2 * Copyright (c) 2008 Yahoo!, Inc.
4 * Written by: John Baldwin <jhb@FreeBSD.org>
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * 3. Neither the name of the author nor the names of any co-contributors
15 * may be used to endorse or promote products derived from this software
16 * without specific prior written permission.
18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30 * Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD userland interface
33 * Copyright (c) 2011-2015 LSI Corp.
34 * Copyright (c) 2013-2015 Avago Technologies
35 * All rights reserved.
37 * Redistribution and use in source and binary forms, with or without
38 * modification, are permitted provided that the following conditions
40 * 1. Redistributions of source code must retain the above copyright
41 * notice, this list of conditions and the following disclaimer.
42 * 2. Redistributions in binary form must reproduce the above copyright
43 * notice, this list of conditions and the following disclaimer in the
44 * documentation and/or other materials provided with the distribution.
46 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
47 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
48 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
49 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
50 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
51 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
52 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
53 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
54 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
55 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
58 * Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD
63 #include <sys/cdefs.h>
64 __FBSDID("$FreeBSD$");
66 #include "opt_compat.h"
68 /* TODO Move headers to mpsvar */
69 #include <sys/types.h>
70 #include <sys/param.h>
71 #include <sys/systm.h>
72 #include <sys/kernel.h>
73 #include <sys/selinfo.h>
74 #include <sys/module.h>
78 #include <sys/malloc.h>
80 #include <sys/sysctl.h>
81 #include <sys/ioccom.h>
82 #include <sys/endian.h>
83 #include <sys/queue.h>
84 #include <sys/kthread.h>
85 #include <sys/taskqueue.h>
87 #include <sys/sysent.h>
89 #include <machine/bus.h>
90 #include <machine/resource.h>
94 #include <cam/cam_ccb.h>
95 #include <cam/scsi/scsi_all.h>
97 #include <dev/mps/mpi/mpi2_type.h>
98 #include <dev/mps/mpi/mpi2.h>
99 #include <dev/mps/mpi/mpi2_ioc.h>
100 #include <dev/mps/mpi/mpi2_cnfg.h>
101 #include <dev/mps/mpi/mpi2_init.h>
102 #include <dev/mps/mpi/mpi2_tool.h>
103 #include <dev/mps/mps_ioctl.h>
104 #include <dev/mps/mpsvar.h>
105 #include <dev/mps/mps_table.h>
106 #include <dev/mps/mps_sas.h>
107 #include <dev/pci/pcivar.h>
108 #include <dev/pci/pcireg.h>
110 static d_open_t mps_open;
111 static d_close_t mps_close;
112 static d_ioctl_t mps_ioctl_devsw;
114 static struct cdevsw mps_cdevsw = {
115 .d_version = D_VERSION,
118 .d_close = mps_close,
119 .d_ioctl = mps_ioctl_devsw,
123 typedef int (mps_user_f)(struct mps_command *, struct mps_usr_command *);
124 static mps_user_f mpi_pre_ioc_facts;
125 static mps_user_f mpi_pre_port_facts;
126 static mps_user_f mpi_pre_fw_download;
127 static mps_user_f mpi_pre_fw_upload;
128 static mps_user_f mpi_pre_sata_passthrough;
129 static mps_user_f mpi_pre_smp_passthrough;
130 static mps_user_f mpi_pre_config;
131 static mps_user_f mpi_pre_sas_io_unit_control;
133 static int mps_user_read_cfg_header(struct mps_softc *,
134 struct mps_cfg_page_req *);
135 static int mps_user_read_cfg_page(struct mps_softc *,
136 struct mps_cfg_page_req *, void *);
137 static int mps_user_read_extcfg_header(struct mps_softc *,
138 struct mps_ext_cfg_page_req *);
139 static int mps_user_read_extcfg_page(struct mps_softc *,
140 struct mps_ext_cfg_page_req *, void *);
141 static int mps_user_write_cfg_page(struct mps_softc *,
142 struct mps_cfg_page_req *, void *);
143 static int mps_user_setup_request(struct mps_command *,
144 struct mps_usr_command *);
145 static int mps_user_command(struct mps_softc *, struct mps_usr_command *);
147 static int mps_user_pass_thru(struct mps_softc *sc, mps_pass_thru_t *data);
148 static void mps_user_get_adapter_data(struct mps_softc *sc,
149 mps_adapter_data_t *data);
150 static void mps_user_read_pci_info(struct mps_softc *sc,
151 mps_pci_info_t *data);
152 static uint8_t mps_get_fw_diag_buffer_number(struct mps_softc *sc,
154 static int mps_post_fw_diag_buffer(struct mps_softc *sc,
155 mps_fw_diagnostic_buffer_t *pBuffer, uint32_t *return_code);
156 static int mps_release_fw_diag_buffer(struct mps_softc *sc,
157 mps_fw_diagnostic_buffer_t *pBuffer, uint32_t *return_code,
159 static int mps_diag_register(struct mps_softc *sc,
160 mps_fw_diag_register_t *diag_register, uint32_t *return_code);
161 static int mps_diag_unregister(struct mps_softc *sc,
162 mps_fw_diag_unregister_t *diag_unregister, uint32_t *return_code);
163 static int mps_diag_query(struct mps_softc *sc, mps_fw_diag_query_t *diag_query,
164 uint32_t *return_code);
165 static int mps_diag_read_buffer(struct mps_softc *sc,
166 mps_diag_read_buffer_t *diag_read_buffer, uint8_t *ioctl_buf,
167 uint32_t *return_code);
168 static int mps_diag_release(struct mps_softc *sc,
169 mps_fw_diag_release_t *diag_release, uint32_t *return_code);
170 static int mps_do_diag_action(struct mps_softc *sc, uint32_t action,
171 uint8_t *diag_action, uint32_t length, uint32_t *return_code);
172 static int mps_user_diag_action(struct mps_softc *sc, mps_diag_action_t *data);
173 static void mps_user_event_query(struct mps_softc *sc, mps_event_query_t *data);
174 static void mps_user_event_enable(struct mps_softc *sc,
175 mps_event_enable_t *data);
176 static int mps_user_event_report(struct mps_softc *sc,
177 mps_event_report_t *data);
178 static int mps_user_reg_access(struct mps_softc *sc, mps_reg_access_t *data);
179 static int mps_user_btdh(struct mps_softc *sc, mps_btdh_mapping_t *data);
181 static MALLOC_DEFINE(M_MPSUSER, "mps_user", "Buffers for mps(4) ioctls");
183 /* Macros from compat/freebsd32/freebsd32.h */
184 #define PTRIN(v) (void *)(uintptr_t)(v)
185 #define PTROUT(v) (uint32_t)(uintptr_t)(v)
187 #define CP(src,dst,fld) do { (dst).fld = (src).fld; } while (0)
188 #define PTRIN_CP(src,dst,fld) \
189 do { (dst).fld = PTRIN((src).fld); } while (0)
190 #define PTROUT_CP(src,dst,fld) \
191 do { (dst).fld = PTROUT((src).fld); } while (0)
194 mps_attach_user(struct mps_softc *sc)
198 unit = device_get_unit(sc->mps_dev);
199 sc->mps_cdev = make_dev(&mps_cdevsw, unit, UID_ROOT, GID_OPERATOR, 0640,
201 if (sc->mps_cdev == NULL) {
204 sc->mps_cdev->si_drv1 = sc;
209 mps_detach_user(struct mps_softc *sc)
212 /* XXX: do a purge of pending requests? */
213 if (sc->mps_cdev != NULL)
214 destroy_dev(sc->mps_cdev);
218 mps_open(struct cdev *dev, int flags, int fmt, struct thread *td)
225 mps_close(struct cdev *dev, int flags, int fmt, struct thread *td)
232 mps_user_read_cfg_header(struct mps_softc *sc,
233 struct mps_cfg_page_req *page_req)
235 MPI2_CONFIG_PAGE_HEADER *hdr;
236 struct mps_config_params params;
239 hdr = ¶ms.hdr.Struct;
240 params.action = MPI2_CONFIG_ACTION_PAGE_HEADER;
241 params.page_address = le32toh(page_req->page_address);
242 hdr->PageVersion = 0;
244 hdr->PageNumber = page_req->header.PageNumber;
245 hdr->PageType = page_req->header.PageType;
246 params.buffer = NULL;
248 params.callback = NULL;
250 if ((error = mps_read_config_page(sc, ¶ms)) != 0) {
252 * Leave the request. Without resetting the chip, it's
253 * still owned by it and we'll just get into trouble
254 * freeing it now. Mark it as abandoned so that if it
255 * shows up later it can be freed.
257 mps_printf(sc, "read_cfg_header timed out\n");
261 page_req->ioc_status = htole16(params.status);
262 if ((page_req->ioc_status & MPI2_IOCSTATUS_MASK) ==
263 MPI2_IOCSTATUS_SUCCESS) {
264 bcopy(hdr, &page_req->header, sizeof(page_req->header));
271 mps_user_read_cfg_page(struct mps_softc *sc, struct mps_cfg_page_req *page_req,
274 MPI2_CONFIG_PAGE_HEADER *reqhdr, *hdr;
275 struct mps_config_params params;
279 hdr = ¶ms.hdr.Struct;
280 hdr->PageVersion = reqhdr->PageVersion;
281 hdr->PageLength = reqhdr->PageLength;
282 hdr->PageNumber = reqhdr->PageNumber;
283 hdr->PageType = reqhdr->PageType & MPI2_CONFIG_PAGETYPE_MASK;
284 params.action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
285 params.page_address = le32toh(page_req->page_address);
287 params.length = le32toh(page_req->len);
288 params.callback = NULL;
290 if ((error = mps_read_config_page(sc, ¶ms)) != 0) {
291 mps_printf(sc, "mps_user_read_cfg_page timed out\n");
295 page_req->ioc_status = htole16(params.status);
300 mps_user_read_extcfg_header(struct mps_softc *sc,
301 struct mps_ext_cfg_page_req *ext_page_req)
303 MPI2_CONFIG_EXTENDED_PAGE_HEADER *hdr;
304 struct mps_config_params params;
307 hdr = ¶ms.hdr.Ext;
308 params.action = MPI2_CONFIG_ACTION_PAGE_HEADER;
309 hdr->PageVersion = ext_page_req->header.PageVersion;
310 hdr->PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
311 hdr->ExtPageLength = 0;
312 hdr->PageNumber = ext_page_req->header.PageNumber;
313 hdr->ExtPageType = ext_page_req->header.ExtPageType;
314 params.page_address = le32toh(ext_page_req->page_address);
315 params.buffer = NULL;
317 params.callback = NULL;
319 if ((error = mps_read_config_page(sc, ¶ms)) != 0) {
321 * Leave the request. Without resetting the chip, it's
322 * still owned by it and we'll just get into trouble
323 * freeing it now. Mark it as abandoned so that if it
324 * shows up later it can be freed.
