MFV r342175:

[FreeBSD/FreeBSD.git] / sys / dev / mpr / mpr_mapping.c

/*-
 * Copyright (c) 2011-2015 LSI Corp.
 * Copyright (c) 2013-2016 Avago Technologies
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD
 */

#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");

/* TODO Move headers to mprvar */
#include <sys/types.h>
#include <sys/param.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/kthread.h>
#include <sys/taskqueue.h>
#include <sys/bus.h>
#include <sys/endian.h>
#include <sys/sysctl.h>
#include <sys/eventhandler.h>
#include <sys/uio.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <dev/mpr/mpi/mpi2_type.h>
#include <dev/mpr/mpi/mpi2.h>
#include <dev/mpr/mpi/mpi2_ioc.h>
#include <dev/mpr/mpi/mpi2_sas.h>
#include <dev/mpr/mpi/mpi2_pci.h>
#include <dev/mpr/mpi/mpi2_cnfg.h>
#include <dev/mpr/mpi/mpi2_init.h>
#include <dev/mpr/mpi/mpi2_tool.h>
#include <dev/mpr/mpr_ioctl.h>
#include <dev/mpr/mprvar.h>
#include <dev/mpr/mpr_mapping.h>

/**
 * _mapping_clear_map_entry - Clear a particular mapping entry.
 * @map_entry: map table entry
 *
 * Returns nothing.
 */
static inline void
_mapping_clear_map_entry(struct dev_mapping_table *map_entry)
{
        map_entry->physical_id = 0;
        map_entry->device_info = 0;
        map_entry->phy_bits = 0;
        map_entry->dpm_entry_num = MPR_DPM_BAD_IDX;
        map_entry->dev_handle = 0;
        map_entry->id = -1;
        map_entry->missing_count = 0;
        map_entry->init_complete = 0;
        map_entry->TLR_bits = (u8)MPI2_SCSIIO_CONTROL_NO_TLR;
}

/**
 * _mapping_clear_enc_entry - Clear a particular enclosure table entry.
 * @enc_entry: enclosure table entry
 *
 * Returns nothing.
 */
static inline void
_mapping_clear_enc_entry(struct enc_mapping_table *enc_entry)
{
        enc_entry->enclosure_id = 0;
        enc_entry->start_index = MPR_MAPTABLE_BAD_IDX;
        enc_entry->phy_bits = 0;
        enc_entry->dpm_entry_num = MPR_DPM_BAD_IDX;
        enc_entry->enc_handle = 0;
        enc_entry->num_slots = 0;
        enc_entry->start_slot = 0;
        enc_entry->missing_count = 0;
        enc_entry->removal_flag = 0;
        enc_entry->skip_search = 0;
        enc_entry->init_complete = 0;
}

/**
 * _mapping_commit_enc_entry - write a particular enc entry in DPM page0.
 * @sc: per adapter object
 * @enc_entry: enclosure table entry
 *
 * Returns 0 for success, non-zero for failure.
 */
static int
_mapping_commit_enc_entry(struct mpr_softc *sc,
    struct enc_mapping_table *et_entry)
{
        Mpi2DriverMap0Entry_t *dpm_entry;
        struct dev_mapping_table *mt_entry;
        Mpi2ConfigReply_t mpi_reply;
        Mpi2DriverMappingPage0_t config_page;

        if (!sc->is_dpm_enable)
                return 0;

        memset(&config_page, 0, sizeof(Mpi2DriverMappingPage0_t));
        memcpy(&config_page.Header, (u8 *) sc->dpm_pg0,
            sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
        dpm_entry = (Mpi2DriverMap0Entry_t *)((u8 *)sc->dpm_pg0 +
            sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
        dpm_entry += et_entry->dpm_entry_num;
        dpm_entry->PhysicalIdentifier.Low =
            ( 0xFFFFFFFF & et_entry->enclosure_id);
        dpm_entry->PhysicalIdentifier.High =
            ( et_entry->enclosure_id >> 32);
        mt_entry = &sc->mapping_table[et_entry->start_index];
        dpm_entry->DeviceIndex = htole16(mt_entry->id);
        dpm_entry->MappingInformation = et_entry->num_slots;
        dpm_entry->MappingInformation <<= MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT;
        dpm_entry->MappingInformation |= et_entry->missing_count;
        dpm_entry->MappingInformation = htole16(dpm_entry->MappingInformation);
        dpm_entry->PhysicalBitsMapping = htole32(et_entry->phy_bits);
        dpm_entry->Reserved1 = 0;

        mpr_dprint(sc, MPR_MAPPING, "%s: Writing DPM entry %d for enclosure.\n",
            __func__, et_entry->dpm_entry_num);
        memcpy(&config_page.Entry, (u8 *)dpm_entry,
            sizeof(Mpi2DriverMap0Entry_t));
        if (mpr_config_set_dpm_pg0(sc, &mpi_reply, &config_page,
            et_entry->dpm_entry_num)) {
                mpr_dprint(sc, MPR_ERROR | MPR_MAPPING, "%s: Write of DPM "
                    "entry %d for enclosure failed.\n", __func__,
                    et_entry->dpm_entry_num);
                dpm_entry->MappingInformation = le16toh(dpm_entry->
                    MappingInformation);
                dpm_entry->DeviceIndex = le16toh(dpm_entry->DeviceIndex);
                dpm_entry->PhysicalBitsMapping =
                    le32toh(dpm_entry->PhysicalBitsMapping);
                return -1;
        }
        dpm_entry->MappingInformation = le16toh(dpm_entry->
            MappingInformation);
        dpm_entry->DeviceIndex = le16toh(dpm_entry->DeviceIndex);
        dpm_entry->PhysicalBitsMapping =
            le32toh(dpm_entry->PhysicalBitsMapping);
        return 0;
}

/**
 * _mapping_commit_map_entry - write a particular map table entry in DPM page0.
 * @sc: per adapter object
 * @mt_entry: mapping table entry
 *
 * Returns 0 for success, non-zero for failure.
 */

static int
_mapping_commit_map_entry(struct mpr_softc *sc,
    struct dev_mapping_table *mt_entry)
{
        Mpi2DriverMap0Entry_t *dpm_entry;
        Mpi2ConfigReply_t mpi_reply;
        Mpi2DriverMappingPage0_t config_page;

        if (!sc->is_dpm_enable)
                return 0;

        /*
         * It's possible that this Map Entry points to a BAD DPM index. This
         * can happen if the Map Entry is a for a missing device and the DPM
         * entry that was being used by this device is now being used by some
         * new device. So, check for a BAD DPM index and just return if so.
         */
        if (mt_entry->dpm_entry_num == MPR_DPM_BAD_IDX) {
                mpr_dprint(sc, MPR_MAPPING, "%s: DPM entry location for target "
                    "%d is invalid. DPM will not be written.\n", __func__,
                    mt_entry->id);
                return 0;
        }

        memset(&config_page, 0, sizeof(Mpi2DriverMappingPage0_t));
        memcpy(&config_page.Header, (u8 *)sc->dpm_pg0,
            sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
        dpm_entry = (Mpi2DriverMap0Entry_t *)((u8 *) sc->dpm_pg0 +
            sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
        dpm_entry = dpm_entry + mt_entry->dpm_entry_num;
        dpm_entry->PhysicalIdentifier.Low = (0xFFFFFFFF &
            mt_entry->physical_id);
        dpm_entry->PhysicalIdentifier.High = (mt_entry->physical_id >> 32);
        dpm_entry->DeviceIndex = htole16(mt_entry->id);
        dpm_entry->MappingInformation = htole16(mt_entry->missing_count);
        dpm_entry->PhysicalBitsMapping = 0;
        dpm_entry->Reserved1 = 0;
        memcpy(&config_page.Entry, (u8 *)dpm_entry,
            sizeof(Mpi2DriverMap0Entry_t));

        mpr_dprint(sc, MPR_MAPPING, "%s: Writing DPM entry %d for target %d.\n",
            __func__, mt_entry->dpm_entry_num, mt_entry->id);
        if (mpr_config_set_dpm_pg0(sc, &mpi_reply, &config_page,
            mt_entry->dpm_entry_num)) {
                mpr_dprint(sc, MPR_ERROR | MPR_MAPPING, "%s: Write of DPM "
                    "entry %d for target %d failed.\n", __func__,
                    mt_entry->dpm_entry_num, mt_entry->id);
                dpm_entry->MappingInformation = le16toh(dpm_entry->
                    MappingInformation);
                dpm_entry->DeviceIndex = le16toh(dpm_entry->DeviceIndex);
                return -1;
        }

        dpm_entry->MappingInformation = le16toh(dpm_entry->MappingInformation);
        dpm_entry->DeviceIndex = le16toh(dpm_entry->DeviceIndex);
        return 0;
}

/**
 * _mapping_get_ir_maprange - get start and end index for IR map range.
 * @sc: per adapter object
 * @start_idx: place holder for start index
 * @end_idx: place holder for end index
 *
 * The IR volumes can be mapped either at start or end of the mapping table
 * this function gets the detail of where IR volume mapping starts and ends
 * in the device mapping table
 *
 * Returns nothing.
 */
static void
_mapping_get_ir_maprange(struct mpr_softc *sc, u32 *start_idx, u32 *end_idx)
{
        u16 volume_mapping_flags;
        u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);

        volume_mapping_flags = le16toh(sc->ioc_pg8.IRVolumeMappingFlags) &
            MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
        if (volume_mapping_flags == MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING) {
                *start_idx = 0;
                if (ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0)
                        *start_idx = 1;
        } else
                *start_idx = sc->max_devices - sc->max_volumes;
        *end_idx = *start_idx + sc->max_volumes - 1;
}

/**
 * _mapping_get_enc_idx_from_id - get enclosure index from enclosure ID
 * @sc: per adapter object
 * @enc_id: enclosure logical identifier
 *
 * Returns the index of enclosure entry on success or bad index.
 */
static u8
_mapping_get_enc_idx_from_id(struct mpr_softc *sc, u64 enc_id,
    u64 phy_bits)
{
        struct enc_mapping_table *et_entry;
        u8 enc_idx = 0;

        for (enc_idx = 0; enc_idx < sc->num_enc_table_entries; enc_idx++) {
                et_entry = &sc->enclosure_table[enc_idx];
                if ((et_entry->enclosure_id == le64toh(enc_id)) &&
                    (!et_entry->phy_bits || (et_entry->phy_bits &
                    le32toh(phy_bits))))
                        return enc_idx;
        }
        return MPR_ENCTABLE_BAD_IDX;
}

/**
 * _mapping_get_enc_idx_from_handle - get enclosure index from handle
 * @sc: per adapter object
 * @enc_id: enclosure handle
 *
 * Returns the index of enclosure entry on success or bad index.
 */
static u8
_mapping_get_enc_idx_from_handle(struct mpr_softc *sc, u16 handle)
{
        struct enc_mapping_table *et_entry;
        u8 enc_idx = 0;

        for (enc_idx = 0; enc_idx < sc->num_enc_table_entries; enc_idx++) {
                et_entry = &sc->enclosure_table[enc_idx];
                if (et_entry->missing_count)
                        continue;
                if (et_entry->enc_handle == handle)
                        return enc_idx;
        }
        return MPR_ENCTABLE_BAD_IDX;
}

/**
 * _mapping_get_high_missing_et_idx - get missing enclosure index
 * @sc: per adapter object
 *
 * Search through the enclosure table and identifies the enclosure entry
 * with high missing count and returns it's index
 *
 * Returns the index of enclosure entry on success or bad index.
 */
static u8
_mapping_get_high_missing_et_idx(struct mpr_softc *sc)
{
        struct enc_mapping_table *et_entry;
        u8 high_missing_count = 0;
        u8 enc_idx, high_idx = MPR_ENCTABLE_BAD_IDX;

        for (enc_idx = 0; enc_idx < sc->num_enc_table_entries; enc_idx++) {
                et_entry = &sc->enclosure_table[enc_idx];
                if ((et_entry->missing_count > high_missing_count) &&
                    !et_entry->skip_search) {
                        high_missing_count = et_entry->missing_count;
                        high_idx = enc_idx;
                }
        }
        return high_idx;
}

/**
 * _mapping_get_high_missing_mt_idx - get missing map table index
 * @sc: per adapter object
 *
 * Search through the map table and identifies the device entry
 * with high missing count and returns it's index
 *
 * Returns the index of map table entry on success or bad index.
 */
static u32
_mapping_get_high_missing_mt_idx(struct mpr_softc *sc)
{
        u32 map_idx, high_idx = MPR_MAPTABLE_BAD_IDX;
        u8 high_missing_count = 0;
        u32 start_idx, end_idx, start_idx_ir, end_idx_ir;
        struct dev_mapping_table *mt_entry;
        u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);

        start_idx = 0;
        start_idx_ir = 0;
        end_idx_ir = 0;
        end_idx = sc->max_devices;
        if (ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0)
                start_idx = 1;
        if (sc->ir_firmware) {
                _mapping_get_ir_maprange(sc, &start_idx_ir, &end_idx_ir);
                if (start_idx == start_idx_ir)
                        start_idx = end_idx_ir + 1;
                else
                        end_idx = start_idx_ir;
        }
        mt_entry = &sc->mapping_table[start_idx];
        for (map_idx = start_idx; map_idx < end_idx; map_idx++, mt_entry++) {
                if (mt_entry->missing_count > high_missing_count) {
                        high_missing_count =  mt_entry->missing_count;
                        high_idx = map_idx;
                }
        }
        return high_idx;
}

/**
 * _mapping_get_ir_mt_idx_from_wwid - get map table index from volume WWID
 * @sc: per adapter object
 * @wwid: world wide unique ID of the volume
 *
 * Returns the index of map table entry on success or bad index.
 */
static u32
_mapping_get_ir_mt_idx_from_wwid(struct mpr_softc *sc, u64 wwid)
{
        u32 start_idx, end_idx, map_idx;
        struct dev_mapping_table *mt_entry;

        _mapping_get_ir_maprange(sc, &start_idx, &end_idx);
        mt_entry = &sc->mapping_table[start_idx];
        for (map_idx = start_idx; map_idx <= end_idx; map_idx++, mt_entry++)
                if (mt_entry->physical_id == wwid)
                        return map_idx;

        return MPR_MAPTABLE_BAD_IDX;
}

/**
 * _mapping_get_mt_idx_from_id - get map table index from a device ID
 * @sc: per adapter object
 * @dev_id: device identifer (SAS Address)
 *
 * Returns the index of map table entry on success or bad index.
 */
static u32
_mapping_get_mt_idx_from_id(struct mpr_softc *sc, u64 dev_id)
{
        u32 map_idx;
        struct dev_mapping_table *mt_entry;

        for (map_idx = 0; map_idx < sc->max_devices; map_idx++) {
                mt_entry = &sc->mapping_table[map_idx];
                if (mt_entry->physical_id == dev_id)
                        return map_idx;
        }
        return MPR_MAPTABLE_BAD_IDX;
}

