2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
4 * Copyright (c) 2007-2009 Sam Leffler, Errno Consulting
5 * Copyright (c) 2007-2008 Marvell Semiconductor, Inc.
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer,
13 * without modification.
14 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
15 * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
16 * redistribution must be conditioned upon including a substantially
17 * similar Disclaimer requirement for further binary redistribution.
20 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
23 * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
24 * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
25 * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
28 * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
30 * THE POSSIBILITY OF SUCH DAMAGES.
33 #include <sys/cdefs.h>
34 __FBSDID("$FreeBSD$");
37 * Driver for the Marvell 88W8363 Wireless LAN controller.
44 #include <sys/param.h>
45 #include <sys/systm.h>
46 #include <sys/sysctl.h>
48 #include <sys/malloc.h>
50 #include <sys/mutex.h>
51 #include <sys/kernel.h>
52 #include <sys/socket.h>
53 #include <sys/sockio.h>
54 #include <sys/errno.h>
55 #include <sys/callout.h>
57 #include <sys/endian.h>
58 #include <sys/kthread.h>
59 #include <sys/taskqueue.h>
61 #include <machine/bus.h>
64 #include <net/if_var.h>
65 #include <net/if_dl.h>
66 #include <net/if_media.h>
67 #include <net/if_types.h>
68 #include <net/if_arp.h>
69 #include <net/ethernet.h>
70 #include <net/if_llc.h>
74 #include <net80211/ieee80211_var.h>
75 #include <net80211/ieee80211_input.h>
76 #include <net80211/ieee80211_regdomain.h>
79 #include <netinet/in.h>
80 #include <netinet/if_ether.h>
83 #include <dev/mwl/if_mwlvar.h>
84 #include <dev/mwl/mwldiag.h>
86 /* idiomatic shorthands: MS = mask+shift, SM = shift+mask */
87 #define MS(v,x) (((v) & x) >> x##_S)
88 #define SM(v,x) (((v) << x##_S) & x)
90 static struct ieee80211vap *mwl_vap_create(struct ieee80211com *,
91 const char [IFNAMSIZ], int, enum ieee80211_opmode, int,
92 const uint8_t [IEEE80211_ADDR_LEN],
93 const uint8_t [IEEE80211_ADDR_LEN]);
94 static void mwl_vap_delete(struct ieee80211vap *);
95 static int mwl_setupdma(struct mwl_softc *);
96 static int mwl_hal_reset(struct mwl_softc *sc);
97 static int mwl_init(struct mwl_softc *);
98 static void mwl_parent(struct ieee80211com *);
99 static int mwl_reset(struct ieee80211vap *, u_long);
100 static void mwl_stop(struct mwl_softc *);
101 static void mwl_start(struct mwl_softc *);
102 static int mwl_transmit(struct ieee80211com *, struct mbuf *);
103 static int mwl_raw_xmit(struct ieee80211_node *, struct mbuf *,
104 const struct ieee80211_bpf_params *);
105 static int mwl_media_change(struct ifnet *);
106 static void mwl_watchdog(void *);
107 static int mwl_ioctl(struct ieee80211com *, u_long, void *);
108 static void mwl_radar_proc(void *, int);
109 static void mwl_chanswitch_proc(void *, int);
110 static void mwl_bawatchdog_proc(void *, int);
111 static int mwl_key_alloc(struct ieee80211vap *,
112 struct ieee80211_key *,
113 ieee80211_keyix *, ieee80211_keyix *);
114 static int mwl_key_delete(struct ieee80211vap *,
115 const struct ieee80211_key *);
116 static int mwl_key_set(struct ieee80211vap *,
117 const struct ieee80211_key *);
118 static int _mwl_key_set(struct ieee80211vap *,
119 const struct ieee80211_key *,
120 const uint8_t mac[IEEE80211_ADDR_LEN]);
121 static int mwl_mode_init(struct mwl_softc *);
122 static void mwl_update_mcast(struct ieee80211com *);
123 static void mwl_update_promisc(struct ieee80211com *);
124 static void mwl_updateslot(struct ieee80211com *);
125 static int mwl_beacon_setup(struct ieee80211vap *);
126 static void mwl_beacon_update(struct ieee80211vap *, int);
127 #ifdef MWL_HOST_PS_SUPPORT
128 static void mwl_update_ps(struct ieee80211vap *, int);
129 static int mwl_set_tim(struct ieee80211_node *, int);
131 static int mwl_dma_setup(struct mwl_softc *);
132 static void mwl_dma_cleanup(struct mwl_softc *);
133 static struct ieee80211_node *mwl_node_alloc(struct ieee80211vap *,
134 const uint8_t [IEEE80211_ADDR_LEN]);
135 static void mwl_node_cleanup(struct ieee80211_node *);
136 static void mwl_node_drain(struct ieee80211_node *);
137 static void mwl_node_getsignal(const struct ieee80211_node *,
139 static void mwl_node_getmimoinfo(const struct ieee80211_node *,
140 struct ieee80211_mimo_info *);
141 static int mwl_rxbuf_init(struct mwl_softc *, struct mwl_rxbuf *);
142 static void mwl_rx_proc(void *, int);
143 static void mwl_txq_init(struct mwl_softc *sc, struct mwl_txq *, int);
144 static int mwl_tx_setup(struct mwl_softc *, int, int);
145 static int mwl_wme_update(struct ieee80211com *);
146 static void mwl_tx_cleanupq(struct mwl_softc *, struct mwl_txq *);
147 static void mwl_tx_cleanup(struct mwl_softc *);
148 static uint16_t mwl_calcformat(uint8_t rate, const struct ieee80211_node *);
149 static int mwl_tx_start(struct mwl_softc *, struct ieee80211_node *,
150 struct mwl_txbuf *, struct mbuf *);
151 static void mwl_tx_proc(void *, int);
152 static int mwl_chan_set(struct mwl_softc *, struct ieee80211_channel *);
153 static void mwl_draintxq(struct mwl_softc *);
154 static void mwl_cleartxq(struct mwl_softc *, struct ieee80211vap *);
155 static int mwl_recv_action(struct ieee80211_node *,
156 const struct ieee80211_frame *,
157 const uint8_t *, const uint8_t *);
158 static int mwl_addba_request(struct ieee80211_node *,
159 struct ieee80211_tx_ampdu *, int dialogtoken,
160 int baparamset, int batimeout);
161 static int mwl_addba_response(struct ieee80211_node *,
162 struct ieee80211_tx_ampdu *, int status,
163 int baparamset, int batimeout);
164 static void mwl_addba_stop(struct ieee80211_node *,
165 struct ieee80211_tx_ampdu *);
166 static int mwl_startrecv(struct mwl_softc *);
167 static MWL_HAL_APMODE mwl_getapmode(const struct ieee80211vap *,
168 struct ieee80211_channel *);
169 static int mwl_setapmode(struct ieee80211vap *, struct ieee80211_channel*);
170 static void mwl_scan_start(struct ieee80211com *);
171 static void mwl_scan_end(struct ieee80211com *);
172 static void mwl_set_channel(struct ieee80211com *);
173 static int mwl_peerstadb(struct ieee80211_node *,
174 int aid, int staid, MWL_HAL_PEERINFO *pi);
175 static int mwl_localstadb(struct ieee80211vap *);
176 static int mwl_newstate(struct ieee80211vap *, enum ieee80211_state, int);
177 static int allocstaid(struct mwl_softc *sc, int aid);
178 static void delstaid(struct mwl_softc *sc, int staid);
179 static void mwl_newassoc(struct ieee80211_node *, int);
180 static void mwl_agestations(void *);
181 static int mwl_setregdomain(struct ieee80211com *,
182 struct ieee80211_regdomain *, int,
183 struct ieee80211_channel []);
184 static void mwl_getradiocaps(struct ieee80211com *, int, int *,
185 struct ieee80211_channel []);
186 static int mwl_getchannels(struct mwl_softc *);
188 static void mwl_sysctlattach(struct mwl_softc *);
189 static void mwl_announce(struct mwl_softc *);
191 SYSCTL_NODE(_hw, OID_AUTO, mwl, CTLFLAG_RD, 0, "Marvell driver parameters");
193 static int mwl_rxdesc = MWL_RXDESC; /* # rx desc's to allocate */
194 SYSCTL_INT(_hw_mwl, OID_AUTO, rxdesc, CTLFLAG_RW, &mwl_rxdesc,
195 0, "rx descriptors allocated");
196 static int mwl_rxbuf = MWL_RXBUF; /* # rx buffers to allocate */
197 SYSCTL_INT(_hw_mwl, OID_AUTO, rxbuf, CTLFLAG_RWTUN, &mwl_rxbuf,
198 0, "rx buffers allocated");
199 static int mwl_txbuf = MWL_TXBUF; /* # tx buffers to allocate */
200 SYSCTL_INT(_hw_mwl, OID_AUTO, txbuf, CTLFLAG_RWTUN, &mwl_txbuf,
201 0, "tx buffers allocated");
202 static int mwl_txcoalesce = 8; /* # tx packets to q before poking f/w*/
203 SYSCTL_INT(_hw_mwl, OID_AUTO, txcoalesce, CTLFLAG_RWTUN, &mwl_txcoalesce,
204 0, "tx buffers to send at once");
205 static int mwl_rxquota = MWL_RXBUF; /* # max buffers to process */
206 SYSCTL_INT(_hw_mwl, OID_AUTO, rxquota, CTLFLAG_RWTUN, &mwl_rxquota,
207 0, "max rx buffers to process per interrupt");
208 static int mwl_rxdmalow = 3; /* # min buffers for wakeup */
209 SYSCTL_INT(_hw_mwl, OID_AUTO, rxdmalow, CTLFLAG_RWTUN, &mwl_rxdmalow,
210 0, "min free rx buffers before restarting traffic");
213 static int mwl_debug = 0;
214 SYSCTL_INT(_hw_mwl, OID_AUTO, debug, CTLFLAG_RWTUN, &mwl_debug,
215 0, "control debugging printfs");
217 MWL_DEBUG_XMIT = 0x00000001, /* basic xmit operation */
218 MWL_DEBUG_XMIT_DESC = 0x00000002, /* xmit descriptors */
219 MWL_DEBUG_RECV = 0x00000004, /* basic recv operation */
220 MWL_DEBUG_RECV_DESC = 0x00000008, /* recv descriptors */
221 MWL_DEBUG_RESET = 0x00000010, /* reset processing */
222 MWL_DEBUG_BEACON = 0x00000020, /* beacon handling */
223 MWL_DEBUG_INTR = 0x00000040, /* ISR */
224 MWL_DEBUG_TX_PROC = 0x00000080, /* tx ISR proc */
225 MWL_DEBUG_RX_PROC = 0x00000100, /* rx ISR proc */
226 MWL_DEBUG_KEYCACHE = 0x00000200, /* key cache management */
227 MWL_DEBUG_STATE = 0x00000400, /* 802.11 state transitions */
228 MWL_DEBUG_NODE = 0x00000800, /* node management */
229 MWL_DEBUG_RECV_ALL = 0x00001000, /* trace all frames (beacons) */
230 MWL_DEBUG_TSO = 0x00002000, /* TSO processing */
231 MWL_DEBUG_AMPDU = 0x00004000, /* BA stream handling */
232 MWL_DEBUG_ANY = 0xffffffff
234 #define IS_BEACON(wh) \
235 ((wh->i_fc[0] & (IEEE80211_FC0_TYPE_MASK|IEEE80211_FC0_SUBTYPE_MASK)) == \
236 (IEEE80211_FC0_TYPE_MGT|IEEE80211_FC0_SUBTYPE_BEACON))
237 #define IFF_DUMPPKTS_RECV(sc, wh) \
238 ((sc->sc_debug & MWL_DEBUG_RECV) && \
239 ((sc->sc_debug & MWL_DEBUG_RECV_ALL) || !IS_BEACON(wh)))
240 #define IFF_DUMPPKTS_XMIT(sc) \
241 (sc->sc_debug & MWL_DEBUG_XMIT)
243 #define DPRINTF(sc, m, fmt, ...) do { \
244 if (sc->sc_debug & (m)) \
245 printf(fmt, __VA_ARGS__); \
247 #define KEYPRINTF(sc, hk, mac) do { \
248 if (sc->sc_debug & MWL_DEBUG_KEYCACHE) \
249 mwl_keyprint(sc, __func__, hk, mac); \
251 static void mwl_printrxbuf(const struct mwl_rxbuf *bf, u_int ix);
252 static void mwl_printtxbuf(const struct mwl_txbuf *bf, u_int qnum, u_int ix);
254 #define IFF_DUMPPKTS_RECV(sc, wh) 0
255 #define IFF_DUMPPKTS_XMIT(sc) 0
256 #define DPRINTF(sc, m, fmt, ...) do { (void )sc; } while (0)
257 #define KEYPRINTF(sc, k, mac) do { (void )sc; } while (0)
260 static MALLOC_DEFINE(M_MWLDEV, "mwldev", "mwl driver dma buffers");
263 * Each packet has fixed front matter: a 2-byte length
264 * of the payload, followed by a 4-address 802.11 header
265 * (regardless of the actual header and always w/o any
266 * QoS header). The payload then follows.
270 struct ieee80211_frame_addr4 wh;
274 * Read/Write shorthands for accesses to BAR 0. Note
275 * that all BAR 1 operations are done in the "hal" and
276 * there should be no reference to them here.
279 static __inline uint32_t
280 RD4(struct mwl_softc *sc, bus_size_t off)
282 return bus_space_read_4(sc->sc_io0t, sc->sc_io0h, off);
287 WR4(struct mwl_softc *sc, bus_size_t off, uint32_t val)
289 bus_space_write_4(sc->sc_io0t, sc->sc_io0h, off, val);
293 mwl_attach(uint16_t devid, struct mwl_softc *sc)
295 struct ieee80211com *ic = &sc->sc_ic;
299 DPRINTF(sc, MWL_DEBUG_ANY, "%s: devid 0x%x\n", __func__, devid);
302 * Setup the RX free list lock early, so it can be consistently
307 mh = mwl_hal_attach(sc->sc_dev, devid,
308 sc->sc_io1h, sc->sc_io1t, sc->sc_dmat);
310 device_printf(sc->sc_dev, "unable to attach HAL\n");
316 * Load firmware so we can get setup. We arbitrarily
317 * pick station firmware; we'll re-load firmware as
318 * needed so setting up the wrong mode isn't a big deal.
320 if (mwl_hal_fwload(mh, NULL) != 0) {
321 device_printf(sc->sc_dev, "unable to setup builtin firmware\n");
325 if (mwl_hal_gethwspecs(mh, &sc->sc_hwspecs) != 0) {
326 device_printf(sc->sc_dev, "unable to fetch h/w specs\n");
330 error = mwl_getchannels(sc);
334 sc->sc_txantenna = 0; /* h/w default */
335 sc->sc_rxantenna = 0; /* h/w default */
336 sc->sc_invalid = 0; /* ready to go, enable int handling */
337 sc->sc_ageinterval = MWL_AGEINTERVAL;
340 * Allocate tx+rx descriptors and populate the lists.
341 * We immediately push the information to the firmware
342 * as otherwise it gets upset.
344 error = mwl_dma_setup(sc);
346 device_printf(sc->sc_dev, "failed to setup descriptors: %d\n",
350 error = mwl_setupdma(sc); /* push to firmware */
351 if (error != 0) /* NB: mwl_setupdma prints msg */
354 callout_init(&sc->sc_timer, 1);
355 callout_init_mtx(&sc->sc_watchdog, &sc->sc_mtx, 0);
356 mbufq_init(&sc->sc_snd, ifqmaxlen);
358 sc->sc_tq = taskqueue_create("mwl_taskq", M_NOWAIT,
359 taskqueue_thread_enqueue, &sc->sc_tq);
360 taskqueue_start_threads(&sc->sc_tq, 1, PI_NET,
361 "%s taskq", device_get_nameunit(sc->sc_dev));
363 TASK_INIT(&sc->sc_rxtask, 0, mwl_rx_proc, sc);
364 TASK_INIT(&sc->sc_radartask, 0, mwl_radar_proc, sc);
365 TASK_INIT(&sc->sc_chanswitchtask, 0, mwl_chanswitch_proc, sc);
366 TASK_INIT(&sc->sc_bawatchdogtask, 0, mwl_bawatchdog_proc, sc);
368 /* NB: insure BK queue is the lowest priority h/w queue */
369 if (!mwl_tx_setup(sc, WME_AC_BK, MWL_WME_AC_BK)) {
370 device_printf(sc->sc_dev,
371 "unable to setup xmit queue for %s traffic!\n",
372 ieee80211_wme_acnames[WME_AC_BK]);
376 if (!mwl_tx_setup(sc, WME_AC_BE, MWL_WME_AC_BE) ||
377 !mwl_tx_setup(sc, WME_AC_VI, MWL_WME_AC_VI) ||
378 !mwl_tx_setup(sc, WME_AC_VO, MWL_WME_AC_VO)) {
380 * Not enough hardware tx queues to properly do WME;
381 * just punt and assign them all to the same h/w queue.
382 * We could do a better job of this if, for example,
383 * we allocate queues when we switch from station to
386 if (sc->sc_ac2q[WME_AC_VI] != NULL)
387 mwl_tx_cleanupq(sc, sc->sc_ac2q[WME_AC_VI]);
388 if (sc->sc_ac2q[WME_AC_BE] != NULL)
389 mwl_tx_cleanupq(sc, sc->sc_ac2q[WME_AC_BE]);
390 sc->sc_ac2q[WME_AC_BE] = sc->sc_ac2q[WME_AC_BK];
391 sc->sc_ac2q[WME_AC_VI] = sc->sc_ac2q[WME_AC_BK];
392 sc->sc_ac2q[WME_AC_VO] = sc->sc_ac2q[WME_AC_BK];
394 TASK_INIT(&sc->sc_txtask, 0, mwl_tx_proc, sc);
397 ic->ic_name = device_get_nameunit(sc->sc_dev);
398 /* XXX not right but it's not used anywhere important */
399 ic->ic_phytype = IEEE80211_T_OFDM;
400 ic->ic_opmode = IEEE80211_M_STA;
402 IEEE80211_C_STA /* station mode supported */
403 | IEEE80211_C_HOSTAP /* hostap mode */
404 | IEEE80211_C_MONITOR /* monitor mode */
406 | IEEE80211_C_IBSS /* ibss, nee adhoc, mode */
407 | IEEE80211_C_AHDEMO /* adhoc demo mode */
409 | IEEE80211_C_MBSS /* mesh point link mode */
410 | IEEE80211_C_WDS /* WDS supported */
411 | IEEE80211_C_SHPREAMBLE /* short preamble supported */
412 | IEEE80211_C_SHSLOT /* short slot time supported */
413 | IEEE80211_C_WME /* WME/WMM supported */
414 | IEEE80211_C_BURST /* xmit bursting supported */
415 | IEEE80211_C_WPA /* capable of WPA1+WPA2 */
416 | IEEE80211_C_BGSCAN /* capable of bg scanning */
417 | IEEE80211_C_TXFRAG /* handle tx frags */
418 | IEEE80211_C_TXPMGT /* capable of txpow mgt */
419 | IEEE80211_C_DFS /* DFS supported */
423 IEEE80211_HTCAP_SMPS_ENA /* SM PS mode enabled */
424 | IEEE80211_HTCAP_CHWIDTH40 /* 40MHz channel width */
425 | IEEE80211_HTCAP_SHORTGI20 /* short GI in 20MHz */
426 | IEEE80211_HTCAP_SHORTGI40 /* short GI in 40MHz */
427 | IEEE80211_HTCAP_RXSTBC_2STREAM/* 1-2 spatial streams */
428 #if MWL_AGGR_SIZE == 7935
429 | IEEE80211_HTCAP_MAXAMSDU_7935 /* max A-MSDU length */
431 | IEEE80211_HTCAP_MAXAMSDU_3839 /* max A-MSDU length */
434 | IEEE80211_HTCAP_PSMP /* PSMP supported */
435 | IEEE80211_HTCAP_40INTOLERANT /* 40MHz intolerant */
437 /* s/w capabilities */
438 | IEEE80211_HTC_HT /* HT operation */
439 | IEEE80211_HTC_AMPDU /* tx A-MPDU */
440 | IEEE80211_HTC_AMSDU /* tx A-MSDU */
441 | IEEE80211_HTC_SMPS /* SMPS available */
445 * Mark h/w crypto support.
446 * XXX no way to query h/w support.
448 ic->ic_cryptocaps |= IEEE80211_CRYPTO_WEP
449 | IEEE80211_CRYPTO_AES_CCM
450 | IEEE80211_CRYPTO_TKIP
451 | IEEE80211_CRYPTO_TKIPMIC
454 * Transmit requires space in the packet for a special
455 * format transmit record and optional padding between
456 * this record and the payload. Ask the net80211 layer
457 * to arrange this when encapsulating packets so we can
458 * add it efficiently.