326 mps_printf(sc, "mps_user_read_extcfg_header timed out\n");
330 ext_page_req->ioc_status = htole16(params.status);
331 if ((ext_page_req->ioc_status & MPI2_IOCSTATUS_MASK) ==
332 MPI2_IOCSTATUS_SUCCESS) {
333 ext_page_req->header.PageVersion = hdr->PageVersion;
334 ext_page_req->header.PageNumber = hdr->PageNumber;
335 ext_page_req->header.PageType = hdr->PageType;
336 ext_page_req->header.ExtPageLength = hdr->ExtPageLength;
337 ext_page_req->header.ExtPageType = hdr->ExtPageType;
344 mps_user_read_extcfg_page(struct mps_softc *sc,
345 struct mps_ext_cfg_page_req *ext_page_req, void *buf)
347 MPI2_CONFIG_EXTENDED_PAGE_HEADER *reqhdr, *hdr;
348 struct mps_config_params params;
352 hdr = ¶ms.hdr.Ext;
353 params.action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
354 params.page_address = le32toh(ext_page_req->page_address);
355 hdr->PageVersion = reqhdr->PageVersion;
356 hdr->PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
357 hdr->PageNumber = reqhdr->PageNumber;
358 hdr->ExtPageType = reqhdr->ExtPageType;
359 hdr->ExtPageLength = reqhdr->ExtPageLength;
361 params.length = le32toh(ext_page_req->len);
362 params.callback = NULL;
364 if ((error = mps_read_config_page(sc, ¶ms)) != 0) {
365 mps_printf(sc, "mps_user_read_extcfg_page timed out\n");
369 ext_page_req->ioc_status = htole16(params.status);
374 mps_user_write_cfg_page(struct mps_softc *sc,
375 struct mps_cfg_page_req *page_req, void *buf)
377 MPI2_CONFIG_PAGE_HEADER *reqhdr, *hdr;
378 struct mps_config_params params;
383 hdr = ¶ms.hdr.Struct;
384 hdr_attr = reqhdr->PageType & MPI2_CONFIG_PAGEATTR_MASK;
385 if (hdr_attr != MPI2_CONFIG_PAGEATTR_CHANGEABLE &&
386 hdr_attr != MPI2_CONFIG_PAGEATTR_PERSISTENT) {
387 mps_printf(sc, "page type 0x%x not changeable\n",
388 reqhdr->PageType & MPI2_CONFIG_PAGETYPE_MASK);
393 * There isn't any point in restoring stripped out attributes
394 * if you then mask them going down to issue the request.
397 hdr->PageVersion = reqhdr->PageVersion;
398 hdr->PageLength = reqhdr->PageLength;
399 hdr->PageNumber = reqhdr->PageNumber;
400 hdr->PageType = reqhdr->PageType;
401 params.action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
402 params.page_address = le32toh(page_req->page_address);
404 params.length = le32toh(page_req->len);
405 params.callback = NULL;
407 if ((error = mps_write_config_page(sc, ¶ms)) != 0) {
408 mps_printf(sc, "mps_write_cfg_page timed out\n");
412 page_req->ioc_status = htole16(params.status);
417 mpi_init_sge(struct mps_command *cm, void *req, void *sge)
421 space = (int)cm->cm_sc->facts->IOCRequestFrameSize * 4;
422 off = (uintptr_t)sge - (uintptr_t)req;
424 KASSERT(off < space, ("bad pointers %p %p, off %d, space %d",
425 req, sge, off, space));
428 cm->cm_sglsize = space - off;
432 * Prepare the mps_command for an IOC_FACTS request.
435 mpi_pre_ioc_facts(struct mps_command *cm, struct mps_usr_command *cmd)
437 MPI2_IOC_FACTS_REQUEST *req = (void *)cm->cm_req;
438 MPI2_IOC_FACTS_REPLY *rpl;
440 if (cmd->req_len != sizeof *req)
442 if (cmd->rpl_len != sizeof *rpl)
451 * Prepare the mps_command for a PORT_FACTS request.
454 mpi_pre_port_facts(struct mps_command *cm, struct mps_usr_command *cmd)
456 MPI2_PORT_FACTS_REQUEST *req = (void *)cm->cm_req;
457 MPI2_PORT_FACTS_REPLY *rpl;
459 if (cmd->req_len != sizeof *req)
461 if (cmd->rpl_len != sizeof *rpl)
470 * Prepare the mps_command for a FW_DOWNLOAD request.
473 mpi_pre_fw_download(struct mps_command *cm, struct mps_usr_command *cmd)
475 MPI2_FW_DOWNLOAD_REQUEST *req = (void *)cm->cm_req;
476 MPI2_FW_DOWNLOAD_REPLY *rpl;
477 MPI2_FW_DOWNLOAD_TCSGE tc;
481 * This code assumes there is room in the request's SGL for
482 * the TransactionContext plus at least a SGL chain element.
484 CTASSERT(sizeof req->SGL >= sizeof tc + MPS_SGC_SIZE);
486 if (cmd->req_len != sizeof *req)
488 if (cmd->rpl_len != sizeof *rpl)
494 error = copyin(cmd->buf, cm->cm_data, cmd->len);
498 mpi_init_sge(cm, req, &req->SGL);
499 bzero(&tc, sizeof tc);
502 * For now, the F/W image must be provided in a single request.
504 if ((req->MsgFlags & MPI2_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT) == 0)
506 if (req->TotalImageSize != cmd->len)
510 * The value of the first two elements is specified in the
511 * Fusion-MPT Message Passing Interface document.
514 tc.DetailsLength = 12;
516 tc.ImageSize = cmd->len;
518 cm->cm_flags |= MPS_CM_FLAGS_DATAOUT;
520 return (mps_push_sge(cm, &tc, sizeof tc, 0));
524 * Prepare the mps_command for a FW_UPLOAD request.
527 mpi_pre_fw_upload(struct mps_command *cm, struct mps_usr_command *cmd)
529 MPI2_FW_UPLOAD_REQUEST *req = (void *)cm->cm_req;
530 MPI2_FW_UPLOAD_REPLY *rpl;
531 MPI2_FW_UPLOAD_TCSGE tc;
534 * This code assumes there is room in the request's SGL for
535 * the TransactionContext plus at least a SGL chain element.
537 CTASSERT(sizeof req->SGL >= sizeof tc + MPS_SGC_SIZE);
539 if (cmd->req_len != sizeof *req)
541 if (cmd->rpl_len != sizeof *rpl)
544 mpi_init_sge(cm, req, &req->SGL);
545 bzero(&tc, sizeof tc);
548 * The value of the first two elements is specified in the
549 * Fusion-MPT Message Passing Interface document.
552 tc.DetailsLength = 12;
554 * XXX Is there any reason to fetch a partial image? I.e. to
555 * set ImageOffset to something other than 0?
558 tc.ImageSize = cmd->len;
560 cm->cm_flags |= MPS_CM_FLAGS_DATAIN;
562 return (mps_push_sge(cm, &tc, sizeof tc, 0));
566 * Prepare the mps_command for a SATA_PASSTHROUGH request.
569 mpi_pre_sata_passthrough(struct mps_command *cm, struct mps_usr_command *cmd)
571 MPI2_SATA_PASSTHROUGH_REQUEST *req = (void *)cm->cm_req;
572 MPI2_SATA_PASSTHROUGH_REPLY *rpl;
574 if (cmd->req_len != sizeof *req)
576 if (cmd->rpl_len != sizeof *rpl)
579 mpi_init_sge(cm, req, &req->SGL);
584 * Prepare the mps_command for a SMP_PASSTHROUGH request.
587 mpi_pre_smp_passthrough(struct mps_command *cm, struct mps_usr_command *cmd)
589 MPI2_SMP_PASSTHROUGH_REQUEST *req = (void *)cm->cm_req;
590 MPI2_SMP_PASSTHROUGH_REPLY *rpl;
592 if (cmd->req_len != sizeof *req)
594 if (cmd->rpl_len != sizeof *rpl)
597 mpi_init_sge(cm, req, &req->SGL);
602 * Prepare the mps_command for a CONFIG request.
605 mpi_pre_config(struct mps_command *cm, struct mps_usr_command *cmd)
607 MPI2_CONFIG_REQUEST *req = (void *)cm->cm_req;
608 MPI2_CONFIG_REPLY *rpl;
610 if (cmd->req_len != sizeof *req)
612 if (cmd->rpl_len != sizeof *rpl)
615 mpi_init_sge(cm, req, &req->PageBufferSGE);
620 * Prepare the mps_command for a SAS_IO_UNIT_CONTROL request.
623 mpi_pre_sas_io_unit_control(struct mps_command *cm,
624 struct mps_usr_command *cmd)
633 * A set of functions to prepare an mps_command for the various
634 * supported requests.
