2 * Written by: yen_cw@myson.com.tw
3 * Copyright (c) 2002 Myson Technology Inc.
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions, and the following disclaimer,
11 * without modification, immediately at the beginning of the file.
12 * 2. The name of the author may not be used to endorse or promote products
13 * derived from this software without specific prior written permission.
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
19 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27 * Myson fast ethernet PCI NIC driver, available at: http://www.myson.com.tw/
30 #include <sys/cdefs.h>
31 __FBSDID("$FreeBSD$");
33 #include <sys/param.h>
34 #include <sys/systm.h>
35 #include <sys/sockio.h>
37 #include <sys/malloc.h>
38 #include <sys/kernel.h>
39 #include <sys/socket.h>
40 #include <sys/queue.h>
41 #include <sys/types.h>
43 #include <sys/module.h>
45 #include <sys/mutex.h>
50 #include <net/if_arp.h>
51 #include <net/ethernet.h>
52 #include <net/if_media.h>
53 #include <net/if_types.h>
54 #include <net/if_dl.h>
57 #include <vm/vm.h> /* for vtophys */
58 #include <vm/pmap.h> /* for vtophys */
59 #include <machine/clock.h> /* for DELAY */
60 #include <machine/bus.h>
61 #include <machine/resource.h>
65 #include <dev/pci/pcireg.h>
66 #include <dev/pci/pcivar.h>
68 #include <dev/mii/mii.h>
69 #include <dev/mii/miivar.h>
71 #include "miibus_if.h"
74 * #define MY_USEIOSPACE
77 static int MY_USEIOSPACE = 1;
80 #define MY_RES SYS_RES_IOPORT
81 #define MY_RID MY_PCI_LOIO
83 #define MY_RES SYS_RES_MEMORY
84 #define MY_RID MY_PCI_LOMEM
88 #include <dev/my/if_myreg.h>
91 static const char rcsid[] =
92 "$Id: if_my.c,v 1.16 2003/04/15 06:37:25 mdodd Exp $";
96 * Various supported device vendors/types and their names.
98 struct my_type *my_info_tmp;
99 static struct my_type my_devs[] = {
100 {MYSONVENDORID, MTD800ID, "Myson MTD80X Based Fast Ethernet Card"},
101 {MYSONVENDORID, MTD803ID, "Myson MTD80X Based Fast Ethernet Card"},
102 {MYSONVENDORID, MTD891ID, "Myson MTD89X Based Giga Ethernet Card"},
107 * Various supported PHY vendors/types and their names. Note that this driver
108 * will work with pretty much any MII-compliant PHY, so failure to positively
109 * identify the chip is not a fatal error.
111 static struct my_type my_phys[] = {
112 {MysonPHYID0, MysonPHYID0, "<MYSON MTD981>"},
113 {SeeqPHYID0, SeeqPHYID0, "<SEEQ 80225>"},
114 {AhdocPHYID0, AhdocPHYID0, "<AHDOC 101>"},
115 {MarvellPHYID0, MarvellPHYID0, "<MARVELL 88E1000>"},
116 {LevelOnePHYID0, LevelOnePHYID0, "<LevelOne LXT1000>"},
117 {0, 0, "<MII-compliant physical interface>"}
120 static int my_probe(device_t);
121 static int my_attach(device_t);
122 static int my_detach(device_t);
123 static int my_newbuf(struct my_softc *, struct my_chain_onefrag *);
124 static int my_encap(struct my_softc *, struct my_chain *, struct mbuf *);
125 static void my_rxeof(struct my_softc *);
126 static void my_txeof(struct my_softc *);
127 static void my_txeoc(struct my_softc *);
128 static void my_intr(void *);
129 static void my_start(struct ifnet *);
130 static void my_start_locked(struct ifnet *);
131 static int my_ioctl(struct ifnet *, u_long, caddr_t);
132 static void my_init(void *);
133 static void my_init_locked(struct my_softc *);
134 static void my_stop(struct my_softc *);
135 static void my_watchdog(struct ifnet *);
136 static void my_shutdown(device_t);
137 static int my_ifmedia_upd(struct ifnet *);
138 static void my_ifmedia_sts(struct ifnet *, struct ifmediareq *);
139 static u_int16_t my_phy_readreg(struct my_softc *, int);
140 static void my_phy_writereg(struct my_softc *, int, int);
141 static void my_autoneg_xmit(struct my_softc *);
142 static void my_autoneg_mii(struct my_softc *, int, int);
143 static void my_setmode_mii(struct my_softc *, int);
144 static void my_getmode_mii(struct my_softc *);
145 static void my_setcfg(struct my_softc *, int);
146 static void my_setmulti(struct my_softc *);
147 static void my_reset(struct my_softc *);
148 static int my_list_rx_init(struct my_softc *);
149 static int my_list_tx_init(struct my_softc *);
150 static long my_send_cmd_to_phy(struct my_softc *, int, int);
152 #define MY_SETBIT(sc, reg, x) CSR_WRITE_4(sc, reg, CSR_READ_4(sc, reg) | (x))
153 #define MY_CLRBIT(sc, reg, x) CSR_WRITE_4(sc, reg, CSR_READ_4(sc, reg) & ~(x))
155 static device_method_t my_methods[] = {
156 /* Device interface */
157 DEVMETHOD(device_probe, my_probe),
158 DEVMETHOD(device_attach, my_attach),
159 DEVMETHOD(device_detach, my_detach),