/**
 * _mapping_get_ir_mt_idx_from_handle - get map table index from volume handle
 * @sc: per adapter object
 * @wwid: volume device handle
 *
 * Returns the index of map table entry on success or bad index.
 */
static u32
_mapping_get_ir_mt_idx_from_handle(struct mpr_softc *sc, u16 volHandle)
{
        u32 start_idx, end_idx, map_idx;
        struct dev_mapping_table *mt_entry;

        _mapping_get_ir_maprange(sc, &start_idx, &end_idx);
        mt_entry = &sc->mapping_table[start_idx];
        for (map_idx = start_idx; map_idx <= end_idx; map_idx++, mt_entry++)
                if (mt_entry->dev_handle == volHandle)
                        return map_idx;

        return MPR_MAPTABLE_BAD_IDX;
}

/**
 * _mapping_get_mt_idx_from_handle - get map table index from handle
 * @sc: per adapter object
 * @dev_id: device handle
 *
 * Returns the index of map table entry on success or bad index.
 */
static u32
_mapping_get_mt_idx_from_handle(struct mpr_softc *sc, u16 handle)
{
        u32 map_idx;
        struct dev_mapping_table *mt_entry;

        for (map_idx = 0; map_idx < sc->max_devices; map_idx++) {
                mt_entry = &sc->mapping_table[map_idx];
                if (mt_entry->dev_handle == handle)
                        return map_idx;
        }
        return MPR_MAPTABLE_BAD_IDX;
}

/**
 * _mapping_get_free_ir_mt_idx - get first free index for a volume
 * @sc: per adapter object
 *
 * Search through mapping table for free index for a volume and if no free
 * index then looks for a volume with high mapping index
 *
 * Returns the index of map table entry on success or bad index.
 */
static u32
_mapping_get_free_ir_mt_idx(struct mpr_softc *sc)
{
        u8 high_missing_count = 0;
        u32 start_idx, end_idx, map_idx;
        u32 high_idx = MPR_MAPTABLE_BAD_IDX;
        struct dev_mapping_table *mt_entry;

        /*
         * The IN_USE flag should be clear if the entry is available to use.
         * This flag is cleared on initialization and and when a volume is
         * deleted. All other times this flag should be set. If, for some
         * reason, a free entry cannot be found, look for the entry with the
         * highest missing count just in case there is one.
         */
        _mapping_get_ir_maprange(sc, &start_idx, &end_idx);
        mt_entry = &sc->mapping_table[start_idx];
        for (map_idx = start_idx; map_idx <= end_idx; map_idx++, mt_entry++) {
                if (!(mt_entry->device_info & MPR_MAP_IN_USE))
                        return map_idx;

                if (mt_entry->missing_count > high_missing_count) {
                        high_missing_count = mt_entry->missing_count;
                        high_idx = map_idx;
                }
        }

        if (high_idx == MPR_MAPTABLE_BAD_IDX) {
                mpr_dprint(sc, MPR_ERROR | MPR_MAPPING, "%s: Could not find a "
                    "free entry in the mapping table for a Volume. The mapping "
                    "table is probably corrupt.\n", __func__);
        }
        
        return high_idx;
}

/**
 * _mapping_get_free_mt_idx - get first free index for a device
 * @sc: per adapter object
 * @start_idx: offset in the table to start search
 *
 * Returns the index of map table entry on success or bad index.
 */
static u32
_mapping_get_free_mt_idx(struct mpr_softc *sc, u32 start_idx)
{
        u32 map_idx, max_idx = sc->max_devices;
        struct dev_mapping_table *mt_entry = &sc->mapping_table[start_idx];
        u16 volume_mapping_flags;

        volume_mapping_flags = le16toh(sc->ioc_pg8.IRVolumeMappingFlags) &
            MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
        if (sc->ir_firmware && (volume_mapping_flags ==
            MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING))
                max_idx -= sc->max_volumes;

        for (map_idx  = start_idx; map_idx < max_idx; map_idx++, mt_entry++)
                if (!(mt_entry->device_info & (MPR_MAP_IN_USE |
                    MPR_DEV_RESERVED)))
                        return map_idx;

        return MPR_MAPTABLE_BAD_IDX;
}

/**
 * _mapping_get_dpm_idx_from_id - get DPM index from ID
 * @sc: per adapter object
 * @id: volume WWID or enclosure ID or device ID
 *
 * Returns the index of DPM entry on success or bad index.
 */
static u16
_mapping_get_dpm_idx_from_id(struct mpr_softc *sc, u64 id, u32 phy_bits)
{
        u16 entry_num;
        uint64_t PhysicalIdentifier;
        Mpi2DriverMap0Entry_t *dpm_entry;

        dpm_entry = (Mpi2DriverMap0Entry_t *)((u8 *)sc->dpm_pg0 +
            sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
        PhysicalIdentifier = dpm_entry->PhysicalIdentifier.High;
        PhysicalIdentifier = (PhysicalIdentifier << 32) | 
            dpm_entry->PhysicalIdentifier.Low;
        for (entry_num = 0; entry_num < sc->max_dpm_entries; entry_num++,
            dpm_entry++)
                if ((id == PhysicalIdentifier) &&
                    (!phy_bits || !dpm_entry->PhysicalBitsMapping ||
                    (phy_bits & dpm_entry->PhysicalBitsMapping)))
                        return entry_num;

        return MPR_DPM_BAD_IDX;
}


/**
 * _mapping_get_free_dpm_idx - get first available DPM index
 * @sc: per adapter object
 *
 * Returns the index of DPM entry on success or bad index.
 */
static u32
_mapping_get_free_dpm_idx(struct mpr_softc *sc)
{
        u16 entry_num;
        Mpi2DriverMap0Entry_t *dpm_entry;
        u16 current_entry = MPR_DPM_BAD_IDX, missing_cnt, high_missing_cnt = 0;
        u64 physical_id;
        struct dev_mapping_table *mt_entry;
        u32 map_idx;

        for (entry_num = 0; entry_num < sc->max_dpm_entries; entry_num++) {
                dpm_entry = (Mpi2DriverMap0Entry_t *) ((u8 *)sc->dpm_pg0 +
                    sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
                dpm_entry += entry_num;
                missing_cnt = dpm_entry->MappingInformation &
                    MPI2_DRVMAP0_MAPINFO_MISSING_MASK;

                /*
                 * If entry is used and not missing, then this entry can't be
                 * used. Look at next one.
                 */
                if (sc->dpm_entry_used[entry_num] && !missing_cnt)
                        continue;

                /*
                 * If this entry is not used at all, then the missing count
                 * doesn't matter. Just use this one. Otherwise, keep looking
                 * and make sure the entry with the highest missing count is
                 * used.
                 */
                if (!sc->dpm_entry_used[entry_num]) {
                        current_entry = entry_num;
                        break;
                }
                if ((current_entry == MPR_DPM_BAD_IDX) ||
                    (missing_cnt > high_missing_cnt)) {
                        current_entry = entry_num;
                        high_missing_cnt = missing_cnt;
                }
        }

        /*
         * If an entry has been found to use and it's already marked as used
         * it means that some device was already using this entry but it's
         * missing, and that means that the connection between the missing
         * device's DPM entry and the mapping table needs to be cleared. To do
         * this, use the Physical ID of the old device still in the DPM entry
         * to find its mapping table entry, then mark its DPM entry as BAD.
         */
        if ((current_entry != MPR_DPM_BAD_IDX) &&
            sc->dpm_entry_used[current_entry]) {
                dpm_entry = (Mpi2DriverMap0Entry_t *) ((u8 *)sc->dpm_pg0 +
                    sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
                dpm_entry += current_entry;
                physical_id = dpm_entry->PhysicalIdentifier.High;
                physical_id = (physical_id << 32) |
                    dpm_entry->PhysicalIdentifier.Low;
                map_idx = _mapping_get_mt_idx_from_id(sc, physical_id);
                if (map_idx != MPR_MAPTABLE_BAD_IDX) {
                        mt_entry = &sc->mapping_table[map_idx];
                        mt_entry->dpm_entry_num = MPR_DPM_BAD_IDX;
                }
        }
        return current_entry;
}

/**
 * _mapping_update_ir_missing_cnt - Updates missing count for a volume
 * @sc: per adapter object
 * @map_idx: map table index of the volume
 * @element: IR configuration change element
 * @wwid: IR volume ID.
 *
 * Updates the missing count in the map table and in the DPM entry for a volume
 *
 * Returns nothing.
 */
static void
_mapping_update_ir_missing_cnt(struct mpr_softc *sc, u32 map_idx,
    Mpi2EventIrConfigElement_t *element, u64 wwid)
{
        struct dev_mapping_table *mt_entry;
        u8 missing_cnt, reason = element->ReasonCode, update_dpm = 1;
        u16 dpm_idx;
        Mpi2DriverMap0Entry_t *dpm_entry;

        /*
         * Depending on the reason code, update the missing count. Always set
         * the init_complete flag when here, so just do it first. That flag is
         * used for volumes to make sure that the DPM entry has been updated.
         * When a volume is deleted, clear the map entry's IN_USE flag so that
         * the entry can be used again if another volume is created. Also clear
         * its dev_handle entry so that other functions can't find this volume
         * by the handle, since it's not defined any longer.
         */
        mt_entry = &sc->mapping_table[map_idx];
        mt_entry->init_complete = 1;
        if ((reason == MPI2_EVENT_IR_CHANGE_RC_ADDED) ||
            (reason == MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED)) {
                mt_entry->missing_count = 0;
        } else if (reason == MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED) {
                if (mt_entry->missing_count < MPR_MAX_MISSING_COUNT)
                        mt_entry->missing_count++;

                mt_entry->device_info &= ~MPR_MAP_IN_USE;
                mt_entry->dev_handle = 0;
        }

        /*
         * If persistent mapping is enabled, update the DPM with the new missing
         * count for the volume. If the DPM index is bad, get a free one. If
         * it's bad for a volume that's being deleted do nothing because that
         * volume doesn't have a DPM entry. 
         */
        if (!sc->is_dpm_enable)
                return;
        dpm_idx = mt_entry->dpm_entry_num;
        if (dpm_idx == MPR_DPM_BAD_IDX) {
                if (reason == MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED)
                {
                        mpr_dprint(sc, MPR_MAPPING, "%s: Volume being deleted "
                            "is not in DPM so DPM missing count will not be "
                            "updated.\n", __func__);
                        return;
                }
        }
        if (dpm_idx == MPR_DPM_BAD_IDX)
                dpm_idx = _mapping_get_free_dpm_idx(sc);

        /*
         * Got the DPM entry for the volume or found a free DPM entry if this is
         * a new volume. Check if the current information is outdated.
         */
        if (dpm_idx != MPR_DPM_BAD_IDX) {
                dpm_entry = (Mpi2DriverMap0Entry_t *)((u8 *)sc->dpm_pg0 +
                    sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
                dpm_entry += dpm_idx;
                missing_cnt = dpm_entry->MappingInformation &
                    MPI2_DRVMAP0_MAPINFO_MISSING_MASK;
                if ((mt_entry->physical_id ==
                    le64toh(((u64)dpm_entry->PhysicalIdentifier.High << 32) |
                    (u64)dpm_entry->PhysicalIdentifier.Low)) && (missing_cnt ==
                    mt_entry->missing_count)) {
                        mpr_dprint(sc, MPR_MAPPING, "%s: DPM entry for volume "
                           "with target ID %d does not require an update.\n",
                            __func__, mt_entry->id);
                        update_dpm = 0;
                }
        }

        /*
         * Update the volume's persistent info if it's new or the ID or missing
         * count has changed. If a good DPM index has not been found by now,
         * there is no space left in the DPM table.
         */
        if ((dpm_idx != MPR_DPM_BAD_IDX) && update_dpm) {
                mpr_dprint(sc, MPR_MAPPING, "%s: Update DPM entry for volume "
                    "with target ID %d.\n", __func__, mt_entry->id);
                mt_entry->dpm_entry_num = dpm_idx;
                dpm_entry = (Mpi2DriverMap0Entry_t *)((u8 *)sc->dpm_pg0 +
                    sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
                dpm_entry += dpm_idx;
                dpm_entry->PhysicalIdentifier.Low =
                    (0xFFFFFFFF & mt_entry->physical_id);
                dpm_entry->PhysicalIdentifier.High =
                    (mt_entry->physical_id >> 32);
                dpm_entry->DeviceIndex = map_idx;
                dpm_entry->MappingInformation = mt_entry->missing_count;
                dpm_entry->PhysicalBitsMapping = 0;
                dpm_entry->Reserved1 = 0;
                sc->dpm_flush_entry[dpm_idx] = 1;
                sc->dpm_entry_used[dpm_idx] = 1;
        } else if (dpm_idx == MPR_DPM_BAD_IDX) {
                mpr_dprint(sc, MPR_INFO | MPR_MAPPING, "%s: No space to add an "
                    "entry in the DPM table for volume with target ID %d.\n",
                    __func__, mt_entry->id);
        }
}

/**
 * _mapping_add_to_removal_table - add DPM index to the removal table
 * @sc: per adapter object
 * @dpm_idx: Index of DPM entry to remove
 *
 * Adds a DPM entry number to the removal table.
 *
 * Returns nothing.
 */
static void
_mapping_add_to_removal_table(struct mpr_softc *sc, u16 dpm_idx)
{
        struct map_removal_table *remove_entry;
        u32 i;

        /*
         * This is only used to remove entries from the DPM in the controller.
         * If DPM is not enabled, just return.
         */
        if (!sc->is_dpm_enable)
                return;

        /*
         * Find the first available removal_table entry and add the new entry
         * there.
         */
        remove_entry = sc->removal_table;
        for (i = 0; i < sc->max_devices; i++, remove_entry++) {
                if (remove_entry->dpm_entry_num != MPR_DPM_BAD_IDX)
                        continue;
 
                mpr_dprint(sc, MPR_MAPPING, "%s: Adding DPM entry %d to table "
                    "for removal.\n", __func__, dpm_idx);
                remove_entry->dpm_entry_num = dpm_idx;
                break;
        }

}

/**
 * _mapping_inc_missing_count
 * @sc: per adapter object
 * @map_idx: index into the mapping table for the device that is missing 
 *
 * Increment the missing count in the mapping table for a SAS, SATA, or PCIe
 * device that is not responding. If Persitent Mapping is used, increment the
 * DPM entry as well. Currently, this function is only called if the target
 * goes missing, so after initialization has completed. This means that the
 * missing count can only go from 0 to 1 here. The missing count is incremented
 * during initialization as well, so that's where a target's missing count can
 * go past 1.
 *
 * Returns nothing.
 */
static void
_mapping_inc_missing_count(struct mpr_softc *sc, u32 map_idx)
{
        u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
        struct dev_mapping_table *mt_entry;
        Mpi2DriverMap0Entry_t *dpm_entry;

        if (map_idx == MPR_MAPTABLE_BAD_IDX) {
                mpr_dprint(sc, MPR_INFO | MPR_MAPPING, "%s: device is already "
                    "removed from mapping table\n", __func__);
                return;
        }
        mt_entry = &sc->mapping_table[map_idx];
        if (mt_entry->missing_count < MPR_MAX_MISSING_COUNT)
                mt_entry->missing_count++;