636 struct mps_user_func {
639 } mps_user_func_list[] = {
640 { MPI2_FUNCTION_IOC_FACTS, mpi_pre_ioc_facts },
641 { MPI2_FUNCTION_PORT_FACTS, mpi_pre_port_facts },
642 { MPI2_FUNCTION_FW_DOWNLOAD, mpi_pre_fw_download },
643 { MPI2_FUNCTION_FW_UPLOAD, mpi_pre_fw_upload },
644 { MPI2_FUNCTION_SATA_PASSTHROUGH, mpi_pre_sata_passthrough },
645 { MPI2_FUNCTION_SMP_PASSTHROUGH, mpi_pre_smp_passthrough},
646 { MPI2_FUNCTION_CONFIG, mpi_pre_config},
647 { MPI2_FUNCTION_SAS_IO_UNIT_CONTROL, mpi_pre_sas_io_unit_control },
648 { 0xFF, NULL } /* list end */
652 mps_user_setup_request(struct mps_command *cm, struct mps_usr_command *cmd)
654 MPI2_REQUEST_HEADER *hdr = (MPI2_REQUEST_HEADER *)cm->cm_req;
655 struct mps_user_func *f;
657 for (f = mps_user_func_list; f->f_pre != NULL; f++) {
658 if (hdr->Function == f->Function)
659 return (f->f_pre(cm, cmd));
665 mps_user_command(struct mps_softc *sc, struct mps_usr_command *cmd)
667 MPI2_REQUEST_HEADER *hdr;
668 MPI2_DEFAULT_REPLY *rpl;
670 struct mps_command *cm = NULL;
675 cm = mps_alloc_command(sc);
678 mps_printf(sc, "%s: no mps requests\n", __func__);
684 hdr = (MPI2_REQUEST_HEADER *)cm->cm_req;
686 mps_dprint(sc, MPS_USER, "%s: req %p %d rpl %p %d\n", __func__,
687 cmd->req, cmd->req_len, cmd->rpl, cmd->rpl_len);
689 if (cmd->req_len > (int)sc->facts->IOCRequestFrameSize * 4) {
691 goto RetFreeUnlocked;
693 err = copyin(cmd->req, hdr, cmd->req_len);
695 goto RetFreeUnlocked;
697 mps_dprint(sc, MPS_USER, "%s: Function %02X MsgFlags %02X\n", __func__,
698 hdr->Function, hdr->MsgFlags);
701 buf = malloc(cmd->len, M_MPSUSER, M_WAITOK|M_ZERO);
703 cm->cm_length = cmd->len;
709 cm->cm_flags = MPS_CM_FLAGS_SGE_SIMPLE;
710 cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
712 err = mps_user_setup_request(cm, cmd);
714 mps_printf(sc, "%s: unsupported parameter or unsupported "
715 "function in request (function = 0x%X)\n", __func__,
719 goto RetFreeUnlocked;
722 err = mps_wait_command(sc, &cm, 60, CAN_SLEEP);
724 if (err || (cm == NULL)) {
725 mps_printf(sc, "%s: invalid request: error %d\n",
730 rpl = (MPI2_DEFAULT_REPLY *)cm->cm_reply;
732 sz = rpl->MsgLength * 4;
736 if (sz > cmd->rpl_len) {
737 mps_printf(sc, "%s: user reply buffer (%d) smaller than "
738 "returned buffer (%d)\n", __func__, cmd->rpl_len, sz);
743 copyout(rpl, cmd->rpl, sz);
745 copyout(buf, cmd->buf, cmd->len);
746 mps_dprint(sc, MPS_USER, "%s: reply size %d\n", __func__, sz);
752 mps_free_command(sc, cm);
755 free(buf, M_MPSUSER);
760 mps_user_pass_thru(struct mps_softc *sc, mps_pass_thru_t *data)
762 MPI2_REQUEST_HEADER *hdr, tmphdr;
763 MPI2_DEFAULT_REPLY *rpl = NULL;
764 struct mps_command *cm = NULL;
765 int err = 0, dir = 0, sz;
766 uint8_t function = 0;
768 struct mpssas_target *targ = NULL;
771 * Only allow one passthru command at a time. Use the MPS_FLAGS_BUSY
772 * bit to denote that a passthru is being processed.
775 if (sc->mps_flags & MPS_FLAGS_BUSY) {
776 mps_dprint(sc, MPS_USER, "%s: Only one passthru command "
777 "allowed at a single time.", __func__);
781 sc->mps_flags |= MPS_FLAGS_BUSY;
785 * Do some validation on data direction. Valid cases are:
786 * 1) DataSize is 0 and direction is NONE
787 * 2) DataSize is non-zero and one of:
788 * a) direction is READ or
789 * b) direction is WRITE or
790 * c) direction is BOTH and DataOutSize is non-zero
791 * If valid and the direction is BOTH, change the direction to READ.
792 * if valid and the direction is not BOTH, make sure DataOutSize is 0.
794 if (((data->DataSize == 0) &&
795 (data->DataDirection == MPS_PASS_THRU_DIRECTION_NONE)) ||
796 ((data->DataSize != 0) &&
797 ((data->DataDirection == MPS_PASS_THRU_DIRECTION_READ) ||
798 (data->DataDirection == MPS_PASS_THRU_DIRECTION_WRITE) ||
799 ((data->DataDirection == MPS_PASS_THRU_DIRECTION_BOTH) &&
800 (data->DataOutSize != 0))))) {
801 if (data->DataDirection == MPS_PASS_THRU_DIRECTION_BOTH)
802 data->DataDirection = MPS_PASS_THRU_DIRECTION_READ;
804 data->DataOutSize = 0;
808 mps_dprint(sc, MPS_USER, "%s: req 0x%jx %d rpl 0x%jx %d "
809 "data in 0x%jx %d data out 0x%jx %d data dir %d\n", __func__,
810 data->PtrRequest, data->RequestSize, data->PtrReply,
811 data->ReplySize, data->PtrData, data->DataSize,
812 data->PtrDataOut, data->DataOutSize, data->DataDirection);
815 * copy in the header so we know what we're dealing with before we
816 * commit to allocating a command for it.
818 err = copyin(PTRIN(data->PtrRequest), &tmphdr, data->RequestSize);
820 goto RetFreeUnlocked;
822 if (data->RequestSize > (int)sc->facts->IOCRequestFrameSize * 4) {
824 goto RetFreeUnlocked;
827 function = tmphdr.Function;
828 mps_dprint(sc, MPS_USER, "%s: Function %02X MsgFlags %02X\n", __func__,
829 function, tmphdr.MsgFlags);
832 * Handle a passthru TM request.
834 if (function == MPI2_FUNCTION_SCSI_TASK_MGMT) {
835 MPI2_SCSI_TASK_MANAGE_REQUEST *task;
838 cm = mpssas_alloc_tm(sc);
844 /* Copy the header in. Only a small fixup is needed. */
845 task = (MPI2_SCSI_TASK_MANAGE_REQUEST *)cm->cm_req;
846 bcopy(&tmphdr, task, data->RequestSize);
847 task->TaskMID = cm->cm_desc.Default.SMID;
850 cm->cm_desc.HighPriority.RequestFlags =
851 MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY;
852 cm->cm_complete = NULL;
853 cm->cm_complete_data = NULL;
855 targ = mpssas_find_target_by_handle(sc->sassc, 0,
858 mps_dprint(sc, MPS_INFO,
859 "%s %d : invalid handle for requested TM 0x%x \n",
860 __func__, __LINE__, task->DevHandle);
863 mpssas_prepare_for_tm(sc, cm, targ, CAM_LUN_WILDCARD);
864 err = mps_wait_command(sc, &cm, 30, CAN_SLEEP);
869 mps_dprint(sc, MPS_FAULT, "%s: task management failed",
873 * Copy the reply data and sense data to user space.
875 if ((cm != NULL) && (cm->cm_reply != NULL)) {
876 rpl = (MPI2_DEFAULT_REPLY *)cm->cm_reply;
877 sz = rpl->MsgLength * 4;
879 if (sz > data->ReplySize) {
880 mps_printf(sc, "%s: user reply buffer (%d) "
881 "smaller than returned buffer (%d)\n",
882 __func__, data->ReplySize, sz);
885 copyout(cm->cm_reply, PTRIN(data->PtrReply),
889 mpssas_free_tm(sc, cm);
894 cm = mps_alloc_command(sc);
897 mps_printf(sc, "%s: no mps requests\n", __func__);
903 hdr = (MPI2_REQUEST_HEADER *)cm->cm_req;
904 bcopy(&tmphdr, hdr, data->RequestSize);
907 * Do some checking to make sure the IOCTL request contains a valid
908 * request. Then set the SGL info.
910 mpi_init_sge(cm, hdr, (void *)((uint8_t *)hdr + data->RequestSize));
913 * Set up for read, write or both. From check above, DataOutSize will
914 * be 0 if direction is READ or WRITE, but it will have some non-zero
915 * value if the direction is BOTH. So, just use the biggest size to get
916 * the cm_data buffer size. If direction is BOTH, 2 SGLs need to be set
917 * up; the first is for the request and the second will contain the
918 * response data. cm_out_len needs to be set here and this will be used
919 * when the SGLs are set up.
