUND + 0xC00)
#define IWM_FH_MEM_CBBC_20_31_LOWER_BOUND       (IWM_FH_MEM_LOWER_BOUND + 0xB20)
#define IWM_FH_MEM_CBBC_20_31_UPPER_BOUND       (IWM_FH_MEM_LOWER_BOUND + 0xB80)

/* Find TFD CB base pointer for given queue */
static inline unsigned int IWM_FH_MEM_CBBC_QUEUE(unsigned int chnl)
{
        if (chnl < 16)
                return IWM_FH_MEM_CBBC_0_15_LOWER_BOUND + 4 * chnl;
        if (chnl < 20)
                return IWM_FH_MEM_CBBC_16_19_LOWER_BOUND + 4 * (chnl - 16);
        return IWM_FH_MEM_CBBC_20_31_LOWER_BOUND + 4 * (chnl - 20);
}


/**
 * Rx SRAM Control and Status Registers (RSCSR)
 *
 * These registers provide handshake between driver and device for the Rx queue
 * (this queue handles *all* command responses, notifications, Rx data, etc.
 * sent from uCode to host driver).  Unlike Tx, there is only one Rx
 * queue, and only one Rx DMA/FIFO channel.  Also unlike Tx, which can
 * concatenate up to 20 DRAM buffers to form a Tx frame, each Receive Buffer
 * Descriptor (RBD) points to only one Rx Buffer (RB); there is a 1:1
 * mapping between RBDs and RBs.
 *
 * Driver must allocate host DRAM memory for the following, and set the
 * physical address of each into device registers:
 *
 * 1)  Receive Buffer Descriptor (RBD) circular buffer (CB), typically with 256
 *     entries (although any power of 2, up to 4096, is selectable by driver).
 *     Each entry (1 dword) points to a receive buffer (RB) of consistent size
 *     (typically 4K, although 8K or 16K are also selectable by driver).
 *     Driver sets up RB size and number of RBDs in the CB via Rx config
 *     register IWM_FH_MEM_RCSR_CHNL0_CONFIG_REG.
 *
 *     Bit fields within one RBD:
 *     27-0:  Receive Buffer physical address bits [35:8], 256-byte aligned
 *
 *     Driver sets physical address [35:8] of base of RBD circular buffer
 *     into IWM_FH_RSCSR_CHNL0_RBDCB_BASE_REG [27:0].
 *
 * 2)  Rx status buffer, 8 bytes, in which uCode indicates which Rx Buffers
 *     (RBs) have been filled, via a "write pointer", actually the index of
 *     the RB's corresponding RBD within the circular buffer.  Driver sets
 *     physical address [35:4] into IWM_FH_RSCSR_CHNL0_STTS_WPTR_REG [31:0].
 *
 *     Bit fields in lower dword of Rx status buffer (upper dword not used
 *     by driver:
 *     31-12:  Not used by driver
 *     11- 0:  Index of last filled Rx buffer descriptor
 *             (device writes, driver reads this value)
 *
 * As the driver prepares Receive Buffers (RBs) for device to fill, driver must
 * enter pointers to these RBs into contiguous RBD circular buffer entries,
 * and update the device's "write" index register,
 * IWM_FH_RSCSR_CHNL0_RBDCB_WPTR_REG.
 *
 * This "write" index corresponds to the *next* RBD that the driver will make
 * available, i.e. one RBD past the tail of the ready-to-fill RBDs within
 * the circular buffer.  This value should initially be 0 (before preparing any
 * RBs), should be 8 after preparing the first 8 RBs (for example), and must
 * wrap back to 0 at the end of the circular buffer (but don't wrap before
 * "read" index has advanced past 1!  See below).
 * NOTE:  DEVICE EXPECTS THE WRITE INDEX TO BE INCREMENTED IN MULTIPLES OF 8.
 *
 * As the device fills RBs (referenced from contiguous RBDs within the circular
 * buffer), it updates the Rx status buffer in host DRAM, 2) described above,
 * to tell the driver the index of the latest filled RBD.  The driver must
 * read this "read" index from DRAM after receiving an Rx interrupt from device
 *
 * The driver must also internally keep track of a third index, which is the
 * next RBD to process.  When receiving an Rx interrupt, driver should process
 * all filled but unprocessed RBs up to, but not including, the RB
 * corresponding to the "read" index.  For example, if "read" index becomes "1",
 * driver may process the RB pointed to by RBD 0.  Depending on volume of
 * traffic, there may be many RBs to process.
 *
 * If read index == write index, device thinks there is no room to put new data.
 * Due to this, the maximum number of filled RBs is 255, instead of 256.  To
 * be safe, make sure that there is a gap of at least 2 RBDs between "write"
 * and "read" indexes; that is, make sure that there are no more than 254
 * buffers waiting to be filled.
 */
#define IWM_FH_MEM_RSCSR_LOWER_BOUND    (IWM_FH_MEM_LOWER_BOUND + 0xBC0)
#define IWM_FH_MEM_RSCSR_UPPER_BOUND    (IWM_FH_MEM_LOWER_BOUND + 0xC00)
#define IWM_FH_MEM_RSCSR_CHNL0          (IWM_FH_MEM_RSCSR_LOWER_BOUND)

/**
 * Physical base address of 8-byte Rx Status buffer.
 * Bit fields:
 *  31-0: Rx status buffer physical base address [35:4], must 16-byte aligned.
 */
#define IWM_FH_RSCSR_CHNL0_STTS_WPTR_REG        (IWM_FH_MEM_RSCSR_CHNL0)

/**
 * Physical base address of Rx Buffer Descriptor Circular Buffer.
 * Bit fields:
 *  27-0:  RBD CD physical base address [35:8], must be 256-byte aligned.
 */
#define IWM_FH_RSCSR_CHNL0_RBDCB_BASE_REG       (IWM_FH_MEM_RSCSR_CHNL0 + 0x004)

/**
 * Rx write pointer (index, really!).
 * Bit fields:
 *  11-0:  Index of driver's most recent prepared-to-be-filled RBD, + 1.
 *         NOTE:  For 256-entry circular buffer, use only bits [7:0].
 */
#define IWM_FH_RSCSR_CHNL0_RBDCB_WPTR_REG       (IWM_FH_MEM_RSCSR_CHNL0 + 0x008)
#define IWM_FH_RSCSR_CHNL0_WPTR         (IWM_FH_RSCSR_CHNL0_RBDCB_WPTR_REG)

#define IWM_FW_RSCSR_CHNL0_RXDCB_RDPTR_REG      (IWM_FH_MEM_RSCSR_CHNL0 + 0x00c)
#define IWM_FH_RSCSR_CHNL0_RDPTR                IWM_FW_RSCSR_CHNL0_RXDCB_RDPTR_REG

/**
 * Rx Config/Status Registers (RCSR)
 * Rx Config Reg for channel 0 (only channel used)
 *
 * Driver must initialize IWM_FH_MEM_RCSR_CHNL0_CONFIG_REG as follows for
 * normal operation (see bit fields).
 *
 * Clearing IWM_FH_MEM_RCSR_CHNL0_CONFIG_REG to 0 turns off Rx DMA.
 * Driver should poll IWM_FH_MEM_RSSR_RX_STATUS_REG     for
 * IWM_FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (bit 24) before continuing.
 *
 * Bit fields:
 * 31-30: Rx DMA channel enable: '00' off/pause, '01' pause at end of frame,
 *        '10' operate normally
 * 29-24: reserved
 * 23-20: # RBDs in circular buffer = 2^value; use "8" for 256 RBDs (normal),
 *        min "5" for 32 RBDs, max "12" for 4096 RBDs.
 * 19-18: reserved
 * 17-16: size of each receive buffer; '00' 4K (normal), '01' 8K,
 *        '10' 12K, '11' 16K.
 * 15-14: reserved
 * 13-12: IRQ destination; '00' none, '01' host driver (normal operation)
 * 11- 4: timeout for closing Rx buffer and interrupting host (units 32 usec)
 *        typical value 0x10 (about 1/2 msec)
 *  3- 0: reserved
 */
#define IWM_FH_MEM_RCSR_LOWER_BOUND      (IWM_FH_MEM_LOWER_BOUND + 0xC00)
#define IWM_FH_MEM_RCSR_UPPER_BOUND      (IWM_FH_MEM_LOWER_BOUND + 0xCC0)
#define IWM_FH_MEM_RCSR_CHNL0            (IWM_FH_MEM_RCSR_LOWER_BOUND)

#define IWM_FH_MEM_RCSR_CHNL0_CONFIG_REG        (IWM_FH_MEM_RCSR_CHNL0)
#define IWM_FH_MEM_RCSR_CHNL0_RBDCB_WPTR        (IWM_FH_MEM_RCSR_CHNL0 + 0x8)
#define IWM_FH_MEM_RCSR_CHNL0_FLUSH_RB_REQ      (IWM_FH_MEM_RCSR_CHNL0 + 0x10)

#define IWM_FH_RCSR_CHNL0_RX_CONFIG_RB_TIMEOUT_MSK (0x00000FF0) /* bits 4-11 */
#define IWM_FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_MSK   (0x00001000) /* bits 12 */
#define IWM_FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK (0x00008000) /* bit 15 */
#define IWM_FH_RCSR_CHNL0_RX_CONFIG_RB_SIZE_MSK   (0x00030000) /* bits 16-17 */
#define IWM_FH_RCSR_CHNL0_RX_CONFIG_RBDBC_SIZE_MSK (0x00F00000) /* bits 20-23 */
#define IWM_FH_RCSR_CHNL0_RX_CONFIG_DMA_CHNL_EN_MSK (0xC0000000) /* bits 30-31*/

#define IWM_FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS    (20)
#define IWM_FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS  (4)
#define IWM_RX_RB_TIMEOUT       (0x11)

#define IWM_FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_VAL         (0x00000000)
#define IWM_FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_EOF_VAL     (0x40000000)
#define IWM_FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL        (0x80000000)

#define IWM_FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K    (0x00000000)
#define IWM_FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K    (0x00010000)
#define IWM_FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_12K   (0x00020000)
#define IWM_FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_16K   (0x00030000)

#define IWM_FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY              (0x00000004)
#define IWM_FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_NO_INT_VAL    (0x00000000)
#define IWM_FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL  (0x00001000)

/**
 * Rx Shared Status Registers (RSSR)
 *
 * After stopping Rx DMA channel (writing 0 to
 * IWM_FH_MEM_RCSR_CHNL0_CONFIG_REG), driver must poll
 * IWM_FH_MEM_RSSR_RX_STATUS_REG until Rx channel is idle.
 *
 * Bit fields:
 *  24:  1 = Channel 0 is idle
 *
 * IWM_FH_MEM_RSSR_SHARED_CTRL_REG and IWM_FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV
 * contain default values that should not be altered by the driver.
 */
#define IWM_FH_MEM_RSSR_LOWER_BOUND     (IWM_FH_MEM_LOWER_BOUND + 0xC40)
#define IWM_FH_MEM_RSSR_UPPER_BOUND     (IWM_FH_MEM_LOWER_BOUND + 0xD00)

#define IWM_FH_MEM_RSSR_SHARED_CTRL_REG (IWM_FH_MEM_RSSR_LOWER_BOUND)
#define IWM_FH_MEM_RSSR_RX_STATUS_REG   (IWM_FH_MEM_RSSR_LOWER_BOUND + 0x004)
#define IWM_FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV\
                                        (IWM_FH_MEM_RSSR_LOWER_BOUND + 0x008)

#define IWM_FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE   (0x01000000)

#define IWM_FH_MEM_TFDIB_REG1_ADDR_BITSHIFT     28

/* TFDB  Area - TFDs buffer table */
#define IWM_FH_MEM_TFDIB_DRAM_ADDR_LSB_MSK      (0xFFFFFFFF)
#define IWM_FH_TFDIB_LOWER_BOUND       (IWM_FH_MEM_LOWER_BOUND + 0x900)
#define IWM_FH_TFDIB_UPPER_BOUND       (IWM_FH_MEM_LOWER_BOUND + 0x958)
#define IWM_FH_TFDIB_CTRL0_REG(_chnl)  (IWM_FH_TFDIB_LOWER_BOUND + 0x8 * (_chnl))
#define IWM_FH_TFDIB_CTRL1_REG(_chnl)  (IWM_FH_TFDIB_LOWER_BOUND + 0x8 * (_chnl) + 0x4)

/**
 * Transmit DMA Channel Control/Status Registers (TCSR)
 *
 * Device has one configuration register for each of 8 Tx DMA/FIFO channels
 * supported in hardware (don't confuse these with the 16 Tx queues in DRAM,
 * which feed the DMA/FIFO channels); config regs are separated by 0x20 bytes.
 *
 * To use a Tx DMA channel, driver must initialize its
 * IWM_FH_TCSR_CHNL_TX_CONFIG_REG(chnl) with:
 *
 * IWM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE |
 * IWM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL
 *
 * All other bits should be 0.
 *
 * Bit fields:
 * 31-30: Tx DMA channel enable: '00' off/pause, '01' pause at end of frame,
 *        '10' operate normally
 * 29- 4: Reserved, set to "0"
 *     3: Enable internal DMA requests (1, normal operation), disable (0)
 *  2- 0: Reserved, set to "0"
 */
#define IWM_FH_TCSR_LOWER_BOUND  (IWM_FH_MEM_LOWER_BOUND + 0xD00)
#define IWM_FH_TCSR_UPPER_BOUND  (IWM_FH_MEM_LOWER_BOUND + 0xE60)

/* Find Control/Status reg for given Tx DMA/FIFO channel */
#define IWM_FH_TCSR_CHNL_NUM                            (8)

/* TCSR: tx_config register values */
#define IWM_FH_TCSR_CHNL_TX_CONFIG_REG(_chnl)   \
                (IWM_FH_TCSR_LOWER_BOUND + 0x20 * (_chnl))
#define IWM_FH_TCSR_CHNL_TX_CREDIT_REG(_chnl)   \
                (IWM_FH_TCSR_LOWER_BOUND + 0x20 * (_chnl) + 0x4)
#define IWM_FH_TCSR_CHNL_TX_BUF_STS_REG(_chnl)  \
                (IWM_FH_TCSR_LOWER_BOUND + 0x20 * (_chnl) + 0x8)

#define IWM_FH_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF      (0x00000000)
#define IWM_FH_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_DRV      (0x00000001)

#define IWM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE        (0x00000000)
#define IWM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE         (0x00000008)

#define IWM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_NOINT   (0x00000000)
#define IWM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_ENDTFD  (0x00100000)
#define IWM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD   (0x00200000)

#define IWM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT    (0x00000000)
#define IWM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_ENDTFD   (0x00400000)
#define IWM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_IFTFD    (0x00800000)

#define IWM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE            (0x00000000)
#define IWM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE_EOF        (0x40000000)
#define IWM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE           (0x80000000)

#define IWM_FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_EMPTY  (0x00000000)
#define IWM_FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_WAIT   (0x00002000)
#define IWM_FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_VALID  (0x00000003)

#define IWM_FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_NUM              (20)
#define IWM_FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_IDX              (12)

/**
 * Tx Shared Status Registers (TSSR)
 *
 * After stopping Tx DMA channel (writing 0 to
 * IWM_FH_TCSR_CHNL_TX_CONFIG_REG(chnl)), driver must poll
 * IWM_FH_TSSR_TX_STATUS_REG until selected Tx channel is idle
 * (channel's buffers empty | no pending requests).
 *
 * Bit fields:
 * 31-24:  1 = Channel buffers empty (channel 7:0)
 * 23-16:  1 = No pending requests (channel 7:0)
 */
#define IWM_FH_TSSR_LOWER_BOUND         (IWM_FH_MEM_LOWER_BOUND + 0xEA0)
#define IWM_FH_TSSR_UPPER_BOUND         (IWM_FH_MEM_LOWER_BOUND + 0xEC0)

#define IWM_FH_TSSR_TX_STATUS_REG       (IWM_FH_TSSR_LOWER_BOUND + 0x010)

/**
 * Bit fields for TSSR(Tx Shared Status & Control) error status register:
 * 31:  Indicates an address error when accessed to internal memory
 *      uCode/driver must write "1" in order to clear this flag
 * 30:  Indicates that Host did not send the expected number of dwords to FH
 *      uCode/driver must write "1" in order to clear this flag
 * 16-9:Each status bit is for one channel. Indicates that an (Error) ActDMA
 *      command was received from the scheduler while the TRB was already full
 *      with previous command
 *      uCode/driver must write "1" in order to clear this flag
 * 7-0: Each status bit indicates a channel's TxCredit error. When an error
 *      bit is set, it indicates that the FH has received a full indication
 *      from the RTC TxFIFO and the current value of the TxCredit counter was
 *      not equal to zero. This mean that the credit mechanism was not
 *      synchronized to the TxFIFO status
 *      uCode/driver must write "1" in order to clear this flag
 */
#define IWM_FH_TSSR_TX_ERROR_REG        (IWM_FH_TSSR_LOWER_BOUND + 0x018)
#define IWM_FH_TSSR_TX_MSG_CONFIG_REG   (IWM_FH_TSSR_LOWER_BOUND + 0x008)

#define IWM_FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(_chnl) ((1 << (_chnl)) << 16)

/* Tx service channels */
#define IWM_FH_SRVC_CHNL                (9)
#define IWM_FH_SRVC_LOWER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0x9C8)
#define IWM_FH_SRVC_UPPER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0x9D0)
#define IWM_FH_SRVC_CHNL_SRAM_ADDR_REG(_chnl) \
                (IWM_FH_SRVC_LOWER_BOUND + ((_chnl) - 9) * 0x4)

#define IWM_FH_TX_CHICKEN_BITS_REG      (IWM_FH_MEM_LOWER_BOUND + 0xE98)
#define IWM_FH_TX_TRB_REG(_chan)        (IWM_FH_MEM_LOWER_BOUND + 0x958 + \
                                        (_chan) * 4)

/* Instruct FH to increment the retry count of a packet when
 * it is brought from the memory to TX-FIFO
 */
#define IWM_FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN        (0x00000002)

#define IWM_RX_QUEUE_SIZE                         256
#define IWM_RX_QUEUE_MASK                         255
#define IWM_RX_QUEUE_SIZE_LOG                     8

/*
 * RX related structures and functions
 */
#define IWM_RX_FREE_BUFFERS 64
#define IWM_RX_LOW_WATERMARK 8

/**
 * struct iwm_rb_status - reseve buffer status
 *      host memory mapped FH registers
 * @closed_rb_num [0:11] - Indicates the index of the RB which was closed
 * @closed_fr_num [0:11] - Indicates the index of the RX Frame which was closed
 * @finished_rb_num [0:11] - Indicates the index of the current RB
 *      in which the last frame was written to
 * @finished_fr_num [0:11] - Indicates the index of the RX Frame
 *      which was transferred
 */
struct iwm_rb_status {
        uint16_t closed_rb_num;
        uint16_t closed_fr_num;
        uint16_t finished_rb_num;
        uint16_t finished_fr_nam;
        uint32_t unused;
} __packed;


#define IWM_TFD_QUEUE_SIZE_MAX          (256)
#define IWM_TFD_QUEUE_SIZE_BC_DUP       (64)
#define IWM_TFD_QUEUE_BC_SIZE           (IWM_TFD_QUEUE_SIZE_MAX + \
                                        IWM_TFD_QUEUE_SIZE_BC_DUP)
#define IWM_TX_DMA_MASK        DMA_BIT_MASK(36)
#define IWM_NUM_OF_TBS          20

static inline uint8_t iwm_get_dma_hi_addr(bus_addr_t addr)
{
        return (sizeof(addr) > sizeof(uint32_t) ? (addr >> 16) >> 16 : 0) & 0xF;
}
/**
 * struct iwm_tfd_tb transmit buffer descriptor within transmit frame descriptor
 *
 * This structure contains dma address and length of transmission address
 *
 * @lo: low [31:0] portion of the dma address of TX buffer
 *      every even is unaligned on 16 bit boundary
 * @hi_n_len 0-3 [35:32] portion of dma
 *           4-15 length of the tx buffer
 */
struct iwm_tfd_tb {
        uint32_t lo;
        uint16_t hi_n_len;
} __packed;

/**
 * struct iwm_tfd
 *
 * Transmit Frame Descriptor (TFD)
 *
 * @ __reserved1[3] reserved
 * @ num_tbs 0-4 number of active tbs
 *           5   reserved
 *           6-7 padding (not used)
 * @ tbs[20]    transmit frame buffer descriptors
 * @ __pad      padding
 *
 * Each Tx queue uses a circular buffer of 256 TFDs stored in host DRAM.
 * Both driver and device share these circular buffers, each of which must be
 * contiguous 256 TFDs x 128 bytes-per-TFD = 32 KBytes
 *
 * Driver must indicate the physical address of the base of each
 * circular buffer via the IWM_FH_MEM_CBBC_QUEUE registers.
 *
 * Each TFD contains pointer/size information for up to 20 data buffers
 * in host DRAM.  These buffers collectively contain the (one) frame described
 * by the TFD.  Each buffer must be a single contiguous block of memory within
 * itself, but buffers may be scattered in host DRAM.  Each buffer has max size
 * of (4K - 4).  The concatenates all of a TFD's buffers into a single
 * Tx frame, up to 8 KBytes in size.
 *
 * A maximum of 255 (not 256!) TFDs may be on a queue waiting for Tx.
 */
struct iwm_tfd {
        uint8_t __reserved1[3];
        uint8_t num_tbs;
        struct iwm_tfd_tb tbs[IWM_NUM_OF_TBS];
        uint32_t __pad;
} __packed;

/* Keep Warm Size */
#define IWM_KW_SIZE 0x1000      /* 4k */

/* Fixed (non-configurable) rx data from phy */

/**
 * struct iwm_agn_schedq_bc_tbl scheduler byte count table
 *      base physical address provided by IWM_SCD_DRAM_BASE_ADDR
 * @tfd_offset  0-12 - tx command byte count
 *             12-16 - station index
 */
struct iwm_agn_scd_bc_tbl {
        uint16_t tfd_offset[IWM_TFD_QUEUE_BC_SIZE];
} __packed;

/*
 * END iwl-fh.h
 */

/*
 * BEGIN mvm/fw-api.h
 */

/* Maximum number of Tx queues. */
#define IWM_MVM_MAX_QUEUES      31

/* Tx queue numbers */
enum {
        IWM_MVM_OFFCHANNEL_QUEUE = 8,
        IWM_MVM_CMD_QUEUE = 9,
        IWM_MVM_AUX_QUEUE = 15,
};

enum iwm_mvm_tx_fifo {
        IWM_MVM_TX_FIFO_BK = 0,
        IWM_MVM_TX_FIFO_BE,
        IWM_MVM_TX_FIFO_VI,
        IWM_MVM_TX_FIFO_VO,
        IWM_MVM_TX_FIFO_MCAST = 5,
        IWM_MVM_TX_FIFO_CMD = 7,
};

#define IWM_MVM_STATION_COUNT   16

/* commands */
enum {
        IWM_MVM_ALIVE = 0x1,
        IWM_REPLY_ERROR = 0x2,

        IWM_INIT_COMPLETE_NOTIF = 0x4,

        /* PHY context commands */
        IWM_PHY_CONTEXT_CMD = 0x8,
        IWM_DBG_CFG = 0x9,

        /* UMAC scan commands */
        IWM_SCAN_ITERATION_COMPLETE_UMAC = 0xb5,
        IWM_SCAN_CFG_CMD = 0xc,
        IWM_SCAN_REQ_UMAC = 0xd,
        IWM_SCAN_ABORT_UMAC = 0xe,
        IWM_SCAN_COMPLETE_UMAC = 0xf,

        /* station table */
        IWM_ADD_STA_KEY = 0x17,
        IWM_ADD_STA = 0x18,
        IWM_REMOVE_STA = 0x19,

        /* TX */
        IWM_TX_CMD = 0x1c,
        IWM_TXPATH_FLUSH = 0x1e,
        IWM_MGMT_MCAST_KEY = 0x1f,

        /* scheduler config */
        IWM_SCD_QUEUE_CFG = 0x1d,

        /* global key */
        IWM_WEP_KEY = 0x20,

        /* MAC and Binding commands */
        IWM_MAC_CONTEXT_CMD = 0x28,
        IWM_TIME_EVENT_CMD = 0x29, /* both CMD and response */
        IWM_TIME_EVENT_NOTIFICATION = 0x2a,
        IWM_BINDING_CONTEXT_CMD = 0x2b,
        IWM_TIME_QUOTA_CMD = 0x2c,
        IWM_NON_QOS_TX_COUNTER_CMD = 0x2d,

        IWM_LQ_CMD = 0x4e,

        /* paging block to FW cpu2 */
        IWM_FW_PAGING_BLOCK_CMD = 0x4f,

        /* Scan offload */
        IWM_SCAN_OFFLOAD_REQUEST_CMD = 0x51,
        IWM_SCAN_OFFLOAD_ABORT_CMD = 0x52,
        IWM_HOT_SPOT_CMD = 0x53,
        IWM_SCAN_OFFLOAD_COMPLETE = 0x6d,
        IWM_SCAN_OFFLOAD_UPDATE_PROFILES_CMD = 0x6e,
        IWM_SCAN_OFFLOAD_CONFIG_CMD = 0x6f,
        IWM_MATCH_FOUND_NOTIFICATION = 0xd9,
        IWM_SCAN_ITERATION_COMPLETE = 0xe7,

        /* Phy */
        IWM_PHY_CONFIGURATION_CMD = 0x6a,
        IWM_CALIB_RES_NOTIF_PHY_DB = 0x6b,
        IWM_PHY_DB_CMD = 0x6c,

        /* Power - legacy power table command */
        IWM_POWER_TABLE_CMD = 0x77,
        IWM_PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION = 0x78,
        IWM_LTR_CONFIG = 0xee,

        /* Thermal Throttling*/
        IWM_REPLY_THERMAL_MNG_BACKOFF = 0x7e,

        /* NVM */
        IWM_NVM_ACCESS_CMD = 0x88,

        IWM_SET_CALIB_DEFAULT_CMD = 0x8e,

        IWM_BEACON_NOTIFICATION = 0x90,
        IWM_BEACON_TEMPLATE_CMD = 0x91,
        IWM_TX_ANT_CONFIGURATION_CMD = 0x98,
        IWM_BT_CONFIG = 0x9b,
        IWM_STATISTICS_NOTIFICATION = 0x9d,
        IWM_REDUCE_TX_POWER_CMD = 0x9f,

        /* RF-KILL commands and notifications */
        IWM_CARD_STATE_CMD = 0xa0,
        IWM_CARD_STATE_NOTIFICATION = 0xa1,

        IWM_MISSED_BEACONS_NOTIFICATION = 0xa2,

        IWM_MFUART_LOAD_NOTIFICATION = 0xb1,

        /* Power - new power table command */
        IWM_MAC_PM_POWER_TABLE = 0xa9,

        IWM_REPLY_RX_PHY_CMD = 0xc0,
        IWM_REPLY_RX_MPDU_CMD = 0xc1,
        IWM_BA_NOTIF = 0xc5,

        /* Location Aware Regulatory */
        IWM_MCC_UPDATE_CMD = 0xc8,
        IWM_MCC_CHUB_UPDATE_CMD = 0xc9,

        /* BT Coex */
        IWM_BT_COEX_PRIO_TABLE = 0xcc,
        IWM_BT_COEX_PROT_ENV = 0xcd,
        IWM_BT_PROFILE_NOTIFICATION = 0xce,
        IWM_BT_COEX_CI = 0x5d,

        IWM_REPLY_SF_CFG_CMD = 0xd1,
        IWM_REPLY_BEACON_FILTERING_CMD = 0xd2,

        /* DTS measurements */
        IWM_CMD_DTS_MEASUREMENT_TRIGGER = 0xdc,
        IWM_DTS_MEASUREMENT_NOTIFICATION = 0xdd,

        IWM_REPLY_DEBUG_CMD = 0xf0,
        IWM_DEBUG_LOG_MSG = 0xf7,

        IWM_MCAST_FILTER_CMD = 0xd0,

        /* D3 commands/notifications */
        IWM_D3_CONFIG_CMD = 0xd3,
        IWM_PROT_OFFLOAD_CONFIG_CMD = 0xd4,
        IWM_OFFLOADS_QUERY_CMD = 0xd5,
        IWM_REMOTE_WAKE_CONFIG_CMD = 0xd6,

        /* for WoWLAN in particular */
        IWM_WOWLAN_PATTERNS = 0xe0,
        IWM_WOWLAN_CONFIGURATION = 0xe1,
        IWM_WOWLAN_TSC_RSC_PARAM = 0xe2,
        IWM_WOWLAN_TKIP_PARAM = 0xe3,
        IWM_WOWLAN_KEK_KCK_MATERIAL = 0xe4,
        IWM_WOWLAN_GET_STATUSES = 0xe5,
        IWM_WOWLAN_TX_POWER_PER_DB = 0xe6,

        /* and for NetDetect */
        IWM_NET_DETECT_CONFIG_CMD = 0x54,
        IWM_NET_DETECT_PROFILES_QUERY_CMD = 0x56,
        IWM_NET_DETECT_PROFILES_CMD = 0x57,
        IWM_NET_DETECT_HOTSPOTS_CMD = 0x58,
        IWM_NET_DETECT_HOTSPOTS_QUERY_CMD = 0x59,

        IWM_REPLY_MAX = 0xff,
};

enum iwm_phy_ops_subcmd_ids {
        IWM_CMD_DTS_MEASUREMENT_TRIGGER_WIDE = 0x0,
        IWM_CTDP_CONFIG_CMD = 0x03,
        IWM_TEMP_REPORTING_THRESHOLDS_CMD = 0x04,
        IWM_CT_KILL_NOTIFICATION = 0xFE,
        IWM_DTS_MEASUREMENT_NOTIF_WIDE = 0xFF,
};

/* command groups */
enum {
        IWM_LEGACY_GROUP = 0x0,
        IWM_LONG_GROUP = 0x1,
        IWM_SYSTEM_GROUP = 0x2,
        IWM_MAC_CONF_GROUP = 0x3,
        IWM_PHY_OPS_GROUP = 0x4,
        IWM_DATA_PATH_GROUP = 0x5,
        IWM_PROT_OFFLOAD_GROUP = 0xb,
};