        /*
         * When using Enc/Slot mapping, when a device is removed, it's mapping
         * table information should be cleared. Otherwise, the target ID will
         * be incorrect if this same device is re-added to a different slot.
         */
        if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
            MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) {
                _mapping_clear_map_entry(mt_entry);
        }

        /*
         * When using device mapping, update the missing count in the DPM entry,
         * but only if the missing count has changed.
         */
        if (((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
            MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING) &&
            sc->is_dpm_enable &&
            mt_entry->dpm_entry_num != MPR_DPM_BAD_IDX) {
                dpm_entry = (Mpi2DriverMap0Entry_t *) ((u8 *)sc->dpm_pg0 +
                    sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
                dpm_entry += mt_entry->dpm_entry_num;
                if (dpm_entry->MappingInformation != mt_entry->missing_count) {
                        dpm_entry->MappingInformation = mt_entry->missing_count;
                        sc->dpm_flush_entry[mt_entry->dpm_entry_num] = 1;
                }
        }
}

/**
 * _mapping_update_missing_count - Update missing count for a device
 * @sc: per adapter object
 * @topo_change: Topology change event entry
 *
 * Search through the topology change list and if any device is found not
 * responding it's associated map table entry and DPM entry is updated
 *
 * Returns nothing.
 */
static void
_mapping_update_missing_count(struct mpr_softc *sc,
    struct _map_topology_change *topo_change)
{
        u8 entry;
        struct _map_phy_change *phy_change;
        u32 map_idx;

        for (entry = 0; entry < topo_change->num_entries; entry++) {
                phy_change = &topo_change->phy_details[entry];
                if (!phy_change->dev_handle || (phy_change->reason !=
                    MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING))
                        continue;
                map_idx = _mapping_get_mt_idx_from_handle(sc, phy_change->
                    dev_handle);
                phy_change->is_processed = 1;
                _mapping_inc_missing_count(sc, map_idx);
        }
}

/**
 * _mapping_update_pcie_missing_count - Update missing count for a PCIe device
 * @sc: per adapter object
 * @topo_change: Topology change event entry
 *
 * Search through the PCIe topology change list and if any device is found not
 * responding it's associated map table entry and DPM entry is updated
 *
 * Returns nothing.
 */
static void
_mapping_update_pcie_missing_count(struct mpr_softc *sc,
    struct _map_pcie_topology_change *topo_change)
{
        u8 entry;
        struct _map_port_change *port_change;
        u32 map_idx;

        for (entry = 0; entry < topo_change->num_entries; entry++) {
                port_change = &topo_change->port_details[entry];
                if (!port_change->dev_handle || (port_change->reason !=
                    MPI26_EVENT_PCIE_TOPO_PS_NOT_RESPONDING))
                        continue;
                map_idx = _mapping_get_mt_idx_from_handle(sc, port_change->
                    dev_handle);
                port_change->is_processed = 1;
                _mapping_inc_missing_count(sc, map_idx);
        }
}

/**
 * _mapping_find_enc_map_space -find map table entries for enclosure
 * @sc: per adapter object
 * @et_entry: enclosure entry
 *
 * Search through the mapping table defragment it and provide contiguous
 * space in map table for a particular enclosure entry
 *
 * Returns start index in map table or bad index.
 */
static u32
_mapping_find_enc_map_space(struct mpr_softc *sc,
    struct enc_mapping_table *et_entry)
{
        u16 vol_mapping_flags;
        u32 skip_count, end_of_table, map_idx, enc_idx;
        u16 num_found;
        u32 start_idx = MPR_MAPTABLE_BAD_IDX;
        struct dev_mapping_table *mt_entry;
        struct enc_mapping_table *enc_entry;
        unsigned char done_flag = 0, found_space;
        u16 max_num_phy_ids = le16toh(sc->ioc_pg8.MaxNumPhysicalMappedIDs);

        skip_count = sc->num_rsvd_entries;
        num_found = 0;

        vol_mapping_flags = le16toh(sc->ioc_pg8.IRVolumeMappingFlags) &
            MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;

        /*
         * The end of the mapping table depends on where volumes are kept, if
         * IR is enabled.
         */
        if (!sc->ir_firmware)
                end_of_table = sc->max_devices;
        else if (vol_mapping_flags == MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING)
                end_of_table = sc->max_devices;
        else
                end_of_table = sc->max_devices - sc->max_volumes;

        /*
         * The skip_count is the number of entries that are reserved at the
         * beginning of the mapping table. But, it does not include the number
         * of Physical IDs that are reserved for direct attached devices. Look
         * through the mapping table after these reserved entries to see if 
         * the devices for this enclosure are already mapped. The PHY bit check
         * is used to make sure that at least one PHY bit is common between the
         * enclosure and the device that is already mapped.
         */
        mpr_dprint(sc, MPR_MAPPING, "%s: Looking for space in the mapping "
            "table for added enclosure.\n", __func__);
        for (map_idx = (max_num_phy_ids + skip_count);
            map_idx < end_of_table; map_idx++) {
                mt_entry = &sc->mapping_table[map_idx];
                if ((et_entry->enclosure_id == mt_entry->physical_id) &&
                    (!mt_entry->phy_bits || (mt_entry->phy_bits &
                    et_entry->phy_bits))) {
                        num_found += 1;
                        if (num_found == et_entry->num_slots) {
                                start_idx = (map_idx - num_found) + 1;
                                mpr_dprint(sc, MPR_MAPPING, "%s: Found space "
                                    "in the mapping for enclosure at map index "
                                    "%d.\n", __func__, start_idx);
                                return start_idx;
                        }
                } else
                        num_found = 0;
        }

        /*
         * If the enclosure's devices are not mapped already, look for
         * contiguous entries in the mapping table that are not reserved. If
         * enough entries are found, return the starting index for that space.
         */
        num_found = 0;
        for (map_idx = (max_num_phy_ids + skip_count);
            map_idx < end_of_table; map_idx++) {
                mt_entry = &sc->mapping_table[map_idx];
                if (!(mt_entry->device_info & MPR_DEV_RESERVED)) {
                        num_found += 1;
                        if (num_found == et_entry->num_slots) {
                                start_idx = (map_idx - num_found) + 1;
                                mpr_dprint(sc, MPR_MAPPING, "%s: Found space "
                                    "in the mapping for enclosure at map index "
                                    "%d.\n", __func__, start_idx);
                                return start_idx;
                        }
                } else
                        num_found = 0;
        }

        /*
         * If here, it means that not enough space in the mapping table was
         * found to support this enclosure, so go through the enclosure table to
         * see if any enclosure entries have a missing count. If so, get the
         * enclosure with the highest missing count and check it to see if there
         * is enough space for the new enclosure.
         */
        while (!done_flag) {
                enc_idx = _mapping_get_high_missing_et_idx(sc);
                if (enc_idx == MPR_ENCTABLE_BAD_IDX) {
                        mpr_dprint(sc, MPR_MAPPING, "%s: Not enough space was "
                            "found in the mapping for the added enclosure.\n",
                            __func__);
                        return MPR_MAPTABLE_BAD_IDX;
                }

                /*
                 * Found a missing enclosure. Set the skip_search flag so this
                 * enclosure is not checked again for a high missing count if
                 * the loop continues. This way, all missing enclosures can
                 * have their space added together to find enough space in the
                 * mapping table for the added enclosure. The space must be
                 * contiguous.
                 */
                mpr_dprint(sc, MPR_MAPPING, "%s: Space from a missing "
                    "enclosure was found.\n", __func__);
                enc_entry = &sc->enclosure_table[enc_idx];
                enc_entry->skip_search = 1;

                /*
                 * Unmark all of the missing enclosure's device's reserved
                 * space. These will be remarked as reserved if this missing
                 * enclosure's space is not used.
                 */
                mpr_dprint(sc, MPR_MAPPING, "%s: Clear the reserved flag for "
                    "all of the map entries for the enclosure.\n", __func__);
                mt_entry = &sc->mapping_table[enc_entry->start_index];
                for (map_idx = enc_entry->start_index; map_idx <
                    (enc_entry->start_index + enc_entry->num_slots); map_idx++,
                    mt_entry++)
                        mt_entry->device_info &= ~MPR_DEV_RESERVED;

                /*
                 * Now that space has been unreserved, check again to see if
                 * enough space is available for the new enclosure.
                 */
                mpr_dprint(sc, MPR_MAPPING, "%s: Check if new mapping space is "
                    "enough for the new enclosure.\n", __func__);
                found_space = 0;
                num_found = 0;
                for (map_idx = (max_num_phy_ids + skip_count);
                    map_idx < end_of_table; map_idx++) {
                        mt_entry = &sc->mapping_table[map_idx];
                        if (!(mt_entry->device_info & MPR_DEV_RESERVED)) {
                                num_found += 1;
                                if (num_found == et_entry->num_slots) {
                                        start_idx = (map_idx - num_found) + 1;
                                        found_space = 1;
                                        break;
                                }
                        } else
                                num_found = 0;
                }
                if (!found_space)
                        continue;

                /*
                 * If enough space was found, all of the missing enclosures that
                 * will be used for the new enclosure must be added to the
                 * removal table. Then all mappings for the enclosure's devices
                 * and for the enclosure itself need to be cleared. There may be
                 * more than one enclosure to add to the removal table and
                 * clear.
                 */
                mpr_dprint(sc, MPR_MAPPING, "%s: Found space in the mapping "
                    "for enclosure at map index %d.\n", __func__, start_idx);
                for (map_idx = start_idx; map_idx < (start_idx + num_found);
                    map_idx++) {
                        enc_entry = sc->enclosure_table;
                        for (enc_idx = 0; enc_idx < sc->num_enc_table_entries;
                            enc_idx++, enc_entry++) {
                                if (map_idx < enc_entry->start_index ||
                                    map_idx > (enc_entry->start_index +
                                    enc_entry->num_slots))
                                        continue;
                                if (!enc_entry->removal_flag) {
                                        mpr_dprint(sc, MPR_MAPPING, "%s: "
                                            "Enclosure %d will be removed from "
                                            "the mapping table.\n", __func__,
                                            enc_idx);
                                        enc_entry->removal_flag = 1;
                                        _mapping_add_to_removal_table(sc,
                                            enc_entry->dpm_entry_num);
                                }
                                mt_entry = &sc->mapping_table[map_idx];
                                _mapping_clear_map_entry(mt_entry);
                                if (map_idx == (enc_entry->start_index +
                                    enc_entry->num_slots - 1))
                                        _mapping_clear_enc_entry(et_entry);
                        }
                }

                /*
                 * During the search for space for this enclosure, some entries
                 * in the mapping table may have been unreserved. Go back and
                 * change all of these to reserved again. Only the enclosures
                 * with the removal_flag set should be left as unreserved. The
                 * skip_search flag needs to be cleared as well so that the
                 * enclosure's space will be looked at the next time space is
                 * needed.
                 */ 
                enc_entry = sc->enclosure_table;
                for (enc_idx = 0; enc_idx < sc->num_enc_table_entries;
                    enc_idx++, enc_entry++) {
                        if (!enc_entry->removal_flag) {
                                mpr_dprint(sc, MPR_MAPPING, "%s: Reset the "
                                    "reserved flag for all of the map entries "
                                    "for enclosure %d.\n", __func__, enc_idx);
                                mt_entry = &sc->mapping_table[enc_entry->
                                    start_index];
                                for (map_idx = enc_entry->start_index; map_idx <
                                    (enc_entry->start_index +
                                    enc_entry->num_slots); map_idx++,
                                    mt_entry++)
                                        mt_entry->device_info |=
                                            MPR_DEV_RESERVED;
                                et_entry->skip_search = 0;
                        }
                }
                done_flag = 1;
        }
        return start_idx;
}

/**
 * _mapping_get_dev_info -get information about newly added devices
 * @sc: per adapter object
 * @topo_change: Topology change event entry
 *
 * Search through the topology change event list and issues sas device pg0
 * requests for the newly added device and reserved entries in tables
 *
 * Returns nothing
 */
static void
_mapping_get_dev_info(struct mpr_softc *sc,
    struct _map_topology_change *topo_change)
{
        u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
        Mpi2ConfigReply_t mpi_reply;
        Mpi2SasDevicePage0_t sas_device_pg0;
        u8 entry, enc_idx, phy_idx;
        u32 map_idx, index, device_info;
        struct _map_phy_change *phy_change, *tmp_phy_change;
        uint64_t sas_address;
        struct enc_mapping_table *et_entry;
        struct dev_mapping_table *mt_entry;
        u8 add_code = MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED;
        int rc = 1;

        for (entry = 0; entry < topo_change->num_entries; entry++) {
                phy_change = &topo_change->phy_details[entry];
                if (phy_change->is_processed || !phy_change->dev_handle ||
                    phy_change->reason != MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED)
                        continue;

                if (mpr_config_get_sas_device_pg0(sc, &mpi_reply,
                    &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
                    phy_change->dev_handle)) {
                        phy_change->is_processed = 1;
                        continue;
                }

                /*
                 * Always get SATA Identify information because this is used
                 * to determine if Start/Stop Unit should be sent to the drive
                 * when the system is shutdown.
                 */
                device_info = le32toh(sas_device_pg0.DeviceInfo);
                sas_address = le32toh(sas_device_pg0.SASAddress.High);
                sas_address = (sas_address << 32) |
                    le32toh(sas_device_pg0.SASAddress.Low);
                if ((device_info & MPI2_SAS_DEVICE_INFO_END_DEVICE) &&
                    (device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE)) {
                        rc = mprsas_get_sas_address_for_sata_disk(sc,
                            &sas_address, phy_change->dev_handle, device_info,
                            &phy_change->is_SATA_SSD);
                        if (rc) {
                                mpr_dprint(sc, MPR_ERROR, "%s: failed to get "
                                    "disk type (SSD or HDD) and SAS Address "
                                    "for SATA device with handle 0x%04x\n",
                                    __func__, phy_change->dev_handle);
                        }
                }

                phy_change->physical_id = sas_address;
                phy_change->slot = le16toh(sas_device_pg0.Slot);
                phy_change->device_info = device_info;