922 cm->cm_length = MAX(data->DataSize, data->DataOutSize);
923 cm->cm_out_len = data->DataOutSize;
925 if (cm->cm_length != 0) {
926 cm->cm_data = malloc(cm->cm_length, M_MPSUSER, M_WAITOK |
928 cm->cm_flags = MPS_CM_FLAGS_DATAIN;
929 if (data->DataOutSize) {
930 cm->cm_flags |= MPS_CM_FLAGS_DATAOUT;
931 err = copyin(PTRIN(data->PtrDataOut),
932 cm->cm_data, data->DataOutSize);
933 } else if (data->DataDirection ==
934 MPS_PASS_THRU_DIRECTION_WRITE) {
935 cm->cm_flags = MPS_CM_FLAGS_DATAOUT;
936 err = copyin(PTRIN(data->PtrData),
937 cm->cm_data, data->DataSize);
940 mps_dprint(sc, MPS_FAULT, "%s: failed to copy "
941 "IOCTL data from user space\n", __func__);
943 cm->cm_flags |= MPS_CM_FLAGS_SGE_SIMPLE;
944 cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
947 * Set up Sense buffer and SGL offset for IO passthru. SCSI IO request
948 * uses SCSI IO descriptor.
950 if ((function == MPI2_FUNCTION_SCSI_IO_REQUEST) ||
951 (function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) {
952 MPI2_SCSI_IO_REQUEST *scsi_io_req;
954 scsi_io_req = (MPI2_SCSI_IO_REQUEST *)hdr;
956 * Put SGE for data and data_out buffer at the end of
957 * scsi_io_request message header (64 bytes in total).
958 * Following above SGEs, the residual space will be used by
961 scsi_io_req->SenseBufferLength = (uint8_t)(data->RequestSize -
963 scsi_io_req->SenseBufferLowAddress = htole32(cm->cm_sense_busaddr);
966 * Set SGLOffset0 value. This is the number of dwords that SGL
967 * is offset from the beginning of MPI2_SCSI_IO_REQUEST struct.
969 scsi_io_req->SGLOffset0 = 24;
972 * Setup descriptor info. RAID passthrough must use the
973 * default request descriptor which is already set, so if this
974 * is a SCSI IO request, change the descriptor to SCSI IO.
975 * Also, if this is a SCSI IO request, handle the reply in the
976 * mpssas_scsio_complete function.
978 if (function == MPI2_FUNCTION_SCSI_IO_REQUEST) {
979 cm->cm_desc.SCSIIO.RequestFlags =
980 MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO;
981 cm->cm_desc.SCSIIO.DevHandle = scsi_io_req->DevHandle;
984 * Make sure the DevHandle is not 0 because this is a
987 if (scsi_io_req->DevHandle == 0) {
989 goto RetFreeUnlocked;
996 err = mps_wait_command(sc, &cm, 30, CAN_SLEEP);
998 if (err || (cm == NULL)) {
999 mps_printf(sc, "%s: invalid request: error %d\n", __func__,
1002 goto RetFreeUnlocked;
1006 * Sync the DMA data, if any. Then copy the data to user space.
1008 if (cm->cm_data != NULL) {
1009 if (cm->cm_flags & MPS_CM_FLAGS_DATAIN)
1010 dir = BUS_DMASYNC_POSTREAD;
1011 else if (cm->cm_flags & MPS_CM_FLAGS_DATAOUT)
1012 dir = BUS_DMASYNC_POSTWRITE;
1013 bus_dmamap_sync(sc->buffer_dmat, cm->cm_dmamap, dir);
1014 bus_dmamap_unload(sc->buffer_dmat, cm->cm_dmamap);
1016 if (cm->cm_flags & MPS_CM_FLAGS_DATAIN) {
1018 err = copyout(cm->cm_data,
1019 PTRIN(data->PtrData), data->DataSize);
1022 mps_dprint(sc, MPS_FAULT, "%s: failed to copy "
1023 "IOCTL data to user space\n", __func__);
1028 * Copy the reply data and sense data to user space.
1030 if (cm->cm_reply != NULL) {
1031 rpl = (MPI2_DEFAULT_REPLY *)cm->cm_reply;
1032 sz = rpl->MsgLength * 4;
1034 if (sz > data->ReplySize) {
1035 mps_printf(sc, "%s: user reply buffer (%d) smaller "
1036 "than returned buffer (%d)\n", __func__,
1037 data->ReplySize, sz);
1040 copyout(cm->cm_reply, PTRIN(data->PtrReply), data->ReplySize);
1043 if ((function == MPI2_FUNCTION_SCSI_IO_REQUEST) ||
1044 (function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) {
1045 if (((MPI2_SCSI_IO_REPLY *)rpl)->SCSIState &
1046 MPI2_SCSI_STATE_AUTOSENSE_VALID) {
1048 MIN((le32toh(((MPI2_SCSI_IO_REPLY *)rpl)->SenseCount)),
1049 sizeof(struct scsi_sense_data));
1051 copyout(cm->cm_sense, cm->cm_req + 64, sense_len);
1063 free(cm->cm_data, M_MPSUSER);
1064 mps_free_command(sc, cm);
1067 sc->mps_flags &= ~MPS_FLAGS_BUSY;
1074 mps_user_get_adapter_data(struct mps_softc *sc, mps_adapter_data_t *data)
1076 Mpi2ConfigReply_t mpi_reply;
1077 Mpi2BiosPage3_t config_page;
1080 * Use the PCI interface functions to get the Bus, Device, and Function
1083 data->PciInformation.u.bits.BusNumber = pci_get_bus(sc->mps_dev);
1084 data->PciInformation.u.bits.DeviceNumber = pci_get_slot(sc->mps_dev);
1085 data->PciInformation.u.bits.FunctionNumber =
1086 pci_get_function(sc->mps_dev);
1089 * Get the FW version that should already be saved in IOC Facts.
1091 data->MpiFirmwareVersion = sc->facts->FWVersion.Word;
1094 * General device info.
1096 data->AdapterType = MPSIOCTL_ADAPTER_TYPE_SAS2;
1097 if (sc->mps_flags & MPS_FLAGS_WD_AVAILABLE)
1098 data->AdapterType = MPSIOCTL_ADAPTER_TYPE_SAS2_SSS6200;
1099 data->PCIDeviceHwId = pci_get_device(sc->mps_dev);
1100 data->PCIDeviceHwRev = pci_read_config(sc->mps_dev, PCIR_REVID, 1);
1101 data->SubSystemId = pci_get_subdevice(sc->mps_dev);
1102 data->SubsystemVendorId = pci_get_subvendor(sc->mps_dev);
1105 * Get the driver version.
1107 strcpy((char *)&data->DriverVersion[0], MPS_DRIVER_VERSION);
1110 * Need to get BIOS Config Page 3 for the BIOS Version.
1112 data->BiosVersion = 0;
1114 if (mps_config_get_bios_pg3(sc, &mpi_reply, &config_page))
1115 printf("%s: Error while retrieving BIOS Version\n", __func__);
1117 data->BiosVersion = config_page.BiosVersion;
1122 mps_user_read_pci_info(struct mps_softc *sc, mps_pci_info_t *data)
1127 * Use the PCI interface functions to get the Bus, Device, and Function
1130 data->BusNumber = pci_get_bus(sc->mps_dev);
1131 data->DeviceNumber = pci_get_slot(sc->mps_dev);
1132 data->FunctionNumber = pci_get_function(sc->mps_dev);
1135 * Now get the interrupt vector and the pci header. The vector can
1136 * only be 0 right now. The header is the first 256 bytes of config
1139 data->InterruptVector = 0;
1140 for (i = 0; i < sizeof (data->PciHeader); i++) {
1141 data->PciHeader[i] = pci_read_config(sc->mps_dev, i, 1);
1146 mps_get_fw_diag_buffer_number(struct mps_softc *sc, uint32_t unique_id)
1150 for (index = 0; index < MPI2_DIAG_BUF_TYPE_COUNT; index++) {
1151 if (sc->fw_diag_buffer_list[index].unique_id == unique_id) {
1156 return (MPS_FW_DIAGNOSTIC_UID_NOT_FOUND);
1160 mps_post_fw_diag_buffer(struct mps_softc *sc,
1161 mps_fw_diagnostic_buffer_t *pBuffer, uint32_t *return_code)
1163 MPI2_DIAG_BUFFER_POST_REQUEST *req;
1164 MPI2_DIAG_BUFFER_POST_REPLY *reply = NULL;
1165 struct mps_command *cm = NULL;
1169 * If buffer is not enabled, just leave.
1171 *return_code = MPS_FW_DIAG_ERROR_POST_FAILED;
1172 if (!pBuffer->enabled) {
1173 return (MPS_DIAG_FAILURE);
1177 * Clear some flags initially.
1179 pBuffer->force_release = FALSE;
1180 pBuffer->valid_data = FALSE;
1181 pBuffer->owned_by_firmware = FALSE;
1186 cm = mps_alloc_command(sc);
1188 mps_printf(sc, "%s: no mps requests\n", __func__);
1189 return (MPS_DIAG_FAILURE);
1193 * Build the request for releasing the FW Diag Buffer and send it.
1195 req = (MPI2_DIAG_BUFFER_POST_REQUEST *)cm->cm_req;
1196 req->Function = MPI2_FUNCTION_DIAG_BUFFER_POST;
1197 req->BufferType = pBuffer->buffer_type;
1198 req->ExtendedType = pBuffer->extended_type;
1199 req->BufferLength = pBuffer->size;
1200 for (i = 0; i < (sizeof(req->ProductSpecific) / 4); i++)
1201 req->ProductSpecific[i] = pBuffer->product_specific[i];
1202 mps_from_u64(sc->fw_diag_busaddr, &req->BufferAddress);
1205 cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
1206 cm->cm_complete_data = NULL;
1209 * Send command synchronously.
1211 status = mps_wait_command(sc, &cm, 30, CAN_SLEEP);
1212 if (status || (cm == NULL)) {
1213 mps_printf(sc, "%s: invalid request: error %d\n", __func__,
1215 status = MPS_DIAG_FAILURE;
1220 * Process POST reply.