/**
 * struct iwm_cmd_response - generic response struct for most commands
 * @status: status of the command asked, changes for each one
 */
struct iwm_cmd_response {
        uint32_t status;
};

/*
 * struct iwm_tx_ant_cfg_cmd
 * @valid: valid antenna configuration
 */
struct iwm_tx_ant_cfg_cmd {
        uint32_t valid;
} __packed;

/**
 * struct iwm_reduce_tx_power_cmd - TX power reduction command
 * IWM_REDUCE_TX_POWER_CMD = 0x9f
 * @flags: (reserved for future implementation)
 * @mac_context_id: id of the mac ctx for which we are reducing TX power.
 * @pwr_restriction: TX power restriction in dBms.
 */
struct iwm_reduce_tx_power_cmd {
        uint8_t flags;
        uint8_t mac_context_id;
        uint16_t pwr_restriction;
} __packed; /* IWM_TX_REDUCED_POWER_API_S_VER_1 */

enum iwm_dev_tx_power_cmd_mode {
        IWM_TX_POWER_MODE_SET_MAC = 0,
        IWM_TX_POWER_MODE_SET_DEVICE = 1,
        IWM_TX_POWER_MODE_SET_CHAINS = 2,
        IWM_TX_POWER_MODE_SET_ACK = 3,
}; /* TX_POWER_REDUCED_FLAGS_TYPE_API_E_VER_4 */;

#define IWM_NUM_CHAIN_LIMITS    2
#define IWM_NUM_SUB_BANDS       5

/**
 * struct iwm_dev_tx_power_cmd - TX power reduction command
 * @set_mode: see &enum iwl_dev_tx_power_cmd_mode
 * @mac_context_id: id of the mac ctx for which we are reducing TX power.
 * @pwr_restriction: TX power restriction in 1/8 dBms.
 * @dev_24: device TX power restriction in 1/8 dBms
 * @dev_52_low: device TX power restriction upper band - low
 * @dev_52_high: device TX power restriction upper band - high
 * @per_chain_restriction: per chain restrictions
 */
struct iwm_dev_tx_power_cmd_v3 {
        uint32_t set_mode;
        uint32_t mac_context_id;
        uint16_t pwr_restriction;
        uint16_t dev_24;
        uint16_t dev_52_low;
        uint16_t dev_52_high;
        uint16_t per_chain_restriction[IWM_NUM_CHAIN_LIMITS][IWM_NUM_SUB_BANDS];
} __packed; /* TX_REDUCED_POWER_API_S_VER_3 */

#define IWM_DEV_MAX_TX_POWER 0x7FFF

/**
 * struct iwm_dev_tx_power_cmd - TX power reduction command
 * @v3: version 3 of the command, embedded here for easier software handling
 * @enable_ack_reduction: enable or disable close range ack TX power
 *      reduction.
 */
struct iwm_dev_tx_power_cmd {
        /* v4 is just an extension of v3 - keep this here */
        struct iwm_dev_tx_power_cmd_v3 v3;
        uint8_t enable_ack_reduction;
        uint8_t reserved[3];
} __packed; /* TX_REDUCED_POWER_API_S_VER_4 */

/*
 * Calibration control struct.
 * Sent as part of the phy configuration command.
 * @flow_trigger: bitmap for which calibrations to perform according to
 *              flow triggers.
 * @event_trigger: bitmap for which calibrations to perform according to
 *              event triggers.
 */
struct iwm_calib_ctrl {
        uint32_t flow_trigger;
        uint32_t event_trigger;
} __packed;

/* This enum defines the bitmap of various calibrations to enable in both
 * init ucode and runtime ucode through IWM_CALIBRATION_CFG_CMD.
 */
enum iwm_calib_cfg {
        IWM_CALIB_CFG_XTAL_IDX                  = (1 << 0),
        IWM_CALIB_CFG_TEMPERATURE_IDX           = (1 << 1),
        IWM_CALIB_CFG_VOLTAGE_READ_IDX          = (1 << 2),
        IWM_CALIB_CFG_PAPD_IDX                  = (1 << 3),
        IWM_CALIB_CFG_TX_PWR_IDX                = (1 << 4),
        IWM_CALIB_CFG_DC_IDX                    = (1 << 5),
        IWM_CALIB_CFG_BB_FILTER_IDX             = (1 << 6),
        IWM_CALIB_CFG_LO_LEAKAGE_IDX            = (1 << 7),
        IWM_CALIB_CFG_TX_IQ_IDX                 = (1 << 8),
        IWM_CALIB_CFG_TX_IQ_SKEW_IDX            = (1 << 9),
        IWM_CALIB_CFG_RX_IQ_IDX                 = (1 << 10),
        IWM_CALIB_CFG_RX_IQ_SKEW_IDX            = (1 << 11),
        IWM_CALIB_CFG_SENSITIVITY_IDX           = (1 << 12),
        IWM_CALIB_CFG_CHAIN_NOISE_IDX           = (1 << 13),
        IWM_CALIB_CFG_DISCONNECTED_ANT_IDX      = (1 << 14),
        IWM_CALIB_CFG_ANT_COUPLING_IDX          = (1 << 15),
        IWM_CALIB_CFG_DAC_IDX                   = (1 << 16),
        IWM_CALIB_CFG_ABS_IDX                   = (1 << 17),
        IWM_CALIB_CFG_AGC_IDX                   = (1 << 18),
};

/*
 * Phy configuration command.
 */
struct iwm_phy_cfg_cmd {
        uint32_t        phy_cfg;
        struct iwm_calib_ctrl calib_control;
} __packed;

#define IWM_PHY_CFG_RADIO_TYPE  ((1 << 0) | (1 << 1))
#define IWM_PHY_CFG_RADIO_STEP  ((1 << 2) | (1 << 3))
#define IWM_PHY_CFG_RADIO_DASH  ((1 << 4) | (1 << 5))
#define IWM_PHY_CFG_PRODUCT_NUMBER      ((1 << 6) | (1 << 7))
#define IWM_PHY_CFG_TX_CHAIN_A  (1 << 8)
#define IWM_PHY_CFG_TX_CHAIN_B  (1 << 9)
#define IWM_PHY_CFG_TX_CHAIN_C  (1 << 10)
#define IWM_PHY_CFG_RX_CHAIN_A  (1 << 12)
#define IWM_PHY_CFG_RX_CHAIN_B  (1 << 13)
#define IWM_PHY_CFG_RX_CHAIN_C  (1 << 14)


/* Target of the IWM_NVM_ACCESS_CMD */
enum {
        IWM_NVM_ACCESS_TARGET_CACHE = 0,
        IWM_NVM_ACCESS_TARGET_OTP = 1,
        IWM_NVM_ACCESS_TARGET_EEPROM = 2,
};

/* Section types for IWM_NVM_ACCESS_CMD */
enum {
        IWM_NVM_SECTION_TYPE_SW = 1,
        IWM_NVM_SECTION_TYPE_REGULATORY = 3,
        IWM_NVM_SECTION_TYPE_CALIBRATION = 4,
        IWM_NVM_SECTION_TYPE_PRODUCTION = 5,
        IWM_NVM_SECTION_TYPE_MAC_OVERRIDE = 11,
        IWM_NVM_SECTION_TYPE_PHY_SKU = 12,
        IWM_NVM_MAX_NUM_SECTIONS = 13,
};

/**
 * struct iwm_nvm_access_cmd_ver2 - Request the device to send an NVM section
 * @op_code: 0 - read, 1 - write
 * @target: IWM_NVM_ACCESS_TARGET_*
 * @type: IWM_NVM_SECTION_TYPE_*
 * @offset: offset in bytes into the section
 * @length: in bytes, to read/write
 * @data: if write operation, the data to write. On read its empty
 */
struct iwm_nvm_access_cmd {
        uint8_t op_code;
        uint8_t target;
        uint16_t type;
        uint16_t offset;
        uint16_t length;
        uint8_t data[];
} __packed; /* IWM_NVM_ACCESS_CMD_API_S_VER_2 */

#define IWM_NUM_OF_FW_PAGING_BLOCKS 33 /* 32 for data and 1 block for CSS */

/*
 * struct iwm_fw_paging_cmd - paging layout
 *
 * (IWM_FW_PAGING_BLOCK_CMD = 0x4f)
 *
 * Send to FW the paging layout in the driver.
 *
 * @flags: various flags for the command
 * @block_size: the block size in powers of 2
 * @block_num: number of blocks specified in the command.
 * @device_phy_addr: virtual addresses from device side
*/
struct iwm_fw_paging_cmd {
        uint32_t flags;
        uint32_t block_size;
        uint32_t block_num;
        uint32_t device_phy_addr[IWM_NUM_OF_FW_PAGING_BLOCKS];
} __packed; /* IWM_FW_PAGING_BLOCK_CMD_API_S_VER_1 */

/*
 * Fw items ID's
 *
 * @IWM_FW_ITEM_ID_PAGING: Address of the pages that the FW will upload
 *      download
 */
enum iwm_fw_item_id {
        IWM_FW_ITEM_ID_PAGING = 3,
};

/*
 * struct iwm_fw_get_item_cmd - get an item from the fw
 */
struct iwm_fw_get_item_cmd {
        uint32_t item_id;
} __packed; /* IWM_FW_GET_ITEM_CMD_API_S_VER_1 */

/**
 * struct iwm_nvm_access_resp_ver2 - response to IWM_NVM_ACCESS_CMD
 * @offset: offset in bytes into the section
 * @length: in bytes, either how much was written or read
 * @type: IWM_NVM_SECTION_TYPE_*
 * @status: 0 for success, fail otherwise
 * @data: if read operation, the data returned. Empty on write.
 */
struct iwm_nvm_access_resp {
        uint16_t offset;
        uint16_t length;
        uint16_t type;
        uint16_t status;
        uint8_t data[];
} __packed; /* IWM_NVM_ACCESS_CMD_RESP_API_S_VER_2 */

/* IWM_MVM_ALIVE 0x1 */

/* alive response is_valid values */
#define IWM_ALIVE_RESP_UCODE_OK (1 << 0)
#define IWM_ALIVE_RESP_RFKILL   (1 << 1)

/* alive response ver_type values */
enum {
        IWM_FW_TYPE_HW = 0,
        IWM_FW_TYPE_PROT = 1,
        IWM_FW_TYPE_AP = 2,
        IWM_FW_TYPE_WOWLAN = 3,
        IWM_FW_TYPE_TIMING = 4,
        IWM_FW_TYPE_WIPAN = 5
};

/* alive response ver_subtype values */
enum {
        IWM_FW_SUBTYPE_FULL_FEATURE = 0,
        IWM_FW_SUBTYPE_BOOTSRAP = 1, /* Not valid */
        IWM_FW_SUBTYPE_REDUCED = 2,
        IWM_FW_SUBTYPE_ALIVE_ONLY = 3,
        IWM_FW_SUBTYPE_WOWLAN = 4,
        IWM_FW_SUBTYPE_AP_SUBTYPE = 5,
        IWM_FW_SUBTYPE_WIPAN = 6,
        IWM_FW_SUBTYPE_INITIALIZE = 9
};

#define IWM_ALIVE_STATUS_ERR 0xDEAD
#define IWM_ALIVE_STATUS_OK 0xCAFE

#define IWM_ALIVE_FLG_RFKILL    (1 << 0)

struct iwm_mvm_alive_resp_ver1 {
        uint16_t status;
        uint16_t flags;
        uint8_t ucode_minor;
        uint8_t ucode_major;
        uint16_t id;
        uint8_t api_minor;
        uint8_t api_major;
        uint8_t ver_subtype;
        uint8_t ver_type;
        uint8_t mac;
        uint8_t opt;
        uint16_t reserved2;
        uint32_t timestamp;
        uint32_t error_event_table_ptr; /* SRAM address for error log */
        uint32_t log_event_table_ptr;   /* SRAM address for event log */
        uint32_t cpu_register_ptr;
        uint32_t dbgm_config_ptr;
        uint32_t alive_counter_ptr;
        uint32_t scd_base_ptr;          /* SRAM address for SCD */
} __packed; /* IWM_ALIVE_RES_API_S_VER_1 */

struct iwm_mvm_alive_resp_ver2 {
        uint16_t status;
        uint16_t flags;
        uint8_t ucode_minor;
        uint8_t ucode_major;
        uint16_t id;
        uint8_t api_minor;
        uint8_t api_major;
        uint8_t ver_subtype;
        uint8_t ver_type;
        uint8_t mac;
        uint8_t opt;
        uint16_t reserved2;
        uint32_t timestamp;
        uint32_t error_event_table_ptr; /* SRAM address for error log */
        uint32_t log_event_table_ptr;   /* SRAM address for LMAC event log */
        uint32_t cpu_register_ptr;
        uint32_t dbgm_config_ptr;
        uint32_t alive_counter_ptr;
        uint32_t scd_base_ptr;          /* SRAM address for SCD */
        uint32_t st_fwrd_addr;          /* pointer to Store and forward */
        uint32_t st_fwrd_size;
        uint8_t umac_minor;             /* UMAC version: minor */
        uint8_t umac_major;             /* UMAC version: major */
        uint16_t umac_id;               /* UMAC version: id */
        uint32_t error_info_addr;       /* SRAM address for UMAC error log */
        uint32_t dbg_print_buff_addr;
} __packed; /* ALIVE_RES_API_S_VER_2 */

struct iwm_mvm_alive_resp {
        uint16_t status;
        uint16_t flags;
        uint32_t ucode_minor;
        uint32_t ucode_major;
        uint8_t ver_subtype;
        uint8_t ver_type;
        uint8_t mac;
        uint8_t opt;
        uint32_t timestamp;
        uint32_t error_event_table_ptr; /* SRAM address for error log */
        uint32_t log_event_table_ptr;   /* SRAM address for LMAC event log */
        uint32_t cpu_register_ptr;
        uint32_t dbgm_config_ptr;
        uint32_t alive_counter_ptr;
        uint32_t scd_base_ptr;          /* SRAM address for SCD */
        uint32_t st_fwrd_addr;          /* pointer to Store and forward */
        uint32_t st_fwrd_size;
        uint32_t umac_minor;            /* UMAC version: minor */
        uint32_t umac_major;            /* UMAC version: major */
        uint32_t error_info_addr;       /* SRAM address for UMAC error log */
        uint32_t dbg_print_buff_addr;
} __packed; /* ALIVE_RES_API_S_VER_3 */

/* Error response/notification */
enum {
        IWM_FW_ERR_UNKNOWN_CMD = 0x0,
        IWM_FW_ERR_INVALID_CMD_PARAM = 0x1,
        IWM_FW_ERR_SERVICE = 0x2,
        IWM_FW_ERR_ARC_MEMORY = 0x3,
        IWM_FW_ERR_ARC_CODE = 0x4,
        IWM_FW_ERR_WATCH_DOG = 0x5,
        IWM_FW_ERR_WEP_GRP_KEY_INDX = 0x10,
        IWM_FW_ERR_WEP_KEY_SIZE = 0x11,
        IWM_FW_ERR_OBSOLETE_FUNC = 0x12,
        IWM_FW_ERR_UNEXPECTED = 0xFE,
        IWM_FW_ERR_FATAL = 0xFF
};

/**
 * struct iwm_error_resp - FW error indication
 * ( IWM_REPLY_ERROR = 0x2 )
 * @error_type: one of IWM_FW_ERR_*
 * @cmd_id: the command ID for which the error occurred
 * @bad_cmd_seq_num: sequence number of the erroneous command
 * @error_service: which service created the error, applicable only if
 *      error_type = 2, otherwise 0
 * @timestamp: TSF in usecs.
 */
struct iwm_error_resp {
        uint32_t error_type;
        uint8_t cmd_id;
        uint8_t reserved1;
        uint16_t bad_cmd_seq_num;
        uint32_t error_service;
        uint64_t timestamp;
} __packed;


/* Common PHY, MAC and Bindings definitions */

#define IWM_MAX_MACS_IN_BINDING (3)
#define IWM_MAX_BINDINGS                (4)
#define IWM_AUX_BINDING_INDEX   (3)
#define IWM_MAX_PHYS            (4)

/* Used to extract ID and color from the context dword */
#define IWM_FW_CTXT_ID_POS        (0)
#define IWM_FW_CTXT_ID_MSK        (0xff << IWM_FW_CTXT_ID_POS)
#define IWM_FW_CTXT_COLOR_POS (8)
#define IWM_FW_CTXT_COLOR_MSK (0xff << IWM_FW_CTXT_COLOR_POS)
#define IWM_FW_CTXT_INVALID       (0xffffffff)

#define IWM_FW_CMD_ID_AND_COLOR(_id, _color) ((_id << IWM_FW_CTXT_ID_POS) |\
                                          (_color << IWM_FW_CTXT_COLOR_POS))

/* Possible actions on PHYs, MACs and Bindings */
enum {
        IWM_FW_CTXT_ACTION_STUB = 0,
        IWM_FW_CTXT_ACTION_ADD,
        IWM_FW_CTXT_ACTION_MODIFY,
        IWM_FW_CTXT_ACTION_REMOVE,
        IWM_FW_CTXT_ACTION_NUM
}; /* COMMON_CONTEXT_ACTION_API_E_VER_1 */

/* Time Events */

/* Time Event types, according to MAC type */
enum iwm_time_event_type {
        /* BSS Station Events */
        IWM_TE_BSS_STA_AGGRESSIVE_ASSOC,
        IWM_TE_BSS_STA_ASSOC,
        IWM_TE_BSS_EAP_DHCP_PROT,
        IWM_TE_BSS_QUIET_PERIOD,

        /* P2P Device Events */
        IWM_TE_P2P_DEVICE_DISCOVERABLE,
        IWM_TE_P2P_DEVICE_LISTEN,
        IWM_TE_P2P_DEVICE_ACTION_SCAN,
        IWM_TE_P2P_DEVICE_FULL_SCAN,

        /* P2P Client Events */
        IWM_TE_P2P_CLIENT_AGGRESSIVE_ASSOC,
        IWM_TE_P2P_CLIENT_ASSOC,
        IWM_TE_P2P_CLIENT_QUIET_PERIOD,

        /* P2P GO Events */
        IWM_TE_P2P_GO_ASSOC_PROT,
        IWM_TE_P2P_GO_REPETITIVE_NOA,
        IWM_TE_P2P_GO_CT_WINDOW,

        /* WiDi Sync Events */
        IWM_TE_WIDI_TX_SYNC,

        IWM_TE_MAX
}; /* IWM_MAC_EVENT_TYPE_API_E_VER_1 */



/* Time event - defines for command API v1 */

/*
 * @IWM_TE_V1_FRAG_NONE: fragmentation of the time event is NOT allowed.
 * @IWM_TE_V1_FRAG_SINGLE: fragmentation of the time event is allowed, but only
 *      the first fragment is scheduled.
 * @IWM_TE_V1_FRAG_DUAL: fragmentation of the time event is allowed, but only
 *      the first 2 fragments are scheduled.
 * @IWM_TE_V1_FRAG_ENDLESS: fragmentation of the time event is allowed, and any
 *      number of fragments are valid.
 *
 * Other than the constant defined above, specifying a fragmentation value 'x'
 * means that the event can be fragmented but only the first 'x' will be
 * scheduled.
 */
enum {
        IWM_TE_V1_FRAG_NONE = 0,
        IWM_TE_V1_FRAG_SINGLE = 1,
        IWM_TE_V1_FRAG_DUAL = 2,
        IWM_TE_V1_FRAG_ENDLESS = 0xffffffff
};

/* If a Time Event can be fragmented, this is the max number of fragments */
#define IWM_TE_V1_FRAG_MAX_MSK          0x0fffffff
/* Repeat the time event endlessly (until removed) */
#define IWM_TE_V1_REPEAT_ENDLESS        0xffffffff
/* If a Time Event has bounded repetitions, this is the maximal value */
#define IWM_TE_V1_REPEAT_MAX_MSK_V1     0x0fffffff

/* Time Event dependencies: none, on another TE, or in a specific time */
enum {
        IWM_TE_V1_INDEPENDENT           = 0,
        IWM_TE_V1_DEP_OTHER             = (1 << 0),
        IWM_TE_V1_DEP_TSF               = (1 << 1),
        IWM_TE_V1_EVENT_SOCIOPATHIC     = (1 << 2),
}; /* IWM_MAC_EVENT_DEPENDENCY_POLICY_API_E_VER_2 */

/*
 * @IWM_TE_V1_NOTIF_NONE: no notifications
 * @IWM_TE_V1_NOTIF_HOST_EVENT_START: request/receive notification on event start
 * @IWM_TE_V1_NOTIF_HOST_EVENT_END:request/receive notification on event end
 * @IWM_TE_V1_NOTIF_INTERNAL_EVENT_START: internal FW use
 * @IWM_TE_V1_NOTIF_INTERNAL_EVENT_END: internal FW use.
 * @IWM_TE_V1_NOTIF_HOST_FRAG_START: request/receive notification on frag start
 * @IWM_TE_V1_NOTIF_HOST_FRAG_END:request/receive notification on frag end
 * @IWM_TE_V1_NOTIF_INTERNAL_FRAG_START: internal FW use.
 * @IWM_TE_V1_NOTIF_INTERNAL_FRAG_END: internal FW use.
 *
 * Supported Time event notifications configuration.
 * A notification (both event and fragment) includes a status indicating weather
 * the FW was able to schedule the event or not. For fragment start/end
 * notification the status is always success. There is no start/end fragment
 * notification for monolithic events.
 */
enum {
        IWM_TE_V1_NOTIF_NONE = 0,
        IWM_TE_V1_NOTIF_HOST_EVENT_START = (1 << 0),
        IWM_TE_V1_NOTIF_HOST_EVENT_END = (1 << 1),
        IWM_TE_V1_NOTIF_INTERNAL_EVENT_START = (1 << 2),
        IWM_TE_V1_NOTIF_INTERNAL_EVENT_END = (1 << 3),
        IWM_TE_V1_NOTIF_HOST_FRAG_START = (1 << 4),
        IWM_TE_V1_NOTIF_HOST_FRAG_END = (1 << 5),
        IWM_TE_V1_NOTIF_INTERNAL_FRAG_START = (1 << 6),
        IWM_TE_V1_NOTIF_INTERNAL_FRAG_END = (1 << 7),
        IWM_T2_V2_START_IMMEDIATELY = (1 << 11),
}; /* IWM_MAC_EVENT_ACTION_API_E_VER_2 */

/* Time event - defines for command API */

/*
 * @IWM_TE_V2_FRAG_NONE: fragmentation of the time event is NOT allowed.
 * @IWM_TE_V2_FRAG_SINGLE: fragmentation of the time event is allowed, but only
 *  the first fragment is scheduled.
 * @IWM_TE_V2_FRAG_DUAL: fragmentation of the time event is allowed, but only
 *  the first 2 fragments are scheduled.
 * @IWM_TE_V2_FRAG_ENDLESS: fragmentation of the time event is allowed, and any
 *  number of fragments are valid.
 *
 * Other than the constant defined above, specifying a fragmentation value 'x'
 * means that the event can be fragmented but only the first 'x' will be
 * scheduled.
 */
enum {
        IWM_TE_V2_FRAG_NONE = 0,
        IWM_TE_V2_FRAG_SINGLE = 1,
        IWM_TE_V2_FRAG_DUAL = 2,
        IWM_TE_V2_FRAG_MAX = 0xfe,
        IWM_TE_V2_FRAG_ENDLESS = 0xff
};

/* Repeat the time event endlessly (until removed) */
#define IWM_TE_V2_REPEAT_ENDLESS        0xff
/* If a Time Event has bounded repetitions, this is the maximal value */
#define IWM_TE_V2_REPEAT_MAX    0xfe

#define IWM_TE_V2_PLACEMENT_POS 12
#define IWM_TE_V2_ABSENCE_POS   15

/* Time event policy values
 * A notification (both event and fragment) includes a status indicating weather
 * the FW was able to schedule the event or not. For fragment start/end
 * notification the status is always success. There is no start/end fragment
 * notification for monolithic events.
 *
 * @IWM_TE_V2_DEFAULT_POLICY: independent, social, present, unoticable
 * @IWM_TE_V2_NOTIF_HOST_EVENT_START: request/receive notification on event start
 * @IWM_TE_V2_NOTIF_HOST_EVENT_END:request/receive notification on event end
 * @IWM_TE_V2_NOTIF_INTERNAL_EVENT_START: internal FW use
 * @IWM_TE_V2_NOTIF_INTERNAL_EVENT_END: internal FW use.
 * @IWM_TE_V2_NOTIF_HOST_FRAG_START: request/receive notification on frag start
 * @IWM_TE_V2_NOTIF_HOST_FRAG_END:request/receive notification on frag end
 * @IWM_TE_V2_NOTIF_INTERNAL_FRAG_START: internal FW use.
 * @IWM_TE_V2_NOTIF_INTERNAL_FRAG_END: internal FW use.
 * @IWM_TE_V2_DEP_OTHER: depends on another time event
 * @IWM_TE_V2_DEP_TSF: depends on a specific time
 * @IWM_TE_V2_EVENT_SOCIOPATHIC: can't co-exist with other events of tha same MAC
 * @IWM_TE_V2_ABSENCE: are we present or absent during the Time Event.
 */
enum {
        IWM_TE_V2_DEFAULT_POLICY = 0x0,

        /* notifications (event start/stop, fragment start/stop) */
        IWM_TE_V2_NOTIF_HOST_EVENT_START = (1 << 0),
        IWM_TE_V2_NOTIF_HOST_EVENT_END = (1 << 1),
        IWM_TE_V2_NOTIF_INTERNAL_EVENT_START = (1 << 2),
        IWM_TE_V2_NOTIF_INTERNAL_EVENT_END = (1 << 3),

        IWM_TE_V2_NOTIF_HOST_FRAG_START = (1 << 4),
        IWM_TE_V2_NOTIF_HOST_FRAG_END = (1 << 5),
        IWM_TE_V2_NOTIF_INTERNAL_FRAG_START = (1 << 6),
        IWM_TE_V2_NOTIF_INTERNAL_FRAG_END = (1 << 7),

        IWM_TE_V2_NOTIF_MSK = 0xff,

        /* placement characteristics */
        IWM_TE_V2_DEP_OTHER = (1 << IWM_TE_V2_PLACEMENT_POS),
        IWM_TE_V2_DEP_TSF = (1 << (IWM_TE_V2_PLACEMENT_POS + 1)),
        IWM_TE_V2_EVENT_SOCIOPATHIC = (1 << (IWM_TE_V2_PLACEMENT_POS + 2)),

        /* are we present or absent during the Time Event. */
        IWM_TE_V2_ABSENCE = (1 << IWM_TE_V2_ABSENCE_POS),
};

/**
 * struct iwm_time_event_cmd_api - configuring Time Events
 * with struct IWM_MAC_TIME_EVENT_DATA_API_S_VER_2 (see also
 * with version 1. determined by IWM_UCODE_TLV_FLAGS)
 * ( IWM_TIME_EVENT_CMD = 0x29 )
 * @id_and_color: ID and color of the relevant MAC
 * @action: action to perform, one of IWM_FW_CTXT_ACTION_*
 * @id: this field has two meanings, depending on the action:
 *      If the action is ADD, then it means the type of event to add.
 *      For all other actions it is the unique event ID assigned when the
 *      event was added by the FW.
 * @apply_time: When to start the Time Event (in GP2)
 * @max_delay: maximum delay to event's start (apply time), in TU
 * @depends_on: the unique ID of the event we depend on (if any)
 * @interval: interval between repetitions, in TU
 * @duration: duration of event in TU
 * @repeat: how many repetitions to do, can be IWM_TE_REPEAT_ENDLESS
 * @max_frags: maximal number of fragments the Time Event can be divided to
 * @policy: defines whether uCode shall notify the host or other uCode modules
 *      on event and/or fragment start and/or end
 *      using one of IWM_TE_INDEPENDENT, IWM_TE_DEP_OTHER, IWM_TE_DEP_TSF
 *      IWM_TE_EVENT_SOCIOPATHIC
 *      using IWM_TE_ABSENCE and using IWM_TE_NOTIF_*
 */
struct iwm_time_event_cmd {
        /* COMMON_INDEX_HDR_API_S_VER_1 */
        uint32_t id_and_color;
        uint32_t action;
        uint32_t id;
        /* IWM_MAC_TIME_EVENT_DATA_API_S_VER_2 */
        uint32_t apply_time;
        uint32_t max_delay;
        uint32_t depends_on;
        uint32_t interval;
        uint32_t duration;
        uint8_t repeat;
        uint8_t max_frags;
        uint16_t policy;
} __packed; /* IWM_MAC_TIME_EVENT_CMD_API_S_VER_2 */

/**
 * struct iwm_time_event_resp - response structure to iwm_time_event_cmd
 * @status: bit 0 indicates success, all others specify errors
 * @id: the Time Event type
 * @unique_id: the unique ID assigned (in ADD) or given (others) to the TE
 * @id_and_color: ID and color of the relevant MAC
 */
struct iwm_time_event_resp {
        uint32_t status;
        uint32_t id;
        uint32_t unique_id;
        uint32_t id_and_color;
} __packed; /* IWM_MAC_TIME_EVENT_RSP_API_S_VER_1 */

/**
 * struct iwm_time_event_notif - notifications of time event start/stop
 * ( IWM_TIME_EVENT_NOTIFICATION = 0x2a )
 * @timestamp: action timestamp in GP2
 * @session_id: session's unique id
 * @unique_id: unique id of the Time Event itself
 * @id_and_color: ID and color of the relevant MAC
 * @action: one of IWM_TE_NOTIF_START or IWM_TE_NOTIF_END
 * @status: true if scheduled, false otherwise (not executed)
 */
struct iwm_time_event_notif {
        uint32_t timestamp;
        uint32_t session_id;
        uint32_t unique_id;
        uint32_t id_and_color;
        uint32_t action;
        uint32_t status;
} __packed; /* IWM_MAC_TIME_EVENT_NTFY_API_S_VER_1 */


