]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - sys/dev/malo/if_malo_pci.c
Add quirks to disable READ CAPACITY (16) for PNY USB 3.0 Flash Drives.
[FreeBSD/FreeBSD.git] / sys / dev / malo / if_malo_pci.c
1 /*-
2  * Copyright (c) 2007 Marvell Semiconductor, Inc.
3  * Copyright (c) 2007 Sam Leffler, Errno Consulting
4  * Copyright (c) 2008 Weongyo Jeong <weongyo@freebsd.org>
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer,
12  *    without modification.
13  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
14  *    similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
15  *    redistribution must be conditioned upon including a substantially
16  *    similar Disclaimer requirement for further binary redistribution.
17  *
18  * NO WARRANTY
19  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
20  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
21  * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
22  * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
23  * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
24  * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
27  * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
29  * THE POSSIBILITY OF SUCH DAMAGES.
30  */
31
32 #include <sys/cdefs.h>
33 #ifdef __FreeBSD__
34 __FBSDID("$FreeBSD$");
35 #endif
36
37 /*
38  * PCI front-end for the Marvell 88W8335 Wireless LAN controller driver.
39  */
40
41 #include <sys/param.h>
42 #include <sys/kernel.h>
43 #include <sys/malloc.h>
44 #include <sys/module.h>
45 #include <sys/socket.h>
46 #include <sys/sysctl.h>
47
48 #include <machine/bus.h>
49 #include <sys/bus.h>
50 #include <sys/rman.h>
51  
52 #include <net/if.h>
53 #include <net/if_var.h>
54 #include <net/if_media.h>
55 #include <net/ethernet.h>
56
57 #include <net80211/ieee80211_var.h>
58
59 #include <dev/malo/if_malo.h>
60
61 #include <dev/pci/pcivar.h>
62 #include <dev/pci/pcireg.h>
63
64 /*
65  * PCI glue.
66  */
67
68 #define MALO_RESOURCE_MAX               2
69 #define MALO_MSI_MESSAGES               1
70
71 struct malo_pci_softc {
72         struct malo_softc               malo_sc;
73         struct resource_spec            *malo_mem_spec;
74         struct resource                 *malo_res_mem[MALO_RESOURCE_MAX];
75         struct resource_spec            *malo_irq_spec;
76         struct resource                 *malo_res_irq[MALO_MSI_MESSAGES];
77         void                            *malo_intrhand[MALO_MSI_MESSAGES];
78         int                             malo_msi;
79 };
80
81 /*
82  * Tunable variables.
83  */
84 SYSCTL_DECL(_hw_malo);
85 static SYSCTL_NODE(_hw_malo, OID_AUTO, pci, CTLFLAG_RD, 0,
86     "Marvell 88W8335 driver PCI parameters");
87
88 static int msi_disable = 0;                             /* MSI disabled  */
89 SYSCTL_INT(_hw_malo_pci, OID_AUTO, msi_disable, CTLFLAG_RWTUN, &msi_disable,
90             0, "MSI disabled");
91
92 /*
93  * Devices supported by this driver.
94  */
95 #define VENDORID_MARVELL                0X11AB
96 #define DEVICEID_MRVL_88W8310           0X1FA7
97 #define DEVICEID_MRVL_88W8335R1         0X1FAA
98 #define DEVICEID_MRVL_88W8335R2         0X1FAB
99
100 static struct malo_product {
101         uint16_t                        mp_vendorid;
102         uint16_t                        mp_deviceid;
103         const char                      *mp_name;
104 } malo_products[] = {
105         { VENDORID_MARVELL, DEVICEID_MRVL_88W8310,
106             "Marvell Libertas 88W8310 802.11g Wireless Adapter" },
107         { VENDORID_MARVELL, DEVICEID_MRVL_88W8335R1,
108             "Marvell Libertas 88W8335 802.11g Wireless Adapter" },
109         { VENDORID_MARVELL, DEVICEID_MRVL_88W8335R2,
110             "Marvell Libertas 88W8335 802.11g Wireless Adapter" }
111 };
112
113 static struct resource_spec malo_res_spec_mem[] = {
114         { SYS_RES_MEMORY,       PCIR_BAR(0),    RF_ACTIVE },