1222 reply = (MPI2_DIAG_BUFFER_POST_REPLY *)cm->cm_reply;
1223 if ((le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK) !=
1224 MPI2_IOCSTATUS_SUCCESS) {
1225 status = MPS_DIAG_FAILURE;
1226 mps_dprint(sc, MPS_FAULT, "%s: post of FW Diag Buffer failed "
1227 "with IOCStatus = 0x%x, IOCLogInfo = 0x%x and "
1228 "TransferLength = 0x%x\n", __func__,
1229 le16toh(reply->IOCStatus), le32toh(reply->IOCLogInfo),
1230 le32toh(reply->TransferLength));
1235 * Post was successful.
1237 pBuffer->valid_data = TRUE;
1238 pBuffer->owned_by_firmware = TRUE;
1239 *return_code = MPS_FW_DIAG_ERROR_SUCCESS;
1240 status = MPS_DIAG_SUCCESS;
1244 mps_free_command(sc, cm);
1249 mps_release_fw_diag_buffer(struct mps_softc *sc,
1250 mps_fw_diagnostic_buffer_t *pBuffer, uint32_t *return_code,
1253 MPI2_DIAG_RELEASE_REQUEST *req;
1254 MPI2_DIAG_RELEASE_REPLY *reply = NULL;
1255 struct mps_command *cm = NULL;
1259 * If buffer is not enabled, just leave.
1261 *return_code = MPS_FW_DIAG_ERROR_RELEASE_FAILED;
1262 if (!pBuffer->enabled) {
1263 mps_dprint(sc, MPS_USER, "%s: This buffer type is not "
1264 "supported by the IOC", __func__);
1265 return (MPS_DIAG_FAILURE);
1269 * Clear some flags initially.
1271 pBuffer->force_release = FALSE;
1272 pBuffer->valid_data = FALSE;
1273 pBuffer->owned_by_firmware = FALSE;
1278 cm = mps_alloc_command(sc);
1280 mps_printf(sc, "%s: no mps requests\n", __func__);
1281 return (MPS_DIAG_FAILURE);
1285 * Build the request for releasing the FW Diag Buffer and send it.
1287 req = (MPI2_DIAG_RELEASE_REQUEST *)cm->cm_req;
1288 req->Function = MPI2_FUNCTION_DIAG_RELEASE;
1289 req->BufferType = pBuffer->buffer_type;
1292 cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
1293 cm->cm_complete_data = NULL;
1296 * Send command synchronously.
1298 status = mps_wait_command(sc, &cm, 30, CAN_SLEEP);
1299 if (status || (cm == NULL)) {
1300 mps_printf(sc, "%s: invalid request: error %d\n", __func__,
1302 status = MPS_DIAG_FAILURE;
1307 * Process RELEASE reply.
1309 reply = (MPI2_DIAG_RELEASE_REPLY *)cm->cm_reply;
1310 if (((le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK) !=
1311 MPI2_IOCSTATUS_SUCCESS) || pBuffer->owned_by_firmware) {
1312 status = MPS_DIAG_FAILURE;
1313 mps_dprint(sc, MPS_FAULT, "%s: release of FW Diag Buffer "
1314 "failed with IOCStatus = 0x%x and IOCLogInfo = 0x%x\n",
1315 __func__, le16toh(reply->IOCStatus),
1316 le32toh(reply->IOCLogInfo));
1321 * Release was successful.
1323 *return_code = MPS_FW_DIAG_ERROR_SUCCESS;
1324 status = MPS_DIAG_SUCCESS;
1327 * If this was for an UNREGISTER diag type command, clear the unique ID.
1329 if (diag_type == MPS_FW_DIAG_TYPE_UNREGISTER) {
1330 pBuffer->unique_id = MPS_FW_DIAG_INVALID_UID;
1335 mps_free_command(sc, cm);
1341 mps_diag_register(struct mps_softc *sc, mps_fw_diag_register_t *diag_register,
1342 uint32_t *return_code)
1344 mps_fw_diagnostic_buffer_t *pBuffer;
1345 uint8_t extended_type, buffer_type, i;
1346 uint32_t buffer_size;
1350 extended_type = diag_register->ExtendedType;
1351 buffer_type = diag_register->BufferType;
1352 buffer_size = diag_register->RequestedBufferSize;
1353 unique_id = diag_register->UniqueId;
1356 * Check for valid buffer type
1358 if (buffer_type >= MPI2_DIAG_BUF_TYPE_COUNT) {
1359 *return_code = MPS_FW_DIAG_ERROR_INVALID_PARAMETER;
1360 return (MPS_DIAG_FAILURE);
1364 * Get the current buffer and look up the unique ID. The unique ID
1365 * should not be found. If it is, the ID is already in use.
1367 i = mps_get_fw_diag_buffer_number(sc, unique_id);
1368 pBuffer = &sc->fw_diag_buffer_list[buffer_type];
1369 if (i != MPS_FW_DIAGNOSTIC_UID_NOT_FOUND) {
1370 *return_code = MPS_FW_DIAG_ERROR_INVALID_UID;
1371 return (MPS_DIAG_FAILURE);
1375 * The buffer's unique ID should not be registered yet, and the given
1376 * unique ID cannot be 0.
1378 if ((pBuffer->unique_id != MPS_FW_DIAG_INVALID_UID) ||
1379 (unique_id == MPS_FW_DIAG_INVALID_UID)) {
1380 *return_code = MPS_FW_DIAG_ERROR_INVALID_UID;
1381 return (MPS_DIAG_FAILURE);
1385 * If this buffer is already posted as immediate, just change owner.
1387 if (pBuffer->immediate && pBuffer->owned_by_firmware &&
1388 (pBuffer->unique_id == MPS_FW_DIAG_INVALID_UID)) {
1389 pBuffer->immediate = FALSE;
1390 pBuffer->unique_id = unique_id;
1391 return (MPS_DIAG_SUCCESS);
1395 * Post a new buffer after checking if it's enabled. The DMA buffer
1396 * that is allocated will be contiguous (nsegments = 1).
1398 if (!pBuffer->enabled) {
1399 *return_code = MPS_FW_DIAG_ERROR_NO_BUFFER;
1400 return (MPS_DIAG_FAILURE);
1402 if (bus_dma_tag_create( sc->mps_parent_dmat, /* parent */
1403 1, 0, /* algnmnt, boundary */
1404 BUS_SPACE_MAXADDR_32BIT,/* lowaddr */
1405 BUS_SPACE_MAXADDR, /* highaddr */
1406 NULL, NULL, /* filter, filterarg */
1407 buffer_size, /* maxsize */
1409 buffer_size, /* maxsegsize */
1411 NULL, NULL, /* lockfunc, lockarg */
1412 &sc->fw_diag_dmat)) {
1413 device_printf(sc->mps_dev, "Cannot allocate FW diag buffer DMA "
1417 if (bus_dmamem_alloc(sc->fw_diag_dmat, (void **)&sc->fw_diag_buffer,
1418 BUS_DMA_NOWAIT, &sc->fw_diag_map)) {
1419 device_printf(sc->mps_dev, "Cannot allocate FW diag buffer "
1423 bzero(sc->fw_diag_buffer, buffer_size);
1424 bus_dmamap_load(sc->fw_diag_dmat, sc->fw_diag_map, sc->fw_diag_buffer,
1425 buffer_size, mps_memaddr_cb, &sc->fw_diag_busaddr, 0);
1426 pBuffer->size = buffer_size;
1429 * Copy the given info to the diag buffer and post the buffer.
1431 pBuffer->buffer_type = buffer_type;
1432 pBuffer->immediate = FALSE;
1433 if (buffer_type == MPI2_DIAG_BUF_TYPE_TRACE) {
1434 for (i = 0; i < (sizeof (pBuffer->product_specific) / 4);
1436 pBuffer->product_specific[i] =
1437 diag_register->ProductSpecific[i];
1440 pBuffer->extended_type = extended_type;
1441 pBuffer->unique_id = unique_id;
1442 status = mps_post_fw_diag_buffer(sc, pBuffer, return_code);
1445 * In case there was a failure, free the DMA buffer.
1447 if (status == MPS_DIAG_FAILURE) {
1448 if (sc->fw_diag_busaddr != 0)
1449 bus_dmamap_unload(sc->fw_diag_dmat, sc->fw_diag_map);
1450 if (sc->fw_diag_buffer != NULL)
1451 bus_dmamem_free(sc->fw_diag_dmat, sc->fw_diag_buffer,
1453 if (sc->fw_diag_dmat != NULL)
1454 bus_dma_tag_destroy(sc->fw_diag_dmat);
1461 mps_diag_unregister(struct mps_softc *sc,
1462 mps_fw_diag_unregister_t *diag_unregister, uint32_t *return_code)
1464 mps_fw_diagnostic_buffer_t *pBuffer;
1469 unique_id = diag_unregister->UniqueId;
1472 * Get the current buffer and look up the unique ID. The unique ID
1475 i = mps_get_fw_diag_buffer_number(sc, unique_id);
1476 if (i == MPS_FW_DIAGNOSTIC_UID_NOT_FOUND) {
1477 *return_code = MPS_FW_DIAG_ERROR_INVALID_UID;
1478 return (MPS_DIAG_FAILURE);
1481 pBuffer = &sc->fw_diag_buffer_list[i];
1484 * Try to release the buffer from FW before freeing it. If release
1485 * fails, don't free the DMA buffer in case FW tries to access it
1486 * later. If buffer is not owned by firmware, can't release it.
