2 * Copyright (c) 2007-2009 Damien Bergamini <damien.bergamini@free.fr>
3 * Copyright (c) 2008 Benjamin Close <benjsc@FreeBSD.org>
4 * Copyright (c) 2008 Sam Leffler, Errno Consulting
5 * Copyright (c) 2011 Intel Corporation
6 * Copyright (c) 2013 Cedric GROSS <c.gross@kreiz-it.fr>
7 * Copyright (c) 2013 Adrian Chadd <adrian@FreeBSD.org>
9 * Permission to use, copy, modify, and distribute this software for any
10 * purpose with or without fee is hereby granted, provided that the above
11 * copyright notice and this permission notice appear in all copies.
13 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
14 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
15 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
16 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
17 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
18 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
19 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
23 * Driver for Intel WiFi Link 4965 and 1000/5000/6000 Series 802.11 network
27 #include <sys/cdefs.h>
28 __FBSDID("$FreeBSD$");
33 #include <sys/param.h>
34 #include <sys/sockio.h>
35 #include <sys/sysctl.h>
37 #include <sys/kernel.h>
38 #include <sys/socket.h>
39 #include <sys/systm.h>
40 #include <sys/malloc.h>
44 #include <sys/endian.h>
45 #include <sys/firmware.h>
46 #include <sys/limits.h>
47 #include <sys/module.h>
49 #include <sys/queue.h>
50 #include <sys/taskqueue.h>
52 #include <machine/bus.h>
53 #include <machine/resource.h>
54 #include <machine/clock.h>
56 #include <dev/pci/pcireg.h>
57 #include <dev/pci/pcivar.h>
60 #include <net/if_var.h>
61 #include <net/if_dl.h>
62 #include <net/if_media.h>
64 #include <netinet/in.h>
65 #include <netinet/if_ether.h>
67 #include <net80211/ieee80211_var.h>
68 #include <net80211/ieee80211_radiotap.h>
69 #include <net80211/ieee80211_regdomain.h>
70 #include <net80211/ieee80211_ratectl.h>
72 #include <dev/iwn/if_iwnreg.h>
73 #include <dev/iwn/if_iwnvar.h>
74 #include <dev/iwn/if_iwn_devid.h>
75 #include <dev/iwn/if_iwn_chip_cfg.h>
76 #include <dev/iwn/if_iwn_debug.h>
77 #include <dev/iwn/if_iwn_ioctl.h>
85 static const struct iwn_ident iwn_ident_table[] = {
86 { 0x8086, IWN_DID_6x05_1, "Intel Centrino Advanced-N 6205" },
87 { 0x8086, IWN_DID_1000_1, "Intel Centrino Wireless-N 1000" },
88 { 0x8086, IWN_DID_1000_2, "Intel Centrino Wireless-N 1000" },
89 { 0x8086, IWN_DID_6x05_2, "Intel Centrino Advanced-N 6205" },
90 { 0x8086, IWN_DID_6050_1, "Intel Centrino Advanced-N + WiMAX 6250" },
91 { 0x8086, IWN_DID_6050_2, "Intel Centrino Advanced-N + WiMAX 6250" },
92 { 0x8086, IWN_DID_x030_1, "Intel Centrino Wireless-N 1030" },
93 { 0x8086, IWN_DID_x030_2, "Intel Centrino Wireless-N 1030" },
94 { 0x8086, IWN_DID_x030_3, "Intel Centrino Advanced-N 6230" },
95 { 0x8086, IWN_DID_x030_4, "Intel Centrino Advanced-N 6230" },
96 { 0x8086, IWN_DID_6150_1, "Intel Centrino Wireless-N + WiMAX 6150" },
97 { 0x8086, IWN_DID_6150_2, "Intel Centrino Wireless-N + WiMAX 6150" },
98 { 0x8086, IWN_DID_2x00_1, "Intel(R) Centrino(R) Wireless-N 2200 BGN" },
99 { 0x8086, IWN_DID_2x00_2, "Intel(R) Centrino(R) Wireless-N 2200 BGN" },
100 /* XXX 2200D is IWN_SDID_2x00_4; there's no way to express this here! */
101 { 0x8086, IWN_DID_2x30_1, "Intel Centrino Wireless-N 2230" },
102 { 0x8086, IWN_DID_2x30_2, "Intel Centrino Wireless-N 2230" },
103 { 0x8086, IWN_DID_130_1, "Intel Centrino Wireless-N 130" },
104 { 0x8086, IWN_DID_130_2, "Intel Centrino Wireless-N 130" },
105 { 0x8086, IWN_DID_100_1, "Intel Centrino Wireless-N 100" },
106 { 0x8086, IWN_DID_100_2, "Intel Centrino Wireless-N 100" },
107 { 0x8086, IWN_DID_105_1, "Intel Centrino Wireless-N 105" },
108 { 0x8086, IWN_DID_105_2, "Intel Centrino Wireless-N 105" },
109 { 0x8086, IWN_DID_135_1, "Intel Centrino Wireless-N 135" },
110 { 0x8086, IWN_DID_135_2, "Intel Centrino Wireless-N 135" },
111 { 0x8086, IWN_DID_4965_1, "Intel Wireless WiFi Link 4965" },
112 { 0x8086, IWN_DID_6x00_1, "Intel Centrino Ultimate-N 6300" },
113 { 0x8086, IWN_DID_6x00_2, "Intel Centrino Advanced-N 6200" },
114 { 0x8086, IWN_DID_4965_2, "Intel Wireless WiFi Link 4965" },
115 { 0x8086, IWN_DID_4965_3, "Intel Wireless WiFi Link 4965" },
116 { 0x8086, IWN_DID_5x00_1, "Intel WiFi Link 5100" },
117 { 0x8086, IWN_DID_4965_4, "Intel Wireless WiFi Link 4965" },
118 { 0x8086, IWN_DID_5x00_3, "Intel Ultimate N WiFi Link 5300" },
119 { 0x8086, IWN_DID_5x00_4, "Intel Ultimate N WiFi Link 5300" },
120 { 0x8086, IWN_DID_5x00_2, "Intel WiFi Link 5100" },
121 { 0x8086, IWN_DID_6x00_3, "Intel Centrino Ultimate-N 6300" },
122 { 0x8086, IWN_DID_6x00_4, "Intel Centrino Advanced-N 6200" },
123 { 0x8086, IWN_DID_5x50_1, "Intel WiMAX/WiFi Link 5350" },
124 { 0x8086, IWN_DID_5x50_2, "Intel WiMAX/WiFi Link 5350" },
125 { 0x8086, IWN_DID_5x50_3, "Intel WiMAX/WiFi Link 5150" },
126 { 0x8086, IWN_DID_5x50_4, "Intel WiMAX/WiFi Link 5150" },
127 { 0x8086, IWN_DID_6035_1, "Intel Centrino Advanced 6235" },
128 { 0x8086, IWN_DID_6035_2, "Intel Centrino Advanced 6235" },
132 static int iwn_probe(device_t);
133 static int iwn_attach(device_t);
134 static int iwn4965_attach(struct iwn_softc *, uint16_t);
135 static int iwn5000_attach(struct iwn_softc *, uint16_t);
136 static int iwn_config_specific(struct iwn_softc *, uint16_t);
137 static void iwn_radiotap_attach(struct iwn_softc *);
138 static void iwn_sysctlattach(struct iwn_softc *);
139 static struct ieee80211vap *iwn_vap_create(struct ieee80211com *,
140 const char [IFNAMSIZ], int, enum ieee80211_opmode, int,
141 const uint8_t [IEEE80211_ADDR_LEN],
142 const uint8_t [IEEE80211_ADDR_LEN]);
143 static void iwn_vap_delete(struct ieee80211vap *);
144 static int iwn_detach(device_t);
145 static int iwn_shutdown(device_t);
146 static int iwn_suspend(device_t);
147 static int iwn_resume(device_t);
148 static int iwn_nic_lock(struct iwn_softc *);
149 static int iwn_eeprom_lock(struct iwn_softc *);
150 static int iwn_init_otprom(struct iwn_softc *);
151 static int iwn_read_prom_data(struct iwn_softc *, uint32_t, void *, int);
152 static void iwn_dma_map_addr(void *, bus_dma_segment_t *, int, int);
153 static int iwn_dma_contig_alloc(struct iwn_softc *, struct iwn_dma_info *,
154 void **, bus_size_t, bus_size_t);
155 static void iwn_dma_contig_free(struct iwn_dma_info *);
156 static int iwn_alloc_sched(struct iwn_softc *);
157 static void iwn_free_sched(struct iwn_softc *);
158 static int iwn_alloc_kw(struct iwn_softc *);
159 static void iwn_free_kw(struct iwn_softc *);
160 static int iwn_alloc_ict(struct iwn_softc *);
161 static void iwn_free_ict(struct iwn_softc *);
162 static int iwn_alloc_fwmem(struct iwn_softc *);
163 static void iwn_free_fwmem(struct iwn_softc *);
164 static int iwn_alloc_rx_ring(struct iwn_softc *, struct iwn_rx_ring *);
165 static void iwn_reset_rx_ring(struct iwn_softc *, struct iwn_rx_ring *);
166 static void iwn_free_rx_ring(struct iwn_softc *, struct iwn_rx_ring *);
167 static int iwn_alloc_tx_ring(struct iwn_softc *, struct iwn_tx_ring *,
169 static void iwn_reset_tx_ring(struct iwn_softc *, struct iwn_tx_ring *);
170 static void iwn_free_tx_ring(struct iwn_softc *, struct iwn_tx_ring *);
171 static void iwn5000_ict_reset(struct iwn_softc *);
172 static int iwn_read_eeprom(struct iwn_softc *,
173 uint8_t macaddr[IEEE80211_ADDR_LEN]);
174 static void iwn4965_read_eeprom(struct iwn_softc *);
176 static void iwn4965_print_power_group(struct iwn_softc *, int);
178 static void iwn5000_read_eeprom(struct iwn_softc *);
179 static uint32_t iwn_eeprom_channel_flags(struct iwn_eeprom_chan *);
180 static void iwn_read_eeprom_band(struct iwn_softc *, int, int, int *,
181 struct ieee80211_channel[]);
182 static void iwn_read_eeprom_ht40(struct iwn_softc *, int, int, int *,
183 struct ieee80211_channel[]);
184 static void iwn_read_eeprom_channels(struct iwn_softc *, int, uint32_t);
185 static struct iwn_eeprom_chan *iwn_find_eeprom_channel(struct iwn_softc *,
186 struct ieee80211_channel *);
187 static void iwn_getradiocaps(struct ieee80211com *, int, int *,
188 struct ieee80211_channel[]);
189 static int iwn_setregdomain(struct ieee80211com *,
190 struct ieee80211_regdomain *, int,
191 struct ieee80211_channel[]);
192 static void iwn_read_eeprom_enhinfo(struct iwn_softc *);
193 static struct ieee80211_node *iwn_node_alloc(struct ieee80211vap *,
194 const uint8_t mac[IEEE80211_ADDR_LEN]);
195 static void iwn_newassoc(struct ieee80211_node *, int);
196 static int iwn_media_change(struct ifnet *);
197 static int iwn_newstate(struct ieee80211vap *, enum ieee80211_state, int);
198 static void iwn_calib_timeout(void *);
199 static void iwn_rx_phy(struct iwn_softc *, struct iwn_rx_desc *,
200 struct iwn_rx_data *);
201 static void iwn_rx_done(struct iwn_softc *, struct iwn_rx_desc *,
202 struct iwn_rx_data *);
203 static void iwn_rx_compressed_ba(struct iwn_softc *, struct iwn_rx_desc *,
204 struct iwn_rx_data *);
205 static void iwn5000_rx_calib_results(struct iwn_softc *,
206 struct iwn_rx_desc *, struct iwn_rx_data *);
207 static void iwn_rx_statistics(struct iwn_softc *, struct iwn_rx_desc *,
208 struct iwn_rx_data *);
209 static void iwn4965_tx_done(struct iwn_softc *, struct iwn_rx_desc *,
210 struct iwn_rx_data *);
211 static void iwn5000_tx_done(struct iwn_softc *, struct iwn_rx_desc *,
212 struct iwn_rx_data *);
213 static void iwn_tx_done(struct iwn_softc *, struct iwn_rx_desc *, int, int,
215 static void iwn_ampdu_tx_done(struct iwn_softc *, int, int, int, int, int,
217 static void iwn_cmd_done(struct iwn_softc *, struct iwn_rx_desc *);
218 static void iwn_notif_intr(struct iwn_softc *);
219 static void iwn_wakeup_intr(struct iwn_softc *);
220 static void iwn_rftoggle_task(void *, int);
221 static void iwn_fatal_intr(struct iwn_softc *);
222 static void iwn_intr(void *);
223 static void iwn4965_update_sched(struct iwn_softc *, int, int, uint8_t,
225 static void iwn5000_update_sched(struct iwn_softc *, int, int, uint8_t,
228 static void iwn5000_reset_sched(struct iwn_softc *, int, int);
230 static int iwn_tx_data(struct iwn_softc *, struct mbuf *,
231 struct ieee80211_node *);
232 static int iwn_tx_data_raw(struct iwn_softc *, struct mbuf *,
233 struct ieee80211_node *,
234 const struct ieee80211_bpf_params *params);
235 static void iwn_xmit_task(void *arg0, int pending);
236 static int iwn_raw_xmit(struct ieee80211_node *, struct mbuf *,
237 const struct ieee80211_bpf_params *);
238 static int iwn_transmit(struct ieee80211com *, struct mbuf *);
239 static void iwn_scan_timeout(void *);
240 static void iwn_watchdog(void *);
241 static int iwn_ioctl(struct ieee80211com *, u_long , void *);
242 static void iwn_parent(struct ieee80211com *);
243 static int iwn_cmd(struct iwn_softc *, int, const void *, int, int);
244 static int iwn4965_add_node(struct iwn_softc *, struct iwn_node_info *,
246 static int iwn5000_add_node(struct iwn_softc *, struct iwn_node_info *,
248 static int iwn_set_link_quality(struct iwn_softc *,
249 struct ieee80211_node *);
250 static int iwn_add_broadcast_node(struct iwn_softc *, int);
251 static int iwn_updateedca(struct ieee80211com *);
252 static void iwn_set_promisc(struct iwn_softc *);
253 static void iwn_update_promisc(struct ieee80211com *);
254 static void iwn_update_mcast(struct ieee80211com *);
255 static void iwn_set_led(struct iwn_softc *, uint8_t, uint8_t, uint8_t);
256 static int iwn_set_critical_temp(struct iwn_softc *);
257 static int iwn_set_timing(struct iwn_softc *, struct ieee80211_node *);
258 static void iwn4965_power_calibration(struct iwn_softc *, int);
259 static int iwn4965_set_txpower(struct iwn_softc *, int);
260 static int iwn5000_set_txpower(struct iwn_softc *, int);
261 static int iwn4965_get_rssi(struct iwn_softc *, struct iwn_rx_stat *);
262 static int iwn5000_get_rssi(struct iwn_softc *, struct iwn_rx_stat *);
263 static int iwn_get_noise(const struct iwn_rx_general_stats *);
264 static int iwn4965_get_temperature(struct iwn_softc *);
265 static int iwn5000_get_temperature(struct iwn_softc *);
266 static int iwn_init_sensitivity(struct iwn_softc *);
267 static void iwn_collect_noise(struct iwn_softc *,
268 const struct iwn_rx_general_stats *);
269 static int iwn4965_init_gains(struct iwn_softc *);
270 static int iwn5000_init_gains(struct iwn_softc *);
271 static int iwn4965_set_gains(struct iwn_softc *);
272 static int iwn5000_set_gains(struct iwn_softc *);
273 static void iwn_tune_sensitivity(struct iwn_softc *,
274 const struct iwn_rx_stats *);
275 static void iwn_save_stats_counters(struct iwn_softc *,
276 const struct iwn_stats *);
277 static int iwn_send_sensitivity(struct iwn_softc *);
278 static void iwn_check_rx_recovery(struct iwn_softc *, struct iwn_stats *);
279 static int iwn_set_pslevel(struct iwn_softc *, int, int, int);
280 static int iwn_send_btcoex(struct iwn_softc *);
281 static int iwn_send_advanced_btcoex(struct iwn_softc *);
282 static int iwn5000_runtime_calib(struct iwn_softc *);
283 static int iwn_check_bss_filter(struct iwn_softc *);
284 static int iwn4965_rxon_assoc(struct iwn_softc *, int);
285 static int iwn5000_rxon_assoc(struct iwn_softc *, int);
286 static int iwn_send_rxon(struct iwn_softc *, int, int);
287 static int iwn_config(struct iwn_softc *);
288 static int iwn_scan(struct iwn_softc *, struct ieee80211vap *,
289 struct ieee80211_scan_state *, struct ieee80211_channel *);
290 static int iwn_auth(struct iwn_softc *, struct ieee80211vap *vap);
291 static int iwn_run(struct iwn_softc *, struct ieee80211vap *vap);
292 static int iwn_ampdu_rx_start(struct ieee80211_node *,
293 struct ieee80211_rx_ampdu *, int, int, int);
294 static void iwn_ampdu_rx_stop(struct ieee80211_node *,
295 struct ieee80211_rx_ampdu *);
296 static int iwn_addba_request(struct ieee80211_node *,
297 struct ieee80211_tx_ampdu *, int, int, int);
298 static int iwn_addba_response(struct ieee80211_node *,
299 struct ieee80211_tx_ampdu *, int, int, int);
300 static int iwn_ampdu_tx_start(struct ieee80211com *,
301 struct ieee80211_node *, uint8_t);
302 static void iwn_ampdu_tx_stop(struct ieee80211_node *,
303 struct ieee80211_tx_ampdu *);
304 static void iwn4965_ampdu_tx_start(struct iwn_softc *,
305 struct ieee80211_node *, int, uint8_t, uint16_t);
306 static void iwn4965_ampdu_tx_stop(struct iwn_softc *, int,
308 static void iwn5000_ampdu_tx_start(struct iwn_softc *,
309 struct ieee80211_node *, int, uint8_t, uint16_t);
310 static void iwn5000_ampdu_tx_stop(struct iwn_softc *, int,
312 static int iwn5000_query_calibration(struct iwn_softc *);
313 static int iwn5000_send_calibration(struct iwn_softc *);
314 static int iwn5000_send_wimax_coex(struct iwn_softc *);
315 static int iwn5000_crystal_calib(struct iwn_softc *);
316 static int iwn5000_temp_offset_calib(struct iwn_softc *);
317 static int iwn5000_temp_offset_calibv2(struct iwn_softc *);
318 static int iwn4965_post_alive(struct iwn_softc *);
319 static int iwn5000_post_alive(struct iwn_softc *);
320 static int iwn4965_load_bootcode(struct iwn_softc *, const uint8_t *,
322 static int iwn4965_load_firmware(struct iwn_softc *);
323 static int iwn5000_load_firmware_section(struct iwn_softc *, uint32_t,
324 const uint8_t *, int);
325 static int iwn5000_load_firmware(struct iwn_softc *);
326 static int iwn_read_firmware_leg(struct iwn_softc *,
327 struct iwn_fw_info *);
328 static int iwn_read_firmware_tlv(struct iwn_softc *,
329 struct iwn_fw_info *, uint16_t);
330 static int iwn_read_firmware(struct iwn_softc *);
331 static void iwn_unload_firmware(struct iwn_softc *);
332 static int iwn_clock_wait(struct iwn_softc *);
333 static int iwn_apm_init(struct iwn_softc *);
334 static void iwn_apm_stop_master(struct iwn_softc *);
335 static void iwn_apm_stop(struct iwn_softc *);
336 static int iwn4965_nic_config(struct iwn_softc *);
337 static int iwn5000_nic_config(struct iwn_softc *);
338 static int iwn_hw_prepare(struct iwn_softc *);
339 static int iwn_hw_init(struct iwn_softc *);
340 static void iwn_hw_stop(struct iwn_softc *);
341 static void iwn_panicked(void *, int);
342 static int iwn_init_locked(struct iwn_softc *);
343 static int iwn_init(struct iwn_softc *);
344 static void iwn_stop_locked(struct iwn_softc *);
345 static void iwn_stop(struct iwn_softc *);
346 static void iwn_scan_start(struct ieee80211com *);
347 static void iwn_scan_end(struct ieee80211com *);
348 static void iwn_set_channel(struct ieee80211com *);
349 static void iwn_scan_curchan(struct ieee80211_scan_state *, unsigned long);
350 static void iwn_scan_mindwell(struct ieee80211_scan_state *);
352 static char *iwn_get_csr_string(int);
353 static void iwn_debug_register(struct iwn_softc *);
356 static device_method_t iwn_methods[] = {
357 /* Device interface */
358 DEVMETHOD(device_probe, iwn_probe),
359 DEVMETHOD(device_attach, iwn_attach),
360 DEVMETHOD(device_detach, iwn_detach),
361 DEVMETHOD(device_shutdown, iwn_shutdown),
362 DEVMETHOD(device_suspend, iwn_suspend),
363 DEVMETHOD(device_resume, iwn_resume),
368 static driver_t iwn_driver = {
371 sizeof(struct iwn_softc)
373 static devclass_t iwn_devclass;
375 DRIVER_MODULE(iwn, pci, iwn_driver, iwn_devclass, NULL, NULL);
377 MODULE_VERSION(iwn, 1);
379 MODULE_DEPEND(iwn, firmware, 1, 1, 1);
380 MODULE_DEPEND(iwn, pci, 1, 1, 1);
381 MODULE_DEPEND(iwn, wlan, 1, 1, 1);
383 static d_ioctl_t iwn_cdev_ioctl;
384 static d_open_t iwn_cdev_open;
385 static d_close_t iwn_cdev_close;
387 static struct cdevsw iwn_cdevsw = {
388 .d_version = D_VERSION,
390 .d_open = iwn_cdev_open,
391 .d_close = iwn_cdev_close,
392 .d_ioctl = iwn_cdev_ioctl,
397 iwn_probe(device_t dev)
399 const struct iwn_ident *ident;
401 for (ident = iwn_ident_table; ident->name != NULL; ident++) {
402 if (pci_get_vendor(dev) == ident->vendor &&
403 pci_get_device(dev) == ident->device) {
404 device_set_desc(dev, ident->name);
405 return (BUS_PROBE_DEFAULT);
412 iwn_is_3stream_device(struct iwn_softc *sc)
414 /* XXX for now only 5300, until the 5350 can be tested */
415 if (sc->hw_type == IWN_HW_REV_TYPE_5300)
421 iwn_attach(device_t dev)
423 struct iwn_softc *sc = device_get_softc(dev);
424 struct ieee80211com *ic;
430 error = resource_int_value(device_get_name(sc->sc_dev),
431 device_get_unit(sc->sc_dev), "debug", &(sc->sc_debug));
438 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: begin\n",__func__);
441 * Get the offset of the PCI Express Capability Structure in PCI
442 * Configuration Space.
444 error = pci_find_cap(dev, PCIY_EXPRESS, &sc->sc_cap_off);
446 device_printf(dev, "PCIe capability structure not found!\n");
450 /* Clear device-specific "PCI retry timeout" register (41h). */
451 pci_write_config(dev, 0x41, 0, 1);
453 /* Enable bus-mastering. */
454 pci_enable_busmaster(dev);
457 sc->mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
459 if (sc->mem == NULL) {
460 device_printf(dev, "can't map mem space\n");
464 sc->sc_st = rman_get_bustag(sc->mem);
465 sc->sc_sh = rman_get_bushandle(sc->mem);
469 if (pci_alloc_msi(dev, &i) == 0)
471 /* Install interrupt handler. */
472 sc->irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE |
473 (rid != 0 ? 0 : RF_SHAREABLE));
474 if (sc->irq == NULL) {
475 device_printf(dev, "can't map interrupt\n");
482 /* Read hardware revision and attach. */
483 sc->hw_type = (IWN_READ(sc, IWN_HW_REV) >> IWN_HW_REV_TYPE_SHIFT)
484 & IWN_HW_REV_TYPE_MASK;
485 sc->subdevice_id = pci_get_subdevice(dev);
488 * 4965 versus 5000 and later have different methods.
489 * Let's set those up first.
491 if (sc->hw_type == IWN_HW_REV_TYPE_4965)
492 error = iwn4965_attach(sc, pci_get_device(dev));
494 error = iwn5000_attach(sc, pci_get_device(dev));
496 device_printf(dev, "could not attach device, error %d\n",
502 * Next, let's setup the various parameters of each NIC.
504 error = iwn_config_specific(sc, pci_get_device(dev));
506 device_printf(dev, "could not attach device, error %d\n",
511 if ((error = iwn_hw_prepare(sc)) != 0) {
512 device_printf(dev, "hardware not ready, error %d\n", error);
516 /* Allocate DMA memory for firmware transfers. */
517 if ((error = iwn_alloc_fwmem(sc)) != 0) {
519 "could not allocate memory for firmware, error %d\n",
524 /* Allocate "Keep Warm" page. */
525 if ((error = iwn_alloc_kw(sc)) != 0) {
527 "could not allocate keep warm page, error %d\n", error);
531 /* Allocate ICT table for 5000 Series. */
532 if (sc->hw_type != IWN_HW_REV_TYPE_4965 &&
533 (error = iwn_alloc_ict(sc)) != 0) {
534 device_printf(dev, "could not allocate ICT table, error %d\n",
539 /* Allocate TX scheduler "rings". */
540 if ((error = iwn_alloc_sched(sc)) != 0) {
542 "could not allocate TX scheduler rings, error %d\n", error);
546 /* Allocate TX rings (16 on 4965AGN, 20 on >=5000). */
547 for (i = 0; i < sc->ntxqs; i++) {
548 if ((error = iwn_alloc_tx_ring(sc, &sc->txq[i], i)) != 0) {
550 "could not allocate TX ring %d, error %d\n", i,
556 /* Allocate RX ring. */
557 if ((error = iwn_alloc_rx_ring(sc, &sc->rxq)) != 0) {
558 device_printf(dev, "could not allocate RX ring, error %d\n",
563 /* Clear pending interrupts. */
564 IWN_WRITE(sc, IWN_INT, 0xffffffff);
568 ic->ic_name = device_get_nameunit(dev);
569 ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */
570 ic->ic_opmode = IEEE80211_M_STA; /* default to BSS mode */
572 /* Set device capabilities. */
574 IEEE80211_C_STA /* station mode supported */
575 | IEEE80211_C_MONITOR /* monitor mode supported */
577 | IEEE80211_C_BGSCAN /* background scanning */
579 | IEEE80211_C_TXPMGT /* tx power management */
580 | IEEE80211_C_SHSLOT /* short slot time supported */
582 | IEEE80211_C_SHPREAMBLE /* short preamble supported */
584 | IEEE80211_C_IBSS /* ibss/adhoc mode */
586 | IEEE80211_C_WME /* WME */
587 | IEEE80211_C_PMGT /* Station-side power mgmt */
590 /* Read MAC address, channels, etc from EEPROM. */
591 if ((error = iwn_read_eeprom(sc, ic->ic_macaddr)) != 0) {
592 device_printf(dev, "could not read EEPROM, error %d\n",
597 /* Count the number of available chains. */
599 ((sc->txchainmask >> 2) & 1) +
600 ((sc->txchainmask >> 1) & 1) +
601 ((sc->txchainmask >> 0) & 1);
603 ((sc->rxchainmask >> 2) & 1) +
604 ((sc->rxchainmask >> 1) & 1) +
605 ((sc->rxchainmask >> 0) & 1);
607 device_printf(dev, "MIMO %dT%dR, %.4s, address %6D\n",
608 sc->ntxchains, sc->nrxchains, sc->eeprom_domain,
609 ic->ic_macaddr, ":");
612 if (sc->sc_flags & IWN_FLAG_HAS_11N) {
613 ic->ic_rxstream = sc->nrxchains;
614 ic->ic_txstream = sc->ntxchains;
617 * Some of the 3 antenna devices (ie, the 4965) only supports
618 * 2x2 operation. So correct the number of streams if
619 * it's not a 3-stream device.
621 if (! iwn_is_3stream_device(sc)) {
622 if (ic->ic_rxstream > 2)
624 if (ic->ic_txstream > 2)
629 IEEE80211_HTCAP_SMPS_OFF /* SMPS mode disabled */
630 | IEEE80211_HTCAP_SHORTGI20 /* short GI in 20MHz */
631 | IEEE80211_HTCAP_CHWIDTH40 /* 40MHz channel width*/
632 | IEEE80211_HTCAP_SHORTGI40 /* short GI in 40MHz */
634 | IEEE80211_HTCAP_GREENFIELD
635 #if IWN_RBUF_SIZE == 8192
636 | IEEE80211_HTCAP_MAXAMSDU_7935 /* max A-MSDU length */
638 | IEEE80211_HTCAP_MAXAMSDU_3839 /* max A-MSDU length */
641 /* s/w capabilities */
642 | IEEE80211_HTC_HT /* HT operation */
643 | IEEE80211_HTC_AMPDU /* tx A-MPDU */
645 | IEEE80211_HTC_AMSDU /* tx A-MSDU */
650 ieee80211_ifattach(ic);
651 ic->ic_vap_create = iwn_vap_create;
652 ic->ic_ioctl = iwn_ioctl;
653 ic->ic_parent = iwn_parent;
654 ic->ic_vap_delete = iwn_vap_delete;
655 ic->ic_transmit = iwn_transmit;
656 ic->ic_raw_xmit = iwn_raw_xmit;
657 ic->ic_node_alloc = iwn_node_alloc;
658 sc->sc_ampdu_rx_start = ic->ic_ampdu_rx_start;
659 ic->ic_ampdu_rx_start = iwn_ampdu_rx_start;
660 sc->sc_ampdu_rx_stop = ic->ic_ampdu_rx_stop;
661 ic->ic_ampdu_rx_stop = iwn_ampdu_rx_stop;
662 sc->sc_addba_request = ic->ic_addba_request;
663 ic->ic_addba_request = iwn_addba_request;
664 sc->sc_addba_response = ic->ic_addba_response;
665 ic->ic_addba_response = iwn_addba_response;
666 sc->sc_addba_stop = ic->ic_addba_stop;
667 ic->ic_addba_stop = iwn_ampdu_tx_stop;
668 ic->ic_newassoc = iwn_newassoc;
669 ic->ic_wme.wme_update = iwn_updateedca;
670 ic->ic_update_promisc = iwn_update_promisc;
671 ic->ic_update_mcast = iwn_update_mcast;
672 ic->ic_scan_start = iwn_scan_start;
673 ic->ic_scan_end = iwn_scan_end;
674 ic->ic_set_channel = iwn_set_channel;
675 ic->ic_scan_curchan = iwn_scan_curchan;
676 ic->ic_scan_mindwell = iwn_scan_mindwell;
677 ic->ic_getradiocaps = iwn_getradiocaps;
678 ic->ic_setregdomain = iwn_setregdomain;
680 iwn_radiotap_attach(sc);
682 callout_init_mtx(&sc->calib_to, &sc->sc_mtx, 0);
683 callout_init_mtx(&sc->scan_timeout, &sc->sc_mtx, 0);
684 callout_init_mtx(&sc->watchdog_to, &sc->sc_mtx, 0);
685 TASK_INIT(&sc->sc_rftoggle_task, 0, iwn_rftoggle_task, sc);
686 TASK_INIT(&sc->sc_panic_task, 0, iwn_panicked, sc);
687 TASK_INIT(&sc->sc_xmit_task, 0, iwn_xmit_task, sc);
689 mbufq_init(&sc->sc_xmit_queue, 1024);
691 sc->sc_tq = taskqueue_create("iwn_taskq", M_WAITOK,
692 taskqueue_thread_enqueue, &sc->sc_tq);
693 error = taskqueue_start_threads(&sc->sc_tq, 1, 0, "iwn_taskq");
695 device_printf(dev, "can't start threads, error %d\n", error);
699 iwn_sysctlattach(sc);
702 * Hook our interrupt after all initialization is complete.
704 error = bus_setup_intr(dev, sc->irq, INTR_TYPE_NET | INTR_MPSAFE,
705 NULL, iwn_intr, sc, &sc->sc_ih);
707 device_printf(dev, "can't establish interrupt, error %d\n",
713 device_printf(sc->sc_dev, "%s: rx_stats=%d, rx_stats_bt=%d\n",
715 sizeof(struct iwn_stats),
716 sizeof(struct iwn_stats_bt));
720 ieee80211_announce(ic);
721 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__);
723 /* Add debug ioctl right at the end */
724 sc->sc_cdev = make_dev(&iwn_cdevsw, device_get_unit(dev),
725 UID_ROOT, GID_WHEEL, 0600, "%s", device_get_nameunit(dev));
726 if (sc->sc_cdev == NULL) {
727 device_printf(dev, "failed to create debug character device\n");
729 sc->sc_cdev->si_drv1 = sc;
734 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end in error\n",__func__);
739 * Define specific configuration based on device id and subdevice id
740 * pid : PCI device id
743 iwn_config_specific(struct iwn_softc *sc, uint16_t pid)
752 sc->base_params = &iwn4965_base_params;
753 sc->limits = &iwn4965_sensitivity_limits;
754 sc->fwname = "iwn4965fw";
755 /* Override chains masks, ROM is known to be broken. */
756 sc->txchainmask = IWN_ANT_AB;
757 sc->rxchainmask = IWN_ANT_ABC;
758 /* Enable normal btcoex */
759 sc->sc_flags |= IWN_FLAG_BTCOEX;
764 switch(sc->subdevice_id) {
765 case IWN_SDID_1000_1:
766 case IWN_SDID_1000_2:
767 case IWN_SDID_1000_3:
768 case IWN_SDID_1000_4:
769 case IWN_SDID_1000_5:
770 case IWN_SDID_1000_6:
771 case IWN_SDID_1000_7:
772 case IWN_SDID_1000_8:
773 case IWN_SDID_1000_9:
774 case IWN_SDID_1000_10:
775 case IWN_SDID_1000_11:
776 case IWN_SDID_1000_12:
777 sc->limits = &iwn1000_sensitivity_limits;
778 sc->base_params = &iwn1000_base_params;
779 sc->fwname = "iwn1000fw";
782 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :"
783 "0x%04x rev %d not supported (subdevice)\n", pid,
784 sc->subdevice_id,sc->hw_type);
793 sc->fwname = "iwn6000fw";
794 sc->limits = &iwn6000_sensitivity_limits;
795 switch(sc->subdevice_id) {
796 case IWN_SDID_6x00_1:
797 case IWN_SDID_6x00_2:
798 case IWN_SDID_6x00_8:
800 sc->base_params = &iwn_6000_base_params;
802 case IWN_SDID_6x00_3:
803 case IWN_SDID_6x00_6:
804 case IWN_SDID_6x00_9:
806 case IWN_SDID_6x00_4:
807 case IWN_SDID_6x00_7:
808 case IWN_SDID_6x00_10:
810 case IWN_SDID_6x00_5:
812 sc->base_params = &iwn_6000i_base_params;
813 sc->sc_flags |= IWN_FLAG_INTERNAL_PA;
814 sc->txchainmask = IWN_ANT_BC;
815 sc->rxchainmask = IWN_ANT_BC;
818 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :"
819 "0x%04x rev %d not supported (subdevice)\n", pid,
820 sc->subdevice_id,sc->hw_type);
827 switch(sc->subdevice_id) {
828 case IWN_SDID_6x05_1:
829 case IWN_SDID_6x05_4:
830 case IWN_SDID_6x05_6:
832 case IWN_SDID_6x05_2:
833 case IWN_SDID_6x05_5:
834 case IWN_SDID_6x05_7:
836 case IWN_SDID_6x05_3:
838 case IWN_SDID_6x05_8:
839 case IWN_SDID_6x05_9:
840 //iwl6005_2agn_sff_cfg
841 case IWN_SDID_6x05_10:
843 case IWN_SDID_6x05_11:
844 //iwl6005_2agn_mow1_cfg
845 case IWN_SDID_6x05_12:
846 //iwl6005_2agn_mow2_cfg
847 sc->fwname = "iwn6000g2afw";
848 sc->limits = &iwn6000_sensitivity_limits;
849 sc->base_params = &iwn_6000g2_base_params;
852 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :"
853 "0x%04x rev %d not supported (subdevice)\n", pid,
854 sc->subdevice_id,sc->hw_type);
861 switch(sc->subdevice_id) {
862 case IWN_SDID_6035_1:
863 case IWN_SDID_6035_2:
864 case IWN_SDID_6035_3:
865 case IWN_SDID_6035_4:
866 sc->fwname = "iwn6000g2bfw";
867 sc->limits = &iwn6235_sensitivity_limits;
868 sc->base_params = &iwn_6235_base_params;
871 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :"
872 "0x%04x rev %d not supported (subdevice)\n", pid,
873 sc->subdevice_id,sc->hw_type);
877 /* 6x50 WiFi/WiMax Series */
880 switch(sc->subdevice_id) {
881 case IWN_SDID_6050_1:
882 case IWN_SDID_6050_3:
883 case IWN_SDID_6050_5:
885 case IWN_SDID_6050_2:
886 case IWN_SDID_6050_4:
887 case IWN_SDID_6050_6:
889 sc->fwname = "iwn6050fw";
890 sc->txchainmask = IWN_ANT_AB;
891 sc->rxchainmask = IWN_ANT_AB;
892 sc->limits = &iwn6000_sensitivity_limits;
893 sc->base_params = &iwn_6050_base_params;
896 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :"
897 "0x%04x rev %d not supported (subdevice)\n", pid,
898 sc->subdevice_id,sc->hw_type);
902 /* 6150 WiFi/WiMax Series */
905 switch(sc->subdevice_id) {
906 case IWN_SDID_6150_1:
907 case IWN_SDID_6150_3:
908 case IWN_SDID_6150_5:
910 case IWN_SDID_6150_2:
911 case IWN_SDID_6150_4:
912 case IWN_SDID_6150_6:
914 sc->fwname = "iwn6050fw";
915 sc->limits = &iwn6000_sensitivity_limits;
916 sc->base_params = &iwn_6150_base_params;
919 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :"
920 "0x%04x rev %d not supported (subdevice)\n", pid,
921 sc->subdevice_id,sc->hw_type);
925 /* 6030 Series and 1030 Series */
930 switch(sc->subdevice_id) {
931 case IWN_SDID_x030_1:
932 case IWN_SDID_x030_3:
933 case IWN_SDID_x030_5:
935 case IWN_SDID_x030_2:
936 case IWN_SDID_x030_4:
937 case IWN_SDID_x030_6:
939 case IWN_SDID_x030_7:
940 case IWN_SDID_x030_10:
941 case IWN_SDID_x030_14:
943 case IWN_SDID_x030_8:
944 case IWN_SDID_x030_11:
945 case IWN_SDID_x030_15:
947 case IWN_SDID_x030_9:
948 case IWN_SDID_x030_12:
949 case IWN_SDID_x030_16:
951 case IWN_SDID_x030_13:
953 sc->fwname = "iwn6000g2bfw";
954 sc->limits = &iwn6000_sensitivity_limits;
955 sc->base_params = &iwn_6000g2b_base_params;
958 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :"
959 "0x%04x rev %d not supported (subdevice)\n", pid,
960 sc->subdevice_id,sc->hw_type);
964 /* 130 Series WiFi */
965 /* XXX: This series will need adjustment for rate.
966 * see rx_with_siso_diversity in linux kernel
970 switch(sc->subdevice_id) {
979 sc->fwname = "iwn6000g2bfw";
980 sc->limits = &iwn6000_sensitivity_limits;
981 sc->base_params = &iwn_6000g2b_base_params;
984 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :"
985 "0x%04x rev %d not supported (subdevice)\n", pid,
986 sc->subdevice_id,sc->hw_type);
990 /* 100 Series WiFi */
993 switch(sc->subdevice_id) {
1000 sc->limits = &iwn1000_sensitivity_limits;
1001 sc->base_params = &iwn1000_base_params;
1002 sc->fwname = "iwn100fw";
1005 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :"
1006 "0x%04x rev %d not supported (subdevice)\n", pid,
1007 sc->subdevice_id,sc->hw_type);
1013 /* XXX: This series will need adjustment for rate.