160 DEVMETHOD(device_shutdown, my_shutdown),
165 static driver_t my_driver = {
168 sizeof(struct my_softc)
171 static devclass_t my_devclass;
173 DRIVER_MODULE(my, pci, my_driver, my_devclass, 0, 0);
174 MODULE_DEPEND(my, pci, 1, 1, 1);
175 MODULE_DEPEND(my, ether, 1, 1, 1);
178 my_send_cmd_to_phy(struct my_softc * sc, int opcode, int regad)
186 /* enable MII output */
187 miir = CSR_READ_4(sc, MY_MANAGEMENT);
190 miir |= MY_MASK_MIIR_MII_WRITE + MY_MASK_MIIR_MII_MDO;
192 /* send 32 1's preamble */
193 for (i = 0; i < 32; i++) {
194 /* low MDC; MDO is already high (miir) */
195 miir &= ~MY_MASK_MIIR_MII_MDC;
196 CSR_WRITE_4(sc, MY_MANAGEMENT, miir);
199 miir |= MY_MASK_MIIR_MII_MDC;
200 CSR_WRITE_4(sc, MY_MANAGEMENT, miir);
203 /* calculate ST+OP+PHYAD+REGAD+TA */
204 data = opcode | (sc->my_phy_addr << 7) | (regad << 2);
209 /* low MDC, prepare MDO */
210 miir &= ~(MY_MASK_MIIR_MII_MDC + MY_MASK_MIIR_MII_MDO);
212 miir |= MY_MASK_MIIR_MII_MDO;
214 CSR_WRITE_4(sc, MY_MANAGEMENT, miir);
216 miir |= MY_MASK_MIIR_MII_MDC;
217 CSR_WRITE_4(sc, MY_MANAGEMENT, miir);
222 if (mask == 0x2 && opcode == MY_OP_READ)
223 miir &= ~MY_MASK_MIIR_MII_WRITE;
231 my_phy_readreg(struct my_softc * sc, int reg)
238 if (sc->my_info->my_did == MTD803ID)
239 data = CSR_READ_2(sc, MY_PHYBASE + reg * 2);
241 miir = my_send_cmd_to_phy(sc, MY_OP_READ, reg);
248 miir &= ~MY_MASK_MIIR_MII_MDC;
249 CSR_WRITE_4(sc, MY_MANAGEMENT, miir);
252 miir = CSR_READ_4(sc, MY_MANAGEMENT);
253 if (miir & MY_MASK_MIIR_MII_MDI)
256 /* high MDC, and wait */
257 miir |= MY_MASK_MIIR_MII_MDC;
258 CSR_WRITE_4(sc, MY_MANAGEMENT, miir);
266 miir &= ~MY_MASK_MIIR_MII_MDC;
267 CSR_WRITE_4(sc, MY_MANAGEMENT, miir);
270 return (u_int16_t) data;
275 my_phy_writereg(struct my_softc * sc, int reg, int data)
282 if (sc->my_info->my_did == MTD803ID)
283 CSR_WRITE_2(sc, MY_PHYBASE + reg * 2, data);
285 miir = my_send_cmd_to_phy(sc, MY_OP_WRITE, reg);
290 /* low MDC, prepare MDO */
291 miir &= ~(MY_MASK_MIIR_MII_MDC + MY_MASK_MIIR_MII_MDO);
293 miir |= MY_MASK_MIIR_MII_MDO;
294 CSR_WRITE_4(sc, MY_MANAGEMENT, miir);
298 miir |= MY_MASK_MIIR_MII_MDC;
299 CSR_WRITE_4(sc, MY_MANAGEMENT, miir);
307 miir &= ~MY_MASK_MIIR_MII_MDC;
308 CSR_WRITE_4(sc, MY_MANAGEMENT, miir);
315 * Program the 64-bit multicast hash filter.
318 my_setmulti(struct my_softc * sc)
322 u_int32_t hashes[2] = {0, 0};
323 struct ifmultiaddr *ifma;
331 rxfilt = CSR_READ_4(sc, MY_TCRRCR);
333 if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
335 CSR_WRITE_4(sc, MY_TCRRCR, rxfilt);
336 CSR_WRITE_4(sc, MY_MAR0, 0xFFFFFFFF);
337 CSR_WRITE_4(sc, MY_MAR1, 0xFFFFFFFF);
341 /* first, zot all the existing hash bits */
342 CSR_WRITE_4(sc, MY_MAR0, 0);
343 CSR_WRITE_4(sc, MY_MAR1, 0);
345 /* now program new ones */
347 TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
348 if (ifma->ifma_addr->sa_family != AF_LINK)
350 h = ~ether_crc32_be(LLADDR((struct sockaddr_dl *)
351 ifma->ifma_addr), ETHER_ADDR_LEN) >> 26;
353 hashes[0] |= (1 << h);
355 hashes[1] |= (1 << (h - 32));
364 CSR_WRITE_4(sc, MY_MAR0, hashes[0]);
365 CSR_WRITE_4(sc, MY_MAR1, hashes[1]);
366 CSR_WRITE_4(sc, MY_TCRRCR, rxfilt);
371 * Initiate an autonegotiation session.
374 my_autoneg_xmit(struct my_softc * sc)
376 u_int16_t phy_sts = 0;
380 my_phy_writereg(sc, PHY_BMCR, PHY_BMCR_RESET);
382 while (my_phy_readreg(sc, PHY_BMCR) & PHY_BMCR_RESET);
384 phy_sts = my_phy_readreg(sc, PHY_BMCR);
385 phy_sts |= PHY_BMCR_AUTONEGENBL | PHY_BMCR_AUTONEGRSTR;
386 my_phy_writereg(sc, PHY_BMCR, phy_sts);
393 * Invoke autonegotiation on a PHY.
396 my_autoneg_mii(struct my_softc * sc, int flag, int verbose)
398 u_int16_t phy_sts = 0, media, advert, ability;
399 u_int16_t ability2 = 0;
408 ifm->ifm_media = IFM_ETHER | IFM_AUTO;
410 #ifndef FORCE_AUTONEG_TFOUR
412 * First, see if autoneg is supported. If not, there's no point in
415 phy_sts = my_phy_readreg(sc, PHY_BMSR);
416 if (!(phy_sts & PHY_BMSR_CANAUTONEG)) {
418 if_printf(ifp, "autonegotiation not supported\n");
419 ifm->ifm_media = IFM_ETHER | IFM_10_T | IFM_HDX;
424 case MY_FLAG_FORCEDELAY:
426 * XXX Never use this option anywhere but in the probe
427 * routine: making the kernel stop dead in its tracks for
428 * three whole seconds after we've gone multi-user is really
434 case MY_FLAG_SCHEDDELAY:
436 * Wait for the transmitter to go idle before starting an
437 * autoneg session, otherwise my_start() may clobber our
438 * timeout, and we don't want to allow transmission during an
439 * autoneg session since that can screw it up.