/* Bindings and Time Quota */

/**
 * struct iwm_binding_cmd - configuring bindings
 * ( IWM_BINDING_CONTEXT_CMD = 0x2b )
 * @id_and_color: ID and color of the relevant Binding
 * @action: action to perform, one of IWM_FW_CTXT_ACTION_*
 * @macs: array of MAC id and colors which belong to the binding
 * @phy: PHY id and color which belongs to the binding
 */
struct iwm_binding_cmd {
        /* COMMON_INDEX_HDR_API_S_VER_1 */
        uint32_t id_and_color;
        uint32_t action;
        /* IWM_BINDING_DATA_API_S_VER_1 */
        uint32_t macs[IWM_MAX_MACS_IN_BINDING];
        uint32_t phy;
} __packed; /* IWM_BINDING_CMD_API_S_VER_1 */

/* The maximal number of fragments in the FW's schedule session */
#define IWM_MVM_MAX_QUOTA 128

/**
 * struct iwm_time_quota_data - configuration of time quota per binding
 * @id_and_color: ID and color of the relevant Binding
 * @quota: absolute time quota in TU. The scheduler will try to divide the
 *      remainig quota (after Time Events) according to this quota.
 * @max_duration: max uninterrupted context duration in TU
 */
struct iwm_time_quota_data {
        uint32_t id_and_color;
        uint32_t quota;
        uint32_t max_duration;
} __packed; /* IWM_TIME_QUOTA_DATA_API_S_VER_1 */

/**
 * struct iwm_time_quota_cmd - configuration of time quota between bindings
 * ( IWM_TIME_QUOTA_CMD = 0x2c )
 * @quotas: allocations per binding
 */
struct iwm_time_quota_cmd {
        struct iwm_time_quota_data quotas[IWM_MAX_BINDINGS];
} __packed; /* IWM_TIME_QUOTA_ALLOCATION_CMD_API_S_VER_1 */


/* PHY context */

/* Supported bands */
#define IWM_PHY_BAND_5  (0)
#define IWM_PHY_BAND_24 (1)

/* Supported channel width, vary if there is VHT support */
#define IWM_PHY_VHT_CHANNEL_MODE20      (0x0)
#define IWM_PHY_VHT_CHANNEL_MODE40      (0x1)
#define IWM_PHY_VHT_CHANNEL_MODE80      (0x2)
#define IWM_PHY_VHT_CHANNEL_MODE160     (0x3)

/*
 * Control channel position:
 * For legacy set bit means upper channel, otherwise lower.
 * For VHT - bit-2 marks if the control is lower/upper relative to center-freq
 *   bits-1:0 mark the distance from the center freq. for 20Mhz, offset is 0.
 *                                   center_freq
 *                                        |
 * 40Mhz                          |_______|_______|
 * 80Mhz                  |_______|_______|_______|_______|
 * 160Mhz |_______|_______|_______|_______|_______|_______|_______|_______|
 * code      011     010     001     000  |  100     101     110    111
 */
#define IWM_PHY_VHT_CTRL_POS_1_BELOW  (0x0)
#define IWM_PHY_VHT_CTRL_POS_2_BELOW  (0x1)
#define IWM_PHY_VHT_CTRL_POS_3_BELOW  (0x2)
#define IWM_PHY_VHT_CTRL_POS_4_BELOW  (0x3)
#define IWM_PHY_VHT_CTRL_POS_1_ABOVE  (0x4)
#define IWM_PHY_VHT_CTRL_POS_2_ABOVE  (0x5)
#define IWM_PHY_VHT_CTRL_POS_3_ABOVE  (0x6)
#define IWM_PHY_VHT_CTRL_POS_4_ABOVE  (0x7)

/*
 * @band: IWM_PHY_BAND_*
 * @channel: channel number
 * @width: PHY_[VHT|LEGACY]_CHANNEL_*
 * @ctrl channel: PHY_[VHT|LEGACY]_CTRL_*
 */
struct iwm_fw_channel_info {
        uint8_t band;
        uint8_t channel;
        uint8_t width;
        uint8_t ctrl_pos;
} __packed;

#define IWM_PHY_RX_CHAIN_DRIVER_FORCE_POS       (0)
#define IWM_PHY_RX_CHAIN_DRIVER_FORCE_MSK \
        (0x1 << IWM_PHY_RX_CHAIN_DRIVER_FORCE_POS)
#define IWM_PHY_RX_CHAIN_VALID_POS              (1)
#define IWM_PHY_RX_CHAIN_VALID_MSK \
        (0x7 << IWM_PHY_RX_CHAIN_VALID_POS)
#define IWM_PHY_RX_CHAIN_FORCE_SEL_POS  (4)
#define IWM_PHY_RX_CHAIN_FORCE_SEL_MSK \
        (0x7 << IWM_PHY_RX_CHAIN_FORCE_SEL_POS)
#define IWM_PHY_RX_CHAIN_FORCE_MIMO_SEL_POS     (7)
#define IWM_PHY_RX_CHAIN_FORCE_MIMO_SEL_MSK \
        (0x7 << IWM_PHY_RX_CHAIN_FORCE_MIMO_SEL_POS)
#define IWM_PHY_RX_CHAIN_CNT_POS                (10)
#define IWM_PHY_RX_CHAIN_CNT_MSK \
        (0x3 << IWM_PHY_RX_CHAIN_CNT_POS)
#define IWM_PHY_RX_CHAIN_MIMO_CNT_POS   (12)
#define IWM_PHY_RX_CHAIN_MIMO_CNT_MSK \
        (0x3 << IWM_PHY_RX_CHAIN_MIMO_CNT_POS)
#define IWM_PHY_RX_CHAIN_MIMO_FORCE_POS (14)
#define IWM_PHY_RX_CHAIN_MIMO_FORCE_MSK \
        (0x1 << IWM_PHY_RX_CHAIN_MIMO_FORCE_POS)

/* TODO: fix the value, make it depend on firmware at runtime? */
#define IWM_NUM_PHY_CTX 3

/* TODO: complete missing documentation */
/**
 * struct iwm_phy_context_cmd - config of the PHY context
 * ( IWM_PHY_CONTEXT_CMD = 0x8 )
 * @id_and_color: ID and color of the relevant Binding
 * @action: action to perform, one of IWM_FW_CTXT_ACTION_*
 * @apply_time: 0 means immediate apply and context switch.
 *      other value means apply new params after X usecs
 * @tx_param_color: ???
 * @channel_info:
 * @txchain_info: ???
 * @rxchain_info: ???
 * @acquisition_data: ???
 * @dsp_cfg_flags: set to 0
 */
struct iwm_phy_context_cmd {
        /* COMMON_INDEX_HDR_API_S_VER_1 */
        uint32_t id_and_color;
        uint32_t action;
        /* IWM_PHY_CONTEXT_DATA_API_S_VER_1 */
        uint32_t apply_time;
        uint32_t tx_param_color;
        struct iwm_fw_channel_info ci;
        uint32_t txchain_info;
        uint32_t rxchain_info;
        uint32_t acquisition_data;
        uint32_t dsp_cfg_flags;
} __packed; /* IWM_PHY_CONTEXT_CMD_API_VER_1 */

#define IWM_RX_INFO_PHY_CNT 8
#define IWM_RX_INFO_ENERGY_ANT_ABC_IDX 1
#define IWM_RX_INFO_ENERGY_ANT_A_MSK 0x000000ff
#define IWM_RX_INFO_ENERGY_ANT_B_MSK 0x0000ff00
#define IWM_RX_INFO_ENERGY_ANT_C_MSK 0x00ff0000
#define IWM_RX_INFO_ENERGY_ANT_A_POS 0
#define IWM_RX_INFO_ENERGY_ANT_B_POS 8
#define IWM_RX_INFO_ENERGY_ANT_C_POS 16

#define IWM_RX_INFO_AGC_IDX 1
#define IWM_RX_INFO_RSSI_AB_IDX 2
#define IWM_OFDM_AGC_A_MSK 0x0000007f
#define IWM_OFDM_AGC_A_POS 0
#define IWM_OFDM_AGC_B_MSK 0x00003f80
#define IWM_OFDM_AGC_B_POS 7
#define IWM_OFDM_AGC_CODE_MSK 0x3fe00000
#define IWM_OFDM_AGC_CODE_POS 20
#define IWM_OFDM_RSSI_INBAND_A_MSK 0x00ff
#define IWM_OFDM_RSSI_A_POS 0
#define IWM_OFDM_RSSI_ALLBAND_A_MSK 0xff00
#define IWM_OFDM_RSSI_ALLBAND_A_POS 8
#define IWM_OFDM_RSSI_INBAND_B_MSK 0xff0000
#define IWM_OFDM_RSSI_B_POS 16
#define IWM_OFDM_RSSI_ALLBAND_B_MSK 0xff000000
#define IWM_OFDM_RSSI_ALLBAND_B_POS 24

/**
 * struct iwm_rx_phy_info - phy info
 * (IWM_REPLY_RX_PHY_CMD = 0xc0)
 * @non_cfg_phy_cnt: non configurable DSP phy data byte count
 * @cfg_phy_cnt: configurable DSP phy data byte count
 * @stat_id: configurable DSP phy data set ID
 * @reserved1:
 * @system_timestamp: GP2  at on air rise
 * @timestamp: TSF at on air rise
 * @beacon_time_stamp: beacon at on-air rise
 * @phy_flags: general phy flags: band, modulation, ...
 * @channel: channel number
 * @non_cfg_phy_buf: for various implementations of non_cfg_phy
 * @rate_n_flags: IWM_RATE_MCS_*
 * @byte_count: frame's byte-count
 * @frame_time: frame's time on the air, based on byte count and frame rate
 *      calculation
 * @mac_active_msk: what MACs were active when the frame was received
 *
 * Before each Rx, the device sends this data. It contains PHY information
 * about the reception of the packet.
 */
struct iwm_rx_phy_info {
        uint8_t non_cfg_phy_cnt;
        uint8_t cfg_phy_cnt;
        uint8_t stat_id;
        uint8_t reserved1;
        uint32_t system_timestamp;
        uint64_t timestamp;
        uint32_t beacon_time_stamp;
        uint16_t phy_flags;
#define IWM_PHY_INFO_FLAG_SHPREAMBLE    (1 << 2)
        uint16_t channel;
        uint32_t non_cfg_phy[IWM_RX_INFO_PHY_CNT];
        uint8_t rate;
        uint8_t rflags;
        uint16_t xrflags;
        uint32_t byte_count;
        uint16_t mac_active_msk;
        uint16_t frame_time;
} __packed;

struct iwm_rx_mpdu_res_start {
        uint16_t byte_count;
        uint16_t reserved;
} __packed;

/**
 * enum iwm_rx_phy_flags - to parse %iwm_rx_phy_info phy_flags
 * @IWM_RX_RES_PHY_FLAGS_BAND_24: true if the packet was received on 2.4 band
 * @IWM_RX_RES_PHY_FLAGS_MOD_CCK:
 * @IWM_RX_RES_PHY_FLAGS_SHORT_PREAMBLE: true if packet's preamble was short
 * @IWM_RX_RES_PHY_FLAGS_NARROW_BAND:
 * @IWM_RX_RES_PHY_FLAGS_ANTENNA: antenna on which the packet was received
 * @IWM_RX_RES_PHY_FLAGS_AGG: set if the packet was part of an A-MPDU
 * @IWM_RX_RES_PHY_FLAGS_OFDM_HT: The frame was an HT frame
 * @IWM_RX_RES_PHY_FLAGS_OFDM_GF: The frame used GF preamble
 * @IWM_RX_RES_PHY_FLAGS_OFDM_VHT: The frame was a VHT frame
 */
enum iwm_rx_phy_flags {
        IWM_RX_RES_PHY_FLAGS_BAND_24            = (1 << 0),
        IWM_RX_RES_PHY_FLAGS_MOD_CCK            = (1 << 1),
        IWM_RX_RES_PHY_FLAGS_SHORT_PREAMBLE     = (1 << 2),
        IWM_RX_RES_PHY_FLAGS_NARROW_BAND        = (1 << 3),
        IWM_RX_RES_PHY_FLAGS_ANTENNA            = (0x7 << 4),
        IWM_RX_RES_PHY_FLAGS_ANTENNA_POS        = 4,
        IWM_RX_RES_PHY_FLAGS_AGG                = (1 << 7),
        IWM_RX_RES_PHY_FLAGS_OFDM_HT            = (1 << 8),
        IWM_RX_RES_PHY_FLAGS_OFDM_GF            = (1 << 9),
        IWM_RX_RES_PHY_FLAGS_OFDM_VHT           = (1 << 10),
};

/**
 * enum iwm_mvm_rx_status - written by fw for each Rx packet
 * @IWM_RX_MPDU_RES_STATUS_CRC_OK: CRC is fine
 * @IWM_RX_MPDU_RES_STATUS_OVERRUN_OK: there was no RXE overflow
 * @IWM_RX_MPDU_RES_STATUS_SRC_STA_FOUND:
 * @IWM_RX_MPDU_RES_STATUS_KEY_VALID:
 * @IWM_RX_MPDU_RES_STATUS_KEY_PARAM_OK:
 * @IWM_RX_MPDU_RES_STATUS_ICV_OK: ICV is fine, if not, the packet is destroyed
 * @IWM_RX_MPDU_RES_STATUS_MIC_OK: used for CCM alg only. TKIP MIC is checked
 *      in the driver.
 * @IWM_RX_MPDU_RES_STATUS_TTAK_OK: TTAK is fine
 * @IWM_RX_MPDU_RES_STATUS_MNG_FRAME_REPLAY_ERR:  valid for alg = CCM_CMAC or
 *      alg = CCM only. Checks replay attack for 11w frames. Relevant only if
 *      %IWM_RX_MPDU_RES_STATUS_ROBUST_MNG_FRAME is set.
 * @IWM_RX_MPDU_RES_STATUS_SEC_NO_ENC: this frame is not encrypted
 * @IWM_RX_MPDU_RES_STATUS_SEC_WEP_ENC: this frame is encrypted using WEP
 * @IWM_RX_MPDU_RES_STATUS_SEC_CCM_ENC: this frame is encrypted using CCM
 * @IWM_RX_MPDU_RES_STATUS_SEC_TKIP_ENC: this frame is encrypted using TKIP
 * @IWM_RX_MPDU_RES_STATUS_SEC_CCM_CMAC_ENC: this frame is encrypted using CCM_CMAC
 * @IWM_RX_MPDU_RES_STATUS_SEC_ENC_ERR: this frame couldn't be decrypted
 * @IWM_RX_MPDU_RES_STATUS_SEC_ENC_MSK: bitmask of the encryption algorithm
 * @IWM_RX_MPDU_RES_STATUS_DEC_DONE: this frame has been successfully decrypted
 * @IWM_RX_MPDU_RES_STATUS_PROTECT_FRAME_BIT_CMP:
 * @IWM_RX_MPDU_RES_STATUS_EXT_IV_BIT_CMP:
 * @IWM_RX_MPDU_RES_STATUS_KEY_ID_CMP_BIT:
 * @IWM_RX_MPDU_RES_STATUS_ROBUST_MNG_FRAME: this frame is an 11w management frame
 * @IWM_RX_MPDU_RES_STATUS_HASH_INDEX_MSK:
 * @IWM_RX_MPDU_RES_STATUS_STA_ID_MSK:
 * @IWM_RX_MPDU_RES_STATUS_RRF_KILL:
 * @IWM_RX_MPDU_RES_STATUS_FILTERING_MSK:
 * @IWM_RX_MPDU_RES_STATUS2_FILTERING_MSK:
 */
enum iwm_mvm_rx_status {
        IWM_RX_MPDU_RES_STATUS_CRC_OK                   = (1 << 0),
        IWM_RX_MPDU_RES_STATUS_OVERRUN_OK               = (1 << 1),
        IWM_RX_MPDU_RES_STATUS_SRC_STA_FOUND            = (1 << 2),
        IWM_RX_MPDU_RES_STATUS_KEY_VALID                = (1 << 3),
        IWM_RX_MPDU_RES_STATUS_KEY_PARAM_OK             = (1 << 4),
        IWM_RX_MPDU_RES_STATUS_ICV_OK                   = (1 << 5),
        IWM_RX_MPDU_RES_STATUS_MIC_OK                   = (1 << 6),
        IWM_RX_MPDU_RES_STATUS_TTAK_OK                  = (1 << 7),
        IWM_RX_MPDU_RES_STATUS_MNG_FRAME_REPLAY_ERR     = (1 << 7),
        IWM_RX_MPDU_RES_STATUS_SEC_NO_ENC               = (0 << 8),
        IWM_RX_MPDU_RES_STATUS_SEC_WEP_ENC              = (1 << 8),
        IWM_RX_MPDU_RES_STATUS_SEC_CCM_ENC              = (2 << 8),
        IWM_RX_MPDU_RES_STATUS_SEC_TKIP_ENC             = (3 << 8),
        IWM_RX_MPDU_RES_STATUS_SEC_EXT_ENC              = (4 << 8),
        IWM_RX_MPDU_RES_STATUS_SEC_CCM_CMAC_ENC         = (6 << 8),
        IWM_RX_MPDU_RES_STATUS_SEC_ENC_ERR              = (7 << 8),
        IWM_RX_MPDU_RES_STATUS_SEC_ENC_MSK              = (7 << 8),
        IWM_RX_MPDU_RES_STATUS_DEC_DONE                 = (1 << 11),
        IWM_RX_MPDU_RES_STATUS_PROTECT_FRAME_BIT_CMP    = (1 << 12),
        IWM_RX_MPDU_RES_STATUS_EXT_IV_BIT_CMP           = (1 << 13),
        IWM_RX_MPDU_RES_STATUS_KEY_ID_CMP_BIT           = (1 << 14),
        IWM_RX_MPDU_RES_STATUS_ROBUST_MNG_FRAME         = (1 << 15),
        IWM_RX_MPDU_RES_STATUS_HASH_INDEX_MSK           = (0x3F0000),
        IWM_RX_MPDU_RES_STATUS_STA_ID_MSK               = (0x1f000000),
        IWM_RX_MPDU_RES_STATUS_RRF_KILL                 = (1 << 29),
        IWM_RX_MPDU_RES_STATUS_FILTERING_MSK            = (0xc00000),
        IWM_RX_MPDU_RES_STATUS2_FILTERING_MSK           = (0xc0000000),
};

/**
 * struct iwm_radio_version_notif - information on the radio version
 * ( IWM_RADIO_VERSION_NOTIFICATION = 0x68 )
 * @radio_flavor:
 * @radio_step:
 * @radio_dash:
 */
struct iwm_radio_version_notif {
        uint32_t radio_flavor;
        uint32_t radio_step;
        uint32_t radio_dash;
} __packed; /* IWM_RADIO_VERSION_NOTOFICATION_S_VER_1 */

enum iwm_card_state_flags {
        IWM_CARD_ENABLED                = 0x00,
        IWM_HW_CARD_DISABLED    = 0x01,
        IWM_SW_CARD_DISABLED    = 0x02,
        IWM_CT_KILL_CARD_DISABLED       = 0x04,
        IWM_HALT_CARD_DISABLED  = 0x08,
        IWM_CARD_DISABLED_MSK   = 0x0f,
        IWM_CARD_IS_RX_ON               = 0x10,
};

/**
 * struct iwm_radio_version_notif - information on the radio version
 * (IWM_CARD_STATE_NOTIFICATION = 0xa1 )
 * @flags: %iwm_card_state_flags
 */
struct iwm_card_state_notif {
        uint32_t flags;
} __packed; /* CARD_STATE_NTFY_API_S_VER_1 */

/**
 * struct iwm_missed_beacons_notif - information on missed beacons
 * ( IWM_MISSED_BEACONS_NOTIFICATION = 0xa2 )
 * @mac_id: interface ID
 * @consec_missed_beacons_since_last_rx: number of consecutive missed
 *      beacons since last RX.
 * @consec_missed_beacons: number of consecutive missed beacons
 * @num_expected_beacons:
 * @num_recvd_beacons:
 */
struct iwm_missed_beacons_notif {
        uint32_t mac_id;
        uint32_t consec_missed_beacons_since_last_rx;
        uint32_t consec_missed_beacons;
        uint32_t num_expected_beacons;
        uint32_t num_recvd_beacons;
} __packed; /* IWM_MISSED_BEACON_NTFY_API_S_VER_3 */

/**
 * struct iwm_mfuart_load_notif - mfuart image version & status
 * ( IWM_MFUART_LOAD_NOTIFICATION = 0xb1 )
 * @installed_ver: installed image version
 * @external_ver: external image version
 * @status: MFUART loading status
 * @duration: MFUART loading time
*/
struct iwm_mfuart_load_notif {
        uint32_t installed_ver;
        uint32_t external_ver;
        uint32_t status;
        uint32_t duration;
} __packed; /*MFU_LOADER_NTFY_API_S_VER_1*/

/**
 * struct iwm_set_calib_default_cmd - set default value for calibration.
 * ( IWM_SET_CALIB_DEFAULT_CMD = 0x8e )
 * @calib_index: the calibration to set value for
 * @length: of data
 * @data: the value to set for the calibration result
 */
struct iwm_set_calib_default_cmd {
        uint16_t calib_index;
        uint16_t length;
        uint8_t data[0];
} __packed; /* IWM_PHY_CALIB_OVERRIDE_VALUES_S */

#define IWM_MAX_PORT_ID_NUM     2
#define IWM_MAX_MCAST_FILTERING_ADDRESSES 256

/**
 * struct iwm_mcast_filter_cmd - configure multicast filter.
 * @filter_own: Set 1 to filter out multicast packets sent by station itself
 * @port_id:    Multicast MAC addresses array specifier. This is a strange way
 *              to identify network interface adopted in host-device IF.
 *              It is used by FW as index in array of addresses. This array has
 *              IWM_MAX_PORT_ID_NUM members.
 * @count:      Number of MAC addresses in the array
 * @pass_all:   Set 1 to pass all multicast packets.
 * @bssid:      current association BSSID.
 * @addr_list:  Place holder for array of MAC addresses.
 *              IMPORTANT: add padding if necessary to ensure DWORD alignment.
 */
struct iwm_mcast_filter_cmd {
        uint8_t filter_own;
        uint8_t port_id;
        uint8_t count;
        uint8_t pass_all;
        uint8_t bssid[6];
        uint8_t reserved[2];
        uint8_t addr_list[0];
} __packed; /* IWM_MCAST_FILTERING_CMD_API_S_VER_1 */

/*
 * The first MAC indices (starting from 0)
 * are available to the driver, AUX follows
 */
#define IWM_MAC_INDEX_AUX               4
#define IWM_MAC_INDEX_MIN_DRIVER        0
#define IWM_NUM_MAC_INDEX_DRIVER        IWM_MAC_INDEX_AUX
#define IWM_NUM_MAC_INDEX               (IWM_MAC_INDEX_AUX + 1)

/***********************************
 * Statistics API
 ***********************************/
struct iwm_mvm_statistics_dbg {
        uint32_t burst_check;
        uint32_t burst_count;
        uint32_t wait_for_silence_timeout_cnt;
        uint32_t reserved[3];
} __packed; /* IWM_STATISTICS_DEBUG_API_S_VER_2 */

struct iwm_mvm_statistics_div {
        uint32_t tx_on_a;
        uint32_t tx_on_b;
        uint32_t exec_time;
        uint32_t probe_time;
        uint32_t rssi_ant;
        uint32_t reserved2;
} __packed; /* IWM_STATISTICS_SLOW_DIV_API_S_VER_2 */

struct iwm_mvm_statistics_rx_non_phy {
        uint32_t bogus_cts;     /* CTS received when not expecting CTS */
        uint32_t bogus_ack;     /* ACK received when not expecting ACK */
        uint32_t non_bssid_frames;      /* number of frames with BSSID that
                                         * doesn't belong to the STA BSSID */
        uint32_t filtered_frames;       /* count frames that were dumped in the
                                 * filtering process */
        uint32_t non_channel_beacons;   /* beacons with our bss id but not on
                                         * our serving channel */
        uint32_t channel_beacons;       /* beacons with our bss id and in our
                                 * serving channel */
        uint32_t num_missed_bcon;       /* number of missed beacons */
        uint32_t adc_rx_saturation_time;        /* count in 0.8us units the time the
                                         * ADC was in saturation */
        uint32_t ina_detection_search_time;/* total time (in 0.8us) searched
                                          * for INA */
        uint32_t beacon_silence_rssi[3];/* RSSI silence after beacon frame */
        uint32_t interference_data_flag;        /* flag for interference data
                                         * availability. 1 when data is
                                         * available. */
        uint32_t channel_load;          /* counts RX Enable time in uSec */
        uint32_t dsp_false_alarms;      /* DSP false alarm (both OFDM
                                         * and CCK) counter */
        uint32_t beacon_rssi_a;
        uint32_t beacon_rssi_b;
        uint32_t beacon_rssi_c;
        uint32_t beacon_energy_a;
        uint32_t beacon_energy_b;
        uint32_t beacon_energy_c;
        uint32_t num_bt_kills;
        uint32_t mac_id;
        uint32_t directed_data_mpdu;
} __packed; /* IWM_STATISTICS_RX_NON_PHY_API_S_VER_3 */

struct iwm_mvm_statistics_rx_phy {
        uint32_t ina_cnt;
        uint32_t fina_cnt;
        uint32_t plcp_err;
        uint32_t crc32_err;
        uint32_t overrun_err;
        uint32_t early_overrun_err;
        uint32_t crc32_good;
        uint32_t false_alarm_cnt;
        uint32_t fina_sync_err_cnt;
        uint32_t sfd_timeout;
        uint32_t fina_timeout;
        uint32_t unresponded_rts;
        uint32_t rxe_frame_limit_overrun;
        uint32_t sent_ack_cnt;
        uint32_t sent_cts_cnt;
        uint32_t sent_ba_rsp_cnt;
        uint32_t dsp_self_kill;
        uint32_t mh_format_err;
        uint32_t re_acq_main_rssi_sum;
        uint32_t reserved;
} __packed; /* IWM_STATISTICS_RX_PHY_API_S_VER_2 */

struct iwm_mvm_statistics_rx_ht_phy {
        uint32_t plcp_err;
        uint32_t overrun_err;
        uint32_t early_overrun_err;
        uint32_t crc32_good;
        uint32_t crc32_err;
        uint32_t mh_format_err;
        uint32_t agg_crc32_good;
        uint32_t agg_mpdu_cnt;
        uint32_t agg_cnt;
        uint32_t unsupport_mcs;
} __packed;  /* IWM_STATISTICS_HT_RX_PHY_API_S_VER_1 */

struct iwm_mvm_statistics_tx_non_phy {
        uint32_t preamble_cnt;
        uint32_t rx_detected_cnt;
        uint32_t bt_prio_defer_cnt;
        uint32_t bt_prio_kill_cnt;
        uint32_t few_bytes_cnt;
        uint32_t cts_timeout;
        uint32_t ack_timeout;
        uint32_t expected_ack_cnt;
        uint32_t actual_ack_cnt;
        uint32_t dump_msdu_cnt;
        uint32_t burst_abort_next_frame_mismatch_cnt;
        uint32_t burst_abort_missing_next_frame_cnt;
        uint32_t cts_timeout_collision;
        uint32_t ack_or_ba_timeout_collision;
} __packed; /* IWM_STATISTICS_TX_NON_PHY_API_S_VER_3 */

#define IWM_MAX_CHAINS 3

struct iwm_mvm_statistics_tx_non_phy_agg {
        uint32_t ba_timeout;
        uint32_t ba_reschedule_frames;
        uint32_t scd_query_agg_frame_cnt;
        uint32_t scd_query_no_agg;
        uint32_t scd_query_agg;
        uint32_t scd_query_mismatch;
        uint32_t frame_not_ready;
        uint32_t underrun;
        uint32_t bt_prio_kill;
        uint32_t rx_ba_rsp_cnt;
        int8_t txpower[IWM_MAX_CHAINS];
        int8_t reserved;
        uint32_t reserved2;
} __packed; /* IWM_STATISTICS_TX_NON_PHY_AGG_API_S_VER_1 */

struct iwm_mvm_statistics_tx_channel_width {
        uint32_t ext_cca_narrow_ch20[1];
        uint32_t ext_cca_narrow_ch40[2];
        uint32_t ext_cca_narrow_ch80[3];
        uint32_t ext_cca_narrow_ch160[4];
        uint32_t last_tx_ch_width_indx;
        uint32_t rx_detected_per_ch_width[4];
        uint32_t success_per_ch_width[4];
        uint32_t fail_per_ch_width[4];
}; /* IWM_STATISTICS_TX_CHANNEL_WIDTH_API_S_VER_1 */

struct iwm_mvm_statistics_tx {
        struct iwm_mvm_statistics_tx_non_phy general;
        struct iwm_mvm_statistics_tx_non_phy_agg agg;
        struct iwm_mvm_statistics_tx_channel_width channel_width;
} __packed; /* IWM_STATISTICS_TX_API_S_VER_4 */


struct iwm_mvm_statistics_bt_activity {
        uint32_t hi_priority_tx_req_cnt;
        uint32_t hi_priority_tx_denied_cnt;
        uint32_t lo_priority_tx_req_cnt;
        uint32_t lo_priority_tx_denied_cnt;
        uint32_t hi_priority_rx_req_cnt;
        uint32_t hi_priority_rx_denied_cnt;
        uint32_t lo_priority_rx_req_cnt;
        uint32_t lo_priority_rx_denied_cnt;
} __packed;  /* IWM_STATISTICS_BT_ACTIVITY_API_S_VER_1 */

struct iwm_mvm_statistics_general_v8 {
        uint32_t radio_temperature;
        uint32_t radio_voltage;
        struct iwm_mvm_statistics_dbg dbg;
        uint32_t sleep_time;
        uint32_t slots_out;
        uint32_t slots_idle;
        uint32_t ttl_timestamp;
        struct iwm_mvm_statistics_div slow_div;
        uint32_t rx_enable_counter;
        /*
         * num_of_sos_states:
         *  count the number of times we have to re-tune
         *  in order to get out of bad PHY status
         */
        uint32_t num_of_sos_states;
        uint32_t beacon_filtered;
        uint32_t missed_beacons;
        uint8_t beacon_filter_average_energy;
        uint8_t beacon_filter_reason;
        uint8_t beacon_filter_current_energy;
        uint8_t beacon_filter_reserved;
        uint32_t beacon_filter_delta_time;
        struct iwm_mvm_statistics_bt_activity bt_activity;
        uint64_t rx_time;
        uint64_t on_time_rf;
        uint64_t on_time_scan;
        uint64_t tx_time;
        uint32_t beacon_counter[IWM_NUM_MAC_INDEX];
        uint8_t beacon_average_energy[IWM_NUM_MAC_INDEX];
        uint8_t reserved[4 - (IWM_NUM_MAC_INDEX % 4)];
} __packed; /* IWM_STATISTICS_GENERAL_API_S_VER_8 */

struct iwm_mvm_statistics_rx {
        struct iwm_mvm_statistics_rx_phy ofdm;
        struct iwm_mvm_statistics_rx_phy cck;
        struct iwm_mvm_statistics_rx_non_phy general;
        struct iwm_mvm_statistics_rx_ht_phy ofdm_ht;
} __packed; /* IWM_STATISTICS_RX_API_S_VER_3 */