460 ic->ic_headroom = sizeof(struct mwltxrec) -
461 sizeof(struct ieee80211_frame);
463 IEEE80211_ADDR_COPY(ic->ic_macaddr, sc->sc_hwspecs.macAddr);
465 /* call MI attach routine. */
466 ieee80211_ifattach(ic);
467 ic->ic_setregdomain = mwl_setregdomain;
468 ic->ic_getradiocaps = mwl_getradiocaps;
469 /* override default methods */
470 ic->ic_raw_xmit = mwl_raw_xmit;
471 ic->ic_newassoc = mwl_newassoc;
472 ic->ic_updateslot = mwl_updateslot;
473 ic->ic_update_mcast = mwl_update_mcast;
474 ic->ic_update_promisc = mwl_update_promisc;
475 ic->ic_wme.wme_update = mwl_wme_update;
476 ic->ic_transmit = mwl_transmit;
477 ic->ic_ioctl = mwl_ioctl;
478 ic->ic_parent = mwl_parent;
480 ic->ic_node_alloc = mwl_node_alloc;
481 sc->sc_node_cleanup = ic->ic_node_cleanup;
482 ic->ic_node_cleanup = mwl_node_cleanup;
483 sc->sc_node_drain = ic->ic_node_drain;
484 ic->ic_node_drain = mwl_node_drain;
485 ic->ic_node_getsignal = mwl_node_getsignal;
486 ic->ic_node_getmimoinfo = mwl_node_getmimoinfo;
488 ic->ic_scan_start = mwl_scan_start;
489 ic->ic_scan_end = mwl_scan_end;
490 ic->ic_set_channel = mwl_set_channel;
492 sc->sc_recv_action = ic->ic_recv_action;
493 ic->ic_recv_action = mwl_recv_action;
494 sc->sc_addba_request = ic->ic_addba_request;
495 ic->ic_addba_request = mwl_addba_request;
496 sc->sc_addba_response = ic->ic_addba_response;
497 ic->ic_addba_response = mwl_addba_response;
498 sc->sc_addba_stop = ic->ic_addba_stop;
499 ic->ic_addba_stop = mwl_addba_stop;
501 ic->ic_vap_create = mwl_vap_create;
502 ic->ic_vap_delete = mwl_vap_delete;
504 ieee80211_radiotap_attach(ic,
505 &sc->sc_tx_th.wt_ihdr, sizeof(sc->sc_tx_th),
506 MWL_TX_RADIOTAP_PRESENT,
507 &sc->sc_rx_th.wr_ihdr, sizeof(sc->sc_rx_th),
508 MWL_RX_RADIOTAP_PRESENT);
510 * Setup dynamic sysctl's now that country code and
511 * regdomain are available from the hal.
513 mwl_sysctlattach(sc);
516 ieee80211_announce(ic);
524 MWL_RXFREE_DESTROY(sc);
530 mwl_detach(struct mwl_softc *sc)
532 struct ieee80211com *ic = &sc->sc_ic;
538 * NB: the order of these is important:
539 * o call the 802.11 layer before detaching the hal to
540 * insure callbacks into the driver to delete global
541 * key cache entries can be handled
542 * o reclaim the tx queue data structures after calling
543 * the 802.11 layer as we'll get called back to reclaim
544 * node state and potentially want to use them
545 * o to cleanup the tx queues the hal is called, so detach
547 * Other than that, it's straightforward...
549 ieee80211_ifdetach(ic);
550 callout_drain(&sc->sc_watchdog);
552 MWL_RXFREE_DESTROY(sc);
554 mwl_hal_detach(sc->sc_mh);
555 mbufq_drain(&sc->sc_snd);
561 * MAC address handling for multiple BSS on the same radio.
562 * The first vap uses the MAC address from the EEPROM. For
563 * subsequent vap's we set the U/L bit (bit 1) in the MAC
564 * address and use the next six bits as an index.
567 assign_address(struct mwl_softc *sc, uint8_t mac[IEEE80211_ADDR_LEN], int clone)
571 if (clone && mwl_hal_ismbsscapable(sc->sc_mh)) {
572 /* NB: we only do this if h/w supports multiple bssid */
573 for (i = 0; i < 32; i++)
574 if ((sc->sc_bssidmask & (1<<i)) == 0)
577 mac[0] |= (i << 2)|0x2;
580 sc->sc_bssidmask |= 1<<i;
586 reclaim_address(struct mwl_softc *sc, const uint8_t mac[IEEE80211_ADDR_LEN])
589 if (i != 0 || --sc->sc_nbssid0 == 0)
590 sc->sc_bssidmask &= ~(1<<i);
593 static struct ieee80211vap *
594 mwl_vap_create(struct ieee80211com *ic, const char name[IFNAMSIZ], int unit,
595 enum ieee80211_opmode opmode, int flags,
596 const uint8_t bssid[IEEE80211_ADDR_LEN],
597 const uint8_t mac0[IEEE80211_ADDR_LEN])
599 struct mwl_softc *sc = ic->ic_softc;
600 struct mwl_hal *mh = sc->sc_mh;
601 struct ieee80211vap *vap, *apvap;
602 struct mwl_hal_vap *hvap;
604 uint8_t mac[IEEE80211_ADDR_LEN];
606 IEEE80211_ADDR_COPY(mac, mac0);
608 case IEEE80211_M_HOSTAP:
609 case IEEE80211_M_MBSS:
610 if ((flags & IEEE80211_CLONE_MACADDR) == 0)
611 assign_address(sc, mac, flags & IEEE80211_CLONE_BSSID);
612 hvap = mwl_hal_newvap(mh, MWL_HAL_AP, mac);
614 if ((flags & IEEE80211_CLONE_MACADDR) == 0)
615 reclaim_address(sc, mac);
619 case IEEE80211_M_STA:
620 if ((flags & IEEE80211_CLONE_MACADDR) == 0)
621 assign_address(sc, mac, flags & IEEE80211_CLONE_BSSID);
622 hvap = mwl_hal_newvap(mh, MWL_HAL_STA, mac);
624 if ((flags & IEEE80211_CLONE_MACADDR) == 0)
625 reclaim_address(sc, mac);
628 /* no h/w beacon miss support; always use s/w */
629 flags |= IEEE80211_CLONE_NOBEACONS;
631 case IEEE80211_M_WDS:
632 hvap = NULL; /* NB: we use associated AP vap */
633 if (sc->sc_napvaps == 0)
634 return NULL; /* no existing AP vap */
636 case IEEE80211_M_MONITOR:
639 case IEEE80211_M_IBSS:
640 case IEEE80211_M_AHDEMO:
645 mvp = malloc(sizeof(struct mwl_vap), M_80211_VAP, M_WAITOK | M_ZERO);
647 if (opmode == IEEE80211_M_WDS) {
649 * WDS vaps must have an associated AP vap; find one.
652 TAILQ_FOREACH(apvap, &ic->ic_vaps, iv_next)
653 if (apvap->iv_opmode == IEEE80211_M_HOSTAP) {
654 mvp->mv_ap_hvap = MWL_VAP(apvap)->mv_hvap;
657 KASSERT(mvp->mv_ap_hvap != NULL, ("no ap vap"));
660 ieee80211_vap_setup(ic, vap, name, unit, opmode, flags, bssid);
661 /* override with driver methods */
662 mvp->mv_newstate = vap->iv_newstate;
663 vap->iv_newstate = mwl_newstate;
664 vap->iv_max_keyix = 0; /* XXX */
665 vap->iv_key_alloc = mwl_key_alloc;
666 vap->iv_key_delete = mwl_key_delete;
667 vap->iv_key_set = mwl_key_set;
668 #ifdef MWL_HOST_PS_SUPPORT
669 if (opmode == IEEE80211_M_HOSTAP || opmode == IEEE80211_M_MBSS) {
670 vap->iv_update_ps = mwl_update_ps;
671 mvp->mv_set_tim = vap->iv_set_tim;
672 vap->iv_set_tim = mwl_set_tim;
675 vap->iv_reset = mwl_reset;
676 vap->iv_update_beacon = mwl_beacon_update;
678 /* override max aid so sta's cannot assoc when we're out of sta id's */
679 vap->iv_max_aid = MWL_MAXSTAID;
680 /* override default A-MPDU rx parameters */
681 vap->iv_ampdu_rxmax = IEEE80211_HTCAP_MAXRXAMPDU_64K;
682 vap->iv_ampdu_density = IEEE80211_HTCAP_MPDUDENSITY_4;
685 ieee80211_vap_attach(vap, mwl_media_change, ieee80211_media_status,
688 switch (vap->iv_opmode) {
689 case IEEE80211_M_HOSTAP:
690 case IEEE80211_M_MBSS:
691 case IEEE80211_M_STA:
693 * Setup sta db entry for local address.
696 if (vap->iv_opmode == IEEE80211_M_HOSTAP ||
697 vap->iv_opmode == IEEE80211_M_MBSS)
702 case IEEE80211_M_WDS:
709 * Setup overall operating mode.
712 ic->ic_opmode = IEEE80211_M_HOSTAP;
713 else if (sc->sc_nstavaps)
714 ic->ic_opmode = IEEE80211_M_STA;
716 ic->ic_opmode = opmode;
722 mwl_vap_delete(struct ieee80211vap *vap)
724 struct mwl_vap *mvp = MWL_VAP(vap);
725 struct mwl_softc *sc = vap->iv_ic->ic_softc;
726 struct mwl_hal *mh = sc->sc_mh;
727 struct mwl_hal_vap *hvap = mvp->mv_hvap;
728 enum ieee80211_opmode opmode = vap->iv_opmode;
730 /* XXX disallow ap vap delete if WDS still present */
731 if (sc->sc_running) {
732 /* quiesce h/w while we remove the vap */
733 mwl_hal_intrset(mh, 0); /* disable interrupts */
735 ieee80211_vap_detach(vap);
737 case IEEE80211_M_HOSTAP:
738 case IEEE80211_M_MBSS:
739 case IEEE80211_M_STA:
740 KASSERT(hvap != NULL, ("no hal vap handle"));
741 (void) mwl_hal_delstation(hvap, vap->iv_myaddr);
742 mwl_hal_delvap(hvap);
743 if (opmode == IEEE80211_M_HOSTAP || opmode == IEEE80211_M_MBSS)
747 /* XXX don't do it for IEEE80211_CLONE_MACADDR */
748 reclaim_address(sc, vap->iv_myaddr);
750 case IEEE80211_M_WDS:
756 mwl_cleartxq(sc, vap);
757 free(mvp, M_80211_VAP);
759 mwl_hal_intrset(mh, sc->sc_imask);
763 mwl_suspend(struct mwl_softc *sc)
772 mwl_resume(struct mwl_softc *sc)
777 if (sc->sc_ic.ic_nrunning > 0)
778 error = mwl_init(sc);
782 ieee80211_start_all(&sc->sc_ic); /* start all vap's */
786 mwl_shutdown(void *arg)
788 struct mwl_softc *sc = arg;
796 * Interrupt handler. Most of the actual processing is deferred.
801 struct mwl_softc *sc = arg;
802 struct mwl_hal *mh = sc->sc_mh;
805 if (sc->sc_invalid) {
807 * The hardware is not ready/present, don't touch anything.
808 * Note this can happen early on if the IRQ is shared.
810 DPRINTF(sc, MWL_DEBUG_ANY, "%s: invalid; ignored\n", __func__);
814 * Figure out the reason(s) for the interrupt.
816 mwl_hal_getisr(mh, &status); /* NB: clears ISR too */
817 if (status == 0) /* must be a shared irq */
820 DPRINTF(sc, MWL_DEBUG_INTR, "%s: status 0x%x imask 0x%x\n",
821 __func__, status, sc->sc_imask);
822 if (status & MACREG_A2HRIC_BIT_RX_RDY)
823 taskqueue_enqueue(sc->sc_tq, &sc->sc_rxtask);
824 if (status & MACREG_A2HRIC_BIT_TX_DONE)
825 taskqueue_enqueue(sc->sc_tq, &sc->sc_txtask);
826 if (status & MACREG_A2HRIC_BIT_BA_WATCHDOG)
827 taskqueue_enqueue(sc->sc_tq, &sc->sc_bawatchdogtask);
828 if (status & MACREG_A2HRIC_BIT_OPC_DONE)
830 if (status & MACREG_A2HRIC_BIT_MAC_EVENT) {
833 if (status & MACREG_A2HRIC_BIT_ICV_ERROR) {
835 sc->sc_stats.mst_rx_badtkipicv++;
837 if (status & MACREG_A2HRIC_BIT_QUEUE_EMPTY) {
838 /* 11n aggregation queue is empty, re-fill */
841 if (status & MACREG_A2HRIC_BIT_QUEUE_FULL) {
844 if (status & MACREG_A2HRIC_BIT_RADAR_DETECT) {
845 /* radar detected, process event */
846 taskqueue_enqueue(sc->sc_tq, &sc->sc_radartask);
848 if (status & MACREG_A2HRIC_BIT_CHAN_SWITCH) {
849 /* DFS channel switch */
850 taskqueue_enqueue(sc->sc_tq, &sc->sc_chanswitchtask);
855 mwl_radar_proc(void *arg, int pending)
857 struct mwl_softc *sc = arg;
858 struct ieee80211com *ic = &sc->sc_ic;
860 DPRINTF(sc, MWL_DEBUG_ANY, "%s: radar detected, pending %u\n",
863 sc->sc_stats.mst_radardetect++;
864 /* XXX stop h/w BA streams? */
867 ieee80211_dfs_notify_radar(ic, ic->ic_curchan);
868 IEEE80211_UNLOCK(ic);
872 mwl_chanswitch_proc(void *arg, int pending)
874 struct mwl_softc *sc = arg;
875 struct ieee80211com *ic = &sc->sc_ic;
877 DPRINTF(sc, MWL_DEBUG_ANY, "%s: channel switch notice, pending %u\n",
881 sc->sc_csapending = 0;
882 ieee80211_csa_completeswitch(ic);
883 IEEE80211_UNLOCK(ic);
887 mwl_bawatchdog(const MWL_HAL_BASTREAM *sp)
889 struct ieee80211_node *ni = sp->data[0];
891 /* send DELBA and drop the stream */
892 ieee80211_ampdu_stop(ni, sp->data[1], IEEE80211_REASON_UNSPECIFIED);
896 mwl_bawatchdog_proc(void *arg, int pending)
898 struct mwl_softc *sc = arg;
899 struct mwl_hal *mh = sc->sc_mh;
900 const MWL_HAL_BASTREAM *sp;
903 sc->sc_stats.mst_bawatchdog++;
905 if (mwl_hal_getwatchdogbitmap(mh, &bitmap) != 0) {
906 DPRINTF(sc, MWL_DEBUG_AMPDU,
907 "%s: could not get bitmap\n", __func__);
908 sc->sc_stats.mst_bawatchdog_failed++;
911 DPRINTF(sc, MWL_DEBUG_AMPDU, "%s: bitmap 0x%x\n", __func__, bitmap);
912 if (bitmap == 0xff) {
914 /* disable all ba streams */
915 for (bitmap = 0; bitmap < 8; bitmap++) {
916 sp = mwl_hal_bastream_lookup(mh, bitmap);
923 DPRINTF(sc, MWL_DEBUG_AMPDU,
924 "%s: no BA streams found\n", __func__);
925 sc->sc_stats.mst_bawatchdog_empty++;
927 } else if (bitmap != 0xaa) {
928 /* disable a single ba stream */
929 sp = mwl_hal_bastream_lookup(mh, bitmap);
933 DPRINTF(sc, MWL_DEBUG_AMPDU,
934 "%s: no BA stream %d\n", __func__, bitmap);
935 sc->sc_stats.mst_bawatchdog_notfound++;
941 * Convert net80211 channel to a HAL channel.
944 mwl_mapchan(MWL_HAL_CHANNEL *hc, const struct ieee80211_channel *chan)
946 hc->channel = chan->ic_ieee;
948 *(uint32_t *)&hc->channelFlags = 0;
949 if (IEEE80211_IS_CHAN_2GHZ(chan))
950 hc->channelFlags.FreqBand = MWL_FREQ_BAND_2DOT4GHZ;
951 else if (IEEE80211_IS_CHAN_5GHZ(chan))
952 hc->channelFlags.FreqBand = MWL_FREQ_BAND_5GHZ;
953 if (IEEE80211_IS_CHAN_HT40(chan)) {
954 hc->channelFlags.ChnlWidth = MWL_CH_40_MHz_WIDTH;
955 if (IEEE80211_IS_CHAN_HT40U(chan))
956 hc->channelFlags.ExtChnlOffset = MWL_EXT_CH_ABOVE_CTRL_CH;
958 hc->channelFlags.ExtChnlOffset = MWL_EXT_CH_BELOW_CTRL_CH;
960 hc->channelFlags.ChnlWidth = MWL_CH_20_MHz_WIDTH;
961 /* XXX 10MHz channels */
965 * Inform firmware of our tx/rx dma setup. The BAR 0
966 * writes below are for compatibility with older firmware.
967 * For current firmware we send this information with a
968 * cmd block via mwl_hal_sethwdma.
971 mwl_setupdma(struct mwl_softc *sc)
975 sc->sc_hwdma.rxDescRead = sc->sc_rxdma.dd_desc_paddr;
976 WR4(sc, sc->sc_hwspecs.rxDescRead, sc->sc_hwdma.rxDescRead);
977 WR4(sc, sc->sc_hwspecs.rxDescWrite, sc->sc_hwdma.rxDescRead);
979 for (i = 0; i < MWL_NUM_TX_QUEUES-MWL_NUM_ACK_QUEUES; i++) {
980 struct mwl_txq *txq = &sc->sc_txq[i];
981 sc->sc_hwdma.wcbBase[i] = txq->dma.dd_desc_paddr;
982 WR4(sc, sc->sc_hwspecs.wcbBase[i], sc->sc_hwdma.wcbBase[i]);
984 sc->sc_hwdma.maxNumTxWcb = mwl_txbuf;
985 sc->sc_hwdma.maxNumWCB = MWL_NUM_TX_QUEUES-MWL_NUM_ACK_QUEUES;
987 error = mwl_hal_sethwdma(sc->sc_mh, &sc->sc_hwdma);
989 device_printf(sc->sc_dev,
990 "unable to setup tx/rx dma; hal status %u\n", error);
997 * Inform firmware of tx rate parameters.
998 * Called after a channel change.
1001 mwl_setcurchanrates(struct mwl_softc *sc)
1003 struct ieee80211com *ic = &sc->sc_ic;
1004 const struct ieee80211_rateset *rs;
1005 MWL_HAL_TXRATE rates;
1007 memset(&rates, 0, sizeof(rates));
1008 rs = ieee80211_get_suprates(ic, ic->ic_curchan);
1009 /* rate used to send management frames */
1010 rates.MgtRate = rs->rs_rates[0] & IEEE80211_RATE_VAL;
1011 /* rate used to send multicast frames */
1012 rates.McastRate = rates.MgtRate;
1014 return mwl_hal_settxrate_auto(sc->sc_mh, &rates);
1018 * Inform firmware of tx rate parameters. Called whenever
1019 * user-settable params change and after a channel change.
1022 mwl_setrates(struct ieee80211vap *vap)
1024 struct mwl_vap *mvp = MWL_VAP(vap);
1025 struct ieee80211_node *ni = vap->iv_bss;
1026 const struct ieee80211_txparam *tp = ni->ni_txparms;
1027 MWL_HAL_TXRATE rates;
1029 KASSERT(vap->iv_state == IEEE80211_S_RUN, ("state %d", vap->iv_state));
1032 * Update the h/w rate map.
1033 * NB: 0x80 for MCS is passed through unchanged
1035 memset(&rates, 0, sizeof(rates));
1036 /* rate used to send management frames */
1037 rates.MgtRate = tp->mgmtrate;
1038 /* rate used to send multicast frames */
1039 rates.McastRate = tp->mcastrate;
1041 /* while here calculate EAPOL fixed rate cookie */
1042 mvp->mv_eapolformat = htole16(mwl_calcformat(rates.MgtRate, ni));
1044 return mwl_hal_settxrate(mvp->mv_hvap,
1045 tp->ucastrate != IEEE80211_FIXED_RATE_NONE ?
1046 RATE_FIXED : RATE_AUTO, &rates);
1050 * Setup a fixed xmit rate cookie for EAPOL frames.
1053 mwl_seteapolformat(struct ieee80211vap *vap)
1055 struct mwl_vap *mvp = MWL_VAP(vap);
1056 struct ieee80211_node *ni = vap->iv_bss;
1057 enum ieee80211_phymode mode;
1060 KASSERT(vap->iv_state == IEEE80211_S_RUN, ("state %d", vap->iv_state));
1062 mode = ieee80211_chan2mode(ni->ni_chan);
1064 * Use legacy rates when operating a mixed HT+non-HT bss.
1065 * NB: this may violate POLA for sta and wds vap's.
1067 if (mode == IEEE80211_MODE_11NA &&
1068 (vap->iv_flags_ht & IEEE80211_FHT_PUREN) == 0)
1069 rate = vap->iv_txparms[IEEE80211_MODE_11A].mgmtrate;
1070 else if (mode == IEEE80211_MODE_11NG &&
1071 (vap->iv_flags_ht & IEEE80211_FHT_PUREN) == 0)
1072 rate = vap->iv_txparms[IEEE80211_MODE_11G].mgmtrate;
1074 rate = vap->iv_txparms[mode].mgmtrate;
1076 mvp->mv_eapolformat = htole16(mwl_calcformat(rate, ni));
1080 * Map SKU+country code to region code for radar bin'ing.
1083 mwl_map2regioncode(const struct ieee80211_regdomain *rd)
1085 switch (rd->regdomain) {
1088 return DOMAIN_CODE_FCC;
1090 return DOMAIN_CODE_IC;
1094 if (rd->country == CTRY_SPAIN)
1095 return DOMAIN_CODE_SPAIN;
1096 if (rd->country == CTRY_FRANCE || rd->country == CTRY_FRANCE2)
1097 return DOMAIN_CODE_FRANCE;
1098 /* XXX force 1.3.1 radar type */
1099 return DOMAIN_CODE_ETSI_131;
1101 return DOMAIN_CODE_MKK;
1103 return DOMAIN_CODE_DGT; /* Taiwan */
1107 return DOMAIN_CODE_AUS; /* Australia */
1110 return DOMAIN_CODE_FCC; /* XXX? */
1114 mwl_hal_reset(struct mwl_softc *sc)
1116 struct ieee80211com *ic = &sc->sc_ic;
1117 struct mwl_hal *mh = sc->sc_mh;
1119 mwl_hal_setantenna(mh, WL_ANTENNATYPE_RX, sc->sc_rxantenna);
1120 mwl_hal_setantenna(mh, WL_ANTENNATYPE_TX, sc->sc_txantenna);
1121 mwl_hal_setradio(mh, 1, WL_AUTO_PREAMBLE);
1122 mwl_hal_setwmm(sc->sc_mh, (ic->ic_flags & IEEE80211_F_WME) != 0);
1123 mwl_chan_set(sc, ic->ic_curchan);
1124 /* NB: RF/RA performance tuned for indoor mode */
1125 mwl_hal_setrateadaptmode(mh, 0);
1126 mwl_hal_setoptimizationlevel(mh,
1127 (ic->ic_flags & IEEE80211_F_BURST) != 0);
1129 mwl_hal_setregioncode(mh, mwl_map2regioncode(&ic->ic_regdomain));
1131 mwl_hal_setaggampduratemode(mh, 1, 80); /* XXX */
1132 mwl_hal_setcfend(mh, 0); /* XXX */
1138 mwl_init(struct mwl_softc *sc)
1140 struct mwl_hal *mh = sc->sc_mh;
1143 MWL_LOCK_ASSERT(sc);
1146 * Stop anything previously setup. This is safe
1147 * whether this is the first time through or not.
