2 * Copyright (c) 2009 Yahoo! Inc.
3 * Copyright (c) 2011-2015 LSI Corp.
4 * Copyright (c) 2013-2016 Avago Technologies
5 * Copyright 2000-2020 Broadcom Inc.
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
29 * Broadcom Inc. (LSI) MPT-Fusion Host Adapter FreeBSD
33 #include <sys/cdefs.h>
34 __FBSDID("$FreeBSD$");
36 /* Communications core for Avago Technologies (LSI) MPT3 */
38 /* TODO Move headers to mprvar */
39 #include <sys/types.h>
40 #include <sys/param.h>
41 #include <sys/systm.h>
42 #include <sys/kernel.h>
43 #include <sys/selinfo.h>
44 #include <sys/module.h>
48 #include <sys/malloc.h>
50 #include <sys/sysctl.h>
51 #include <sys/endian.h>
52 #include <sys/queue.h>
53 #include <sys/kthread.h>
54 #include <sys/taskqueue.h>
57 #include <machine/bus.h>
58 #include <machine/resource.h>
61 #include <machine/stdarg.h>
64 #include <cam/cam_ccb.h>
65 #include <cam/cam_debug.h>
66 #include <cam/cam_sim.h>
67 #include <cam/cam_xpt_sim.h>
68 #include <cam/cam_xpt_periph.h>
69 #include <cam/cam_periph.h>
70 #include <cam/scsi/scsi_all.h>
71 #include <cam/scsi/scsi_message.h>
72 #include <cam/scsi/smp_all.h>
74 #include <dev/nvme/nvme.h>
76 #include <dev/mpr/mpi/mpi2_type.h>
77 #include <dev/mpr/mpi/mpi2.h>
78 #include <dev/mpr/mpi/mpi2_ioc.h>
79 #include <dev/mpr/mpi/mpi2_sas.h>
80 #include <dev/mpr/mpi/mpi2_pci.h>
81 #include <dev/mpr/mpi/mpi2_cnfg.h>
82 #include <dev/mpr/mpi/mpi2_init.h>
83 #include <dev/mpr/mpi/mpi2_tool.h>
84 #include <dev/mpr/mpr_ioctl.h>
85 #include <dev/mpr/mprvar.h>
86 #include <dev/mpr/mpr_table.h>
87 #include <dev/mpr/mpr_sas.h>
89 #define MPRSAS_DISCOVERY_TIMEOUT 20
90 #define MPRSAS_MAX_DISCOVERY_TIMEOUTS 10 /* 200 seconds */
93 * static array to check SCSI OpCode for EEDP protection bits
95 #define PRO_R MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP
96 #define PRO_W MPI2_SCSIIO_EEDPFLAGS_INSERT_OP
97 #define PRO_V MPI2_SCSIIO_EEDPFLAGS_INSERT_OP
98 static uint8_t op_code_prot[256] = {
99 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
100 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
101 0, 0, 0, 0, 0, 0, 0, 0, PRO_R, 0, PRO_W, 0, 0, 0, PRO_W, PRO_V,
102 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
103 0, PRO_W, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
104 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
105 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
106 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
107 0, 0, 0, 0, 0, 0, 0, 0, PRO_R, 0, PRO_W, 0, 0, 0, PRO_W, PRO_V,
108 0, 0, 0, PRO_W, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
109 0, 0, 0, 0, 0, 0, 0, 0, PRO_R, 0, PRO_W, 0, 0, 0, PRO_W, PRO_V,
110 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
111 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
112 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
113 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
114 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
117 MALLOC_DEFINE(M_MPRSAS, "MPRSAS", "MPR SAS memory");
119 static void mprsas_remove_device(struct mpr_softc *, struct mpr_command *);
120 static void mprsas_remove_complete(struct mpr_softc *, struct mpr_command *);
121 static void mprsas_action(struct cam_sim *sim, union ccb *ccb);
122 static void mprsas_poll(struct cam_sim *sim);
123 static void mprsas_scsiio_timeout(void *data);
124 static void mprsas_abort_complete(struct mpr_softc *sc, struct mpr_command *cm);
125 static void mprsas_action_scsiio(struct mprsas_softc *, union ccb *);
126 static void mprsas_scsiio_complete(struct mpr_softc *, struct mpr_command *);
127 static void mprsas_action_resetdev(struct mprsas_softc *, union ccb *);
128 static void mprsas_resetdev_complete(struct mpr_softc *, struct mpr_command *);
129 static int mprsas_send_abort(struct mpr_softc *sc, struct mpr_command *tm,
130 struct mpr_command *cm);
131 static void mprsas_async(void *callback_arg, uint32_t code,
132 struct cam_path *path, void *arg);
133 static int mprsas_send_portenable(struct mpr_softc *sc);
134 static void mprsas_portenable_complete(struct mpr_softc *sc,
135 struct mpr_command *cm);
137 static void mprsas_smpio_complete(struct mpr_softc *sc, struct mpr_command *cm);
138 static void mprsas_send_smpcmd(struct mprsas_softc *sassc, union ccb *ccb,
140 static void mprsas_action_smpio(struct mprsas_softc *sassc, union ccb *ccb);
142 struct mprsas_target *
143 mprsas_find_target_by_handle(struct mprsas_softc *sassc, int start,
146 struct mprsas_target *target;
149 for (i = start; i < sassc->maxtargets; i++) {
150 target = &sassc->targets[i];
151 if (target->handle == handle)
158 /* we need to freeze the simq during attach and diag reset, to avoid failing
159 * commands before device handles have been found by discovery. Since
160 * discovery involves reading config pages and possibly sending commands,
161 * discovery actions may continue even after we receive the end of discovery
162 * event, so refcount discovery actions instead of assuming we can unfreeze
163 * the simq when we get the event.
166 mprsas_startup_increment(struct mprsas_softc *sassc)
168 MPR_FUNCTRACE(sassc->sc);
170 if ((sassc->flags & MPRSAS_IN_STARTUP) != 0) {
171 if (sassc->startup_refcount++ == 0) {
172 /* just starting, freeze the simq */
173 mpr_dprint(sassc->sc, MPR_INIT,
174 "%s freezing simq\n", __func__);
176 xpt_freeze_simq(sassc->sim, 1);
178 mpr_dprint(sassc->sc, MPR_INIT, "%s refcount %u\n", __func__,
179 sassc->startup_refcount);
184 mprsas_release_simq_reinit(struct mprsas_softc *sassc)
186 if (sassc->flags & MPRSAS_QUEUE_FROZEN) {
187 sassc->flags &= ~MPRSAS_QUEUE_FROZEN;
188 xpt_release_simq(sassc->sim, 1);
189 mpr_dprint(sassc->sc, MPR_INFO, "Unfreezing SIM queue\n");
194 mprsas_startup_decrement(struct mprsas_softc *sassc)
196 MPR_FUNCTRACE(sassc->sc);
198 if ((sassc->flags & MPRSAS_IN_STARTUP) != 0) {
199 if (--sassc->startup_refcount == 0) {
200 /* finished all discovery-related actions, release
201 * the simq and rescan for the latest topology.
203 mpr_dprint(sassc->sc, MPR_INIT,
204 "%s releasing simq\n", __func__);
205 sassc->flags &= ~MPRSAS_IN_STARTUP;
206 xpt_release_simq(sassc->sim, 1);
209 mpr_dprint(sassc->sc, MPR_INIT, "%s refcount %u\n", __func__,
210 sassc->startup_refcount);
215 * The firmware requires us to stop sending commands when we're doing task
218 * XXX The logic for serializing the device has been made lazy and moved to
219 * mprsas_prepare_for_tm().
222 mprsas_alloc_tm(struct mpr_softc *sc)
224 MPI2_SCSI_TASK_MANAGE_REQUEST *req;
225 struct mpr_command *tm;
228 tm = mpr_alloc_high_priority_command(sc);
232 req = (MPI2_SCSI_TASK_MANAGE_REQUEST *)tm->cm_req;
233 req->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
238 mprsas_free_tm(struct mpr_softc *sc, struct mpr_command *tm)
240 int target_id = 0xFFFFFFFF;
247 * For TM's the devq is frozen for the device. Unfreeze it here and
248 * free the resources used for freezing the devq. Must clear the
249 * INRESET flag as well or scsi I/O will not work.
251 if (tm->cm_targ != NULL) {
252 tm->cm_targ->flags &= ~MPRSAS_TARGET_INRESET;
253 target_id = tm->cm_targ->tid;
256 mpr_dprint(sc, MPR_INFO, "Unfreezing devq for target ID %d\n",
258 xpt_release_devq(tm->cm_ccb->ccb_h.path, 1, TRUE);
259 xpt_free_path(tm->cm_ccb->ccb_h.path);
260 xpt_free_ccb(tm->cm_ccb);
263 mpr_free_high_priority_command(sc, tm);
267 mprsas_rescan_target(struct mpr_softc *sc, struct mprsas_target *targ)
269 struct mprsas_softc *sassc = sc->sassc;
271 target_id_t targetid;
275 pathid = cam_sim_path(sassc->sim);
277 targetid = CAM_TARGET_WILDCARD;
279 targetid = targ - sassc->targets;
282 * Allocate a CCB and schedule a rescan.
284 ccb = xpt_alloc_ccb_nowait();
286 mpr_dprint(sc, MPR_ERROR, "unable to alloc CCB for rescan\n");
290 if (xpt_create_path(&ccb->ccb_h.path, NULL, pathid, targetid,
291 CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
292 mpr_dprint(sc, MPR_ERROR, "unable to create path for rescan\n");
297 if (targetid == CAM_TARGET_WILDCARD)
298 ccb->ccb_h.func_code = XPT_SCAN_BUS;
300 ccb->ccb_h.func_code = XPT_SCAN_TGT;
302 mpr_dprint(sc, MPR_TRACE, "%s targetid %u\n", __func__, targetid);
307 mprsas_log_command(struct mpr_command *cm, u_int level, const char *fmt, ...)
317 /* No need to be in here if debugging isn't enabled */
318 if ((cm->cm_sc->mpr_debug & level) == 0)
321 sbuf_new(&sb, str, sizeof(str), 0);
325 if (cm->cm_ccb != NULL) {
326 xpt_path_string(cm->cm_ccb->csio.ccb_h.path, path_str,
328 sbuf_cat(&sb, path_str);
329 if (cm->cm_ccb->ccb_h.func_code == XPT_SCSI_IO) {
330 scsi_command_string(&cm->cm_ccb->csio, &sb);
331 sbuf_printf(&sb, "length %d ",
332 cm->cm_ccb->csio.dxfer_len);
335 sbuf_printf(&sb, "(noperiph:%s%d:%u:%u:%u): ",
336 cam_sim_name(cm->cm_sc->sassc->sim),
337 cam_sim_unit(cm->cm_sc->sassc->sim),
338 cam_sim_bus(cm->cm_sc->sassc->sim),
339 cm->cm_targ ? cm->cm_targ->tid : 0xFFFFFFFF,
343 sbuf_printf(&sb, "SMID %u ", cm->cm_desc.Default.SMID);
344 sbuf_vprintf(&sb, fmt, ap);
346 mpr_print_field(cm->cm_sc, "%s", sbuf_data(&sb));
352 mprsas_remove_volume(struct mpr_softc *sc, struct mpr_command *tm)
354 MPI2_SCSI_TASK_MANAGE_REPLY *reply;
355 struct mprsas_target *targ;
360 reply = (MPI2_SCSI_TASK_MANAGE_REPLY *)tm->cm_reply;
361 handle = (uint16_t)(uintptr_t)tm->cm_complete_data;
365 /* XXX retry the remove after the diag reset completes? */
366 mpr_dprint(sc, MPR_FAULT, "%s NULL reply resetting device "
367 "0x%04x\n", __func__, handle);
368 mprsas_free_tm(sc, tm);
372 if ((le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK) !=
373 MPI2_IOCSTATUS_SUCCESS) {
374 mpr_dprint(sc, MPR_ERROR, "IOCStatus = 0x%x while resetting "
375 "device 0x%x\n", le16toh(reply->IOCStatus), handle);
378 mpr_dprint(sc, MPR_XINFO, "Reset aborted %u commands\n",
379 le32toh(reply->TerminationCount));
380 mpr_free_reply(sc, tm->cm_reply_data);
381 tm->cm_reply = NULL; /* Ensures the reply won't get re-freed */
383 mpr_dprint(sc, MPR_XINFO, "clearing target %u handle 0x%04x\n",
387 * Don't clear target if remove fails because things will get confusing.
388 * Leave the devname and sasaddr intact so that we know to avoid reusing
389 * this target id if possible, and so we can assign the same target id
390 * to this device if it comes back in the future.
392 if ((le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK) ==
393 MPI2_IOCSTATUS_SUCCESS) {
396 targ->encl_handle = 0x0;
397 targ->encl_level_valid = 0x0;
398 targ->encl_level = 0x0;
399 targ->connector_name[0] = ' ';
400 targ->connector_name[1] = ' ';
401 targ->connector_name[2] = ' ';
402 targ->connector_name[3] = ' ';
403 targ->encl_slot = 0x0;
404 targ->exp_dev_handle = 0x0;
406 targ->linkrate = 0x0;
409 targ->scsi_req_desc_type = 0;
412 mprsas_free_tm(sc, tm);
416 * No Need to call "MPI2_SAS_OP_REMOVE_DEVICE" For Volume removal.
417 * Otherwise Volume Delete is same as Bare Drive Removal.
420 mprsas_prepare_volume_remove(struct mprsas_softc *sassc, uint16_t handle)
422 MPI2_SCSI_TASK_MANAGE_REQUEST *req;
423 struct mpr_softc *sc;
424 struct mpr_command *cm;
425 struct mprsas_target *targ = NULL;
427 MPR_FUNCTRACE(sassc->sc);
430 targ = mprsas_find_target_by_handle(sassc, 0, handle);
432 /* FIXME: what is the action? */
433 /* We don't know about this device? */
434 mpr_dprint(sc, MPR_ERROR,
435 "%s %d : invalid handle 0x%x \n", __func__,__LINE__, handle);
439 targ->flags |= MPRSAS_TARGET_INREMOVAL;
441 cm = mprsas_alloc_tm(sc);
443 mpr_dprint(sc, MPR_ERROR,
444 "%s: command alloc failure\n", __func__);
448 mprsas_rescan_target(sc, targ);
450 req = (MPI2_SCSI_TASK_MANAGE_REQUEST *)cm->cm_req;
451 req->DevHandle = targ->handle;
452 req->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
454 if (!targ->is_nvme || sc->custom_nvme_tm_handling) {
455 /* SAS Hard Link Reset / SATA Link Reset */
456 req->MsgFlags = MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET;
458 /* PCIe Protocol Level Reset*/
460 MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE;
465 cm->cm_complete = mprsas_remove_volume;
466 cm->cm_complete_data = (void *)(uintptr_t)handle;
468 mpr_dprint(sc, MPR_INFO, "%s: Sending reset for target ID %d\n",
469 __func__, targ->tid);
470 mprsas_prepare_for_tm(sc, cm, targ, CAM_LUN_WILDCARD);
472 mpr_map_command(sc, cm);
476 * The firmware performs debounce on the link to avoid transient link errors
477 * and false removals. When it does decide that link has been lost and a
478 * device needs to go away, it expects that the host will perform a target reset
479 * and then an op remove. The reset has the side-effect of aborting any
480 * outstanding requests for the device, which is required for the op-remove to
481 * succeed. It's not clear if the host should check for the device coming back
482 * alive after the reset.