                /*
                 * When using Enc/Slot mapping, if this device is an enclosure
                 * make sure that all of its slots can fit into the mapping
                 * table.
                 */
                if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
                    MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) {
                        /*
                         * The enclosure should already be in the enclosure
                         * table due to the Enclosure Add event. If not, just
                         * continue, nothing can be done.
                         */
                        enc_idx = _mapping_get_enc_idx_from_handle(sc,
                            topo_change->enc_handle);
                        if (enc_idx == MPR_ENCTABLE_BAD_IDX) {
                                phy_change->is_processed = 1;
                                mpr_dprint(sc, MPR_ERROR | MPR_MAPPING, "%s: "
                                    "failed to add the device with handle "
                                    "0x%04x because the enclosure is not in "
                                    "the mapping table\n", __func__,
                                    phy_change->dev_handle);
                                continue;
                        }
                        if (!((phy_change->device_info &
                            MPI2_SAS_DEVICE_INFO_END_DEVICE) &&
                            (phy_change->device_info &
                            (MPI2_SAS_DEVICE_INFO_SSP_TARGET |
                            MPI2_SAS_DEVICE_INFO_STP_TARGET |
                            MPI2_SAS_DEVICE_INFO_SATA_DEVICE)))) {
                                phy_change->is_processed = 1;
                                continue;
                        }
                        et_entry = &sc->enclosure_table[enc_idx];

                        /*
                         * If the enclosure already has a start_index, it's been
                         * mapped, so go to the next Topo change.
                         */
                        if (et_entry->start_index != MPR_MAPTABLE_BAD_IDX)
                                continue;

                        /*
                         * If the Expander Handle is 0, the devices are direct
                         * attached. In that case, the start_index must be just 
                         * after the reserved entries. Otherwise, find space in
                         * the mapping table for the enclosure's devices.
                         */ 
                        if (!topo_change->exp_handle) {
                                map_idx = sc->num_rsvd_entries;
                                et_entry->start_index = map_idx;
                        } else {
                                map_idx = _mapping_find_enc_map_space(sc,
                                    et_entry);
                                et_entry->start_index = map_idx;

                                /*
                                 * If space cannot be found to hold all of the
                                 * enclosure's devices in the mapping table,
                                 * there's no need to continue checking the
                                 * other devices in this event. Set all of the
                                 * phy_details for this event (if the change is
                                 * for an add) as already processed because none
                                 * of these devices can be added to the mapping
                                 * table.
                                 */
                                if (et_entry->start_index ==
                                    MPR_MAPTABLE_BAD_IDX) {
                                        mpr_dprint(sc, MPR_ERROR | MPR_MAPPING,
                                            "%s: failed to add the enclosure "
                                            "with ID 0x%016jx because there is "
                                            "no free space available in the "
                                            "mapping table for all of the "
                                            "enclosure's devices.\n", __func__,
                                            (uintmax_t)et_entry->enclosure_id);
                                        phy_change->is_processed = 1;
                                        for (phy_idx = 0; phy_idx <
                                            topo_change->num_entries;
                                            phy_idx++) {
                                                tmp_phy_change =
                                                    &topo_change->phy_details
                                                    [phy_idx];
                                                if (tmp_phy_change->reason ==
                                                    add_code)
                                                        tmp_phy_change->
                                                            is_processed = 1;
                                        }
                                        break;
                                }
                        }

                        /*
                         * Found space in the mapping table for this enclosure.
                         * Initialize each mapping table entry for the
                         * enclosure.
                         */
                        mpr_dprint(sc, MPR_MAPPING, "%s: Initialize %d map "
                            "entries for the enclosure, starting at map index "
                            " %d.\n", __func__, et_entry->num_slots, map_idx);
                        mt_entry = &sc->mapping_table[map_idx];
                        for (index = map_idx; index < (et_entry->num_slots
                            + map_idx); index++, mt_entry++) {
                                mt_entry->device_info = MPR_DEV_RESERVED;
                                mt_entry->physical_id = et_entry->enclosure_id;
                                mt_entry->phy_bits = et_entry->phy_bits;
                                mt_entry->missing_count = 0;
                        }
                }
        }
}

/**
 * _mapping_get_pcie_dev_info -get information about newly added PCIe devices
 * @sc: per adapter object
 * @topo_change: Topology change event entry
 *
 * Searches through the PCIe topology change event list and issues PCIe device
 * pg0 requests for the newly added PCIe device. If the device is in an
 * enclosure, search for available space in the enclosure mapping table for the
 * device and reserve that space.
 *
 * Returns nothing
 */
static void
_mapping_get_pcie_dev_info(struct mpr_softc *sc,
    struct _map_pcie_topology_change *topo_change)
{
        u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
        Mpi2ConfigReply_t mpi_reply;
        Mpi26PCIeDevicePage0_t pcie_device_pg0;
        u8 entry, enc_idx, port_idx;
        u32 map_idx, index;
        struct _map_port_change *port_change, *tmp_port_change;
        uint64_t pcie_wwid;
        struct enc_mapping_table *et_entry;
        struct dev_mapping_table *mt_entry;
        u8 add_code = MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED;

        for (entry = 0; entry < topo_change->num_entries; entry++) {
                port_change = &topo_change->port_details[entry];
                if (port_change->is_processed || !port_change->dev_handle ||
                    port_change->reason != MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED)
                        continue;
                if (mpr_config_get_pcie_device_pg0(sc, &mpi_reply,
                    &pcie_device_pg0, MPI26_PCIE_DEVICE_PGAD_FORM_HANDLE,
                    port_change->dev_handle)) {
                        port_change->is_processed = 1;
                        continue;
                }

                pcie_wwid = pcie_device_pg0.WWID.High;
                pcie_wwid = (pcie_wwid << 32) | pcie_device_pg0.WWID.Low;
                port_change->physical_id = pcie_wwid;
                port_change->slot = le16toh(pcie_device_pg0.Slot);
                port_change->device_info = le32toh(pcie_device_pg0.DeviceInfo);

                /*
                 * When using Enc/Slot mapping, if this device is an enclosure
                 * make sure that all of its slots can fit into the mapping
                 * table.
                 */
                if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
                    MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) {
                        /*
                         * The enclosure should already be in the enclosure
                         * table due to the Enclosure Add event. If not, just
                         * continue, nothing can be done.
                         */
                        enc_idx = _mapping_get_enc_idx_from_handle(sc,
                            topo_change->enc_handle);
                        if (enc_idx == MPR_ENCTABLE_BAD_IDX) {
                                port_change->is_processed = 1;
                                mpr_dprint(sc, MPR_ERROR | MPR_MAPPING, "%s: "
                                    "failed to add the device with handle "
                                    "0x%04x because the enclosure is not in "
                                    "the mapping table\n", __func__,
                                    port_change->dev_handle);
                                continue;
                        }
                        if (!(port_change->device_info &
                            MPI26_PCIE_DEVINFO_NVME)) {
                                port_change->is_processed = 1;
                                continue;
                        }
                        et_entry = &sc->enclosure_table[enc_idx];

                        /*
                         * If the enclosure already has a start_index, it's been
                         * mapped, so go to the next Topo change.
                         */
                        if (et_entry->start_index != MPR_MAPTABLE_BAD_IDX)
                                continue;

                        /*
                         * If the Switch Handle is 0, the devices are direct
                         * attached. In that case, the start_index must be just 
                         * after the reserved entries. Otherwise, find space in
                         * the mapping table for the enclosure's devices.
                         */ 
                        if (!topo_change->switch_dev_handle) {
                                map_idx = sc->num_rsvd_entries;
                                et_entry->start_index = map_idx;
                        } else {
                                map_idx = _mapping_find_enc_map_space(sc,
                                    et_entry);
                                et_entry->start_index = map_idx;

                                /*
                                 * If space cannot be found to hold all of the
                                 * enclosure's devices in the mapping table,
                                 * there's no need to continue checking the
                                 * other devices in this event. Set all of the
                                 * port_details for this event (if the change is
                                 * for an add) as already processed because none
                                 * of these devices can be added to the mapping
                                 * table.
                                 */
                                if (et_entry->start_index ==
                                    MPR_MAPTABLE_BAD_IDX) {
                                        mpr_dprint(sc, MPR_ERROR | MPR_MAPPING,
                                            "%s: failed to add the enclosure "
                                            "with ID 0x%016jx because there is "
                                            "no free space available in the "
                                            "mapping table for all of the "
                                            "enclosure's devices.\n", __func__,
                                            (uintmax_t)et_entry->enclosure_id);
                                        port_change->is_processed = 1;
                                        for (port_idx = 0; port_idx <
                                            topo_change->num_entries;
                                            port_idx++) {
                                                tmp_port_change =
                                                    &topo_change->port_details
                                                    [port_idx];
                                                if (tmp_port_change->reason ==
                                                    add_code)
                                                        tmp_port_change->
                                                            is_processed = 1;
                                        }
                                        break;
                                }
                        }

                        /*
                         * Found space in the mapping table for this enclosure.
                         * Initialize each mapping table entry for the
                         * enclosure.
                         */
                        mpr_dprint(sc, MPR_MAPPING, "%s: Initialize %d map "
                            "entries for the enclosure, starting at map index "
                            " %d.\n", __func__, et_entry->num_slots, map_idx);
                        mt_entry = &sc->mapping_table[map_idx];
                        for (index = map_idx; index < (et_entry->num_slots
                            + map_idx); index++, mt_entry++) {
                                mt_entry->device_info = MPR_DEV_RESERVED;
                                mt_entry->physical_id = et_entry->enclosure_id;
                                mt_entry->phy_bits = et_entry->phy_bits;
                                mt_entry->missing_count = 0;
                        }
                }
        }
}

/**
 * _mapping_set_mid_to_eid -set map table data from enclosure table
 * @sc: per adapter object
 * @et_entry: enclosure entry
 *
 * Returns nothing
 */
static inline void
_mapping_set_mid_to_eid(struct mpr_softc *sc,
    struct enc_mapping_table *et_entry)
{
        struct dev_mapping_table *mt_entry;
        u16 slots = et_entry->num_slots, map_idx;
        u32 start_idx = et_entry->start_index;

        if (start_idx != MPR_MAPTABLE_BAD_IDX) {
                mt_entry = &sc->mapping_table[start_idx];
                for (map_idx = 0; map_idx < slots; map_idx++, mt_entry++)
                        mt_entry->physical_id = et_entry->enclosure_id;
        }
}

/**
 * _mapping_clear_removed_entries - mark the entries to be cleared
 * @sc: per adapter object
 *
 * Search through the removal table and mark the entries which needs to be
 * flushed to DPM and also updates the map table and enclosure table by
 * clearing the corresponding entries.
 *
 * Returns nothing
 */
static void
_mapping_clear_removed_entries(struct mpr_softc *sc)
{
        u32 remove_idx;
        struct map_removal_table *remove_entry;
        Mpi2DriverMap0Entry_t *dpm_entry;
        u8 done_flag = 0, num_entries, m, i;
        struct enc_mapping_table *et_entry, *from, *to;
        u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);

        if (sc->is_dpm_enable) {
                remove_entry = sc->removal_table;
                for (remove_idx = 0; remove_idx < sc->max_devices;
                    remove_idx++, remove_entry++) {
                        if (remove_entry->dpm_entry_num != MPR_DPM_BAD_IDX) {
                                dpm_entry = (Mpi2DriverMap0Entry_t *)
                                    ((u8 *) sc->dpm_pg0 +
                                    sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
                                dpm_entry += remove_entry->dpm_entry_num;
                                dpm_entry->PhysicalIdentifier.Low = 0;
                                dpm_entry->PhysicalIdentifier.High = 0;
                                dpm_entry->DeviceIndex = 0;
                                dpm_entry->MappingInformation = 0;
                                dpm_entry->PhysicalBitsMapping = 0;
                                sc->dpm_flush_entry[remove_entry->
                                    dpm_entry_num] = 1;
                                sc->dpm_entry_used[remove_entry->dpm_entry_num]
                                    = 0;
                                remove_entry->dpm_entry_num = MPR_DPM_BAD_IDX;
                        }
                }
        }

        /*
         * When using Enc/Slot mapping, if a new enclosure was added and old
         * enclosure space was needed, the enclosure table may now have gaps
         * that need to be closed. All enclosure mappings need to be contiguous
         * so that space can be reused correctly if available.
         */
        if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
            MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) {
                num_entries = sc->num_enc_table_entries;
                while (!done_flag) {
                        done_flag = 1;
                        et_entry = sc->enclosure_table;
                        for (i = 0; i < num_entries; i++, et_entry++) {
                                if (!et_entry->enc_handle && et_entry->
                                    init_complete) {
                                        done_flag = 0;
                                        if (i != (num_entries - 1)) {
                                                from = &sc->enclosure_table
                                                    [i+1];
                                                to = &sc->enclosure_table[i];
                                                for (m = i; m < (num_entries -
                                                    1); m++, from++, to++) {
                                                        _mapping_set_mid_to_eid
                                                            (sc, to);
                                                        *to = *from;
                                                }
                                                _mapping_clear_enc_entry(to);
                                                sc->num_enc_table_entries--;
                                                num_entries =
                                                    sc->num_enc_table_entries;
                                        } else {
                                                _mapping_clear_enc_entry
                                                    (et_entry);
                                                sc->num_enc_table_entries--;
                                                num_entries =
                                                    sc->num_enc_table_entries;
                                        }
                                }
                        }
                }
        }
}

/**
 * _mapping_add_new_device -Add the new device into mapping table
 * @sc: per adapter object
 * @topo_change: Topology change event entry
 *
 * Search through the topology change event list and update map table,
 * enclosure table and DPM pages for the newly added devices.
 *
 * Returns nothing
 */
static void
_mapping_add_new_device(struct mpr_softc *sc,
    struct _map_topology_change *topo_change)
{
        u8 enc_idx, missing_cnt, is_removed = 0;
        u16 dpm_idx;
        u32 search_idx, map_idx;
        u32 entry;
        struct dev_mapping_table *mt_entry;
        struct enc_mapping_table *et_entry;
        struct _map_phy_change *phy_change;
        u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
        Mpi2DriverMap0Entry_t *dpm_entry;
        uint64_t temp64_var;
        u8 map_shift = MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT;
        u8 hdr_sz = sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER);
        u16 max_num_phy_ids = le16toh(sc->ioc_pg8.MaxNumPhysicalMappedIDs);

        for (entry = 0; entry < topo_change->num_entries; entry++) {
                phy_change = &topo_change->phy_details[entry];
                if (phy_change->is_processed)
                        continue;
                if (phy_change->reason != MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED ||
                    !phy_change->dev_handle) {
                        phy_change->is_processed = 1;
                        continue;
                }
                if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
                    MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) {
                        enc_idx = _mapping_get_enc_idx_from_handle
                            (sc, topo_change->enc_handle);
                        if (enc_idx == MPR_ENCTABLE_BAD_IDX) {
                                phy_change->is_processed = 1;
                                mpr_dprint(sc, MPR_ERROR | MPR_MAPPING, "%s: "
                                    "failed to add the device with handle "
                                    "0x%04x because the enclosure is not in "
                                    "the mapping table\n", __func__,
                                    phy_change->dev_handle);
                                continue;
                        }