1152 * Push vap-independent state to the firmware.
1154 if (!mwl_hal_reset(sc)) {
1155 device_printf(sc->sc_dev, "unable to reset hardware\n");
1160 * Setup recv (once); transmit is already good to go.
1162 error = mwl_startrecv(sc);
1164 device_printf(sc->sc_dev, "unable to start recv logic\n");
1169 * Enable interrupts.
1171 sc->sc_imask = MACREG_A2HRIC_BIT_RX_RDY
1172 | MACREG_A2HRIC_BIT_TX_DONE
1173 | MACREG_A2HRIC_BIT_OPC_DONE
1175 | MACREG_A2HRIC_BIT_MAC_EVENT
1177 | MACREG_A2HRIC_BIT_ICV_ERROR
1178 | MACREG_A2HRIC_BIT_RADAR_DETECT
1179 | MACREG_A2HRIC_BIT_CHAN_SWITCH
1181 | MACREG_A2HRIC_BIT_QUEUE_EMPTY
1183 | MACREG_A2HRIC_BIT_BA_WATCHDOG
1184 | MACREQ_A2HRIC_BIT_TX_ACK
1188 mwl_hal_intrset(mh, sc->sc_imask);
1189 callout_reset(&sc->sc_watchdog, hz, mwl_watchdog, sc);
1195 mwl_stop(struct mwl_softc *sc)
1198 MWL_LOCK_ASSERT(sc);
1199 if (sc->sc_running) {
1201 * Shutdown the hardware and driver.
1204 callout_stop(&sc->sc_watchdog);
1205 sc->sc_tx_timer = 0;
1211 mwl_reset_vap(struct ieee80211vap *vap, int state)
1213 struct mwl_hal_vap *hvap = MWL_VAP(vap)->mv_hvap;
1214 struct ieee80211com *ic = vap->iv_ic;
1216 if (state == IEEE80211_S_RUN)
1219 mwl_hal_setrtsthreshold(hvap, vap->iv_rtsthreshold);
1220 /* XXX auto? 20/40 split? */
1221 mwl_hal_sethtgi(hvap, (vap->iv_flags_ht &
1222 (IEEE80211_FHT_SHORTGI20|IEEE80211_FHT_SHORTGI40)) ? 1 : 0);
1223 mwl_hal_setnprot(hvap, ic->ic_htprotmode == IEEE80211_PROT_NONE ?
1224 HTPROTECT_NONE : HTPROTECT_AUTO);
1225 /* XXX txpower cap */
1227 /* re-setup beacons */
1228 if (state == IEEE80211_S_RUN &&
1229 (vap->iv_opmode == IEEE80211_M_HOSTAP ||
1230 vap->iv_opmode == IEEE80211_M_MBSS ||
1231 vap->iv_opmode == IEEE80211_M_IBSS)) {
1232 mwl_setapmode(vap, vap->iv_bss->ni_chan);
1233 mwl_hal_setnprotmode(hvap,
1234 MS(ic->ic_curhtprotmode, IEEE80211_HTINFO_OPMODE));
1235 return mwl_beacon_setup(vap);
1241 * Reset the hardware w/o losing operational state.
1242 * Used to to reset or reload hardware state for a vap.
1245 mwl_reset(struct ieee80211vap *vap, u_long cmd)
1247 struct mwl_hal_vap *hvap = MWL_VAP(vap)->mv_hvap;
1250 if (hvap != NULL) { /* WDS, MONITOR, etc. */
1251 struct ieee80211com *ic = vap->iv_ic;
1252 struct mwl_softc *sc = ic->ic_softc;
1253 struct mwl_hal *mh = sc->sc_mh;
1255 /* XXX handle DWDS sta vap change */
1256 /* XXX do we need to disable interrupts? */
1257 mwl_hal_intrset(mh, 0); /* disable interrupts */
1258 error = mwl_reset_vap(vap, vap->iv_state);
1259 mwl_hal_intrset(mh, sc->sc_imask);
1265 * Allocate a tx buffer for sending a frame. The
1266 * packet is assumed to have the WME AC stored so
1267 * we can use it to select the appropriate h/w queue.
1269 static struct mwl_txbuf *
1270 mwl_gettxbuf(struct mwl_softc *sc, struct mwl_txq *txq)
1272 struct mwl_txbuf *bf;
1275 * Grab a TX buffer and associated resources.
1278 bf = STAILQ_FIRST(&txq->free);
1280 STAILQ_REMOVE_HEAD(&txq->free, bf_list);
1283 MWL_TXQ_UNLOCK(txq);
1285 DPRINTF(sc, MWL_DEBUG_XMIT,
1286 "%s: out of xmit buffers on q %d\n", __func__, txq->qnum);
1291 * Return a tx buffer to the queue it came from. Note there
1292 * are two cases because we must preserve the order of buffers
1293 * as it reflects the fixed order of descriptors in memory
1294 * (the firmware pre-fetches descriptors so we cannot reorder).
1297 mwl_puttxbuf_head(struct mwl_txq *txq, struct mwl_txbuf *bf)
1302 STAILQ_INSERT_HEAD(&txq->free, bf, bf_list);
1304 MWL_TXQ_UNLOCK(txq);
1308 mwl_puttxbuf_tail(struct mwl_txq *txq, struct mwl_txbuf *bf)
1313 STAILQ_INSERT_TAIL(&txq->free, bf, bf_list);
1315 MWL_TXQ_UNLOCK(txq);
1319 mwl_transmit(struct ieee80211com *ic, struct mbuf *m)
1321 struct mwl_softc *sc = ic->ic_softc;
1325 if (!sc->sc_running) {
1329 error = mbufq_enqueue(&sc->sc_snd, m);
1340 mwl_start(struct mwl_softc *sc)
1342 struct ieee80211_node *ni;
1343 struct mwl_txbuf *bf;
1345 struct mwl_txq *txq = NULL; /* XXX silence gcc */
1348 MWL_LOCK_ASSERT(sc);
1349 if (!sc->sc_running || sc->sc_invalid)
1352 while ((m = mbufq_dequeue(&sc->sc_snd)) != NULL) {
1354 * Grab the node for the destination.
1356 ni = (struct ieee80211_node *) m->m_pkthdr.rcvif;
1357 KASSERT(ni != NULL, ("no node"));
1358 m->m_pkthdr.rcvif = NULL; /* committed, clear ref */
1360 * Grab a TX buffer and associated resources.
1361 * We honor the classification by the 802.11 layer.
1363 txq = sc->sc_ac2q[M_WME_GETAC(m)];
1364 bf = mwl_gettxbuf(sc, txq);
1367 ieee80211_free_node(ni);
1368 #ifdef MWL_TX_NODROP
1369 sc->sc_stats.mst_tx_qstop++;
1372 DPRINTF(sc, MWL_DEBUG_XMIT,
1373 "%s: tail drop on q %d\n", __func__, txq->qnum);
1374 sc->sc_stats.mst_tx_qdrop++;
1376 #endif /* MWL_TX_NODROP */
1380 * Pass the frame to the h/w for transmission.
1382 if (mwl_tx_start(sc, ni, bf, m)) {
1383 if_inc_counter(ni->ni_vap->iv_ifp,
1384 IFCOUNTER_OERRORS, 1);
1385 mwl_puttxbuf_head(txq, bf);
1386 ieee80211_free_node(ni);
1390 if (nqueued >= mwl_txcoalesce) {
1392 * Poke the firmware to process queued frames;
1393 * see below about (lack of) locking.
1396 mwl_hal_txstart(sc->sc_mh, 0/*XXX*/);
1401 * NB: We don't need to lock against tx done because
1402 * this just prods the firmware to check the transmit
1403 * descriptors. The firmware will also start fetching
1404 * descriptors by itself if it notices new ones are
1405 * present when it goes to deliver a tx done interrupt
1406 * to the host. So if we race with tx done processing
1407 * it's ok. Delivering the kick here rather than in
1408 * mwl_tx_start is an optimization to avoid poking the
1409 * firmware for each packet.
1411 * NB: the queue id isn't used so 0 is ok.
1413 mwl_hal_txstart(sc->sc_mh, 0/*XXX*/);
1418 mwl_raw_xmit(struct ieee80211_node *ni, struct mbuf *m,
1419 const struct ieee80211_bpf_params *params)
1421 struct ieee80211com *ic = ni->ni_ic;
1422 struct mwl_softc *sc = ic->ic_softc;
1423 struct mwl_txbuf *bf;
1424 struct mwl_txq *txq;
1426 if (!sc->sc_running || sc->sc_invalid) {
1431 * Grab a TX buffer and associated resources.
1432 * Note that we depend on the classification
1433 * by the 802.11 layer to get to the right h/w
1434 * queue. Management frames must ALWAYS go on
1435 * queue 1 but we cannot just force that here
1436 * because we may receive non-mgt frames.
1438 txq = sc->sc_ac2q[M_WME_GETAC(m)];
1439 bf = mwl_gettxbuf(sc, txq);
1441 sc->sc_stats.mst_tx_qstop++;
1446 * Pass the frame to the h/w for transmission.
1448 if (mwl_tx_start(sc, ni, bf, m)) {
1449 mwl_puttxbuf_head(txq, bf);
1451 return EIO; /* XXX */
1454 * NB: We don't need to lock against tx done because
1455 * this just prods the firmware to check the transmit
1456 * descriptors. The firmware will also start fetching
1457 * descriptors by itself if it notices new ones are
1458 * present when it goes to deliver a tx done interrupt
1459 * to the host. So if we race with tx done processing
1460 * it's ok. Delivering the kick here rather than in
1461 * mwl_tx_start is an optimization to avoid poking the
1462 * firmware for each packet.
1464 * NB: the queue id isn't used so 0 is ok.
1466 mwl_hal_txstart(sc->sc_mh, 0/*XXX*/);
1471 mwl_media_change(struct ifnet *ifp)
1473 struct ieee80211vap *vap = ifp->if_softc;
1476 error = ieee80211_media_change(ifp);
1477 /* NB: only the fixed rate can change and that doesn't need a reset */
1478 if (error == ENETRESET) {
1487 mwl_keyprint(struct mwl_softc *sc, const char *tag,
1488 const MWL_HAL_KEYVAL *hk, const uint8_t mac[IEEE80211_ADDR_LEN])
1490 static const char *ciphers[] = {
1497 printf("%s: [%u] %-7s", tag, hk->keyIndex, ciphers[hk->keyTypeId]);
1498 for (i = 0, n = hk->keyLen; i < n; i++)
1499 printf(" %02x", hk->key.aes[i]);
1500 printf(" mac %s", ether_sprintf(mac));
1501 if (hk->keyTypeId == KEY_TYPE_ID_TKIP) {
1502 printf(" %s", "rxmic");
1503 for (i = 0; i < sizeof(hk->key.tkip.rxMic); i++)
1504 printf(" %02x", hk->key.tkip.rxMic[i]);
1506 for (i = 0; i < sizeof(hk->key.tkip.txMic); i++)
1507 printf(" %02x", hk->key.tkip.txMic[i]);
1509 printf(" flags 0x%x\n", hk->keyFlags);
1514 * Allocate a key cache slot for a unicast key. The
1515 * firmware handles key allocation and every station is
1516 * guaranteed key space so we are always successful.
1519 mwl_key_alloc(struct ieee80211vap *vap, struct ieee80211_key *k,
1520 ieee80211_keyix *keyix, ieee80211_keyix *rxkeyix)
1522 struct mwl_softc *sc = vap->iv_ic->ic_softc;
1524 if (k->wk_keyix != IEEE80211_KEYIX_NONE ||
1525 (k->wk_flags & IEEE80211_KEY_GROUP)) {
1526 if (!(&vap->iv_nw_keys[0] <= k &&
1527 k < &vap->iv_nw_keys[IEEE80211_WEP_NKID])) {
1528 /* should not happen */
1529 DPRINTF(sc, MWL_DEBUG_KEYCACHE,
1530 "%s: bogus group key\n", __func__);
1533 /* give the caller what they requested */
1534 *keyix = *rxkeyix = ieee80211_crypto_get_key_wepidx(vap, k);
1537 * Firmware handles key allocation.
1539 *keyix = *rxkeyix = 0;
1545 * Delete a key entry allocated by mwl_key_alloc.
1548 mwl_key_delete(struct ieee80211vap *vap, const struct ieee80211_key *k)
1550 struct mwl_softc *sc = vap->iv_ic->ic_softc;
1551 struct mwl_hal_vap *hvap = MWL_VAP(vap)->mv_hvap;
1553 const uint8_t bcastaddr[IEEE80211_ADDR_LEN] =
1554 { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
1557 if (vap->iv_opmode != IEEE80211_M_WDS) {
1558 /* XXX monitor mode? */
1559 DPRINTF(sc, MWL_DEBUG_KEYCACHE,
1560 "%s: no hvap for opmode %d\n", __func__,
1564 hvap = MWL_VAP(vap)->mv_ap_hvap;
1567 DPRINTF(sc, MWL_DEBUG_KEYCACHE, "%s: delete key %u\n",
1568 __func__, k->wk_keyix);
1570 memset(&hk, 0, sizeof(hk));
1571 hk.keyIndex = k->wk_keyix;
1572 switch (k->wk_cipher->ic_cipher) {
1573 case IEEE80211_CIPHER_WEP:
1574 hk.keyTypeId = KEY_TYPE_ID_WEP;
1576 case IEEE80211_CIPHER_TKIP:
1577 hk.keyTypeId = KEY_TYPE_ID_TKIP;
1579 case IEEE80211_CIPHER_AES_CCM:
1580 hk.keyTypeId = KEY_TYPE_ID_AES;
1583 /* XXX should not happen */
1584 DPRINTF(sc, MWL_DEBUG_KEYCACHE, "%s: unknown cipher %d\n",
1585 __func__, k->wk_cipher->ic_cipher);
1588 return (mwl_hal_keyreset(hvap, &hk, bcastaddr) == 0); /*XXX*/
1592 addgroupflags(MWL_HAL_KEYVAL *hk, const struct ieee80211_key *k)
1594 if (k->wk_flags & IEEE80211_KEY_GROUP) {
1595 if (k->wk_flags & IEEE80211_KEY_XMIT)
1596 hk->keyFlags |= KEY_FLAG_TXGROUPKEY;
1597 if (k->wk_flags & IEEE80211_KEY_RECV)
1598 hk->keyFlags |= KEY_FLAG_RXGROUPKEY;
1605 * Set the key cache contents for the specified key. Key cache
1606 * slot(s) must already have been allocated by mwl_key_alloc.
1609 mwl_key_set(struct ieee80211vap *vap, const struct ieee80211_key *k)
1611 return (_mwl_key_set(vap, k, k->wk_macaddr));
1615 _mwl_key_set(struct ieee80211vap *vap, const struct ieee80211_key *k,
1616 const uint8_t mac[IEEE80211_ADDR_LEN])
1618 #define GRPXMIT (IEEE80211_KEY_XMIT | IEEE80211_KEY_GROUP)
1619 /* NB: static wep keys are marked GROUP+tx/rx; GTK will be tx or rx */
1620 #define IEEE80211_IS_STATICKEY(k) \
1621 (((k)->wk_flags & (GRPXMIT|IEEE80211_KEY_RECV)) == \
1622 (GRPXMIT|IEEE80211_KEY_RECV))
1623 struct mwl_softc *sc = vap->iv_ic->ic_softc;
1624 struct mwl_hal_vap *hvap = MWL_VAP(vap)->mv_hvap;
1625 const struct ieee80211_cipher *cip = k->wk_cipher;
1626 const uint8_t *macaddr;
1629 KASSERT((k->wk_flags & IEEE80211_KEY_SWCRYPT) == 0,
1630 ("s/w crypto set?"));
1633 if (vap->iv_opmode != IEEE80211_M_WDS) {
1634 /* XXX monitor mode? */
1635 DPRINTF(sc, MWL_DEBUG_KEYCACHE,
1636 "%s: no hvap for opmode %d\n", __func__,
1640 hvap = MWL_VAP(vap)->mv_ap_hvap;
1642 memset(&hk, 0, sizeof(hk));
1643 hk.keyIndex = k->wk_keyix;
1644 switch (cip->ic_cipher) {
1645 case IEEE80211_CIPHER_WEP:
1646 hk.keyTypeId = KEY_TYPE_ID_WEP;
1647 hk.keyLen = k->wk_keylen;
1648 if (k->wk_keyix == vap->iv_def_txkey)
1649 hk.keyFlags = KEY_FLAG_WEP_TXKEY;
1650 if (!IEEE80211_IS_STATICKEY(k)) {
1651 /* NB: WEP is never used for the PTK */
1652 (void) addgroupflags(&hk, k);
1655 case IEEE80211_CIPHER_TKIP:
1656 hk.keyTypeId = KEY_TYPE_ID_TKIP;
1657 hk.key.tkip.tsc.high = (uint32_t)(k->wk_keytsc >> 16);
1658 hk.key.tkip.tsc.low = (uint16_t)k->wk_keytsc;
1659 hk.keyFlags = KEY_FLAG_TSC_VALID | KEY_FLAG_MICKEY_VALID;
1660 hk.keyLen = k->wk_keylen + IEEE80211_MICBUF_SIZE;
1661 if (!addgroupflags(&hk, k))
1662 hk.keyFlags |= KEY_FLAG_PAIRWISE;
1664 case IEEE80211_CIPHER_AES_CCM:
1665 hk.keyTypeId = KEY_TYPE_ID_AES;
1666 hk.keyLen = k->wk_keylen;
1667 if (!addgroupflags(&hk, k))
1668 hk.keyFlags |= KEY_FLAG_PAIRWISE;
1671 /* XXX should not happen */
1672 DPRINTF(sc, MWL_DEBUG_KEYCACHE, "%s: unknown cipher %d\n",
1673 __func__, k->wk_cipher->ic_cipher);
1677 * NB: tkip mic keys get copied here too; the layout
1678 * just happens to match that in ieee80211_key.
1680 memcpy(hk.key.aes, k->wk_key, hk.keyLen);
1683 * Locate address of sta db entry for writing key;
1684 * the convention unfortunately is somewhat different
1685 * than how net80211, hostapd, and wpa_supplicant think.
1687 if (vap->iv_opmode == IEEE80211_M_STA) {
1689 * NB: keys plumbed before the sta reaches AUTH state
1690 * will be discarded or written to the wrong sta db
1691 * entry because iv_bss is meaningless. This is ok
1692 * (right now) because we handle deferred plumbing of
1693 * WEP keys when the sta reaches AUTH state.
1695 macaddr = vap->iv_bss->ni_bssid;
1696 if ((k->wk_flags & IEEE80211_KEY_GROUP) == 0) {
1697 /* XXX plumb to local sta db too for static key wep */
1698 mwl_hal_keyset(hvap, &hk, vap->iv_myaddr);
1700 } else if (vap->iv_opmode == IEEE80211_M_WDS &&
1701 vap->iv_state != IEEE80211_S_RUN) {
1703 * Prior to RUN state a WDS vap will not it's BSS node
1704 * setup so we will plumb the key to the wrong mac
1705 * address (it'll be our local address). Workaround
1706 * this for the moment by grabbing the correct address.
1708 macaddr = vap->iv_des_bssid;
1709 } else if ((k->wk_flags & GRPXMIT) == GRPXMIT)
1710 macaddr = vap->iv_myaddr;
1713 KEYPRINTF(sc, &hk, macaddr);
1714 return (mwl_hal_keyset(hvap, &hk, macaddr) == 0);
1715 #undef IEEE80211_IS_STATICKEY
1720 * Set the multicast filter contents into the hardware.
1721 * XXX f/w has no support; just defer to the os.
1724 mwl_setmcastfilter(struct mwl_softc *sc)
1727 struct ether_multi *enm;
1728 struct ether_multistep estep;
1729 uint8_t macs[IEEE80211_ADDR_LEN*MWL_HAL_MCAST_MAX];/* XXX stack use */
1735 ETHER_FIRST_MULTI(estep, &sc->sc_ec, enm);
1736 while (enm != NULL) {
1737 /* XXX Punt on ranges. */
1738 if (nmc == MWL_HAL_MCAST_MAX ||
1739 !IEEE80211_ADDR_EQ(enm->enm_addrlo, enm->enm_addrhi)) {
1740 ifp->if_flags |= IFF_ALLMULTI;
1743 IEEE80211_ADDR_COPY(mp, enm->enm_addrlo);
1744 mp += IEEE80211_ADDR_LEN, nmc++;
1745 ETHER_NEXT_MULTI(estep, enm);
1747 ifp->if_flags &= ~IFF_ALLMULTI;
1748 mwl_hal_setmcast(sc->sc_mh, nmc, macs);
1753 mwl_mode_init(struct mwl_softc *sc)
1755 struct ieee80211com *ic = &sc->sc_ic;
1756 struct mwl_hal *mh = sc->sc_mh;
1758 mwl_hal_setpromisc(mh, ic->ic_promisc > 0);
1759 mwl_setmcastfilter(sc);
1765 * Callback from the 802.11 layer after a multicast state change.