485 mprsas_prepare_remove(struct mprsas_softc *sassc, uint16_t handle)
487 MPI2_SCSI_TASK_MANAGE_REQUEST *req;
488 struct mpr_softc *sc;
489 struct mpr_command *tm;
490 struct mprsas_target *targ = NULL;
492 MPR_FUNCTRACE(sassc->sc);
496 targ = mprsas_find_target_by_handle(sassc, 0, handle);
498 /* FIXME: what is the action? */
499 /* We don't know about this device? */
500 mpr_dprint(sc, MPR_ERROR, "%s : invalid handle 0x%x \n",
505 targ->flags |= MPRSAS_TARGET_INREMOVAL;
507 tm = mprsas_alloc_tm(sc);
509 mpr_dprint(sc, MPR_ERROR, "%s: command alloc failure\n",
514 mprsas_rescan_target(sc, targ);
516 req = (MPI2_SCSI_TASK_MANAGE_REQUEST *)tm->cm_req;
517 req->DevHandle = htole16(targ->handle);
518 req->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
520 /* SAS Hard Link Reset / SATA Link Reset */
521 req->MsgFlags = MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET;
525 tm->cm_complete = mprsas_remove_device;
526 tm->cm_complete_data = (void *)(uintptr_t)handle;
528 mpr_dprint(sc, MPR_INFO, "%s: Sending reset for target ID %d\n",
529 __func__, targ->tid);
530 mprsas_prepare_for_tm(sc, tm, targ, CAM_LUN_WILDCARD);
532 mpr_map_command(sc, tm);
536 mprsas_remove_device(struct mpr_softc *sc, struct mpr_command *tm)
538 MPI2_SCSI_TASK_MANAGE_REPLY *reply;
539 MPI2_SAS_IOUNIT_CONTROL_REQUEST *req;
540 struct mprsas_target *targ;
545 reply = (MPI2_SCSI_TASK_MANAGE_REPLY *)tm->cm_reply;
546 handle = (uint16_t)(uintptr_t)tm->cm_complete_data;
550 * Currently there should be no way we can hit this case. It only
551 * happens when we have a failure to allocate chain frames, and
552 * task management commands don't have S/G lists.
554 if ((tm->cm_flags & MPR_CM_FLAGS_ERROR_MASK) != 0) {
555 mpr_dprint(sc, MPR_ERROR, "%s: cm_flags = %#x for remove of "
556 "handle %#04x! This should not happen!\n", __func__,
557 tm->cm_flags, handle);
561 /* XXX retry the remove after the diag reset completes? */
562 mpr_dprint(sc, MPR_FAULT, "%s NULL reply resetting device "
563 "0x%04x\n", __func__, handle);
564 mprsas_free_tm(sc, tm);
568 if ((le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK) !=
569 MPI2_IOCSTATUS_SUCCESS) {
570 mpr_dprint(sc, MPR_ERROR, "IOCStatus = 0x%x while resetting "
571 "device 0x%x\n", le16toh(reply->IOCStatus), handle);
574 mpr_dprint(sc, MPR_XINFO, "Reset aborted %u commands\n",
575 le32toh(reply->TerminationCount));
576 mpr_free_reply(sc, tm->cm_reply_data);
577 tm->cm_reply = NULL; /* Ensures the reply won't get re-freed */
579 /* Reuse the existing command */
580 req = (MPI2_SAS_IOUNIT_CONTROL_REQUEST *)tm->cm_req;
581 memset(req, 0, sizeof(*req));
582 req->Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL;
583 req->Operation = MPI2_SAS_OP_REMOVE_DEVICE;
584 req->DevHandle = htole16(handle);
586 tm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
587 tm->cm_complete = mprsas_remove_complete;
588 tm->cm_complete_data = (void *)(uintptr_t)handle;
591 * Wait to send the REMOVE_DEVICE until all the commands have cleared.
592 * They should be aborted or time out and we'll kick thus off there
595 if (TAILQ_FIRST(&targ->commands) == NULL) {
596 mpr_dprint(sc, MPR_INFO, "No pending commands: starting remove_device\n");
597 mpr_map_command(sc, tm);
598 targ->pending_remove_tm = NULL;
600 targ->pending_remove_tm = tm;
603 mpr_dprint(sc, MPR_INFO, "clearing target %u handle 0x%04x\n",
605 if (targ->encl_level_valid) {
606 mpr_dprint(sc, MPR_INFO, "At enclosure level %d, slot %d, "
607 "connector name (%4s)\n", targ->encl_level, targ->encl_slot,
608 targ->connector_name);
613 mprsas_remove_complete(struct mpr_softc *sc, struct mpr_command *tm)
615 MPI2_SAS_IOUNIT_CONTROL_REPLY *reply;
617 struct mprsas_target *targ;
618 struct mprsas_lun *lun;
622 reply = (MPI2_SAS_IOUNIT_CONTROL_REPLY *)tm->cm_reply;
623 handle = (uint16_t)(uintptr_t)tm->cm_complete_data;
628 * At this point, we should have no pending commands for the target.
629 * The remove target has just completed.
631 KASSERT(TAILQ_FIRST(&targ->commands) == NULL,
632 ("%s: no commands should be pending\n", __func__));
635 * Currently there should be no way we can hit this case. It only
636 * happens when we have a failure to allocate chain frames, and
637 * task management commands don't have S/G lists.
639 if ((tm->cm_flags & MPR_CM_FLAGS_ERROR_MASK) != 0) {
640 mpr_dprint(sc, MPR_XINFO, "%s: cm_flags = %#x for remove of "
641 "handle %#04x! This should not happen!\n", __func__,
642 tm->cm_flags, handle);
643 mprsas_free_tm(sc, tm);
648 /* most likely a chip reset */
649 mpr_dprint(sc, MPR_FAULT, "%s NULL reply removing device "
650 "0x%04x\n", __func__, handle);
651 mprsas_free_tm(sc, tm);
655 mpr_dprint(sc, MPR_XINFO, "%s on handle 0x%04x, IOCStatus= 0x%x\n",
656 __func__, handle, le16toh(reply->IOCStatus));
659 * Don't clear target if remove fails because things will get confusing.
660 * Leave the devname and sasaddr intact so that we know to avoid reusing
661 * this target id if possible, and so we can assign the same target id
662 * to this device if it comes back in the future.
664 if ((le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK) ==
665 MPI2_IOCSTATUS_SUCCESS) {
667 targ->encl_handle = 0x0;
668 targ->encl_level_valid = 0x0;
669 targ->encl_level = 0x0;
670 targ->connector_name[0] = ' ';
671 targ->connector_name[1] = ' ';
672 targ->connector_name[2] = ' ';
673 targ->connector_name[3] = ' ';
674 targ->encl_slot = 0x0;
675 targ->exp_dev_handle = 0x0;
677 targ->linkrate = 0x0;
680 targ->scsi_req_desc_type = 0;
682 while (!SLIST_EMPTY(&targ->luns)) {
683 lun = SLIST_FIRST(&targ->luns);
684 SLIST_REMOVE_HEAD(&targ->luns, lun_link);
689 mprsas_free_tm(sc, tm);
693 mprsas_register_events(struct mpr_softc *sc)
698 setbit(events, MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE);
699 setbit(events, MPI2_EVENT_SAS_DISCOVERY);
700 setbit(events, MPI2_EVENT_SAS_BROADCAST_PRIMITIVE);
701 setbit(events, MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE);
702 setbit(events, MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW);
703 setbit(events, MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST);
704 setbit(events, MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE);
705 setbit(events, MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST);
706 setbit(events, MPI2_EVENT_IR_VOLUME);
707 setbit(events, MPI2_EVENT_IR_PHYSICAL_DISK);
708 setbit(events, MPI2_EVENT_IR_OPERATION_STATUS);
709 setbit(events, MPI2_EVENT_TEMP_THRESHOLD);
710 setbit(events, MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR);
711 if (sc->facts->MsgVersion >= MPI2_VERSION_02_06) {
712 setbit(events, MPI2_EVENT_ACTIVE_CABLE_EXCEPTION);
713 if (sc->mpr_flags & MPR_FLAGS_GEN35_IOC) {
714 setbit(events, MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE);
715 setbit(events, MPI2_EVENT_PCIE_ENUMERATION);
716 setbit(events, MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST);
720 mpr_register_events(sc, events, mprsas_evt_handler, NULL,
721 &sc->sassc->mprsas_eh);
727 mpr_attach_sas(struct mpr_softc *sc)
729 struct mprsas_softc *sassc;
731 int unit, error = 0, reqs;
734 mpr_dprint(sc, MPR_INIT, "%s entered\n", __func__);
736 sassc = malloc(sizeof(struct mprsas_softc), M_MPR, M_WAITOK|M_ZERO);
739 * XXX MaxTargets could change during a reinit. Since we don't
740 * resize the targets[] array during such an event, cache the value
741 * of MaxTargets here so that we don't get into trouble later. This
742 * should move into the reinit logic.
744 sassc->maxtargets = sc->facts->MaxTargets + sc->facts->MaxVolumes;
745 sassc->targets = malloc(sizeof(struct mprsas_target) *
746 sassc->maxtargets, M_MPR, M_WAITOK|M_ZERO);
750 reqs = sc->num_reqs - sc->num_prireqs - 1;
751 if ((sassc->devq = cam_simq_alloc(reqs)) == NULL) {
752 mpr_dprint(sc, MPR_INIT|MPR_ERROR, "Cannot allocate SIMQ\n");
757 unit = device_get_unit(sc->mpr_dev);
758 sassc->sim = cam_sim_alloc(mprsas_action, mprsas_poll, "mpr", sassc,
759 unit, &sc->mpr_mtx, reqs, reqs, sassc->devq);
760 if (sassc->sim == NULL) {
761 mpr_dprint(sc, MPR_INIT|MPR_ERROR, "Cannot allocate SIM\n");
766 TAILQ_INIT(&sassc->ev_queue);
768 /* Initialize taskqueue for Event Handling */
769 TASK_INIT(&sassc->ev_task, 0, mprsas_firmware_event_work, sc);
770 sassc->ev_tq = taskqueue_create("mpr_taskq", M_NOWAIT | M_ZERO,
771 taskqueue_thread_enqueue, &sassc->ev_tq);
772 taskqueue_start_threads(&sassc->ev_tq, 1, PRIBIO, "%s taskq",
773 device_get_nameunit(sc->mpr_dev));
778 * XXX There should be a bus for every port on the adapter, but since
779 * we're just going to fake the topology for now, we'll pretend that
780 * everything is just a target on a single bus.
782 if ((error = xpt_bus_register(sassc->sim, sc->mpr_dev, 0)) != 0) {
783 mpr_dprint(sc, MPR_INIT|MPR_ERROR,
784 "Error %d registering SCSI bus\n", error);
790 * Assume that discovery events will start right away.
792 * Hold off boot until discovery is complete.
794 sassc->flags |= MPRSAS_IN_STARTUP | MPRSAS_IN_DISCOVERY;
795 sc->sassc->startup_refcount = 0;
796 mprsas_startup_increment(sassc);
798 callout_init(&sassc->discovery_callout, 1 /*mpsafe*/);
801 * Register for async events so we can determine the EEDP
802 * capabilities of devices.
804 status = xpt_create_path(&sassc->path, /*periph*/NULL,
805 cam_sim_path(sc->sassc->sim), CAM_TARGET_WILDCARD,
807 if (status != CAM_REQ_CMP) {
808 mpr_dprint(sc, MPR_INIT|MPR_ERROR,
809 "Error %#x creating sim path\n", status);
814 event = AC_ADVINFO_CHANGED | AC_FOUND_DEVICE;
815 status = xpt_register_async(event, mprsas_async, sc,
818 if (status != CAM_REQ_CMP) {
819 mpr_dprint(sc, MPR_ERROR,
820 "Error %#x registering async handler for "
821 "AC_ADVINFO_CHANGED events\n", status);
822 xpt_free_path(sassc->path);
826 if (status != CAM_REQ_CMP) {
828 * EEDP use is the exception, not the rule.
829 * Warn the user, but do not fail to attach.
831 mpr_printf(sc, "EEDP capabilities disabled.\n");
836 mprsas_register_events(sc);
841 mpr_dprint(sc, MPR_INIT, "%s exit, error= %d\n", __func__, error);
846 mpr_detach_sas(struct mpr_softc *sc)
848 struct mprsas_softc *sassc;
849 struct mprsas_lun *lun, *lun_tmp;
850 struct mprsas_target *targ;
855 if (sc->sassc == NULL)
859 mpr_deregister_events(sc, sassc->mprsas_eh);
862 * Drain and free the event handling taskqueue with the lock
863 * unheld so that any parallel processing tasks drain properly
864 * without deadlocking.
866 if (sassc->ev_tq != NULL)
867 taskqueue_free(sassc->ev_tq);
869 /* Make sure CAM doesn't wedge if we had to bail out early. */
872 while (sassc->startup_refcount != 0)
873 mprsas_startup_decrement(sassc);
875 /* Deregister our async handler */
876 if (sassc->path != NULL) {
877 xpt_register_async(0, mprsas_async, sc, sassc->path);
878 xpt_free_path(sassc->path);
882 if (sassc->flags & MPRSAS_IN_STARTUP)
883 xpt_release_simq(sassc->sim, 1);
885 if (sassc->sim != NULL) {
886 xpt_bus_deregister(cam_sim_path(sassc->sim));
887 cam_sim_free(sassc->sim, FALSE);
892 if (sassc->devq != NULL)
893 cam_simq_free(sassc->devq);
895 for (i = 0; i < sassc->maxtargets; i++) {
896 targ = &sassc->targets[i];
897 SLIST_FOREACH_SAFE(lun, &targ->luns, lun_link, lun_tmp) {
901 free(sassc->targets, M_MPR);
909 mprsas_discovery_end(struct mprsas_softc *sassc)
911 struct mpr_softc *sc = sassc->sc;
915 if (sassc->flags & MPRSAS_DISCOVERY_TIMEOUT_PENDING)
916 callout_stop(&sassc->discovery_callout);
919 * After discovery has completed, check the mapping table for any
920 * missing devices and update their missing counts. Only do this once
921 * whenever the driver is initialized so that missing counts aren't
922 * updated unnecessarily. Note that just because discovery has
923 * completed doesn't mean that events have been processed yet. The
924 * check_devices function is a callout timer that checks if ALL devices
925 * are missing. If so, it will wait a little longer for events to
926 * complete and keep resetting itself until some device in the mapping
927 * table is not missing, meaning that event processing has started.
929 if (sc->track_mapping_events) {
930 mpr_dprint(sc, MPR_XINFO | MPR_MAPPING, "Discovery has "
931 "completed. Check for missing devices in the mapping "
933 callout_reset(&sc->device_check_callout,
934 MPR_MISSING_CHECK_DELAY * hz, mpr_mapping_check_devices,
940 mprsas_action(struct cam_sim *sim, union ccb *ccb)
942 struct mprsas_softc *sassc;
944 sassc = cam_sim_softc(sim);
946 MPR_FUNCTRACE(sassc->sc);
947 mpr_dprint(sassc->sc, MPR_TRACE, "ccb func_code 0x%x\n",
948 ccb->ccb_h.func_code);
949 mtx_assert(&sassc->sc->mpr_mtx, MA_OWNED);
951 switch (ccb->ccb_h.func_code) {
954 struct ccb_pathinq *cpi = &ccb->cpi;
955 struct mpr_softc *sc = sassc->sc;
957 cpi->version_num = 1;
958 cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE|PI_WIDE_16;
959 cpi->target_sprt = 0;
960 cpi->hba_misc = PIM_NOBUSRESET | PIM_UNMAPPED | PIM_NOSCAN;
961 cpi->hba_eng_cnt = 0;
962 cpi->max_target = sassc->maxtargets - 1;
966 * initiator_id is set here to an ID outside the set of valid
967 * target IDs (including volumes).
969 cpi->initiator_id = sassc->maxtargets;
970 strlcpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
971 strlcpy(cpi->hba_vid, "Avago Tech", HBA_IDLEN);
972 strlcpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
973 cpi->unit_number = cam_sim_unit(sim);
974 cpi->bus_id = cam_sim_bus(sim);
976 * XXXSLM-I think this needs to change based on config page or
977 * something instead of hardcoded to 150000.