1014 * see rx_with_siso_diversity in linux kernel
1018 switch(sc->subdevice_id) {
1019 case IWN_SDID_105_1:
1020 case IWN_SDID_105_2:
1021 case IWN_SDID_105_3:
1023 case IWN_SDID_105_4:
1025 sc->limits = &iwn2030_sensitivity_limits;
1026 sc->base_params = &iwn2000_base_params;
1027 sc->fwname = "iwn105fw";
1030 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :"
1031 "0x%04x rev %d not supported (subdevice)\n", pid,
1032 sc->subdevice_id,sc->hw_type);
1038 /* XXX: This series will need adjustment for rate.
1039 * see rx_with_siso_diversity in linux kernel
1043 switch(sc->subdevice_id) {
1044 case IWN_SDID_135_1:
1045 case IWN_SDID_135_2:
1046 case IWN_SDID_135_3:
1047 sc->limits = &iwn2030_sensitivity_limits;
1048 sc->base_params = &iwn2030_base_params;
1049 sc->fwname = "iwn135fw";
1052 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :"
1053 "0x%04x rev %d not supported (subdevice)\n", pid,
1054 sc->subdevice_id,sc->hw_type);
1060 case IWN_DID_2x00_1:
1061 case IWN_DID_2x00_2:
1062 switch(sc->subdevice_id) {
1063 case IWN_SDID_2x00_1:
1064 case IWN_SDID_2x00_2:
1065 case IWN_SDID_2x00_3:
1067 case IWN_SDID_2x00_4:
1068 //iwl2000_2bgn_d_cfg
1069 sc->limits = &iwn2030_sensitivity_limits;
1070 sc->base_params = &iwn2000_base_params;
1071 sc->fwname = "iwn2000fw";
1074 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :"
1075 "0x%04x rev %d not supported (subdevice) \n",
1076 pid, sc->subdevice_id, sc->hw_type);
1081 case IWN_DID_2x30_1:
1082 case IWN_DID_2x30_2:
1083 switch(sc->subdevice_id) {
1084 case IWN_SDID_2x30_1:
1085 case IWN_SDID_2x30_3:
1086 case IWN_SDID_2x30_5:
1088 case IWN_SDID_2x30_2:
1089 case IWN_SDID_2x30_4:
1090 case IWN_SDID_2x30_6:
1092 sc->limits = &iwn2030_sensitivity_limits;
1093 sc->base_params = &iwn2030_base_params;
1094 sc->fwname = "iwn2030fw";
1097 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :"
1098 "0x%04x rev %d not supported (subdevice)\n", pid,
1099 sc->subdevice_id,sc->hw_type);
1104 case IWN_DID_5x00_1:
1105 case IWN_DID_5x00_2:
1106 case IWN_DID_5x00_3:
1107 case IWN_DID_5x00_4:
1108 sc->limits = &iwn5000_sensitivity_limits;
1109 sc->base_params = &iwn5000_base_params;
1110 sc->fwname = "iwn5000fw";
1111 switch(sc->subdevice_id) {
1112 case IWN_SDID_5x00_1:
1113 case IWN_SDID_5x00_2:
1114 case IWN_SDID_5x00_3:
1115 case IWN_SDID_5x00_4:
1116 case IWN_SDID_5x00_9:
1117 case IWN_SDID_5x00_10:
1118 case IWN_SDID_5x00_11:
1119 case IWN_SDID_5x00_12:
1120 case IWN_SDID_5x00_17:
1121 case IWN_SDID_5x00_18:
1122 case IWN_SDID_5x00_19:
1123 case IWN_SDID_5x00_20:
1125 sc->txchainmask = IWN_ANT_B;
1126 sc->rxchainmask = IWN_ANT_AB;
1128 case IWN_SDID_5x00_5:
1129 case IWN_SDID_5x00_6:
1130 case IWN_SDID_5x00_13:
1131 case IWN_SDID_5x00_14:
1132 case IWN_SDID_5x00_21:
1133 case IWN_SDID_5x00_22:
1135 sc->txchainmask = IWN_ANT_B;
1136 sc->rxchainmask = IWN_ANT_AB;
1138 case IWN_SDID_5x00_7:
1139 case IWN_SDID_5x00_8:
1140 case IWN_SDID_5x00_15:
1141 case IWN_SDID_5x00_16:
1142 case IWN_SDID_5x00_23:
1143 case IWN_SDID_5x00_24:
1145 sc->txchainmask = IWN_ANT_B;
1146 sc->rxchainmask = IWN_ANT_AB;
1148 case IWN_SDID_5x00_25:
1149 case IWN_SDID_5x00_26:
1150 case IWN_SDID_5x00_27:
1151 case IWN_SDID_5x00_28:
1152 case IWN_SDID_5x00_29:
1153 case IWN_SDID_5x00_30:
1154 case IWN_SDID_5x00_31:
1155 case IWN_SDID_5x00_32:
1156 case IWN_SDID_5x00_33:
1157 case IWN_SDID_5x00_34:
1158 case IWN_SDID_5x00_35:
1159 case IWN_SDID_5x00_36:
1161 sc->txchainmask = IWN_ANT_ABC;
1162 sc->rxchainmask = IWN_ANT_ABC;
1165 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :"
1166 "0x%04x rev %d not supported (subdevice)\n", pid,
1167 sc->subdevice_id,sc->hw_type);
1172 case IWN_DID_5x50_1:
1173 case IWN_DID_5x50_2:
1174 case IWN_DID_5x50_3:
1175 case IWN_DID_5x50_4:
1176 sc->limits = &iwn5000_sensitivity_limits;
1177 sc->base_params = &iwn5000_base_params;
1178 sc->fwname = "iwn5000fw";
1179 switch(sc->subdevice_id) {
1180 case IWN_SDID_5x50_1:
1181 case IWN_SDID_5x50_2:
1182 case IWN_SDID_5x50_3:
1184 sc->limits = &iwn5000_sensitivity_limits;
1185 sc->base_params = &iwn5000_base_params;
1186 sc->fwname = "iwn5000fw";
1188 case IWN_SDID_5x50_4:
1189 case IWN_SDID_5x50_5:
1190 case IWN_SDID_5x50_8:
1191 case IWN_SDID_5x50_9:
1192 case IWN_SDID_5x50_10:
1193 case IWN_SDID_5x50_11:
1195 case IWN_SDID_5x50_6:
1196 case IWN_SDID_5x50_7:
1197 case IWN_SDID_5x50_12:
1198 case IWN_SDID_5x50_13:
1200 sc->limits = &iwn5000_sensitivity_limits;
1201 sc->fwname = "iwn5150fw";
1202 sc->base_params = &iwn_5x50_base_params;
1205 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :"
1206 "0x%04x rev %d not supported (subdevice)\n", pid,
1207 sc->subdevice_id,sc->hw_type);
1212 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id : 0x%04x"
1213 "rev 0x%08x not supported (device)\n", pid, sc->subdevice_id,
1221 iwn4965_attach(struct iwn_softc *sc, uint16_t pid)
1223 struct iwn_ops *ops = &sc->ops;
1225 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
1226 ops->load_firmware = iwn4965_load_firmware;
1227 ops->read_eeprom = iwn4965_read_eeprom;
1228 ops->post_alive = iwn4965_post_alive;
1229 ops->nic_config = iwn4965_nic_config;
1230 ops->update_sched = iwn4965_update_sched;
1231 ops->get_temperature = iwn4965_get_temperature;
1232 ops->get_rssi = iwn4965_get_rssi;
1233 ops->set_txpower = iwn4965_set_txpower;
1234 ops->init_gains = iwn4965_init_gains;
1235 ops->set_gains = iwn4965_set_gains;
1236 ops->rxon_assoc = iwn4965_rxon_assoc;
1237 ops->add_node = iwn4965_add_node;
1238 ops->tx_done = iwn4965_tx_done;
1239 ops->ampdu_tx_start = iwn4965_ampdu_tx_start;
1240 ops->ampdu_tx_stop = iwn4965_ampdu_tx_stop;
1241 sc->ntxqs = IWN4965_NTXQUEUES;
1242 sc->firstaggqueue = IWN4965_FIRSTAGGQUEUE;
1243 sc->ndmachnls = IWN4965_NDMACHNLS;
1244 sc->broadcast_id = IWN4965_ID_BROADCAST;
1245 sc->rxonsz = IWN4965_RXONSZ;
1246 sc->schedsz = IWN4965_SCHEDSZ;
1247 sc->fw_text_maxsz = IWN4965_FW_TEXT_MAXSZ;
1248 sc->fw_data_maxsz = IWN4965_FW_DATA_MAXSZ;
1249 sc->fwsz = IWN4965_FWSZ;
1250 sc->sched_txfact_addr = IWN4965_SCHED_TXFACT;
1251 sc->limits = &iwn4965_sensitivity_limits;
1252 sc->fwname = "iwn4965fw";
1253 /* Override chains masks, ROM is known to be broken. */
1254 sc->txchainmask = IWN_ANT_AB;
1255 sc->rxchainmask = IWN_ANT_ABC;
1256 /* Enable normal btcoex */
1257 sc->sc_flags |= IWN_FLAG_BTCOEX;
1259 DPRINTF(sc, IWN_DEBUG_TRACE, "%s: end\n",__func__);
1265 iwn5000_attach(struct iwn_softc *sc, uint16_t pid)
1267 struct iwn_ops *ops = &sc->ops;
1269 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
1271 ops->load_firmware = iwn5000_load_firmware;
1272 ops->read_eeprom = iwn5000_read_eeprom;
1273 ops->post_alive = iwn5000_post_alive;
1274 ops->nic_config = iwn5000_nic_config;
1275 ops->update_sched = iwn5000_update_sched;
1276 ops->get_temperature = iwn5000_get_temperature;
1277 ops->get_rssi = iwn5000_get_rssi;
1278 ops->set_txpower = iwn5000_set_txpower;
1279 ops->init_gains = iwn5000_init_gains;
1280 ops->set_gains = iwn5000_set_gains;
1281 ops->rxon_assoc = iwn5000_rxon_assoc;
1282 ops->add_node = iwn5000_add_node;
1283 ops->tx_done = iwn5000_tx_done;
1284 ops->ampdu_tx_start = iwn5000_ampdu_tx_start;
1285 ops->ampdu_tx_stop = iwn5000_ampdu_tx_stop;
1286 sc->ntxqs = IWN5000_NTXQUEUES;
1287 sc->firstaggqueue = IWN5000_FIRSTAGGQUEUE;
1288 sc->ndmachnls = IWN5000_NDMACHNLS;
1289 sc->broadcast_id = IWN5000_ID_BROADCAST;
1290 sc->rxonsz = IWN5000_RXONSZ;
1291 sc->schedsz = IWN5000_SCHEDSZ;
1292 sc->fw_text_maxsz = IWN5000_FW_TEXT_MAXSZ;
1293 sc->fw_data_maxsz = IWN5000_FW_DATA_MAXSZ;
1294 sc->fwsz = IWN5000_FWSZ;
1295 sc->sched_txfact_addr = IWN5000_SCHED_TXFACT;
1296 sc->reset_noise_gain = IWN5000_PHY_CALIB_RESET_NOISE_GAIN;
1297 sc->noise_gain = IWN5000_PHY_CALIB_NOISE_GAIN;
1303 * Attach the interface to 802.11 radiotap.
1306 iwn_radiotap_attach(struct iwn_softc *sc)
1309 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
1310 ieee80211_radiotap_attach(&sc->sc_ic,
1311 &sc->sc_txtap.wt_ihdr, sizeof(sc->sc_txtap),
1312 IWN_TX_RADIOTAP_PRESENT,
1313 &sc->sc_rxtap.wr_ihdr, sizeof(sc->sc_rxtap),
1314 IWN_RX_RADIOTAP_PRESENT);
1315 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__);
1319 iwn_sysctlattach(struct iwn_softc *sc)
1322 struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(sc->sc_dev);
1323 struct sysctl_oid *tree = device_get_sysctl_tree(sc->sc_dev);
1325 SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
1326 "debug", CTLFLAG_RW, &sc->sc_debug, sc->sc_debug,
1327 "control debugging printfs");
1331 static struct ieee80211vap *
1332 iwn_vap_create(struct ieee80211com *ic, const char name[IFNAMSIZ], int unit,
1333 enum ieee80211_opmode opmode, int flags,
1334 const uint8_t bssid[IEEE80211_ADDR_LEN],
1335 const uint8_t mac[IEEE80211_ADDR_LEN])
1337 struct iwn_softc *sc = ic->ic_softc;
1338 struct iwn_vap *ivp;
1339 struct ieee80211vap *vap;
1341 if (!TAILQ_EMPTY(&ic->ic_vaps)) /* only one at a time */
1344 ivp = malloc(sizeof(struct iwn_vap), M_80211_VAP, M_WAITOK | M_ZERO);
1346 ieee80211_vap_setup(ic, vap, name, unit, opmode, flags, bssid);
1347 ivp->ctx = IWN_RXON_BSS_CTX;
1348 vap->iv_bmissthreshold = 10; /* override default */
1349 /* Override with driver methods. */
1350 ivp->iv_newstate = vap->iv_newstate;
1351 vap->iv_newstate = iwn_newstate;
1352 sc->ivap[IWN_RXON_BSS_CTX] = vap;
1354 ieee80211_ratectl_init(vap);
1355 /* Complete setup. */
1356 ieee80211_vap_attach(vap, iwn_media_change, ieee80211_media_status,
1358 ic->ic_opmode = opmode;
1363 iwn_vap_delete(struct ieee80211vap *vap)
1365 struct iwn_vap *ivp = IWN_VAP(vap);
1367 ieee80211_ratectl_deinit(vap);
1368 ieee80211_vap_detach(vap);
1369 free(ivp, M_80211_VAP);
1373 iwn_xmit_queue_drain(struct iwn_softc *sc)
1376 struct ieee80211_node *ni;
1378 IWN_LOCK_ASSERT(sc);
1379 while ((m = mbufq_dequeue(&sc->sc_xmit_queue)) != NULL) {
1380 ni = (struct ieee80211_node *)m->m_pkthdr.rcvif;
1381 ieee80211_free_node(ni);
1387 iwn_xmit_queue_enqueue(struct iwn_softc *sc, struct mbuf *m)
1390 IWN_LOCK_ASSERT(sc);
1391 return (mbufq_enqueue(&sc->sc_xmit_queue, m));
1395 iwn_detach(device_t dev)
1397 struct iwn_softc *sc = device_get_softc(dev);
1400 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
1402 if (sc->sc_ic.ic_softc != NULL) {
1403 /* Free the mbuf queue and node references */
1405 iwn_xmit_queue_drain(sc);
1410 taskqueue_drain_all(sc->sc_tq);
1411 taskqueue_free(sc->sc_tq);
1413 callout_drain(&sc->watchdog_to);
1414 callout_drain(&sc->scan_timeout);
1415 callout_drain(&sc->calib_to);
1416 ieee80211_ifdetach(&sc->sc_ic);
1419 /* Uninstall interrupt handler. */
1420 if (sc->irq != NULL) {
1421 bus_teardown_intr(dev, sc->irq, sc->sc_ih);
1422 bus_release_resource(dev, SYS_RES_IRQ, rman_get_rid(sc->irq),
1424 pci_release_msi(dev);
1427 /* Free DMA resources. */
1428 iwn_free_rx_ring(sc, &sc->rxq);
1429 for (qid = 0; qid < sc->ntxqs; qid++)
1430 iwn_free_tx_ring(sc, &sc->txq[qid]);
1433 if (sc->ict != NULL)
1437 if (sc->mem != NULL)
1438 bus_release_resource(dev, SYS_RES_MEMORY,
1439 rman_get_rid(sc->mem), sc->mem);
1442 destroy_dev(sc->sc_cdev);
1446 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n", __func__);
1447 IWN_LOCK_DESTROY(sc);
1452 iwn_shutdown(device_t dev)
1454 struct iwn_softc *sc = device_get_softc(dev);
1461 iwn_suspend(device_t dev)
1463 struct iwn_softc *sc = device_get_softc(dev);
1465 ieee80211_suspend_all(&sc->sc_ic);
1470 iwn_resume(device_t dev)
1472 struct iwn_softc *sc = device_get_softc(dev);
1474 /* Clear device-specific "PCI retry timeout" register (41h). */
1475 pci_write_config(dev, 0x41, 0, 1);
1477 ieee80211_resume_all(&sc->sc_ic);
1482 iwn_nic_lock(struct iwn_softc *sc)
1486 /* Request exclusive access to NIC. */
1487 IWN_SETBITS(sc, IWN_GP_CNTRL, IWN_GP_CNTRL_MAC_ACCESS_REQ);
1489 /* Spin until we actually get the lock. */
1490 for (ntries = 0; ntries < 1000; ntries++) {
1491 if ((IWN_READ(sc, IWN_GP_CNTRL) &
1492 (IWN_GP_CNTRL_MAC_ACCESS_ENA | IWN_GP_CNTRL_SLEEP)) ==
1493 IWN_GP_CNTRL_MAC_ACCESS_ENA)
1500 static __inline void
1501 iwn_nic_unlock(struct iwn_softc *sc)
1503 IWN_CLRBITS(sc, IWN_GP_CNTRL, IWN_GP_CNTRL_MAC_ACCESS_REQ);
1506 static __inline uint32_t
1507 iwn_prph_read(struct iwn_softc *sc, uint32_t addr)
1509 IWN_WRITE(sc, IWN_PRPH_RADDR, IWN_PRPH_DWORD | addr);
1510 IWN_BARRIER_READ_WRITE(sc);
1511 return IWN_READ(sc, IWN_PRPH_RDATA);
1514 static __inline void
1515 iwn_prph_write(struct iwn_softc *sc, uint32_t addr, uint32_t data)
1517 IWN_WRITE(sc, IWN_PRPH_WADDR, IWN_PRPH_DWORD | addr);
1518 IWN_BARRIER_WRITE(sc);
1519 IWN_WRITE(sc, IWN_PRPH_WDATA, data);
1522 static __inline void
1523 iwn_prph_setbits(struct iwn_softc *sc, uint32_t addr, uint32_t mask)
1525 iwn_prph_write(sc, addr, iwn_prph_read(sc, addr) | mask);
1528 static __inline void
1529 iwn_prph_clrbits(struct iwn_softc *sc, uint32_t addr, uint32_t mask)
1531 iwn_prph_write(sc, addr, iwn_prph_read(sc, addr) & ~mask);
1534 static __inline void
1535 iwn_prph_write_region_4(struct iwn_softc *sc, uint32_t addr,
1536 const uint32_t *data, int count)
1538 for (; count > 0; count--, data++, addr += 4)
1539 iwn_prph_write(sc, addr, *data);
1542 static __inline uint32_t
1543 iwn_mem_read(struct iwn_softc *sc, uint32_t addr)
1545 IWN_WRITE(sc, IWN_MEM_RADDR, addr);
1546 IWN_BARRIER_READ_WRITE(sc);
1547 return IWN_READ(sc, IWN_MEM_RDATA);
1550 static __inline void
1551 iwn_mem_write(struct iwn_softc *sc, uint32_t addr, uint32_t data)
1553 IWN_WRITE(sc, IWN_MEM_WADDR, addr);
1554 IWN_BARRIER_WRITE(sc);
1555 IWN_WRITE(sc, IWN_MEM_WDATA, data);
1558 static __inline void
1559 iwn_mem_write_2(struct iwn_softc *sc, uint32_t addr, uint16_t data)
1563 tmp = iwn_mem_read(sc, addr & ~3);
1565 tmp = (tmp & 0x0000ffff) | data << 16;
1567 tmp = (tmp & 0xffff0000) | data;
1568 iwn_mem_write(sc, addr & ~3, tmp);
1571 static __inline void
1572 iwn_mem_read_region_4(struct iwn_softc *sc, uint32_t addr, uint32_t *data,
1575 for (; count > 0; count--, addr += 4)
1576 *data++ = iwn_mem_read(sc, addr);
1579 static __inline void
1580 iwn_mem_set_region_4(struct iwn_softc *sc, uint32_t addr, uint32_t val,
1583 for (; count > 0; count--, addr += 4)
1584 iwn_mem_write(sc, addr, val);
1588 iwn_eeprom_lock(struct iwn_softc *sc)
1592 for (i = 0; i < 100; i++) {
1593 /* Request exclusive access to EEPROM. */
1594 IWN_SETBITS(sc, IWN_HW_IF_CONFIG,
1595 IWN_HW_IF_CONFIG_EEPROM_LOCKED);
1597 /* Spin until we actually get the lock. */
1598 for (ntries = 0; ntries < 100; ntries++) {
1599 if (IWN_READ(sc, IWN_HW_IF_CONFIG) &
1600 IWN_HW_IF_CONFIG_EEPROM_LOCKED)
1605 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end timeout\n", __func__);
1609 static __inline void
1610 iwn_eeprom_unlock(struct iwn_softc *sc)
1612 IWN_CLRBITS(sc, IWN_HW_IF_CONFIG, IWN_HW_IF_CONFIG_EEPROM_LOCKED);
1616 * Initialize access by host to One Time Programmable ROM.
1617 * NB: This kind of ROM can be found on 1000 or 6000 Series only.
1620 iwn_init_otprom(struct iwn_softc *sc)
1622 uint16_t prev, base, next;
1625 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
1627 /* Wait for clock stabilization before accessing prph. */
1628 if ((error = iwn_clock_wait(sc)) != 0)
1631 if ((error = iwn_nic_lock(sc)) != 0)
1633 iwn_prph_setbits(sc, IWN_APMG_PS, IWN_APMG_PS_RESET_REQ);
1635 iwn_prph_clrbits(sc, IWN_APMG_PS, IWN_APMG_PS_RESET_REQ);
1638 /* Set auto clock gate disable bit for HW with OTP shadow RAM. */
1639 if (sc->base_params->shadow_ram_support) {
1640 IWN_SETBITS(sc, IWN_DBG_LINK_PWR_MGMT,
1641 IWN_RESET_LINK_PWR_MGMT_DIS);
1643 IWN_CLRBITS(sc, IWN_EEPROM_GP, IWN_EEPROM_GP_IF_OWNER);
1644 /* Clear ECC status. */
1645 IWN_SETBITS(sc, IWN_OTP_GP,
1646 IWN_OTP_GP_ECC_CORR_STTS | IWN_OTP_GP_ECC_UNCORR_STTS);
1649 * Find the block before last block (contains the EEPROM image)
1650 * for HW without OTP shadow RAM.
1652 if (! sc->base_params->shadow_ram_support) {
1653 /* Switch to absolute addressing mode. */
1654 IWN_CLRBITS(sc, IWN_OTP_GP, IWN_OTP_GP_RELATIVE_ACCESS);
1656 for (count = 0; count < sc->base_params->max_ll_items;
1658 error = iwn_read_prom_data(sc, base, &next, 2);
1661 if (next == 0) /* End of linked-list. */
1664 base = le16toh(next);
1666 if (count == 0 || count == sc->base_params->max_ll_items)
1668 /* Skip "next" word. */
1669 sc->prom_base = prev + 1;
1672 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__);
1678 iwn_read_prom_data(struct iwn_softc *sc, uint32_t addr, void *data, int count)
1680 uint8_t *out = data;
1684 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
1686 addr += sc->prom_base;
1687 for (; count > 0; count -= 2, addr++) {
1688 IWN_WRITE(sc, IWN_EEPROM, addr << 2);
1689 for (ntries = 0; ntries < 10; ntries++) {
1690 val = IWN_READ(sc, IWN_EEPROM);
1691 if (val & IWN_EEPROM_READ_VALID)
1696 device_printf(sc->sc_dev,
1697 "timeout reading ROM at 0x%x\n", addr);
1700 if (sc->sc_flags & IWN_FLAG_HAS_OTPROM) {
1701 /* OTPROM, check for ECC errors. */
1702 tmp = IWN_READ(sc, IWN_OTP_GP);
1703 if (tmp & IWN_OTP_GP_ECC_UNCORR_STTS) {
1704 device_printf(sc->sc_dev,
1705 "OTPROM ECC error at 0x%x\n", addr);
1708 if (tmp & IWN_OTP_GP_ECC_CORR_STTS) {
1709 /* Correctable ECC error, clear bit. */
1710 IWN_SETBITS(sc, IWN_OTP_GP,
1711 IWN_OTP_GP_ECC_CORR_STTS);
1719 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__);
1725 iwn_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nsegs, int error)
1729 KASSERT(nsegs == 1, ("too many DMA segments, %d should be 1", nsegs));
1730 *(bus_addr_t *)arg = segs[0].ds_addr;
1734 iwn_dma_contig_alloc(struct iwn_softc *sc, struct iwn_dma_info *dma,
1735 void **kvap, bus_size_t size, bus_size_t alignment)
1742 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), alignment,
1743 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, size,
1744 1, size, 0, NULL, NULL, &dma->tag);
1748 error = bus_dmamem_alloc(dma->tag, (void **)&dma->vaddr,
1749 BUS_DMA_NOWAIT | BUS_DMA_ZERO | BUS_DMA_COHERENT, &dma->map);
1753 error = bus_dmamap_load(dma->tag, dma->map, dma->vaddr, size,
1754 iwn_dma_map_addr, &dma->paddr, BUS_DMA_NOWAIT);
1758 bus_dmamap_sync(dma->tag, dma->map, BUS_DMASYNC_PREWRITE);
1765 fail: iwn_dma_contig_free(dma);
1770 iwn_dma_contig_free(struct iwn_dma_info *dma)
1772 if (dma->vaddr != NULL) {
1773 bus_dmamap_sync(dma->tag, dma->map,
1774 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
1775 bus_dmamap_unload(dma->tag, dma->map);
1776 bus_dmamem_free(dma->tag, dma->vaddr, dma->map);
1779 if (dma->tag != NULL) {
1780 bus_dma_tag_destroy(dma->tag);
1786 iwn_alloc_sched(struct iwn_softc *sc)
1788 /* TX scheduler rings must be aligned on a 1KB boundary. */
1789 return iwn_dma_contig_alloc(sc, &sc->sched_dma, (void **)&sc->sched,
1794 iwn_free_sched(struct iwn_softc *sc)
1796 iwn_dma_contig_free(&sc->sched_dma);
1800 iwn_alloc_kw(struct iwn_softc *sc)
1802 /* "Keep Warm" page must be aligned on a 4KB boundary. */
1803 return iwn_dma_contig_alloc(sc, &sc->kw_dma, NULL, 4096, 4096);
1807 iwn_free_kw(struct iwn_softc *sc)
1809 iwn_dma_contig_free(&sc->kw_dma);
1813 iwn_alloc_ict(struct iwn_softc *sc)
1815 /* ICT table must be aligned on a 4KB boundary. */
1816 return iwn_dma_contig_alloc(sc, &sc->ict_dma, (void **)&sc->ict,
1817 IWN_ICT_SIZE, 4096);
1821 iwn_free_ict(struct iwn_softc *sc)
1823 iwn_dma_contig_free(&sc->ict_dma);
1827 iwn_alloc_fwmem(struct iwn_softc *sc)
1829 /* Must be aligned on a 16-byte boundary. */
1830 return iwn_dma_contig_alloc(sc, &sc->fw_dma, NULL, sc->fwsz, 16);
1834 iwn_free_fwmem(struct iwn_softc *sc)
1836 iwn_dma_contig_free(&sc->fw_dma);
1840 iwn_alloc_rx_ring(struct iwn_softc *sc, struct iwn_rx_ring *ring)
1847 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
1849 /* Allocate RX descriptors (256-byte aligned). */
1850 size = IWN_RX_RING_COUNT * sizeof (uint32_t);
1851 error = iwn_dma_contig_alloc(sc, &ring->desc_dma, (void **)&ring->desc,
1854 device_printf(sc->sc_dev,
1855 "%s: could not allocate RX ring DMA memory, error %d\n",
1860 /* Allocate RX status area (16-byte aligned). */
1861 error = iwn_dma_contig_alloc(sc, &ring->stat_dma, (void **)&ring->stat,
1862 sizeof (struct iwn_rx_status), 16);
1864 device_printf(sc->sc_dev,
1865 "%s: could not allocate RX status DMA memory, error %d\n",
1870 /* Create RX buffer DMA tag. */
1871 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0,
1872 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
1873 IWN_RBUF_SIZE, 1, IWN_RBUF_SIZE, 0, NULL, NULL, &ring->data_dmat);
1875 device_printf(sc->sc_dev,
1876 "%s: could not create RX buf DMA tag, error %d\n",
1882 * Allocate and map RX buffers.
1884 for (i = 0; i < IWN_RX_RING_COUNT; i++) {
1885 struct iwn_rx_data *data = &ring->data[i];
1888 error = bus_dmamap_create(ring->data_dmat, 0, &data->map);
1890 device_printf(sc->sc_dev,
1891 "%s: could not create RX buf DMA map, error %d\n",
1896 data->m = m_getjcl(M_NOWAIT, MT_DATA, M_PKTHDR,
1898 if (data->m == NULL) {
1899 device_printf(sc->sc_dev,
1900 "%s: could not allocate RX mbuf\n", __func__);
1905 error = bus_dmamap_load(ring->data_dmat, data->map,
1906 mtod(data->m, void *), IWN_RBUF_SIZE, iwn_dma_map_addr,
1907 &paddr, BUS_DMA_NOWAIT);
1908 if (error != 0 && error != EFBIG) {
1909 device_printf(sc->sc_dev,
1910 "%s: can't map mbuf, error %d\n", __func__,
1915 bus_dmamap_sync(ring->data_dmat, data->map,
1916 BUS_DMASYNC_PREREAD);
1918 /* Set physical address of RX buffer (256-byte aligned). */
1919 ring->desc[i] = htole32(paddr >> 8);
1922 bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map,
1923 BUS_DMASYNC_PREWRITE);
1925 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__);
1929 fail: iwn_free_rx_ring(sc, ring);
1931 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end in error\n",__func__);
1937 iwn_reset_rx_ring(struct iwn_softc *sc, struct iwn_rx_ring *ring)
1941 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
1943 if (iwn_nic_lock(sc) == 0) {
1944 IWN_WRITE(sc, IWN_FH_RX_CONFIG, 0);
1945 for (ntries = 0; ntries < 1000; ntries++) {
1946 if (IWN_READ(sc, IWN_FH_RX_STATUS) &
1947 IWN_FH_RX_STATUS_IDLE)
1954 sc->last_rx_valid = 0;
1958 iwn_free_rx_ring(struct iwn_softc *sc, struct iwn_rx_ring *ring)
1962 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s \n", __func__);
1964 iwn_dma_contig_free(&ring->desc_dma);
1965 iwn_dma_contig_free(&ring->stat_dma);
1967 for (i = 0; i < IWN_RX_RING_COUNT; i++) {
1968 struct iwn_rx_data *data = &ring->data[i];
1970 if (data->m != NULL) {
1971 bus_dmamap_sync(ring->data_dmat, data->map,
1972 BUS_DMASYNC_POSTREAD);
1973 bus_dmamap_unload(ring->data_dmat, data->map);
1977 if (data->map != NULL)
1978 bus_dmamap_destroy(ring->data_dmat, data->map);
1980 if (ring->data_dmat != NULL) {
1981 bus_dma_tag_destroy(ring->data_dmat);
1982 ring->data_dmat = NULL;
1987 iwn_alloc_tx_ring(struct iwn_softc *sc, struct iwn_tx_ring *ring, int qid)
1997 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
1999 /* Allocate TX descriptors (256-byte aligned). */
2000 size = IWN_TX_RING_COUNT * sizeof (struct iwn_tx_desc);
2001 error = iwn_dma_contig_alloc(sc, &ring->desc_dma, (void **)&ring->desc,
2004 device_printf(sc->sc_dev,
2005 "%s: could not allocate TX ring DMA memory, error %d\n",
2010 size = IWN_TX_RING_COUNT * sizeof (struct iwn_tx_cmd);
2011 error = iwn_dma_contig_alloc(sc, &ring->cmd_dma, (void **)&ring->cmd,
2014 device_printf(sc->sc_dev,
2015 "%s: could not allocate TX cmd DMA memory, error %d\n",
2020 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0,
2021 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES,
2022 IWN_MAX_SCATTER - 1, MCLBYTES, 0, NULL, NULL, &ring->data_dmat);
2024 device_printf(sc->sc_dev,
2025 "%s: could not create TX buf DMA tag, error %d\n",
2030 paddr = ring->cmd_dma.paddr;
2031 for (i = 0; i < IWN_TX_RING_COUNT; i++) {
2032 struct iwn_tx_data *data = &ring->data[i];
2034 data->cmd_paddr = paddr;
2035 data->scratch_paddr = paddr + 12;
2036 paddr += sizeof (struct iwn_tx_cmd);
2038 error = bus_dmamap_create(ring->data_dmat, 0, &data->map);
2040 device_printf(sc->sc_dev,
2041 "%s: could not create TX buf DMA map, error %d\n",
2047 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__);
2051 fail: iwn_free_tx_ring(sc, ring);
2052 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end in error\n", __func__);
2057 iwn_reset_tx_ring(struct iwn_softc *sc, struct iwn_tx_ring *ring)
2061 DPRINTF(sc, IWN_DEBUG_TRACE, "->doing %s \n", __func__);
2063 for (i = 0; i < IWN_TX_RING_COUNT; i++) {
2064 struct iwn_tx_data *data = &ring->data[i];
2066 if (data->m != NULL) {
2067 bus_dmamap_sync(ring->data_dmat, data->map,
2068 BUS_DMASYNC_POSTWRITE);
2069 bus_dmamap_unload(ring->data_dmat, data->map);
2073 if (data->ni != NULL) {
2074 ieee80211_free_node(data->ni);
2078 /* Clear TX descriptors. */
2079 memset(ring->desc, 0, ring->desc_dma.size);
2080 bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map,
2081 BUS_DMASYNC_PREWRITE);
2082 sc->qfullmsk &= ~(1 << ring->qid);
2088 iwn_free_tx_ring(struct iwn_softc *sc, struct iwn_tx_ring *ring)
2092 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s \n", __func__);
2094 iwn_dma_contig_free(&ring->desc_dma);
2095 iwn_dma_contig_free(&ring->cmd_dma);
2097 for (i = 0; i < IWN_TX_RING_COUNT; i++) {
2098 struct iwn_tx_data *data = &ring->data[i];
2100 if (data->m != NULL) {
2101 bus_dmamap_sync(ring->data_dmat, data->map,
2102 BUS_DMASYNC_POSTWRITE);
2103 bus_dmamap_unload(ring->data_dmat, data->map);
2106 if (data->map != NULL)
2107 bus_dmamap_destroy(ring->data_dmat, data->map);
2109 if (ring->data_dmat != NULL) {
2110 bus_dma_tag_destroy(ring->data_dmat);
2111 ring->data_dmat = NULL;
2116 iwn5000_ict_reset(struct iwn_softc *sc)
2118 /* Disable interrupts. */
2119 IWN_WRITE(sc, IWN_INT_MASK, 0);
2121 /* Reset ICT table. */
2122 memset(sc->ict, 0, IWN_ICT_SIZE);
2125 bus_dmamap_sync(sc->ict_dma.tag, sc->ict_dma.map,
2126 BUS_DMASYNC_PREWRITE);
2128 /* Set physical address of ICT table (4KB aligned). */
2129 DPRINTF(sc, IWN_DEBUG_RESET, "%s: enabling ICT\n", __func__);
2130 IWN_WRITE(sc, IWN_DRAM_INT_TBL, IWN_DRAM_INT_TBL_ENABLE |
2131 IWN_DRAM_INT_TBL_WRAP_CHECK | sc->ict_dma.paddr >> 12);
2133 /* Enable periodic RX interrupt. */
2134 sc->int_mask |= IWN_INT_RX_PERIODIC;
2135 /* Switch to ICT interrupt mode in driver. */
2136 sc->sc_flags |= IWN_FLAG_USE_ICT;
2138 /* Re-enable interrupts. */
2139 IWN_WRITE(sc, IWN_INT, 0xffffffff);
2140 IWN_WRITE(sc, IWN_INT_MASK, sc->int_mask);
2144 iwn_read_eeprom(struct iwn_softc *sc, uint8_t macaddr[IEEE80211_ADDR_LEN])
2146 struct iwn_ops *ops = &sc->ops;
2150 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
2152 /* Check whether adapter has an EEPROM or an OTPROM. */
2153 if (sc->hw_type >= IWN_HW_REV_TYPE_1000 &&
2154 (IWN_READ(sc, IWN_OTP_GP) & IWN_OTP_GP_DEV_SEL_OTP))
2155 sc->sc_flags |= IWN_FLAG_HAS_OTPROM;
2156 DPRINTF(sc, IWN_DEBUG_RESET, "%s found\n",
2157 (sc->sc_flags & IWN_FLAG_HAS_OTPROM) ? "OTPROM" : "EEPROM");
2159 /* Adapter has to be powered on for EEPROM access to work. */
2160 if ((error = iwn_apm_init(sc)) != 0) {
2161 device_printf(sc->sc_dev,
2162 "%s: could not power ON adapter, error %d\n", __func__,
2167 if ((IWN_READ(sc, IWN_EEPROM_GP) & 0x7) == 0) {
2168 device_printf(sc->sc_dev, "%s: bad ROM signature\n", __func__);
2171 if ((error = iwn_eeprom_lock(sc)) != 0) {
2172 device_printf(sc->sc_dev, "%s: could not lock ROM, error %d\n",
2176 if (sc->sc_flags & IWN_FLAG_HAS_OTPROM) {
2177 if ((error = iwn_init_otprom(sc)) != 0) {
2178 device_printf(sc->sc_dev,
2179 "%s: could not initialize OTPROM, error %d\n",
2185 iwn_read_prom_data(sc, IWN_EEPROM_SKU_CAP, &val, 2);
2186 DPRINTF(sc, IWN_DEBUG_RESET, "SKU capabilities=0x%04x\n", le16toh(val));
2187 /* Check if HT support is bonded out. */
2188 if (val & htole16(IWN_EEPROM_SKU_CAP_11N))
2189 sc->sc_flags |= IWN_FLAG_HAS_11N;
2191 iwn_read_prom_data(sc, IWN_EEPROM_RFCFG, &val, 2);
2192 sc->rfcfg = le16toh(val);
2193 DPRINTF(sc, IWN_DEBUG_RESET, "radio config=0x%04x\n", sc->rfcfg);
2194 /* Read Tx/Rx chains from ROM unless it's known to be broken. */
2195 if (sc->txchainmask == 0)
2196 sc->txchainmask = IWN_RFCFG_TXANTMSK(sc->rfcfg);
2197 if (sc->rxchainmask == 0)
2198 sc->rxchainmask = IWN_RFCFG_RXANTMSK(sc->rfcfg);
2200 /* Read MAC address. */
2201 iwn_read_prom_data(sc, IWN_EEPROM_MAC, macaddr, 6);
2203 /* Read adapter-specific information from EEPROM. */
2204 ops->read_eeprom(sc);
2206 iwn_apm_stop(sc); /* Power OFF adapter. */
2208 iwn_eeprom_unlock(sc);
2210 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__);
2216 iwn4965_read_eeprom(struct iwn_softc *sc)
2222 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
2224 /* Read regulatory domain (4 ASCII characters). */
2225 iwn_read_prom_data(sc, IWN4965_EEPROM_DOMAIN, sc->eeprom_domain, 4);
2227 /* Read the list of authorized channels (20MHz & 40MHz). */
2228 for (i = 0; i < IWN_NBANDS - 1; i++) {
2229 addr = iwn4965_regulatory_bands[i];
2230 iwn_read_eeprom_channels(sc, i, addr);
2233 /* Read maximum allowed TX power for 2GHz and 5GHz bands. */
2234 iwn_read_prom_data(sc, IWN4965_EEPROM_MAXPOW, &val, 2);
2235 sc->maxpwr2GHz = val & 0xff;
2236 sc->maxpwr5GHz = val >> 8;
2237 /* Check that EEPROM values are within valid range. */
2238 if (sc->maxpwr5GHz < 20 || sc->maxpwr5GHz > 50)
2239 sc->maxpwr5GHz = 38;
2240 if (sc->maxpwr2GHz < 20 || sc->maxpwr2GHz > 50)
2241 sc->maxpwr2GHz = 38;
2242 DPRINTF(sc, IWN_DEBUG_RESET, "maxpwr 2GHz=%d 5GHz=%d\n",
2243 sc->maxpwr2GHz, sc->maxpwr5GHz);
2245 /* Read samples for each TX power group. */
2246 iwn_read_prom_data(sc, IWN4965_EEPROM_BANDS, sc->bands,
2249 /* Read voltage at which samples were taken. */
2250 iwn_read_prom_data(sc, IWN4965_EEPROM_VOLTAGE, &val, 2);
2251 sc->eeprom_voltage = (int16_t)le16toh(val);
2252 DPRINTF(sc, IWN_DEBUG_RESET, "voltage=%d (in 0.3V)\n",
2253 sc->eeprom_voltage);
2256 /* Print samples. */
2257 if (sc->sc_debug & IWN_DEBUG_ANY) {
2258 for (i = 0; i < IWN_NBANDS - 1; i++)
2259 iwn4965_print_power_group(sc, i);
2263 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__);
2268 iwn4965_print_power_group(struct iwn_softc *sc, int i)
2270 struct iwn4965_eeprom_band *band = &sc->bands[i];
2271 struct iwn4965_eeprom_chan_samples *chans = band->chans;
2274 printf("===band %d===\n", i);
2275 printf("chan lo=%d, chan hi=%d\n", band->lo, band->hi);
2276 printf("chan1 num=%d\n", chans[0].num);
2277 for (c = 0; c < 2; c++) {
2278 for (j = 0; j < IWN_NSAMPLES; j++) {
2279 printf("chain %d, sample %d: temp=%d gain=%d "
2280 "power=%d pa_det=%d\n", c, j,
2281 chans[0].samples[c][j].temp,
2282 chans[0].samples[c][j].gain,
2283 chans[0].samples[c][j].power,
2284 chans[0].samples[c][j].pa_det);
2287 printf("chan2 num=%d\n", chans[1].num);
2288 for (c = 0; c < 2; c++) {
2289 for (j = 0; j < IWN_NSAMPLES; j++) {
2290 printf("chain %d, sample %d: temp=%d gain=%d "
2291 "power=%d pa_det=%d\n", c, j,
2292 chans[1].samples[c][j].temp,
2293 chans[1].samples[c][j].gain,
2294 chans[1].samples[c][j].power,
2295 chans[1].samples[c][j].pa_det);
2302 iwn5000_read_eeprom(struct iwn_softc *sc)
2304 struct iwn5000_eeprom_calib_hdr hdr;
2306 uint32_t base, addr;
2310 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
2312 /* Read regulatory domain (4 ASCII characters). */
2313 iwn_read_prom_data(sc, IWN5000_EEPROM_REG, &val, 2);
2314 base = le16toh(val);
2315 iwn_read_prom_data(sc, base + IWN5000_EEPROM_DOMAIN,
2316 sc->eeprom_domain, 4);
2318 /* Read the list of authorized channels (20MHz & 40MHz). */
2319 for (i = 0; i < IWN_NBANDS - 1; i++) {
2320 addr = base + sc->base_params->regulatory_bands[i];
2321 iwn_read_eeprom_channels(sc, i, addr);
2324 /* Read enhanced TX power information for 6000 Series. */
2325 if (sc->base_params->enhanced_TX_power)
2326 iwn_read_eeprom_enhinfo(sc);
2328 iwn_read_prom_data(sc, IWN5000_EEPROM_CAL, &val, 2);
2329 base = le16toh(val);
2330 iwn_read_prom_data(sc, base, &hdr, sizeof hdr);
2331 DPRINTF(sc, IWN_DEBUG_CALIBRATE,
2332 "%s: calib version=%u pa type=%u voltage=%u\n", __func__,
2333 hdr.version, hdr.pa_type, le16toh(hdr.volt));
2334 sc->calib_ver = hdr.version;
2336 if (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSETv2) {
2337 sc->eeprom_voltage = le16toh(hdr.volt);
2338 iwn_read_prom_data(sc, base + IWN5000_EEPROM_TEMP, &val, 2);
2339 sc->eeprom_temp_high=le16toh(val);
2340 iwn_read_prom_data(sc, base + IWN5000_EEPROM_VOLT, &val, 2);
2341 sc->eeprom_temp = le16toh(val);
2344 if (sc->hw_type == IWN_HW_REV_TYPE_5150) {
2345 /* Compute temperature offset. */
2346 iwn_read_prom_data(sc, base + IWN5000_EEPROM_TEMP, &val, 2);
2347 sc->eeprom_temp = le16toh(val);
2348 iwn_read_prom_data(sc, base + IWN5000_EEPROM_VOLT, &val, 2);
2349 volt = le16toh(val);
2350 sc->temp_off = sc->eeprom_temp - (volt / -5);
2351 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "temp=%d volt=%d offset=%dK\n",
2352 sc->eeprom_temp, volt, sc->temp_off);
2354 /* Read crystal calibration. */
2355 iwn_read_prom_data(sc, base + IWN5000_EEPROM_CRYSTAL,
2356 &sc->eeprom_crystal, sizeof (uint32_t));
2357 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "crystal calibration 0x%08x\n",
2358 le32toh(sc->eeprom_crystal));
2361 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__);
2366 * Translate EEPROM flags to net80211.