1768 mwl_update_mcast(struct ieee80211com *ic)
1770 struct mwl_softc *sc = ic->ic_softc;
1772 mwl_setmcastfilter(sc);
1776 * Callback from the 802.11 layer after a promiscuous mode change.
1777 * Note this interface does not check the operating mode as this
1778 * is an internal callback and we are expected to honor the current
1779 * state (e.g. this is used for setting the interface in promiscuous
1780 * mode when operating in hostap mode to do ACS).
1783 mwl_update_promisc(struct ieee80211com *ic)
1785 struct mwl_softc *sc = ic->ic_softc;
1787 mwl_hal_setpromisc(sc->sc_mh, ic->ic_promisc > 0);
1791 * Callback from the 802.11 layer to update the slot time
1792 * based on the current setting. We use it to notify the
1793 * firmware of ERP changes and the f/w takes care of things
1794 * like slot time and preamble.
1797 mwl_updateslot(struct ieee80211com *ic)
1799 struct mwl_softc *sc = ic->ic_softc;
1800 struct mwl_hal *mh = sc->sc_mh;
1803 /* NB: can be called early; suppress needless cmds */
1804 if (!sc->sc_running)
1808 * Calculate the ERP flags. The firwmare will use
1809 * this to carry out the appropriate measures.
1812 if (IEEE80211_IS_CHAN_ANYG(ic->ic_curchan)) {
1813 if ((ic->ic_flags & IEEE80211_F_SHSLOT) == 0)
1814 prot |= IEEE80211_ERP_NON_ERP_PRESENT;
1815 if (ic->ic_flags & IEEE80211_F_USEPROT)
1816 prot |= IEEE80211_ERP_USE_PROTECTION;
1817 if (ic->ic_flags & IEEE80211_F_USEBARKER)
1818 prot |= IEEE80211_ERP_LONG_PREAMBLE;
1821 DPRINTF(sc, MWL_DEBUG_RESET,
1822 "%s: chan %u MHz/flags 0x%x %s slot, (prot 0x%x ic_flags 0x%x)\n",
1823 __func__, ic->ic_curchan->ic_freq, ic->ic_curchan->ic_flags,
1824 ic->ic_flags & IEEE80211_F_SHSLOT ? "short" : "long", prot,
1827 mwl_hal_setgprot(mh, prot);
1831 * Setup the beacon frame.
1834 mwl_beacon_setup(struct ieee80211vap *vap)
1836 struct mwl_hal_vap *hvap = MWL_VAP(vap)->mv_hvap;
1837 struct ieee80211_node *ni = vap->iv_bss;
1840 m = ieee80211_beacon_alloc(ni);
1843 mwl_hal_setbeacon(hvap, mtod(m, const void *), m->m_len);
1850 * Update the beacon frame in response to a change.
1853 mwl_beacon_update(struct ieee80211vap *vap, int item)
1855 struct mwl_hal_vap *hvap = MWL_VAP(vap)->mv_hvap;
1856 struct ieee80211com *ic = vap->iv_ic;
1858 KASSERT(hvap != NULL, ("no beacon"));
1860 case IEEE80211_BEACON_ERP:
1863 case IEEE80211_BEACON_HTINFO:
1864 mwl_hal_setnprotmode(hvap,
1865 MS(ic->ic_curhtprotmode, IEEE80211_HTINFO_OPMODE));
1867 case IEEE80211_BEACON_CAPS:
1868 case IEEE80211_BEACON_WME:
1869 case IEEE80211_BEACON_APPIE:
1870 case IEEE80211_BEACON_CSA:
1872 case IEEE80211_BEACON_TIM:
1873 /* NB: firmware always forms TIM */
1876 /* XXX retain beacon frame and update */
1877 mwl_beacon_setup(vap);
1881 mwl_load_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error)
1883 bus_addr_t *paddr = (bus_addr_t*) arg;
1884 KASSERT(error == 0, ("error %u on bus_dma callback", error));
1885 *paddr = segs->ds_addr;
1888 #ifdef MWL_HOST_PS_SUPPORT
1890 * Handle power save station occupancy changes.
1893 mwl_update_ps(struct ieee80211vap *vap, int nsta)
1895 struct mwl_vap *mvp = MWL_VAP(vap);
1897 if (nsta == 0 || mvp->mv_last_ps_sta == 0)
1898 mwl_hal_setpowersave_bss(mvp->mv_hvap, nsta);
1899 mvp->mv_last_ps_sta = nsta;
1903 * Handle associated station power save state changes.
1906 mwl_set_tim(struct ieee80211_node *ni, int set)
1908 struct ieee80211vap *vap = ni->ni_vap;
1909 struct mwl_vap *mvp = MWL_VAP(vap);
1911 if (mvp->mv_set_tim(ni, set)) { /* NB: state change */
1912 mwl_hal_setpowersave_sta(mvp->mv_hvap,
1913 IEEE80211_AID(ni->ni_associd), set);
1918 #endif /* MWL_HOST_PS_SUPPORT */
1921 mwl_desc_setup(struct mwl_softc *sc, const char *name,
1922 struct mwl_descdma *dd,
1923 int nbuf, size_t bufsize, int ndesc, size_t descsize)
1928 DPRINTF(sc, MWL_DEBUG_RESET,
1929 "%s: %s DMA: %u bufs (%ju) %u desc/buf (%ju)\n",
1930 __func__, name, nbuf, (uintmax_t) bufsize,
1931 ndesc, (uintmax_t) descsize);
1934 dd->dd_desc_len = nbuf * ndesc * descsize;
1937 * Setup DMA descriptor area.
1939 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), /* parent */
1940 PAGE_SIZE, 0, /* alignment, bounds */
1941 BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
1942 BUS_SPACE_MAXADDR, /* highaddr */
1943 NULL, NULL, /* filter, filterarg */
1944 dd->dd_desc_len, /* maxsize */
1946 dd->dd_desc_len, /* maxsegsize */
1947 BUS_DMA_ALLOCNOW, /* flags */
1948 NULL, /* lockfunc */
1952 device_printf(sc->sc_dev, "cannot allocate %s DMA tag\n", dd->dd_name);
1956 /* allocate descriptors */
1957 error = bus_dmamem_alloc(dd->dd_dmat, (void**) &dd->dd_desc,
1958 BUS_DMA_NOWAIT | BUS_DMA_COHERENT,
1961 device_printf(sc->sc_dev, "unable to alloc memory for %u %s descriptors, "
1962 "error %u\n", nbuf * ndesc, dd->dd_name, error);
1966 error = bus_dmamap_load(dd->dd_dmat, dd->dd_dmamap,
1967 dd->dd_desc, dd->dd_desc_len,
1968 mwl_load_cb, &dd->dd_desc_paddr,
1971 device_printf(sc->sc_dev, "unable to map %s descriptors, error %u\n",
1972 dd->dd_name, error);
1977 memset(ds, 0, dd->dd_desc_len);
1978 DPRINTF(sc, MWL_DEBUG_RESET,
1979 "%s: %s DMA map: %p (%lu) -> 0x%jx (%lu)\n",
1980 __func__, dd->dd_name, ds, (u_long) dd->dd_desc_len,
1981 (uintmax_t) dd->dd_desc_paddr, /*XXX*/ (u_long) dd->dd_desc_len);
1985 bus_dmamem_free(dd->dd_dmat, dd->dd_desc, dd->dd_dmamap);
1987 bus_dma_tag_destroy(dd->dd_dmat);
1988 memset(dd, 0, sizeof(*dd));
1994 mwl_desc_cleanup(struct mwl_softc *sc, struct mwl_descdma *dd)
1996 bus_dmamap_unload(dd->dd_dmat, dd->dd_dmamap);
1997 bus_dmamem_free(dd->dd_dmat, dd->dd_desc, dd->dd_dmamap);
1998 bus_dma_tag_destroy(dd->dd_dmat);
2000 memset(dd, 0, sizeof(*dd));
2004 * Construct a tx q's free list. The order of entries on
2005 * the list must reflect the physical layout of tx descriptors
2006 * because the firmware pre-fetches descriptors.
2008 * XXX might be better to use indices into the buffer array.
2011 mwl_txq_reset(struct mwl_softc *sc, struct mwl_txq *txq)
2013 struct mwl_txbuf *bf;
2016 bf = txq->dma.dd_bufptr;
2017 STAILQ_INIT(&txq->free);
2018 for (i = 0; i < mwl_txbuf; i++, bf++)
2019 STAILQ_INSERT_TAIL(&txq->free, bf, bf_list);
2023 #define DS2PHYS(_dd, _ds) \
2024 ((_dd)->dd_desc_paddr + ((caddr_t)(_ds) - (caddr_t)(_dd)->dd_desc))
2027 mwl_txdma_setup(struct mwl_softc *sc, struct mwl_txq *txq)
2029 int error, bsize, i;
2030 struct mwl_txbuf *bf;
2031 struct mwl_txdesc *ds;
2033 error = mwl_desc_setup(sc, "tx", &txq->dma,
2034 mwl_txbuf, sizeof(struct mwl_txbuf),
2035 MWL_TXDESC, sizeof(struct mwl_txdesc));
2039 /* allocate and setup tx buffers */
2040 bsize = mwl_txbuf * sizeof(struct mwl_txbuf);
2041 bf = malloc(bsize, M_MWLDEV, M_NOWAIT | M_ZERO);
2043 device_printf(sc->sc_dev, "malloc of %u tx buffers failed\n",
2047 txq->dma.dd_bufptr = bf;
2049 ds = txq->dma.dd_desc;
2050 for (i = 0; i < mwl_txbuf; i++, bf++, ds += MWL_TXDESC) {
2052 bf->bf_daddr = DS2PHYS(&txq->dma, ds);
2053 error = bus_dmamap_create(sc->sc_dmat, BUS_DMA_NOWAIT,
2056 device_printf(sc->sc_dev, "unable to create dmamap for tx "
2057 "buffer %u, error %u\n", i, error);
2061 mwl_txq_reset(sc, txq);
2066 mwl_txdma_cleanup(struct mwl_softc *sc, struct mwl_txq *txq)
2068 struct mwl_txbuf *bf;
2071 bf = txq->dma.dd_bufptr;
2072 for (i = 0; i < mwl_txbuf; i++, bf++) {
2073 KASSERT(bf->bf_m == NULL, ("mbuf on free list"));
2074 KASSERT(bf->bf_node == NULL, ("node on free list"));
2075 if (bf->bf_dmamap != NULL)
2076 bus_dmamap_destroy(sc->sc_dmat, bf->bf_dmamap);
2078 STAILQ_INIT(&txq->free);
2080 if (txq->dma.dd_bufptr != NULL) {
2081 free(txq->dma.dd_bufptr, M_MWLDEV);
2082 txq->dma.dd_bufptr = NULL;
2084 if (txq->dma.dd_desc_len != 0)
2085 mwl_desc_cleanup(sc, &txq->dma);
2089 mwl_rxdma_setup(struct mwl_softc *sc)
2091 int error, jumbosize, bsize, i;
2092 struct mwl_rxbuf *bf;
2093 struct mwl_jumbo *rbuf;
2094 struct mwl_rxdesc *ds;
2097 error = mwl_desc_setup(sc, "rx", &sc->sc_rxdma,
2098 mwl_rxdesc, sizeof(struct mwl_rxbuf),
2099 1, sizeof(struct mwl_rxdesc));
2104 * Receive is done to a private pool of jumbo buffers.
2105 * This allows us to attach to mbuf's and avoid re-mapping
2106 * memory on each rx we post. We allocate a large chunk
2107 * of memory and manage it in the driver. The mbuf free
2108 * callback method is used to reclaim frames after sending
2109 * them up the stack. By default we allocate 2x the number of
2110 * rx descriptors configured so we have some slop to hold
2111 * us while frames are processed.
2113 if (mwl_rxbuf < 2*mwl_rxdesc) {
2114 device_printf(sc->sc_dev,
2115 "too few rx dma buffers (%d); increasing to %d\n",
2116 mwl_rxbuf, 2*mwl_rxdesc);
2117 mwl_rxbuf = 2*mwl_rxdesc;
2119 jumbosize = roundup(MWL_AGGR_SIZE, PAGE_SIZE);
2120 sc->sc_rxmemsize = mwl_rxbuf*jumbosize;
2122 error = bus_dma_tag_create(sc->sc_dmat, /* parent */
2123 PAGE_SIZE, 0, /* alignment, bounds */
2124 BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
2125 BUS_SPACE_MAXADDR, /* highaddr */
2126 NULL, NULL, /* filter, filterarg */
2127 sc->sc_rxmemsize, /* maxsize */
2129 sc->sc_rxmemsize, /* maxsegsize */
2130 BUS_DMA_ALLOCNOW, /* flags */
2131 NULL, /* lockfunc */
2135 device_printf(sc->sc_dev, "could not create rx DMA tag\n");
2139 error = bus_dmamem_alloc(sc->sc_rxdmat, (void**) &sc->sc_rxmem,
2140 BUS_DMA_NOWAIT | BUS_DMA_COHERENT,
2143 device_printf(sc->sc_dev, "could not alloc %ju bytes of rx DMA memory\n",
2144 (uintmax_t) sc->sc_rxmemsize);
2148 error = bus_dmamap_load(sc->sc_rxdmat, sc->sc_rxmap,
2149 sc->sc_rxmem, sc->sc_rxmemsize,
2150 mwl_load_cb, &sc->sc_rxmem_paddr,
2153 device_printf(sc->sc_dev, "could not load rx DMA map\n");
2158 * Allocate rx buffers and set them up.
2160 bsize = mwl_rxdesc * sizeof(struct mwl_rxbuf);
2161 bf = malloc(bsize, M_MWLDEV, M_NOWAIT | M_ZERO);
2163 device_printf(sc->sc_dev, "malloc of %u rx buffers failed\n", bsize);
2166 sc->sc_rxdma.dd_bufptr = bf;
2168 STAILQ_INIT(&sc->sc_rxbuf);
2169 ds = sc->sc_rxdma.dd_desc;
2170 for (i = 0; i < mwl_rxdesc; i++, bf++, ds++) {
2172 bf->bf_daddr = DS2PHYS(&sc->sc_rxdma, ds);
2173 /* pre-assign dma buffer */
2174 bf->bf_data = ((uint8_t *)sc->sc_rxmem) + (i*jumbosize);
2175 /* NB: tail is intentional to preserve descriptor order */
2176 STAILQ_INSERT_TAIL(&sc->sc_rxbuf, bf, bf_list);
2180 * Place remainder of dma memory buffers on the free list.
2182 SLIST_INIT(&sc->sc_rxfree);
2183 for (; i < mwl_rxbuf; i++) {
2184 data = ((uint8_t *)sc->sc_rxmem) + (i*jumbosize);
2185 rbuf = MWL_JUMBO_DATA2BUF(data);
2186 SLIST_INSERT_HEAD(&sc->sc_rxfree, rbuf, next);
2194 mwl_rxdma_cleanup(struct mwl_softc *sc)
2196 if (sc->sc_rxmem_paddr != 0) {
2197 bus_dmamap_unload(sc->sc_rxdmat, sc->sc_rxmap);
2198 sc->sc_rxmem_paddr = 0;
2200 if (sc->sc_rxmem != NULL) {
2201 bus_dmamem_free(sc->sc_rxdmat, sc->sc_rxmem, sc->sc_rxmap);
2202 sc->sc_rxmem = NULL;
2204 if (sc->sc_rxdma.dd_bufptr != NULL) {
2205 free(sc->sc_rxdma.dd_bufptr, M_MWLDEV);
2206 sc->sc_rxdma.dd_bufptr = NULL;
2208 if (sc->sc_rxdma.dd_desc_len != 0)
2209 mwl_desc_cleanup(sc, &sc->sc_rxdma);
2213 mwl_dma_setup(struct mwl_softc *sc)
2217 error = mwl_rxdma_setup(sc);
2219 mwl_rxdma_cleanup(sc);
2223 for (i = 0; i < MWL_NUM_TX_QUEUES; i++) {
2224 error = mwl_txdma_setup(sc, &sc->sc_txq[i]);
2226 mwl_dma_cleanup(sc);
2234 mwl_dma_cleanup(struct mwl_softc *sc)
2238 for (i = 0; i < MWL_NUM_TX_QUEUES; i++)
2239 mwl_txdma_cleanup(sc, &sc->sc_txq[i]);
2240 mwl_rxdma_cleanup(sc);
2243 static struct ieee80211_node *
2244 mwl_node_alloc(struct ieee80211vap *vap, const uint8_t mac[IEEE80211_ADDR_LEN])
2246 struct ieee80211com *ic = vap->iv_ic;
2247 struct mwl_softc *sc = ic->ic_softc;
2248 const size_t space = sizeof(struct mwl_node);
2249 struct mwl_node *mn;
2251 mn = malloc(space, M_80211_NODE, M_NOWAIT|M_ZERO);
2256 DPRINTF(sc, MWL_DEBUG_NODE, "%s: mn %p\n", __func__, mn);
2257 return &mn->mn_node;
2261 mwl_node_cleanup(struct ieee80211_node *ni)
2263 struct ieee80211com *ic = ni->ni_ic;
2264 struct mwl_softc *sc = ic->ic_softc;
2265 struct mwl_node *mn = MWL_NODE(ni);
2267 DPRINTF(sc, MWL_DEBUG_NODE, "%s: ni %p ic %p staid %d\n",
2268 __func__, ni, ni->ni_ic, mn->mn_staid);
2270 if (mn->mn_staid != 0) {
2271 struct ieee80211vap *vap = ni->ni_vap;
2273 if (mn->mn_hvap != NULL) {
2274 if (vap->iv_opmode == IEEE80211_M_STA)
2275 mwl_hal_delstation(mn->mn_hvap, vap->iv_myaddr);
2277 mwl_hal_delstation(mn->mn_hvap, ni->ni_macaddr);
2280 * NB: legacy WDS peer sta db entry is installed using
2281 * the associate ap's hvap; use it again to delete it.
2282 * XXX can vap be NULL?
2284 else if (vap->iv_opmode == IEEE80211_M_WDS &&
2285 MWL_VAP(vap)->mv_ap_hvap != NULL)
2286 mwl_hal_delstation(MWL_VAP(vap)->mv_ap_hvap,
2288 delstaid(sc, mn->mn_staid);
2291 sc->sc_node_cleanup(ni);
2295 * Reclaim rx dma buffers from packets sitting on the ampdu
2296 * reorder queue for a station. We replace buffers with a
2297 * system cluster (if available).
2300 mwl_ampdu_rxdma_reclaim(struct ieee80211_rx_ampdu *rap)
2307 n = rap->rxa_qframes;
2308 for (i = 0; i < rap->rxa_wnd && n > 0; i++) {
2313 /* our dma buffers have a well-known free routine */
2314 if ((m->m_flags & M_EXT) == 0 ||
2315 m->m_ext.ext_free != mwl_ext_free)
2318 * Try to allocate a cluster and move the data.
2320 off = m->m_data - m->m_ext.ext_buf;
2321 if (off + m->m_pkthdr.len > MCLBYTES) {
2322 /* XXX no AMSDU for now */
2325 cl = pool_cache_get_paddr(&mclpool_cache, 0,
2326 &m->m_ext.ext_paddr);
2329 * Copy the existing data to the cluster, remove
2330 * the rx dma buffer, and attach the cluster in
2331 * its place. Note we preserve the offset to the
2332 * data so frames being bridged can still prepend
2333 * their headers without adding another mbuf.
2335 memcpy((caddr_t) cl + off, m->m_data, m->m_pkthdr.len);
2337 MEXTADD(m, cl, MCLBYTES, 0, NULL, &mclpool_cache);
2338 /* setup mbuf like _MCLGET does */
2339 m->m_flags |= M_CLUSTER | M_EXT_RW;
2340 _MOWNERREF(m, M_EXT | M_CLUSTER);
2341 /* NB: m_data is clobbered by MEXTADDR, adjust */
2349 * Callback to reclaim resources. We first let the
2350 * net80211 layer do it's thing, then if we are still
2351 * blocked by a lack of rx dma buffers we walk the ampdu
2352 * reorder q's to reclaim buffers by copying to a system
2356 mwl_node_drain(struct ieee80211_node *ni)
2358 struct ieee80211com *ic = ni->ni_ic;
2359 struct mwl_softc *sc = ic->ic_softc;
2360 struct mwl_node *mn = MWL_NODE(ni);
2362 DPRINTF(sc, MWL_DEBUG_NODE, "%s: ni %p vap %p staid %d\n",
2363 __func__, ni, ni->ni_vap, mn->mn_staid);
2365 /* NB: call up first to age out ampdu q's */
2366 sc->sc_node_drain(ni);
2368 /* XXX better to not check low water mark? */
2369 if (sc->sc_rxblocked && mn->mn_staid != 0 &&
2370 (ni->ni_flags & IEEE80211_NODE_HT)) {
2373 * Walk the reorder q and reclaim rx dma buffers by copying
2374 * the packet contents into clusters.
2376 for (tid = 0; tid < WME_NUM_TID; tid++) {
2377 struct ieee80211_rx_ampdu *rap;
2379 rap = &ni->ni_rx_ampdu[tid];
2380 if ((rap->rxa_flags & IEEE80211_AGGR_XCHGPEND) == 0)
2382 if (rap->rxa_qframes)
2383 mwl_ampdu_rxdma_reclaim(rap);
2389 mwl_node_getsignal(const struct ieee80211_node *ni, int8_t *rssi, int8_t *noise)
2391 *rssi = ni->ni_ic->ic_node_getrssi(ni);
2392 #ifdef MWL_ANT_INFO_SUPPORT
2394 /* XXX need to smooth data */
2395 *noise = -MWL_NODE_CONST(ni)->mn_ai.nf;
2397 *noise = -95; /* XXX */
2400 *noise = -95; /* XXX */
2405 * Convert Hardware per-antenna rssi info to common format:
2406 * Let a1, a2, a3 represent the amplitudes per chain
2407 * Let amax represent max[a1, a2, a3]
2408 * Rssi1_dBm = RSSI_dBm + 20*log10(a1/amax)
2409 * Rssi1_dBm = RSSI_dBm + 20*log10(a1) - 20*log10(amax)
2410 * We store a table that is 4*20*log10(idx) - the extra 4 is to store or
2411 * maintain some extra precision.