979 cpi->base_transfer_speed = 150000;
980 cpi->transport = XPORT_SAS;
981 cpi->transport_version = 0;
982 cpi->protocol = PROTO_SCSI;
983 cpi->protocol_version = SCSI_REV_SPC;
984 cpi->maxio = sc->maxio;
985 mprsas_set_ccbstatus(ccb, CAM_REQ_CMP);
988 case XPT_GET_TRAN_SETTINGS:
990 struct ccb_trans_settings *cts;
991 struct ccb_trans_settings_sas *sas;
992 struct ccb_trans_settings_scsi *scsi;
993 struct mprsas_target *targ;
996 sas = &cts->xport_specific.sas;
997 scsi = &cts->proto_specific.scsi;
999 KASSERT(cts->ccb_h.target_id < sassc->maxtargets,
1000 ("Target %d out of bounds in XPT_GET_TRAN_SETTINGS\n",
1001 cts->ccb_h.target_id));
1002 targ = &sassc->targets[cts->ccb_h.target_id];
1003 if (targ->handle == 0x0) {
1004 mprsas_set_ccbstatus(ccb, CAM_DEV_NOT_THERE);
1008 cts->protocol_version = SCSI_REV_SPC2;
1009 cts->transport = XPORT_SAS;
1010 cts->transport_version = 0;
1012 sas->valid = CTS_SAS_VALID_SPEED;
1013 switch (targ->linkrate) {
1015 sas->bitrate = 150000;
1018 sas->bitrate = 300000;
1021 sas->bitrate = 600000;
1024 sas->bitrate = 1200000;
1030 cts->protocol = PROTO_SCSI;
1031 scsi->valid = CTS_SCSI_VALID_TQ;
1032 scsi->flags = CTS_SCSI_FLAGS_TAG_ENB;
1034 mprsas_set_ccbstatus(ccb, CAM_REQ_CMP);
1037 case XPT_CALC_GEOMETRY:
1038 cam_calc_geometry(&ccb->ccg, /*extended*/1);
1039 mprsas_set_ccbstatus(ccb, CAM_REQ_CMP);
1042 mpr_dprint(sassc->sc, MPR_XINFO, "mprsas_action "
1044 mprsas_action_resetdev(sassc, ccb);
1049 mpr_dprint(sassc->sc, MPR_XINFO, "mprsas_action faking success "
1050 "for abort or reset\n");
1051 mprsas_set_ccbstatus(ccb, CAM_REQ_CMP);
1054 mprsas_action_scsiio(sassc, ccb);
1057 mprsas_action_smpio(sassc, ccb);
1060 mprsas_set_ccbstatus(ccb, CAM_FUNC_NOTAVAIL);
1068 mprsas_announce_reset(struct mpr_softc *sc, uint32_t ac_code,
1069 target_id_t target_id, lun_id_t lun_id)
1071 path_id_t path_id = cam_sim_path(sc->sassc->sim);
1072 struct cam_path *path;
1074 mpr_dprint(sc, MPR_XINFO, "%s code %x target %d lun %jx\n", __func__,
1075 ac_code, target_id, (uintmax_t)lun_id);
1077 if (xpt_create_path(&path, NULL,
1078 path_id, target_id, lun_id) != CAM_REQ_CMP) {
1079 mpr_dprint(sc, MPR_ERROR, "unable to create path for reset "
1084 xpt_async(ac_code, path, NULL);
1085 xpt_free_path(path);
1089 mprsas_complete_all_commands(struct mpr_softc *sc)
1091 struct mpr_command *cm;
1096 mtx_assert(&sc->mpr_mtx, MA_OWNED);
1098 /* complete all commands with a NULL reply */
1099 for (i = 1; i < sc->num_reqs; i++) {
1100 cm = &sc->commands[i];
1101 if (cm->cm_state == MPR_CM_STATE_FREE)
1104 cm->cm_state = MPR_CM_STATE_BUSY;
1105 cm->cm_reply = NULL;
1108 if (cm->cm_flags & MPR_CM_FLAGS_SATA_ID_TIMEOUT) {
1110 free(cm->cm_data, M_MPR);
1114 if (cm->cm_flags & MPR_CM_FLAGS_POLLED)
1115 cm->cm_flags |= MPR_CM_FLAGS_COMPLETE;
1117 if (cm->cm_complete != NULL) {
1118 mprsas_log_command(cm, MPR_RECOVERY,
1119 "completing cm %p state %x ccb %p for diag reset\n",
1120 cm, cm->cm_state, cm->cm_ccb);
1121 cm->cm_complete(sc, cm);
1123 } else if (cm->cm_flags & MPR_CM_FLAGS_WAKEUP) {
1124 mprsas_log_command(cm, MPR_RECOVERY,
1125 "waking up cm %p state %x ccb %p for diag reset\n",
1126 cm, cm->cm_state, cm->cm_ccb);
1131 if ((completed == 0) && (cm->cm_state != MPR_CM_STATE_FREE)) {
1132 /* this should never happen, but if it does, log */
1133 mprsas_log_command(cm, MPR_RECOVERY,
1134 "cm %p state %x flags 0x%x ccb %p during diag "
1135 "reset\n", cm, cm->cm_state, cm->cm_flags,
1140 sc->io_cmds_active = 0;
1144 mprsas_handle_reinit(struct mpr_softc *sc)
1148 /* Go back into startup mode and freeze the simq, so that CAM
1149 * doesn't send any commands until after we've rediscovered all
1150 * targets and found the proper device handles for them.
1152 * After the reset, portenable will trigger discovery, and after all
1153 * discovery-related activities have finished, the simq will be
1156 mpr_dprint(sc, MPR_INIT, "%s startup\n", __func__);
1157 sc->sassc->flags |= MPRSAS_IN_STARTUP;
1158 sc->sassc->flags |= MPRSAS_IN_DISCOVERY;
1159 mprsas_startup_increment(sc->sassc);
1161 /* notify CAM of a bus reset */
1162 mprsas_announce_reset(sc, AC_BUS_RESET, CAM_TARGET_WILDCARD,
1165 /* complete and cleanup after all outstanding commands */
1166 mprsas_complete_all_commands(sc);
1168 mpr_dprint(sc, MPR_INIT, "%s startup %u after command completion\n",
1169 __func__, sc->sassc->startup_refcount);
1171 /* zero all the target handles, since they may change after the
1172 * reset, and we have to rediscover all the targets and use the new
1175 for (i = 0; i < sc->sassc->maxtargets; i++) {
1176 if (sc->sassc->targets[i].outstanding != 0)
1177 mpr_dprint(sc, MPR_INIT, "target %u outstanding %u\n",
1178 i, sc->sassc->targets[i].outstanding);
1179 sc->sassc->targets[i].handle = 0x0;
1180 sc->sassc->targets[i].exp_dev_handle = 0x0;
1181 sc->sassc->targets[i].outstanding = 0;
1182 sc->sassc->targets[i].flags = MPRSAS_TARGET_INDIAGRESET;
1186 mprsas_tm_timeout(void *data)
1188 struct mpr_command *tm = data;
1189 struct mpr_softc *sc = tm->cm_sc;
1191 mtx_assert(&sc->mpr_mtx, MA_OWNED);
1193 mprsas_log_command(tm, MPR_INFO|MPR_RECOVERY, "task mgmt %p timed "
1196 KASSERT(tm->cm_state == MPR_CM_STATE_INQUEUE,
1197 ("command not inqueue, state = %u\n", tm->cm_state));
1199 tm->cm_state = MPR_CM_STATE_BUSY;
1204 mprsas_logical_unit_reset_complete(struct mpr_softc *sc, struct mpr_command *tm)
1206 MPI2_SCSI_TASK_MANAGE_REPLY *reply;
1207 MPI2_SCSI_TASK_MANAGE_REQUEST *req;
1208 unsigned int cm_count = 0;
1209 struct mpr_command *cm;
1210 struct mprsas_target *targ;
1212 callout_stop(&tm->cm_callout);
1214 req = (MPI2_SCSI_TASK_MANAGE_REQUEST *)tm->cm_req;
1215 reply = (MPI2_SCSI_TASK_MANAGE_REPLY *)tm->cm_reply;
1219 * Currently there should be no way we can hit this case. It only
1220 * happens when we have a failure to allocate chain frames, and
1221 * task management commands don't have S/G lists.
1223 if ((tm->cm_flags & MPR_CM_FLAGS_ERROR_MASK) != 0) {
1224 mpr_dprint(sc, MPR_RECOVERY|MPR_ERROR,
1225 "%s: cm_flags = %#x for LUN reset! "
1226 "This should not happen!\n", __func__, tm->cm_flags);
1227 mprsas_free_tm(sc, tm);
1231 if (reply == NULL) {
1232 mpr_dprint(sc, MPR_RECOVERY, "NULL reset reply for tm %p\n",
1234 if ((sc->mpr_flags & MPR_FLAGS_DIAGRESET) != 0) {
1235 /* this completion was due to a reset, just cleanup */
1236 mpr_dprint(sc, MPR_RECOVERY, "Hardware undergoing "
1237 "reset, ignoring NULL LUN reset reply\n");
1239 mprsas_free_tm(sc, tm);
1242 /* we should have gotten a reply. */
1243 mpr_dprint(sc, MPR_INFO|MPR_RECOVERY, "NULL reply on "
1244 "LUN reset attempt, resetting controller\n");
1250 mpr_dprint(sc, MPR_RECOVERY,
1251 "logical unit reset status 0x%x code 0x%x count %u\n",
1252 le16toh(reply->IOCStatus), le32toh(reply->ResponseCode),
1253 le32toh(reply->TerminationCount));
1256 * See if there are any outstanding commands for this LUN.
1257 * This could be made more efficient by using a per-LU data
1258 * structure of some sort.
1260 TAILQ_FOREACH(cm, &targ->commands, cm_link) {
1261 if (cm->cm_lun == tm->cm_lun)
1265 if (cm_count == 0) {
1266 mpr_dprint(sc, MPR_RECOVERY|MPR_INFO,
1267 "Finished recovery after LUN reset for target %u\n",
1270 mprsas_announce_reset(sc, AC_SENT_BDR, targ->tid,
1274 * We've finished recovery for this logical unit. check and
1275 * see if some other logical unit has a timedout command
1276 * that needs to be processed.
1278 cm = TAILQ_FIRST(&targ->timedout_commands);
1280 mpr_dprint(sc, MPR_INFO|MPR_RECOVERY,
1281 "More commands to abort for target %u\n", targ->tid);
1282 mprsas_send_abort(sc, tm, cm);
1285 mprsas_free_tm(sc, tm);
1288 /* if we still have commands for this LUN, the reset
1289 * effectively failed, regardless of the status reported.
1290 * Escalate to a target reset.
1292 mpr_dprint(sc, MPR_INFO|MPR_RECOVERY,
1293 "logical unit reset complete for target %u, but still "
1294 "have %u command(s), sending target reset\n", targ->tid,
1296 if (!targ->is_nvme || sc->custom_nvme_tm_handling)
1297 mprsas_send_reset(sc, tm,
1298 MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET);
1305 mprsas_target_reset_complete(struct mpr_softc *sc, struct mpr_command *tm)
1307 MPI2_SCSI_TASK_MANAGE_REPLY *reply;
1308 MPI2_SCSI_TASK_MANAGE_REQUEST *req;
1309 struct mprsas_target *targ;
1311 callout_stop(&tm->cm_callout);
1313 req = (MPI2_SCSI_TASK_MANAGE_REQUEST *)tm->cm_req;
1314 reply = (MPI2_SCSI_TASK_MANAGE_REPLY *)tm->cm_reply;
1318 * Currently there should be no way we can hit this case. It only
1319 * happens when we have a failure to allocate chain frames, and
1320 * task management commands don't have S/G lists.
1322 if ((tm->cm_flags & MPR_CM_FLAGS_ERROR_MASK) != 0) {
1323 mpr_dprint(sc, MPR_ERROR, "%s: cm_flags = %#x for target "
1324 "reset! This should not happen!\n", __func__, tm->cm_flags);
1325 mprsas_free_tm(sc, tm);
1329 if (reply == NULL) {
1330 mpr_dprint(sc, MPR_RECOVERY,
1331 "NULL target reset reply for tm %p TaskMID %u\n",
1332 tm, le16toh(req->TaskMID));
1333 if ((sc->mpr_flags & MPR_FLAGS_DIAGRESET) != 0) {
1334 /* this completion was due to a reset, just cleanup */
1335 mpr_dprint(sc, MPR_RECOVERY, "Hardware undergoing "
1336 "reset, ignoring NULL target reset reply\n");
1338 mprsas_free_tm(sc, tm);
1341 /* we should have gotten a reply. */
1342 mpr_dprint(sc, MPR_INFO|MPR_RECOVERY, "NULL reply on "
1343 "target reset attempt, resetting controller\n");
1349 mpr_dprint(sc, MPR_RECOVERY,
1350 "target reset status 0x%x code 0x%x count %u\n",
1351 le16toh(reply->IOCStatus), le32toh(reply->ResponseCode),
1352 le32toh(reply->TerminationCount));
1354 if (targ->outstanding == 0) {
1356 * We've finished recovery for this target and all
1357 * of its logical units.
1359 mpr_dprint(sc, MPR_RECOVERY|MPR_INFO,
1360 "Finished reset recovery for target %u\n", targ->tid);
1362 mprsas_announce_reset(sc, AC_SENT_BDR, tm->cm_targ->tid,
1366 mprsas_free_tm(sc, tm);
1369 * After a target reset, if this target still has
1370 * outstanding commands, the reset effectively failed,
1371 * regardless of the status reported. escalate.
1373 mpr_dprint(sc, MPR_INFO|MPR_RECOVERY,
1374 "Target reset complete for target %u, but still have %u "
1375 "command(s), resetting controller\n", targ->tid,
1381 #define MPR_RESET_TIMEOUT 30
1384 mprsas_send_reset(struct mpr_softc *sc, struct mpr_command *tm, uint8_t type)
1386 MPI2_SCSI_TASK_MANAGE_REQUEST *req;
1387 struct mprsas_target *target;
1390 target = tm->cm_targ;
1391 if (target->handle == 0) {
1392 mpr_dprint(sc, MPR_ERROR, "%s null devhandle for target_id "
1393 "%d\n", __func__, target->tid);
1397 req = (MPI2_SCSI_TASK_MANAGE_REQUEST *)tm->cm_req;
1398 req->DevHandle = htole16(target->handle);
1399 req->TaskType = type;
1401 if (!target->is_nvme || sc->custom_nvme_tm_handling) {
1402 timeout = MPR_RESET_TIMEOUT;
1404 * Target reset method =
1405 * SAS Hard Link Reset / SATA Link Reset
1407 req->MsgFlags = MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET;
1409 timeout = (target->controller_reset_timeout) ? (
1410 target->controller_reset_timeout) : (MPR_RESET_TIMEOUT);
1411 /* PCIe Protocol Level Reset*/
1413 MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE;
1416 if (type == MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET) {
1417 /* XXX Need to handle invalid LUNs */
1418 MPR_SET_LUN(req->LUN, tm->cm_lun);
1419 tm->cm_targ->logical_unit_resets++;
1420 mpr_dprint(sc, MPR_RECOVERY|MPR_INFO,
1421 "Sending logical unit reset to target %u lun %d\n",
1422 target->tid, tm->cm_lun);
1423 tm->cm_complete = mprsas_logical_unit_reset_complete;
1424 mprsas_prepare_for_tm(sc, tm, target, tm->cm_lun);
1425 } else if (type == MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET) {
1426 tm->cm_targ->target_resets++;
1427 mpr_dprint(sc, MPR_RECOVERY|MPR_INFO,
1428 "Sending target reset to target %u\n", target->tid);
1429 tm->cm_complete = mprsas_target_reset_complete;
1430 mprsas_prepare_for_tm(sc, tm, target, CAM_LUN_WILDCARD);
1433 mpr_dprint(sc, MPR_ERROR, "unexpected reset type 0x%x\n", type);
1437 if (target->encl_level_valid) {
1438 mpr_dprint(sc, MPR_RECOVERY|MPR_INFO,
1439 "At enclosure level %d, slot %d, connector name (%4s)\n",
1440 target->encl_level, target->encl_slot,
1441 target->connector_name);
1445 tm->cm_complete_data = (void *)tm;
1447 callout_reset(&tm->cm_callout, timeout * hz,
1448 mprsas_tm_timeout, tm);
1450 err = mpr_map_command(sc, tm);
1452 mpr_dprint(sc, MPR_ERROR|MPR_RECOVERY,
1453 "error %d sending reset type %u\n", err, type);
1459 mprsas_abort_complete(struct mpr_softc *sc, struct mpr_command *tm)
1461 struct mpr_command *cm;
1462 MPI2_SCSI_TASK_MANAGE_REPLY *reply;
1463 MPI2_SCSI_TASK_MANAGE_REQUEST *req;
1464 struct mprsas_target *targ;
1466 callout_stop(&tm->cm_callout);
1468 req = (MPI2_SCSI_TASK_MANAGE_REQUEST *)tm->cm_req;
1469 reply = (MPI2_SCSI_TASK_MANAGE_REPLY *)tm->cm_reply;
1473 * Currently there should be no way we can hit this case. It only
1474 * happens when we have a failure to allocate chain frames, and
1475 * task management commands don't have S/G lists.
