2 * Copyright (c) 2011-2015 LSI Corp.
3 * Copyright (c) 2013-2016 Avago Technologies
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27 * Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD
30 #include <sys/cdefs.h>
31 __FBSDID("$FreeBSD$");
33 /* Communications core for Avago Technologies (LSI) MPT3 */
35 /* TODO Move headers to mprvar */
36 #include <sys/types.h>
37 #include <sys/param.h>
38 #include <sys/systm.h>
39 #include <sys/kernel.h>
40 #include <sys/selinfo.h>
41 #include <sys/module.h>
45 #include <sys/malloc.h>
47 #include <sys/sysctl.h>
48 #include <sys/endian.h>
49 #include <sys/queue.h>
50 #include <sys/kthread.h>
51 #include <sys/taskqueue.h>
54 #include <machine/bus.h>
55 #include <machine/resource.h>
58 #include <machine/stdarg.h>
61 #include <cam/cam_ccb.h>
62 #include <cam/cam_debug.h>
63 #include <cam/cam_sim.h>
64 #include <cam/cam_xpt_sim.h>
65 #include <cam/cam_xpt_periph.h>
66 #include <cam/cam_periph.h>
67 #include <cam/scsi/scsi_all.h>
68 #include <cam/scsi/scsi_message.h>
70 #include <dev/mpr/mpi/mpi2_type.h>
71 #include <dev/mpr/mpi/mpi2.h>
72 #include <dev/mpr/mpi/mpi2_ioc.h>
73 #include <dev/mpr/mpi/mpi2_sas.h>
74 #include <dev/mpr/mpi/mpi2_pci.h>
75 #include <dev/mpr/mpi/mpi2_cnfg.h>
76 #include <dev/mpr/mpi/mpi2_init.h>
77 #include <dev/mpr/mpi/mpi2_raid.h>
78 #include <dev/mpr/mpi/mpi2_tool.h>
79 #include <dev/mpr/mpr_ioctl.h>
80 #include <dev/mpr/mprvar.h>
81 #include <dev/mpr/mpr_table.h>
82 #include <dev/mpr/mpr_sas.h>
84 /* For Hashed SAS Address creation for SATA Drives */
85 #define MPT2SAS_SN_LEN 20
86 #define MPT2SAS_MN_LEN 40
88 struct mpr_fw_event_work {
91 TAILQ_ENTRY(mpr_fw_event_work) ev_link;
94 union _sata_sas_address {
103 * define the IDENTIFY DEVICE structure
105 struct _ata_identify_device_data {
106 u16 reserved1[10]; /* 0-9 */
107 u16 serial_number[10]; /* 10-19 */
108 u16 reserved2[7]; /* 20-26 */
109 u16 model_number[20]; /* 27-46*/
110 u16 reserved3[170]; /* 47-216 */
111 u16 rotational_speed; /* 217 */
112 u16 reserved4[38]; /* 218-255 */
114 static u32 event_count;
115 static void mprsas_fw_work(struct mpr_softc *sc,
116 struct mpr_fw_event_work *fw_event);
117 static void mprsas_fw_event_free(struct mpr_softc *,
118 struct mpr_fw_event_work *);
119 static int mprsas_add_device(struct mpr_softc *sc, u16 handle, u8 linkrate);
120 static int mprsas_add_pcie_device(struct mpr_softc *sc, u16 handle,
122 static int mprsas_get_sata_identify(struct mpr_softc *sc, u16 handle,
123 Mpi2SataPassthroughReply_t *mpi_reply, char *id_buffer, int sz,
125 static void mprsas_ata_id_timeout(void *data);
126 int mprsas_get_sas_address_for_sata_disk(struct mpr_softc *sc,
127 u64 *sas_address, u16 handle, u32 device_info, u8 *is_SATA_SSD);
128 static int mprsas_volume_add(struct mpr_softc *sc,
130 static void mprsas_SSU_to_SATA_devices(struct mpr_softc *sc);
131 static void mprsas_stop_unit_done(struct cam_periph *periph,
132 union ccb *done_ccb);
135 mprsas_evt_handler(struct mpr_softc *sc, uintptr_t data,
136 MPI2_EVENT_NOTIFICATION_REPLY *event)
138 struct mpr_fw_event_work *fw_event;
141 mpr_dprint(sc, MPR_TRACE, "%s\n", __func__);
142 MPR_DPRINT_EVENT(sc, sas, event);
143 mprsas_record_event(sc, event);
145 fw_event = malloc(sizeof(struct mpr_fw_event_work), M_MPR,
148 printf("%s: allocate failed for fw_event\n", __func__);
151 sz = le16toh(event->EventDataLength) * 4;
152 fw_event->event_data = malloc(sz, M_MPR, M_ZERO|M_NOWAIT);
153 if (!fw_event->event_data) {
154 printf("%s: allocate failed for event_data\n", __func__);
155 free(fw_event, M_MPR);
159 bcopy(event->EventData, fw_event->event_data, sz);
160 fw_event->event = event->Event;
161 if ((event->Event == MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST ||
162 event->Event == MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST ||
163 event->Event == MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE ||
164 event->Event == MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST) &&
165 sc->track_mapping_events)
166 sc->pending_map_events++;
169 * When wait_for_port_enable flag is set, make sure that all the events
170 * are processed. Increment the startup_refcount and decrement it after
171 * events are processed.