/*
 * IWM_STATISTICS_NOTIFICATION = 0x9d (notification only, not a command)
 *
 * By default, uCode issues this notification after receiving a beacon
 * while associated.  To disable this behavior, set DISABLE_NOTIF flag in the
 * IWM_STATISTICS_CMD (0x9c), below.
 */

struct iwm_notif_statistics_v10 {
        uint32_t flag;
        struct iwm_mvm_statistics_rx rx;
        struct iwm_mvm_statistics_tx tx;
        struct iwm_mvm_statistics_general_v8 general;
} __packed; /* IWM_STATISTICS_NTFY_API_S_VER_10 */

#define IWM_STATISTICS_FLG_CLEAR                0x1
#define IWM_STATISTICS_FLG_DISABLE_NOTIF        0x2

struct iwm_statistics_cmd {
        uint32_t flags;
} __packed; /* IWM_STATISTICS_CMD_API_S_VER_1 */

/***********************************
 * Smart Fifo API
 ***********************************/
/* Smart Fifo state */
enum iwm_sf_state {
        IWM_SF_LONG_DELAY_ON = 0, /* should never be called by driver */
        IWM_SF_FULL_ON,
        IWM_SF_UNINIT,
        IWM_SF_INIT_OFF,
        IWM_SF_HW_NUM_STATES
};

/* Smart Fifo possible scenario */
enum iwm_sf_scenario {
        IWM_SF_SCENARIO_SINGLE_UNICAST,
        IWM_SF_SCENARIO_AGG_UNICAST,
        IWM_SF_SCENARIO_MULTICAST,
        IWM_SF_SCENARIO_BA_RESP,
        IWM_SF_SCENARIO_TX_RESP,
        IWM_SF_NUM_SCENARIO
};

#define IWM_SF_TRANSIENT_STATES_NUMBER 2 /* IWM_SF_LONG_DELAY_ON and IWM_SF_FULL_ON */
#define IWM_SF_NUM_TIMEOUT_TYPES 2      /* Aging timer and Idle timer */

/* smart FIFO default values */
#define IWM_SF_W_MARK_SISO 4096
#define IWM_SF_W_MARK_MIMO2 8192
#define IWM_SF_W_MARK_MIMO3 6144
#define IWM_SF_W_MARK_LEGACY 4096
#define IWM_SF_W_MARK_SCAN 4096

/* SF Scenarios timers for default configuration (aligned to 32 uSec) */
#define IWM_SF_SINGLE_UNICAST_IDLE_TIMER_DEF 160        /* 150 uSec  */
#define IWM_SF_SINGLE_UNICAST_AGING_TIMER_DEF 400       /* 0.4 mSec */
#define IWM_SF_AGG_UNICAST_IDLE_TIMER_DEF 160           /* 150 uSec */
#define IWM_SF_AGG_UNICAST_AGING_TIMER_DEF 400          /* 0.4 mSec */
#define IWM_SF_MCAST_IDLE_TIMER_DEF 160                 /* 150 uSec */
#define IWM_SF_MCAST_AGING_TIMER_DEF 400                /* 0.4 mSec */
#define IWM_SF_BA_IDLE_TIMER_DEF 160                    /* 150 uSec */
#define IWM_SF_BA_AGING_TIMER_DEF 400                   /* 0.4 mSec */
#define IWM_SF_TX_RE_IDLE_TIMER_DEF 160                 /* 150 uSec */
#define IWM_SF_TX_RE_AGING_TIMER_DEF 400                /* 0.4 mSec */

/* SF Scenarios timers for FULL_ON state (aligned to 32 uSec) */
#define IWM_SF_SINGLE_UNICAST_IDLE_TIMER 320    /* 300 uSec  */
#define IWM_SF_SINGLE_UNICAST_AGING_TIMER 2016  /* 2 mSec */
#define IWM_SF_AGG_UNICAST_IDLE_TIMER 320       /* 300 uSec */
#define IWM_SF_AGG_UNICAST_AGING_TIMER 2016     /* 2 mSec */
#define IWM_SF_MCAST_IDLE_TIMER 2016            /* 2 mSec */
#define IWM_SF_MCAST_AGING_TIMER 10016          /* 10 mSec */
#define IWM_SF_BA_IDLE_TIMER 320                /* 300 uSec */
#define IWM_SF_BA_AGING_TIMER 2016              /* 2 mSec */
#define IWM_SF_TX_RE_IDLE_TIMER 320             /* 300 uSec */
#define IWM_SF_TX_RE_AGING_TIMER 2016           /* 2 mSec */

#define IWM_SF_LONG_DELAY_AGING_TIMER 1000000   /* 1 Sec */

#define IWM_SF_CFG_DUMMY_NOTIF_OFF      (1 << 16)

/**
 * Smart Fifo configuration command.
 * @state: smart fifo state, types listed in iwm_sf_state.
 * @watermark: Minimum allowed available free space in RXF for transient state.
 * @long_delay_timeouts: aging and idle timer values for each scenario
 * in long delay state.
 * @full_on_timeouts: timer values for each scenario in full on state.
 */
struct iwm_sf_cfg_cmd {
        uint32_t state;
        uint32_t watermark[IWM_SF_TRANSIENT_STATES_NUMBER];
        uint32_t long_delay_timeouts[IWM_SF_NUM_SCENARIO][IWM_SF_NUM_TIMEOUT_TYPES];
        uint32_t full_on_timeouts[IWM_SF_NUM_SCENARIO][IWM_SF_NUM_TIMEOUT_TYPES];
} __packed; /* IWM_SF_CFG_API_S_VER_2 */

/*
 * END mvm/fw-api.h
 */

/*
 * BEGIN mvm/fw-api-mac.h
 */

enum iwm_ac {
        IWM_AC_BK,
        IWM_AC_BE,
        IWM_AC_VI,
        IWM_AC_VO,
        IWM_AC_NUM,
};

/**
 * enum iwm_mac_protection_flags - MAC context flags
 * @IWM_MAC_PROT_FLG_TGG_PROTECT: 11g protection when transmitting OFDM frames,
 *      this will require CCK RTS/CTS2self.
 *      RTS/CTS will protect full burst time.
 * @IWM_MAC_PROT_FLG_HT_PROT: enable HT protection
 * @IWM_MAC_PROT_FLG_FAT_PROT: protect 40 MHz transmissions
 * @IWM_MAC_PROT_FLG_SELF_CTS_EN: allow CTS2self
 */
enum iwm_mac_protection_flags {
        IWM_MAC_PROT_FLG_TGG_PROTECT    = (1 << 3),
        IWM_MAC_PROT_FLG_HT_PROT                = (1 << 23),
        IWM_MAC_PROT_FLG_FAT_PROT               = (1 << 24),
        IWM_MAC_PROT_FLG_SELF_CTS_EN    = (1 << 30),
};

#define IWM_MAC_FLG_SHORT_SLOT          (1 << 4)
#define IWM_MAC_FLG_SHORT_PREAMBLE              (1 << 5)

/**
 * enum iwm_mac_types - Supported MAC types
 * @IWM_FW_MAC_TYPE_FIRST: lowest supported MAC type
 * @IWM_FW_MAC_TYPE_AUX: Auxiliary MAC (internal)
 * @IWM_FW_MAC_TYPE_LISTENER: monitor MAC type (?)
 * @IWM_FW_MAC_TYPE_PIBSS: Pseudo-IBSS
 * @IWM_FW_MAC_TYPE_IBSS: IBSS
 * @IWM_FW_MAC_TYPE_BSS_STA: BSS (managed) station
 * @IWM_FW_MAC_TYPE_P2P_DEVICE: P2P Device
 * @IWM_FW_MAC_TYPE_P2P_STA: P2P client
 * @IWM_FW_MAC_TYPE_GO: P2P GO
 * @IWM_FW_MAC_TYPE_TEST: ?
 * @IWM_FW_MAC_TYPE_MAX: highest support MAC type
 */
enum iwm_mac_types {
        IWM_FW_MAC_TYPE_FIRST = 1,
        IWM_FW_MAC_TYPE_AUX = IWM_FW_MAC_TYPE_FIRST,
        IWM_FW_MAC_TYPE_LISTENER,
        IWM_FW_MAC_TYPE_PIBSS,
        IWM_FW_MAC_TYPE_IBSS,
        IWM_FW_MAC_TYPE_BSS_STA,
        IWM_FW_MAC_TYPE_P2P_DEVICE,
        IWM_FW_MAC_TYPE_P2P_STA,
        IWM_FW_MAC_TYPE_GO,
        IWM_FW_MAC_TYPE_TEST,
        IWM_FW_MAC_TYPE_MAX = IWM_FW_MAC_TYPE_TEST
}; /* IWM_MAC_CONTEXT_TYPE_API_E_VER_1 */

/**
 * enum iwm_tsf_id - TSF hw timer ID
 * @IWM_TSF_ID_A: use TSF A
 * @IWM_TSF_ID_B: use TSF B
 * @IWM_TSF_ID_C: use TSF C
 * @IWM_TSF_ID_D: use TSF D
 * @IWM_NUM_TSF_IDS: number of TSF timers available
 */
enum iwm_tsf_id {
        IWM_TSF_ID_A = 0,
        IWM_TSF_ID_B = 1,
        IWM_TSF_ID_C = 2,
        IWM_TSF_ID_D = 3,
        IWM_NUM_TSF_IDS = 4,
}; /* IWM_TSF_ID_API_E_VER_1 */

/**
 * struct iwm_mac_data_ap - configuration data for AP MAC context
 * @beacon_time: beacon transmit time in system time
 * @beacon_tsf: beacon transmit time in TSF
 * @bi: beacon interval in TU
 * @bi_reciprocal: 2^32 / bi
 * @dtim_interval: dtim transmit time in TU
 * @dtim_reciprocal: 2^32 / dtim_interval
 * @mcast_qid: queue ID for multicast traffic
 * @beacon_template: beacon template ID
 */
struct iwm_mac_data_ap {
        uint32_t beacon_time;
        uint64_t beacon_tsf;
        uint32_t bi;
        uint32_t bi_reciprocal;
        uint32_t dtim_interval;
        uint32_t dtim_reciprocal;
        uint32_t mcast_qid;
        uint32_t beacon_template;
} __packed; /* AP_MAC_DATA_API_S_VER_1 */

/**
 * struct iwm_mac_data_ibss - configuration data for IBSS MAC context
 * @beacon_time: beacon transmit time in system time
 * @beacon_tsf: beacon transmit time in TSF
 * @bi: beacon interval in TU
 * @bi_reciprocal: 2^32 / bi
 * @beacon_template: beacon template ID
 */
struct iwm_mac_data_ibss {
        uint32_t beacon_time;
        uint64_t beacon_tsf;
        uint32_t bi;
        uint32_t bi_reciprocal;
        uint32_t beacon_template;
} __packed; /* IBSS_MAC_DATA_API_S_VER_1 */

/**
 * struct iwm_mac_data_sta - configuration data for station MAC context
 * @is_assoc: 1 for associated state, 0 otherwise
 * @dtim_time: DTIM arrival time in system time
 * @dtim_tsf: DTIM arrival time in TSF
 * @bi: beacon interval in TU, applicable only when associated
 * @bi_reciprocal: 2^32 / bi , applicable only when associated
 * @dtim_interval: DTIM interval in TU, applicable only when associated
 * @dtim_reciprocal: 2^32 / dtim_interval , applicable only when associated
 * @listen_interval: in beacon intervals, applicable only when associated
 * @assoc_id: unique ID assigned by the AP during association
 */
struct iwm_mac_data_sta {
        uint32_t is_assoc;
        uint32_t dtim_time;
        uint64_t dtim_tsf;
        uint32_t bi;
        uint32_t bi_reciprocal;
        uint32_t dtim_interval;
        uint32_t dtim_reciprocal;
        uint32_t listen_interval;
        uint32_t assoc_id;
        uint32_t assoc_beacon_arrive_time;
} __packed; /* IWM_STA_MAC_DATA_API_S_VER_1 */

/**
 * struct iwm_mac_data_go - configuration data for P2P GO MAC context
 * @ap: iwm_mac_data_ap struct with most config data
 * @ctwin: client traffic window in TU (period after TBTT when GO is present).
 *      0 indicates that there is no CT window.
 * @opp_ps_enabled: indicate that opportunistic PS allowed
 */
struct iwm_mac_data_go {
        struct iwm_mac_data_ap ap;
        uint32_t ctwin;
        uint32_t opp_ps_enabled;
} __packed; /* GO_MAC_DATA_API_S_VER_1 */

/**
 * struct iwm_mac_data_p2p_sta - configuration data for P2P client MAC context
 * @sta: iwm_mac_data_sta struct with most config data
 * @ctwin: client traffic window in TU (period after TBTT when GO is present).
 *      0 indicates that there is no CT window.
 */
struct iwm_mac_data_p2p_sta {
        struct iwm_mac_data_sta sta;
        uint32_t ctwin;
} __packed; /* P2P_STA_MAC_DATA_API_S_VER_1 */

/**
 * struct iwm_mac_data_pibss - Pseudo IBSS config data
 * @stats_interval: interval in TU between statistics notifications to host.
 */
struct iwm_mac_data_pibss {
        uint32_t stats_interval;
} __packed; /* PIBSS_MAC_DATA_API_S_VER_1 */

/*
 * struct iwm_mac_data_p2p_dev - configuration data for the P2P Device MAC
 * context.
 * @is_disc_extended: if set to true, P2P Device discoverability is enabled on
 *      other channels as well. This should be to true only in case that the
 *      device is discoverable and there is an active GO. Note that setting this
 *      field when not needed, will increase the number of interrupts and have
 *      effect on the platform power, as this setting opens the Rx filters on
 *      all macs.
 */
struct iwm_mac_data_p2p_dev {
        uint32_t is_disc_extended;
} __packed; /* _P2P_DEV_MAC_DATA_API_S_VER_1 */

/**
 * enum iwm_mac_filter_flags - MAC context filter flags
 * @IWM_MAC_FILTER_IN_PROMISC: accept all data frames
 * @IWM_MAC_FILTER_IN_CONTROL_AND_MGMT: pass all mangement and
 *      control frames to the host
 * @IWM_MAC_FILTER_ACCEPT_GRP: accept multicast frames
 * @IWM_MAC_FILTER_DIS_DECRYPT: don't decrypt unicast frames
 * @IWM_MAC_FILTER_DIS_GRP_DECRYPT: don't decrypt multicast frames
 * @IWM_MAC_FILTER_IN_BEACON: transfer foreign BSS's beacons to host
 *      (in station mode when associated)
 * @IWM_MAC_FILTER_OUT_BCAST: filter out all broadcast frames
 * @IWM_MAC_FILTER_IN_CRC32: extract FCS and append it to frames
 * @IWM_MAC_FILTER_IN_PROBE_REQUEST: pass probe requests to host
 */
enum iwm_mac_filter_flags {
        IWM_MAC_FILTER_IN_PROMISC               = (1 << 0),
        IWM_MAC_FILTER_IN_CONTROL_AND_MGMT      = (1 << 1),
        IWM_MAC_FILTER_ACCEPT_GRP               = (1 << 2),
        IWM_MAC_FILTER_DIS_DECRYPT              = (1 << 3),
        IWM_MAC_FILTER_DIS_GRP_DECRYPT          = (1 << 4),
        IWM_MAC_FILTER_IN_BEACON                = (1 << 6),
        IWM_MAC_FILTER_OUT_BCAST                = (1 << 8),
        IWM_MAC_FILTER_IN_CRC32                 = (1 << 11),
        IWM_MAC_FILTER_IN_PROBE_REQUEST         = (1 << 12),
};

/**
 * enum iwm_mac_qos_flags - QoS flags
 * @IWM_MAC_QOS_FLG_UPDATE_EDCA: ?
 * @IWM_MAC_QOS_FLG_TGN: HT is enabled
 * @IWM_MAC_QOS_FLG_TXOP_TYPE: ?
 *
 */
enum iwm_mac_qos_flags {
        IWM_MAC_QOS_FLG_UPDATE_EDCA     = (1 << 0),
        IWM_MAC_QOS_FLG_TGN             = (1 << 1),
        IWM_MAC_QOS_FLG_TXOP_TYPE       = (1 << 4),
};

/**
 * struct iwm_ac_qos - QOS timing params for IWM_MAC_CONTEXT_CMD
 * @cw_min: Contention window, start value in numbers of slots.
 *      Should be a power-of-2, minus 1.  Device's default is 0x0f.
 * @cw_max: Contention window, max value in numbers of slots.
 *      Should be a power-of-2, minus 1.  Device's default is 0x3f.
 * @aifsn:  Number of slots in Arbitration Interframe Space (before
 *      performing random backoff timing prior to Tx).  Device default 1.
 * @fifos_mask: FIFOs used by this MAC for this AC
 * @edca_txop:  Length of Tx opportunity, in uSecs.  Device default is 0.
 *
 * One instance of this config struct for each of 4 EDCA access categories
 * in struct iwm_qosparam_cmd.
 *
 * Device will automatically increase contention window by (2*CW) + 1 for each
 * transmission retry.  Device uses cw_max as a bit mask, ANDed with new CW
 * value, to cap the CW value.
 */
struct iwm_ac_qos {
        uint16_t cw_min;
        uint16_t cw_max;
        uint8_t aifsn;
        uint8_t fifos_mask;
        uint16_t edca_txop;
} __packed; /* IWM_AC_QOS_API_S_VER_2 */

/**
 * struct iwm_mac_ctx_cmd - command structure to configure MAC contexts
 * ( IWM_MAC_CONTEXT_CMD = 0x28 )
 * @id_and_color: ID and color of the MAC
 * @action: action to perform, one of IWM_FW_CTXT_ACTION_*
 * @mac_type: one of IWM_FW_MAC_TYPE_*
 * @tsd_id: TSF HW timer, one of IWM_TSF_ID_*
 * @node_addr: MAC address
 * @bssid_addr: BSSID
 * @cck_rates: basic rates available for CCK
 * @ofdm_rates: basic rates available for OFDM
 * @protection_flags: combination of IWM_MAC_PROT_FLG_FLAG_*
 * @cck_short_preamble: 0x20 for enabling short preamble, 0 otherwise
 * @short_slot: 0x10 for enabling short slots, 0 otherwise
 * @filter_flags: combination of IWM_MAC_FILTER_*
 * @qos_flags: from IWM_MAC_QOS_FLG_*
 * @ac: one iwm_mac_qos configuration for each AC
 * @mac_specific: one of struct iwm_mac_data_*, according to mac_type
 */
struct iwm_mac_ctx_cmd {
        /* COMMON_INDEX_HDR_API_S_VER_1 */
        uint32_t id_and_color;
        uint32_t action;
        /* IWM_MAC_CONTEXT_COMMON_DATA_API_S_VER_1 */
        uint32_t mac_type;
        uint32_t tsf_id;
        uint8_t node_addr[6];
        uint16_t reserved_for_node_addr;
        uint8_t bssid_addr[6];
        uint16_t reserved_for_bssid_addr;
        uint32_t cck_rates;
        uint32_t ofdm_rates;
        uint32_t protection_flags;
        uint32_t cck_short_preamble;
        uint32_t short_slot;
        uint32_t filter_flags;
        /* IWM_MAC_QOS_PARAM_API_S_VER_1 */
        uint32_t qos_flags;
        struct iwm_ac_qos ac[IWM_AC_NUM+1];
        /* IWM_MAC_CONTEXT_COMMON_DATA_API_S */
        union {
                struct iwm_mac_data_ap ap;
                struct iwm_mac_data_go go;
                struct iwm_mac_data_sta sta;
                struct iwm_mac_data_p2p_sta p2p_sta;
                struct iwm_mac_data_p2p_dev p2p_dev;
                struct iwm_mac_data_pibss pibss;
                struct iwm_mac_data_ibss ibss;
        };
} __packed; /* IWM_MAC_CONTEXT_CMD_API_S_VER_1 */

static inline uint32_t iwm_mvm_reciprocal(uint32_t v)
{
        if (!v)
                return 0;
        return 0xFFFFFFFF / v;
}

#define IWM_NONQOS_SEQ_GET      0x1
#define IWM_NONQOS_SEQ_SET      0x2
struct iwm_nonqos_seq_query_cmd {
        uint32_t get_set_flag;
        uint32_t mac_id_n_color;
        uint16_t value;
        uint16_t reserved;
} __packed; /* IWM_NON_QOS_TX_COUNTER_GET_SET_API_S_VER_1 */

/*
 * END mvm/fw-api-mac.h
 */

/*
 * BEGIN mvm/fw-api-power.h
 */

/* Power Management Commands, Responses, Notifications */

/**
 * enum iwm_ltr_config_flags - masks for LTR config command flags
 * @IWM_LTR_CFG_FLAG_FEATURE_ENABLE: Feature operational status
 * @IWM_LTR_CFG_FLAG_HW_DIS_ON_SHADOW_REG_ACCESS: allow LTR change on shadow
 *      memory access
 * @IWM_LTR_CFG_FLAG_HW_EN_SHRT_WR_THROUGH: allow LTR msg send on ANY LTR
 *      reg change
 * @IWM_LTR_CFG_FLAG_HW_DIS_ON_D0_2_D3: allow LTR msg send on transition from
 *      D0 to D3
 * @IWM_LTR_CFG_FLAG_SW_SET_SHORT: fixed static short LTR register
 * @IWM_LTR_CFG_FLAG_SW_SET_LONG: fixed static short LONG register
 * @IWM_LTR_CFG_FLAG_DENIE_C10_ON_PD: allow going into C10 on PD
 */
enum iwm_ltr_config_flags {
        IWM_LTR_CFG_FLAG_FEATURE_ENABLE = (1 << 0),
        IWM_LTR_CFG_FLAG_HW_DIS_ON_SHADOW_REG_ACCESS = (1 << 1),
        IWM_LTR_CFG_FLAG_HW_EN_SHRT_WR_THROUGH = (1 << 2),
        IWM_LTR_CFG_FLAG_HW_DIS_ON_D0_2_D3 = (1 << 3),
        IWM_LTR_CFG_FLAG_SW_SET_SHORT = (1 << 4),
        IWM_LTR_CFG_FLAG_SW_SET_LONG = (1 << 5),
        IWM_LTR_CFG_FLAG_DENIE_C10_ON_PD = (1 << 6),
};

/**
 * struct iwm_ltr_config_cmd_v1 - configures the LTR
 * @flags: See %enum iwm_ltr_config_flags
 */
struct iwm_ltr_config_cmd_v1 {
        uint32_t flags;
        uint32_t static_long;
        uint32_t static_short;
} __packed; /* LTR_CAPABLE_API_S_VER_1 */

#define IWM_LTR_VALID_STATES_NUM 4

/**
 * struct iwm_ltr_config_cmd - configures the LTR
 * @flags: See %enum iwm_ltr_config_flags
 * @static_long:
 * @static_short:
 * @ltr_cfg_values:
 * @ltr_short_idle_timeout:
 */
struct iwm_ltr_config_cmd {
        uint32_t flags;
        uint32_t static_long;
        uint32_t static_short;
        uint32_t ltr_cfg_values[IWM_LTR_VALID_STATES_NUM];
        uint32_t ltr_short_idle_timeout;
} __packed; /* LTR_CAPABLE_API_S_VER_2 */

/* Radio LP RX Energy Threshold measured in dBm */
#define IWM_POWER_LPRX_RSSI_THRESHOLD   75
#define IWM_POWER_LPRX_RSSI_THRESHOLD_MAX       94
#define IWM_POWER_LPRX_RSSI_THRESHOLD_MIN       30

/**
 * enum iwm_scan_flags - masks for power table command flags
 * @IWM_POWER_FLAGS_POWER_SAVE_ENA_MSK: '1' Allow to save power by turning off
 *              receiver and transmitter. '0' - does not allow.
 * @IWM_POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK: '0' Driver disables power management,
 *              '1' Driver enables PM (use rest of parameters)
 * @IWM_POWER_FLAGS_SKIP_OVER_DTIM_MSK: '0' PM have to walk up every DTIM,
 *              '1' PM could sleep over DTIM till listen Interval.
 * @IWM_POWER_FLAGS_SNOOZE_ENA_MSK: Enable snoozing only if uAPSD is enabled and all
 *              access categories are both delivery and trigger enabled.
 * @IWM_POWER_FLAGS_BT_SCO_ENA: Enable BT SCO coex only if uAPSD and
 *              PBW Snoozing enabled
 * @IWM_POWER_FLAGS_ADVANCE_PM_ENA_MSK: Advanced PM (uAPSD) enable mask
 * @IWM_POWER_FLAGS_LPRX_ENA_MSK: Low Power RX enable.
 * @IWM_POWER_FLAGS_AP_UAPSD_MISBEHAVING_ENA_MSK: AP/GO's uAPSD misbehaving
 *              detection enablement
*/
enum iwm_power_flags {
        IWM_POWER_FLAGS_POWER_SAVE_ENA_MSK              = (1 << 0),
        IWM_POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK        = (1 << 1),
        IWM_POWER_FLAGS_SKIP_OVER_DTIM_MSK              = (1 << 2),
        IWM_POWER_FLAGS_SNOOZE_ENA_MSK          = (1 << 5),
        IWM_POWER_FLAGS_BT_SCO_ENA                      = (1 << 8),
        IWM_POWER_FLAGS_ADVANCE_PM_ENA_MSK              = (1 << 9),
        IWM_POWER_FLAGS_LPRX_ENA_MSK            = (1 << 11),
        IWM_POWER_FLAGS_UAPSD_MISBEHAVING_ENA_MSK       = (1 << 12),
};

#define IWM_POWER_VEC_SIZE 5

/**
 * struct iwm_powertable_cmd - legacy power command. Beside old API support this
 *      is used also with a new power API for device wide power settings.
 * IWM_POWER_TABLE_CMD = 0x77 (command, has simple generic response)
 *
 * @flags:              Power table command flags from IWM_POWER_FLAGS_*
 * @keep_alive_seconds: Keep alive period in seconds. Default - 25 sec.
 *                      Minimum allowed:- 3 * DTIM. Keep alive period must be
 *                      set regardless of power scheme or current power state.
 *                      FW use this value also when PM is disabled.
 * @rx_data_timeout:    Minimum time (usec) from last Rx packet for AM to
 *                      PSM transition - legacy PM
 * @tx_data_timeout:    Minimum time (usec) from last Tx packet for AM to
 *                      PSM transition - legacy PM
 * @sleep_interval:     not in use
 * @skip_dtim_periods:  Number of DTIM periods to skip if Skip over DTIM flag
 *                      is set. For example, if it is required to skip over
 *                      one DTIM, this value need to be set to 2 (DTIM periods).
 * @lprx_rssi_threshold: Signal strength up to which LP RX can be enabled.
 *                      Default: 80dbm
 */
struct iwm_powertable_cmd {
        /* PM_POWER_TABLE_CMD_API_S_VER_6 */
        uint16_t flags;
        uint8_t keep_alive_seconds;
        uint8_t debug_flags;
        uint32_t rx_data_timeout;
        uint32_t tx_data_timeout;
        uint32_t sleep_interval[IWM_POWER_VEC_SIZE];
        uint32_t skip_dtim_periods;
        uint32_t lprx_rssi_threshold;
} __packed;

/**
 * enum iwm_device_power_flags - masks for device power command flags
 * @IWM_DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK: '1' Allow to save power by turning off
 *      receiver and transmitter. '0' - does not allow.
 */
enum iwm_device_power_flags {
        IWM_DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK       = (1 << 0),
};

/**
 * struct iwm_device_power_cmd - device wide power command.
 * IWM_DEVICE_POWER_CMD = 0x77 (command, has simple generic response)
 *
 * @flags:      Power table command flags from IWM_DEVICE_POWER_FLAGS_*
 */
struct iwm_device_power_cmd {
        /* PM_POWER_TABLE_CMD_API_S_VER_6 */
        uint16_t flags;
        uint16_t reserved;
} __packed;