441 if (sc->my_cdata.my_tx_head != NULL) {
442 sc->my_want_auto = 1;
449 sc->my_want_auto = 0;
451 case MY_FLAG_DELAYTIMEO:
456 if_printf(ifp, "invalid autoneg flag: %d\n", flag);
460 if (my_phy_readreg(sc, PHY_BMSR) & PHY_BMSR_AUTONEGCOMP) {
462 if_printf(ifp, "autoneg complete, ");
463 phy_sts = my_phy_readreg(sc, PHY_BMSR);
466 if_printf(ifp, "autoneg not complete, ");
469 media = my_phy_readreg(sc, PHY_BMCR);
471 /* Link is good. Report modes and set duplex mode. */
472 if (my_phy_readreg(sc, PHY_BMSR) & PHY_BMSR_LINKSTAT) {
474 if_printf(ifp, "link status good. ");
475 advert = my_phy_readreg(sc, PHY_ANAR);
476 ability = my_phy_readreg(sc, PHY_LPAR);
477 if ((sc->my_pinfo->my_vid == MarvellPHYID0) ||
478 (sc->my_pinfo->my_vid == LevelOnePHYID0)) {
479 ability2 = my_phy_readreg(sc, PHY_1000SR);
480 if (ability2 & PHY_1000SR_1000BTXFULL) {
484 * this version did not support 1000M,
486 * IFM_ETHER|IFM_1000_T|IFM_FDX;
489 IFM_ETHER | IFM_100_TX | IFM_FDX;
490 media &= ~PHY_BMCR_SPEEDSEL;
491 media |= PHY_BMCR_1000;
492 media |= PHY_BMCR_DUPLEX;
493 printf("(full-duplex, 1000Mbps)\n");
494 } else if (ability2 & PHY_1000SR_1000BTXHALF) {
498 * this version did not support 1000M,
499 * ifm->ifm_media = IFM_ETHER|IFM_1000_T;
501 ifm->ifm_media = IFM_ETHER | IFM_100_TX;
502 media &= ~PHY_BMCR_SPEEDSEL;
503 media &= ~PHY_BMCR_DUPLEX;
504 media |= PHY_BMCR_1000;
505 printf("(half-duplex, 1000Mbps)\n");
508 if (advert & PHY_ANAR_100BT4 && ability & PHY_ANAR_100BT4) {
509 ifm->ifm_media = IFM_ETHER | IFM_100_T4;
510 media |= PHY_BMCR_SPEEDSEL;
511 media &= ~PHY_BMCR_DUPLEX;
512 printf("(100baseT4)\n");
513 } else if (advert & PHY_ANAR_100BTXFULL &&
514 ability & PHY_ANAR_100BTXFULL) {
515 ifm->ifm_media = IFM_ETHER | IFM_100_TX | IFM_FDX;
516 media |= PHY_BMCR_SPEEDSEL;
517 media |= PHY_BMCR_DUPLEX;
518 printf("(full-duplex, 100Mbps)\n");
519 } else if (advert & PHY_ANAR_100BTXHALF &&
520 ability & PHY_ANAR_100BTXHALF) {
521 ifm->ifm_media = IFM_ETHER | IFM_100_TX | IFM_HDX;
522 media |= PHY_BMCR_SPEEDSEL;
523 media &= ~PHY_BMCR_DUPLEX;
524 printf("(half-duplex, 100Mbps)\n");
525 } else if (advert & PHY_ANAR_10BTFULL &&
526 ability & PHY_ANAR_10BTFULL) {
527 ifm->ifm_media = IFM_ETHER | IFM_10_T | IFM_FDX;
528 media &= ~PHY_BMCR_SPEEDSEL;
529 media |= PHY_BMCR_DUPLEX;
530 printf("(full-duplex, 10Mbps)\n");
532 ifm->ifm_media = IFM_ETHER | IFM_10_T | IFM_HDX;
533 media &= ~PHY_BMCR_SPEEDSEL;
534 media &= ~PHY_BMCR_DUPLEX;
535 printf("(half-duplex, 10Mbps)\n");
537 media &= ~PHY_BMCR_AUTONEGENBL;
539 /* Set ASIC's duplex mode to match the PHY. */
540 my_phy_writereg(sc, PHY_BMCR, media);
541 my_setcfg(sc, media);
544 if_printf(ifp, "no carrier\n");
548 if (sc->my_tx_pend) {
551 my_start_locked(ifp);
557 * To get PHY ability.
560 my_getmode_mii(struct my_softc * sc)
567 bmsr = my_phy_readreg(sc, PHY_BMSR);
569 if_printf(ifp, "PHY status word: %x\n", bmsr);
572 sc->ifmedia.ifm_media = IFM_ETHER | IFM_10_T | IFM_HDX;
574 if (bmsr & PHY_BMSR_10BTHALF) {
576 if_printf(ifp, "10Mbps half-duplex mode supported\n");
577 ifmedia_add(&sc->ifmedia, IFM_ETHER | IFM_10_T | IFM_HDX,
579 ifmedia_add(&sc->ifmedia, IFM_ETHER | IFM_10_T, 0, NULL);
581 if (bmsr & PHY_BMSR_10BTFULL) {
583 if_printf(ifp, "10Mbps full-duplex mode supported\n");
585 ifmedia_add(&sc->ifmedia, IFM_ETHER | IFM_10_T | IFM_FDX,
587 sc->ifmedia.ifm_media = IFM_ETHER | IFM_10_T | IFM_FDX;
589 if (bmsr & PHY_BMSR_100BTXHALF) {
591 if_printf(ifp, "100Mbps half-duplex mode supported\n");
592 ifp->if_baudrate = 100000000;
593 ifmedia_add(&sc->ifmedia, IFM_ETHER | IFM_100_TX, 0, NULL);
594 ifmedia_add(&sc->ifmedia, IFM_ETHER | IFM_100_TX | IFM_HDX,
596 sc->ifmedia.ifm_media = IFM_ETHER | IFM_100_TX | IFM_HDX;
598 if (bmsr & PHY_BMSR_100BTXFULL) {
600 if_printf(ifp, "100Mbps full-duplex mode supported\n");
601 ifp->if_baudrate = 100000000;
602 ifmedia_add(&sc->ifmedia, IFM_ETHER | IFM_100_TX | IFM_FDX,
604 sc->ifmedia.ifm_media = IFM_ETHER | IFM_100_TX | IFM_FDX;
606 /* Some also support 100BaseT4. */
607 if (bmsr & PHY_BMSR_100BT4) {
609 if_printf(ifp, "100baseT4 mode supported\n");
610 ifp->if_baudrate = 100000000;
611 ifmedia_add(&sc->ifmedia, IFM_ETHER | IFM_100_T4, 0, NULL);
612 sc->ifmedia.ifm_media = IFM_ETHER | IFM_100_T4;
613 #ifdef FORCE_AUTONEG_TFOUR
615 if_printf(ifp, "forcing on autoneg support for BT4\n");
616 ifmedia_add(&sc->ifmedia, IFM_ETHER | IFM_AUTO, 0 NULL):
617 sc->ifmedia.ifm_media = IFM_ETHER | IFM_AUTO;
620 #if 0 /* this version did not support 1000M, */
621 if (sc->my_pinfo->my_vid == MarvellPHYID0) {
623 if_printf(ifp, "1000Mbps half-duplex mode supported\n");
625 ifp->if_baudrate = 1000000000;
626 ifmedia_add(&sc->ifmedia, IFM_ETHER | IFM_1000_T, 0, NULL);
627 ifmedia_add(&sc->ifmedia, IFM_ETHER | IFM_1000_T | IFM_HDX,
630 if_printf(ifp, "1000Mbps full-duplex mode supported\n");
631 ifp->if_baudrate = 1000000000;
632 ifmedia_add(&sc->ifmedia, IFM_ETHER | IFM_1000_T | IFM_FDX,
634 sc->ifmedia.ifm_media = IFM_ETHER | IFM_1000_T | IFM_FDX;
637 if (bmsr & PHY_BMSR_CANAUTONEG) {
639 if_printf(ifp, "autoneg supported\n");
640 ifmedia_add(&sc->ifmedia, IFM_ETHER | IFM_AUTO, 0, NULL);
641 sc->ifmedia.ifm_media = IFM_ETHER | IFM_AUTO;
647 * Set speed and duplex mode.