173 if ((event->Event == MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST ||
174 event->Event == MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST ||
175 event->Event == MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST) &&
176 sc->wait_for_port_enable)
177 mprsas_startup_increment(sc->sassc);
179 TAILQ_INSERT_TAIL(&sc->sassc->ev_queue, fw_event, ev_link);
180 taskqueue_enqueue(sc->sassc->ev_tq, &sc->sassc->ev_task);
184 mprsas_fw_event_free(struct mpr_softc *sc, struct mpr_fw_event_work *fw_event)
187 free(fw_event->event_data, M_MPR);
188 free(fw_event, M_MPR);
192 * _mpr_fw_work - delayed task for processing firmware events
193 * @sc: per adapter object
194 * @fw_event: The fw_event_work object
200 mprsas_fw_work(struct mpr_softc *sc, struct mpr_fw_event_work *fw_event)
202 struct mprsas_softc *sassc;
205 mpr_dprint(sc, MPR_EVENT, "(%d)->(%s) Working on Event: [%x]\n",
206 event_count++, __func__, fw_event->event);
207 switch (fw_event->event) {
208 case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
210 MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST *data;
211 MPI2_EVENT_SAS_TOPO_PHY_ENTRY *phy;
214 data = (MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST *)
215 fw_event->event_data;
217 mpr_mapping_topology_change_event(sc, fw_event->event_data);
219 for (i = 0; i < data->NumEntries; i++) {
221 switch (phy->PhyStatus & MPI2_EVENT_SAS_TOPO_RC_MASK) {
222 case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED:
223 if (mprsas_add_device(sc,
224 le16toh(phy->AttachedDevHandle),
226 mpr_dprint(sc, MPR_ERROR, "%s: "
227 "failed to add device with handle "
229 le16toh(phy->AttachedDevHandle));
230 mprsas_prepare_remove(sassc, le16toh(
231 phy->AttachedDevHandle));
234 case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING:
235 mprsas_prepare_remove(sassc, le16toh(
236 phy->AttachedDevHandle));
238 case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED:
239 case MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE:
240 case MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING:
246 * refcount was incremented for this event in
247 * mprsas_evt_handler. Decrement it here because the event has
250 mprsas_startup_decrement(sassc);
253 case MPI2_EVENT_SAS_DISCOVERY:
255 MPI2_EVENT_DATA_SAS_DISCOVERY *data;
257 data = (MPI2_EVENT_DATA_SAS_DISCOVERY *)fw_event->event_data;
259 if (data->ReasonCode & MPI2_EVENT_SAS_DISC_RC_STARTED)
260 mpr_dprint(sc, MPR_TRACE,"SAS discovery start event\n");
261 if (data->ReasonCode & MPI2_EVENT_SAS_DISC_RC_COMPLETED) {
262 mpr_dprint(sc, MPR_TRACE,"SAS discovery stop event\n");
263 sassc->flags &= ~MPRSAS_IN_DISCOVERY;
264 mprsas_discovery_end(sassc);
268 case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
270 Mpi2EventDataSasEnclDevStatusChange_t *data;
271 data = (Mpi2EventDataSasEnclDevStatusChange_t *)
272 fw_event->event_data;
273 mpr_mapping_enclosure_dev_status_change_event(sc,
274 fw_event->event_data);
277 case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
279 Mpi2EventIrConfigElement_t *element;
281 u8 foreign_config, reason;
283 Mpi2EventDataIrConfigChangeList_t *event_data;
284 struct mprsas_target *targ;
287 event_data = fw_event->event_data;
288 foreign_config = (le32toh(event_data->Flags) &
289 MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? 1 : 0;
292 (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
293 id = mpr_mapping_get_raid_tid_from_handle(sc,
294 element->VolDevHandle);
296 mpr_mapping_ir_config_change_event(sc, event_data);
297 for (i = 0; i < event_data->NumElements; i++, element++) {
298 reason = element->ReasonCode;
299 elementType = le16toh(element->ElementFlags) &
300 MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK;
302 * check for element type of Phys Disk or Hot Spare
305 MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT)
307 MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT))
312 * check for reason of Hide, Unhide, PD Created, or PD
315 if ((reason != MPI2_EVENT_IR_CHANGE_RC_HIDE) &&
316 (reason != MPI2_EVENT_IR_CHANGE_RC_UNHIDE) &&
317 (reason != MPI2_EVENT_IR_CHANGE_RC_PD_CREATED) &&
318 (reason != MPI2_EVENT_IR_CHANGE_RC_PD_DELETED))
321 // check for a reason of Hide or PD Created
322 if ((reason == MPI2_EVENT_IR_CHANGE_RC_HIDE) ||
323 (reason == MPI2_EVENT_IR_CHANGE_RC_PD_CREATED))
325 // build RAID Action message
326 Mpi2RaidActionRequest_t *action;
327 Mpi2RaidActionReply_t *reply = NULL;
328 struct mpr_command *cm;
330 if ((cm = mpr_alloc_command(sc)) == NULL) {
331 printf("%s: command alloc failed\n",
336 mpr_dprint(sc, MPR_EVENT, "Sending FP action "
338 "MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST "
340 action = (MPI2_RAID_ACTION_REQUEST *)cm->cm_req;
341 action->Function = MPI2_FUNCTION_RAID_ACTION;
343 MPI2_RAID_ACTION_PHYSDISK_HIDDEN;
344 action->PhysDiskNum = element->PhysDiskNum;
345 cm->cm_desc.Default.RequestFlags =
346 MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
347 error = mpr_request_polled(sc, &cm);
349 reply = (Mpi2RaidActionReply_t *)
351 if (error || (reply == NULL)) {
354 * If the poll returns error then we
355 * need to do diag reset
357 printf("%s: poll for page completed "
358 "with error %d", __func__, error);
360 if (reply && (le16toh(reply->IOCStatus) &
361 MPI2_IOCSTATUS_MASK) !=
362 MPI2_IOCSTATUS_SUCCESS) {
363 mpr_dprint(sc, MPR_ERROR, "%s: error "
364 "sending RaidActionPage; "
365 "iocstatus = 0x%x\n", __func__,
366 le16toh(reply->IOCStatus));
370 mpr_free_command(sc, cm);
373 mpr_dprint(sc, MPR_EVENT, "Received "
374 "MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST Reason "
375 "code %x:\n", element->ReasonCode);
376 switch (element->ReasonCode) {
377 case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED:
378 case MPI2_EVENT_IR_CHANGE_RC_ADDED:
379 if (!foreign_config) {
380 if (mprsas_volume_add(sc,
381 le16toh(element->VolDevHandle))) {
382 printf("%s: failed to add RAID "
383 "volume with handle 0x%x\n",
384 __func__, le16toh(element->
389 case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED:
390 case MPI2_EVENT_IR_CHANGE_RC_REMOVED:
392 * Rescan after volume is deleted or removed.
394 if (!foreign_config) {
395 if (id == MPR_MAP_BAD_ID) {
396 printf("%s: could not get ID "
397 "for volume with handle "
398 "0x%04x\n", __func__,
404 targ = &sassc->targets[id];
406 targ->encl_slot = 0x0;
407 targ->encl_handle = 0x0;
408 targ->encl_level_valid = 0x0;
409 targ->encl_level = 0x0;
410 targ->connector_name[0] = ' ';
411 targ->connector_name[1] = ' ';
412 targ->connector_name[2] = ' ';
413 targ->connector_name[3] = ' ';
414 targ->exp_dev_handle = 0x0;
416 targ->linkrate = 0x0;
417 mprsas_rescan_target(sc, targ);
418 printf("RAID target id 0x%x removed\n",
422 case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED:
423 case MPI2_EVENT_IR_CHANGE_RC_HIDE:
425 * Phys Disk of a volume has been created. Hide
428 targ = mprsas_find_target_by_handle(sassc, 0,
429 element->PhysDiskDevHandle);
432 targ->flags |= MPR_TARGET_FLAGS_RAID_COMPONENT;
433 mprsas_rescan_target(sc, targ);
435 case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED:
437 * Phys Disk of a volume has been deleted.
438 * Expose it to the OS.
440 if (mprsas_add_device(sc,
441 le16toh(element->PhysDiskDevHandle), 0)) {
442 printf("%s: failed to add device with "
443 "handle 0x%x\n", __func__,
446 mprsas_prepare_remove(sassc,
454 * refcount was incremented for this event in
455 * mprsas_evt_handler. Decrement it here because the event has
458 mprsas_startup_decrement(sassc);
461 case MPI2_EVENT_IR_VOLUME:
463 Mpi2EventDataIrVolume_t *event_data = fw_event->event_data;
466 * Informational only.