115         { SYS_RES_MEMORY,       PCIR_BAR(1),    RF_ACTIVE },
116         { -1,                   0,              0 }
117 };
118
119 static struct resource_spec malo_res_spec_legacy[] = {
120         { SYS_RES_IRQ,          0,              RF_ACTIVE | RF_SHAREABLE },
121         { -1,                   0,              0 }
122 };
123
124 static struct resource_spec malo_res_spec_msi[] = {
125         { SYS_RES_IRQ,          1,              RF_ACTIVE },
126         { -1,                   0,              0 }
127 };
128
129 static int      malo_pci_detach(device_t);
130
131 static int
132 malo_pci_probe(device_t dev)
133 {
134 #define N(a)    (sizeof(a) / sizeof((a)[0]))
135         struct malo_product *mp;
136         uint16_t vendor, devid;
137         int i;
138
139         vendor = pci_get_vendor(dev);
140         devid = pci_get_device(dev);
141         mp = malo_products;
142
143         for (i = 0; i < N(malo_products); i++, mp++) {
144                 if (vendor == mp->mp_vendorid && devid == mp->mp_deviceid) {
145                         device_set_desc(dev, mp->mp_name);
146                         return (BUS_PROBE_DEFAULT);
147                 }
148         }
149
150         return (ENXIO);
151 #undef N
152 }
153
154 static int
155 malo_pci_attach(device_t dev)
156 {
157         int error = ENXIO, i, msic, reg;
158         struct malo_pci_softc *psc = device_get_softc(dev);
159         struct malo_softc *sc = &psc->malo_sc;
160
161         sc->malo_dev = dev;
162         
163         pci_enable_busmaster(dev);
164
165         /* 
166          * Setup memory-mapping of PCI registers.
167          */
168         psc->malo_mem_spec = malo_res_spec_mem;
169         error = bus_alloc_resources(dev, psc->malo_mem_spec, psc->malo_res_mem);
170         if (error) {
171                 device_printf(dev, "couldn't allocate memory resources\n");
172                 return (ENXIO);
173         }
174
175         /*
176          * Arrange and allocate interrupt line.
177          */
178         sc->malo_invalid = 1;
179
180         if (pci_find_cap(dev, PCIY_EXPRESS, &reg) == 0) {
181                 msic = pci_msi_count(dev);
182                 if (bootverbose)
183                         device_printf(dev, "MSI count : %d\n", msic);
184         } else
185                 msic = 0;
186
187         psc->malo_irq_spec = malo_res_spec_legacy;
188         if (msic == MALO_MSI_MESSAGES && msi_disable == 0) {
189                 if (pci_alloc_msi(dev, &msic) == 0) {
190                         if (msic == MALO_MSI_MESSAGES) {
191                                 device_printf(dev, "Using %d MSI messages\n",
192                                     msic);
193                                 psc->malo_irq_spec = malo_res_spec_msi;
194                                 psc->malo_msi = 1;
195                         } else
196                                 pci_release_msi(dev);
197                 }
198         }
199
200         error = bus_alloc_resources(dev, psc->malo_irq_spec, psc->malo_res_irq);
201         if (error) {
202                 device_printf(dev, "couldn't allocate IRQ resources\n");
203                 goto bad;
204         }
205
206         if (psc->malo_msi == 0)
207                 error = bus_setup_intr(dev, psc->malo_res_irq[0],
208                     INTR_TYPE_NET | INTR_MPSAFE, malo_intr, NULL, sc,
209                     &psc->malo_intrhand[0]);
210         else {
211                 for (i = 0; i < MALO_MSI_MESSAGES; i++) {
212                         error = bus_setup_intr(dev, psc->malo_res_irq[i],
213                             INTR_TYPE_NET | INTR_MPSAFE, malo_intr, NULL, sc,
214                             &psc->malo_intrhand[i]);
215                         if (error != 0)
216                                 break;
217                 }
218         }
219
220         /*
221          * Setup DMA descriptor area.