                        /*
                         * If the enclosure's start_index is BAD here, it means
                         * that there is no room in the mapping table to cover
                         * all of the devices that could be in the enclosure.
                         * There's no reason to process any of the devices for
                         * this enclosure since they can't be mapped.
                         */
                        et_entry = &sc->enclosure_table[enc_idx];
                        if (et_entry->start_index == MPR_MAPTABLE_BAD_IDX) {
                                phy_change->is_processed = 1;
                                mpr_dprint(sc, MPR_ERROR | MPR_MAPPING, "%s: "
                                    "failed to add the device with handle "
                                    "0x%04x because there is no free space "
                                    "available in the mapping table\n",
                                    __func__, phy_change->dev_handle);
                                continue;
                        }

                        /*
                         * Add this device to the mapping table at the correct
                         * offset where space was found to map the enclosure.
                         * Then setup the DPM entry information if being used.
                         */
                        map_idx = et_entry->start_index + phy_change->slot -
                            et_entry->start_slot;
                        mt_entry = &sc->mapping_table[map_idx];
                        mt_entry->physical_id = phy_change->physical_id;
                        mt_entry->id = map_idx;
                        mt_entry->dev_handle = phy_change->dev_handle;
                        mt_entry->missing_count = 0;
                        mt_entry->dpm_entry_num = et_entry->dpm_entry_num;
                        mt_entry->device_info = phy_change->device_info |
                            (MPR_DEV_RESERVED | MPR_MAP_IN_USE);
                        if (sc->is_dpm_enable) {
                                dpm_idx = et_entry->dpm_entry_num;
                                if (dpm_idx == MPR_DPM_BAD_IDX)
                                        dpm_idx = _mapping_get_dpm_idx_from_id
                                            (sc, et_entry->enclosure_id,
                                             et_entry->phy_bits);
                                if (dpm_idx == MPR_DPM_BAD_IDX) {
                                        dpm_idx = _mapping_get_free_dpm_idx(sc);
                                        if (dpm_idx != MPR_DPM_BAD_IDX) {
                                                dpm_entry =
                                                    (Mpi2DriverMap0Entry_t *)
                                                    ((u8 *) sc->dpm_pg0 +
                                                     hdr_sz);
                                                dpm_entry += dpm_idx;
                                                dpm_entry->
                                                    PhysicalIdentifier.Low =
                                                    (0xFFFFFFFF &
                                                    et_entry->enclosure_id);
                                                dpm_entry->
                                                    PhysicalIdentifier.High =
                                                    (et_entry->enclosure_id
                                                     >> 32);
                                                dpm_entry->DeviceIndex =
                                                    (U16)et_entry->start_index;
                                                dpm_entry->MappingInformation =
                                                    et_entry->num_slots;
                                                dpm_entry->MappingInformation
                                                    <<= map_shift;
                                                dpm_entry->PhysicalBitsMapping
                                                    = et_entry->phy_bits;
                                                et_entry->dpm_entry_num =
                                                    dpm_idx;
                                                sc->dpm_entry_used[dpm_idx] = 1;
                                                sc->dpm_flush_entry[dpm_idx] =
                                                    1;
                                                phy_change->is_processed = 1;
                                        } else {
                                                phy_change->is_processed = 1;
                                                mpr_dprint(sc, MPR_ERROR |
                                                    MPR_MAPPING, "%s: failed "
                                                    "to add the device with "
                                                    "handle 0x%04x to "
                                                    "persistent table because "
                                                    "there is no free space "
                                                    "available\n", __func__,
                                                    phy_change->dev_handle);
                                        }
                                } else {
                                        et_entry->dpm_entry_num = dpm_idx;
                                        mt_entry->dpm_entry_num = dpm_idx;
                                }
                        }
                        et_entry->init_complete = 1;
                } else if ((ioc_pg8_flags &
                    MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
                    MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING) {

                        /*
                         * Get the mapping table index for this device. If it's
                         * not in the mapping table yet, find a free entry if
                         * one is available. If there are no free entries, look
                         * for the entry that has the highest missing count. If
                         * none of that works to find an entry in the mapping
                         * table, there is a problem. Log a message and just
                         * continue on.
                         */
                        map_idx = _mapping_get_mt_idx_from_id
                            (sc, phy_change->physical_id);
                        if (map_idx == MPR_MAPTABLE_BAD_IDX) {
                                search_idx = sc->num_rsvd_entries;
                                if (topo_change->exp_handle)
                                        search_idx += max_num_phy_ids;
                                map_idx = _mapping_get_free_mt_idx(sc,
                                    search_idx);
                        }

                        /*
                         * If an entry will be used that has a missing device,
                         * clear its entry from  the DPM in the controller.
                         */
                        if (map_idx == MPR_MAPTABLE_BAD_IDX) {
                                map_idx = _mapping_get_high_missing_mt_idx(sc);
                                if (map_idx != MPR_MAPTABLE_BAD_IDX) {
                                        mt_entry = &sc->mapping_table[map_idx];
                                        _mapping_add_to_removal_table(sc,
                                            mt_entry->dpm_entry_num);
                                        is_removed = 1;
                                        mt_entry->init_complete = 0;
                                }
                        }
                        if (map_idx != MPR_MAPTABLE_BAD_IDX) {
                                mt_entry = &sc->mapping_table[map_idx];
                                mt_entry->physical_id = phy_change->physical_id;
                                mt_entry->id = map_idx;
                                mt_entry->dev_handle = phy_change->dev_handle;
                                mt_entry->missing_count = 0;
                                mt_entry->device_info = phy_change->device_info
                                    | (MPR_DEV_RESERVED | MPR_MAP_IN_USE);
                        } else {
                                phy_change->is_processed = 1;
                                mpr_dprint(sc, MPR_ERROR | MPR_MAPPING, "%s: "
                                    "failed to add the device with handle "
                                    "0x%04x because there is no free space "
                                    "available in the mapping table\n",
                                    __func__, phy_change->dev_handle);
                                continue;
                        }
                        if (sc->is_dpm_enable) {
                                if (mt_entry->dpm_entry_num !=
                                    MPR_DPM_BAD_IDX) {
                                        dpm_idx = mt_entry->dpm_entry_num;
                                        dpm_entry = (Mpi2DriverMap0Entry_t *)
                                            ((u8 *)sc->dpm_pg0 + hdr_sz);
                                        dpm_entry += dpm_idx;
                                        missing_cnt = dpm_entry->
                                            MappingInformation &
                                            MPI2_DRVMAP0_MAPINFO_MISSING_MASK;
                                        temp64_var = dpm_entry->
                                            PhysicalIdentifier.High;
                                        temp64_var = (temp64_var << 32) |
                                           dpm_entry->PhysicalIdentifier.Low;

                                        /*
                                         * If the Mapping Table's info is not
                                         * the same as the DPM entry, clear the
                                         * init_complete flag so that it's
                                         * updated.
                                         */
                                        if ((mt_entry->physical_id ==
                                            temp64_var) && !missing_cnt)
                                                mt_entry->init_complete = 1;
                                        else
                                                mt_entry->init_complete = 0;
                                } else {
                                        dpm_idx = _mapping_get_free_dpm_idx(sc);
                                        mt_entry->init_complete = 0;
                                }
                                if (dpm_idx != MPR_DPM_BAD_IDX &&
                                    !mt_entry->init_complete) {
                                        mt_entry->dpm_entry_num = dpm_idx;
                                        dpm_entry = (Mpi2DriverMap0Entry_t *)
                                            ((u8 *)sc->dpm_pg0 + hdr_sz);
                                        dpm_entry += dpm_idx;
                                        dpm_entry->PhysicalIdentifier.Low =
                                            (0xFFFFFFFF &
                                            mt_entry->physical_id);
                                        dpm_entry->PhysicalIdentifier.High =
                                            (mt_entry->physical_id >> 32);
                                        dpm_entry->DeviceIndex = (U16) map_idx;
                                        dpm_entry->MappingInformation = 0;
                                        dpm_entry->PhysicalBitsMapping = 0;
                                        sc->dpm_entry_used[dpm_idx] = 1;
                                        sc->dpm_flush_entry[dpm_idx] = 1;
                                        phy_change->is_processed = 1;
                                } else if (dpm_idx == MPR_DPM_BAD_IDX) {
                                        phy_change->is_processed = 1;
                                        mpr_dprint(sc, MPR_ERROR | MPR_MAPPING,
                                            "%s: failed to add the device with "
                                            "handle 0x%04x to persistent table "
                                            "because there is no free space "
                                            "available\n", __func__,
                                            phy_change->dev_handle);
                                }
                        }
                        mt_entry->init_complete = 1;
                }

                phy_change->is_processed = 1;
        }
        if (is_removed)
                _mapping_clear_removed_entries(sc);
}

/**
 * _mapping_add_new_pcie_device -Add the new PCIe device into mapping table
 * @sc: per adapter object
 * @topo_change: Topology change event entry
 *
 * Search through the PCIe topology change event list and update map table,
 * enclosure table and DPM pages for the newly added devices.
 *
 * Returns nothing
 */
static void
_mapping_add_new_pcie_device(struct mpr_softc *sc,
    struct _map_pcie_topology_change *topo_change)
{
        u8 enc_idx, missing_cnt, is_removed = 0;
        u16 dpm_idx;
        u32 search_idx, map_idx;
        u32 entry;
        struct dev_mapping_table *mt_entry;
        struct enc_mapping_table *et_entry;
        struct _map_port_change *port_change;
        u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
        Mpi2DriverMap0Entry_t *dpm_entry;
        uint64_t temp64_var;
        u8 map_shift = MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT;
        u8 hdr_sz = sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER);
        u16 max_num_phy_ids = le16toh(sc->ioc_pg8.MaxNumPhysicalMappedIDs);

        for (entry = 0; entry < topo_change->num_entries; entry++) {
                port_change = &topo_change->port_details[entry];
                if (port_change->is_processed)
                        continue;
                if (port_change->reason != MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED ||
                    !port_change->dev_handle) {
                        port_change->is_processed = 1;
                        continue;
                }
                if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
                    MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) {
                        enc_idx = _mapping_get_enc_idx_from_handle
                            (sc, topo_change->enc_handle);
                        if (enc_idx == MPR_ENCTABLE_BAD_IDX) {
                                port_change->is_processed = 1;
                                mpr_dprint(sc, MPR_ERROR | MPR_MAPPING, "%s: "
                                    "failed to add the device with handle "
                                    "0x%04x because the enclosure is not in "
                                    "the mapping table\n", __func__,
                                    port_change->dev_handle);
                                continue;
                        }

                        /*
                         * If the enclosure's start_index is BAD here, it means
                         * that there is no room in the mapping table to cover
                         * all of the devices that could be in the enclosure.
                         * There's no reason to process any of the devices for
                         * this enclosure since they can't be mapped.
                         */
                        et_entry = &sc->enclosure_table[enc_idx];
                        if (et_entry->start_index == MPR_MAPTABLE_BAD_IDX) {
                                port_change->is_processed = 1;
                                mpr_dprint(sc, MPR_ERROR | MPR_MAPPING, "%s: "
                                    "failed to add the device with handle "
                                    "0x%04x because there is no free space "
                                    "available in the mapping table\n",
                                    __func__, port_change->dev_handle);
                                continue;
                        }

                        /*
                         * Add this device to the mapping table at the correct
                         * offset where space was found to map the enclosure.
                         * Then setup the DPM entry information if being used.
                         */
                        map_idx = et_entry->start_index + port_change->slot -
                            et_entry->start_slot;
                        mt_entry = &sc->mapping_table[map_idx];
                        mt_entry->physical_id = port_change->physical_id;
                        mt_entry->id = map_idx;
                        mt_entry->dev_handle = port_change->dev_handle;
                        mt_entry->missing_count = 0;
                        mt_entry->dpm_entry_num = et_entry->dpm_entry_num;
                        mt_entry->device_info = port_change->device_info |
                            (MPR_DEV_RESERVED | MPR_MAP_IN_USE);
                        if (sc->is_dpm_enable) {
                                dpm_idx = et_entry->dpm_entry_num;
                                if (dpm_idx == MPR_DPM_BAD_IDX)
                                        dpm_idx = _mapping_get_dpm_idx_from_id
                                            (sc, et_entry->enclosure_id,
                                             et_entry->phy_bits);
                                if (dpm_idx == MPR_DPM_BAD_IDX) {
                                        dpm_idx = _mapping_get_free_dpm_idx(sc);
                                        if (dpm_idx != MPR_DPM_BAD_IDX) {
                                                dpm_entry =
                                                    (Mpi2DriverMap0Entry_t *)
                                                    ((u8 *) sc->dpm_pg0 +
                                                     hdr_sz);
                                                dpm_entry += dpm_idx;
                                                dpm_entry->
                                                    PhysicalIdentifier.Low =
                                                    (0xFFFFFFFF &
                                                    et_entry->enclosure_id);
                                                dpm_entry->
                                                    PhysicalIdentifier.High =
                                                    (et_entry->enclosure_id
                                                     >> 32);
                                                dpm_entry->DeviceIndex =
                                                    (U16)et_entry->start_index;
                                                dpm_entry->MappingInformation =
                                                    et_entry->num_slots;
                                                dpm_entry->MappingInformation
                                                    <<= map_shift;
                                                dpm_entry->PhysicalBitsMapping
                                                    = et_entry->phy_bits;
                                                et_entry->dpm_entry_num =
                                                    dpm_idx;
                                                sc->dpm_entry_used[dpm_idx] = 1;
                                                sc->dpm_flush_entry[dpm_idx] =
                                                    1;
                                                port_change->is_processed = 1;
                                        } else {
                                                port_change->is_processed = 1;
                                                mpr_dprint(sc, MPR_ERROR |
                                                    MPR_MAPPING, "%s: failed "
                                                    "to add the device with "
                                                    "handle 0x%04x to "
                                                    "persistent table because "
                                                    "there is no free space "
                                                    "available\n", __func__,
                                                    port_change->dev_handle);
                                        }
                                } else {
                                        et_entry->dpm_entry_num = dpm_idx;
                                        mt_entry->dpm_entry_num = dpm_idx;
                                }
                        }
                        et_entry->init_complete = 1;
                } else if ((ioc_pg8_flags &
                    MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
                    MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING) {

                        /*
                         * Get the mapping table index for this device. If it's
                         * not in the mapping table yet, find a free entry if
                         * one is available. If there are no free entries, look
                         * for the entry that has the highest missing count. If
                         * none of that works to find an entry in the mapping
                         * table, there is a problem. Log a message and just
                         * continue on.
                         */
                        map_idx = _mapping_get_mt_idx_from_id
                            (sc, port_change->physical_id);
                        if (map_idx == MPR_MAPTABLE_BAD_IDX) {
                                search_idx = sc->num_rsvd_entries;
                                if (topo_change->switch_dev_handle)
                                        search_idx += max_num_phy_ids;
                                map_idx = _mapping_get_free_mt_idx(sc,
                                    search_idx);
                        }