1477 if ((tm->cm_flags & MPR_CM_FLAGS_ERROR_MASK) != 0) {
1478 mpr_dprint(sc, MPR_RECOVERY|MPR_ERROR,
1479 "cm_flags = %#x for abort %p TaskMID %u!\n",
1480 tm->cm_flags, tm, le16toh(req->TaskMID));
1481 mprsas_free_tm(sc, tm);
1485 if (reply == NULL) {
1486 mpr_dprint(sc, MPR_RECOVERY,
1487 "NULL abort reply for tm %p TaskMID %u\n",
1488 tm, le16toh(req->TaskMID));
1489 if ((sc->mpr_flags & MPR_FLAGS_DIAGRESET) != 0) {
1490 /* this completion was due to a reset, just cleanup */
1491 mpr_dprint(sc, MPR_RECOVERY, "Hardware undergoing "
1492 "reset, ignoring NULL abort reply\n");
1494 mprsas_free_tm(sc, tm);
1496 /* we should have gotten a reply. */
1497 mpr_dprint(sc, MPR_INFO|MPR_RECOVERY, "NULL reply on "
1498 "abort attempt, resetting controller\n");
1504 mpr_dprint(sc, MPR_RECOVERY,
1505 "abort TaskMID %u status 0x%x code 0x%x count %u\n",
1506 le16toh(req->TaskMID),
1507 le16toh(reply->IOCStatus), le32toh(reply->ResponseCode),
1508 le32toh(reply->TerminationCount));
1510 cm = TAILQ_FIRST(&tm->cm_targ->timedout_commands);
1513 * if there are no more timedout commands, we're done with
1514 * error recovery for this target.
1516 mpr_dprint(sc, MPR_INFO|MPR_RECOVERY,
1517 "Finished abort recovery for target %u\n", targ->tid);
1519 mprsas_free_tm(sc, tm);
1520 } else if (le16toh(req->TaskMID) != cm->cm_desc.Default.SMID) {
1521 /* abort success, but we have more timedout commands to abort */
1522 mpr_dprint(sc, MPR_INFO|MPR_RECOVERY,
1523 "Continuing abort recovery for target %u\n", targ->tid);
1524 mprsas_send_abort(sc, tm, cm);
1527 * we didn't get a command completion, so the abort
1528 * failed as far as we're concerned. escalate.
1530 mpr_dprint(sc, MPR_INFO|MPR_RECOVERY,
1531 "Abort failed for target %u, sending logical unit reset\n",
1534 mprsas_send_reset(sc, tm,
1535 MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET);
1539 #define MPR_ABORT_TIMEOUT 5
1542 mprsas_send_abort(struct mpr_softc *sc, struct mpr_command *tm,
1543 struct mpr_command *cm)
1545 MPI2_SCSI_TASK_MANAGE_REQUEST *req;
1546 struct mprsas_target *targ;
1550 if (targ->handle == 0) {
1551 mpr_dprint(sc, MPR_ERROR|MPR_RECOVERY,
1552 "%s null devhandle for target_id %d\n",
1553 __func__, cm->cm_ccb->ccb_h.target_id);
1557 mprsas_log_command(cm, MPR_RECOVERY|MPR_INFO,
1558 "Aborting command %p\n", cm);
1560 req = (MPI2_SCSI_TASK_MANAGE_REQUEST *)tm->cm_req;
1561 req->DevHandle = htole16(targ->handle);
1562 req->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK;
1564 /* XXX Need to handle invalid LUNs */
1565 MPR_SET_LUN(req->LUN, cm->cm_ccb->ccb_h.target_lun);
1567 req->TaskMID = htole16(cm->cm_desc.Default.SMID);
1570 tm->cm_complete = mprsas_abort_complete;
1571 tm->cm_complete_data = (void *)tm;
1572 tm->cm_targ = cm->cm_targ;
1573 tm->cm_lun = cm->cm_lun;
1575 if (!targ->is_nvme || sc->custom_nvme_tm_handling)
1576 timeout = MPR_ABORT_TIMEOUT;
1578 timeout = sc->nvme_abort_timeout;
1580 callout_reset(&tm->cm_callout, timeout * hz,
1581 mprsas_tm_timeout, tm);
1585 mprsas_prepare_for_tm(sc, tm, targ, tm->cm_lun);
1587 err = mpr_map_command(sc, tm);
1589 mpr_dprint(sc, MPR_ERROR|MPR_RECOVERY,
1590 "error %d sending abort for cm %p SMID %u\n",
1591 err, cm, req->TaskMID);
1596 mprsas_scsiio_timeout(void *data)
1598 sbintime_t elapsed, now;
1600 struct mpr_softc *sc;
1601 struct mpr_command *cm;
1602 struct mprsas_target *targ;
1604 cm = (struct mpr_command *)data;
1610 mtx_assert(&sc->mpr_mtx, MA_OWNED);
1612 mpr_dprint(sc, MPR_XINFO|MPR_RECOVERY, "Timeout checking cm %p\n", cm);
1615 * Run the interrupt handler to make sure it's not pending. This
1616 * isn't perfect because the command could have already completed
1617 * and been re-used, though this is unlikely.
1619 mpr_intr_locked(sc);
1620 if (cm->cm_flags & MPR_CM_FLAGS_ON_RECOVERY) {
1621 mprsas_log_command(cm, MPR_XINFO,
1622 "SCSI command %p almost timed out\n", cm);
1626 if (cm->cm_ccb == NULL) {
1627 mpr_dprint(sc, MPR_ERROR, "command timeout with NULL ccb\n");
1634 elapsed = now - ccb->ccb_h.qos.sim_data;
1635 mprsas_log_command(cm, MPR_INFO|MPR_RECOVERY,
1636 "Command timeout on target %u(0x%04x), %d set, %d.%d elapsed\n",
1637 targ->tid, targ->handle, ccb->ccb_h.timeout,
1638 sbintime_getsec(elapsed), elapsed & 0xffffffff);
1639 if (targ->encl_level_valid) {
1640 mpr_dprint(sc, MPR_INFO|MPR_RECOVERY,
1641 "At enclosure level %d, slot %d, connector name (%4s)\n",
1642 targ->encl_level, targ->encl_slot, targ->connector_name);
1645 /* XXX first, check the firmware state, to see if it's still
1646 * operational. if not, do a diag reset.
1648 mprsas_set_ccbstatus(cm->cm_ccb, CAM_CMD_TIMEOUT);
1649 cm->cm_flags |= MPR_CM_FLAGS_ON_RECOVERY | MPR_CM_FLAGS_TIMEDOUT;
1650 TAILQ_INSERT_TAIL(&targ->timedout_commands, cm, cm_recovery);
1652 if (targ->tm != NULL) {
1653 /* target already in recovery, just queue up another
1654 * timedout command to be processed later.
1656 mpr_dprint(sc, MPR_RECOVERY, "queued timedout cm %p for "
1657 "processing by tm %p\n", cm, targ->tm);
1659 else if ((targ->tm = mprsas_alloc_tm(sc)) != NULL) {
1660 /* start recovery by aborting the first timedout command */
1661 mpr_dprint(sc, MPR_RECOVERY|MPR_INFO,
1662 "Sending abort to target %u for SMID %d\n", targ->tid,
1663 cm->cm_desc.Default.SMID);
1664 mpr_dprint(sc, MPR_RECOVERY, "timedout cm %p allocated tm %p\n",
1666 mprsas_send_abort(sc, targ->tm, cm);
1669 /* XXX queue this target up for recovery once a TM becomes
1670 * available. The firmware only has a limited number of
1671 * HighPriority credits for the high priority requests used
1672 * for task management, and we ran out.
1674 * Isilon: don't worry about this for now, since we have
1675 * more credits than disks in an enclosure, and limit
1676 * ourselves to one TM per target for recovery.
1678 mpr_dprint(sc, MPR_ERROR|MPR_RECOVERY,
1679 "timedout cm %p failed to allocate a tm\n", cm);
1684 * mprsas_build_nvme_unmap - Build Native NVMe DSM command equivalent
1686 * Return 0 - for success,
1687 * 1 - to immediately return back the command with success status to CAM
1688 * negative value - to fallback to firmware path i.e. issue scsi unmap
1689 * to FW without any translation.
1692 mprsas_build_nvme_unmap(struct mpr_softc *sc, struct mpr_command *cm,
1693 union ccb *ccb, struct mprsas_target *targ)
1695 Mpi26NVMeEncapsulatedRequest_t *req = NULL;
1696 struct ccb_scsiio *csio;
1697 struct unmap_parm_list *plist;
1698 struct nvme_dsm_range *nvme_dsm_ranges = NULL;
1699 struct nvme_command *c;
1701 uint16_t ndesc, list_len, data_length;
1702 struct mpr_prp_page *prp_page_info;
1703 uint64_t nvme_dsm_ranges_dma_handle;
1706 list_len = (scsiio_cdb_ptr(csio)[7] << 8 | scsiio_cdb_ptr(csio)[8]);
1708 mpr_dprint(sc, MPR_ERROR, "Parameter list length is Zero\n");
1712 plist = malloc(csio->dxfer_len, M_MPR, M_ZERO|M_NOWAIT);
1714 mpr_dprint(sc, MPR_ERROR, "Unable to allocate memory to "
1715 "save UNMAP data\n");
1719 /* Copy SCSI unmap data to a local buffer */
1720 bcopy(csio->data_ptr, plist, csio->dxfer_len);
1722 /* return back the unmap command to CAM with success status,
1723 * if number of descripts is zero.
1725 ndesc = be16toh(plist->unmap_blk_desc_data_len) >> 4;
1727 mpr_dprint(sc, MPR_XINFO, "Number of descriptors in "
1728 "UNMAP cmd is Zero\n");
1733 data_length = ndesc * sizeof(struct nvme_dsm_range);
1734 if (data_length > targ->MDTS) {
1735 mpr_dprint(sc, MPR_ERROR, "data length: %d is greater than "
1736 "Device's MDTS: %d\n", data_length, targ->MDTS);
1741 prp_page_info = mpr_alloc_prp_page(sc);
1742 KASSERT(prp_page_info != NULL, ("%s: There is no PRP Page for "
1743 "UNMAP command.\n", __func__));
1746 * Insert the allocated PRP page into the command's PRP page list. This
1747 * will be freed when the command is freed.
1749 TAILQ_INSERT_TAIL(&cm->cm_prp_page_list, prp_page_info, prp_page_link);
1751 nvme_dsm_ranges = (struct nvme_dsm_range *)prp_page_info->prp_page;
1752 nvme_dsm_ranges_dma_handle = prp_page_info->prp_page_busaddr;
1754 bzero(nvme_dsm_ranges, data_length);
1756 /* Convert SCSI unmap's descriptor data to NVMe DSM specific Range data
1757 * for each descriptors contained in SCSI UNMAP data.
1759 for (i = 0; i < ndesc; i++) {
1760 nvme_dsm_ranges[i].length =
1761 htole32(be32toh(plist->desc[i].nlb));
1762 nvme_dsm_ranges[i].starting_lba =
1763 htole64(be64toh(plist->desc[i].slba));
1764 nvme_dsm_ranges[i].attributes = 0;
1767 /* Build MPI2.6's NVMe Encapsulated Request Message */
1768 req = (Mpi26NVMeEncapsulatedRequest_t *)cm->cm_req;
1769 bzero(req, sizeof(*req));
1770 req->DevHandle = htole16(targ->handle);
1771 req->Function = MPI2_FUNCTION_NVME_ENCAPSULATED;
1772 req->Flags = MPI26_NVME_FLAGS_WRITE;
1773 req->ErrorResponseBaseAddress.High =
1774 htole32((uint32_t)((uint64_t)cm->cm_sense_busaddr >> 32));
1775 req->ErrorResponseBaseAddress.Low =
1776 htole32(cm->cm_sense_busaddr);
1777 req->ErrorResponseAllocationLength =
1778 htole16(sizeof(struct nvme_completion));
1779 req->EncapsulatedCommandLength =
1780 htole16(sizeof(struct nvme_command));
1781 req->DataLength = htole32(data_length);
1783 /* Build NVMe DSM command */
1784 c = (struct nvme_command *) req->NVMe_Command;
1785 c->opc = NVME_OPC_DATASET_MANAGEMENT;
1786 c->nsid = htole32(csio->ccb_h.target_lun + 1);
1787 c->cdw10 = htole32(ndesc - 1);
1788 c->cdw11 = htole32(NVME_DSM_ATTR_DEALLOCATE);
1790 cm->cm_length = data_length;
1793 cm->cm_complete = mprsas_scsiio_complete;
1794 cm->cm_complete_data = ccb;
1796 cm->cm_lun = csio->ccb_h.target_lun;
1799 cm->cm_desc.Default.RequestFlags =
1800 MPI26_REQ_DESCRIPT_FLAGS_PCIE_ENCAPSULATED;
1802 csio->ccb_h.qos.sim_data = sbinuptime();
1803 callout_reset_sbt(&cm->cm_callout, SBT_1MS * ccb->ccb_h.timeout, 0,
1804 mprsas_scsiio_timeout, cm, 0);
1807 targ->outstanding++;
1808 TAILQ_INSERT_TAIL(&targ->commands, cm, cm_link);
1809 ccb->ccb_h.status |= CAM_SIM_QUEUED;
1811 mprsas_log_command(cm, MPR_XINFO, "%s cm %p ccb %p outstanding %u\n",
1812 __func__, cm, ccb, targ->outstanding);
1814 mpr_build_nvme_prp(sc, cm, req,
1815 (void *)(uintptr_t)nvme_dsm_ranges_dma_handle, 0, data_length);
1816 mpr_map_command(sc, cm);
1824 mprsas_action_scsiio(struct mprsas_softc *sassc, union ccb *ccb)
1826 MPI2_SCSI_IO_REQUEST *req;
1827 struct ccb_scsiio *csio;
1828 struct mpr_softc *sc;
1829 struct mprsas_target *targ;
1830 struct mprsas_lun *lun;
1831 struct mpr_command *cm;
1832 uint8_t i, lba_byte, *ref_tag_addr, scsi_opcode;
1833 uint16_t eedp_flags;
1834 uint32_t mpi_control;
1839 mtx_assert(&sc->mpr_mtx, MA_OWNED);
1842 KASSERT(csio->ccb_h.target_id < sassc->maxtargets,
1843 ("Target %d out of bounds in XPT_SCSI_IO\n",
1844 csio->ccb_h.target_id));
1845 targ = &sassc->targets[csio->ccb_h.target_id];
1846 mpr_dprint(sc, MPR_TRACE, "ccb %p target flag %x\n", ccb, targ->flags);
1847 if (targ->handle == 0x0) {
1848 mpr_dprint(sc, MPR_ERROR, "%s NULL handle for target %u\n",
1849 __func__, csio->ccb_h.target_id);
1850 mprsas_set_ccbstatus(ccb, CAM_DEV_NOT_THERE);
1854 if (targ->flags & MPR_TARGET_FLAGS_RAID_COMPONENT) {
1855 mpr_dprint(sc, MPR_ERROR, "%s Raid component no SCSI IO "
1856 "supported %u\n", __func__, csio->ccb_h.target_id);
1857 mprsas_set_ccbstatus(ccb, CAM_DEV_NOT_THERE);
1862 * Sometimes, it is possible to get a command that is not "In
1863 * Progress" and was actually aborted by the upper layer. Check for
1864 * this here and complete the command without error.
1866 if (mprsas_get_ccbstatus(ccb) != CAM_REQ_INPROG) {
1867 mpr_dprint(sc, MPR_TRACE, "%s Command is not in progress for "
1868 "target %u\n", __func__, csio->ccb_h.target_id);
1873 * If devinfo is 0 this will be a volume. In that case don't tell CAM
1874 * that the volume has timed out. We want volumes to be enumerated
1875 * until they are deleted/removed, not just failed. In either event,
1876 * we're removing the target due to a firmware event telling us
1877 * the device is now gone (as opposed to some transient event). Since
1878 * we're opting to remove failed devices from the OS's view, we need
1879 * to propagate that status up the stack.
1881 if (targ->flags & MPRSAS_TARGET_INREMOVAL) {
1882 if (targ->devinfo == 0)
1883 mprsas_set_ccbstatus(ccb, CAM_REQ_CMP);
1885 mprsas_set_ccbstatus(ccb, CAM_DEV_NOT_THERE);
1890 if ((sc->mpr_flags & MPR_FLAGS_SHUTDOWN) != 0) {
1891 mpr_dprint(sc, MPR_INFO, "%s shutting down\n", __func__);
1892 mprsas_set_ccbstatus(ccb, CAM_DEV_NOT_THERE);
1898 * If target has a reset in progress, freeze the devq and return. The
1899 * devq will be released when the TM reset is finished.