2413 * Values are stored in .5 db format capped at 127.
2416 mwl_node_getmimoinfo(const struct ieee80211_node *ni,
2417 struct ieee80211_mimo_info *mi)
2419 #define CVT(_dst, _src) do { \
2420 (_dst) = rssi + ((logdbtbl[_src] - logdbtbl[rssi_max]) >> 2); \
2421 (_dst) = (_dst) > 64 ? 127 : ((_dst) << 1); \
2423 static const int8_t logdbtbl[32] = {
2424 0, 0, 24, 38, 48, 56, 62, 68,
2425 72, 76, 80, 83, 86, 89, 92, 94,
2426 96, 98, 100, 102, 104, 106, 107, 109,
2427 110, 112, 113, 115, 116, 117, 118, 119
2429 const struct mwl_node *mn = MWL_NODE_CONST(ni);
2430 uint8_t rssi = mn->mn_ai.rsvd1/2; /* XXX */
2433 rssi_max = mn->mn_ai.rssi_a;
2434 if (mn->mn_ai.rssi_b > rssi_max)
2435 rssi_max = mn->mn_ai.rssi_b;
2436 if (mn->mn_ai.rssi_c > rssi_max)
2437 rssi_max = mn->mn_ai.rssi_c;
2439 CVT(mi->ch[0].rssi[0], mn->mn_ai.rssi_a);
2440 CVT(mi->ch[1].rssi[0], mn->mn_ai.rssi_b);
2441 CVT(mi->ch[2].rssi[0], mn->mn_ai.rssi_c);
2443 mi->ch[0].noise[0] = mn->mn_ai.nf_a;
2444 mi->ch[1].noise[0] = mn->mn_ai.nf_b;
2445 mi->ch[2].noise[0] = mn->mn_ai.nf_c;
2449 static __inline void *
2450 mwl_getrxdma(struct mwl_softc *sc)
2452 struct mwl_jumbo *buf;
2456 * Allocate from jumbo pool.
2458 MWL_RXFREE_LOCK(sc);
2459 buf = SLIST_FIRST(&sc->sc_rxfree);
2461 DPRINTF(sc, MWL_DEBUG_ANY,
2462 "%s: out of rx dma buffers\n", __func__);
2463 sc->sc_stats.mst_rx_nodmabuf++;
2466 SLIST_REMOVE_HEAD(&sc->sc_rxfree, next);
2468 data = MWL_JUMBO_BUF2DATA(buf);
2470 MWL_RXFREE_UNLOCK(sc);
2474 static __inline void
2475 mwl_putrxdma(struct mwl_softc *sc, void *data)
2477 struct mwl_jumbo *buf;
2479 /* XXX bounds check data */
2480 MWL_RXFREE_LOCK(sc);
2481 buf = MWL_JUMBO_DATA2BUF(data);
2482 SLIST_INSERT_HEAD(&sc->sc_rxfree, buf, next);
2484 MWL_RXFREE_UNLOCK(sc);
2488 mwl_rxbuf_init(struct mwl_softc *sc, struct mwl_rxbuf *bf)
2490 struct mwl_rxdesc *ds;
2493 if (bf->bf_data == NULL) {
2494 bf->bf_data = mwl_getrxdma(sc);
2495 if (bf->bf_data == NULL) {
2496 /* mark descriptor to be skipped */
2497 ds->RxControl = EAGLE_RXD_CTRL_OS_OWN;
2498 /* NB: don't need PREREAD */
2499 MWL_RXDESC_SYNC(sc, ds, BUS_DMASYNC_PREWRITE);
2500 sc->sc_stats.mst_rxbuf_failed++;
2505 * NB: DMA buffer contents is known to be unmodified
2506 * so there's no need to flush the data cache.
2514 ds->Status = EAGLE_RXD_STATUS_IDLE;
2516 ds->PktLen = htole16(MWL_AGGR_SIZE);
2518 ds->pPhysBuffData = htole32(MWL_JUMBO_DMA_ADDR(sc, bf->bf_data));
2519 /* NB: don't touch pPhysNext, set once */
2520 ds->RxControl = EAGLE_RXD_CTRL_DRIVER_OWN;
2521 MWL_RXDESC_SYNC(sc, ds, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
2527 mwl_ext_free(struct mbuf *m)
2529 struct mwl_softc *sc = m->m_ext.ext_arg1;
2531 /* XXX bounds check data */
2532 mwl_putrxdma(sc, m->m_ext.ext_buf);
2534 * If we were previously blocked by a lack of rx dma buffers
2535 * check if we now have enough to restart rx interrupt handling.
2536 * NB: we know we are called at splvm which is above splnet.
2538 if (sc->sc_rxblocked && sc->sc_nrxfree > mwl_rxdmalow) {
2539 sc->sc_rxblocked = 0;
2540 mwl_hal_intrset(sc->sc_mh, sc->sc_imask);
2544 struct mwl_frame_bar {
2547 u_int8_t i_ra[IEEE80211_ADDR_LEN];
2548 u_int8_t i_ta[IEEE80211_ADDR_LEN];
2553 * Like ieee80211_anyhdrsize, but handles BAR frames
2554 * specially so the logic below to piece the 802.11
2555 * header together works.
2558 mwl_anyhdrsize(const void *data)
2560 const struct ieee80211_frame *wh = data;
2562 if ((wh->i_fc[0]&IEEE80211_FC0_TYPE_MASK) == IEEE80211_FC0_TYPE_CTL) {
2563 switch (wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) {
2564 case IEEE80211_FC0_SUBTYPE_CTS:
2565 case IEEE80211_FC0_SUBTYPE_ACK:
2566 return sizeof(struct ieee80211_frame_ack);
2567 case IEEE80211_FC0_SUBTYPE_BAR:
2568 return sizeof(struct mwl_frame_bar);
2570 return sizeof(struct ieee80211_frame_min);
2572 return ieee80211_hdrsize(data);
2576 mwl_handlemicerror(struct ieee80211com *ic, const uint8_t *data)
2578 const struct ieee80211_frame *wh;
2579 struct ieee80211_node *ni;
2581 wh = (const struct ieee80211_frame *)(data + sizeof(uint16_t));
2582 ni = ieee80211_find_rxnode(ic, (const struct ieee80211_frame_min *) wh);
2584 ieee80211_notify_michael_failure(ni->ni_vap, wh, 0);
2585 ieee80211_free_node(ni);
2590 * Convert hardware signal strength to rssi. The value
2591 * provided by the device has the noise floor added in;
2592 * we need to compensate for this but we don't have that
2593 * so we use a fixed value.
2595 * The offset of 8 is good for both 2.4 and 5GHz. The LNA
2596 * offset is already set as part of the initial gain. This
2597 * will give at least +/- 3dB for 2.4GHz and +/- 5dB for 5GHz.
2600 cvtrssi(uint8_t ssi)
2602 int rssi = (int) ssi + 8;
2603 /* XXX hack guess until we have a real noise floor */
2604 rssi = 2*(87 - rssi); /* NB: .5 dBm units */
2605 return (rssi < 0 ? 0 : rssi > 127 ? 127 : rssi);
2609 mwl_rx_proc(void *arg, int npending)
2611 struct mwl_softc *sc = arg;
2612 struct ieee80211com *ic = &sc->sc_ic;
2613 struct mwl_rxbuf *bf;
2614 struct mwl_rxdesc *ds;
2616 struct ieee80211_qosframe *wh;
2617 struct ieee80211_qosframe_addr4 *wh4;
2618 struct ieee80211_node *ni;
2619 struct mwl_node *mn;
2620 int off, len, hdrlen, pktlen, rssi, ntodo;
2621 uint8_t *data, status;
2625 DPRINTF(sc, MWL_DEBUG_RX_PROC, "%s: pending %u rdptr 0x%x wrptr 0x%x\n",
2626 __func__, npending, RD4(sc, sc->sc_hwspecs.rxDescRead),
2627 RD4(sc, sc->sc_hwspecs.rxDescWrite));
2630 for (ntodo = mwl_rxquota; ntodo > 0; ntodo--) {
2632 bf = STAILQ_FIRST(&sc->sc_rxbuf);
2637 * If data allocation failed previously there
2638 * will be no buffer; try again to re-populate it.
2639 * Note the firmware will not advance to the next
2640 * descriptor with a dma buffer so we must mimic
2641 * this or we'll get out of sync.
2643 DPRINTF(sc, MWL_DEBUG_ANY,
2644 "%s: rx buf w/o dma memory\n", __func__);
2645 (void) mwl_rxbuf_init(sc, bf);
2646 sc->sc_stats.mst_rx_dmabufmissing++;
2649 MWL_RXDESC_SYNC(sc, ds,
2650 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
2651 if (ds->RxControl != EAGLE_RXD_CTRL_DMA_OWN)
2654 if (sc->sc_debug & MWL_DEBUG_RECV_DESC)
2655 mwl_printrxbuf(bf, 0);
2657 status = ds->Status;
2658 if (status & EAGLE_RXD_STATUS_DECRYPT_ERR_MASK) {
2659 counter_u64_add(ic->ic_ierrors, 1);
2660 sc->sc_stats.mst_rx_crypto++;
2662 * NB: Check EAGLE_RXD_STATUS_GENERAL_DECRYPT_ERR
2663 * for backwards compatibility.
2665 if (status != EAGLE_RXD_STATUS_GENERAL_DECRYPT_ERR &&
2666 (status & EAGLE_RXD_STATUS_TKIP_MIC_DECRYPT_ERR)) {
2668 * MIC error, notify upper layers.
2670 bus_dmamap_sync(sc->sc_rxdmat, sc->sc_rxmap,
2671 BUS_DMASYNC_POSTREAD);
2672 mwl_handlemicerror(ic, data);
2673 sc->sc_stats.mst_rx_tkipmic++;
2675 /* XXX too painful to tap packets */
2679 * Sync the data buffer.
2681 len = le16toh(ds->PktLen);
2682 bus_dmamap_sync(sc->sc_rxdmat, sc->sc_rxmap, BUS_DMASYNC_POSTREAD);
2684 * The 802.11 header is provided all or in part at the front;
2685 * use it to calculate the true size of the header that we'll
2686 * construct below. We use this to figure out where to copy
2687 * payload prior to constructing the header.
2689 hdrlen = mwl_anyhdrsize(data + sizeof(uint16_t));
2690 off = sizeof(uint16_t) + sizeof(struct ieee80211_frame_addr4);
2692 /* calculate rssi early so we can re-use for each aggregate */
2693 rssi = cvtrssi(ds->RSSI);
2695 pktlen = hdrlen + (len - off);
2697 * NB: we know our frame is at least as large as
2698 * IEEE80211_MIN_LEN because there is a 4-address
2699 * frame at the front. Hence there's no need to
2700 * vet the packet length. If the frame in fact
2701 * is too small it should be discarded at the
2706 * Attach dma buffer to an mbuf. We tried
2707 * doing this based on the packet size (i.e.
2708 * copying small packets) but it turns out to
2709 * be a net loss. The tradeoff might be system
2710 * dependent (cache architecture is important).
2712 MGETHDR(m, M_NOWAIT, MT_DATA);
2714 DPRINTF(sc, MWL_DEBUG_ANY,
2715 "%s: no rx mbuf\n", __func__);
2716 sc->sc_stats.mst_rx_nombuf++;
2720 * Acquire the replacement dma buffer before
2721 * processing the frame. If we're out of dma
2722 * buffers we disable rx interrupts and wait
2723 * for the free pool to reach mlw_rxdmalow buffers
2724 * before starting to do work again. If the firmware
2725 * runs out of descriptors then it will toss frames
2726 * which is better than our doing it as that can
2727 * starve our processing. It is also important that
2728 * we always process rx'd frames in case they are
2729 * A-MPDU as otherwise the host's view of the BA
2730 * window may get out of sync with the firmware.
2732 newdata = mwl_getrxdma(sc);
2733 if (newdata == NULL) {
2734 /* NB: stat+msg in mwl_getrxdma */
2736 /* disable RX interrupt and mark state */
2737 mwl_hal_intrset(sc->sc_mh,
2738 sc->sc_imask &~ MACREG_A2HRIC_BIT_RX_RDY);
2739 sc->sc_rxblocked = 1;
2740 ieee80211_drain(ic);
2741 /* XXX check rxblocked and immediately start again? */
2744 bf->bf_data = newdata;
2746 * Attach the dma buffer to the mbuf;
2747 * mwl_rxbuf_init will re-setup the rx
2748 * descriptor using the replacement dma
2749 * buffer we just installed above.
2751 m_extadd(m, data, MWL_AGGR_SIZE, mwl_ext_free, sc, NULL, 0,
2753 m->m_data += off - hdrlen;
2754 m->m_pkthdr.len = m->m_len = pktlen;
2755 /* NB: dma buffer assumed read-only */
2758 * Piece 802.11 header together.
2760 wh = mtod(m, struct ieee80211_qosframe *);
2761 /* NB: don't need to do this sometimes but ... */
2762 /* XXX special case so we can memcpy after m_devget? */
2763 ovbcopy(data + sizeof(uint16_t), wh, hdrlen);
2764 if (IEEE80211_QOS_HAS_SEQ(wh)) {
2765 if (IEEE80211_IS_DSTODS(wh)) {
2767 struct ieee80211_qosframe_addr4*);
2768 *(uint16_t *)wh4->i_qos = ds->QosCtrl;
2770 *(uint16_t *)wh->i_qos = ds->QosCtrl;
2774 * The f/w strips WEP header but doesn't clear
2775 * the WEP bit; mark the packet with M_WEP so
2776 * net80211 will treat the data as decrypted.
2777 * While here also clear the PWR_MGT bit since
2778 * power save is handled by the firmware and
2779 * passing this up will potentially cause the
2780 * upper layer to put a station in power save
2781 * (except when configured with MWL_HOST_PS_SUPPORT).
2783 if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED)
2784 m->m_flags |= M_WEP;
2785 #ifdef MWL_HOST_PS_SUPPORT
2786 wh->i_fc[1] &= ~IEEE80211_FC1_PROTECTED;
2788 wh->i_fc[1] &= ~(IEEE80211_FC1_PROTECTED |
2789 IEEE80211_FC1_PWR_MGT);
2792 if (ieee80211_radiotap_active(ic)) {
2793 struct mwl_rx_radiotap_header *tap = &sc->sc_rx_th;
2796 tap->wr_rate = ds->Rate;
2797 tap->wr_antsignal = rssi + nf;
2798 tap->wr_antnoise = nf;
2800 if (IFF_DUMPPKTS_RECV(sc, wh)) {
2801 ieee80211_dump_pkt(ic, mtod(m, caddr_t),
2802 len, ds->Rate, rssi);
2805 ni = ieee80211_find_rxnode(ic,
2806 (const struct ieee80211_frame_min *) wh);
2809 #ifdef MWL_ANT_INFO_SUPPORT
2810 mn->mn_ai.rssi_a = ds->ai.rssi_a;
2811 mn->mn_ai.rssi_b = ds->ai.rssi_b;
2812 mn->mn_ai.rssi_c = ds->ai.rssi_c;
2813 mn->mn_ai.rsvd1 = rssi;
2815 /* tag AMPDU aggregates for reorder processing */
2816 if (ni->ni_flags & IEEE80211_NODE_HT)
2817 m->m_flags |= M_AMPDU;
2818 (void) ieee80211_input(ni, m, rssi, nf);
2819 ieee80211_free_node(ni);
2821 (void) ieee80211_input_all(ic, m, rssi, nf);
2823 /* NB: ignore ENOMEM so we process more descriptors */
2824 (void) mwl_rxbuf_init(sc, bf);
2825 bf = STAILQ_NEXT(bf, bf_list);
2830 if (mbufq_first(&sc->sc_snd) != NULL) {
2831 /* NB: kick fw; the tx thread may have been preempted */
2832 mwl_hal_txstart(sc->sc_mh, 0);
2838 mwl_txq_init(struct mwl_softc *sc, struct mwl_txq *txq, int qnum)
2840 struct mwl_txbuf *bf, *bn;
2841 struct mwl_txdesc *ds;
2843 MWL_TXQ_LOCK_INIT(sc, txq);
2845 txq->txpri = 0; /* XXX */
2847 /* NB: q setup by mwl_txdma_setup XXX */
2848 STAILQ_INIT(&txq->free);
2850 STAILQ_FOREACH(bf, &txq->free, bf_list) {
2854 bn = STAILQ_NEXT(bf, bf_list);
2856 bn = STAILQ_FIRST(&txq->free);
2857 ds->pPhysNext = htole32(bn->bf_daddr);
2859 STAILQ_INIT(&txq->active);
2863 * Setup a hardware data transmit queue for the specified
2864 * access control. We record the mapping from ac's
2865 * to h/w queues for use by mwl_tx_start.
2868 mwl_tx_setup(struct mwl_softc *sc, int ac, int mvtype)
2870 struct mwl_txq *txq;
2872 if (ac >= nitems(sc->sc_ac2q)) {
2873 device_printf(sc->sc_dev, "AC %u out of range, max %zu!\n",
2874 ac, nitems(sc->sc_ac2q));
2877 if (mvtype >= MWL_NUM_TX_QUEUES) {
2878 device_printf(sc->sc_dev, "mvtype %u out of range, max %u!\n",
2879 mvtype, MWL_NUM_TX_QUEUES);
2882 txq = &sc->sc_txq[mvtype];
2883 mwl_txq_init(sc, txq, mvtype);
2884 sc->sc_ac2q[ac] = txq;
2889 * Update WME parameters for a transmit queue.
2892 mwl_txq_update(struct mwl_softc *sc, int ac)
2894 #define MWL_EXPONENT_TO_VALUE(v) ((1<<v)-1)
2895 struct ieee80211com *ic = &sc->sc_ic;
2896 struct mwl_txq *txq = sc->sc_ac2q[ac];
2897 struct wmeParams *wmep = &ic->ic_wme.wme_chanParams.cap_wmeParams[ac];
2898 struct mwl_hal *mh = sc->sc_mh;
2899 int aifs, cwmin, cwmax, txoplim;
2901 aifs = wmep->wmep_aifsn;
2902 /* XXX in sta mode need to pass log values for cwmin/max */
2903 cwmin = MWL_EXPONENT_TO_VALUE(wmep->wmep_logcwmin);
2904 cwmax = MWL_EXPONENT_TO_VALUE(wmep->wmep_logcwmax);
2905 txoplim = wmep->wmep_txopLimit; /* NB: units of 32us */
2907 if (mwl_hal_setedcaparams(mh, txq->qnum, cwmin, cwmax, aifs, txoplim)) {
2908 device_printf(sc->sc_dev, "unable to update hardware queue "
2909 "parameters for %s traffic!\n",
2910 ieee80211_wme_acnames[ac]);
2914 #undef MWL_EXPONENT_TO_VALUE
2918 * Callback from the 802.11 layer to update WME parameters.
2921 mwl_wme_update(struct ieee80211com *ic)
2923 struct mwl_softc *sc = ic->ic_softc;
2925 return !mwl_txq_update(sc, WME_AC_BE) ||
2926 !mwl_txq_update(sc, WME_AC_BK) ||
2927 !mwl_txq_update(sc, WME_AC_VI) ||
2928 !mwl_txq_update(sc, WME_AC_VO) ? EIO : 0;
2932 * Reclaim resources for a setup queue.
2935 mwl_tx_cleanupq(struct mwl_softc *sc, struct mwl_txq *txq)
2938 MWL_TXQ_LOCK_DESTROY(txq);
2942 * Reclaim all tx queue resources.
2945 mwl_tx_cleanup(struct mwl_softc *sc)
2949 for (i = 0; i < MWL_NUM_TX_QUEUES; i++)
2950 mwl_tx_cleanupq(sc, &sc->sc_txq[i]);
2954 mwl_tx_dmasetup(struct mwl_softc *sc, struct mwl_txbuf *bf, struct mbuf *m0)
2960 * Load the DMA map so any coalescing is done. This
2961 * also calculates the number of descriptors we need.
2963 error = bus_dmamap_load_mbuf_sg(sc->sc_dmat, bf->bf_dmamap, m0,
2964 bf->bf_segs, &bf->bf_nseg,
2966 if (error == EFBIG) {
2967 /* XXX packet requires too many descriptors */
2968 bf->bf_nseg = MWL_TXDESC+1;
2969 } else if (error != 0) {
2970 sc->sc_stats.mst_tx_busdma++;
2975 * Discard null packets and check for packets that
2976 * require too many TX descriptors. We try to convert
2977 * the latter to a cluster.
2979 if (error == EFBIG) { /* too many desc's, linearize */
2980 sc->sc_stats.mst_tx_linear++;
2982 m = m_collapse(m0, M_NOWAIT, MWL_TXDESC);
2984 m = m_defrag(m0, M_NOWAIT);
2988 sc->sc_stats.mst_tx_nombuf++;
2992 error = bus_dmamap_load_mbuf_sg(sc->sc_dmat, bf->bf_dmamap, m0,
2993 bf->bf_segs, &bf->bf_nseg,
2996 sc->sc_stats.mst_tx_busdma++;
3000 KASSERT(bf->bf_nseg <= MWL_TXDESC,
3001 ("too many segments after defrag; nseg %u", bf->bf_nseg));
3002 } else if (bf->bf_nseg == 0) { /* null packet, discard */
3003 sc->sc_stats.mst_tx_nodata++;
3007 DPRINTF(sc, MWL_DEBUG_XMIT, "%s: m %p len %u\n",
3008 __func__, m0, m0->m_pkthdr.len);
3009 bus_dmamap_sync(sc->sc_dmat, bf->bf_dmamap, BUS_DMASYNC_PREWRITE);
3016 mwl_cvtlegacyrate(int rate)
3037 * Calculate fixed tx rate information per client state;
3038 * this value is suitable for writing to the Format field
3039 * of a tx descriptor.