/**
 * struct iwm_mac_power_cmd - New power command containing uAPSD support
 * IWM_MAC_PM_POWER_TABLE = 0xA9 (command, has simple generic response)
 * @id_and_color:       MAC contex identifier
 * @flags:              Power table command flags from POWER_FLAGS_*
 * @keep_alive_seconds: Keep alive period in seconds. Default - 25 sec.
 *                      Minimum allowed:- 3 * DTIM. Keep alive period must be
 *                      set regardless of power scheme or current power state.
 *                      FW use this value also when PM is disabled.
 * @rx_data_timeout:    Minimum time (usec) from last Rx packet for AM to
 *                      PSM transition - legacy PM
 * @tx_data_timeout:    Minimum time (usec) from last Tx packet for AM to
 *                      PSM transition - legacy PM
 * @sleep_interval:     not in use
 * @skip_dtim_periods:  Number of DTIM periods to skip if Skip over DTIM flag
 *                      is set. For example, if it is required to skip over
 *                      one DTIM, this value need to be set to 2 (DTIM periods).
 * @rx_data_timeout_uapsd: Minimum time (usec) from last Rx packet for AM to
 *                      PSM transition - uAPSD
 * @tx_data_timeout_uapsd: Minimum time (usec) from last Tx packet for AM to
 *                      PSM transition - uAPSD
 * @lprx_rssi_threshold: Signal strength up to which LP RX can be enabled.
 *                      Default: 80dbm
 * @num_skip_dtim:      Number of DTIMs to skip if Skip over DTIM flag is set
 * @snooze_interval:    Maximum time between attempts to retrieve buffered data
 *                      from the AP [msec]
 * @snooze_window:      A window of time in which PBW snoozing insures that all
 *                      packets received. It is also the minimum time from last
 *                      received unicast RX packet, before client stops snoozing
 *                      for data. [msec]
 * @snooze_step:        TBD
 * @qndp_tid:           TID client shall use for uAPSD QNDP triggers
 * @uapsd_ac_flags:     Set trigger-enabled and delivery-enabled indication for
 *                      each corresponding AC.
 *                      Use IEEE80211_WMM_IE_STA_QOSINFO_AC* for correct values.
 * @uapsd_max_sp:       Use IEEE80211_WMM_IE_STA_QOSINFO_SP_* for correct
 *                      values.
 * @heavy_tx_thld_packets:      TX threshold measured in number of packets
 * @heavy_rx_thld_packets:      RX threshold measured in number of packets
 * @heavy_tx_thld_percentage:   TX threshold measured in load's percentage
 * @heavy_rx_thld_percentage:   RX threshold measured in load's percentage
 * @limited_ps_threshold:
*/
struct iwm_mac_power_cmd {
        /* CONTEXT_DESC_API_T_VER_1 */
        uint32_t id_and_color;

        /* CLIENT_PM_POWER_TABLE_S_VER_1 */
        uint16_t flags;
        uint16_t keep_alive_seconds;
        uint32_t rx_data_timeout;
        uint32_t tx_data_timeout;
        uint32_t rx_data_timeout_uapsd;
        uint32_t tx_data_timeout_uapsd;
        uint8_t lprx_rssi_threshold;
        uint8_t skip_dtim_periods;
        uint16_t snooze_interval;
        uint16_t snooze_window;
        uint8_t snooze_step;
        uint8_t qndp_tid;
        uint8_t uapsd_ac_flags;
        uint8_t uapsd_max_sp;
        uint8_t heavy_tx_thld_packets;
        uint8_t heavy_rx_thld_packets;
        uint8_t heavy_tx_thld_percentage;
        uint8_t heavy_rx_thld_percentage;
        uint8_t limited_ps_threshold;
        uint8_t reserved;
} __packed;

/*
 * struct iwm_uapsd_misbehaving_ap_notif - FW sends this notification when
 * associated AP is identified as improperly implementing uAPSD protocol.
 * IWM_PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION = 0x78
 * @sta_id: index of station in uCode's station table - associated AP ID in
 *          this context.
 */
struct iwm_uapsd_misbehaving_ap_notif {
        uint32_t sta_id;
        uint8_t mac_id;
        uint8_t reserved[3];
} __packed;

/**
 * struct iwm_beacon_filter_cmd
 * IWM_REPLY_BEACON_FILTERING_CMD = 0xd2 (command)
 * @id_and_color: MAC contex identifier
 * @bf_energy_delta: Used for RSSI filtering, if in 'normal' state. Send beacon
 *      to driver if delta in Energy values calculated for this and last
 *      passed beacon is greater than this threshold. Zero value means that
 *      the Energy change is ignored for beacon filtering, and beacon will
 *      not be forced to be sent to driver regardless of this delta. Typical
 *      energy delta 5dB.
 * @bf_roaming_energy_delta: Used for RSSI filtering, if in 'roaming' state.
 *      Send beacon to driver if delta in Energy values calculated for this
 *      and last passed beacon is greater than this threshold. Zero value
 *      means that the Energy change is ignored for beacon filtering while in
 *      Roaming state, typical energy delta 1dB.
 * @bf_roaming_state: Used for RSSI filtering. If absolute Energy values
 *      calculated for current beacon is less than the threshold, use
 *      Roaming Energy Delta Threshold, otherwise use normal Energy Delta
 *      Threshold. Typical energy threshold is -72dBm.
 * @bf_temp_threshold: This threshold determines the type of temperature
 *      filtering (Slow or Fast) that is selected (Units are in Celsuis):
 *      If the current temperature is above this threshold - Fast filter
 *      will be used, If the current temperature is below this threshold -
 *      Slow filter will be used.
 * @bf_temp_fast_filter: Send Beacon to driver if delta in temperature values
 *      calculated for this and the last passed beacon is greater than this
 *      threshold. Zero value means that the temperature change is ignored for
 *      beacon filtering; beacons will not be  forced to be sent to driver
 *      regardless of whether its temperature has been changed.
 * @bf_temp_slow_filter: Send Beacon to driver if delta in temperature values
 *      calculated for this and the last passed beacon is greater than this
 *      threshold. Zero value means that the temperature change is ignored for
 *      beacon filtering; beacons will not be forced to be sent to driver
 *      regardless of whether its temperature has been changed.
 * @bf_enable_beacon_filter: 1, beacon filtering is enabled; 0, disabled.
 * @bf_filter_escape_timer: Send beacons to the driver if no beacons were passed
 *      for a specific period of time. Units: Beacons.
 * @ba_escape_timer: Fully receive and parse beacon if no beacons were passed
 *      for a longer period of time then this escape-timeout. Units: Beacons.
 * @ba_enable_beacon_abort: 1, beacon abort is enabled; 0, disabled.
 */
struct iwm_beacon_filter_cmd {
        uint32_t bf_energy_delta;
        uint32_t bf_roaming_energy_delta;
        uint32_t bf_roaming_state;
        uint32_t bf_temp_threshold;
        uint32_t bf_temp_fast_filter;
        uint32_t bf_temp_slow_filter;
        uint32_t bf_enable_beacon_filter;
        uint32_t bf_debug_flag;
        uint32_t bf_escape_timer;
        uint32_t ba_escape_timer;
        uint32_t ba_enable_beacon_abort;
} __packed;

/* Beacon filtering and beacon abort */
#define IWM_BF_ENERGY_DELTA_DEFAULT 5
#define IWM_BF_ENERGY_DELTA_MAX 255
#define IWM_BF_ENERGY_DELTA_MIN 0

#define IWM_BF_ROAMING_ENERGY_DELTA_DEFAULT 1
#define IWM_BF_ROAMING_ENERGY_DELTA_MAX 255
#define IWM_BF_ROAMING_ENERGY_DELTA_MIN 0

#define IWM_BF_ROAMING_STATE_DEFAULT 72
#define IWM_BF_ROAMING_STATE_MAX 255
#define IWM_BF_ROAMING_STATE_MIN 0

#define IWM_BF_TEMP_THRESHOLD_DEFAULT 112
#define IWM_BF_TEMP_THRESHOLD_MAX 255
#define IWM_BF_TEMP_THRESHOLD_MIN 0

#define IWM_BF_TEMP_FAST_FILTER_DEFAULT 1
#define IWM_BF_TEMP_FAST_FILTER_MAX 255
#define IWM_BF_TEMP_FAST_FILTER_MIN 0

#define IWM_BF_TEMP_SLOW_FILTER_DEFAULT 5
#define IWM_BF_TEMP_SLOW_FILTER_MAX 255
#define IWM_BF_TEMP_SLOW_FILTER_MIN 0

#define IWM_BF_ENABLE_BEACON_FILTER_DEFAULT 1

#define IWM_BF_DEBUG_FLAG_DEFAULT 0

#define IWM_BF_ESCAPE_TIMER_DEFAULT 50
#define IWM_BF_ESCAPE_TIMER_MAX 1024
#define IWM_BF_ESCAPE_TIMER_MIN 0

#define IWM_BA_ESCAPE_TIMER_DEFAULT 6
#define IWM_BA_ESCAPE_TIMER_D3 9
#define IWM_BA_ESCAPE_TIMER_MAX 1024
#define IWM_BA_ESCAPE_TIMER_MIN 0

#define IWM_BA_ENABLE_BEACON_ABORT_DEFAULT 1

#define IWM_BF_CMD_CONFIG_DEFAULTS                                           \
        .bf_energy_delta = htole32(IWM_BF_ENERGY_DELTA_DEFAULT),             \
        .bf_roaming_energy_delta =                                           \
                htole32(IWM_BF_ROAMING_ENERGY_DELTA_DEFAULT),        \
        .bf_roaming_state = htole32(IWM_BF_ROAMING_STATE_DEFAULT),           \
        .bf_temp_threshold = htole32(IWM_BF_TEMP_THRESHOLD_DEFAULT),     \
        .bf_temp_fast_filter = htole32(IWM_BF_TEMP_FAST_FILTER_DEFAULT), \
        .bf_temp_slow_filter = htole32(IWM_BF_TEMP_SLOW_FILTER_DEFAULT), \
        .bf_debug_flag = htole32(IWM_BF_DEBUG_FLAG_DEFAULT),         \
        .bf_escape_timer = htole32(IWM_BF_ESCAPE_TIMER_DEFAULT),             \
        .ba_escape_timer = htole32(IWM_BA_ESCAPE_TIMER_DEFAULT)

/*
 * END mvm/fw-api-power.h
 */

/*
 * BEGIN mvm/fw-api-rs.h
 */

/*
 * These serve as indexes into
 * struct iwm_rate_info fw_rate_idx_to_plcp[IWM_RATE_COUNT];
 * TODO: avoid overlap between legacy and HT rates
 */
enum {
        IWM_RATE_1M_INDEX = 0,
        IWM_FIRST_CCK_RATE = IWM_RATE_1M_INDEX,
        IWM_RATE_2M_INDEX,
        IWM_RATE_5M_INDEX,
        IWM_RATE_11M_INDEX,
        IWM_LAST_CCK_RATE = IWM_RATE_11M_INDEX,
        IWM_RATE_6M_INDEX,
        IWM_FIRST_OFDM_RATE = IWM_RATE_6M_INDEX,
        IWM_RATE_MCS_0_INDEX = IWM_RATE_6M_INDEX,
        IWM_FIRST_HT_RATE = IWM_RATE_MCS_0_INDEX,
        IWM_FIRST_VHT_RATE = IWM_RATE_MCS_0_INDEX,
        IWM_RATE_9M_INDEX,
        IWM_RATE_12M_INDEX,
        IWM_RATE_MCS_1_INDEX = IWM_RATE_12M_INDEX,
        IWM_RATE_18M_INDEX,
        IWM_RATE_MCS_2_INDEX = IWM_RATE_18M_INDEX,
        IWM_RATE_24M_INDEX,
        IWM_RATE_MCS_3_INDEX = IWM_RATE_24M_INDEX,
        IWM_RATE_36M_INDEX,
        IWM_RATE_MCS_4_INDEX = IWM_RATE_36M_INDEX,
        IWM_RATE_48M_INDEX,
        IWM_RATE_MCS_5_INDEX = IWM_RATE_48M_INDEX,
        IWM_RATE_54M_INDEX,
        IWM_RATE_MCS_6_INDEX = IWM_RATE_54M_INDEX,
        IWM_LAST_NON_HT_RATE = IWM_RATE_54M_INDEX,
        IWM_RATE_60M_INDEX,
        IWM_RATE_MCS_7_INDEX = IWM_RATE_60M_INDEX,
        IWM_LAST_HT_RATE = IWM_RATE_MCS_7_INDEX,
        IWM_RATE_MCS_8_INDEX,
        IWM_RATE_MCS_9_INDEX,
        IWM_LAST_VHT_RATE = IWM_RATE_MCS_9_INDEX,
        IWM_RATE_COUNT_LEGACY = IWM_LAST_NON_HT_RATE + 1,
        IWM_RATE_COUNT = IWM_LAST_VHT_RATE + 1,
};

#define IWM_RATE_BIT_MSK(r) (1 << (IWM_RATE_##r##M_INDEX))

/* fw API values for legacy bit rates, both OFDM and CCK */
enum {
        IWM_RATE_6M_PLCP  = 13,
        IWM_RATE_9M_PLCP  = 15,
        IWM_RATE_12M_PLCP = 5,
        IWM_RATE_18M_PLCP = 7,
        IWM_RATE_24M_PLCP = 9,
        IWM_RATE_36M_PLCP = 11,
        IWM_RATE_48M_PLCP = 1,
        IWM_RATE_54M_PLCP = 3,
        IWM_RATE_1M_PLCP  = 10,
        IWM_RATE_2M_PLCP  = 20,
        IWM_RATE_5M_PLCP  = 55,
        IWM_RATE_11M_PLCP = 110,
        IWM_RATE_INVM_PLCP = -1,
};

/*
 * rate_n_flags bit fields
 *
 * The 32-bit value has different layouts in the low 8 bites depending on the
 * format. There are three formats, HT, VHT and legacy (11abg, with subformats
 * for CCK and OFDM).
 *
 * High-throughput (HT) rate format
 *      bit 8 is 1, bit 26 is 0, bit 9 is 0 (OFDM)
 * Very High-throughput (VHT) rate format
 *      bit 8 is 0, bit 26 is 1, bit 9 is 0 (OFDM)
 * Legacy OFDM rate format for bits 7:0
 *      bit 8 is 0, bit 26 is 0, bit 9 is 0 (OFDM)
 * Legacy CCK rate format for bits 7:0:
 *      bit 8 is 0, bit 26 is 0, bit 9 is 1 (CCK)
 */

/* Bit 8: (1) HT format, (0) legacy or VHT format */
#define IWM_RATE_MCS_HT_POS 8
#define IWM_RATE_MCS_HT_MSK (1 << IWM_RATE_MCS_HT_POS)

/* Bit 9: (1) CCK, (0) OFDM.  HT (bit 8) must be "0" for this bit to be valid */
#define IWM_RATE_MCS_CCK_POS 9
#define IWM_RATE_MCS_CCK_MSK (1 << IWM_RATE_MCS_CCK_POS)

/* Bit 26: (1) VHT format, (0) legacy format in bits 8:0 */
#define IWM_RATE_MCS_VHT_POS 26
#define IWM_RATE_MCS_VHT_MSK (1 << IWM_RATE_MCS_VHT_POS)


/*
 * High-throughput (HT) rate format for bits 7:0
 *
 *  2-0:  MCS rate base
 *        0)   6 Mbps
 *        1)  12 Mbps
 *        2)  18 Mbps
 *        3)  24 Mbps
 *        4)  36 Mbps
 *        5)  48 Mbps
 *        6)  54 Mbps
 *        7)  60 Mbps
 *  4-3:  0)  Single stream (SISO)
 *        1)  Dual stream (MIMO)
 *        2)  Triple stream (MIMO)
 *    5:  Value of 0x20 in bits 7:0 indicates 6 Mbps HT40 duplicate data
 *  (bits 7-6 are zero)
 *
 * Together the low 5 bits work out to the MCS index because we don't
 * support MCSes above 15/23, and 0-7 have one stream, 8-15 have two
 * streams and 16-23 have three streams. We could also support MCS 32
 * which is the duplicate 20 MHz MCS (bit 5 set, all others zero.)
 */
#define IWM_RATE_HT_MCS_RATE_CODE_MSK   0x7
#define IWM_RATE_HT_MCS_NSS_POS             3
#define IWM_RATE_HT_MCS_NSS_MSK             (3 << IWM_RATE_HT_MCS_NSS_POS)

/* Bit 10: (1) Use Green Field preamble */
#define IWM_RATE_HT_MCS_GF_POS          10
#define IWM_RATE_HT_MCS_GF_MSK          (1 << IWM_RATE_HT_MCS_GF_POS)

#define IWM_RATE_HT_MCS_INDEX_MSK               0x3f

/*
 * Very High-throughput (VHT) rate format for bits 7:0
 *
 *  3-0:  VHT MCS (0-9)
 *  5-4:  number of streams - 1:
 *        0)  Single stream (SISO)
 *        1)  Dual stream (MIMO)
 *        2)  Triple stream (MIMO)
 */

/* Bit 4-5: (0) SISO, (1) MIMO2 (2) MIMO3 */
#define IWM_RATE_VHT_MCS_RATE_CODE_MSK  0xf
#define IWM_RATE_VHT_MCS_NSS_POS                4
#define IWM_RATE_VHT_MCS_NSS_MSK                (3 << IWM_RATE_VHT_MCS_NSS_POS)

/*
 * Legacy OFDM rate format for bits 7:0
 *
 *  3-0:  0xD)   6 Mbps
 *        0xF)   9 Mbps
 *        0x5)  12 Mbps
 *        0x7)  18 Mbps
 *        0x9)  24 Mbps
 *        0xB)  36 Mbps
 *        0x1)  48 Mbps
 *        0x3)  54 Mbps
 * (bits 7-4 are 0)
 *
 * Legacy CCK rate format for bits 7:0:
 * bit 8 is 0, bit 26 is 0, bit 9 is 1 (CCK):
 *
 *  6-0:   10)  1 Mbps
 *         20)  2 Mbps
 *         55)  5.5 Mbps
 *        110)  11 Mbps
 * (bit 7 is 0)
 */
#define IWM_RATE_LEGACY_RATE_MSK 0xff


/*
 * Bit 11-12: (0) 20MHz, (1) 40MHz, (2) 80MHz, (3) 160MHz
 * 0 and 1 are valid for HT and VHT, 2 and 3 only for VHT
 */
#define IWM_RATE_MCS_CHAN_WIDTH_POS     11
#define IWM_RATE_MCS_CHAN_WIDTH_MSK     (3 << IWM_RATE_MCS_CHAN_WIDTH_POS)
#define IWM_RATE_MCS_CHAN_WIDTH_20      (0 << IWM_RATE_MCS_CHAN_WIDTH_POS)
#define IWM_RATE_MCS_CHAN_WIDTH_40      (1 << IWM_RATE_MCS_CHAN_WIDTH_POS)
#define IWM_RATE_MCS_CHAN_WIDTH_80      (2 << IWM_RATE_MCS_CHAN_WIDTH_POS)
#define IWM_RATE_MCS_CHAN_WIDTH_160     (3 << IWM_RATE_MCS_CHAN_WIDTH_POS)

/* Bit 13: (1) Short guard interval (0.4 usec), (0) normal GI (0.8 usec) */
#define IWM_RATE_MCS_SGI_POS            13
#define IWM_RATE_MCS_SGI_MSK            (1 << IWM_RATE_MCS_SGI_POS)

/* Bit 14-16: Antenna selection (1) Ant A, (2) Ant B, (4) Ant C */
#define IWM_RATE_MCS_ANT_POS            14
#define IWM_RATE_MCS_ANT_A_MSK          (1 << IWM_RATE_MCS_ANT_POS)
#define IWM_RATE_MCS_ANT_B_MSK          (2 << IWM_RATE_MCS_ANT_POS)
#define IWM_RATE_MCS_ANT_C_MSK          (4 << IWM_RATE_MCS_ANT_POS)
#define IWM_RATE_MCS_ANT_AB_MSK         (IWM_RATE_MCS_ANT_A_MSK | \
                                         IWM_RATE_MCS_ANT_B_MSK)
#define IWM_RATE_MCS_ANT_ABC_MSK        (IWM_RATE_MCS_ANT_AB_MSK | \
                                         IWM_RATE_MCS_ANT_C_MSK)
#define IWM_RATE_MCS_ANT_MSK            IWM_RATE_MCS_ANT_ABC_MSK
#define IWM_RATE_MCS_ANT_NUM 3

/* Bit 17-18: (0) SS, (1) SS*2 */
#define IWM_RATE_MCS_STBC_POS           17
#define IWM_RATE_MCS_STBC_MSK           (1 << IWM_RATE_MCS_STBC_POS)

/* Bit 19: (0) Beamforming is off, (1) Beamforming is on */
#define IWM_RATE_MCS_BF_POS             19
#define IWM_RATE_MCS_BF_MSK             (1 << IWM_RATE_MCS_BF_POS)

/* Bit 20: (0) ZLF is off, (1) ZLF is on */
#define IWM_RATE_MCS_ZLF_POS            20
#define IWM_RATE_MCS_ZLF_MSK            (1 << IWM_RATE_MCS_ZLF_POS)

/* Bit 24-25: (0) 20MHz (no dup), (1) 2x20MHz, (2) 4x20MHz, 3 8x20MHz */
#define IWM_RATE_MCS_DUP_POS            24
#define IWM_RATE_MCS_DUP_MSK            (3 << IWM_RATE_MCS_DUP_POS)

/* Bit 27: (1) LDPC enabled, (0) LDPC disabled */
#define IWM_RATE_MCS_LDPC_POS           27
#define IWM_RATE_MCS_LDPC_MSK           (1 << IWM_RATE_MCS_LDPC_POS)


/* Link Quality definitions */

/* # entries in rate scale table to support Tx retries */
#define  IWM_LQ_MAX_RETRY_NUM 16

/* Link quality command flags bit fields */

/* Bit 0: (0) Don't use RTS (1) Use RTS */
#define IWM_LQ_FLAG_USE_RTS_POS         0
#define IWM_LQ_FLAG_USE_RTS_MSK         (1 << IWM_LQ_FLAG_USE_RTS_POS)

/* Bit 1-3: LQ command color. Used to match responses to LQ commands */
#define IWM_LQ_FLAG_COLOR_POS           1
#define IWM_LQ_FLAG_COLOR_MSK           (7 << IWM_LQ_FLAG_COLOR_POS)

/* Bit 4-5: Tx RTS BW Signalling
 * (0) No RTS BW signalling
 * (1) Static BW signalling
 * (2) Dynamic BW signalling
 */
#define IWM_LQ_FLAG_RTS_BW_SIG_POS      4
#define IWM_LQ_FLAG_RTS_BW_SIG_NONE     (0 << IWM_LQ_FLAG_RTS_BW_SIG_POS)
#define IWM_LQ_FLAG_RTS_BW_SIG_STATIC   (1 << IWM_LQ_FLAG_RTS_BW_SIG_POS)
#define IWM_LQ_FLAG_RTS_BW_SIG_DYNAMIC  (2 << IWM_LQ_FLAG_RTS_BW_SIG_POS)

/* Bit 6: (0) No dynamic BW selection (1) Allow dynamic BW selection
 * Dyanmic BW selection allows Tx with narrower BW then requested in rates
 */
#define IWM_LQ_FLAG_DYNAMIC_BW_POS      6
#define IWM_LQ_FLAG_DYNAMIC_BW_MSK      (1 << IWM_LQ_FLAG_DYNAMIC_BW_POS)

/* Single Stream Tx Parameters (lq_cmd->ss_params)
 * Flags to control a smart FW decision about whether BFER/STBC/SISO will be
 * used for single stream Tx.
 */

/* Bit 0-1: Max STBC streams allowed. Can be 0-3.
 * (0) - No STBC allowed
 * (1) - 2x1 STBC allowed (HT/VHT)
 * (2) - 4x2 STBC allowed (HT/VHT)
 * (3) - 3x2 STBC allowed (HT only)
 * All our chips are at most 2 antennas so only (1) is valid for now.
 */
#define IWM_LQ_SS_STBC_ALLOWED_POS      0
#define IWM_LQ_SS_STBC_ALLOWED_MSK      (3 << IWM_LQ_SS_STBC_ALLOWED_MSK)

/* 2x1 STBC is allowed */
#define IWM_LQ_SS_STBC_1SS_ALLOWED      (1 << IWM_LQ_SS_STBC_ALLOWED_POS)

/* Bit 2: Beamformer (VHT only) is allowed */
#define IWM_LQ_SS_BFER_ALLOWED_POS      2
#define IWM_LQ_SS_BFER_ALLOWED          (1 << IWM_LQ_SS_BFER_ALLOWED_POS)

/* Bit 3: Force BFER or STBC for testing
 * If this is set:
 * If BFER is allowed then force the ucode to choose BFER else
 * If STBC is allowed then force the ucode to choose STBC over SISO
 */
#define IWM_LQ_SS_FORCE_POS             3
#define IWM_LQ_SS_FORCE                 (1 << IWM_LQ_SS_FORCE_POS)

/* Bit 31: ss_params field is valid. Used for FW backward compatibility
 * with other drivers which don't support the ss_params API yet
 */
#define IWM_LQ_SS_PARAMS_VALID_POS      31
#define IWM_LQ_SS_PARAMS_VALID          (1 << IWM_LQ_SS_PARAMS_VALID_POS)

/**
 * struct iwm_lq_cmd - link quality command
 * @sta_id: station to update
 * @control: not used
 * @flags: combination of IWM_LQ_FLAG_*
 * @mimo_delim: the first SISO index in rs_table, which separates MIMO
 *      and SISO rates
 * @single_stream_ant_msk: best antenna for SISO (can be dual in CDD).
 *      Should be ANT_[ABC]
 * @dual_stream_ant_msk: best antennas for MIMO, combination of ANT_[ABC]
 * @initial_rate_index: first index from rs_table per AC category
 * @agg_time_limit: aggregation max time threshold in usec/100, meaning
 *      value of 100 is one usec. Range is 100 to 8000
 * @agg_disable_start_th: try-count threshold for starting aggregation.
 *      If a frame has higher try-count, it should not be selected for
 *      starting an aggregation sequence.
 * @agg_frame_cnt_limit: max frame count in an aggregation.
 *      0: no limit
 *      1: no aggregation (one frame per aggregation)
 *      2 - 0x3f: maximal number of frames (up to 3f == 63)
 * @rs_table: array of rates for each TX try, each is rate_n_flags,
 *      meaning it is a combination of IWM_RATE_MCS_* and IWM_RATE_*_PLCP
 * @ss_params: single stream features. declare whether STBC or BFER are allowed.
 */
struct iwm_lq_cmd {
        uint8_t sta_id;
        uint8_t reduced_tpc;
        uint16_t control;
        /* LINK_QUAL_GENERAL_PARAMS_API_S_VER_1 */
        uint8_t flags;
        uint8_t mimo_delim;
        uint8_t single_stream_ant_msk;
        uint8_t dual_stream_ant_msk;
        uint8_t initial_rate_index[IWM_AC_NUM];
        /* LINK_QUAL_AGG_PARAMS_API_S_VER_1 */
        uint16_t agg_time_limit;
        uint8_t agg_disable_start_th;
        uint8_t agg_frame_cnt_limit;
        uint32_t reserved2;
        uint32_t rs_table[IWM_LQ_MAX_RETRY_NUM];
        uint32_t ss_params;
}; /* LINK_QUALITY_CMD_API_S_VER_1 */

/*
 * END mvm/fw-api-rs.h
 */

/*
 * BEGIN mvm/fw-api-tx.h
 */

/**
 * enum iwm_tx_flags - bitmasks for tx_flags in TX command
 * @IWM_TX_CMD_FLG_PROT_REQUIRE: use RTS or CTS-to-self to protect the frame
 * @IWM_TX_CMD_FLG_ACK: expect ACK from receiving station
 * @IWM_TX_CMD_FLG_STA_RATE: use RS table with initial index from the TX command.
 *      Otherwise, use rate_n_flags from the TX command
 * @IWM_TX_CMD_FLG_BA: this frame is a block ack
 * @IWM_TX_CMD_FLG_BAR: this frame is a BA request, immediate BAR is expected
 *      Must set IWM_TX_CMD_FLG_ACK with this flag.
 * @IWM_TX_CMD_FLG_TXOP_PROT: protect frame with full TXOP protection
 * @IWM_TX_CMD_FLG_VHT_NDPA: mark frame is NDPA for VHT beamformer sequence
 * @IWM_TX_CMD_FLG_HT_NDPA: mark frame is NDPA for HT beamformer sequence
 * @IWM_TX_CMD_FLG_CSI_FDBK2HOST: mark to send feedback to host (only if good CRC)
 * @IWM_TX_CMD_FLG_BT_DIS: disable BT priority for this frame
 * @IWM_TX_CMD_FLG_SEQ_CTL: set if FW should override the sequence control.
 *      Should be set for mgmt, non-QOS data, mcast, bcast and in scan command
 * @IWM_TX_CMD_FLG_MORE_FRAG: this frame is non-last MPDU
 * @IWM_TX_CMD_FLG_NEXT_FRAME: this frame includes information of the next frame
 * @IWM_TX_CMD_FLG_TSF: FW should calculate and insert TSF in the frame
 *      Should be set for beacons and probe responses
 * @IWM_TX_CMD_FLG_CALIB: activate PA TX power calibrations
 * @IWM_TX_CMD_FLG_KEEP_SEQ_CTL: if seq_ctl is set, don't increase inner seq count
 * @IWM_TX_CMD_FLG_AGG_START: allow this frame to start aggregation
 * @IWM_TX_CMD_FLG_MH_PAD: driver inserted 2 byte padding after MAC header.
 *      Should be set for 26/30 length MAC headers
 * @IWM_TX_CMD_FLG_RESP_TO_DRV: zero this if the response should go only to FW
 * @IWM_TX_CMD_FLG_TKIP_MIC_DONE: FW already performed TKIP MIC calculation
 * @IWM_TX_CMD_FLG_DUR: disable duration overwriting used in PS-Poll Assoc-id
 * @IWM_TX_CMD_FLG_FW_DROP: FW should mark frame to be dropped
 * @IWM_TX_CMD_FLG_EXEC_PAPD: execute PAPD
 * @IWM_TX_CMD_FLG_PAPD_TYPE: 0 for reference power, 1 for nominal power
 * @IWM_TX_CMD_FLG_HCCA_CHUNK: mark start of TSPEC chunk
 */
enum iwm_tx_flags {
        IWM_TX_CMD_FLG_PROT_REQUIRE     = (1 << 0),
        IWM_TX_CMD_FLG_ACK              = (1 << 3),
        IWM_TX_CMD_FLG_STA_RATE         = (1 << 4),
        IWM_TX_CMD_FLG_BA               = (1 << 5),
        IWM_TX_CMD_FLG_BAR              = (1 << 6),
        IWM_TX_CMD_FLG_TXOP_PROT        = (1 << 7),
        IWM_TX_CMD_FLG_VHT_NDPA         = (1 << 8),
        IWM_TX_CMD_FLG_HT_NDPA          = (1 << 9),
        IWM_TX_CMD_FLG_CSI_FDBK2HOST    = (1 << 10),
        IWM_TX_CMD_FLG_BT_DIS           = (1 << 12),
        IWM_TX_CMD_FLG_SEQ_CTL          = (1 << 13),
        IWM_TX_CMD_FLG_MORE_FRAG        = (1 << 14),
        IWM_TX_CMD_FLG_NEXT_FRAME       = (1 << 15),
        IWM_TX_CMD_FLG_TSF              = (1 << 16),
        IWM_TX_CMD_FLG_CALIB            = (1 << 17),
        IWM_TX_CMD_FLG_KEEP_SEQ_CTL     = (1 << 18),
        IWM_TX_CMD_FLG_AGG_START        = (1 << 19),
        IWM_TX_CMD_FLG_MH_PAD           = (1 << 20),
        IWM_TX_CMD_FLG_RESP_TO_DRV      = (1 << 21),
        IWM_TX_CMD_FLG_TKIP_MIC_DONE    = (1 << 23),
        IWM_TX_CMD_FLG_DUR              = (1 << 25),
        IWM_TX_CMD_FLG_FW_DROP          = (1 << 26),
        IWM_TX_CMD_FLG_EXEC_PAPD        = (1 << 27),
        IWM_TX_CMD_FLG_PAPD_TYPE        = (1 << 28),
        IWM_TX_CMD_FLG_HCCA_CHUNK       = (1 << 31)
}; /* IWM_TX_FLAGS_BITS_API_S_VER_1 */