2369 iwn_eeprom_channel_flags(struct iwn_eeprom_chan *channel)
2374 if ((channel->flags & IWN_EEPROM_CHAN_ACTIVE) == 0)
2375 nflags |= IEEE80211_CHAN_PASSIVE;
2376 if ((channel->flags & IWN_EEPROM_CHAN_IBSS) == 0)
2377 nflags |= IEEE80211_CHAN_NOADHOC;
2378 if (channel->flags & IWN_EEPROM_CHAN_RADAR) {
2379 nflags |= IEEE80211_CHAN_DFS;
2380 /* XXX apparently IBSS may still be marked */
2381 nflags |= IEEE80211_CHAN_NOADHOC;
2388 iwn_read_eeprom_band(struct iwn_softc *sc, int n, int maxchans, int *nchans,
2389 struct ieee80211_channel chans[])
2391 struct iwn_eeprom_chan *channels = sc->eeprom_channels[n];
2392 const struct iwn_chan_band *band = &iwn_bands[n];
2393 uint8_t bands[IEEE80211_MODE_BYTES];
2395 int i, error, nflags;
2397 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
2399 memset(bands, 0, sizeof(bands));
2401 setbit(bands, IEEE80211_MODE_11B);
2402 setbit(bands, IEEE80211_MODE_11G);
2403 if (sc->sc_flags & IWN_FLAG_HAS_11N)
2404 setbit(bands, IEEE80211_MODE_11NG);
2406 setbit(bands, IEEE80211_MODE_11A);
2407 if (sc->sc_flags & IWN_FLAG_HAS_11N)
2408 setbit(bands, IEEE80211_MODE_11NA);
2411 for (i = 0; i < band->nchan; i++) {
2412 if (!(channels[i].flags & IWN_EEPROM_CHAN_VALID)) {
2413 DPRINTF(sc, IWN_DEBUG_RESET,
2414 "skip chan %d flags 0x%x maxpwr %d\n",
2415 band->chan[i], channels[i].flags,
2416 channels[i].maxpwr);
2420 chan = band->chan[i];
2421 nflags = iwn_eeprom_channel_flags(&channels[i]);
2422 error = ieee80211_add_channel(chans, maxchans, nchans,
2423 chan, 0, channels[i].maxpwr, nflags, bands);
2427 /* Save maximum allowed TX power for this channel. */
2429 sc->maxpwr[chan] = channels[i].maxpwr;
2431 DPRINTF(sc, IWN_DEBUG_RESET,
2432 "add chan %d flags 0x%x maxpwr %d\n", chan,
2433 channels[i].flags, channels[i].maxpwr);
2436 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__);
2441 iwn_read_eeprom_ht40(struct iwn_softc *sc, int n, int maxchans, int *nchans,
2442 struct ieee80211_channel chans[])
2444 struct iwn_eeprom_chan *channels = sc->eeprom_channels[n];
2445 const struct iwn_chan_band *band = &iwn_bands[n];
2447 int i, error, nflags;
2449 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s start\n", __func__);
2451 if (!(sc->sc_flags & IWN_FLAG_HAS_11N)) {
2452 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end no 11n\n", __func__);
2456 for (i = 0; i < band->nchan; i++) {
2457 if (!(channels[i].flags & IWN_EEPROM_CHAN_VALID)) {
2458 DPRINTF(sc, IWN_DEBUG_RESET,
2459 "skip chan %d flags 0x%x maxpwr %d\n",
2460 band->chan[i], channels[i].flags,
2461 channels[i].maxpwr);
2465 chan = band->chan[i];
2466 nflags = iwn_eeprom_channel_flags(&channels[i]);
2467 nflags |= (n == 5 ? IEEE80211_CHAN_G : IEEE80211_CHAN_A);
2468 error = ieee80211_add_channel_ht40(chans, maxchans, nchans,
2469 chan, channels[i].maxpwr, nflags);
2472 device_printf(sc->sc_dev,
2473 "%s: no entry for channel %d\n", __func__, chan);
2476 DPRINTF(sc, IWN_DEBUG_RESET,
2477 "%s: skip chan %d, extension channel not found\n",
2481 device_printf(sc->sc_dev,
2482 "%s: channel table is full!\n", __func__);
2485 DPRINTF(sc, IWN_DEBUG_RESET,
2486 "add ht40 chan %d flags 0x%x maxpwr %d\n",
2487 chan, channels[i].flags, channels[i].maxpwr);
2494 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__);
2499 iwn_read_eeprom_channels(struct iwn_softc *sc, int n, uint32_t addr)
2501 struct ieee80211com *ic = &sc->sc_ic;
2503 iwn_read_prom_data(sc, addr, &sc->eeprom_channels[n],
2504 iwn_bands[n].nchan * sizeof (struct iwn_eeprom_chan));
2507 iwn_read_eeprom_band(sc, n, IEEE80211_CHAN_MAX, &ic->ic_nchans,
2510 iwn_read_eeprom_ht40(sc, n, IEEE80211_CHAN_MAX, &ic->ic_nchans,
2513 ieee80211_sort_channels(ic->ic_channels, ic->ic_nchans);
2516 static struct iwn_eeprom_chan *
2517 iwn_find_eeprom_channel(struct iwn_softc *sc, struct ieee80211_channel *c)
2519 int band, chan, i, j;
2521 if (IEEE80211_IS_CHAN_HT40(c)) {
2522 band = IEEE80211_IS_CHAN_5GHZ(c) ? 6 : 5;
2523 if (IEEE80211_IS_CHAN_HT40D(c))
2524 chan = c->ic_extieee;
2527 for (i = 0; i < iwn_bands[band].nchan; i++) {
2528 if (iwn_bands[band].chan[i] == chan)
2529 return &sc->eeprom_channels[band][i];
2532 for (j = 0; j < 5; j++) {
2533 for (i = 0; i < iwn_bands[j].nchan; i++) {
2534 if (iwn_bands[j].chan[i] == c->ic_ieee &&
2535 ((j == 0) ^ IEEE80211_IS_CHAN_A(c)) == 1)
2536 return &sc->eeprom_channels[j][i];
2544 iwn_getradiocaps(struct ieee80211com *ic,
2545 int maxchans, int *nchans, struct ieee80211_channel chans[])
2547 struct iwn_softc *sc = ic->ic_softc;
2550 /* Parse the list of authorized channels. */
2551 for (i = 0; i < 5 && *nchans < maxchans; i++)
2552 iwn_read_eeprom_band(sc, i, maxchans, nchans, chans);
2553 for (i = 5; i < IWN_NBANDS - 1 && *nchans < maxchans; i++)
2554 iwn_read_eeprom_ht40(sc, i, maxchans, nchans, chans);
2558 * Enforce flags read from EEPROM.
2561 iwn_setregdomain(struct ieee80211com *ic, struct ieee80211_regdomain *rd,
2562 int nchan, struct ieee80211_channel chans[])
2564 struct iwn_softc *sc = ic->ic_softc;
2567 for (i = 0; i < nchan; i++) {
2568 struct ieee80211_channel *c = &chans[i];
2569 struct iwn_eeprom_chan *channel;
2571 channel = iwn_find_eeprom_channel(sc, c);
2572 if (channel == NULL) {
2573 ic_printf(ic, "%s: invalid channel %u freq %u/0x%x\n",
2574 __func__, c->ic_ieee, c->ic_freq, c->ic_flags);
2577 c->ic_flags |= iwn_eeprom_channel_flags(channel);
2584 iwn_read_eeprom_enhinfo(struct iwn_softc *sc)
2586 struct iwn_eeprom_enhinfo enhinfo[35];
2587 struct ieee80211com *ic = &sc->sc_ic;
2588 struct ieee80211_channel *c;
2594 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
2596 iwn_read_prom_data(sc, IWN5000_EEPROM_REG, &val, 2);
2597 base = le16toh(val);
2598 iwn_read_prom_data(sc, base + IWN6000_EEPROM_ENHINFO,
2599 enhinfo, sizeof enhinfo);
2601 for (i = 0; i < nitems(enhinfo); i++) {
2602 flags = enhinfo[i].flags;
2603 if (!(flags & IWN_ENHINFO_VALID))
2604 continue; /* Skip invalid entries. */
2607 if (sc->txchainmask & IWN_ANT_A)
2608 maxpwr = MAX(maxpwr, enhinfo[i].chain[0]);
2609 if (sc->txchainmask & IWN_ANT_B)
2610 maxpwr = MAX(maxpwr, enhinfo[i].chain[1]);
2611 if (sc->txchainmask & IWN_ANT_C)
2612 maxpwr = MAX(maxpwr, enhinfo[i].chain[2]);
2613 if (sc->ntxchains == 2)
2614 maxpwr = MAX(maxpwr, enhinfo[i].mimo2);
2615 else if (sc->ntxchains == 3)
2616 maxpwr = MAX(maxpwr, enhinfo[i].mimo3);
2618 for (j = 0; j < ic->ic_nchans; j++) {
2619 c = &ic->ic_channels[j];
2620 if ((flags & IWN_ENHINFO_5GHZ)) {
2621 if (!IEEE80211_IS_CHAN_A(c))
2623 } else if ((flags & IWN_ENHINFO_OFDM)) {
2624 if (!IEEE80211_IS_CHAN_G(c))
2626 } else if (!IEEE80211_IS_CHAN_B(c))
2628 if ((flags & IWN_ENHINFO_HT40)) {
2629 if (!IEEE80211_IS_CHAN_HT40(c))
2632 if (IEEE80211_IS_CHAN_HT40(c))
2635 if (enhinfo[i].chan != 0 &&
2636 enhinfo[i].chan != c->ic_ieee)
2639 DPRINTF(sc, IWN_DEBUG_RESET,
2640 "channel %d(%x), maxpwr %d\n", c->ic_ieee,
2641 c->ic_flags, maxpwr / 2);
2642 c->ic_maxregpower = maxpwr / 2;
2643 c->ic_maxpower = maxpwr;
2647 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__);
2651 static struct ieee80211_node *
2652 iwn_node_alloc(struct ieee80211vap *vap, const uint8_t mac[IEEE80211_ADDR_LEN])
2654 return malloc(sizeof (struct iwn_node), M_80211_NODE,M_NOWAIT | M_ZERO);
2660 switch (rate & 0xff) {
2661 case 12: return 0xd;
2662 case 18: return 0xf;
2663 case 24: return 0x5;
2664 case 36: return 0x7;
2665 case 48: return 0x9;
2666 case 72: return 0xb;
2667 case 96: return 0x1;
2668 case 108: return 0x3;
2672 case 22: return 110;
2677 static __inline uint8_t
2678 plcp2rate(const uint8_t rate_plcp)
2680 switch (rate_plcp) {
2681 case 0xd: return 12;
2682 case 0xf: return 18;
2683 case 0x5: return 24;
2684 case 0x7: return 36;
2685 case 0x9: return 48;
2686 case 0xb: return 72;
2687 case 0x1: return 96;
2688 case 0x3: return 108;
2692 case 110: return 22;
2698 iwn_get_1stream_tx_antmask(struct iwn_softc *sc)
2701 return IWN_LSB(sc->txchainmask);
2705 iwn_get_2stream_tx_antmask(struct iwn_softc *sc)
2710 * The '2 stream' setup is a bit .. odd.
2712 * For NICs that support only 1 antenna, default to IWN_ANT_AB or
2713 * the firmware panics (eg Intel 5100.)
2715 * For NICs that support two antennas, we use ANT_AB.
2717 * For NICs that support three antennas, we use the two that
2718 * wasn't the default one.
2720 * XXX TODO: if bluetooth (full concurrent) is enabled, restrict
2721 * this to only one antenna.
2724 /* Default - transmit on the other antennas */
2725 tx = (sc->txchainmask & ~IWN_LSB(sc->txchainmask));
2727 /* Now, if it's zero, set it to IWN_ANT_AB, so to not panic firmware */
2732 * If the NIC is a two-stream TX NIC, configure the TX mask to
2733 * the default chainmask
2735 else if (sc->ntxchains == 2)
2736 tx = sc->txchainmask;
2744 * Calculate the required PLCP value from the given rate,
2745 * to the given node.
2747 * This will take the node configuration (eg 11n, rate table
2748 * setup, etc) into consideration.
2751 iwn_rate_to_plcp(struct iwn_softc *sc, struct ieee80211_node *ni,
2754 struct ieee80211com *ic = ni->ni_ic;
2759 * If it's an MCS rate, let's set the plcp correctly
2760 * and set the relevant flags based on the node config.
2762 if (rate & IEEE80211_RATE_MCS) {
2764 * Set the initial PLCP value to be between 0->31 for
2765 * MCS 0 -> MCS 31, then set the "I'm an MCS rate!"
2768 plcp = IEEE80211_RV(rate) | IWN_RFLAG_MCS;
2771 * XXX the following should only occur if both
2772 * the local configuration _and_ the remote node
2773 * advertise these capabilities. Thus this code
2778 * Set the channel width and guard interval.
2780 if (IEEE80211_IS_CHAN_HT40(ni->ni_chan)) {
2781 plcp |= IWN_RFLAG_HT40;
2782 if (ni->ni_htcap & IEEE80211_HTCAP_SHORTGI40)
2783 plcp |= IWN_RFLAG_SGI;
2784 } else if (ni->ni_htcap & IEEE80211_HTCAP_SHORTGI20) {
2785 plcp |= IWN_RFLAG_SGI;
2789 * Ensure the selected rate matches the link quality
2790 * table entries being used.
2793 plcp |= IWN_RFLAG_ANT(sc->txchainmask);
2794 else if (rate > 0x87)
2795 plcp |= IWN_RFLAG_ANT(iwn_get_2stream_tx_antmask(sc));
2797 plcp |= IWN_RFLAG_ANT(iwn_get_1stream_tx_antmask(sc));
2800 * Set the initial PLCP - fine for both
2801 * OFDM and CCK rates.
2803 plcp = rate2plcp(rate);
2805 /* Set CCK flag if it's CCK */
2807 /* XXX It would be nice to have a method
2808 * to map the ridx -> phy table entry
2809 * so we could just query that, rather than
2810 * this hack to check against IWN_RIDX_OFDM6.
2812 ridx = ieee80211_legacy_rate_lookup(ic->ic_rt,
2813 rate & IEEE80211_RATE_VAL);
2814 if (ridx < IWN_RIDX_OFDM6 &&
2815 IEEE80211_IS_CHAN_2GHZ(ni->ni_chan))
2816 plcp |= IWN_RFLAG_CCK;
2818 /* Set antenna configuration */
2819 /* XXX TODO: is this the right antenna to use for legacy? */
2820 plcp |= IWN_RFLAG_ANT(iwn_get_1stream_tx_antmask(sc));
2823 DPRINTF(sc, IWN_DEBUG_TXRATE, "%s: rate=0x%02x, plcp=0x%08x\n",
2828 return (htole32(plcp));
2832 iwn_newassoc(struct ieee80211_node *ni, int isnew)
2834 /* Doesn't do anything at the moment */
2838 iwn_media_change(struct ifnet *ifp)
2842 error = ieee80211_media_change(ifp);
2843 /* NB: only the fixed rate can change and that doesn't need a reset */
2844 return (error == ENETRESET ? 0 : error);
2848 iwn_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg)
2850 struct iwn_vap *ivp = IWN_VAP(vap);
2851 struct ieee80211com *ic = vap->iv_ic;
2852 struct iwn_softc *sc = ic->ic_softc;
2855 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
2857 DPRINTF(sc, IWN_DEBUG_STATE, "%s: %s -> %s\n", __func__,
2858 ieee80211_state_name[vap->iv_state], ieee80211_state_name[nstate]);
2860 IEEE80211_UNLOCK(ic);
2862 callout_stop(&sc->calib_to);
2864 sc->rxon = &sc->rx_on[IWN_RXON_BSS_CTX];
2867 case IEEE80211_S_ASSOC:
2868 if (vap->iv_state != IEEE80211_S_RUN)
2871 case IEEE80211_S_AUTH:
2872 if (vap->iv_state == IEEE80211_S_AUTH)
2876 * !AUTH -> AUTH transition requires state reset to handle
2877 * reassociations correctly.
2879 sc->rxon->associd = 0;
2880 sc->rxon->filter &= ~htole32(IWN_FILTER_BSS);
2881 sc->calib.state = IWN_CALIB_STATE_INIT;
2883 /* Wait until we hear a beacon before we transmit */
2884 if (IEEE80211_IS_CHAN_PASSIVE(ic->ic_curchan))
2885 sc->sc_beacon_wait = 1;
2887 if ((error = iwn_auth(sc, vap)) != 0) {
2888 device_printf(sc->sc_dev,
2889 "%s: could not move to auth state\n", __func__);
2893 case IEEE80211_S_RUN:
2895 * RUN -> RUN transition; Just restart the timers.
2897 if (vap->iv_state == IEEE80211_S_RUN) {
2902 /* Wait until we hear a beacon before we transmit */
2903 if (IEEE80211_IS_CHAN_PASSIVE(ic->ic_curchan))
2904 sc->sc_beacon_wait = 1;
2907 * !RUN -> RUN requires setting the association id
2908 * which is done with a firmware cmd. We also defer
2909 * starting the timers until that work is done.
2911 if ((error = iwn_run(sc, vap)) != 0) {
2912 device_printf(sc->sc_dev,
2913 "%s: could not move to run state\n", __func__);
2917 case IEEE80211_S_INIT:
2918 sc->calib.state = IWN_CALIB_STATE_INIT;
2920 * Purge the xmit queue so we don't have old frames
2921 * during a new association attempt.
2923 sc->sc_beacon_wait = 0;
2924 iwn_xmit_queue_drain(sc);
2933 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end in error\n", __func__);
2937 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__);
2939 return ivp->iv_newstate(vap, nstate, arg);
2943 iwn_calib_timeout(void *arg)
2945 struct iwn_softc *sc = arg;
2947 IWN_LOCK_ASSERT(sc);
2949 /* Force automatic TX power calibration every 60 secs. */
2950 if (++sc->calib_cnt >= 120) {
2953 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "%s\n",
2954 "sending request for statistics");
2955 (void)iwn_cmd(sc, IWN_CMD_GET_STATISTICS, &flags,
2959 callout_reset(&sc->calib_to, msecs_to_ticks(500), iwn_calib_timeout,
2964 * Process an RX_PHY firmware notification. This is usually immediately
2965 * followed by an MPDU_RX_DONE notification.
2968 iwn_rx_phy(struct iwn_softc *sc, struct iwn_rx_desc *desc,
2969 struct iwn_rx_data *data)
2971 struct iwn_rx_stat *stat = (struct iwn_rx_stat *)(desc + 1);
2973 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "%s: received PHY stats\n", __func__);
2974 bus_dmamap_sync(sc->rxq.data_dmat, data->map, BUS_DMASYNC_POSTREAD);
2976 /* Save RX statistics, they will be used on MPDU_RX_DONE. */
2977 memcpy(&sc->last_rx_stat, stat, sizeof (*stat));
2978 sc->last_rx_valid = 1;
2982 * Process an RX_DONE (4965AGN only) or MPDU_RX_DONE firmware notification.
2983 * Each MPDU_RX_DONE notification must be preceded by an RX_PHY one.
2986 iwn_rx_done(struct iwn_softc *sc, struct iwn_rx_desc *desc,
2987 struct iwn_rx_data *data)
2989 struct iwn_ops *ops = &sc->ops;
2990 struct ieee80211com *ic = &sc->sc_ic;
2991 struct iwn_rx_ring *ring = &sc->rxq;
2992 struct ieee80211_frame *wh;
2993 struct ieee80211_node *ni;
2994 struct mbuf *m, *m1;
2995 struct iwn_rx_stat *stat;
2999 int error, len, rssi, nf;
3001 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
3003 if (desc->type == IWN_MPDU_RX_DONE) {
3004 /* Check for prior RX_PHY notification. */
3005 if (!sc->last_rx_valid) {
3006 DPRINTF(sc, IWN_DEBUG_ANY,
3007 "%s: missing RX_PHY\n", __func__);
3010 stat = &sc->last_rx_stat;
3012 stat = (struct iwn_rx_stat *)(desc + 1);
3014 bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_POSTREAD);
3016 if (stat->cfg_phy_len > IWN_STAT_MAXLEN) {
3017 device_printf(sc->sc_dev,
3018 "%s: invalid RX statistic header, len %d\n", __func__,
3022 if (desc->type == IWN_MPDU_RX_DONE) {
3023 struct iwn_rx_mpdu *mpdu = (struct iwn_rx_mpdu *)(desc + 1);
3024 head = (caddr_t)(mpdu + 1);
3025 len = le16toh(mpdu->len);
3027 head = (caddr_t)(stat + 1) + stat->cfg_phy_len;
3028 len = le16toh(stat->len);
3031 flags = le32toh(*(uint32_t *)(head + len));
3033 /* Discard frames with a bad FCS early. */
3034 if ((flags & IWN_RX_NOERROR) != IWN_RX_NOERROR) {
3035 DPRINTF(sc, IWN_DEBUG_RECV, "%s: RX flags error %x\n",
3037 counter_u64_add(ic->ic_ierrors, 1);
3040 /* Discard frames that are too short. */
3041 if (len < sizeof (struct ieee80211_frame_ack)) {
3042 DPRINTF(sc, IWN_DEBUG_RECV, "%s: frame too short: %d\n",
3044 counter_u64_add(ic->ic_ierrors, 1);
3048 m1 = m_getjcl(M_NOWAIT, MT_DATA, M_PKTHDR, IWN_RBUF_SIZE);
3050 DPRINTF(sc, IWN_DEBUG_ANY, "%s: no mbuf to restock ring\n",
3052 counter_u64_add(ic->ic_ierrors, 1);
3055 bus_dmamap_unload(ring->data_dmat, data->map);
3057 error = bus_dmamap_load(ring->data_dmat, data->map, mtod(m1, void *),
3058 IWN_RBUF_SIZE, iwn_dma_map_addr, &paddr, BUS_DMA_NOWAIT);
3059 if (error != 0 && error != EFBIG) {
3060 device_printf(sc->sc_dev,
3061 "%s: bus_dmamap_load failed, error %d\n", __func__, error);
3064 /* Try to reload the old mbuf. */
3065 error = bus_dmamap_load(ring->data_dmat, data->map,
3066 mtod(data->m, void *), IWN_RBUF_SIZE, iwn_dma_map_addr,
3067 &paddr, BUS_DMA_NOWAIT);
3068 if (error != 0 && error != EFBIG) {
3069 panic("%s: could not load old RX mbuf", __func__);
3071 bus_dmamap_sync(ring->data_dmat, data->map,
3072 BUS_DMASYNC_PREREAD);
3073 /* Physical address may have changed. */
3074 ring->desc[ring->cur] = htole32(paddr >> 8);
3075 bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map,
3076 BUS_DMASYNC_PREWRITE);
3077 counter_u64_add(ic->ic_ierrors, 1);
3081 bus_dmamap_sync(ring->data_dmat, data->map,
3082 BUS_DMASYNC_PREREAD);
3086 /* Update RX descriptor. */
3087 ring->desc[ring->cur] = htole32(paddr >> 8);
3088 bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map,
3089 BUS_DMASYNC_PREWRITE);
3091 /* Finalize mbuf. */
3093 m->m_pkthdr.len = m->m_len = len;
3095 /* Grab a reference to the source node. */
3096 wh = mtod(m, struct ieee80211_frame *);
3097 if (len >= sizeof(struct ieee80211_frame_min))
3098 ni = ieee80211_find_rxnode(ic, (struct ieee80211_frame_min *)wh);
3101 nf = (ni != NULL && ni->ni_vap->iv_state == IEEE80211_S_RUN &&
3102 (ic->ic_flags & IEEE80211_F_SCAN) == 0) ? sc->noise : -95;
3104 rssi = ops->get_rssi(sc, stat);
3106 if (ieee80211_radiotap_active(ic)) {
3107 struct iwn_rx_radiotap_header *tap = &sc->sc_rxtap;
3108 uint32_t rate = le32toh(stat->rate);
3111 if (stat->flags & htole16(IWN_STAT_FLAG_SHPREAMBLE))
3112 tap->wr_flags |= IEEE80211_RADIOTAP_F_SHORTPRE;
3113 tap->wr_dbm_antsignal = (int8_t)rssi;
3114 tap->wr_dbm_antnoise = (int8_t)nf;
3115 tap->wr_tsft = stat->tstamp;
3116 if (rate & IWN_RFLAG_MCS) {
3117 tap->wr_rate = rate & IWN_RFLAG_RATE_MCS;
3118 tap->wr_rate |= IEEE80211_RATE_MCS;
3120 tap->wr_rate = plcp2rate(rate & IWN_RFLAG_RATE);
3124 * If it's a beacon and we're waiting, then do the
3125 * wakeup. This should unblock raw_xmit/start.
3127 if (sc->sc_beacon_wait) {
3128 uint8_t type, subtype;
3129 /* NB: Re-assign wh */
3130 wh = mtod(m, struct ieee80211_frame *);
3131 type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK;
3132 subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK;
3134 * This assumes at this point we've received our own
3137 DPRINTF(sc, IWN_DEBUG_TRACE,
3138 "%s: beacon_wait, type=%d, subtype=%d\n",
3139 __func__, type, subtype);
3140 if (type == IEEE80211_FC0_TYPE_MGT &&
3141 subtype == IEEE80211_FC0_SUBTYPE_BEACON) {
3142 DPRINTF(sc, IWN_DEBUG_TRACE | IWN_DEBUG_XMIT,
3143 "%s: waking things up\n", __func__);
3144 /* queue taskqueue to transmit! */
3145 taskqueue_enqueue(sc->sc_tq, &sc->sc_xmit_task);
3151 /* Send the frame to the 802.11 layer. */
3153 if (ni->ni_flags & IEEE80211_NODE_HT)
3154 m->m_flags |= M_AMPDU;
3155 (void)ieee80211_input(ni, m, rssi - nf, nf);
3156 /* Node is no longer needed. */
3157 ieee80211_free_node(ni);
3159 (void)ieee80211_input_all(ic, m, rssi - nf, nf);
3163 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__);
3167 /* Process an incoming Compressed BlockAck. */
3169 iwn_rx_compressed_ba(struct iwn_softc *sc, struct iwn_rx_desc *desc,
3170 struct iwn_rx_data *data)
3172 struct ieee80211_ratectl_tx_status *txs = &sc->sc_txs;
3173 struct iwn_ops *ops = &sc->ops;
3174 struct iwn_node *wn;
3175 struct ieee80211_node *ni;
3176 struct iwn_compressed_ba *ba = (struct iwn_compressed_ba *)(desc + 1);
3177 struct iwn_tx_ring *txq;
3178 struct iwn_tx_data *txdata;
3179 struct ieee80211_tx_ampdu *tap;
3184 int i, lastidx, qid, *res, shift;
3185 int tx_ok = 0, tx_err = 0;
3187 DPRINTF(sc, IWN_DEBUG_TRACE | IWN_DEBUG_XMIT, "->%s begin\n", __func__);
3189 bus_dmamap_sync(sc->rxq.data_dmat, data->map, BUS_DMASYNC_POSTREAD);
3191 qid = le16toh(ba->qid);
3192 txq = &sc->txq[ba->qid];
3193 tap = sc->qid2tap[ba->qid];
3195 wn = (void *)tap->txa_ni;
3199 if (!IEEE80211_AMPDU_RUNNING(tap)) {
3200 res = tap->txa_private;
3201 ssn = tap->txa_start & 0xfff;
3204 for (lastidx = le16toh(ba->ssn) & 0xff; txq->read != lastidx;) {
3205 txdata = &txq->data[txq->read];
3207 /* Unmap and free mbuf. */
3208 bus_dmamap_sync(txq->data_dmat, txdata->map,
3209 BUS_DMASYNC_POSTWRITE);
3210 bus_dmamap_unload(txq->data_dmat, txdata->map);
3211 m = txdata->m, txdata->m = NULL;
3212 ni = txdata->ni, txdata->ni = NULL;
3214 KASSERT(ni != NULL, ("no node"));
3215 KASSERT(m != NULL, ("no mbuf"));
3217 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: freeing m=%p\n", __func__, m);
3218 ieee80211_tx_complete(ni, m, 1);
3221 txq->read = (txq->read + 1) % IWN_TX_RING_COUNT;
3224 if (txq->queued == 0 && res != NULL) {
3226 ops->ampdu_tx_stop(sc, qid, tid, ssn);
3228 sc->qid2tap[qid] = NULL;
3229 free(res, M_DEVBUF);
3233 if (wn->agg[tid].bitmap == 0)
3236 shift = wn->agg[tid].startidx - ((le16toh(ba->seq) >> 4) & 0xff);
3240 if (wn->agg[tid].nframes > (64 - shift))
3244 * Walk the bitmap and calculate how many successful and failed
3245 * attempts are made.
3247 * Yes, the rate control code doesn't know these are A-MPDU
3248 * subframes and that it's okay to fail some of these.
3251 bitmap = (le64toh(ba->bitmap) >> shift) & wn->agg[tid].bitmap;
3252 for (i = 0; bitmap; i++) {
3253 txs->flags = 0; /* XXX TODO */
3254 if ((bitmap & 1) == 0) {
3256 txs->status = IEEE80211_RATECTL_TX_FAIL_UNSPECIFIED;
3259 txs->status = IEEE80211_RATECTL_TX_SUCCESS;
3261 ieee80211_ratectl_tx_complete(ni, txs);
3265 DPRINTF(sc, IWN_DEBUG_TRACE | IWN_DEBUG_XMIT,
3266 "->%s: end; %d ok; %d err\n",__func__, tx_ok, tx_err);
3271 * Process a CALIBRATION_RESULT notification sent by the initialization
3272 * firmware on response to a CMD_CALIB_CONFIG command (5000 only).
3275 iwn5000_rx_calib_results(struct iwn_softc *sc, struct iwn_rx_desc *desc,
3276 struct iwn_rx_data *data)
3278 struct iwn_phy_calib *calib = (struct iwn_phy_calib *)(desc + 1);
3281 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
3283 /* Runtime firmware should not send such a notification. */
3284 if (sc->sc_flags & IWN_FLAG_CALIB_DONE){
3285 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s received after clib done\n",
3289 len = (le32toh(desc->len) & 0x3fff) - 4;
3290 bus_dmamap_sync(sc->rxq.data_dmat, data->map, BUS_DMASYNC_POSTREAD);
3292 switch (calib->code) {
3293 case IWN5000_PHY_CALIB_DC:
3294 if (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_DC)
3297 case IWN5000_PHY_CALIB_LO:
3298 if (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_LO)
3301 case IWN5000_PHY_CALIB_TX_IQ:
3302 if (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_TX_IQ)
3305 case IWN5000_PHY_CALIB_TX_IQ_PERIODIC:
3306 if (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_TX_IQ_PERIODIC)
3309 case IWN5000_PHY_CALIB_BASE_BAND:
3310 if (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_BASE_BAND)
3314 if (idx == -1) /* Ignore other results. */
3317 /* Save calibration result. */
3318 if (sc->calibcmd[idx].buf != NULL)
3319 free(sc->calibcmd[idx].buf, M_DEVBUF);
3320 sc->calibcmd[idx].buf = malloc(len, M_DEVBUF, M_NOWAIT);
3321 if (sc->calibcmd[idx].buf == NULL) {
3322 DPRINTF(sc, IWN_DEBUG_CALIBRATE,
3323 "not enough memory for calibration result %d\n",
3327 DPRINTF(sc, IWN_DEBUG_CALIBRATE,
3328 "saving calibration result idx=%d, code=%d len=%d\n", idx, calib->code, len);
3329 sc->calibcmd[idx].len = len;
3330 memcpy(sc->calibcmd[idx].buf, calib, len);
3334 iwn_stats_update(struct iwn_softc *sc, struct iwn_calib_state *calib,
3335 struct iwn_stats *stats, int len)
3337 struct iwn_stats_bt *stats_bt;
3338 struct iwn_stats *lstats;
3341 * First - check whether the length is the bluetooth or normal.
3343 * If it's normal - just copy it and bump out.
3344 * Otherwise we have to convert things.
3347 if (len == sizeof(struct iwn_stats) + 4) {
3348 memcpy(&sc->last_stat, stats, sizeof(struct iwn_stats));
3349 sc->last_stat_valid = 1;
3354 * If it's not the bluetooth size - log, then just copy.
3356 if (len != sizeof(struct iwn_stats_bt) + 4) {
3357 DPRINTF(sc, IWN_DEBUG_STATS,
3358 "%s: size of rx statistics (%d) not an expected size!\n",
3361 memcpy(&sc->last_stat, stats, sizeof(struct iwn_stats));
3362 sc->last_stat_valid = 1;
3369 stats_bt = (struct iwn_stats_bt *) stats;
3370 lstats = &sc->last_stat;
3373 lstats->flags = stats_bt->flags;
3375 memcpy(&lstats->rx.ofdm, &stats_bt->rx_bt.ofdm,
3376 sizeof(struct iwn_rx_phy_stats));
3377 memcpy(&lstats->rx.cck, &stats_bt->rx_bt.cck,
3378 sizeof(struct iwn_rx_phy_stats));
3379 memcpy(&lstats->rx.general, &stats_bt->rx_bt.general_bt.common,
3380 sizeof(struct iwn_rx_general_stats));
3381 memcpy(&lstats->rx.ht, &stats_bt->rx_bt.ht,
3382 sizeof(struct iwn_rx_ht_phy_stats));
3384 memcpy(&lstats->tx, &stats_bt->tx,
3385 sizeof(struct iwn_tx_stats));
3387 memcpy(&lstats->general, &stats_bt->general,
3388 sizeof(struct iwn_general_stats));
3390 /* XXX TODO: Squirrel away the extra bluetooth stats somewhere */
3391 sc->last_stat_valid = 1;
3395 * Process an RX_STATISTICS or BEACON_STATISTICS firmware notification.
3396 * The latter is sent by the firmware after each received beacon.
3399 iwn_rx_statistics(struct iwn_softc *sc, struct iwn_rx_desc *desc,
3400 struct iwn_rx_data *data)
3402 struct iwn_ops *ops = &sc->ops;
3403 struct ieee80211com *ic = &sc->sc_ic;
3404 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps);
3405 struct iwn_calib_state *calib = &sc->calib;
3406 struct iwn_stats *stats = (struct iwn_stats *)(desc + 1);
3407 struct iwn_stats *lstats;
3410 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
3412 /* Ignore statistics received during a scan. */
3413 if (vap->iv_state != IEEE80211_S_RUN ||
3414 (ic->ic_flags & IEEE80211_F_SCAN)){
3415 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s received during calib\n",
3420 bus_dmamap_sync(sc->rxq.data_dmat, data->map, BUS_DMASYNC_POSTREAD);
3422 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_STATS,
3423 "%s: received statistics, cmd %d, len %d\n",
3424 __func__, desc->type, le16toh(desc->len));
3425 sc->calib_cnt = 0; /* Reset TX power calibration timeout. */
3428 * Collect/track general statistics for reporting.
