2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
4 * Copyright (c) 2006-2015 LSI Corp.
5 * Copyright (c) 2013-2015 Avago Technologies
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
29 * Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD
35 * Copyright (c) 2006-2015 LSI Corporation.
36 * Copyright (c) 2013-2015 Avago Technologies
40 * Title: MPI SCSI initiator mode messages and structures
41 * Creation Date: June 23, 2006
43 * mpi2_init.h Version: 02.00.11
48 * Date Version Description
49 * -------- -------- ------------------------------------------------------
50 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
51 * 10-31-07 02.00.01 Fixed name for pMpi2SCSITaskManagementRequest_t.
52 * 12-18-07 02.00.02 Modified Task Management Target Reset Method defines.
53 * 02-29-08 02.00.03 Added Query Task Set and Query Unit Attention.
54 * 03-03-08 02.00.04 Fixed name of struct _MPI2_SCSI_TASK_MANAGE_REPLY.
55 * 05-21-08 02.00.05 Fixed typo in name of Mpi2SepRequest_t.
56 * 10-02-08 02.00.06 Removed Untagged and No Disconnect values from SCSI IO
57 * Control field Task Attribute flags.
58 * Moved LUN field defines to mpi2.h because they are
59 * common to many structures.
60 * 05-06-09 02.00.07 Changed task management type of Query Unit Attention to
61 * Query Asynchronous Event.
62 * Defined two new bits in the SlotStatus field of the SCSI
63 * Enclosure Processor Request and Reply.
64 * 10-28-09 02.00.08 Added defines for decoding the ResponseInfo bytes for
65 * both SCSI IO Error Reply and SCSI Task Management Reply.
66 * Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY.
67 * Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define.
68 * 02-10-10 02.00.09 Removed unused structure that had "#if 0" around it.
69 * 05-12-10 02.00.10 Added optional vendor-unique region to SCSI IO Request.
70 * 11-10-10 02.00.11 Added MPI2_SCSIIO_NUM_SGLOFFSETS define.
71 * --------------------------------------------------------------------------
77 /*****************************************************************************
79 * SCSI Initiator Messages
81 *****************************************************************************/
83 /****************************************************************************
84 * SCSI IO messages and associated structures
85 ****************************************************************************/
89 U8 CDB[20]; /* 0x00 */
90 U32 PrimaryReferenceTag; /* 0x14 */
91 U16 PrimaryApplicationTag; /* 0x18 */
92 U16 PrimaryApplicationTagMask; /* 0x1A */
93 U32 TransferLength; /* 0x1C */
94 } MPI2_SCSI_IO_CDB_EEDP32, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_EEDP32,
95 Mpi2ScsiIoCdbEedp32_t, MPI2_POINTER pMpi2ScsiIoCdbEedp32_t;
100 MPI2_SCSI_IO_CDB_EEDP32 EEDP32;
101 MPI2_SGE_SIMPLE_UNION SGE;
102 } MPI2_SCSI_IO_CDB_UNION, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_UNION,
