sys/dev/mvs/mvs.c

   1 /*-
   2  * Copyright (c) 2010 Alexander Motin <mav@FreeBSD.org>
   3  * All rights reserved.
   4  *
   5  * Redistribution and use in source and binary forms, with or without
   6  * modification, are permitted provided that the following conditions
   7  * are met:
   8  * 1. Redistributions of source code must retain the above copyright
   9  *    notice, this list of conditions and the following disclaimer,
  10  *    without modification, immediately at the beginning of the file.
  11  * 2. Redistributions in binary form must reproduce the above copyright
  12  *    notice, this list of conditions and the following disclaimer in the
  13  *    documentation and/or other materials provided with the distribution.
  14  *
  15  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  16  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  17  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  18  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  19  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  20  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  21  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  22  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  23  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  24  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  25  */
  26
  27 #include <sys/cdefs.h>
  28 __FBSDID("$FreeBSD$");
  29
  30 #include <sys/param.h>
  31 #include <sys/module.h>
  32 #include <sys/systm.h>
  33 #include <sys/kernel.h>
  34 #include <sys/ata.h>
  35 #include <sys/bus.h>
  36 #include <sys/conf.h>
  37 #include <sys/endian.h>
  38 #include <sys/malloc.h>
  39 #include <sys/lock.h>
  40 #include <sys/mutex.h>
  41 #include <vm/uma.h>
  42 #include <machine/stdarg.h>
  43 #include <machine/resource.h>
  44 #include <machine/bus.h>
  45 #include <sys/rman.h>
  46 #include <dev/pci/pcivar.h>
  47 #include "mvs.h"
  48
  49 #include <cam/cam.h>
  50 #include <cam/cam_ccb.h>
  51 #include <cam/cam_sim.h>
  52 #include <cam/cam_xpt_sim.h>
  53 #include <cam/cam_debug.h>
  54
  55 /* local prototypes */
  56 static int mvs_ch_init(device_t dev);
  57 static int mvs_ch_deinit(device_t dev);
  58 static int mvs_ch_suspend(device_t dev);
  59 static int mvs_ch_resume(device_t dev);
  60 static void mvs_dmainit(device_t dev);
  61 static void mvs_dmasetupc_cb(void *xsc,
  62         bus_dma_segment_t *segs, int nsegs, int error);
  63 static void mvs_dmafini(device_t dev);
  64 static void mvs_slotsalloc(device_t dev);
  65 static void mvs_slotsfree(device_t dev);
  66 static void mvs_setup_edma_queues(device_t dev);
  67 static void mvs_set_edma_mode(device_t dev, enum mvs_edma_mode mode);
  68 static void mvs_ch_pm(void *arg);
  69 static void mvs_ch_intr_locked(void *data);
  70 static void mvs_ch_intr(void *data);
  71 static void mvs_reset(device_t dev);
  72 static void mvs_softreset(device_t dev, union ccb *ccb);
  73
  74 static int mvs_sata_connect(struct mvs_channel *ch);
  75 static int mvs_sata_phy_reset(device_t dev);
  76 static int mvs_wait(device_t dev, u_int s, u_int c, int t);
  77 static void mvs_tfd_read(device_t dev, union ccb *ccb);
  78 static void mvs_tfd_write(device_t dev, union ccb *ccb);
  79 static void mvs_legacy_intr(device_t dev, int poll);
  80 static void mvs_crbq_intr(device_t dev);
  81 static void mvs_begin_transaction(device_t dev, union ccb *ccb);
  82 static void mvs_legacy_execute_transaction(struct mvs_slot *slot);
  83 static void mvs_timeout(struct mvs_slot *slot);
  84 static void mvs_dmasetprd(void *arg,
  85         bus_dma_segment_t *segs, int nsegs, int error);
  86 static void mvs_requeue_frozen(device_t dev);
  87 static void mvs_execute_transaction(struct mvs_slot *slot);
  88 static void mvs_end_transaction(struct mvs_slot *slot, enum mvs_err_type et);
  89
  90 static void mvs_issue_recovery(device_t dev);
  91 static void mvs_process_read_log(device_t dev, union ccb *ccb);
  92 static void mvs_process_request_sense(device_t dev, union ccb *ccb);
  93
  94 static void mvsaction(struct cam_sim *sim, union ccb *ccb);
  95 static void mvspoll(struct cam_sim *sim);
  96
  97 static MALLOC_DEFINE(M_MVS, "MVS driver", "MVS driver data buffers");
  98
  99 #define recovery_type           spriv_field0
 100 #define RECOVERY_NONE           0
 101 #define RECOVERY_READ_LOG       1
 102 #define RECOVERY_REQUEST_SENSE  2
 103 #define recovery_slot           spriv_field1
 104
 105 static int
 106 mvs_ch_probe(device_t dev)
 107 {
 108
 109         device_set_desc_copy(dev, "Marvell SATA channel");
 110         return (0);
 111 }
 112
 113 static int
 114 mvs_ch_attach(device_t dev)
 115 {
 116         struct mvs_controller *ctlr = device_get_softc(device_get_parent(dev));
 117         struct mvs_channel *ch = device_get_softc(dev);
 118         struct cam_devq *devq;
 119         int rid, error, i, sata_rev = 0;
 120
 121         ch->dev = dev;
 122         ch->unit = (intptr_t)device_get_ivars(dev);
 123         ch->quirks = ctlr->quirks;
 124         mtx_init(&ch->mtx, "MVS channel lock", NULL, MTX_DEF);
 125         resource_int_value(device_get_name(dev),
 126             device_get_unit(dev), "pm_level", &ch->pm_level);
 127         if (ch->pm_level > 3)
 128                 callout_init_mtx(&ch->pm_timer, &ch->mtx, 0);
 129         callout_init_mtx(&ch->reset_timer, &ch->mtx, 0);
 130         resource_int_value(device_get_name(dev),
 131             device_get_unit(dev), "sata_rev", &sata_rev);
 132         for (i = 0; i < 16; i++) {
 133                 ch->user[i].revision = sata_rev;
 134                 ch->user[i].mode = 0;
 135                 ch->user[i].bytecount = (ch->quirks & MVS_Q_GENIIE) ? 8192 : 2048;
 136                 ch->user[i].tags = MVS_MAX_SLOTS;
 137                 ch->curr[i] = ch->user[i];
 138                 if (ch->pm_level) {
 139                         ch->user[i].caps = CTS_SATA_CAPS_H_PMREQ |
 140                             CTS_SATA_CAPS_H_APST |
 141                             CTS_SATA_CAPS_D_PMREQ | CTS_SATA_CAPS_D_APST;
 142                 }
 143                 ch->user[i].caps |= CTS_SATA_CAPS_H_AN;
 144         }
 145         rid = ch->unit;
 146         if (!(ch->r_mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
 147             &rid, RF_ACTIVE)))
 148                 return (ENXIO);
 149         mvs_dmainit(dev);
 150         mvs_slotsalloc(dev);
 151         mvs_ch_init(dev);
 152         mtx_lock(&ch->mtx);
 153         rid = ATA_IRQ_RID;
 154         if (!(ch->r_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ,
 155             &rid, RF_SHAREABLE | RF_ACTIVE))) {
 156                 device_printf(dev, "Unable to map interrupt\n");
 157                 error = ENXIO;
 158                 goto err0;
 159         }
 160         if ((bus_setup_intr(dev, ch->r_irq, ATA_INTR_FLAGS, NULL,
 161             mvs_ch_intr_locked, dev, &ch->ih))) {
 162                 device_printf(dev, "Unable to setup interrupt\n");
 163                 error = ENXIO;
 164                 goto err1;
 165         }
 166         /* Create the device queue for our SIM. */
 167         devq = cam_simq_alloc(MVS_MAX_SLOTS - 1);
 168         if (devq == NULL) {
 169                 device_printf(dev, "Unable to allocate simq\n");
 170                 error = ENOMEM;
 171                 goto err1;
 172         }
 173         /* Construct SIM entry */
 174         ch->sim = cam_sim_alloc(mvsaction, mvspoll, "mvsch", ch,
 175             device_get_unit(dev), &ch->mtx,
 176             2, (ch->quirks & MVS_Q_GENI) ? 0 : MVS_MAX_SLOTS - 1,
 177             devq);
 178         if (ch->sim == NULL) {
 179                 cam_simq_free(devq);
 180                 device_printf(dev, "unable to allocate sim\n");
 181                 error = ENOMEM;
 182                 goto err1;
 183         }
 184         if (xpt_bus_register(ch->sim, dev, 0) != CAM_SUCCESS) {
 185                 device_printf(dev, "unable to register xpt bus\n");
 186                 error = ENXIO;
 187                 goto err2;
 188         }
 189         if (xpt_create_path(&ch->path, /*periph*/NULL, cam_sim_path(ch->sim),
 190             CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
 191                 device_printf(dev, "unable to create path\n");
 192                 error = ENXIO;
 193                 goto err3;
 194         }
 195         if (ch->pm_level > 3) {
 196                 callout_reset(&ch->pm_timer,
 197                     (ch->pm_level == 4) ? hz / 1000 : hz / 8,
 198                     mvs_ch_pm, dev);
 199         }
 200         mtx_unlock(&ch->mtx);
 201         return (0);
 202
 203 err3:
 204         xpt_bus_deregister(cam_sim_path(ch->sim));
 205 err2:
 206         cam_sim_free(ch->sim, /*free_devq*/TRUE);
 207 err1:
 208         bus_release_resource(dev, SYS_RES_IRQ, ATA_IRQ_RID, ch->r_irq);
 209 err0:
 210         bus_release_resource(dev, SYS_RES_MEMORY, ch->unit, ch->r_mem);
 211         mtx_unlock(&ch->mtx);
 212         mtx_destroy(&ch->mtx);
 213         return (error);
 214 }
 215
 216 static int
 217 mvs_ch_detach(device_t dev)
 218 {
 219         struct mvs_channel *ch = device_get_softc(dev);
 220
 221         mtx_lock(&ch->mtx);
 222         xpt_async(AC_LOST_DEVICE, ch->path, NULL);
 223         /* Forget about reset. */
 224         if (ch->resetting) {
 225                 ch->resetting = 0;
 226                 xpt_release_simq(ch->sim, TRUE);
 227         }
 228         xpt_free_path(ch->path);
 229         xpt_bus_deregister(cam_sim_path(ch->sim));
 230         cam_sim_free(ch->sim, /*free_devq*/TRUE);
 231         mtx_unlock(&ch->mtx);
 232
 233         if (ch->pm_level > 3)
 234                 callout_drain(&ch->pm_timer);
 235         callout_drain(&ch->reset_timer);
 236         bus_teardown_intr(dev, ch->r_irq, ch->ih);
 237         bus_release_resource(dev, SYS_RES_IRQ, ATA_IRQ_RID, ch->r_irq);
 238
 239         mvs_ch_deinit(dev);
 240         mvs_slotsfree(dev);
 241         mvs_dmafini(dev);
 242
 243         bus_release_resource(dev, SYS_RES_MEMORY, ch->unit, ch->r_mem);
 244         mtx_destroy(&ch->mtx);
 245         return (0);
 246 }
 247
 248 static int
 249 mvs_ch_init(device_t dev)
 250 {
 251         struct mvs_channel *ch = device_get_softc(dev);
 252         uint32_t reg;
 253
 254         /* Disable port interrupts */
 255         ATA_OUTL(ch->r_mem, EDMA_IEM, 0);
 256         /* Stop EDMA */
 257         ch->curr_mode = MVS_EDMA_UNKNOWN;
 258         mvs_set_edma_mode(dev, MVS_EDMA_OFF);
 259         /* Clear and configure FIS interrupts. */
 260         ATA_OUTL(ch->r_mem, SATA_FISIC, 0);
 261         reg = ATA_INL(ch->r_mem, SATA_FISC);
 262         reg |= SATA_FISC_FISWAIT4HOSTRDYEN_B1;
 263         ATA_OUTL(ch->r_mem, SATA_FISC, reg);
 264         reg = ATA_INL(ch->r_mem, SATA_FISIM);
 265         reg |= SATA_FISC_FISWAIT4HOSTRDYEN_B1;
 266         ATA_OUTL(ch->r_mem, SATA_FISC, reg);
 267         /* Clear SATA error register. */
 268         ATA_OUTL(ch->r_mem, SATA_SE, 0xffffffff);
 269         /* Clear any outstanding error interrupts. */
 270         ATA_OUTL(ch->r_mem, EDMA_IEC, 0);
 271         /* Unmask all error interrupts */
 272         ATA_OUTL(ch->r_mem, EDMA_IEM, ~EDMA_IE_TRANSIENT);
 273         return (0);
 274 }
 275
 276 static int
 277 mvs_ch_deinit(device_t dev)
 278 {
 279         struct mvs_channel *ch = device_get_softc(dev);
 280
 281         /* Stop EDMA */
 282         mvs_set_edma_mode(dev, MVS_EDMA_OFF);
 283         /* Disable port interrupts. */
 284         ATA_OUTL(ch->r_mem, EDMA_IEM, 0);
 285         return (0);
 286 }
 287
 288 static int
 289 mvs_ch_suspend(device_t dev)
 290 {
 291         struct mvs_channel *ch = device_get_softc(dev);
 292
 293         mtx_lock(&ch->mtx);
 294         xpt_freeze_simq(ch->sim, 1);
 295         while (ch->oslots)
 296                 msleep(ch, &ch->mtx, PRIBIO, "mvssusp", hz/100);
 297         /* Forget about reset. */
 298         if (ch->resetting) {
 299                 ch->resetting = 0;
 300                 callout_stop(&ch->reset_timer);
 301                 xpt_release_simq(ch->sim, TRUE);
 302         }
 303         mvs_ch_deinit(dev);
 304         mtx_unlock(&ch->mtx);
 305         return (0);
 306 }
 307
 308 static int
 309 mvs_ch_resume(device_t dev)
 310 {
 311         struct mvs_channel *ch = device_get_softc(dev);
 312
 313         mtx_lock(&ch->mtx);
 314         mvs_ch_init(dev);
 315         mvs_reset(dev);
 316         xpt_release_simq(ch->sim, TRUE);
 317         mtx_unlock(&ch->mtx);
 318         return (0);
 319 }
 320
 321 struct mvs_dc_cb_args {
 322         bus_addr_t maddr;
 323         int error;
 324 };
 325
 326 static void
 327 mvs_dmainit(device_t dev)
 328 {
 329         struct mvs_channel *ch = device_get_softc(dev);
 330         struct mvs_dc_cb_args dcba;
 331
 332         /* EDMA command request area. */
 333         if (bus_dma_tag_create(bus_get_dma_tag(dev), 1024, 0,
 334             BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR,
 335             NULL, NULL, MVS_WORKRQ_SIZE, 1, MVS_WORKRQ_SIZE,
 336             0, NULL, NULL, &ch->dma.workrq_tag))
 337                 goto error;
 338         if (bus_dmamem_alloc(ch->dma.workrq_tag, (void **)&ch->dma.workrq, 0,
 339             &ch->dma.workrq_map))
 340                 goto error;
 341         if (bus_dmamap_load(ch->dma.workrq_tag, ch->dma.workrq_map,
 342             ch->dma.workrq, MVS_WORKRQ_SIZE, mvs_dmasetupc_cb, &dcba, 0) ||
 343             dcba.error) {
 344                 bus_dmamem_free(ch->dma.workrq_tag,
 345                     ch->dma.workrq, ch->dma.workrq_map);
 346                 goto error;
 347         }
 348         ch->dma.workrq_bus = dcba.maddr;
 349         /* EDMA command response area. */
 350         if (bus_dma_tag_create(bus_get_dma_tag(dev), 256, 0,
 351             BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR,
 352             NULL, NULL, MVS_WORKRP_SIZE, 1, MVS_WORKRP_SIZE,
 353             0, NULL, NULL, &ch->dma.workrp_tag))
 354                 goto error;
 355         if (bus_dmamem_alloc(ch->dma.workrp_tag, (void **)&ch->dma.workrp, 0,
 356             &ch->dma.workrp_map))
 357                 goto error;
 358         if (bus_dmamap_load(ch->dma.workrp_tag, ch->dma.workrp_map,
 359             ch->dma.workrp, MVS_WORKRP_SIZE, mvs_dmasetupc_cb, &dcba, 0) ||
 360             dcba.error) {
 361                 bus_dmamem_free(ch->dma.workrp_tag,
 362                     ch->dma.workrp, ch->dma.workrp_map);
 363                 goto error;
 364         }
 365         ch->dma.workrp_bus = dcba.maddr;
 366         /* Data area. */
 367         if (bus_dma_tag_create(bus_get_dma_tag(dev), 2, MVS_EPRD_MAX,
 368             BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR,
 369             NULL, NULL,
 370             MVS_SG_ENTRIES * PAGE_SIZE * MVS_MAX_SLOTS,
 371             MVS_SG_ENTRIES, MVS_EPRD_MAX,
 372             0, busdma_lock_mutex, &ch->mtx, &ch->dma.data_tag)) {
 373                 goto error;
 374         }
 375         return;
 376
 377 error:
 378         device_printf(dev, "WARNING - DMA initialization failed\n");
 379         mvs_dmafini(dev);
 380 }
 381
 382 static void
 383 mvs_dmasetupc_cb(void *xsc, bus_dma_segment_t *segs, int nsegs, int error)
 384 {
 385         struct mvs_dc_cb_args *dcba = (struct mvs_dc_cb_args *)xsc;