1901 if (targ->flags & MPRSAS_TARGET_INRESET) {
1902 ccb->ccb_h.status = CAM_BUSY | CAM_DEV_QFRZN;
1903 mpr_dprint(sc, MPR_INFO, "%s: Freezing devq for target ID %d\n",
1904 __func__, targ->tid);
1905 xpt_freeze_devq(ccb->ccb_h.path, 1);
1910 cm = mpr_alloc_command(sc);
1911 if (cm == NULL || (sc->mpr_flags & MPR_FLAGS_DIAGRESET)) {
1913 mpr_free_command(sc, cm);
1915 if ((sassc->flags & MPRSAS_QUEUE_FROZEN) == 0) {
1916 xpt_freeze_simq(sassc->sim, 1);
1917 sassc->flags |= MPRSAS_QUEUE_FROZEN;
1919 ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
1920 ccb->ccb_h.status |= CAM_REQUEUE_REQ;
1925 /* For NVME device's issue UNMAP command directly to NVME drives by
1926 * constructing equivalent native NVMe DataSetManagement command.
1928 scsi_opcode = scsiio_cdb_ptr(csio)[0];
1929 if (scsi_opcode == UNMAP &&
1931 (csio->ccb_h.flags & CAM_DATA_MASK) == CAM_DATA_VADDR) {
1932 rc = mprsas_build_nvme_unmap(sc, cm, ccb, targ);
1933 if (rc == 1) { /* return command to CAM with success status */
1934 mpr_free_command(sc, cm);
1935 mprsas_set_ccbstatus(ccb, CAM_REQ_CMP);
1938 } else if (!rc) /* Issued NVMe Encapsulated Request Message */
1942 req = (MPI2_SCSI_IO_REQUEST *)cm->cm_req;
1943 bzero(req, sizeof(*req));
1944 req->DevHandle = htole16(targ->handle);
1945 req->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
1947 req->SenseBufferLowAddress = htole32(cm->cm_sense_busaddr);
1948 req->SenseBufferLength = MPR_SENSE_LEN;
1950 req->ChainOffset = 0;
1951 req->SGLOffset0 = 24; /* 32bit word offset to the SGL */
1956 req->DataLength = htole32(csio->dxfer_len);
1957 req->BidirectionalDataLength = 0;
1958 req->IoFlags = htole16(csio->cdb_len);
1961 /* Note: BiDirectional transfers are not supported */
1962 switch (csio->ccb_h.flags & CAM_DIR_MASK) {
1964 mpi_control = MPI2_SCSIIO_CONTROL_READ;
1965 cm->cm_flags |= MPR_CM_FLAGS_DATAIN;
1968 mpi_control = MPI2_SCSIIO_CONTROL_WRITE;
1969 cm->cm_flags |= MPR_CM_FLAGS_DATAOUT;
1973 mpi_control = MPI2_SCSIIO_CONTROL_NODATATRANSFER;
1977 if (csio->cdb_len == 32)
1978 mpi_control |= 4 << MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT;
1980 * It looks like the hardware doesn't require an explicit tag
1981 * number for each transaction. SAM Task Management not supported
1984 switch (csio->tag_action) {
1985 case MSG_HEAD_OF_Q_TAG:
1986 mpi_control |= MPI2_SCSIIO_CONTROL_HEADOFQ;
1988 case MSG_ORDERED_Q_TAG:
1989 mpi_control |= MPI2_SCSIIO_CONTROL_ORDEREDQ;
1992 mpi_control |= MPI2_SCSIIO_CONTROL_ACAQ;
1994 case CAM_TAG_ACTION_NONE:
1995 case MSG_SIMPLE_Q_TAG:
1997 mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
2000 mpi_control |= (csio->priority << MPI2_SCSIIO_CONTROL_CMDPRI_SHIFT) &
2001 MPI2_SCSIIO_CONTROL_CMDPRI_MASK;
2002 mpi_control |= sc->mapping_table[csio->ccb_h.target_id].TLR_bits;
2003 req->Control = htole32(mpi_control);
2005 if (MPR_SET_LUN(req->LUN, csio->ccb_h.target_lun) != 0) {
2006 mpr_free_command(sc, cm);
2007 mprsas_set_ccbstatus(ccb, CAM_LUN_INVALID);
2012 if (csio->ccb_h.flags & CAM_CDB_POINTER)
2013 bcopy(csio->cdb_io.cdb_ptr, &req->CDB.CDB32[0], csio->cdb_len);
2015 KASSERT(csio->cdb_len <= IOCDBLEN,
2016 ("cdb_len %d is greater than IOCDBLEN but CAM_CDB_POINTER "
2017 "is not set", csio->cdb_len));
2018 bcopy(csio->cdb_io.cdb_bytes, &req->CDB.CDB32[0],csio->cdb_len);
2020 req->IoFlags = htole16(csio->cdb_len);
2023 * Check if EEDP is supported and enabled. If it is then check if the
2024 * SCSI opcode could be using EEDP. If so, make sure the LUN exists and
2025 * is formatted for EEDP support. If all of this is true, set CDB up
2026 * for EEDP transfer.
2028 eedp_flags = op_code_prot[req->CDB.CDB32[0]];
2029 if (sc->eedp_enabled && eedp_flags) {
2030 SLIST_FOREACH(lun, &targ->luns, lun_link) {
2031 if (lun->lun_id == csio->ccb_h.target_lun) {
2036 if ((lun != NULL) && (lun->eedp_formatted)) {
2037 req->EEDPBlockSize = htole32(lun->eedp_block_size);
2038 eedp_flags |= (MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG |
2039 MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG |
2040 MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD);
2041 if (sc->mpr_flags & MPR_FLAGS_GEN35_IOC) {
2043 MPI25_SCSIIO_EEDPFLAGS_APPTAG_DISABLE_MODE;
2045 req->EEDPFlags = htole16(eedp_flags);
2048 * If CDB less than 32, fill in Primary Ref Tag with
2049 * low 4 bytes of LBA. If CDB is 32, tag stuff is
2050 * already there. Also, set protection bit. FreeBSD
2051 * currently does not support CDBs bigger than 16, but
2052 * the code doesn't hurt, and will be here for the
2055 if (csio->cdb_len != 32) {
2056 lba_byte = (csio->cdb_len == 16) ? 6 : 2;
2057 ref_tag_addr = (uint8_t *)&req->CDB.EEDP32.
2058 PrimaryReferenceTag;
2059 for (i = 0; i < 4; i++) {
2061 req->CDB.CDB32[lba_byte + i];
2064 req->CDB.EEDP32.PrimaryReferenceTag =
2066 CDB.EEDP32.PrimaryReferenceTag);
2067 req->CDB.EEDP32.PrimaryApplicationTagMask =
2070 (req->CDB.CDB32[1] & 0x1F) | 0x20;
2073 MPI2_SCSIIO_EEDPFLAGS_INC_PRI_APPTAG;
2074 req->EEDPFlags = htole16(eedp_flags);
2075 req->CDB.CDB32[10] = (req->CDB.CDB32[10] &
2081 cm->cm_length = csio->dxfer_len;
2082 if (cm->cm_length != 0) {
2084 cm->cm_flags |= MPR_CM_FLAGS_USE_CCB;
2088 cm->cm_sge = &req->SGL;
2089 cm->cm_sglsize = (32 - 24) * 4;
2090 cm->cm_complete = mprsas_scsiio_complete;
2091 cm->cm_complete_data = ccb;
2093 cm->cm_lun = csio->ccb_h.target_lun;
2096 * If using FP desc type, need to set a bit in IoFlags (SCSI IO is 0)
2097 * and set descriptor type.
2099 if (targ->scsi_req_desc_type ==
2100 MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO) {
2101 req->IoFlags |= MPI25_SCSIIO_IOFLAGS_FAST_PATH;
2102 cm->cm_desc.FastPathSCSIIO.RequestFlags =
2103 MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO;
2104 if (!sc->atomic_desc_capable) {
2105 cm->cm_desc.FastPathSCSIIO.DevHandle =
2106 htole16(targ->handle);
2109 cm->cm_desc.SCSIIO.RequestFlags =
2110 MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO;
2111 if (!sc->atomic_desc_capable)
2112 cm->cm_desc.SCSIIO.DevHandle = htole16(targ->handle);
2115 csio->ccb_h.qos.sim_data = sbinuptime();
2116 callout_reset_sbt(&cm->cm_callout, SBT_1MS * ccb->ccb_h.timeout, 0,
2117 mprsas_scsiio_timeout, cm, 0);
2120 targ->outstanding++;
2121 TAILQ_INSERT_TAIL(&targ->commands, cm, cm_link);
2122 ccb->ccb_h.status |= CAM_SIM_QUEUED;
2124 mprsas_log_command(cm, MPR_XINFO, "%s cm %p ccb %p outstanding %u\n",
2125 __func__, cm, ccb, targ->outstanding);
2127 mpr_map_command(sc, cm);
2132 * mpr_sc_failed_io_info - translated non-succesfull SCSI_IO request
2135 mpr_sc_failed_io_info(struct mpr_softc *sc, struct ccb_scsiio *csio,
2136 Mpi2SCSIIOReply_t *mpi_reply, struct mprsas_target *targ)
2140 u16 ioc_status = le16toh(mpi_reply->IOCStatus) &
2141 MPI2_IOCSTATUS_MASK;
2142 u8 scsi_state = mpi_reply->SCSIState;
2143 u8 scsi_status = mpi_reply->SCSIStatus;
2144 char *desc_ioc_state = NULL;
2145 char *desc_scsi_status = NULL;
2146 u32 log_info = le32toh(mpi_reply->IOCLogInfo);
2148 if (log_info == 0x31170000)
2151 desc_ioc_state = mpr_describe_table(mpr_iocstatus_string,
2153 desc_scsi_status = mpr_describe_table(mpr_scsi_status_string,
2156 mpr_dprint(sc, MPR_XINFO, "\thandle(0x%04x), ioc_status(%s)(0x%04x)\n",
2157 le16toh(mpi_reply->DevHandle), desc_ioc_state, ioc_status);
2158 if (targ->encl_level_valid) {
2159 mpr_dprint(sc, MPR_XINFO, "At enclosure level %d, slot %d, "
2160 "connector name (%4s)\n", targ->encl_level, targ->encl_slot,
2161 targ->connector_name);
2165 * We can add more detail about underflow data here
2168 mpr_dprint(sc, MPR_XINFO, "\tscsi_status(%s)(0x%02x), "
2169 "scsi_state %b\n", desc_scsi_status, scsi_status,
2170 scsi_state, "\20" "\1AutosenseValid" "\2AutosenseFailed"
2171 "\3NoScsiStatus" "\4Terminated" "\5Response InfoValid");
2173 if (sc->mpr_debug & MPR_XINFO &&
2174 scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) {
2175 mpr_dprint(sc, MPR_XINFO, "-> Sense Buffer Data : Start :\n");
2176 scsi_sense_print(csio);
2177 mpr_dprint(sc, MPR_XINFO, "-> Sense Buffer Data : End :\n");
2180 if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) {
2181 response_info = le32toh(mpi_reply->ResponseInfo);
2182 response_bytes = (u8 *)&response_info;
2183 mpr_dprint(sc, MPR_XINFO, "response code(0x%01x): %s\n",
2185 mpr_describe_table(mpr_scsi_taskmgmt_string,
2186 response_bytes[0]));
2190 /** mprsas_nvme_trans_status_code
2192 * Convert Native NVMe command error status to
2193 * equivalent SCSI error status.
2195 * Returns appropriate scsi_status
2198 mprsas_nvme_trans_status_code(uint16_t nvme_status,
2199 struct mpr_command *cm)
2201 u8 status = MPI2_SCSI_STATUS_GOOD;
2202 int skey, asc, ascq;
2203 union ccb *ccb = cm->cm_complete_data;
2204 int returned_sense_len;
2207 sct = NVME_STATUS_GET_SCT(nvme_status);
2208 sc = NVME_STATUS_GET_SC(nvme_status);
2210 status = MPI2_SCSI_STATUS_CHECK_CONDITION;
2211 skey = SSD_KEY_ILLEGAL_REQUEST;
2212 asc = SCSI_ASC_NO_SENSE;
2213 ascq = SCSI_ASCQ_CAUSE_NOT_REPORTABLE;
2216 case NVME_SCT_GENERIC:
2218 case NVME_SC_SUCCESS:
2219 status = MPI2_SCSI_STATUS_GOOD;
2220 skey = SSD_KEY_NO_SENSE;
2221 asc = SCSI_ASC_NO_SENSE;
2222 ascq = SCSI_ASCQ_CAUSE_NOT_REPORTABLE;
2224 case NVME_SC_INVALID_OPCODE:
2225 status = MPI2_SCSI_STATUS_CHECK_CONDITION;
2226 skey = SSD_KEY_ILLEGAL_REQUEST;
2227 asc = SCSI_ASC_ILLEGAL_COMMAND;
2228 ascq = SCSI_ASCQ_CAUSE_NOT_REPORTABLE;
2230 case NVME_SC_INVALID_FIELD:
2231 status = MPI2_SCSI_STATUS_CHECK_CONDITION;
2232 skey = SSD_KEY_ILLEGAL_REQUEST;
2233 asc = SCSI_ASC_INVALID_CDB;
2234 ascq = SCSI_ASCQ_CAUSE_NOT_REPORTABLE;
2236 case NVME_SC_DATA_TRANSFER_ERROR:
2237 status = MPI2_SCSI_STATUS_CHECK_CONDITION;
2238 skey = SSD_KEY_MEDIUM_ERROR;
2239 asc = SCSI_ASC_NO_SENSE;
2240 ascq = SCSI_ASCQ_CAUSE_NOT_REPORTABLE;
2242 case NVME_SC_ABORTED_POWER_LOSS:
2243 status = MPI2_SCSI_STATUS_TASK_ABORTED;
2244 skey = SSD_KEY_ABORTED_COMMAND;
2245 asc = SCSI_ASC_WARNING;
2246 ascq = SCSI_ASCQ_POWER_LOSS_EXPECTED;
2248 case NVME_SC_INTERNAL_DEVICE_ERROR:
2249 status = MPI2_SCSI_STATUS_CHECK_CONDITION;
2250 skey = SSD_KEY_HARDWARE_ERROR;
2251 asc = SCSI_ASC_INTERNAL_TARGET_FAILURE;
2252 ascq = SCSI_ASCQ_CAUSE_NOT_REPORTABLE;
2254 case NVME_SC_ABORTED_BY_REQUEST:
2255 case NVME_SC_ABORTED_SQ_DELETION:
2256 case NVME_SC_ABORTED_FAILED_FUSED:
2257 case NVME_SC_ABORTED_MISSING_FUSED:
2258 status = MPI2_SCSI_STATUS_TASK_ABORTED;
2259 skey = SSD_KEY_ABORTED_COMMAND;
2260 asc = SCSI_ASC_NO_SENSE;
2261 ascq = SCSI_ASCQ_CAUSE_NOT_REPORTABLE;
2263 case NVME_SC_INVALID_NAMESPACE_OR_FORMAT:
2264 status = MPI2_SCSI_STATUS_CHECK_CONDITION;
2265 skey = SSD_KEY_ILLEGAL_REQUEST;
2266 asc = SCSI_ASC_ACCESS_DENIED_INVALID_LUN_ID;
2267 ascq = SCSI_ASCQ_INVALID_LUN_ID;
2269 case NVME_SC_LBA_OUT_OF_RANGE:
2270 status = MPI2_SCSI_STATUS_CHECK_CONDITION;
2271 skey = SSD_KEY_ILLEGAL_REQUEST;
2272 asc = SCSI_ASC_ILLEGAL_BLOCK;
2273 ascq = SCSI_ASCQ_CAUSE_NOT_REPORTABLE;
2275 case NVME_SC_CAPACITY_EXCEEDED:
2276 status = MPI2_SCSI_STATUS_CHECK_CONDITION;
2277 skey = SSD_KEY_MEDIUM_ERROR;
2278 asc = SCSI_ASC_NO_SENSE;
2279 ascq = SCSI_ASCQ_CAUSE_NOT_REPORTABLE;
2281 case NVME_SC_NAMESPACE_NOT_READY:
2282 status = MPI2_SCSI_STATUS_CHECK_CONDITION;
2283 skey = SSD_KEY_NOT_READY;
2284 asc = SCSI_ASC_LUN_NOT_READY;
2285 ascq = SCSI_ASCQ_CAUSE_NOT_REPORTABLE;
2289 case NVME_SCT_COMMAND_SPECIFIC:
2291 case NVME_SC_INVALID_FORMAT:
2292 status = MPI2_SCSI_STATUS_CHECK_CONDITION;
2293 skey = SSD_KEY_ILLEGAL_REQUEST;
2294 asc = SCSI_ASC_FORMAT_COMMAND_FAILED;
2295 ascq = SCSI_ASCQ_FORMAT_COMMAND_FAILED;
2297 case NVME_SC_CONFLICTING_ATTRIBUTES:
2298 status = MPI2_SCSI_STATUS_CHECK_CONDITION;
2299 skey = SSD_KEY_ILLEGAL_REQUEST;
2300 asc = SCSI_ASC_INVALID_CDB;
2301 ascq = SCSI_ASCQ_CAUSE_NOT_REPORTABLE;
2305 case NVME_SCT_MEDIA_ERROR:
2307 case NVME_SC_WRITE_FAULTS:
2308 status = MPI2_SCSI_STATUS_CHECK_CONDITION;
2309 skey = SSD_KEY_MEDIUM_ERROR;
2310 asc = SCSI_ASC_PERIPHERAL_DEV_WRITE_FAULT;
2311 ascq = SCSI_ASCQ_CAUSE_NOT_REPORTABLE;
2313 case NVME_SC_UNRECOVERED_READ_ERROR:
2314 status = MPI2_SCSI_STATUS_CHECK_CONDITION;
2315 skey = SSD_KEY_MEDIUM_ERROR;
2316 asc = SCSI_ASC_UNRECOVERED_READ_ERROR;
2317 ascq = SCSI_ASCQ_CAUSE_NOT_REPORTABLE;
2319 case NVME_SC_GUARD_CHECK_ERROR:
2320 status = MPI2_SCSI_STATUS_CHECK_CONDITION;
2321 skey = SSD_KEY_MEDIUM_ERROR;
2322 asc = SCSI_ASC_LOG_BLOCK_GUARD_CHECK_FAILED;
2323 ascq = SCSI_ASCQ_LOG_BLOCK_GUARD_CHECK_FAILED;
2325 case NVME_SC_APPLICATION_TAG_CHECK_ERROR:
2326 status = MPI2_SCSI_STATUS_CHECK_CONDITION;
2327 skey = SSD_KEY_MEDIUM_ERROR;
2328 asc = SCSI_ASC_LOG_BLOCK_APPTAG_CHECK_FAILED;
2329 ascq = SCSI_ASCQ_LOG_BLOCK_APPTAG_CHECK_FAILED;
2331 case NVME_SC_REFERENCE_TAG_CHECK_ERROR:
2332 status = MPI2_SCSI_STATUS_CHECK_CONDITION;
2333 skey = SSD_KEY_MEDIUM_ERROR;
2334 asc = SCSI_ASC_LOG_BLOCK_REFTAG_CHECK_FAILED;
2335 ascq = SCSI_ASCQ_LOG_BLOCK_REFTAG_CHECK_FAILED;
2337 case NVME_SC_COMPARE_FAILURE:
2338 status = MPI2_SCSI_STATUS_CHECK_CONDITION;
2339 skey = SSD_KEY_MISCOMPARE;
2340 asc = SCSI_ASC_MISCOMPARE_DURING_VERIFY;
2341 ascq = SCSI_ASCQ_CAUSE_NOT_REPORTABLE;
2343 case NVME_SC_ACCESS_DENIED:
2344 status = MPI2_SCSI_STATUS_CHECK_CONDITION;
2345 skey = SSD_KEY_ILLEGAL_REQUEST;
2346 asc = SCSI_ASC_ACCESS_DENIED_INVALID_LUN_ID;
2347 ascq = SCSI_ASCQ_INVALID_LUN_ID;
2353 returned_sense_len = sizeof(struct scsi_sense_data);
2354 if (returned_sense_len < ccb->csio.sense_len)
2355 ccb->csio.sense_resid = ccb->csio.sense_len -
2358 ccb->csio.sense_resid = 0;
2360 scsi_set_sense_data(&ccb->csio.sense_data, SSD_TYPE_FIXED,
2361 1, skey, asc, ascq, SSD_ELEM_NONE);
2362 ccb->ccb_h.status |= CAM_AUTOSNS_VALID;
2367 /** mprsas_complete_nvme_unmap
2369 * Complete native NVMe command issued using NVMe Encapsulated
2373 mprsas_complete_nvme_unmap(struct mpr_softc *sc, struct mpr_command *cm)
2375 Mpi26NVMeEncapsulatedErrorReply_t *mpi_reply;
2376 struct nvme_completion *nvme_completion = NULL;
2377 u8 scsi_status = MPI2_SCSI_STATUS_GOOD;
2379 mpi_reply =(Mpi26NVMeEncapsulatedErrorReply_t *)cm->cm_reply;
2380 if (le16toh(mpi_reply->ErrorResponseCount)){
2381 nvme_completion = (struct nvme_completion *)cm->cm_sense;
2382 scsi_status = mprsas_nvme_trans_status_code(
2383 nvme_completion->status, cm);
2389 mprsas_scsiio_complete(struct mpr_softc *sc, struct mpr_command *cm)
2391 MPI2_SCSI_IO_REPLY *rep;
2393 struct ccb_scsiio *csio;
2394 struct mprsas_softc *sassc;
2395 struct scsi_vpd_supported_page_list *vpd_list = NULL;
2396 u8 *TLR_bits, TLR_on, *scsi_cdb;
2399 struct mprsas_target *target;
2400 target_id_t target_id;
2404 callout_stop(&cm->cm_callout);
2405 mtx_assert(&sc->mpr_mtx, MA_OWNED);
2408 ccb = cm->cm_complete_data;
2410 target_id = csio->ccb_h.target_id;
2411 rep = (MPI2_SCSI_IO_REPLY *)cm->cm_reply;
2412 mpr_dprint(sc, MPR_TRACE,
2413 "cm %p SMID %u ccb %p reply %p outstanding %u csio->scsi_status 0x%x,"
2414 "csio->dxfer_len 0x%x, csio->msg_le 0x%xn\n", cm,
2415 cm->cm_desc.Default.SMID, cm->cm_ccb, cm->cm_reply,
2416 cm->cm_targ->outstanding, csio->scsi_status,
2417 csio->dxfer_len, csio->msg_len);
2419 * XXX KDM if the chain allocation fails, does it matter if we do
2420 * the sync and unload here? It is simpler to do it in every case,
2421 * assuming it doesn't cause problems.
2423 if (cm->cm_data != NULL) {
2424 if (cm->cm_flags & MPR_CM_FLAGS_DATAIN)
2425 dir = BUS_DMASYNC_POSTREAD;
2426 else if (cm->cm_flags & MPR_CM_FLAGS_DATAOUT)
2427 dir = BUS_DMASYNC_POSTWRITE;
2428 bus_dmamap_sync(sc->buffer_dmat, cm->cm_dmamap, dir);
2429 bus_dmamap_unload(sc->buffer_dmat, cm->cm_dmamap);
2432 cm->cm_targ->completed++;
2433 cm->cm_targ->outstanding--;
2434 TAILQ_REMOVE(&cm->cm_targ->commands, cm, cm_link);
2435 ccb->ccb_h.status &= ~(CAM_STATUS_MASK | CAM_SIM_QUEUED);
2437 if (cm->cm_flags & MPR_CM_FLAGS_ON_RECOVERY) {
2438 TAILQ_REMOVE(&cm->cm_targ->timedout_commands, cm, cm_recovery);
2439 KASSERT(cm->cm_state == MPR_CM_STATE_BUSY,
2440 ("Not busy for CM_FLAGS_TIMEDOUT: %u\n", cm->cm_state));
2441 cm->cm_flags &= ~MPR_CM_FLAGS_ON_RECOVERY;
2442 if (cm->cm_reply != NULL)
2443 mprsas_log_command(cm, MPR_RECOVERY,
2444 "completed timedout cm %p ccb %p during recovery "
2445 "ioc %x scsi %x state %x xfer %u\n", cm, cm->cm_ccb,
2446 le16toh(rep->IOCStatus), rep->SCSIStatus,
2447 rep->SCSIState, le32toh(rep->TransferCount));
2449 mprsas_log_command(cm, MPR_RECOVERY,
2450 "completed timedout cm %p ccb %p during recovery\n",
2452 } else if (cm->cm_targ->tm != NULL) {
2453 if (cm->cm_reply != NULL)
2454 mprsas_log_command(cm, MPR_RECOVERY,
2455 "completed cm %p ccb %p during recovery "
2456 "ioc %x scsi %x state %x xfer %u\n",
2457 cm, cm->cm_ccb, le16toh(rep->IOCStatus),
2458 rep->SCSIStatus, rep->SCSIState,
2459 le32toh(rep->TransferCount));
2461 mprsas_log_command(cm, MPR_RECOVERY,
2462 "completed cm %p ccb %p during recovery\n",
2464 } else if ((sc->mpr_flags & MPR_FLAGS_DIAGRESET) != 0) {
2465 mprsas_log_command(cm, MPR_RECOVERY,
2466 "reset completed cm %p ccb %p\n", cm, cm->cm_ccb);
2469 if ((cm->cm_flags & MPR_CM_FLAGS_ERROR_MASK) != 0) {
2471 * We ran into an error after we tried to map the command,
2472 * so we're getting a callback without queueing the command
2473 * to the hardware. So we set the status here, and it will
2474 * be retained below. We'll go through the "fast path",
2475 * because there can be no reply when we haven't actually
2476 * gone out to the hardware.
2478 mprsas_set_ccbstatus(ccb, CAM_REQUEUE_REQ);
2481 * Currently the only error included in the mask is
2482 * MPR_CM_FLAGS_CHAIN_FAILED, which means we're out of
2483 * chain frames. We need to freeze the queue until we get
2484 * a command that completed without this error, which will
2485 * hopefully have some chain frames attached that we can
2486 * use. If we wanted to get smarter about it, we would
2487 * only unfreeze the queue in this condition when we're
2488 * sure that we're getting some chain frames back. That's
2489 * probably unnecessary.
2491 if ((sassc->flags & MPRSAS_QUEUE_FROZEN) == 0) {
2492 xpt_freeze_simq(sassc->sim, 1);
2493 sassc->flags |= MPRSAS_QUEUE_FROZEN;
2494 mpr_dprint(sc, MPR_XINFO, "Error sending command, "
2495 "freezing SIM queue\n");
2500 * Point to the SCSI CDB, which is dependent on the CAM_CDB_POINTER
2501 * flag, and use it in a few places in the rest of this function for
2502 * convenience. Use the macro if available.
2504 scsi_cdb = scsiio_cdb_ptr(csio);
2507 * If this is a Start Stop Unit command and it was issued by the driver
2508 * during shutdown, decrement the refcount to account for all of the
2509 * commands that were sent. All SSU commands should be completed before
2510 * shutdown completes, meaning SSU_refcount will be 0 after SSU_started
2513 if (sc->SSU_started && (scsi_cdb[0] == START_STOP_UNIT)) {
2514 mpr_dprint(sc, MPR_INFO, "Decrementing SSU count.\n");
2518 /* Take the fast path to completion */
2519 if (cm->cm_reply == NULL) {
2520 if (mprsas_get_ccbstatus(ccb) == CAM_REQ_INPROG) {
2521 if ((sc->mpr_flags & MPR_FLAGS_DIAGRESET) != 0)
2522 mprsas_set_ccbstatus(ccb, CAM_SCSI_BUS_RESET);
2524 mprsas_set_ccbstatus(ccb, CAM_REQ_CMP);
2525 csio->scsi_status = SCSI_STATUS_OK;
2527 if (sassc->flags & MPRSAS_QUEUE_FROZEN) {
2528 ccb->ccb_h.status |= CAM_RELEASE_SIMQ;
2529 sassc->flags &= ~MPRSAS_QUEUE_FROZEN;
2530 mpr_dprint(sc, MPR_XINFO,
2531 "Unfreezing SIM queue\n");
2536 * There are two scenarios where the status won't be
2537 * CAM_REQ_CMP. The first is if MPR_CM_FLAGS_ERROR_MASK is
2538 * set, the second is in the MPR_FLAGS_DIAGRESET above.
2540 if (mprsas_get_ccbstatus(ccb) != CAM_REQ_CMP) {
2542 * Freeze the dev queue so that commands are
2543 * executed in the correct order after error
2546 ccb->ccb_h.status |= CAM_DEV_QFRZN;
2547 xpt_freeze_devq(ccb->ccb_h.path, /*count*/ 1);
2549 mpr_free_command(sc, cm);
2554 target = &sassc->targets[target_id];
2555 if (scsi_cdb[0] == UNMAP &&
2557 (csio->ccb_h.flags & CAM_DATA_MASK) == CAM_DATA_VADDR) {
2558 rep->SCSIStatus = mprsas_complete_nvme_unmap(sc, cm);
2559 csio->scsi_status = rep->SCSIStatus;
2562 mprsas_log_command(cm, MPR_XINFO,
2563 "ioc %x scsi %x state %x xfer %u\n",
2564 le16toh(rep->IOCStatus), rep->SCSIStatus, rep->SCSIState,
2565 le32toh(rep->TransferCount));
2567 switch (le16toh(rep->IOCStatus) & MPI2_IOCSTATUS_MASK) {
2568 case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN:
2569 csio->resid = cm->cm_length - le32toh(rep->TransferCount);
2571 case MPI2_IOCSTATUS_SUCCESS:
2572 case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
2573 if ((le16toh(rep->IOCStatus) & MPI2_IOCSTATUS_MASK) ==
2574 MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR)
2575 mprsas_log_command(cm, MPR_XINFO, "recovered error\n");
2577 /* Completion failed at the transport level. */
2578 if (rep->SCSIState & (MPI2_SCSI_STATE_NO_SCSI_STATUS |
2579 MPI2_SCSI_STATE_TERMINATED)) {
2580 mprsas_set_ccbstatus(ccb, CAM_REQ_CMP_ERR);
2584 /* In a modern packetized environment, an autosense failure
2585 * implies that there's not much else that can be done to
2586 * recover the command.
2588 if (rep->SCSIState & MPI2_SCSI_STATE_AUTOSENSE_FAILED) {
2589 mprsas_set_ccbstatus(ccb, CAM_AUTOSENSE_FAIL);
2594 * CAM doesn't care about SAS Response Info data, but if this is
2595 * the state check if TLR should be done. If not, clear the
2596 * TLR_bits for the target.
2598 if ((rep->SCSIState & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) &&
2599 ((le32toh(rep->ResponseInfo) & MPI2_SCSI_RI_MASK_REASONCODE)
2600 == MPR_SCSI_RI_INVALID_FRAME)) {
2601 sc->mapping_table[target_id].TLR_bits =
2602 (u8)MPI2_SCSIIO_CONTROL_NO_TLR;
2606 * Intentionally override the normal SCSI status reporting
2607 * for these two cases. These are likely to happen in a
2608 * multi-initiator environment, and we want to make sure that
2609 * CAM retries these commands rather than fail them.