/**
 * enum iwm_tx_pm_timeouts - pm timeout values in TX command
 * @IWM_PM_FRAME_NONE: no need to suspend sleep mode
 * @IWM_PM_FRAME_MGMT: fw suspend sleep mode for 100TU
 * @IWM_PM_FRAME_ASSOC: fw suspend sleep mode for 10sec
 */
enum iwm_tx_pm_timeouts {
        IWM_PM_FRAME_NONE           = 0,
        IWM_PM_FRAME_MGMT           = 2,
        IWM_PM_FRAME_ASSOC          = 3,
};

/*
 * TX command security control
 */
#define IWM_TX_CMD_SEC_WEP              0x01
#define IWM_TX_CMD_SEC_CCM              0x02
#define IWM_TX_CMD_SEC_TKIP             0x03
#define IWM_TX_CMD_SEC_EXT              0x04
#define IWM_TX_CMD_SEC_MSK              0x07
#define IWM_TX_CMD_SEC_WEP_KEY_IDX_POS  6
#define IWM_TX_CMD_SEC_WEP_KEY_IDX_MSK  0xc0
#define IWM_TX_CMD_SEC_KEY128           0x08

/* TODO: how does these values are OK with only 16 bit variable??? */
/*
 * TX command next frame info
 *
 * bits 0:2 - security control (IWM_TX_CMD_SEC_*)
 * bit 3 - immediate ACK required
 * bit 4 - rate is taken from STA table
 * bit 5 - frame belongs to BA stream
 * bit 6 - immediate BA response expected
 * bit 7 - unused
 * bits 8:15 - Station ID
 * bits 16:31 - rate
 */
#define IWM_TX_CMD_NEXT_FRAME_ACK_MSK           (0x8)
#define IWM_TX_CMD_NEXT_FRAME_STA_RATE_MSK      (0x10)
#define IWM_TX_CMD_NEXT_FRAME_BA_MSK            (0x20)
#define IWM_TX_CMD_NEXT_FRAME_IMM_BA_RSP_MSK    (0x40)
#define IWM_TX_CMD_NEXT_FRAME_FLAGS_MSK         (0xf8)
#define IWM_TX_CMD_NEXT_FRAME_STA_ID_MSK        (0xff00)
#define IWM_TX_CMD_NEXT_FRAME_STA_ID_POS        (8)
#define IWM_TX_CMD_NEXT_FRAME_RATE_MSK          (0xffff0000)
#define IWM_TX_CMD_NEXT_FRAME_RATE_POS          (16)

/*
 * TX command Frame life time in us - to be written in pm_frame_timeout
 */
#define IWM_TX_CMD_LIFE_TIME_INFINITE   0xFFFFFFFF
#define IWM_TX_CMD_LIFE_TIME_DEFAULT    2000000 /* 2000 ms*/
#define IWM_TX_CMD_LIFE_TIME_PROBE_RESP 40000 /* 40 ms */
#define IWM_TX_CMD_LIFE_TIME_EXPIRED_FRAME      0

/*
 * TID for non QoS frames - to be written in tid_tspec
 */
#define IWM_TID_NON_QOS IWM_MAX_TID_COUNT

/*
 * Limits on the retransmissions - to be written in {data,rts}_retry_limit
 */
#define IWM_DEFAULT_TX_RETRY                    15
#define IWM_MGMT_DFAULT_RETRY_LIMIT             3
#define IWM_RTS_DFAULT_RETRY_LIMIT              60
#define IWM_BAR_DFAULT_RETRY_LIMIT              60
#define IWM_LOW_RETRY_LIMIT                     7

/* TODO: complete documentation for try_cnt and btkill_cnt */
/**
 * struct iwm_tx_cmd - TX command struct to FW
 * ( IWM_TX_CMD = 0x1c )
 * @len: in bytes of the payload, see below for details
 * @next_frame_len: same as len, but for next frame (0 if not applicable)
 *      Used for fragmentation and bursting, but not in 11n aggregation.
 * @tx_flags: combination of IWM_TX_CMD_FLG_*
 * @rate_n_flags: rate for *all* Tx attempts, if IWM_TX_CMD_FLG_STA_RATE_MSK is
 *      cleared. Combination of IWM_RATE_MCS_*
 * @sta_id: index of destination station in FW station table
 * @sec_ctl: security control, IWM_TX_CMD_SEC_*
 * @initial_rate_index: index into the rate table for initial TX attempt.
 *      Applied if IWM_TX_CMD_FLG_STA_RATE_MSK is set, normally 0 for data frames.
 * @key: security key
 * @next_frame_flags: IWM_TX_CMD_SEC_* and IWM_TX_CMD_NEXT_FRAME_*
 * @life_time: frame life time (usecs??)
 * @dram_lsb_ptr: Physical address of scratch area in the command (try_cnt +
 *      btkill_cnd + reserved), first 32 bits. "0" disables usage.
 * @dram_msb_ptr: upper bits of the scratch physical address
 * @rts_retry_limit: max attempts for RTS
 * @data_retry_limit: max attempts to send the data packet
 * @tid_spec: TID/tspec
 * @pm_frame_timeout: PM TX frame timeout
 * @driver_txop: duration od EDCA TXOP, in 32-usec units. Set this if not
 *      specified by HCCA protocol
 *
 * The byte count (both len and next_frame_len) includes MAC header
 * (24/26/30/32 bytes)
 * + 2 bytes pad if 26/30 header size
 * + 8 byte IV for CCM or TKIP (not used for WEP)
 * + Data payload
 * + 8-byte MIC (not used for CCM/WEP)
 * It does not include post-MAC padding, i.e.,
 * MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes.
 * Range of len: 14-2342 bytes.
 *
 * After the struct fields the MAC header is placed, plus any padding,
 * and then the actial payload.
 */
struct iwm_tx_cmd {
        uint16_t len;
        uint16_t next_frame_len;
        uint32_t tx_flags;
        struct {
                uint8_t try_cnt;
                uint8_t btkill_cnt;
                uint16_t reserved;
        } scratch; /* DRAM_SCRATCH_API_U_VER_1 */
        uint32_t rate_n_flags;
        uint8_t sta_id;
        uint8_t sec_ctl;
        uint8_t initial_rate_index;
        uint8_t reserved2;
        uint8_t key[16];
        uint16_t next_frame_flags;
        uint16_t reserved3;
        uint32_t life_time;
        uint32_t dram_lsb_ptr;
        uint8_t dram_msb_ptr;
        uint8_t rts_retry_limit;
        uint8_t data_retry_limit;
        uint8_t tid_tspec;
        uint16_t pm_frame_timeout;
        uint16_t driver_txop;
        uint8_t payload[0];
        struct ieee80211_frame hdr[0];
} __packed; /* IWM_TX_CMD_API_S_VER_3 */

/*
 * TX response related data
 */

/*
 * enum iwm_tx_status - status that is returned by the fw after attempts to Tx
 * @IWM_TX_STATUS_SUCCESS:
 * @IWM_TX_STATUS_DIRECT_DONE:
 * @IWM_TX_STATUS_POSTPONE_DELAY:
 * @IWM_TX_STATUS_POSTPONE_FEW_BYTES:
 * @IWM_TX_STATUS_POSTPONE_BT_PRIO:
 * @IWM_TX_STATUS_POSTPONE_QUIET_PERIOD:
 * @IWM_TX_STATUS_POSTPONE_CALC_TTAK:
 * @IWM_TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY:
 * @IWM_TX_STATUS_FAIL_SHORT_LIMIT:
 * @IWM_TX_STATUS_FAIL_LONG_LIMIT:
 * @IWM_TX_STATUS_FAIL_UNDERRUN:
 * @IWM_TX_STATUS_FAIL_DRAIN_FLOW:
 * @IWM_TX_STATUS_FAIL_RFKILL_FLUSH:
 * @IWM_TX_STATUS_FAIL_LIFE_EXPIRE:
 * @IWM_TX_STATUS_FAIL_DEST_PS:
 * @IWM_TX_STATUS_FAIL_HOST_ABORTED:
 * @IWM_TX_STATUS_FAIL_BT_RETRY:
 * @IWM_TX_STATUS_FAIL_STA_INVALID:
 * @IWM_TX_TATUS_FAIL_FRAG_DROPPED:
 * @IWM_TX_STATUS_FAIL_TID_DISABLE:
 * @IWM_TX_STATUS_FAIL_FIFO_FLUSHED:
 * @IWM_TX_STATUS_FAIL_SMALL_CF_POLL:
 * @IWM_TX_STATUS_FAIL_FW_DROP:
 * @IWM_TX_STATUS_FAIL_STA_COLOR_MISMATCH: mismatch between color of Tx cmd and
 *      STA table
 * @IWM_TX_FRAME_STATUS_INTERNAL_ABORT:
 * @IWM_TX_MODE_MSK:
 * @IWM_TX_MODE_NO_BURST:
 * @IWM_TX_MODE_IN_BURST_SEQ:
 * @IWM_TX_MODE_FIRST_IN_BURST:
 * @IWM_TX_QUEUE_NUM_MSK:
 *
 * Valid only if frame_count =1
 * TODO: complete documentation
 */
enum iwm_tx_status {
        IWM_TX_STATUS_MSK = 0x000000ff,
        IWM_TX_STATUS_SUCCESS = 0x01,
        IWM_TX_STATUS_DIRECT_DONE = 0x02,
        /* postpone TX */
        IWM_TX_STATUS_POSTPONE_DELAY = 0x40,
        IWM_TX_STATUS_POSTPONE_FEW_BYTES = 0x41,
        IWM_TX_STATUS_POSTPONE_BT_PRIO = 0x42,
        IWM_TX_STATUS_POSTPONE_QUIET_PERIOD = 0x43,
        IWM_TX_STATUS_POSTPONE_CALC_TTAK = 0x44,
        /* abort TX */
        IWM_TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY = 0x81,
        IWM_TX_STATUS_FAIL_SHORT_LIMIT = 0x82,
        IWM_TX_STATUS_FAIL_LONG_LIMIT = 0x83,
        IWM_TX_STATUS_FAIL_UNDERRUN = 0x84,
        IWM_TX_STATUS_FAIL_DRAIN_FLOW = 0x85,
        IWM_TX_STATUS_FAIL_RFKILL_FLUSH = 0x86,
        IWM_TX_STATUS_FAIL_LIFE_EXPIRE = 0x87,
        IWM_TX_STATUS_FAIL_DEST_PS = 0x88,
        IWM_TX_STATUS_FAIL_HOST_ABORTED = 0x89,
        IWM_TX_STATUS_FAIL_BT_RETRY = 0x8a,
        IWM_TX_STATUS_FAIL_STA_INVALID = 0x8b,
        IWM_TX_STATUS_FAIL_FRAG_DROPPED = 0x8c,
        IWM_TX_STATUS_FAIL_TID_DISABLE = 0x8d,
        IWM_TX_STATUS_FAIL_FIFO_FLUSHED = 0x8e,
        IWM_TX_STATUS_FAIL_SMALL_CF_POLL = 0x8f,
        IWM_TX_STATUS_FAIL_FW_DROP = 0x90,
        IWM_TX_STATUS_FAIL_STA_COLOR_MISMATCH = 0x91,
        IWM_TX_STATUS_INTERNAL_ABORT = 0x92,
        IWM_TX_MODE_MSK = 0x00000f00,
        IWM_TX_MODE_NO_BURST = 0x00000000,
        IWM_TX_MODE_IN_BURST_SEQ = 0x00000100,
        IWM_TX_MODE_FIRST_IN_BURST = 0x00000200,
        IWM_TX_QUEUE_NUM_MSK = 0x0001f000,
        IWM_TX_NARROW_BW_MSK = 0x00060000,
        IWM_TX_NARROW_BW_1DIV2 = 0x00020000,
        IWM_TX_NARROW_BW_1DIV4 = 0x00040000,
        IWM_TX_NARROW_BW_1DIV8 = 0x00060000,
};

/*
 * enum iwm_tx_agg_status - TX aggregation status
 * @IWM_AGG_TX_STATE_STATUS_MSK:
 * @IWM_AGG_TX_STATE_TRANSMITTED:
 * @IWM_AGG_TX_STATE_UNDERRUN:
 * @IWM_AGG_TX_STATE_BT_PRIO:
 * @IWM_AGG_TX_STATE_FEW_BYTES:
 * @IWM_AGG_TX_STATE_ABORT:
 * @IWM_AGG_TX_STATE_LAST_SENT_TTL:
 * @IWM_AGG_TX_STATE_LAST_SENT_TRY_CNT:
 * @IWM_AGG_TX_STATE_LAST_SENT_BT_KILL:
 * @IWM_AGG_TX_STATE_SCD_QUERY:
 * @IWM_AGG_TX_STATE_TEST_BAD_CRC32:
 * @IWM_AGG_TX_STATE_RESPONSE:
 * @IWM_AGG_TX_STATE_DUMP_TX:
 * @IWM_AGG_TX_STATE_DELAY_TX:
 * @IWM_AGG_TX_STATE_TRY_CNT_MSK: Retry count for 1st frame in aggregation (retries
 *      occur if tx failed for this frame when it was a member of a previous
 *      aggregation block). If rate scaling is used, retry count indicates the
 *      rate table entry used for all frames in the new agg.
 *@ IWM_AGG_TX_STATE_SEQ_NUM_MSK: Command ID and sequence number of Tx command for
 *      this frame
 *
 * TODO: complete documentation
 */
enum iwm_tx_agg_status {
        IWM_AGG_TX_STATE_STATUS_MSK = 0x00fff,
        IWM_AGG_TX_STATE_TRANSMITTED = 0x000,
        IWM_AGG_TX_STATE_UNDERRUN = 0x001,
        IWM_AGG_TX_STATE_BT_PRIO = 0x002,
        IWM_AGG_TX_STATE_FEW_BYTES = 0x004,
        IWM_AGG_TX_STATE_ABORT = 0x008,
        IWM_AGG_TX_STATE_LAST_SENT_TTL = 0x010,
        IWM_AGG_TX_STATE_LAST_SENT_TRY_CNT = 0x020,
        IWM_AGG_TX_STATE_LAST_SENT_BT_KILL = 0x040,
        IWM_AGG_TX_STATE_SCD_QUERY = 0x080,
        IWM_AGG_TX_STATE_TEST_BAD_CRC32 = 0x0100,
        IWM_AGG_TX_STATE_RESPONSE = 0x1ff,
        IWM_AGG_TX_STATE_DUMP_TX = 0x200,
        IWM_AGG_TX_STATE_DELAY_TX = 0x400,
        IWM_AGG_TX_STATE_TRY_CNT_POS = 12,
        IWM_AGG_TX_STATE_TRY_CNT_MSK = 0xf << IWM_AGG_TX_STATE_TRY_CNT_POS,
};

#define IWM_AGG_TX_STATE_LAST_SENT_MSK  (IWM_AGG_TX_STATE_LAST_SENT_TTL| \
                                     IWM_AGG_TX_STATE_LAST_SENT_TRY_CNT| \
                                     IWM_AGG_TX_STATE_LAST_SENT_BT_KILL)

/*
 * The mask below describes a status where we are absolutely sure that the MPDU
 * wasn't sent. For BA/Underrun we cannot be that sure. All we know that we've
 * written the bytes to the TXE, but we know nothing about what the DSP did.
 */
#define IWM_AGG_TX_STAT_FRAME_NOT_SENT (IWM_AGG_TX_STATE_FEW_BYTES | \
                                    IWM_AGG_TX_STATE_ABORT | \
                                    IWM_AGG_TX_STATE_SCD_QUERY)

/*
 * IWM_REPLY_TX = 0x1c (response)
 *
 * This response may be in one of two slightly different formats, indicated
 * by the frame_count field:
 *
 * 1)   No aggregation (frame_count == 1).  This reports Tx results for a single
 *      frame. Multiple attempts, at various bit rates, may have been made for
 *      this frame.
 *
 * 2)   Aggregation (frame_count > 1).  This reports Tx results for two or more
 *      frames that used block-acknowledge.  All frames were transmitted at
 *      same rate. Rate scaling may have been used if first frame in this new
 *      agg block failed in previous agg block(s).
 *
 *      Note that, for aggregation, ACK (block-ack) status is not delivered
 *      here; block-ack has not been received by the time the device records
 *      this status.
 *      This status relates to reasons the tx might have been blocked or aborted
 *      within the device, rather than whether it was received successfully by
 *      the destination station.
 */

/**
 * struct iwm_agg_tx_status - per packet TX aggregation status
 * @status: enum iwm_tx_agg_status
 * @sequence: Sequence # for this frame's Tx cmd (not SSN!)
 */
struct iwm_agg_tx_status {
        uint16_t status;
        uint16_t sequence;
} __packed;

/*
 * definitions for initial rate index field
 * bits [3:0] initial rate index
 * bits [6:4] rate table color, used for the initial rate
 * bit-7 invalid rate indication
 */
#define IWM_TX_RES_INIT_RATE_INDEX_MSK 0x0f
#define IWM_TX_RES_RATE_TABLE_COLOR_MSK 0x70
#define IWM_TX_RES_INV_RATE_INDEX_MSK 0x80

#define IWM_MVM_TX_RES_GET_TID(_ra_tid) ((_ra_tid) & 0x0f)
#define IWM_MVM_TX_RES_GET_RA(_ra_tid) ((_ra_tid) >> 4)

/**
 * struct iwm_mvm_tx_resp - notifies that fw is TXing a packet
 * ( IWM_REPLY_TX = 0x1c )
 * @frame_count: 1 no aggregation, >1 aggregation
 * @bt_kill_count: num of times blocked by bluetooth (unused for agg)
 * @failure_rts: num of failures due to unsuccessful RTS
 * @failure_frame: num failures due to no ACK (unused for agg)
 * @initial_rate: for non-agg: rate of the successful Tx. For agg: rate of the
 *      Tx of all the batch. IWM_RATE_MCS_*
 * @wireless_media_time: for non-agg: RTS + CTS + frame tx attempts time + ACK.
 *      for agg: RTS + CTS + aggregation tx time + block-ack time.
 *      in usec.
 * @pa_status: tx power info
 * @pa_integ_res_a: tx power info
 * @pa_integ_res_b: tx power info
 * @pa_integ_res_c: tx power info
 * @measurement_req_id: tx power info
 * @tfd_info: TFD information set by the FH
 * @seq_ctl: sequence control from the Tx cmd
 * @byte_cnt: byte count from the Tx cmd
 * @tlc_info: TLC rate info
 * @ra_tid: bits [3:0] = ra, bits [7:4] = tid
 * @frame_ctrl: frame control
 * @status: for non-agg:  frame status IWM_TX_STATUS_*
 *      for agg: status of 1st frame, IWM_AGG_TX_STATE_*; other frame status fields
 *      follow this one, up to frame_count.
 *
 * After the array of statuses comes the SSN of the SCD. Look at
 * %iwm_mvm_get_scd_ssn for more details.
 */
struct iwm_mvm_tx_resp {
        uint8_t frame_count;
        uint8_t bt_kill_count;
        uint8_t failure_rts;
        uint8_t failure_frame;
        uint32_t initial_rate;
        uint16_t wireless_media_time;

        uint8_t pa_status;
        uint8_t pa_integ_res_a[3];
        uint8_t pa_integ_res_b[3];
        uint8_t pa_integ_res_c[3];
        uint16_t measurement_req_id;
        uint8_t reduced_tpc;
        uint8_t reserved;

        uint32_t tfd_info;
        uint16_t seq_ctl;
        uint16_t byte_cnt;
        uint8_t tlc_info;
        uint8_t ra_tid;
        uint16_t frame_ctrl;

        struct iwm_agg_tx_status status;
} __packed; /* IWM_TX_RSP_API_S_VER_3 */

/**
 * struct iwm_mvm_ba_notif - notifies about reception of BA
 * ( IWM_BA_NOTIF = 0xc5 )
 * @sta_addr_lo32: lower 32 bits of the MAC address
 * @sta_addr_hi16: upper 16 bits of the MAC address
 * @sta_id: Index of recipient (BA-sending) station in fw's station table
 * @tid: tid of the session
 * @seq_ctl:
 * @bitmap: the bitmap of the BA notification as seen in the air
 * @scd_flow: the tx queue this BA relates to
 * @scd_ssn: the index of the last contiguously sent packet
 * @txed: number of Txed frames in this batch
 * @txed_2_done: number of Acked frames in this batch
 */
struct iwm_mvm_ba_notif {
        uint32_t sta_addr_lo32;
        uint16_t sta_addr_hi16;
        uint16_t reserved;

        uint8_t sta_id;
        uint8_t tid;
        uint16_t seq_ctl;
        uint64_t bitmap;
        uint16_t scd_flow;
        uint16_t scd_ssn;
        uint8_t txed;
        uint8_t txed_2_done;
        uint16_t reserved1;
} __packed;

/*
 * struct iwm_mac_beacon_cmd - beacon template command
 * @tx: the tx commands associated with the beacon frame
 * @template_id: currently equal to the mac context id of the coresponding
 *  mac.
 * @tim_idx: the offset of the tim IE in the beacon
 * @tim_size: the length of the tim IE
 * @frame: the template of the beacon frame
 */
struct iwm_mac_beacon_cmd {
        struct iwm_tx_cmd tx;
        uint32_t template_id;
        uint32_t tim_idx;
        uint32_t tim_size;
        struct ieee80211_frame frame[0];
} __packed;

struct iwm_beacon_notif {
        struct iwm_mvm_tx_resp beacon_notify_hdr;
        uint64_t tsf;
        uint32_t ibss_mgr_status;
} __packed;

/**
 * enum iwm_dump_control - dump (flush) control flags
 * @IWM_DUMP_TX_FIFO_FLUSH: Dump MSDUs until the FIFO is empty
 *      and the TFD queues are empty.
 */
enum iwm_dump_control {
        IWM_DUMP_TX_FIFO_FLUSH  = (1 << 1),
};

/**
 * struct iwm_tx_path_flush_cmd -- queue/FIFO flush command
 * @queues_ctl: bitmap of queues to flush
 * @flush_ctl: control flags
 * @reserved: reserved
 */
struct iwm_tx_path_flush_cmd {
        uint32_t queues_ctl;
        uint16_t flush_ctl;
        uint16_t reserved;
} __packed; /* IWM_TX_PATH_FLUSH_CMD_API_S_VER_1 */

/**
 * iwm_mvm_get_scd_ssn - returns the SSN of the SCD
 * @tx_resp: the Tx response from the fw (agg or non-agg)
 *
 * When the fw sends an AMPDU, it fetches the MPDUs one after the other. Since
 * it can't know that everything will go well until the end of the AMPDU, it
 * can't know in advance the number of MPDUs that will be sent in the current
 * batch. This is why it writes the agg Tx response while it fetches the MPDUs.
 * Hence, it can't know in advance what the SSN of the SCD will be at the end
 * of the batch. This is why the SSN of the SCD is written at the end of the
 * whole struct at a variable offset. This function knows how to cope with the
 * variable offset and returns the SSN of the SCD.
 */
static inline uint32_t iwm_mvm_get_scd_ssn(struct iwm_mvm_tx_resp *tx_resp)
{
        return le32_to_cpup((uint32_t *)&tx_resp->status +
                            tx_resp->frame_count) & 0xfff;
}

/*
 * END mvm/fw-api-tx.h
 */

/*
 * BEGIN mvm/fw-api-scan.h
 */

/**
 * struct iwm_scd_txq_cfg_cmd - New txq hw scheduler config command
 * @token:
 * @sta_id: station id
 * @tid:
 * @scd_queue: scheduler queue to confiug
 * @enable: 1 queue enable, 0 queue disable
 * @aggregate: 1 aggregated queue, 0 otherwise
 * @tx_fifo: %enum iwm_mvm_tx_fifo
 * @window: BA window size
 * @ssn: SSN for the BA agreement
 */
struct iwm_scd_txq_cfg_cmd {
        uint8_t token;
        uint8_t sta_id;
        uint8_t tid;
        uint8_t scd_queue;
        uint8_t enable;
        uint8_t aggregate;
        uint8_t tx_fifo;
        uint8_t window;
        uint16_t ssn;
        uint16_t reserved;
} __packed; /* SCD_QUEUE_CFG_CMD_API_S_VER_1 */

/**
 * struct iwm_scd_txq_cfg_rsp
 * @token: taken from the command
 * @sta_id: station id from the command
 * @tid: tid from the command
 * @scd_queue: scd_queue from the command
 */
struct iwm_scd_txq_cfg_rsp {
        uint8_t token;
        uint8_t sta_id;
        uint8_t tid;
        uint8_t scd_queue;
} __packed; /* SCD_QUEUE_CFG_RSP_API_S_VER_1 */


/* Scan Commands, Responses, Notifications */

/* Masks for iwm_scan_channel.type flags */
#define IWM_SCAN_CHANNEL_TYPE_ACTIVE    (1 << 0)
#define IWM_SCAN_CHANNEL_NSSIDS(x)      (((1 << (x)) - 1) << 1)

/* Max number of IEs for direct SSID scans in a command */
#define IWM_PROBE_OPTION_MAX            20

/**
 * struct iwm_ssid_ie - directed scan network information element
 *
 * Up to 20 of these may appear in IWM_REPLY_SCAN_CMD,
 * selected by "type" bit field in struct iwm_scan_channel;
 * each channel may select different ssids from among the 20 entries.
 * SSID IEs get transmitted in reverse order of entry.
 */
struct iwm_ssid_ie {
        uint8_t id;
        uint8_t len;
        uint8_t ssid[IEEE80211_NWID_LEN];
} __packed; /* IWM_SCAN_DIRECT_SSID_IE_API_S_VER_1 */

/* scan offload */
#define IWM_SCAN_MAX_BLACKLIST_LEN      64
#define IWM_SCAN_SHORT_BLACKLIST_LEN    16
#define IWM_SCAN_MAX_PROFILES           11
#define IWM_SCAN_OFFLOAD_PROBE_REQ_SIZE 512

/* Default watchdog (in MS) for scheduled scan iteration */
#define IWM_SCHED_SCAN_WATCHDOG cpu_to_le16(15000)

#define IWM_GOOD_CRC_TH_DEFAULT cpu_to_le16(1)
#define IWM_CAN_ABORT_STATUS 1

#define IWM_FULL_SCAN_MULTIPLIER 5
#define IWM_FAST_SCHED_SCAN_ITERATIONS 3
#define IWM_MAX_SCHED_SCAN_PLANS 2

/**
 * iwm_scan_schedule_lmac - schedule of scan offload
 * @delay:              delay between iterations, in seconds.
 * @iterations:         num of scan iterations
 * @full_scan_mul:      number of partial scans before each full scan
 */
struct iwm_scan_schedule_lmac {
        uint16_t delay;
        uint8_t iterations;
        uint8_t full_scan_mul;
} __packed; /* SCAN_SCHEDULE_API_S */

/**
 * iwm_scan_req_tx_cmd - SCAN_REQ_TX_CMD_API_S
 * @tx_flags: combination of TX_CMD_FLG_*
 * @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is
 *      cleared. Combination of RATE_MCS_*
 * @sta_id: index of destination station in FW station table
 * @reserved: for alignment and future use
 */
struct iwm_scan_req_tx_cmd {
        uint32_t tx_flags;
        uint32_t rate_n_flags;
        uint8_t sta_id;
        uint8_t reserved[3];
} __packed;

enum iwm_scan_channel_flags_lmac {
        IWM_UNIFIED_SCAN_CHANNEL_FULL           = (1 << 27),
        IWM_UNIFIED_SCAN_CHANNEL_PARTIAL        = (1 << 28),
};

/**
 * iwm_scan_channel_cfg_lmac - SCAN_CHANNEL_CFG_S_VER2
 * @flags:              bits 1-20: directed scan to i'th ssid
 *                      other bits &enum iwm_scan_channel_flags_lmac
 * @channel_number:     channel number 1-13 etc
 * @iter_count:         scan iteration on this channel
 * @iter_interval:      interval in seconds between iterations on one channel
 */
struct iwm_scan_channel_cfg_lmac {
        uint32_t flags;
        uint16_t channel_num;
        uint16_t iter_count;
        uint32_t iter_interval;
} __packed;

/*
 * iwm_scan_probe_segment - PROBE_SEGMENT_API_S_VER_1
 * @offset: offset in the data block
 * @len: length of the segment
 */
struct iwm_scan_probe_segment {
        uint16_t offset;
        uint16_t len;
} __packed;