650 my_setmode_mii(struct my_softc * sc, int media)
658 * If an autoneg session is in progress, stop it.
660 if (sc->my_autoneg) {
661 if_printf(ifp, "canceling autoneg session\n");
662 ifp->if_timer = sc->my_autoneg = sc->my_want_auto = 0;
663 bmcr = my_phy_readreg(sc, PHY_BMCR);
664 bmcr &= ~PHY_BMCR_AUTONEGENBL;
665 my_phy_writereg(sc, PHY_BMCR, bmcr);
667 if_printf(ifp, "selecting MII, ");
668 bmcr = my_phy_readreg(sc, PHY_BMCR);
669 bmcr &= ~(PHY_BMCR_AUTONEGENBL | PHY_BMCR_SPEEDSEL | PHY_BMCR_1000 |
670 PHY_BMCR_DUPLEX | PHY_BMCR_LOOPBK);
672 #if 0 /* this version did not support 1000M, */
673 if (IFM_SUBTYPE(media) == IFM_1000_T) {
674 printf("1000Mbps/T4, half-duplex\n");
675 bmcr &= ~PHY_BMCR_SPEEDSEL;
676 bmcr &= ~PHY_BMCR_DUPLEX;
677 bmcr |= PHY_BMCR_1000;
680 if (IFM_SUBTYPE(media) == IFM_100_T4) {
681 printf("100Mbps/T4, half-duplex\n");
682 bmcr |= PHY_BMCR_SPEEDSEL;
683 bmcr &= ~PHY_BMCR_DUPLEX;
685 if (IFM_SUBTYPE(media) == IFM_100_TX) {
687 bmcr |= PHY_BMCR_SPEEDSEL;
689 if (IFM_SUBTYPE(media) == IFM_10_T) {
691 bmcr &= ~PHY_BMCR_SPEEDSEL;
693 if ((media & IFM_GMASK) == IFM_FDX) {
694 printf("full duplex\n");
695 bmcr |= PHY_BMCR_DUPLEX;
697 printf("half duplex\n");
698 bmcr &= ~PHY_BMCR_DUPLEX;
700 my_phy_writereg(sc, PHY_BMCR, bmcr);
706 * The Myson manual states that in order to fiddle with the 'full-duplex' and
707 * '100Mbps' bits in the netconfig register, we first have to put the
708 * transmit and/or receive logic in the idle state.
711 my_setcfg(struct my_softc * sc, int bmcr)
716 if (CSR_READ_4(sc, MY_TCRRCR) & (MY_TE | MY_RE)) {
718 MY_CLRBIT(sc, MY_TCRRCR, (MY_TE | MY_RE));
719 for (i = 0; i < MY_TIMEOUT; i++) {
721 if (!(CSR_READ_4(sc, MY_TCRRCR) &
722 (MY_TXRUN | MY_RXRUN)))
726 if_printf(sc->my_ifp,
727 "failed to force tx and rx to idle \n");
729 MY_CLRBIT(sc, MY_TCRRCR, MY_PS1000);
730 MY_CLRBIT(sc, MY_TCRRCR, MY_PS10);
731 if (bmcr & PHY_BMCR_1000)
732 MY_SETBIT(sc, MY_TCRRCR, MY_PS1000);
733 else if (!(bmcr & PHY_BMCR_SPEEDSEL))
734 MY_SETBIT(sc, MY_TCRRCR, MY_PS10);
735 if (bmcr & PHY_BMCR_DUPLEX)
736 MY_SETBIT(sc, MY_TCRRCR, MY_FD);
738 MY_CLRBIT(sc, MY_TCRRCR, MY_FD);
740 MY_SETBIT(sc, MY_TCRRCR, MY_TE | MY_RE);
745 my_reset(struct my_softc * sc)
750 MY_SETBIT(sc, MY_BCR, MY_SWR);
751 for (i = 0; i < MY_TIMEOUT; i++) {
753 if (!(CSR_READ_4(sc, MY_BCR) & MY_SWR))
757 if_printf(sc->my_ifp, "reset never completed!\n");
759 /* Wait a little while for the chip to get its brains in order. */
765 * Probe for a Myson chip. Check the PCI vendor and device IDs against our
766 * list and return a device name if we find a match.
769 my_probe(device_t dev)
774 while (t->my_name != NULL) {
775 if ((pci_get_vendor(dev) == t->my_vid) &&
776 (pci_get_device(dev) == t->my_did)) {
777 device_set_desc(dev, t->my_name);
779 return (BUS_PROBE_DEFAULT);
787 * Attach the interface. Allocate softc structures, do ifmedia setup and
788 * ethernet/BPF attach.
791 my_attach(device_t dev)
794 u_char eaddr[ETHER_ADDR_LEN];
798 int media = IFM_ETHER | IFM_100_TX | IFM_FDX;
802 u_int16_t phy_vid, phy_did, phy_sts = 0;
805 sc = device_get_softc(dev);
806 mtx_init(&sc->my_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
810 * Map control/status registers.