3430 * This takes care of ensuring that the bluetooth sized message
3431 * will be correctly converted to the legacy sized message.
3433 iwn_stats_update(sc, calib, stats, le16toh(desc->len));
3436 * And now, let's take a reference of it to use!
3438 lstats = &sc->last_stat;
3440 /* Test if temperature has changed. */
3441 if (lstats->general.temp != sc->rawtemp) {
3442 /* Convert "raw" temperature to degC. */
3443 sc->rawtemp = stats->general.temp;
3444 temp = ops->get_temperature(sc);
3445 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "%s: temperature %d\n",
3448 /* Update TX power if need be (4965AGN only). */
3449 if (sc->hw_type == IWN_HW_REV_TYPE_4965)
3450 iwn4965_power_calibration(sc, temp);
3453 if (desc->type != IWN_BEACON_STATISTICS)
3454 return; /* Reply to a statistics request. */
3456 sc->noise = iwn_get_noise(&lstats->rx.general);
3457 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "%s: noise %d\n", __func__, sc->noise);
3459 /* Test that RSSI and noise are present in stats report. */
3460 if (le32toh(lstats->rx.general.flags) != 1) {
3461 DPRINTF(sc, IWN_DEBUG_ANY, "%s\n",
3462 "received statistics without RSSI");
3466 if (calib->state == IWN_CALIB_STATE_ASSOC)
3467 iwn_collect_noise(sc, &lstats->rx.general);
3468 else if (calib->state == IWN_CALIB_STATE_RUN) {
3469 iwn_tune_sensitivity(sc, &lstats->rx);
3471 * XXX TODO: Only run the RX recovery if we're associated!
3473 iwn_check_rx_recovery(sc, lstats);
3474 iwn_save_stats_counters(sc, lstats);
3477 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__);
3481 * Save the relevant statistic counters for the next calibration
3485 iwn_save_stats_counters(struct iwn_softc *sc, const struct iwn_stats *rs)
3487 struct iwn_calib_state *calib = &sc->calib;
3489 /* Save counters values for next call. */
3490 calib->bad_plcp_cck = le32toh(rs->rx.cck.bad_plcp);
3491 calib->fa_cck = le32toh(rs->rx.cck.fa);
3492 calib->bad_plcp_ht = le32toh(rs->rx.ht.bad_plcp);
3493 calib->bad_plcp_ofdm = le32toh(rs->rx.ofdm.bad_plcp);
3494 calib->fa_ofdm = le32toh(rs->rx.ofdm.fa);
3496 /* Last time we received these tick values */
3497 sc->last_calib_ticks = ticks;
3501 * Process a TX_DONE firmware notification. Unfortunately, the 4965AGN
3502 * and 5000 adapters have different incompatible TX status formats.
3505 iwn4965_tx_done(struct iwn_softc *sc, struct iwn_rx_desc *desc,
3506 struct iwn_rx_data *data)
3508 struct iwn4965_tx_stat *stat = (struct iwn4965_tx_stat *)(desc + 1);
3509 struct iwn_tx_ring *ring;
3512 qid = desc->qid & 0xf;
3513 ring = &sc->txq[qid];
3515 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: "
3516 "qid %d idx %d RTS retries %d ACK retries %d nkill %d rate %x duration %d status %x\n",
3517 __func__, desc->qid, desc->idx,
3521 stat->rate, le16toh(stat->duration),
3522 le32toh(stat->status));
3524 bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_POSTREAD);
3525 if (qid >= sc->firstaggqueue) {
3526 iwn_ampdu_tx_done(sc, qid, desc->idx, stat->nframes,
3527 stat->rtsfailcnt, stat->ackfailcnt, &stat->status);
3529 iwn_tx_done(sc, desc, stat->rtsfailcnt, stat->ackfailcnt,
3530 le32toh(stat->status) & 0xff);
3535 iwn5000_tx_done(struct iwn_softc *sc, struct iwn_rx_desc *desc,
3536 struct iwn_rx_data *data)
3538 struct iwn5000_tx_stat *stat = (struct iwn5000_tx_stat *)(desc + 1);
3539 struct iwn_tx_ring *ring;
3542 qid = desc->qid & 0xf;
3543 ring = &sc->txq[qid];
3545 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: "
3546 "qid %d idx %d RTS retries %d ACK retries %d nkill %d rate %x duration %d status %x\n",
3547 __func__, desc->qid, desc->idx,
3551 stat->rate, le16toh(stat->duration),
3552 le32toh(stat->status));
3555 /* Reset TX scheduler slot. */
3556 iwn5000_reset_sched(sc, desc->qid & 0xf, desc->idx);
3559 bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_POSTREAD);
3560 if (qid >= sc->firstaggqueue) {
3561 iwn_ampdu_tx_done(sc, qid, desc->idx, stat->nframes,
3562 stat->rtsfailcnt, stat->ackfailcnt, &stat->status);
3564 iwn_tx_done(sc, desc, stat->rtsfailcnt, stat->ackfailcnt,
3565 le16toh(stat->status) & 0xff);
3570 * Adapter-independent backend for TX_DONE firmware notifications.
3573 iwn_tx_done(struct iwn_softc *sc, struct iwn_rx_desc *desc, int rtsfailcnt,
3574 int ackfailcnt, uint8_t status)
3576 struct ieee80211_ratectl_tx_status *txs = &sc->sc_txs;
3577 struct iwn_tx_ring *ring = &sc->txq[desc->qid & 0xf];
3578 struct iwn_tx_data *data = &ring->data[desc->idx];
3580 struct ieee80211_node *ni;
3582 KASSERT(data->ni != NULL, ("no node"));
3584 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
3586 /* Unmap and free mbuf. */
3587 bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_POSTWRITE);
3588 bus_dmamap_unload(ring->data_dmat, data->map);
3589 m = data->m, data->m = NULL;
3590 ni = data->ni, data->ni = NULL;
3593 * Update rate control statistics for the node.
3595 txs->flags = IEEE80211_RATECTL_STATUS_SHORT_RETRY |
3596 IEEE80211_RATECTL_STATUS_LONG_RETRY;
3597 txs->short_retries = rtsfailcnt;
3598 txs->long_retries = ackfailcnt;
3599 if (!(status & IWN_TX_FAIL))
3600 txs->status = IEEE80211_RATECTL_TX_SUCCESS;
3603 case IWN_TX_FAIL_SHORT_LIMIT:
3604 txs->status = IEEE80211_RATECTL_TX_FAIL_SHORT;
3606 case IWN_TX_FAIL_LONG_LIMIT:
3607 txs->status = IEEE80211_RATECTL_TX_FAIL_LONG;
3609 case IWN_TX_STATUS_FAIL_LIFE_EXPIRE:
3610 txs->status = IEEE80211_RATECTL_TX_FAIL_EXPIRED;
3613 txs->status = IEEE80211_RATECTL_TX_FAIL_UNSPECIFIED;
3617 ieee80211_ratectl_tx_complete(ni, txs);
3620 * Channels marked for "radar" require traffic to be received
3621 * to unlock before we can transmit. Until traffic is seen
3622 * any attempt to transmit is returned immediately with status
3623 * set to IWN_TX_FAIL_TX_LOCKED. Unfortunately this can easily
3624 * happen on first authenticate after scanning. To workaround
3625 * this we ignore a failure of this sort in AUTH state so the
3626 * 802.11 layer will fall back to using a timeout to wait for
3627 * the AUTH reply. This allows the firmware time to see
3628 * traffic so a subsequent retry of AUTH succeeds. It's
3629 * unclear why the firmware does not maintain state for
3630 * channels recently visited as this would allow immediate
3631 * use of the channel after a scan (where we see traffic).
3633 if (status == IWN_TX_FAIL_TX_LOCKED &&
3634 ni->ni_vap->iv_state == IEEE80211_S_AUTH)
3635 ieee80211_tx_complete(ni, m, 0);
3637 ieee80211_tx_complete(ni, m,
3638 (status & IWN_TX_FAIL) != 0);
3640 sc->sc_tx_timer = 0;
3641 if (--ring->queued < IWN_TX_RING_LOMARK)
3642 sc->qfullmsk &= ~(1 << ring->qid);
3644 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__);
3648 * Process a "command done" firmware notification. This is where we wakeup
3649 * processes waiting for a synchronous command completion.
3652 iwn_cmd_done(struct iwn_softc *sc, struct iwn_rx_desc *desc)
3654 struct iwn_tx_ring *ring;
3655 struct iwn_tx_data *data;
3658 if (sc->sc_flags & IWN_FLAG_PAN_SUPPORT)
3659 cmd_queue_num = IWN_PAN_CMD_QUEUE;
3661 cmd_queue_num = IWN_CMD_QUEUE_NUM;
3663 if ((desc->qid & IWN_RX_DESC_QID_MSK) != cmd_queue_num)
3664 return; /* Not a command ack. */
3666 ring = &sc->txq[cmd_queue_num];
3667 data = &ring->data[desc->idx];
3669 /* If the command was mapped in an mbuf, free it. */
3670 if (data->m != NULL) {
3671 bus_dmamap_sync(ring->data_dmat, data->map,
3672 BUS_DMASYNC_POSTWRITE);
3673 bus_dmamap_unload(ring->data_dmat, data->map);
3677 wakeup(&ring->desc[desc->idx]);
3681 iwn_ampdu_tx_done(struct iwn_softc *sc, int qid, int idx, int nframes,
3682 int rtsfailcnt, int ackfailcnt, void *stat)
3684 struct iwn_ops *ops = &sc->ops;
3685 struct iwn_tx_ring *ring = &sc->txq[qid];
3686 struct ieee80211_ratectl_tx_status *txs = &sc->sc_txs;
3687 struct iwn_tx_data *data;
3689 struct iwn_node *wn;
3690 struct ieee80211_node *ni;
3691 struct ieee80211_tx_ampdu *tap;
3693 uint32_t *status = stat;
3694 uint16_t *aggstatus = stat;
3697 int bit, i, lastidx, *res, seqno, shift, start;
3699 /* XXX TODO: status is le16 field! Grr */
3701 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
3702 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: nframes=%d, status=0x%08x\n",
3707 tap = sc->qid2tap[qid];
3709 wn = (void *)tap->txa_ni;
3713 * XXX TODO: ACK and RTS failures would be nice here!
3717 * A-MPDU single frame status - if we failed to transmit it
3718 * in A-MPDU, then it may be a permanent failure.
3720 * XXX TODO: check what the Linux iwlwifi driver does here;
3721 * there's some permanent and temporary failures that may be
3722 * handled differently.
3725 txs->flags = IEEE80211_RATECTL_STATUS_SHORT_RETRY |
3726 IEEE80211_RATECTL_STATUS_LONG_RETRY;
3727 txs->short_retries = rtsfailcnt;
3728 txs->long_retries = ackfailcnt;
3729 if ((*status & 0xff) != 1 && (*status & 0xff) != 2) {
3731 printf("ieee80211_send_bar()\n");
3734 * If we completely fail a transmit, make sure a
3735 * notification is pushed up to the rate control
3739 txs->status = IEEE80211_RATECTL_TX_FAIL_UNSPECIFIED;
3742 * If nframes=1, then we won't be getting a BA for
3743 * this frame. Ensure that we correctly update the
3744 * rate control code with how many retries were
3745 * needed to send it.
3747 txs->status = IEEE80211_RATECTL_TX_SUCCESS;
3749 ieee80211_ratectl_tx_complete(ni, txs);
3754 for (i = 0; i < nframes; i++) {
3755 if (le16toh(aggstatus[i * 2]) & 0xc)
3758 idx = le16toh(aggstatus[2*i + 1]) & 0xff;
3762 shift = 0x100 - idx + start;
3765 } else if (bit <= -64)
3766 bit = 0x100 - start + idx;
3768 shift = start - idx;
3772 bitmap = bitmap << shift;
3773 bitmap |= 1ULL << bit;
3775 tap = sc->qid2tap[qid];
3777 wn = (void *)tap->txa_ni;
3778 wn->agg[tid].bitmap = bitmap;
3779 wn->agg[tid].startidx = start;
3780 wn->agg[tid].nframes = nframes;
3784 if (!IEEE80211_AMPDU_RUNNING(tap)) {
3785 res = tap->txa_private;
3786 ssn = tap->txa_start & 0xfff;
3789 /* This is going nframes DWORDS into the descriptor? */
3790 seqno = le32toh(*(status + nframes)) & 0xfff;
3791 for (lastidx = (seqno & 0xff); ring->read != lastidx;) {
3792 data = &ring->data[ring->read];
3794 /* Unmap and free mbuf. */
3795 bus_dmamap_sync(ring->data_dmat, data->map,
3796 BUS_DMASYNC_POSTWRITE);
3797 bus_dmamap_unload(ring->data_dmat, data->map);
3798 m = data->m, data->m = NULL;
3799 ni = data->ni, data->ni = NULL;
3801 KASSERT(ni != NULL, ("no node"));
3802 KASSERT(m != NULL, ("no mbuf"));
3803 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: freeing m=%p\n", __func__, m);
3804 ieee80211_tx_complete(ni, m, 1);
3807 ring->read = (ring->read + 1) % IWN_TX_RING_COUNT;
3810 if (ring->queued == 0 && res != NULL) {
3812 ops->ampdu_tx_stop(sc, qid, tid, ssn);
3814 sc->qid2tap[qid] = NULL;
3815 free(res, M_DEVBUF);
3819 sc->sc_tx_timer = 0;
3820 if (ring->queued < IWN_TX_RING_LOMARK)
3821 sc->qfullmsk &= ~(1 << ring->qid);
3823 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__);
3827 * Process an INT_FH_RX or INT_SW_RX interrupt.
3830 iwn_notif_intr(struct iwn_softc *sc)
3832 struct iwn_ops *ops = &sc->ops;
3833 struct ieee80211com *ic = &sc->sc_ic;
3834 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps);
3837 bus_dmamap_sync(sc->rxq.stat_dma.tag, sc->rxq.stat_dma.map,
3838 BUS_DMASYNC_POSTREAD);
3840 hw = le16toh(sc->rxq.stat->closed_count) & 0xfff;
3841 while (sc->rxq.cur != hw) {
3842 struct iwn_rx_data *data = &sc->rxq.data[sc->rxq.cur];
3843 struct iwn_rx_desc *desc;
3845 bus_dmamap_sync(sc->rxq.data_dmat, data->map,
3846 BUS_DMASYNC_POSTREAD);
3847 desc = mtod(data->m, struct iwn_rx_desc *);
3849 DPRINTF(sc, IWN_DEBUG_RECV,
3850 "%s: cur=%d; qid %x idx %d flags %x type %d(%s) len %d\n",
3851 __func__, sc->rxq.cur, desc->qid & 0xf, desc->idx, desc->flags,
3852 desc->type, iwn_intr_str(desc->type),
3853 le16toh(desc->len));
3855 if (!(desc->qid & IWN_UNSOLICITED_RX_NOTIF)) /* Reply to a command. */
3856 iwn_cmd_done(sc, desc);
3858 switch (desc->type) {
3860 iwn_rx_phy(sc, desc, data);
3863 case IWN_RX_DONE: /* 4965AGN only. */
3864 case IWN_MPDU_RX_DONE:
3865 /* An 802.11 frame has been received. */
3866 iwn_rx_done(sc, desc, data);
3869 case IWN_RX_COMPRESSED_BA:
3870 /* A Compressed BlockAck has been received. */
3871 iwn_rx_compressed_ba(sc, desc, data);
3875 /* An 802.11 frame has been transmitted. */
3876 ops->tx_done(sc, desc, data);
3879 case IWN_RX_STATISTICS:
3880 case IWN_BEACON_STATISTICS:
3881 iwn_rx_statistics(sc, desc, data);
3884 case IWN_BEACON_MISSED:
3886 struct iwn_beacon_missed *miss =
3887 (struct iwn_beacon_missed *)(desc + 1);
3890 bus_dmamap_sync(sc->rxq.data_dmat, data->map,
3891 BUS_DMASYNC_POSTREAD);
3892 misses = le32toh(miss->consecutive);
3894 DPRINTF(sc, IWN_DEBUG_STATE,
3895 "%s: beacons missed %d/%d\n", __func__,
3896 misses, le32toh(miss->total));
3898 * If more than 5 consecutive beacons are missed,
3899 * reinitialize the sensitivity state machine.
3901 if (vap->iv_state == IEEE80211_S_RUN &&
3902 (ic->ic_flags & IEEE80211_F_SCAN) == 0) {
3904 (void)iwn_init_sensitivity(sc);
3905 if (misses >= vap->iv_bmissthreshold) {
3907 ieee80211_beacon_miss(ic);
3915 struct iwn_ucode_info *uc =
3916 (struct iwn_ucode_info *)(desc + 1);
3918 /* The microcontroller is ready. */
3919 bus_dmamap_sync(sc->rxq.data_dmat, data->map,
3920 BUS_DMASYNC_POSTREAD);
3921 DPRINTF(sc, IWN_DEBUG_RESET,
3922 "microcode alive notification version=%d.%d "
3923 "subtype=%x alive=%x\n", uc->major, uc->minor,
3924 uc->subtype, le32toh(uc->valid));
3926 if (le32toh(uc->valid) != 1) {
3927 device_printf(sc->sc_dev,
3928 "microcontroller initialization failed");
3931 if (uc->subtype == IWN_UCODE_INIT) {
3932 /* Save microcontroller report. */
3933 memcpy(&sc->ucode_info, uc, sizeof (*uc));
3935 /* Save the address of the error log in SRAM. */
3936 sc->errptr = le32toh(uc->errptr);
3939 case IWN_STATE_CHANGED:
3942 * State change allows hardware switch change to be
3943 * noted. However, we handle this in iwn_intr as we
3944 * get both the enable/disble intr.
3946 bus_dmamap_sync(sc->rxq.data_dmat, data->map,
3947 BUS_DMASYNC_POSTREAD);
3949 uint32_t *status = (uint32_t *)(desc + 1);
3950 DPRINTF(sc, IWN_DEBUG_INTR | IWN_DEBUG_STATE,
3951 "state changed to %x\n",
3956 case IWN_START_SCAN:
3958 bus_dmamap_sync(sc->rxq.data_dmat, data->map,
3959 BUS_DMASYNC_POSTREAD);
3961 struct iwn_start_scan *scan =
3962 (struct iwn_start_scan *)(desc + 1);
3963 DPRINTF(sc, IWN_DEBUG_ANY,
3964 "%s: scanning channel %d status %x\n",
3965 __func__, scan->chan, le32toh(scan->status));
3971 bus_dmamap_sync(sc->rxq.data_dmat, data->map,
3972 BUS_DMASYNC_POSTREAD);
3974 struct iwn_stop_scan *scan =
3975 (struct iwn_stop_scan *)(desc + 1);
3976 DPRINTF(sc, IWN_DEBUG_STATE | IWN_DEBUG_SCAN,
3977 "scan finished nchan=%d status=%d chan=%d\n",
3978 scan->nchan, scan->status, scan->chan);
3980 sc->sc_is_scanning = 0;
3981 callout_stop(&sc->scan_timeout);
3983 ieee80211_scan_next(vap);
3987 case IWN5000_CALIBRATION_RESULT:
3988 iwn5000_rx_calib_results(sc, desc, data);
3991 case IWN5000_CALIBRATION_DONE:
3992 sc->sc_flags |= IWN_FLAG_CALIB_DONE;
3997 sc->rxq.cur = (sc->rxq.cur + 1) % IWN_RX_RING_COUNT;
4000 /* Tell the firmware what we have processed. */
4001 hw = (hw == 0) ? IWN_RX_RING_COUNT - 1 : hw - 1;
4002 IWN_WRITE(sc, IWN_FH_RX_WPTR, hw & ~7);
4006 * Process an INT_WAKEUP interrupt raised when the microcontroller wakes up
4007 * from power-down sleep mode.
4010 iwn_wakeup_intr(struct iwn_softc *sc)
4014 DPRINTF(sc, IWN_DEBUG_RESET, "%s: ucode wakeup from power-down sleep\n",
4017 /* Wakeup RX and TX rings. */
4018 IWN_WRITE(sc, IWN_FH_RX_WPTR, sc->rxq.cur & ~7);
4019 for (qid = 0; qid < sc->ntxqs; qid++) {
4020 struct iwn_tx_ring *ring = &sc->txq[qid];
4021 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | ring->cur);
4026 iwn_rftoggle_task(void *arg, int npending)
4028 struct iwn_softc *sc = arg;
4029 struct ieee80211com *ic = &sc->sc_ic;
4033 tmp = IWN_READ(sc, IWN_GP_CNTRL);
4036 device_printf(sc->sc_dev, "RF switch: radio %s\n",
4037 (tmp & IWN_GP_CNTRL_RFKILL) ? "enabled" : "disabled");
4038 if (!(tmp & IWN_GP_CNTRL_RFKILL)) {
4039 ieee80211_suspend_all(ic);
4041 /* Enable interrupts to get RF toggle notification. */
4043 IWN_WRITE(sc, IWN_INT, 0xffffffff);
4044 IWN_WRITE(sc, IWN_INT_MASK, sc->int_mask);
4047 ieee80211_resume_all(ic);
4051 * Dump the error log of the firmware when a firmware panic occurs. Although
4052 * we can't debug the firmware because it is neither open source nor free, it
4053 * can help us to identify certain classes of problems.
4056 iwn_fatal_intr(struct iwn_softc *sc)
4058 struct iwn_fw_dump dump;
4061 IWN_LOCK_ASSERT(sc);
4063 /* Force a complete recalibration on next init. */
4064 sc->sc_flags &= ~IWN_FLAG_CALIB_DONE;
4066 /* Check that the error log address is valid. */
4067 if (sc->errptr < IWN_FW_DATA_BASE ||
4068 sc->errptr + sizeof (dump) >
4069 IWN_FW_DATA_BASE + sc->fw_data_maxsz) {
4070 printf("%s: bad firmware error log address 0x%08x\n", __func__,
4074 if (iwn_nic_lock(sc) != 0) {
4075 printf("%s: could not read firmware error log\n", __func__);
4078 /* Read firmware error log from SRAM. */
4079 iwn_mem_read_region_4(sc, sc->errptr, (uint32_t *)&dump,
4080 sizeof (dump) / sizeof (uint32_t));
4083 if (dump.valid == 0) {
4084 printf("%s: firmware error log is empty\n", __func__);
4087 printf("firmware error log:\n");
4088 printf(" error type = \"%s\" (0x%08X)\n",
4089 (dump.id < nitems(iwn_fw_errmsg)) ?
4090 iwn_fw_errmsg[dump.id] : "UNKNOWN",
4092 printf(" program counter = 0x%08X\n", dump.pc);
4093 printf(" source line = 0x%08X\n", dump.src_line);
4094 printf(" error data = 0x%08X%08X\n",
4095 dump.error_data[0], dump.error_data[1]);
4096 printf(" branch link = 0x%08X%08X\n",
4097 dump.branch_link[0], dump.branch_link[1]);
4098 printf(" interrupt link = 0x%08X%08X\n",
4099 dump.interrupt_link[0], dump.interrupt_link[1]);
4100 printf(" time = %u\n", dump.time[0]);
4102 /* Dump driver status (TX and RX rings) while we're here. */
4103 printf("driver status:\n");
4104 for (i = 0; i < sc->ntxqs; i++) {
4105 struct iwn_tx_ring *ring = &sc->txq[i];
4106 printf(" tx ring %2d: qid=%-2d cur=%-3d queued=%-3d\n",
4107 i, ring->qid, ring->cur, ring->queued);
4109 printf(" rx ring: cur=%d\n", sc->rxq.cur);
4115 struct iwn_softc *sc = arg;
4116 uint32_t r1, r2, tmp;
4120 /* Disable interrupts. */
4121 IWN_WRITE(sc, IWN_INT_MASK, 0);
4123 /* Read interrupts from ICT (fast) or from registers (slow). */
4124 if (sc->sc_flags & IWN_FLAG_USE_ICT) {
4125 bus_dmamap_sync(sc->ict_dma.tag, sc->ict_dma.map,
4126 BUS_DMASYNC_POSTREAD);
4128 while (sc->ict[sc->ict_cur] != 0) {
4129 tmp |= sc->ict[sc->ict_cur];
4130 sc->ict[sc->ict_cur] = 0; /* Acknowledge. */
4131 sc->ict_cur = (sc->ict_cur + 1) % IWN_ICT_COUNT;
4134 if (tmp == 0xffffffff) /* Shouldn't happen. */
4136 else if (tmp & 0xc0000) /* Workaround a HW bug. */
4138 r1 = (tmp & 0xff00) << 16 | (tmp & 0xff);
4139 r2 = 0; /* Unused. */
4141 r1 = IWN_READ(sc, IWN_INT);
4142 if (r1 == 0xffffffff || (r1 & 0xfffffff0) == 0xa5a5a5a0) {
4144 return; /* Hardware gone! */
4146 r2 = IWN_READ(sc, IWN_FH_INT);
4149 DPRINTF(sc, IWN_DEBUG_INTR, "interrupt reg1=0x%08x reg2=0x%08x\n"
4152 if (r1 == 0 && r2 == 0)
4153 goto done; /* Interrupt not for us. */
4155 /* Acknowledge interrupts. */
4156 IWN_WRITE(sc, IWN_INT, r1);
4157 if (!(sc->sc_flags & IWN_FLAG_USE_ICT))
4158 IWN_WRITE(sc, IWN_FH_INT, r2);
4160 if (r1 & IWN_INT_RF_TOGGLED) {
4161 taskqueue_enqueue(sc->sc_tq, &sc->sc_rftoggle_task);
4164 if (r1 & IWN_INT_CT_REACHED) {
4165 device_printf(sc->sc_dev, "%s: critical temperature reached!\n",
4168 if (r1 & (IWN_INT_SW_ERR | IWN_INT_HW_ERR)) {
4169 device_printf(sc->sc_dev, "%s: fatal firmware error\n",
4172 iwn_debug_register(sc);
4174 /* Dump firmware error log and stop. */
4177 taskqueue_enqueue(sc->sc_tq, &sc->sc_panic_task);
4180 if ((r1 & (IWN_INT_FH_RX | IWN_INT_SW_RX | IWN_INT_RX_PERIODIC)) ||
4181 (r2 & IWN_FH_INT_RX)) {
4182 if (sc->sc_flags & IWN_FLAG_USE_ICT) {
4183 if (r1 & (IWN_INT_FH_RX | IWN_INT_SW_RX))
4184 IWN_WRITE(sc, IWN_FH_INT, IWN_FH_INT_RX);
4185 IWN_WRITE_1(sc, IWN_INT_PERIODIC,
4186 IWN_INT_PERIODIC_DIS);
4188 if (r1 & (IWN_INT_FH_RX | IWN_INT_SW_RX)) {
4189 IWN_WRITE_1(sc, IWN_INT_PERIODIC,
4190 IWN_INT_PERIODIC_ENA);
4196 if ((r1 & IWN_INT_FH_TX) || (r2 & IWN_FH_INT_TX)) {
4197 if (sc->sc_flags & IWN_FLAG_USE_ICT)
4198 IWN_WRITE(sc, IWN_FH_INT, IWN_FH_INT_TX);
4199 wakeup(sc); /* FH DMA transfer completed. */
4202 if (r1 & IWN_INT_ALIVE)
4203 wakeup(sc); /* Firmware is alive. */
4205 if (r1 & IWN_INT_WAKEUP)
4206 iwn_wakeup_intr(sc);
4209 /* Re-enable interrupts. */
4210 if (sc->sc_flags & IWN_FLAG_RUNNING)
4211 IWN_WRITE(sc, IWN_INT_MASK, sc->int_mask);
4217 * Update TX scheduler ring when transmitting an 802.11 frame (4965AGN and
4218 * 5000 adapters use a slightly different format).
4221 iwn4965_update_sched(struct iwn_softc *sc, int qid, int idx, uint8_t id,
4224 uint16_t *w = &sc->sched[qid * IWN4965_SCHED_COUNT + idx];
4226 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
4228 *w = htole16(len + 8);
4229 bus_dmamap_sync(sc->sched_dma.tag, sc->sched_dma.map,
4230 BUS_DMASYNC_PREWRITE);
4231 if (idx < IWN_SCHED_WINSZ) {
4232 *(w + IWN_TX_RING_COUNT) = *w;
4233 bus_dmamap_sync(sc->sched_dma.tag, sc->sched_dma.map,
4234 BUS_DMASYNC_PREWRITE);
4239 iwn5000_update_sched(struct iwn_softc *sc, int qid, int idx, uint8_t id,
4242 uint16_t *w = &sc->sched[qid * IWN5000_SCHED_COUNT + idx];
4244 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
4246 *w = htole16(id << 12 | (len + 8));
4247 bus_dmamap_sync(sc->sched_dma.tag, sc->sched_dma.map,
4248 BUS_DMASYNC_PREWRITE);
4249 if (idx < IWN_SCHED_WINSZ) {
4250 *(w + IWN_TX_RING_COUNT) = *w;
4251 bus_dmamap_sync(sc->sched_dma.tag, sc->sched_dma.map,
4252 BUS_DMASYNC_PREWRITE);
4258 iwn5000_reset_sched(struct iwn_softc *sc, int qid, int idx)
4260 uint16_t *w = &sc->sched[qid * IWN5000_SCHED_COUNT + idx];
4262 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
4264 *w = (*w & htole16(0xf000)) | htole16(1);
4265 bus_dmamap_sync(sc->sched_dma.tag, sc->sched_dma.map,
4266 BUS_DMASYNC_PREWRITE);
4267 if (idx < IWN_SCHED_WINSZ) {
4268 *(w + IWN_TX_RING_COUNT) = *w;
4269 bus_dmamap_sync(sc->sched_dma.tag, sc->sched_dma.map,
4270 BUS_DMASYNC_PREWRITE);
4276 * Check whether OFDM 11g protection will be enabled for the given rate.
4278 * The original driver code only enabled protection for OFDM rates.
4279 * It didn't check to see whether it was operating in 11a or 11bg mode.
4282 iwn_check_rate_needs_protection(struct iwn_softc *sc,
4283 struct ieee80211vap *vap, uint8_t rate)
4285 struct ieee80211com *ic = vap->iv_ic;
4288 * Not in 2GHz mode? Then there's no need to enable OFDM
4291 if (! IEEE80211_IS_CHAN_2GHZ(ic->ic_curchan)) {
4296 * 11bg protection not enabled? Then don't use it.
4298 if ((ic->ic_flags & IEEE80211_F_USEPROT) == 0)
4302 * If it's an 11n rate - no protection.
4303 * We'll do it via a specific 11n check.
4305 if (rate & IEEE80211_RATE_MCS) {
4310 * Do a rate table lookup. If the PHY is CCK,
4311 * don't do protection.
4313 if (ieee80211_rate2phytype(ic->ic_rt, rate) == IEEE80211_T_CCK)
4317 * Yup, enable protection.
4323 * return a value between 0 and IWN_MAX_TX_RETRIES-1 as an index into
4324 * the link quality table that reflects this particular entry.
4327 iwn_tx_rate_to_linkq_offset(struct iwn_softc *sc, struct ieee80211_node *ni,
4330 struct ieee80211_rateset *rs;
4337 * Figure out if we're using 11n or not here.
4339 if (IEEE80211_IS_CHAN_HT(ni->ni_chan) && ni->ni_htrates.rs_nrates > 0)
4345 * Use the correct rate table.
4348 rs = (struct ieee80211_rateset *) &ni->ni_htrates;
4349 nr = ni->ni_htrates.rs_nrates;
4356 * Find the relevant link quality entry in the table.
4358 for (i = 0; i < nr && i < IWN_MAX_TX_RETRIES - 1 ; i++) {
4360 * The link quality table index starts at 0 == highest
4361 * rate, so we walk the rate table backwards.
4363 cmp_rate = rs->rs_rates[(nr - 1) - i];
4364 if (rate & IEEE80211_RATE_MCS)
4365 cmp_rate |= IEEE80211_RATE_MCS;
4368 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: idx %d: nr=%d, rate=0x%02x, rateentry=0x%02x\n",
4376 if (cmp_rate == rate)
4380 /* Failed? Start at the end */
4381 return (IWN_MAX_TX_RETRIES - 1);
4385 iwn_tx_data(struct iwn_softc *sc, struct mbuf *m, struct ieee80211_node *ni)
4387 struct iwn_ops *ops = &sc->ops;
4388 const struct ieee80211_txparam *tp = ni->ni_txparms;
4389 struct ieee80211vap *vap = ni->ni_vap;
4390 struct ieee80211com *ic = ni->ni_ic;
4391 struct iwn_node *wn = (void *)ni;
4392 struct iwn_tx_ring *ring;
4393 struct iwn_tx_desc *desc;
4394 struct iwn_tx_data *data;
4395 struct iwn_tx_cmd *cmd;
4396 struct iwn_cmd_data *tx;
4397 struct ieee80211_frame *wh;
4398 struct ieee80211_key *k = NULL;
4403 bus_dma_segment_t *seg, segs[IWN_MAX_SCATTER];
4405 int ac, i, totlen, error, pad, nsegs = 0, rate;
4407 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
4409 IWN_LOCK_ASSERT(sc);
4411 wh = mtod(m, struct ieee80211_frame *);
4412 hdrlen = ieee80211_anyhdrsize(wh);
4413 type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK;
4415 /* Select EDCA Access Category and TX ring for this frame. */
4416 if (IEEE80211_QOS_HAS_SEQ(wh)) {
4417 qos = ((const struct ieee80211_qosframe *)wh)->i_qos[0];
4418 tid = qos & IEEE80211_QOS_TID;
4423 ac = M_WME_GETAC(m);
4426 * XXX TODO: Group addressed frames aren't aggregated and must
4427 * go to the normal non-aggregation queue, and have a NONQOS TID
4428 * assigned from net80211.
4431 if (m->m_flags & M_AMPDU_MPDU) {
4433 struct ieee80211_tx_ampdu *tap = &ni->ni_tx_ampdu[ac];
4435 if (!IEEE80211_AMPDU_RUNNING(tap)) {
4440 * Queue this frame to the hardware ring that we've
4441 * negotiated AMPDU TX on.