103 Mpi2ScsiIoCdb_t, MPI2_POINTER pMpi2ScsiIoCdb_t;
105 /* SCSI IO Request Message */
106 typedef struct _MPI2_SCSI_IO_REQUEST
108 U16 DevHandle; /* 0x00 */
109 U8 ChainOffset; /* 0x02 */
110 U8 Function; /* 0x03 */
111 U16 Reserved1; /* 0x04 */
112 U8 Reserved2; /* 0x06 */
113 U8 MsgFlags; /* 0x07 */
116 U16 Reserved3; /* 0x0A */
117 U32 SenseBufferLowAddress; /* 0x0C */
118 U16 SGLFlags; /* 0x10 */
119 U8 SenseBufferLength; /* 0x12 */
120 U8 Reserved4; /* 0x13 */
121 U8 SGLOffset0; /* 0x14 */
122 U8 SGLOffset1; /* 0x15 */
123 U8 SGLOffset2; /* 0x16 */
124 U8 SGLOffset3; /* 0x17 */
125 U32 SkipCount; /* 0x18 */
126 U32 DataLength; /* 0x1C */
127 U32 BidirectionalDataLength; /* 0x20 */
128 U16 IoFlags; /* 0x24 */
129 U16 EEDPFlags; /* 0x26 */
130 U32 EEDPBlockSize; /* 0x28 */
131 U32 SecondaryReferenceTag; /* 0x2C */
132 U16 SecondaryApplicationTag; /* 0x30 */
133 U16 ApplicationTagTranslationMask; /* 0x32 */
134 U8 LUN[8]; /* 0x34 */
135 U32 Control; /* 0x3C */
136 MPI2_SCSI_IO_CDB_UNION CDB; /* 0x40 */
138 #ifdef MPI2_SCSI_IO_VENDOR_UNIQUE_REGION /* typically this is left undefined */
139 MPI2_SCSI_IO_VENDOR_UNIQUE VendorRegion;
142 MPI2_SGE_IO_UNION SGL; /* 0x60 */
144 } MPI2_SCSI_IO_REQUEST, MPI2_POINTER PTR_MPI2_SCSI_IO_REQUEST,
145 Mpi2SCSIIORequest_t, MPI2_POINTER pMpi2SCSIIORequest_t;
147 /* SCSI IO MsgFlags bits */
149 /* MsgFlags for SenseBufferAddressSpace */
150 #define MPI2_SCSIIO_MSGFLAGS_MASK_SENSE_ADDR (0x0C)
151 #define MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR (0x00)
152 #define MPI2_SCSIIO_MSGFLAGS_IOCDDR_SENSE_ADDR (0x04)
153 #define MPI2_SCSIIO_MSGFLAGS_IOCPLB_SENSE_ADDR (0x08)
154 #define MPI2_SCSIIO_MSGFLAGS_IOCPLBNTA_SENSE_ADDR (0x0C)
156 /* SCSI IO SGLFlags bits */
158 /* base values for Data Location Address Space */
159 #define MPI2_SCSIIO_SGLFLAGS_ADDR_MASK (0x0C)
160 #define MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR (0x00)
161 #define MPI2_SCSIIO_SGLFLAGS_IOCDDR_ADDR (0x04)
162 #define MPI2_SCSIIO_SGLFLAGS_IOCPLB_ADDR (0x08)
163 #define MPI2_SCSIIO_SGLFLAGS_IOCPLBNTA_ADDR (0x0C)
165 /* base values for Type */
166 #define MPI2_SCSIIO_SGLFLAGS_TYPE_MASK (0x03)
167 #define MPI2_SCSIIO_SGLFLAGS_TYPE_MPI (0x00)
168 #define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE32 (0x01)
169 #define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE64 (0x02)
171 /* shift values for each sub-field */
172 #define MPI2_SCSIIO_SGLFLAGS_SGL3_SHIFT (12)
173 #define MPI2_SCSIIO_SGLFLAGS_SGL2_SHIFT (8)
174 #define MPI2_SCSIIO_SGLFLAGS_SGL1_SHIFT (4)
175 #define MPI2_SCSIIO_SGLFLAGS_SGL0_SHIFT (0)
177 /* number of SGLOffset fields */
178 #define MPI2_SCSIIO_NUM_SGLOFFSETS (4)
180 /* SCSI IO IoFlags bits */
182 /* Large CDB Address Space */
183 #define MPI2_SCSIIO_CDB_ADDR_MASK (0x6000)
184 #define MPI2_SCSIIO_CDB_ADDR_SYSTEM (0x0000)