1488 if (!pBuffer->owned_by_firmware) {
1489 status = MPS_DIAG_SUCCESS;
1491 status = mps_release_fw_diag_buffer(sc, pBuffer, return_code,
1492 MPS_FW_DIAG_TYPE_UNREGISTER);
1496 * At this point, return the current status no matter what happens with
1499 pBuffer->unique_id = MPS_FW_DIAG_INVALID_UID;
1500 if (status == MPS_DIAG_SUCCESS) {
1501 if (sc->fw_diag_busaddr != 0)
1502 bus_dmamap_unload(sc->fw_diag_dmat, sc->fw_diag_map);
1503 if (sc->fw_diag_buffer != NULL)
1504 bus_dmamem_free(sc->fw_diag_dmat, sc->fw_diag_buffer,
1506 if (sc->fw_diag_dmat != NULL)
1507 bus_dma_tag_destroy(sc->fw_diag_dmat);
1514 mps_diag_query(struct mps_softc *sc, mps_fw_diag_query_t *diag_query,
1515 uint32_t *return_code)
1517 mps_fw_diagnostic_buffer_t *pBuffer;
1521 unique_id = diag_query->UniqueId;
1524 * If ID is valid, query on ID.
1525 * If ID is invalid, query on buffer type.
1527 if (unique_id == MPS_FW_DIAG_INVALID_UID) {
1528 i = diag_query->BufferType;
1529 if (i >= MPI2_DIAG_BUF_TYPE_COUNT) {
1530 *return_code = MPS_FW_DIAG_ERROR_INVALID_UID;
1531 return (MPS_DIAG_FAILURE);
1534 i = mps_get_fw_diag_buffer_number(sc, unique_id);
1535 if (i == MPS_FW_DIAGNOSTIC_UID_NOT_FOUND) {
1536 *return_code = MPS_FW_DIAG_ERROR_INVALID_UID;
1537 return (MPS_DIAG_FAILURE);
1542 * Fill query structure with the diag buffer info.
1544 pBuffer = &sc->fw_diag_buffer_list[i];
1545 diag_query->BufferType = pBuffer->buffer_type;
1546 diag_query->ExtendedType = pBuffer->extended_type;
1547 if (diag_query->BufferType == MPI2_DIAG_BUF_TYPE_TRACE) {
1548 for (i = 0; i < (sizeof(diag_query->ProductSpecific) / 4);
1550 diag_query->ProductSpecific[i] =
1551 pBuffer->product_specific[i];
1554 diag_query->TotalBufferSize = pBuffer->size;
1555 diag_query->DriverAddedBufferSize = 0;
1556 diag_query->UniqueId = pBuffer->unique_id;
1557 diag_query->ApplicationFlags = 0;
1558 diag_query->DiagnosticFlags = 0;
1561 * Set/Clear application flags
1563 if (pBuffer->immediate) {
1564 diag_query->ApplicationFlags &= ~MPS_FW_DIAG_FLAG_APP_OWNED;
1566 diag_query->ApplicationFlags |= MPS_FW_DIAG_FLAG_APP_OWNED;
1568 if (pBuffer->valid_data || pBuffer->owned_by_firmware) {
1569 diag_query->ApplicationFlags |= MPS_FW_DIAG_FLAG_BUFFER_VALID;
1571 diag_query->ApplicationFlags &= ~MPS_FW_DIAG_FLAG_BUFFER_VALID;
1573 if (pBuffer->owned_by_firmware) {
1574 diag_query->ApplicationFlags |=
1575 MPS_FW_DIAG_FLAG_FW_BUFFER_ACCESS;
1577 diag_query->ApplicationFlags &=
1578 ~MPS_FW_DIAG_FLAG_FW_BUFFER_ACCESS;
1581 return (MPS_DIAG_SUCCESS);
1585 mps_diag_read_buffer(struct mps_softc *sc,
1586 mps_diag_read_buffer_t *diag_read_buffer, uint8_t *ioctl_buf,
1587 uint32_t *return_code)
1589 mps_fw_diagnostic_buffer_t *pBuffer;
1594 unique_id = diag_read_buffer->UniqueId;
1597 * Get the current buffer and look up the unique ID. The unique ID
1600 i = mps_get_fw_diag_buffer_number(sc, unique_id);
1601 if (i == MPS_FW_DIAGNOSTIC_UID_NOT_FOUND) {
1602 *return_code = MPS_FW_DIAG_ERROR_INVALID_UID;
1603 return (MPS_DIAG_FAILURE);
1606 pBuffer = &sc->fw_diag_buffer_list[i];
1609 * Make sure requested read is within limits
1611 if (diag_read_buffer->StartingOffset + diag_read_buffer->BytesToRead >
1613 *return_code = MPS_FW_DIAG_ERROR_INVALID_PARAMETER;
1614 return (MPS_DIAG_FAILURE);
1618 * Copy the requested data from DMA to the diag_read_buffer. The DMA
1619 * buffer that was allocated is one contiguous buffer.
1621 pData = (uint8_t *)(sc->fw_diag_buffer +
1622 diag_read_buffer->StartingOffset);
1623 if (copyout(pData, ioctl_buf, diag_read_buffer->BytesToRead) != 0)
1624 return (MPS_DIAG_FAILURE);
1625 diag_read_buffer->Status = 0;
1628 * Set or clear the Force Release flag.
1630 if (pBuffer->force_release) {
1631 diag_read_buffer->Flags |= MPS_FW_DIAG_FLAG_FORCE_RELEASE;
1633 diag_read_buffer->Flags &= ~MPS_FW_DIAG_FLAG_FORCE_RELEASE;
1637 * If buffer is to be reregistered, make sure it's not already owned by
1640 status = MPS_DIAG_SUCCESS;
1641 if (!pBuffer->owned_by_firmware) {
1642 if (diag_read_buffer->Flags & MPS_FW_DIAG_FLAG_REREGISTER) {
1643 status = mps_post_fw_diag_buffer(sc, pBuffer,
1652 mps_diag_release(struct mps_softc *sc, mps_fw_diag_release_t *diag_release,
1653 uint32_t *return_code)
1655 mps_fw_diagnostic_buffer_t *pBuffer;
1660 unique_id = diag_release->UniqueId;
1663 * Get the current buffer and look up the unique ID. The unique ID
1666 i = mps_get_fw_diag_buffer_number(sc, unique_id);
1667 if (i == MPS_FW_DIAGNOSTIC_UID_NOT_FOUND) {
1668 *return_code = MPS_FW_DIAG_ERROR_INVALID_UID;
1669 return (MPS_DIAG_FAILURE);
1672 pBuffer = &sc->fw_diag_buffer_list[i];
1675 * If buffer is not owned by firmware, it's already been released.
1677 if (!pBuffer->owned_by_firmware) {
1678 *return_code = MPS_FW_DIAG_ERROR_ALREADY_RELEASED;
1679 return (MPS_DIAG_FAILURE);
1683 * Release the buffer.
1685 status = mps_release_fw_diag_buffer(sc, pBuffer, return_code,
1686 MPS_FW_DIAG_TYPE_RELEASE);
1691 mps_do_diag_action(struct mps_softc *sc, uint32_t action, uint8_t *diag_action,
1692 uint32_t length, uint32_t *return_code)
1694 mps_fw_diag_register_t diag_register;
1695 mps_fw_diag_unregister_t diag_unregister;
1696 mps_fw_diag_query_t diag_query;
1697 mps_diag_read_buffer_t diag_read_buffer;
1698 mps_fw_diag_release_t diag_release;
1699 int status = MPS_DIAG_SUCCESS;
1700 uint32_t original_return_code;
1702 original_return_code = *return_code;
1703 *return_code = MPS_FW_DIAG_ERROR_SUCCESS;
1706 case MPS_FW_DIAG_TYPE_REGISTER:
1709 MPS_FW_DIAG_ERROR_INVALID_PARAMETER;
1710 status = MPS_DIAG_FAILURE;
1713 if (copyin(diag_action, &diag_register,
1714 sizeof(diag_register)) != 0)
1715 return (MPS_DIAG_FAILURE);
1716 status = mps_diag_register(sc, &diag_register,
1720 case MPS_FW_DIAG_TYPE_UNREGISTER:
1721 if (length < sizeof(diag_unregister)) {
1723 MPS_FW_DIAG_ERROR_INVALID_PARAMETER;
1724 status = MPS_DIAG_FAILURE;
1727 if (copyin(diag_action, &diag_unregister,
1728 sizeof(diag_unregister)) != 0)
1729 return (MPS_DIAG_FAILURE);
1730 status = mps_diag_unregister(sc, &diag_unregister,
1734 case MPS_FW_DIAG_TYPE_QUERY:
1735 if (length < sizeof (diag_query)) {
1737 MPS_FW_DIAG_ERROR_INVALID_PARAMETER;
1738 status = MPS_DIAG_FAILURE;
1741 if (copyin(diag_action, &diag_query, sizeof(diag_query))
1743 return (MPS_DIAG_FAILURE);
1744 status = mps_diag_query(sc, &diag_query, return_code);
1745 if (status == MPS_DIAG_SUCCESS)
1746 if (copyout(&diag_query, diag_action,
1747 sizeof (diag_query)) != 0)
1748 return (MPS_DIAG_FAILURE);
1751 case MPS_FW_DIAG_TYPE_READ_BUFFER:
1752 if (copyin(diag_action, &diag_read_buffer,
1753 sizeof(diag_read_buffer)) != 0)
1754 return (MPS_DIAG_FAILURE);
1755 if (length < diag_read_buffer.BytesToRead) {
1757 MPS_FW_DIAG_ERROR_INVALID_PARAMETER;
1758 status = MPS_DIAG_FAILURE;
1761 status = mps_diag_read_buffer(sc, &diag_read_buffer,
1762 PTRIN(diag_read_buffer.PtrDataBuffer),
1764 if (status == MPS_DIAG_SUCCESS) {
1765 if (copyout(&diag_read_buffer, diag_action,
1766 sizeof(diag_read_buffer) -
1767 sizeof(diag_read_buffer.PtrDataBuffer)) !=
1769 return (MPS_DIAG_FAILURE);
1773 case MPS_FW_DIAG_TYPE_RELEASE:
1774 if (length < sizeof(diag_release)) {
1776 MPS_FW_DIAG_ERROR_INVALID_PARAMETER;
1777 status = MPS_DIAG_FAILURE;
1780 if (copyin(diag_action, &diag_release,
1781 sizeof(diag_release)) != 0)
1782 return (MPS_DIAG_FAILURE);
1783 status = mps_diag_release(sc, &diag_release,
1788 *return_code = MPS_FW_DIAG_ERROR_INVALID_PARAMETER;
1789 status = MPS_DIAG_FAILURE;
1793 if ((status == MPS_DIAG_FAILURE) &&
1794 (original_return_code == MPS_FW_DIAG_NEW) &&
1795 (*return_code != MPS_FW_DIAG_ERROR_SUCCESS))
1796 status = MPS_DIAG_SUCCESS;
1802 mps_user_diag_action(struct mps_softc *sc, mps_diag_action_t *data)
1807 * Only allow one diag action at one time.