 386
 387         if (!(dcba->error = error))
 388                 dcba->maddr = segs[0].ds_addr;
 389 }
 390
 391 static void
 392 mvs_dmafini(device_t dev)
 393 {
 394         struct mvs_channel *ch = device_get_softc(dev);
 395
 396         if (ch->dma.data_tag) {
 397                 bus_dma_tag_destroy(ch->dma.data_tag);
 398                 ch->dma.data_tag = NULL;
 399         }
 400         if (ch->dma.workrp_bus) {
 401                 bus_dmamap_unload(ch->dma.workrp_tag, ch->dma.workrp_map);
 402                 bus_dmamem_free(ch->dma.workrp_tag,
 403                     ch->dma.workrp, ch->dma.workrp_map);
 404                 ch->dma.workrp_bus = 0;
 405                 ch->dma.workrp_map = NULL;
 406                 ch->dma.workrp = NULL;
 407         }
 408         if (ch->dma.workrp_tag) {
 409                 bus_dma_tag_destroy(ch->dma.workrp_tag);
 410                 ch->dma.workrp_tag = NULL;
 411         }
 412         if (ch->dma.workrq_bus) {
 413                 bus_dmamap_unload(ch->dma.workrq_tag, ch->dma.workrq_map);
 414                 bus_dmamem_free(ch->dma.workrq_tag,
 415                     ch->dma.workrq, ch->dma.workrq_map);
 416                 ch->dma.workrq_bus = 0;
 417                 ch->dma.workrq_map = NULL;
 418                 ch->dma.workrq = NULL;
 419         }
 420         if (ch->dma.workrq_tag) {
 421                 bus_dma_tag_destroy(ch->dma.workrq_tag);
 422                 ch->dma.workrq_tag = NULL;
 423         }
 424 }
 425
 426 static void
 427 mvs_slotsalloc(device_t dev)
 428 {
 429         struct mvs_channel *ch = device_get_softc(dev);
 430         int i;
 431
 432         /* Alloc and setup command/dma slots */
 433         bzero(ch->slot, sizeof(ch->slot));
 434         for (i = 0; i < MVS_MAX_SLOTS; i++) {
 435                 struct mvs_slot *slot = &ch->slot[i];
 436
 437                 slot->dev = dev;
 438                 slot->slot = i;
 439                 slot->state = MVS_SLOT_EMPTY;
 440                 slot->ccb = NULL;
 441                 callout_init_mtx(&slot->timeout, &ch->mtx, 0);
 442
 443                 if (bus_dmamap_create(ch->dma.data_tag, 0, &slot->dma.data_map))
 444                         device_printf(ch->dev, "FAILURE - create data_map\n");
 445         }
 446 }
 447
 448 static void
 449 mvs_slotsfree(device_t dev)
 450 {
 451         struct mvs_channel *ch = device_get_softc(dev);
 452         int i;
 453
 454         /* Free all dma slots */
 455         for (i = 0; i < MVS_MAX_SLOTS; i++) {
 456                 struct mvs_slot *slot = &ch->slot[i];
 457
 458                 callout_drain(&slot->timeout);
 459                 if (slot->dma.data_map) {
 460                         bus_dmamap_destroy(ch->dma.data_tag, slot->dma.data_map);
 461                         slot->dma.data_map = NULL;
 462                 }
 463         }
 464 }
 465
 466 static void
 467 mvs_setup_edma_queues(device_t dev)
 468 {
 469         struct mvs_channel *ch = device_get_softc(dev);
 470         uint64_t work;
 471
 472         /* Requests queue. */
 473         work = ch->dma.workrq_bus;
 474         ATA_OUTL(ch->r_mem, EDMA_REQQBAH, work >> 32);
 475         ATA_OUTL(ch->r_mem, EDMA_REQQIP, work & 0xffffffff);
 476         ATA_OUTL(ch->r_mem, EDMA_REQQOP, work & 0xffffffff);
 477         bus_dmamap_sync(ch->dma.workrq_tag, ch->dma.workrq_map,
 478             BUS_DMASYNC_PREWRITE);
 479         /* Reponses queue. */
 480         memset(ch->dma.workrp, 0xff, MVS_WORKRP_SIZE);
 481         work = ch->dma.workrp_bus;
 482         ATA_OUTL(ch->r_mem, EDMA_RESQBAH, work >> 32);
 483         ATA_OUTL(ch->r_mem, EDMA_RESQIP, work & 0xffffffff);
 484         ATA_OUTL(ch->r_mem, EDMA_RESQOP, work & 0xffffffff);
 485         bus_dmamap_sync(ch->dma.workrp_tag, ch->dma.workrp_map,
 486             BUS_DMASYNC_PREREAD);
 487         ch->out_idx = 0;
 488         ch->in_idx = 0;
 489 }
 490
 491 static void
 492 mvs_set_edma_mode(device_t dev, enum mvs_edma_mode mode)
 493 {
 494         struct mvs_channel *ch = device_get_softc(dev);
 495         int timeout;
 496         uint32_t ecfg, fcfg, hc, ltm, unkn;
 497
 498         if (mode == ch->curr_mode)
 499                 return;
 500         /* If we are running, we should stop first. */
 501         if (ch->curr_mode != MVS_EDMA_OFF) {
 502                 ATA_OUTL(ch->r_mem, EDMA_CMD, EDMA_CMD_EDSEDMA);
 503                 timeout = 0;
 504                 while (ATA_INL(ch->r_mem, EDMA_CMD) & EDMA_CMD_EENEDMA) {
 505                         DELAY(1000);
 506                         if (timeout++ > 1000) {
 507                                 device_printf(dev, "stopping EDMA engine failed\n");
 508                                 break;
 509                         }
 510                 };
 511         }
 512         ch->curr_mode = mode;
 513         ch->fbs_enabled = 0;
 514         ch->fake_busy = 0;
 515         /* Report mode to controller. Needed for correct CCC operation. */
 516         MVS_EDMA(device_get_parent(dev), dev, mode);
 517         /* Configure new mode. */
 518         ecfg = EDMA_CFG_RESERVED | EDMA_CFG_RESERVED2 | EDMA_CFG_EHOSTQUEUECACHEEN;
 519         if (ch->pm_present) {
 520                 ecfg |= EDMA_CFG_EMASKRXPM;
 521                 if (ch->quirks & MVS_Q_GENIIE) {
 522                         ecfg |= EDMA_CFG_EEDMAFBS;
 523                         ch->fbs_enabled = 1;
 524                 }
 525         }
 526         if (ch->quirks & MVS_Q_GENI)
 527                 ecfg |= EDMA_CFG_ERDBSZ;
 528         else if (ch->quirks & MVS_Q_GENII)
 529                 ecfg |= EDMA_CFG_ERDBSZEXT | EDMA_CFG_EWRBUFFERLEN;
 530         if (ch->quirks & MVS_Q_CT)
 531                 ecfg |= EDMA_CFG_ECUTTHROUGHEN;
 532         if (mode != MVS_EDMA_OFF)
 533                 ecfg |= EDMA_CFG_EEARLYCOMPLETIONEN;
 534         if (mode == MVS_EDMA_QUEUED)
 535                 ecfg |= EDMA_CFG_EQUE;
 536         else if (mode == MVS_EDMA_NCQ)
 537                 ecfg |= EDMA_CFG_ESATANATVCMDQUE;
 538         ATA_OUTL(ch->r_mem, EDMA_CFG, ecfg);
 539         mvs_setup_edma_queues(dev);
 540         if (ch->quirks & MVS_Q_GENIIE) {
 541                 /* Configure FBS-related registers */
 542                 fcfg = ATA_INL(ch->r_mem, SATA_FISC);
 543                 ltm = ATA_INL(ch->r_mem, SATA_LTM);
 544                 hc = ATA_INL(ch->r_mem, EDMA_HC);
 545                 if (ch->fbs_enabled) {
 546                         fcfg |= SATA_FISC_FISDMAACTIVATESYNCRESP;
 547                         if (mode == MVS_EDMA_NCQ) {
 548                                 fcfg &= ~SATA_FISC_FISWAIT4HOSTRDYEN_B0;
 549                                 hc &= ~EDMA_IE_EDEVERR;
 550                         } else {
 551                                 fcfg |= SATA_FISC_FISWAIT4HOSTRDYEN_B0;
 552                                 hc |= EDMA_IE_EDEVERR;
 553                         }
 554                         ltm |= (1 << 8);
 555                 } else {
 556                         fcfg &= ~SATA_FISC_FISDMAACTIVATESYNCRESP;
 557                         fcfg &= ~SATA_FISC_FISWAIT4HOSTRDYEN_B0;
 558                         hc |= EDMA_IE_EDEVERR;
 559                         ltm &= ~(1 << 8);
 560                 }
 561                 ATA_OUTL(ch->r_mem, SATA_FISC, fcfg);
 562                 ATA_OUTL(ch->r_mem, SATA_LTM, ltm);
 563                 ATA_OUTL(ch->r_mem, EDMA_HC, hc);
 564                 /* This is some magic, required to handle several DRQs
 565                  * with basic DMA. */
 566                 unkn = ATA_INL(ch->r_mem, EDMA_UNKN_RESD);
 567                 if (mode == MVS_EDMA_OFF)
 568                         unkn |= 1;
 569                 else
 570                         unkn &= ~1;
 571                 ATA_OUTL(ch->r_mem, EDMA_UNKN_RESD, unkn);
 572         }
 573         /* Run EDMA. */
 574         if (mode != MVS_EDMA_OFF)
 575                 ATA_OUTL(ch->r_mem, EDMA_CMD, EDMA_CMD_EENEDMA);
 576 }
 577
 578 devclass_t mvs_devclass;
 579 devclass_t mvsch_devclass;
 580 static device_method_t mvsch_methods[] = {
 581         DEVMETHOD(device_probe,     mvs_ch_probe),
 582         DEVMETHOD(device_attach,    mvs_ch_attach),
 583         DEVMETHOD(device_detach,    mvs_ch_detach),
 584         DEVMETHOD(device_suspend,   mvs_ch_suspend),
 585         DEVMETHOD(device_resume,    mvs_ch_resume),
 586         { 0, 0 }
 587 };
 588 static driver_t mvsch_driver = {
 589         "mvsch",
 590         mvsch_methods,
 591         sizeof(struct mvs_channel)
 592 };
 593 DRIVER_MODULE(mvsch, mvs, mvsch_driver, mvsch_devclass, 0, 0);
 594 DRIVER_MODULE(mvsch, sata, mvsch_driver, mvsch_devclass, 0, 0);
 595
 596 static void
 597 mvs_phy_check_events(device_t dev, u_int32_t serr)
 598 {
 599         struct mvs_channel *ch = device_get_softc(dev);
 600
 601         if (ch->pm_level == 0) {
 602                 u_int32_t status = ATA_INL(ch->r_mem, SATA_SS);
 603                 union ccb *ccb;
 604
 605                 if (bootverbose) {
 606                         if (((status & SATA_SS_DET_MASK) == SATA_SS_DET_PHY_ONLINE) &&
 607                             ((status & SATA_SS_SPD_MASK) != SATA_SS_SPD_NO_SPEED) &&
 608                             ((status & SATA_SS_IPM_MASK) == SATA_SS_IPM_ACTIVE)) {
 609                                 device_printf(dev, "CONNECT requested\n");
 610                         } else
 611                                 device_printf(dev, "DISCONNECT requested\n");
 612                 }
 613                 mvs_reset(dev);
 614                 if ((ccb = xpt_alloc_ccb_nowait()) == NULL)
 615                         return;
 616                 if (xpt_create_path(&ccb->ccb_h.path, NULL,
 617                     cam_sim_path(ch->sim),
 618                     CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
 619                         xpt_free_ccb(ccb);
 620                         return;
 621                 }
 622                 xpt_rescan(ccb);
 623         }
 624 }
 625
 626 static void
 627 mvs_notify_events(device_t dev)
 628 {
 629         struct mvs_channel *ch = device_get_softc(dev);
 630         struct cam_path *dpath;
 631         uint32_t fis;
 632         int d;
 633
 634         /* Try to read PMP field from SDB FIS. Present only for Gen-IIe. */
 635         fis = ATA_INL(ch->r_mem, SATA_FISDW0);
 636         if ((fis & 0x80ff) == 0x80a1)
 637                 d = (fis & 0x0f00) >> 8;
 638         else
 639                 d = ch->pm_present ? 15 : 0;
 640         if (bootverbose)
 641                 device_printf(dev, "SNTF %d\n", d);
 642         if (xpt_create_path(&dpath, NULL,
 643             xpt_path_path_id(ch->path), d, 0) == CAM_REQ_CMP) {
 644                 xpt_async(AC_SCSI_AEN, dpath, NULL);
 645                 xpt_free_path(dpath);
 646         }
 647 }
 648
 649 static void
 650 mvs_ch_intr_locked(void *data)
 651 {
 652         struct mvs_intr_arg *arg = (struct mvs_intr_arg *)data;
 653         device_t dev = (device_t)arg->arg;
 654         struct mvs_channel *ch = device_get_softc(dev);
 655
 656         mtx_lock(&ch->mtx);
 657         xpt_batch_start(ch->sim);
 658         mvs_ch_intr(data);
 659         xpt_batch_done(ch->sim);
 660         mtx_unlock(&ch->mtx);
 661 }
 662
 663 static void
 664 mvs_ch_pm(void *arg)
 665 {
 666         device_t dev = (device_t)arg;
 667         struct mvs_channel *ch = device_get_softc(dev);
 668         uint32_t work;
 669
 670         if (ch->numrslots != 0)
 671                 return;
 672         /* If we are idle - request power state transition. */
 673         work = ATA_INL(ch->r_mem, SATA_SC);
 674         work &= ~SATA_SC_SPM_MASK;
 675         if (ch->pm_level == 4)
 676                 work |= SATA_SC_SPM_PARTIAL;
 677         else
 678                 work |= SATA_SC_SPM_SLUMBER;
 679         ATA_OUTL(ch->r_mem, SATA_SC, work);
 680 }
 681
 682 static void
 683 mvs_ch_pm_wake(device_t dev)
 684 {
 685         struct mvs_channel *ch = device_get_softc(dev);
 686         uint32_t work;
 687         int timeout = 0;
 688
 689         work = ATA_INL(ch->r_mem, SATA_SS);
 690         if (work & SATA_SS_IPM_ACTIVE)
 691                 return;
 692         /* If we are not in active state - request power state transition. */
 693         work = ATA_INL(ch->r_mem, SATA_SC);
 694         work &= ~SATA_SC_SPM_MASK;
 695         work |= SATA_SC_SPM_ACTIVE;
 696         ATA_OUTL(ch->r_mem, SATA_SC, work);
 697         /* Wait for transition to happen. */
 698         while ((ATA_INL(ch->r_mem, SATA_SS) & SATA_SS_IPM_ACTIVE) == 0 &&
 699             timeout++ < 100) {
 700                 DELAY(100);
 701         }
 702 }
 703
 704 static void
 705 mvs_ch_intr(void *data)
 706 {
 707         struct mvs_intr_arg *arg = (struct mvs_intr_arg *)data;
 708         device_t dev = (device_t)arg->arg;
 709         struct mvs_channel *ch = device_get_softc(dev);
 710         uint32_t iec, serr = 0, fisic = 0;
 711         enum mvs_err_type et;
 712         int i, ccs, port = -1, selfdis = 0;
 713         int edma = (ch->numtslots != 0 || ch->numdslots != 0);
 714
 715         /* New item in response queue. */
 716         if ((arg->cause & 2) && edma)
 717                 mvs_crbq_intr(dev);
 718         /* Some error or special event. */
 719         if (arg->cause & 1) {
 720                 iec = ATA_INL(ch->r_mem, EDMA_IEC);
 721                 if (iec & EDMA_IE_SERRINT) {
 722                         serr = ATA_INL(ch->r_mem, SATA_SE);
 723                         ATA_OUTL(ch->r_mem, SATA_SE, serr);
 724                 }
 725                 /* EDMA self-disabled due to error. */
 726                 if (iec & EDMA_IE_ESELFDIS)
 727                         selfdis = 1;
 728                 /* Transport interrupt. */
 729                 if (iec & EDMA_IE_ETRANSINT) {
 730                         /* For Gen-I this bit means self-disable. */
 731                         if (ch->quirks & MVS_Q_GENI)
 732                                 selfdis = 1;
 733                         /* For Gen-II this bit means SDB-N. */
 734                         else if (ch->quirks & MVS_Q_GENII)
 735                                 fisic = SATA_FISC_FISWAIT4HOSTRDYEN_B1;
 736                         else    /* For Gen-IIe - read FIS interrupt cause. */
 737                                 fisic = ATA_INL(ch->r_mem, SATA_FISIC);
 738                 }
 739                 if (selfdis)
 740                         ch->curr_mode = MVS_EDMA_UNKNOWN;
 741                 ATA_OUTL(ch->r_mem, EDMA_IEC, ~iec);
 742                 /* Interface errors or Device error. */
 743                 if (iec & (0xfc1e9000 | EDMA_IE_EDEVERR)) {
 744                         port = -1;
 745                         if (ch->numpslots != 0) {
 746                                 ccs = 0;
 747                         } else {
 748                                 if (ch->quirks & MVS_Q_GENIIE)
 749                                         ccs = EDMA_S_EIOID(ATA_INL(ch->r_mem, EDMA_S));
 750                                 else
 751                                         ccs = EDMA_S_EDEVQUETAG(ATA_INL(ch->r_mem, EDMA_S));
 752                                 /* Check if error is one-PMP-port-specific, */
 753                                 if (ch->fbs_enabled) {