468 mpr_dprint(sc, MPR_EVENT, "Received IR Volume event:\n");
469 switch (event_data->ReasonCode) {
470 case MPI2_EVENT_IR_VOLUME_RC_SETTINGS_CHANGED:
471 mpr_dprint(sc, MPR_EVENT, " Volume Settings "
472 "changed from 0x%x to 0x%x for Volome with "
473 "handle 0x%x", le32toh(event_data->PreviousValue),
474 le32toh(event_data->NewValue),
475 le16toh(event_data->VolDevHandle));
477 case MPI2_EVENT_IR_VOLUME_RC_STATUS_FLAGS_CHANGED:
478 mpr_dprint(sc, MPR_EVENT, " Volume Status "
479 "changed from 0x%x to 0x%x for Volome with "
480 "handle 0x%x", le32toh(event_data->PreviousValue),
481 le32toh(event_data->NewValue),
482 le16toh(event_data->VolDevHandle));
484 case MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED:
485 mpr_dprint(sc, MPR_EVENT, " Volume State "
486 "changed from 0x%x to 0x%x for Volome with "
487 "handle 0x%x", le32toh(event_data->PreviousValue),
488 le32toh(event_data->NewValue),
489 le16toh(event_data->VolDevHandle));
491 struct mprsas_target *targ;
492 state = le32toh(event_data->NewValue);
494 case MPI2_RAID_VOL_STATE_MISSING:
495 case MPI2_RAID_VOL_STATE_FAILED:
496 mprsas_prepare_volume_remove(sassc,
497 event_data->VolDevHandle);
500 case MPI2_RAID_VOL_STATE_ONLINE:
501 case MPI2_RAID_VOL_STATE_DEGRADED:
502 case MPI2_RAID_VOL_STATE_OPTIMAL:
504 mprsas_find_target_by_handle(sassc,
505 0, event_data->VolDevHandle);
507 printf("%s %d: Volume handle "
508 "0x%x is already added \n",
510 event_data->VolDevHandle);
513 if (mprsas_volume_add(sc,
516 printf("%s: failed to add RAID "
517 "volume with handle 0x%x\n",
519 event_data->VolDevHandle));
531 case MPI2_EVENT_IR_PHYSICAL_DISK:
533 Mpi2EventDataIrPhysicalDisk_t *event_data =
534 fw_event->event_data;
535 struct mprsas_target *targ;
538 * Informational only.
540 mpr_dprint(sc, MPR_EVENT, "Received IR Phys Disk event:\n");
541 switch (event_data->ReasonCode) {
542 case MPI2_EVENT_IR_PHYSDISK_RC_SETTINGS_CHANGED:
543 mpr_dprint(sc, MPR_EVENT, " Phys Disk Settings "
544 "changed from 0x%x to 0x%x for Phys Disk Number "
545 "%d and handle 0x%x at Enclosure handle 0x%x, Slot "
546 "%d", le32toh(event_data->PreviousValue),
547 le32toh(event_data->NewValue),
548 event_data->PhysDiskNum,
549 le16toh(event_data->PhysDiskDevHandle),
550 le16toh(event_data->EnclosureHandle),
551 le16toh(event_data->Slot));
553 case MPI2_EVENT_IR_PHYSDISK_RC_STATUS_FLAGS_CHANGED:
554 mpr_dprint(sc, MPR_EVENT, " Phys Disk Status changed "
555 "from 0x%x to 0x%x for Phys Disk Number %d and "
556 "handle 0x%x at Enclosure handle 0x%x, Slot %d",
557 le32toh(event_data->PreviousValue),
558 le32toh(event_data->NewValue),
559 event_data->PhysDiskNum,
560 le16toh(event_data->PhysDiskDevHandle),
561 le16toh(event_data->EnclosureHandle),
562 le16toh(event_data->Slot));
564 case MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED:
565 mpr_dprint(sc, MPR_EVENT, " Phys Disk State changed "
566 "from 0x%x to 0x%x for Phys Disk Number %d and "
567 "handle 0x%x at Enclosure handle 0x%x, Slot %d",
568 le32toh(event_data->PreviousValue),
569 le32toh(event_data->NewValue),
570 event_data->PhysDiskNum,
571 le16toh(event_data->PhysDiskDevHandle),
572 le16toh(event_data->EnclosureHandle),
573 le16toh(event_data->Slot));
574 switch (event_data->NewValue) {
575 case MPI2_RAID_PD_STATE_ONLINE:
576 case MPI2_RAID_PD_STATE_DEGRADED:
577 case MPI2_RAID_PD_STATE_REBUILDING:
578 case MPI2_RAID_PD_STATE_OPTIMAL:
579 case MPI2_RAID_PD_STATE_HOT_SPARE:
580 targ = mprsas_find_target_by_handle(
582 event_data->PhysDiskDevHandle);
585 MPR_TARGET_FLAGS_RAID_COMPONENT;
586 printf("%s %d: Found Target "
587 "for handle 0x%x.\n",
593 case MPI2_RAID_PD_STATE_OFFLINE:
594 case MPI2_RAID_PD_STATE_NOT_CONFIGURED:
595 case MPI2_RAID_PD_STATE_NOT_COMPATIBLE:
597 targ = mprsas_find_target_by_handle(
599 event_data->PhysDiskDevHandle);
602 ~MPR_TARGET_FLAGS_RAID_COMPONENT;
603 printf("%s %d: Found Target "
604 "for handle 0x%x. \n",
616 case MPI2_EVENT_IR_OPERATION_STATUS:
618 Mpi2EventDataIrOperationStatus_t *event_data =
619 fw_event->event_data;
622 * Informational only.
624 mpr_dprint(sc, MPR_EVENT, "Received IR Op Status event:\n");
625 mpr_dprint(sc, MPR_EVENT, " RAID Operation of %d is %d "
626 "percent complete for Volume with handle 0x%x",
627 event_data->RAIDOperation, event_data->PercentComplete,
628 le16toh(event_data->VolDevHandle));
631 case MPI2_EVENT_TEMP_THRESHOLD:
633 pMpi2EventDataTemperature_t temp_event;
635 temp_event = (pMpi2EventDataTemperature_t)fw_event->event_data;
638 * The Temp Sensor Count must be greater than the event's Sensor
639 * Num to be valid. If valid, print the temp thresholds that
640 * have been exceeded.