812 pci_enable_busmaster(dev);
814 if (my_info_tmp->my_did == MTD800ID) {
815 iobase = pci_read_config(dev, MY_PCI_LOIO, 4);
821 sc->my_res = bus_alloc_resource_any(dev, MY_RES, &rid, RF_ACTIVE);
823 if (sc->my_res == NULL) {
824 device_printf(dev, "couldn't map ports/memory\n");
828 sc->my_btag = rman_get_bustag(sc->my_res);
829 sc->my_bhandle = rman_get_bushandle(sc->my_res);
832 sc->my_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
833 RF_SHAREABLE | RF_ACTIVE);
835 if (sc->my_irq == NULL) {
836 device_printf(dev, "couldn't map interrupt\n");
841 sc->my_info = my_info_tmp;
843 /* Reset the adapter. */
849 * Get station address
851 for (i = 0; i < ETHER_ADDR_LEN; ++i)
852 eaddr[i] = CSR_READ_1(sc, MY_PAR0 + i);
854 sc->my_ldata_ptr = malloc(sizeof(struct my_list_data) + 8,
856 if (sc->my_ldata_ptr == NULL) {
857 device_printf(dev, "no memory for list buffers!\n");
861 sc->my_ldata = (struct my_list_data *) sc->my_ldata_ptr;
862 round = (uintptr_t)sc->my_ldata_ptr & 0xF;
863 roundptr = sc->my_ldata_ptr;
864 for (i = 0; i < 8; i++) {
871 sc->my_ldata = (struct my_list_data *) roundptr;
872 bzero(sc->my_ldata, sizeof(struct my_list_data));
874 ifp = sc->my_ifp = if_alloc(IFT_ETHER);
876 device_printf(dev, "can not if_alloc()\n");
881 if_initname(ifp, device_get_name(dev), device_get_unit(dev));
882 ifp->if_mtu = ETHERMTU;
883 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
884 ifp->if_ioctl = my_ioctl;
885 ifp->if_start = my_start;
886 ifp->if_watchdog = my_watchdog;
887 ifp->if_init = my_init;
888 ifp->if_baudrate = 10000000;
889 ifp->if_snd.ifq_maxlen = IFQ_MAXLEN;
891 if (sc->my_info->my_did == MTD803ID)
892 sc->my_pinfo = my_phys;
895 device_printf(dev, "probing for a PHY\n");
897 for (i = MY_PHYADDR_MIN; i < MY_PHYADDR_MAX + 1; i++) {
899 device_printf(dev, "checking address: %d\n", i);
901 phy_sts = my_phy_readreg(sc, PHY_BMSR);
902 if ((phy_sts != 0) && (phy_sts != 0xffff))
908 phy_vid = my_phy_readreg(sc, PHY_VENID);
909 phy_did = my_phy_readreg(sc, PHY_DEVID);
911 device_printf(dev, "found PHY at address %d, ",
913 printf("vendor id: %x device id: %x\n",
918 if (phy_vid == p->my_vid) {
924 if (sc->my_pinfo == NULL)
925 sc->my_pinfo = &my_phys[PHY_UNKNOWN];
927 device_printf(dev, "PHY type: %s\n",
928 sc->my_pinfo->my_name);
931 device_printf(dev, "MII without any phy!\n");
938 /* Do ifmedia setup. */
939 ifmedia_init(&sc->ifmedia, 0, my_ifmedia_upd, my_ifmedia_sts);
942 my_autoneg_mii(sc, MY_FLAG_FORCEDELAY, 1);
943 media = sc->ifmedia.ifm_media;
946 ifmedia_set(&sc->ifmedia, media);
948 ether_ifattach(ifp, eaddr);
950 error = bus_setup_intr(dev, sc->my_irq, INTR_TYPE_NET | INTR_MPSAFE,
951 my_intr, sc, &sc->my_intrhand);
954 device_printf(dev, "couldn't set up irq\n");
965 free(sc->my_ldata_ptr, M_DEVBUF);
967 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->my_irq);
969 bus_release_resource(dev, MY_RES, MY_RID, sc->my_res);
971 mtx_destroy(&sc->my_mtx);
976 my_detach(device_t dev)
981 sc = device_get_softc(dev);
985 bus_teardown_intr(dev, sc->my_irq, sc->my_intrhand);
990 free(sc->my_ldata_ptr, M_DEVBUF);
992 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->my_irq);
993 bus_release_resource(dev, MY_RES, MY_RID, sc->my_res);
994 mtx_destroy(&sc->my_mtx);
1000 * Initialize the transmit descriptors.
1003 my_list_tx_init(struct my_softc * sc)
1005 struct my_chain_data *cd;
1006 struct my_list_data *ld;
1012 for (i = 0; i < MY_TX_LIST_CNT; i++) {
1013 cd->my_tx_chain[i].my_ptr = &ld->my_tx_list[i];
1014 if (i == (MY_TX_LIST_CNT - 1))
1015 cd->my_tx_chain[i].my_nextdesc = &cd->my_tx_chain[0];
1017 cd->my_tx_chain[i].my_nextdesc =
1018 &cd->my_tx_chain[i + 1];
1020 cd->my_tx_free = &cd->my_tx_chain[0];
1021 cd->my_tx_tail = cd->my_tx_head = NULL;
1026 * Initialize the RX descriptors and allocate mbufs for them. Note that we
1027 * arrange the descriptors in a closed ring, so that the last descriptor
1028 * points back to the first.
1031 my_list_rx_init(struct my_softc * sc)
1033 struct my_chain_data *cd;
1034 struct my_list_data *ld;
1040 for (i = 0; i < MY_RX_LIST_CNT; i++) {
1041 cd->my_rx_chain[i].my_ptr =
1042 (struct my_desc *) & ld->my_rx_list[i];
1043 if (my_newbuf(sc, &cd->my_rx_chain[i]) == ENOBUFS) {
1047 if (i == (MY_RX_LIST_CNT - 1)) {
1048 cd->my_rx_chain[i].my_nextdesc = &cd->my_rx_chain[0];
1049 ld->my_rx_list[i].my_next = vtophys(&ld->my_rx_list[0]);
1051 cd->my_rx_chain[i].my_nextdesc =
1052 &cd->my_rx_chain[i + 1];
1053 ld->my_rx_list[i].my_next =
1054 vtophys(&ld->my_rx_list[i + 1]);
1057 cd->my_rx_head = &cd->my_rx_chain[0];
1062 * Initialize an RX descriptor and attach an MBUF cluster.