 754                                         /* Which ports were active. */
 755                                         for (i = 0; i < 16; i++) {
 756                                                 if (ch->numrslotspd[i] == 0)
 757                                                         continue;
 758                                                 if (port == -1)
 759                                                         port = i;
 760                                                 else if (port != i) {
 761                                                         port = -2;
 762                                                         break;
 763                                                 }
 764                                         }
 765                                         /* If several ports were active and EDMA still enabled -
 766                                          * other ports are probably unaffected and may continue.
 767                                          */
 768                                         if (port == -2 && !selfdis) {
 769                                                 uint16_t p = ATA_INL(ch->r_mem, SATA_SATAITC) >> 16;
 770                                                 port = ffs(p) - 1;
 771                                                 if (port != (fls(p) - 1))
 772                                                         port = -2;
 773                                         }
 774                                 }
 775                         }
 776                         mvs_requeue_frozen(dev);
 777                         for (i = 0; i < MVS_MAX_SLOTS; i++) {
 778                                 /* XXX: reqests in loading state. */
 779                                 if (((ch->rslots >> i) & 1) == 0)
 780                                         continue;
 781                                 if (port >= 0 &&
 782                                     ch->slot[i].ccb->ccb_h.target_id != port)
 783                                         continue;
 784                                 if (iec & EDMA_IE_EDEVERR) { /* Device error. */
 785                                     if (port != -2) {
 786                                         if (ch->numtslots == 0) {
 787                                                 /* Untagged operation. */
 788                                                 if (i == ccs)
 789                                                         et = MVS_ERR_TFE;
 790                                                 else
 791                                                         et = MVS_ERR_INNOCENT;
 792                                         } else {
 793                                                 /* Tagged operation. */
 794                                                 et = MVS_ERR_NCQ;
 795                                         }
 796                                     } else {
 797                                         et = MVS_ERR_TFE;
 798                                         ch->fatalerr = 1;
 799                                     }
 800                                 } else if (iec & 0xfc1e9000) {
 801                                         if (ch->numtslots == 0 &&
 802                                             i != ccs && port != -2)
 803                                                 et = MVS_ERR_INNOCENT;
 804                                         else
 805                                                 et = MVS_ERR_SATA;
 806                                 } else
 807                                         et = MVS_ERR_INVALID;
 808                                 mvs_end_transaction(&ch->slot[i], et);
 809                         }
 810                 }
 811                 /* Process SDB-N. */
 812                 if (fisic & SATA_FISC_FISWAIT4HOSTRDYEN_B1)
 813                         mvs_notify_events(dev);
 814                 if (fisic)
 815                         ATA_OUTL(ch->r_mem, SATA_FISIC, ~fisic);
 816                 /* Process hot-plug. */
 817                 if ((iec & (EDMA_IE_EDEVDIS | EDMA_IE_EDEVCON)) ||
 818                     (serr & SATA_SE_PHY_CHANGED))
 819                         mvs_phy_check_events(dev, serr);
 820         }
 821         /* Legacy mode device interrupt. */
 822         if ((arg->cause & 2) && !edma)
 823                 mvs_legacy_intr(dev, arg->cause & 4);
 824 }
 825
 826 static uint8_t
 827 mvs_getstatus(device_t dev, int clear)
 828 {
 829         struct mvs_channel *ch = device_get_softc(dev);
 830         uint8_t status = ATA_INB(ch->r_mem, clear ? ATA_STATUS : ATA_ALTSTAT);
 831
 832         if (ch->fake_busy) {
 833                 if (status & (ATA_S_BUSY | ATA_S_DRQ | ATA_S_ERROR))
 834                         ch->fake_busy = 0;
 835                 else
 836                         status |= ATA_S_BUSY;
 837         }
 838         return (status);
 839 }
 840
 841 static void
 842 mvs_legacy_intr(device_t dev, int poll)
 843 {
 844         struct mvs_channel *ch = device_get_softc(dev);
 845         struct mvs_slot *slot = &ch->slot[0]; /* PIO is always in slot 0. */
 846         union ccb *ccb = slot->ccb;
 847         enum mvs_err_type et = MVS_ERR_NONE;
 848         int port;
 849         u_int length, resid, size;
 850         uint8_t buf[2];
 851         uint8_t status, ireason;
 852
 853         /* Clear interrupt and get status. */
 854         status = mvs_getstatus(dev, 1);
 855         if (slot->state < MVS_SLOT_RUNNING)
 856             return;
 857         port = ccb->ccb_h.target_id & 0x0f;
 858         /* Wait a bit for late !BUSY status update. */
 859         if (status & ATA_S_BUSY) {
 860                 if (poll)
 861                         return;
 862                 DELAY(100);
 863                 if ((status = mvs_getstatus(dev, 1)) & ATA_S_BUSY) {
 864                         DELAY(1000);
 865                         if ((status = mvs_getstatus(dev, 1)) & ATA_S_BUSY)
 866                                 return;
 867                 }
 868         }
 869         /* If we got an error, we are done. */
 870         if (status & ATA_S_ERROR) {
 871                 et = MVS_ERR_TFE;
 872                 goto end_finished;
 873         }
 874         if (ccb->ccb_h.func_code == XPT_ATA_IO) { /* ATA PIO */
 875                 ccb->ataio.res.status = status;
 876                 /* Are we moving data? */
 877                 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
 878                     /* If data read command - get them. */
 879                     if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
 880                         if (mvs_wait(dev, ATA_S_DRQ, ATA_S_BUSY, 1000) < 0) {
 881                             device_printf(dev, "timeout waiting for read DRQ\n");
 882                             et = MVS_ERR_TIMEOUT;
 883                             xpt_freeze_simq(ch->sim, 1);
 884                             ch->toslots |= (1 << slot->slot);
 885                             goto end_finished;
 886                         }
 887                         ATA_INSW_STRM(ch->r_mem, ATA_DATA,
 888                            (uint16_t *)(ccb->ataio.data_ptr + ch->donecount),
 889                            ch->transfersize / 2);
 890                     }
 891                     /* Update how far we've gotten. */
 892                     ch->donecount += ch->transfersize;
 893                     /* Do we need more? */
 894                     if (ccb->ataio.dxfer_len > ch->donecount) {
 895                         /* Set this transfer size according to HW capabilities */
 896                         ch->transfersize = min(ccb->ataio.dxfer_len - ch->donecount,
 897                             ch->curr[ccb->ccb_h.target_id].bytecount);
 898                         /* If data write command - put them */
 899                         if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT) {
 900                                 if (mvs_wait(dev, ATA_S_DRQ, ATA_S_BUSY, 1000) < 0) {
 901                                     device_printf(dev,
 902                                         "timeout waiting for write DRQ\n");
 903                                     et = MVS_ERR_TIMEOUT;
 904                                     xpt_freeze_simq(ch->sim, 1);
 905                                     ch->toslots |= (1 << slot->slot);
 906                                     goto end_finished;
 907                                 }
 908                                 ATA_OUTSW_STRM(ch->r_mem, ATA_DATA,
 909                                    (uint16_t *)(ccb->ataio.data_ptr + ch->donecount),
 910                                    ch->transfersize / 2);
 911                                 return;
 912                         }
 913                         /* If data read command, return & wait for interrupt */
 914                         if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN)
 915                                 return;
 916                     }
 917                 }
 918         } else if (ch->basic_dma) {     /* ATAPI DMA */
 919                 if (status & ATA_S_DWF)
 920                         et = MVS_ERR_TFE;
 921                 else if (ATA_INL(ch->r_mem, DMA_S) & DMA_S_ERR)
 922                         et = MVS_ERR_TFE;
 923                 /* Stop basic DMA. */
 924                 ATA_OUTL(ch->r_mem, DMA_C, 0);
 925                 goto end_finished;
 926         } else {                        /* ATAPI PIO */
 927                 length = ATA_INB(ch->r_mem,ATA_CYL_LSB) |
 928                     (ATA_INB(ch->r_mem,ATA_CYL_MSB) << 8);
 929                 size = min(ch->transfersize, length);
 930                 ireason = ATA_INB(ch->r_mem,ATA_IREASON);
 931                 switch ((ireason & (ATA_I_CMD | ATA_I_IN)) |
 932                         (status & ATA_S_DRQ)) {
 933
 934                 case ATAPI_P_CMDOUT:
 935                     device_printf(dev, "ATAPI CMDOUT\n");
 936                     /* Return wait for interrupt */
 937                     return;
 938
 939                 case ATAPI_P_WRITE:
 940                     if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
 941                         device_printf(dev, "trying to write on read buffer\n");
 942                         et = MVS_ERR_TFE;
 943                         goto end_finished;
 944                         break;
 945                     }
 946                     ATA_OUTSW_STRM(ch->r_mem, ATA_DATA,
 947                         (uint16_t *)(ccb->csio.data_ptr + ch->donecount),
 948                         (size + 1) / 2);
 949                     for (resid = ch->transfersize + (size & 1);
 950                         resid < length; resid += sizeof(int16_t))
 951                             ATA_OUTW(ch->r_mem, ATA_DATA, 0);
 952                     ch->donecount += length;
 953                     /* Set next transfer size according to HW capabilities */
 954                     ch->transfersize = min(ccb->csio.dxfer_len - ch->donecount,
 955                             ch->curr[ccb->ccb_h.target_id].bytecount);
 956                     /* Return wait for interrupt */
 957                     return;
 958
 959                 case ATAPI_P_READ:
 960                     if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT) {
 961                         device_printf(dev, "trying to read on write buffer\n");
 962                         et = MVS_ERR_TFE;
 963                         goto end_finished;
 964                     }
 965                     if (size >= 2) {
 966                         ATA_INSW_STRM(ch->r_mem, ATA_DATA,
 967                             (uint16_t *)(ccb->csio.data_ptr + ch->donecount),
 968                             size / 2);
 969                     }
 970                     if (size & 1) {
 971                         ATA_INSW_STRM(ch->r_mem, ATA_DATA, (void*)buf, 1);
 972                         ((uint8_t *)ccb->csio.data_ptr + ch->donecount +
 973                             (size & ~1))[0] = buf[0];
 974                     }
 975                     for (resid = ch->transfersize + (size & 1);
 976                         resid < length; resid += sizeof(int16_t))
 977                             ATA_INW(ch->r_mem, ATA_DATA);
 978                     ch->donecount += length;
 979                     /* Set next transfer size according to HW capabilities */
 980                     ch->transfersize = min(ccb->csio.dxfer_len - ch->donecount,
 981                             ch->curr[ccb->ccb_h.target_id].bytecount);
 982                     /* Return wait for interrupt */
 983                     return;
 984
 985                 case ATAPI_P_DONEDRQ:
 986                     device_printf(dev,
 987                           "WARNING - DONEDRQ non conformant device\n");
 988                     if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
 989                         ATA_INSW_STRM(ch->r_mem, ATA_DATA,
 990                             (uint16_t *)(ccb->csio.data_ptr + ch->donecount),
 991                             length / 2);
 992                         ch->donecount += length;
 993                     }
 994                     else if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT) {
 995                         ATA_OUTSW_STRM(ch->r_mem, ATA_DATA,
 996                             (uint16_t *)(ccb->csio.data_ptr + ch->donecount),
 997                             length / 2);
 998                         ch->donecount += length;
 999                     }
1000                     else
1001                         et = MVS_ERR_TFE;
1002                     /* FALLTHROUGH */
1003
1004                 case ATAPI_P_ABORT:
1005                 case ATAPI_P_DONE:
1006                     if (status & (ATA_S_ERROR | ATA_S_DWF))
1007                         et = MVS_ERR_TFE;
1008                     goto end_finished;
1009
1010                 default:
1011                     device_printf(dev, "unknown transfer phase"
1012                         " (status %02x, ireason %02x)\n",
1013                         status, ireason);
1014                     et = MVS_ERR_TFE;
1015                 }
1016         }
1017
1018 end_finished:
1019         mvs_end_transaction(slot, et);
1020 }
1021
1022 static void
1023 mvs_crbq_intr(device_t dev)
1024 {
1025         struct mvs_channel *ch = device_get_softc(dev);
1026         struct mvs_crpb *crpb;
1027         union ccb *ccb;
1028         int in_idx, fin_idx, cin_idx, slot;
1029         uint32_t val;
1030         uint16_t flags;
1031
1032         val = ATA_INL(ch->r_mem, EDMA_RESQIP);
1033         if (val == 0)
1034                 val = ATA_INL(ch->r_mem, EDMA_RESQIP);
1035         in_idx = (val & EDMA_RESQP_ERPQP_MASK) >>
1036             EDMA_RESQP_ERPQP_SHIFT;
1037         bus_dmamap_sync(ch->dma.workrp_tag, ch->dma.workrp_map,
1038             BUS_DMASYNC_POSTREAD);
1039         fin_idx = cin_idx = ch->in_idx;
1040         ch->in_idx = in_idx;
1041         while (in_idx != cin_idx) {
1042                 crpb = (struct mvs_crpb *)
1043                     (ch->dma.workrp + MVS_CRPB_OFFSET +
1044                     (MVS_CRPB_SIZE * cin_idx));
1045                 slot = le16toh(crpb->id) & MVS_CRPB_TAG_MASK;
1046                 flags = le16toh(crpb->rspflg);
1047                 /*
1048                  * Handle only successfull completions here.