2611 if ((rep->SCSIStatus == MPI2_SCSI_STATUS_COMMAND_TERMINATED) ||
2612 (rep->SCSIStatus == MPI2_SCSI_STATUS_TASK_ABORTED)) {
2613 mprsas_set_ccbstatus(ccb, CAM_REQ_ABORTED);
2617 /* Handle normal status and sense */
2618 csio->scsi_status = rep->SCSIStatus;
2619 if (rep->SCSIStatus == MPI2_SCSI_STATUS_GOOD)
2620 mprsas_set_ccbstatus(ccb, CAM_REQ_CMP);
2622 mprsas_set_ccbstatus(ccb, CAM_SCSI_STATUS_ERROR);
2624 if (rep->SCSIState & MPI2_SCSI_STATE_AUTOSENSE_VALID) {
2625 int sense_len, returned_sense_len;
2627 returned_sense_len = min(le32toh(rep->SenseCount),
2628 sizeof(struct scsi_sense_data));
2629 if (returned_sense_len < csio->sense_len)
2630 csio->sense_resid = csio->sense_len -
2633 csio->sense_resid = 0;
2635 sense_len = min(returned_sense_len,
2636 csio->sense_len - csio->sense_resid);
2637 bzero(&csio->sense_data, sizeof(csio->sense_data));
2638 bcopy(cm->cm_sense, &csio->sense_data, sense_len);
2639 ccb->ccb_h.status |= CAM_AUTOSNS_VALID;
2643 * Check if this is an INQUIRY command. If it's a VPD inquiry,
2644 * and it's page code 0 (Supported Page List), and there is
2645 * inquiry data, and this is for a sequential access device, and
2646 * the device is an SSP target, and TLR is supported by the
2647 * controller, turn the TLR_bits value ON if page 0x90 is
2650 if ((scsi_cdb[0] == INQUIRY) &&
2651 (scsi_cdb[1] & SI_EVPD) &&
2652 (scsi_cdb[2] == SVPD_SUPPORTED_PAGE_LIST) &&
2653 ((csio->ccb_h.flags & CAM_DATA_MASK) == CAM_DATA_VADDR) &&
2654 (csio->data_ptr != NULL) &&
2655 ((csio->data_ptr[0] & 0x1f) == T_SEQUENTIAL) &&
2656 (sc->control_TLR) &&
2657 (sc->mapping_table[target_id].device_info &
2658 MPI2_SAS_DEVICE_INFO_SSP_TARGET)) {
2659 vpd_list = (struct scsi_vpd_supported_page_list *)
2661 TLR_bits = &sc->mapping_table[target_id].TLR_bits;
2662 *TLR_bits = (u8)MPI2_SCSIIO_CONTROL_NO_TLR;
2663 TLR_on = (u8)MPI2_SCSIIO_CONTROL_TLR_ON;
2664 alloc_len = ((u16)scsi_cdb[3] << 8) + scsi_cdb[4];
2665 alloc_len -= csio->resid;
2666 for (i = 0; i < MIN(vpd_list->length, alloc_len); i++) {
2667 if (vpd_list->list[i] == 0x90) {
2675 * If this is a SATA direct-access end device, mark it so that
2676 * a SCSI StartStopUnit command will be sent to it when the
2677 * driver is being shutdown.
2679 if ((scsi_cdb[0] == INQUIRY) &&
2680 (csio->data_ptr != NULL) &&
2681 ((csio->data_ptr[0] & 0x1f) == T_DIRECT) &&
2682 (sc->mapping_table[target_id].device_info &
2683 MPI2_SAS_DEVICE_INFO_SATA_DEVICE) &&
2684 ((sc->mapping_table[target_id].device_info &
2685 MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE) ==
2686 MPI2_SAS_DEVICE_INFO_END_DEVICE)) {
2687 target = &sassc->targets[target_id];
2688 target->supports_SSU = TRUE;
2689 mpr_dprint(sc, MPR_XINFO, "Target %d supports SSU\n",
2693 case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE:
2694 case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
2696 * If devinfo is 0 this will be a volume. In that case don't
2697 * tell CAM that the volume is not there. We want volumes to
2698 * be enumerated until they are deleted/removed, not just
2701 if (cm->cm_targ->devinfo == 0)
2702 mprsas_set_ccbstatus(ccb, CAM_REQ_CMP);
2704 mprsas_set_ccbstatus(ccb, CAM_DEV_NOT_THERE);
2706 case MPI2_IOCSTATUS_INVALID_SGL:
2707 mpr_print_scsiio_cmd(sc, cm);
2708 mprsas_set_ccbstatus(ccb, CAM_UNREC_HBA_ERROR);
2710 case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
2712 * This is one of the responses that comes back when an I/O
2713 * has been aborted. If it is because of a timeout that we
2714 * initiated, just set the status to CAM_CMD_TIMEOUT.
2715 * Otherwise set it to CAM_REQ_ABORTED. The effect on the
2716 * command is the same (it gets retried, subject to the
2717 * retry counter), the only difference is what gets printed
2720 if (cm->cm_flags & MPR_CM_FLAGS_TIMEDOUT)
2721 mprsas_set_ccbstatus(ccb, CAM_CMD_TIMEOUT);
2723 mprsas_set_ccbstatus(ccb, CAM_REQ_ABORTED);
2725 case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN:
2726 /* resid is ignored for this condition */
2728 mprsas_set_ccbstatus(ccb, CAM_DATA_RUN_ERR);
2730 case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
2731 case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
2733 * These can sometimes be transient transport-related
2734 * errors, and sometimes persistent drive-related errors.
2735 * We used to retry these without decrementing the retry
2736 * count by returning CAM_REQUEUE_REQ. Unfortunately, if
2737 * we hit a persistent drive problem that returns one of
2738 * these error codes, we would retry indefinitely. So,
2739 * return CAM_REQ_CMP_ERROR so that we decrement the retry
2740 * count and avoid infinite retries. We're taking the
2741 * potential risk of flagging false failures in the event
2742 * of a topology-related error (e.g. a SAS expander problem
2743 * causes a command addressed to a drive to fail), but
2744 * avoiding getting into an infinite retry loop. However,
2745 * if we get them while were moving a device, we should
2746 * fail the request as 'not there' because the device
2747 * is effectively gone.
2749 if (cm->cm_targ->flags & MPRSAS_TARGET_INREMOVAL)
2750 mprsas_set_ccbstatus(ccb, CAM_DEV_NOT_THERE);
2752 mprsas_set_ccbstatus(ccb, CAM_REQ_CMP_ERR);
2753 mpr_dprint(sc, MPR_INFO,
2754 "Controller reported %s tgt %u SMID %u loginfo %x%s\n",
2755 mpr_describe_table(mpr_iocstatus_string,
2756 le16toh(rep->IOCStatus) & MPI2_IOCSTATUS_MASK),
2757 target_id, cm->cm_desc.Default.SMID,
2758 le32toh(rep->IOCLogInfo),
2759 (cm->cm_targ->flags & MPRSAS_TARGET_INREMOVAL) ? " departing" : "");
2760 mpr_dprint(sc, MPR_XINFO,
2761 "SCSIStatus %x SCSIState %x xfercount %u\n",
2762 rep->SCSIStatus, rep->SCSIState,
2763 le32toh(rep->TransferCount));
2765 case MPI2_IOCSTATUS_INVALID_FUNCTION:
2766 case MPI2_IOCSTATUS_INTERNAL_ERROR:
2767 case MPI2_IOCSTATUS_INVALID_VPID:
2768 case MPI2_IOCSTATUS_INVALID_FIELD:
2769 case MPI2_IOCSTATUS_INVALID_STATE:
2770 case MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED:
2771 case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR:
2772 case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
2773 case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
2774 case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
2776 mprsas_log_command(cm, MPR_XINFO,
2777 "completed ioc %x loginfo %x scsi %x state %x xfer %u\n",
2778 le16toh(rep->IOCStatus), le32toh(rep->IOCLogInfo),
2779 rep->SCSIStatus, rep->SCSIState,
2780 le32toh(rep->TransferCount));
2781 csio->resid = cm->cm_length;
2783 if (scsi_cdb[0] == UNMAP &&
2785 (csio->ccb_h.flags & CAM_DATA_MASK) == CAM_DATA_VADDR)
2786 mprsas_set_ccbstatus(ccb, CAM_REQ_CMP);
2788 mprsas_set_ccbstatus(ccb, CAM_REQ_CMP_ERR);
2793 mpr_sc_failed_io_info(sc, csio, rep, cm->cm_targ);
2795 if (sassc->flags & MPRSAS_QUEUE_FROZEN) {
2796 ccb->ccb_h.status |= CAM_RELEASE_SIMQ;
2797 sassc->flags &= ~MPRSAS_QUEUE_FROZEN;
2798 mpr_dprint(sc, MPR_XINFO, "Command completed, unfreezing SIM "
2802 if (mprsas_get_ccbstatus(ccb) != CAM_REQ_CMP) {
2803 ccb->ccb_h.status |= CAM_DEV_QFRZN;
2804 xpt_freeze_devq(ccb->ccb_h.path, /*count*/ 1);
2808 * Check to see if we're removing the device. If so, and this is the
2809 * last command on the queue, proceed with the deferred removal of the
2810 * device. Note, for removing a volume, this won't trigger because
2811 * pending_remove_tm will be NULL.
2813 if (cm->cm_targ->flags & MPRSAS_TARGET_INREMOVAL) {
2814 if (TAILQ_FIRST(&cm->cm_targ->commands) == NULL &&
2815 cm->cm_targ->pending_remove_tm != NULL) {
2816 mpr_dprint(sc, MPR_INFO, "Last pending command complete: starting remove_device\n");
2817 mpr_map_command(sc, cm->cm_targ->pending_remove_tm);
2818 cm->cm_targ->pending_remove_tm = NULL;
2822 mpr_free_command(sc, cm);
2827 mprsas_smpio_complete(struct mpr_softc *sc, struct mpr_command *cm)
2829 MPI2_SMP_PASSTHROUGH_REPLY *rpl;
2830 MPI2_SMP_PASSTHROUGH_REQUEST *req;
2834 ccb = cm->cm_complete_data;
2837 * Currently there should be no way we can hit this case. It only
2838 * happens when we have a failure to allocate chain frames, and SMP
2839 * commands require two S/G elements only. That should be handled
2840 * in the standard request size.
2842 if ((cm->cm_flags & MPR_CM_FLAGS_ERROR_MASK) != 0) {
2843 mpr_dprint(sc, MPR_ERROR, "%s: cm_flags = %#x on SMP "
2844 "request!\n", __func__, cm->cm_flags);
2845 mprsas_set_ccbstatus(ccb, CAM_REQ_CMP_ERR);
2849 rpl = (MPI2_SMP_PASSTHROUGH_REPLY *)cm->cm_reply;
2851 mpr_dprint(sc, MPR_ERROR, "%s: NULL cm_reply!\n", __func__);
2852 mprsas_set_ccbstatus(ccb, CAM_REQ_CMP_ERR);
2856 req = (MPI2_SMP_PASSTHROUGH_REQUEST *)cm->cm_req;
2857 sasaddr = le32toh(req->SASAddress.Low);
2858 sasaddr |= ((uint64_t)(le32toh(req->SASAddress.High))) << 32;
2860 if ((le16toh(rpl->IOCStatus) & MPI2_IOCSTATUS_MASK) !=
2861 MPI2_IOCSTATUS_SUCCESS ||
2862 rpl->SASStatus != MPI2_SASSTATUS_SUCCESS) {
2863 mpr_dprint(sc, MPR_XINFO, "%s: IOCStatus %04x SASStatus %02x\n",
2864 __func__, le16toh(rpl->IOCStatus), rpl->SASStatus);
2865 mprsas_set_ccbstatus(ccb, CAM_REQ_CMP_ERR);
2869 mpr_dprint(sc, MPR_XINFO, "%s: SMP request to SAS address %#jx "
2870 "completed successfully\n", __func__, (uintmax_t)sasaddr);
2872 if (ccb->smpio.smp_response[2] == SMP_FR_ACCEPTED)
2873 mprsas_set_ccbstatus(ccb, CAM_REQ_CMP);
2875 mprsas_set_ccbstatus(ccb, CAM_SMP_STATUS_ERROR);
2879 * We sync in both directions because we had DMAs in the S/G list
2880 * in both directions.
2882 bus_dmamap_sync(sc->buffer_dmat, cm->cm_dmamap,
2883 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
2884 bus_dmamap_unload(sc->buffer_dmat, cm->cm_dmamap);
2885 mpr_free_command(sc, cm);
2890 mprsas_send_smpcmd(struct mprsas_softc *sassc, union ccb *ccb, uint64_t sasaddr)
2892 struct mpr_command *cm;
2893 uint8_t *request, *response;
2894 MPI2_SMP_PASSTHROUGH_REQUEST *req;
2895 struct mpr_softc *sc;
2903 switch (ccb->ccb_h.flags & CAM_DATA_MASK) {
2904 case CAM_DATA_PADDR:
2905 case CAM_DATA_SG_PADDR:
2907 * XXX We don't yet support physical addresses here.
2909 mpr_dprint(sc, MPR_ERROR, "%s: physical addresses not "
2910 "supported\n", __func__);
2911 mprsas_set_ccbstatus(ccb, CAM_REQ_INVALID);
2916 * The chip does not support more than one buffer for the
2917 * request or response.
2919 if ((ccb->smpio.smp_request_sglist_cnt > 1)
2920 || (ccb->smpio.smp_response_sglist_cnt > 1)) {
2921 mpr_dprint(sc, MPR_ERROR, "%s: multiple request or "
2922 "response buffer segments not supported for SMP\n",
2924 mprsas_set_ccbstatus(ccb, CAM_REQ_INVALID);
2930 * The CAM_SCATTER_VALID flag was originally implemented
2931 * for the XPT_SCSI_IO CCB, which only has one data pointer.
2932 * We have two. So, just take that flag to mean that we
2933 * might have S/G lists, and look at the S/G segment count
2934 * to figure out whether that is the case for each individual
2937 if (ccb->smpio.smp_request_sglist_cnt != 0) {
2938 bus_dma_segment_t *req_sg;
2940 req_sg = (bus_dma_segment_t *)ccb->smpio.smp_request;
2941 request = (uint8_t *)(uintptr_t)req_sg[0].ds_addr;
2943 request = ccb->smpio.smp_request;
2945 if (ccb->smpio.smp_response_sglist_cnt != 0) {
2946 bus_dma_segment_t *rsp_sg;
2948 rsp_sg = (bus_dma_segment_t *)ccb->smpio.smp_response;
2949 response = (uint8_t *)(uintptr_t)rsp_sg[0].ds_addr;
2951 response = ccb->smpio.smp_response;
2953 case CAM_DATA_VADDR:
2954 request = ccb->smpio.smp_request;
2955 response = ccb->smpio.smp_response;
2958 mprsas_set_ccbstatus(ccb, CAM_REQ_INVALID);
2963 cm = mpr_alloc_command(sc);
2965 mpr_dprint(sc, MPR_ERROR, "%s: cannot allocate command\n",
2967 mprsas_set_ccbstatus(ccb, CAM_RESRC_UNAVAIL);
2972 req = (MPI2_SMP_PASSTHROUGH_REQUEST *)cm->cm_req;
2973 bzero(req, sizeof(*req));
2974 req->Function = MPI2_FUNCTION_SMP_PASSTHROUGH;
2976 /* Allow the chip to use any route to this SAS address. */
2977 req->PhysicalPort = 0xff;
2979 req->RequestDataLength = htole16(ccb->smpio.smp_request_len);
2981 MPI2_SGLFLAGS_SYSTEM_ADDRESS_SPACE | MPI2_SGLFLAGS_SGL_TYPE_MPI;
2983 mpr_dprint(sc, MPR_XINFO, "%s: sending SMP request to SAS address "
2984 "%#jx\n", __func__, (uintmax_t)sasaddr);
2986 mpr_init_sge(cm, req, &req->SGL);
2989 * Set up a uio to pass into mpr_map_command(). This allows us to
2990 * do one map command, and one busdma call in there.
2992 cm->cm_uio.uio_iov = cm->cm_iovec;
2993 cm->cm_uio.uio_iovcnt = 2;
2994 cm->cm_uio.uio_segflg = UIO_SYSSPACE;
2997 * The read/write flag isn't used by busdma, but set it just in
2998 * case. This isn't exactly accurate, either, since we're going in
3001 cm->cm_uio.uio_rw = UIO_WRITE;
3003 cm->cm_iovec[0].iov_base = request;
3004 cm->cm_iovec[0].iov_len = le16toh(req->RequestDataLength);
3005 cm->cm_iovec[1].iov_base = response;
3006 cm->cm_iovec[1].iov_len = ccb->smpio.smp_response_len;
3008 cm->cm_uio.uio_resid = cm->cm_iovec[0].iov_len +
3009 cm->cm_iovec[1].iov_len;
3012 * Trigger a warning message in mpr_data_cb() for the user if we
3013 * wind up exceeding two S/G segments. The chip expects one
3014 * segment for the request and another for the response.
3016 cm->cm_max_segs = 2;
3018 cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
3019 cm->cm_complete = mprsas_smpio_complete;
3020 cm->cm_complete_data = ccb;
3023 * Tell the mapping code that we're using a uio, and that this is
3024 * an SMP passthrough request. There is a little special-case
3025 * logic there (in mpr_data_cb()) to handle the bidirectional
3028 cm->cm_flags |= MPR_CM_FLAGS_USE_UIO | MPR_CM_FLAGS_SMP_PASS |
3029 MPR_CM_FLAGS_DATAIN | MPR_CM_FLAGS_DATAOUT;
3031 /* The chip data format is little endian. */
3032 req->SASAddress.High = htole32(sasaddr >> 32);
3033 req->SASAddress.Low = htole32(sasaddr);
3036 * XXX Note that we don't have a timeout/abort mechanism here.
3037 * From the manual, it looks like task management requests only
3038 * work for SCSI IO and SATA passthrough requests. We may need to
3039 * have a mechanism to retry requests in the event of a chip reset
3040 * at least. Hopefully the chip will insure that any errors short
3041 * of that are relayed back to the driver.