3042 mwl_calcformat(uint8_t rate, const struct ieee80211_node *ni)
3046 fmt = SM(3, EAGLE_TXD_ANTENNA)
3047 | (IEEE80211_IS_CHAN_HT40D(ni->ni_chan) ?
3048 EAGLE_TXD_EXTCHAN_LO : EAGLE_TXD_EXTCHAN_HI);
3049 if (rate & IEEE80211_RATE_MCS) { /* HT MCS */
3050 fmt |= EAGLE_TXD_FORMAT_HT
3051 /* NB: 0x80 implicitly stripped from ucastrate */
3052 | SM(rate, EAGLE_TXD_RATE);
3053 /* XXX short/long GI may be wrong; re-check */
3054 if (IEEE80211_IS_CHAN_HT40(ni->ni_chan)) {
3055 fmt |= EAGLE_TXD_CHW_40
3056 | (ni->ni_htcap & IEEE80211_HTCAP_SHORTGI40 ?
3057 EAGLE_TXD_GI_SHORT : EAGLE_TXD_GI_LONG);
3059 fmt |= EAGLE_TXD_CHW_20
3060 | (ni->ni_htcap & IEEE80211_HTCAP_SHORTGI20 ?
3061 EAGLE_TXD_GI_SHORT : EAGLE_TXD_GI_LONG);
3063 } else { /* legacy rate */
3064 fmt |= EAGLE_TXD_FORMAT_LEGACY
3065 | SM(mwl_cvtlegacyrate(rate), EAGLE_TXD_RATE)
3067 /* XXX iv_flags & IEEE80211_F_SHPREAMBLE? */
3068 | (ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_PREAMBLE ?
3069 EAGLE_TXD_PREAMBLE_SHORT : EAGLE_TXD_PREAMBLE_LONG);
3075 mwl_tx_start(struct mwl_softc *sc, struct ieee80211_node *ni, struct mwl_txbuf *bf,
3078 struct ieee80211com *ic = &sc->sc_ic;
3079 struct ieee80211vap *vap = ni->ni_vap;
3080 int error, iswep, ismcast;
3081 int hdrlen, copyhdrlen, pktlen;
3082 struct mwl_txdesc *ds;
3083 struct mwl_txq *txq;
3084 struct ieee80211_frame *wh;
3085 struct mwltxrec *tr;
3086 struct mwl_node *mn;
3092 wh = mtod(m0, struct ieee80211_frame *);
3093 iswep = wh->i_fc[1] & IEEE80211_FC1_PROTECTED;
3094 ismcast = IEEE80211_IS_MULTICAST(wh->i_addr1);
3095 hdrlen = ieee80211_anyhdrsize(wh);
3096 copyhdrlen = hdrlen;
3097 pktlen = m0->m_pkthdr.len;
3098 if (IEEE80211_QOS_HAS_SEQ(wh)) {
3099 if (IEEE80211_IS_DSTODS(wh)) {
3101 (((struct ieee80211_qosframe_addr4 *) wh)->i_qos);
3102 copyhdrlen -= sizeof(qos);
3105 (((struct ieee80211_qosframe *) wh)->i_qos);
3110 const struct ieee80211_cipher *cip;
3111 struct ieee80211_key *k;
3114 * Construct the 802.11 header+trailer for an encrypted
3115 * frame. The only reason this can fail is because of an
3116 * unknown or unsupported cipher/key type.
3118 * NB: we do this even though the firmware will ignore
3119 * what we've done for WEP and TKIP as we need the
3120 * ExtIV filled in for CCMP and this also adjusts
3121 * the headers which simplifies our work below.
3123 k = ieee80211_crypto_encap(ni, m0);
3126 * This can happen when the key is yanked after the
3127 * frame was queued. Just discard the frame; the
3128 * 802.11 layer counts failures and provides
3129 * debugging/diagnostics.
3135 * Adjust the packet length for the crypto additions
3136 * done during encap and any other bits that the f/w
3137 * will add later on.
3140 pktlen += cip->ic_header + cip->ic_miclen + cip->ic_trailer;
3142 /* packet header may have moved, reset our local pointer */
3143 wh = mtod(m0, struct ieee80211_frame *);
3146 if (ieee80211_radiotap_active_vap(vap)) {
3147 sc->sc_tx_th.wt_flags = 0; /* XXX */
3149 sc->sc_tx_th.wt_flags |= IEEE80211_RADIOTAP_F_WEP;
3151 sc->sc_tx_th.wt_rate = ds->DataRate;
3153 sc->sc_tx_th.wt_txpower = ni->ni_txpower;
3154 sc->sc_tx_th.wt_antenna = sc->sc_txantenna;
3156 ieee80211_radiotap_tx(vap, m0);
3159 * Copy up/down the 802.11 header; the firmware requires
3160 * we present a 2-byte payload length followed by a
3161 * 4-address header (w/o QoS), followed (optionally) by
3162 * any WEP/ExtIV header (but only filled in for CCMP).
3163 * We are assured the mbuf has sufficient headroom to
3164 * prepend in-place by the setup of ic_headroom in
3167 if (hdrlen < sizeof(struct mwltxrec)) {
3168 const int space = sizeof(struct mwltxrec) - hdrlen;
3169 if (M_LEADINGSPACE(m0) < space) {
3170 /* NB: should never happen */
3171 device_printf(sc->sc_dev,
3172 "not enough headroom, need %d found %zd, "
3173 "m_flags 0x%x m_len %d\n",
3174 space, M_LEADINGSPACE(m0), m0->m_flags, m0->m_len);
3175 ieee80211_dump_pkt(ic,
3176 mtod(m0, const uint8_t *), m0->m_len, 0, -1);
3178 sc->sc_stats.mst_tx_noheadroom++;
3181 M_PREPEND(m0, space, M_NOWAIT);
3183 tr = mtod(m0, struct mwltxrec *);
3184 if (wh != (struct ieee80211_frame *) &tr->wh)
3185 ovbcopy(wh, &tr->wh, hdrlen);
3187 * Note: the "firmware length" is actually the length
3188 * of the fully formed "802.11 payload". That is, it's
3189 * everything except for the 802.11 header. In particular
3190 * this includes all crypto material including the MIC!
3192 tr->fwlen = htole16(pktlen - hdrlen);
3195 * Load the DMA map so any coalescing is done. This
3196 * also calculates the number of descriptors we need.
3198 error = mwl_tx_dmasetup(sc, bf, m0);
3200 /* NB: stat collected in mwl_tx_dmasetup */
3201 DPRINTF(sc, MWL_DEBUG_XMIT,
3202 "%s: unable to setup dma\n", __func__);
3205 bf->bf_node = ni; /* NB: held reference */
3206 m0 = bf->bf_m; /* NB: may have changed */
3207 tr = mtod(m0, struct mwltxrec *);
3208 wh = (struct ieee80211_frame *)&tr->wh;
3211 * Formulate tx descriptor.
3216 ds->QosCtrl = qos; /* NB: already little-endian */
3219 * NB: multiframes should be zero because the descriptors
3220 * are initialized to zero. This should handle the case
3221 * where the driver is built with MWL_TXDESC=1 but we are
3222 * using firmware with multi-segment support.
3224 ds->PktPtr = htole32(bf->bf_segs[0].ds_addr);
3225 ds->PktLen = htole16(bf->bf_segs[0].ds_len);
3227 ds->multiframes = htole32(bf->bf_nseg);
3228 ds->PktLen = htole16(m0->m_pkthdr.len);
3229 for (i = 0; i < bf->bf_nseg; i++) {
3230 ds->PktPtrArray[i] = htole32(bf->bf_segs[i].ds_addr);
3231 ds->PktLenArray[i] = htole16(bf->bf_segs[i].ds_len);
3234 /* NB: pPhysNext, DataRate, and SapPktInfo setup once, don't touch */
3237 ds->ack_wcb_addr = 0;
3241 * Select transmit rate.
3243 switch (wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) {
3244 case IEEE80211_FC0_TYPE_MGT:
3245 sc->sc_stats.mst_tx_mgmt++;
3247 case IEEE80211_FC0_TYPE_CTL:
3248 /* NB: assign to BE q to avoid bursting */
3249 ds->TxPriority = MWL_WME_AC_BE;
3251 case IEEE80211_FC0_TYPE_DATA:
3253 const struct ieee80211_txparam *tp = ni->ni_txparms;
3255 * EAPOL frames get forced to a fixed rate and w/o
3256 * aggregation; otherwise check for any fixed rate
3257 * for the client (may depend on association state).
3259 if (m0->m_flags & M_EAPOL) {
3260 const struct mwl_vap *mvp = MWL_VAP_CONST(vap);
3261 ds->Format = mvp->mv_eapolformat;
3263 EAGLE_TXD_FIXED_RATE | EAGLE_TXD_DONT_AGGR);
3264 } else if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) {
3265 /* XXX pre-calculate per node */
3266 ds->Format = htole16(
3267 mwl_calcformat(tp->ucastrate, ni));
3268 ds->pad = htole16(EAGLE_TXD_FIXED_RATE);
3270 /* NB: EAPOL frames will never have qos set */
3272 ds->TxPriority = txq->qnum;
3274 else if (mwl_bastream_match(&mn->mn_ba[3], qos))
3275 ds->TxPriority = mn->mn_ba[3].txq;
3278 else if (mwl_bastream_match(&mn->mn_ba[2], qos))
3279 ds->TxPriority = mn->mn_ba[2].txq;
3282 else if (mwl_bastream_match(&mn->mn_ba[1], qos))
3283 ds->TxPriority = mn->mn_ba[1].txq;
3286 else if (mwl_bastream_match(&mn->mn_ba[0], qos))
3287 ds->TxPriority = mn->mn_ba[0].txq;
3290 ds->TxPriority = txq->qnum;
3292 ds->TxPriority = txq->qnum;
3295 device_printf(sc->sc_dev, "bogus frame type 0x%x (%s)\n",
3296 wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK, __func__);
3297 sc->sc_stats.mst_tx_badframetype++;
3302 if (IFF_DUMPPKTS_XMIT(sc))
3303 ieee80211_dump_pkt(ic,
3304 mtod(m0, const uint8_t *)+sizeof(uint16_t),
3305 m0->m_len - sizeof(uint16_t), ds->DataRate, -1);
3308 ds->Status = htole32(EAGLE_TXD_STATUS_FW_OWNED);
3309 STAILQ_INSERT_TAIL(&txq->active, bf, bf_list);
3310 MWL_TXDESC_SYNC(txq, ds, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
3312 sc->sc_tx_timer = 5;
3313 MWL_TXQ_UNLOCK(txq);
3319 mwl_cvtlegacyrix(int rix)
3321 static const int ieeerates[] =
3322 { 2, 4, 11, 22, 44, 12, 18, 24, 36, 48, 72, 96, 108 };
3323 return (rix < nitems(ieeerates) ? ieeerates[rix] : 0);
3327 * Process completed xmit descriptors from the specified queue.
3330 mwl_tx_processq(struct mwl_softc *sc, struct mwl_txq *txq)
3332 #define EAGLE_TXD_STATUS_MCAST \
3333 (EAGLE_TXD_STATUS_MULTICAST_TX | EAGLE_TXD_STATUS_BROADCAST_TX)
3334 struct ieee80211com *ic = &sc->sc_ic;
3335 struct mwl_txbuf *bf;
3336 struct mwl_txdesc *ds;
3337 struct ieee80211_node *ni;
3338 struct mwl_node *an;
3342 DPRINTF(sc, MWL_DEBUG_TX_PROC, "%s: tx queue %u\n", __func__, txq->qnum);
3343 for (nreaped = 0;; nreaped++) {
3345 bf = STAILQ_FIRST(&txq->active);
3347 MWL_TXQ_UNLOCK(txq);
3351 MWL_TXDESC_SYNC(txq, ds,
3352 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
3353 if (ds->Status & htole32(EAGLE_TXD_STATUS_FW_OWNED)) {
3354 MWL_TXQ_UNLOCK(txq);
3357 STAILQ_REMOVE_HEAD(&txq->active, bf_list);
3358 MWL_TXQ_UNLOCK(txq);
3361 if (sc->sc_debug & MWL_DEBUG_XMIT_DESC)
3362 mwl_printtxbuf(bf, txq->qnum, nreaped);
3367 status = le32toh(ds->Status);
3368 if (status & EAGLE_TXD_STATUS_OK) {
3369 uint16_t Format = le16toh(ds->Format);
3370 uint8_t txant = MS(Format, EAGLE_TXD_ANTENNA);
3372 sc->sc_stats.mst_ant_tx[txant]++;
3373 if (status & EAGLE_TXD_STATUS_OK_RETRY)
3374 sc->sc_stats.mst_tx_retries++;
3375 if (status & EAGLE_TXD_STATUS_OK_MORE_RETRY)
3376 sc->sc_stats.mst_tx_mretries++;
3377 if (txq->qnum >= MWL_WME_AC_VO)
3378 ic->ic_wme.wme_hipri_traffic++;
3379 ni->ni_txrate = MS(Format, EAGLE_TXD_RATE);
3380 if ((Format & EAGLE_TXD_FORMAT_HT) == 0) {
3381 ni->ni_txrate = mwl_cvtlegacyrix(
3384 ni->ni_txrate |= IEEE80211_RATE_MCS;
3385 sc->sc_stats.mst_tx_rate = ni->ni_txrate;
3387 if (status & EAGLE_TXD_STATUS_FAILED_LINK_ERROR)
3388 sc->sc_stats.mst_tx_linkerror++;
3389 if (status & EAGLE_TXD_STATUS_FAILED_XRETRY)
3390 sc->sc_stats.mst_tx_xretries++;
3391 if (status & EAGLE_TXD_STATUS_FAILED_AGING)
3392 sc->sc_stats.mst_tx_aging++;
3393 if (bf->bf_m->m_flags & M_FF)
3394 sc->sc_stats.mst_ff_txerr++;
3396 if (bf->bf_m->m_flags & M_TXCB)
3397 /* XXX strip fw len in case header inspected */
3398 m_adj(bf->bf_m, sizeof(uint16_t));
3399 ieee80211_tx_complete(ni, bf->bf_m,
3400 (status & EAGLE_TXD_STATUS_OK) == 0);
3403 ds->Status = htole32(EAGLE_TXD_STATUS_IDLE);
3405 bus_dmamap_sync(sc->sc_dmat, bf->bf_dmamap,
3406 BUS_DMASYNC_POSTWRITE);
3407 bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap);
3409 mwl_puttxbuf_tail(txq, bf);
3412 #undef EAGLE_TXD_STATUS_MCAST
3416 * Deferred processing of transmit interrupt; special-cased
3417 * for four hardware queues, 0-3.
3420 mwl_tx_proc(void *arg, int npending)
3422 struct mwl_softc *sc = arg;
3426 * Process each active queue.
3429 if (!STAILQ_EMPTY(&sc->sc_txq[0].active))
3430 nreaped += mwl_tx_processq(sc, &sc->sc_txq[0]);
3431 if (!STAILQ_EMPTY(&sc->sc_txq[1].active))
3432 nreaped += mwl_tx_processq(sc, &sc->sc_txq[1]);
3433 if (!STAILQ_EMPTY(&sc->sc_txq[2].active))
3434 nreaped += mwl_tx_processq(sc, &sc->sc_txq[2]);
3435 if (!STAILQ_EMPTY(&sc->sc_txq[3].active))
3436 nreaped += mwl_tx_processq(sc, &sc->sc_txq[3]);
3439 sc->sc_tx_timer = 0;
3440 if (mbufq_first(&sc->sc_snd) != NULL) {
3441 /* NB: kick fw; the tx thread may have been preempted */
3442 mwl_hal_txstart(sc->sc_mh, 0);
3449 mwl_tx_draintxq(struct mwl_softc *sc, struct mwl_txq *txq)
3451 struct ieee80211_node *ni;
3452 struct mwl_txbuf *bf;
3456 * NB: this assumes output has been stopped and
3457 * we do not need to block mwl_tx_tasklet
3459 for (ix = 0;; ix++) {
3461 bf = STAILQ_FIRST(&txq->active);
3463 MWL_TXQ_UNLOCK(txq);
3466 STAILQ_REMOVE_HEAD(&txq->active, bf_list);
3467 MWL_TXQ_UNLOCK(txq);
3469 if (sc->sc_debug & MWL_DEBUG_RESET) {
3470 struct ieee80211com *ic = &sc->sc_ic;
3471 const struct mwltxrec *tr =
3472 mtod(bf->bf_m, const struct mwltxrec *);
3473 mwl_printtxbuf(bf, txq->qnum, ix);
3474 ieee80211_dump_pkt(ic, (const uint8_t *)&tr->wh,
3475 bf->bf_m->m_len - sizeof(tr->fwlen), 0, -1);
3477 #endif /* MWL_DEBUG */
3478 bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap);
3482 * Reclaim node reference.
3484 ieee80211_free_node(ni);
3488 mwl_puttxbuf_tail(txq, bf);
3493 * Drain the transmit queues and reclaim resources.
3496 mwl_draintxq(struct mwl_softc *sc)
3500 for (i = 0; i < MWL_NUM_TX_QUEUES; i++)
3501 mwl_tx_draintxq(sc, &sc->sc_txq[i]);
3502 sc->sc_tx_timer = 0;
3507 * Reset the transmit queues to a pristine state after a fw download.
3510 mwl_resettxq(struct mwl_softc *sc)
3514 for (i = 0; i < MWL_NUM_TX_QUEUES; i++)
3515 mwl_txq_reset(sc, &sc->sc_txq[i]);
3517 #endif /* MWL_DIAGAPI */
3520 * Clear the transmit queues of any frames submitted for the
3521 * specified vap. This is done when the vap is deleted so we
3522 * don't potentially reference the vap after it is gone.
3523 * Note we cannot remove the frames; we only reclaim the node
3527 mwl_cleartxq(struct mwl_softc *sc, struct ieee80211vap *vap)
3529 struct mwl_txq *txq;
3530 struct mwl_txbuf *bf;
3533 for (i = 0; i < MWL_NUM_TX_QUEUES; i++) {
3534 txq = &sc->sc_txq[i];
3536 STAILQ_FOREACH(bf, &txq->active, bf_list) {
3537 struct ieee80211_node *ni = bf->bf_node;
3538 if (ni != NULL && ni->ni_vap == vap) {
3540 ieee80211_free_node(ni);
3543 MWL_TXQ_UNLOCK(txq);
3548 mwl_recv_action(struct ieee80211_node *ni, const struct ieee80211_frame *wh,
3549 const uint8_t *frm, const uint8_t *efrm)
3551 struct mwl_softc *sc = ni->ni_ic->ic_softc;
3552 const struct ieee80211_action *ia;
3554 ia = (const struct ieee80211_action *) frm;
3555 if (ia->ia_category == IEEE80211_ACTION_CAT_HT &&
3556 ia->ia_action == IEEE80211_ACTION_HT_MIMOPWRSAVE) {
3557 const struct ieee80211_action_ht_mimopowersave *mps =
3558 (const struct ieee80211_action_ht_mimopowersave *) ia;
3560 mwl_hal_setmimops(sc->sc_mh, ni->ni_macaddr,
3561 mps->am_control & IEEE80211_A_HT_MIMOPWRSAVE_ENA,
3562 MS(mps->am_control, IEEE80211_A_HT_MIMOPWRSAVE_MODE));
3565 return sc->sc_recv_action(ni, wh, frm, efrm);
3569 mwl_addba_request(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap,
3570 int dialogtoken, int baparamset, int batimeout)
3572 struct mwl_softc *sc = ni->ni_ic->ic_softc;
3573 struct ieee80211vap *vap = ni->ni_vap;
3574 struct mwl_node *mn = MWL_NODE(ni);
3575 struct mwl_bastate *bas;
3577 bas = tap->txa_private;
3579 const MWL_HAL_BASTREAM *sp;
3581 * Check for a free BA stream slot.
3584 if (mn->mn_ba[3].bastream == NULL)
3585 bas = &mn->mn_ba[3];
3589 if (mn->mn_ba[2].bastream == NULL)
3590 bas = &mn->mn_ba[2];
3594 if (mn->mn_ba[1].bastream == NULL)
3595 bas = &mn->mn_ba[1];
3599 if (mn->mn_ba[0].bastream == NULL)
3600 bas = &mn->mn_ba[0];
3604 /* sta already has max BA streams */
3605 /* XXX assign BA stream to highest priority tid */
3606 DPRINTF(sc, MWL_DEBUG_AMPDU,
3607 "%s: already has max bastreams\n", __func__);
3608 sc->sc_stats.mst_ampdu_reject++;
3611 /* NB: no held reference to ni */
3612 sp = mwl_hal_bastream_alloc(MWL_VAP(vap)->mv_hvap,
3613 (baparamset & IEEE80211_BAPS_POLICY_IMMEDIATE) != 0,
3614 ni->ni_macaddr, tap->txa_tid, ni->ni_htparam,
3618 * No available stream, return 0 so no
3619 * a-mpdu aggregation will be done.