1049                  * Errors will be handled by main intr handler.
1050                  */
1051 #if defined(__i386__) || defined(__amd64__)
1052                 if (crpb->id == 0xffff && crpb->rspflg == 0xffff) {
1053                         device_printf(dev, "Unfilled CRPB "
1054                             "%d (%d->%d) tag %d flags %04x rs %08x\n",
1055                             cin_idx, fin_idx, in_idx, slot, flags, ch->rslots);
1056                 } else
1057 #endif
1058                 if (ch->numtslots != 0 ||
1059                     (flags & EDMA_IE_EDEVERR) == 0) {
1060 #if defined(__i386__) || defined(__amd64__)
1061                         crpb->id = 0xffff;
1062                         crpb->rspflg = 0xffff;
1063 #endif
1064                         if (ch->slot[slot].state >= MVS_SLOT_RUNNING) {
1065                                 ccb = ch->slot[slot].ccb;
1066                                 ccb->ataio.res.status =
1067                                     (flags & MVS_CRPB_ATASTS_MASK) >>
1068                                     MVS_CRPB_ATASTS_SHIFT;
1069                                 mvs_end_transaction(&ch->slot[slot], MVS_ERR_NONE);
1070                         } else {
1071                                 device_printf(dev, "Unused tag in CRPB "
1072                                     "%d (%d->%d) tag %d flags %04x rs %08x\n",
1073                                     cin_idx, fin_idx, in_idx, slot, flags,
1074                                     ch->rslots);
1075                         }
1076                 } else {
1077                         device_printf(dev,
1078                             "CRPB with error %d tag %d flags %04x\n",
1079                             cin_idx, slot, flags);
1080                 }
1081                 cin_idx = (cin_idx + 1) & (MVS_MAX_SLOTS - 1);
1082         }
1083         bus_dmamap_sync(ch->dma.workrp_tag, ch->dma.workrp_map,
1084             BUS_DMASYNC_PREREAD);
1085         if (cin_idx == ch->in_idx) {
1086                 ATA_OUTL(ch->r_mem, EDMA_RESQOP,
1087                     ch->dma.workrp_bus | (cin_idx << EDMA_RESQP_ERPQP_SHIFT));
1088         }
1089 }
1090
1091 /* Must be called with channel locked. */
1092 static int
1093 mvs_check_collision(device_t dev, union ccb *ccb)
1094 {
1095         struct mvs_channel *ch = device_get_softc(dev);
1096
1097         if (ccb->ccb_h.func_code == XPT_ATA_IO) {
1098                 /* NCQ DMA */
1099                 if (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA) {
1100                         /* Can't mix NCQ and non-NCQ DMA commands. */
1101                         if (ch->numdslots != 0)
1102                                 return (1);
1103                         /* Can't mix NCQ and PIO commands. */
1104                         if (ch->numpslots != 0)
1105                                 return (1);
1106                         /* If we have no FBS */
1107                         if (!ch->fbs_enabled) {
1108                                 /* Tagged command while tagged to other target is active. */
1109                                 if (ch->numtslots != 0 &&
1110                                     ch->taggedtarget != ccb->ccb_h.target_id)
1111                                         return (1);
1112                         }
1113                 /* Non-NCQ DMA */
1114                 } else if (ccb->ataio.cmd.flags & CAM_ATAIO_DMA) {
1115                         /* Can't mix non-NCQ DMA and NCQ commands. */
1116                         if (ch->numtslots != 0)
1117                                 return (1);
1118                         /* Can't mix non-NCQ DMA and PIO commands. */
1119                         if (ch->numpslots != 0)
1120                                 return (1);
1121                 /* PIO */
1122                 } else {
1123                         /* Can't mix PIO with anything. */
1124                         if (ch->numrslots != 0)
1125                                 return (1);
1126                 }
1127                 if (ccb->ataio.cmd.flags & (CAM_ATAIO_CONTROL | CAM_ATAIO_NEEDRESULT)) {
1128                         /* Atomic command while anything active. */
1129                         if (ch->numrslots != 0)
1130                                 return (1);
1131                 }
1132         } else { /* ATAPI */
1133                 /* ATAPI goes without EDMA, so can't mix it with anything. */
1134                 if (ch->numrslots != 0)
1135                         return (1);
1136         }
1137         /* We have some atomic command running. */
1138         if (ch->aslots != 0)
1139                 return (1);
1140         return (0);
1141 }
1142
1143 static void
1144 mvs_tfd_read(device_t dev, union ccb *ccb)
1145 {
1146         struct mvs_channel *ch = device_get_softc(dev);
1147         struct ata_res *res = &ccb->ataio.res;
1148
1149         res->status = ATA_INB(ch->r_mem, ATA_ALTSTAT);
1150         res->error =  ATA_INB(ch->r_mem, ATA_ERROR);
1151         res->device = ATA_INB(ch->r_mem, ATA_DRIVE);
1152         ATA_OUTB(ch->r_mem, ATA_CONTROL, ATA_A_HOB);
1153         res->sector_count_exp = ATA_INB(ch->r_mem, ATA_COUNT);
1154         res->lba_low_exp = ATA_INB(ch->r_mem, ATA_SECTOR);
1155         res->lba_mid_exp = ATA_INB(ch->r_mem, ATA_CYL_LSB);
1156         res->lba_high_exp = ATA_INB(ch->r_mem, ATA_CYL_MSB);
1157         ATA_OUTB(ch->r_mem, ATA_CONTROL, 0);
1158         res->sector_count = ATA_INB(ch->r_mem, ATA_COUNT);
1159         res->lba_low = ATA_INB(ch->r_mem, ATA_SECTOR);
1160         res->lba_mid = ATA_INB(ch->r_mem, ATA_CYL_LSB);
1161         res->lba_high = ATA_INB(ch->r_mem, ATA_CYL_MSB);
1162 }
1163
1164 static void
1165 mvs_tfd_write(device_t dev, union ccb *ccb)
1166 {
1167         struct mvs_channel *ch = device_get_softc(dev);
1168         struct ata_cmd *cmd = &ccb->ataio.cmd;
1169
1170         ATA_OUTB(ch->r_mem, ATA_DRIVE, cmd->device);
1171         ATA_OUTB(ch->r_mem, ATA_CONTROL, cmd->control);
1172         ATA_OUTB(ch->r_mem, ATA_FEATURE, cmd->features_exp);
1173         ATA_OUTB(ch->r_mem, ATA_FEATURE, cmd->features);
1174         ATA_OUTB(ch->r_mem, ATA_COUNT, cmd->sector_count_exp);
1175         ATA_OUTB(ch->r_mem, ATA_COUNT, cmd->sector_count);
1176         ATA_OUTB(ch->r_mem, ATA_SECTOR, cmd->lba_low_exp);
1177         ATA_OUTB(ch->r_mem, ATA_SECTOR, cmd->lba_low);
1178         ATA_OUTB(ch->r_mem, ATA_CYL_LSB, cmd->lba_mid_exp);
1179         ATA_OUTB(ch->r_mem, ATA_CYL_LSB, cmd->lba_mid);
1180         ATA_OUTB(ch->r_mem, ATA_CYL_MSB, cmd->lba_high_exp);
1181         ATA_OUTB(ch->r_mem, ATA_CYL_MSB, cmd->lba_high);
1182         ATA_OUTB(ch->r_mem, ATA_COMMAND, cmd->command);
1183 }
1184
1185
1186 /* Must be called with channel locked. */
1187 static void
1188 mvs_begin_transaction(device_t dev, union ccb *ccb)
1189 {
1190         struct mvs_channel *ch = device_get_softc(dev);
1191         struct mvs_slot *slot;
1192         int slotn, tag;
1193
1194         if (ch->pm_level > 0)
1195                 mvs_ch_pm_wake(dev);
1196         /* Softreset is a special case. */
1197         if (ccb->ccb_h.func_code == XPT_ATA_IO &&
1198             (ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL)) {
1199                 mvs_softreset(dev, ccb);
1200                 return;
1201         }
1202         /* Choose empty slot. */
1203         slotn = ffs(~ch->oslots) - 1;
1204         if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
1205             (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) {
1206                 if (ch->quirks & MVS_Q_GENIIE)
1207                         tag = ffs(~ch->otagspd[ccb->ccb_h.target_id]) - 1;
1208                 else
1209                         tag = slotn;
1210         } else
1211                 tag = 0;
1212         /* Occupy chosen slot. */
1213         slot = &ch->slot[slotn];
1214         slot->ccb = ccb;
1215         slot->tag = tag;
1216         /* Stop PM timer. */
1217         if (ch->numrslots == 0 && ch->pm_level > 3)
1218                 callout_stop(&ch->pm_timer);
1219         /* Update channel stats. */
1220         ch->oslots |= (1 << slot->slot);
1221         ch->numrslots++;
1222         ch->numrslotspd[ccb->ccb_h.target_id]++;
1223         if (ccb->ccb_h.func_code == XPT_ATA_IO) {
1224                 if (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA) {
1225                         ch->otagspd[ccb->ccb_h.target_id] |= (1 << slot->tag);
1226                         ch->numtslots++;
1227                         ch->numtslotspd[ccb->ccb_h.target_id]++;
1228                         ch->taggedtarget = ccb->ccb_h.target_id;
1229                         mvs_set_edma_mode(dev, MVS_EDMA_NCQ);
1230                 } else if (ccb->ataio.cmd.flags & CAM_ATAIO_DMA) {
1231                         ch->numdslots++;
1232                         mvs_set_edma_mode(dev, MVS_EDMA_ON);
1233                 } else {
1234                         ch->numpslots++;
1235                         mvs_set_edma_mode(dev, MVS_EDMA_OFF);
1236                 }
1237                 if (ccb->ataio.cmd.flags &
1238                     (CAM_ATAIO_CONTROL | CAM_ATAIO_NEEDRESULT)) {
1239                         ch->aslots |= (1 << slot->slot);
1240                 }
1241         } else {
1242                 uint8_t *cdb = (ccb->ccb_h.flags & CAM_CDB_POINTER) ?