642 if (sc->iounit_pg8.NumSensors > temp_event->SensorNum) {
643 mpr_dprint(sc, MPR_FAULT, "Temperature Threshold flags "
644 "%s %s %s %s exceeded for Sensor: %d !!!\n",
645 ((temp_event->Status & 0x01) == 1) ? "0 " : " ",
646 ((temp_event->Status & 0x02) == 2) ? "1 " : " ",
647 ((temp_event->Status & 0x04) == 4) ? "2 " : " ",
648 ((temp_event->Status & 0x08) == 8) ? "3 " : " ",
649 temp_event->SensorNum);
650 mpr_dprint(sc, MPR_FAULT, "Current Temp in Celsius: "
651 "%d\n", temp_event->CurrentTemperature);
655 case MPI2_EVENT_ACTIVE_CABLE_EXCEPTION:
657 pMpi26EventDataActiveCableExcept_t ace_event_data;
659 (pMpi26EventDataActiveCableExcept_t)fw_event->event_data;
661 switch(ace_event_data->ReasonCode) {
662 case MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER:
664 mpr_printf(sc, "Currently a cable with "
665 "ReceptacleID %d cannot be powered and device "
666 "connected to this active cable will not be seen. "
667 "This active cable requires %d mW of power.\n",
668 ace_event_data->ReceptacleID,
669 ace_event_data->ActiveCablePowerRequirement);
672 case MPI26_EVENT_ACTIVE_CABLE_DEGRADED:
674 mpr_printf(sc, "Currently a cable with "
675 "ReceptacleID %d is not running at optimal speed "
676 "(12 Gb/s rate)\n", ace_event_data->ReceptacleID);
684 case MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST:
686 MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST *data;
687 MPI26_EVENT_PCIE_TOPO_PORT_ENTRY *port_entry;
688 uint8_t i, link_rate;
691 data = (MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST *)
692 fw_event->event_data;
694 mpr_mapping_pcie_topology_change_event(sc,
695 fw_event->event_data);
697 for (i = 0; i < data->NumEntries; i++) {
698 port_entry = &data->PortEntry[i];
699 handle = le16toh(port_entry->AttachedDevHandle);
700 link_rate = port_entry->CurrentPortInfo &
701 MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK;
702 switch (port_entry->PortStatus) {
703 case MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED:
705 MPI26_EVENT_PCIE_TOPO_PI_RATE_2_5) {
706 mpr_dprint(sc, MPR_ERROR, "%s: Cannot "
707 "add PCIe device with handle 0x%x "
708 "with unknown link rate.\n",
712 if (mprsas_add_pcie_device(sc, handle,
714 mpr_dprint(sc, MPR_ERROR, "%s: failed "
715 "to add PCIe device with handle "
716 "0x%x\n", __func__, handle);
717 mprsas_prepare_remove(sassc, handle);
720 case MPI26_EVENT_PCIE_TOPO_PS_NOT_RESPONDING:
721 mprsas_prepare_remove(sassc, handle);
723 case MPI26_EVENT_PCIE_TOPO_PS_PORT_CHANGED:
724 case MPI26_EVENT_PCIE_TOPO_PS_NO_CHANGE:
725 case MPI26_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING:
731 * refcount was incremented for this event in
732 * mprsas_evt_handler. Decrement it here because the event has
735 mprsas_startup_decrement(sassc);
738 case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
739 case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
741 mpr_dprint(sc, MPR_TRACE,"Unhandled event 0x%0X\n",
746 mpr_dprint(sc, MPR_EVENT, "(%d)->(%s) Event Free: [%x]\n", event_count,
747 __func__, fw_event->event);
748 mprsas_fw_event_free(sc, fw_event);
752 mprsas_firmware_event_work(void *arg, int pending)
754 struct mpr_fw_event_work *fw_event;
755 struct mpr_softc *sc;
757 sc = (struct mpr_softc *)arg;
759 while ((fw_event = TAILQ_FIRST(&sc->sassc->ev_queue)) != NULL) {
760 TAILQ_REMOVE(&sc->sassc->ev_queue, fw_event, ev_link);
761 mprsas_fw_work(sc, fw_event);
767 mprsas_add_device(struct mpr_softc *sc, u16 handle, u8 linkrate)
770 struct mprsas_softc *sassc;
771 struct mprsas_target *targ;
772 Mpi2ConfigReply_t mpi_reply;
773 Mpi2SasDevicePage0_t config_page;
774 uint64_t sas_address, parent_sas_address = 0;
775 u32 device_info, parent_devinfo = 0;
777 int ret = 1, error = 0, i;
778 struct mprsas_lun *lun;
780 struct mpr_command *cm;
783 mprsas_startup_increment(sassc);
784 if ((mpr_config_get_sas_device_pg0(sc, &mpi_reply, &config_page,
785 MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
786 printf("%s: error reading SAS device page0\n", __func__);
791 device_info = le32toh(config_page.DeviceInfo);
793 if (((device_info & MPI2_SAS_DEVICE_INFO_SMP_TARGET) == 0)
794 && (le16toh(config_page.ParentDevHandle) != 0)) {
795 Mpi2ConfigReply_t tmp_mpi_reply;
796 Mpi2SasDevicePage0_t parent_config_page;
798 if ((mpr_config_get_sas_device_pg0(sc, &tmp_mpi_reply,
799 &parent_config_page, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
800 le16toh(config_page.ParentDevHandle)))) {
801 mpr_dprint(sc, MPR_MAPPING|MPR_FAULT,
802 "%s: error reading SAS device %#x page0\n",
803 __func__, le16toh(config_page.ParentDevHandle));
805 parent_sas_address = parent_config_page.SASAddress.High;
806 parent_sas_address = (parent_sas_address << 32) |
807 parent_config_page.SASAddress.Low;
808 parent_devinfo = le32toh(parent_config_page.DeviceInfo);
811 /* TODO Check proper endianness */
812 sas_address = config_page.SASAddress.High;
813 sas_address = (sas_address << 32) | config_page.SASAddress.Low;
814 mpr_dprint(sc, MPR_MAPPING, "Handle 0x%04x SAS Address from SAS device "
815 "page0 = %jx\n", handle, sas_address);
818 * Always get SATA Identify information because this is used to
819 * determine if Start/Stop Unit should be sent to the drive when the
820 * system is shutdown.
822 if (device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE) {
823 ret = mprsas_get_sas_address_for_sata_disk(sc, &sas_address,
824 handle, device_info, &is_SATA_SSD);
826 mpr_dprint(sc, MPR_MAPPING|MPR_ERROR,
827 "%s: failed to get disk type (SSD or HDD) for SATA "
828 "device with handle 0x%04x\n",
831 mpr_dprint(sc, MPR_MAPPING, "Handle 0x%04x SAS Address "
832 "from SATA device = %jx\n", handle, sas_address);
838 * 1 - use the PhyNum field as a fallback to the mapping logic
839 * 0 - never use the PhyNum field
840 * -1 - only use the PhyNum field
842 * Note that using the Phy number to map a device can cause device adds
843 * to fail if multiple enclosures/expanders are in the topology. For
844 * example, if two devices are in the same slot number in two different
845 * enclosures within the topology, only one of those devices will be
846 * added. PhyNum mapping should not be used if multiple enclosures are
850 if (sc->use_phynum != -1)
851 id = mpr_mapping_get_tid(sc, sas_address, handle);
852 if (id == MPR_MAP_BAD_ID) {
853 if ((sc->use_phynum == 0) ||
854 ((id = config_page.PhyNum) > sassc->maxtargets)) {
855 mpr_dprint(sc, MPR_INFO, "failure at %s:%d/%s()! "
856 "Could not get ID for device with handle 0x%04x\n",
857 __FILE__, __LINE__, __func__, handle);
862 mpr_dprint(sc, MPR_MAPPING, "%s: Target ID for added device is %d.\n",
866 * Only do the ID check and reuse check if the target is not from a
867 * RAID Component. For Physical Disks of a Volume, the ID will be reused
868 * when a volume is deleted because the mapping entry for the PD will
869 * still be in the mapping table. The ID check should not be done here
870 * either since this PD is already being used.