4443 * Note that the sequence number must match the TX slot
4446 ac = *(int *)tap->txa_private;
4447 seqno = ni->ni_txseqs[tid];
4448 *(uint16_t *)wh->i_seq =
4449 htole16(seqno << IEEE80211_SEQ_SEQ_SHIFT);
4450 ring = &sc->txq[ac];
4451 if ((seqno % 256) != ring->cur) {
4452 device_printf(sc->sc_dev,
4453 "%s: m=%p: seqno (%d) (%d) != ring index (%d) !\n",
4460 ni->ni_txseqs[tid]++;
4462 ring = &sc->txq[ac];
4463 desc = &ring->desc[ring->cur];
4464 data = &ring->data[ring->cur];
4466 /* Choose a TX rate index. */
4467 if (type == IEEE80211_FC0_TYPE_MGT ||
4468 type == IEEE80211_FC0_TYPE_CTL ||
4469 (m->m_flags & M_EAPOL) != 0)
4470 rate = tp->mgmtrate;
4471 else if (IEEE80211_IS_MULTICAST(wh->i_addr1))
4472 rate = tp->mcastrate;
4473 else if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE)
4474 rate = tp->ucastrate;
4476 /* XXX pass pktlen */
4477 (void) ieee80211_ratectl_rate(ni, NULL, 0);
4478 rate = ni->ni_txrate;
4481 /* Encrypt the frame if need be. */
4482 if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) {
4483 /* Retrieve key for TX. */
4484 k = ieee80211_crypto_encap(ni, m);
4488 /* 802.11 header may have moved. */
4489 wh = mtod(m, struct ieee80211_frame *);
4491 totlen = m->m_pkthdr.len;
4493 if (ieee80211_radiotap_active_vap(vap)) {
4494 struct iwn_tx_radiotap_header *tap = &sc->sc_txtap;
4497 tap->wt_rate = rate;
4499 tap->wt_flags |= IEEE80211_RADIOTAP_F_WEP;
4501 ieee80211_radiotap_tx(vap, m);
4504 /* Prepare TX firmware command. */
4505 cmd = &ring->cmd[ring->cur];
4506 cmd->code = IWN_CMD_TX_DATA;
4508 cmd->qid = ring->qid;
4509 cmd->idx = ring->cur;
4511 tx = (struct iwn_cmd_data *)cmd->data;
4512 /* NB: No need to clear tx, all fields are reinitialized here. */
4513 tx->scratch = 0; /* clear "scratch" area */
4516 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
4517 /* Unicast frame, check if an ACK is expected. */
4518 if (!qos || (qos & IEEE80211_QOS_ACKPOLICY) !=
4519 IEEE80211_QOS_ACKPOLICY_NOACK)
4520 flags |= IWN_TX_NEED_ACK;
4523 (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) ==
4524 (IEEE80211_FC0_TYPE_CTL | IEEE80211_FC0_SUBTYPE_BAR))
4525 flags |= IWN_TX_IMM_BA; /* Cannot happen yet. */
4527 if (wh->i_fc[1] & IEEE80211_FC1_MORE_FRAG)
4528 flags |= IWN_TX_MORE_FRAG; /* Cannot happen yet. */
4530 /* Check if frame must be protected using RTS/CTS or CTS-to-self. */
4531 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
4532 /* NB: Group frames are sent using CCK in 802.11b/g. */
4533 if (totlen + IEEE80211_CRC_LEN > vap->iv_rtsthreshold) {
4534 flags |= IWN_TX_NEED_RTS;
4535 } else if (iwn_check_rate_needs_protection(sc, vap, rate)) {
4536 if (ic->ic_protmode == IEEE80211_PROT_CTSONLY)
4537 flags |= IWN_TX_NEED_CTS;
4538 else if (ic->ic_protmode == IEEE80211_PROT_RTSCTS)
4539 flags |= IWN_TX_NEED_RTS;
4540 } else if ((rate & IEEE80211_RATE_MCS) &&
4541 (ic->ic_htprotmode == IEEE80211_PROT_RTSCTS)) {
4542 flags |= IWN_TX_NEED_RTS;
4545 /* XXX HT protection? */
4547 if (flags & (IWN_TX_NEED_RTS | IWN_TX_NEED_CTS)) {
4548 if (sc->hw_type != IWN_HW_REV_TYPE_4965) {
4549 /* 5000 autoselects RTS/CTS or CTS-to-self. */
4550 flags &= ~(IWN_TX_NEED_RTS | IWN_TX_NEED_CTS);
4551 flags |= IWN_TX_NEED_PROTECTION;
4553 flags |= IWN_TX_FULL_TXOP;
4557 if (IEEE80211_IS_MULTICAST(wh->i_addr1) ||
4558 type != IEEE80211_FC0_TYPE_DATA)
4559 tx->id = sc->broadcast_id;
4563 if (type == IEEE80211_FC0_TYPE_MGT) {
4564 uint8_t subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK;
4566 /* Tell HW to set timestamp in probe responses. */
4567 if (subtype == IEEE80211_FC0_SUBTYPE_PROBE_RESP)
4568 flags |= IWN_TX_INSERT_TSTAMP;
4569 if (subtype == IEEE80211_FC0_SUBTYPE_ASSOC_REQ ||
4570 subtype == IEEE80211_FC0_SUBTYPE_REASSOC_REQ)
4571 tx->timeout = htole16(3);
4573 tx->timeout = htole16(2);
4575 tx->timeout = htole16(0);
4578 /* First segment length must be a multiple of 4. */
4579 flags |= IWN_TX_NEED_PADDING;
4580 pad = 4 - (hdrlen & 3);
4584 tx->len = htole16(totlen);
4586 tx->rts_ntries = 60;
4587 tx->data_ntries = 15;
4588 tx->lifetime = htole32(IWN_LIFETIME_INFINITE);
4589 tx->rate = iwn_rate_to_plcp(sc, ni, rate);
4590 if (tx->id == sc->broadcast_id) {
4591 /* Group or management frame. */
4594 tx->linkq = iwn_tx_rate_to_linkq_offset(sc, ni, rate);
4595 flags |= IWN_TX_LINKQ; /* enable MRR */
4598 /* Set physical address of "scratch area". */
4599 tx->loaddr = htole32(IWN_LOADDR(data->scratch_paddr));
4600 tx->hiaddr = IWN_HIADDR(data->scratch_paddr);
4602 /* Copy 802.11 header in TX command. */
4603 memcpy((uint8_t *)(tx + 1), wh, hdrlen);
4605 /* Trim 802.11 header. */
4608 tx->flags = htole32(flags);
4610 error = bus_dmamap_load_mbuf_sg(ring->data_dmat, data->map, m, segs,
4611 &nsegs, BUS_DMA_NOWAIT);
4613 if (error != EFBIG) {
4614 device_printf(sc->sc_dev,
4615 "%s: can't map mbuf (error %d)\n", __func__, error);
4618 /* Too many DMA segments, linearize mbuf. */
4619 m1 = m_collapse(m, M_NOWAIT, IWN_MAX_SCATTER - 1);
4621 device_printf(sc->sc_dev,
4622 "%s: could not defrag mbuf\n", __func__);
4627 error = bus_dmamap_load_mbuf_sg(ring->data_dmat, data->map, m,
4628 segs, &nsegs, BUS_DMA_NOWAIT);
4630 device_printf(sc->sc_dev,
4631 "%s: can't map mbuf (error %d)\n", __func__, error);
4639 DPRINTF(sc, IWN_DEBUG_XMIT,
4640 "%s: qid %d idx %d len %d nsegs %d flags 0x%08x rate 0x%04x plcp 0x%08x\n",
4650 /* Fill TX descriptor. */
4653 desc->nsegs += nsegs;
4654 /* First DMA segment is used by the TX command. */
4655 desc->segs[0].addr = htole32(IWN_LOADDR(data->cmd_paddr));
4656 desc->segs[0].len = htole16(IWN_HIADDR(data->cmd_paddr) |
4657 (4 + sizeof (*tx) + hdrlen + pad) << 4);
4658 /* Other DMA segments are for data payload. */
4660 for (i = 1; i <= nsegs; i++) {
4661 desc->segs[i].addr = htole32(IWN_LOADDR(seg->ds_addr));
4662 desc->segs[i].len = htole16(IWN_HIADDR(seg->ds_addr) |
4667 bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_PREWRITE);
4668 bus_dmamap_sync(ring->cmd_dma.tag, ring->cmd_dma.map,
4669 BUS_DMASYNC_PREWRITE);
4670 bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map,
4671 BUS_DMASYNC_PREWRITE);
4673 /* Update TX scheduler. */
4674 if (ring->qid >= sc->firstaggqueue)
4675 ops->update_sched(sc, ring->qid, ring->cur, tx->id, totlen);
4678 ring->cur = (ring->cur + 1) % IWN_TX_RING_COUNT;
4679 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, ring->qid << 8 | ring->cur);
4681 /* Mark TX ring as full if we reach a certain threshold. */
4682 if (++ring->queued > IWN_TX_RING_HIMARK)
4683 sc->qfullmsk |= 1 << ring->qid;
4685 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__);
4691 iwn_tx_data_raw(struct iwn_softc *sc, struct mbuf *m,
4692 struct ieee80211_node *ni, const struct ieee80211_bpf_params *params)
4694 struct iwn_ops *ops = &sc->ops;
4695 struct ieee80211vap *vap = ni->ni_vap;
4696 struct iwn_tx_cmd *cmd;
4697 struct iwn_cmd_data *tx;
4698 struct ieee80211_frame *wh;
4699 struct iwn_tx_ring *ring;
4700 struct iwn_tx_desc *desc;
4701 struct iwn_tx_data *data;
4703 bus_dma_segment_t *seg, segs[IWN_MAX_SCATTER];
4706 int ac, totlen, error, pad, nsegs = 0, i, rate;
4709 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
4711 IWN_LOCK_ASSERT(sc);
4713 wh = mtod(m, struct ieee80211_frame *);
4714 hdrlen = ieee80211_anyhdrsize(wh);
4715 type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK;
4717 ac = params->ibp_pri & 3;
4719 ring = &sc->txq[ac];
4720 desc = &ring->desc[ring->cur];
4721 data = &ring->data[ring->cur];
4723 /* Choose a TX rate. */
4724 rate = params->ibp_rate0;
4725 totlen = m->m_pkthdr.len;
4727 /* Prepare TX firmware command. */
4728 cmd = &ring->cmd[ring->cur];
4729 cmd->code = IWN_CMD_TX_DATA;
4731 cmd->qid = ring->qid;
4732 cmd->idx = ring->cur;
4734 tx = (struct iwn_cmd_data *)cmd->data;
4735 /* NB: No need to clear tx, all fields are reinitialized here. */
4736 tx->scratch = 0; /* clear "scratch" area */
4739 if ((params->ibp_flags & IEEE80211_BPF_NOACK) == 0)
4740 flags |= IWN_TX_NEED_ACK;
4741 if (params->ibp_flags & IEEE80211_BPF_RTS) {
4742 if (sc->hw_type != IWN_HW_REV_TYPE_4965) {
4743 /* 5000 autoselects RTS/CTS or CTS-to-self. */
4744 flags &= ~IWN_TX_NEED_RTS;
4745 flags |= IWN_TX_NEED_PROTECTION;
4747 flags |= IWN_TX_NEED_RTS | IWN_TX_FULL_TXOP;
4749 if (params->ibp_flags & IEEE80211_BPF_CTS) {
4750 if (sc->hw_type != IWN_HW_REV_TYPE_4965) {
4751 /* 5000 autoselects RTS/CTS or CTS-to-self. */
4752 flags &= ~IWN_TX_NEED_CTS;
4753 flags |= IWN_TX_NEED_PROTECTION;
4755 flags |= IWN_TX_NEED_CTS | IWN_TX_FULL_TXOP;
4757 if (type == IEEE80211_FC0_TYPE_MGT) {
4758 uint8_t subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK;
4760 /* Tell HW to set timestamp in probe responses. */
4761 if (subtype == IEEE80211_FC0_SUBTYPE_PROBE_RESP)
4762 flags |= IWN_TX_INSERT_TSTAMP;
4764 if (subtype == IEEE80211_FC0_SUBTYPE_ASSOC_REQ ||
4765 subtype == IEEE80211_FC0_SUBTYPE_REASSOC_REQ)
4766 tx->timeout = htole16(3);
4768 tx->timeout = htole16(2);
4770 tx->timeout = htole16(0);
4773 /* First segment length must be a multiple of 4. */
4774 flags |= IWN_TX_NEED_PADDING;
4775 pad = 4 - (hdrlen & 3);
4779 if (ieee80211_radiotap_active_vap(vap)) {
4780 struct iwn_tx_radiotap_header *tap = &sc->sc_txtap;
4783 tap->wt_rate = rate;
4785 ieee80211_radiotap_tx(vap, m);
4788 tx->len = htole16(totlen);
4790 tx->id = sc->broadcast_id;
4791 tx->rts_ntries = params->ibp_try1;
4792 tx->data_ntries = params->ibp_try0;
4793 tx->lifetime = htole32(IWN_LIFETIME_INFINITE);
4794 tx->rate = iwn_rate_to_plcp(sc, ni, rate);
4796 /* Group or management frame. */
4799 /* Set physical address of "scratch area". */
4800 tx->loaddr = htole32(IWN_LOADDR(data->scratch_paddr));
4801 tx->hiaddr = IWN_HIADDR(data->scratch_paddr);
4803 /* Copy 802.11 header in TX command. */
4804 memcpy((uint8_t *)(tx + 1), wh, hdrlen);
4806 /* Trim 802.11 header. */
4809 tx->flags = htole32(flags);
4811 error = bus_dmamap_load_mbuf_sg(ring->data_dmat, data->map, m, segs,
4812 &nsegs, BUS_DMA_NOWAIT);
4814 if (error != EFBIG) {
4815 device_printf(sc->sc_dev,
4816 "%s: can't map mbuf (error %d)\n", __func__, error);
4819 /* Too many DMA segments, linearize mbuf. */
4820 m1 = m_collapse(m, M_NOWAIT, IWN_MAX_SCATTER - 1);
4822 device_printf(sc->sc_dev,
4823 "%s: could not defrag mbuf\n", __func__);
4828 error = bus_dmamap_load_mbuf_sg(ring->data_dmat, data->map, m,
4829 segs, &nsegs, BUS_DMA_NOWAIT);
4831 device_printf(sc->sc_dev,
4832 "%s: can't map mbuf (error %d)\n", __func__, error);
4840 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: qid %d idx %d len %d nsegs %d\n",
4841 __func__, ring->qid, ring->cur, m->m_pkthdr.len, nsegs);
4843 /* Fill TX descriptor. */
4846 desc->nsegs += nsegs;
4847 /* First DMA segment is used by the TX command. */
4848 desc->segs[0].addr = htole32(IWN_LOADDR(data->cmd_paddr));
4849 desc->segs[0].len = htole16(IWN_HIADDR(data->cmd_paddr) |
4850 (4 + sizeof (*tx) + hdrlen + pad) << 4);
4851 /* Other DMA segments are for data payload. */
4853 for (i = 1; i <= nsegs; i++) {
4854 desc->segs[i].addr = htole32(IWN_LOADDR(seg->ds_addr));
4855 desc->segs[i].len = htole16(IWN_HIADDR(seg->ds_addr) |
4860 bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_PREWRITE);
4861 bus_dmamap_sync(ring->cmd_dma.tag, ring->cmd_dma.map,
4862 BUS_DMASYNC_PREWRITE);
4863 bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map,
4864 BUS_DMASYNC_PREWRITE);
4866 /* Update TX scheduler. */
4867 if (ring->qid >= sc->firstaggqueue)
4868 ops->update_sched(sc, ring->qid, ring->cur, tx->id, totlen);
4871 ring->cur = (ring->cur + 1) % IWN_TX_RING_COUNT;
4872 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, ring->qid << 8 | ring->cur);
4874 /* Mark TX ring as full if we reach a certain threshold. */
4875 if (++ring->queued > IWN_TX_RING_HIMARK)
4876 sc->qfullmsk |= 1 << ring->qid;
4878 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__);
4884 iwn_xmit_task(void *arg0, int pending)
4886 struct iwn_softc *sc = arg0;
4887 struct ieee80211_node *ni;
4890 struct ieee80211_bpf_params p;
4893 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: called\n", __func__);
4897 * Dequeue frames, attempt to transmit,
4898 * then disable beaconwait when we're done.
4900 while ((m = mbufq_dequeue(&sc->sc_xmit_queue)) != NULL) {
4902 ni = (struct ieee80211_node *)m->m_pkthdr.rcvif;
4904 /* Get xmit params if appropriate */
4905 if (ieee80211_get_xmit_params(m, &p) == 0)
4908 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: m=%p, have_p=%d\n",
4909 __func__, m, have_p);
4911 /* If we have xmit params, use them */
4913 error = iwn_tx_data_raw(sc, m, ni, &p);
4915 error = iwn_tx_data(sc, m, ni);
4918 if_inc_counter(ni->ni_vap->iv_ifp,
4919 IFCOUNTER_OERRORS, 1);
4920 ieee80211_free_node(ni);
4925 sc->sc_beacon_wait = 0;
4930 * raw frame xmit - free node/reference if failed.
4933 iwn_raw_xmit(struct ieee80211_node *ni, struct mbuf *m,
4934 const struct ieee80211_bpf_params *params)
4936 struct ieee80211com *ic = ni->ni_ic;
4937 struct iwn_softc *sc = ic->ic_softc;
4940 DPRINTF(sc, IWN_DEBUG_XMIT | IWN_DEBUG_TRACE, "->%s begin\n", __func__);
4943 if ((sc->sc_flags & IWN_FLAG_RUNNING) == 0) {
4949 /* queue frame if we have to */
4950 if (sc->sc_beacon_wait) {
4951 if (iwn_xmit_queue_enqueue(sc, m) != 0) {
4956 /* Queued, so just return OK */
4961 if (params == NULL) {
4963 * Legacy path; interpret frame contents to decide
4964 * precisely how to send the frame.
4966 error = iwn_tx_data(sc, m, ni);
4969 * Caller supplied explicit parameters to use in
4970 * sending the frame.
4972 error = iwn_tx_data_raw(sc, m, ni, params);
4975 sc->sc_tx_timer = 5;
4981 DPRINTF(sc, IWN_DEBUG_TRACE | IWN_DEBUG_XMIT, "->%s: end\n",__func__);
4987 * transmit - don't free mbuf if failed; don't free node ref if failed.
4990 iwn_transmit(struct ieee80211com *ic, struct mbuf *m)
4992 struct iwn_softc *sc = ic->ic_softc;
4993 struct ieee80211_node *ni;
4996 ni = (struct ieee80211_node *)m->m_pkthdr.rcvif;
4999 if ((sc->sc_flags & IWN_FLAG_RUNNING) == 0 || sc->sc_beacon_wait) {
5009 error = iwn_tx_data(sc, m, ni);
5011 sc->sc_tx_timer = 5;
5017 iwn_scan_timeout(void *arg)
5019 struct iwn_softc *sc = arg;
5020 struct ieee80211com *ic = &sc->sc_ic;
5022 ic_printf(ic, "scan timeout\n");
5023 ieee80211_restart_all(ic);
5027 iwn_watchdog(void *arg)
5029 struct iwn_softc *sc = arg;
5030 struct ieee80211com *ic = &sc->sc_ic;
5032 IWN_LOCK_ASSERT(sc);
5034 KASSERT(sc->sc_flags & IWN_FLAG_RUNNING, ("not running"));
5036 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
5038 if (sc->sc_tx_timer > 0) {
5039 if (--sc->sc_tx_timer == 0) {
5040 ic_printf(ic, "device timeout\n");
5041 ieee80211_restart_all(ic);
5045 callout_reset(&sc->watchdog_to, hz, iwn_watchdog, sc);
5049 iwn_cdev_open(struct cdev *dev, int flags, int type, struct thread *td)
5056 iwn_cdev_close(struct cdev *dev, int flags, int type, struct thread *td)
5063 iwn_cdev_ioctl(struct cdev *dev, unsigned long cmd, caddr_t data, int fflag,
5067 struct iwn_softc *sc = dev->si_drv1;
5068 struct iwn_ioctl_data *d;
5070 rc = priv_check(td, PRIV_DRIVER);
5076 d = (struct iwn_ioctl_data *) data;
5078 /* XXX validate permissions/memory/etc? */
5079 rc = copyout(&sc->last_stat, d->dst_addr, sizeof(struct iwn_stats));
5084 memset(&sc->last_stat, 0, sizeof(struct iwn_stats));
5095 iwn_ioctl(struct ieee80211com *ic, u_long cmd, void *data)
5102 iwn_parent(struct ieee80211com *ic)
5104 struct iwn_softc *sc = ic->ic_softc;
5105 struct ieee80211vap *vap;
5108 if (ic->ic_nrunning > 0) {
5109 error = iwn_init(sc);
5113 ieee80211_start_all(ic);
5116 /* radio is disabled via RFkill switch */
5117 taskqueue_enqueue(sc->sc_tq, &sc->sc_rftoggle_task);
5120 vap = TAILQ_FIRST(&ic->ic_vaps);
5122 ieee80211_stop(vap);
5130 * Send a command to the firmware.
5133 iwn_cmd(struct iwn_softc *sc, int code, const void *buf, int size, int async)
5135 struct iwn_tx_ring *ring;
5136 struct iwn_tx_desc *desc;
5137 struct iwn_tx_data *data;
5138 struct iwn_tx_cmd *cmd;
5144 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
5147 IWN_LOCK_ASSERT(sc);
5149 if (sc->sc_flags & IWN_FLAG_PAN_SUPPORT)
5150 cmd_queue_num = IWN_PAN_CMD_QUEUE;
5152 cmd_queue_num = IWN_CMD_QUEUE_NUM;
5154 ring = &sc->txq[cmd_queue_num];
5155 desc = &ring->desc[ring->cur];
5156 data = &ring->data[ring->cur];
5159 if (size > sizeof cmd->data) {
5160 /* Command is too large to fit in a descriptor. */
5161 if (totlen > MCLBYTES)
5163 m = m_getjcl(M_NOWAIT, MT_DATA, M_PKTHDR, MJUMPAGESIZE);
5166 cmd = mtod(m, struct iwn_tx_cmd *);
5167 error = bus_dmamap_load(ring->data_dmat, data->map, cmd,
5168 totlen, iwn_dma_map_addr, &paddr, BUS_DMA_NOWAIT);
5175 cmd = &ring->cmd[ring->cur];
5176 paddr = data->cmd_paddr;
5181 cmd->qid = ring->qid;
5182 cmd->idx = ring->cur;
5183 memcpy(cmd->data, buf, size);
5186 desc->segs[0].addr = htole32(IWN_LOADDR(paddr));
5187 desc->segs[0].len = htole16(IWN_HIADDR(paddr) | totlen << 4);
5189 DPRINTF(sc, IWN_DEBUG_CMD, "%s: %s (0x%x) flags %d qid %d idx %d\n",
5190 __func__, iwn_intr_str(cmd->code), cmd->code,
5191 cmd->flags, cmd->qid, cmd->idx);
5193 if (size > sizeof cmd->data) {
5194 bus_dmamap_sync(ring->data_dmat, data->map,
5195 BUS_DMASYNC_PREWRITE);
5197 bus_dmamap_sync(ring->cmd_dma.tag, ring->cmd_dma.map,
5198 BUS_DMASYNC_PREWRITE);
5200 bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map,
5201 BUS_DMASYNC_PREWRITE);
5203 /* Kick command ring. */
5204 ring->cur = (ring->cur + 1) % IWN_TX_RING_COUNT;
5205 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, ring->qid << 8 | ring->cur);
5207 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__);
5209 return async ? 0 : msleep(desc, &sc->sc_mtx, PCATCH, "iwncmd", hz);
5213 iwn4965_add_node(struct iwn_softc *sc, struct iwn_node_info *node, int async)
5215 struct iwn4965_node_info hnode;
5218 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
5221 * We use the node structure for 5000 Series internally (it is
5222 * a superset of the one for 4965AGN). We thus copy the common
5223 * fields before sending the command.
5225 src = (caddr_t)node;
5226 dst = (caddr_t)&hnode;
5227 memcpy(dst, src, 48);
5228 /* Skip TSC, RX MIC and TX MIC fields from ``src''. */
5229 memcpy(dst + 48, src + 72, 20);
5230 return iwn_cmd(sc, IWN_CMD_ADD_NODE, &hnode, sizeof hnode, async);
5234 iwn5000_add_node(struct iwn_softc *sc, struct iwn_node_info *node, int async)
5237 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
5239 /* Direct mapping. */
5240 return iwn_cmd(sc, IWN_CMD_ADD_NODE, node, sizeof (*node), async);
5244 iwn_set_link_quality(struct iwn_softc *sc, struct ieee80211_node *ni)
5246 struct iwn_node *wn = (void *)ni;
5247 struct ieee80211_rateset *rs;
5248 struct iwn_cmd_link_quality linkq;
5249 int i, rate, txrate;
5252 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
5254 memset(&linkq, 0, sizeof linkq);
5256 linkq.antmsk_1stream = iwn_get_1stream_tx_antmask(sc);
5257 linkq.antmsk_2stream = iwn_get_2stream_tx_antmask(sc);
5259 linkq.ampdu_max = 32; /* XXX negotiated? */
5260 linkq.ampdu_threshold = 3;
5261 linkq.ampdu_limit = htole16(4000); /* 4ms */
5263 DPRINTF(sc, IWN_DEBUG_XMIT,
5264 "%s: 1stream antenna=0x%02x, 2stream antenna=0x%02x, ntxstreams=%d\n",
5266 linkq.antmsk_1stream,
5267 linkq.antmsk_2stream,
5271 * Are we using 11n rates? Ensure the channel is
5272 * 11n _and_ we have some 11n rates, or don't
5275 if (IEEE80211_IS_CHAN_HT(ni->ni_chan) && ni->ni_htrates.rs_nrates > 0) {
5276 rs = (struct ieee80211_rateset *) &ni->ni_htrates;
5283 /* Start at highest available bit-rate. */
5285 * XXX this is all very dirty!
5288 txrate = ni->ni_htrates.rs_nrates - 1;
5290 txrate = rs->rs_nrates - 1;
5291 for (i = 0; i < IWN_MAX_TX_RETRIES; i++) {
5295 * XXX TODO: ensure the last two slots are the two lowest
5296 * rate entries, just for now.
5298 if (i == 14 || i == 15)
5302 rate = IEEE80211_RATE_MCS | rs->rs_rates[txrate];
5304 rate = IEEE80211_RV(rs->rs_rates[txrate]);
5306 /* Do rate -> PLCP config mapping */
5307 plcp = iwn_rate_to_plcp(sc, ni, rate);
5308 linkq.retry[i] = plcp;
5309 DPRINTF(sc, IWN_DEBUG_XMIT,
5310 "%s: i=%d, txrate=%d, rate=0x%02x, plcp=0x%08x\n",
5318 * The mimo field is an index into the table which
5319 * indicates the first index where it and subsequent entries
5320 * will not be using MIMO.
5322 * Since we're filling linkq from 0..15 and we're filling
5323 * from the highest MCS rates to the lowest rates, if we
5324 * _are_ doing a dual-stream rate, set mimo to idx+1 (ie,
5325 * the next entry.) That way if the next entry is a non-MIMO
5326 * entry, we're already pointing at it.
5328 if ((le32toh(plcp) & IWN_RFLAG_MCS) &&
5329 IEEE80211_RV(le32toh(plcp)) > 7)
5332 /* Next retry at immediate lower bit-rate. */
5337 * If we reached the end of the list and indeed we hit
5338 * all MIMO rates (eg 5300 doing MCS23-15) then yes,
5339 * set mimo to 15. Setting it to 16 panics the firmware.
5341 if (linkq.mimo > 15)
5344 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: mimo = %d\n", __func__, linkq.mimo);
5346 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__);
5348 return iwn_cmd(sc, IWN_CMD_LINK_QUALITY, &linkq, sizeof linkq, 1);
5352 * Broadcast node is used to send group-addressed and management frames.
5355 iwn_add_broadcast_node(struct iwn_softc *sc, int async)
5357 struct iwn_ops *ops = &sc->ops;
5358 struct ieee80211com *ic = &sc->sc_ic;
5359 struct iwn_node_info node;
5360 struct iwn_cmd_link_quality linkq;
5364 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
5366 sc->rxon = &sc->rx_on[IWN_RXON_BSS_CTX];
5368 memset(&node, 0, sizeof node);
5369 IEEE80211_ADDR_COPY(node.macaddr, ieee80211broadcastaddr);
5370 node.id = sc->broadcast_id;
5371 DPRINTF(sc, IWN_DEBUG_RESET, "%s: adding broadcast node\n", __func__);
5372 if ((error = ops->add_node(sc, &node, async)) != 0)
5375 /* Use the first valid TX antenna. */
5376 txant = IWN_LSB(sc->txchainmask);
5378 memset(&linkq, 0, sizeof linkq);
5379 linkq.id = sc->broadcast_id;
5380 linkq.antmsk_1stream = iwn_get_1stream_tx_antmask(sc);
5381 linkq.antmsk_2stream = iwn_get_2stream_tx_antmask(sc);
5382 linkq.ampdu_max = 64;
5383 linkq.ampdu_threshold = 3;
5384 linkq.ampdu_limit = htole16(4000); /* 4ms */
5386 /* Use lowest mandatory bit-rate. */
5387 /* XXX rate table lookup? */
5388 if (IEEE80211_IS_CHAN_5GHZ(ic->ic_curchan))
5389 linkq.retry[0] = htole32(0xd);
5391 linkq.retry[0] = htole32(10 | IWN_RFLAG_CCK);
5392 linkq.retry[0] |= htole32(IWN_RFLAG_ANT(txant));
5393 /* Use same bit-rate for all TX retries. */
5394 for (i = 1; i < IWN_MAX_TX_RETRIES; i++) {
5395 linkq.retry[i] = linkq.retry[0];
5398 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__);
5400 return iwn_cmd(sc, IWN_CMD_LINK_QUALITY, &linkq, sizeof linkq, async);
5404 iwn_updateedca(struct ieee80211com *ic)
5406 #define IWN_EXP2(x) ((1 << (x)) - 1) /* CWmin = 2^ECWmin - 1 */
5407 struct iwn_softc *sc = ic->ic_softc;
5408 struct iwn_edca_params cmd;
5411 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
5413 memset(&cmd, 0, sizeof cmd);
5414 cmd.flags = htole32(IWN_EDCA_UPDATE);
5417 for (aci = 0; aci < WME_NUM_AC; aci++) {
5418 const struct wmeParams *ac =
5419 &ic->ic_wme.wme_chanParams.cap_wmeParams[aci];
5420 cmd.ac[aci].aifsn = ac->wmep_aifsn;
5421 cmd.ac[aci].cwmin = htole16(IWN_EXP2(ac->wmep_logcwmin));
5422 cmd.ac[aci].cwmax = htole16(IWN_EXP2(ac->wmep_logcwmax));
5423 cmd.ac[aci].txoplimit =
5424 htole16(IEEE80211_TXOP_TO_US(ac->wmep_txopLimit));
5426 IEEE80211_UNLOCK(ic);
5429 (void)iwn_cmd(sc, IWN_CMD_EDCA_PARAMS, &cmd, sizeof cmd, 1);
5432 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__);
5439 iwn_set_promisc(struct iwn_softc *sc)
5441 struct ieee80211com *ic = &sc->sc_ic;
5442 uint32_t promisc_filter;
5444 promisc_filter = IWN_FILTER_CTL | IWN_FILTER_PROMISC;
5445 if (ic->ic_promisc > 0 || ic->ic_opmode == IEEE80211_M_MONITOR)
5446 sc->rxon->filter |= htole32(promisc_filter);
5448 sc->rxon->filter &= ~htole32(promisc_filter);
5452 iwn_update_promisc(struct ieee80211com *ic)
5454 struct iwn_softc *sc = ic->ic_softc;
5457 if (ic->ic_opmode == IEEE80211_M_MONITOR)
5458 return; /* nothing to do */
5461 if (!(sc->sc_flags & IWN_FLAG_RUNNING)) {
5466 iwn_set_promisc(sc);
5467 if ((error = iwn_send_rxon(sc, 1, 1)) != 0) {
5468 device_printf(sc->sc_dev,
5469 "%s: could not send RXON, error %d\n",
5476 iwn_update_mcast(struct ieee80211com *ic)
5482 iwn_set_led(struct iwn_softc *sc, uint8_t which, uint8_t off, uint8_t on)
5484 struct iwn_cmd_led led;
5486 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
5489 /* XXX don't set LEDs during scan? */
5490 if (sc->sc_is_scanning)
5494 /* Clear microcode LED ownership. */
5495 IWN_CLRBITS(sc, IWN_LED, IWN_LED_BSM_CTRL);
5498 led.unit = htole32(10000); /* on/off in unit of 100ms */
5501 (void)iwn_cmd(sc, IWN_CMD_SET_LED, &led, sizeof led, 1);
5505 * Set the critical temperature at which the firmware will stop the radio
5509 iwn_set_critical_temp(struct iwn_softc *sc)
5511 struct iwn_critical_temp crit;
5514 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
5516 IWN_WRITE(sc, IWN_UCODE_GP1_CLR, IWN_UCODE_GP1_CTEMP_STOP_RF);
5518 if (sc->hw_type == IWN_HW_REV_TYPE_5150)
5519 temp = (IWN_CTOK(110) - sc->temp_off) * -5;
5520 else if (sc->hw_type == IWN_HW_REV_TYPE_4965)
5521 temp = IWN_CTOK(110);
5524 memset(&crit, 0, sizeof crit);
5525 crit.tempR = htole32(temp);
5526 DPRINTF(sc, IWN_DEBUG_RESET, "setting critical temp to %d\n", temp);
5527 return iwn_cmd(sc, IWN_CMD_SET_CRITICAL_TEMP, &crit, sizeof crit, 0);
5531 iwn_set_timing(struct iwn_softc *sc, struct ieee80211_node *ni)
5533 struct iwn_cmd_timing cmd;
5536 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
5538 memset(&cmd, 0, sizeof cmd);
5539 memcpy(&cmd.tstamp, ni->ni_tstamp.data, sizeof (uint64_t));
5540 cmd.bintval = htole16(ni->ni_intval);
5541 cmd.lintval = htole16(10);
5543 /* Compute remaining time until next beacon. */
5544 val = (uint64_t)ni->ni_intval * IEEE80211_DUR_TU;
5545 mod = le64toh(cmd.tstamp) % val;
5546 cmd.binitval = htole32((uint32_t)(val - mod));
5548 DPRINTF(sc, IWN_DEBUG_RESET, "timing bintval=%u tstamp=%ju, init=%u\n",
5549 ni->ni_intval, le64toh(cmd.tstamp), (uint32_t)(val - mod));
5551 return iwn_cmd(sc, IWN_CMD_TIMING, &cmd, sizeof cmd, 1);
5555 iwn4965_power_calibration(struct iwn_softc *sc, int temp)
5558 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
5560 /* Adjust TX power if need be (delta >= 3 degC). */
5561 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "%s: temperature %d->%d\n",
5562 __func__, sc->temp, temp);
5563 if (abs(temp - sc->temp) >= 3) {
5564 /* Record temperature of last calibration. */
5566 (void)iwn4965_set_txpower(sc, 1);
5571 * Set TX power for current channel (each rate has its own power settings).
5572 * This function takes into account the regulatory information from EEPROM,
5573 * the current temperature and the current voltage.
5576 iwn4965_set_txpower(struct iwn_softc *sc, int async)
5578 /* Fixed-point arithmetic division using a n-bit fractional part. */
5579 #define fdivround(a, b, n) \
5580 ((((1 << n) * (a)) / (b) + (1 << n) / 2) / (1 << n))
5581 /* Linear interpolation. */
5582 #define interpolate(x, x1, y1, x2, y2, n) \
5583 ((y1) + fdivround(((int)(x) - (x1)) * ((y2) - (y1)), (x2) - (x1), n))
5585 static const int tdiv[IWN_NATTEN_GROUPS] = { 9, 8, 8, 8, 6 };
5586 struct iwn_ucode_info *uc = &sc->ucode_info;
5587 struct iwn4965_cmd_txpower cmd;
5588 struct iwn4965_eeprom_chan_samples *chans;
5589 const uint8_t *rf_gain, *dsp_gain;
5590 int32_t vdiff, tdiff;
5591 int i, is_chan_5ghz, c, grp, maxpwr;
5594 sc->rxon = &sc->rx_on[IWN_RXON_BSS_CTX];
5595 /* Retrieve current channel from last RXON. */
5596 chan = sc->rxon->chan;
5597 is_chan_5ghz = (sc->rxon->flags & htole32(IWN_RXON_24GHZ)) == 0;
5598 DPRINTF(sc, IWN_DEBUG_RESET, "setting TX power for channel %d\n",
5601 memset(&cmd, 0, sizeof cmd);
5602 cmd.band = is_chan_5ghz ? 0 : 1;
5606 maxpwr = sc->maxpwr5GHz;
5607 rf_gain = iwn4965_rf_gain_5ghz;
5608 dsp_gain = iwn4965_dsp_gain_5ghz;
5610 maxpwr = sc->maxpwr2GHz;
5611 rf_gain = iwn4965_rf_gain_2ghz;
5612 dsp_gain = iwn4965_dsp_gain_2ghz;
5615 /* Compute voltage compensation. */
5616 vdiff = ((int32_t)le32toh(uc->volt) - sc->eeprom_voltage) / 7;
5621 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_TXPOW,
5622 "%s: voltage compensation=%d (UCODE=%d, EEPROM=%d)\n",
5623 __func__, vdiff, le32toh(uc->volt), sc->eeprom_voltage);
5625 /* Get channel attenuation group. */
5626 if (chan <= 20) /* 1-20 */
5628 else if (chan <= 43) /* 34-43 */
5630 else if (chan <= 70) /* 44-70 */
5632 else if (chan <= 124) /* 71-124 */
5636 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_TXPOW,
5637 "%s: chan %d, attenuation group=%d\n", __func__, chan, grp);
5639 /* Get channel sub-band. */
5640 for (i = 0; i < IWN_NBANDS; i++)
5641 if (sc->bands[i].lo != 0 &&
5642 sc->bands[i].lo <= chan && chan <= sc->bands[i].hi)
5644 if (i == IWN_NBANDS) /* Can't happen in real-life. */
5646 chans = sc->bands[i].chans;
5647 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_TXPOW,
5648 "%s: chan %d sub-band=%d\n", __func__, chan, i);
5650 for (c = 0; c < 2; c++) {
5651 uint8_t power, gain, temp;
5652 int maxchpwr, pwr, ridx, idx;
5654 power = interpolate(chan,
5655 chans[0].num, chans[0].samples[c][1].power,
5656 chans[1].num, chans[1].samples[c][1].power, 1);
5657 gain = interpolate(chan,
5658 chans[0].num, chans[0].samples[c][1].gain,
5659 chans[1].num, chans[1].samples[c][1].gain, 1);
5660 temp = interpolate(chan,
5661 chans[0].num, chans[0].samples[c][1].temp,
5662 chans[1].num, chans[1].samples[c][1].temp, 1);
5663 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_TXPOW,
5664 "%s: Tx chain %d: power=%d gain=%d temp=%d\n",
5665 __func__, c, power, gain, temp);
5667 /* Compute temperature compensation. */
5668 tdiff = ((sc->temp - temp) * 2) / tdiv[grp];
5669 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_TXPOW,
5670 "%s: temperature compensation=%d (current=%d, EEPROM=%d)\n",
5671 __func__, tdiff, sc->temp, temp);
5673 for (ridx = 0; ridx <= IWN_RIDX_MAX; ridx++) {
5674 /* Convert dBm to half-dBm. */
5675 maxchpwr = sc->maxpwr[chan] * 2;
5677 maxchpwr -= 6; /* MIMO 2T: -3dB */
5681 /* Adjust TX power based on rate. */
5682 if ((ridx % 8) == 5)
5683 pwr -= 15; /* OFDM48: -7.5dB */
5684 else if ((ridx % 8) == 6)
5685 pwr -= 17; /* OFDM54: -8.5dB */
5686 else if ((ridx % 8) == 7)
5687 pwr -= 20; /* OFDM60: -10dB */
5689 pwr -= 10; /* Others: -5dB */
5691 /* Do not exceed channel max TX power. */
5695 idx = gain - (pwr - power) - tdiff - vdiff;
5696 if ((ridx / 8) & 1) /* MIMO */
5697 idx += (int32_t)le32toh(uc->atten[grp][c]);
5700 idx += 9; /* 5GHz */
5701 if (ridx == IWN_RIDX_MAX)
5704 /* Make sure idx stays in a valid range. */
5707 else if (idx > IWN4965_MAX_PWR_INDEX)
5708 idx = IWN4965_MAX_PWR_INDEX;
5710 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_TXPOW,
5711 "%s: Tx chain %d, rate idx %d: power=%d\n",
5712 __func__, c, ridx, idx);
5713 cmd.power[ridx].rf_gain[c] = rf_gain[idx];
5714 cmd.power[ridx].dsp_gain[c] = dsp_gain[idx];
5718 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_TXPOW,
5719 "%s: set tx power for chan %d\n", __func__, chan);
5720 return iwn_cmd(sc, IWN_CMD_TXPOWER, &cmd, sizeof cmd, async);
5727 iwn5000_set_txpower(struct iwn_softc *sc, int async)
5729 struct iwn5000_cmd_txpower cmd;
5732 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
5735 * TX power calibration is handled automatically by the firmware
5738 memset(&cmd, 0, sizeof cmd);
5739 cmd.global_limit = 2 * IWN5000_TXPOWER_MAX_DBM; /* 16 dBm */
5740 cmd.flags = IWN5000_TXPOWER_NO_CLOSED;
5741 cmd.srv_limit = IWN5000_TXPOWER_AUTO;
5742 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_XMIT,
5743 "%s: setting TX power; rev=%d\n",
5745 IWN_UCODE_API(sc->ucode_rev));
5746 if (IWN_UCODE_API(sc->ucode_rev) == 1)
5747 cmdid = IWN_CMD_TXPOWER_DBM_V1;
5749 cmdid = IWN_CMD_TXPOWER_DBM;
5750 return iwn_cmd(sc, cmdid, &cmd, sizeof cmd, async);
5754 * Retrieve the maximum RSSI (in dBm) among receivers.
5757 iwn4965_get_rssi(struct iwn_softc *sc, struct iwn_rx_stat *stat)
5759 struct iwn4965_rx_phystat *phy = (void *)stat->phybuf;
5763 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
5765 mask = (le16toh(phy->antenna) >> 4) & IWN_ANT_ABC;
5766 agc = (le16toh(phy->agc) >> 7) & 0x7f;
5769 if (mask & IWN_ANT_A)
5770 rssi = MAX(rssi, phy->rssi[0]);
5771 if (mask & IWN_ANT_B)
5772 rssi = MAX(rssi, phy->rssi[2]);
5773 if (mask & IWN_ANT_C)
5774 rssi = MAX(rssi, phy->rssi[4]);
5776 DPRINTF(sc, IWN_DEBUG_RECV,
5777 "%s: agc %d mask 0x%x rssi %d %d %d result %d\n", __func__, agc,
5778 mask, phy->rssi[0], phy->rssi[2], phy->rssi[4],
5779 rssi - agc - IWN_RSSI_TO_DBM);
5780 return rssi - agc - IWN_RSSI_TO_DBM;
5784 iwn5000_get_rssi(struct iwn_softc *sc, struct iwn_rx_stat *stat)
5786 struct iwn5000_rx_phystat *phy = (void *)stat->phybuf;
5790 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
5792 agc = (le32toh(phy->agc) >> 9) & 0x7f;
5794 rssi = MAX(le16toh(phy->rssi[0]) & 0xff,
5795 le16toh(phy->rssi[1]) & 0xff);
5796 rssi = MAX(le16toh(phy->rssi[2]) & 0xff, rssi);
5798 DPRINTF(sc, IWN_DEBUG_RECV,
5799 "%s: agc %d rssi %d %d %d result %d\n", __func__, agc,
5800 phy->rssi[0], phy->rssi[1], phy->rssi[2],
5801 rssi - agc - IWN_RSSI_TO_DBM);
5802 return rssi - agc - IWN_RSSI_TO_DBM;
5806 * Retrieve the average noise (in dBm) among receivers.
5809 iwn_get_noise(const struct iwn_rx_general_stats *stats)
5811 int i, total, nbant, noise;
5814 for (i = 0; i < 3; i++) {
5815 if ((noise = le32toh(stats->noise[i]) & 0xff) == 0)
5820 /* There should be at least one antenna but check anyway. */
5821 return (nbant == 0) ? -127 : (total / nbant) - 107;
5825 * Compute temperature (in degC) from last received statistics.
5828 iwn4965_get_temperature(struct iwn_softc *sc)
5830 struct iwn_ucode_info *uc = &sc->ucode_info;
5831 int32_t r1, r2, r3, r4, temp;
5833 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
5835 r1 = le32toh(uc->temp[0].chan20MHz);
5836 r2 = le32toh(uc->temp[1].chan20MHz);
5837 r3 = le32toh(uc->temp[2].chan20MHz);
5838 r4 = le32toh(sc->rawtemp);
5840 if (r1 == r3) /* Prevents division by 0 (should not happen). */
5843 /* Sign-extend 23-bit R4 value to 32-bit. */
5844 r4 = ((r4 & 0xffffff) ^ 0x800000) - 0x800000;
5845 /* Compute temperature in Kelvin. */
5846 temp = (259 * (r4 - r2)) / (r3 - r1);
5847 temp = (temp * 97) / 100 + 8;
5849 DPRINTF(sc, IWN_DEBUG_ANY, "temperature %dK/%dC\n", temp,
5851 return IWN_KTOC(temp);
5855 iwn5000_get_temperature(struct iwn_softc *sc)
5859 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
5862 * Temperature is not used by the driver for 5000 Series because
5863 * TX power calibration is handled by firmware.