1809 if (sc->mps_flags & MPS_FLAGS_BUSY) {
1810 mps_dprint(sc, MPS_USER, "%s: Only one FW diag command "
1811 "allowed at a single time.", __func__);
1814 sc->mps_flags |= MPS_FLAGS_BUSY;
1817 * Send diag action request
1819 if (data->Action == MPS_FW_DIAG_TYPE_REGISTER ||
1820 data->Action == MPS_FW_DIAG_TYPE_UNREGISTER ||
1821 data->Action == MPS_FW_DIAG_TYPE_QUERY ||
1822 data->Action == MPS_FW_DIAG_TYPE_READ_BUFFER ||
1823 data->Action == MPS_FW_DIAG_TYPE_RELEASE) {
1824 status = mps_do_diag_action(sc, data->Action,
1825 PTRIN(data->PtrDiagAction), data->Length,
1830 sc->mps_flags &= ~MPS_FLAGS_BUSY;
1835 * Copy the event recording mask and the event queue size out. For
1836 * clarification, the event recording mask (events_to_record) is not the same
1837 * thing as the event mask (event_mask). events_to_record has a bit set for
1838 * every event type that is to be recorded by the driver, and event_mask has a
1839 * bit cleared for every event that is allowed into the driver from the IOC.
1840 * They really have nothing to do with each other.
1843 mps_user_event_query(struct mps_softc *sc, mps_event_query_t *data)
1848 data->Entries = MPS_EVENT_QUEUE_SIZE;
1850 for (i = 0; i < 4; i++) {
1851 data->Types[i] = sc->events_to_record[i];
1857 * Set the driver's event mask according to what's been given. See
1858 * mps_user_event_query for explanation of the event recording mask and the IOC
1859 * event mask. It's the app's responsibility to enable event logging by setting
1860 * the bits in events_to_record. Initially, no events will be logged.
1863 mps_user_event_enable(struct mps_softc *sc, mps_event_enable_t *data)
1868 for (i = 0; i < 4; i++) {
1869 sc->events_to_record[i] = data->Types[i];
1875 * Copy out the events that have been recorded, up to the max events allowed.
1878 mps_user_event_report(struct mps_softc *sc, mps_event_report_t *data)
1885 if ((size >= sizeof(sc->recorded_events)) && (status == 0)) {
1887 if (copyout((void *)sc->recorded_events,
1888 PTRIN(data->PtrEvents), size) != 0)
1893 * data->Size value is not large enough to copy event data.
1899 * Change size value to match the number of bytes that were copied.
1902 data->Size = sizeof(sc->recorded_events);
1909 * Record events into the driver from the IOC if they are not masked.
1912 mpssas_record_event(struct mps_softc *sc,
1913 MPI2_EVENT_NOTIFICATION_REPLY *event_reply)
1917 uint16_t event_data_len;
1918 boolean_t sendAEN = FALSE;
1920 event = event_reply->Event;
1923 * Generate a system event to let anyone who cares know that a
1924 * LOG_ENTRY_ADDED event has occurred. This is sent no matter what the
1925 * event mask is set to.
1927 if (event == MPI2_EVENT_LOG_ENTRY_ADDED) {
1932 * Record the event only if its corresponding bit is set in
1933 * events_to_record. event_index is the index into recorded_events and
1934 * event_number is the overall number of an event being recorded since
1935 * start-of-day. event_index will roll over; event_number will never
1938 i = (uint8_t)(event / 32);
1939 j = (uint8_t)(event % 32);
1940 if ((i < 4) && ((1 << j) & sc->events_to_record[i])) {
1941 i = sc->event_index;
1942 sc->recorded_events[i].Type = event;
1943 sc->recorded_events[i].Number = ++sc->event_number;
1944 bzero(sc->recorded_events[i].Data, MPS_MAX_EVENT_DATA_LENGTH *
1946 event_data_len = event_reply->EventDataLength;
1948 if (event_data_len > 0) {
1950 * Limit data to size in m_event entry
1952 if (event_data_len > MPS_MAX_EVENT_DATA_LENGTH) {
1953 event_data_len = MPS_MAX_EVENT_DATA_LENGTH;
1955 for (j = 0; j < event_data_len; j++) {
1956 sc->recorded_events[i].Data[j] =
1957 event_reply->EventData[j];
1961 * check for index wrap-around
1963 if (++i == MPS_EVENT_QUEUE_SIZE) {
1966 sc->event_index = (uint8_t)i;
1969 * Set flag to send the event.
1976 * Generate a system event if flag is set to let anyone who cares know
1977 * that an event has occurred.
1980 //SLM-how to send a system event (see kqueue, kevent)
1981 // (void) ddi_log_sysevent(mpt->m_dip, DDI_VENDOR_LSI, "MPT_SAS",
1982 // "SAS", NULL, NULL, DDI_NOSLEEP);
1987 mps_user_reg_access(struct mps_softc *sc, mps_reg_access_t *data)
1991 switch (data->Command) {
1993 * IO access is not supported.
1997 mps_dprint(sc, MPS_USER, "IO access is not supported. "
1998 "Use memory access.");
2003 data->RegData = mps_regread(sc, data->RegOffset);
2007 mps_regwrite(sc, data->RegOffset, data->RegData);
2019 mps_user_btdh(struct mps_softc *sc, mps_btdh_mapping_t *data)
2021 uint8_t bt2dh = FALSE;
2022 uint8_t dh2bt = FALSE;
2023 uint16_t dev_handle, bus, target;
2026 target = data->TargetID;
2027 dev_handle = data->DevHandle;
2030 * When DevHandle is 0xFFFF and Bus/Target are not 0xFFFF, use Bus/
2031 * Target to get DevHandle. When Bus/Target are 0xFFFF and DevHandle is
2032 * not 0xFFFF, use DevHandle to get Bus/Target. Anything else is
2035 if ((bus == 0xFFFF) && (target == 0xFFFF) && (dev_handle != 0xFFFF))
2037 if ((dev_handle == 0xFFFF) && (bus != 0xFFFF) && (target != 0xFFFF))
2039 if (!dh2bt && !bt2dh)
2043 * Only handle bus of 0. Make sure target is within range.
2049 if (target > sc->max_devices) {
2050 mps_dprint(sc, MPS_FAULT, "Target ID is out of range "
2051 "for Bus/Target to DevHandle mapping.");
2054 dev_handle = sc->mapping_table[target].dev_handle;
2056 data->DevHandle = dev_handle;
2059 target = mps_mapping_get_tid_from_handle(sc, dev_handle);
2061 data->TargetID = target;
2068 mps_ioctl(struct cdev *dev, u_long cmd, void *arg, int flag,
2071 struct mps_softc *sc;
2072 struct mps_cfg_page_req *page_req;
2073 struct mps_ext_cfg_page_req *ext_page_req;
2075 int error, msleep_ret;
2079 page_req = (void *)arg;
2080 ext_page_req = (void *)arg;
2083 case MPSIO_READ_CFG_HEADER:
2085 error = mps_user_read_cfg_header(sc, page_req);
2088 case MPSIO_READ_CFG_PAGE:
2089 mps_page = malloc(page_req->len, M_MPSUSER, M_WAITOK | M_ZERO);
2090 error = copyin(page_req->buf, mps_page,
2091 sizeof(MPI2_CONFIG_PAGE_HEADER));
2095 error = mps_user_read_cfg_page(sc, page_req, mps_page);
2099 error = copyout(mps_page, page_req->buf, page_req->len);
2101 case MPSIO_READ_EXT_CFG_HEADER:
2103 error = mps_user_read_extcfg_header(sc, ext_page_req);
2106 case MPSIO_READ_EXT_CFG_PAGE:
2107 mps_page = malloc(ext_page_req->len, M_MPSUSER, M_WAITOK|M_ZERO);
2108 error = copyin(ext_page_req->buf, mps_page,
2109 sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
2113 error = mps_user_read_extcfg_page(sc, ext_page_req, mps_page);
2117 error = copyout(mps_page, ext_page_req->buf, ext_page_req->len);
2119 case MPSIO_WRITE_CFG_PAGE:
2120 mps_page = malloc(page_req->len, M_MPSUSER, M_WAITOK|M_ZERO);
2121 error = copyin(page_req->buf, mps_page, page_req->len);
2125 error = mps_user_write_cfg_page(sc, page_req, mps_page);
2128 case MPSIO_MPS_COMMAND:
2129 error = mps_user_command(sc, (struct mps_usr_command *)arg);
2131 case MPTIOCTL_PASS_THRU:
2133 * The user has requested to pass through a command to be
2134 * executed by the MPT firmware. Call our routine which does
2135 * this. Only allow one passthru IOCTL at one time.
2137 error = mps_user_pass_thru(sc, (mps_pass_thru_t *)arg);
2139 case MPTIOCTL_GET_ADAPTER_DATA:
2141 * The user has requested to read adapter data. Call our
2142 * routine which does this.