872 targ = &sassc->targets[id];
873 if (!(targ->flags & MPR_TARGET_FLAGS_RAID_COMPONENT)) {
874 if (mprsas_check_id(sassc, id) != 0) {
875 mpr_dprint(sc, MPR_MAPPING|MPR_INFO,
876 "Excluding target id %d\n", id);
881 if (targ->handle != 0x0) {
882 mpr_dprint(sc, MPR_MAPPING, "Attempting to reuse "
883 "target id %d handle 0x%04x\n", id, targ->handle);
889 targ->devinfo = device_info;
890 targ->devname = le32toh(config_page.DeviceName.High);
891 targ->devname = (targ->devname << 32) |
892 le32toh(config_page.DeviceName.Low);
893 targ->encl_handle = le16toh(config_page.EnclosureHandle);
894 targ->encl_slot = le16toh(config_page.Slot);
895 targ->encl_level = config_page.EnclosureLevel;
896 targ->connector_name[0] = config_page.ConnectorName[0];
897 targ->connector_name[1] = config_page.ConnectorName[1];
898 targ->connector_name[2] = config_page.ConnectorName[2];
899 targ->connector_name[3] = config_page.ConnectorName[3];
900 targ->handle = handle;
901 targ->parent_handle = le16toh(config_page.ParentDevHandle);
902 targ->sasaddr = mpr_to_u64(&config_page.SASAddress);
903 targ->parent_sasaddr = le64toh(parent_sas_address);
904 targ->parent_devinfo = parent_devinfo;
906 targ->linkrate = (linkrate>>4);
909 targ->flags = MPR_TARGET_IS_SATA_SSD;
911 if ((le16toh(config_page.Flags) &
912 MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH) &&
913 (le16toh(config_page.Flags) &
914 MPI25_SAS_DEVICE0_FLAGS_FAST_PATH_CAPABLE)) {
915 targ->scsi_req_desc_type =
916 MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO;
918 if (le16toh(config_page.Flags) &
919 MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID) {
920 targ->encl_level_valid = TRUE;
922 TAILQ_INIT(&targ->commands);
923 TAILQ_INIT(&targ->timedout_commands);
924 while (!SLIST_EMPTY(&targ->luns)) {
925 lun = SLIST_FIRST(&targ->luns);
926 SLIST_REMOVE_HEAD(&targ->luns, lun_link);
929 SLIST_INIT(&targ->luns);
931 mpr_describe_devinfo(targ->devinfo, devstring, 80);
932 mpr_dprint(sc, (MPR_INFO|MPR_MAPPING), "Found device <%s> <%s> "
933 "handle<0x%04x> enclosureHandle<0x%04x> slot %d\n", devstring,
934 mpr_describe_table(mpr_linkrate_names, targ->linkrate),
935 targ->handle, targ->encl_handle, targ->encl_slot);
936 if (targ->encl_level_valid) {
937 mpr_dprint(sc, (MPR_INFO|MPR_MAPPING), "At enclosure level %d "
938 "and connector name (%4s)\n", targ->encl_level,
939 targ->connector_name);
941 #if ((__FreeBSD_version >= 1000000) && (__FreeBSD_version < 1000039)) || \
942 (__FreeBSD_version < 902502)
943 if ((sassc->flags & MPRSAS_IN_STARTUP) == 0)
945 mprsas_rescan_target(sc, targ);
946 mpr_dprint(sc, MPR_MAPPING, "Target id 0x%x added\n", targ->tid);
949 * Check all commands to see if the SATA_ID_TIMEOUT flag has been set.
950 * If so, send a Target Reset TM to the target that was just created.
951 * An Abort Task TM should be used instead of a Target Reset, but that
952 * would be much more difficult because targets have not been fully
953 * discovered yet, and LUN's haven't been setup. So, just reset the
954 * target instead of the LUN.
956 for (i = 1; i < sc->num_reqs; i++) {
957 cm = &sc->commands[i];
958 if (cm->cm_flags & MPR_CM_FLAGS_SATA_ID_TIMEOUT) {
960 cm->cm_state = MPR_CM_STATE_TIMEDOUT;
962 if ((targ->tm = mprsas_alloc_tm(sc)) != NULL) {
963 mpr_dprint(sc, MPR_INFO, "%s: sending Target "
964 "Reset for stuck SATA identify command "
965 "(cm = %p)\n", __func__, cm);
966 targ->tm->cm_targ = targ;
967 mprsas_send_reset(sc, targ->tm,
968 MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET);
970 mpr_dprint(sc, MPR_ERROR, "Failed to allocate "
971 "tm for Target Reset after SATA ID command "
972 "timed out (cm %p)\n", cm);
975 * No need to check for more since the target is
976 * already being reset.
983 * Free the commands that may not have been freed from the SATA ID call
985 for (i = 1; i < sc->num_reqs; i++) {
986 cm = &sc->commands[i];
987 if (cm->cm_flags & MPR_CM_FLAGS_SATA_ID_TIMEOUT) {
988 mpr_free_command(sc, cm);
991 mprsas_startup_decrement(sassc);
996 mprsas_get_sas_address_for_sata_disk(struct mpr_softc *sc,
997 u64 *sas_address, u16 handle, u32 device_info, u8 *is_SATA_SSD)
999 Mpi2SataPassthroughReply_t mpi_reply;
1000 int i, rc, try_count;
1002 union _sata_sas_address hash_address;
1003 struct _ata_identify_device_data ata_identify;
1004 u8 buffer[MPT2SAS_MN_LEN + MPT2SAS_SN_LEN];
1008 memset(&ata_identify, 0, sizeof(ata_identify));
1009 memset(&mpi_reply, 0, sizeof(mpi_reply));
1012 rc = mprsas_get_sata_identify(sc, handle, &mpi_reply,
1013 (char *)&ata_identify, sizeof(ata_identify), device_info);
1015 ioc_status = le16toh(mpi_reply.IOCStatus)
1016 & MPI2_IOCSTATUS_MASK;
1017 sas_status = mpi_reply.SASStatus;
1018 switch (ioc_status) {
1019 case MPI2_IOCSTATUS_SUCCESS:
1021 case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
1022 /* No sense sleeping. this error won't get better */
1025 if (sc->spinup_wait_time > 0) {
1026 mpr_dprint(sc, MPR_INFO, "Sleeping %d seconds "
1027 "after SATA ID error to wait for spinup\n",
1028 sc->spinup_wait_time);
1029 msleep(&sc->msleep_fake_chan, &sc->mpr_mtx, 0,
1030 "mprid", sc->spinup_wait_time * hz);
1033 } while (((rc && (rc != EWOULDBLOCK)) ||
1034 (ioc_status && (ioc_status != MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR))
1035 || sas_status) && (try_count < 5));
1037 if (rc == 0 && !ioc_status && !sas_status) {
1038 mpr_dprint(sc, MPR_MAPPING, "%s: got SATA identify "
1039 "successfully for handle = 0x%x with try_count = %d\n",
1040 __func__, handle, try_count);
1042 mpr_dprint(sc, MPR_MAPPING, "%s: handle = 0x%x failed\n",
1046 /* Copy & byteswap the 40 byte model number to a buffer */
1047 for (i = 0; i < MPT2SAS_MN_LEN; i += 2) {
1048 buffer[i] = ((u8 *)ata_identify.model_number)[i + 1];
1049 buffer[i + 1] = ((u8 *)ata_identify.model_number)[i];
1051 /* Copy & byteswap the 20 byte serial number to a buffer */
1052 for (i = 0; i < MPT2SAS_SN_LEN; i += 2) {
1053 buffer[MPT2SAS_MN_LEN + i] =
1054 ((u8 *)ata_identify.serial_number)[i + 1];
1055 buffer[MPT2SAS_MN_LEN + i + 1] =
1056 ((u8 *)ata_identify.serial_number)[i];
1058 bufferptr = (u32 *)buffer;
1059 /* There are 60 bytes to hash down to 8. 60 isn't divisible by 8,
1060 * so loop through the first 56 bytes (7*8),
1061 * and then add in the last dword.