222          */
223         if (bus_dma_tag_create(bus_get_dma_tag(dev),    /* parent */
224                                1, 0,                    /* alignment, bounds */
225                                BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
226                                BUS_SPACE_MAXADDR,       /* highaddr */
227                                NULL, NULL,              /* filter, filterarg */
228                                BUS_SPACE_MAXADDR,       /* maxsize */
229                                0,                       /* nsegments */
230                                BUS_SPACE_MAXADDR,       /* maxsegsize */
231                                0,                       /* flags */
232                                NULL,                    /* lockfunc */
233                                NULL,                    /* lockarg */
234                                &sc->malo_dmat)) {
235                 device_printf(dev, "cannot allocate DMA tag\n");
236                 goto bad1;
237         }
238
239         sc->malo_io0t = rman_get_bustag(psc->malo_res_mem[0]);
240         sc->malo_io0h = rman_get_bushandle(psc->malo_res_mem[0]);
241         sc->malo_io1t = rman_get_bustag(psc->malo_res_mem[1]);
242         sc->malo_io1h = rman_get_bushandle(psc->malo_res_mem[1]);
243
244         error = malo_attach(pci_get_device(dev), sc);
245
246         if (error != 0)
247                 goto bad2;
248
249         return (error);
250
251 bad2:
252         bus_dma_tag_destroy(sc->malo_dmat);
253 bad1:
254         if (psc->malo_msi == 0)
255                 bus_teardown_intr(dev, psc->malo_res_irq[0],
256                     psc->malo_intrhand[0]);
257         else {
258                 for (i = 0; i < MALO_MSI_MESSAGES; i++)
259                         bus_teardown_intr(dev, psc->malo_res_irq[i],
260                             psc->malo_intrhand[i]);
261         }
262         bus_release_resources(dev, psc->malo_irq_spec, psc->malo_res_irq);
263 bad:
264         if (psc->malo_msi != 0)
265                 pci_release_msi(dev);
266         bus_release_resources(dev, psc->malo_mem_spec, psc->malo_res_mem);
267
268         return (error);
269 }
270
271 static int
272 malo_pci_detach(device_t dev)
273 {
274         int i;
275         struct malo_pci_softc *psc = device_get_softc(dev);
276         struct malo_softc *sc = &psc->malo_sc;
277
278         /* check if device was removed */
279         sc->malo_invalid = !bus_child_present(dev);
280
281         malo_detach(sc);
282
283         bus_generic_detach(dev);
284
285         if (psc->malo_msi == 0)
286                 bus_teardown_intr(dev, psc->malo_res_irq[0],
287                     psc->malo_intrhand[0]);
288         else {
289                 for (i = 0; i < MALO_MSI_MESSAGES; i++)
290                         bus_teardown_intr(dev, psc->malo_res_irq[i],
291                             psc->malo_intrhand[i]);
292
293                 pci_release_msi(dev);
294         }
295
296         bus_release_resources(dev, psc->malo_irq_spec, psc->malo_res_irq);
297         bus_dma_tag_destroy(sc->malo_dmat);
298         bus_release_resources(dev, psc->malo_mem_spec, psc->malo_res_mem);
299
300         return (0);
301 }
302
303 static int
304 malo_pci_shutdown(device_t dev)
305 {
306         struct malo_pci_softc *psc = device_get_softc(dev);
307
308         malo_shutdown(&psc->malo_sc);
309
310         return (0);
311 }
312
313 static int
314 malo_pci_suspend(device_t dev)
315 {
316         struct malo_pci_softc *psc = device_get_softc(dev);
317
318         malo_suspend(&psc->malo_sc);
319
320         return (0);
321 }
322
323 static int
324 malo_pci_resume(device_t dev)
325 {
326         struct malo_pci_softc *psc = device_get_softc(dev);
327
328         malo_resume(&psc->malo_sc);
329
330         return (0);
331 }
332
333 static device_method_t malo_pci_methods[] = {
334         /* Device interface */
335         DEVMETHOD(device_probe,         malo_pci_probe),
336         DEVMETHOD(device_attach,        malo_pci_attach),
337         DEVMETHOD(device_detach,        malo_pci_detach),
338         DEVMETHOD(device_shutdown,      malo_pci_shutdown),
339         DEVMETHOD(device_suspend,       malo_pci_suspend),
340         DEVMETHOD(device_resume,        malo_pci_resume),
341         { 0,0 }
342 };
343
344 static driver_t malo_pci_driver = {
345         "malo",
346         malo_pci_methods,
347         sizeof(struct malo_pci_softc)
348 };
349
350 static  devclass_t malo_devclass;
351 DRIVER_MODULE(malo, pci, malo_pci_driver, malo_devclass, 0, 0);
352 MODULE_VERSION(malo, 1);
353 MODULE_DEPEND(malo, wlan, 1, 1, 1);             /* 802.11 media layer */
354 MODULE_DEPEND(malo, firmware, 1, 1, 1);