1065 my_newbuf(struct my_softc * sc, struct my_chain_onefrag * c)
1067 struct mbuf *m_new = NULL;
1070 MGETHDR(m_new, M_DONTWAIT, MT_DATA);
1071 if (m_new == NULL) {
1072 if_printf(sc->my_ifp,
1073 "no memory for rx list -- packet dropped!\n");
1076 MCLGET(m_new, M_DONTWAIT);
1077 if (!(m_new->m_flags & M_EXT)) {
1078 if_printf(sc->my_ifp,
1079 "no memory for rx list -- packet dropped!\n");
1084 c->my_ptr->my_data = vtophys(mtod(m_new, caddr_t));
1085 c->my_ptr->my_ctl = (MCLBYTES - 1) << MY_RBSShift;
1086 c->my_ptr->my_status = MY_OWNByNIC;
1091 * A frame has been uploaded: pass the resulting mbuf chain up to the higher
1095 my_rxeof(struct my_softc * sc)
1097 struct ether_header *eh;
1100 struct my_chain_onefrag *cur_rx;
1106 while (!((rxstat = sc->my_cdata.my_rx_head->my_ptr->my_status)
1108 cur_rx = sc->my_cdata.my_rx_head;
1109 sc->my_cdata.my_rx_head = cur_rx->my_nextdesc;
1111 if (rxstat & MY_ES) { /* error summary: give up this rx pkt */
1113 cur_rx->my_ptr->my_status = MY_OWNByNIC;
1116 /* No errors; receive the packet. */
1117 total_len = (rxstat & MY_FLNGMASK) >> MY_FLNGShift;
1118 total_len -= ETHER_CRC_LEN;
1120 if (total_len < MINCLSIZE) {
1121 m = m_devget(mtod(cur_rx->my_mbuf, char *),
1122 total_len, 0, ifp, NULL);
1123 cur_rx->my_ptr->my_status = MY_OWNByNIC;
1129 m = cur_rx->my_mbuf;
1131 * Try to conjure up a new mbuf cluster. If that
1132 * fails, it means we have an out of memory condition
1133 * and should leave the buffer in place and continue.
1134 * This will result in a lost packet, but there's
1135 * little else we can do in this situation.
1137 if (my_newbuf(sc, cur_rx) == ENOBUFS) {
1139 cur_rx->my_ptr->my_status = MY_OWNByNIC;
1142 m->m_pkthdr.rcvif = ifp;
1143 m->m_pkthdr.len = m->m_len = total_len;
1146 eh = mtod(m, struct ether_header *);
1149 * Handle BPF listeners. Let the BPF user see the packet, but
1150 * don't pass it up to the ether_input() layer unless it's a
1151 * broadcast packet, multicast packet, matches our ethernet
1152 * address or the interface is in promiscuous mode.
1156 if (ifp->if_flags & IFF_PROMISC &&
1157 (bcmp(eh->ether_dhost, IF_LLADDR(sc->my_ifp),
1159 (eh->ether_dhost[0] & 1) == 0)) {
1166 (*ifp->if_input)(ifp, m);
1174 * A frame was downloaded to the chip. It's safe for us to clean up the list
1178 my_txeof(struct my_softc * sc)
1180 struct my_chain *cur_tx;
1185 /* Clear the timeout timer. */
1187 if (sc->my_cdata.my_tx_head == NULL) {
1191 * Go through our tx list and free mbufs for those frames that have
1194 while (sc->my_cdata.my_tx_head->my_mbuf != NULL) {
1197 cur_tx = sc->my_cdata.my_tx_head;
1198 txstat = MY_TXSTATUS(cur_tx);
1199 if ((txstat & MY_OWNByNIC) || txstat == MY_UNSENT)
1201 if (!(CSR_READ_4(sc, MY_TCRRCR) & MY_Enhanced)) {
1202 if (txstat & MY_TXERR) {
1204 if (txstat & MY_EC) /* excessive collision */
1205 ifp->if_collisions++;
1206 if (txstat & MY_LC) /* late collision */
1207 ifp->if_collisions++;
1209 ifp->if_collisions += (txstat & MY_NCRMASK) >>
1213 m_freem(cur_tx->my_mbuf);
1214 cur_tx->my_mbuf = NULL;
1215 if (sc->my_cdata.my_tx_head == sc->my_cdata.my_tx_tail) {
1216 sc->my_cdata.my_tx_head = NULL;
1217 sc->my_cdata.my_tx_tail = NULL;
1220 sc->my_cdata.my_tx_head = cur_tx->my_nextdesc;
1222 if (CSR_READ_4(sc, MY_TCRRCR) & MY_Enhanced) {
1223 ifp->if_collisions += (CSR_READ_4(sc, MY_TSR) & MY_NCRMask);
1229 * TX 'end of channel' interrupt handler.
1232 my_txeoc(struct my_softc * sc)
1239 if (sc->my_cdata.my_tx_head == NULL) {
1240 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
1241 sc->my_cdata.my_tx_tail = NULL;
1242 if (sc->my_want_auto)
1243 my_autoneg_mii(sc, MY_FLAG_SCHEDDELAY, 1);
1245 if (MY_TXOWN(sc->my_cdata.my_tx_head) == MY_UNSENT) {
1246 MY_TXOWN(sc->my_cdata.my_tx_head) = MY_OWNByNIC;
1248 CSR_WRITE_4(sc, MY_TXPDR, 0xFFFFFFFF);
1257 struct my_softc *sc;
1264 if (!(ifp->if_flags & IFF_UP)) {
1268 /* Disable interrupts. */
1269 CSR_WRITE_4(sc, MY_IMR, 0x00000000);
1272 status = CSR_READ_4(sc, MY_ISR);
1275 CSR_WRITE_4(sc, MY_ISR, status);
1279 if (status & MY_RI) /* receive interrupt */
1282 if ((status & MY_RBU) || (status & MY_RxErr)) {
1283 /* rx buffer unavailable or rx error */
1291 if (status & MY_TI) /* tx interrupt */
1293 if (status & MY_ETI) /* tx early interrupt */
1295 if (status & MY_TBU) /* tx buffer unavailable */
1298 #if 0 /* 90/1/18 delete */
1299 if (status & MY_FBE) {
1307 /* Re-enable interrupts. */
1308 CSR_WRITE_4(sc, MY_IMR, MY_INTRS);
1309 if (ifp->if_snd.ifq_head != NULL)
1310 my_start_locked(ifp);
1316 * Encapsulate an mbuf chain in a descriptor by coupling the mbuf data
1317 * pointers to the fragment pointers.
1320 my_encap(struct my_softc * sc, struct my_chain * c, struct mbuf * m_head)
1322 struct my_desc *f = NULL;
1324 struct mbuf *m, *m_new = NULL;
1327 /* calculate the total tx pkt length */
1329 for (m = m_head; m != NULL; m = m->m_next)
1330 total_len += m->m_len;
1332 * Start packing the mbufs in this chain into the fragment pointers.