1063 hash_address.word.low = 0;
1064 hash_address.word.high = 0;
1065 for (i = 0; (i < ((MPT2SAS_MN_LEN+MPT2SAS_SN_LEN)/8)); i++) {
1066 hash_address.word.low += *bufferptr;
1068 hash_address.word.high += *bufferptr;
1071 /* Add the last dword */
1072 hash_address.word.low += *bufferptr;
1073 /* Make sure the hash doesn't start with 5, because it could clash
1074 * with a SAS address. Change 5 to a D.
1076 if ((hash_address.word.high & 0x000000F0) == (0x00000050))
1077 hash_address.word.high |= 0x00000080;
1078 *sas_address = (u64)hash_address.wwid[0] << 56 |
1079 (u64)hash_address.wwid[1] << 48 | (u64)hash_address.wwid[2] << 40 |
1080 (u64)hash_address.wwid[3] << 32 | (u64)hash_address.wwid[4] << 24 |
1081 (u64)hash_address.wwid[5] << 16 | (u64)hash_address.wwid[6] << 8 |
1082 (u64)hash_address.wwid[7];
1083 if (ata_identify.rotational_speed == 1) {
1091 mprsas_get_sata_identify(struct mpr_softc *sc, u16 handle,
1092 Mpi2SataPassthroughReply_t *mpi_reply, char *id_buffer, int sz, u32 devinfo)
1094 Mpi2SataPassthroughRequest_t *mpi_request;
1095 Mpi2SataPassthroughReply_t *reply;
1096 struct mpr_command *cm;
1100 buffer = malloc( sz, M_MPR, M_NOWAIT | M_ZERO);
1104 if ((cm = mpr_alloc_command(sc)) == NULL) {
1105 free(buffer, M_MPR);
1108 mpi_request = (MPI2_SATA_PASSTHROUGH_REQUEST *)cm->cm_req;
1109 bzero(mpi_request,sizeof(MPI2_SATA_PASSTHROUGH_REQUEST));
1110 mpi_request->Function = MPI2_FUNCTION_SATA_PASSTHROUGH;
1111 mpi_request->VF_ID = 0;
1112 mpi_request->DevHandle = htole16(handle);
1113 mpi_request->PassthroughFlags = (MPI2_SATA_PT_REQ_PT_FLAGS_PIO |
1114 MPI2_SATA_PT_REQ_PT_FLAGS_READ);
1115 mpi_request->DataLength = htole32(sz);
1116 mpi_request->CommandFIS[0] = 0x27;
1117 mpi_request->CommandFIS[1] = 0x80;
1118 mpi_request->CommandFIS[2] = (devinfo &
1119 MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE) ? 0xA1 : 0xEC;
1120 cm->cm_sge = &mpi_request->SGL;
1121 cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION);
1122 cm->cm_flags = MPR_CM_FLAGS_DATAIN;
1123 cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
1124 cm->cm_data = buffer;
1125 cm->cm_length = htole32(sz);
1128 * Start a timeout counter specifically for the SATA ID command. This
1129 * is used to fix a problem where the FW does not send a reply sometimes
1130 * when a bad disk is in the topology. So, this is used to timeout the
1131 * command so that processing can continue normally.
1133 mpr_dprint(sc, MPR_XINFO, "%s start timeout counter for SATA ID "
1134 "command\n", __func__);
1135 callout_reset(&cm->cm_callout, MPR_ATA_ID_TIMEOUT * hz,
1136 mprsas_ata_id_timeout, cm);
1137 error = mpr_wait_command(sc, &cm, 60, CAN_SLEEP);
1138 mpr_dprint(sc, MPR_XINFO, "%s stop timeout counter for SATA ID "
1139 "command\n", __func__);
1140 /* XXX KDM need to fix the case where this command is destroyed */
1141 callout_stop(&cm->cm_callout);
1144 reply = (Mpi2SataPassthroughReply_t *)cm->cm_reply;
1145 if (error || (reply == NULL)) {
1148 * If the request returns an error then we need to do a diag
1151 printf("%s: request for page completed with error %d",
1156 bcopy(buffer, id_buffer, sz);
1157 bcopy(reply, mpi_reply, sizeof(Mpi2SataPassthroughReply_t));
1158 if ((le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK) !=
1159 MPI2_IOCSTATUS_SUCCESS) {
1160 printf("%s: error reading SATA PASSTHRU; iocstatus = 0x%x\n",
1161 __func__, reply->IOCStatus);
1167 * If the SATA_ID_TIMEOUT flag has been set for this command, don't free
1168 * it. The command will be freed after sending a target reset TM. If
1169 * the command did timeout, use EWOULDBLOCK.
1171 if ((cm->cm_flags & MPR_CM_FLAGS_SATA_ID_TIMEOUT) == 0)
1172 mpr_free_command(sc, cm);
1173 else if (error == 0)
1174 error = EWOULDBLOCK;
1176 free(buffer, M_MPR);
1181 mprsas_ata_id_timeout(void *data)
1183 struct mpr_softc *sc;
1184 struct mpr_command *cm;
1186 cm = (struct mpr_command *)data;
1188 mtx_assert(&sc->mpr_mtx, MA_OWNED);
1190 mpr_dprint(sc, MPR_INFO, "%s checking ATA ID command %p sc %p\n",
1192 if ((callout_pending(&cm->cm_callout)) ||
1193 (!callout_active(&cm->cm_callout))) {
1194 mpr_dprint(sc, MPR_INFO, "%s ATA ID command almost timed out\n",
1198 callout_deactivate(&cm->cm_callout);
1201 * Run the interrupt handler to make sure it's not pending. This
1202 * isn't perfect because the command could have already completed
1203 * and been re-used, though this is unlikely.
1205 mpr_intr_locked(sc);
1206 if (cm->cm_state == MPR_CM_STATE_FREE) {
1207 mpr_dprint(sc, MPR_INFO, "%s ATA ID command almost timed out\n",
1212 mpr_dprint(sc, MPR_INFO, "ATA ID command timeout cm %p\n", cm);
1215 * Send wakeup() to the sleeping thread that issued this ATA ID command.
1216 * wakeup() will cause msleep to return a 0 (not EWOULDBLOCK), and this
1217 * will keep reinit() from being called. This way, an Abort Task TM can
1218 * be issued so that the timed out command can be cleared. The Abort
1219 * Task cannot be sent from here because the driver has not completed
1220 * setting up targets. Instead, the command is flagged so that special
1221 * handling will be used to send the abort.