/* iwm_scan_probe_req - PROBE_REQUEST_FRAME_API_S_VER_2
 * @mac_header: first (and common) part of the probe
 * @band_data: band specific data
 * @common_data: last (and common) part of the probe
 * @buf: raw data block
 */
struct iwm_scan_probe_req {
        struct iwm_scan_probe_segment mac_header;
        struct iwm_scan_probe_segment band_data[2];
        struct iwm_scan_probe_segment common_data;
        uint8_t buf[IWM_SCAN_OFFLOAD_PROBE_REQ_SIZE];
} __packed;

enum iwm_scan_channel_flags {
        IWM_SCAN_CHANNEL_FLAG_EBS               = (1 << 0),
        IWM_SCAN_CHANNEL_FLAG_EBS_ACCURATE      = (1 << 1),
        IWM_SCAN_CHANNEL_FLAG_CACHE_ADD         = (1 << 2),
};

/* iwm_scan_channel_opt - CHANNEL_OPTIMIZATION_API_S
 * @flags: enum iwm_scan_channel_flags
 * @non_ebs_ratio: defines the ratio of number of scan iterations where EBS is
 *      involved.
 *      1 - EBS is disabled.
 *      2 - every second scan will be full scan(and so on).
 */
struct iwm_scan_channel_opt {
        uint16_t flags;
        uint16_t non_ebs_ratio;
} __packed;

/**
 * iwm_mvm_lmac_scan_flags
 * @IWM_MVM_LMAC_SCAN_FLAG_PASS_ALL: pass all beacons and probe responses
 *      without filtering.
 * @IWM_MVM_LMAC_SCAN_FLAG_PASSIVE: force passive scan on all channels
 * @IWM_MVM_LMAC_SCAN_FLAG_PRE_CONNECTION: single channel scan
 * @IWM_MVM_LMAC_SCAN_FLAG_ITER_COMPLETE: send iteration complete notification
 * @IWM_MVM_LMAC_SCAN_FLAG_MULTIPLE_SSIDS multiple SSID matching
 * @IWM_MVM_LMAC_SCAN_FLAG_FRAGMENTED: all passive scans will be fragmented
 * @IWM_MVM_LMAC_SCAN_FLAGS_RRM_ENABLED: insert WFA vendor-specific TPC report
 *      and DS parameter set IEs into probe requests.
 * @IWM_MVM_LMAC_SCAN_FLAG_EXTENDED_DWELL: use extended dwell time on channels
 *      1, 6 and 11.
 * @IWM_MVM_LMAC_SCAN_FLAG_MATCH: Send match found notification on matches
 */
enum iwm_mvm_lmac_scan_flags {
        IWM_MVM_LMAC_SCAN_FLAG_PASS_ALL         = (1 << 0),
        IWM_MVM_LMAC_SCAN_FLAG_PASSIVE          = (1 << 1),
        IWM_MVM_LMAC_SCAN_FLAG_PRE_CONNECTION   = (1 << 2),
        IWM_MVM_LMAC_SCAN_FLAG_ITER_COMPLETE    = (1 << 3),
        IWM_MVM_LMAC_SCAN_FLAG_MULTIPLE_SSIDS   = (1 << 4),
        IWM_MVM_LMAC_SCAN_FLAG_FRAGMENTED       = (1 << 5),
        IWM_MVM_LMAC_SCAN_FLAGS_RRM_ENABLED     = (1 << 6),
        IWM_MVM_LMAC_SCAN_FLAG_EXTENDED_DWELL   = (1 << 7),
        IWM_MVM_LMAC_SCAN_FLAG_MATCH            = (1 << 9),
};

enum iwm_scan_priority {
        IWM_SCAN_PRIORITY_LOW,
        IWM_SCAN_PRIORITY_MEDIUM,
        IWM_SCAN_PRIORITY_HIGH,
};

/**
 * iwm_scan_req_lmac - SCAN_REQUEST_CMD_API_S_VER_1
 * @reserved1: for alignment and future use
 * @channel_num: num of channels to scan
 * @active-dwell: dwell time for active channels
 * @passive-dwell: dwell time for passive channels
 * @fragmented-dwell: dwell time for fragmented passive scan
 * @extended_dwell: dwell time for channels 1, 6 and 11 (in certain cases)
 * @reserved2: for alignment and future use
 * @rx_chain_selct: PHY_RX_CHAIN_* flags
 * @scan_flags: &enum iwm_mvm_lmac_scan_flags
 * @max_out_time: max time (in TU) to be out of associated channel
 * @suspend_time: pause scan this long (TUs) when returning to service channel
 * @flags: RXON flags
 * @filter_flags: RXON filter
 * @tx_cmd: tx command for active scan; for 2GHz and for 5GHz
 * @direct_scan: list of SSIDs for directed active scan
 * @scan_prio: enum iwm_scan_priority
 * @iter_num: number of scan iterations
 * @delay: delay in seconds before first iteration
 * @schedule: two scheduling plans. The first one is finite, the second one can
 *      be infinite.
 * @channel_opt: channel optimization options, for full and partial scan
 * @data: channel configuration and probe request packet.
 */
struct iwm_scan_req_lmac {
        /* SCAN_REQUEST_FIXED_PART_API_S_VER_7 */
        uint32_t reserved1;
        uint8_t n_channels;
        uint8_t active_dwell;
        uint8_t passive_dwell;
        uint8_t fragmented_dwell;
        uint8_t extended_dwell;
        uint8_t reserved2;
        uint16_t rx_chain_select;
        uint32_t scan_flags;
        uint32_t max_out_time;
        uint32_t suspend_time;
        /* RX_ON_FLAGS_API_S_VER_1 */
        uint32_t flags;
        uint32_t filter_flags;
        struct iwm_scan_req_tx_cmd tx_cmd[2];
        struct iwm_ssid_ie direct_scan[IWM_PROBE_OPTION_MAX];
        uint32_t scan_prio;
        /* SCAN_REQ_PERIODIC_PARAMS_API_S */
        uint32_t iter_num;
        uint32_t delay;
        struct iwm_scan_schedule_lmac schedule[IWM_MAX_SCHED_SCAN_PLANS];
        struct iwm_scan_channel_opt channel_opt[2];
        uint8_t data[];
} __packed;

/**
 * iwm_scan_offload_complete - PERIODIC_SCAN_COMPLETE_NTF_API_S_VER_2
 * @last_schedule_line: last schedule line executed (fast or regular)
 * @last_schedule_iteration: last scan iteration executed before scan abort
 * @status: enum iwm_scan_offload_complete_status
 * @ebs_status: EBS success status &enum iwm_scan_ebs_status
 * @time_after_last_iter; time in seconds elapsed after last iteration
 */
struct iwm_periodic_scan_complete {
        uint8_t last_schedule_line;
        uint8_t last_schedule_iteration;
        uint8_t status;
        uint8_t ebs_status;
        uint32_t time_after_last_iter;
        uint32_t reserved;
} __packed;

/**
 * struct iwm_scan_results_notif - scan results for one channel -
 *      SCAN_RESULT_NTF_API_S_VER_3
 * @channel: which channel the results are from
 * @band: 0 for 5.2 GHz, 1 for 2.4 GHz
 * @probe_status: IWM_SCAN_PROBE_STATUS_*, indicates success of probe request
 * @num_probe_not_sent: # of request that weren't sent due to not enough time
 * @duration: duration spent in channel, in usecs
 */
struct iwm_scan_results_notif {
        uint8_t channel;
        uint8_t band;
        uint8_t probe_status;
        uint8_t num_probe_not_sent;
        uint32_t duration;
} __packed;

enum iwm_scan_framework_client {
        IWM_SCAN_CLIENT_SCHED_SCAN      = (1 << 0),
        IWM_SCAN_CLIENT_NETDETECT       = (1 << 1),
        IWM_SCAN_CLIENT_ASSET_TRACKING  = (1 << 2),
};

/**
 * iwm_scan_offload_blacklist - IWM_SCAN_OFFLOAD_BLACKLIST_S
 * @ssid:               MAC address to filter out
 * @reported_rssi:      AP rssi reported to the host
 * @client_bitmap: clients ignore this entry  - enum scan_framework_client
 */
struct iwm_scan_offload_blacklist {
        uint8_t ssid[IEEE80211_ADDR_LEN];
        uint8_t reported_rssi;
        uint8_t client_bitmap;
} __packed;

enum iwm_scan_offload_network_type {
        IWM_NETWORK_TYPE_BSS    = 1,
        IWM_NETWORK_TYPE_IBSS   = 2,
        IWM_NETWORK_TYPE_ANY    = 3,
};

enum iwm_scan_offload_band_selection {
        IWM_SCAN_OFFLOAD_SELECT_2_4     = 0x4,
        IWM_SCAN_OFFLOAD_SELECT_5_2     = 0x8,
        IWM_SCAN_OFFLOAD_SELECT_ANY     = 0xc,
};

/**
 * iwm_scan_offload_profile - IWM_SCAN_OFFLOAD_PROFILE_S
 * @ssid_index:         index to ssid list in fixed part
 * @unicast_cipher:     encryption olgorithm to match - bitmap
 * @aut_alg:            authentication olgorithm to match - bitmap
 * @network_type:       enum iwm_scan_offload_network_type
 * @band_selection:     enum iwm_scan_offload_band_selection
 * @client_bitmap:      clients waiting for match - enum scan_framework_client
 */
struct iwm_scan_offload_profile {
        uint8_t ssid_index;
        uint8_t unicast_cipher;
        uint8_t auth_alg;
        uint8_t network_type;
        uint8_t band_selection;
        uint8_t client_bitmap;
        uint8_t reserved[2];
} __packed;

/**
 * iwm_scan_offload_profile_cfg - IWM_SCAN_OFFLOAD_PROFILES_CFG_API_S_VER_1
 * @blaclist:           AP list to filter off from scan results
 * @profiles:           profiles to search for match
 * @blacklist_len:      length of blacklist
 * @num_profiles:       num of profiles in the list
 * @match_notify:       clients waiting for match found notification
 * @pass_match:         clients waiting for the results
 * @active_clients:     active clients bitmap - enum scan_framework_client
 * @any_beacon_notify:  clients waiting for match notification without match
 */
struct iwm_scan_offload_profile_cfg {
        struct iwm_scan_offload_profile profiles[IWM_SCAN_MAX_PROFILES];
        uint8_t blacklist_len;
        uint8_t num_profiles;
        uint8_t match_notify;
        uint8_t pass_match;
        uint8_t active_clients;
        uint8_t any_beacon_notify;
        uint8_t reserved[2];
} __packed;

enum iwm_scan_offload_complete_status {
        IWM_SCAN_OFFLOAD_COMPLETED      = 1,
        IWM_SCAN_OFFLOAD_ABORTED        = 2,
};

enum iwm_scan_ebs_status {
        IWM_SCAN_EBS_SUCCESS,
        IWM_SCAN_EBS_FAILED,
        IWM_SCAN_EBS_CHAN_NOT_FOUND,
        IWM_SCAN_EBS_INACTIVE,
};

/**
 * struct iwm_lmac_scan_complete_notif - notifies end of scanning (all channels)
 *      SCAN_COMPLETE_NTF_API_S_VER_3
 * @scanned_channels: number of channels scanned (and number of valid results)
 * @status: one of SCAN_COMP_STATUS_*
 * @bt_status: BT on/off status
 * @last_channel: last channel that was scanned
 * @tsf_low: TSF timer (lower half) in usecs
 * @tsf_high: TSF timer (higher half) in usecs
 * @results: an array of scan results, only "scanned_channels" of them are valid
 */
struct iwm_lmac_scan_complete_notif {
        uint8_t scanned_channels;
        uint8_t status;
        uint8_t bt_status;
        uint8_t last_channel;
        uint32_t tsf_low;
        uint32_t tsf_high;
        struct iwm_scan_results_notif results[];
} __packed;


/*
 * END mvm/fw-api-scan.h
 */

/*
 * BEGIN mvm/fw-api-sta.h
 */

/* UMAC Scan API */

/* The maximum of either of these cannot exceed 8, because we use an
 * 8-bit mask (see IWM_MVM_SCAN_MASK).
 */
#define IWM_MVM_MAX_UMAC_SCANS 8
#define IWM_MVM_MAX_LMAC_SCANS 1

enum iwm_scan_config_flags {
        IWM_SCAN_CONFIG_FLAG_ACTIVATE                   = (1 << 0),
        IWM_SCAN_CONFIG_FLAG_DEACTIVATE                 = (1 << 1),
        IWM_SCAN_CONFIG_FLAG_FORBID_CHUB_REQS           = (1 << 2),
        IWM_SCAN_CONFIG_FLAG_ALLOW_CHUB_REQS            = (1 << 3),
        IWM_SCAN_CONFIG_FLAG_SET_TX_CHAINS              = (1 << 8),
        IWM_SCAN_CONFIG_FLAG_SET_RX_CHAINS              = (1 << 9),
        IWM_SCAN_CONFIG_FLAG_SET_AUX_STA_ID             = (1 << 10),
        IWM_SCAN_CONFIG_FLAG_SET_ALL_TIMES              = (1 << 11),
        IWM_SCAN_CONFIG_FLAG_SET_EFFECTIVE_TIMES        = (1 << 12),
        IWM_SCAN_CONFIG_FLAG_SET_CHANNEL_FLAGS          = (1 << 13),
        IWM_SCAN_CONFIG_FLAG_SET_LEGACY_RATES           = (1 << 14),
        IWM_SCAN_CONFIG_FLAG_SET_MAC_ADDR               = (1 << 15),
        IWM_SCAN_CONFIG_FLAG_SET_FRAGMENTED             = (1 << 16),
        IWM_SCAN_CONFIG_FLAG_CLEAR_FRAGMENTED           = (1 << 17),
        IWM_SCAN_CONFIG_FLAG_SET_CAM_MODE               = (1 << 18),
        IWM_SCAN_CONFIG_FLAG_CLEAR_CAM_MODE             = (1 << 19),
        IWM_SCAN_CONFIG_FLAG_SET_PROMISC_MODE           = (1 << 20),
        IWM_SCAN_CONFIG_FLAG_CLEAR_PROMISC_MODE         = (1 << 21),

        /* Bits 26-31 are for num of channels in channel_array */
#define IWM_SCAN_CONFIG_N_CHANNELS(n) ((n) << 26)
};

enum iwm_scan_config_rates {
        /* OFDM basic rates */
        IWM_SCAN_CONFIG_RATE_6M         = (1 << 0),
        IWM_SCAN_CONFIG_RATE_9M         = (1 << 1),
        IWM_SCAN_CONFIG_RATE_12M        = (1 << 2),
        IWM_SCAN_CONFIG_RATE_18M        = (1 << 3),
        IWM_SCAN_CONFIG_RATE_24M        = (1 << 4),
        IWM_SCAN_CONFIG_RATE_36M        = (1 << 5),
        IWM_SCAN_CONFIG_RATE_48M        = (1 << 6),
        IWM_SCAN_CONFIG_RATE_54M        = (1 << 7),
        /* CCK basic rates */
        IWM_SCAN_CONFIG_RATE_1M         = (1 << 8),
        IWM_SCAN_CONFIG_RATE_2M         = (1 << 9),
        IWM_SCAN_CONFIG_RATE_5M         = (1 << 10),
        IWM_SCAN_CONFIG_RATE_11M        = (1 << 11),

        /* Bits 16-27 are for supported rates */
#define IWM_SCAN_CONFIG_SUPPORTED_RATE(rate)    ((rate) << 16)
};

enum iwm_channel_flags {
        IWM_CHANNEL_FLAG_EBS                            = (1 << 0),
        IWM_CHANNEL_FLAG_ACCURATE_EBS                   = (1 << 1),
        IWM_CHANNEL_FLAG_EBS_ADD                        = (1 << 2),
        IWM_CHANNEL_FLAG_PRE_SCAN_PASSIVE2ACTIVE        = (1 << 3),
};

/**
 * struct iwm_scan_config
 * @flags:                      enum scan_config_flags
 * @tx_chains:                  valid_tx antenna - ANT_* definitions
 * @rx_chains:                  valid_rx antenna - ANT_* definitions
 * @legacy_rates:               default legacy rates - enum scan_config_rates
 * @out_of_channel_time:        default max out of serving channel time
 * @suspend_time:               default max suspend time
 * @dwell_active:               default dwell time for active scan
 * @dwell_passive:              default dwell time for passive scan
 * @dwell_fragmented:           default dwell time for fragmented scan
 * @dwell_extended:             default dwell time for channels 1, 6 and 11
 * @mac_addr:                   default mac address to be used in probes
 * @bcast_sta_id:               the index of the station in the fw
 * @channel_flags:              default channel flags - enum iwm_channel_flags
 *                              scan_config_channel_flag
 * @channel_array:              default supported channels
 */
struct iwm_scan_config {
        uint32_t flags;
        uint32_t tx_chains;
        uint32_t rx_chains;
        uint32_t legacy_rates;
        uint32_t out_of_channel_time;
        uint32_t suspend_time;
        uint8_t dwell_active;
        uint8_t dwell_passive;
        uint8_t dwell_fragmented;
        uint8_t dwell_extended;
        uint8_t mac_addr[IEEE80211_ADDR_LEN];
        uint8_t bcast_sta_id;
        uint8_t channel_flags;
        uint8_t channel_array[];
} __packed; /* SCAN_CONFIG_DB_CMD_API_S */

/**
 * iwm_umac_scan_flags
 *@IWM_UMAC_SCAN_FLAG_PREEMPTIVE: scan process triggered by this scan request
 *      can be preempted by other scan requests with higher priority.
 *      The low priority scan will be resumed when the higher proirity scan is
 *      completed.
 *@IWM_UMAC_SCAN_FLAG_START_NOTIF: notification will be sent to the driver
 *      when scan starts.
 */
enum iwm_umac_scan_flags {
        IWM_UMAC_SCAN_FLAG_PREEMPTIVE           = (1 << 0),
        IWM_UMAC_SCAN_FLAG_START_NOTIF          = (1 << 1),
};

enum iwm_umac_scan_uid_offsets {
        IWM_UMAC_SCAN_UID_TYPE_OFFSET           = 0,
        IWM_UMAC_SCAN_UID_SEQ_OFFSET            = 8,
};

enum iwm_umac_scan_general_flags {
        IWM_UMAC_SCAN_GEN_FLAGS_PERIODIC        = (1 << 0),
        IWM_UMAC_SCAN_GEN_FLAGS_OVER_BT         = (1 << 1),
        IWM_UMAC_SCAN_GEN_FLAGS_PASS_ALL        = (1 << 2),
        IWM_UMAC_SCAN_GEN_FLAGS_PASSIVE         = (1 << 3),
        IWM_UMAC_SCAN_GEN_FLAGS_PRE_CONNECT     = (1 << 4),
        IWM_UMAC_SCAN_GEN_FLAGS_ITER_COMPLETE   = (1 << 5),
        IWM_UMAC_SCAN_GEN_FLAGS_MULTIPLE_SSID   = (1 << 6),
        IWM_UMAC_SCAN_GEN_FLAGS_FRAGMENTED      = (1 << 7),
        IWM_UMAC_SCAN_GEN_FLAGS_RRM_ENABLED     = (1 << 8),
        IWM_UMAC_SCAN_GEN_FLAGS_MATCH           = (1 << 9),
        IWM_UMAC_SCAN_GEN_FLAGS_EXTENDED_DWELL  = (1 << 10),
};

/**
 * struct iwm_scan_channel_cfg_umac
 * @flags:              bitmap - 0-19:  directed scan to i'th ssid.
 * @channel_num:        channel number 1-13 etc.
 * @iter_count:         repetition count for the channel.
 * @iter_interval:      interval between two scan iterations on one channel.
 */
struct iwm_scan_channel_cfg_umac {
        uint32_t flags;
#define IWM_SCAN_CHANNEL_UMAC_NSSIDS(x)         ((1 << (x)) - 1)

        uint8_t channel_num;
        uint8_t iter_count;
        uint16_t iter_interval;
} __packed; /* SCAN_CHANNEL_CFG_S_VER2 */

/**
 * struct iwm_scan_umac_schedule
 * @interval: interval in seconds between scan iterations
 * @iter_count: num of scan iterations for schedule plan, 0xff for infinite loop
 * @reserved: for alignment and future use
 */
struct iwm_scan_umac_schedule {
        uint16_t interval;
        uint8_t iter_count;
        uint8_t reserved;
} __packed; /* SCAN_SCHED_PARAM_API_S_VER_1 */

/**
 * struct iwm_scan_req_umac_tail - the rest of the UMAC scan request command
 *      parameters following channels configuration array.
 * @schedule: two scheduling plans.
 * @delay: delay in TUs before starting the first scan iteration
 * @reserved: for future use and alignment
 * @preq: probe request with IEs blocks
 * @direct_scan: list of SSIDs for directed active scan
 */
struct iwm_scan_req_umac_tail {
        /* SCAN_PERIODIC_PARAMS_API_S_VER_1 */
        struct iwm_scan_umac_schedule schedule[IWM_MAX_SCHED_SCAN_PLANS];
        uint16_t delay;
        uint16_t reserved;
        /* SCAN_PROBE_PARAMS_API_S_VER_1 */
        struct iwm_scan_probe_req preq;
        struct iwm_ssid_ie direct_scan[IWM_PROBE_OPTION_MAX];
} __packed;

/**
 * struct iwm_scan_req_umac
 * @flags: &enum iwm_umac_scan_flags
 * @uid: scan id, &enum iwm_umac_scan_uid_offsets
 * @ooc_priority: out of channel priority - &enum iwm_scan_priority
 * @general_flags: &enum iwm_umac_scan_general_flags
 * @extended_dwell: dwell time for channels 1, 6 and 11
 * @active_dwell: dwell time for active scan
 * @passive_dwell: dwell time for passive scan
 * @fragmented_dwell: dwell time for fragmented passive scan
 * @max_out_time: max out of serving channel time
 * @suspend_time: max suspend time
 * @scan_priority: scan internal prioritization &enum iwm_scan_priority
 * @channel_flags: &enum iwm_scan_channel_flags
 * @n_channels: num of channels in scan request
 * @reserved: for future use and alignment
 * @data: &struct iwm_scan_channel_cfg_umac and
 *      &struct iwm_scan_req_umac_tail
 */
struct iwm_scan_req_umac {
        uint32_t flags;
        uint32_t uid;
        uint32_t ooc_priority;
        /* SCAN_GENERAL_PARAMS_API_S_VER_1 */
        uint32_t general_flags;
        uint8_t extended_dwell;
        uint8_t active_dwell;
        uint8_t passive_dwell;
        uint8_t fragmented_dwell;
        uint32_t max_out_time;
        uint32_t suspend_time;
        uint32_t scan_priority;
        /* SCAN_CHANNEL_PARAMS_API_S_VER_1 */
        uint8_t channel_flags;
        uint8_t n_channels;
        uint16_t reserved;
        uint8_t data[];
} __packed; /* SCAN_REQUEST_CMD_UMAC_API_S_VER_1 */

/**
 * struct iwm_umac_scan_abort
 * @uid: scan id, &enum iwm_umac_scan_uid_offsets
 * @flags: reserved
 */
struct iwm_umac_scan_abort {
        uint32_t uid;
        uint32_t flags;
} __packed; /* SCAN_ABORT_CMD_UMAC_API_S_VER_1 */

/**
 * struct iwm_umac_scan_complete
 * @uid: scan id, &enum iwm_umac_scan_uid_offsets
 * @last_schedule: last scheduling line
 * @last_iter:  last scan iteration number
 * @scan status: &enum iwm_scan_offload_complete_status
 * @ebs_status: &enum iwm_scan_ebs_status
 * @time_from_last_iter: time elapsed from last iteration
 * @reserved: for future use
 */
struct iwm_umac_scan_complete {
        uint32_t uid;
        uint8_t last_schedule;
        uint8_t last_iter;
        uint8_t status;
        uint8_t ebs_status;
        uint32_t time_from_last_iter;
        uint32_t reserved;
} __packed; /* SCAN_COMPLETE_NTF_UMAC_API_S_VER_1 */

#define IWM_SCAN_OFFLOAD_MATCHING_CHANNELS_LEN 5
/**
 * struct iwm_scan_offload_profile_match - match information
 * @bssid: matched bssid
 * @channel: channel where the match occurred
 * @energy:
 * @matching_feature:
 * @matching_channels: bitmap of channels that matched, referencing
 *      the channels passed in tue scan offload request
 */
struct iwm_scan_offload_profile_match {
        uint8_t bssid[IEEE80211_ADDR_LEN];
        uint16_t reserved;
        uint8_t channel;
        uint8_t energy;
        uint8_t matching_feature;
        uint8_t matching_channels[IWM_SCAN_OFFLOAD_MATCHING_CHANNELS_LEN];
} __packed; /* SCAN_OFFLOAD_PROFILE_MATCH_RESULTS_S_VER_1 */

/**
 * struct iwm_scan_offload_profiles_query - match results query response
 * @matched_profiles: bitmap of matched profiles, referencing the
 *      matches passed in the scan offload request
 * @last_scan_age: age of the last offloaded scan
 * @n_scans_done: number of offloaded scans done
 * @gp2_d0u: GP2 when D0U occurred
 * @gp2_invoked: GP2 when scan offload was invoked
 * @resume_while_scanning: not used
 * @self_recovery: obsolete
 * @reserved: reserved
 * @matches: array of match information, one for each match
 */
struct iwm_scan_offload_profiles_query {
        uint32_t matched_profiles;
        uint32_t last_scan_age;
        uint32_t n_scans_done;
        uint32_t gp2_d0u;
        uint32_t gp2_invoked;
        uint8_t resume_while_scanning;
        uint8_t self_recovery;
        uint16_t reserved;
        struct iwm_scan_offload_profile_match matches[IWM_SCAN_MAX_PROFILES];
} __packed; /* SCAN_OFFLOAD_PROFILES_QUERY_RSP_S_VER_2 */

/**
 * struct iwm_umac_scan_iter_complete_notif - notifies end of scanning iteration
 * @uid: scan id, &enum iwm_umac_scan_uid_offsets
 * @scanned_channels: number of channels scanned and number of valid elements in
 *      results array
 * @status: one of SCAN_COMP_STATUS_*
 * @bt_status: BT on/off status
 * @last_channel: last channel that was scanned
 * @tsf_low: TSF timer (lower half) in usecs
 * @tsf_high: TSF timer (higher half) in usecs
 * @results: array of scan results, only "scanned_channels" of them are valid
 */
struct iwm_umac_scan_iter_complete_notif {
        uint32_t uid;
        uint8_t scanned_channels;
        uint8_t status;
        uint8_t bt_status;
        uint8_t last_channel;
        uint32_t tsf_low;
        uint32_t tsf_high;
        struct iwm_scan_results_notif results[];
} __packed; /* SCAN_ITER_COMPLETE_NTF_UMAC_API_S_VER_1 */

/* Please keep this enum *SORTED* by hex value.
 * Needed for binary search, otherwise a warning will be triggered.
 */
enum iwm_scan_subcmd_ids {
        IWM_GSCAN_START_CMD = 0x0,
        IWM_GSCAN_STOP_CMD = 0x1,
        IWM_GSCAN_SET_HOTLIST_CMD = 0x2,
        IWM_GSCAN_RESET_HOTLIST_CMD = 0x3,
        IWM_GSCAN_SET_SIGNIFICANT_CHANGE_CMD = 0x4,
        IWM_GSCAN_RESET_SIGNIFICANT_CHANGE_CMD = 0x5,
        IWM_GSCAN_SIGNIFICANT_CHANGE_EVENT = 0xFD,
        IWM_GSCAN_HOTLIST_CHANGE_EVENT = 0xFE,
        IWM_GSCAN_RESULTS_AVAILABLE_EVENT = 0xFF,
};

/* STA API */

/**
 * enum iwm_sta_flags - flags for the ADD_STA host command
 * @IWM_STA_FLG_REDUCED_TX_PWR_CTRL:
 * @IWM_STA_FLG_REDUCED_TX_PWR_DATA:
 * @IWM_STA_FLG_DISABLE_TX: set if TX should be disabled
 * @IWM_STA_FLG_PS: set if STA is in Power Save
 * @IWM_STA_FLG_INVALID: set if STA is invalid
 * @IWM_STA_FLG_DLP_EN: Direct Link Protocol is enabled
 * @IWM_STA_FLG_SET_ALL_KEYS: the current key applies to all key IDs
 * @IWM_STA_FLG_DRAIN_FLOW: drain flow
 * @IWM_STA_FLG_PAN: STA is for PAN interface
 * @IWM_STA_FLG_CLASS_AUTH:
 * @IWM_STA_FLG_CLASS_ASSOC:
 * @IWM_STA_FLG_CLASS_MIMO_PROT:
 * @IWM_STA_FLG_MAX_AGG_SIZE_MSK: maximal size for A-MPDU
 * @IWM_STA_FLG_AGG_MPDU_DENS_MSK: maximal MPDU density for Tx aggregation
 * @IWM_STA_FLG_FAT_EN_MSK: support for channel width (for Tx). This flag is
 *      initialised by driver and can be updated by fw upon reception of
 *      action frames that can change the channel width. When cleared the fw
 *      will send all the frames in 20MHz even when FAT channel is requested.
 * @IWM_STA_FLG_MIMO_EN_MSK: support for MIMO. This flag is initialised by the
 *      driver and can be updated by fw upon reception of action frames.
 * @IWM_STA_FLG_MFP_EN: Management Frame Protection
 */
enum iwm_sta_flags {
        IWM_STA_FLG_REDUCED_TX_PWR_CTRL = (1 << 3),
        IWM_STA_FLG_REDUCED_TX_PWR_DATA = (1 << 6),

        IWM_STA_FLG_DISABLE_TX          = (1 << 4),

        IWM_STA_FLG_PS                  = (1 << 8),
        IWM_STA_FLG_DRAIN_FLOW          = (1 << 12),
        IWM_STA_FLG_PAN                 = (1 << 13),
        IWM_STA_FLG_CLASS_AUTH          = (1 << 14),
        IWM_STA_FLG_CLASS_ASSOC         = (1 << 15),
        IWM_STA_FLG_RTS_MIMO_PROT       = (1 << 17),