1333 * Stop when we run out of fragments or hit the end of the mbuf
1337 MGETHDR(m_new, M_DONTWAIT, MT_DATA);
1338 if (m_new == NULL) {
1339 if_printf(sc->my_ifp, "no memory for tx list");
1342 if (m_head->m_pkthdr.len > MHLEN) {
1343 MCLGET(m_new, M_DONTWAIT);
1344 if (!(m_new->m_flags & M_EXT)) {
1346 if_printf(sc->my_ifp, "no memory for tx list");
1350 m_copydata(m_head, 0, m_head->m_pkthdr.len, mtod(m_new, caddr_t));
1351 m_new->m_pkthdr.len = m_new->m_len = m_head->m_pkthdr.len;
1354 f = &c->my_ptr->my_frag[0];
1356 f->my_data = vtophys(mtod(m_new, caddr_t));
1357 total_len = m_new->m_len;
1358 f->my_ctl = MY_TXFD | MY_TXLD | MY_CRCEnable | MY_PADEnable;
1359 f->my_ctl |= total_len << MY_PKTShift; /* pkt size */
1360 f->my_ctl |= total_len; /* buffer size */
1361 /* 89/12/29 add, for mtd891 *//* [ 89? ] */
1362 if (sc->my_info->my_did == MTD891ID)
1363 f->my_ctl |= MY_ETIControl | MY_RetryTxLC;
1364 c->my_mbuf = m_head;
1366 MY_TXNEXT(c) = vtophys(&c->my_nextdesc->my_ptr->my_frag[0]);
1371 * Main transmit routine. To avoid having to do mbuf copies, we put pointers
1372 * to the mbuf data regions directly in the transmit lists. We also save a
1373 * copy of the pointers since the transmit list fragment pointers are
1374 * physical addresses.
1377 my_start(struct ifnet * ifp)
1379 struct my_softc *sc;
1383 my_start_locked(ifp);
1388 my_start_locked(struct ifnet * ifp)
1390 struct my_softc *sc;
1391 struct mbuf *m_head = NULL;
1392 struct my_chain *cur_tx = NULL, *start_tx;
1396 if (sc->my_autoneg) {
1401 * Check for an available queue slot. If there are none, punt.
1403 if (sc->my_cdata.my_tx_free->my_mbuf != NULL) {
1404 ifp->if_drv_flags |= IFF_DRV_OACTIVE;
1407 start_tx = sc->my_cdata.my_tx_free;
1408 while (sc->my_cdata.my_tx_free->my_mbuf == NULL) {
1409 IF_DEQUEUE(&ifp->if_snd, m_head);
1413 /* Pick a descriptor off the free list. */
1414 cur_tx = sc->my_cdata.my_tx_free;
1415 sc->my_cdata.my_tx_free = cur_tx->my_nextdesc;
1417 /* Pack the data into the descriptor. */
1418 my_encap(sc, cur_tx, m_head);
1420 if (cur_tx != start_tx)
1421 MY_TXOWN(cur_tx) = MY_OWNByNIC;
1424 * If there's a BPF listener, bounce a copy of this frame to
1427 BPF_MTAP(ifp, cur_tx->my_mbuf);
1431 * If there are no packets queued, bail.
1433 if (cur_tx == NULL) {
1437 * Place the request for the upload interrupt in the last descriptor
1438 * in the chain. This way, if we're chaining several packets at once,
1439 * we'll only get an interupt once for the whole chain rather than
1440 * once for each packet.
1442 MY_TXCTL(cur_tx) |= MY_TXIC;
1443 cur_tx->my_ptr->my_frag[0].my_ctl |= MY_TXIC;
1444 sc->my_cdata.my_tx_tail = cur_tx;
1445 if (sc->my_cdata.my_tx_head == NULL)
1446 sc->my_cdata.my_tx_head = start_tx;
1447 MY_TXOWN(start_tx) = MY_OWNByNIC;
1448 CSR_WRITE_4(sc, MY_TXPDR, 0xFFFFFFFF); /* tx polling demand */
1451 * Set a timeout in case the chip goes out to lunch.
1460 struct my_softc *sc = xsc;
1468 my_init_locked(struct my_softc *sc)
1470 struct ifnet *ifp = sc->my_ifp;
1471 u_int16_t phy_bmcr = 0;
1474 if (sc->my_autoneg) {
1477 if (sc->my_pinfo != NULL)
1478 phy_bmcr = my_phy_readreg(sc, PHY_BMCR);
1480 * Cancel pending I/O and free all RX/TX buffers.
1486 * Set cache alignment and burst length.
1488 #if 0 /* 89/9/1 modify, */
1489 CSR_WRITE_4(sc, MY_BCR, MY_RPBLE512);
1490 CSR_WRITE_4(sc, MY_TCRRCR, MY_TFTSF);
1492 CSR_WRITE_4(sc, MY_BCR, MY_PBL8);
1493 CSR_WRITE_4(sc, MY_TCRRCR, MY_TFTSF | MY_RBLEN | MY_RPBLE512);
1495 * 89/12/29 add, for mtd891,
1497 if (sc->my_info->my_did == MTD891ID) {
1498 MY_SETBIT(sc, MY_BCR, MY_PROG);
1499 MY_SETBIT(sc, MY_TCRRCR, MY_Enhanced);
1501 my_setcfg(sc, phy_bmcr);
1502 /* Init circular RX list. */
1503 if (my_list_rx_init(sc) == ENOBUFS) {
1504 if_printf(ifp, "init failed: no memory for rx buffers\n");
1508 /* Init TX descriptors. */
1509 my_list_tx_init(sc);
1511 /* If we want promiscuous mode, set the allframes bit. */
1512 if (ifp->if_flags & IFF_PROMISC)
1513 MY_SETBIT(sc, MY_TCRRCR, MY_PROM);
1515 MY_CLRBIT(sc, MY_TCRRCR, MY_PROM);
1518 * Set capture broadcast bit to capture broadcast frames.
1520 if (ifp->if_flags & IFF_BROADCAST)
1521 MY_SETBIT(sc, MY_TCRRCR, MY_AB);
1523 MY_CLRBIT(sc, MY_TCRRCR, MY_AB);
1526 * Program the multicast filter, if necessary.
1531 * Load the address of the RX list.
1533 MY_CLRBIT(sc, MY_TCRRCR, MY_RE);
1534 CSR_WRITE_4(sc, MY_RXLBA, vtophys(&sc->my_ldata->my_rx_list[0]));
1537 * Enable interrupts.