185 #define MPI2_SCSIIO_CDB_ADDR_IOCDDR (0x2000)
186 #define MPI2_SCSIIO_CDB_ADDR_IOCPLB (0x4000)
187 #define MPI2_SCSIIO_CDB_ADDR_IOCPLBNTA (0x6000)
189 #define MPI2_SCSIIO_IOFLAGS_LARGE_CDB (0x1000)
190 #define MPI2_SCSIIO_IOFLAGS_BIDIRECTIONAL (0x0800)
191 #define MPI2_SCSIIO_IOFLAGS_MULTICAST (0x0400)
192 #define MPI2_SCSIIO_IOFLAGS_CMD_DETERMINES_DATA_DIR (0x0200)
193 #define MPI2_SCSIIO_IOFLAGS_CDBLENGTH_MASK (0x01FF)
195 /* SCSI IO EEDPFlags bits */
197 #define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG (0x8000)
198 #define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_REFTAG (0x4000)
199 #define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_APPTAG (0x2000)
200 #define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_APPTAG (0x1000)
202 #define MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG (0x0400)
203 #define MPI2_SCSIIO_EEDPFLAGS_CHECK_APPTAG (0x0200)
204 #define MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD (0x0100)
206 #define MPI2_SCSIIO_EEDPFLAGS_PASSTHRU_REFTAG (0x0008)
208 #define MPI2_SCSIIO_EEDPFLAGS_MASK_OP (0x0007)
209 #define MPI2_SCSIIO_EEDPFLAGS_NOOP_OP (0x0000)
210 #define MPI2_SCSIIO_EEDPFLAGS_CHECK_OP (0x0001)
211 #define MPI2_SCSIIO_EEDPFLAGS_STRIP_OP (0x0002)
212 #define MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP (0x0003)
213 #define MPI2_SCSIIO_EEDPFLAGS_INSERT_OP (0x0004)
214 #define MPI2_SCSIIO_EEDPFLAGS_REPLACE_OP (0x0006)
215 #define MPI2_SCSIIO_EEDPFLAGS_CHECK_REGEN_OP (0x0007)
217 /* SCSI IO LUN fields: use MPI2_LUN_ from mpi2.h */
219 /* SCSI IO Control bits */
220 #define MPI2_SCSIIO_CONTROL_ADDCDBLEN_MASK (0xFC000000)
221 #define MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT (26)
223 #define MPI2_SCSIIO_CONTROL_DATADIRECTION_MASK (0x03000000)
224 #define MPI2_SCSIIO_CONTROL_NODATATRANSFER (0x00000000)
225 #define MPI2_SCSIIO_CONTROL_WRITE (0x01000000)
226 #define MPI2_SCSIIO_CONTROL_READ (0x02000000)
227 #define MPI2_SCSIIO_CONTROL_BIDIRECTIONAL (0x03000000)
229 #define MPI2_SCSIIO_CONTROL_TASKPRI_MASK (0x00007800)
230 #define MPI2_SCSIIO_CONTROL_TASKPRI_SHIFT (11)
232 #define MPI2_SCSIIO_CONTROL_TASKATTRIBUTE_MASK (0x00000700)
233 #define MPI2_SCSIIO_CONTROL_SIMPLEQ (0x00000000)
234 #define MPI2_SCSIIO_CONTROL_HEADOFQ (0x00000100)
235 #define MPI2_SCSIIO_CONTROL_ORDEREDQ (0x00000200)
236 #define MPI2_SCSIIO_CONTROL_ACAQ (0x00000400)
238 #define MPI2_SCSIIO_CONTROL_TLR_MASK (0x000000C0)
239 #define MPI2_SCSIIO_CONTROL_NO_TLR (0x00000000)
240 #define MPI2_SCSIIO_CONTROL_TLR_ON (0x00000040)
241 #define MPI2_SCSIIO_CONTROL_TLR_OFF (0x00000080)
243 /* SCSI IO Error Reply Message */
244 typedef struct _MPI2_SCSI_IO_REPLY
246 U16 DevHandle; /* 0x00 */
247 U8 MsgLength; /* 0x02 */
248 U8 Function; /* 0x03 */
249 U16 Reserved1; /* 0x04 */
250 U8 Reserved2; /* 0x06 */
251 U8 MsgFlags; /* 0x07 */
254 U16 Reserved3; /* 0x0A */