                        /*
                         * If an entry will be used that has a missing device,
                         * clear its entry from  the DPM in the controller.
                         */
                        if (map_idx == MPR_MAPTABLE_BAD_IDX) {
                                map_idx = _mapping_get_high_missing_mt_idx(sc);
                                if (map_idx != MPR_MAPTABLE_BAD_IDX) {
                                        mt_entry = &sc->mapping_table[map_idx];
                                        _mapping_add_to_removal_table(sc,
                                            mt_entry->dpm_entry_num);
                                        is_removed = 1;
                                        mt_entry->init_complete = 0;
                                }
                        }
                        if (map_idx != MPR_MAPTABLE_BAD_IDX) {
                                mt_entry = &sc->mapping_table[map_idx];
                                mt_entry->physical_id =
                                    port_change->physical_id;
                                mt_entry->id = map_idx;
                                mt_entry->dev_handle = port_change->dev_handle;
                                mt_entry->missing_count = 0;
                                mt_entry->device_info =
                                    port_change->device_info |
                                    (MPR_DEV_RESERVED | MPR_MAP_IN_USE);
                        } else {
                                port_change->is_processed = 1;
                                mpr_dprint(sc, MPR_ERROR | MPR_MAPPING, "%s: "
                                    "failed to add the device with handle "
                                    "0x%04x because there is no free space "
                                    "available in the mapping table\n",
                                    __func__, port_change->dev_handle);
                                continue;
                        }
                        if (sc->is_dpm_enable) {
                                if (mt_entry->dpm_entry_num !=
                                    MPR_DPM_BAD_IDX) {
                                        dpm_idx = mt_entry->dpm_entry_num;
                                        dpm_entry = (Mpi2DriverMap0Entry_t *)
                                            ((u8 *)sc->dpm_pg0 + hdr_sz);
                                        dpm_entry += dpm_idx;
                                        missing_cnt = dpm_entry->
                                            MappingInformation &
                                            MPI2_DRVMAP0_MAPINFO_MISSING_MASK;
                                        temp64_var = dpm_entry->
                                            PhysicalIdentifier.High;
                                        temp64_var = (temp64_var << 32) |
                                           dpm_entry->PhysicalIdentifier.Low;

                                        /*
                                         * If the Mapping Table's info is not
                                         * the same as the DPM entry, clear the
                                         * init_complete flag so that it's
                                         * updated.
                                         */
                                        if ((mt_entry->physical_id ==
                                            temp64_var) && !missing_cnt)
                                                mt_entry->init_complete = 1;
                                        else
                                                mt_entry->init_complete = 0;
                                } else {
                                        dpm_idx = _mapping_get_free_dpm_idx(sc);
                                        mt_entry->init_complete = 0;
                                }
                                if (dpm_idx != MPR_DPM_BAD_IDX &&
                                    !mt_entry->init_complete) {
                                        mt_entry->dpm_entry_num = dpm_idx;
                                        dpm_entry = (Mpi2DriverMap0Entry_t *)
                                            ((u8 *)sc->dpm_pg0 + hdr_sz);
                                        dpm_entry += dpm_idx;
                                        dpm_entry->PhysicalIdentifier.Low =
                                            (0xFFFFFFFF &
                                            mt_entry->physical_id);
                                        dpm_entry->PhysicalIdentifier.High =
                                            (mt_entry->physical_id >> 32);
                                        dpm_entry->DeviceIndex = (U16) map_idx;
                                        dpm_entry->MappingInformation = 0;
                                        dpm_entry->PhysicalBitsMapping = 0;
                                        sc->dpm_entry_used[dpm_idx] = 1;
                                        sc->dpm_flush_entry[dpm_idx] = 1;
                                        port_change->is_processed = 1;
                                } else if (dpm_idx == MPR_DPM_BAD_IDX) {
                                        port_change->is_processed = 1;
                                        mpr_dprint(sc, MPR_ERROR | MPR_MAPPING,
                                            "%s: failed to add the device with "
                                            "handle 0x%04x to persistent table "
                                            "because there is no free space "
                                            "available\n", __func__,
                                            port_change->dev_handle);
                                }
                        }
                        mt_entry->init_complete = 1;
                }

                port_change->is_processed = 1;
        }
        if (is_removed)
                _mapping_clear_removed_entries(sc);
}

/**
 * _mapping_flush_dpm_pages -Flush the DPM pages to NVRAM
 * @sc: per adapter object
 *
 * Returns nothing
 */
static void
_mapping_flush_dpm_pages(struct mpr_softc *sc)
{
        Mpi2DriverMap0Entry_t *dpm_entry;
        Mpi2ConfigReply_t mpi_reply;
        Mpi2DriverMappingPage0_t config_page;
        u16 entry_num;

        for (entry_num = 0; entry_num < sc->max_dpm_entries; entry_num++) {
                if (!sc->dpm_flush_entry[entry_num])
                        continue;
                memset(&config_page, 0, sizeof(Mpi2DriverMappingPage0_t));
                memcpy(&config_page.Header, (u8 *)sc->dpm_pg0,
                    sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
                dpm_entry = (Mpi2DriverMap0Entry_t *) ((u8 *)sc->dpm_pg0 +
                    sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
                dpm_entry += entry_num;
                dpm_entry->MappingInformation = htole16(dpm_entry->
                    MappingInformation);
                dpm_entry->DeviceIndex = htole16(dpm_entry->DeviceIndex);
                dpm_entry->PhysicalBitsMapping = htole32(dpm_entry->
                    PhysicalBitsMapping);
                memcpy(&config_page.Entry, (u8 *)dpm_entry,
                    sizeof(Mpi2DriverMap0Entry_t));
                /* TODO-How to handle failed writes? */
                mpr_dprint(sc, MPR_MAPPING, "%s: Flushing DPM entry %d.\n",
                    __func__, entry_num);
                if (mpr_config_set_dpm_pg0(sc, &mpi_reply, &config_page,
                    entry_num)) {
                        mpr_dprint(sc, MPR_ERROR | MPR_MAPPING, "%s: Flush of "
                            "DPM entry %d for device failed\n", __func__,
                            entry_num);
                } else
                        sc->dpm_flush_entry[entry_num] = 0;
                dpm_entry->MappingInformation = le16toh(dpm_entry->
                    MappingInformation);
                dpm_entry->DeviceIndex = le16toh(dpm_entry->DeviceIndex);
                dpm_entry->PhysicalBitsMapping = le32toh(dpm_entry->
                    PhysicalBitsMapping);
        }
}

/**
 * _mapping_allocate_memory- allocates the memory required for mapping tables
 * @sc: per adapter object
 *
 * Allocates the memory for all the tables required for host mapping
 *
 * Return 0 on success or non-zero on failure.
 */
int
mpr_mapping_allocate_memory(struct mpr_softc *sc)
{
        uint32_t dpm_pg0_sz;

        sc->mapping_table = malloc((sizeof(struct dev_mapping_table) *
            sc->max_devices), M_MPR, M_ZERO|M_NOWAIT);
        if (!sc->mapping_table)
                goto free_resources;

        sc->removal_table = malloc((sizeof(struct map_removal_table) *
            sc->max_devices), M_MPR, M_ZERO|M_NOWAIT);
        if (!sc->removal_table)
                goto free_resources;

        sc->enclosure_table = malloc((sizeof(struct enc_mapping_table) *
            sc->max_enclosures), M_MPR, M_ZERO|M_NOWAIT);
        if (!sc->enclosure_table)
                goto free_resources;

        sc->dpm_entry_used = malloc((sizeof(u8) * sc->max_dpm_entries),
            M_MPR, M_ZERO|M_NOWAIT);
        if (!sc->dpm_entry_used)
                goto free_resources;

        sc->dpm_flush_entry = malloc((sizeof(u8) * sc->max_dpm_entries),
            M_MPR, M_ZERO|M_NOWAIT);
        if (!sc->dpm_flush_entry)
                goto free_resources;

        dpm_pg0_sz = sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER) +
            (sc->max_dpm_entries * sizeof(MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY));

        sc->dpm_pg0 = malloc(dpm_pg0_sz, M_MPR, M_ZERO|M_NOWAIT);
        if (!sc->dpm_pg0) {
                printf("%s: memory alloc failed for dpm page; disabling dpm\n",
                    __func__);
                sc->is_dpm_enable = 0;
        }

        return 0;

free_resources:
        free(sc->mapping_table, M_MPR);
        free(sc->removal_table, M_MPR);
        free(sc->enclosure_table, M_MPR);
        free(sc->dpm_entry_used, M_MPR);
        free(sc->dpm_flush_entry, M_MPR);
        free(sc->dpm_pg0, M_MPR);
        printf("%s: device initialization failed due to failure in mapping "
            "table memory allocation\n", __func__);
        return -1;
}

/**
 * mpr_mapping_free_memory- frees the memory allocated for mapping tables
 * @sc: per adapter object
 *
 * Returns nothing.
 */
void
mpr_mapping_free_memory(struct mpr_softc *sc)
{
        free(sc->mapping_table, M_MPR);
        free(sc->removal_table, M_MPR);
        free(sc->enclosure_table, M_MPR);
        free(sc->dpm_entry_used, M_MPR);
        free(sc->dpm_flush_entry, M_MPR);
        free(sc->dpm_pg0, M_MPR);
}

static bool
_mapping_process_dpm_pg0(struct mpr_softc *sc)
{
        u8 missing_cnt, enc_idx;
        u16 slot_id, entry_num, num_slots;
        u32 map_idx, dev_idx, start_idx, end_idx;
        struct dev_mapping_table *mt_entry;
        Mpi2DriverMap0Entry_t *dpm_entry;
        u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
        u16 max_num_phy_ids = le16toh(sc->ioc_pg8.MaxNumPhysicalMappedIDs);
        struct enc_mapping_table *et_entry;
        u64 physical_id;
        u32 phy_bits = 0;

        /*
         * start_idx and end_idx are only used for IR.
         */
        if (sc->ir_firmware)
                _mapping_get_ir_maprange(sc, &start_idx, &end_idx);

        /*
         * Look through all of the DPM entries that were read from the
         * controller and copy them over to the driver's internal table if they
         * have a non-zero ID. At this point, any ID with a value of 0 would be
         * invalid, so don't copy it.
         */
        mpr_dprint(sc, MPR_MAPPING, "%s: Start copy of %d DPM entries into the "
            "mapping table.\n", __func__, sc->max_dpm_entries);
        dpm_entry = (Mpi2DriverMap0Entry_t *) ((uint8_t *) sc->dpm_pg0 +
            sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
        for (entry_num = 0; entry_num < sc->max_dpm_entries; entry_num++, 
            dpm_entry++) {
                physical_id = dpm_entry->PhysicalIdentifier.High;
                physical_id = (physical_id << 32) | 
                    dpm_entry->PhysicalIdentifier.Low;
                if (!physical_id) {
                        sc->dpm_entry_used[entry_num] = 0;
                        continue;
                }
                sc->dpm_entry_used[entry_num] = 1;
                dpm_entry->MappingInformation = le16toh(dpm_entry->
                    MappingInformation);
                missing_cnt = dpm_entry->MappingInformation &
                    MPI2_DRVMAP0_MAPINFO_MISSING_MASK;
                dev_idx = le16toh(dpm_entry->DeviceIndex);
                phy_bits = le32toh(dpm_entry->PhysicalBitsMapping);

                /*
                 * Volumes are at special locations in the mapping table so
                 * account for that. Volume mapping table entries do not depend
                 * on the type of mapping, so continue the loop after adding
                 * volumes to the mapping table.
                 */
                if (sc->ir_firmware && (dev_idx >= start_idx) &&
                    (dev_idx <= end_idx)) {
                        mt_entry = &sc->mapping_table[dev_idx];
                        mt_entry->physical_id =
                            dpm_entry->PhysicalIdentifier.High;
                        mt_entry->physical_id = (mt_entry->physical_id << 32) |
                            dpm_entry->PhysicalIdentifier.Low;
                        mt_entry->id = dev_idx;
                        mt_entry->missing_count = missing_cnt;
                        mt_entry->dpm_entry_num = entry_num;
                        mt_entry->device_info = MPR_DEV_RESERVED;
                        continue;
                }
                if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
                    MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) {

                        /*
                         * The dev_idx for an enclosure is the start index. If
                         * the start index is within the controller's default
                         * enclosure area, set the number of slots for this
                         * enclosure to the max allowed. Otherwise, it should be
                         * a normal enclosure and the number of slots is in the
                         * DPM entry's Mapping Information.
                         */
                        if (dev_idx < (sc->num_rsvd_entries +
                            max_num_phy_ids)) {
                                slot_id = 0;
                                if (ioc_pg8_flags &
                                    MPI2_IOCPAGE8_FLAGS_DA_START_SLOT_1)
                                        slot_id = 1;
                                num_slots = max_num_phy_ids;
                        } else {
                                slot_id = 0;
                                num_slots = dpm_entry->MappingInformation &
                                    MPI2_DRVMAP0_MAPINFO_SLOT_MASK;
                                num_slots >>= MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT;
                        }
                        enc_idx = sc->num_enc_table_entries;
                        if (enc_idx >= sc->max_enclosures) {
                                mpr_dprint(sc, MPR_ERROR | MPR_MAPPING, "%s: "
                                    "Number of enclosure entries in DPM exceed "
                                    "the max allowed of %d.\n", __func__,
                                    sc->max_enclosures);
                                break;
                        }
                        sc->num_enc_table_entries++;
                        et_entry = &sc->enclosure_table[enc_idx];
                        physical_id = dpm_entry->PhysicalIdentifier.High;
                        et_entry->enclosure_id = (physical_id << 32) |
                            dpm_entry->PhysicalIdentifier.Low;
                        et_entry->start_index = dev_idx;
                        et_entry->dpm_entry_num = entry_num;
                        et_entry->num_slots = num_slots;
                        et_entry->start_slot = slot_id;
                        et_entry->missing_count = missing_cnt;
                        et_entry->phy_bits = phy_bits;

                        /*
                         * Initialize all entries for this enclosure in the
                         * mapping table and mark them as reserved. The actual
                         * devices have not been processed yet but when they are
                         * they will use these entries. If an entry is found
                         * that already has a valid DPM index, the mapping table
                         * is corrupt. This can happen if the mapping type is
                         * changed without clearing all of the DPM entries in
                         * the controller.
                         */
                        mt_entry = &sc->mapping_table[dev_idx];
                        for (map_idx = dev_idx; map_idx < (dev_idx + num_slots);
                            map_idx++, mt_entry++) {
                                if (mt_entry->dpm_entry_num !=
                                    MPR_DPM_BAD_IDX) {
                                        mpr_dprint(sc, MPR_ERROR | MPR_MAPPING,
                                            "%s: Conflict in mapping table for "
                                            " enclosure %d\n", __func__,
                                            enc_idx);
                                        goto fail;
                                }
                                physical_id =
                                    dpm_entry->PhysicalIdentifier.High;
                                mt_entry->physical_id = (physical_id << 32) |
                                    dpm_entry->PhysicalIdentifier.Low;
                                mt_entry->phy_bits = phy_bits;
                                mt_entry->id = dev_idx;
                                mt_entry->dpm_entry_num = entry_num;
                                mt_entry->missing_count = missing_cnt;
                                mt_entry->device_info = MPR_DEV_RESERVED;
                        }
                } else if ((ioc_pg8_flags &
                    MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
                    MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING) {