5865 temp = le32toh(sc->rawtemp);
5866 if (sc->hw_type == IWN_HW_REV_TYPE_5150) {
5867 temp = (temp / -5) + sc->temp_off;
5868 temp = IWN_KTOC(temp);
5874 * Initialize sensitivity calibration state machine.
5877 iwn_init_sensitivity(struct iwn_softc *sc)
5879 struct iwn_ops *ops = &sc->ops;
5880 struct iwn_calib_state *calib = &sc->calib;
5884 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
5886 /* Reset calibration state machine. */
5887 memset(calib, 0, sizeof (*calib));
5888 calib->state = IWN_CALIB_STATE_INIT;
5889 calib->cck_state = IWN_CCK_STATE_HIFA;
5890 /* Set initial correlation values. */
5891 calib->ofdm_x1 = sc->limits->min_ofdm_x1;
5892 calib->ofdm_mrc_x1 = sc->limits->min_ofdm_mrc_x1;
5893 calib->ofdm_x4 = sc->limits->min_ofdm_x4;
5894 calib->ofdm_mrc_x4 = sc->limits->min_ofdm_mrc_x4;
5895 calib->cck_x4 = 125;
5896 calib->cck_mrc_x4 = sc->limits->min_cck_mrc_x4;
5897 calib->energy_cck = sc->limits->energy_cck;
5899 /* Write initial sensitivity. */
5900 if ((error = iwn_send_sensitivity(sc)) != 0)
5903 /* Write initial gains. */
5904 if ((error = ops->init_gains(sc)) != 0)
5907 /* Request statistics at each beacon interval. */
5909 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "%s: sending request for statistics\n",
5911 return iwn_cmd(sc, IWN_CMD_GET_STATISTICS, &flags, sizeof flags, 1);
5915 * Collect noise and RSSI statistics for the first 20 beacons received
5916 * after association and use them to determine connected antennas and
5917 * to set differential gains.
5920 iwn_collect_noise(struct iwn_softc *sc,
5921 const struct iwn_rx_general_stats *stats)
5923 struct iwn_ops *ops = &sc->ops;
5924 struct iwn_calib_state *calib = &sc->calib;
5925 struct ieee80211com *ic = &sc->sc_ic;
5929 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
5931 /* Accumulate RSSI and noise for all 3 antennas. */
5932 for (i = 0; i < 3; i++) {
5933 calib->rssi[i] += le32toh(stats->rssi[i]) & 0xff;
5934 calib->noise[i] += le32toh(stats->noise[i]) & 0xff;
5936 /* NB: We update differential gains only once after 20 beacons. */
5937 if (++calib->nbeacons < 20)
5940 /* Determine highest average RSSI. */
5941 val = MAX(calib->rssi[0], calib->rssi[1]);
5942 val = MAX(calib->rssi[2], val);
5944 /* Determine which antennas are connected. */
5945 sc->chainmask = sc->rxchainmask;
5946 for (i = 0; i < 3; i++)
5947 if (val - calib->rssi[i] > 15 * 20)
5948 sc->chainmask &= ~(1 << i);
5949 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_XMIT,
5950 "%s: RX chains mask: theoretical=0x%x, actual=0x%x\n",
5951 __func__, sc->rxchainmask, sc->chainmask);
5953 /* If none of the TX antennas are connected, keep at least one. */
5954 if ((sc->chainmask & sc->txchainmask) == 0)
5955 sc->chainmask |= IWN_LSB(sc->txchainmask);
5957 (void)ops->set_gains(sc);
5958 calib->state = IWN_CALIB_STATE_RUN;
5961 /* XXX Disable RX chains with no antennas connected. */
5962 sc->rxon->rxchain = htole16(IWN_RXCHAIN_SEL(sc->chainmask));
5963 if (sc->sc_is_scanning)
5964 device_printf(sc->sc_dev,
5965 "%s: is_scanning set, before RXON\n",
5967 (void)iwn_cmd(sc, IWN_CMD_RXON, sc->rxon, sc->rxonsz, 1);
5970 /* Enable power-saving mode if requested by user. */
5971 if (ic->ic_flags & IEEE80211_F_PMGTON)
5972 (void)iwn_set_pslevel(sc, 0, 3, 1);
5974 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__);
5979 iwn4965_init_gains(struct iwn_softc *sc)
5981 struct iwn_phy_calib_gain cmd;
5983 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
5985 memset(&cmd, 0, sizeof cmd);
5986 cmd.code = IWN4965_PHY_CALIB_DIFF_GAIN;
5987 /* Differential gains initially set to 0 for all 3 antennas. */
5988 DPRINTF(sc, IWN_DEBUG_CALIBRATE,
5989 "%s: setting initial differential gains\n", __func__);
5990 return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 1);
5994 iwn5000_init_gains(struct iwn_softc *sc)
5996 struct iwn_phy_calib cmd;
5998 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
6000 memset(&cmd, 0, sizeof cmd);
6001 cmd.code = sc->reset_noise_gain;
6004 DPRINTF(sc, IWN_DEBUG_CALIBRATE,
6005 "%s: setting initial differential gains\n", __func__);
6006 return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 1);
6010 iwn4965_set_gains(struct iwn_softc *sc)
6012 struct iwn_calib_state *calib = &sc->calib;
6013 struct iwn_phy_calib_gain cmd;
6014 int i, delta, noise;
6016 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
6018 /* Get minimal noise among connected antennas. */
6019 noise = INT_MAX; /* NB: There's at least one antenna. */
6020 for (i = 0; i < 3; i++)
6021 if (sc->chainmask & (1 << i))
6022 noise = MIN(calib->noise[i], noise);
6024 memset(&cmd, 0, sizeof cmd);
6025 cmd.code = IWN4965_PHY_CALIB_DIFF_GAIN;
6026 /* Set differential gains for connected antennas. */
6027 for (i = 0; i < 3; i++) {
6028 if (sc->chainmask & (1 << i)) {
6029 /* Compute attenuation (in unit of 1.5dB). */
6030 delta = (noise - (int32_t)calib->noise[i]) / 30;
6031 /* NB: delta <= 0 */
6032 /* Limit to [-4.5dB,0]. */
6033 cmd.gain[i] = MIN(abs(delta), 3);
6035 cmd.gain[i] |= 1 << 2; /* sign bit */
6038 DPRINTF(sc, IWN_DEBUG_CALIBRATE,
6039 "setting differential gains Ant A/B/C: %x/%x/%x (%x)\n",
6040 cmd.gain[0], cmd.gain[1], cmd.gain[2], sc->chainmask);
6041 return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 1);
6045 iwn5000_set_gains(struct iwn_softc *sc)
6047 struct iwn_calib_state *calib = &sc->calib;
6048 struct iwn_phy_calib_gain cmd;
6049 int i, ant, div, delta;
6051 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
6053 /* We collected 20 beacons and !=6050 need a 1.5 factor. */
6054 div = (sc->hw_type == IWN_HW_REV_TYPE_6050) ? 20 : 30;
6056 memset(&cmd, 0, sizeof cmd);
6057 cmd.code = sc->noise_gain;
6060 /* Get first available RX antenna as referential. */
6061 ant = IWN_LSB(sc->rxchainmask);
6062 /* Set differential gains for other antennas. */
6063 for (i = ant + 1; i < 3; i++) {
6064 if (sc->chainmask & (1 << i)) {
6065 /* The delta is relative to antenna "ant". */
6066 delta = ((int32_t)calib->noise[ant] -
6067 (int32_t)calib->noise[i]) / div;
6068 /* Limit to [-4.5dB,+4.5dB]. */
6069 cmd.gain[i - 1] = MIN(abs(delta), 3);
6071 cmd.gain[i - 1] |= 1 << 2; /* sign bit */
6074 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_XMIT,
6075 "setting differential gains Ant B/C: %x/%x (%x)\n",
6076 cmd.gain[0], cmd.gain[1], sc->chainmask);
6077 return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 1);
6081 * Tune RF RX sensitivity based on the number of false alarms detected
6082 * during the last beacon period.
6085 iwn_tune_sensitivity(struct iwn_softc *sc, const struct iwn_rx_stats *stats)
6087 #define inc(val, inc, max) \
6088 if ((val) < (max)) { \
6089 if ((val) < (max) - (inc)) \
6095 #define dec(val, dec, min) \
6096 if ((val) > (min)) { \
6097 if ((val) > (min) + (dec)) \
6104 const struct iwn_sensitivity_limits *limits = sc->limits;
6105 struct iwn_calib_state *calib = &sc->calib;
6106 uint32_t val, rxena, fa;
6107 uint32_t energy[3], energy_min;
6108 uint8_t noise[3], noise_ref;
6109 int i, needs_update = 0;
6111 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
6113 /* Check that we've been enabled long enough. */
6114 if ((rxena = le32toh(stats->general.load)) == 0){
6115 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end not so long\n", __func__);
6119 /* Compute number of false alarms since last call for OFDM. */
6120 fa = le32toh(stats->ofdm.bad_plcp) - calib->bad_plcp_ofdm;
6121 fa += le32toh(stats->ofdm.fa) - calib->fa_ofdm;
6122 fa *= 200 * IEEE80211_DUR_TU; /* 200TU */
6124 if (fa > 50 * rxena) {
6125 /* High false alarm count, decrease sensitivity. */
6126 DPRINTF(sc, IWN_DEBUG_CALIBRATE,
6127 "%s: OFDM high false alarm count: %u\n", __func__, fa);
6128 inc(calib->ofdm_x1, 1, limits->max_ofdm_x1);
6129 inc(calib->ofdm_mrc_x1, 1, limits->max_ofdm_mrc_x1);
6130 inc(calib->ofdm_x4, 1, limits->max_ofdm_x4);
6131 inc(calib->ofdm_mrc_x4, 1, limits->max_ofdm_mrc_x4);
6133 } else if (fa < 5 * rxena) {
6134 /* Low false alarm count, increase sensitivity. */
6135 DPRINTF(sc, IWN_DEBUG_CALIBRATE,
6136 "%s: OFDM low false alarm count: %u\n", __func__, fa);
6137 dec(calib->ofdm_x1, 1, limits->min_ofdm_x1);
6138 dec(calib->ofdm_mrc_x1, 1, limits->min_ofdm_mrc_x1);
6139 dec(calib->ofdm_x4, 1, limits->min_ofdm_x4);
6140 dec(calib->ofdm_mrc_x4, 1, limits->min_ofdm_mrc_x4);
6143 /* Compute maximum noise among 3 receivers. */
6144 for (i = 0; i < 3; i++)
6145 noise[i] = (le32toh(stats->general.noise[i]) >> 8) & 0xff;
6146 val = MAX(noise[0], noise[1]);
6147 val = MAX(noise[2], val);
6148 /* Insert it into our samples table. */
6149 calib->noise_samples[calib->cur_noise_sample] = val;
6150 calib->cur_noise_sample = (calib->cur_noise_sample + 1) % 20;
6152 /* Compute maximum noise among last 20 samples. */
6153 noise_ref = calib->noise_samples[0];
6154 for (i = 1; i < 20; i++)
6155 noise_ref = MAX(noise_ref, calib->noise_samples[i]);
6157 /* Compute maximum energy among 3 receivers. */
6158 for (i = 0; i < 3; i++)
6159 energy[i] = le32toh(stats->general.energy[i]);
6160 val = MIN(energy[0], energy[1]);
6161 val = MIN(energy[2], val);
6162 /* Insert it into our samples table. */
6163 calib->energy_samples[calib->cur_energy_sample] = val;
6164 calib->cur_energy_sample = (calib->cur_energy_sample + 1) % 10;
6166 /* Compute minimum energy among last 10 samples. */
6167 energy_min = calib->energy_samples[0];
6168 for (i = 1; i < 10; i++)
6169 energy_min = MAX(energy_min, calib->energy_samples[i]);
6172 /* Compute number of false alarms since last call for CCK. */
6173 fa = le32toh(stats->cck.bad_plcp) - calib->bad_plcp_cck;
6174 fa += le32toh(stats->cck.fa) - calib->fa_cck;
6175 fa *= 200 * IEEE80211_DUR_TU; /* 200TU */
6177 if (fa > 50 * rxena) {
6178 /* High false alarm count, decrease sensitivity. */
6179 DPRINTF(sc, IWN_DEBUG_CALIBRATE,
6180 "%s: CCK high false alarm count: %u\n", __func__, fa);
6181 calib->cck_state = IWN_CCK_STATE_HIFA;
6184 if (calib->cck_x4 > 160) {
6185 calib->noise_ref = noise_ref;
6186 if (calib->energy_cck > 2)
6187 dec(calib->energy_cck, 2, energy_min);
6189 if (calib->cck_x4 < 160) {
6190 calib->cck_x4 = 161;
6193 inc(calib->cck_x4, 3, limits->max_cck_x4);
6195 inc(calib->cck_mrc_x4, 3, limits->max_cck_mrc_x4);
6197 } else if (fa < 5 * rxena) {
6198 /* Low false alarm count, increase sensitivity. */
6199 DPRINTF(sc, IWN_DEBUG_CALIBRATE,
6200 "%s: CCK low false alarm count: %u\n", __func__, fa);
6201 calib->cck_state = IWN_CCK_STATE_LOFA;
6204 if (calib->cck_state != IWN_CCK_STATE_INIT &&
6205 (((int32_t)calib->noise_ref - (int32_t)noise_ref) > 2 ||
6206 calib->low_fa > 100)) {
6207 inc(calib->energy_cck, 2, limits->min_energy_cck);
6208 dec(calib->cck_x4, 3, limits->min_cck_x4);
6209 dec(calib->cck_mrc_x4, 3, limits->min_cck_mrc_x4);
6212 /* Not worth to increase or decrease sensitivity. */
6213 DPRINTF(sc, IWN_DEBUG_CALIBRATE,
6214 "%s: CCK normal false alarm count: %u\n", __func__, fa);
6216 calib->noise_ref = noise_ref;
6218 if (calib->cck_state == IWN_CCK_STATE_HIFA) {
6219 /* Previous interval had many false alarms. */
6220 dec(calib->energy_cck, 8, energy_min);
6222 calib->cck_state = IWN_CCK_STATE_INIT;
6226 (void)iwn_send_sensitivity(sc);
6228 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__);
6235 iwn_send_sensitivity(struct iwn_softc *sc)
6237 struct iwn_calib_state *calib = &sc->calib;
6238 struct iwn_enhanced_sensitivity_cmd cmd;
6241 memset(&cmd, 0, sizeof cmd);
6242 len = sizeof (struct iwn_sensitivity_cmd);
6243 cmd.which = IWN_SENSITIVITY_WORKTBL;
6244 /* OFDM modulation. */
6245 cmd.corr_ofdm_x1 = htole16(calib->ofdm_x1);
6246 cmd.corr_ofdm_mrc_x1 = htole16(calib->ofdm_mrc_x1);
6247 cmd.corr_ofdm_x4 = htole16(calib->ofdm_x4);
6248 cmd.corr_ofdm_mrc_x4 = htole16(calib->ofdm_mrc_x4);
6249 cmd.energy_ofdm = htole16(sc->limits->energy_ofdm);
6250 cmd.energy_ofdm_th = htole16(62);
6251 /* CCK modulation. */
6252 cmd.corr_cck_x4 = htole16(calib->cck_x4);
6253 cmd.corr_cck_mrc_x4 = htole16(calib->cck_mrc_x4);
6254 cmd.energy_cck = htole16(calib->energy_cck);
6255 /* Barker modulation: use default values. */
6256 cmd.corr_barker = htole16(190);
6257 cmd.corr_barker_mrc = htole16(sc->limits->barker_mrc);
6259 DPRINTF(sc, IWN_DEBUG_CALIBRATE,
6260 "%s: set sensitivity %d/%d/%d/%d/%d/%d/%d\n", __func__,
6261 calib->ofdm_x1, calib->ofdm_mrc_x1, calib->ofdm_x4,
6262 calib->ofdm_mrc_x4, calib->cck_x4,
6263 calib->cck_mrc_x4, calib->energy_cck);
6265 if (!(sc->sc_flags & IWN_FLAG_ENH_SENS))
6267 /* Enhanced sensitivity settings. */
6268 len = sizeof (struct iwn_enhanced_sensitivity_cmd);
6269 cmd.ofdm_det_slope_mrc = htole16(668);
6270 cmd.ofdm_det_icept_mrc = htole16(4);
6271 cmd.ofdm_det_slope = htole16(486);
6272 cmd.ofdm_det_icept = htole16(37);
6273 cmd.cck_det_slope_mrc = htole16(853);
6274 cmd.cck_det_icept_mrc = htole16(4);
6275 cmd.cck_det_slope = htole16(476);
6276 cmd.cck_det_icept = htole16(99);
6278 return iwn_cmd(sc, IWN_CMD_SET_SENSITIVITY, &cmd, len, 1);
6282 * Look at the increase of PLCP errors over time; if it exceeds
6283 * a programmed threshold then trigger an RF retune.
6286 iwn_check_rx_recovery(struct iwn_softc *sc, struct iwn_stats *rs)
6288 int32_t delta_ofdm, delta_ht, delta_cck;
6289 struct iwn_calib_state *calib = &sc->calib;
6290 int delta_ticks, cur_ticks;
6295 * Calculate the difference between the current and
6296 * previous statistics.
6298 delta_cck = le32toh(rs->rx.cck.bad_plcp) - calib->bad_plcp_cck;
6299 delta_ofdm = le32toh(rs->rx.ofdm.bad_plcp) - calib->bad_plcp_ofdm;
6300 delta_ht = le32toh(rs->rx.ht.bad_plcp) - calib->bad_plcp_ht;
6303 * Calculate the delta in time between successive statistics
6304 * messages. Yes, it can roll over; so we make sure that
6305 * this doesn't happen.
6307 * XXX go figure out what to do about rollover
6308 * XXX go figure out what to do if ticks rolls over to -ve instead!
6309 * XXX go stab signed integer overflow undefined-ness in the face.
6312 delta_ticks = cur_ticks - sc->last_calib_ticks;
6315 * If any are negative, then the firmware likely reset; so just
6316 * bail. We'll pick this up next time.
6318 if (delta_cck < 0 || delta_ofdm < 0 || delta_ht < 0 || delta_ticks < 0)
6322 * delta_ticks is in ticks; we need to convert it up to milliseconds
6323 * so we can do some useful math with it.
6325 delta_msec = ticks_to_msecs(delta_ticks);
6328 * Calculate what our threshold is given the current delta_msec.
6330 thresh = sc->base_params->plcp_err_threshold * delta_msec;
6332 DPRINTF(sc, IWN_DEBUG_STATE,
6333 "%s: time delta: %d; cck=%d, ofdm=%d, ht=%d, total=%d, thresh=%d\n",
6339 (delta_msec + delta_cck + delta_ofdm + delta_ht),
6343 * If we need a retune, then schedule a single channel scan
6344 * to a channel that isn't the currently active one!
6346 * The math from linux iwlwifi:
6348 * if ((delta * 100 / msecs) > threshold)
6350 if (thresh > 0 && (delta_cck + delta_ofdm + delta_ht) * 100 > thresh) {
6351 DPRINTF(sc, IWN_DEBUG_ANY,
6352 "%s: PLCP error threshold raw (%d) comparison (%d) "
6353 "over limit (%d); retune!\n",
6355 (delta_cck + delta_ofdm + delta_ht),
6356 (delta_cck + delta_ofdm + delta_ht) * 100,
6362 * Set STA mode power saving level (between 0 and 5).
6363 * Level 0 is CAM (Continuously Aware Mode), 5 is for maximum power saving.
6366 iwn_set_pslevel(struct iwn_softc *sc, int dtim, int level, int async)
6368 struct iwn_pmgt_cmd cmd;
6369 const struct iwn_pmgt *pmgt;
6370 uint32_t max, skip_dtim;
6374 DPRINTF(sc, IWN_DEBUG_PWRSAVE,
6375 "%s: dtim=%d, level=%d, async=%d\n",
6381 /* Select which PS parameters to use. */
6383 pmgt = &iwn_pmgt[0][level];
6384 else if (dtim <= 10)
6385 pmgt = &iwn_pmgt[1][level];
6387 pmgt = &iwn_pmgt[2][level];
6389 memset(&cmd, 0, sizeof cmd);
6390 if (level != 0) /* not CAM */
6391 cmd.flags |= htole16(IWN_PS_ALLOW_SLEEP);
6393 cmd.flags |= htole16(IWN_PS_FAST_PD);
6394 /* Retrieve PCIe Active State Power Management (ASPM). */
6395 reg = pci_read_config(sc->sc_dev, sc->sc_cap_off + PCIER_LINK_CTL, 4);
6396 if (!(reg & PCIEM_LINK_CTL_ASPMC_L0S)) /* L0s Entry disabled. */
6397 cmd.flags |= htole16(IWN_PS_PCI_PMGT);
6398 cmd.rxtimeout = htole32(pmgt->rxtimeout * 1024);
6399 cmd.txtimeout = htole32(pmgt->txtimeout * 1024);
6405 skip_dtim = pmgt->skip_dtim;
6406 if (skip_dtim != 0) {
6407 cmd.flags |= htole16(IWN_PS_SLEEP_OVER_DTIM);
6408 max = pmgt->intval[4];
6409 if (max == (uint32_t)-1)
6410 max = dtim * (skip_dtim + 1);
6411 else if (max > dtim)
6412 max = rounddown(max, dtim);
6415 for (i = 0; i < 5; i++)
6416 cmd.intval[i] = htole32(MIN(max, pmgt->intval[i]));
6418 DPRINTF(sc, IWN_DEBUG_RESET, "setting power saving level to %d\n",
6420 return iwn_cmd(sc, IWN_CMD_SET_POWER_MODE, &cmd, sizeof cmd, async);
6424 iwn_send_btcoex(struct iwn_softc *sc)
6426 struct iwn_bluetooth cmd;
6428 memset(&cmd, 0, sizeof cmd);
6429 cmd.flags = IWN_BT_COEX_CHAN_ANN | IWN_BT_COEX_BT_PRIO;
6430 cmd.lead_time = IWN_BT_LEAD_TIME_DEF;
6431 cmd.max_kill = IWN_BT_MAX_KILL_DEF;
6432 DPRINTF(sc, IWN_DEBUG_RESET, "%s: configuring bluetooth coexistence\n",
6434 return iwn_cmd(sc, IWN_CMD_BT_COEX, &cmd, sizeof(cmd), 0);
6438 iwn_send_advanced_btcoex(struct iwn_softc *sc)
6440 static const uint32_t btcoex_3wire[12] = {
6441 0xaaaaaaaa, 0xaaaaaaaa, 0xaeaaaaaa, 0xaaaaaaaa,
6442 0xcc00ff28, 0x0000aaaa, 0xcc00aaaa, 0x0000aaaa,
6443 0xc0004000, 0x00004000, 0xf0005000, 0xf0005000,
6445 struct iwn6000_btcoex_config btconfig;
6446 struct iwn2000_btcoex_config btconfig2k;
6447 struct iwn_btcoex_priotable btprio;
6448 struct iwn_btcoex_prot btprot;
6452 memset(&btconfig, 0, sizeof btconfig);
6453 memset(&btconfig2k, 0, sizeof btconfig2k);
6455 flags = IWN_BT_FLAG_COEX6000_MODE_3W <<
6456 IWN_BT_FLAG_COEX6000_MODE_SHIFT; // Done as is in linux kernel 3.2
6458 if (sc->base_params->bt_sco_disable)
6459 flags &= ~IWN_BT_FLAG_SYNC_2_BT_DISABLE;
6461 flags |= IWN_BT_FLAG_SYNC_2_BT_DISABLE;
6463 flags |= IWN_BT_FLAG_COEX6000_CHAN_INHIBITION;
6465 /* Default flags result is 145 as old value */
6468 * Flags value has to be review. Values must change if we
6469 * which to disable it
6471 if (sc->base_params->bt_session_2) {
6472 btconfig2k.flags = flags;
6473 btconfig2k.max_kill = 5;
6474 btconfig2k.bt3_t7_timer = 1;
6475 btconfig2k.kill_ack = htole32(0xffff0000);
6476 btconfig2k.kill_cts = htole32(0xffff0000);
6477 btconfig2k.sample_time = 2;
6478 btconfig2k.bt3_t2_timer = 0xc;
6480 for (i = 0; i < 12; i++)
6481 btconfig2k.lookup_table[i] = htole32(btcoex_3wire[i]);
6482 btconfig2k.valid = htole16(0xff);
6483 btconfig2k.prio_boost = htole32(0xf0);
6484 DPRINTF(sc, IWN_DEBUG_RESET,
6485 "%s: configuring advanced bluetooth coexistence"
6486 " session 2, flags : 0x%x\n",
6489 error = iwn_cmd(sc, IWN_CMD_BT_COEX, &btconfig2k,
6490 sizeof(btconfig2k), 1);
6492 btconfig.flags = flags;
6493 btconfig.max_kill = 5;
6494 btconfig.bt3_t7_timer = 1;
6495 btconfig.kill_ack = htole32(0xffff0000);
6496 btconfig.kill_cts = htole32(0xffff0000);
6497 btconfig.sample_time = 2;
6498 btconfig.bt3_t2_timer = 0xc;
6500 for (i = 0; i < 12; i++)
6501 btconfig.lookup_table[i] = htole32(btcoex_3wire[i]);
6502 btconfig.valid = htole16(0xff);
6503 btconfig.prio_boost = 0xf0;
6504 DPRINTF(sc, IWN_DEBUG_RESET,
6505 "%s: configuring advanced bluetooth coexistence,"
6509 error = iwn_cmd(sc, IWN_CMD_BT_COEX, &btconfig,
6510 sizeof(btconfig), 1);
6516 memset(&btprio, 0, sizeof btprio);
6517 btprio.calib_init1 = 0x6;
6518 btprio.calib_init2 = 0x7;
6519 btprio.calib_periodic_low1 = 0x2;
6520 btprio.calib_periodic_low2 = 0x3;
6521 btprio.calib_periodic_high1 = 0x4;
6522 btprio.calib_periodic_high2 = 0x5;
6524 btprio.scan52 = 0x8;
6525 btprio.scan24 = 0xa;
6526 error = iwn_cmd(sc, IWN_CMD_BT_COEX_PRIOTABLE, &btprio, sizeof(btprio),
6531 /* Force BT state machine change. */
6532 memset(&btprot, 0, sizeof btprot);
6535 error = iwn_cmd(sc, IWN_CMD_BT_COEX_PROT, &btprot, sizeof(btprot), 1);
6539 return iwn_cmd(sc, IWN_CMD_BT_COEX_PROT, &btprot, sizeof(btprot), 1);
6543 iwn5000_runtime_calib(struct iwn_softc *sc)
6545 struct iwn5000_calib_config cmd;
6547 memset(&cmd, 0, sizeof cmd);
6548 cmd.ucode.once.enable = 0xffffffff;
6549 cmd.ucode.once.start = IWN5000_CALIB_DC;
6550 DPRINTF(sc, IWN_DEBUG_CALIBRATE,
6551 "%s: configuring runtime calibration\n", __func__);
6552 return iwn_cmd(sc, IWN5000_CMD_CALIB_CONFIG, &cmd, sizeof(cmd), 0);
6556 iwn_get_rxon_ht_flags(struct iwn_softc *sc, struct ieee80211_channel *c)
6558 struct ieee80211com *ic = &sc->sc_ic;
6559 uint32_t htflags = 0;
6561 if (! IEEE80211_IS_CHAN_HT(c))
6564 htflags |= IWN_RXON_HT_PROTMODE(ic->ic_curhtprotmode);
6566 if (IEEE80211_IS_CHAN_HT40(c)) {
6567 switch (ic->ic_curhtprotmode) {
6568 case IEEE80211_HTINFO_OPMODE_HT20PR:
6569 htflags |= IWN_RXON_HT_MODEPURE40;
6572 htflags |= IWN_RXON_HT_MODEMIXED;
6576 if (IEEE80211_IS_CHAN_HT40D(c))
6577 htflags |= IWN_RXON_HT_HT40MINUS;
6583 iwn_check_bss_filter(struct iwn_softc *sc)
6585 return ((sc->rxon->filter & htole32(IWN_FILTER_BSS)) != 0);
6589 iwn4965_rxon_assoc(struct iwn_softc *sc, int async)
6591 struct iwn4965_rxon_assoc cmd;
6592 struct iwn_rxon *rxon = sc->rxon;
6594 cmd.flags = rxon->flags;
6595 cmd.filter = rxon->filter;
6596 cmd.ofdm_mask = rxon->ofdm_mask;
6597 cmd.cck_mask = rxon->cck_mask;
6598 cmd.ht_single_mask = rxon->ht_single_mask;
6599 cmd.ht_dual_mask = rxon->ht_dual_mask;
6600 cmd.rxchain = rxon->rxchain;
6603 return (iwn_cmd(sc, IWN_CMD_RXON_ASSOC, &cmd, sizeof(cmd), async));
6607 iwn5000_rxon_assoc(struct iwn_softc *sc, int async)
6609 struct iwn5000_rxon_assoc cmd;
6610 struct iwn_rxon *rxon = sc->rxon;
6612 cmd.flags = rxon->flags;
6613 cmd.filter = rxon->filter;
6614 cmd.ofdm_mask = rxon->ofdm_mask;
6615 cmd.cck_mask = rxon->cck_mask;
6617 cmd.ht_single_mask = rxon->ht_single_mask;
6618 cmd.ht_dual_mask = rxon->ht_dual_mask;
6619 cmd.ht_triple_mask = rxon->ht_triple_mask;
6621 cmd.rxchain = rxon->rxchain;
6622 cmd.acquisition = rxon->acquisition;
6625 return (iwn_cmd(sc, IWN_CMD_RXON_ASSOC, &cmd, sizeof(cmd), async));
6629 iwn_send_rxon(struct iwn_softc *sc, int assoc, int async)
6631 struct iwn_ops *ops = &sc->ops;
6634 IWN_LOCK_ASSERT(sc);
6636 if (assoc && iwn_check_bss_filter(sc) != 0) {
6637 error = ops->rxon_assoc(sc, async);
6639 device_printf(sc->sc_dev,
6640 "%s: RXON_ASSOC command failed, error %d\n",
6645 if (sc->sc_is_scanning)
6646 device_printf(sc->sc_dev,
6647 "%s: is_scanning set, before RXON\n",
6650 error = iwn_cmd(sc, IWN_CMD_RXON, sc->rxon, sc->rxonsz, async);
6652 device_printf(sc->sc_dev,
6653 "%s: RXON command failed, error %d\n",
6659 * Reconfiguring RXON clears the firmware nodes table so
6660 * we must add the broadcast node again.
6662 if (iwn_check_bss_filter(sc) == 0 &&
6663 (error = iwn_add_broadcast_node(sc, async)) != 0) {
6664 device_printf(sc->sc_dev,
6665 "%s: could not add broadcast node, error %d\n",
6671 /* Configuration has changed, set TX power accordingly. */
6672 if ((error = ops->set_txpower(sc, async)) != 0) {
6673 device_printf(sc->sc_dev,
6674 "%s: could not set TX power, error %d\n",
6683 iwn_config(struct iwn_softc *sc)
6685 struct ieee80211com *ic = &sc->sc_ic;
6686 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps);
6687 const uint8_t *macaddr;
6692 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
6694 if ((sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSET)
6695 && (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSETv2)) {
6696 device_printf(sc->sc_dev,"%s: temp_offset and temp_offsetv2 are"
6697 " exclusive each together. Review NIC config file. Conf"
6698 " : 0x%08x Flags : 0x%08x \n", __func__,
6699 sc->base_params->calib_need,
6700 (IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSET |
6701 IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSETv2));
6705 /* Compute temperature calib if needed. Will be send by send calib */
6706 if (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSET) {
6707 error = iwn5000_temp_offset_calib(sc);
6709 device_printf(sc->sc_dev,
6710 "%s: could not set temperature offset\n", __func__);
6713 } else if (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSETv2) {
6714 error = iwn5000_temp_offset_calibv2(sc);
6716 device_printf(sc->sc_dev,
6717 "%s: could not compute temperature offset v2\n",
6723 if (sc->hw_type == IWN_HW_REV_TYPE_6050) {
6724 /* Configure runtime DC calibration. */
6725 error = iwn5000_runtime_calib(sc);
6727 device_printf(sc->sc_dev,
6728 "%s: could not configure runtime calibration\n",
6734 /* Configure valid TX chains for >=5000 Series. */
6735 if (sc->hw_type != IWN_HW_REV_TYPE_4965 &&
6736 IWN_UCODE_API(sc->ucode_rev) > 1) {
6737 txmask = htole32(sc->txchainmask);
6738 DPRINTF(sc, IWN_DEBUG_RESET | IWN_DEBUG_XMIT,
6739 "%s: configuring valid TX chains 0x%x\n", __func__, txmask);
6740 error = iwn_cmd(sc, IWN5000_CMD_TX_ANT_CONFIG, &txmask,
6743 device_printf(sc->sc_dev,
6744 "%s: could not configure valid TX chains, "
6745 "error %d\n", __func__, error);
6750 /* Configure bluetooth coexistence. */
6753 /* Configure bluetooth coexistence if needed. */
6754 if (sc->base_params->bt_mode == IWN_BT_ADVANCED)
6755 error = iwn_send_advanced_btcoex(sc);
6756 if (sc->base_params->bt_mode == IWN_BT_SIMPLE)
6757 error = iwn_send_btcoex(sc);
6760 device_printf(sc->sc_dev,
6761 "%s: could not configure bluetooth coexistence, error %d\n",
6766 /* Set mode, channel, RX filter and enable RX. */
6767 sc->rxon = &sc->rx_on[IWN_RXON_BSS_CTX];
6768 memset(sc->rxon, 0, sizeof (struct iwn_rxon));
6769 macaddr = vap ? vap->iv_myaddr : ic->ic_macaddr;
6770 IEEE80211_ADDR_COPY(sc->rxon->myaddr, macaddr);
6771 IEEE80211_ADDR_COPY(sc->rxon->wlap, macaddr);
6772 sc->rxon->chan = ieee80211_chan2ieee(ic, ic->ic_curchan);
6773 sc->rxon->flags = htole32(IWN_RXON_TSF | IWN_RXON_CTS_TO_SELF);
6774 if (IEEE80211_IS_CHAN_2GHZ(ic->ic_curchan))
6775 sc->rxon->flags |= htole32(IWN_RXON_AUTO | IWN_RXON_24GHZ);
6777 sc->rxon->filter = htole32(IWN_FILTER_MULTICAST);
6778 switch (ic->ic_opmode) {
6779 case IEEE80211_M_STA:
6780 sc->rxon->mode = IWN_MODE_STA;
6782 case IEEE80211_M_MONITOR:
6783 sc->rxon->mode = IWN_MODE_MONITOR;
6786 /* Should not get there. */
6789 iwn_set_promisc(sc);
6790 sc->rxon->cck_mask = 0x0f; /* not yet negotiated */
6791 sc->rxon->ofdm_mask = 0xff; /* not yet negotiated */
6792 sc->rxon->ht_single_mask = 0xff;
6793 sc->rxon->ht_dual_mask = 0xff;
6794 sc->rxon->ht_triple_mask = 0xff;
6796 * In active association mode, ensure that
6797 * all the receive chains are enabled.
6799 * Since we're not yet doing SMPS, don't allow the
6800 * number of idle RX chains to be less than the active
6804 IWN_RXCHAIN_VALID(sc->rxchainmask) |
6805 IWN_RXCHAIN_MIMO_COUNT(sc->nrxchains) |
6806 IWN_RXCHAIN_IDLE_COUNT(sc->nrxchains);
6807 sc->rxon->rxchain = htole16(rxchain);
6808 DPRINTF(sc, IWN_DEBUG_RESET | IWN_DEBUG_XMIT,
6809 "%s: rxchainmask=0x%x, nrxchains=%d\n",
6814 sc->rxon->flags |= htole32(iwn_get_rxon_ht_flags(sc, ic->ic_curchan));
6816 DPRINTF(sc, IWN_DEBUG_RESET,
6817 "%s: setting configuration; flags=0x%08x\n",
6818 __func__, le32toh(sc->rxon->flags));
6819 if ((error = iwn_send_rxon(sc, 0, 0)) != 0) {
6820 device_printf(sc->sc_dev, "%s: could not send RXON\n",
6825 if ((error = iwn_set_critical_temp(sc)) != 0) {
6826 device_printf(sc->sc_dev,
6827 "%s: could not set critical temperature\n", __func__);
6831 /* Set power saving level to CAM during initialization. */
6832 if ((error = iwn_set_pslevel(sc, 0, 0, 0)) != 0) {
6833 device_printf(sc->sc_dev,
6834 "%s: could not set power saving level\n", __func__);
6838 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__);
6844 iwn_get_active_dwell_time(struct iwn_softc *sc,
6845 struct ieee80211_channel *c, uint8_t n_probes)
6847 /* No channel? Default to 2GHz settings */
6848 if (c == NULL || IEEE80211_IS_CHAN_2GHZ(c)) {
6849 return (IWN_ACTIVE_DWELL_TIME_2GHZ +
6850 IWN_ACTIVE_DWELL_FACTOR_2GHZ * (n_probes + 1));
6853 /* 5GHz dwell time */
6854 return (IWN_ACTIVE_DWELL_TIME_5GHZ +
6855 IWN_ACTIVE_DWELL_FACTOR_5GHZ * (n_probes + 1));
6859 * Limit the total dwell time to 85% of the beacon interval.
6861 * Returns the dwell time in milliseconds.
6864 iwn_limit_dwell(struct iwn_softc *sc, uint16_t dwell_time)
6866 struct ieee80211com *ic = &sc->sc_ic;
6867 struct ieee80211vap *vap = NULL;
6870 /* bintval is in TU (1.024mS) */
6871 if (! TAILQ_EMPTY(&ic->ic_vaps)) {
6872 vap = TAILQ_FIRST(&ic->ic_vaps);
6873 bintval = vap->iv_bss->ni_intval;
6877 * If it's non-zero, we should calculate the minimum of
6878 * it and the DWELL_BASE.
6880 * XXX Yes, the math should take into account that bintval
6881 * is 1.024mS, not 1mS..
6884 DPRINTF(sc, IWN_DEBUG_SCAN,
6888 return (MIN(IWN_PASSIVE_DWELL_BASE, ((bintval * 85) / 100)));
6891 /* No association context? Default */
6892 return (IWN_PASSIVE_DWELL_BASE);
6896 iwn_get_passive_dwell_time(struct iwn_softc *sc, struct ieee80211_channel *c)
6900 if (c == NULL || IEEE80211_IS_CHAN_2GHZ(c)) {
6901 passive = IWN_PASSIVE_DWELL_BASE + IWN_PASSIVE_DWELL_TIME_2GHZ;
6903 passive = IWN_PASSIVE_DWELL_BASE + IWN_PASSIVE_DWELL_TIME_5GHZ;
6906 /* Clamp to the beacon interval if we're associated */
6907 return (iwn_limit_dwell(sc, passive));
6911 iwn_scan(struct iwn_softc *sc, struct ieee80211vap *vap,
6912 struct ieee80211_scan_state *ss, struct ieee80211_channel *c)
6914 struct ieee80211com *ic = &sc->sc_ic;
6915 struct ieee80211_node *ni = vap->iv_bss;
6916 struct iwn_scan_hdr *hdr;
6917 struct iwn_cmd_data *tx;
6918 struct iwn_scan_essid *essid;
6919 struct iwn_scan_chan *chan;
6920 struct ieee80211_frame *wh;
6921 struct ieee80211_rateset *rs;
6927 uint16_t dwell_active, dwell_passive;
6928 uint32_t extra, scan_service_time;
6930 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
6933 * We are absolutely not allowed to send a scan command when another
6934 * scan command is pending.