        IWM_STA_FLG_MAX_AGG_SIZE_SHIFT  = 19,
        IWM_STA_FLG_MAX_AGG_SIZE_8K     = (0 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT),
        IWM_STA_FLG_MAX_AGG_SIZE_16K    = (1 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT),
        IWM_STA_FLG_MAX_AGG_SIZE_32K    = (2 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT),
        IWM_STA_FLG_MAX_AGG_SIZE_64K    = (3 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT),
        IWM_STA_FLG_MAX_AGG_SIZE_128K   = (4 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT),
        IWM_STA_FLG_MAX_AGG_SIZE_256K   = (5 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT),
        IWM_STA_FLG_MAX_AGG_SIZE_512K   = (6 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT),
        IWM_STA_FLG_MAX_AGG_SIZE_1024K  = (7 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT),
        IWM_STA_FLG_MAX_AGG_SIZE_MSK    = (7 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT),

        IWM_STA_FLG_AGG_MPDU_DENS_SHIFT = 23,
        IWM_STA_FLG_AGG_MPDU_DENS_2US   = (4 << IWM_STA_FLG_AGG_MPDU_DENS_SHIFT),
        IWM_STA_FLG_AGG_MPDU_DENS_4US   = (5 << IWM_STA_FLG_AGG_MPDU_DENS_SHIFT),
        IWM_STA_FLG_AGG_MPDU_DENS_8US   = (6 << IWM_STA_FLG_AGG_MPDU_DENS_SHIFT),
        IWM_STA_FLG_AGG_MPDU_DENS_16US  = (7 << IWM_STA_FLG_AGG_MPDU_DENS_SHIFT),
        IWM_STA_FLG_AGG_MPDU_DENS_MSK   = (7 << IWM_STA_FLG_AGG_MPDU_DENS_SHIFT),

        IWM_STA_FLG_FAT_EN_20MHZ        = (0 << 26),
        IWM_STA_FLG_FAT_EN_40MHZ        = (1 << 26),
        IWM_STA_FLG_FAT_EN_80MHZ        = (2 << 26),
        IWM_STA_FLG_FAT_EN_160MHZ       = (3 << 26),
        IWM_STA_FLG_FAT_EN_MSK          = (3 << 26),

        IWM_STA_FLG_MIMO_EN_SISO        = (0 << 28),
        IWM_STA_FLG_MIMO_EN_MIMO2       = (1 << 28),
        IWM_STA_FLG_MIMO_EN_MIMO3       = (2 << 28),
        IWM_STA_FLG_MIMO_EN_MSK         = (3 << 28),
};

/**
 * enum iwm_sta_key_flag - key flags for the ADD_STA host command
 * @IWM_STA_KEY_FLG_NO_ENC: no encryption
 * @IWM_STA_KEY_FLG_WEP: WEP encryption algorithm
 * @IWM_STA_KEY_FLG_CCM: CCMP encryption algorithm
 * @IWM_STA_KEY_FLG_TKIP: TKIP encryption algorithm
 * @IWM_STA_KEY_FLG_EXT: extended cipher algorithm (depends on the FW support)
 * @IWM_STA_KEY_FLG_CMAC: CMAC encryption algorithm
 * @IWM_STA_KEY_FLG_ENC_UNKNOWN: unknown encryption algorithm
 * @IWM_STA_KEY_FLG_EN_MSK: mask for encryption algorithmi value
 * @IWM_STA_KEY_FLG_WEP_KEY_MAP: wep is either a group key (0 - legacy WEP) or from
 *      station info array (1 - n 1X mode)
 * @IWM_STA_KEY_FLG_KEYID_MSK: the index of the key
 * @IWM_STA_KEY_NOT_VALID: key is invalid
 * @IWM_STA_KEY_FLG_WEP_13BYTES: set for 13 bytes WEP key
 * @IWM_STA_KEY_MULTICAST: set for multical key
 * @IWM_STA_KEY_MFP: key is used for Management Frame Protection
 */
enum iwm_sta_key_flag {
        IWM_STA_KEY_FLG_NO_ENC          = (0 << 0),
        IWM_STA_KEY_FLG_WEP             = (1 << 0),
        IWM_STA_KEY_FLG_CCM             = (2 << 0),
        IWM_STA_KEY_FLG_TKIP            = (3 << 0),
        IWM_STA_KEY_FLG_EXT             = (4 << 0),
        IWM_STA_KEY_FLG_CMAC            = (6 << 0),
        IWM_STA_KEY_FLG_ENC_UNKNOWN     = (7 << 0),
        IWM_STA_KEY_FLG_EN_MSK          = (7 << 0),

        IWM_STA_KEY_FLG_WEP_KEY_MAP     = (1 << 3),
        IWM_STA_KEY_FLG_KEYID_POS       = 8,
        IWM_STA_KEY_FLG_KEYID_MSK       = (3 << IWM_STA_KEY_FLG_KEYID_POS),
        IWM_STA_KEY_NOT_VALID           = (1 << 11),
        IWM_STA_KEY_FLG_WEP_13BYTES     = (1 << 12),
        IWM_STA_KEY_MULTICAST           = (1 << 14),
        IWM_STA_KEY_MFP                 = (1 << 15),
};

/**
 * enum iwm_sta_modify_flag - indicate to the fw what flag are being changed
 * @IWM_STA_MODIFY_QUEUE_REMOVAL: this command removes a queue
 * @IWM_STA_MODIFY_TID_DISABLE_TX: this command modifies %tid_disable_tx
 * @IWM_STA_MODIFY_TX_RATE: unused
 * @IWM_STA_MODIFY_ADD_BA_TID: this command modifies %add_immediate_ba_tid
 * @IWM_STA_MODIFY_REMOVE_BA_TID: this command modifies %remove_immediate_ba_tid
 * @IWM_STA_MODIFY_SLEEPING_STA_TX_COUNT: this command modifies %sleep_tx_count
 * @IWM_STA_MODIFY_PROT_TH:
 * @IWM_STA_MODIFY_QUEUES: modify the queues used by this station
 */
enum iwm_sta_modify_flag {
        IWM_STA_MODIFY_QUEUE_REMOVAL            = (1 << 0),
        IWM_STA_MODIFY_TID_DISABLE_TX           = (1 << 1),
        IWM_STA_MODIFY_TX_RATE                  = (1 << 2),
        IWM_STA_MODIFY_ADD_BA_TID               = (1 << 3),
        IWM_STA_MODIFY_REMOVE_BA_TID            = (1 << 4),
        IWM_STA_MODIFY_SLEEPING_STA_TX_COUNT    = (1 << 5),
        IWM_STA_MODIFY_PROT_TH                  = (1 << 6),
        IWM_STA_MODIFY_QUEUES                   = (1 << 7),
};

#define IWM_STA_MODE_MODIFY     1

/**
 * enum iwm_sta_sleep_flag - type of sleep of the station
 * @IWM_STA_SLEEP_STATE_AWAKE:
 * @IWM_STA_SLEEP_STATE_PS_POLL:
 * @IWM_STA_SLEEP_STATE_UAPSD:
 * @IWM_STA_SLEEP_STATE_MOREDATA: set more-data bit on
 *      (last) released frame
 */
enum iwm_sta_sleep_flag {
        IWM_STA_SLEEP_STATE_AWAKE       = 0,
        IWM_STA_SLEEP_STATE_PS_POLL     = (1 << 0),
        IWM_STA_SLEEP_STATE_UAPSD       = (1 << 1),
        IWM_STA_SLEEP_STATE_MOREDATA    = (1 << 2),
};

/* STA ID and color bits definitions */
#define IWM_STA_ID_SEED         (0x0f)
#define IWM_STA_ID_POS          (0)
#define IWM_STA_ID_MSK          (IWM_STA_ID_SEED << IWM_STA_ID_POS)

#define IWM_STA_COLOR_SEED      (0x7)
#define IWM_STA_COLOR_POS       (4)
#define IWM_STA_COLOR_MSK       (IWM_STA_COLOR_SEED << IWM_STA_COLOR_POS)

#define IWM_STA_ID_N_COLOR_GET_COLOR(id_n_color) \
        (((id_n_color) & IWM_STA_COLOR_MSK) >> IWM_STA_COLOR_POS)
#define IWM_STA_ID_N_COLOR_GET_ID(id_n_color)    \
        (((id_n_color) & IWM_STA_ID_MSK) >> IWM_STA_ID_POS)

#define IWM_STA_KEY_MAX_NUM (16)
#define IWM_STA_KEY_IDX_INVALID (0xff)
#define IWM_STA_KEY_MAX_DATA_KEY_NUM (4)
#define IWM_MAX_GLOBAL_KEYS (4)
#define IWM_STA_KEY_LEN_WEP40 (5)
#define IWM_STA_KEY_LEN_WEP104 (13)

/**
 * struct iwm_mvm_keyinfo - key information
 * @key_flags: type %iwm_sta_key_flag
 * @tkip_rx_tsc_byte2: TSC[2] for key mix ph1 detection
 * @tkip_rx_ttak: 10-byte unicast TKIP TTAK for Rx
 * @key_offset: key offset in the fw's key table
 * @key: 16-byte unicast decryption key
 * @tx_secur_seq_cnt: initial RSC / PN needed for replay check
 * @hw_tkip_mic_rx_key: byte: MIC Rx Key - used for TKIP only
 * @hw_tkip_mic_tx_key: byte: MIC Tx Key - used for TKIP only
 */
struct iwm_mvm_keyinfo {
        uint16_t key_flags;
        uint8_t tkip_rx_tsc_byte2;
        uint8_t reserved1;
        uint16_t tkip_rx_ttak[5];
        uint8_t key_offset;
        uint8_t reserved2;
        uint8_t key[16];
        uint64_t tx_secur_seq_cnt;
        uint64_t hw_tkip_mic_rx_key;
        uint64_t hw_tkip_mic_tx_key;
} __packed;

#define IWM_ADD_STA_STATUS_MASK         0xFF
#define IWM_ADD_STA_BAID_VALID_MASK     0x8000
#define IWM_ADD_STA_BAID_MASK           0x7F00
#define IWM_ADD_STA_BAID_SHIFT          8

/**
 * struct iwm_mvm_add_sta_cmd - Add/modify a station in the fw's sta table.
 * ( REPLY_ADD_STA = 0x18 )
 * @add_modify: 1: modify existing, 0: add new station
 * @awake_acs:
 * @tid_disable_tx: is tid BIT(tid) enabled for Tx. Clear BIT(x) to enable
 *      AMPDU for tid x. Set %IWM_STA_MODIFY_TID_DISABLE_TX to change this field.
 * @mac_id_n_color: the Mac context this station belongs to
 * @addr[IEEE80211_ADDR_LEN]: station's MAC address
 * @sta_id: index of station in uCode's station table
 * @modify_mask: IWM_STA_MODIFY_*, selects which parameters to modify vs. leave
 *      alone. 1 - modify, 0 - don't change.
 * @station_flags: look at %iwm_sta_flags
 * @station_flags_msk: what of %station_flags have changed
 * @add_immediate_ba_tid: tid for which to add block-ack support (Rx)
 *      Set %IWM_STA_MODIFY_ADD_BA_TID to use this field, and also set
 *      add_immediate_ba_ssn.
 * @remove_immediate_ba_tid: tid for which to remove block-ack support (Rx)
 *      Set %IWM_STA_MODIFY_REMOVE_BA_TID to use this field
 * @add_immediate_ba_ssn: ssn for the Rx block-ack session. Used together with
 *      add_immediate_ba_tid.
 * @sleep_tx_count: number of packets to transmit to station even though it is
 *      asleep. Used to synchronise PS-poll and u-APSD responses while ucode
 *      keeps track of STA sleep state.
 * @sleep_state_flags: Look at %iwm_sta_sleep_flag.
 * @assoc_id: assoc_id to be sent in VHT PLCP (9-bit), for grp use 0, for AP
 *      mac-addr.
 * @beamform_flags: beam forming controls
 * @tfd_queue_msk: tfd queues used by this station
 *
 * The device contains an internal table of per-station information, with info
 * on security keys, aggregation parameters, and Tx rates for initial Tx
 * attempt and any retries (set by IWM_REPLY_TX_LINK_QUALITY_CMD).
 *
 * ADD_STA sets up the table entry for one station, either creating a new
 * entry, or modifying a pre-existing one.
 */
struct iwm_mvm_add_sta_cmd {
        uint8_t add_modify;
        uint8_t awake_acs;
        uint16_t tid_disable_tx;
        uint32_t mac_id_n_color;
        uint8_t addr[IEEE80211_ADDR_LEN]; /* _STA_ID_MODIFY_INFO_API_S_VER_1 */
        uint16_t reserved2;
        uint8_t sta_id;
        uint8_t modify_mask;
        uint16_t reserved3;
        uint32_t station_flags;
        uint32_t station_flags_msk;
        uint8_t add_immediate_ba_tid;
        uint8_t remove_immediate_ba_tid;
        uint16_t add_immediate_ba_ssn;
        uint16_t sleep_tx_count;
        uint16_t sleep_state_flags;
        uint16_t assoc_id;
        uint16_t beamform_flags;
        uint32_t tfd_queue_msk;
} __packed; /* ADD_STA_CMD_API_S_VER_7 */

/**
 * struct iwm_mvm_add_sta_key_cmd - add/modify sta key
 * ( IWM_REPLY_ADD_STA_KEY = 0x17 )
 * @sta_id: index of station in uCode's station table
 * @key_offset: key offset in key storage
 * @key_flags: type %iwm_sta_key_flag
 * @key: key material data
 * @key2: key material data
 * @rx_secur_seq_cnt: RX security sequence counter for the key
 * @tkip_rx_tsc_byte2: TSC[2] for key mix ph1 detection
 * @tkip_rx_ttak: 10-byte unicast TKIP TTAK for Rx
 */
struct iwm_mvm_add_sta_key_cmd {
        uint8_t sta_id;
        uint8_t key_offset;
        uint16_t key_flags;
        uint8_t key[16];
        uint8_t key2[16];
        uint8_t rx_secur_seq_cnt[16];
        uint8_t tkip_rx_tsc_byte2;
        uint8_t reserved;
        uint16_t tkip_rx_ttak[5];
} __packed; /* IWM_ADD_MODIFY_STA_KEY_API_S_VER_1 */

/**
 * enum iwm_mvm_add_sta_rsp_status - status in the response to ADD_STA command
 * @IWM_ADD_STA_SUCCESS: operation was executed successfully
 * @IWM_ADD_STA_STATIONS_OVERLOAD: no room left in the fw's station table
 * @IWM_ADD_STA_IMMEDIATE_BA_FAILURE: can't add Rx block ack session
 * @IWM_ADD_STA_MODIFY_NON_EXISTING_STA: driver requested to modify a station
 *      that doesn't exist.
 */
enum iwm_mvm_add_sta_rsp_status {
        IWM_ADD_STA_SUCCESS                     = 0x1,
        IWM_ADD_STA_STATIONS_OVERLOAD           = 0x2,
        IWM_ADD_STA_IMMEDIATE_BA_FAILURE        = 0x4,
        IWM_ADD_STA_MODIFY_NON_EXISTING_STA     = 0x8,
};

/**
 * struct iwm_mvm_rm_sta_cmd - Add / modify a station in the fw's station table
 * ( IWM_REMOVE_STA = 0x19 )
 * @sta_id: the station id of the station to be removed
 */
struct iwm_mvm_rm_sta_cmd {
        uint8_t sta_id;
        uint8_t reserved[3];
} __packed; /* IWM_REMOVE_STA_CMD_API_S_VER_2 */

/**
 * struct iwm_mvm_mgmt_mcast_key_cmd
 * ( IWM_MGMT_MCAST_KEY = 0x1f )
 * @ctrl_flags: %iwm_sta_key_flag
 * @IGTK:
 * @K1: IGTK master key
 * @K2: IGTK sub key
 * @sta_id: station ID that support IGTK
 * @key_id:
 * @receive_seq_cnt: initial RSC/PN needed for replay check
 */
struct iwm_mvm_mgmt_mcast_key_cmd {
        uint32_t ctrl_flags;
        uint8_t IGTK[16];
        uint8_t K1[16];
        uint8_t K2[16];
        uint32_t key_id;
        uint32_t sta_id;
        uint64_t receive_seq_cnt;
} __packed; /* SEC_MGMT_MULTICAST_KEY_CMD_API_S_VER_1 */

struct iwm_mvm_wep_key {
        uint8_t key_index;
        uint8_t key_offset;
        uint16_t reserved1;
        uint8_t key_size;
        uint8_t reserved2[3];
        uint8_t key[16];
} __packed;

struct iwm_mvm_wep_key_cmd {
        uint32_t mac_id_n_color;
        uint8_t num_keys;
        uint8_t decryption_type;
        uint8_t flags;
        uint8_t reserved;
        struct iwm_mvm_wep_key wep_key[0];
} __packed; /* SEC_CURR_WEP_KEY_CMD_API_S_VER_2 */

/*
 * END mvm/fw-api-sta.h
 */

/*
 * BT coex
 */

enum iwm_bt_coex_mode {
        IWM_BT_COEX_DISABLE             = 0x0,
        IWM_BT_COEX_NW                  = 0x1,
        IWM_BT_COEX_BT                  = 0x2,
        IWM_BT_COEX_WIFI                = 0x3,
}; /* BT_COEX_MODES_E */

enum iwm_bt_coex_enabled_modules {
        IWM_BT_COEX_MPLUT_ENABLED       = (1 << 0),
        IWM_BT_COEX_MPLUT_BOOST_ENABLED = (1 << 1),
        IWM_BT_COEX_SYNC2SCO_ENABLED    = (1 << 2),
        IWM_BT_COEX_CORUN_ENABLED       = (1 << 3),
        IWM_BT_COEX_HIGH_BAND_RET       = (1 << 4),
}; /* BT_COEX_MODULES_ENABLE_E_VER_1 */

/**
 * struct iwm_bt_coex_cmd - bt coex configuration command
 * @mode: enum %iwm_bt_coex_mode
 * @enabled_modules: enum %iwm_bt_coex_enabled_modules
 *
 * The structure is used for the BT_COEX command.
 */
struct iwm_bt_coex_cmd {
        uint32_t mode;
        uint32_t enabled_modules;
} __packed; /* BT_COEX_CMD_API_S_VER_6 */


/*
 * Location Aware Regulatory (LAR) API - MCC updates
 */

/**
 * struct iwm_mcc_update_cmd_v1 - Request the device to update geographic
 * regulatory profile according to the given MCC (Mobile Country Code).
 * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain.
 * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the
 * MCC in the cmd response will be the relevant MCC in the NVM.
 * @mcc: given mobile country code
 * @source_id: the source from where we got the MCC, see iwm_mcc_source
 * @reserved: reserved for alignment
 */
struct iwm_mcc_update_cmd_v1 {
        uint16_t mcc;
        uint8_t source_id;
        uint8_t reserved;
} __packed; /* LAR_UPDATE_MCC_CMD_API_S_VER_1 */

/**
 * struct iwm_mcc_update_cmd - Request the device to update geographic
 * regulatory profile according to the given MCC (Mobile Country Code).
 * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain.
 * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the
 * MCC in the cmd response will be the relevant MCC in the NVM.
 * @mcc: given mobile country code
 * @source_id: the source from where we got the MCC, see iwm_mcc_source
 * @reserved: reserved for alignment
 * @key: integrity key for MCC API OEM testing
 * @reserved2: reserved
 */
struct iwm_mcc_update_cmd {
        uint16_t mcc;
        uint8_t source_id;
        uint8_t reserved;
        uint32_t key;
        uint32_t reserved2[5];
} __packed; /* LAR_UPDATE_MCC_CMD_API_S_VER_2 */

/**
 * iwm_mcc_update_resp_v1  - response to MCC_UPDATE_CMD.
 * Contains the new channel control profile map, if changed, and the new MCC
 * (mobile country code).
 * The new MCC may be different than what was requested in MCC_UPDATE_CMD.
 * @status: see &enum iwm_mcc_update_status
 * @mcc: the new applied MCC
 * @cap: capabilities for all channels which matches the MCC
 * @source_id: the MCC source, see iwm_mcc_source
 * @n_channels: number of channels in @channels_data (may be 14, 39, 50 or 51
 *              channels, depending on platform)
 * @channels: channel control data map, DWORD for each channel. Only the first
 *      16bits are used.
 */
struct iwm_mcc_update_resp_v1  {
        uint32_t status;
        uint16_t mcc;
        uint8_t cap;
        uint8_t source_id;
        uint32_t n_channels;
        uint32_t channels[0];
} __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_1 */

/**
 * iwm_mcc_update_resp - response to MCC_UPDATE_CMD.
 * Contains the new channel control profile map, if changed, and the new MCC
 * (mobile country code).
 * The new MCC may be different than what was requested in MCC_UPDATE_CMD.
 * @status: see &enum iwm_mcc_update_status
 * @mcc: the new applied MCC
 * @cap: capabilities for all channels which matches the MCC
 * @source_id: the MCC source, see iwm_mcc_source
 * @time: time elapsed from the MCC test start (in 30 seconds TU)
 * @reserved: reserved.
 * @n_channels: number of channels in @channels_data (may be 14, 39, 50 or 51
 *              channels, depending on platform)
 * @channels: channel control data map, DWORD for each channel. Only the first
 *      16bits are used.
 */
struct iwm_mcc_update_resp {
        uint32_t status;
        uint16_t mcc;
        uint8_t cap;
        uint8_t source_id;
        uint16_t time;
        uint16_t reserved;
        uint32_t n_channels;
        uint32_t channels[0];
} __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_2 */

/**
 * struct iwm_mcc_chub_notif - chub notifies of mcc change
 * (MCC_CHUB_UPDATE_CMD = 0xc9)
 * The Chub (Communication Hub, CommsHUB) is a HW component that connects to
 * the cellular and connectivity cores that gets updates of the mcc, and
 * notifies the ucode directly of any mcc change.
 * The ucode requests the driver to request the device to update geographic
 * regulatory  profile according to the given MCC (Mobile Country Code).
 * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain.
 * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the
 * MCC in the cmd response will be the relevant MCC in the NVM.
 * @mcc: given mobile country code
 * @source_id: identity of the change originator, see iwm_mcc_source
 * @reserved1: reserved for alignment
 */
struct iwm_mcc_chub_notif {
        uint16_t mcc;
        uint8_t source_id;
        uint8_t reserved1;
} __packed; /* LAR_MCC_NOTIFY_S */

enum iwm_mcc_update_status {
        IWM_MCC_RESP_NEW_CHAN_PROFILE,
        IWM_MCC_RESP_SAME_CHAN_PROFILE,
        IWM_MCC_RESP_INVALID,
        IWM_MCC_RESP_NVM_DISABLED,
        IWM_MCC_RESP_ILLEGAL,
        IWM_MCC_RESP_LOW_PRIORITY,
        IWM_MCC_RESP_TEST_MODE_ACTIVE,
        IWM_MCC_RESP_TEST_MODE_NOT_ACTIVE,
        IWM_MCC_RESP_TEST_MODE_DENIAL_OF_SERVICE,
};

enum iwm_mcc_source {
        IWM_MCC_SOURCE_OLD_FW = 0,
        IWM_MCC_SOURCE_ME = 1,
        IWM_MCC_SOURCE_BIOS = 2,
        IWM_MCC_SOURCE_3G_LTE_HOST = 3,
        IWM_MCC_SOURCE_3G_LTE_DEVICE = 4,
        IWM_MCC_SOURCE_WIFI = 5,
        IWM_MCC_SOURCE_RESERVED = 6,
        IWM_MCC_SOURCE_DEFAULT = 7,
        IWM_MCC_SOURCE_UNINITIALIZED = 8,
        IWM_MCC_SOURCE_MCC_API = 9,
        IWM_MCC_SOURCE_GET_CURRENT = 0x10,
        IWM_MCC_SOURCE_GETTING_MCC_TEST_MODE = 0x11,
};

/**
 * struct iwm_dts_measurement_notif_v1 - measurements notification
 *
 * @temp: the measured temperature
 * @voltage: the measured voltage
 */
struct iwm_dts_measurement_notif_v1 {
        int32_t temp;
        int32_t voltage;
} __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_NTFY_S_VER_1*/

/**
 * struct iwm_dts_measurement_notif_v2 - measurements notification
 *
 * @temp: the measured temperature
 * @voltage: the measured voltage
 * @threshold_idx: the trip index that was crossed
 */
struct iwm_dts_measurement_notif_v2 {
        int32_t temp;
        int32_t voltage;
        int32_t threshold_idx;
} __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_NTFY_S_VER_2 */

/*
 * Some cherry-picked definitions
 */

#define IWM_FRAME_LIMIT 64

/*
 * These functions retrieve specific information from the id field in
 * the iwm_host_cmd struct which contains the command id, the group id,
 * and the version of the command and vice versa.
*/
static inline uint8_t
iwm_cmd_opcode(uint32_t cmdid)
{
        return cmdid & 0xff;
}

static inline uint8_t
iwm_cmd_groupid(uint32_t cmdid)
{
        return ((cmdid & 0xff00) >> 8);
}

static inline uint8_t
iwm_cmd_version(uint32_t cmdid)
{
        return ((cmdid & 0xff0000) >> 16);
}

static inline uint32_t
iwm_cmd_id(uint8_t opcode, uint8_t groupid, uint8_t version)
{
        return opcode + (groupid << 8) + (version << 16);
}

/* make uint16_t wide id out of uint8_t group and opcode */
#define IWM_WIDE_ID(grp, opcode) ((grp << 8) | opcode)

/* due to the conversion, this group is special */
#define IWM_ALWAYS_LONG_GROUP   1

struct iwm_cmd_header {
        uint8_t code;
        uint8_t flags;
        uint8_t idx;
        uint8_t qid;
} __packed;

struct iwm_cmd_header_wide {
        uint8_t opcode;
        uint8_t group_id;
        uint8_t idx;
        uint8_t qid;
        uint16_t length;
        uint8_t reserved;
        uint8_t version;
} __packed;

/**
 * enum iwm_power_scheme
 * @IWM_POWER_LEVEL_CAM - Continuously Active Mode
 * @IWM_POWER_LEVEL_BPS - Balanced Power Save (default)
 * @IWM_POWER_LEVEL_LP  - Low Power
 */
enum iwm_power_scheme {
        IWM_POWER_SCHEME_CAM = 1,
        IWM_POWER_SCHEME_BPS,
        IWM_POWER_SCHEME_LP
};

#define IWM_DEF_CMD_PAYLOAD_SIZE 320
#define IWM_MAX_CMD_PAYLOAD_SIZE ((4096 - 4) - sizeof(struct iwm_cmd_header))
#define IWM_CMD_FAILED_MSK 0x40

/**
 * struct iwm_device_cmd
 *
 * For allocation of the command and tx queues, this establishes the overall
 * size of the largest command we send to uCode, except for commands that
 * aren't fully copied and use other TFD space.
 */
struct iwm_device_cmd {
        union {
                struct {
                        struct iwm_cmd_header hdr;
                        uint8_t data[IWM_DEF_CMD_PAYLOAD_SIZE];
                };
                struct {
                        struct iwm_cmd_header_wide hdr_wide;
                        uint8_t data_wide[IWM_DEF_CMD_PAYLOAD_SIZE -
                                        sizeof(struct iwm_cmd_header_wide) +
                                        sizeof(struct iwm_cmd_header)];
                };
        };
} __packed;

struct iwm_rx_packet {
        /*
         * The first 4 bytes of the RX frame header contain both the RX frame
         * size and some flags.
         * Bit fields:
         * 31:    flag flush RB request
         * 30:    flag ignore TC (terminal counter) request
         * 29:    flag fast IRQ request
         * 28-14: Reserved
         * 13-00: RX frame size
         */
        uint32_t len_n_flags;
        struct iwm_cmd_header hdr;
        uint8_t data[];
} __packed;

#define IWM_FH_RSCSR_FRAME_SIZE_MSK     0x00003fff
#define IWM_FH_RSCSR_FRAME_INVALID      0x55550000
#define IWM_FH_RSCSR_FRAME_ALIGN        0x40

static inline uint32_t
iwm_rx_packet_len(const struct iwm_rx_packet *pkt)
{

        return le32toh(pkt->len_n_flags) & IWM_FH_RSCSR_FRAME_SIZE_MSK;
}

static inline uint32_t
iwm_rx_packet_payload_len(const struct iwm_rx_packet *pkt)
{

        return iwm_rx_packet_len(pkt) - sizeof(pkt->hdr);
}


#define IWM_MIN_DBM     -100
#define IWM_MAX_DBM     -33     /* realistic guess */

#define IWM_READ(sc, reg)                                               \
        bus_space_read_4((sc)->sc_st, (sc)->sc_sh, (reg))

#define IWM_WRITE(sc, reg, val)                                         \
        bus_space_write_4((sc)->sc_st, (sc)->sc_sh, (reg), (val))

#define IWM_WRITE_1(sc, reg, val)                                       \
        bus_space_write_1((sc)->sc_st, (sc)->sc_sh, (reg), (val))

#define IWM_SETBITS(sc, reg, mask)                                      \
        IWM_WRITE(sc, reg, IWM_READ(sc, reg) | (mask))

#define IWM_CLRBITS(sc, reg, mask)                                      \
        IWM_WRITE(sc, reg, IWM_READ(sc, reg) & ~(mask))

#define IWM_BARRIER_WRITE(sc)                                           \
        bus_space_barrier((sc)->sc_st, (sc)->sc_sh, 0, (sc)->sc_sz,     \
            BUS_SPACE_BARRIER_WRITE)

#define IWM_BARRIER_READ_WRITE(sc)                                      \
        bus_space_barrier((sc)->sc_st, (sc)->sc_sh, 0, (sc)->sc_sz,     \
            BUS_SPACE_BARRIER_READ | BUS_SPACE_BARRIER_WRITE)

#endif  /* __IF_IWM_REG_H__ */