                        /*
                         * Device mapping, so simply copy the DPM entries to the
                         * mapping table, but check for a corrupt mapping table
                         * (as described above in Enc/Slot mapping).
                         */
                        map_idx = dev_idx;
                        mt_entry = &sc->mapping_table[map_idx];
                        if (mt_entry->dpm_entry_num != MPR_DPM_BAD_IDX) {
                                mpr_dprint(sc, MPR_ERROR | MPR_MAPPING, "%s: "
                                    "Conflict in mapping table for device %d\n",
                                    __func__, map_idx);
                                goto fail;
                        }
                        physical_id = dpm_entry->PhysicalIdentifier.High;
                        mt_entry->physical_id = (physical_id << 32) |
                            dpm_entry->PhysicalIdentifier.Low;
                        mt_entry->phy_bits = phy_bits;
                        mt_entry->id = dev_idx;
                        mt_entry->missing_count = missing_cnt;
                        mt_entry->dpm_entry_num = entry_num;
                        mt_entry->device_info = MPR_DEV_RESERVED;
                }
        } /*close the loop for DPM table */
        return (true);

fail:
        for (entry_num = 0; entry_num < sc->max_dpm_entries; entry_num++) {
                sc->dpm_entry_used[entry_num] = 0;
                /*
                 * for IR firmware, it may be necessary to wipe out
                 * sc->mapping_table volumes tooi
                 */
        }
        for (enc_idx = 0; enc_idx < sc->num_enc_table_entries; enc_idx++)
                _mapping_clear_enc_entry(sc->enclosure_table + enc_idx);
        sc->num_enc_table_entries = 0;
        return (false);
}

/*
 * mpr_mapping_check_devices - start of the day check for device availabilty
 * @sc: per adapter object
 *
 * Returns nothing.
 */
void
mpr_mapping_check_devices(void *data)
{
        u32 i;
        struct dev_mapping_table *mt_entry;
        struct mpr_softc *sc = (struct mpr_softc *)data;
        u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
        struct enc_mapping_table *et_entry;
        u32 start_idx = 0, end_idx = 0;
        u8 stop_device_checks = 0;

        MPR_FUNCTRACE(sc);

        /*
         * Clear this flag so that this function is never called again except
         * within this function if the check needs to be done again. The
         * purpose is to check for missing devices that are currently in the
         * mapping table so do this only at driver init after discovery.
         */
        sc->track_mapping_events = 0;

        /*
         * callout synchronization
         * This is used to prevent race conditions for the callout. 
         */
        mpr_dprint(sc, MPR_MAPPING, "%s: Start check for missing devices.\n",
            __func__);
        mtx_assert(&sc->mpr_mtx, MA_OWNED);
        if ((callout_pending(&sc->device_check_callout)) ||
            (!callout_active(&sc->device_check_callout))) {
                mpr_dprint(sc, MPR_MAPPING, "%s: Device Check Callout is "
                    "already pending or not active.\n", __func__);
                return;
        }
        callout_deactivate(&sc->device_check_callout);

        /*
         * Use callout to check if any devices in the mapping table have been
         * processed yet. If ALL devices are marked as not init_complete, no
         * devices have been processed and mapped. Until devices are mapped
         * there's no reason to mark them as missing. Continue resetting this
         * callout until devices have been mapped.
         */
        if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
            MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) {
                et_entry = sc->enclosure_table;
                for (i = 0; i < sc->num_enc_table_entries; i++, et_entry++) {
                        if (et_entry->init_complete) {
                                stop_device_checks = 1;
                                break;
                        }
                }
        } else if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
            MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING) {
                mt_entry = sc->mapping_table;
                for (i = 0; i < sc->max_devices; i++, mt_entry++) {
                        if (mt_entry->init_complete) {
                                stop_device_checks = 1;
                                break;
                        }
                }
        }

        /*
         * Setup another callout check after a delay. Keep doing this until
         * devices are mapped.
         */
        if (!stop_device_checks) {
                mpr_dprint(sc, MPR_MAPPING, "%s: No devices have been mapped. "
                    "Reset callout to check again after a %d second delay.\n",
                    __func__, MPR_MISSING_CHECK_DELAY);
                callout_reset(&sc->device_check_callout,
                    MPR_MISSING_CHECK_DELAY * hz, mpr_mapping_check_devices,
                    sc);
                return;
        }
        mpr_dprint(sc, MPR_MAPPING, "%s: Device check complete.\n", __func__);

        /*
         * Depending on the mapping type, check if devices have been processed
         * and update their missing counts if not processed.
         */
        if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
            MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) {
                et_entry = sc->enclosure_table;
                for (i = 0; i < sc->num_enc_table_entries; i++, et_entry++) {
                        if (!et_entry->init_complete) {
                                if (et_entry->missing_count <
                                    MPR_MAX_MISSING_COUNT) {
                                        mpr_dprint(sc, MPR_MAPPING, "%s: "
                                            "Enclosure %d is missing from the "
                                            "topology. Update its missing "
                                            "count.\n", __func__, i);
                                        et_entry->missing_count++;
                                        if (et_entry->dpm_entry_num !=
                                            MPR_DPM_BAD_IDX) {
                                                _mapping_commit_enc_entry(sc,
                                                    et_entry);
                                        }
                                }
                                et_entry->init_complete = 1;
                        }
                }
                if (!sc->ir_firmware)
                        return;
                _mapping_get_ir_maprange(sc, &start_idx, &end_idx);
                mt_entry = &sc->mapping_table[start_idx];
        } else if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
            MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING) {
                start_idx = 0;
                end_idx = sc->max_devices - 1;
                mt_entry = sc->mapping_table;
        }

        /*
         * The start and end indices have been set above according to the
         * mapping type. Go through these mappings and update any entries that
         * do not have the init_complete flag set, which means they are missing.
         */
        if (end_idx == 0)
                return;
        for (i = start_idx; i < (end_idx + 1); i++, mt_entry++) {
                if (mt_entry->device_info & MPR_DEV_RESERVED
                    && !mt_entry->physical_id)
                        mt_entry->init_complete = 1;
                else if (mt_entry->device_info & MPR_DEV_RESERVED) {
                        if (!mt_entry->init_complete) {
                                mpr_dprint(sc, MPR_MAPPING, "%s: Device in "
                                    "mapping table at index %d is missing from "
                                    "topology. Update its missing count.\n",
                                    __func__, i);
                                if (mt_entry->missing_count <
                                    MPR_MAX_MISSING_COUNT) {
                                        mt_entry->missing_count++;
                                        if (mt_entry->dpm_entry_num !=
                                            MPR_DPM_BAD_IDX) {
                                                _mapping_commit_map_entry(sc,
                                                    mt_entry);
                                        }
                                }
                                mt_entry->init_complete = 1;
                        }
                }
        }
}

/**
 * mpr_mapping_initialize - initialize mapping tables
 * @sc: per adapter object
 *
 * Read controller persitant mapping tables into internal data area.
 *
 * Return 0 for success or non-zero for failure.
 */
int
mpr_mapping_initialize(struct mpr_softc *sc)
{
        uint16_t volume_mapping_flags, dpm_pg0_sz;
        uint32_t i;
        Mpi2ConfigReply_t mpi_reply;
        int error;
        uint8_t retry_count;
        uint16_t ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);

        /* The additional 1 accounts for the virtual enclosure
         * created for the controller
         */
        sc->max_enclosures = sc->facts->MaxEnclosures + 1;
        sc->max_expanders = sc->facts->MaxSasExpanders;
        sc->max_volumes = sc->facts->MaxVolumes;
        sc->max_devices = sc->facts->MaxTargets + sc->max_volumes;
        sc->pending_map_events = 0;
        sc->num_enc_table_entries = 0;
        sc->num_rsvd_entries = 0;
        sc->max_dpm_entries = sc->ioc_pg8.MaxPersistentEntries;
        sc->is_dpm_enable = (sc->max_dpm_entries) ? 1 : 0;
        sc->track_mapping_events = 0;

        mpr_dprint(sc, MPR_MAPPING, "%s: Mapping table has a max of %d entries "
            "and DPM has a max of %d entries.\n", __func__, sc->max_devices,
            sc->max_dpm_entries);
        
        if (ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_DISABLE_PERSISTENT_MAPPING)
                sc->is_dpm_enable = 0;

        if (ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0)
                sc->num_rsvd_entries = 1;

        volume_mapping_flags = sc->ioc_pg8.IRVolumeMappingFlags &
            MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
        if (sc->ir_firmware && (volume_mapping_flags ==
            MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING))
                sc->num_rsvd_entries += sc->max_volumes;

        error = mpr_mapping_allocate_memory(sc);
        if (error)
                return (error);

        for (i = 0; i < sc->max_devices; i++)
                _mapping_clear_map_entry(sc->mapping_table + i);

        for (i = 0; i < sc->max_enclosures; i++)
                _mapping_clear_enc_entry(sc->enclosure_table + i);

        for (i = 0; i < sc->max_devices; i++) {
                sc->removal_table[i].dev_handle = 0;
                sc->removal_table[i].dpm_entry_num = MPR_DPM_BAD_IDX;
        }

        memset(sc->dpm_entry_used, 0, sc->max_dpm_entries);
        memset(sc->dpm_flush_entry, 0, sc->max_dpm_entries);

        if (sc->is_dpm_enable) {
                dpm_pg0_sz = sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER) +
                    (sc->max_dpm_entries *
                     sizeof(MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY));
                retry_count = 0;

retry_read_dpm:
                if (mpr_config_get_dpm_pg0(sc, &mpi_reply, sc->dpm_pg0,
                    dpm_pg0_sz)) {
                        mpr_dprint(sc, MPR_ERROR | MPR_MAPPING, "%s: DPM page "
                            "read failed.\n", __func__);
                        if (retry_count < 3) {
                                retry_count++;
                                goto retry_read_dpm;
                        }
                        sc->is_dpm_enable = 0;
                }
        }

        if (sc->is_dpm_enable) {
                if (!_mapping_process_dpm_pg0(sc))
                        sc->is_dpm_enable = 0;
        }
        if (! sc->is_dpm_enable) {
                mpr_dprint(sc, MPR_MAPPING, "%s: DPM processing is disabled. "
                    "Device mappings will not persist across reboots or "
                    "resets.\n", __func__);
        }

        sc->track_mapping_events = 1;
        return 0;
}

/**
 * mpr_mapping_exit - clear mapping table and associated memory
 * @sc: per adapter object
 *
 * Returns nothing.
 */
void
mpr_mapping_exit(struct mpr_softc *sc)
{
        _mapping_flush_dpm_pages(sc);
        mpr_mapping_free_memory(sc);
}

/**
 * mpr_mapping_get_tid - return the target id for sas device and handle
 * @sc: per adapter object
 * @sas_address: sas address of the device
 * @handle: device handle
 *
 * Returns valid target ID on success or BAD_ID.
 */
unsigned int
mpr_mapping_get_tid(struct mpr_softc *sc, uint64_t sas_address, u16 handle)
{
        u32 map_idx;
        struct dev_mapping_table *mt_entry;

        for (map_idx = 0; map_idx < sc->max_devices; map_idx++) {
                mt_entry = &sc->mapping_table[map_idx];
                if (mt_entry->dev_handle == handle && mt_entry->physical_id ==
                    sas_address)
                        return mt_entry->id;
        }

        return MPR_MAP_BAD_ID;
}

/**
 * mpr_mapping_get_tid_from_handle - find a target id in mapping table using
 * only the dev handle.  This is just a wrapper function for the local function
 * _mapping_get_mt_idx_from_handle.
 * @sc: per adapter object
 * @handle: device handle
 *
 * Returns valid target ID on success or BAD_ID.
 */
unsigned int
mpr_mapping_get_tid_from_handle(struct mpr_softc *sc, u16 handle)
{
        return (_mapping_get_mt_idx_from_handle(sc, handle));
}

/**
 * mpr_mapping_get_raid_tid - return the target id for raid device
 * @sc: per adapter object
 * @wwid: world wide identifier for raid volume
 * @volHandle: volume device handle
 *
 * Returns valid target ID on success or BAD_ID.
 */
unsigned int
mpr_mapping_get_raid_tid(struct mpr_softc *sc, u64 wwid, u16 volHandle)
{
        u32 start_idx, end_idx, map_idx;
        struct dev_mapping_table *mt_entry;

        _mapping_get_ir_maprange(sc, &start_idx, &end_idx);
        mt_entry = &sc->mapping_table[start_idx];
        for (map_idx  = start_idx; map_idx <= end_idx; map_idx++, mt_entry++) {
                if (mt_entry->dev_handle == volHandle &&
                    mt_entry->physical_id == wwid)
                        return mt_entry->id;
        }

        return MPR_MAP_BAD_ID;
}

/**
 * mpr_mapping_get_raid_tid_from_handle - find raid device in mapping table
 * using only the volume dev handle.  This is just a wrapper function for the
 * local function _mapping_get_ir_mt_idx_from_handle.
 * @sc: per adapter object
 * @volHandle: volume device handle
 *
 * Returns valid target ID on success or BAD_ID.
 */
unsigned int
mpr_mapping_get_raid_tid_from_handle(struct mpr_softc *sc, u16 volHandle)
{
        return (_mapping_get_ir_mt_idx_from_handle(sc, volHandle));
}

/**
 * mpr_mapping_enclosure_dev_status_change_event - handle enclosure events
 * @sc: per adapter object
 * @event_data: event data payload
 *
 * Return nothing.
 */
void
mpr_mapping_enclosure_dev_status_change_event(struct mpr_softc *sc,
    Mpi2EventDataSasEnclDevStatusChange_t *event_data)
{
        u8 enc_idx, missing_count;
        struct enc_mapping_table *et_entry;
        Mpi2DriverMap0Entry_t *dpm_entry;
        u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
        u8 map_shift = MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT;
        u8 update_phy_bits = 0;
        u32 saved_phy_bits;
        uint64_t temp64_var;

        if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) !=
            MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING)
                goto out;

        dpm_entry = (Mpi2DriverMap0Entry_t *)((u8 *)sc->dpm_pg0 +
            sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));

        if (event_data->ReasonCode == MPI2_EVENT_SAS_ENCL_RC_ADDED) {
                if (!event_data->NumSlots) {
                        mpr_dprint(sc, MPR_ERROR | MPR_MAPPING, "%s: Enclosure "
                            "with handle = 0x%x reported 0 slots.\n", __func__,
                            le16toh(event_data->EnclosureHandle));
                        goto out;
                }
                temp64_var = event_data->EnclosureLogicalID.High;
                temp64_var = (temp64_var << 32) |
                    event_data->EnclosureLogicalID.Low;
                enc_idx = _mapping_get_enc_idx_from_id(sc, temp64_var,
                    event_data->PhyBits);