1223 cm->cm_flags |= MPR_CM_FLAGS_SATA_ID_TIMEOUT;
1228 mprsas_add_pcie_device(struct mpr_softc *sc, u16 handle, u8 linkrate)
1231 struct mprsas_softc *sassc;
1232 struct mprsas_target *targ;
1233 Mpi2ConfigReply_t mpi_reply;
1234 Mpi26PCIeDevicePage0_t config_page;
1235 Mpi26PCIeDevicePage2_t config_page2;
1236 uint64_t pcie_wwid, parent_wwid = 0;
1237 u32 device_info, parent_devinfo = 0;
1240 struct mprsas_lun *lun;
1243 mprsas_startup_increment(sassc);
1244 if ((mpr_config_get_pcie_device_pg0(sc, &mpi_reply, &config_page,
1245 MPI26_PCIE_DEVICE_PGAD_FORM_HANDLE, handle))) {
1246 printf("%s: error reading PCIe device page0\n", __func__);
1251 device_info = le32toh(config_page.DeviceInfo);
1253 if (((device_info & MPI26_PCIE_DEVINFO_PCI_SWITCH) == 0)
1254 && (le16toh(config_page.ParentDevHandle) != 0)) {
1255 Mpi2ConfigReply_t tmp_mpi_reply;
1256 Mpi26PCIeDevicePage0_t parent_config_page;
1258 if ((mpr_config_get_pcie_device_pg0(sc, &tmp_mpi_reply,
1259 &parent_config_page, MPI26_PCIE_DEVICE_PGAD_FORM_HANDLE,
1260 le16toh(config_page.ParentDevHandle)))) {
1261 printf("%s: error reading PCIe device %#x page0\n",
1262 __func__, le16toh(config_page.ParentDevHandle));
1264 parent_wwid = parent_config_page.WWID.High;
1265 parent_wwid = (parent_wwid << 32) |
1266 parent_config_page.WWID.Low;
1267 parent_devinfo = le32toh(parent_config_page.DeviceInfo);
1270 /* TODO Check proper endianness */
1271 pcie_wwid = config_page.WWID.High;
1272 pcie_wwid = (pcie_wwid << 32) | config_page.WWID.Low;
1273 mpr_dprint(sc, MPR_INFO, "PCIe WWID from PCIe device page0 = %jx\n",
1276 if ((mpr_config_get_pcie_device_pg2(sc, &mpi_reply, &config_page2,
1277 MPI26_PCIE_DEVICE_PGAD_FORM_HANDLE, handle))) {
1278 printf("%s: error reading PCIe device page2\n", __func__);
1283 id = mpr_mapping_get_tid(sc, pcie_wwid, handle);
1284 if (id == MPR_MAP_BAD_ID) {
1285 mpr_dprint(sc, MPR_ERROR | MPR_INFO, "failure at %s:%d/%s()! "
1286 "Could not get ID for device with handle 0x%04x\n",
1287 __FILE__, __LINE__, __func__, handle);
1291 mpr_dprint(sc, MPR_MAPPING, "%s: Target ID for added device is %d.\n",
1294 if (mprsas_check_id(sassc, id) != 0) {
1295 mpr_dprint(sc, MPR_MAPPING|MPR_INFO,
1296 "Excluding target id %d\n", id);
1301 mpr_dprint(sc, MPR_MAPPING, "WWID from PCIe device page0 = %jx\n",
1303 targ = &sassc->targets[id];
1304 targ->devinfo = device_info;
1305 targ->encl_handle = le16toh(config_page.EnclosureHandle);
1306 targ->encl_slot = le16toh(config_page.Slot);
1307 targ->encl_level = config_page.EnclosureLevel;
1308 targ->connector_name[0] = ((char *)&config_page.ConnectorName)[0];
1309 targ->connector_name[1] = ((char *)&config_page.ConnectorName)[1];
1310 targ->connector_name[2] = ((char *)&config_page.ConnectorName)[2];
1311 targ->connector_name[3] = ((char *)&config_page.ConnectorName)[3];
1312 targ->is_nvme = device_info & MPI26_PCIE_DEVINFO_NVME;
1313 targ->MDTS = config_page2.MaximumDataTransferSize;
1315 * Assume always TRUE for encl_level_valid because there is no valid
1318 targ->encl_level_valid = TRUE;
1319 targ->handle = handle;
1320 targ->parent_handle = le16toh(config_page.ParentDevHandle);
1321 targ->sasaddr = mpr_to_u64(&config_page.WWID);
1322 targ->parent_sasaddr = le64toh(parent_wwid);
1323 targ->parent_devinfo = parent_devinfo;
1325 targ->linkrate = linkrate;
1327 if ((le16toh(config_page.Flags) &
1328 MPI26_PCIEDEV0_FLAGS_ENABLED_FAST_PATH) &&
1329 (le16toh(config_page.Flags) &
1330 MPI26_PCIEDEV0_FLAGS_FAST_PATH_CAPABLE)) {
1331 targ->scsi_req_desc_type =
1332 MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO;
1334 TAILQ_INIT(&targ->commands);
1335 TAILQ_INIT(&targ->timedout_commands);
1336 while (!SLIST_EMPTY(&targ->luns)) {
1337 lun = SLIST_FIRST(&targ->luns);
1338 SLIST_REMOVE_HEAD(&targ->luns, lun_link);
1341 SLIST_INIT(&targ->luns);
1343 mpr_describe_devinfo(targ->devinfo, devstring, 80);
1344 mpr_dprint(sc, (MPR_INFO|MPR_MAPPING), "Found PCIe device <%s> <%s> "
1345 "handle<0x%04x> enclosureHandle<0x%04x> slot %d\n", devstring,
1346 mpr_describe_table(mpr_pcie_linkrate_names, targ->linkrate),
1347 targ->handle, targ->encl_handle, targ->encl_slot);
1348 if (targ->encl_level_valid) {
1349 mpr_dprint(sc, (MPR_INFO|MPR_MAPPING), "At enclosure level %d "
1350 "and connector name (%4s)\n", targ->encl_level,
1351 targ->connector_name);
1353 #if ((__FreeBSD_version >= 1000000) && (__FreeBSD_version < 1000039)) || \
1354 (__FreeBSD_version < 902502)
1355 if ((sassc->flags & MPRSAS_IN_STARTUP) == 0)
1357 mprsas_rescan_target(sc, targ);
1358 mpr_dprint(sc, MPR_MAPPING, "Target id 0x%x added\n", targ->tid);
1361 mprsas_startup_decrement(sassc);
1366 mprsas_volume_add(struct mpr_softc *sc, u16 handle)
1368 struct mprsas_softc *sassc;
1369 struct mprsas_target *targ;
1373 struct mprsas_lun *lun;
1376 mprsas_startup_increment(sassc);
1377 /* wwid is endian safe */
1378 mpr_config_get_volume_wwid(sc, handle, &wwid);
1380 printf("%s: invalid WWID; cannot add volume to mapping table\n",
1386 id = mpr_mapping_get_raid_tid(sc, wwid, handle);
1387 if (id == MPR_MAP_BAD_ID) {
1388 printf("%s: could not get ID for volume with handle 0x%04x and "
1389 "WWID 0x%016llx\n", __func__, handle,
1390 (unsigned long long)wwid);
1395 targ = &sassc->targets[id];
1397 targ->handle = handle;
1398 targ->devname = wwid;
1399 TAILQ_INIT(&targ->commands);
1400 TAILQ_INIT(&targ->timedout_commands);
1401 while (!SLIST_EMPTY(&targ->luns)) {
1402 lun = SLIST_FIRST(&targ->luns);
1403 SLIST_REMOVE_HEAD(&targ->luns, lun_link);
1406 SLIST_INIT(&targ->luns);
1407 #if ((__FreeBSD_version >= 1000000) && (__FreeBSD_version < 1000039)) || \
1408 (__FreeBSD_version < 902502)
1409 if ((sassc->flags & MPRSAS_IN_STARTUP) == 0)
1411 mprsas_rescan_target(sc, targ);
1412 mpr_dprint(sc, MPR_MAPPING, "RAID target id %d added (WWID = 0x%jx)\n",
1415 mprsas_startup_decrement(sassc);
1420 * mprsas_SSU_to_SATA_devices
1421 * @sc: per adapter object
1423 * Looks through the target list and issues a StartStopUnit SCSI command to each
1424 * SATA direct-access device. This helps to ensure that data corruption is
1425 * avoided when the system is being shut down. This must be called after the IR
1426 * System Shutdown RAID Action is sent if in IR mode.