255 U8 SCSIStatus; /* 0x0C */
256 U8 SCSIState; /* 0x0D */
257 U16 IOCStatus; /* 0x0E */
258 U32 IOCLogInfo; /* 0x10 */
259 U32 TransferCount; /* 0x14 */
260 U32 SenseCount; /* 0x18 */
261 U32 ResponseInfo; /* 0x1C */
262 U16 TaskTag; /* 0x20 */
263 U16 Reserved4; /* 0x22 */
264 U32 BidirectionalTransferCount; /* 0x24 */
265 U32 Reserved5; /* 0x28 */
266 U32 Reserved6; /* 0x2C */
267 } MPI2_SCSI_IO_REPLY, MPI2_POINTER PTR_MPI2_SCSI_IO_REPLY,
268 Mpi2SCSIIOReply_t, MPI2_POINTER pMpi2SCSIIOReply_t;
270 /* SCSI IO Reply SCSIStatus values (SAM-4 status codes) */
272 #define MPI2_SCSI_STATUS_GOOD (0x00)
273 #define MPI2_SCSI_STATUS_CHECK_CONDITION (0x02)
274 #define MPI2_SCSI_STATUS_CONDITION_MET (0x04)
275 #define MPI2_SCSI_STATUS_BUSY (0x08)
276 #define MPI2_SCSI_STATUS_INTERMEDIATE (0x10)
277 #define MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET (0x14)
278 #define MPI2_SCSI_STATUS_RESERVATION_CONFLICT (0x18)
279 #define MPI2_SCSI_STATUS_COMMAND_TERMINATED (0x22) /* obsolete */
280 #define MPI2_SCSI_STATUS_TASK_SET_FULL (0x28)
281 #define MPI2_SCSI_STATUS_ACA_ACTIVE (0x30)
282 #define MPI2_SCSI_STATUS_TASK_ABORTED (0x40)
284 /* SCSI IO Reply SCSIState flags */
286 #define MPI2_SCSI_STATE_RESPONSE_INFO_VALID (0x10)
287 #define MPI2_SCSI_STATE_TERMINATED (0x08)
288 #define MPI2_SCSI_STATE_NO_SCSI_STATUS (0x04)
289 #define MPI2_SCSI_STATE_AUTOSENSE_FAILED (0x02)
290 #define MPI2_SCSI_STATE_AUTOSENSE_VALID (0x01)
292 /* masks and shifts for the ResponseInfo field */
294 #define MPI2_SCSI_RI_MASK_REASONCODE (0x000000FF)
295 #define MPI2_SCSI_RI_SHIFT_REASONCODE (0)
297 #define MPI2_SCSI_TASKTAG_UNKNOWN (0xFFFF)
299 /****************************************************************************
300 * SCSI Task Management messages
301 ****************************************************************************/
303 /* SCSI Task Management Request Message */
304 typedef struct _MPI2_SCSI_TASK_MANAGE_REQUEST
306 U16 DevHandle; /* 0x00 */
307 U8 ChainOffset; /* 0x02 */
308 U8 Function; /* 0x03 */
309 U8 Reserved1; /* 0x04 */
310 U8 TaskType; /* 0x05 */
311 U8 Reserved2; /* 0x06 */
312 U8 MsgFlags; /* 0x07 */
315 U16 Reserved3; /* 0x0A */
316 U8 LUN[8]; /* 0x0C */
317 U32 Reserved4[7]; /* 0x14 */
318 U16 TaskMID; /* 0x30 */
319 U16 Reserved5; /* 0x32 */
320 } MPI2_SCSI_TASK_MANAGE_REQUEST,
321 MPI2_POINTER PTR_MPI2_SCSI_TASK_MANAGE_REQUEST,
322 Mpi2SCSITaskManagementRequest_t,
323 MPI2_POINTER pMpi2SCSITaskManagementRequest_t;
325 /* TaskType values */
327 #define MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK (0x01)
328 #define MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET (0x02)
329 #define MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET (0x03)
330 #define MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05)
331 #define MPI2_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06)