                /*
                 * If the Added enclosure is already in the Enclosure Table,
                 * make sure that all the the enclosure info is up to date. If
                 * the enclosure was missing and has just been added back, or if
                 * the enclosure's Phy Bits have changed, clear the missing
                 * count and update the Phy Bits in the mapping table and in the
                 * DPM, if it's being used.
                 */
                if (enc_idx != MPR_ENCTABLE_BAD_IDX) {
                        et_entry = &sc->enclosure_table[enc_idx];
                        if (et_entry->init_complete &&
                            !et_entry->missing_count) {
                                mpr_dprint(sc, MPR_MAPPING, "%s: Enclosure %d "
                                    "is already present with handle = 0x%x\n",
                                    __func__, enc_idx, et_entry->enc_handle);
                                goto out;
                        }
                        et_entry->enc_handle = le16toh(event_data->
                            EnclosureHandle);
                        et_entry->start_slot = le16toh(event_data->StartSlot);
                        saved_phy_bits = et_entry->phy_bits;
                        et_entry->phy_bits |= le32toh(event_data->PhyBits);
                        if (saved_phy_bits != et_entry->phy_bits)
                                update_phy_bits = 1;
                        if (et_entry->missing_count || update_phy_bits) {
                                et_entry->missing_count = 0;
                                if (sc->is_dpm_enable &&
                                    et_entry->dpm_entry_num !=
                                    MPR_DPM_BAD_IDX) {
                                        dpm_entry += et_entry->dpm_entry_num;
                                        missing_count =
                                            (u8)(dpm_entry->MappingInformation &
                                            MPI2_DRVMAP0_MAPINFO_MISSING_MASK);
                                        if (missing_count || update_phy_bits) {
                                                dpm_entry->MappingInformation
                                                    = et_entry->num_slots;
                                                dpm_entry->MappingInformation
                                                    <<= map_shift;
                                                dpm_entry->PhysicalBitsMapping
                                                    = et_entry->phy_bits;
                                                sc->dpm_flush_entry[et_entry->
                                                    dpm_entry_num] = 1;
                                        }
                                }
                        }
                } else {
                        /*
                         * This is a new enclosure that is being added.
                         * Initialize the Enclosure Table entry. It will be
                         * finalized when a device is added for the enclosure
                         * and the enclosure has enough space in the Mapping
                         * Table to map its devices.
                         */
                        enc_idx = sc->num_enc_table_entries;
                        if (enc_idx >= sc->max_enclosures) {
                                mpr_dprint(sc, MPR_ERROR | MPR_MAPPING, "%s: "
                                    "Enclosure cannot be added to mapping "
                                    "table because it's full.\n", __func__);
                                goto out;
                        }
                        sc->num_enc_table_entries++;
                        et_entry = &sc->enclosure_table[enc_idx];
                        et_entry->enc_handle = le16toh(event_data->
                            EnclosureHandle);
                        et_entry->enclosure_id = le64toh(event_data->
                            EnclosureLogicalID.High);
                        et_entry->enclosure_id =
                            ((et_entry->enclosure_id << 32) |
                            le64toh(event_data->EnclosureLogicalID.Low));
                        et_entry->start_index = MPR_MAPTABLE_BAD_IDX;
                        et_entry->dpm_entry_num = MPR_DPM_BAD_IDX;
                        et_entry->num_slots = le16toh(event_data->NumSlots);
                        et_entry->start_slot = le16toh(event_data->StartSlot);
                        et_entry->phy_bits = le32toh(event_data->PhyBits);
                }
                et_entry->init_complete = 1;
        } else if (event_data->ReasonCode ==
            MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING) {
                /*
                 * An enclosure was removed. Update its missing count and then
                 * update the DPM entry with the new missing count for the
                 * enclosure.
                 */
                enc_idx = _mapping_get_enc_idx_from_handle(sc,
                    le16toh(event_data->EnclosureHandle));
                if (enc_idx == MPR_ENCTABLE_BAD_IDX) {
                        mpr_dprint(sc, MPR_ERROR | MPR_MAPPING, "%s: Cannot "
                            "unmap enclosure %d because it has already been "
                            "deleted.\n", __func__, enc_idx);
                        goto out;
                }
                et_entry = &sc->enclosure_table[enc_idx];
                if (et_entry->missing_count < MPR_MAX_MISSING_COUNT)
                        et_entry->missing_count++;
                if (sc->is_dpm_enable &&
                    et_entry->dpm_entry_num != MPR_DPM_BAD_IDX) {
                        dpm_entry += et_entry->dpm_entry_num;
                        dpm_entry->MappingInformation = et_entry->num_slots;
                        dpm_entry->MappingInformation <<= map_shift;
                        dpm_entry->MappingInformation |=
                            et_entry->missing_count;
                        sc->dpm_flush_entry[et_entry->dpm_entry_num] = 1;
                }
                et_entry->init_complete = 1;
        }

out:
        _mapping_flush_dpm_pages(sc);
        if (sc->pending_map_events)
                sc->pending_map_events--;
}

/**
 * mpr_mapping_topology_change_event - handle topology change events
 * @sc: per adapter object
 * @event_data: event data payload
 *
 * Returns nothing.
 */
void
mpr_mapping_topology_change_event(struct mpr_softc *sc,
    Mpi2EventDataSasTopologyChangeList_t *event_data)
{
        struct _map_topology_change topo_change;
        struct _map_phy_change *phy_change;
        Mpi2EventSasTopoPhyEntry_t *event_phy_change;
        u8 i, num_entries;

        topo_change.enc_handle = le16toh(event_data->EnclosureHandle);
        topo_change.exp_handle = le16toh(event_data->ExpanderDevHandle);
        num_entries = event_data->NumEntries;
        topo_change.num_entries = num_entries;
        topo_change.start_phy_num = event_data->StartPhyNum;
        topo_change.num_phys = event_data->NumPhys;
        topo_change.exp_status = event_data->ExpStatus;
        event_phy_change = event_data->PHY;
        topo_change.phy_details = NULL;

        if (!num_entries)
                goto out;
        phy_change = malloc(sizeof(struct _map_phy_change) * num_entries,
            M_MPR, M_NOWAIT|M_ZERO);
        topo_change.phy_details = phy_change;
        if (!phy_change)
                goto out;
        for (i = 0; i < num_entries; i++, event_phy_change++, phy_change++) {
                phy_change->dev_handle = le16toh(event_phy_change->
                    AttachedDevHandle);
                phy_change->reason = event_phy_change->PhyStatus &
                    MPI2_EVENT_SAS_TOPO_RC_MASK;
        }
        _mapping_update_missing_count(sc, &topo_change);
        _mapping_get_dev_info(sc, &topo_change);
        _mapping_clear_removed_entries(sc);
        _mapping_add_new_device(sc, &topo_change);

out:
        free(topo_change.phy_details, M_MPR);
        _mapping_flush_dpm_pages(sc);
        if (sc->pending_map_events)
                sc->pending_map_events--;
}

/**
 * mpr_mapping_pcie_topology_change_event - handle PCIe topology change events
 * @sc: per adapter object
 * @event_data: event data payload
 *
 * Returns nothing.
 */
void
mpr_mapping_pcie_topology_change_event(struct mpr_softc *sc,
    Mpi26EventDataPCIeTopologyChangeList_t *event_data)
{
        struct _map_pcie_topology_change topo_change;
        struct _map_port_change *port_change;
        Mpi26EventPCIeTopoPortEntry_t *event_port_change;
        u8 i, num_entries;

        topo_change.switch_dev_handle = le16toh(event_data->SwitchDevHandle);
        topo_change.enc_handle = le16toh(event_data->EnclosureHandle);
        num_entries = event_data->NumEntries;
        topo_change.num_entries = num_entries;
        topo_change.start_port_num = event_data->StartPortNum;
        topo_change.num_ports = event_data->NumPorts;
        topo_change.switch_status = event_data->SwitchStatus;
        event_port_change = event_data->PortEntry;
        topo_change.port_details = NULL;

        if (!num_entries)
                goto out;
        port_change = malloc(sizeof(struct _map_port_change) * num_entries,
            M_MPR, M_NOWAIT|M_ZERO);
        topo_change.port_details = port_change;
        if (!port_change)
                goto out;
        for (i = 0; i < num_entries; i++, event_port_change++, port_change++) {
                port_change->dev_handle = le16toh(event_port_change->
                    AttachedDevHandle);
                port_change->reason = event_port_change->PortStatus;
        }
        _mapping_update_pcie_missing_count(sc, &topo_change);
        _mapping_get_pcie_dev_info(sc, &topo_change);
        _mapping_clear_removed_entries(sc);
        _mapping_add_new_pcie_device(sc, &topo_change);

out:
        free(topo_change.port_details, M_MPR);
        _mapping_flush_dpm_pages(sc);
        if (sc->pending_map_events)
                sc->pending_map_events--;
}

/**
 * mpr_mapping_ir_config_change_event - handle IR config change list events
 * @sc: per adapter object
 * @event_data: event data payload
 *
 * Returns nothing.
 */
void
mpr_mapping_ir_config_change_event(struct mpr_softc *sc,
    Mpi2EventDataIrConfigChangeList_t *event_data)
{
        Mpi2EventIrConfigElement_t *element;
        int i;
        u64 *wwid_table;
        u32 map_idx, flags;
        struct dev_mapping_table *mt_entry;
        u16 element_flags;

        wwid_table = malloc(sizeof(u64) * event_data->NumElements, M_MPR,
            M_NOWAIT | M_ZERO);
        if (!wwid_table)
                goto out;
        element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
        flags = le32toh(event_data->Flags);

        /*
         * For volume changes, get the WWID for the volume and put it in a
         * table to be used in the processing of the IR change event.
         */
        for (i = 0; i < event_data->NumElements; i++, element++) {
                element_flags = le16toh(element->ElementFlags);
                if ((element->ReasonCode != MPI2_EVENT_IR_CHANGE_RC_ADDED) &&
                    (element->ReasonCode != MPI2_EVENT_IR_CHANGE_RC_REMOVED) &&
                    (element->ReasonCode != MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE)
                    && (element->ReasonCode !=
                        MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED))
                        continue;
                if ((element_flags &
                    MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK) ==
                    MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT) {
                        mpr_config_get_volume_wwid(sc,
                            le16toh(element->VolDevHandle), &wwid_table[i]);
                }
        }

        /*
         * Check the ReasonCode for each element in the IR event and Add/Remove
         * Volumes or Physical Disks of Volumes to/from the mapping table. Use
         * the WWIDs gotten above in wwid_table.
         */
        if (flags == MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG)
                goto out;
        else {
                element = (Mpi2EventIrConfigElement_t *)&event_data->
                    ConfigElement[0];
                for (i = 0; i < event_data->NumElements; i++, element++) {
                        if (element->ReasonCode ==
                            MPI2_EVENT_IR_CHANGE_RC_ADDED ||
                            element->ReasonCode ==
                            MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED) {
                                map_idx = _mapping_get_ir_mt_idx_from_wwid
                                    (sc, wwid_table[i]);
                                if (map_idx != MPR_MAPTABLE_BAD_IDX) {
                                        /*
                                         * The volume is already in the mapping
                                         * table. Just update it's info.
                                         */
                                        mt_entry = &sc->mapping_table[map_idx];
                                        mt_entry->id = map_idx;
                                        mt_entry->dev_handle = le16toh
                                            (element->VolDevHandle);
                                        mt_entry->device_info =
                                            MPR_DEV_RESERVED | MPR_MAP_IN_USE;
                                        _mapping_update_ir_missing_cnt(sc,
                                            map_idx, element, wwid_table[i]);
                                        continue;
                                }

                                /*
                                 * Volume is not in mapping table yet. Find a
                                 * free entry in the mapping table at the
                                 * volume mapping locations. If no entries are
                                 * available, this is an error because it means
                                 * there are more volumes than can be mapped
                                 * and that should never happen for volumes.
                                 */
                                map_idx = _mapping_get_free_ir_mt_idx(sc);
                                if (map_idx == MPR_MAPTABLE_BAD_IDX)
                                {
                                        mpr_dprint(sc, MPR_ERROR | MPR_MAPPING,
                                            "%s: failed to add the volume with "
                                            "handle 0x%04x because there is no "
                                            "free space available in the "
                                            "mapping table\n", __func__,
                                            le16toh(element->VolDevHandle));
                                        continue;
                                }
                                mt_entry = &sc->mapping_table[map_idx];
                                mt_entry->physical_id = wwid_table[i];
                                mt_entry->id = map_idx;
                                mt_entry->dev_handle = le16toh(element->
                                    VolDevHandle);
                                mt_entry->device_info = MPR_DEV_RESERVED |
                                    MPR_MAP_IN_USE;
                                _mapping_update_ir_missing_cnt(sc, map_idx,
                                    element, wwid_table[i]);
                        } else if (element->ReasonCode ==
                            MPI2_EVENT_IR_CHANGE_RC_REMOVED) {
                                map_idx = _mapping_get_ir_mt_idx_from_wwid(sc,
                                    wwid_table[i]);
                                if (map_idx == MPR_MAPTABLE_BAD_IDX) {
                                        mpr_dprint(sc, MPR_MAPPING,"%s: Failed "
                                            "to remove a volume because it has "
                                            "already been removed.\n",
                                            __func__);
                                        continue;
                                }
                                _mapping_update_ir_missing_cnt(sc, map_idx,
                                    element, wwid_table[i]);
                        } else if (element->ReasonCode ==
                            MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED) {
                                map_idx = _mapping_get_mt_idx_from_handle(sc,
                                    le16toh(element->VolDevHandle));
                                if (map_idx == MPR_MAPTABLE_BAD_IDX) {
                                        mpr_dprint(sc, MPR_MAPPING,"%s: Failed "
                                            "to remove volume with handle "
                                            "0x%04x because it has already "
                                            "been removed.\n", __func__,
                                            le16toh(element->VolDevHandle));
                                        continue;
                                }
                                mt_entry = &sc->mapping_table[map_idx];
                                _mapping_update_ir_missing_cnt(sc, map_idx,
                                    element, mt_entry->physical_id);
                        }
                }
        }

out:
        _mapping_flush_dpm_pages(sc);
        free(wwid_table, M_MPR);
        if (sc->pending_map_events)
                sc->pending_map_events--;
}