1243                     ccb->csio.cdb_io.cdb_ptr : ccb->csio.cdb_io.cdb_bytes;
1244                 ch->numpslots++;
1245                 /* Use ATAPI DMA only for commands without under-/overruns. */
1246                 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE &&
1247                     ch->curr[ccb->ccb_h.target_id].mode >= ATA_DMA &&
1248                     (ch->quirks & MVS_Q_SOC) == 0 &&
1249                     (cdb[0] == 0x08 ||
1250                      cdb[0] == 0x0a ||
1251                      cdb[0] == 0x28 ||
1252                      cdb[0] == 0x2a ||
1253                      cdb[0] == 0x88 ||
1254                      cdb[0] == 0x8a ||
1255                      cdb[0] == 0xa8 ||
1256                      cdb[0] == 0xaa ||
1257                      cdb[0] == 0xbe)) {
1258                         ch->basic_dma = 1;
1259                 }
1260                 mvs_set_edma_mode(dev, MVS_EDMA_OFF);
1261         }
1262         if (ch->numpslots == 0 || ch->basic_dma) {
1263                 slot->state = MVS_SLOT_LOADING;
1264                 bus_dmamap_load_ccb(ch->dma.data_tag, slot->dma.data_map,
1265                     ccb, mvs_dmasetprd, slot, 0);
1266         } else
1267                 mvs_legacy_execute_transaction(slot);
1268 }
1269
1270 /* Locked by busdma engine. */
1271 static void
1272 mvs_dmasetprd(void *arg, bus_dma_segment_t *segs, int nsegs, int error)
1273 {
1274         struct mvs_slot *slot = arg;
1275         struct mvs_channel *ch = device_get_softc(slot->dev);
1276         struct mvs_eprd *eprd;
1277         int i;
1278
1279         if (error) {
1280                 device_printf(slot->dev, "DMA load error\n");
1281                 mvs_end_transaction(slot, MVS_ERR_INVALID);
1282                 return;
1283         }
1284         KASSERT(nsegs <= MVS_SG_ENTRIES, ("too many DMA segment entries\n"));
1285         /* If there is only one segment - no need to use S/G table on Gen-IIe. */
1286         if (nsegs == 1 && ch->basic_dma == 0 && (ch->quirks & MVS_Q_GENIIE)) {
1287                 slot->dma.addr = segs[0].ds_addr;
1288                 slot->dma.len = segs[0].ds_len;
1289         } else {
1290                 slot->dma.addr = 0;
1291                 /* Get a piece of the workspace for this EPRD */
1292                 eprd = (struct mvs_eprd *)
1293                     (ch->dma.workrq + MVS_EPRD_OFFSET + (MVS_EPRD_SIZE * slot->slot));
1294                 /* Fill S/G table */
1295                 for (i = 0; i < nsegs; i++) {
1296                         eprd[i].prdbal = htole32(segs[i].ds_addr);
1297                         eprd[i].bytecount = htole32(segs[i].ds_len & MVS_EPRD_MASK);
1298                         eprd[i].prdbah = htole32((segs[i].ds_addr >> 16) >> 16);
1299                 }
1300                 eprd[i - 1].bytecount |= htole32(MVS_EPRD_EOF);
1301         }
1302         bus_dmamap_sync(ch->dma.data_tag, slot->dma.data_map,
1303             ((slot->ccb->ccb_h.flags & CAM_DIR_IN) ?
1304             BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE));
1305         if (ch->basic_dma)
1306                 mvs_legacy_execute_transaction(slot);
1307         else
1308                 mvs_execute_transaction(slot);
1309 }
1310
1311 static void
1312 mvs_legacy_execute_transaction(struct mvs_slot *slot)
1313 {
1314         device_t dev = slot->dev;
1315         struct mvs_channel *ch = device_get_softc(dev);
1316         bus_addr_t eprd;
1317         union ccb *ccb = slot->ccb;
1318         int port = ccb->ccb_h.target_id & 0x0f;
1319         int timeout;
1320
1321         slot->state = MVS_SLOT_RUNNING;
1322         ch->rslots |= (1 << slot->slot);
1323         ATA_OUTB(ch->r_mem, SATA_SATAICTL, port << SATA_SATAICTL_PMPTX_SHIFT);
1324         if (ccb->ccb_h.func_code == XPT_ATA_IO) {
1325                 mvs_tfd_write(dev, ccb);
1326                 /* Device reset doesn't interrupt. */
1327                 if (ccb->ataio.cmd.command == ATA_DEVICE_RESET) {
1328                         int timeout = 1000000;
1329                         do {
1330                             DELAY(10);
1331                             ccb->ataio.res.status = ATA_INB(ch->r_mem, ATA_STATUS);
1332                         } while (ccb->ataio.res.status & ATA_S_BUSY && timeout--);
1333                         mvs_legacy_intr(dev, 1);
1334                         return;
1335                 }
1336                 ch->donecount = 0;
1337                 ch->transfersize = min(ccb->ataio.dxfer_len,
1338                     ch->curr[port].bytecount);
1339                 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE)
1340                         ch->fake_busy = 1;
1341                 /* If data write command - output the data */
1342                 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT) {
1343                         if (mvs_wait(dev, ATA_S_DRQ, ATA_S_BUSY, 1000) < 0) {
1344                                 device_printf(dev,
1345                                     "timeout waiting for write DRQ\n");
1346                                 xpt_freeze_simq(ch->sim, 1);
1347                                 ch->toslots |= (1 << slot->slot);
1348                                 mvs_end_transaction(slot, MVS_ERR_TIMEOUT);
1349                                 return;
1350                         }
1351                         ATA_OUTSW_STRM(ch->r_mem, ATA_DATA,
1352                            (uint16_t *)(ccb->ataio.data_ptr + ch->donecount),
1353                            ch->transfersize / 2);
1354                 }
1355         } else {
1356                 ch->donecount = 0;
1357                 ch->transfersize = min(ccb->csio.dxfer_len,
1358                     ch->curr[port].bytecount);
1359                 /* Write ATA PACKET command. */
1360                 if (ch->basic_dma) {
1361                         ATA_OUTB(ch->r_mem, ATA_FEATURE, ATA_F_DMA);
1362                         ATA_OUTB(ch->r_mem, ATA_CYL_LSB, 0);
1363                         ATA_OUTB(ch->r_mem, ATA_CYL_MSB, 0);
1364                 } else {
1365                         ATA_OUTB(ch->r_mem, ATA_FEATURE, 0);
1366                         ATA_OUTB(ch->r_mem, ATA_CYL_LSB, ch->transfersize);
1367                         ATA_OUTB(ch->r_mem, ATA_CYL_MSB, ch->transfersize >> 8);
1368                 }
1369                 ATA_OUTB(ch->r_mem, ATA_COMMAND, ATA_PACKET_CMD);
1370                 ch->fake_busy = 1;
1371                 /* Wait for ready to write ATAPI command block */
1372                 if (mvs_wait(dev, 0, ATA_S_BUSY, 1000) < 0) {
1373                         device_printf(dev, "timeout waiting for ATAPI !BUSY\n");
1374                         xpt_freeze_simq(ch->sim, 1);
1375                         ch->toslots |= (1 << slot->slot);
1376                         mvs_end_transaction(slot, MVS_ERR_TIMEOUT);
1377                         return;
1378                 }
1379                 timeout = 5000;
1380                 while (timeout--) {
1381                     int reason = ATA_INB(ch->r_mem, ATA_IREASON);
1382                     int status = ATA_INB(ch->r_mem, ATA_STATUS);
1383
1384                     if (((reason & (ATA_I_CMD | ATA_I_IN)) |
1385                          (status & (ATA_S_DRQ | ATA_S_BUSY))) == ATAPI_P_CMDOUT)
1386                         break;
1387                     DELAY(20);
1388                 }
1389                 if (timeout <= 0) {
1390                         device_printf(dev,
1391                             "timeout waiting for ATAPI command ready\n");
1392                         xpt_freeze_simq(ch->sim, 1);
1393                         ch->toslots |= (1 << slot->slot);
1394                         mvs_end_transaction(slot, MVS_ERR_TIMEOUT);
1395                         return;
1396                 }
1397                 /* Write ATAPI command. */
1398                 ATA_OUTSW_STRM(ch->r_mem, ATA_DATA,
1399                    (uint16_t *)((ccb->ccb_h.flags & CAM_CDB_POINTER) ?
1400                     ccb->csio.cdb_io.cdb_ptr : ccb->csio.cdb_io.cdb_bytes),
1401                    ch->curr[port].atapi / 2);
1402                 DELAY(10);
1403                 if (ch->basic_dma) {
1404                         /* Start basic DMA. */
1405                         eprd = ch->dma.workrq_bus + MVS_EPRD_OFFSET +
1406                             (MVS_EPRD_SIZE * slot->slot);
1407                         ATA_OUTL(ch->r_mem, DMA_DTLBA, eprd);
1408                         ATA_OUTL(ch->r_mem, DMA_DTHBA, (eprd >> 16) >> 16);
1409                         ATA_OUTL(ch->r_mem, DMA_C, DMA_C_START |
1410                             (((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) ?
1411                             DMA_C_READ : 0));
1412                 }
1413         }
1414         /* Start command execution timeout */
1415         callout_reset(&slot->timeout, (int)ccb->ccb_h.timeout * hz / 1000,
1416             (timeout_t*)mvs_timeout, slot);
1417 }
1418
1419 /* Must be called with channel locked. */
1420 static void
1421 mvs_execute_transaction(struct mvs_slot *slot)
1422 {
1423         device_t dev = slot->dev;
1424         struct mvs_channel *ch = device_get_softc(dev);
1425         bus_addr_t eprd;
1426         struct mvs_crqb *crqb;
1427         struct mvs_crqb_gen2e *crqb2e;
1428         union ccb *ccb = slot->ccb;
1429         int port = ccb->ccb_h.target_id & 0x0f;
1430         int i;
1431
1432         /* Get address of the prepared EPRD */
1433         eprd = ch->dma.workrq_bus + MVS_EPRD_OFFSET + (MVS_EPRD_SIZE * slot->slot);
1434         /* Prepare CRQB. Gen IIe uses different CRQB format. */
1435         if (ch->quirks & MVS_Q_GENIIE) {
1436                 crqb2e = (struct mvs_crqb_gen2e *)
1437                     (ch->dma.workrq + MVS_CRQB_OFFSET + (MVS_CRQB_SIZE * ch->out_idx));
1438                 crqb2e->ctrlflg = htole32(
1439                     ((ccb->ccb_h.flags & CAM_DIR_IN) ? MVS_CRQB2E_READ : 0) |
1440                     (slot->tag << MVS_CRQB2E_DTAG_SHIFT) |
1441                     (port << MVS_CRQB2E_PMP_SHIFT) |
1442                     (slot->slot << MVS_CRQB2E_HTAG_SHIFT));
1443                 /* If there is only one segment - no need to use S/G table. */
1444                 if (slot->dma.addr != 0) {
1445                         eprd = slot->dma.addr;
1446                         crqb2e->ctrlflg |= htole32(MVS_CRQB2E_CPRD);
1447                         crqb2e->drbc = slot->dma.len;
1448                 }
1449                 crqb2e->cprdbl = htole32(eprd);
1450                 crqb2e->cprdbh = htole32((eprd >> 16) >> 16);
1451                 crqb2e->cmd[0] = 0;
1452                 crqb2e->cmd[1] = 0;
1453                 crqb2e->cmd[2] = ccb->ataio.cmd.command;
1454                 crqb2e->cmd[3] = ccb->ataio.cmd.features;
1455                 crqb2e->cmd[4] = ccb->ataio.cmd.lba_low;
1456                 crqb2e->cmd[5] = ccb->ataio.cmd.lba_mid;
1457                 crqb2e->cmd[6] = ccb->ataio.cmd.lba_high;
1458                 crqb2e->cmd[7] = ccb->ataio.cmd.device;
1459                 crqb2e->cmd[8] = ccb->ataio.cmd.lba_low_exp;
1460                 crqb2e->cmd[9] = ccb->ataio.cmd.lba_mid_exp;
1461                 crqb2e->cmd[10] = ccb->ataio.cmd.lba_high_exp;
1462                 crqb2e->cmd[11] = ccb->ataio.cmd.features_exp;
1463                 if (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA) {
1464                         crqb2e->cmd[12] = slot->tag << 3;
1465                         crqb2e->cmd[13] = 0;
1466                 } else {
1467                         crqb2e->cmd[12] = ccb->ataio.cmd.sector_count;
1468                         crqb2e->cmd[13] = ccb->ataio.cmd.sector_count_exp;
1469                 }
1470                 crqb2e->cmd[14] = 0;
1471                 crqb2e->cmd[15] = 0;
1472         } else {
1473                 crqb = (struct mvs_crqb *)
1474                     (ch->dma.workrq + MVS_CRQB_OFFSET + (MVS_CRQB_SIZE * ch->out_idx));
1475                 crqb->cprdbl = htole32(eprd);
1476                 crqb->cprdbh = htole32((eprd >> 16) >> 16);
1477                 crqb->ctrlflg = htole16(
1478                     ((ccb->ccb_h.flags & CAM_DIR_IN) ? MVS_CRQB_READ : 0) |
1479                     (slot->slot << MVS_CRQB_TAG_SHIFT) |
1480                     (port << MVS_CRQB_PMP_SHIFT));
1481                 i = 0;
1482                 /*
1483                  * Controller can handle only 11 of 12 ATA registers,
1484                  * so we have to choose which one to skip.