3621 DPRINTF(sc, MWL_DEBUG_AMPDU,
3622 "%s: no bastream available\n", __func__);
3623 sc->sc_stats.mst_ampdu_nostream++;
3626 DPRINTF(sc, MWL_DEBUG_AMPDU, "%s: alloc bastream %p\n",
3628 /* NB: qos is left zero so we won't match in mwl_tx_start */
3630 tap->txa_private = bas;
3632 /* fetch current seq# from the firmware; if available */
3633 if (mwl_hal_bastream_get_seqno(sc->sc_mh, bas->bastream,
3634 vap->iv_opmode == IEEE80211_M_STA ? vap->iv_myaddr : ni->ni_macaddr,
3635 &tap->txa_start) != 0)
3637 return sc->sc_addba_request(ni, tap, dialogtoken, baparamset, batimeout);
3641 mwl_addba_response(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap,
3642 int code, int baparamset, int batimeout)
3644 struct mwl_softc *sc = ni->ni_ic->ic_softc;
3645 struct mwl_bastate *bas;
3647 bas = tap->txa_private;
3649 /* XXX should not happen */
3650 DPRINTF(sc, MWL_DEBUG_AMPDU,
3651 "%s: no BA stream allocated, TID %d\n",
3652 __func__, tap->txa_tid);
3653 sc->sc_stats.mst_addba_nostream++;
3656 if (code == IEEE80211_STATUS_SUCCESS) {
3657 struct ieee80211vap *vap = ni->ni_vap;
3661 * Tell the firmware to setup the BA stream;
3662 * we know resources are available because we
3663 * pre-allocated one before forming the request.
3665 bufsiz = MS(baparamset, IEEE80211_BAPS_BUFSIZ);
3667 bufsiz = IEEE80211_AGGR_BAWMAX;
3668 error = mwl_hal_bastream_create(MWL_VAP(vap)->mv_hvap,
3669 bas->bastream, bufsiz, bufsiz, tap->txa_start);
3672 * Setup failed, return immediately so no a-mpdu
3673 * aggregation will be done.
3675 mwl_hal_bastream_destroy(sc->sc_mh, bas->bastream);
3676 mwl_bastream_free(bas);
3677 tap->txa_private = NULL;
3679 DPRINTF(sc, MWL_DEBUG_AMPDU,
3680 "%s: create failed, error %d, bufsiz %d TID %d "
3681 "htparam 0x%x\n", __func__, error, bufsiz,
3682 tap->txa_tid, ni->ni_htparam);
3683 sc->sc_stats.mst_bacreate_failed++;
3686 /* NB: cache txq to avoid ptr indirect */
3687 mwl_bastream_setup(bas, tap->txa_tid, bas->bastream->txq);
3688 DPRINTF(sc, MWL_DEBUG_AMPDU,
3689 "%s: bastream %p assigned to txq %d TID %d bufsiz %d "
3690 "htparam 0x%x\n", __func__, bas->bastream,
3691 bas->txq, tap->txa_tid, bufsiz, ni->ni_htparam);
3694 * Other side NAK'd us; return the resources.
3696 DPRINTF(sc, MWL_DEBUG_AMPDU,
3697 "%s: request failed with code %d, destroy bastream %p\n",
3698 __func__, code, bas->bastream);
3699 mwl_hal_bastream_destroy(sc->sc_mh, bas->bastream);
3700 mwl_bastream_free(bas);
3701 tap->txa_private = NULL;
3703 /* NB: firmware sends BAR so we don't need to */
3704 return sc->sc_addba_response(ni, tap, code, baparamset, batimeout);
3708 mwl_addba_stop(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap)
3710 struct mwl_softc *sc = ni->ni_ic->ic_softc;
3711 struct mwl_bastate *bas;
3713 bas = tap->txa_private;
3715 DPRINTF(sc, MWL_DEBUG_AMPDU, "%s: destroy bastream %p\n",
3716 __func__, bas->bastream);
3717 mwl_hal_bastream_destroy(sc->sc_mh, bas->bastream);
3718 mwl_bastream_free(bas);
3719 tap->txa_private = NULL;
3721 sc->sc_addba_stop(ni, tap);
3725 * Setup the rx data structures. This should only be
3726 * done once or we may get out of sync with the firmware.
3729 mwl_startrecv(struct mwl_softc *sc)
3731 if (!sc->sc_recvsetup) {
3732 struct mwl_rxbuf *bf, *prev;
3733 struct mwl_rxdesc *ds;
3736 STAILQ_FOREACH(bf, &sc->sc_rxbuf, bf_list) {
3737 int error = mwl_rxbuf_init(sc, bf);
3739 DPRINTF(sc, MWL_DEBUG_RECV,
3740 "%s: mwl_rxbuf_init failed %d\n",
3746 ds->pPhysNext = htole32(bf->bf_daddr);
3753 htole32(STAILQ_FIRST(&sc->sc_rxbuf)->bf_daddr);
3755 sc->sc_recvsetup = 1;
3757 mwl_mode_init(sc); /* set filters, etc. */
3761 static MWL_HAL_APMODE
3762 mwl_getapmode(const struct ieee80211vap *vap, struct ieee80211_channel *chan)
3764 MWL_HAL_APMODE mode;
3766 if (IEEE80211_IS_CHAN_HT(chan)) {
3767 if (vap->iv_flags_ht & IEEE80211_FHT_PUREN)
3768 mode = AP_MODE_N_ONLY;
3769 else if (IEEE80211_IS_CHAN_5GHZ(chan))
3770 mode = AP_MODE_AandN;
3771 else if (vap->iv_flags & IEEE80211_F_PUREG)
3772 mode = AP_MODE_GandN;
3774 mode = AP_MODE_BandGandN;
3775 } else if (IEEE80211_IS_CHAN_ANYG(chan)) {
3776 if (vap->iv_flags & IEEE80211_F_PUREG)
3777 mode = AP_MODE_G_ONLY;
3779 mode = AP_MODE_MIXED;
3780 } else if (IEEE80211_IS_CHAN_B(chan))
3781 mode = AP_MODE_B_ONLY;
3782 else if (IEEE80211_IS_CHAN_A(chan))
3783 mode = AP_MODE_A_ONLY;
3785 mode = AP_MODE_MIXED; /* XXX should not happen? */
3790 mwl_setapmode(struct ieee80211vap *vap, struct ieee80211_channel *chan)
3792 struct mwl_hal_vap *hvap = MWL_VAP(vap)->mv_hvap;
3793 return mwl_hal_setapmode(hvap, mwl_getapmode(vap, chan));
3797 * Set/change channels.
3800 mwl_chan_set(struct mwl_softc *sc, struct ieee80211_channel *chan)
3802 struct mwl_hal *mh = sc->sc_mh;
3803 struct ieee80211com *ic = &sc->sc_ic;
3804 MWL_HAL_CHANNEL hchan;
3807 DPRINTF(sc, MWL_DEBUG_RESET, "%s: chan %u MHz/flags 0x%x\n",
3808 __func__, chan->ic_freq, chan->ic_flags);
3811 * Convert to a HAL channel description with
3812 * the flags constrained to reflect the current
3815 mwl_mapchan(&hchan, chan);
3816 mwl_hal_intrset(mh, 0); /* disable interrupts */
3818 mwl_draintxq(sc); /* clear pending tx frames */
3820 mwl_hal_setchannel(mh, &hchan);
3822 * Tx power is cap'd by the regulatory setting and
3823 * possibly a user-set limit. We pass the min of
3824 * these to the hal to apply them to the cal data
3828 maxtxpow = 2*chan->ic_maxregpower;
3829 if (maxtxpow > ic->ic_txpowlimit)
3830 maxtxpow = ic->ic_txpowlimit;
3831 mwl_hal_settxpower(mh, &hchan, maxtxpow / 2);
3832 /* NB: potentially change mcast/mgt rates */
3833 mwl_setcurchanrates(sc);
3836 * Update internal state.
3838 sc->sc_tx_th.wt_chan_freq = htole16(chan->ic_freq);
3839 sc->sc_rx_th.wr_chan_freq = htole16(chan->ic_freq);
3840 if (IEEE80211_IS_CHAN_A(chan)) {
3841 sc->sc_tx_th.wt_chan_flags = htole16(IEEE80211_CHAN_A);
3842 sc->sc_rx_th.wr_chan_flags = htole16(IEEE80211_CHAN_A);
3843 } else if (IEEE80211_IS_CHAN_ANYG(chan)) {
3844 sc->sc_tx_th.wt_chan_flags = htole16(IEEE80211_CHAN_G);
3845 sc->sc_rx_th.wr_chan_flags = htole16(IEEE80211_CHAN_G);
3847 sc->sc_tx_th.wt_chan_flags = htole16(IEEE80211_CHAN_B);
3848 sc->sc_rx_th.wr_chan_flags = htole16(IEEE80211_CHAN_B);
3850 sc->sc_curchan = hchan;
3851 mwl_hal_intrset(mh, sc->sc_imask);
3857 mwl_scan_start(struct ieee80211com *ic)
3859 struct mwl_softc *sc = ic->ic_softc;
3861 DPRINTF(sc, MWL_DEBUG_STATE, "%s\n", __func__);
3865 mwl_scan_end(struct ieee80211com *ic)
3867 struct mwl_softc *sc = ic->ic_softc;
3869 DPRINTF(sc, MWL_DEBUG_STATE, "%s\n", __func__);
3873 mwl_set_channel(struct ieee80211com *ic)
3875 struct mwl_softc *sc = ic->ic_softc;
3877 (void) mwl_chan_set(sc, ic->ic_curchan);
3881 * Handle a channel switch request. We inform the firmware
3882 * and mark the global state to suppress various actions.
3883 * NB: we issue only one request to the fw; we may be called
3884 * multiple times if there are multiple vap's.
3887 mwl_startcsa(struct ieee80211vap *vap)
3889 struct ieee80211com *ic = vap->iv_ic;
3890 struct mwl_softc *sc = ic->ic_softc;
3891 MWL_HAL_CHANNEL hchan;
3893 if (sc->sc_csapending)
3896 mwl_mapchan(&hchan, ic->ic_csa_newchan);
3897 /* 1 =>'s quiet channel */
3898 mwl_hal_setchannelswitchie(sc->sc_mh, &hchan, 1, ic->ic_csa_count);
3899 sc->sc_csapending = 1;
3903 * Plumb any static WEP key for the station. This is
3904 * necessary as we must propagate the key from the
3905 * global key table of the vap to each sta db entry.
3908 mwl_setanywepkey(struct ieee80211vap *vap, const uint8_t mac[IEEE80211_ADDR_LEN])
3910 if ((vap->iv_flags & (IEEE80211_F_PRIVACY|IEEE80211_F_WPA)) ==
3911 IEEE80211_F_PRIVACY &&
3912 vap->iv_def_txkey != IEEE80211_KEYIX_NONE &&
3913 vap->iv_nw_keys[vap->iv_def_txkey].wk_keyix != IEEE80211_KEYIX_NONE)
3914 (void) _mwl_key_set(vap, &vap->iv_nw_keys[vap->iv_def_txkey],
3919 mwl_peerstadb(struct ieee80211_node *ni, int aid, int staid, MWL_HAL_PEERINFO *pi)
3921 #define WME(ie) ((const struct ieee80211_wme_info *) ie)
3922 struct ieee80211vap *vap = ni->ni_vap;
3923 struct mwl_hal_vap *hvap;
3926 if (vap->iv_opmode == IEEE80211_M_WDS) {
3928 * WDS vap's do not have a f/w vap; instead they piggyback
3929 * on an AP vap and we must install the sta db entry and
3930 * crypto state using that AP's handle (the WDS vap has none).
3932 hvap = MWL_VAP(vap)->mv_ap_hvap;
3934 hvap = MWL_VAP(vap)->mv_hvap;
3935 error = mwl_hal_newstation(hvap, ni->ni_macaddr,
3937 ni->ni_flags & (IEEE80211_NODE_QOS | IEEE80211_NODE_HT),
3938 ni->ni_ies.wme_ie != NULL ? WME(ni->ni_ies.wme_ie)->wme_info : 0);
3941 * Setup security for this station. For sta mode this is
3942 * needed even though do the same thing on transition to
3943 * AUTH state because the call to mwl_hal_newstation
3944 * clobbers the crypto state we setup.
3946 mwl_setanywepkey(vap, ni->ni_macaddr);
3953 mwl_setglobalkeys(struct ieee80211vap *vap)
3955 struct ieee80211_key *wk;
3957 wk = &vap->iv_nw_keys[0];
3958 for (; wk < &vap->iv_nw_keys[IEEE80211_WEP_NKID]; wk++)
3959 if (wk->wk_keyix != IEEE80211_KEYIX_NONE)
3960 (void) _mwl_key_set(vap, wk, vap->iv_myaddr);
3964 * Convert a legacy rate set to a firmware bitmask.
3967 get_rate_bitmap(const struct ieee80211_rateset *rs)
3973 for (i = 0; i < rs->rs_nrates; i++)
3974 switch (rs->rs_rates[i] & IEEE80211_RATE_VAL) {
3975 case 2: rates |= 0x001; break;
3976 case 4: rates |= 0x002; break;
3977 case 11: rates |= 0x004; break;
3978 case 22: rates |= 0x008; break;
3979 case 44: rates |= 0x010; break;
3980 case 12: rates |= 0x020; break;
3981 case 18: rates |= 0x040; break;
3982 case 24: rates |= 0x080; break;
3983 case 36: rates |= 0x100; break;
3984 case 48: rates |= 0x200; break;
3985 case 72: rates |= 0x400; break;
3986 case 96: rates |= 0x800; break;
3987 case 108: rates |= 0x1000; break;
3993 * Construct an HT firmware bitmask from an HT rate set.
3996 get_htrate_bitmap(const struct ieee80211_htrateset *rs)
4002 for (i = 0; i < rs->rs_nrates; i++) {
4003 if (rs->rs_rates[i] < 16)
4004 rates |= 1<<rs->rs_rates[i];
4010 * Craft station database entry for station.
4011 * NB: use host byte order here, the hal handles byte swapping.
4013 static MWL_HAL_PEERINFO *
4014 mkpeerinfo(MWL_HAL_PEERINFO *pi, const struct ieee80211_node *ni)
4016 const struct ieee80211vap *vap = ni->ni_vap;
4018 memset(pi, 0, sizeof(*pi));
4019 pi->LegacyRateBitMap = get_rate_bitmap(&ni->ni_rates);
4020 pi->CapInfo = ni->ni_capinfo;
4021 if (ni->ni_flags & IEEE80211_NODE_HT) {
4022 /* HT capabilities, etc */
4023 pi->HTCapabilitiesInfo = ni->ni_htcap;
4024 /* XXX pi.HTCapabilitiesInfo */
4025 pi->MacHTParamInfo = ni->ni_htparam;
4026 pi->HTRateBitMap = get_htrate_bitmap(&ni->ni_htrates);
4027 pi->AddHtInfo.ControlChan = ni->ni_htctlchan;
4028 pi->AddHtInfo.AddChan = ni->ni_ht2ndchan;
4029 pi->AddHtInfo.OpMode = ni->ni_htopmode;
4030 pi->AddHtInfo.stbc = ni->ni_htstbc;
4032 /* constrain according to local configuration */
4033 if ((vap->iv_flags_ht & IEEE80211_FHT_SHORTGI40) == 0)
4034 pi->HTCapabilitiesInfo &= ~IEEE80211_HTCAP_SHORTGI40;
4035 if ((vap->iv_flags_ht & IEEE80211_FHT_SHORTGI20) == 0)
4036 pi->HTCapabilitiesInfo &= ~IEEE80211_HTCAP_SHORTGI20;
4037 if (ni->ni_chw != 40)
4038 pi->HTCapabilitiesInfo &= ~IEEE80211_HTCAP_CHWIDTH40;
4044 * Re-create the local sta db entry for a vap to ensure
4045 * up to date WME state is pushed to the firmware. Because
4046 * this resets crypto state this must be followed by a
4047 * reload of any keys in the global key table.
4050 mwl_localstadb(struct ieee80211vap *vap)
4052 #define WME(ie) ((const struct ieee80211_wme_info *) ie)
4053 struct mwl_hal_vap *hvap = MWL_VAP(vap)->mv_hvap;
4054 struct ieee80211_node *bss;
4055 MWL_HAL_PEERINFO pi;
4058 switch (vap->iv_opmode) {
4059 case IEEE80211_M_STA:
4061 error = mwl_hal_newstation(hvap, vap->iv_myaddr, 0, 0,
4062 vap->iv_state == IEEE80211_S_RUN ?
4063 mkpeerinfo(&pi, bss) : NULL,
4064 (bss->ni_flags & (IEEE80211_NODE_QOS | IEEE80211_NODE_HT)),
4065 bss->ni_ies.wme_ie != NULL ?
4066 WME(bss->ni_ies.wme_ie)->wme_info : 0);
4068 mwl_setglobalkeys(vap);
4070 case IEEE80211_M_HOSTAP:
4071 case IEEE80211_M_MBSS:
4072 error = mwl_hal_newstation(hvap, vap->iv_myaddr,
4073 0, 0, NULL, vap->iv_flags & IEEE80211_F_WME, 0);
4075 mwl_setglobalkeys(vap);
4086 mwl_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg)
4088 struct mwl_vap *mvp = MWL_VAP(vap);
4089 struct mwl_hal_vap *hvap = mvp->mv_hvap;
4090 struct ieee80211com *ic = vap->iv_ic;
4091 struct ieee80211_node *ni = NULL;
4092 struct mwl_softc *sc = ic->ic_softc;
4093 struct mwl_hal *mh = sc->sc_mh;
4094 enum ieee80211_state ostate = vap->iv_state;
4097 DPRINTF(sc, MWL_DEBUG_STATE, "%s: %s: %s -> %s\n",
4098 vap->iv_ifp->if_xname, __func__,
4099 ieee80211_state_name[ostate], ieee80211_state_name[nstate]);
4101 callout_stop(&sc->sc_timer);
4103 * Clear current radar detection state.
4105 if (ostate == IEEE80211_S_CAC) {
4106 /* stop quiet mode radar detection */
4107 mwl_hal_setradardetection(mh, DR_CHK_CHANNEL_AVAILABLE_STOP);
4108 } else if (sc->sc_radarena) {
4109 /* stop in-service radar detection */
4110 mwl_hal_setradardetection(mh, DR_DFS_DISABLE);
4111 sc->sc_radarena = 0;
4114 * Carry out per-state actions before doing net80211 work.
4116 if (nstate == IEEE80211_S_INIT) {
4117 /* NB: only ap+sta vap's have a fw entity */
4120 } else if (nstate == IEEE80211_S_SCAN) {
4121 mwl_hal_start(hvap);
4122 /* NB: this disables beacon frames */
4123 mwl_hal_setinframode(hvap);
4124 } else if (nstate == IEEE80211_S_AUTH) {
4126 * Must create a sta db entry in case a WEP key needs to
4127 * be plumbed. This entry will be overwritten if we
4128 * associate; otherwise it will be reclaimed on node free.
4131 MWL_NODE(ni)->mn_hvap = hvap;
4132 (void) mwl_peerstadb(ni, 0, 0, NULL);
4133 } else if (nstate == IEEE80211_S_CSA) {
4134 /* XXX move to below? */
4135 if (vap->iv_opmode == IEEE80211_M_HOSTAP ||
4136 vap->iv_opmode == IEEE80211_M_MBSS)
4138 } else if (nstate == IEEE80211_S_CAC) {
4139 /* XXX move to below? */
4140 /* stop ap xmit and enable quiet mode radar detection */
4141 mwl_hal_setradardetection(mh, DR_CHK_CHANNEL_AVAILABLE_START);
4145 * Invoke the parent method to do net80211 work.
4147 error = mvp->mv_newstate(vap, nstate, arg);
4150 * Carry out work that must be done after net80211 runs;
4151 * this work requires up to date state (e.g. iv_bss).
4153 if (error == 0 && nstate == IEEE80211_S_RUN) {
4154 /* NB: collect bss node again, it may have changed */
4157 DPRINTF(sc, MWL_DEBUG_STATE,
4158 "%s: %s(RUN): iv_flags 0x%08x bintvl %d bssid %s "
4159 "capinfo 0x%04x chan %d\n",
4160 vap->iv_ifp->if_xname, __func__, vap->iv_flags,
4161 ni->ni_intval, ether_sprintf(ni->ni_bssid), ni->ni_capinfo,
4162 ieee80211_chan2ieee(ic, ic->ic_curchan));
4165 * Recreate local sta db entry to update WME/HT state.
4167 mwl_localstadb(vap);
4168 switch (vap->iv_opmode) {
4169 case IEEE80211_M_HOSTAP:
4170 case IEEE80211_M_MBSS:
4171 if (ostate == IEEE80211_S_CAC) {
4172 /* enable in-service radar detection */
4173 mwl_hal_setradardetection(mh,
4174 DR_IN_SERVICE_MONITOR_START);
4175 sc->sc_radarena = 1;
4178 * Allocate and setup the beacon frame
4179 * (and related state).
4181 error = mwl_reset_vap(vap, IEEE80211_S_RUN);
4183 DPRINTF(sc, MWL_DEBUG_STATE,
4184 "%s: beacon setup failed, error %d\n",
4188 /* NB: must be after setting up beacon */
4189 mwl_hal_start(hvap);
4191 case IEEE80211_M_STA:
4192 DPRINTF(sc, MWL_DEBUG_STATE, "%s: %s: aid 0x%x\n",
4193 vap->iv_ifp->if_xname, __func__, ni->ni_associd);
4195 * Set state now that we're associated.
4197 mwl_hal_setassocid(hvap, ni->ni_bssid, ni->ni_associd);
4199 mwl_hal_setrtsthreshold(hvap, vap->iv_rtsthreshold);
4200 if ((vap->iv_flags & IEEE80211_F_DWDS) &&
4201 sc->sc_ndwdsvaps++ == 0)
4202 mwl_hal_setdwds(mh, 1);
4204 case IEEE80211_M_WDS:
4205 DPRINTF(sc, MWL_DEBUG_STATE, "%s: %s: bssid %s\n",
4206 vap->iv_ifp->if_xname, __func__,
4207 ether_sprintf(ni->ni_bssid));
4208 mwl_seteapolformat(vap);
4214 * Set CS mode according to operating channel;
4215 * this mostly an optimization for 5GHz.
4217 * NB: must follow mwl_hal_start which resets csmode
4219 if (IEEE80211_IS_CHAN_5GHZ(ic->ic_bsschan))
4220 mwl_hal_setcsmode(mh, CSMODE_AGGRESSIVE);
4222 mwl_hal_setcsmode(mh, CSMODE_AUTO_ENA);
4224 * Start timer to prod firmware.