1539 CSR_WRITE_4(sc, MY_IMR, MY_INTRS);
1540 CSR_WRITE_4(sc, MY_ISR, 0xFFFFFFFF);
1542 /* Enable receiver and transmitter. */
1543 MY_SETBIT(sc, MY_TCRRCR, MY_RE);
1544 MY_CLRBIT(sc, MY_TCRRCR, MY_TE);
1545 CSR_WRITE_4(sc, MY_TXLBA, vtophys(&sc->my_ldata->my_tx_list[0]));
1546 MY_SETBIT(sc, MY_TCRRCR, MY_TE);
1548 /* Restore state of BMCR */
1549 if (sc->my_pinfo != NULL)
1550 my_phy_writereg(sc, PHY_BMCR, phy_bmcr);
1551 ifp->if_drv_flags |= IFF_DRV_RUNNING;
1552 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
1557 * Set media options.
1561 my_ifmedia_upd(struct ifnet * ifp)
1563 struct my_softc *sc;
1564 struct ifmedia *ifm;
1569 if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER) {
1573 if (IFM_SUBTYPE(ifm->ifm_media) == IFM_AUTO)
1574 my_autoneg_mii(sc, MY_FLAG_SCHEDDELAY, 1);
1576 my_setmode_mii(sc, ifm->ifm_media);
1582 * Report current media status.
1586 my_ifmedia_sts(struct ifnet * ifp, struct ifmediareq * ifmr)
1588 struct my_softc *sc;
1589 u_int16_t advert = 0, ability = 0;
1593 ifmr->ifm_active = IFM_ETHER;
1594 if (!(my_phy_readreg(sc, PHY_BMCR) & PHY_BMCR_AUTONEGENBL)) {
1595 #if 0 /* this version did not support 1000M, */
1596 if (my_phy_readreg(sc, PHY_BMCR) & PHY_BMCR_1000)
1597 ifmr->ifm_active = IFM_ETHER | IFM_1000TX;
1599 if (my_phy_readreg(sc, PHY_BMCR) & PHY_BMCR_SPEEDSEL)
1600 ifmr->ifm_active = IFM_ETHER | IFM_100_TX;
1602 ifmr->ifm_active = IFM_ETHER | IFM_10_T;
1603 if (my_phy_readreg(sc, PHY_BMCR) & PHY_BMCR_DUPLEX)
1604 ifmr->ifm_active |= IFM_FDX;
1606 ifmr->ifm_active |= IFM_HDX;
1611 ability = my_phy_readreg(sc, PHY_LPAR);
1612 advert = my_phy_readreg(sc, PHY_ANAR);
1614 #if 0 /* this version did not support 1000M, */
1615 if (sc->my_pinfo->my_vid = MarvellPHYID0) {
1616 ability2 = my_phy_readreg(sc, PHY_1000SR);
1617 if (ability2 & PHY_1000SR_1000BTXFULL) {
1620 ifmr->ifm_active = IFM_ETHER|IFM_1000_T|IFM_FDX;
1621 } else if (ability & PHY_1000SR_1000BTXHALF) {
1624 ifmr->ifm_active = IFM_ETHER|IFM_1000_T|IFM_HDX;
1628 if (advert & PHY_ANAR_100BT4 && ability & PHY_ANAR_100BT4)
1629 ifmr->ifm_active = IFM_ETHER | IFM_100_T4;
1630 else if (advert & PHY_ANAR_100BTXFULL && ability & PHY_ANAR_100BTXFULL)
1631 ifmr->ifm_active = IFM_ETHER | IFM_100_TX | IFM_FDX;
1632 else if (advert & PHY_ANAR_100BTXHALF && ability & PHY_ANAR_100BTXHALF)
1633 ifmr->ifm_active = IFM_ETHER | IFM_100_TX | IFM_HDX;
1634 else if (advert & PHY_ANAR_10BTFULL && ability & PHY_ANAR_10BTFULL)
1635 ifmr->ifm_active = IFM_ETHER | IFM_10_T | IFM_FDX;
1636 else if (advert & PHY_ANAR_10BTHALF && ability & PHY_ANAR_10BTHALF)
1637 ifmr->ifm_active = IFM_ETHER | IFM_10_T | IFM_HDX;
1643 my_ioctl(struct ifnet * ifp, u_long command, caddr_t data)
1645 struct my_softc *sc = ifp->if_softc;
1646 struct ifreq *ifr = (struct ifreq *) data;
1652 if (ifp->if_flags & IFF_UP)
1654 else if (ifp->if_drv_flags & IFF_DRV_RUNNING)
1668 error = ifmedia_ioctl(ifp, ifr, &sc->ifmedia, command);
1671 error = ether_ioctl(ifp, command, data);
1678 my_watchdog(struct ifnet * ifp)
1680 struct my_softc *sc;
1684 if (sc->my_autoneg) {
1685 my_autoneg_mii(sc, MY_FLAG_DELAYTIMEO, 1);
1690 if_printf(ifp, "watchdog timeout\n");
1691 if (!(my_phy_readreg(sc, PHY_BMSR) & PHY_BMSR_LINKSTAT))
1692 if_printf(ifp, "no carrier - transceiver cable problem?\n");
1696 if (ifp->if_snd.ifq_head != NULL)
1697 my_start_locked(ifp);
1704 * Stop the adapter and free any mbufs allocated to the RX and TX lists.
1707 my_stop(struct my_softc * sc)
1716 MY_CLRBIT(sc, MY_TCRRCR, (MY_RE | MY_TE));
1717 CSR_WRITE_4(sc, MY_IMR, 0x00000000);
1718 CSR_WRITE_4(sc, MY_TXLBA, 0x00000000);
1719 CSR_WRITE_4(sc, MY_RXLBA, 0x00000000);
1722 * Free data in the RX lists.
1724 for (i = 0; i < MY_RX_LIST_CNT; i++) {
1725 if (sc->my_cdata.my_rx_chain[i].my_mbuf != NULL) {
1726 m_freem(sc->my_cdata.my_rx_chain[i].my_mbuf);
1727 sc->my_cdata.my_rx_chain[i].my_mbuf = NULL;
1730 bzero((char *)&sc->my_ldata->my_rx_list,
1731 sizeof(sc->my_ldata->my_rx_list));
1733 * Free the TX list buffers.
1735 for (i = 0; i < MY_TX_LIST_CNT; i++) {
1736 if (sc->my_cdata.my_tx_chain[i].my_mbuf != NULL) {
1737 m_freem(sc->my_cdata.my_tx_chain[i].my_mbuf);
1738 sc->my_cdata.my_tx_chain[i].my_mbuf = NULL;
1741 bzero((char *)&sc->my_ldata->my_tx_list,
1742 sizeof(sc->my_ldata->my_tx_list));
1743 ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
1748 * Stop all chip I/O so that the kernel's probe routines don't get confused
1749 * by errant DMAs when rebooting.
1752 my_shutdown(device_t dev)
1754 struct my_softc *sc;
1756 sc = device_get_softc(dev);