1485                  */
1486                 if (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA) {
1487                         crqb->cmd[i++] = ccb->ataio.cmd.features_exp;
1488                         crqb->cmd[i++] = 0x11;
1489                 }
1490                 crqb->cmd[i++] = ccb->ataio.cmd.features;
1491                 crqb->cmd[i++] = 0x11;
1492                 if (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA) {
1493                         crqb->cmd[i++] = slot->tag << 3;
1494                         crqb->cmd[i++] = 0x12;
1495                 } else {
1496                         crqb->cmd[i++] = ccb->ataio.cmd.sector_count_exp;
1497                         crqb->cmd[i++] = 0x12;
1498                         crqb->cmd[i++] = ccb->ataio.cmd.sector_count;
1499                         crqb->cmd[i++] = 0x12;
1500                 }
1501                 crqb->cmd[i++] = ccb->ataio.cmd.lba_low_exp;
1502                 crqb->cmd[i++] = 0x13;
1503                 crqb->cmd[i++] = ccb->ataio.cmd.lba_low;
1504                 crqb->cmd[i++] = 0x13;
1505                 crqb->cmd[i++] = ccb->ataio.cmd.lba_mid_exp;
1506                 crqb->cmd[i++] = 0x14;
1507                 crqb->cmd[i++] = ccb->ataio.cmd.lba_mid;
1508                 crqb->cmd[i++] = 0x14;
1509                 crqb->cmd[i++] = ccb->ataio.cmd.lba_high_exp;
1510                 crqb->cmd[i++] = 0x15;
1511                 crqb->cmd[i++] = ccb->ataio.cmd.lba_high;
1512                 crqb->cmd[i++] = 0x15;
1513                 crqb->cmd[i++] = ccb->ataio.cmd.device;
1514                 crqb->cmd[i++] = 0x16;
1515                 crqb->cmd[i++] = ccb->ataio.cmd.command;
1516                 crqb->cmd[i++] = 0x97;
1517         }
1518         bus_dmamap_sync(ch->dma.workrq_tag, ch->dma.workrq_map,
1519             BUS_DMASYNC_PREWRITE);
1520         bus_dmamap_sync(ch->dma.workrp_tag, ch->dma.workrp_map,
1521             BUS_DMASYNC_PREREAD);
1522         slot->state = MVS_SLOT_RUNNING;
1523         ch->rslots |= (1 << slot->slot);
1524         /* Issue command to the controller. */
1525         ch->out_idx = (ch->out_idx + 1) & (MVS_MAX_SLOTS - 1);
1526         ATA_OUTL(ch->r_mem, EDMA_REQQIP,
1527             ch->dma.workrq_bus + MVS_CRQB_OFFSET + (MVS_CRQB_SIZE * ch->out_idx));
1528         /* Start command execution timeout */
1529         callout_reset(&slot->timeout, (int)ccb->ccb_h.timeout * hz / 1000,
1530             (timeout_t*)mvs_timeout, slot);
1531         return;
1532 }
1533
1534 /* Must be called with channel locked. */
1535 static void
1536 mvs_process_timeout(device_t dev)
1537 {
1538         struct mvs_channel *ch = device_get_softc(dev);
1539         int i;
1540
1541         mtx_assert(&ch->mtx, MA_OWNED);
1542         /* Handle the rest of commands. */
1543         for (i = 0; i < MVS_MAX_SLOTS; i++) {
1544                 /* Do we have a running request on slot? */
1545                 if (ch->slot[i].state < MVS_SLOT_RUNNING)
1546                         continue;
1547                 mvs_end_transaction(&ch->slot[i], MVS_ERR_TIMEOUT);
1548         }
1549 }
1550
1551 /* Must be called with channel locked. */
1552 static void
1553 mvs_rearm_timeout(device_t dev)
1554 {
1555         struct mvs_channel *ch = device_get_softc(dev);
1556         int i;
1557
1558         mtx_assert(&ch->mtx, MA_OWNED);
1559         for (i = 0; i < MVS_MAX_SLOTS; i++) {
1560                 struct mvs_slot *slot = &ch->slot[i];
1561
1562                 /* Do we have a running request on slot? */
1563                 if (slot->state < MVS_SLOT_RUNNING)
1564                         continue;
1565                 if ((ch->toslots & (1 << i)) == 0)
1566                         continue;
1567                 callout_reset(&slot->timeout,
1568                     (int)slot->ccb->ccb_h.timeout * hz / 2000,
1569                     (timeout_t*)mvs_timeout, slot);
1570         }
1571 }
1572
1573 /* Locked by callout mechanism. */
1574 static void
1575 mvs_timeout(struct mvs_slot *slot)
1576 {
1577         device_t dev = slot->dev;
1578         struct mvs_channel *ch = device_get_softc(dev);
1579
1580         /* Check for stale timeout. */
1581         if (slot->state < MVS_SLOT_RUNNING)
1582                 return;
1583         device_printf(dev, "Timeout on slot %d\n", slot->slot);
1584         device_printf(dev, "iec %08x sstat %08x serr %08x edma_s %08x "
1585             "dma_c %08x dma_s %08x rs %08x status %02x\n",
1586             ATA_INL(ch->r_mem, EDMA_IEC),
1587             ATA_INL(ch->r_mem, SATA_SS), ATA_INL(ch->r_mem, SATA_SE),
1588             ATA_INL(ch->r_mem, EDMA_S), ATA_INL(ch->r_mem, DMA_C),
1589             ATA_INL(ch->r_mem, DMA_S), ch->rslots,
1590             ATA_INB(ch->r_mem, ATA_ALTSTAT));
1591         /* Handle frozen command. */
1592         mvs_requeue_frozen(dev);
1593         /* We wait for other commands timeout and pray. */
1594         if (ch->toslots == 0)
1595                 xpt_freeze_simq(ch->sim, 1);
1596         ch->toslots |= (1 << slot->slot);
1597         if ((ch->rslots & ~ch->toslots) == 0)
1598                 mvs_process_timeout(dev);
1599         else
1600                 device_printf(dev, " ... waiting for slots %08x\n",
1601                     ch->rslots & ~ch->toslots);
1602 }
1603
1604 /* Must be called with channel locked. */
1605 static void
1606 mvs_end_transaction(struct mvs_slot *slot, enum mvs_err_type et)
1607 {
1608         device_t dev = slot->dev;
1609         struct mvs_channel *ch = device_get_softc(dev);
1610         union ccb *ccb = slot->ccb;
1611         int lastto;
1612
1613         bus_dmamap_sync(ch->dma.workrq_tag, ch->dma.workrq_map,
1614             BUS_DMASYNC_POSTWRITE);
1615         /* Read result registers to the result struct
1616          * May be incorrect if several commands finished same time,
1617          * so read only when sure or have to.
1618          */
1619         if (ccb->ccb_h.func_code == XPT_ATA_IO) {
1620                 struct ata_res *res = &ccb->ataio.res;
1621
1622                 if ((et == MVS_ERR_TFE) ||
1623                     (ccb->ataio.cmd.flags & CAM_ATAIO_NEEDRESULT)) {
1624                         mvs_tfd_read(dev, ccb);
1625                 } else
1626                         bzero(res, sizeof(*res));
1627         } else {
1628                 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE &&
1629                     ch->basic_dma == 0)
1630                         ccb->csio.resid = ccb->csio.dxfer_len - ch->donecount;
1631         }
1632         if (ch->numpslots == 0 || ch->basic_dma) {
1633                 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
1634                         bus_dmamap_sync(ch->dma.data_tag, slot->dma.data_map,
1635                             (ccb->ccb_h.flags & CAM_DIR_IN) ?
1636                             BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
1637                         bus_dmamap_unload(ch->dma.data_tag, slot->dma.data_map);
1638                 }
1639         }
1640         if (et != MVS_ERR_NONE)
1641                 ch->eslots |= (1 << slot->slot);
1642         /* In case of error, freeze device for proper recovery. */
1643         if ((et != MVS_ERR_NONE) && (!ch->recoverycmd) &&
1644             !(ccb->ccb_h.status & CAM_DEV_QFRZN)) {
1645                 xpt_freeze_devq(ccb->ccb_h.path, 1);
1646                 ccb->ccb_h.status |= CAM_DEV_QFRZN;
1647         }
1648         /* Set proper result status. */
1649         ccb->ccb_h.status &= ~CAM_STATUS_MASK;
1650         switch (et) {
1651         case MVS_ERR_NONE:
1652                 ccb->ccb_h.status |= CAM_REQ_CMP;
1653                 if (ccb->ccb_h.func_code == XPT_SCSI_IO)
1654                         ccb->csio.scsi_status = SCSI_STATUS_OK;
1655                 break;
1656         case MVS_ERR_INVALID:
1657                 ch->fatalerr = 1;
1658                 ccb->ccb_h.status |= CAM_REQ_INVALID;
1659                 break;
1660         case MVS_ERR_INNOCENT:
1661                 ccb->ccb_h.status |= CAM_REQUEUE_REQ;
1662                 break;
1663         case MVS_ERR_TFE:
1664         case MVS_ERR_NCQ:
1665                 if (ccb->ccb_h.func_code == XPT_SCSI_IO) {
1666                         ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR;
1667                         ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND;
1668                 } else {
1669                         ccb->ccb_h.status |= CAM_ATA_STATUS_ERROR;
1670                 }
1671                 break;
1672         case MVS_ERR_SATA:
1673                 ch->fatalerr = 1;
1674                 if (!ch->recoverycmd) {
1675                         xpt_freeze_simq(ch->sim, 1);
1676                         ccb->ccb_h.status &= ~CAM_STATUS_MASK;
1677                         ccb->ccb_h.status |= CAM_RELEASE_SIMQ;
1678                 }
1679                 ccb->ccb_h.status |= CAM_UNCOR_PARITY;
1680                 break;
1681         case MVS_ERR_TIMEOUT:
1682                 if (!ch->recoverycmd) {
1683                         xpt_freeze_simq(ch->sim, 1);
1684                         ccb->ccb_h.status &= ~CAM_STATUS_MASK;
1685                         ccb->ccb_h.status |= CAM_RELEASE_SIMQ;
1686                 }
1687                 ccb->ccb_h.status |= CAM_CMD_TIMEOUT;
1688                 break;
1689         default:
1690                 ch->fatalerr = 1;
1691                 ccb->ccb_h.status |= CAM_REQ_CMP_ERR;
1692         }
1693         /* Free slot. */
1694         ch->oslots &= ~(1 << slot->slot);
1695         ch->rslots &= ~(1 << slot->slot);
1696         ch->aslots &= ~(1 << slot->slot);
1697         slot->state = MVS_SLOT_EMPTY;
1698         slot->ccb = NULL;
1699         /* Update channel stats. */
1700         ch->numrslots--;
1701         ch->numrslotspd[ccb->ccb_h.target_id]--;
1702         if (ccb->ccb_h.func_code == XPT_ATA_IO) {
1703                 if (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA) {
1704                         ch->otagspd[ccb->ccb_h.target_id] &= ~(1 << slot->tag);
1705                         ch->numtslots--;
1706                         ch->numtslotspd[ccb->ccb_h.target_id]--;
1707                 } else if (ccb->ataio.cmd.flags & CAM_ATAIO_DMA) {
1708                         ch->numdslots--;
1709                 } else {
1710                         ch->numpslots--;
1711                 }
1712         } else {
1713                 ch->numpslots--;
1714                 ch->basic_dma = 0;
1715         }
1716         /* Cancel timeout state if request completed normally. */
1717         if (et != MVS_ERR_TIMEOUT) {
1718                 lastto = (ch->toslots == (1 << slot->slot));
1719                 ch->toslots &= ~(1 << slot->slot);
1720                 if (lastto)
1721                         xpt_release_simq(ch->sim, TRUE);
1722         }
1723         /* If it was our READ LOG command - process it. */
1724         if (ccb->ccb_h.recovery_type == RECOVERY_READ_LOG) {
1725                 mvs_process_read_log(dev, ccb);
1726         /* If it was our REQUEST SENSE command - process it. */
1727         } else if (ccb->ccb_h.recovery_type == RECOVERY_REQUEST_SENSE) {
1728                 mvs_process_request_sense(dev, ccb);
1729         /* If it was NCQ or ATAPI command error, put result on hold. */
1730         } else if (et == MVS_ERR_NCQ ||
1731             ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_SCSI_STATUS_ERROR &&
1732              (ccb->ccb_h.flags & CAM_DIS_AUTOSENSE) == 0)) {
1733                 ch->hold[slot->slot] = ccb;
1734                 ch->holdtag[slot->slot] = slot->tag;
1735                 ch->numhslots++;
1736         } else
1737                 xpt_done(ccb);
1738         /* If we have no other active commands, ... */
1739         if (ch->rslots == 0) {
1740                 /* if there was fatal error - reset port. */
1741                 if (ch->toslots != 0 || ch->fatalerr) {
1742                         mvs_reset(dev);
1743                 } else {
1744                         /* if we have slots in error, we can reinit port. */
1745                         if (ch->eslots != 0) {
1746                                 mvs_set_edma_mode(dev, MVS_EDMA_OFF);
1747                                 ch->eslots = 0;
1748                         }
1749                         /* if there commands on hold, we can do READ LOG. */
1750                         if (!ch->recoverycmd && ch->numhslots)
1751                                 mvs_issue_recovery(dev);
1752                 }
1753         /* If all the rest of commands are in timeout - give them chance. */
1754         } else if ((ch->rslots & ~ch->toslots) == 0 &&
1755             et != MVS_ERR_TIMEOUT)
1756                 mvs_rearm_timeout(dev);
1757         /* Unfreeze frozen command. */
1758         if (ch->frozen && !mvs_check_collision(dev, ch->frozen)) {
1759                 union ccb *fccb = ch->frozen;
1760                 ch->frozen = NULL;
1761                 mvs_begin_transaction(dev, fccb);
1762                 xpt_release_simq(ch->sim, TRUE);
1763         }
1764         /* Start PM timer. */
1765         if (ch->numrslots == 0 && ch->pm_level > 3 &&
1766             (ch->curr[ch->pm_present ? 15 : 0].caps & CTS_SATA_CAPS_D_PMREQ)) {
1767                 callout_schedule(&ch->pm_timer,
1768                     (ch->pm_level == 4) ? hz / 1000 : hz / 8);
1769         }
1770 }
1771
1772 static void
1773 mvs_issue_recovery(device_t dev)
1774 {
1775         struct mvs_channel *ch = device_get_softc(dev);
1776         union ccb *ccb;
1777         struct ccb_ataio *ataio;
1778         struct ccb_scsiio *csio;
1779         int i;
1780
1781         /* Find some held command. */
1782         for (i = 0; i < MVS_MAX_SLOTS; i++) {
1783                 if (ch->hold[i])
1784                         break;
1785         }
1786         ccb = xpt_alloc_ccb_nowait();
1787         if (ccb == NULL) {
1788                 device_printf(dev, "Unable to allocate recovery command\n");
1789 completeall:
1790                 /* We can't do anything -- complete held commands. */
1791                 for (i = 0; i < MVS_MAX_SLOTS; i++) {
1792                         if (ch->hold[i] == NULL)
1793                                 continue;
1794                         ch->hold[i]->ccb_h.status &= ~CAM_STATUS_MASK;
1795                         ch->hold[i]->ccb_h.status |= CAM_RESRC_UNAVAIL;
1796                         xpt_done(ch->hold[i]);
1797                         ch->hold[i] = NULL;
1798                         ch->numhslots--;
1799                 }