4226 if (sc->sc_ageinterval != 0)
4227 callout_reset(&sc->sc_timer, sc->sc_ageinterval*hz,
4228 mwl_agestations, sc);
4229 } else if (nstate == IEEE80211_S_SLEEP) {
4230 /* XXX set chip in power save */
4231 } else if ((vap->iv_flags & IEEE80211_F_DWDS) &&
4232 --sc->sc_ndwdsvaps == 0)
4233 mwl_hal_setdwds(mh, 0);
4239 * Manage station id's; these are separate from AID's
4240 * as AID's may have values out of the range of possible
4241 * station id's acceptable to the firmware.
4244 allocstaid(struct mwl_softc *sc, int aid)
4248 if (!(0 < aid && aid < MWL_MAXSTAID) || isset(sc->sc_staid, aid)) {
4249 /* NB: don't use 0 */
4250 for (staid = 1; staid < MWL_MAXSTAID; staid++)
4251 if (isclr(sc->sc_staid, staid))
4255 setbit(sc->sc_staid, staid);
4260 delstaid(struct mwl_softc *sc, int staid)
4262 clrbit(sc->sc_staid, staid);
4266 * Setup driver-specific state for a newly associated node.
4267 * Note that we're called also on a re-associate, the isnew
4268 * param tells us if this is the first time or not.
4271 mwl_newassoc(struct ieee80211_node *ni, int isnew)
4273 struct ieee80211vap *vap = ni->ni_vap;
4274 struct mwl_softc *sc = vap->iv_ic->ic_softc;
4275 struct mwl_node *mn = MWL_NODE(ni);
4276 MWL_HAL_PEERINFO pi;
4280 aid = IEEE80211_AID(ni->ni_associd);
4282 mn->mn_staid = allocstaid(sc, aid);
4283 mn->mn_hvap = MWL_VAP(vap)->mv_hvap;
4286 /* XXX reset BA stream? */
4288 DPRINTF(sc, MWL_DEBUG_NODE, "%s: mac %s isnew %d aid %d staid %d\n",
4289 __func__, ether_sprintf(ni->ni_macaddr), isnew, aid, mn->mn_staid);
4290 error = mwl_peerstadb(ni, aid, mn->mn_staid, mkpeerinfo(&pi, ni));
4292 DPRINTF(sc, MWL_DEBUG_NODE,
4293 "%s: error %d creating sta db entry\n",
4295 /* XXX how to deal with error? */
4300 * Periodically poke the firmware to age out station state
4301 * (power save queues, pending tx aggregates).
4304 mwl_agestations(void *arg)
4306 struct mwl_softc *sc = arg;
4308 mwl_hal_setkeepalive(sc->sc_mh);
4309 if (sc->sc_ageinterval != 0) /* NB: catch dynamic changes */
4310 callout_schedule(&sc->sc_timer, sc->sc_ageinterval*hz);
4313 static const struct mwl_hal_channel *
4314 findhalchannel(const MWL_HAL_CHANNELINFO *ci, int ieee)
4318 for (i = 0; i < ci->nchannels; i++) {
4319 const struct mwl_hal_channel *hc = &ci->channels[i];
4320 if (hc->ieee == ieee)
4327 mwl_setregdomain(struct ieee80211com *ic, struct ieee80211_regdomain *rd,
4328 int nchan, struct ieee80211_channel chans[])
4330 struct mwl_softc *sc = ic->ic_softc;
4331 struct mwl_hal *mh = sc->sc_mh;
4332 const MWL_HAL_CHANNELINFO *ci;
4335 for (i = 0; i < nchan; i++) {
4336 struct ieee80211_channel *c = &chans[i];
4337 const struct mwl_hal_channel *hc;
4339 if (IEEE80211_IS_CHAN_2GHZ(c)) {
4340 mwl_hal_getchannelinfo(mh, MWL_FREQ_BAND_2DOT4GHZ,
4341 IEEE80211_IS_CHAN_HT40(c) ?
4342 MWL_CH_40_MHz_WIDTH : MWL_CH_20_MHz_WIDTH, &ci);
4343 } else if (IEEE80211_IS_CHAN_5GHZ(c)) {
4344 mwl_hal_getchannelinfo(mh, MWL_FREQ_BAND_5GHZ,
4345 IEEE80211_IS_CHAN_HT40(c) ?
4346 MWL_CH_40_MHz_WIDTH : MWL_CH_20_MHz_WIDTH, &ci);
4348 device_printf(sc->sc_dev,
4349 "%s: channel %u freq %u/0x%x not 2.4/5GHz\n",
4350 __func__, c->ic_ieee, c->ic_freq, c->ic_flags);
4354 * Verify channel has cal data and cap tx power.
4356 hc = findhalchannel(ci, c->ic_ieee);
4358 if (c->ic_maxpower > 2*hc->maxTxPow)
4359 c->ic_maxpower = 2*hc->maxTxPow;
4362 if (IEEE80211_IS_CHAN_HT40(c)) {
4364 * Look for the extension channel since the
4365 * hal table only has the primary channel.
4367 hc = findhalchannel(ci, c->ic_extieee);
4369 if (c->ic_maxpower > 2*hc->maxTxPow)
4370 c->ic_maxpower = 2*hc->maxTxPow;
4374 device_printf(sc->sc_dev,
4375 "%s: no cal data for channel %u ext %u freq %u/0x%x\n",
4376 __func__, c->ic_ieee, c->ic_extieee,
4377 c->ic_freq, c->ic_flags);
4385 #define IEEE80211_CHAN_HTG (IEEE80211_CHAN_HT|IEEE80211_CHAN_G)
4386 #define IEEE80211_CHAN_HTA (IEEE80211_CHAN_HT|IEEE80211_CHAN_A)
4389 addht40channels(struct ieee80211_channel chans[], int maxchans, int *nchans,
4390 const MWL_HAL_CHANNELINFO *ci, int flags)
4394 for (i = 0; i < ci->nchannels; i++) {
4395 const struct mwl_hal_channel *hc = &ci->channels[i];
4397 error = ieee80211_add_channel_ht40(chans, maxchans, nchans,
4398 hc->ieee, hc->maxTxPow, flags);
4399 if (error != 0 && error != ENOENT)
4405 addchannels(struct ieee80211_channel chans[], int maxchans, int *nchans,
4406 const MWL_HAL_CHANNELINFO *ci, const uint8_t bands[])
4411 for (i = 0; i < ci->nchannels && error == 0; i++) {
4412 const struct mwl_hal_channel *hc = &ci->channels[i];
4414 error = ieee80211_add_channel(chans, maxchans, nchans,
4415 hc->ieee, hc->freq, hc->maxTxPow, 0, bands);
4420 getchannels(struct mwl_softc *sc, int maxchans, int *nchans,
4421 struct ieee80211_channel chans[])
4423 const MWL_HAL_CHANNELINFO *ci;
4424 uint8_t bands[IEEE80211_MODE_BYTES];
4427 * Use the channel info from the hal to craft the
4428 * channel list. Note that we pass back an unsorted
4429 * list; the caller is required to sort it for us
4433 if (mwl_hal_getchannelinfo(sc->sc_mh,
4434 MWL_FREQ_BAND_2DOT4GHZ, MWL_CH_20_MHz_WIDTH, &ci) == 0) {
4435 memset(bands, 0, sizeof(bands));
4436 setbit(bands, IEEE80211_MODE_11B);
4437 setbit(bands, IEEE80211_MODE_11G);
4438 setbit(bands, IEEE80211_MODE_11NG);
4439 addchannels(chans, maxchans, nchans, ci, bands);
4441 if (mwl_hal_getchannelinfo(sc->sc_mh,
4442 MWL_FREQ_BAND_5GHZ, MWL_CH_20_MHz_WIDTH, &ci) == 0) {
4443 memset(bands, 0, sizeof(bands));
4444 setbit(bands, IEEE80211_MODE_11A);
4445 setbit(bands, IEEE80211_MODE_11NA);
4446 addchannels(chans, maxchans, nchans, ci, bands);
4448 if (mwl_hal_getchannelinfo(sc->sc_mh,
4449 MWL_FREQ_BAND_2DOT4GHZ, MWL_CH_40_MHz_WIDTH, &ci) == 0)
4450 addht40channels(chans, maxchans, nchans, ci, IEEE80211_CHAN_HTG);
4451 if (mwl_hal_getchannelinfo(sc->sc_mh,
4452 MWL_FREQ_BAND_5GHZ, MWL_CH_40_MHz_WIDTH, &ci) == 0)
4453 addht40channels(chans, maxchans, nchans, ci, IEEE80211_CHAN_HTA);
4457 mwl_getradiocaps(struct ieee80211com *ic,
4458 int maxchans, int *nchans, struct ieee80211_channel chans[])
4460 struct mwl_softc *sc = ic->ic_softc;
4462 getchannels(sc, maxchans, nchans, chans);
4466 mwl_getchannels(struct mwl_softc *sc)
4468 struct ieee80211com *ic = &sc->sc_ic;
4471 * Use the channel info from the hal to craft the
4472 * channel list for net80211. Note that we pass up
4473 * an unsorted list; net80211 will sort it for us.
4475 memset(ic->ic_channels, 0, sizeof(ic->ic_channels));
4477 getchannels(sc, IEEE80211_CHAN_MAX, &ic->ic_nchans, ic->ic_channels);
4479 ic->ic_regdomain.regdomain = SKU_DEBUG;
4480 ic->ic_regdomain.country = CTRY_DEFAULT;
4481 ic->ic_regdomain.location = 'I';
4482 ic->ic_regdomain.isocc[0] = ' '; /* XXX? */
4483 ic->ic_regdomain.isocc[1] = ' ';
4484 return (ic->ic_nchans == 0 ? EIO : 0);
4486 #undef IEEE80211_CHAN_HTA
4487 #undef IEEE80211_CHAN_HTG
4491 mwl_printrxbuf(const struct mwl_rxbuf *bf, u_int ix)
4493 const struct mwl_rxdesc *ds = bf->bf_desc;
4494 uint32_t status = le32toh(ds->Status);
4496 printf("R[%2u] (DS.V:%p DS.P:0x%jx) NEXT:%08x DATA:%08x RC:%02x%s\n"
4497 " STAT:%02x LEN:%04x RSSI:%02x CHAN:%02x RATE:%02x QOS:%04x HT:%04x\n",
4498 ix, ds, (uintmax_t)bf->bf_daddr, le32toh(ds->pPhysNext),
4499 le32toh(ds->pPhysBuffData), ds->RxControl,
4500 ds->RxControl != EAGLE_RXD_CTRL_DRIVER_OWN ?
4501 "" : (status & EAGLE_RXD_STATUS_OK) ? " *" : " !",
4502 ds->Status, le16toh(ds->PktLen), ds->RSSI, ds->Channel,
4503 ds->Rate, le16toh(ds->QosCtrl), le16toh(ds->HtSig2));
4507 mwl_printtxbuf(const struct mwl_txbuf *bf, u_int qnum, u_int ix)
4509 const struct mwl_txdesc *ds = bf->bf_desc;
4510 uint32_t status = le32toh(ds->Status);
4512 printf("Q%u[%3u]", qnum, ix);
4513 printf(" (DS.V:%p DS.P:0x%jx)\n", ds, (uintmax_t)bf->bf_daddr);
4514 printf(" NEXT:%08x DATA:%08x LEN:%04x STAT:%08x%s\n",
4515 le32toh(ds->pPhysNext),
4516 le32toh(ds->PktPtr), le16toh(ds->PktLen), status,
4517 status & EAGLE_TXD_STATUS_USED ?
4518 "" : (status & 3) != 0 ? " *" : " !");
4519 printf(" RATE:%02x PRI:%x QOS:%04x SAP:%08x FORMAT:%04x\n",
4520 ds->DataRate, ds->TxPriority, le16toh(ds->QosCtrl),
4521 le32toh(ds->SapPktInfo), le16toh(ds->Format));
4523 printf(" MULTIFRAMES:%u LEN:%04x %04x %04x %04x %04x %04x\n"
4524 , le32toh(ds->multiframes)
4525 , le16toh(ds->PktLenArray[0]), le16toh(ds->PktLenArray[1])
4526 , le16toh(ds->PktLenArray[2]), le16toh(ds->PktLenArray[3])
4527 , le16toh(ds->PktLenArray[4]), le16toh(ds->PktLenArray[5])
4529 printf(" DATA:%08x %08x %08x %08x %08x %08x\n"
4530 , le32toh(ds->PktPtrArray[0]), le32toh(ds->PktPtrArray[1])
4531 , le32toh(ds->PktPtrArray[2]), le32toh(ds->PktPtrArray[3])
4532 , le32toh(ds->PktPtrArray[4]), le32toh(ds->PktPtrArray[5])
4536 { const uint8_t *cp = (const uint8_t *) ds;
4538 for (i = 0; i < sizeof(struct mwl_txdesc); i++) {
4539 printf("%02x ", cp[i]);
4540 if (((i+1) % 16) == 0)
4547 #endif /* MWL_DEBUG */
4551 mwl_txq_dump(struct mwl_txq *txq)
4553 struct mwl_txbuf *bf;
4557 STAILQ_FOREACH(bf, &txq->active, bf_list) {
4558 struct mwl_txdesc *ds = bf->bf_desc;
4559 MWL_TXDESC_SYNC(txq, ds,
4560 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
4562 mwl_printtxbuf(bf, txq->qnum, i);
4566 MWL_TXQ_UNLOCK(txq);
4571 mwl_watchdog(void *arg)
4573 struct mwl_softc *sc = arg;
4575 callout_reset(&sc->sc_watchdog, hz, mwl_watchdog, sc);
4576 if (sc->sc_tx_timer == 0 || --sc->sc_tx_timer > 0)
4579 if (sc->sc_running && !sc->sc_invalid) {
4580 if (mwl_hal_setkeepalive(sc->sc_mh))
4581 device_printf(sc->sc_dev,
4582 "transmit timeout (firmware hung?)\n");
4584 device_printf(sc->sc_dev,
4585 "transmit timeout\n");
4588 mwl_txq_dump(&sc->sc_txq[0]);/*XXX*/
4590 counter_u64_add(sc->sc_ic.ic_oerrors, 1);
4591 sc->sc_stats.mst_watchdog++;
4597 * Diagnostic interface to the HAL. This is used by various
4598 * tools to do things like retrieve register contents for
4599 * debugging. The mechanism is intentionally opaque so that
4600 * it can change frequently w/o concern for compatibility.
4603 mwl_ioctl_diag(struct mwl_softc *sc, struct mwl_diag *md)
4605 struct mwl_hal *mh = sc->sc_mh;
4606 u_int id = md->md_id & MWL_DIAG_ID;
4607 void *indata = NULL;
4608 void *outdata = NULL;
4609 u_int32_t insize = md->md_in_size;
4610 u_int32_t outsize = md->md_out_size;
4613 if (md->md_id & MWL_DIAG_IN) {
4617 indata = malloc(insize, M_TEMP, M_NOWAIT);
4618 if (indata == NULL) {
4622 error = copyin(md->md_in_data, indata, insize);
4626 if (md->md_id & MWL_DIAG_DYN) {
4628 * Allocate a buffer for the results (otherwise the HAL
4629 * returns a pointer to a buffer where we can read the
4630 * results). Note that we depend on the HAL leaving this
4631 * pointer for us to use below in reclaiming the buffer;
4632 * may want to be more defensive.
4634 outdata = malloc(outsize, M_TEMP, M_NOWAIT);
4635 if (outdata == NULL) {
4640 if (mwl_hal_getdiagstate(mh, id, indata, insize, &outdata, &outsize)) {
4641 if (outsize < md->md_out_size)
4642 md->md_out_size = outsize;
4643 if (outdata != NULL)
4644 error = copyout(outdata, md->md_out_data,
4650 if ((md->md_id & MWL_DIAG_IN) && indata != NULL)
4651 free(indata, M_TEMP);
4652 if ((md->md_id & MWL_DIAG_DYN) && outdata != NULL)
4653 free(outdata, M_TEMP);
4658 mwl_ioctl_reset(struct mwl_softc *sc, struct mwl_diag *md)
4660 struct mwl_hal *mh = sc->sc_mh;
4663 MWL_LOCK_ASSERT(sc);
4665 if (md->md_id == 0 && mwl_hal_fwload(mh, NULL) != 0) {
4666 device_printf(sc->sc_dev, "unable to load firmware\n");
4669 if (mwl_hal_gethwspecs(mh, &sc->sc_hwspecs) != 0) {
4670 device_printf(sc->sc_dev, "unable to fetch h/w specs\n");
4673 error = mwl_setupdma(sc);
4675 /* NB: mwl_setupdma prints a msg */
4679 * Reset tx/rx data structures; after reload we must
4680 * re-start the driver's notion of the next xmit/recv.
4682 mwl_draintxq(sc); /* clear pending frames */
4683 mwl_resettxq(sc); /* rebuild tx q lists */
4684 sc->sc_rxnext = NULL; /* force rx to start at the list head */
4687 #endif /* MWL_DIAGAPI */
4690 mwl_parent(struct ieee80211com *ic)
4692 struct mwl_softc *sc = ic->ic_softc;
4696 if (ic->ic_nrunning > 0) {
4697 if (sc->sc_running) {
4699 * To avoid rescanning another access point,
4700 * do not call mwl_init() here. Instead,
4701 * only reflect promisc mode settings.
4706 * Beware of being called during attach/detach
4707 * to reset promiscuous mode. In that case we
4708 * will still be marked UP but not RUNNING.
4709 * However trying to re-init the interface
4710 * is the wrong thing to do as we've already
4711 * torn down much of our state. There's
4712 * probably a better way to deal with this.
4714 if (!sc->sc_invalid) {
4715 mwl_init(sc); /* XXX lose error */
4723 ieee80211_start_all(ic);
4727 mwl_ioctl(struct ieee80211com *ic, u_long cmd, void *data)
4729 struct mwl_softc *sc = ic->ic_softc;
4730 struct ifreq *ifr = data;
4735 mwl_hal_gethwstats(sc->sc_mh, &sc->sc_stats.hw_stats);
4737 /* NB: embed these numbers to get a consistent view */
4738 sc->sc_stats.mst_tx_packets =
4739 ifp->if_get_counter(ifp, IFCOUNTER_OPACKETS);
4740 sc->sc_stats.mst_rx_packets =
4741 ifp->if_get_counter(ifp, IFCOUNTER_IPACKETS);
4744 * NB: Drop the softc lock in case of a page fault;
4745 * we'll accept any potential inconsisentcy in the
4746 * statistics. The alternative is to copy the data
4747 * to a local structure.
4749 return (copyout(&sc->sc_stats,
4750 ifr->ifr_data, sizeof (sc->sc_stats)));
4753 /* XXX check privs */
4754 return mwl_ioctl_diag(sc, (struct mwl_diag *) ifr);
4756 /* XXX check privs */
4758 error = mwl_ioctl_reset(sc,(struct mwl_diag *) ifr);
4761 #endif /* MWL_DIAGAPI */
4771 mwl_sysctl_debug(SYSCTL_HANDLER_ARGS)
4773 struct mwl_softc *sc = arg1;
4776 debug = sc->sc_debug | (mwl_hal_getdebug(sc->sc_mh) << 24);
4777 error = sysctl_handle_int(oidp, &debug, 0, req);
4778 if (error || !req->newptr)
4780 mwl_hal_setdebug(sc->sc_mh, debug >> 24);
4781 sc->sc_debug = debug & 0x00ffffff;
4784 #endif /* MWL_DEBUG */
4787 mwl_sysctlattach(struct mwl_softc *sc)
4790 struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(sc->sc_dev);
4791 struct sysctl_oid *tree = device_get_sysctl_tree(sc->sc_dev);
4793 sc->sc_debug = mwl_debug;
4794 SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
4795 "debug", CTLTYPE_INT | CTLFLAG_RW, sc, 0,
4796 mwl_sysctl_debug, "I", "control debugging printfs");
4801 * Announce various information on device/driver attach.
4804 mwl_announce(struct mwl_softc *sc)
4807 device_printf(sc->sc_dev, "Rev A%d hardware, v%d.%d.%d.%d firmware (regioncode %d)\n",
4808 sc->sc_hwspecs.hwVersion,
4809 (sc->sc_hwspecs.fwReleaseNumber>>24) & 0xff,
4810 (sc->sc_hwspecs.fwReleaseNumber>>16) & 0xff,
4811 (sc->sc_hwspecs.fwReleaseNumber>>8) & 0xff,
4812 (sc->sc_hwspecs.fwReleaseNumber>>0) & 0xff,
4813 sc->sc_hwspecs.regionCode);
4814 sc->sc_fwrelease = sc->sc_hwspecs.fwReleaseNumber;
4818 for (i = 0; i <= WME_AC_VO; i++) {
4819 struct mwl_txq *txq = sc->sc_ac2q[i];
4820 device_printf(sc->sc_dev, "Use hw queue %u for %s traffic\n",
4821 txq->qnum, ieee80211_wme_acnames[i]);
4824 if (bootverbose || mwl_rxdesc != MWL_RXDESC)
4825 device_printf(sc->sc_dev, "using %u rx descriptors\n", mwl_rxdesc);
4826 if (bootverbose || mwl_rxbuf != MWL_RXBUF)
4827 device_printf(sc->sc_dev, "using %u rx buffers\n", mwl_rxbuf);
4828 if (bootverbose || mwl_txbuf != MWL_TXBUF)
4829 device_printf(sc->sc_dev, "using %u tx buffers\n", mwl_txbuf);
4830 if (bootverbose && mwl_hal_ismbsscapable(sc->sc_mh))
4831 device_printf(sc->sc_dev, "multi-bss support\n");
4832 #ifdef MWL_TX_NODROP
4834 device_printf(sc->sc_dev, "no tx drop\n");