1431 mprsas_SSU_to_SATA_devices(struct mpr_softc *sc)
1433 struct mprsas_softc *sassc = sc->sassc;
1435 path_id_t pathid = cam_sim_path(sassc->sim);
1436 target_id_t targetid;
1437 struct mprsas_target *target;
1439 struct timeval cur_time, start_time;
1444 * For each target, issue a StartStopUnit command to stop the device.
1446 sc->SSU_started = TRUE;
1447 sc->SSU_refcount = 0;
1448 for (targetid = 0; targetid < sc->max_devices; targetid++) {
1449 target = &sassc->targets[targetid];
1450 if (target->handle == 0x0) {
1455 * The stop_at_shutdown flag will be set if this device is
1456 * a SATA direct-access end device.
1458 if (target->stop_at_shutdown) {
1459 ccb = xpt_alloc_ccb_nowait();
1461 mpr_dprint(sc, MPR_FAULT, "Unable to alloc CCB "
1466 if (xpt_create_path(&ccb->ccb_h.path, xpt_periph,
1467 pathid, targetid, CAM_LUN_WILDCARD) !=
1469 mpr_dprint(sc, MPR_ERROR, "Unable to create "
1470 "path to stop unit.\n");
1474 xpt_path_string(ccb->ccb_h.path, path_str,
1477 mpr_dprint(sc, MPR_INFO, "Sending StopUnit: path %s "
1478 "handle %d\n", path_str, target->handle);
1481 * Issue a START STOP UNIT command for the target.
1482 * Increment the SSU counter to be used to count the
1483 * number of required replies.
1485 mpr_dprint(sc, MPR_INFO, "Incrementing SSU count\n");
1487 ccb->ccb_h.target_id =
1488 xpt_path_target_id(ccb->ccb_h.path);
1489 ccb->ccb_h.ppriv_ptr1 = sassc;
1490 scsi_start_stop(&ccb->csio,
1492 mprsas_stop_unit_done,
1506 * Wait until all of the SSU commands have completed or time has
1507 * expired (60 seconds). Pause for 100ms each time through. If any
1508 * command times out, the target will be reset in the SCSI command
1511 getmicrotime(&start_time);
1512 while (sc->SSU_refcount) {
1513 pause("mprwait", hz/10);
1515 getmicrotime(&cur_time);
1516 if ((cur_time.tv_sec - start_time.tv_sec) > 60) {
1517 mpr_dprint(sc, MPR_ERROR, "Time has expired waiting "
1518 "for SSU commands to complete.\n");
1525 mprsas_stop_unit_done(struct cam_periph *periph, union ccb *done_ccb)
1527 struct mprsas_softc *sassc;
1530 if (done_ccb == NULL)
1533 sassc = (struct mprsas_softc *)done_ccb->ccb_h.ppriv_ptr1;
1535 xpt_path_string(done_ccb->ccb_h.path, path_str, sizeof(path_str));
1536 mpr_dprint(sassc->sc, MPR_INFO, "Completing stop unit for %s\n",
1540 * Nothing more to do except free the CCB and path. If the command
1541 * timed out, an abort reset, then target reset will be issued during
1542 * the SCSI Command process.
1544 xpt_free_path(done_ccb->ccb_h.path);
1545 xpt_free_ccb(done_ccb);
1549 * mprsas_ir_shutdown - IR shutdown notification
1550 * @sc: per adapter object
1552 * Sending RAID Action to alert the Integrated RAID subsystem of the IOC that
1553 * the host system is shutting down.
1558 mprsas_ir_shutdown(struct mpr_softc *sc)
1560 u16 volume_mapping_flags;
1561 u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
1562 struct dev_mapping_table *mt_entry;
1563 u32 start_idx, end_idx;
1564 unsigned int id, found_volume = 0;
1565 struct mpr_command *cm;
1566 Mpi2RaidActionRequest_t *action;
1567 target_id_t targetid;
1568 struct mprsas_target *target;
1570 mpr_dprint(sc, MPR_TRACE, "%s\n", __func__);
1572 /* is IR firmware build loaded? */
1573 if (!sc->ir_firmware)
1576 /* are there any volumes? Look at IR target IDs. */
1577 // TODO-later, this should be looked up in the RAID config structure
1578 // when it is implemented.
1579 volume_mapping_flags = le16toh(sc->ioc_pg8.IRVolumeMappingFlags) &
1580 MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
1581 if (volume_mapping_flags == MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING) {
1583 if (ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0)
1586 start_idx = sc->max_devices - sc->max_volumes;
1587 end_idx = start_idx + sc->max_volumes - 1;
1589 for (id = start_idx; id < end_idx; id++) {
1590 mt_entry = &sc->mapping_table[id];
1591 if ((mt_entry->physical_id != 0) &&
1592 (mt_entry->missing_count == 0)) {
1601 if ((cm = mpr_alloc_command(sc)) == NULL) {
1602 printf("%s: command alloc failed\n", __func__);
1606 action = (MPI2_RAID_ACTION_REQUEST *)cm->cm_req;
1607 action->Function = MPI2_FUNCTION_RAID_ACTION;
1608 action->Action = MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED;
1609 cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
1611 mpr_wait_command(sc, &cm, 5, CAN_SLEEP);
1615 * Don't check for reply, just leave.
1618 mpr_free_command(sc, cm);
1622 * All of the targets must have the correct value set for
1623 * 'stop_at_shutdown' for the current 'enable_ssu' sysctl variable.
1625 * The possible values for the 'enable_ssu' variable are:
1626 * 0: disable to SSD and HDD
1627 * 1: disable only to HDD (default)
1628 * 2: disable only to SSD
1629 * 3: enable to SSD and HDD
1630 * anything else will default to 1.
1632 for (targetid = 0; targetid < sc->max_devices; targetid++) {
1633 target = &sc->sassc->targets[targetid];
1634 if (target->handle == 0x0) {
1638 if (target->supports_SSU) {
1639 switch (sc->enable_ssu) {
1640 case MPR_SSU_DISABLE_SSD_DISABLE_HDD:
1641 target->stop_at_shutdown = FALSE;
1643 case MPR_SSU_DISABLE_SSD_ENABLE_HDD:
1644 target->stop_at_shutdown = TRUE;
1645 if (target->flags & MPR_TARGET_IS_SATA_SSD) {
1646 target->stop_at_shutdown = FALSE;
1649 case MPR_SSU_ENABLE_SSD_ENABLE_HDD:
1650 target->stop_at_shutdown = TRUE;
1652 case MPR_SSU_ENABLE_SSD_DISABLE_HDD:
1654 target->stop_at_shutdown = TRUE;
1655 if ((target->flags &
1656 MPR_TARGET_IS_SATA_SSD) == 0) {
1657 target->stop_at_shutdown = FALSE;
1663 mprsas_SSU_to_SATA_devices(sc);