1800                 mvs_reset(dev);
1801                 return;
1802         }
1803         ccb->ccb_h = ch->hold[i]->ccb_h;        /* Reuse old header. */
1804         if (ccb->ccb_h.func_code == XPT_ATA_IO) {
1805                 /* READ LOG */
1806                 ccb->ccb_h.recovery_type = RECOVERY_READ_LOG;
1807                 ccb->ccb_h.func_code = XPT_ATA_IO;
1808                 ccb->ccb_h.flags = CAM_DIR_IN;
1809                 ccb->ccb_h.timeout = 1000;      /* 1s should be enough. */
1810                 ataio = &ccb->ataio;
1811                 ataio->data_ptr = malloc(512, M_MVS, M_NOWAIT);
1812                 if (ataio->data_ptr == NULL) {
1813                         xpt_free_ccb(ccb);
1814                         device_printf(dev,
1815                             "Unable to allocate memory for READ LOG command\n");
1816                         goto completeall;
1817                 }
1818                 ataio->dxfer_len = 512;
1819                 bzero(&ataio->cmd, sizeof(ataio->cmd));
1820                 ataio->cmd.flags = CAM_ATAIO_48BIT;
1821                 ataio->cmd.command = 0x2F;      /* READ LOG EXT */
1822                 ataio->cmd.sector_count = 1;
1823                 ataio->cmd.sector_count_exp = 0;
1824                 ataio->cmd.lba_low = 0x10;
1825                 ataio->cmd.lba_mid = 0;
1826                 ataio->cmd.lba_mid_exp = 0;
1827         } else {
1828                 /* REQUEST SENSE */
1829                 ccb->ccb_h.recovery_type = RECOVERY_REQUEST_SENSE;
1830                 ccb->ccb_h.recovery_slot = i;
1831                 ccb->ccb_h.func_code = XPT_SCSI_IO;
1832                 ccb->ccb_h.flags = CAM_DIR_IN;
1833                 ccb->ccb_h.status = 0;
1834                 ccb->ccb_h.timeout = 1000;      /* 1s should be enough. */
1835                 csio = &ccb->csio;
1836                 csio->data_ptr = (void *)&ch->hold[i]->csio.sense_data;
1837                 csio->dxfer_len = ch->hold[i]->csio.sense_len;
1838                 csio->cdb_len = 6;
1839                 bzero(&csio->cdb_io, sizeof(csio->cdb_io));
1840                 csio->cdb_io.cdb_bytes[0] = 0x03;
1841                 csio->cdb_io.cdb_bytes[4] = csio->dxfer_len;
1842         }
1843         /* Freeze SIM while doing recovery. */
1844         ch->recoverycmd = 1;
1845         xpt_freeze_simq(ch->sim, 1);
1846         mvs_begin_transaction(dev, ccb);
1847 }
1848
1849 static void
1850 mvs_process_read_log(device_t dev, union ccb *ccb)
1851 {
1852         struct mvs_channel *ch = device_get_softc(dev);
1853         uint8_t *data;
1854         struct ata_res *res;
1855         int i;
1856
1857         ch->recoverycmd = 0;
1858
1859         data = ccb->ataio.data_ptr;
1860         if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP &&
1861             (data[0] & 0x80) == 0) {
1862                 for (i = 0; i < MVS_MAX_SLOTS; i++) {
1863                         if (!ch->hold[i])
1864                                 continue;
1865                         if (ch->hold[i]->ccb_h.target_id != ccb->ccb_h.target_id)
1866                                 continue;
1867                         if ((data[0] & 0x1F) == ch->holdtag[i]) {
1868                                 res = &ch->hold[i]->ataio.res;
1869                                 res->status = data[2];
1870                                 res->error = data[3];
1871                                 res->lba_low = data[4];
1872                                 res->lba_mid = data[5];
1873                                 res->lba_high = data[6];
1874                                 res->device = data[7];
1875                                 res->lba_low_exp = data[8];
1876                                 res->lba_mid_exp = data[9];
1877                                 res->lba_high_exp = data[10];
1878                                 res->sector_count = data[12];
1879                                 res->sector_count_exp = data[13];
1880                         } else {
1881                                 ch->hold[i]->ccb_h.status &= ~CAM_STATUS_MASK;
1882                                 ch->hold[i]->ccb_h.status |= CAM_REQUEUE_REQ;
1883                         }
1884                         xpt_done(ch->hold[i]);
1885                         ch->hold[i] = NULL;
1886                         ch->numhslots--;
1887                 }
1888         } else {
1889                 if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP)
1890                         device_printf(dev, "Error while READ LOG EXT\n");
1891                 else if ((data[0] & 0x80) == 0) {
1892                         device_printf(dev,
1893                             "Non-queued command error in READ LOG EXT\n");
1894                 }
1895                 for (i = 0; i < MVS_MAX_SLOTS; i++) {
1896                         if (!ch->hold[i])
1897                                 continue;
1898                         if (ch->hold[i]->ccb_h.target_id != ccb->ccb_h.target_id)
1899                                 continue;
1900                         xpt_done(ch->hold[i]);
1901                         ch->hold[i] = NULL;
1902                         ch->numhslots--;
1903                 }
1904         }
1905         free(ccb->ataio.data_ptr, M_MVS);
1906         xpt_free_ccb(ccb);
1907         xpt_release_simq(ch->sim, TRUE);
1908 }
1909
1910 static void
1911 mvs_process_request_sense(device_t dev, union ccb *ccb)
1912 {
1913         struct mvs_channel *ch = device_get_softc(dev);
1914         int i;
1915
1916         ch->recoverycmd = 0;
1917
1918         i = ccb->ccb_h.recovery_slot;
1919         if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) {
1920                 ch->hold[i]->ccb_h.status |= CAM_AUTOSNS_VALID;
1921         } else {
1922                 ch->hold[i]->ccb_h.status &= ~CAM_STATUS_MASK;
1923                 ch->hold[i]->ccb_h.status |= CAM_AUTOSENSE_FAIL;
1924         }
1925         xpt_done(ch->hold[i]);
1926         ch->hold[i] = NULL;
1927         ch->numhslots--;
1928         xpt_free_ccb(ccb);
1929         xpt_release_simq(ch->sim, TRUE);
1930 }
1931
1932 static int
1933 mvs_wait(device_t dev, u_int s, u_int c, int t)
1934 {
1935         int timeout = 0;
1936         uint8_t st;
1937
1938         while (((st =  mvs_getstatus(dev, 0)) & (s | c)) != s) {
1939                 if (timeout >= t) {
1940                         if (t != 0)
1941                                 device_printf(dev, "Wait status %02x\n", st);
1942                         return (-1);
1943                 }
1944                 DELAY(1000);
1945                 timeout++;
1946         }
1947         return (timeout);
1948 }
1949
1950 static void
1951 mvs_requeue_frozen(device_t dev)
1952 {
1953         struct mvs_channel *ch = device_get_softc(dev);
1954         union ccb *fccb = ch->frozen;
1955
1956         if (fccb) {
1957                 ch->frozen = NULL;
1958                 fccb->ccb_h.status = CAM_REQUEUE_REQ | CAM_RELEASE_SIMQ;
1959                 if (!(fccb->ccb_h.status & CAM_DEV_QFRZN)) {
1960                         xpt_freeze_devq(fccb->ccb_h.path, 1);
1961                         fccb->ccb_h.status |= CAM_DEV_QFRZN;
1962                 }
1963                 xpt_done(fccb);
1964         }
1965 }
1966
1967 static void
1968 mvs_reset_to(void *arg)
1969 {
1970         device_t dev = arg;
1971         struct mvs_channel *ch = device_get_softc(dev);
1972         int t;
1973
1974         if (ch->resetting == 0)
1975                 return;
1976         ch->resetting--;
1977         if ((t = mvs_wait(dev, 0, ATA_S_BUSY | ATA_S_DRQ, 0)) >= 0) {
1978                 if (bootverbose) {
1979                         device_printf(dev,
1980                             "MVS reset: device ready after %dms\n",
1981                             (310 - ch->resetting) * 100);
1982                 }
1983                 ch->resetting = 0;
1984                 xpt_release_simq(ch->sim, TRUE);
1985                 return;
1986         }
1987         if (ch->resetting == 0) {
1988                 device_printf(dev,
1989                     "MVS reset: device not ready after 31000ms\n");
1990                 xpt_release_simq(ch->sim, TRUE);
1991                 return;
1992         }
1993         callout_schedule(&ch->reset_timer, hz / 10);
1994 }
1995
1996 static void
1997 mvs_errata(device_t dev)
1998 {
1999         struct mvs_channel *ch = device_get_softc(dev);
2000         uint32_t val;
2001
2002         if (ch->quirks & MVS_Q_SOC65) {
2003                 val = ATA_INL(ch->r_mem, SATA_PHYM3);
2004                 val &= ~(0x3 << 27);    /* SELMUPF = 1 */
2005                 val |= (0x1 << 27);
2006                 val &= ~(0x3 << 29);    /* SELMUPI = 1 */
2007                 val |= (0x1 << 29);
2008                 ATA_OUTL(ch->r_mem, SATA_PHYM3, val);
2009
2010                 val = ATA_INL(ch->r_mem, SATA_PHYM4);
2011                 val &= ~0x1;            /* SATU_OD8 = 0 */
2012                 val |= (0x1 << 16);     /* reserved bit 16 = 1 */
2013                 ATA_OUTL(ch->r_mem, SATA_PHYM4, val);
2014
2015                 val = ATA_INL(ch->r_mem, SATA_PHYM9_GEN2);
2016                 val &= ~0xf;            /* TXAMP[3:0] = 8 */
2017                 val |= 0x8;
2018                 val &= ~(0x1 << 14);    /* TXAMP[4] = 0 */
2019                 ATA_OUTL(ch->r_mem, SATA_PHYM9_GEN2, val);
2020
2021                 val = ATA_INL(ch->r_mem, SATA_PHYM9_GEN1);
2022                 val &= ~0xf;            /* TXAMP[3:0] = 8 */
2023                 val |= 0x8;
2024                 val &= ~(0x1 << 14);    /* TXAMP[4] = 0 */
2025                 ATA_OUTL(ch->r_mem, SATA_PHYM9_GEN1, val);
2026         }
2027 }
2028
2029 static void
2030 mvs_reset(device_t dev)
2031 {
2032         struct mvs_channel *ch = device_get_softc(dev);
2033         int i;
2034
2035         xpt_freeze_simq(ch->sim, 1);
2036         if (bootverbose)
2037                 device_printf(dev, "MVS reset...\n");
2038         /* Forget about previous reset. */
2039         if (ch->resetting) {
2040                 ch->resetting = 0;
2041                 callout_stop(&ch->reset_timer);
2042                 xpt_release_simq(ch->sim, TRUE);
2043         }
2044         /* Requeue freezed command. */
2045         mvs_requeue_frozen(dev);
2046         /* Kill the engine and requeue all running commands. */
2047         mvs_set_edma_mode(dev, MVS_EDMA_OFF);
2048         ATA_OUTL(ch->r_mem, DMA_C, 0);
2049         for (i = 0; i < MVS_MAX_SLOTS; i++) {
2050                 /* Do we have a running request on slot? */
2051                 if (ch->slot[i].state < MVS_SLOT_RUNNING)
2052                         continue;
2053                 /* XXX; Commands in loading state. */
2054                 mvs_end_transaction(&ch->slot[i], MVS_ERR_INNOCENT);
2055         }
2056         for (i = 0; i < MVS_MAX_SLOTS; i++) {
2057                 if (!ch->hold[i])
2058                         continue;
2059                 xpt_done(ch->hold[i]);
2060                 ch->hold[i] = NULL;
2061                 ch->numhslots--;
2062         }
2063         if (ch->toslots != 0)
2064                 xpt_release_simq(ch->sim, TRUE);
2065         ch->eslots = 0;
2066         ch->toslots = 0;
2067         ch->fatalerr = 0;
2068         ch->fake_busy = 0;
2069         /* Tell the XPT about the event */
2070         xpt_async(AC_BUS_RESET, ch->path, NULL);
2071         ATA_OUTL(ch->r_mem, EDMA_IEM, 0);
2072         ATA_OUTL(ch->r_mem, EDMA_CMD, EDMA_CMD_EATARST);
2073         DELAY(25);
2074         ATA_OUTL(ch->r_mem, EDMA_CMD, 0);
2075         mvs_errata(dev);
2076         /* Reset and reconnect PHY, */
2077         if (!mvs_sata_phy_reset(dev)) {
2078                 if (bootverbose)
2079                         device_printf(dev, "MVS reset: device not found\n");
2080                 ch->devices = 0;
2081                 ATA_OUTL(ch->r_mem, SATA_SE, 0xffffffff);
2082                 ATA_OUTL(ch->r_mem, EDMA_IEC, 0);
2083                 ATA_OUTL(ch->r_mem, EDMA_IEM, ~EDMA_IE_TRANSIENT);
2084                 xpt_release_simq(ch->sim, TRUE);
2085                 return;
2086         }
2087         if (bootverbose)
2088                 device_printf(dev, "MVS reset: device found\n");
2089         /* Wait for clearing busy status. */
2090         if ((i = mvs_wait(dev, 0, ATA_S_BUSY | ATA_S_DRQ,
2091             dumping ? 31000 : 0)) < 0) {
2092                 if (dumping) {
2093                         device_printf(dev,
2094                             "MVS reset: device not ready after 31000ms\n");
2095                 } else
2096                         ch->resetting = 310;
2097         } else if (bootverbose)
2098                 device_printf(dev, "MVS reset: device ready after %dms\n", i);
2099         ch->devices = 1;
2100         ATA_OUTL(ch->r_mem, SATA_SE, 0xffffffff);
2101         ATA_OUTL(ch->r_mem, EDMA_IEC, 0);
2102         ATA_OUTL(ch->r_mem, EDMA_IEM, ~EDMA_IE_TRANSIENT);
2103         if (ch->resetting)
2104                 callout_reset(&ch->reset_timer, hz / 10, mvs_reset_to, dev);
2105         else
2106                 xpt_release_simq(ch->sim, TRUE);
2107 }
2108
2109 static void
2110 mvs_softreset(device_t dev, union ccb *ccb)
2111 {
2112         struct mvs_channel *ch = device_get_softc(dev);
2113         int port = ccb->ccb_h.target_id & 0x0f;
2114         int i, stuck;
2115         uint8_t status;
2116
2117         mvs_set_edma_mode(dev, MVS_EDMA_OFF);
2118         ATA_OUTB(ch->r_mem, SATA_SATAICTL, port << SATA_SATAICTL_PMPTX_SHIFT);
2119         ATA_OUTB(ch->r_mem, ATA_CONTROL, ATA_A_RESET);
2120         DELAY(10000);
2121         ATA_OUTB(ch->r_mem, ATA_CONTROL, 0);
2122         ccb->ccb_h.status &= ~CAM_STATUS_MASK;
2123         /* Wait for clearing busy status. */
2124         if ((i = mvs_wait(dev, 0, ATA_S_BUSY, ccb->ccb_h.timeout)) < 0) {
2125                 ccb->ccb_h.status |= CAM_CMD_TIMEOUT;
2126                 stuck = 1;
2127         } else {
2128                 status = mvs_getstatus(dev, 0);
2129                 if (status & ATA_S_ERROR)
2130                         ccb->ccb_h.status |= CAM_ATA_STATUS_ERROR;
2131                 else
2132                         ccb->ccb_h.status |= CAM_REQ_CMP;
2133                 if (status & ATA_S_DRQ)
2134                         stuck = 1;
2135                 else
2136                         stuck = 0;
2137         }
2138         mvs_tfd_read(dev, ccb);
2139
2140         /*
2141          * XXX: If some device on PMP failed to soft-reset,
2142          * try to recover by sending dummy soft-reset to PMP.