6936 if (sc->sc_is_scanning) {
6937 device_printf(sc->sc_dev, "%s: called whilst scanning!\n",
6942 /* Assign the scan channel */
6945 sc->rxon = &sc->rx_on[IWN_RXON_BSS_CTX];
6946 buf = malloc(IWN_SCAN_MAXSZ, M_DEVBUF, M_NOWAIT | M_ZERO);
6948 device_printf(sc->sc_dev,
6949 "%s: could not allocate buffer for scan command\n",
6953 hdr = (struct iwn_scan_hdr *)buf;
6955 * Move to the next channel if no frames are received within 10ms
6956 * after sending the probe request.
6958 hdr->quiet_time = htole16(10); /* timeout in milliseconds */
6959 hdr->quiet_threshold = htole16(1); /* min # of packets */
6961 * Max needs to be greater than active and passive and quiet!
6962 * It's also in microseconds!
6964 hdr->max_svc = htole32(250 * 1024);
6967 * Reset scan: interval=100
6968 * Normal scan: interval=becaon interval
6969 * suspend_time: 100 (TU)
6972 extra = (100 /* suspend_time */ / 100 /* beacon interval */) << 22;
6973 //scan_service_time = extra | ((100 /* susp */ % 100 /* int */) * 1024);
6974 scan_service_time = (4 << 22) | (100 * 1024); /* Hardcode for now! */
6975 hdr->pause_svc = htole32(scan_service_time);
6977 /* Select antennas for scanning. */
6979 IWN_RXCHAIN_VALID(sc->rxchainmask) |
6980 IWN_RXCHAIN_FORCE_MIMO_SEL(sc->rxchainmask) |
6981 IWN_RXCHAIN_DRIVER_FORCE;
6982 if (IEEE80211_IS_CHAN_A(c) &&
6983 sc->hw_type == IWN_HW_REV_TYPE_4965) {
6984 /* Ant A must be avoided in 5GHz because of an HW bug. */
6985 rxchain |= IWN_RXCHAIN_FORCE_SEL(IWN_ANT_B);
6986 } else /* Use all available RX antennas. */
6987 rxchain |= IWN_RXCHAIN_FORCE_SEL(sc->rxchainmask);
6988 hdr->rxchain = htole16(rxchain);
6989 hdr->filter = htole32(IWN_FILTER_MULTICAST | IWN_FILTER_BEACON);
6991 tx = (struct iwn_cmd_data *)(hdr + 1);
6992 tx->flags = htole32(IWN_TX_AUTO_SEQ);
6993 tx->id = sc->broadcast_id;
6994 tx->lifetime = htole32(IWN_LIFETIME_INFINITE);
6996 if (IEEE80211_IS_CHAN_5GHZ(c)) {
6997 /* Send probe requests at 6Mbps. */
6998 tx->rate = htole32(0xd);
6999 rs = &ic->ic_sup_rates[IEEE80211_MODE_11A];
7001 hdr->flags = htole32(IWN_RXON_24GHZ | IWN_RXON_AUTO);
7002 if (sc->hw_type == IWN_HW_REV_TYPE_4965 &&
7003 sc->rxon->associd && sc->rxon->chan > 14)
7004 tx->rate = htole32(0xd);
7006 /* Send probe requests at 1Mbps. */
7007 tx->rate = htole32(10 | IWN_RFLAG_CCK);
7009 rs = &ic->ic_sup_rates[IEEE80211_MODE_11G];
7011 /* Use the first valid TX antenna. */
7012 txant = IWN_LSB(sc->txchainmask);
7013 tx->rate |= htole32(IWN_RFLAG_ANT(txant));
7016 * Only do active scanning if we're announcing a probe request
7017 * for a given SSID (or more, if we ever add it to the driver.)
7022 * If we're scanning for a specific SSID, add it to the command.
7024 * XXX maybe look at adding support for scanning multiple SSIDs?
7026 essid = (struct iwn_scan_essid *)(tx + 1);
7028 if (ss->ss_ssid[0].len != 0) {
7029 essid[0].id = IEEE80211_ELEMID_SSID;
7030 essid[0].len = ss->ss_ssid[0].len;
7031 memcpy(essid[0].data, ss->ss_ssid[0].ssid, ss->ss_ssid[0].len);
7034 DPRINTF(sc, IWN_DEBUG_SCAN, "%s: ssid_len=%d, ssid=%*s\n",
7038 ss->ss_ssid[0].ssid);
7040 if (ss->ss_nssid > 0)
7045 * Build a probe request frame. Most of the following code is a
7046 * copy & paste of what is done in net80211.
7048 wh = (struct ieee80211_frame *)(essid + 20);
7049 wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_MGT |
7050 IEEE80211_FC0_SUBTYPE_PROBE_REQ;
7051 wh->i_fc[1] = IEEE80211_FC1_DIR_NODS;
7052 IEEE80211_ADDR_COPY(wh->i_addr1, vap->iv_ifp->if_broadcastaddr);
7053 IEEE80211_ADDR_COPY(wh->i_addr2, IF_LLADDR(vap->iv_ifp));
7054 IEEE80211_ADDR_COPY(wh->i_addr3, vap->iv_ifp->if_broadcastaddr);
7055 *(uint16_t *)&wh->i_dur[0] = 0; /* filled by HW */
7056 *(uint16_t *)&wh->i_seq[0] = 0; /* filled by HW */
7058 frm = (uint8_t *)(wh + 1);
7059 frm = ieee80211_add_ssid(frm, NULL, 0);
7060 frm = ieee80211_add_rates(frm, rs);
7061 if (rs->rs_nrates > IEEE80211_RATE_SIZE)
7062 frm = ieee80211_add_xrates(frm, rs);
7063 if (ic->ic_htcaps & IEEE80211_HTC_HT)
7064 frm = ieee80211_add_htcap(frm, ni);
7066 /* Set length of probe request. */
7067 tx->len = htole16(frm - (uint8_t *)wh);
7070 * If active scanning is requested but a certain channel is
7071 * marked passive, we can do active scanning if we detect
7074 * There is an issue with some firmware versions that triggers
7075 * a sysassert on a "good CRC threshold" of zero (== disabled),
7076 * on a radar channel even though this means that we should NOT
7079 * The "good CRC threshold" is the number of frames that we
7080 * need to receive during our dwell time on a channel before
7081 * sending out probes -- setting this to a huge value will
7082 * mean we never reach it, but at the same time work around
7083 * the aforementioned issue. Thus use IWL_GOOD_CRC_TH_NEVER
7084 * here instead of IWL_GOOD_CRC_TH_DISABLED.
7086 * This was fixed in later versions along with some other
7087 * scan changes, and the threshold behaves as a flag in those
7092 * If we're doing active scanning, set the crc_threshold
7093 * to a suitable value. This is different to active veruss
7094 * passive scanning depending upon the channel flags; the
7095 * firmware will obey that particular check for us.
7097 if (sc->tlv_feature_flags & IWN_UCODE_TLV_FLAGS_NEWSCAN)
7098 hdr->crc_threshold = is_active ?
7099 IWN_GOOD_CRC_TH_DEFAULT : IWN_GOOD_CRC_TH_DISABLED;
7101 hdr->crc_threshold = is_active ?
7102 IWN_GOOD_CRC_TH_DEFAULT : IWN_GOOD_CRC_TH_NEVER;
7104 chan = (struct iwn_scan_chan *)frm;
7105 chan->chan = htole16(ieee80211_chan2ieee(ic, c));
7107 if (ss->ss_nssid > 0)
7108 chan->flags |= htole32(IWN_CHAN_NPBREQS(1));
7109 chan->dsp_gain = 0x6e;
7112 * Set the passive/active flag depending upon the channel mode.
7113 * XXX TODO: take the is_active flag into account as well?
7115 if (c->ic_flags & IEEE80211_CHAN_PASSIVE)
7116 chan->flags |= htole32(IWN_CHAN_PASSIVE);
7118 chan->flags |= htole32(IWN_CHAN_ACTIVE);
7121 * Calculate the active/passive dwell times.
7124 dwell_active = iwn_get_active_dwell_time(sc, c, ss->ss_nssid);
7125 dwell_passive = iwn_get_passive_dwell_time(sc, c);
7127 /* Make sure they're valid */
7128 if (dwell_passive <= dwell_active)
7129 dwell_passive = dwell_active + 1;
7131 chan->active = htole16(dwell_active);
7132 chan->passive = htole16(dwell_passive);
7134 if (IEEE80211_IS_CHAN_5GHZ(c))
7135 chan->rf_gain = 0x3b;
7137 chan->rf_gain = 0x28;
7139 DPRINTF(sc, IWN_DEBUG_STATE,
7140 "%s: chan %u flags 0x%x rf_gain 0x%x "
7141 "dsp_gain 0x%x active %d passive %d scan_svc_time %d crc 0x%x "
7142 "isactive=%d numssid=%d\n", __func__,
7143 chan->chan, chan->flags, chan->rf_gain, chan->dsp_gain,
7144 dwell_active, dwell_passive, scan_service_time,
7145 hdr->crc_threshold, is_active, ss->ss_nssid);
7149 buflen = (uint8_t *)chan - buf;
7150 hdr->len = htole16(buflen);
7152 if (sc->sc_is_scanning) {
7153 device_printf(sc->sc_dev,
7154 "%s: called with is_scanning set!\n",
7157 sc->sc_is_scanning = 1;
7159 DPRINTF(sc, IWN_DEBUG_STATE, "sending scan command nchan=%d\n",
7161 error = iwn_cmd(sc, IWN_CMD_SCAN, buf, buflen, 1);
7162 free(buf, M_DEVBUF);
7164 callout_reset(&sc->scan_timeout, 5*hz, iwn_scan_timeout, sc);
7166 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__);
7172 iwn_auth(struct iwn_softc *sc, struct ieee80211vap *vap)
7174 struct ieee80211com *ic = &sc->sc_ic;
7175 struct ieee80211_node *ni = vap->iv_bss;
7178 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
7180 sc->rxon = &sc->rx_on[IWN_RXON_BSS_CTX];
7181 /* Update adapter configuration. */
7182 IEEE80211_ADDR_COPY(sc->rxon->bssid, ni->ni_bssid);
7183 sc->rxon->chan = ieee80211_chan2ieee(ic, ni->ni_chan);
7184 sc->rxon->flags = htole32(IWN_RXON_TSF | IWN_RXON_CTS_TO_SELF);
7185 if (IEEE80211_IS_CHAN_2GHZ(ni->ni_chan))
7186 sc->rxon->flags |= htole32(IWN_RXON_AUTO | IWN_RXON_24GHZ);
7187 if (ic->ic_flags & IEEE80211_F_SHSLOT)
7188 sc->rxon->flags |= htole32(IWN_RXON_SHSLOT);
7189 if (ic->ic_flags & IEEE80211_F_SHPREAMBLE)
7190 sc->rxon->flags |= htole32(IWN_RXON_SHPREAMBLE);
7191 if (IEEE80211_IS_CHAN_A(ni->ni_chan)) {
7192 sc->rxon->cck_mask = 0;
7193 sc->rxon->ofdm_mask = 0x15;
7194 } else if (IEEE80211_IS_CHAN_B(ni->ni_chan)) {
7195 sc->rxon->cck_mask = 0x03;
7196 sc->rxon->ofdm_mask = 0;
7198 /* Assume 802.11b/g. */
7199 sc->rxon->cck_mask = 0x03;
7200 sc->rxon->ofdm_mask = 0x15;
7204 sc->rxon->flags |= htole32(iwn_get_rxon_ht_flags(sc, ic->ic_curchan));
7206 DPRINTF(sc, IWN_DEBUG_STATE, "rxon chan %d flags %x cck %x ofdm %x\n",
7207 sc->rxon->chan, sc->rxon->flags, sc->rxon->cck_mask,
7208 sc->rxon->ofdm_mask);
7210 if ((error = iwn_send_rxon(sc, 0, 1)) != 0) {
7211 device_printf(sc->sc_dev, "%s: could not send RXON\n",
7216 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__);
7222 iwn_run(struct iwn_softc *sc, struct ieee80211vap *vap)
7224 struct iwn_ops *ops = &sc->ops;
7225 struct ieee80211com *ic = &sc->sc_ic;
7226 struct ieee80211_node *ni = vap->iv_bss;
7227 struct iwn_node_info node;
7230 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
7232 sc->rxon = &sc->rx_on[IWN_RXON_BSS_CTX];
7233 if (ic->ic_opmode == IEEE80211_M_MONITOR) {
7234 /* Link LED blinks while monitoring. */
7235 iwn_set_led(sc, IWN_LED_LINK, 5, 5);
7238 if ((error = iwn_set_timing(sc, ni)) != 0) {
7239 device_printf(sc->sc_dev,
7240 "%s: could not set timing, error %d\n", __func__, error);
7244 /* Update adapter configuration. */
7245 IEEE80211_ADDR_COPY(sc->rxon->bssid, ni->ni_bssid);
7246 sc->rxon->associd = htole16(IEEE80211_AID(ni->ni_associd));
7247 sc->rxon->chan = ieee80211_chan2ieee(ic, ni->ni_chan);
7248 sc->rxon->flags = htole32(IWN_RXON_TSF | IWN_RXON_CTS_TO_SELF);
7249 if (IEEE80211_IS_CHAN_2GHZ(ni->ni_chan))
7250 sc->rxon->flags |= htole32(IWN_RXON_AUTO | IWN_RXON_24GHZ);
7251 if (ic->ic_flags & IEEE80211_F_SHSLOT)
7252 sc->rxon->flags |= htole32(IWN_RXON_SHSLOT);
7253 if (ic->ic_flags & IEEE80211_F_SHPREAMBLE)
7254 sc->rxon->flags |= htole32(IWN_RXON_SHPREAMBLE);
7255 if (IEEE80211_IS_CHAN_A(ni->ni_chan)) {
7256 sc->rxon->cck_mask = 0;
7257 sc->rxon->ofdm_mask = 0x15;
7258 } else if (IEEE80211_IS_CHAN_B(ni->ni_chan)) {
7259 sc->rxon->cck_mask = 0x03;
7260 sc->rxon->ofdm_mask = 0;
7262 /* Assume 802.11b/g. */
7263 sc->rxon->cck_mask = 0x0f;
7264 sc->rxon->ofdm_mask = 0x15;
7267 sc->rxon->flags |= htole32(iwn_get_rxon_ht_flags(sc, ni->ni_chan));
7268 sc->rxon->filter |= htole32(IWN_FILTER_BSS);
7269 DPRINTF(sc, IWN_DEBUG_STATE, "rxon chan %d flags %x, curhtprotmode=%d\n",
7270 sc->rxon->chan, le32toh(sc->rxon->flags), ic->ic_curhtprotmode);
7272 if ((error = iwn_send_rxon(sc, 0, 1)) != 0) {
7273 device_printf(sc->sc_dev, "%s: could not send RXON\n",
7278 /* Fake a join to initialize the TX rate. */
7279 ((struct iwn_node *)ni)->id = IWN_ID_BSS;
7280 iwn_newassoc(ni, 1);
7283 memset(&node, 0, sizeof node);
7284 IEEE80211_ADDR_COPY(node.macaddr, ni->ni_macaddr);
7285 node.id = IWN_ID_BSS;
7286 if (IEEE80211_IS_CHAN_HT(ni->ni_chan)) {
7287 switch (ni->ni_htcap & IEEE80211_HTCAP_SMPS) {
7288 case IEEE80211_HTCAP_SMPS_ENA:
7289 node.htflags |= htole32(IWN_SMPS_MIMO_DIS);
7291 case IEEE80211_HTCAP_SMPS_DYNAMIC:
7292 node.htflags |= htole32(IWN_SMPS_MIMO_PROT);
7295 node.htflags |= htole32(IWN_AMDPU_SIZE_FACTOR(3) |
7296 IWN_AMDPU_DENSITY(5)); /* 4us */
7297 if (IEEE80211_IS_CHAN_HT40(ni->ni_chan))
7298 node.htflags |= htole32(IWN_NODE_HT40);
7300 DPRINTF(sc, IWN_DEBUG_STATE, "%s: adding BSS node\n", __func__);
7301 error = ops->add_node(sc, &node, 1);
7303 device_printf(sc->sc_dev,
7304 "%s: could not add BSS node, error %d\n", __func__, error);
7307 DPRINTF(sc, IWN_DEBUG_STATE, "%s: setting link quality for node %d\n",
7309 if ((error = iwn_set_link_quality(sc, ni)) != 0) {
7310 device_printf(sc->sc_dev,
7311 "%s: could not setup link quality for node %d, error %d\n",
7312 __func__, node.id, error);
7316 if ((error = iwn_init_sensitivity(sc)) != 0) {
7317 device_printf(sc->sc_dev,
7318 "%s: could not set sensitivity, error %d\n", __func__,
7322 /* Start periodic calibration timer. */
7323 sc->calib.state = IWN_CALIB_STATE_ASSOC;
7325 callout_reset(&sc->calib_to, msecs_to_ticks(500), iwn_calib_timeout,
7328 /* Link LED always on while associated. */
7329 iwn_set_led(sc, IWN_LED_LINK, 0, 1);
7331 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__);
7337 * This function is called by upper layer when an ADDBA request is received
7338 * from another STA and before the ADDBA response is sent.
7341 iwn_ampdu_rx_start(struct ieee80211_node *ni, struct ieee80211_rx_ampdu *rap,
7342 int baparamset, int batimeout, int baseqctl)
7344 #define MS(_v, _f) (((_v) & _f) >> _f##_S)
7345 struct iwn_softc *sc = ni->ni_ic->ic_softc;
7346 struct iwn_ops *ops = &sc->ops;
7347 struct iwn_node *wn = (void *)ni;
7348 struct iwn_node_info node;
7353 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
7355 tid = MS(le16toh(baparamset), IEEE80211_BAPS_TID);
7356 ssn = MS(le16toh(baseqctl), IEEE80211_BASEQ_START);
7358 memset(&node, 0, sizeof node);
7360 node.control = IWN_NODE_UPDATE;
7361 node.flags = IWN_FLAG_SET_ADDBA;
7362 node.addba_tid = tid;
7363 node.addba_ssn = htole16(ssn);
7364 DPRINTF(sc, IWN_DEBUG_RECV, "ADDBA RA=%d TID=%d SSN=%d\n",
7366 error = ops->add_node(sc, &node, 1);
7369 return sc->sc_ampdu_rx_start(ni, rap, baparamset, batimeout, baseqctl);
7374 * This function is called by upper layer on teardown of an HT-immediate
7375 * Block Ack agreement (eg. uppon receipt of a DELBA frame).
7378 iwn_ampdu_rx_stop(struct ieee80211_node *ni, struct ieee80211_rx_ampdu *rap)
7380 struct ieee80211com *ic = ni->ni_ic;
7381 struct iwn_softc *sc = ic->ic_softc;
7382 struct iwn_ops *ops = &sc->ops;
7383 struct iwn_node *wn = (void *)ni;
7384 struct iwn_node_info node;
7387 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
7389 /* XXX: tid as an argument */
7390 for (tid = 0; tid < WME_NUM_TID; tid++) {
7391 if (&ni->ni_rx_ampdu[tid] == rap)
7395 memset(&node, 0, sizeof node);
7397 node.control = IWN_NODE_UPDATE;
7398 node.flags = IWN_FLAG_SET_DELBA;
7399 node.delba_tid = tid;
7400 DPRINTF(sc, IWN_DEBUG_RECV, "DELBA RA=%d TID=%d\n", wn->id, tid);
7401 (void)ops->add_node(sc, &node, 1);
7402 sc->sc_ampdu_rx_stop(ni, rap);
7406 iwn_addba_request(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap,
7407 int dialogtoken, int baparamset, int batimeout)
7409 struct iwn_softc *sc = ni->ni_ic->ic_softc;
7412 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
7414 for (qid = sc->firstaggqueue; qid < sc->ntxqs; qid++) {
7415 if (sc->qid2tap[qid] == NULL)
7418 if (qid == sc->ntxqs) {
7419 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: not free aggregation queue\n",
7423 tap->txa_private = malloc(sizeof(int), M_DEVBUF, M_NOWAIT);
7424 if (tap->txa_private == NULL) {
7425 device_printf(sc->sc_dev,
7426 "%s: failed to alloc TX aggregation structure\n", __func__);
7429 sc->qid2tap[qid] = tap;
7430 *(int *)tap->txa_private = qid;
7431 return sc->sc_addba_request(ni, tap, dialogtoken, baparamset,
7436 iwn_addba_response(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap,
7437 int code, int baparamset, int batimeout)
7439 struct iwn_softc *sc = ni->ni_ic->ic_softc;
7440 int qid = *(int *)tap->txa_private;
7441 uint8_t tid = tap->txa_tid;
7444 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
7446 if (code == IEEE80211_STATUS_SUCCESS) {
7447 ni->ni_txseqs[tid] = tap->txa_start & 0xfff;
7448 ret = iwn_ampdu_tx_start(ni->ni_ic, ni, tid);
7452 sc->qid2tap[qid] = NULL;
7453 free(tap->txa_private, M_DEVBUF);
7454 tap->txa_private = NULL;
7456 return sc->sc_addba_response(ni, tap, code, baparamset, batimeout);
7460 * This function is called by upper layer when an ADDBA response is received
7464 iwn_ampdu_tx_start(struct ieee80211com *ic, struct ieee80211_node *ni,
7467 struct ieee80211_tx_ampdu *tap = &ni->ni_tx_ampdu[tid];
7468 struct iwn_softc *sc = ni->ni_ic->ic_softc;
7469 struct iwn_ops *ops = &sc->ops;
7470 struct iwn_node *wn = (void *)ni;
7471 struct iwn_node_info node;
7474 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
7476 /* Enable TX for the specified RA/TID. */
7477 wn->disable_tid &= ~(1 << tid);
7478 memset(&node, 0, sizeof node);
7480 node.control = IWN_NODE_UPDATE;
7481 node.flags = IWN_FLAG_SET_DISABLE_TID;
7482 node.disable_tid = htole16(wn->disable_tid);
7483 error = ops->add_node(sc, &node, 1);
7487 if ((error = iwn_nic_lock(sc)) != 0)
7489 qid = *(int *)tap->txa_private;
7490 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: ra=%d tid=%d ssn=%d qid=%d\n",
7491 __func__, wn->id, tid, tap->txa_start, qid);
7492 ops->ampdu_tx_start(sc, ni, qid, tid, tap->txa_start & 0xfff);
7495 iwn_set_link_quality(sc, ni);
7500 iwn_ampdu_tx_stop(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap)
7502 struct iwn_softc *sc = ni->ni_ic->ic_softc;
7503 struct iwn_ops *ops = &sc->ops;
7504 uint8_t tid = tap->txa_tid;
7507 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
7509 sc->sc_addba_stop(ni, tap);
7511 if (tap->txa_private == NULL)
7514 qid = *(int *)tap->txa_private;
7515 if (sc->txq[qid].queued != 0)
7517 if (iwn_nic_lock(sc) != 0)
7519 ops->ampdu_tx_stop(sc, qid, tid, tap->txa_start & 0xfff);
7521 sc->qid2tap[qid] = NULL;
7522 free(tap->txa_private, M_DEVBUF);
7523 tap->txa_private = NULL;
7527 iwn4965_ampdu_tx_start(struct iwn_softc *sc, struct ieee80211_node *ni,
7528 int qid, uint8_t tid, uint16_t ssn)
7530 struct iwn_node *wn = (void *)ni;
7532 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
7534 /* Stop TX scheduler while we're changing its configuration. */
7535 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_STATUS(qid),
7536 IWN4965_TXQ_STATUS_CHGACT);
7538 /* Assign RA/TID translation to the queue. */
7539 iwn_mem_write_2(sc, sc->sched_base + IWN4965_SCHED_TRANS_TBL(qid),
7542 /* Enable chain-building mode for the queue. */
7543 iwn_prph_setbits(sc, IWN4965_SCHED_QCHAIN_SEL, 1 << qid);
7545 /* Set starting sequence number from the ADDBA request. */
7546 sc->txq[qid].cur = sc->txq[qid].read = (ssn & 0xff);
7547 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | (ssn & 0xff));
7548 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_RDPTR(qid), ssn);
7550 /* Set scheduler window size. */
7551 iwn_mem_write(sc, sc->sched_base + IWN4965_SCHED_QUEUE_OFFSET(qid),
7553 /* Set scheduler frame limit. */
7554 iwn_mem_write(sc, sc->sched_base + IWN4965_SCHED_QUEUE_OFFSET(qid) + 4,
7555 IWN_SCHED_LIMIT << 16);
7557 /* Enable interrupts for the queue. */
7558 iwn_prph_setbits(sc, IWN4965_SCHED_INTR_MASK, 1 << qid);
7560 /* Mark the queue as active. */
7561 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_STATUS(qid),
7562 IWN4965_TXQ_STATUS_ACTIVE | IWN4965_TXQ_STATUS_AGGR_ENA |
7563 iwn_tid2fifo[tid] << 1);
7567 iwn4965_ampdu_tx_stop(struct iwn_softc *sc, int qid, uint8_t tid, uint16_t ssn)
7569 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
7571 /* Stop TX scheduler while we're changing its configuration. */
7572 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_STATUS(qid),
7573 IWN4965_TXQ_STATUS_CHGACT);
7575 /* Set starting sequence number from the ADDBA request. */
7576 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | (ssn & 0xff));
7577 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_RDPTR(qid), ssn);
7579 /* Disable interrupts for the queue. */
7580 iwn_prph_clrbits(sc, IWN4965_SCHED_INTR_MASK, 1 << qid);
7582 /* Mark the queue as inactive. */
7583 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_STATUS(qid),
7584 IWN4965_TXQ_STATUS_INACTIVE | iwn_tid2fifo[tid] << 1);
7588 iwn5000_ampdu_tx_start(struct iwn_softc *sc, struct ieee80211_node *ni,
7589 int qid, uint8_t tid, uint16_t ssn)
7591 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
7593 struct iwn_node *wn = (void *)ni;
7595 /* Stop TX scheduler while we're changing its configuration. */
7596 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_STATUS(qid),
7597 IWN5000_TXQ_STATUS_CHGACT);
7599 /* Assign RA/TID translation to the queue. */
7600 iwn_mem_write_2(sc, sc->sched_base + IWN5000_SCHED_TRANS_TBL(qid),
7603 /* Enable chain-building mode for the queue. */
7604 iwn_prph_setbits(sc, IWN5000_SCHED_QCHAIN_SEL, 1 << qid);
7606 /* Enable aggregation for the queue. */
7607 iwn_prph_setbits(sc, IWN5000_SCHED_AGGR_SEL, 1 << qid);
7609 /* Set starting sequence number from the ADDBA request. */
7610 sc->txq[qid].cur = sc->txq[qid].read = (ssn & 0xff);
7611 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | (ssn & 0xff));
7612 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_RDPTR(qid), ssn);
7614 /* Set scheduler window size and frame limit. */
7615 iwn_mem_write(sc, sc->sched_base + IWN5000_SCHED_QUEUE_OFFSET(qid) + 4,
7616 IWN_SCHED_LIMIT << 16 | IWN_SCHED_WINSZ);
7618 /* Enable interrupts for the queue. */
7619 iwn_prph_setbits(sc, IWN5000_SCHED_INTR_MASK, 1 << qid);
7621 /* Mark the queue as active. */
7622 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_STATUS(qid),
7623 IWN5000_TXQ_STATUS_ACTIVE | iwn_tid2fifo[tid]);
7627 iwn5000_ampdu_tx_stop(struct iwn_softc *sc, int qid, uint8_t tid, uint16_t ssn)
7629 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
7631 /* Stop TX scheduler while we're changing its configuration. */
7632 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_STATUS(qid),
7633 IWN5000_TXQ_STATUS_CHGACT);
7635 /* Disable aggregation for the queue. */
7636 iwn_prph_clrbits(sc, IWN5000_SCHED_AGGR_SEL, 1 << qid);
7638 /* Set starting sequence number from the ADDBA request. */
7639 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | (ssn & 0xff));
7640 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_RDPTR(qid), ssn);
7642 /* Disable interrupts for the queue. */
7643 iwn_prph_clrbits(sc, IWN5000_SCHED_INTR_MASK, 1 << qid);
7645 /* Mark the queue as inactive. */
7646 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_STATUS(qid),
7647 IWN5000_TXQ_STATUS_INACTIVE | iwn_tid2fifo[tid]);
7651 * Query calibration tables from the initialization firmware. We do this
7652 * only once at first boot. Called from a process context.
7655 iwn5000_query_calibration(struct iwn_softc *sc)
7657 struct iwn5000_calib_config cmd;
7660 memset(&cmd, 0, sizeof cmd);
7661 cmd.ucode.once.enable = htole32(0xffffffff);
7662 cmd.ucode.once.start = htole32(0xffffffff);
7663 cmd.ucode.once.send = htole32(0xffffffff);
7664 cmd.ucode.flags = htole32(0xffffffff);
7665 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "%s: sending calibration query\n",
7667 error = iwn_cmd(sc, IWN5000_CMD_CALIB_CONFIG, &cmd, sizeof cmd, 0);
7671 /* Wait at most two seconds for calibration to complete. */
7672 if (!(sc->sc_flags & IWN_FLAG_CALIB_DONE))
7673 error = msleep(sc, &sc->sc_mtx, PCATCH, "iwncal", 2 * hz);
7678 * Send calibration results to the runtime firmware. These results were
7679 * obtained on first boot from the initialization firmware.
7682 iwn5000_send_calibration(struct iwn_softc *sc)
7686 for (idx = 0; idx < IWN5000_PHY_CALIB_MAX_RESULT; idx++) {
7687 if (!(sc->base_params->calib_need & (1<<idx))) {
7688 DPRINTF(sc, IWN_DEBUG_CALIBRATE,
7689 "No need of calib %d\n",
7691 continue; /* no need for this calib */
7693 if (sc->calibcmd[idx].buf == NULL) {
7694 DPRINTF(sc, IWN_DEBUG_CALIBRATE,
7695 "Need calib idx : %d but no available data\n",
7700 DPRINTF(sc, IWN_DEBUG_CALIBRATE,
7701 "send calibration result idx=%d len=%d\n", idx,
7702 sc->calibcmd[idx].len);
7703 error = iwn_cmd(sc, IWN_CMD_PHY_CALIB, sc->calibcmd[idx].buf,
7704 sc->calibcmd[idx].len, 0);
7706 device_printf(sc->sc_dev,
7707 "%s: could not send calibration result, error %d\n",
7716 iwn5000_send_wimax_coex(struct iwn_softc *sc)
7718 struct iwn5000_wimax_coex wimax;
7721 if (sc->hw_type == IWN_HW_REV_TYPE_6050) {
7722 /* Enable WiMAX coexistence for combo adapters. */
7724 IWN_WIMAX_COEX_ASSOC_WA_UNMASK |
7725 IWN_WIMAX_COEX_UNASSOC_WA_UNMASK |
7726 IWN_WIMAX_COEX_STA_TABLE_VALID |
7727 IWN_WIMAX_COEX_ENABLE;
7728 memcpy(wimax.events, iwn6050_wimax_events,
7729 sizeof iwn6050_wimax_events);
7733 /* Disable WiMAX coexistence. */
7735 memset(wimax.events, 0, sizeof wimax.events);
7737 DPRINTF(sc, IWN_DEBUG_RESET, "%s: Configuring WiMAX coexistence\n",
7739 return iwn_cmd(sc, IWN5000_CMD_WIMAX_COEX, &wimax, sizeof wimax, 0);
7743 iwn5000_crystal_calib(struct iwn_softc *sc)
7745 struct iwn5000_phy_calib_crystal cmd;
7747 memset(&cmd, 0, sizeof cmd);
7748 cmd.code = IWN5000_PHY_CALIB_CRYSTAL;
7751 cmd.cap_pin[0] = le32toh(sc->eeprom_crystal) & 0xff;
7752 cmd.cap_pin[1] = (le32toh(sc->eeprom_crystal) >> 16) & 0xff;
7753 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "sending crystal calibration %d, %d\n",
7754 cmd.cap_pin[0], cmd.cap_pin[1]);
7755 return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 0);
7759 iwn5000_temp_offset_calib(struct iwn_softc *sc)
7761 struct iwn5000_phy_calib_temp_offset cmd;
7763 memset(&cmd, 0, sizeof cmd);
7764 cmd.code = IWN5000_PHY_CALIB_TEMP_OFFSET;
7767 if (sc->eeprom_temp != 0)
7768 cmd.offset = htole16(sc->eeprom_temp);
7770 cmd.offset = htole16(IWN_DEFAULT_TEMP_OFFSET);
7771 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "setting radio sensor offset to %d\n",
7772 le16toh(cmd.offset));
7773 return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 0);
7777 iwn5000_temp_offset_calibv2(struct iwn_softc *sc)
7779 struct iwn5000_phy_calib_temp_offsetv2 cmd;
7781 memset(&cmd, 0, sizeof cmd);
7782 cmd.code = IWN5000_PHY_CALIB_TEMP_OFFSET;
7785 if (sc->eeprom_temp != 0) {
7786 cmd.offset_low = htole16(sc->eeprom_temp);
7787 cmd.offset_high = htole16(sc->eeprom_temp_high);
7789 cmd.offset_low = htole16(IWN_DEFAULT_TEMP_OFFSET);
7790 cmd.offset_high = htole16(IWN_DEFAULT_TEMP_OFFSET);
7792 cmd.burnt_voltage_ref = htole16(sc->eeprom_voltage);
7794 DPRINTF(sc, IWN_DEBUG_CALIBRATE,
7795 "setting radio sensor low offset to %d, high offset to %d, voltage to %d\n",
7796 le16toh(cmd.offset_low),
7797 le16toh(cmd.offset_high),
7798 le16toh(cmd.burnt_voltage_ref));
7800 return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 0);
7804 * This function is called after the runtime firmware notifies us of its
7805 * readiness (called in a process context).
7808 iwn4965_post_alive(struct iwn_softc *sc)
7812 if ((error = iwn_nic_lock(sc)) != 0)
7815 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
7817 /* Clear TX scheduler state in SRAM. */
7818 sc->sched_base = iwn_prph_read(sc, IWN_SCHED_SRAM_ADDR);
7819 iwn_mem_set_region_4(sc, sc->sched_base + IWN4965_SCHED_CTX_OFF, 0,
7820 IWN4965_SCHED_CTX_LEN / sizeof (uint32_t));
7822 /* Set physical address of TX scheduler rings (1KB aligned). */
7823 iwn_prph_write(sc, IWN4965_SCHED_DRAM_ADDR, sc->sched_dma.paddr >> 10);
7825 IWN_SETBITS(sc, IWN_FH_TX_CHICKEN, IWN_FH_TX_CHICKEN_SCHED_RETRY);
7827 /* Disable chain mode for all our 16 queues. */
7828 iwn_prph_write(sc, IWN4965_SCHED_QCHAIN_SEL, 0);
7830 for (qid = 0; qid < IWN4965_NTXQUEUES; qid++) {
7831 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_RDPTR(qid), 0);
7832 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | 0);
7834 /* Set scheduler window size. */
7835 iwn_mem_write(sc, sc->sched_base +
7836 IWN4965_SCHED_QUEUE_OFFSET(qid), IWN_SCHED_WINSZ);
7837 /* Set scheduler frame limit. */
7838 iwn_mem_write(sc, sc->sched_base +
7839 IWN4965_SCHED_QUEUE_OFFSET(qid) + 4,
7840 IWN_SCHED_LIMIT << 16);
7843 /* Enable interrupts for all our 16 queues. */
7844 iwn_prph_write(sc, IWN4965_SCHED_INTR_MASK, 0xffff);
7845 /* Identify TX FIFO rings (0-7). */
7846 iwn_prph_write(sc, IWN4965_SCHED_TXFACT, 0xff);
7848 /* Mark TX rings (4 EDCA + cmd + 2 HCCA) as active. */
7849 for (qid = 0; qid < 7; qid++) {
7850 static uint8_t qid2fifo[] = { 3, 2, 1, 0, 4, 5, 6 };
7851 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_STATUS(qid),
7852 IWN4965_TXQ_STATUS_ACTIVE | qid2fifo[qid] << 1);
7859 * This function is called after the initialization or runtime firmware
7860 * notifies us of its readiness (called in a process context).
7863 iwn5000_post_alive(struct iwn_softc *sc)
7867 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
7869 /* Switch to using ICT interrupt mode. */
7870 iwn5000_ict_reset(sc);
7872 if ((error = iwn_nic_lock(sc)) != 0){
7873 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end in error\n", __func__);
7877 /* Clear TX scheduler state in SRAM. */
7878 sc->sched_base = iwn_prph_read(sc, IWN_SCHED_SRAM_ADDR);
7879 iwn_mem_set_region_4(sc, sc->sched_base + IWN5000_SCHED_CTX_OFF, 0,
7880 IWN5000_SCHED_CTX_LEN / sizeof (uint32_t));
7882 /* Set physical address of TX scheduler rings (1KB aligned). */
7883 iwn_prph_write(sc, IWN5000_SCHED_DRAM_ADDR, sc->sched_dma.paddr >> 10);
7885 IWN_SETBITS(sc, IWN_FH_TX_CHICKEN, IWN_FH_TX_CHICKEN_SCHED_RETRY);
7887 /* Enable chain mode for all queues, except command queue. */
7888 if (sc->sc_flags & IWN_FLAG_PAN_SUPPORT)
7889 iwn_prph_write(sc, IWN5000_SCHED_QCHAIN_SEL, 0xfffdf);
7891 iwn_prph_write(sc, IWN5000_SCHED_QCHAIN_SEL, 0xfffef);
7892 iwn_prph_write(sc, IWN5000_SCHED_AGGR_SEL, 0);
7894 for (qid = 0; qid < IWN5000_NTXQUEUES; qid++) {
7895 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_RDPTR(qid), 0);
7896 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | 0);
7898 iwn_mem_write(sc, sc->sched_base +
7899 IWN5000_SCHED_QUEUE_OFFSET(qid), 0);
7900 /* Set scheduler window size and frame limit. */
7901 iwn_mem_write(sc, sc->sched_base +
7902 IWN5000_SCHED_QUEUE_OFFSET(qid) + 4,
7903 IWN_SCHED_LIMIT << 16 | IWN_SCHED_WINSZ);
7906 /* Enable interrupts for all our 20 queues. */
7907 iwn_prph_write(sc, IWN5000_SCHED_INTR_MASK, 0xfffff);
7908 /* Identify TX FIFO rings (0-7). */
7909 iwn_prph_write(sc, IWN5000_SCHED_TXFACT, 0xff);
7911 /* Mark TX rings (4 EDCA + cmd + 2 HCCA) as active. */
7912 if (sc->sc_flags & IWN_FLAG_PAN_SUPPORT) {
7913 /* Mark TX rings as active. */
7914 for (qid = 0; qid < 11; qid++) {
7915 static uint8_t qid2fifo[] = { 3, 2, 1, 0, 0, 4, 2, 5, 4, 7, 5 };
7916 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_STATUS(qid),
7917 IWN5000_TXQ_STATUS_ACTIVE | qid2fifo[qid]);
7920 /* Mark TX rings (4 EDCA + cmd + 2 HCCA) as active. */
7921 for (qid = 0; qid < 7; qid++) {
7922 static uint8_t qid2fifo[] = { 3, 2, 1, 0, 7, 5, 6 };
7923 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_STATUS(qid),
7924 IWN5000_TXQ_STATUS_ACTIVE | qid2fifo[qid]);
7929 /* Configure WiMAX coexistence for combo adapters. */
7930 error = iwn5000_send_wimax_coex(sc);
7932 device_printf(sc->sc_dev,
7933 "%s: could not configure WiMAX coexistence, error %d\n",
7937 if (sc->hw_type != IWN_HW_REV_TYPE_5150) {
7938 /* Perform crystal calibration. */
7939 error = iwn5000_crystal_calib(sc);
7941 device_printf(sc->sc_dev,
7942 "%s: crystal calibration failed, error %d\n",
7947 if (!(sc->sc_flags & IWN_FLAG_CALIB_DONE)) {
7948 /* Query calibration from the initialization firmware. */
7949 if ((error = iwn5000_query_calibration(sc)) != 0) {
7950 device_printf(sc->sc_dev,
7951 "%s: could not query calibration, error %d\n",
7956 * We have the calibration results now, reboot with the
7957 * runtime firmware (call ourselves recursively!)