332 #define MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07)
333 #define MPI2_SCSITASKMGMT_TASKTYPE_CLR_ACA (0x08)
334 #define MPI2_SCSITASKMGMT_TASKTYPE_QRY_TASK_SET (0x09)
335 #define MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT (0x0A)
337 /* obsolete TaskType name */
338 #define MPI2_SCSITASKMGMT_TASKTYPE_QRY_UNIT_ATTENTION (MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT)
342 #define MPI2_SCSITASKMGMT_MSGFLAGS_MASK_TARGET_RESET (0x18)
343 #define MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET (0x00)
344 #define MPI2_SCSITASKMGMT_MSGFLAGS_NEXUS_RESET_SRST (0x08)
345 #define MPI2_SCSITASKMGMT_MSGFLAGS_SAS_HARD_LINK_RESET (0x10)
347 #define MPI2_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x01)
349 /* SCSI Task Management Reply Message */
350 typedef struct _MPI2_SCSI_TASK_MANAGE_REPLY
352 U16 DevHandle; /* 0x00 */
353 U8 MsgLength; /* 0x02 */
354 U8 Function; /* 0x03 */
355 U8 ResponseCode; /* 0x04 */
356 U8 TaskType; /* 0x05 */
357 U8 Reserved1; /* 0x06 */
358 U8 MsgFlags; /* 0x07 */
361 U16 Reserved2; /* 0x0A */
362 U16 Reserved3; /* 0x0C */
363 U16 IOCStatus; /* 0x0E */
364 U32 IOCLogInfo; /* 0x10 */
365 U32 TerminationCount; /* 0x14 */
366 U32 ResponseInfo; /* 0x18 */
367 } MPI2_SCSI_TASK_MANAGE_REPLY,
368 MPI2_POINTER PTR_MPI2_SCSI_TASK_MANAGE_REPLY,
369 Mpi2SCSITaskManagementReply_t, MPI2_POINTER pMpi2SCSIManagementReply_t;
371 /* ResponseCode values */
373 #define MPI2_SCSITASKMGMT_RSP_TM_COMPLETE (0x00)
374 #define MPI2_SCSITASKMGMT_RSP_INVALID_FRAME (0x02)
375 #define MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED (0x04)
376 #define MPI2_SCSITASKMGMT_RSP_TM_FAILED (0x05)
377 #define MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED (0x08)
378 #define MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN (0x09)
379 #define MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG (0x0A)
380 #define MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC (0x80)
382 /* masks and shifts for the ResponseInfo field */
384 #define MPI2_SCSITASKMGMT_RI_MASK_REASONCODE (0x000000FF)
385 #define MPI2_SCSITASKMGMT_RI_SHIFT_REASONCODE (0)
386 #define MPI2_SCSITASKMGMT_RI_MASK_ARI2 (0x0000FF00)
387 #define MPI2_SCSITASKMGMT_RI_SHIFT_ARI2 (8)
388 #define MPI2_SCSITASKMGMT_RI_MASK_ARI1 (0x00FF0000)
389 #define MPI2_SCSITASKMGMT_RI_SHIFT_ARI1 (16)
390 #define MPI2_SCSITASKMGMT_RI_MASK_ARI0 (0xFF000000)
391 #define MPI2_SCSITASKMGMT_RI_SHIFT_ARI0 (24)
393 /****************************************************************************
394 * SCSI Enclosure Processor messages
395 ****************************************************************************/
397 /* SCSI Enclosure Processor Request Message */
398 typedef struct _MPI2_SEP_REQUEST
400 U16 DevHandle; /* 0x00 */
401 U8 ChainOffset; /* 0x02 */
402 U8 Function; /* 0x03 */
403 U8 Action; /* 0x04 */