3043 error = mpr_map_command(sc, cm);
3044 if ((error != 0) && (error != EINPROGRESS)) {
3045 mpr_dprint(sc, MPR_ERROR, "%s: error %d returned from "
3046 "mpr_map_command()\n", __func__, error);
3053 mpr_free_command(sc, cm);
3054 mprsas_set_ccbstatus(ccb, CAM_RESRC_UNAVAIL);
3060 mprsas_action_smpio(struct mprsas_softc *sassc, union ccb *ccb)
3062 struct mpr_softc *sc;
3063 struct mprsas_target *targ;
3064 uint64_t sasaddr = 0;
3069 * Make sure the target exists.
3071 KASSERT(ccb->ccb_h.target_id < sassc->maxtargets,
3072 ("Target %d out of bounds in XPT_SMP_IO\n", ccb->ccb_h.target_id));
3073 targ = &sassc->targets[ccb->ccb_h.target_id];
3074 if (targ->handle == 0x0) {
3075 mpr_dprint(sc, MPR_ERROR, "%s: target %d does not exist!\n",
3076 __func__, ccb->ccb_h.target_id);
3077 mprsas_set_ccbstatus(ccb, CAM_SEL_TIMEOUT);
3083 * If this device has an embedded SMP target, we'll talk to it
3085 * figure out what the expander's address is.
3087 if ((targ->devinfo & MPI2_SAS_DEVICE_INFO_SMP_TARGET) != 0)
3088 sasaddr = targ->sasaddr;
3091 * If we don't have a SAS address for the expander yet, try
3092 * grabbing it from the page 0x83 information cached in the
3093 * transport layer for this target. LSI expanders report the
3094 * expander SAS address as the port-associated SAS address in
3095 * Inquiry VPD page 0x83. Maxim expanders don't report it in page
3098 * XXX KDM disable this for now, but leave it commented out so that
3099 * it is obvious that this is another possible way to get the SAS
3102 * The parent handle method below is a little more reliable, and
3103 * the other benefit is that it works for devices other than SES
3104 * devices. So you can send a SMP request to a da(4) device and it
3105 * will get routed to the expander that device is attached to.
3106 * (Assuming the da(4) device doesn't contain an SMP target...)
3110 sasaddr = xpt_path_sas_addr(ccb->ccb_h.path);
3114 * If we still don't have a SAS address for the expander, look for
3115 * the parent device of this device, which is probably the expander.
3118 #ifdef OLD_MPR_PROBE
3119 struct mprsas_target *parent_target;
3122 if (targ->parent_handle == 0x0) {
3123 mpr_dprint(sc, MPR_ERROR, "%s: handle %d does not have "
3124 "a valid parent handle!\n", __func__, targ->handle);
3125 mprsas_set_ccbstatus(ccb, CAM_DEV_NOT_THERE);
3128 #ifdef OLD_MPR_PROBE
3129 parent_target = mprsas_find_target_by_handle(sassc, 0,
3130 targ->parent_handle);
3132 if (parent_target == NULL) {
3133 mpr_dprint(sc, MPR_ERROR, "%s: handle %d does not have "
3134 "a valid parent target!\n", __func__, targ->handle);
3135 mprsas_set_ccbstatus(ccb, CAM_DEV_NOT_THERE);
3139 if ((parent_target->devinfo &
3140 MPI2_SAS_DEVICE_INFO_SMP_TARGET) == 0) {
3141 mpr_dprint(sc, MPR_ERROR, "%s: handle %d parent %d "
3142 "does not have an SMP target!\n", __func__,
3143 targ->handle, parent_target->handle);
3144 mprsas_set_ccbstatus(ccb, CAM_DEV_NOT_THERE);
3148 sasaddr = parent_target->sasaddr;
3149 #else /* OLD_MPR_PROBE */
3150 if ((targ->parent_devinfo &
3151 MPI2_SAS_DEVICE_INFO_SMP_TARGET) == 0) {
3152 mpr_dprint(sc, MPR_ERROR, "%s: handle %d parent %d "
3153 "does not have an SMP target!\n", __func__,
3154 targ->handle, targ->parent_handle);
3155 mprsas_set_ccbstatus(ccb, CAM_DEV_NOT_THERE);
3158 if (targ->parent_sasaddr == 0x0) {
3159 mpr_dprint(sc, MPR_ERROR, "%s: handle %d parent handle "
3160 "%d does not have a valid SAS address!\n", __func__,
3161 targ->handle, targ->parent_handle);
3162 mprsas_set_ccbstatus(ccb, CAM_DEV_NOT_THERE);
3166 sasaddr = targ->parent_sasaddr;
3167 #endif /* OLD_MPR_PROBE */
3171 mpr_dprint(sc, MPR_INFO, "%s: unable to find SAS address for "
3172 "handle %d\n", __func__, targ->handle);
3173 mprsas_set_ccbstatus(ccb, CAM_DEV_NOT_THERE);
3176 mprsas_send_smpcmd(sassc, ccb, sasaddr);
3186 mprsas_action_resetdev(struct mprsas_softc *sassc, union ccb *ccb)
3188 MPI2_SCSI_TASK_MANAGE_REQUEST *req;
3189 struct mpr_softc *sc;
3190 struct mpr_command *tm;
3191 struct mprsas_target *targ;
3193 MPR_FUNCTRACE(sassc->sc);
3194 mtx_assert(&sassc->sc->mpr_mtx, MA_OWNED);
3196 KASSERT(ccb->ccb_h.target_id < sassc->maxtargets, ("Target %d out of "
3197 "bounds in XPT_RESET_DEV\n", ccb->ccb_h.target_id));
3199 tm = mprsas_alloc_tm(sc);
3201 mpr_dprint(sc, MPR_ERROR, "command alloc failure in "
3202 "mprsas_action_resetdev\n");
3203 mprsas_set_ccbstatus(ccb, CAM_RESRC_UNAVAIL);
3208 targ = &sassc->targets[ccb->ccb_h.target_id];
3209 req = (MPI2_SCSI_TASK_MANAGE_REQUEST *)tm->cm_req;
3210 req->DevHandle = htole16(targ->handle);
3211 req->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
3213 if (!targ->is_nvme || sc->custom_nvme_tm_handling) {
3214 /* SAS Hard Link Reset / SATA Link Reset */
3215 req->MsgFlags = MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET;
3217 /* PCIe Protocol Level Reset*/
3219 MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE;
3223 tm->cm_complete = mprsas_resetdev_complete;
3224 tm->cm_complete_data = ccb;
3226 mpr_dprint(sc, MPR_INFO, "%s: Sending reset for target ID %d\n",
3227 __func__, targ->tid);
3230 mprsas_prepare_for_tm(sc, tm, targ, CAM_LUN_WILDCARD);
3231 mpr_map_command(sc, tm);
3235 mprsas_resetdev_complete(struct mpr_softc *sc, struct mpr_command *tm)
3237 MPI2_SCSI_TASK_MANAGE_REPLY *resp;
3241 mtx_assert(&sc->mpr_mtx, MA_OWNED);
3243 resp = (MPI2_SCSI_TASK_MANAGE_REPLY *)tm->cm_reply;
3244 ccb = tm->cm_complete_data;
3247 * Currently there should be no way we can hit this case. It only
3248 * happens when we have a failure to allocate chain frames, and
3249 * task management commands don't have S/G lists.
3251 if ((tm->cm_flags & MPR_CM_FLAGS_ERROR_MASK) != 0) {
3252 MPI2_SCSI_TASK_MANAGE_REQUEST *req;
3254 req = (MPI2_SCSI_TASK_MANAGE_REQUEST *)tm->cm_req;
3256 mpr_dprint(sc, MPR_ERROR, "%s: cm_flags = %#x for reset of "
3257 "handle %#04x! This should not happen!\n", __func__,
3258 tm->cm_flags, req->DevHandle);
3259 mprsas_set_ccbstatus(ccb, CAM_REQ_CMP_ERR);
3263 mpr_dprint(sc, MPR_XINFO, "%s: IOCStatus = 0x%x ResponseCode = 0x%x\n",
3264 __func__, le16toh(resp->IOCStatus), le32toh(resp->ResponseCode));
3266 if (le32toh(resp->ResponseCode) == MPI2_SCSITASKMGMT_RSP_TM_COMPLETE) {
3267 mprsas_set_ccbstatus(ccb, CAM_REQ_CMP);
3268 mprsas_announce_reset(sc, AC_SENT_BDR, tm->cm_targ->tid,
3272 mprsas_set_ccbstatus(ccb, CAM_REQ_CMP_ERR);
3276 mprsas_free_tm(sc, tm);
3281 mprsas_poll(struct cam_sim *sim)
3283 struct mprsas_softc *sassc;
3285 sassc = cam_sim_softc(sim);
3287 if (sassc->sc->mpr_debug & MPR_TRACE) {
3288 /* frequent debug messages during a panic just slow
3289 * everything down too much.
3291 mpr_dprint(sassc->sc, MPR_XINFO, "%s clearing MPR_TRACE\n",
3293 sassc->sc->mpr_debug &= ~MPR_TRACE;
3296 mpr_intr_locked(sassc->sc);
3300 mprsas_async(void *callback_arg, uint32_t code, struct cam_path *path,
3303 struct mpr_softc *sc;
3305 sc = (struct mpr_softc *)callback_arg;
3308 case AC_ADVINFO_CHANGED: {
3309 struct mprsas_target *target;
3310 struct mprsas_softc *sassc;
3311 struct scsi_read_capacity_data_long rcap_buf;
3312 struct ccb_dev_advinfo cdai;
3313 struct mprsas_lun *lun;
3318 buftype = (uintptr_t)arg;
3324 * We're only interested in read capacity data changes.
3326 if (buftype != CDAI_TYPE_RCAPLONG)
3330 * We should have a handle for this, but check to make sure.
3332 KASSERT(xpt_path_target_id(path) < sassc->maxtargets,
3333 ("Target %d out of bounds in mprsas_async\n",
3334 xpt_path_target_id(path)));
3335 target = &sassc->targets[xpt_path_target_id(path)];
3336 if (target->handle == 0)
3339 lunid = xpt_path_lun_id(path);
3341 SLIST_FOREACH(lun, &target->luns, lun_link) {
3342 if (lun->lun_id == lunid) {
3348 if (found_lun == 0) {
3349 lun = malloc(sizeof(struct mprsas_lun), M_MPR,
3352 mpr_dprint(sc, MPR_ERROR, "Unable to alloc "
3353 "LUN for EEDP support.\n");
3356 lun->lun_id = lunid;
3357 SLIST_INSERT_HEAD(&target->luns, lun, lun_link);
3360 bzero(&rcap_buf, sizeof(rcap_buf));
3361 bzero(&cdai, sizeof(cdai));
3362 xpt_setup_ccb(&cdai.ccb_h, path, CAM_PRIORITY_NORMAL);
3363 cdai.ccb_h.func_code = XPT_DEV_ADVINFO;
3364 cdai.ccb_h.flags = CAM_DIR_IN;
3365 cdai.buftype = CDAI_TYPE_RCAPLONG;
3366 cdai.flags = CDAI_FLAG_NONE;
3367 cdai.bufsiz = sizeof(rcap_buf);
3368 cdai.buf = (uint8_t *)&rcap_buf;
3369 xpt_action((union ccb *)&cdai);
3370 if ((cdai.ccb_h.status & CAM_DEV_QFRZN) != 0)
3371 cam_release_devq(cdai.ccb_h.path, 0, 0, 0, FALSE);
3373 if ((mprsas_get_ccbstatus((union ccb *)&cdai) == CAM_REQ_CMP)
3374 && (rcap_buf.prot & SRC16_PROT_EN)) {
3375 switch (rcap_buf.prot & SRC16_P_TYPE) {
3378 lun->eedp_formatted = TRUE;
3379 lun->eedp_block_size =
3380 scsi_4btoul(rcap_buf.length);
3384 lun->eedp_formatted = FALSE;
3385 lun->eedp_block_size = 0;
3389 lun->eedp_formatted = FALSE;
3390 lun->eedp_block_size = 0;
3394 case AC_FOUND_DEVICE:
3401 * Set the INRESET flag for this target so that no I/O will be sent to
3402 * the target until the reset has completed. If an I/O request does
3403 * happen, the devq will be frozen. The CCB holds the path which is
3404 * used to release the devq. The devq is released and the CCB is freed
3405 * when the TM completes.
3408 mprsas_prepare_for_tm(struct mpr_softc *sc, struct mpr_command *tm,
3409 struct mprsas_target *target, lun_id_t lun_id)
3414 ccb = xpt_alloc_ccb_nowait();
3416 path_id = cam_sim_path(sc->sassc->sim);
3417 if (xpt_create_path(&ccb->ccb_h.path, xpt_periph, path_id,
3418 target->tid, lun_id) != CAM_REQ_CMP) {
3422 tm->cm_targ = target;
3423 target->flags |= MPRSAS_TARGET_INRESET;
3429 mprsas_startup(struct mpr_softc *sc)
3432 * Send the port enable message and set the wait_for_port_enable flag.
3433 * This flag helps to keep the simq frozen until all discovery events
3436 sc->wait_for_port_enable = 1;
3437 mprsas_send_portenable(sc);
3442 mprsas_send_portenable(struct mpr_softc *sc)
3444 MPI2_PORT_ENABLE_REQUEST *request;
3445 struct mpr_command *cm;
3449 if ((cm = mpr_alloc_command(sc)) == NULL)
3451 request = (MPI2_PORT_ENABLE_REQUEST *)cm->cm_req;
3452 request->Function = MPI2_FUNCTION_PORT_ENABLE;
3453 request->MsgFlags = 0;
3455 cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
3456 cm->cm_complete = mprsas_portenable_complete;
3460 mpr_map_command(sc, cm);
3461 mpr_dprint(sc, MPR_XINFO,
3462 "mpr_send_portenable finished cm %p req %p complete %p\n",
3463 cm, cm->cm_req, cm->cm_complete);
3468 mprsas_portenable_complete(struct mpr_softc *sc, struct mpr_command *cm)
3470 MPI2_PORT_ENABLE_REPLY *reply;
3471 struct mprsas_softc *sassc;
3477 * Currently there should be no way we can hit this case. It only
3478 * happens when we have a failure to allocate chain frames, and
3479 * port enable commands don't have S/G lists.
3481 if ((cm->cm_flags & MPR_CM_FLAGS_ERROR_MASK) != 0) {
3482 mpr_dprint(sc, MPR_ERROR, "%s: cm_flags = %#x for port enable! "
3483 "This should not happen!\n", __func__, cm->cm_flags);
3486 reply = (MPI2_PORT_ENABLE_REPLY *)cm->cm_reply;
3488 mpr_dprint(sc, MPR_FAULT, "Portenable NULL reply\n");
3489 else if ((le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK) !=
3490 MPI2_IOCSTATUS_SUCCESS)
3491 mpr_dprint(sc, MPR_FAULT, "Portenable failed\n");
3493 mpr_free_command(sc, cm);
3495 * Done waiting for port enable to complete. Decrement the refcount.
3496 * If refcount is 0, discovery is complete and a rescan of the bus can
3499 sc->wait_for_port_enable = 0;
3500 sc->port_enable_complete = 1;
3501 wakeup(&sc->port_enable_complete);
3502 mprsas_startup_decrement(sassc);
3506 mprsas_check_id(struct mprsas_softc *sassc, int id)
3508 struct mpr_softc *sc = sassc->sc;
3512 ids = &sc->exclude_ids[0];
3513 while((name = strsep(&ids, ",")) != NULL) {
3514 if (name[0] == '\0')
3516 if (strtol(name, NULL, 0) == (long)id)
3524 mprsas_realloc_targets(struct mpr_softc *sc, int maxtargets)
3526 struct mprsas_softc *sassc;
3527 struct mprsas_lun *lun, *lun_tmp;
3528 struct mprsas_target *targ;
3533 * The number of targets is based on IOC Facts, so free all of
3534 * the allocated LUNs for each target and then the target buffer
3537 for (i=0; i< maxtargets; i++) {
3538 targ = &sassc->targets[i];
3539 SLIST_FOREACH_SAFE(lun, &targ->luns, lun_link, lun_tmp) {
3543 free(sassc->targets, M_MPR);
3545 sassc->targets = malloc(sizeof(struct mprsas_target) * maxtargets,
3546 M_MPR, M_WAITOK|M_ZERO);