7960 error = iwn_hw_init(sc);
7962 /* Send calibration results to runtime firmware. */
7963 error = iwn5000_send_calibration(sc);
7966 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__);
7972 * The firmware boot code is small and is intended to be copied directly into
7973 * the NIC internal memory (no DMA transfer).
7976 iwn4965_load_bootcode(struct iwn_softc *sc, const uint8_t *ucode, int size)
7980 size /= sizeof (uint32_t);
7982 if ((error = iwn_nic_lock(sc)) != 0)
7985 /* Copy microcode image into NIC memory. */
7986 iwn_prph_write_region_4(sc, IWN_BSM_SRAM_BASE,
7987 (const uint32_t *)ucode, size);
7989 iwn_prph_write(sc, IWN_BSM_WR_MEM_SRC, 0);
7990 iwn_prph_write(sc, IWN_BSM_WR_MEM_DST, IWN_FW_TEXT_BASE);
7991 iwn_prph_write(sc, IWN_BSM_WR_DWCOUNT, size);
7993 /* Start boot load now. */
7994 iwn_prph_write(sc, IWN_BSM_WR_CTRL, IWN_BSM_WR_CTRL_START);
7996 /* Wait for transfer to complete. */
7997 for (ntries = 0; ntries < 1000; ntries++) {
7998 if (!(iwn_prph_read(sc, IWN_BSM_WR_CTRL) &
7999 IWN_BSM_WR_CTRL_START))
8003 if (ntries == 1000) {
8004 device_printf(sc->sc_dev, "%s: could not load boot firmware\n",
8010 /* Enable boot after power up. */
8011 iwn_prph_write(sc, IWN_BSM_WR_CTRL, IWN_BSM_WR_CTRL_START_EN);
8018 iwn4965_load_firmware(struct iwn_softc *sc)
8020 struct iwn_fw_info *fw = &sc->fw;
8021 struct iwn_dma_info *dma = &sc->fw_dma;
8024 /* Copy initialization sections into pre-allocated DMA-safe memory. */
8025 memcpy(dma->vaddr, fw->init.data, fw->init.datasz);
8026 bus_dmamap_sync(dma->tag, dma->map, BUS_DMASYNC_PREWRITE);
8027 memcpy(dma->vaddr + IWN4965_FW_DATA_MAXSZ,
8028 fw->init.text, fw->init.textsz);
8029 bus_dmamap_sync(dma->tag, dma->map, BUS_DMASYNC_PREWRITE);
8031 /* Tell adapter where to find initialization sections. */
8032 if ((error = iwn_nic_lock(sc)) != 0)
8034 iwn_prph_write(sc, IWN_BSM_DRAM_DATA_ADDR, dma->paddr >> 4);
8035 iwn_prph_write(sc, IWN_BSM_DRAM_DATA_SIZE, fw->init.datasz);
8036 iwn_prph_write(sc, IWN_BSM_DRAM_TEXT_ADDR,
8037 (dma->paddr + IWN4965_FW_DATA_MAXSZ) >> 4);
8038 iwn_prph_write(sc, IWN_BSM_DRAM_TEXT_SIZE, fw->init.textsz);
8041 /* Load firmware boot code. */
8042 error = iwn4965_load_bootcode(sc, fw->boot.text, fw->boot.textsz);
8044 device_printf(sc->sc_dev, "%s: could not load boot firmware\n",
8048 /* Now press "execute". */
8049 IWN_WRITE(sc, IWN_RESET, 0);
8051 /* Wait at most one second for first alive notification. */
8052 if ((error = msleep(sc, &sc->sc_mtx, PCATCH, "iwninit", hz)) != 0) {
8053 device_printf(sc->sc_dev,
8054 "%s: timeout waiting for adapter to initialize, error %d\n",
8059 /* Retrieve current temperature for initial TX power calibration. */
8060 sc->rawtemp = sc->ucode_info.temp[3].chan20MHz;
8061 sc->temp = iwn4965_get_temperature(sc);
8063 /* Copy runtime sections into pre-allocated DMA-safe memory. */
8064 memcpy(dma->vaddr, fw->main.data, fw->main.datasz);
8065 bus_dmamap_sync(dma->tag, dma->map, BUS_DMASYNC_PREWRITE);
8066 memcpy(dma->vaddr + IWN4965_FW_DATA_MAXSZ,
8067 fw->main.text, fw->main.textsz);
8068 bus_dmamap_sync(dma->tag, dma->map, BUS_DMASYNC_PREWRITE);
8070 /* Tell adapter where to find runtime sections. */
8071 if ((error = iwn_nic_lock(sc)) != 0)
8073 iwn_prph_write(sc, IWN_BSM_DRAM_DATA_ADDR, dma->paddr >> 4);
8074 iwn_prph_write(sc, IWN_BSM_DRAM_DATA_SIZE, fw->main.datasz);
8075 iwn_prph_write(sc, IWN_BSM_DRAM_TEXT_ADDR,
8076 (dma->paddr + IWN4965_FW_DATA_MAXSZ) >> 4);
8077 iwn_prph_write(sc, IWN_BSM_DRAM_TEXT_SIZE,
8078 IWN_FW_UPDATED | fw->main.textsz);
8085 iwn5000_load_firmware_section(struct iwn_softc *sc, uint32_t dst,
8086 const uint8_t *section, int size)
8088 struct iwn_dma_info *dma = &sc->fw_dma;
8091 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
8093 /* Copy firmware section into pre-allocated DMA-safe memory. */
8094 memcpy(dma->vaddr, section, size);
8095 bus_dmamap_sync(dma->tag, dma->map, BUS_DMASYNC_PREWRITE);
8097 if ((error = iwn_nic_lock(sc)) != 0)
8100 IWN_WRITE(sc, IWN_FH_TX_CONFIG(IWN_SRVC_DMACHNL),
8101 IWN_FH_TX_CONFIG_DMA_PAUSE);
8103 IWN_WRITE(sc, IWN_FH_SRAM_ADDR(IWN_SRVC_DMACHNL), dst);
8104 IWN_WRITE(sc, IWN_FH_TFBD_CTRL0(IWN_SRVC_DMACHNL),
8105 IWN_LOADDR(dma->paddr));
8106 IWN_WRITE(sc, IWN_FH_TFBD_CTRL1(IWN_SRVC_DMACHNL),
8107 IWN_HIADDR(dma->paddr) << 28 | size);
8108 IWN_WRITE(sc, IWN_FH_TXBUF_STATUS(IWN_SRVC_DMACHNL),
8109 IWN_FH_TXBUF_STATUS_TBNUM(1) |
8110 IWN_FH_TXBUF_STATUS_TBIDX(1) |
8111 IWN_FH_TXBUF_STATUS_TFBD_VALID);
8113 /* Kick Flow Handler to start DMA transfer. */
8114 IWN_WRITE(sc, IWN_FH_TX_CONFIG(IWN_SRVC_DMACHNL),
8115 IWN_FH_TX_CONFIG_DMA_ENA | IWN_FH_TX_CONFIG_CIRQ_HOST_ENDTFD);
8119 /* Wait at most five seconds for FH DMA transfer to complete. */
8120 return msleep(sc, &sc->sc_mtx, PCATCH, "iwninit", 5 * hz);
8124 iwn5000_load_firmware(struct iwn_softc *sc)
8126 struct iwn_fw_part *fw;
8129 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
8131 /* Load the initialization firmware on first boot only. */
8132 fw = (sc->sc_flags & IWN_FLAG_CALIB_DONE) ?
8133 &sc->fw.main : &sc->fw.init;
8135 error = iwn5000_load_firmware_section(sc, IWN_FW_TEXT_BASE,
8136 fw->text, fw->textsz);
8138 device_printf(sc->sc_dev,
8139 "%s: could not load firmware %s section, error %d\n",
8140 __func__, ".text", error);
8143 error = iwn5000_load_firmware_section(sc, IWN_FW_DATA_BASE,
8144 fw->data, fw->datasz);
8146 device_printf(sc->sc_dev,
8147 "%s: could not load firmware %s section, error %d\n",
8148 __func__, ".data", error);
8152 /* Now press "execute". */
8153 IWN_WRITE(sc, IWN_RESET, 0);
8158 * Extract text and data sections from a legacy firmware image.
8161 iwn_read_firmware_leg(struct iwn_softc *sc, struct iwn_fw_info *fw)
8163 const uint32_t *ptr;
8167 ptr = (const uint32_t *)fw->data;
8168 rev = le32toh(*ptr++);
8170 sc->ucode_rev = rev;
8172 /* Check firmware API version. */
8173 if (IWN_FW_API(rev) <= 1) {
8174 device_printf(sc->sc_dev,
8175 "%s: bad firmware, need API version >=2\n", __func__);
8178 if (IWN_FW_API(rev) >= 3) {
8179 /* Skip build number (version 2 header). */
8183 if (fw->size < hdrlen) {
8184 device_printf(sc->sc_dev, "%s: firmware too short: %zu bytes\n",
8185 __func__, fw->size);
8188 fw->main.textsz = le32toh(*ptr++);
8189 fw->main.datasz = le32toh(*ptr++);
8190 fw->init.textsz = le32toh(*ptr++);
8191 fw->init.datasz = le32toh(*ptr++);
8192 fw->boot.textsz = le32toh(*ptr++);
8194 /* Check that all firmware sections fit. */
8195 if (fw->size < hdrlen + fw->main.textsz + fw->main.datasz +
8196 fw->init.textsz + fw->init.datasz + fw->boot.textsz) {
8197 device_printf(sc->sc_dev, "%s: firmware too short: %zu bytes\n",
8198 __func__, fw->size);
8202 /* Get pointers to firmware sections. */
8203 fw->main.text = (const uint8_t *)ptr;
8204 fw->main.data = fw->main.text + fw->main.textsz;
8205 fw->init.text = fw->main.data + fw->main.datasz;
8206 fw->init.data = fw->init.text + fw->init.textsz;
8207 fw->boot.text = fw->init.data + fw->init.datasz;
8212 * Extract text and data sections from a TLV firmware image.
8215 iwn_read_firmware_tlv(struct iwn_softc *sc, struct iwn_fw_info *fw,
8218 const struct iwn_fw_tlv_hdr *hdr;
8219 const struct iwn_fw_tlv *tlv;
8220 const uint8_t *ptr, *end;
8224 if (fw->size < sizeof (*hdr)) {
8225 device_printf(sc->sc_dev, "%s: firmware too short: %zu bytes\n",
8226 __func__, fw->size);
8229 hdr = (const struct iwn_fw_tlv_hdr *)fw->data;
8230 if (hdr->signature != htole32(IWN_FW_SIGNATURE)) {
8231 device_printf(sc->sc_dev, "%s: bad firmware signature 0x%08x\n",
8232 __func__, le32toh(hdr->signature));
8235 DPRINTF(sc, IWN_DEBUG_RESET, "FW: \"%.64s\", build 0x%x\n", hdr->descr,
8236 le32toh(hdr->build));
8237 sc->ucode_rev = le32toh(hdr->rev);
8240 * Select the closest supported alternative that is less than
8241 * or equal to the specified one.
8243 altmask = le64toh(hdr->altmask);
8244 while (alt > 0 && !(altmask & (1ULL << alt)))
8245 alt--; /* Downgrade. */
8246 DPRINTF(sc, IWN_DEBUG_RESET, "using alternative %d\n", alt);
8248 ptr = (const uint8_t *)(hdr + 1);
8249 end = (const uint8_t *)(fw->data + fw->size);
8251 /* Parse type-length-value fields. */
8252 while (ptr + sizeof (*tlv) <= end) {
8253 tlv = (const struct iwn_fw_tlv *)ptr;
8254 len = le32toh(tlv->len);
8256 ptr += sizeof (*tlv);
8257 if (ptr + len > end) {
8258 device_printf(sc->sc_dev,
8259 "%s: firmware too short: %zu bytes\n", __func__,
8263 /* Skip other alternatives. */
8264 if (tlv->alt != 0 && tlv->alt != htole16(alt))
8267 switch (le16toh(tlv->type)) {
8268 case IWN_FW_TLV_MAIN_TEXT:
8269 fw->main.text = ptr;
8270 fw->main.textsz = len;
8272 case IWN_FW_TLV_MAIN_DATA:
8273 fw->main.data = ptr;
8274 fw->main.datasz = len;
8276 case IWN_FW_TLV_INIT_TEXT:
8277 fw->init.text = ptr;
8278 fw->init.textsz = len;
8280 case IWN_FW_TLV_INIT_DATA:
8281 fw->init.data = ptr;
8282 fw->init.datasz = len;
8284 case IWN_FW_TLV_BOOT_TEXT:
8285 fw->boot.text = ptr;
8286 fw->boot.textsz = len;
8288 case IWN_FW_TLV_ENH_SENS:
8290 sc->sc_flags |= IWN_FLAG_ENH_SENS;
8292 case IWN_FW_TLV_PHY_CALIB:
8293 tmp = le32toh(*ptr);
8295 sc->reset_noise_gain = tmp;
8296 sc->noise_gain = tmp + 1;
8299 case IWN_FW_TLV_PAN:
8300 sc->sc_flags |= IWN_FLAG_PAN_SUPPORT;
8301 DPRINTF(sc, IWN_DEBUG_RESET,
8302 "PAN Support found: %d\n", 1);
8304 case IWN_FW_TLV_FLAGS:
8305 if (len < sizeof(uint32_t))
8307 if (len % sizeof(uint32_t))
8309 sc->tlv_feature_flags = le32toh(*ptr);
8310 DPRINTF(sc, IWN_DEBUG_RESET,
8311 "%s: feature: 0x%08x\n",
8313 sc->tlv_feature_flags);
8315 case IWN_FW_TLV_PBREQ_MAXLEN:
8316 case IWN_FW_TLV_RUNT_EVTLOG_PTR:
8317 case IWN_FW_TLV_RUNT_EVTLOG_SIZE:
8318 case IWN_FW_TLV_RUNT_ERRLOG_PTR:
8319 case IWN_FW_TLV_INIT_EVTLOG_PTR:
8320 case IWN_FW_TLV_INIT_EVTLOG_SIZE:
8321 case IWN_FW_TLV_INIT_ERRLOG_PTR:
8322 case IWN_FW_TLV_WOWLAN_INST:
8323 case IWN_FW_TLV_WOWLAN_DATA:
8324 DPRINTF(sc, IWN_DEBUG_RESET,
8325 "TLV type %d recognized but not handled\n",
8326 le16toh(tlv->type));
8329 DPRINTF(sc, IWN_DEBUG_RESET,
8330 "TLV type %d not handled\n", le16toh(tlv->type));
8333 next: /* TLV fields are 32-bit aligned. */
8334 ptr += (len + 3) & ~3;
8340 iwn_read_firmware(struct iwn_softc *sc)
8342 struct iwn_fw_info *fw = &sc->fw;
8345 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
8349 memset(fw, 0, sizeof (*fw));
8351 /* Read firmware image from filesystem. */
8352 sc->fw_fp = firmware_get(sc->fwname);
8353 if (sc->fw_fp == NULL) {
8354 device_printf(sc->sc_dev, "%s: could not read firmware %s\n",
8355 __func__, sc->fwname);
8361 fw->size = sc->fw_fp->datasize;
8362 fw->data = (const uint8_t *)sc->fw_fp->data;
8363 if (fw->size < sizeof (uint32_t)) {
8364 device_printf(sc->sc_dev, "%s: firmware too short: %zu bytes\n",
8365 __func__, fw->size);
8370 /* Retrieve text and data sections. */
8371 if (*(const uint32_t *)fw->data != 0) /* Legacy image. */
8372 error = iwn_read_firmware_leg(sc, fw);
8374 error = iwn_read_firmware_tlv(sc, fw, 1);
8376 device_printf(sc->sc_dev,
8377 "%s: could not read firmware sections, error %d\n",
8382 device_printf(sc->sc_dev, "%s: ucode rev=0x%08x\n", __func__, sc->ucode_rev);
8384 /* Make sure text and data sections fit in hardware memory. */
8385 if (fw->main.textsz > sc->fw_text_maxsz ||
8386 fw->main.datasz > sc->fw_data_maxsz ||
8387 fw->init.textsz > sc->fw_text_maxsz ||
8388 fw->init.datasz > sc->fw_data_maxsz ||
8389 fw->boot.textsz > IWN_FW_BOOT_TEXT_MAXSZ ||
8390 (fw->boot.textsz & 3) != 0) {
8391 device_printf(sc->sc_dev, "%s: firmware sections too large\n",
8397 /* We can proceed with loading the firmware. */
8400 fail: iwn_unload_firmware(sc);
8405 iwn_unload_firmware(struct iwn_softc *sc)
8407 firmware_put(sc->fw_fp, FIRMWARE_UNLOAD);
8412 iwn_clock_wait(struct iwn_softc *sc)
8416 /* Set "initialization complete" bit. */
8417 IWN_SETBITS(sc, IWN_GP_CNTRL, IWN_GP_CNTRL_INIT_DONE);
8419 /* Wait for clock stabilization. */
8420 for (ntries = 0; ntries < 2500; ntries++) {
8421 if (IWN_READ(sc, IWN_GP_CNTRL) & IWN_GP_CNTRL_MAC_CLOCK_READY)
8425 device_printf(sc->sc_dev,
8426 "%s: timeout waiting for clock stabilization\n", __func__);
8431 iwn_apm_init(struct iwn_softc *sc)
8436 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
8438 /* Disable L0s exit timer (NMI bug workaround). */
8439 IWN_SETBITS(sc, IWN_GIO_CHICKEN, IWN_GIO_CHICKEN_DIS_L0S_TIMER);
8440 /* Don't wait for ICH L0s (ICH bug workaround). */
8441 IWN_SETBITS(sc, IWN_GIO_CHICKEN, IWN_GIO_CHICKEN_L1A_NO_L0S_RX);
8443 /* Set FH wait threshold to max (HW bug under stress workaround). */
8444 IWN_SETBITS(sc, IWN_DBG_HPET_MEM, 0xffff0000);
8446 /* Enable HAP INTA to move adapter from L1a to L0s. */
8447 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, IWN_HW_IF_CONFIG_HAP_WAKE_L1A);
8449 /* Retrieve PCIe Active State Power Management (ASPM). */
8450 reg = pci_read_config(sc->sc_dev, sc->sc_cap_off + PCIER_LINK_CTL, 4);
8451 /* Workaround for HW instability in PCIe L0->L0s->L1 transition. */
8452 if (reg & PCIEM_LINK_CTL_ASPMC_L1) /* L1 Entry enabled. */
8453 IWN_SETBITS(sc, IWN_GIO, IWN_GIO_L0S_ENA);
8455 IWN_CLRBITS(sc, IWN_GIO, IWN_GIO_L0S_ENA);
8457 if (sc->base_params->pll_cfg_val)
8458 IWN_SETBITS(sc, IWN_ANA_PLL, sc->base_params->pll_cfg_val);
8460 /* Wait for clock stabilization before accessing prph. */
8461 if ((error = iwn_clock_wait(sc)) != 0)
8464 if ((error = iwn_nic_lock(sc)) != 0)
8466 if (sc->hw_type == IWN_HW_REV_TYPE_4965) {
8467 /* Enable DMA and BSM (Bootstrap State Machine). */
8468 iwn_prph_write(sc, IWN_APMG_CLK_EN,
8469 IWN_APMG_CLK_CTRL_DMA_CLK_RQT |
8470 IWN_APMG_CLK_CTRL_BSM_CLK_RQT);
8473 iwn_prph_write(sc, IWN_APMG_CLK_EN,
8474 IWN_APMG_CLK_CTRL_DMA_CLK_RQT);
8477 /* Disable L1-Active. */
8478 iwn_prph_setbits(sc, IWN_APMG_PCI_STT, IWN_APMG_PCI_STT_L1A_DIS);
8485 iwn_apm_stop_master(struct iwn_softc *sc)
8489 /* Stop busmaster DMA activity. */
8490 IWN_SETBITS(sc, IWN_RESET, IWN_RESET_STOP_MASTER);
8491 for (ntries = 0; ntries < 100; ntries++) {
8492 if (IWN_READ(sc, IWN_RESET) & IWN_RESET_MASTER_DISABLED)
8496 device_printf(sc->sc_dev, "%s: timeout waiting for master\n", __func__);
8500 iwn_apm_stop(struct iwn_softc *sc)
8502 iwn_apm_stop_master(sc);
8504 /* Reset the entire device. */
8505 IWN_SETBITS(sc, IWN_RESET, IWN_RESET_SW);
8507 /* Clear "initialization complete" bit. */
8508 IWN_CLRBITS(sc, IWN_GP_CNTRL, IWN_GP_CNTRL_INIT_DONE);
8512 iwn4965_nic_config(struct iwn_softc *sc)
8514 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
8516 if (IWN_RFCFG_TYPE(sc->rfcfg) == 1) {
8518 * I don't believe this to be correct but this is what the
8519 * vendor driver is doing. Probably the bits should not be
8520 * shifted in IWN_RFCFG_*.
8522 IWN_SETBITS(sc, IWN_HW_IF_CONFIG,
8523 IWN_RFCFG_TYPE(sc->rfcfg) |
8524 IWN_RFCFG_STEP(sc->rfcfg) |
8525 IWN_RFCFG_DASH(sc->rfcfg));
8527 IWN_SETBITS(sc, IWN_HW_IF_CONFIG,
8528 IWN_HW_IF_CONFIG_RADIO_SI | IWN_HW_IF_CONFIG_MAC_SI);
8533 iwn5000_nic_config(struct iwn_softc *sc)
8538 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
8540 if (IWN_RFCFG_TYPE(sc->rfcfg) < 3) {
8541 IWN_SETBITS(sc, IWN_HW_IF_CONFIG,
8542 IWN_RFCFG_TYPE(sc->rfcfg) |
8543 IWN_RFCFG_STEP(sc->rfcfg) |
8544 IWN_RFCFG_DASH(sc->rfcfg));
8546 IWN_SETBITS(sc, IWN_HW_IF_CONFIG,
8547 IWN_HW_IF_CONFIG_RADIO_SI | IWN_HW_IF_CONFIG_MAC_SI);
8549 if ((error = iwn_nic_lock(sc)) != 0)
8551 iwn_prph_setbits(sc, IWN_APMG_PS, IWN_APMG_PS_EARLY_PWROFF_DIS);
8553 if (sc->hw_type == IWN_HW_REV_TYPE_1000) {
8555 * Select first Switching Voltage Regulator (1.32V) to
8556 * solve a stability issue related to noisy DC2DC line
8557 * in the silicon of 1000 Series.
8559 tmp = iwn_prph_read(sc, IWN_APMG_DIGITAL_SVR);
8560 tmp &= ~IWN_APMG_DIGITAL_SVR_VOLTAGE_MASK;
8561 tmp |= IWN_APMG_DIGITAL_SVR_VOLTAGE_1_32;
8562 iwn_prph_write(sc, IWN_APMG_DIGITAL_SVR, tmp);
8566 if (sc->sc_flags & IWN_FLAG_INTERNAL_PA) {
8567 /* Use internal power amplifier only. */
8568 IWN_WRITE(sc, IWN_GP_DRIVER, IWN_GP_DRIVER_RADIO_2X2_IPA);
8570 if (sc->base_params->additional_nic_config && sc->calib_ver >= 6) {
8571 /* Indicate that ROM calibration version is >=6. */
8572 IWN_SETBITS(sc, IWN_GP_DRIVER, IWN_GP_DRIVER_CALIB_VER6);
8574 if (sc->base_params->additional_gp_drv_bit)
8575 IWN_SETBITS(sc, IWN_GP_DRIVER,
8576 sc->base_params->additional_gp_drv_bit);
8581 * Take NIC ownership over Intel Active Management Technology (AMT).
8584 iwn_hw_prepare(struct iwn_softc *sc)
8588 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
8590 /* Check if hardware is ready. */
8591 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, IWN_HW_IF_CONFIG_NIC_READY);
8592 for (ntries = 0; ntries < 5; ntries++) {
8593 if (IWN_READ(sc, IWN_HW_IF_CONFIG) &
8594 IWN_HW_IF_CONFIG_NIC_READY)
8599 /* Hardware not ready, force into ready state. */
8600 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, IWN_HW_IF_CONFIG_PREPARE);
8601 for (ntries = 0; ntries < 15000; ntries++) {
8602 if (!(IWN_READ(sc, IWN_HW_IF_CONFIG) &
8603 IWN_HW_IF_CONFIG_PREPARE_DONE))
8607 if (ntries == 15000)
8610 /* Hardware should be ready now. */
8611 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, IWN_HW_IF_CONFIG_NIC_READY);
8612 for (ntries = 0; ntries < 5; ntries++) {
8613 if (IWN_READ(sc, IWN_HW_IF_CONFIG) &
8614 IWN_HW_IF_CONFIG_NIC_READY)
8622 iwn_hw_init(struct iwn_softc *sc)
8624 struct iwn_ops *ops = &sc->ops;
8625 int error, chnl, qid;
8627 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
8629 /* Clear pending interrupts. */
8630 IWN_WRITE(sc, IWN_INT, 0xffffffff);
8632 if ((error = iwn_apm_init(sc)) != 0) {
8633 device_printf(sc->sc_dev,
8634 "%s: could not power ON adapter, error %d\n", __func__,
8639 /* Select VMAIN power source. */
8640 if ((error = iwn_nic_lock(sc)) != 0)
8642 iwn_prph_clrbits(sc, IWN_APMG_PS, IWN_APMG_PS_PWR_SRC_MASK);
8645 /* Perform adapter-specific initialization. */
8646 if ((error = ops->nic_config(sc)) != 0)
8649 /* Initialize RX ring. */
8650 if ((error = iwn_nic_lock(sc)) != 0)
8652 IWN_WRITE(sc, IWN_FH_RX_CONFIG, 0);
8653 IWN_WRITE(sc, IWN_FH_RX_WPTR, 0);
8654 /* Set physical address of RX ring (256-byte aligned). */
8655 IWN_WRITE(sc, IWN_FH_RX_BASE, sc->rxq.desc_dma.paddr >> 8);
8656 /* Set physical address of RX status (16-byte aligned). */
8657 IWN_WRITE(sc, IWN_FH_STATUS_WPTR, sc->rxq.stat_dma.paddr >> 4);
8659 IWN_WRITE(sc, IWN_FH_RX_CONFIG,
8660 IWN_FH_RX_CONFIG_ENA |
8661 IWN_FH_RX_CONFIG_IGN_RXF_EMPTY | /* HW bug workaround */
8662 IWN_FH_RX_CONFIG_IRQ_DST_HOST |
8663 IWN_FH_RX_CONFIG_SINGLE_FRAME |
8664 IWN_FH_RX_CONFIG_RB_TIMEOUT(0) |
8665 IWN_FH_RX_CONFIG_NRBD(IWN_RX_RING_COUNT_LOG));
8667 IWN_WRITE(sc, IWN_FH_RX_WPTR, (IWN_RX_RING_COUNT - 1) & ~7);
8669 if ((error = iwn_nic_lock(sc)) != 0)
8672 /* Initialize TX scheduler. */
8673 iwn_prph_write(sc, sc->sched_txfact_addr, 0);
8675 /* Set physical address of "keep warm" page (16-byte aligned). */
8676 IWN_WRITE(sc, IWN_FH_KW_ADDR, sc->kw_dma.paddr >> 4);
8678 /* Initialize TX rings. */
8679 for (qid = 0; qid < sc->ntxqs; qid++) {
8680 struct iwn_tx_ring *txq = &sc->txq[qid];
8682 /* Set physical address of TX ring (256-byte aligned). */
8683 IWN_WRITE(sc, IWN_FH_CBBC_QUEUE(qid),
8684 txq->desc_dma.paddr >> 8);
8688 /* Enable DMA channels. */
8689 for (chnl = 0; chnl < sc->ndmachnls; chnl++) {
8690 IWN_WRITE(sc, IWN_FH_TX_CONFIG(chnl),
8691 IWN_FH_TX_CONFIG_DMA_ENA |
8692 IWN_FH_TX_CONFIG_DMA_CREDIT_ENA);
8695 /* Clear "radio off" and "commands blocked" bits. */
8696 IWN_WRITE(sc, IWN_UCODE_GP1_CLR, IWN_UCODE_GP1_RFKILL);
8697 IWN_WRITE(sc, IWN_UCODE_GP1_CLR, IWN_UCODE_GP1_CMD_BLOCKED);
8699 /* Clear pending interrupts. */
8700 IWN_WRITE(sc, IWN_INT, 0xffffffff);
8701 /* Enable interrupt coalescing. */
8702 IWN_WRITE(sc, IWN_INT_COALESCING, 512 / 8);
8703 /* Enable interrupts. */
8704 IWN_WRITE(sc, IWN_INT_MASK, sc->int_mask);
8706 /* _Really_ make sure "radio off" bit is cleared! */
8707 IWN_WRITE(sc, IWN_UCODE_GP1_CLR, IWN_UCODE_GP1_RFKILL);
8708 IWN_WRITE(sc, IWN_UCODE_GP1_CLR, IWN_UCODE_GP1_RFKILL);
8710 /* Enable shadow registers. */
8711 if (sc->base_params->shadow_reg_enable)
8712 IWN_SETBITS(sc, IWN_SHADOW_REG_CTRL, 0x800fffff);
8714 if ((error = ops->load_firmware(sc)) != 0) {
8715 device_printf(sc->sc_dev,
8716 "%s: could not load firmware, error %d\n", __func__,
8720 /* Wait at most one second for firmware alive notification. */
8721 if ((error = msleep(sc, &sc->sc_mtx, PCATCH, "iwninit", hz)) != 0) {
8722 device_printf(sc->sc_dev,
8723 "%s: timeout waiting for adapter to initialize, error %d\n",
8727 /* Do post-firmware initialization. */
8729 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__);
8731 return ops->post_alive(sc);
8735 iwn_hw_stop(struct iwn_softc *sc)
8737 int chnl, qid, ntries;
8739 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
8741 IWN_WRITE(sc, IWN_RESET, IWN_RESET_NEVO);
8743 /* Disable interrupts. */
8744 IWN_WRITE(sc, IWN_INT_MASK, 0);
8745 IWN_WRITE(sc, IWN_INT, 0xffffffff);
8746 IWN_WRITE(sc, IWN_FH_INT, 0xffffffff);
8747 sc->sc_flags &= ~IWN_FLAG_USE_ICT;
8749 /* Make sure we no longer hold the NIC lock. */
8752 /* Stop TX scheduler. */
8753 iwn_prph_write(sc, sc->sched_txfact_addr, 0);
8755 /* Stop all DMA channels. */
8756 if (iwn_nic_lock(sc) == 0) {
8757 for (chnl = 0; chnl < sc->ndmachnls; chnl++) {
8758 IWN_WRITE(sc, IWN_FH_TX_CONFIG(chnl), 0);
8759 for (ntries = 0; ntries < 200; ntries++) {
8760 if (IWN_READ(sc, IWN_FH_TX_STATUS) &
8761 IWN_FH_TX_STATUS_IDLE(chnl))
8770 iwn_reset_rx_ring(sc, &sc->rxq);
8772 /* Reset all TX rings. */
8773 for (qid = 0; qid < sc->ntxqs; qid++)
8774 iwn_reset_tx_ring(sc, &sc->txq[qid]);
8776 if (iwn_nic_lock(sc) == 0) {
8777 iwn_prph_write(sc, IWN_APMG_CLK_DIS,
8778 IWN_APMG_CLK_CTRL_DMA_CLK_RQT);
8782 /* Power OFF adapter. */
8787 iwn_panicked(void *arg0, int pending)
8789 struct iwn_softc *sc = arg0;
8790 struct ieee80211com *ic = &sc->sc_ic;
8791 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps);
8797 printf("%s: null vap\n", __func__);
8801 device_printf(sc->sc_dev, "%s: controller panicked, iv_state = %d; "
8802 "restarting\n", __func__, vap->iv_state);
8805 * This is not enough work. We need to also reinitialise
8806 * the correct transmit state for aggregation enabled queues,
8807 * which has a very specific requirement of
8808 * ring index = 802.11 seqno % 256. If we don't do this (which
8809 * we definitely don't!) then the firmware will just panic again.
8812 ieee80211_restart_all(ic);
8816 iwn_stop_locked(sc);
8817 if ((error = iwn_init_locked(sc)) != 0) {
8818 device_printf(sc->sc_dev,
8819 "%s: could not init hardware\n", __func__);
8822 if (vap->iv_state >= IEEE80211_S_AUTH &&
8823 (error = iwn_auth(sc, vap)) != 0) {
8824 device_printf(sc->sc_dev,
8825 "%s: could not move to auth state\n", __func__);
8827 if (vap->iv_state >= IEEE80211_S_RUN &&
8828 (error = iwn_run(sc, vap)) != 0) {
8829 device_printf(sc->sc_dev,
8830 "%s: could not move to run state\n", __func__);
8839 iwn_init_locked(struct iwn_softc *sc)
8843 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__);
8845 IWN_LOCK_ASSERT(sc);
8847 if (sc->sc_flags & IWN_FLAG_RUNNING)
8850 sc->sc_flags |= IWN_FLAG_RUNNING;
8852 if ((error = iwn_hw_prepare(sc)) != 0) {
8853 device_printf(sc->sc_dev, "%s: hardware not ready, error %d\n",
8858 /* Initialize interrupt mask to default value. */
8859 sc->int_mask = IWN_INT_MASK_DEF;
8860 sc->sc_flags &= ~IWN_FLAG_USE_ICT;
8862 /* Check that the radio is not disabled by hardware switch. */
8863 if (!(IWN_READ(sc, IWN_GP_CNTRL) & IWN_GP_CNTRL_RFKILL)) {
8868 /* Read firmware images from the filesystem. */
8869 if ((error = iwn_read_firmware(sc)) != 0) {
8870 device_printf(sc->sc_dev,
8871 "%s: could not read firmware, error %d\n", __func__,
8876 /* Initialize hardware and upload firmware. */
8877 error = iwn_hw_init(sc);
8878 iwn_unload_firmware(sc);
8880 device_printf(sc->sc_dev,
8881 "%s: could not initialize hardware, error %d\n", __func__,
8886 /* Configure adapter now that it is ready. */
8887 if ((error = iwn_config(sc)) != 0) {
8888 device_printf(sc->sc_dev,
8889 "%s: could not configure device, error %d\n", __func__,
8894 callout_reset(&sc->watchdog_to, hz, iwn_watchdog, sc);
8897 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__);
8902 iwn_stop_locked(sc);
8904 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end in error\n",__func__);
8910 iwn_init(struct iwn_softc *sc)
8915 error = iwn_init_locked(sc);
8922 iwn_stop_locked(struct iwn_softc *sc)
8925 IWN_LOCK_ASSERT(sc);
8927 if (!(sc->sc_flags & IWN_FLAG_RUNNING))
8930 sc->sc_is_scanning = 0;
8931 sc->sc_tx_timer = 0;
8932 callout_stop(&sc->watchdog_to);
8933 callout_stop(&sc->scan_timeout);
8934 callout_stop(&sc->calib_to);
8935 sc->sc_flags &= ~IWN_FLAG_RUNNING;
8937 /* Power OFF hardware. */
8942 iwn_stop(struct iwn_softc *sc)
8945 iwn_stop_locked(sc);
8950 * Callback from net80211 to start a scan.
8953 iwn_scan_start(struct ieee80211com *ic)
8955 struct iwn_softc *sc = ic->ic_softc;
8958 /* make the link LED blink while we're scanning */
8959 iwn_set_led(sc, IWN_LED_LINK, 20, 2);
8964 * Callback from net80211 to terminate a scan.
8967 iwn_scan_end(struct ieee80211com *ic)
8969 struct iwn_softc *sc = ic->ic_softc;
8970 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps);
8973 if (vap->iv_state == IEEE80211_S_RUN) {
8974 /* Set link LED to ON status if we are associated */
8975 iwn_set_led(sc, IWN_LED_LINK, 0, 1);
8981 * Callback from net80211 to force a channel change.
8984 iwn_set_channel(struct ieee80211com *ic)
8986 const struct ieee80211_channel *c = ic->ic_curchan;
8987 struct iwn_softc *sc = ic->ic_softc;
8990 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__);
8993 sc->sc_rxtap.wr_chan_freq = htole16(c->ic_freq);
8994 sc->sc_rxtap.wr_chan_flags = htole16(c->ic_flags);
8995 sc->sc_txtap.wt_chan_freq = htole16(c->ic_freq);
8996 sc->sc_txtap.wt_chan_flags = htole16(c->ic_flags);
8999 * Only need to set the channel in Monitor mode. AP scanning and auth
9000 * are already taken care of by their respective firmware commands.
9002 if (ic->ic_opmode == IEEE80211_M_MONITOR) {
9003 error = iwn_config(sc);
9005 device_printf(sc->sc_dev,
9006 "%s: error %d settting channel\n", __func__, error);
9012 * Callback from net80211 to start scanning of the current channel.
9015 iwn_scan_curchan(struct ieee80211_scan_state *ss, unsigned long maxdwell)
9017 struct ieee80211vap *vap = ss->ss_vap;
9018 struct ieee80211com *ic = vap->iv_ic;
9019 struct iwn_softc *sc = ic->ic_softc;
9023 error = iwn_scan(sc, vap, ss, ic->ic_curchan);
9026 ieee80211_cancel_scan(vap);
9030 * Callback from net80211 to handle the minimum dwell time being met.
9031 * The intent is to terminate the scan but we just let the firmware
9032 * notify us when it's finished as we have no safe way to abort it.
9035 iwn_scan_mindwell(struct ieee80211_scan_state *ss)
9037 /* NB: don't try to abort scan; wait for firmware to finish */
9040 #define IWN_DESC(x) case x: return #x
9043 * Translate CSR code to string
9045 static char *iwn_get_csr_string(int csr)
9048 IWN_DESC(IWN_HW_IF_CONFIG);
9049 IWN_DESC(IWN_INT_COALESCING);
9051 IWN_DESC(IWN_INT_MASK);
9052 IWN_DESC(IWN_FH_INT);
9053 IWN_DESC(IWN_GPIO_IN);
9054 IWN_DESC(IWN_RESET);
9055 IWN_DESC(IWN_GP_CNTRL);
9056 IWN_DESC(IWN_HW_REV);
9057 IWN_DESC(IWN_EEPROM);
9058 IWN_DESC(IWN_EEPROM_GP);
9059 IWN_DESC(IWN_OTP_GP);
9061 IWN_DESC(IWN_GP_UCODE);
9062 IWN_DESC(IWN_GP_DRIVER);
9063 IWN_DESC(IWN_UCODE_GP1);
9064 IWN_DESC(IWN_UCODE_GP2);
9066 IWN_DESC(IWN_DRAM_INT_TBL);
9067 IWN_DESC(IWN_GIO_CHICKEN);
9068 IWN_DESC(IWN_ANA_PLL);
9069 IWN_DESC(IWN_HW_REV_WA);
9070 IWN_DESC(IWN_DBG_HPET_MEM);
9072 return "UNKNOWN CSR";
9077 * This function print firmware register
9080 iwn_debug_register(struct iwn_softc *sc)
9083 static const uint32_t csr_tbl[] = {
9108 DPRINTF(sc, IWN_DEBUG_REGISTER,
9109 "CSR values: (2nd byte of IWN_INT_COALESCING is IWN_INT_PERIODIC)%s",
9111 for (i = 0; i < nitems(csr_tbl); i++){
9112 DPRINTF(sc, IWN_DEBUG_REGISTER," %10s: 0x%08x ",
9113 iwn_get_csr_string(csr_tbl[i]), IWN_READ(sc, csr_tbl[i]));
9115 DPRINTF(sc, IWN_DEBUG_REGISTER,"%s","\n");
9117 DPRINTF(sc, IWN_DEBUG_REGISTER,"%s","\n");