405 U8 Reserved1; /* 0x06 */
406 U8 MsgFlags; /* 0x07 */
409 U16 Reserved2; /* 0x0A */
410 U32 SlotStatus; /* 0x0C */
411 U32 Reserved3; /* 0x10 */
412 U32 Reserved4; /* 0x14 */
413 U32 Reserved5; /* 0x18 */
415 U16 EnclosureHandle; /* 0x1E */
416 } MPI2_SEP_REQUEST, MPI2_POINTER PTR_MPI2_SEP_REQUEST,
417 Mpi2SepRequest_t, MPI2_POINTER pMpi2SepRequest_t;
420 #define MPI2_SEP_REQ_ACTION_WRITE_STATUS (0x00)
421 #define MPI2_SEP_REQ_ACTION_READ_STATUS (0x01)
424 #define MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS (0x00)
425 #define MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS (0x01)
427 /* SlotStatus defines */
428 #define MPI2_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE (0x00040000)
429 #define MPI2_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000)
430 #define MPI2_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED (0x00000200)
431 #define MPI2_SEP_REQ_SLOTSTATUS_HOT_SPARE (0x00000100)
432 #define MPI2_SEP_REQ_SLOTSTATUS_UNCONFIGURED (0x00000080)
433 #define MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT (0x00000040)
434 #define MPI2_SEP_REQ_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010)
435 #define MPI2_SEP_REQ_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008)
436 #define MPI2_SEP_REQ_SLOTSTATUS_DEV_REBUILDING (0x00000004)
437 #define MPI2_SEP_REQ_SLOTSTATUS_DEV_FAULTY (0x00000002)
438 #define MPI2_SEP_REQ_SLOTSTATUS_NO_ERROR (0x00000001)
440 /* SCSI Enclosure Processor Reply Message */
441 typedef struct _MPI2_SEP_REPLY
443 U16 DevHandle; /* 0x00 */
444 U8 MsgLength; /* 0x02 */
445 U8 Function; /* 0x03 */
446 U8 Action; /* 0x04 */
448 U8 Reserved1; /* 0x06 */
449 U8 MsgFlags; /* 0x07 */
452 U16 Reserved2; /* 0x0A */
453 U16 Reserved3; /* 0x0C */
454 U16 IOCStatus; /* 0x0E */
455 U32 IOCLogInfo; /* 0x10 */
456 U32 SlotStatus; /* 0x14 */
457 U32 Reserved4; /* 0x18 */
459 U16 EnclosureHandle; /* 0x1E */
460 } MPI2_SEP_REPLY, MPI2_POINTER PTR_MPI2_SEP_REPLY,
461 Mpi2SepReply_t, MPI2_POINTER pMpi2SepReply_t;
463 /* SlotStatus defines */
464 #define MPI2_SEP_REPLY_SLOTSTATUS_REMOVE_READY (0x00040000)
465 #define MPI2_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000)
466 #define MPI2_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED (0x00000200)
467 #define MPI2_SEP_REPLY_SLOTSTATUS_HOT_SPARE (0x00000100)
468 #define MPI2_SEP_REPLY_SLOTSTATUS_UNCONFIGURED (0x00000080)
469 #define MPI2_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT (0x00000040)
470 #define MPI2_SEP_REPLY_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010)
471 #define MPI2_SEP_REPLY_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008)
472 #define MPI2_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING (0x00000004)
473 #define MPI2_SEP_REPLY_SLOTSTATUS_DEV_FAULTY (0x00000002)
474 #define MPI2_SEP_REPLY_SLOTSTATUS_NO_ERROR (0x00000001)