2145 mps_user_get_adapter_data(sc, (mps_adapter_data_t *)arg);
2147 case MPTIOCTL_GET_PCI_INFO:
2149 * The user has requested to read pci info. Call
2150 * our routine which does this.
2154 mps_user_read_pci_info(sc, (mps_pci_info_t *)arg);
2157 case MPTIOCTL_RESET_ADAPTER:
2159 sc->port_enable_complete = 0;
2160 uint32_t reinit_start = time_uptime;
2161 error = mps_reinit(sc);
2162 /* Sleep for 300 second. */
2163 msleep_ret = msleep(&sc->port_enable_complete, &sc->mps_mtx, PRIBIO,
2164 "mps_porten", 300 * hz);
2167 printf("Port Enable did not complete after Diag "
2168 "Reset msleep error %d.\n", msleep_ret);
2170 mps_dprint(sc, MPS_USER,
2171 "Hard Reset with Port Enable completed in %d seconds.\n",
2172 (uint32_t) (time_uptime - reinit_start));
2174 case MPTIOCTL_DIAG_ACTION:
2176 * The user has done a diag buffer action. Call our routine
2177 * which does this. Only allow one diag action at one time.
2180 error = mps_user_diag_action(sc, (mps_diag_action_t *)arg);
2183 case MPTIOCTL_EVENT_QUERY:
2185 * The user has done an event query. Call our routine which does
2189 mps_user_event_query(sc, (mps_event_query_t *)arg);
2191 case MPTIOCTL_EVENT_ENABLE:
2193 * The user has done an event enable. Call our routine which
2197 mps_user_event_enable(sc, (mps_event_enable_t *)arg);
2199 case MPTIOCTL_EVENT_REPORT:
2201 * The user has done an event report. Call our routine which
2204 error = mps_user_event_report(sc, (mps_event_report_t *)arg);
2206 case MPTIOCTL_REG_ACCESS:
2208 * The user has requested register access. Call our routine
2212 error = mps_user_reg_access(sc, (mps_reg_access_t *)arg);
2215 case MPTIOCTL_BTDH_MAPPING:
2217 * The user has requested to translate a bus/target to a
2218 * DevHandle or a DevHandle to a bus/target. Call our routine
2221 error = mps_user_btdh(sc, (mps_btdh_mapping_t *)arg);
2228 if (mps_page != NULL)
2229 free(mps_page, M_MPSUSER);
2234 #ifdef COMPAT_FREEBSD32
2236 struct mps_cfg_page_req32 {
2237 MPI2_CONFIG_PAGE_HEADER header;
2238 uint32_t page_address;
2241 uint16_t ioc_status;
2244 struct mps_ext_cfg_page_req32 {
2245 MPI2_CONFIG_EXTENDED_PAGE_HEADER header;
2246 uint32_t page_address;
2249 uint16_t ioc_status;
2252 struct mps_raid_action32 {
2256 uint8_t phys_disk_num;
2257 uint32_t action_data_word;
2260 uint32_t volume_status;
2261 uint32_t action_data[4];
2262 uint16_t action_status;
2263 uint16_t ioc_status;
2267 struct mps_usr_command32 {
2277 #define MPSIO_READ_CFG_HEADER32 _IOWR('M', 200, struct mps_cfg_page_req32)
2278 #define MPSIO_READ_CFG_PAGE32 _IOWR('M', 201, struct mps_cfg_page_req32)
2279 #define MPSIO_READ_EXT_CFG_HEADER32 _IOWR('M', 202, struct mps_ext_cfg_page_req32)
2280 #define MPSIO_READ_EXT_CFG_PAGE32 _IOWR('M', 203, struct mps_ext_cfg_page_req32)
2281 #define MPSIO_WRITE_CFG_PAGE32 _IOWR('M', 204, struct mps_cfg_page_req32)
2282 #define MPSIO_RAID_ACTION32 _IOWR('M', 205, struct mps_raid_action32)
2283 #define MPSIO_MPS_COMMAND32 _IOWR('M', 210, struct mps_usr_command32)
2286 mps_ioctl32(struct cdev *dev, u_long cmd32, void *_arg, int flag,
2289 struct mps_cfg_page_req32 *page32 = _arg;
2290 struct mps_ext_cfg_page_req32 *ext32 = _arg;
2291 struct mps_raid_action32 *raid32 = _arg;
2292 struct mps_usr_command32 *user32 = _arg;
2294 struct mps_cfg_page_req page;
2295 struct mps_ext_cfg_page_req ext;
2296 struct mps_raid_action raid;
2297 struct mps_usr_command user;
2303 case MPSIO_READ_CFG_HEADER32:
2304 case MPSIO_READ_CFG_PAGE32:
2305 case MPSIO_WRITE_CFG_PAGE32:
2306 if (cmd32 == MPSIO_READ_CFG_HEADER32)
2307 cmd = MPSIO_READ_CFG_HEADER;
2308 else if (cmd32 == MPSIO_READ_CFG_PAGE32)
2309 cmd = MPSIO_READ_CFG_PAGE;
2311 cmd = MPSIO_WRITE_CFG_PAGE;
2312 CP(*page32, arg.page, header);
2313 CP(*page32, arg.page, page_address);
2314 PTRIN_CP(*page32, arg.page, buf);
2315 CP(*page32, arg.page, len);
2316 CP(*page32, arg.page, ioc_status);
2319 case MPSIO_READ_EXT_CFG_HEADER32:
2320 case MPSIO_READ_EXT_CFG_PAGE32:
2321 if (cmd32 == MPSIO_READ_EXT_CFG_HEADER32)
2322 cmd = MPSIO_READ_EXT_CFG_HEADER;
2324 cmd = MPSIO_READ_EXT_CFG_PAGE;
2325 CP(*ext32, arg.ext, header);
2326 CP(*ext32, arg.ext, page_address);
2327 PTRIN_CP(*ext32, arg.ext, buf);
2328 CP(*ext32, arg.ext, len);
2329 CP(*ext32, arg.ext, ioc_status);
2332 case MPSIO_RAID_ACTION32:
2333 cmd = MPSIO_RAID_ACTION;
2334 CP(*raid32, arg.raid, action);
2335 CP(*raid32, arg.raid, volume_bus);
2336 CP(*raid32, arg.raid, volume_id);
2337 CP(*raid32, arg.raid, phys_disk_num);
2338 CP(*raid32, arg.raid, action_data_word);
2339 PTRIN_CP(*raid32, arg.raid, buf);
2340 CP(*raid32, arg.raid, len);
2341 CP(*raid32, arg.raid, volume_status);
2342 bcopy(raid32->action_data, arg.raid.action_data,
2343 sizeof arg.raid.action_data);
2344 CP(*raid32, arg.raid, ioc_status);
2345 CP(*raid32, arg.raid, write);
2348 case MPSIO_MPS_COMMAND32:
2349 cmd = MPSIO_MPS_COMMAND;
2350 PTRIN_CP(*user32, arg.user, req);
2351 CP(*user32, arg.user, req_len);
2352 PTRIN_CP(*user32, arg.user, rpl);
2353 CP(*user32, arg.user, rpl_len);
2354 PTRIN_CP(*user32, arg.user, buf);
2355 CP(*user32, arg.user, len);
2356 CP(*user32, arg.user, flags);
2362 error = mps_ioctl(dev, cmd, &arg, flag, td);
2363 if (error == 0 && (cmd32 & IOC_OUT) != 0) {
2365 case MPSIO_READ_CFG_HEADER32:
2366 case MPSIO_READ_CFG_PAGE32:
2367 case MPSIO_WRITE_CFG_PAGE32:
2368 CP(arg.page, *page32, header);
2369 CP(arg.page, *page32, page_address);
2370 PTROUT_CP(arg.page, *page32, buf);
2371 CP(arg.page, *page32, len);
2372 CP(arg.page, *page32, ioc_status);
2375 case MPSIO_READ_EXT_CFG_HEADER32:
2376 case MPSIO_READ_EXT_CFG_PAGE32:
2377 CP(arg.ext, *ext32, header);
2378 CP(arg.ext, *ext32, page_address);
2379 PTROUT_CP(arg.ext, *ext32, buf);
2380 CP(arg.ext, *ext32, len);
2381 CP(arg.ext, *ext32, ioc_status);
2384 case MPSIO_RAID_ACTION32:
2385 CP(arg.raid, *raid32, action);
2386 CP(arg.raid, *raid32, volume_bus);
2387 CP(arg.raid, *raid32, volume_id);
2388 CP(arg.raid, *raid32, phys_disk_num);
2389 CP(arg.raid, *raid32, action_data_word);
2390 PTROUT_CP(arg.raid, *raid32, buf);
2391 CP(arg.raid, *raid32, len);
2392 CP(arg.raid, *raid32, volume_status);
2393 bcopy(arg.raid.action_data, raid32->action_data,
2394 sizeof arg.raid.action_data);
2395 CP(arg.raid, *raid32, ioc_status);
2396 CP(arg.raid, *raid32, write);
2399 case MPSIO_MPS_COMMAND32:
2400 PTROUT_CP(arg.user, *user32, req);
2401 CP(arg.user, *user32, req_len);
2402 PTROUT_CP(arg.user, *user32, rpl);
2403 CP(arg.user, *user32, rpl_len);
2404 PTROUT_CP(arg.user, *user32, buf);
2405 CP(arg.user, *user32, len);
2406 CP(arg.user, *user32, flags);
2413 #endif /* COMPAT_FREEBSD32 */
2416 mps_ioctl_devsw(struct cdev *dev, u_long com, caddr_t arg, int flag,
2419 #ifdef COMPAT_FREEBSD32
2420 if (SV_CURPROC_FLAG(SV_ILP32))
2421 return (mps_ioctl32(dev, com, arg, flag, td));
2423 return (mps_ioctl(dev, com, arg, flag, td));