2143          */
2144         if (stuck && ch->pm_present && port != 15) {
2145                 ATA_OUTB(ch->r_mem, SATA_SATAICTL,
2146                     15 << SATA_SATAICTL_PMPTX_SHIFT);
2147                 ATA_OUTB(ch->r_mem, ATA_CONTROL, ATA_A_RESET);
2148                 DELAY(10000);
2149                 ATA_OUTB(ch->r_mem, ATA_CONTROL, 0);
2150                 mvs_wait(dev, 0, ATA_S_BUSY | ATA_S_DRQ, ccb->ccb_h.timeout);
2151         }
2152
2153         xpt_done(ccb);
2154 }
2155
2156 static int
2157 mvs_sata_connect(struct mvs_channel *ch)
2158 {
2159         u_int32_t status;
2160         int timeout, found = 0;
2161
2162         /* Wait up to 100ms for "connect well" */
2163         for (timeout = 0; timeout < 1000 ; timeout++) {
2164                 status = ATA_INL(ch->r_mem, SATA_SS);
2165                 if ((status & SATA_SS_DET_MASK) != SATA_SS_DET_NO_DEVICE)
2166                         found = 1;
2167                 if (((status & SATA_SS_DET_MASK) == SATA_SS_DET_PHY_ONLINE) &&
2168                     ((status & SATA_SS_SPD_MASK) != SATA_SS_SPD_NO_SPEED) &&
2169                     ((status & SATA_SS_IPM_MASK) == SATA_SS_IPM_ACTIVE))
2170                         break;
2171                 if ((status & SATA_SS_DET_MASK) == SATA_SS_DET_PHY_OFFLINE) {
2172                         if (bootverbose) {
2173                                 device_printf(ch->dev, "SATA offline status=%08x\n",
2174                                     status);
2175                         }
2176                         return (0);
2177                 }
2178                 if (found == 0 && timeout >= 100)
2179                         break;
2180                 DELAY(100);
2181         }
2182         if (timeout >= 1000 || !found) {
2183                 if (bootverbose) {
2184                         device_printf(ch->dev,
2185                             "SATA connect timeout time=%dus status=%08x\n",
2186                             timeout * 100, status);
2187                 }
2188                 return (0);
2189         }
2190         if (bootverbose) {
2191                 device_printf(ch->dev, "SATA connect time=%dus status=%08x\n",
2192                     timeout * 100, status);
2193         }
2194         /* Clear SATA error register */
2195         ATA_OUTL(ch->r_mem, SATA_SE, 0xffffffff);
2196         return (1);
2197 }
2198
2199 static int
2200 mvs_sata_phy_reset(device_t dev)
2201 {
2202         struct mvs_channel *ch = device_get_softc(dev);
2203         int sata_rev;
2204         uint32_t val;
2205
2206         sata_rev = ch->user[ch->pm_present ? 15 : 0].revision;
2207         if (sata_rev == 1)
2208                 val = SATA_SC_SPD_SPEED_GEN1;
2209         else if (sata_rev == 2)
2210                 val = SATA_SC_SPD_SPEED_GEN2;
2211         else if (sata_rev == 3)
2212                 val = SATA_SC_SPD_SPEED_GEN3;
2213         else
2214                 val = 0;
2215         ATA_OUTL(ch->r_mem, SATA_SC,
2216             SATA_SC_DET_RESET | val |
2217             SATA_SC_IPM_DIS_PARTIAL | SATA_SC_IPM_DIS_SLUMBER);
2218         DELAY(1000);
2219         ATA_OUTL(ch->r_mem, SATA_SC,
2220             SATA_SC_DET_IDLE | val | ((ch->pm_level > 0) ? 0 :
2221             (SATA_SC_IPM_DIS_PARTIAL | SATA_SC_IPM_DIS_SLUMBER)));
2222         if (!mvs_sata_connect(ch)) {
2223                 if (ch->pm_level > 0)
2224                         ATA_OUTL(ch->r_mem, SATA_SC, SATA_SC_DET_DISABLE);
2225                 return (0);
2226         }
2227         return (1);
2228 }
2229
2230 static int
2231 mvs_check_ids(device_t dev, union ccb *ccb)
2232 {
2233         struct mvs_channel *ch = device_get_softc(dev);
2234
2235         if (ccb->ccb_h.target_id > ((ch->quirks & MVS_Q_GENI) ? 0 : 15)) {
2236                 ccb->ccb_h.status = CAM_TID_INVALID;
2237                 xpt_done(ccb);
2238                 return (-1);
2239         }
2240         if (ccb->ccb_h.target_lun != 0) {
2241                 ccb->ccb_h.status = CAM_LUN_INVALID;
2242                 xpt_done(ccb);
2243                 return (-1);
2244         }
2245         return (0);
2246 }
2247
2248 static void
2249 mvsaction(struct cam_sim *sim, union ccb *ccb)
2250 {
2251         device_t dev, parent;
2252         struct mvs_channel *ch;
2253
2254         CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("mvsaction func_code=%x\n",
2255             ccb->ccb_h.func_code));
2256
2257         ch = (struct mvs_channel *)cam_sim_softc(sim);
2258         dev = ch->dev;
2259         switch (ccb->ccb_h.func_code) {
2260         /* Common cases first */
2261         case XPT_ATA_IO:        /* Execute the requested I/O operation */
2262         case XPT_SCSI_IO:
2263                 if (mvs_check_ids(dev, ccb))
2264                         return;
2265                 if (ch->devices == 0 ||
2266                     (ch->pm_present == 0 &&
2267                      ccb->ccb_h.target_id > 0 && ccb->ccb_h.target_id < 15)) {
2268                         ccb->ccb_h.status = CAM_SEL_TIMEOUT;
2269                         break;
2270                 }
2271                 ccb->ccb_h.recovery_type = RECOVERY_NONE;
2272                 /* Check for command collision. */
2273                 if (mvs_check_collision(dev, ccb)) {
2274                         /* Freeze command. */
2275                         ch->frozen = ccb;
2276                         /* We have only one frozen slot, so freeze simq also. */
2277                         xpt_freeze_simq(ch->sim, 1);
2278                         return;
2279                 }
2280                 mvs_begin_transaction(dev, ccb);
2281                 return;
2282         case XPT_EN_LUN:                /* Enable LUN as a target */
2283         case XPT_TARGET_IO:             /* Execute target I/O request */
2284         case XPT_ACCEPT_TARGET_IO:      /* Accept Host Target Mode CDB */
2285         case XPT_CONT_TARGET_IO:        /* Continue Host Target I/O Connection*/
2286         case XPT_ABORT:                 /* Abort the specified CCB */
2287                 /* XXX Implement */
2288                 ccb->ccb_h.status = CAM_REQ_INVALID;
2289                 break;
2290         case XPT_SET_TRAN_SETTINGS:
2291         {
2292                 struct  ccb_trans_settings *cts = &ccb->cts;
2293                 struct  mvs_device *d;
2294
2295                 if (mvs_check_ids(dev, ccb))
2296                         return;
2297                 if (cts->type == CTS_TYPE_CURRENT_SETTINGS)
2298                         d = &ch->curr[ccb->ccb_h.target_id];
2299                 else
2300                         d = &ch->user[ccb->ccb_h.target_id];
2301                 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_REVISION)
2302                         d->revision = cts->xport_specific.sata.revision;
2303                 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_MODE)
2304                         d->mode = cts->xport_specific.sata.mode;
2305                 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_BYTECOUNT) {
2306                         d->bytecount = min((ch->quirks & MVS_Q_GENIIE) ? 8192 : 2048,
2307                             cts->xport_specific.sata.bytecount);
2308                 }
2309                 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_TAGS)
2310                         d->tags = min(MVS_MAX_SLOTS, cts->xport_specific.sata.tags);
2311                 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_PM)
2312                         ch->pm_present = cts->xport_specific.sata.pm_present;
2313                 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_ATAPI)
2314                         d->atapi = cts->xport_specific.sata.atapi;
2315                 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_CAPS)
2316                         d->caps = cts->xport_specific.sata.caps;
2317                 ccb->ccb_h.status = CAM_REQ_CMP;
2318                 break;
2319         }
2320         case XPT_GET_TRAN_SETTINGS:
2321         /* Get default/user set transfer settings for the target */
2322         {
2323                 struct  ccb_trans_settings *cts = &ccb->cts;
2324                 struct  mvs_device *d;
2325                 uint32_t status;
2326
2327                 if (mvs_check_ids(dev, ccb))
2328                         return;
2329                 if (cts->type == CTS_TYPE_CURRENT_SETTINGS)
2330                         d = &ch->curr[ccb->ccb_h.target_id];
2331                 else
2332                         d = &ch->user[ccb->ccb_h.target_id];
2333                 cts->protocol = PROTO_UNSPECIFIED;
2334                 cts->protocol_version = PROTO_VERSION_UNSPECIFIED;
2335                 cts->transport = XPORT_SATA;
2336                 cts->transport_version = XPORT_VERSION_UNSPECIFIED;
2337                 cts->proto_specific.valid = 0;
2338                 cts->xport_specific.sata.valid = 0;
2339                 if (cts->type == CTS_TYPE_CURRENT_SETTINGS &&
2340                     (ccb->ccb_h.target_id == 15 ||
2341                     (ccb->ccb_h.target_id == 0 && !ch->pm_present))) {
2342                         status = ATA_INL(ch->r_mem, SATA_SS) & SATA_SS_SPD_MASK;
2343                         if (status & 0x0f0) {
2344                                 cts->xport_specific.sata.revision =
2345                                     (status & 0x0f0) >> 4;
2346                                 cts->xport_specific.sata.valid |=
2347                                     CTS_SATA_VALID_REVISION;
2348                         }
2349                         cts->xport_specific.sata.caps = d->caps & CTS_SATA_CAPS_D;
2350 //                      if (ch->pm_level)
2351 //                              cts->xport_specific.sata.caps |= CTS_SATA_CAPS_H_PMREQ;
2352                         cts->xport_specific.sata.caps |= CTS_SATA_CAPS_H_AN;
2353                         cts->xport_specific.sata.caps &=
2354                             ch->user[ccb->ccb_h.target_id].caps;
2355                         cts->xport_specific.sata.valid |= CTS_SATA_VALID_CAPS;
2356                 } else {
2357                         cts->xport_specific.sata.revision = d->revision;
2358                         cts->xport_specific.sata.valid |= CTS_SATA_VALID_REVISION;
2359                         cts->xport_specific.sata.caps = d->caps;
2360                         if (cts->type == CTS_TYPE_CURRENT_SETTINGS/* &&
2361                             (ch->quirks & MVS_Q_GENIIE) == 0*/)
2362                                 cts->xport_specific.sata.caps &= ~CTS_SATA_CAPS_H_AN;
2363                         cts->xport_specific.sata.valid |= CTS_SATA_VALID_CAPS;
2364                 }
2365                 cts->xport_specific.sata.mode = d->mode;
2366                 cts->xport_specific.sata.valid |= CTS_SATA_VALID_MODE;
2367                 cts->xport_specific.sata.bytecount = d->bytecount;
2368                 cts->xport_specific.sata.valid |= CTS_SATA_VALID_BYTECOUNT;
2369                 cts->xport_specific.sata.pm_present = ch->pm_present;
2370                 cts->xport_specific.sata.valid |= CTS_SATA_VALID_PM;
2371                 cts->xport_specific.sata.tags = d->tags;
2372                 cts->xport_specific.sata.valid |= CTS_SATA_VALID_TAGS;
2373                 cts->xport_specific.sata.atapi = d->atapi;
2374                 cts->xport_specific.sata.valid |= CTS_SATA_VALID_ATAPI;
2375                 ccb->ccb_h.status = CAM_REQ_CMP;
2376                 break;
2377         }
2378         case XPT_RESET_BUS:             /* Reset the specified SCSI bus */
2379         case XPT_RESET_DEV:     /* Bus Device Reset the specified SCSI device */
2380                 mvs_reset(dev);
2381                 ccb->ccb_h.status = CAM_REQ_CMP;
2382                 break;
2383         case XPT_TERM_IO:               /* Terminate the I/O process */
2384                 /* XXX Implement */
2385                 ccb->ccb_h.status = CAM_REQ_INVALID;
2386                 break;
2387         case XPT_PATH_INQ:              /* Path routing inquiry */
2388         {
2389                 struct ccb_pathinq *cpi = &ccb->cpi;
2390
2391                 parent = device_get_parent(dev);
2392                 cpi->version_num = 1; /* XXX??? */
2393                 cpi->hba_inquiry = PI_SDTR_ABLE;
2394                 if (!(ch->quirks & MVS_Q_GENI)) {
2395                         cpi->hba_inquiry |= PI_SATAPM;
2396                         /* Gen-II is extremely slow with NCQ on PMP. */
2397                         if ((ch->quirks & MVS_Q_GENIIE) || ch->pm_present == 0)
2398                                 cpi->hba_inquiry |= PI_TAG_ABLE;
2399                 }
2400                 cpi->target_sprt = 0;
2401                 cpi->hba_misc = PIM_SEQSCAN;
2402                 cpi->hba_eng_cnt = 0;
2403                 if (!(ch->quirks & MVS_Q_GENI))
2404                         cpi->max_target = 15;
2405                 else
2406                         cpi->max_target = 0;
2407                 cpi->max_lun = 0;
2408                 cpi->initiator_id = 0;
2409                 cpi->bus_id = cam_sim_bus(sim);
2410                 cpi->base_transfer_speed = 150000;
2411                 strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
2412                 strncpy(cpi->hba_vid, "Marvell", HBA_IDLEN);
2413                 strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
2414                 cpi->unit_number = cam_sim_unit(sim);
2415                 cpi->transport = XPORT_SATA;
2416                 cpi->transport_version = XPORT_VERSION_UNSPECIFIED;
2417                 cpi->protocol = PROTO_ATA;
2418                 cpi->protocol_version = PROTO_VERSION_UNSPECIFIED;
2419                 cpi->maxio = MAXPHYS;
2420                 if ((ch->quirks & MVS_Q_SOC) == 0) {
2421                         cpi->hba_vendor = pci_get_vendor(parent);
2422                         cpi->hba_device = pci_get_device(parent);
2423                         cpi->hba_subvendor = pci_get_subvendor(parent);
2424                         cpi->hba_subdevice = pci_get_subdevice(parent);
2425                 }
2426                 cpi->ccb_h.status = CAM_REQ_CMP;
2427                 break;
2428         }
2429         default:
2430                 ccb->ccb_h.status = CAM_REQ_INVALID;
2431                 break;
2432         }
2433         xpt_done(ccb);
2434 }
2435
2436 static void
2437 mvspoll(struct cam_sim *sim)
2438 {
2439         struct mvs_channel *ch = (struct mvs_channel *)cam_sim_softc(sim);
2440         struct mvs_intr_arg arg;
2441
2442         arg.arg = ch->dev;
2443         arg.cause = 2 | 4; /* XXX */
2444         mvs_ch_intr(&arg);
2445         if (ch->resetting != 0 &&
2446             (--ch->resetpolldiv <= 0 || !callout_pending(&ch->reset_timer))) {
2447                 ch->resetpolldiv = 1000;
2448                 mvs_reset_to(ch->dev);
2449         }
2450 }
2451